Bought the Whirlpool Cabrio in March of 2013. From the first day we used it, it Never cleaned our clothes. There is not enough water to clean the clothes. I put some grape jelly on one towel and washed 5 more towels with it, and guess what the stain and jelly are still on the towel. l went over to my daughters and washed the same towels on rinse, and the jelly was gone. Remember, it was on rinse. I THINK the CEO NEEDS to come to my house and wash his white shirts. This is a design problem. Yes, it will save you money, you dont need soap, because the washer doesnt clean your clothes with water or soap. SO, l would like to send the head CEO, this washer. l would love to see how his wife likes this WHIRLPOOL CABRIO... REMEMBER ITS US THAT KEEPS YOUR COMPANY GOING.

Whirlpool front loader duet washer WF9400SW01 - I bought this washer brand new in 2007. The rubber ring by the door started to grow mold after 2 years, the washer collects water after wash. Water was dripping down to the drum and sit there. If I forget to check and drain it by turning on in the rinse cycle, it wets the entire floor. And it sounds like a freight train after 4 yrs when it spins. My last washer lasted 20 years and it was a whirlpool top loader. Thought I might get that with this one.. but NOT.

I bought top of the line stainless steel Whirlpool kitchen appliances two years ago. Warranty has expired. Microwave error message showed need to shut door and press start. Door was shut, opened and shut door 20-30 times for microwave to start. Had to buy new Microwave. Now dishwasher now will not drain. Refrigerator ice-maker dispenser is too small and ice keeps getting stuck in dispenser. I am done with Whirlpool.

Refrigerator model # wrs325fdam04 - Refrigerator shelves and drawers are made of flimsy material. Water dispensed is never cold enough - almost at room temperature. Every six months one has to change the water filter cartridge, Filter1 w10295370a, which costs at least $49.99. Cheaper versions that cost 50-60% less, I have purchased and returned 2 different brands, are not compatible with this refrigerator. I do not recommend this refrigerator.

I had the best experience when I purchased my washing machine and dryer. The personnel were professional and very pleasant. I am quite pleased with my washer and dryer. I have had a couple of minor problems but the warranty that I had on them was excellent.

We bought our Whirlpool washer and dryer set through a PX at Fort Hood, Texas. Took it home, plugged it in and... nothing. Called the service desk, and they sent a repairman right away. He replaced the panel and the water intake fuse (I think? It was a fuse that dealt with the water filling) and then we were off and running. I thought, Great! Now I can wash laundry! After about a couple months, the washer would be so stinking loud in the spin cycle, we would plan outside activities ha ha. Fast forward 2 years, the loud sound continues, but Ive not had any problems. Then, Im washing a load of bed sheets, and just happen to walk past the washer while its spinning... I smelled something HOT and BURNING! Sure enough, it was the washer! I hurried and stopped the spin and unplugged the machine. Opened the door to pull out my sheets, and white smoke comes pouring out of the machine. IT NEARLY STARTED A HOUSE FIRE. I was praising God I smelled the problem. Who knows what would have happened. So I call an appliance shop I trust. They send out a guy who tells me I might as well purchase a new machine because the bearing is bad, and the repair is going to cost $600+. Never again, Whirlpool. Never again. You dont endanger my familys safety in exchange for a quick buck on cheap parts. Ridiculous. And, now that I am reading all these reviews on this website about my washer, I am floored. How is there not a class action lawsuit against this company? Mold and fire-hazards are serious infractions, in my opinion.

I purchased a whirlpool duet washer & dryer several years ago. In the 3rd yr or so, the dryer kept shutting off with beeps prior to clothes dried or cycle completion. Whirlpool gave me an option for an extended warranty given that the orig one had long ended. I purchased it - a one year warranty. In that year I have had technicians to my house 6-7 times to diagnose or swap parts. They eventually swapped all 3 boards on the dryer. It still shuts down before clothes are dry. Whirlpool tells me that they outsource this service and take no responsibility for either their lemon of a machine nor their lemon service company; Alliance Repair. I would like the money back for the extended warranty so that I could buy a new dryer and all I get is a runaround from both the service company and whirlpool. I will never buy whirlpool again and advise anyone out there to also not buy their machines.

My girlfriend lives in Europe and bought a Whirlpool stove and countertop burner. She was washing dishes and heard a sound like a crack and she looked around the kitchen to find out where it came from. She looked at her stove top and there was a vertical crack down the center of it. It was turned on, no one was using it but it cracked. She tried to get a replacement glass top and the store told her they were not available. I sent an email to Whirlpool to find another one and never heard back from them. I sent a second email and that was left unanswered. After this I would never buy another stove or stove top made by Whirlpool again. Knowing that KitchenAid was bought out by Whirlpool these comments dont surprise me one bit. Whirlpool is another name for poor quality and no service.

Twelve years ago we bought an LPG Whirlpool range for our new home in Rio Rancho, NM. About 5 years ago, a tenant at our home reported a gas leak and the propane company determined that the Whirlpool range was at fault. The dealer in Albuquerque repaired the leak, by replacing all the valves at a cost of $470. A week ago, after a propane fill, once again, at least one valve was found to be leaking. Apparently, Whirlpool does not know how to make a valve that holds up over time. Over a 7 year period, I paid almost double the cost of the stove, only having to replace it at 12 years. These stoves are DANGEROUS! I will not purchase another Whirlpool product for the rest of my life.

This washer never worked right. It simply mixes the clothes up with little water. A real piece of crap. See the 2000 other complaints. Time for class action suit.

Horrible customer service. No help in trouble shooting your the appliance. Whirlpool only wanted to send a service technician. Several things have gone wrong with this dishwasher that came brand new, in a brand new house. After the year warranty is up, forget about any help from whirlpool. I would hope you would not have to purchase extended warranties on any new appliance but that doesn’t seem to be the case. My dishwasher was only three years old and on its way to dishwasher heaven. I was told by a repairman that whirlpool had a problem with their motors. Whirlpool would not confirm or deny this. I felt like I was really taken.

This is the worst washer ever. I purchased this washer (Whirlpool Cabrio Washer Top load) brand new in the box thinking it was a great price and a good deal. Worst choice ever. I have been so disappointed in this product. It is very noisy which is something I have learned to live with. It doesnt even get simple stains out. I have tried every load combination and change detergents and stain remover a couple of times. Most time I have to soak stains again and again and then wash several times and most times it simply doesnt clean clothes. It leaves detergent residue on dark clothes so of course I end up washing those again as well. The towels and sheets turn into mushrooms in the bottom of washer.

Had washer since 2016. Have NEVER washed a load where there was not a problem from washer dancing to having clothes come out without water ever touching them. Would NEVER recommend Whirlpool! Tried to contact Whirlpool website to register a rating & even their website is defective - could not get through after several attempts.

My husband and I purchased a Whirlpool over the range microwave in 2005, model number MIX155XHPT-1 and serial number TR S 30 32419. At first the top vent broke then the opening side broke off. Then the whole side of the closing door broke off. Now the whole door wants to fall off. I would have never expected this from Whirlpool, but it happened.

WTW8800YWO Whirlpool Cabrio washer, 4 yrs old! Replaced!!! Its a poor quality washer -- the bearings go out. I purchased this washer and matching dryer at Lowes following a house fire. I initially thought the water saver was a good feature. Unfortunately, my clothes were not clean and were covered with lint following each wash. I have had to replace the ring inside the washer due to shifting and causing water damage to the new flooring. I soon became disappointed with my purchase, but until the noise became so loud in the spin cycle and the repair exceeded the initial costs, I kept the washer. I am another consumer who would NEVER purchase nor recommend a Whirlpool W/D. The repairman said, If you want a washer built to last, buy a Speed Queen!

Our Whirlpool 40-gallon electric hot water heater, purchased in 2008, has performed fine, until today when it flooded our basement and, of course, did not provide hot water. As the paperwork says, it has a 12-year warranty. What options do we have for repair or replacement, preferably replacement?I was unable to contact anyone on the 877-817-6750 number due to the bad weather. The model # is EE3J40RD045V, the serial # is 0742130246, and the product # is **.

The lid stopped locking just over one year after I purchased a Whirlpool Cabrio top load washer, which disabled the washer from washing. After investigating, it seems the electronic control board needs to be replaced, which will cost $400 just for the part. I have a large family, including a disabled child, and a washing machine is mandatory necessity that I cant afford to replace after only one year.

Purchased this electric range Maytag model YMES8800FZ1 in September 2017. Thought it was just like my old range with self cleaning mode. Beware! Do Not buy this or anything with this new AquaLift self clean technology. That means youre down on your hands and knées, scrubbing. It doesn’t work. Read all the reviews about this new technology. Salesman never informed us. We innocently bought the range with self cleaning, paid lots of money, for crap! Very upset. Will spread the word for all future buyers, pay attention to the self clean mode on what youre buying, cause no one will tell you. Now trying to reach Maytag, but apparently they don’t care.

I purchased this machine three years ago. It is junk. I have had two washing machines and they lasted for years and years. Never had a problem with either machine. I purchased them from Sears. When I the Cabrio, I was told it was the top of the line washer for Whirlpool. Three weeks ago it started making a noise like a plane taking off. It wouldnt spin the clothes. The repair person said that it could be three different things the parts, for which, would cost in the vicinity of $200. However, since it was making such a loud noise and water was coming out from underneath the washer, he was certain the transmission was out. He said the noise was an indicator the bearings were gone. I didnt see much point in repairing the washer if the transmission was out because it couldnt be fix.There was a couple at Lowes purchasing a machine at the same time as myself. They said they had a Cabrio also and it was only two years old. It wasnt spinning the clothes either and making a tremendously loud noise. They told us this before we mentioned that we had a Cabrio also. I will neither purchase another Whirlpool product. Junk!

I own a Whirlpool Cabrio washer, model #WTW7800XWO. The lid to the washer has completely detached for lack of a better word. It literally blew-off during the spin cycle and is hanging on by one hinge. My husband is disabled and I have had to go without using the washer for several days, waiting on a repair person not to mention the expense that will be incurred.This was a very potentially dangerous situation. My washer is barely older than one year. To add insult to injury, when I contacted the customer service department, I was told I would have to purchase and replace the lid or pay $299.00 for warranty insurance to have it covered because this is not considered a Quality Control issue.The service person has told me that both hinges and the lid will have to be ordered and replaced, leaving me without a washer for several more days. No one has been able to tell me why this happened. I fear this happening again after repair and do not feel safe with this washer. I would appreciate a response as soon as possible.

My Whirlpool Duet washer was purchased on August 2006. The first one had to be replaced as it flooded my laundry room on the first floor and the basement – not once but twice. When I was told that they would send yet another service person out to try and fix it, I told them it would be at the curb and that I was looking forward to filing a lawsuit. Then after being on hold for forever and getting the company that sold me the unit involved, they replaced the washer at no charge.From day one I hated this washer machine. If you failed to take the clothes out immediately after washing, they would get a musty type odor and I never felt the clothes got cleaned enough. Yesterday, I went to empty a load of laundry and it was soaking wet with water pooling in the bottom of the barrel. Today, I had a certified Whirlpool tech come and look at the washer and he told me to put it at the curb as the rear bearing is shot and needed to be replaced. He also told me not to buy another front loader and the cost of the repair would be approximately $800.Thank you to Whirlpool for manufacturing a true hunk of crap that, may I say, cost me $1300. I will make sure I tell everyone I know that your products are crap and I would rather wash my clothes by hand. I did call the WP customer service number and was told that this is unheard of and that these machines rarely have any problems. After just reading multiple complaints of the exact same problem, I now know that this product is inferior and the design of the bearing assembly is seriously flawed. A major recall is probably in the near future and Whirlpool is hoping that most people will just dump them before the recall is made public.

I bought the WTW4815EW0 Whirlpool washer. Worse machine ever! It’s take forever to wash a load, there’s no way it’s efficient when it takes twice as long to wash one load. It doesn’t sense the water level correctly, Its noisy, and after only having it 3 years it crashed on me. I refuse to waste money fixing the piece of junk and when I go to purchase a new one it won’t be a Whirlpool.

There is a chronic and well-known problem with recent French door, bottom freezer refrigerators sold by Whirlpool, including the the brand names KitchenAid, Jenn-Air, Maytag, and Amana. The problem is caused when the defrost drain freezes, preventing defrosted water from reaching the evaporation pan. After enough water builds up, it overflows along the front of the refrigerator. In my particular case, we have wood floors and they were ruined by the water. After doing some investigation on the internet, I have learned that this problem affected approximately 1,500 model numbers sold under these names. These model numbers are listed in a Technical Service Pointer issued by Whirlpool.In August 2013, after experiencing several years of problems with these units, Whirlpool issued a Technical Service Pointer W10632338, advising service technicians that a new P Trap drain tube kit was now available, and suggesting that the defective duck bill check valve should be replaced by this new part. The problem for years had been that the rubber duck bill check valve would, over time, become sticky (or tacky) and would then not open - causing water to build up above it. Eventually, the water would freeze and since newly defrosted water could no longer escape, it would build up and eventually overflow.From what Ive seen online, plus a conversation with the Sears technician who come out to diagnose and repair my leak, I am convinced there are many thousands of customers who have experienced this problem. Because it takes a while for the rubber check valve to become sticky and no longer open, it is not uncommon for the problem to not appear until after the standard one-year warranty has expired. From reports, Whirlpool has sometimes acknowledged the problem and effected repair of refrigerators no longer under warranty.But what about those customers, like me, who have experienced water damage to floors and cabinets? Shouldnt Whirlpool be liable for those repairs, too? Id be interested to know if anyone knows of plans for a class action lawsuit.

Most awful oven I have ever owned!! I purchased a brand new Whirlpool double oven one year ago. I was replacing a Whirlpool double oven, and all my other kitchen appliances are Whirlpool. It is model #WOD51EC0HB01. WORST DECISION EVER!!!! No more Whirlpool for me!

I purchased my Whirlpool refrigerator 8 months ago model # WRF560SEXM which is less than a year old and already Im experiencing problems already. I have owned several refrigerators in the past which were older models and less sophisticated, and all of them lasted well over 10 years with no major issues, so to buy a new refrigerator through Whirlpool and have it malfunction in less than a year is unacceptable. Customers deserves better than this especially at these prices.My malfunction occurred when my ice maker stopped working and the internal temperature stopped working altogether, which caused all my food to spoil which had to replaced which was very expensive which infuriated me more and because my service appointment was a week away. I LITERALLY had to order out for food and purchase ice. And if this happens again I will have replace food and order food out again. WHIRLPOOL dont realize the impact this has on its customers. I would definitely not recommend their refrigerators EVER!!!

Havent had any issues with it. Works great but does end up off balanced quite easily and halfway across the garage. Washes clothes like a maid. Is kinda small for bedding.

In the last two years I have purchased a new Whirlpool Duet washer and dryer with base, Whirlpool Gold refrigerator, and (less than a year) a built-in Whirlpool microwave. I have already had to replace the gaskets on the washer, which required a $65 deductible. I had to spend $65 on my service contract deductible for my dryer as they have had to order me a new motor and thermostat. My refrigerator had an appliance bulb as required installed; however, it still burns the plastic covering. I have not called on that yet. My microwave, which is less than a year old, has a small crack inside the door and part of the handle has broken off.

My mom is 82. She purchased a Whirlpool refrigerator March 2013. Since her purchase, she has had to have numerous service calls. This was covered by her first yr. warranty. After the first yr., she purchased an extended warranty from Whirlpool. June 24th, 2014, her ice maker and freezer quit. My husband made numerous calls trying to get this fixed. He was switched back and forth from Whirlpool and Assurant. Assurant said it should be under Whirlpool and Whirlpool said Assurant. My mom felt that Whirlpool should have taken care of this problem. The refrigerator was a lemon. It was a French door style with bottom drawer freezer. We finally called the local dealer, whom she purchased it from, and he took it back. Gave her substantial credit toward another refrigerator, not Whirlpool! Very disappointed in Whirlpool... Will never purchase another appliance with this name!!!

My issue is I believe that Whirlpool should pay for my tub and bearing part because the washing is only 16 months old. Because it went over the one-year warranty by four months, I shouldnt have to buy this part considering it is such a big break for such a young washer. Please advise if Whirlpool will assist me with this issue.

Im 70 years old and always bought Whirlpool washing machines. My last one I bought at Lowes and it is the most Ive ever paid for a washer and its the worst Ive ever owned! Dont waste your money! Hard to get clothes balanced and it slams and bams like the old 1970 washing machines! Horrible!!!

Got a Whirlpool hot water heater 5 years ago has 9 year warranty. The threads on the nipple are rusted out and it’s leaking. It has rusted out so badly that it’s leaking. They are refusing to replace it saying it’s a plumbing issue even though the nipples that they installed are what’s leaking.

New stainless steel range 5.3 cu.ft. with convection oven delivered by Home Depot on time. Before the day was over the trim around oven glass was falling off. Double sided sticky tape was not holding. Yes its put on using double sided sticky tape. Called Home Depot, once you accept it, you deal with Whirlpool. They must first send someone to look and see. Yes its falling apart. Service tech will order new door. Mind you it will also have the sticky tape. We have also noticed that the glass top has many deep scratches, he will replace that also. A week later still no word, when. Used the oven because I couldnt wait and as it heated up smoke poured out of it and a loud noise from inside. Turned off and pulled out bottom drawer to unplug. Bottom panel had fallen down and undersides were rusted. Only had the stove 3 weeks and its Christmas Eve. Will read reviews first next time. No problems with my other Whirlpool appliances.

Buy a new in a box dishwasher, it is not working, not a good customer services, I wait 1 week for a tech to come and fixed, and I will wait to tech to come back with parts to be fix. Company not replace the unit, I pay for something that is not working. Very frustrated for the time waste. 3 day off from work.

I bought a gas range (#WFG524SLAB0) in July 2012. Two weeks ago, the oven stopped igniting. I called Whirlpool to have it serviced and they sent out someone from A &E Service Repair, who told me an igniter had to be ordered and it would take a week to come in. (He said he will order the part.) Then he told me to call Whirlpool again and schedule another appointment. Whirlpool sent out one of their techs two days later, who told me the same thing about the oven and said a part will need to be ordered. I told him it was ordered and he looked and said no part was ordered. So this was the week of Thanksgiving. Because the part would not be in until next week, no one could fix the stove until eight days later. So my Thanksgiving was ruined, no less with not being able to cook. So the service tech came to put the part on and the oven still is not working. He pretty much told me there was nothing he could do, for me to call Whirlpool again and have someone else look at it. I called Whirlpool and actually spoke to a supervisor who basically told me the same thing I have been hearing for two weeks: “We will send a service tech to look at the problem.” Keep in mind the stove is only four frigging months old. So here I am waiting again for someone from Whirlpool to fix my oven.

It does not clean as well as I would like. I have to wash the dishes before I put them in the dishwasher. It is also much too noisy for my liking. It has the pot wash and the dish wash. It has several types of cycles, long - short and it has a drying mode. My next dishwasher will be bigger so I do not have to run it every day. My next will be stainless. This particular dishwasher is nothing special but I have my eye on one with the buttons in the top of the door so nothing is visible on the surface. My dishwasher is getting older and I will replace it soon.

This washing machine has not worked well from the time I bought it two years ago. It never fills to the amount of water required to clean clothes, it is always off balance, so I need to adjust the clothes at least five times per load. I end up wringing my load out by hand. The clothes come out smelly and not clean. After the cycle is done all the clothes smell like mildew. The other night while doing a load, it made such a loud noise in the motor and started to shake up and down, and then moved forward, like it was going to take off or explode. I tried to do another load, but after it filled and started to agitate, it started to make a loud grinding sound and there were 25 minutes left, then the timer showed 26 minutes left, like the computer in the machine is messed up. I had to empty the water out, wring out a load of clothes including towels, exhausting.The worst part is that the machine is finally paid off, I am a single mother on a disability and I am stuck with this piece of junk. I felt desperate so I looked up Cabrio washing machines to try to figure out what could be wrong, and then I find all these negative reviews, and these owners all have the same issues. Why has there not been a recall, or a class act, who can afford to replace a $700.00 washing machine every three years. I also purchased the Cabrio dryer which cost over $700.00. I do not trust that it will be any better in the long run.I cannot rate this machine as it has been a nightmare from the start. White socks seemed to come out with more dirt than when I put them in, and I am sick of using bleach all the time, the fumes make me feel ill. This is not acceptable, obviously this item is defective, and a prominent company such as Whirlpool should take the loss, not all the victims that paid too much in the first place trusting that Whirlpool was a reputable company, I will never give them my trust or business again. I hope to hear from you, and if there has been a recall or class act legal actions, please let me know as I want to be involved.

I purchased a Whirlpool 50 gallon gas hot water heater 3 years ago. I have 3 daughters all in school age. When my old one finally quit due to tank failure and out of warranty, I went to Lowes and bought a 6 year warranty hot water heater costing around $600. Now I figured you get what you pay for RIGHT! WRONG! So about 2 years ago the pilot light started to just go out on occasion, a bit of an inconvenience but there was no default code warning me of any other issues. So typically we just relight it. I called Whirlpool to get help with this issue, but they wanted me to pay for a technician to diagnose the problem. Um isnt that what the warranty is for? I said dont bother. Im not paying $150 for someone to tell me what I already know. Ill just keep relighting it myself. So finally the pilot light goes out for the 100th time but this time I go to reignite it and BOOM! It sounded like a twelve gauge shot gun going off in my face! Then it flutters flames into the chimney of the hot water heater. Scared the crap out of me at first. But it finally stopped and run fine. Well Im laying in bed a few nights later and woke up to a loud thumping noise, I go down stairs and it stops. The following day Im in the kitchen and THUMP THUMP THUMP BURP BURP BURP. Run over to the hot water heater closet and theres the flames shooting out of the gas valve into the hot water heater then BOOM! Its out! The valve unit finally took a crap I guess. I call Whirlpool again to get my warranty - this time it definitely needs to be replaced. So the guy tells me the parts are covered in the warranty but a technician needs to look at it first and the technician Ill have to pay.. Excuse me but what the ** did you just say? I have to pay for a technician to look at your failing part? No I dont think so! Just send me the part - Ill replace it myself. Im a millwright electrician by trade. I specialize in power plants and refineries. Im sure this little gas valve wont be a problem. I spoke with these idiots on a Friday and he said I could have it ground shipped for free and it should be here in 5-6 days or pay extra for quicker delivery. What the hell did he just say? I could pay extra for quicker delivery on Whirlpools faulty part? ** whirlpool should be saying Well have the part overnight to you.Now since it was a 3 day weekend theres no sense in me paying $40 to have it delivered 3 day because it still wouldnt arrive until close to the five day. So I just looked to see where my damn part is because it shouldve been here by now according to the guy on the phone. NOPE! Its set to be delivered in 5 more ** days. DONT BUY A WHIRLPOOL PRODUCT. THEY DO NOT PRACTICE ETHICS.

My Whirlpool range is a great buy and it cooks well. I have never had a brand new range that snaps, crackles, and pops. It was letting me know that it needed to be broken in and used for a while. I have had it for a few years now and it is just now getting broken in well. I do not even smell the brand new burn smell it use to give off anymore. Awesome!!

Whirlpool Dishwasher purchased at ABC Warehouse in Chesterfield, MI and was delivered on 10-2-2014, and one year later, we noticed that the tips of the lower basket were coming off. We contacted the holder of the extended warranty (5-yr.) and also Whirlpool. Both replied the fault was cosmetic and was not covered by warranty, that only mechanical/electrical components were covered. When we were buying the extended warranty, we were told that we were covered for all issues that may occur. We werent told cosmetic flaws were not covered. I guess consumers should, before buying a new product, make a specific list of possible problems, and make sure whats covered and not covered. We have been unable to resolve this issue.

So disappointed with my Whirlpool purchase. I will never purchase another Whirlpool product in my life. This is my second whirlpool oven to die in a short period of time. My most recent oven only made it two years. For there to be an internal wiring issue that is now costing me $500 to repair on top of waiting 30 days for them to be able to fix the oven. This is a terrible product. Unfortunately, I didnt realize the poor quality and poor reviews prior to purchasing from this company. PLEASE be advised.

I bought a Cabrio 2 yrs. ago and I wish I had my old washer back. I read reviews and checked out a lot of literature and thought I was getting a quality machine. What a waste of hard earned money. I cant get clothes clean, its loud, and it leaves soap residue even after an extra rinse. Whirlpool products arent what they claim to be. I had a freezer I bought because I bought a half a steer and it quit running and I lost all my beef - $700.00 worth. From now on I will stay away from any Whirlpool products!!

The refrigerator I have is 3 years old and the service tech will be at my house on Thursday to put the third comp. in it. I have lost all my food 2 times. Times are hard. I would like to talk to a person not a machine.

Whirlpool fridge with serial # EL2427127 started on fire. Flame started on own but filled entire basement with electrical fire smoke. All terminals on compressor completely melted off. After researching online, I see Im not the first. Unbelievable.

We purchased this Gold Series Whirlpool Dishwasher about 4 years ago. It worked very well up until April of this year. At that time, the main pump stopped working and it has to be replaced. There are just two of us in the household so the dishwasher was only used 2 or 3 times a week. We also kept it very clean with no build up. The gasket around the soap dispenser came out and one of the wheels fell off of the bottom rack. We just feel that 3 1/2 years is too soon for a major appliance to stop working and fall apart, especially given the light usage.

Its now Nov 8 and Ive been officially dealing with this issue since Sept 26. This washer was installed in a new home. After less than 10 loads, my washer stopped draining and I was left with a load of towel soup for over a week while waiting for a service call. I still have the same defective non functioning washer sitting in my home and have been unable to do laundry at home in all that time. So far Ive spoken with 2 customer service representatives. The first was incapable of scheduling a service call. She clearly did not understand how to operate the database used for scheduling. I was finally able to schedule appointment on my own but had to wait a week before the technician was able to come by. It was determined that either the latch mechanism or the mother board or both are defective from the factory.The second was just plain dismissive and completely unhelpful. I sat on hold for about an hour each time before getting to speak to a person. Ive also received two canned emails in response to my poor review of this washer on the Whirlpool website. They basically blame COVID for the delays and state the parts delivery should take 3-4 weeks. I was originally told 14 working days for delivery of the parts. We are already past both deadline with no end in sight. At this point, Id like the defective washer replaced rather than repaired. And for the record, this was a new washer (less that one month old) installed in a new house that now stinks to high heaven because slimy, scummy water that will not drain out has been there since September 26. Id really just like for someone at Whirlpool to honestly care about this and take a moment to address this issue.

We purchased a new home April 2013. All our appliances were new Whirlpool stainless. Looked nice. After almost a year our microwave started acting improperly. Beeping, changing screens, not working when buttons pushed. Then the micro wave had a melt down and caused the glass try to break, parts to melt and caught fire internally melting plastic. Notified Whirlpool and they sent out individuals to repair. After several weeks the repair was completed and we were advised that they did not understand why this would or could happen. We should be fine now. Well we are now again having this unit beeping, changing screens, not working when tried, and when entering numbers, number and time are not what was trying to be entered. This unit my wife says is possessed and she wont use it. She fears it will burn the house down. It is Velos model TR 2 24 11000 serial number. It now beeps and changes with door open as I read the serial number.

Bought this model #WTW8500DC from Lowes in 2015. Ever since had problems. Stopping in the middle, not starting, recently keeps running water, lid lock issues, had multiple service calls and multiple hardware changes, paid extra for extended warranty from Whirlpool hoping that within a year all problems would be gone after so many repairs. Boys I was wrong. After spending around $1200 between this machine and the extended warranty, three year later after the warranty expired now I am stuck with this non-functional piece of junk and looking for another washing machine. Would love to hear from Whirlpool if I stumbled upon a lemon, or three year is expected life of their $1000 plus machines.

Im 61 so I have some experience. I personally know fridges that have lasted over 20 years. I just Googled it and found out the norm is 14 to 17 years. This hunk of crap lasted 4 years. As soon as I got it home and plugged it in (4 yrs ago) the most noticeable thing was the noise. It sounded like a tractor! I considered taking it back (wish I did). Then after a couple of years the pull handle came off! The whole time we had to be careful the door was closing properly. It was problematic. Ive owned (and re-sold) about a dozen fridges in my life. This the first one to fail on me. It was bad from day one!

We purchased a Cabrio washer in August 2013, in early August 2014 we noticed that it was not getting all of the detergent out of the clothes (noticed it on the dark clothes after drying). We use less than the recommended amount of HE detergent and dilute it in the dispenser, also always use the extra rinse. We just had a Sears service man out at a $100 cost only to find out that he gets these calls all of the time and the machine is operating at the factory settings.After reporting the problem to Whirlpool all I got was we are sorry and a link to how to operate the washer. In the demonstration video it clearly shows that the water level never covers the clothes. I know Im old school but in my opinion the water should cover the clothes so it can properly wet and agitate the items in the washer. To say I am less than satisfied is a gross understatement. Im out the cost of the washer plus an additional $100 and after a year of ownership and contacting Whirlpool less than a week after the factory warranty ran out all I get is an Im sorry you do not know how to operate a washer.

This microwave is one of the best Ive ever used. Ive had several brands from generic on up and this one takes the cake. Its very reliable. It works excellent and heats up fast. Ive had no problems with it working to full capacity or any fear of it breaking down. Its pricey but well worth the cost if you want worry-free warming and cooking.

Dishwasher (WDT710PAYM5) handle on the left side loosened within 2 weeks of purchase. Today the handle fell completely off. The dishwasher will be a year old in August of this year. I cannot figure out how to reattach the handle and there is nothing I can find in the owners manual to help me. There are only two of us and I am the one who uses the dishwasher. This should not have happened. Not real impressed with this machine.

Whirlpool Gold Series - I bought this dishwasher less than 2.5 years ago. The thing already broke. The motor needs to be replaced at a cost of about $250. The thing never did a good job anyway and often had to run it more than once to get dishes clean. I paid about $650 for the machine so I guess its just a throw-away appliance. Whirlpool makes complete junk. I will buy a different brand that is known to have long-lasting dishwashers. I guess you get what you pay for.

I have spent 30 minutes trying to change light bulb under the oven and get the cover plate back on. I watched the film on how to do it, it was amusing to watch the struggle to get it on. It was amusing to say the least. Whirlpool watching it??? I do not believe whoever designed this worthless time consuming light cover never tested it one time, or it would had been more user friendly. It amazes me what kind of trash they can build for us consumers to have to deal with at times. Tomorrow this overhead piece of junk is coming out and being replaced by a non Whirlpool one. I am going to get a tractor and smash it into little pieces and put on side of street with a note saying this is what happens when you try for an hour to change the bulb.

Sears, Whirlpool Cabrio Platinum washer and dryer purchased spring of 2013. I thought this would be a good combination to purchase quality appliances that would last for years. NOT! These machines are used by my wife and I only. Washer: Bearings go out. Repair: Replace tub and bearings. Quote: These things arent made to last more than about two or three years. Another quote. Do you notice that your clothes arent getting dry? Yes. Yeah well, you have to use the timed dry setting because the regular setting shuts off as soon as it senses one piece of clothes is dry and leaves the rest of your clothes damp. DO NOT BUY.

Whirlpool White Ice gas range with aqualift technology. Whirlpool uses a self-cleaning technology called AquaLift to clean the oven. It does not work. It does not clean the oven no matter how many times you run the cycle. I have contacted Whirlpool 3 times and they did respond. They first suggested buying their oven cleaner. I purchased the oven cleaner and it did not work! They then said that aqualift will only clean the bottom of the oven (it does not). Who buys a brand new oven that does not have a self-cleaning feature? I read reviews online prior to buying this oven and unfortunately for me, there were no bad reviews. However, I just checked again and there are numerous reviews stating that aqualift technology did not work for them either. This oven bakes but it does not clean and Whirlpool will tell you not to use oven cleaners in your gas oven because they will damage the surface of the oven. I currently have a very dirty oven and no effective way to clean it! Do not buy this oven if you want a self-cleaning oven. This oven should be recalled and money refunded. I would never knowingly buy an oven that does not self-clean. This Whirlpool with Aqualift is not effective and the company had to test this before it was marketed. I do not know which brands to recommend at this point as I am stuck with a Whirlpool gas oven that does not self-clean. The oven is only 1.5 years old so I will be stuck with this oven for a few years. Do extensive research before you buy any appliance.

I purchased model FG1F4040SEPV Whirlpool water heater from Lowes about 5 years ago and have had to literally replace the thermocouple each year. At least 3 of these years we have had to pay someone to fix this for us until we learned to do it on our own. Im very surprised Whirlpool didnt recall these water heaters and make it right for their consumers. What this did for us was confirm that we will never purchase another Whirlpool item ever again. We are switching over to Kenmore!

One month after the delivery/installation of this new refrigerator, it began making loud noises when cooling the top refrigeration unit. After the 4th service call and replacement parts, the noise ceased for 3 months. The noise has returned and Im now scheduling the 5th service call for the same problem. Thank goodness I purchased the extended protection plan through Lowe’s when I bought my three new Whirlpool kitchen appliances. Whirlpool used to be known for quality and dependable appliances. That no longer is true. SAD.

It’s just a month old not even - and the dishes are not coming out clean. The cups are stained and I don’t feel it’s clean as it should be given it’s a brand new machine. I would not recommend this particular brand in Dishwashers.

Mtf18 defective refrigerator - The unit is 2 yrs old and about 6 months prior to 2014 I could not keep ice in the refrigerators ice (freezer) and the appliance compressor ran 24 hrs. a day without recycling or stop. I did not purchase an extended warranty, after all, Maytag the dependable company. The lonely Maytag repairman. Right!! The unit cost $$700. and is now an anchor. You cannot repair the compressor, only replace it...

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

Updated on 03/15/2020: We bought this eight years ago to replace a 20-year-old Maytag that had finally developed a rust-related leak after serving us faithfully and needing only one almost trivial repair ($10 DIY lid switch replacement) over that period. I have replaced the water pump, the gear case, rotating seal (3 times), the lid switch striker (3 times), and the replacement gear case is making noises indicating incipient bearing failure. In its finite wisdom, Whirlpool decided to make the failure-prone main bearing irreplaceable, which means you have to replace the entire gear case, at a best-case cost of $120 and a worst-case cost of $300, plus labor, unless you do the work yourself, as I do. The secondary issue is mold and a musty odor. The most effective way to eliminate this is to pull the drum (non-trivial, requires a car jack, a 2x4, and a special spanner/wrench) and swab down the inside of the tub with disinfectant. (Been there ... done that three times over 8 years.)Original Review: I am in the process of replacing the bottom seal on my 6-year-old Whirlpool Cabrio (WTW5500XW2) washer. This will be the fourth major repair I have done on it. Fortunately, I can do the work myself and know how to find the best price on parts, but it is still discouraging that a lightly-used washer would have so many problems in such as short time. (It replaced a 20-year-old Maytag that finally rusted out.) Repairs to date: 1) replaced drain pump motor; 2) replaced lid switch; 3) removed basket twice to clean outer tub, due to mold and odors; 4) replaced suspension rods due to excessive spin vibration; 5) out of commission awaiting a new bottom seal. Total cost of parts (labor was on me) is well over $100.

The washing machine continued to display an F1 error code. I contacted the manufacturer and was told that they will not do anything about the problem due to it being out of warranty. This is the first time I have complained about a product or service and want to try and assist anyone who may be thinking of purchasing a washer from Whirlpool. I do not recommend purchase of these units.

The control knob broke off the washer when it was only two years old. I contacted Whirlpool by email about what happened with the dryer. The control panel is held tight to the dryer now with duct tape and the knob is held on also with duct tape. The knob doesnt work. It is stuck on timed dry so I can at least use it and adjust the time. I cannot use any other setting. It would cost about the amount of the dryer to have it repaired. The customer representative informed me that sometimes things dont last. Im glad for his profound wisdom, but Im stuck with a dryer held together with duct tape. I was offered an extended warranty, but the cost of repair will be nearly the amount of a new dryer. I will seek a different brand in the future.

I bought the HE Whirlpool Cabrio 2 years ago. It has all the bells and whistles, fancy cycles, etc. but doesnt clean ANYTHING. I have to wash three times to get things clean... So much for energy efficiency. It also gets out of balance with larger loads. What a waste of money and time.

My Gold Series Whirlpool Electric Range is 3 years old. The main board for driving the burners, oven, etc burned up which caused my oven to go from the 200 degree setting to 450 in about 3 minutes burning everything that was in the oven. They want $400.00 + installation to replace it and that is if one can be found to actually install. The stove was purchased for $850.00 because of the Brand and now they want half that value to replace a board that will likely fry again in a year or two. I find there is no value for money and will not ever buy a Whirlpool brand again.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

I bought a fridge from this company not even 14 months ago. Went away for a week and came home to a fridge and freezer of rotten food. The fridge had died - Im guessing not long after I had gone away by the look and smell of the food and house. I have had nothing but the run around ever since that day. Spoke to this person and then that person. The electrician confirmed that my fridge is completely dead because of the compressor. So they sent a report to Whirlpool and they have now confirmed that I will get a new fridge. Now Im being told that will take 7-14 days. So I have been left with no food whatsoever as well as no fridge. I have two kids and cant even buy shopping for my son to take to school. And now Im being told that I had 9 months left on the warranty for the fridge that died and that’s all I will get on a new fridge. Should I not receive a new warranty for a new fridge? And should they replace my food? Could really do with some feedback on this matter. Please help me.

Bought a Whirlpool Cabrio Washer Dryer combination on 4-5-2009, had it delivered on 4-20-2009, was very excited to get this set as it was like my first ever brand new washer dryer. I thought Id spend the money get something good and it would last for years and years. Was I ever wrong. I bought the set and the extended warranty from Lowes and my total with delivery was 2579.00. 20 days after the extended warranty expires (that I never used) the bearings on my Washer go bad. This thing in spin cycle sounds like a jet engine. I called to see if Lowes would still honor my warranty because I never used it and they said no. I called Whirlpool and checked to see if there was a recall and they said no. I checked to see if there is anything they could do at all because this is a huge known issue and of course they said no. (Just look on YouTube for Whirlpool bearing replacement and the amount of views should indicate the amount of troubled users.)Called a repair scheduled through Whirlpools website to come look at it for a 75 dollar assessment and they said it would be about 500-550 to replace the outer tub - largely due to the fact its labor intensive and the bearings are packed in the outer tub from the factory. I was like are you ** kidding me? I paid 1029 for the unit brand new in 2009 and 550 to fix? I said thank you to the repair guy and escorted him nicely out. Upon that I called back Whirlpool to tell them how displeased I am and how I will not be another product of theirs ever and mostly due to the fact they know this is a huge issue and wont do anything about it. I will be going to Lowes to see if the guy who sold me this pile of crap will work me a deal on another unit or set of another brand after I show him my receipt and express my displeasure with that product. If they wont do anything I will go to another store and spend my money elsewhere - I have choices and others do too. So if you are thinking about buying anything in the Cabrio line, dont. Go Samsung or LG - 10 year warranty straight from the manufacturer and costs 200-300 less than I paid for my washer dryer 5 years ago. The bearings are ** and shouldve lasted a lot longer for the amount I used this machine and for what I paid! Shame on you Whirlpool for using crappy parts to make your machines.

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

Front load is terrible. Doesnt wring clothes thoroughly. Runs for 1 hour on fastest cycle. A HUGE WASTE OF ENERGY! NOT A GOOD MACHINE!!! Our clothes are wet always after the spin cycle. It also doesnt do small throw rugs. Awful!

In June 2003, I purchased a Whirlpool Gold Conquest Side-by-Side satina finish refrigerator (Model Number: GAS6SHAXLL03; Serial Number: SP1452552). The ice-maker has always had freezing up issues which I never complained to the company about. It has made weird noises (nothing major) but was already out of warranty. I paid $1,600-1,700 for it. I did not have the money to pay for repairs and I am sure that the repairman would have never found the problem. Two days ago, there was an electrical smell in the house. After an hour or two, it started getting stronger and stronger so my husband looked at the fridge. There was smoke pouring at the back of it so he pulled it away from the wall and we unplugged it. Surprisingly, the plug was not hot. Had I not been home, it could have caught fire, burned the house down and killed my dog! I am furious about this. When I called, Whirlpool says, That model is not under a recall. Would you like me to transfer you to service for repair? Really? Those big corporations dont care! There needs to be a recall on this because I have seen this same problem many times on blogs and forums. Well, guess what, I used to be a Whirlpool fan, not anymore! Now, I went and purchased a new refrigerator, and the brand name is Samsung! I recently bought a Samsung front loading washer and dryer and they are great. It looks like the Whirlpool dishwasher in my kitchen will be next! I bet Samsung makes a nice dishwasher.

Ive had the stove a long time with no issues. The self clean doesnt really clean of course. In my experience, I dont think many do clean well. Maybe there are newer ones that do work better. I would probably buy Whirlpool again.

I bake a lot so my husband bought me a new gas range for our 54th anniversary. After the first few times I used the oven, I decided to clean it. I noticed then that there were some burnt grease spots and streaks between the oven glass door. After 2 years of use, it has gotten much worse so I decided to take the door apart to try to clean the glass in between the layers of glass but there are three instead of two. I cleaned the inside of the outer glass, but that didnt take care of the problem. Most of the stains are between the other two panes of glass. That, I cant get to. I feel that this is poor design and not sealed properly. I take good care of everything I own and I expected this range to last me the rest of my life but it is put together with cheap plastic parts that wont last long. It is the first new range that I ever owned and paid a lot more for it than any Ive had. I expected better.

Worst service ever. This is my 4th refrigerator (I have 2 homes and moved a few times) and I have NEVER heard of a compressor going bad in 8 months. This was a new fridge, and all of my food went bad along with my infants milk. I cannot express how upset we were, and Whirlpool told us that they cant do anything for us, and it was just something that happens. Basically, they told me, Sorry for your loss... you should buy a longer warranty since this is not covered if it happens after a year. This is Whirlpools way of telling me, we dont care if you use our product. I am amazed that they wont give us even a credit for what happened. NEVER BUY WHIRLPOOL.

I purchased a Whirlpool Cabrio washing machine April 2016. I was so excited to have a new washing machine. I thought the 1st couple times I used it I just didnt have settings right. It uses so little water it doesnt get all clothes wet. If they are not wet they cant be clean. So I started doing very small loads. Then clothes were not clean. They stink. So I have tried every detergent out there. Nothing helps. Another thing it takes an hour or longer per wash to get not so dirty clothes. Not to mention it puts holes in my towels. I tried reaching out to Lowes where we bought it only less than 4 months ago only to be told they would contact Whirlpool. Whirlpool wanted to send tech that I would have to pay for just to tell me that the piece of crap washing machine is doing everything the manufacturer made it to do. I told him I was not going to pay so. I think with all the problems people there should be a class action lawsuit. DO NOT BUY CABRIO!!!

I am very sorry I bought this machine. CU rated it pretty good. Nope. 1 - It rarely dries everything completely. e.g., the collars of t-shirts or turtleneck shirts are damp after the load is finished. I have to run the machine again....Energy efficient? Energy schmefficient. and I havent even TRIED to use the low heat delicate cycle. 2 - The cute modern buttons are hard to push in. 3 - The top of the machine doesnt have a level lid... Its curved. Not very useful for setting anything on while you work at any part of your laundering process.

I had started the dishwasher and had gone to bed last night. I came downstairs ten minutes later to get a bottle of water. There was smoke throughout my downstairs levels. Our Whirlpool Gold Dishwashers control had dark, noxious smoke emitting from it. I tried to turn it off but it was too hot to touch. I went to the breaker box and shut it off there, turned on fans, and went back to bed. This morning, it turned the electricity back on. It started smoking again. I tried to cancel the cycle but it wouldnt cancel. I opened the door to stop the cycle and it continued spraying water and still wouldnt shut down. I had to shut it off at the breaker again. Next problem is my refrigerator, washer and dryer are all on the same breaker. UGH! This is the second Whirlpool I have had. The first one had a rusted tub that leaked into our basement. The repair guy said he had never seen that before...sure...why would you put something in a dishwasher that would rust out on you? Whirlpool, NEVER AGAIN. I WILL PASS THIS INFO ON TO EACH AND EVERY PERSON I EVER KNOW. COUNT ON IT.

My hot water tank wont stay lit. I replaced the heating element, and the thermo couple. It will light up now but it only stays on for about 10 minutes.

I am very upset about this Washing Machine and Dryer. I did my research in 2012 and found good reviews on drum size, water usage, bells and whistles. I purchased the set in Feb of 2013 (its on Jan of 2017). NOT EVEN 3 years later, I write to say that my washing Machine is ready for replacement! I paid 989.00 for each and last year the Spring on the Glass Top was worn away, I am told because bleach was splashing up in the spring area. Cost to fix with a local repairman... $235.00. Now I noticed a small amount of water on the floor, move the washer and there is a LARGE amount of water Stain and my cycles keep popping up UL. Two separate repairmen (because I didnt believe my trusted first one) tell me the cost for the shot bearings and seals will cost almost as much as a new washer! I am a family of 3. I have a daycare so do a few extra loads, but am not using this any more than average to low use. Not to mention that on top of all of this the computer appears to be shorting out and to order a new panel the repairman places that at an EXTRA 300.00. SO UPSET! The dryer dries very nicely and is quiet however, the motor went out 6 months ago and we replaced that, not wanting to but better fix than scrapping it only 3 years into a product expected to last well over 10! The little clip on the door to lock it is also loose and hardly locks now. The repairman is having trouble even finding the small part. Young Couple Expecting to have a brand new 1900.00 washer dryer set last a long time only to be out of warranty and already needing to buy a new set! DONT EVER BUY A CABRIO WHIRLPOOL.

After having an expensive front loader (ugh) we purchased the Whirlpool Cabrio top loader (wow)! Best washer ever owned, wouldn’t trade it for any on the market! It has been as great and problem free as the front loader was terrible with cleaning and smell.

Our long and tortuous experience began in 2013 and continues to this day. But Ill just give the headlines. In August 2013 we bought Whirlpool BTM French Door KFIS20XVMS11 from Lowes. Three years later we learned that model number appeared on the attached recall notice which had been issued just days before our unit was delivered in September. Neither Lowes nor Whirlpool notified us of this recall which described a simple repair to a part that was leaking so slowly that its effects took three years to show up in a destroyed floor and cabinet enclosure that will cost $2981 (and still rising) to repair.We called AIG, the company behind the extended warranty provider, and they responded promptly by dispatching a Whirlpool factory authorized service technician who attempted unsuccessfully to drag the unit from its alcove over the warped, erupted floor beneath. With the refrigerator half-way out of its enclosure, the technician stopped and asked us to sign a waiver of liability. When we refused, he announced that the problem was water damage and he jammed the unit back into place, leaving dents in both doors and the freezer drawer below.We went to Lowes, who strung us along for several months before sending an engineer whose report concluded that the problem was a manufacturers defect (The Lowes engineer and his associate damaged the unit further when they forced it back into place over a floor made more uneven when they removed the pieces of rotted oak shown in the accompanying photo.). Based upon the engineers report, which Lowes said it had no duty to share, we were given a 1-800 number for Whirlpool customer service, with assurance that we would be taken care of. Although we had to start from cold without the engineers report, Whirlpool customer service was initially very accommodating and gave us hope. For a moment, I thought we were going to get resolution. They assigned a case number and we supplied the requested documentation. That was on a Friday in March, 2017.Monday we were surprised to receive a sternly worded notice from the Whirlpool Law Department that a clerk there would be taking over our case. We realized that we were far from resolution. Why did the Law Department intervene? We dont know. We guess it may be because they want to avoid a class action lawsuit on behalf of possibly thousands of leaky refrigerator owners (Whirlpool, KitchenAid, Maytag, Jenn-Air and Amana units were all among the affected). In any case, since January we have been monkey-in-the middle among Whirlpools various departments, Lowes various departments and AIG, with no progress. What do we want? We just want things back the way they were before our leaky refrigerator did its damage and before Lowes and Whirlpool demolished our good as new looking KitchenAid refrigerator in the process of telling us they wont fix it.Footnote: We purchased all new KitchenAid Architect series appliances in August/September 2013, including top of line cooktop, dishwasher, convection microwave, convection oven and a French door cabinet depth refrigerator. Every unit except the cooktop has required warranty service, including five expensive electronic parts replacements. Fortunately we bought extended warranty service from KitchenAid/AIG, who have been terrific to deal with on the parts replacements. I dont recommend Whirlpool appliances but if you are intent on buying them, I do highly recommend extended warranties. As for the value of Whirlpools manufacturers warranty, watch this space. Ill be back with the final resolution.

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

Whirlpool Cabrio - What a nightmare. One year in… from the beginning the washer completes a cycle without attention. It gets stuck in a rinse cycle and eventually stops with an FF error display. Because of this it wastes HUGE quantities of water and takes far too long to actually wash clothes. It is so frustrating. We will buy a new Bosch and THROW this way. We cant even pass it on to our grandchildren.

We have had a GX5fhdxvy 07 Whirlpool Gold French door fridge with bottom freezer that is approximately 4 years old. Since the first 6 months of use, so 3.5 years now, we have had continual problems with a flat sheet of ice on the bottom of the freezer which then builds up and leaks all over our floor. Twice I have slipped, once banged my big toe to the point of cracking my big toenail and bleeding profusely, and the second time I slipped on my butt and really hurt my back. This is of real concern as one of my children has Cerebral Palsy and autism and could really hurt himself in our kitchen. We originally called while it was still under warranty and the technician said that we will need to learn how to defrost the tube that seems to be getting built up with ice. Thats the only way to fix it. We thought it meant fix it for a long period of time. After several months of this re-occurring problem, we realized that this is something you need to do very frequently, meaning several times a week. We have had no help from Whirlpool, they tell us that essentially it is our problem. They didnt even offer to provide parts. They were not interested in our problems and just asked us if we wanted to pay for a service call, and that was it. Now but what kind of service is this?? Clearly, after researching these products, this is a design flaw and a lot of consumers have complained about the the same issues. You would think that Whirlpool would have the decency and the business smarts to create a recall to solve consumers issues.Unfortunately, I am not able to purchase a new unit. This was an expensive purchase as it was… and we have absolutely no resolution to the problem. I have to say that after our injuries in our household, eventually someone will slip and do some serious permanent damage to their body or even worse, fall and sustain a head injury and perhaps even die. And although this may seem like a far fetched comment, it really isnt out of the realm of possibility at all! How long does it take for a manufacturer to respond to a flaw in their design??

Whirlpool has always been known for quality products. But the range I haves burners are failing. It is eight years old. Think it should last longer than that. The oven works good, but the temperature varies as well. Lower oven door is designed bad, because grease gets trapped between the two glass doors and cant be cleaned.

Bought a Whirlpool Cabrio HE washer over a year ago. Recently, the spin and drain cycle stopped working. Went to find a repair person only to learn that many dont work on this model because of all of its problems. Did find a company who replaced a part ($100). Now sounds like a thrashing machine when it spins. However, now the machine wont even go through a regular cycle. Dont buy this brand!

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

Washing clothes is a nightmare. I am constantly removing clothing from the washing machine that have been torn and left with holes. I am utterly frustrated. Because the machine is more than three years old, there has been no solution to my problem. I have now replaced clothing items in excess of $2,000. I am always here that they will send a repairman and yet there is still the problem. This machine is costing me too much money. The newer machines have fixed the problem. There is no gap between the drum and the doorway or rubber piece. I want that piece to stop this nightmare. This machine has taken a dream of mine and demolished the experience. I hate washing clothes but more so having a machine at home and then going to the laundromat to stop the chaos with doing laundry at home.

A reliable machine at a very really good price. A nonsense machine that does a very good job at cleaning our clothes. Has a good number of features that make washing different materials easy and safe for their fabric types.

I bought the Whirlpool gas water heater less than 1 year ago from Home Depot. It does not work. The pilot light will not spark to ignite the gas. Customer service is never available when you call, you get a message machine. Going forward, I will never buy a Whirlpool product and I will recommend friends and family to boycott Whirlpool. The 6-year warranty is worthless. You cant rely on the warranty. You cant rely on the water heater. You cant rely on Whirlpool to stand behind their product. The water heater is junk.

I am a working single man. I needed a used washer. I shopped the new washers but they were a lotta money. I seen many of them were without agitators. Well heck... who am I to judge the progress in technology?? So, going around to the used appliance store I run across this Whirlpool Cabrio. OK, Whirlpool meant quality my entire life. So, I bought it. MASSIVE MISTAKE!!! This POS is no washing machine. I dont know what it is, but it is NO washing machine! It is a machine that runs a very few gallons of water into a load of clothes and makes them wet, and that is about it!!All I know is the federal government is dropping the ball on this situation BIG TIME!! To allow a company to foist off on consumers such a PILE OF JUNK!! The pile of crap is PURE junk as far as simply doing its job... washing clothes!! It is a DISGRACE of an American product, and I will NEVER buy anything made by Whirlpool the rest of my life!!I took the device off the lid that tells it when the lid is closed, and just stuck it in its receptacle in the body... so I could raise the lid while it is running and watch this POS in action and try and figure out what the hell is going on. First big problem is it NEEDS an agitator!! Obviously Whirlpool had not figured out how to make the clothes circulate without one. Second is the water level (no matter what cycle setting) is obscenely LOW!! The clothes do not circulate AT ALL, and about 1/3 of them do not even get below water level for the entire cycle!! What I am forced to do is use a water hose and run a lot more water off into the tub just to get the clothes in the damn water!! And ever at that, the clothes still do not circulate AT ALL!! They just rub up against each other!! And I have to use twice as much soap than called for!!

I wish I had gone on this website and read the reviews before I bought my washer about two years ago. I thought the Whirlpool Cabrio was going to be a good machine because of the brand name and because it is one of the more expensive washers. Like many others have said, I am disappointed with this washer. I bought it because it has a large capacity, but mostly because it has a hand wash cycle and a deep water soak. I have found that the only cycle that actually may get clothes clean is the Bulky Items cycle, because it actually covers the clothes in water. Some of the other cycles dont even get the clothes entirely wet. And the deep water soak doesnt wash the clothes, rinse them, or spin them dry. I might as well pre-soak clothing in my laundry tub, and then put them in the machine to wash them. Prior to this machine, I had a Maytag Neptune front loader, which did alright, but it had a few problems. I am ready to go back to the inexpensive agitator machine my mother used to have, if anyone still makes them. They at least got the clothes clean, and you could soak clothing if you wanted to. Im sorry that I bought this expensive washer. I wish I had bought a relatively inexpensive, simple machine. One good thing about this machine though is that I was able to wash a sleeping bag on the Bulky Items cycle. So, I didnt have to take the sleeping bag to the laundromat. Whirlpool needs to improve this machine or go back to the drawing board and create a new one.

Don’t ever buy Whirlpool smaller (apartment) size front loader washer and dryer - from Home Depot or anywhere else. Beware of rules in warranty plans. I am very dissatisfied with them. I have had several service calls.

Bought a new Whirlpool range in 10/20. In 06/21 the control panel stopped working. Now they say the necessary part will not be available until 10/21! 5 months without a working range! Dont buy Whirlpool--shoddy products and terrible customer service.

I have purchased two Whirlpool microwaves since 2007. The first unit lasted 5-1/2 years, the second one lasted only 2-1/2 years. I used it at dinner but several hours later it was dead. After reading other reviews I have decided it would be cheaper and less stressful to get a new one. So Tomorrow I will be purchasing a new microwave which WILL NOT be Whirlpool. I no longer have confidence in any of their products.

Whirlpool Washer WTW8700EC + Dryer WGD8700EC. Bought to replace a 35-year-old Whirlpool set that is still working and had no repairs in that 35 years of ownership. Gave to family member and its working well. Was not a cheap item but well worth the money. It performs beautifully. I chose Whirlpool. It is a proven brand with a long history of reliability. When I bought my last Whirlpool, I bought the top of the line model washer and dryer. They say you get what you pay for and that holds true in my case as has with many others who believe it! So this time I did the same thing and bought the best top loader they had. It has many options I still need to learn. I just use it like the old machine and dont need to worry about types of fabrics or making mistakes. Just follow the instructions for detergent and softeners and all is good. This machine cleans as great as the old one without beating the clothes to death. New agitator design keeps from paddling the clothes, so I dont need to use the gentle cycle or medium to preserve the clothes. The dryer I can say is most efficient as I noticed it took far less time to dry, and notice a small drop in my electric bill and gas bill. I think this will be my last machine ever needed. I do take care of my things and I do clean and polish my machines, they are an investment like a car or house. Front loaders have a lot of problems with leaks from the doors. Will stick with top load only!

My stove is great. The only thing I would change is one more big eye. Having two big eyes would really help. I also love the oven although I have to pay attention because it heats on the hot side. A cake will be done in 18 min instead of 20 or 25.

It doesn’t drain and ties clothes in knots. Spots appear on clothes after washing completes. Clothes never get clean and always have an odor. This is the worst washing machine on the market.

This dishwasher (model #WDT710PAYM5) leaked water after having it for 9 months. Service man came out to look at it and said it wasnt level. The very next day when I use it the water came out again on my wooden floor. Now the wood floor looks like it has water damage. Sadly this floor was just installed.

I have had this range since 2008 and used the self-clean last week. (I dont use the oven that often) Since the clean it has not heated up to required temp. I just called Whirlpool and a tech is coming out this Friday (Nov. 15th 2013). If it is determined to be the self-clean that did in fact cause this, the tech calls for an authorization and the repair is covered by Whirlpool. I will report back what happens.