I purchased this washer brand new just 2 years ago. It started making loud crackling noises approximately 3 mos ago. Yesterday it decided it did not want to spin or drain. Today a repairmen tells me its a wash. The computer screen has gone wacky and the cost to replace that will be well over $400, almost to the penny what I spent 2 years ago. This is not a good product Whirlpool and i trusted you since my previous washer lasted over 15 years. I need a refund and a new washer! Disgusted!

Buyer Beware!!!! Warning!!!! Dont buy Whirlpool. Youll be sorry if you do! Dont buy appliances from Home Depot. Youll be sorry if you do! Purchased new Whirlpool gas range 10/29/2019 from Home Depot. By February 2020 the front door fell off, its not cooking properly (18 min frozen pizza takes 30 mins to cook). Clock not keep correct time. Whirlpool unwilling to replace the unit while the third party repair company, “well you should have bought it from us, we stand behind what we sell.” They have no idea when or if the parts will ever come in due to COVID-19. Its been down 8 weeks now.Even under threat of a lawsuit Whirlpool said, Sorry we NOT replacing it, go ahead and sue us. We covered by our contractual warranty agreement. Home Depot said they are unable to help due to their contractual agreement with Whirlpool. I have a dozen hours invested talking Home Depot and Whirlpool on the phone and have no more information than I did a month ago. Whirlpool Case # **. Next step is small claims and public shaming of Whirlpool!

I hadnt had the machine. In no time, I started noticing brown rust looking spots on my whites and light colored clothing. I got to looking and had rusted out all around the bleach dispenser, entire area on the entire top. I was told to replace it. This would be about $200. Ridiculous!

My experience was terrible. We purchased a side by side refrigerator on June 27, 2011 and it stopped working in December, 2011. We reported this onDecember 19, 2011. A repairman was sent out a few days later, who could not solve the problem because a piece had to be ordered. The piece was ordered and the repairman came to install the part on December 28, 2011.The refrigerator is still not working at all. We have been without ice for this period of time, not to mention the inconvenience of non-refrigeration of food. I pleaded for them to pick up the refrigerator and give me even a partial refund. I was told that three repairs had to be done before they would even consider picking up the refrigerator. I am not a person who complains, but this was ridiculous. I will never purchase another Whirlpool product.

Good microwave and will have 1100 watts Of use for TV dinners and warm up food. Do well and goes well. Please use this as well to warm up TV dinners smaller than most. Test them and see what is best. Go.

I have a combo Microwave oven/oven GMC275PDS07. When the microwave is finished with the requested program, the end of program chime lets you know its done. Then, if the door is not opened for at least 3 seconds, the chime will ring again every minute thereafter ad nauseum. This will go on for hours without end. I know because I tried it. I reached out to Whirlpool via a web chat and my question was not even addressed. I was ignored. From reading other submissions, I assume this is de rigueur for Whirlpool. I then called Whirlpool and spoke to Katie in Tennessee. She was not able to bring up any make or model when I provided her the numbers exactly as listed on the inside of the door. She was not able to provide any respite from this annoying feature.This a Whirlpool Gold model, presumably the top of the line, in my book I will never purchase any Whirlpool product of any type and I will make it a point to let anyone who will listen that Whirlpool is not a manufacturer that takes its customers concerns seriously. Katie then advised that she looked up this feature and told me there is no way to turn the beeping off. I find this amusing since she could not find the model or serial number when I gave it to her.

My water heater stopped lighting. I found out that I needed to replace the thermocouple. I wasnt able to find the right one anywhere. I called whirlpool and they sent me the parts I needed totally free. I was so happy to get it in the mail the next day cause I have gone 1 week without hot water. I went to work and got a call that my kids are dizzy and throwing up. The house had filled with carbon monoxide. The only thing that saved us was the fact that my AC unit for the downstairs was broken, so it could spread the carbon monoxide to where we slept. The gas company said that we most definitely would have not woken up. I now have a notice for hazardous material on my house. I thought we all just caught the flu. I had no idea that we were being poisoned because of this damn water heater. I could scream. Im a single mother with four kids and a sick mother and cannot afford a plumber for this madness.

I am on my second Cabrio. The first one only lasted a few years, but I stayed with the Cabrio line because I didnt want to replace the dryer. That was my first mistake. The second Cabrio washer constantly leaves a white residue on dark clothing. I used an HE detergent, reduced the detergent and put the dark clothes through an extra rinse and still find residue that has to be scraped off. I called Whirlpool on Dec. 19th, 2018 to complain about this and was told there was no history reported of this kind of problem. Then I went on the ConsumerAffairs website to learn that many others have the same residue issue, among many other products. I will not ever purchase a Whirlpool machine of any kind again.

I am very disappointed in my Cabrio washer. I have had it for two year and now I have to spend $ 250.00 on a machine that sounds like Im in a machine factory. It is so loud in the spin cycle that you cant hear a TV or radio. Also the lit of the washer broke in the start of the second year. I had my previous washer for 15 years before requiring a service call. I have to agree with all the reviews that this washer should be recalled. Maybe if we all call the media in on this problem Whirlpool will be forced to pay for a recall or repairs. Another case of big business ripping off the consumer.

Cabrio Top Load Washer model WTW6800WW1 - Although we were very happy with the vendor where this was purchased and happy with the majority of the washer function; there is a problem with the cabinet & lid connectors rusting. Specifically, the lid connector on the left side totally rusted out, and also around the bleach cup, rust. There are also rust spots where the seam of the top section of the washer meets the bottom part. The washer was purchased in 2009. We have had it serviced in the past, prob 5 years ago, it needed a new motor and the rust was beginning to show then, while under warranty. I recently called Whirlpool and the associate told me that she had never received a call with regard to this type of problem. She did give me names and phone numbers of appliance repair in my area. I find it odd that Whirlpool would not make their associates aware of issues like this. I searched online and saw more than a few complaints about rust. So on it goes, no recourse, and as I read about the problem from others reporting this; it was mentioned that the vapors from the bleach cup etc, contribute to the rust. Additionally, even if it was under warranty, I was told that this is considered cosmetic and it would not be covered. Until... and I can only suppose, that until the lid possibly falls off while lifting, the cosmetic ruling may then turn into a function problem. Now there is also a squeaking sound, so off to call the appliance repair, check the cost and next time... buyer beware. I guess a lesson in science as well, hopefully this design flaw will be corrected for the next models in process.

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

We have had this water heater for less than 5 years. It was purchased new from Lowe’s. This is the second time we have had to replace the thermocouple and are told that we have to order the part from Whirlpool. Really? What do we do for hot water in the meantime? This is a very disappointing response from Whirlpool and Lowe’s. I will never again purchase anything from either company. We had to buy a new heater today, pay for installation and permits. This is a rip-off by Whirlpool and Lowe’s.

We purchased commercial washing machines for our building, we discovered that the clothes were coming out of the machines with dry spots and partials of soap. When we asked the dealer about this they sent a tech. to check the machines. It seems that these machines do not allow a adequate amount of water into the tub to wash the clothes. Only 6 or 7 inches of water is not enough water to wash a full load. When asked how this can be fixed I was told it cant be fixed. I was told this is a energy saving machine, which means you can only wash very small loads!What is the point of running a machine for twice the amount of time to do what you used to do in one load? Had we known this before purchasing what we felt was a quality machine, we are now stuck with machine not capable of doing what is required of them. When asked if they would take the machine back, no is all they say. I would never buy any product made by Whirlpool or Maytag because of the way this problem of ours has been handled. We purchased these machines from Prestige appliance, they have been good, but with no support from Whirlpool.

Cannot reinstall oven door after glass cleaning. The worst design and absolutely no support from Whirpool. They said the instructions are in the Manual. NOT TRUE!!!. The person on their helpline said she did herself. It is simple.. Total BS. Here is the link to hope to maybe get it fixed: ** Worst stove ever.

Since my review I have been corresponding with Whirlpool Customer Service (Chris). First he sent me an email and mailed a replacement board to have us (the homeowner) install. Because the cover was so melted, the replacement board would not fit down into it. I emailed pictures to Chris. Once he saw the pictures, he called me and arranged for the water heater to be replaced since it was still under warranty. He even extended the authorization code so we would have plenty of time to arrange for a plumber to do the work. We had to pay for the plumber, but Whirlpool arranged for us to have a new water heater. Now I can sleep at night without worrying that my house would burn down if the old water heater caught fire. Chris was GREAT to work with. I had a direct number to him and called any time I had a question. I was very impressed with Whirlpools Customer Service.

We bought a Whirlpool Gold French Door refrigerator in 2010. Just when the warranty period passed, the refrigerator started leaking water from the bottom floor. Initially, it only leaked about once per month. But as time passed, the refrigerator started leaking more often, and now its leaking every 2-3 days. I saw many people complaining on the same problem and some of them even submitted since 2006. I dont know why Whirlpool doesnt resolve this issue in many years.

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

My wife and I purchased a new Whirlpool Cabrio Washer / Dryer set approximately three years ago and have had nothing but problem after problem with these units. Weve had multiple service calls, multiple parts replaced, and after dumping hundreds of dollars into repairs and service calls (even called Whirlpool and asked for some help with parts cost but was given the cold shoulder and was told, We cant help you), we are dumping these machines where they belong - scrap heap. I will never purchase another Whirlpool product and will tell anyone who will listen what garbage Whirlpool manufacturers are and absolutely pathetic excuse for customer service and the poorest of quality product. Whirlpool will never be in my familys home again and will never see another cent of my monies.

Whirlpool Cabrio washer and dryer set bought 5/25/2012 - The washing machine started beeping during the drain cycle and I have to reset it. After messing with it for around 30 minutes I can finally get it to drain. Then last night the dyer started making a loud squeal. I called and it is not under warranty anymore, so I have to flip the bill. My last $75.00 set from a church sale lasted 15 years. I paid $1,331 and this is the worst piece of crap I have ever bought. Lowes will not fix the problem when there is 1000s of complaints. I would have never paid this much, if I knew it wasnt going to last!UPDATED ON 05/15/2015: Whirlpool sent out Appliance Hospital to diagnose the problems. The washing machine needs a new tub, seals, circuit boards, drain motor etc and the dryer needs everything + an idler pulley because the original one disintegrated. The part they want me to buy is the same one that already failed. The cost to fix it, is over the amount I paid. REALLY? Somebody needs to do something to help the consumers. Blogging doesnt seem to help. I am handicapped and I have to go to the laundry mat now because I cant afford another set. DONT BUY WHIRLPOOL.

The washer has a convenient water level feature which enables conservation. The dryer also feature multiple heat/timing features, another conservation plus. Both are compact and easily loaded and unloaded. The multiple alerts at the ending of the dryer cycles are a convenience.

Cabrio he washer wtw6400sw2 - I bought this washer about 6 years ago at the time we paid around $900. Now my bearings went bad and the repair person told me it would cost around $300 to $400 to replace the bearings and seal and shaft but that I should call Whirlpool and see if they could replace the part or give me some discount cause it is becoming an issue with all the Cabrio washers. So I called and spoke with a so called manager - as far as I know it could of been a cleaning person there. She told me that she could not do nothing about the issue. So if a lawyer would be nice to help me and the rest of the world that are having all these issues to file a suit against Whirlpool Corp.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I have purchased Whirlpool washing machine from A.K. Gandhi, Nagpur Vide. Invoice no. ** (JAYANT **-PURCHASER). Item detail - (LLP2187) WPL W/M STAINWASH DEEP CLEAN 65-GREY 10YMW 3110601162712159, Nagpur on 5th Sept 2016, since two days it was making noise, so I called service centre on 22nd Oct 2018 and he attended same, accordingly him gearbox has problem and needs to replace for which expenses would be around Rs. 6000. Its very surprised how can machine develop such big problems within two years of use. I have paid him Rs. 350 as service charge. Serviceman mobile no. **. You are requested to do needful and arrange to replace faulty part within early period as fault lies with company. How can company supply such machine, which develops problem within two years. This machine is in extended warranty period.

I purchased a Whirlpool Cabrio washer in July of 2013. In the first 6 months had a technician in to repair it. Worked fine up until now. The washer fills up, the clothes just soaks there for awhile (doesnt wash) then drains out. It doesnt fully drain so I have to put it on spin and drain again. Any suggestions on what I should do?

I replaced a 4 year old Whirlpool dishwasher with a new Whirlpool dishwasher on 01/18/2019. July 2020, dishwasher failed. Finally got Whirlpool to send out a repair technician and was advised that the sump and motor had failed. This is after only a year and a half. Whirlpool will not back their product because I did not send another $200 for a service plan. So basically whirlpool cant even guarantee that their product will even last a year.My 4 year old dishwasher had the same issue which is still unacceptable. I have a Whirlpool refrigerator that almost burned down my house and just replaced a failed Whirlpool stove with a Samsung. I wish I could say what I am replacing this dishwasher with, but I am too frustrated to even look for a replacement after only a year and a half. Replacement parts will cost $250 just for me to do it myself. Do yourself a favor and research the product. Should you spend more? I cant answer that. I have seen 20+ year old Frigidaire dishwashers still working. I honestly dont know what brand to get, but I do know that I will never purchase another Whirlpool product again, and neither should you.

As long as Whirlpool continues to use JB Hunt for delivery and installation service of their products, I would stay away from ordering. JB Hunt visited my home 3 times, and each time left with the dishwasher as they arrived without the appropriate tools to perform a basic installation. Whirlpool also sent 2 damaged dishwashers that could not be installed. Buyer beware.

I have Whirlpool 40 gallon heater 5 years ago. The pilot light went out and I replaced the parts. This has happened three times and I have replaced the entire thermocouple assembly three times. The last time, the parts came straight from Whirlpool. This time, the pilot light will not stay lit. I am on my way to buy another hot water heater for my family because I have had enough.

We will never, I repeat, never buy another Whirlpool, Kitchen Aid or Maytag (other than the Maytag dishwasher) product again. After just two years on the Cabrio washing machine, the bearing on the wash tub began to go out. As it was out of warranty, the cost to fix was greater than just buying a new machine. This was a known problem and Whirlpool failed to remedy the problem. Based on this experience, we went with an LG as a replacement. Before you buy anything, research it.

We bought a Cabrio washing machine two years ago. I have had to have a repairman out twice for it shooting water out of the top (from a top-loading machine). They repaired that and its better. But this goes off balance ALL the time. I cant even wash a load of towels without it going off balance. We bought this one as it was supposed to handle large blankets and even my lightweight king size comforters. Yeah. Did once or twice, then started the off-balance stuff. It grows MOLD in the bleach, softener, and detergent dispensers.I wrote to the company and included pictures. They were really rude about it. I finally found how to remove the dispensers to clean them, but it is very difficult. I HATE this machine and will never buy a Whirlpool again. (Our refrigerator, which was in our house when we bought it, is also a Whirlpool. It is poorly designed and collect dust in the coils UNDER the thing and you cannot reach them to clean it. Coils are behind other pieces that block being able to clean them.) Whirlpool is a horrible company and doesnt stand behind their products, in my experience.

I purchased a fridge from them a little over a year ago. First and LAST EVER. The freezer door started to sag and when I called them I was told my warranty expired a month ago. Had a Whirlpool service person look at it and told me that the cost is $110 plus $45. I said that is fine. They scheduled another appointment but I received a call 12 minutes before the time expired (as you know they say in the afternoon and no exact time and they said between 2 and 4:30) and the guy asked me what is wrong with the fridge. I told him that someone took a look at it a week prior but I had to go through the whole thing. Then he said that they dont have the part and I have to wait for a week. This was a Saturday before Xmas and waited all afternoon to be told that was very upsetting. Any how I called customer service and spoke with a Michelle. She said she is going to try and find out if she can waive the additional service fee, arrange the time and will comp the parts (around $15). After 45 minutes on the phone I had to jump off for a business call so Michelle said she will email me and I gave her my email.Few hours passed and no email. When I called back the idiot that answered the phone kept saying that the warranty is out and I need to call another number so I asked for a supervisor. I was on hold for 11 minutes then I was hung up on. I called again and asked for a supervisor. Spoke with Benjamin (Opt# **), he said that Michelle notes did not state anything about help in possibly waiving anything and that I refused the parts. I was furious. What a LIE. Long story short he said they cant waive anything and I should call the scheduling number for any help. I asked to speak to Michelle and guess what the answer was... SHE IS BUSY. What the hell. The service is well below zero as well as the quality of the product. I am going to send a letter to the office of President (Jeff Fettig) Whirlpool Corp. 2000 North M-63, Benton Harbor, Michigan 49022-2692. It is so sad when corporation are so big that little people who buy their products dont mean much to them.

After 3 short years, my dryer that cost me over $900 is not working and the part needed for the repair is no longer being manufactured. They did offer the parts for free, but that was useless since they arent available. They then offered me a new dryer which would cost me $800. I am currently waiting for the Product Exchange Team to contact me. Im not hopeful that will be of any use.

I purchased this washing machine December 16, 2011. I paid $737.07 for this machine. 14 months later I had to repair the top of it which cost me $255 for the lid which the plastic around the lid was cracked. I had to pay $136 installation fee and two years later the exact same thing happened again, the plastic cracked. I have contacted Whirlpool which took a complaint - said that was all they could do. Ive contacted the store where I purchased it, they can do nothing. I read online there are many complaints about the lid on this washing machine. It shouldve been a recall. I will never purchase a Whirlpool product again. I will not pay to have it repaired again. I will give it away and purchase something else not whirlpool and not from Lowes. I expected some kind of compensation from whirlpool on this. I have all my receipts.

I always appreciated Whirlpool’s quality, but this brand new stove in my brand new home is a disappointment. The top, back (control panel) gets extremely hot when the oven is in use. The burners are not as easy to regulate, and the broiler (which is under the stove, a negative for me) didn’t come with a broiler pan. That was an additional cost. I had service out in the first 60 days because the oven wasn’t heating properly.

This is truly a piece of junk! My water heater is 2 1/2 years old and the pilot light will not stay on. Was told that I needed a thermal coupler and paid $30 for shipping. Installed it and still the pilot light will not stay on. Was told again that I needed to replace the main control. Another $30 for shipping. Had that installed and the pilot light stayed on but no hot water. The light was blinking 4x (temperature too hot). WHAT!!? ALL I GOT WAS COLD WATER! Now I was told I need to replace the temperature sensor and they wanted another $30! I told them to I was going to junk it and buy a different brand.

Purchased a Whirlpool Cabrio Washer 5 years ago because our other washer died after coming home from vacation. Its just 2 people in this household so I dont do mountains of laundry. The other machine lasted 15 years so go figure. We purchased the Cabrio from Lowes. Got the extended warranty but as it goes the machine fails when all warranties expires. Over the last couple of weeks this machine started to not complete a wash cycle. All lights go off except for spin light and machine stops. Even asked the person in charge of washers and dryers at Lowes about this who then told me to get an extension cord and plug it into a different outlet. Seriously! I have had to unplug the machine after it fails to complete cycle, wait 5 minutes or so, plug it back in, select rinse and spin, it fails again 13 minutes left in cycle, unplug again, plug it back in, select drain and spin, wait for it to MAYBE complete that cycle. Do not purchase this type of machine. Just for a technician to come look at it is $100 or more and to replace whatever circuit board is probably another $300 or more. Screw that! Going to find a good old fashion one if possible. Piece of junk. Not going to spend $700 or $1000 just to wash clothes for 2 people.

I purchased my Whirlpool side by side refrigerator approximately 6 months ago. Immediately upon delivery the compressor showed itself to be very noisy, especially upon start up. I questioned the delivery persons and was told it would become quieter with time. It did I not. In fact, in the following days it got worse. I contacted Whirlpool and was sent an “approved” repairman. The confusions and scheduling difficulties in this process, however, were many. Finally, when the man did arrive. He listened and said the refrigerator was working but agreed it was loud but apologized there was nothing he could do.I called Whirlpool again several times to note the noise and constantly was given the sympathy of people saying they “understood but there was nothing they could do.” Finally, out of desperation I contacted the store where I had purchased the refrigerator and they sent a manager who agreed the unit was unreasonably loud and took the refrigerator back. I researched the Whirlpool company and found they are essentially the same company that makes several other common American name brands, so I made a point not to purchase from any of these companies. Instead, I purchased from a foreign manufacturer and couldn’t be happier. All I can say is I tried to buy American but have been greatly disappointed by both the product and lack of customer service by Whirlpool. I will not buy from them or their other companies again.

This is a good looking, inexpensive stove/oven. Stove top has four burners. I liked the split grates on the stove top. Its easier to remove and clean. I do not like the rubber seal on the oven door. I am used to the heavier duty seals on most oven doors.

We have these appliances in our apartment. Its a gas range with a microwave over the hood. We did have the microwave replace a year ago, we have been here for 5.5 years. Its a good stove, we would consider buying one for ourselves.

Purchased a Whirlpool dishwasher less than 3 years ago. Absolutely horrible! The LEDs stopped working on the control panel within the second year. A few months after that the heating element stopped working. Replacing the element and thermostat did not help. The warranty only last for a year, and now I know why. Whirlpool does not stand behind their products and they were completely unwilling to help, and were quite rude honestly. I will never buy a Whirlpool product again!

How would you like to be without a refrigerator for 10+ days? How do you justify 10 days without a service tech being available for what I call an emergency! Either you need to hire more technicians or make BETTER products. My suggestion is have a supervisor go out to a call first and access the problem. My case, a tech shows up after waiting 10 days, to tell me my refrigerator needs all the parts. Which means Ill have to wait probably another 2-3 weeks for the parts to arrive. Im sure the parts werent ordered to be expedited. Im beyond furious. We lost everything in our freezer. Doesnt stay frozen in coolers.When we purchased the refrigerator, just under two years ago, the service tech was out three separate times because our ice maker kept going on the blink. Finally, I purchased ice maker, because your refrigerator only makes ice when it wants. Not reliable! Second problem, the lights in refrigerator & freezer went out. Real smart to install LED lights that can only be replaced by a technician. Insane for the consumer. (Cost of lights replaced w/o warranty contract is $100). DONT BUY WHIRLPOOL PRODUCTS UNLESS YOU ENJOY MISERY!!Why would you put glossy black finish on front of refrigerator, and the sides have black texture, where you cant see fingerprints. Has to be cleaned daily! Hope you can rectify the problem before two more weeks pass. Model: WRS322FDAB. SERIAL#: HR72710418. Not a fan of your lemon of refrigerator. You can also view this on your customer reviews WHIRLPOOL.

I bought an electric hot water tank from Lowe’s less than 3 months. No hot water so I called Whirlpool. They give me service dept over 150 miles away. They will not come. I need hot water and need help. The hot water tank is half way in the attic and half in the closet.

Reading the reviews on this I figured I would chime in. Same problem with the top rack, its unfathomable how cheap this was constructed, since I have had old school dishwashers 15 years old without even close to a similar problem. Bought in 2012/2013 and have had this problem on and off the entire time. Looking at a new one definitely not a Whirlpool!

WTW5640X The machine is tearing up clothes of many including mine. I gave them the benefit of the doubt and thought I had over-loaded the machine. Not so. There has been nothing run through the machine other than clothes and bedding. When I called for service 1 1/2 months after warranty is out of date I am told I can have a service call including parts and labor and another year warranty for almost $400. If it werent for the numerous reports online of the machine doing the same to others I might have gone for it. Shame on you Whirlpool. Are you the next GM?

I call them. Lowe's gave me #. Spoke to man there at CS. He took care of me. I was a Lowe's within 30 mins. Gave them PO. Home within 45 mins. Whirlpool you the best in Johnson city TN. You're just like Lowe's. I pay for Whirlpool because you make it. Thanks for all you do. The best. #1.

If I fix this washer I will have been on 3 motherboards in the 5 years I have owned this machine. That is inexcusable and indicative of crap quality control and manufacturing process. I should not have to replace the control board at these intervals or, within 5 years, at all. I will never touch another Whirlpool appliance again.

Whirlpool has been a trusted name for us for many years. The large tub has cut my wash load in half. Large towels to delicates have never been a problem. My washer is going on 12 yrs old and runs like a champ.

Bought Whirlpool electric range in Dec. 2005..expensive..so the warranty expired a few months ago. The electronic keypad that controls the oven and lights doesnt work. The repairs will be $408 plus tax which is obscene, and are guaranteed only for 90 days.This after only 5 years of minimal use...just me using it.I will never buy whirlpool again.

I thought the Calypso had issues until I got the Cabrio. It does not use enough water to get the clothes clean, it leaves them in a tangled mess, and no matter how carefully I load the clothes it is always off-balance making enough noise to wake the dead!

Our new fridge, which was already an exchange from another unit that went bad, kept freezing things in fridge compartment. A tech was sent out three times and then the compartment quit working completely. They stated they would replace for us, only way they would replace was to have them ship a new unit which would take two weeks. So we are without a refrigerator for two weeks. Asked if I could go buy one and be reimbursed. I could but I would NOT be reimbursed for full amount. The company reps I spoke to could have cared less about our situation especially Fred who supposedly is a supervisor. Do yourself a favor...DON’T buy Whirlpool. Their customer service sucks!!!

My model - GB9FHDXWD06 - is one of only a very few that fits our space. However, it has failed three times in 5 years: 1) A faulty defrost drain tube that was replaced under warranty, 2) A jammed vent flap that caused the freezer to fail, and 3) a burned-out control panel (an expensive repair). It is also annoyingly noisy and middling at energy efficiency. The coils are in a very narrow space below the refrigerator, which makes them a bear to clean. And, the plastic front plate that must be removed for cleaning breaks far too easily.On the good side, it is a bottom freezer model (which is far better for convenience), the space-wasting ice maker was very easy to remove, the glass shelves, removable baskets, and drawers are easy to clean, and the auto-defrost works very well (after the recall update, number one, above). Temperature uniformity is good and the freezer maintains below 0° very well. Overall, it is a good looking appliance with mediocre efficiency and poor reliability. Not recommended.

My contractor purchased a Whirlpool NU50T61-403 water heater at Lowes. After several months the gas valve stopped working. Whirlpool sent a replacement gas valve which stopped working after a month. When I complained they offered to send another replacement, which I declined. They also offered to have it repaired by 2 firms which were very poorly rated on Yelp. Whirlpool stubbornly refused any other remedy. As I needed to resolve this right away because tenants were depending on having hot water. I replaced it with another hot water heater. In summary I wasted $570 for 9 months of use.

Our Whirlpool refrigerator, model MODGI5FSAXVYO, began leaking water from the freezer onto the floor about 3 months ago. We purchased the unit in January 2011. We had to keep a towel on the floor to absorb the moisture. Our troubles began after the freezer door was left ajar and the interior became quite frosty. We had turned off the freezer several times to defrost but nothing helped until this morning when I read the comments of Marea of McClellanville, SC and Ruth of Vavenby, BC.I then decided to begin exploring taking apart everything until I reached the freezer unit in the back of the freezer. I discovered a lot of ice with the ice blocking the drain hole which is supposed to drain condensation from the freezer fins to a drain pan in back of the freezer. Apparently, leaving the freezer door ajar caused the drain hole and surrounding area to ice up. Condensation from the fins would keep dripping until it overflowed onto the bottom of the freezer until it filled up with ice. The water then had nowhere to go but out of the freezer onto the floor. The simple solution to this problem is to turn off the fridge, empty out the freezer and allow the frozen drain hole to thaw out. You can easily remove the back panel of the refrigerator to see if water is then draining into the drain pain. Good Luck! Ed

I am thoroughly disgusted with Whirlpool. How dare they sell the garbage that they put out? I didnt buy the extended warranty when I bought my Whirlpool washer and dryer. Why should I when I put out all the money that I did? I havent had the product three years and had to have a repairman out to fix. And then the parts are so expensive, and they are cheap Chinese junk. I dont understand how something with a name like Whirlpool can put out such a disappointing product. Never again will I purchase your product. And I certainly will spread the word. Greed comes to mind for me. I see you have contributed much money to campaign (Republican). Have you ever thought about what you do to yourself? How absolutely disgusting you are.

I have a two-year-old top of the line Whirlpool Duet Steam washer. Cleaning performance is adequate at best, but my biggest complaint is about the visible mold buildup that collects on the water dispensing plate as well as on the detergent, bleach and softener dispenser and rubber lining of the washer opening. I have cleaned the removable detergent dispenser weekly since purchasing. The water dispensing plate has a continuous buildup of thick black mold that can only be removed with a tooth brush and bleach and only a small portion of those openings are reachable. I have cleaned the machine with Affresh as recommended and exactly as the manufacturer recommends. Nothing changes! I contacted Whirlpool and was told this was normal for all washers in which some moisture always remains and that I should continue to clean and leave the door and dispenser drawer open to allow the areas to air dry. So, I have done all of those things for the past year and nothing has changed! I received notification that a class action suit had been filed against Whirlpool for this mold issue but have not been contacted in any other way. Not only is this mold visibly disgusting but certainly is worrisome from a health perspective. When I contacted the company a second time, I was told there was nothing that could be done and it was in no way a design flaw on the part of Whirlpool.

The refrigerator has excellent quality, low noise level, clean lines and enough room for produce and frozen foods. Would recommend this to friends. This replaces a Whirlpool refrigerator that was over 30 years old. The original unit still works extremely well and we gave it to a family that needed a refrigerator and they were very happy to receive it. It looked as new as the day I purchased it 30 years ago.

Whirlpool g2 convect/micro over the stove oven - This top of the line oven is JUNK, KEEP YOUR MONEY-DO NOT BUY THIS JUNK! I have had problem after problem. Starting after only three months. Defected door switch, touch screen, flashing screen, error message. The service repairman and I are on first name bases. Thank goodness for the, out of my pocket warranty which I no longer plan to keep. I NEED A OVEN AND DEFINITELY NOT A WHIRLPOOL.

We called to have refrigerator repaired. We had to wait for 6 weeks get repair people to come. They looked, made guess, left, no repair. Said someone else would have to do it. No date/time frame. Houlka appliance, is that the only repair place in ms? No happy/hate lowes appliances, not impressed with whirlpool warranty system. And yes I have all the original receipts for the warranty.

Our 2005 whirlpool duet washer steel drum and plastic tub broke. My husband diagnosed the problem and opted to fix it to save money. The parts are under warranty but you still pay labor and technician visit running up to $250-$300. The plastic tub was obtained only if we paid for it $100 and the steel drum they sent under warranty. The plastic tub has a hole with a black plug and sensor in it. There is a discrepancy in the measurement of the old tub and new tubs hole that is slightly larger, therefore when installed a steady stream of water leaks out. I now have 3 plastic tubs as that was their solution, to send more of the same that did not measure correctly. An investigation was done to determine they were the correct parts. As asked we had a whirlpool technician come to verify parts were correct and being installed correctly and the parts sent would not fix the machine due to the hole discrepancy. Many calls were made to whirlpool and they continue to give me the runaround. They now are not taking their technicians information. The technician has given the information to 3 sales reps in the new england area and made several phone calls to whirlpool and no one is willing to give us a solution.

Not working at all and only 3 years old. Completely non-functional. No fridge or freezer. Lost all my food. Garbage. DO NOT BUY.

I purchased the Whirlpool touchscreen gas convection range and I do not recommend this product at all. The oven cannot operate without using the touchscreen to set the temperature and it has a mind of its own. Woke up in the middle of the night and the oven turned itself on to 550 broil. I called Whirlpool, they sent a tech out who replaced the touchscreen and the same problem is happening. Not engineered very well. The range would have been fine without the touchscreen, if only it had an old fashioned knob to set the temp. I do not recommend buying this appliance.

My Cabrio washing machine is 3 years old, and is working the way it has been designed to work. It does not clean clothes and it consistently has a foul odor. Due to the odor, I must use the cleaning cycle with Affresh (pricey product) 3-4 times weekly. Even that is insufficient. Because it is in an indoor laundry area, the odor permeates the hallway and nearby bedrooms. The extra cleaning cycles are contrary to the energy efficiency of the washer, and detrimental to the severe drought conditions in California. When I contacted Whirlpool about my situation, they recommended I substitute bleach for the Affresh to keep the cost down.

I would like someone to explain to me why the control panel I.e. brains of the dishwasher which is around water is so sensitive to WATER. My daughter is the owner of the house and purchased this dishwasher last summer (2016) and within weeks we were having issue with the sensors. This supposedly was not covered under warranty (it was a WATER ISSUE). So now a dishwasher which cost over 700.00 is a door stop!! Where is people’s common sense... yes Im over 60 years old and very frustrated with the money that was spent for such an inferior product. Imagine having a dishwasher sensitive to water. The people who made it should give their heads a shake. Frustrated grandmother.

As with other posts here, the rear bearing is going out of Whirlpool Duet front loading washer. I purchased mine in late 2008. Moderate use always according to recommendations. I called Whirlpool and same story--no recall and it would be expensive to have it repaired. I cant see putting $400 to $500 in parts even if I repair it myself. I cant believe that with such a common problem, Whirlpool wouldnt either honor a repair or offer a reasonable bearing package to fix. It requires the entire back, half of a new drum. Poor design, but whats worse is no effort by Whirlpool to rectify the situation.

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

We bought this combo at Lowes and was looking forward to their arrival. Unfortunately, we have had so many problems with both appliances. The washer is constantly having an error and we can only wash clothes on the quick wash cycle or else it will shake like crazy, get an error, and stop. We had the washer a little over a year when we had someone come look at it. We were told there is something wrong with the load sensor and it was going to be $350 to fix it. As for the dryer it will dry for a little bit and completely stop (no error) and restart later on by itself. I have been a devoted Whirlpool customer but not after this. I thought it was only us having these problems but obviously not. They have discontinued this set. No recall... ridiculous.

Have an old Estate by Whirlpool, still going, no problems, washes well. I can control the wash by adding more water, stopping it and restarting it. There is nothing like the old washing machines. I have seen and used the latest and greatest, but they cannot compete.

My brand new top-loading, high efficiency washer has squealed like a banshee from day one. Whirlpool replaced the main agitator part, with no success. It still squeals so loud, you cant have a conversation in the same room. Now, Whirlpool says that it is normal. No, it is not normal for a washer to squeal so loud. I am still waiting on Whirlpool to replace the same part they replaced the last time. We are still not abe to hear each other over the squeal of our new Whirlpool washer. This is not normal.

Whirlpool WFE720H0AS0 - I tried to use the self cleaning oven feature and it cleaned the bottom of the stove but did nothing for the sides, back and door of stove. The top of the stove is impossible to keep clean. Maintaining this appliance is a full-time job. Very bad choice.

FRUSTRATION!!! It is unbelievable that even appliances have become DISPOSABLE! Where are the days of when our parents bought well made appliances that LASTED 20 years with NO problems??? There was satisfaction knowing that a purchase of an appliance was $$ well spent! These days it costs MORE to replace parts than IF you purchased a brand new machine! We purchased BRAND NEW Whirlpool Duet Sport Washer AND dryer in 2007. The washer has been repaired a total of 5 times and the dryer 3 times!!! IN A SPAN OF 10 YEARS! Are you serious?! With the $$ spent on warranties/ labor/ parts: WE could have purchased new appliances. What is WRONG with this picture? IT IS ALL about making money on REPLACING PARTS/WARRANTIES/LABOR!!! Forget the consumer that is spending THEIR hard earned money to buy the appliances initially. Short of going to a laundromat, the consumer needs to purchase a washer & dryer. So I guess it is a vicious cycle of REPAIRS/REPAIRS AND MORE REPAIRS!!!

I bought a Whirlpool water heater from Lowes. I had trouble with it from day 1. It never worked correctly. Their service department is terrible. All they want to do is sell you extended coverage policies on it. Every time I have it fixed, its never covered, and I have to pay again. You will be sorry if you buy a Whirlpool water heater.

I like the fridge raider. It works great, I have had no problems. It has good space in the fridge raider part, but very small freezer. It’s a freezer onto fridge raider on the bottom. I would like more space in the freezer area. I would buy another Whirlpool.

My new Whirlpool refrigerator has accumulated ice on the top of the freezer compartment from day 1. I called Whirlpool and a repair was scheduled five weeks later September 12. The repair person said he needed a part and would order a new light switch and ice door parts from Whirlpool. Ten days later he came back with a new switch and instructions to file some plastic off the ice door part so it will close properly. It only partially worked; ice stopped forming in the ice chute but still formed on the top around the light switch. The new switch is not flush with the liner and the plastic liner has a small crack starting at the switch. How Whirlpool wants to cut out a six inch square of the liner including the switch and glue in a patch. This patch would only be warrantied for the balance of my one year warranty. I find this unacceptable and will complain to the store where I purchased the refrigerator.

We purchased this Gold Series Whirlpool Dishwasher about 4 years ago. It worked very well up until April of this year. At that time, the main pump stopped working and it has to be replaced. There are just two of us in the household so the dishwasher was only used 2 or 3 times a week. We also kept it very clean with no build up. The gasket around the soap dispenser came out and one of the wheels fell off of the bottom rack. We just feel that 3 1/2 years is too soon for a major appliance to stop working and fall apart, especially given the light usage.

Please do yourself a favor and stay away from both Whirlpool and this unit. I purchased it from a local dealership and paid $881.00 which included tax and delivery cost. In less than 2 years, it broke. Whirlpool does not offer a warranty on the unit. After having a Whirlpool repair person come out for a cost of $75.00, I was informed that the parts to replace would cost $800.00 not counting additional labor cost which was TBD. I contacted Whirlpool and went from Agent (Phylicia) to supervisor (Ashley) to Manager (Carol **). The best offer I was given was to buy the parts at a discount of $400.00 which did not include tax, delivery or labor. So it would have run approx. $550.00 to over $600.00 to fix a $771.00 washer.My next letter is to Jeff Fettig (553 Benson Rd, Benton Harbor, MI 49022/ CIO of Whirlpool) to let him know how impressed I am with his product and customer service support. The next Whirlpool item I buy will be never. Take this as a word of warning to go Maytag or any other vendor because Whirlpool will not support you once the sale has been completed. Good Luck.

We purchased 6 six appliances for our home just over one year ago. The initial problem with the washing machine literally took ten home visit to resolve with the final solution being total replacement. Far too many days away from work. The laundry appliances have a loud beeping noise that goes off with the slightest contact, annoying and designed to be eliminated or muted. Today we discovered that the water filter in the fridge is single sourced at over $50 with shipping, which seems usurious at best. Will look elsewhere for the next house/purchase and NEVER buy from this company, including their other brands...Kitchenaid, Maytag, etc.

Whirlpool Refrigerator Freezer WRF560SEYB01. Purchased the Whirlpool Refrigerator Freezer in 2012 at Sears. Ran okay for 2 years. Bottom freezer door came off the track. Called Sears. Sent out repairman for $200 to replace the door. He did not check the ice buildup on back of freezer. Next problem, severe ice buildup, loud noise. Used hair dryer to melt ice and took the blower fan out of freezer. Solid ice on all the blowing fans and found a chunk of solid ice. Freezer no longer made the noise until the ice built up again. Now, it continues to build up and we have to use the hair dryer every two weeks. A refrigerator should last at least 10 years. This model doesnt even warrant a rating of any kind.

We bought this refrigerator because it was the only panel ready one we could find. When it was delivered the two doors did not line up. There was an adjustment that could be made but it required that Whirlpool had to do it. We made an appointment and was told it would cost $179 for the adjustment!! This for a refrigerator we had just purchased for several thousand dollars. The service person showed up and after working on the refrigerator he could not balance the doors. He blamed it on uneven floor, misaligned cabinets – anything he could say to shift the blame from Whirlpool. We called and complained again. They sent out another service person. He was just as useless as the first one. Told us to even out the doors we would need to shim the refrigerator which he would not do. Complained to Whirlpool with no results. Finally hired someone not affiliated with Whirlpool who was able to get the doors to be aligned. Never Never buy a Whirlpool/Kitchen Aid Appliance. They do not stand behind their products and do not care about their customers!!

I purchased my Whirlpool Cabrio H2Low from Sears 6 years ago. After numerous problems with clothes not getting clean (soap spots, stain transfers, etc) I learned the only setting I could use that actually cleaned was bulky with an extra rinse (so much for the energy efficiency). My first major repair was in the first year. Weve since had 3 more and the darn thing died again this morning. First the motherboard died and needed replacement, the drain pump failed, the door lock failed, and twice now it stopped spinning. At first I thought maybe I was just unlucky and bought a defective machine but repair sites are filled with reports of similar problems with these machines. I will never buy another Whirlpool product again.

Microwave did not last one year and magnetometer blew up. Customer service would not honor request to help with purchase. Repair call was more than a new microwave. In essence, I would not purchase this manufacturers appliances.

On April 10, I bought a Whirlpool washing machine with a sensor. My clothes do not come clean. The dirty spots are still visible. I had three technicians come to check it out and after they just made the machine start, make the water run, and make the water empty, they confirmed that it was working normally. I have insisted on having someone come and just do a small wash and they did not agree because they are not there to wash clothes. I went back to Leon’s where I bought it and the saleslady told me that she could not do anything about it. I have been dealing with the customer service and the person has tried three times to get someone to come and check the washer properly and was insisting in front of me that I wasnt at all satisfied with the performance of the washer and still confirmed that the washer was working fine. They keep saying that there are no parts that need to be fixed or exchanged, so that means there is nothing wrong with the washer. I have tried all different kind of soaps. They were suggesting that I use Tide, which was the best performing soap. I used Tide or Purex - I even tried half a bottle of bleach - and it would not clean my clothes. The problem is the clothes are not turning, they just hardly moved with water that just keeps the clothes humid. I tried putting in more water with a bucket and when I push the start button, it would drain out all the water that it did not put itself. Ive called the consumer protection and they have advised me to take legal actions against the company and the store that sold it to me. They confirmed that whatever we buy, the article has to do the work it was made for; so the performance of a washing machine is to wash clothes. I even took a three-year prolonged warranty and the store told me that once the one-year warranty with the company has expired, then they could help me with sending their technicians and see what the problem was and they would take it from there. I have an account with the store and I have eighteen months to pay it off. So I was wondering if the saleslady did sell me an appliance saying that it was very good and that I should not have any problems with it. Can I take steps going against her for false advertisement? It’s a month now that my clothes are not washed properly and I need to rewash them by hand before putting them out to dry. The consumer protection office has been telling me that the store should be the one to finalize the problem with the company, but it seems that not even they can come to an agreement. Whatever steps I will take against the company and the store, what are my chances of getting my washer replaced? Whirlpool has been advised about me taking them to court and I got permission to do so. Actually, they invited me to go ahead and do what I thought was right. I do not have the money or time to waste on something that maybe I will have no chance to get anywhere. All I want is to have it replaced with another washer that would be more performing. If anyone has had the same problem and had their case solved, maybe it will give me hope to go on. Please, what is the best and fastest way for me to get this problem resolved? I do need a washing machine. I do need to wear clean clothes. Thank you for your patience and understanding.

Whirlpool is one of the best appliances I have ever used. They last for years and the self clean ovens come in handy. I’m not to big on the electric stoves, but they are also amazing. Almost everyone in my family use Whirlpool, and we all love the stove and refrigerator. It is definitely a wonderful product.

I bought a Whirlpool refrigerator about 1 1/2 years ago. Mechanically it works fine, but many places on the outside are showing small rust, circular rust spots. Looks like the refrigerator has the measles. I dont think ordinary paint will cure the problem since it looks like the rust is coming through from the inside of the door. Any ideas as to what will cure the appearance and keep the rust hidden????

Bought this model #WTW8500DC from Lowes in 2015. Ever since had problems. Stopping in the middle, not starting, recently keeps running water, lid lock issues, had multiple service calls and multiple hardware changes, paid extra for extended warranty from Whirlpool hoping that within a year all problems would be gone after so many repairs. Boys I was wrong. After spending around $1200 between this machine and the extended warranty, three year later after the warranty expired now I am stuck with this non-functional piece of junk and looking for another washing machine. Would love to hear from Whirlpool if I stumbled upon a lemon, or three year is expected life of their $1000 plus machines.

I was having trouble with our Whirlpool water heater and thought that wed have to shell out and buy a whole new one. Chris saw my complaint and helped me find the right replacement kit at a minimal cost, as my unit was out of warranty. He even took the extra step and overnighted the parts for us at no extra cost. I was extremely impressed with Chris professionalism and customer support skills.

Whirlpool Water Heater bought May 2011: Water heater not heating. I called Whirlpool and they stated the equipment is under warranty but not the labor; $137.50 for 1st hour of service. Troubleshooting is a joke. It just doesnt heat. Waiting on the 3 plumbers to call me back. They are busy. Water heater went out Sat morning and Whirlpool doesnt open until Monday. Its Monday at 5pm and Im still waiting on a call back.

My Whirlpool refrigerator/freezer stopped cooling just after a year. I had to buy a $319 warranty. It was fixed, but broke several months later. The repairman said he would try to stop the leak and it worked for a couple more months. The refrigerator was obviously irreparable and we should have had it replaced by Whirlpool at this point. Now, that it broke again (stopped cooling and freezing) the repair service is giving us the runaround. Its over a week and they wanted us to call a repair service and they would reimburse them. The repair service and Whirlwind know about this problem, but refuse to acknowledge it and are getting away with it. With all the comments Im reading here, there should definitely be a recall. Id like to know what it takes to have one authorized.

Purchased washer 8/2015. Washer quit working 12/2015. Would not drain or do anything. Repairman dispatched and came 3 business days later. (They dont work weekends.) Repairman looked at old receptacle cover and immediately stated, Problem with polarity of plug. No prior problems with plug running appliances. Plugged into it for over 8 years. When I advised him of that then he started troubleshooting circuit board. He cleaned out the machine and got it to work. (Still under warranty) 4 days from repair, and machine quits. Same problem. Wont drain and wont do anything. Call for service again on Weds. morning and given following Tues for service call. Online consumer reports complaints #ered at over 1,7000. Same machine, same problems. Call Whirlpool directly, given runaround. Talk to Whirlpool mgr. (Robert) complaint # **. He states, Have to wait for service. But calls Brandt Melb., FL to try to get sooner service. Brandt calls me stating they have ordered a lid lock and CCU board for machine and will be out Monday. How would they know to order these parts if it is not a constant issue? Im thinking class action suit for shoddy product... LOWES Indian Harbour Beach, FL. Transaction #**.

Our 27 cubic foot BLACK French Door refrigerator is freezing up again for the 4 or is it 5 time. We are now told they will give us a replacement and to go to the website and find what we want. The website lists DISCONTINUED fridges. Called their RUDE rep and found out only can get a Smaller, stainless steel ONLY refrigerator. So is that how they work, sell crappy refrigerators and then replace with a lesser refrigerator, which most likely will break down too. SHAME ON WHIRLPOOL. Or is it DEADPOOL. Your reputation is shot. We will NEVER purchase another piece of junk from you!!!

A couple years ago we purchased a Whirlpool Cabrio WTW8000 top-load, high-capacity, washing machine based upon good claims of the salesman at Lowes - Appliance Dept. This was not an inexpensive machine. However, this washing machine failed to live up to representations and performance is poor. However, biggest complaint is that clothes are able to get stuck between drum and the unique agitating device which results in holes and tears in material. This is a significant design flaw and were not sure why more people dont complain about this rather significant design flaw. Of course, there are other shortcomings... but destruction of clothes is a serious problem. While this machine is in excellent condition, it will be replaced with a more traditional washing machine with vertical agitator ASAP.

After 2.5 years seal around door melted on microwave. Whirlpool Corp sent a repairman to do a safety check. Said unit was ok to use. Plastic seal on for area totally melted about 2 inches wide. Co. Had a recall about a similar problem but our serial number was not included???? Did not want to give them any stars.

In 2007 and 2008, I purchased 7 natural gas heaters: 1 for my home and 6 for rental properties. I have had nothing but problems from all of them. Two of them failed this weekend (one 40-gallon and one 50-gallon). I called the 800 number and have to pay $63.50 for parts for the 40-gallon and was given a PO number to pick up parts for the 50-gallon at Lowes. They do not have the parts. I have spent over $250,000 at Lowes since 2000. I have all Whirlpool appliances in rentals and my own home. The discussion I had at two Lowes stores today really showed me how they take care of their customers. I told both stores that I will never buy the Whirlpool brand again!

I love my washer and dryer but am a little disappointed in a few areas. First, my washer stopped spinning normally after a few years, I forget exactly why. Then my clothes were too wet when it was done. My dryer then did not get my clothes dry in one cycle. Also, it was going to cost $500 to fix my washer which wasnt worth it. But Whirlpool did send us a new tub and all the parts for free. Thankfully my husband is handy and after finding a YouTube video, replaced it all and now it works again. My dryer still doesnt always dry everything all the way. I often have to do 2-3 cycles in the dryer to get my clothes dry. I thought there was supposed to be a sensor that would keep the dryer going until there was no more moisture. Maybe that is broken too.

Ice maker continuously freezes up & have to pour hot water into the ice maker to get the ice maker off the mounting. VERY ANNOYING, A DEFECT IN THE UNIT= NEED CLASS ACTION LAWSUIT ON THIS.

We purchased a KitchenAid KFIS29PBMS00 in August of 2013. By March of 2014 it had stopped freezing and producing ice. Sent out a technician (mind you each technician has to come twice, once to diagnose and then to repair). They determined that all of the panels and ice maker needed replaced. Did so with no resolution. Placed another call. This technician determined that the compressor was bad. Installed a new one on April 10th. The fridge worked for 30 days. Stopped freezing and producing ice. Placed the 3rd service call. Was told that the new compressor was bad. Technician showed up on June 5th to replace it but did not have one with him. He was told by Whirlpool that they had discovered a wiring problem and that if the Serial number begins with K322 -K335 yours is one of them. We are K324. He ran a serious tests and contacted Whirlpool. I was told it is not in Whirpools hands. LUCKY ME NOT. It is now June 19th, I have made 2 additional calls to KitchenAid after not hearing anything back was told that I was in the process of receiving a new fridge and that I would get a phone call. After nothing I called back again. After 47 minutes I was transferred to a Supervisor. According to her while we were on the phone, she ordered a new refrigerator. No upgrade, compensation or a care in the world for the consumer. I will NEVER purchase a Whirlpool appliance again. I expect to have to call back again.

I thank the folks at Whirlpool for building a washer (Cabrio tub bearing failure) that lasted 22 days just shy of four years, better than the Whirlpool Duet that lasted 14 months, tub bearing failure also. Now I have high confidence that Whirlpool pre-engineers failure into every washer they build.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

I have been buying Whirlpool appliances most of my married life. Our most recent washing purchase is the worst machine I ever owned. I have ruined more clothes, rugs, sheets and towels, etc. than I ever have in my 45 years of doing my own laundry. In fact, I do not EVER remember a washing machine destroying any of my articles. I just pulled 2 almost new rugs out of the washer only to find they have been destroyed! I am pretty sure it is the extremely fast spin cycle that is destroying my items. I know it cant be the agitator because it doesnt move fast enough to even clean the clothes. And the stupid load sensor is absolutely worthless! It does not dispense enough water to even cover the clothes let alone clean them. Go back to the old machines that did their job without destroying anything and actually cleaned the clothes with an amount of water that I chose. I ABSOLUTELY HATE this machine.

Our Model # WRF532SMBW refrigerator was purchased on 8/21/14. In the last several months, it has begun having problems with ice build up in the bottom of the freezer, as well as water puddling around the front legs on the floor. I called Whirlpool and they suggested it was our water line, but it does not leak onto the floor daily. They then suggested I have a serviceman come out for a $120.00 service call, plus whatever other expenses that occur. Or, I could just pay $322.00 and that would take care of the service call, parts and an additional one year warranty. We just bought this refrigerator 23 months ago and it cost $1618.92. Now I need to spend $322.00 additionally! What a rip off. Do not purchase a Whirlpool Refrigerator or any of their other appliances. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 2 years old.

Purchased the Gold Series Dishwasher Model No: WDF730PAYM0 Serial No: F14403489 on Dec 2011, started using it from Jan 2012. All is good until June 2014. It started leaking from the bottom, called Whirlpool - the great bad company. Since it is not under warranty they asked to schedule an appointment with their local authorized rip off service company. Technician come on the service day and told me that it is $120.00 for the service call and Labor and parts are extra, first of all $120.00 to come to my house is first rip off, that is the reason Whirlpool on their website do not give any estimates on the service call.After checking the appliance he said main assembly is bad and needs to replace and that will cost more than the original purchase price - what a ripoff. He asked me to contact Whirlpool, they may help since this is the known issue with this model. Called Whirlpool and mentioned and they said it is too old to continue to operate so they cannot help. Ended up trashing the 2.5 year old dishwasher for the new GE dishwasher. Never buy a Whirlpool ever again even on sale. Whirlpool company is not ethical and not ready to help consumer, would love to see them close their operation in America.

Spent the extra money to have a beautiful, slide-in oven. The AquaLift technology just seemed like another plus. After the turkey cooked, just seemed like another oven to clean. The AQUALIFT does not work, except for the bottom of the oven!! A fresh oven cleaner? Only available only. Get this beautiful range, not AQUALIFT TECHNOLOGY. CLEANING with it.