I purchased this washer two months ago and have been greatly disappointed with it. I put in a large load on wash cycle, but the rinse cycle is barely any water, and is all soapy water, so then I have to turn it back to wash cycle to get more water and then back to rinse to finish it properly. I was never told about the short water cycle, why not? It is still under warranty, but said I have to deal with Whirlpool, and all they can do is send a repairman out and if it is not a defect, it will cost me $130.00 for the service.

I will never buy a Whirlpool product of any kind. I bought a gas stove and its a piece of **. Won’t even light. Only way to start it is start boil then switch over to bake then it wont light. So please I ask that you make a product thats worth buying.

I purchased a Whirlpool washer (WTW4800Q) in November 2011. Already, it has rust in the tub. The warranty does not cover this. I never really liked the thing since I have had it. It takes much too long. Lid locks and then starts over. Also, warranty is not good. I wouldnt ever buy their product again and suggest no one else should either. I loved Maytag before Whirlpool bought them out. Im putting this one on Craigslist and buying a real washer, a Speed Queen! Yes, Speed Queen has all metal parts and makes a home washer. Just have to find a local dealer. They are there.

I purchased all new, upper end Whirlpool appliances for our newly built home just 6 months ago, to include a side by side refrigerator with ice maker and water dispenser, an over the stove microwave, a smooth cooktop oven/range, a dishwasher, a washing machine and a clothes dryer. We plugged in the new refrigerator, and after 24 hours of letting it sit and get cold, we bought $300.+ of groceries and filled our new refrigerator. We pulled the milk out hours later and it was warm, checked other food items and found them to be warm, too. I placed a thermometer in the refrigerator and it read 55 degrees. In disbelief, I placed a second thermometer in the refrigerator and it, too, read 55 degrees. Being brand new, only hours old, and clearly not working, I called for a replacement refrigerator. Our builder said we needed to call Whirlpool for a replacement. Whirlpool refused to send us a new refrigerator. Needless to say, we had to throw out all of our food for being dangerously off temperature, and we were less than happy about wasting $300.+ on food we could not safely eat, but glad we didnt have food poisoning. Not even the freezer could maintain a temperature below 55 degrees. While waiting on a repairman, we noticed that we were not hearing the refrigerators motor come on more than once every several hours. They sent a repairman out three days later, and he found nothing wrong other than a poorly fitting door, he said. He replaced the door hinge and told us our refrigerator would be cold in 3 - 5 hours. Well, it never did get below 55 degrees, set on the coldest setting. Whirlpool was called again and they couldnt seem to get another repairman out to fix my brand new refrigerator that could not perform its most basic function, which is to maintain food at proper temperature. Again, Whirlpool refused to send me a replacement refrigerator for this clearly defective refrigerator we were stuck with. We were told it would be 2-3 weeks before another repairman could come out, and then he would have to order parts after he diagnosed the refrigerator problem, taking another two weeks. We needed a refrigerator, like most people do, so we were forced to take this brand new refrigerator and stick it in the garage, not being able to sell a brand new refrigerator that wont get cold. Angry at Whirlpool for taking our money and leaving us with a refrigerator that never worked, we bought a Samsung refrigerator that we are very happy with - it works! After 2 months, our Whirlpool above the stove microwave has the motor turn on when we close the door, and it takes several opening and closing sequences to get it to shut off. We will be replacing this new microwave when we can afford to.Our ceramic/smooth top stove/oven, takes a very long time (at least 20 minutes) to preheat and the temperature in the oven is not accurate to the set temperature, according to my oven thermometer. The cooktop surface is inferior; it gets permanent water spots and it scratches very easily even though we use the correct pans and are very careful with it, and does not come clean easily. The surface feels rough, not slick like the GE Profile ceramic/smooth cooktop range that I had for 14 trouble-free years. I am using the same exact pans that I used with our GE, and we know how to be gentle with a smooth cooktop surface. After 14 years of owning the GE stove, the GE felt slick and smooth, cleaned easily, and did not have one single scratch on it. It looked as good as new when we moved, after 14 years of use. I will be replacing this inferior Whirlpool smooth cooktop range as soon as I can afford to, as well. Last month, right before Thanksgiving, our new Whirlpool dishwasher started making a really loud motor sound and quit working that day. It would fill water, drain the water and shut off. I once again called Whirlpool, and they were maddenly unhelpful. This time, they told me they would have a repairman call me in 5 working days to schedule an appointment to come and see my non working dishwasher. After 7 days, I called Whirlpool AGAIN, to ask why someone did not call me for an appointment. I was expecting a house full of people for Thanksgiving and I had no working dishwasher. I spent a lot of money buying these crappy Whirlpool appliances and am very frustrated. This time, Whirlpool told me that they could not find a service person in my area to service the unit. As if I live out in the middle of know-where?! I live 20 minutes from Austin, the state capitol of Texas! A 20 minute drive from the capitol building to my door! Whirlpool told me I could take my 5 month old, broken dishwasher to a repair shop and that the repair shop would need to call Whirlpool before they did any work, and that Whirlpool would only authorize a maximum of $150 to repair my dishwasher. They actually had the nerve to tell me that I would have to pay for the repair, and they would mail me a gift card in 6 - 8 weeks to reimburse me up to $150 on my new, broken dishwasher that is under warranty. I was furious!! Some warranty! The broken dishwasher is now sitting next to the broken refrigerator in my garage. I needed a dishwasher before Thanksgiving dinner, so I went and bought a Samsung.I realize that all makers can have a lemon, but all of my Whirlpool kitchen appliances are junk!! I will never own another Whirlpool product for as long as I live, and I will tell anyone who will listen about our abominable experience with Whirlpools customer service and the expensive, crappy appliances we unfortunately wasted a lot of our money on. Do yourself a huge favor, buy anything but Whirlpool! Thankfully, everything else about our new home has been great. Our new Whirlpool appliances will remain a very sore subject for year to come, I suspect.

Do not waste your valuable dollars on this refrigerator. Not even 5 years old and have had nothing but issues with this fridge. The ice maker quit a few months ago, started leaking water from somewhere behind the wall panels and now the freezer door is frozen shut and the refrigerator section is warmer than the outside air. Did I mention that this refrigerator isnt even 5 years old yet? A piece of junk is a piece of junk and this fridge is a piece of junk!!!

Bought this Whirlpool Cabrio washing machine 4 years ago not knowing it was a low level water washing machine. A man would have had to design this piece of crap. Not only does it not clean the clothes because the agitation on it is as slow as sloth. On top of that the clothes tie themselves in a knot when finished. If you don’t want the frustration of clothes washing, I would highly recommend you not buy this type, if you enjoy cussing then this machine is for you.

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

Purchased a WDF530PLYM3 Whirlpool dishwasher at Lowes in 2013. Now Ive paid $96.00 to Whirlpools authorized repairman to tell me it needs over $400.00 worth of parts (user interface and control board). He informed me with new digital controls, you MUST purchase extended warranty because they are not built to last and repairs are ridiculously expensive.

I was under the impression Whirlpool washers were good. Mine always goes off balance and quits. I carefully redistribute the load several times to get it to finish (start over). Sometimes it works fine from the get-go, but not often enough. It is now 2 years old and if I were wealthy, Id shove it to the curb. There is little to like with an appliance that often must be adjusted and re-started. I will try Samsung next. It seems that American brands are not reliable. I have no special needs and will consider reliability above all. The name Whirlpool would be a deal breaker for me. I cannot abide my Whirlpool washing machine as it is more of an aggravation than something useful. Stay away from Whirlpool washing machines. They (at least mine) require the load to be balanced to a microgram. Appliances should just work and not require fiddling with.

Efficient. I like the look and the controls. I trust the Whirlpool brand, but have purchased other brands. This is probably the best dishwasher I have owned. My only regret is that it is louder than expected.

We bought a Whirlpool cook stove with a black top in 2009 and this year, in 2011, while cooking a pot of stew, the stove top burner began to make loud popping sounds. When I went to check it out, there was smoke coming out from under the pan and pieces of glass that had exploded out in small chunks. When calling the customer service line at Whirlpool, they told us that it was no longer under warranty and could not be of help. Their only explanation was that they would only cover a new stove top if it had cracked or broken this way when putting a cold pot on a hot burner. They said their technician could tell if this was why the shards of glass were exploded from the burner.

Our son-in-law bought us this Range. Before it was even a few months old the oven handle melted off, we called Whirlpool they sent a repairman to fix it. Now it is three years old, the same exact problem with the broiler handle. There should be a recall on this part, why in the world would a manufacturer use plastic for handles to begin with. Yes I can replace the part myself for $37.57 plus all other added fees but its not right nor fair when its a faulty part to begin with. My one and only new stove is actually a pain.

It is a really great microwave, but the door is falling off of it. We can still use it, but try to be careful about it. I honestly and truthfully love my whirlpool microwave as well as my whole set of whirl pool appliances. The door is trying to fall off, but we can still use the microwave. If we get another one we will probably get another whirlpool because I love it so much.

Bought a new set of Whirlpool Cabrio Platinum tin replace my Maytag that had finally died. I believe this is the worst set Ive ever owned. It wasnt inexpensive but its cheaply built. Cant wash a set of sheets without it getting out of balance, even if you carefully place them in the washer as they recommend. They knock up no matter what you do. The dryer is gas and my clothes still have to be turned back on for more time that should take. We are talking about over an hour. Ive had them just a few months but Ive had it. I want my washer and dryer to just do their jobs like you expect. Im selling them or donating them but whichever they are out of here. Whirlpool, I am ashamed of you. Putting out such a poorly made washer and dryer. Instead of the name Platinum. They should be named Salvage. Never again Whirlpool. Never Again!!!

I purchased a side-by-side Whirlpool refrigerator in May 17, 2010 from Lowes in Gilroy. After 17 months of service, the compressor went down this morning. I have called the service center and they cant give any help because it was over the 1-year limited warranty. More than $500 is good for just 17 months usage. Would it be worth it to have Whirlpool appliances? Do think about it before you choose a Whirlpool refrigerator.

Ive been a landlord since 1997 and have multiple sets of coin laundry machines. The older Whirlpool machines are great and have lasted 25-40+ years with almost no issues. Replaced a washer with this model 4 years ago and have multiple problems. Im buying a used coin operated washer thats older than this model just to get rid of it. Cost of parts is almost half the cost of a new washer, and adding on labor and time makes no sense. Very happy to get rid of it. Electronics instead of mechanics has been the problem. Electronic switch that is activated with the coin slide broke, the main board fried, and the lid switch has caused problems

This machine has been very reliable. We have had since 2001 and have had not issues, Im really not sure on how clean our clothes are. Sometimes they have a odor but this is common with front load washers. I leave the door open and put baking soda into the machine regularly. Also clean the rubber seal because mold will accumulating on it.

Horrendous product! Purchased December 3, 2014 – had service technician from Whirlpool check the unit for excessive noise 3 months later. Technician said it’s the way it is designed – ice maker in door, air has to be forced up from freezer so it makes a lot of noise! Now, 15 months later, the refrigerator has totally quit. We are waiting for technician from Whirlpool. Obviously, no extended warranty so Whirlpool said they would extend the warranty and cover this visit for $357! How nice of them since they are sure the parts will exceed that amount!!! What a piece of trash – guess the refrigerator is only meant to work about a year! NO MORE WHIRLPOOL! I am thinking about standing outside of Home Depot to warn any customers who are looking for a refrigerator not to buy Whirlpool!Updated 3/23/2016 - To add to our previous review, the service company, AIG finally after 3 days has approved the parts required to fix our with less refrigerator (15 months old.) It will take 8-10 business days for the parts to appear! We have no refrigerator for at least two weeks! Great service from Home Depot and AIG!

I have a Whirlpool top-loading washing machine model 3LA5580XSW3. The timer switch is not working and I have been told that spares are not available. Is this true? Everything else works well. Please advise as I really need a new timer.

Kitchen Aid is Whirlpool - Buyer Beware. 1.5 year old dishwasher Model #KUDS35FXSS8 lost power, repairman came and confirmed it to be the panel control and the part is back ordered 4 weeks out. Expected to come day before Thanksgiving, repairman cannot schedule until part arrives thus no guarantee date of fix. Found part online from AppliancePartsPro.com. They shipped it one day later - fixed dishwasher. Whirlpool will not stand behind part because it did not come from them. I have all the proof that it is a Whirlpool Certified Part from a Appliance Parts Pro. Appears Whirlpool would rather have a broken machine in a home rather than help the customer fix it.

Switched to bottom freezer and love the size. We all use and enjoy the filtered water. Whirlpool has proven to be a manufacturer I will always consider when making major appliance purchases for performance, service, and dependability.

We bought a Whirlpool model GC5SHAXVY01 side by side. The ice maker had problems within the first month, and they continued until the following year. Finally, the ice maker was deemed irreparable. Whirlpool worked with us, and we got a replacement for $600.00. The replacement had been in our home 3 months, when we realized it was leaking water. The guest room behind the fridge, had water soaked carpet, and molds growing on the baseboard. The hardwood under the fridge had been water soaked, and could not be dried by professional machines running 24 hours a day for 4 days. Oh the noise! The guest room carpet was pulled out with the baseboard immediately, and today, they are ripping out the hardwood affected in the kitchen. We called the CEOs office at Whirlpool to tell them. The answer was talk to our legal department.We are very angry. This has been very disruptive and upsetting. The floor is black under the hardwood. We are now awaiting the drying machines to come in for 3 days, and waiting to learn about what appears to be black mold. Be careful, and good luck if you buy from Whirlpool.

We purchased a number of Whirlpool appliances (dishwasher, double door refrigerator, Duet stackable washer and dryer). After 14 months, the ice maker broke. $200 later, it was repaired with an upgraded kit.Last week, the washer error coded and the door locked so we could not get out the wet clothes. Called customer (no) service and they advised that we needed to call a service tech because he has a special tool to unlock the door. I stopped by our local appliance store and the counter person told me how to open the door. Had the tech come out for $70 and it could be the lock mechanism or the control panel. It turns out to be the control panel, which costs $250 + labor and would total to around $500, give or take a little. We are in our 60s, my wife does not take in laundry and the ice dispenser was seldom used because I can sneeze ice faster than this can dispense it so I open the freezer door to get my ice.The tech and the store clerk said that these were common problems with these machines. This was a major expense when purchased. So far, the dish washer has not had any problems, but tonight might be the night. The reason we bought Whirlpool is because of the Maytag connection, now that is in the same toilet.

I have been complaining since 2 months after I bought the Whirlpool Cabrio washer. It is the most expensive piece of junk I have ever bought. There is never enough water to thoroughly wash clothes. The clothes always tangle up. The UL comes on all the time because it is unleveled and clothes were so knotted up that I can’t get them out of the washing machine. I keep calling and complaining, but all I get from Whirlpool is that I need to sort my clothes better and not wash all pants together because the legs will get tangled. So, do I wash some of my dark paints with towels just to keep them from tangling up? I don’t think so. I paid $750.00 for this piece of **. It should wash a mink coat for that price. I keep checking websites in hopes that there is a recall on this thing. For sure, though, I will never buy another Whirlpool product after this purchase.

I own an FG flame lock water heater and have been having the same problems with the pilot light not staying lit. This is very frustrating! I have searched many websites and am not able to find a replacement thermocouple for the stupid thing. Also, I have been told that the parts for the type of water heater that I own is no longer available. I tried to call the Whirlpool number a handful of times, but unfortunately, I was on hold the entire time and could not speak with a rep. I guess that explains all of the complaints I have read on here. I would like to be contacted or have help from someone regarding this matter! I would not recommend this product to anyone and I am very dissatisfied!

This Whirlpool Cabrio washing machine just does not do the job. It smells inside and does not get clothes clean, just normal everyday laundry. I usually have to put them through twice. It is supposed to be a water save, but I dont think it uses enough. I use minimal he detergent, yet you can see detergent residue on the clothes after they are washed, I think because there is not enough water running through to rinse clothes very well.

Moved into a house with a 2009 Gold Series Dishwasher model GU2475XTVY0. It has never worked since we moved in 3 years ago, always left dishes musty and poorly cleaned. We basically used it as a rinse/dry and pre-washed everything by hand. Even then it would mold up frequently and required manual cleaning. Total piece of junk, but looked really nice, stainless finish. Yeah.Latest chapter is it completely stopped working. Called a tech out for the usual $80+. His advice: this is a total lemon, and has been from the start. Not worth repairing. So Whirlpool, is this the standard you have now? 5-6 years for a dishwasher life cycle? Noted that my fridge is a matching 2009 Gold series, it has also had several problems with keeping a steady temp and has gone through 2 control boards at a hefty fee each. I guess Im done with Whirlpool, running out of appliance brands to blacklist here...

Does not get clothes clean. Period!! Takes just over 1hr. Noisy, lasted 3 1/2 years, transmission broke, take the warranty with a washer/dryer. Whirlpool was the top of the line, front loaders give less trouble, agitators clean better, go for the cheaper versions, our loaner Whirlpool, WTW4850H or WTW4950H washes quicker and cleaner than the Cabrio Energy Star.

Machine wont go through the whole wash cycle., Wash, Rinse, Spin. It stops and shows an error message and then I have to keep rearranging contents, over and over. This is worse if you try to wash a small load.

This machine is junk. It does not get clothes clean. I had jeans that I soaked and were fairly clean when I put them into wash and had another pair of jeans with a little dried mud. My whole load came out filthy. I am having to rewash the whole load after hand cleaning the washing machine. I replaced a machine that was 25 years old that did a better job than this piece of junk now sitting on its place.

I purchased a Whirlpool dishwasher and refrigerator/freezer from Home Depot. Within weeks the stainless steel on both products began rusting. They sent a third party repair service to look at both products and determined that, in fact, the stainless steel was rusting. Our technician said that both the dishwasher panes and the freezer doors would be ordered and replaced the following week. This was on September 4, 2015. After several promised arrival dates, the parts never arrived. I called both the third party repair company and Whirlpool on several occasions only to be told they were on back order. Finally, in late November, the new dishwasher panel arrived and was installed. It is now December 17, 2015 and our freezer door is still on back order. When asked what my options are, the Whirlpool representative simply said we have to wait. I said that because I have been so terribly inconvenienced that they should just come and pick up this piece of junk and replace it with a new one. Evidently, that is not an option. I will NEVER purchase a Whirlpool product again as they do not back their warranty. I now have a $2,000 rusted refrigerator freezer to adorn our beautiful Christmas kitchen. Thanks, Whirlpool. Youve certainly made this a Merry Christmas. (Yes, sarcasm in play.)

I did not purchase it, the stove came with the house. I like the flat-top... easy to clean. I dont like that any little spill causes a stain that has to be cleaned. I didnt shop for this one. Although I would have this as an option if I was shopping. Low quality would be a problem. I want my stove to last a very long time. But, I dont want to pay a lot of money for it. I have a Whirlpool, glass top (smooth top) built in stove. I dont know the model. It has 4 electric burners, of 2 sizes. It has dials to control the heat amount.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

I have no problem with Conns. My complaint is with Whirlpool for making such a terrible machine with the Cabrio Washer. Its a piece of junk.Fortunately, I bought the extended warranty – which was used many times to replace computer modules and pumps. Now that the warranty is out, once again the machine is doing the same thing. Bad codes, not filling, etc... Some cycles you cant use it at all. The cleaning cycle is never ended (literally). I am debating on having it fixed or just getting another machine.

I feel that at the end of the day I do owe Whirlpool a good feedback. Our top load washer stopped rinsing so I checked the clutch, agitator dogs and coupler which all looked brand new. So I thought Id take the trans apart and after pulling the plastic agitator out I noticed the tub had completely rusted in half! The tub dropped down about an inch. The agitator would spin but the tub just sat there. Now came the difficult part. I told them I was quite sure about my diagnostic that it needed a new tub and told them I could send them a video (I even posted a video on Facebook and Twitter). But they said they would have to send a man out at $180 to make sure! After several days of back and forth conversations, someone at Whirlpool finally saw the video and agreed to send us a new tub. I havent gotten it yet but have heard through the grapevine that these tubs were supposed to be replaced if rusted because of the quality of metal used? So other than pulling a few teeth and needing to replace the tub, our washer has been a pretty good machine.

Whirlpool Upright Freezer Model EV205NXTN01 – The freezer door interior plastic panel bows away from freezer cabinet causing door gasket not to seal. The new gasket doesnt help since the groove of the gasket mounts in bows outward with the interior plastic panel in the door. The freezer is 20 months old now and had the door replaced for the same reason at 10 months old. Now, Whirlpool says sorry it’s out of warranty. Guess they want me to buy a new door every year. I wont be buying Whirlpool products anymore as I dont need another boat anchor.

I purchased an OTH microwave model #WMH1163XVQ-1 around 12/2011 from Lowe’s. Within a year, the paint started peeling inside of the microwave on the bottom. A few weeks ago, I noticed flames in the microwave and realized it wasnt my food but the microwave itself was on fire. Im glad I was close by to immediately turn it off. I hate to think what would have happened otherwise. Does anyone have any idea of what I can do about this? Would this still be under warranty? This is the first and last Whirlpool product Ill be purchasing.

I bought a Whirlpool refrigerator (model number model ised5lvaxwq00) about 14 months ago. The icemaker would not work when delivered. I had it fixed. Several months later, it quit working. It cost $200.00 to have it repaired. The ice door stopped working. I called Alabama Power to repair the icemaker. He advised that it would cost around $300.00 to repair. We are on a fixed income and cannot afford to have it repaired. On investigation, I found hundreds of complaints about the same issue with the icemaker flap. I would appreciate you trying to eliminate this problem.

I ordered this Whirlpool 29 cu.ft. white french door refrigerator online from Goedeckers on April 26, 2013. Delivered May 15, 2013. Ever since we got it, there was a frost buildup in left back of ref. Also ice would fall out of dispenser all by itself. Also a buildup of ice under ice bin. Water would also drip from dispenser. We thought maybe since it was new these problems would go away. But they just got worse. I called Whirlpool & they sent out tech on 8/12/13. He told me Whirlpool has a problem with these refrigerators & would order parts. Well after 3 times of cancelling repairman due to parts on backorder, I told repair I would call when parts come in. I keep calling Whirlpool & keep hearing parts are on backorder, saying parts will be in in 7 days. I call back in 7 days and hear the same lies. Its a shame that they cant get parts in knowing that there is a major problem. It sounds like a real quality control problem. I really pride myself on buying American made but Whirlpool is not helping my case for buying American made. It would be nice if they offered to replace it being they cant seem to find parts.

We bought the Whirlpool Cabrio set from Sears in February 2010, for our second home. We counted up the weeks we have actually been here since then, it is about 10 weeks. We figure we used the washer about three times per week. So, we have gotten about 30 wash loads from this washer and it dies mid-cycle. We assume the motherboard crashed. It kicked the breaker. Lid was locked and we couldnt get it open. The washer would not power up. Repairman arrived three days later, got the latch opened but couldnt figure out what was wrong with it. He said it is probably a board and it might be better for us to replace. He wants to pick it up tomorrow to take to his shop. I called Whirlpool to complain. I know the one year warranty is up but to get 30 uses out of this expensive piece of junk and not get any consideration from the manufacturer is not right. I wish I had seen all these complaints before I bought it. No Whirlpool ever!

This machine does not clean the clothes well, keeps an odor even after using Clorox (probably due to water inside that never leaves), and does not spin the clothes well. Every washing is longer than traditional washers and then I must use the spin-only cycle twice (adding another 30 minutes). I must also shake the inside of the tub to get the spin to work at all. The tech came out and re-calibrated, but to no advantage. Terrible machine and should be, as one viewer said, under recall, in my opinion. NOT WORTH THE MONEY -- and I am very disappointed in Whirlpool.

I bought my Whirlpool washer/gas dryer 13 years ago and up till now I havent had one service call or repair done on either one of them. I have owned a Whirlpool washer/dryer before and I didnt have any problems with them either. When the time comes and I have to buy another set, there is no doubt in my mind that I purchase Whirlpool products again!

Terrible! I bought the washer in December of 2010. We began finding holes in clothes in March of 2011. We found that we had a small crack in our dryer. After trying to fix it ourselves, the crack came back. So, we replaced the dryer. After we replaced the dryer, we began to find more holes in our clothes. It was not the dryer causing the holes, but our duet Whirlpool washer. We had several drain error instances as well. We have had the service repair man out several times for the drain error problem. Ranging from a Mardi Gras bead in the drain pump, to several baby socks to a large adult tube sock. Id say its been at least 7 times.We had finally had enough of our clothes, which I would estimate to be at least $500 worth of clothing, the service repair man said he had never seen anything like it. That was in November of 2011. They said they would replace the tub and drum system but it would take several weeks to get the part in, which took us past our warranty. After numerous complaints, Whirlpool offered the best they could do, that was to extend our warranty (6 additional months). The first drum was broken upon delivery, so another would have to be ordered. There goes another week. Finally it came in. We were all but assured the problem would be fixed.Two days later, same drain error code! 3 more socks caught in the drain pump! Took the socks out myself after watching them do it so I didnt have to call them out again and pay the fee. Next day, there were more holes in clothes! Called and and they said they cant get a service guy out for at least a week! That was all during the Christmas and New Years holidays! January 9th, the service repair man came and said, Yep, its the same problem. We need to replace the tub and drum again. The part would be guaranteed to be in by Friday, January 13th!Guess what? Today I got a call, the parts were on back-order and it wont be until January 24th until they can become available. Seriously? Seriously?! I have a family of 6. Me, my wife, a 8 year old girl, a 7 year old girl, a 5 year old boy and an 18 month old girl. The piles upon piles of laundry are limitless waiting for empty promises.In the meantime, we have had to wash essential clothes (school clothes, socks, underwear, etc.) at laundromats, and friends and other family members houses. Whirlpool doesnt give a care about any of our problems. I come from a huge family, as does my wife. Together, we probably have 100 family members. I will crusade against Whirlpool for any and all appliances if this matter is not fixed and their customer service is not better!

Don’t ever buy Whirlpool smaller (apartment) size front loader washer and dryer - from Home Depot or anywhere else. Beware of rules in warranty plans. I am very dissatisfied with them. I have had several service calls.

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

I absolutely hate this expensive piece of junk. I have tried everything, and my clothes are not clean. It is only myself, and my husband, and our clothes dont get very dirty. I would like to send this junk to the junkyard, but I spent a lot to get the dryer with steam that went with the washer. This experience has soured me on Whirlpool appliances, and now I learn they also make appliances for Maytag!

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

I purchased a stainless steel side by side refrigerator and unbelievably the doorshelves came crashing down - they just cracked in the middle. How cheap can stuff be made, those fridges are not cheap. I thought Whirlpool was a good product - I guess not.

Its just a plain refrigerator. No bells and whistles. It could have more space in the bottom and well as a ice machine or ice maker. Nothing special about it. Just a place to keep food. The light in top could be higher so food does not touch it.

We purchased our washing machine on October 12, 2011 from Lowes. Our washing machine broke on 04/19/12. We have been dealing with Whirlpool and Advanced since 04/23/12, trying to have our machine repaired. Whirlpool sent A&E out on 05/09/12. A repair person from Advanced has been to our home 3 times, and A&E has been to our home twice already. Advanced came to our house on 04/23/12, 05/07/12 and 05/09/12. A&E came to our house on 05/09/12, and again today, 05/11/12.Finally the repair person from A&E said he needed to order parts which are supposed to be shipped to our house. At this point in time we have very little faith that Whirlpool or A&E will do the right thing and repair our machine. We do not understand how a company like Whirlpool keeps getting away with horrible customer service. Whirlpool is the only company we have found where you cannot get in touch with someone who can resolve your problem. Whirlpool told me today that since a repair person is already trying to resolve our problem, we have no choice but to wait until they repair it.

Whirlpool Dryers: I have 2 Duet Dryers and the user interface has gone bad with both several times. I called whirlpool several times to repair. The last time, they refused to repair the dryer. I started having problems with my dryers within the first 6 months of owning them. The repair guy that they sent out the first time said this repair was a major problem with the duets but the company chooses to not acknowledge the problem. They should be required to have a recall. Never by this dryer, you will regret it!

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

If you are in the market for a new refrigerator, STAY AWAY from Whirlpool Top Freezer models. Mine just failed after only 5 years and Whirlpool will NOT do a thing about it, except ask, Did you buy the extended warranty? The compressor in my refrig was made in Mexico by a company called Embraco. I used to work for Whirlpool and these compressors were garbage then, and I guess still are, in my opinion.The 5 year sealed system warranty was removed from these refrig years ago and I can only assume this is why. If you want the 5 year SS warranty, buy a side by side or French door model. Just be sure it doesnt have an Embraco compressor on it! And while I am not a believer in them, planned obsolescence dictates you probably should buy the extended warranty/service plan for such a purchase. Dont rely on positive past experience, even for a company like Whirlpool. Their gold ring of promise emblem is very tarnished for me now.

I purchased a new Whirlpool (2015) Model: WRF736SDAM13 French Door Refrigerator. Two days later, water was dripping from the light in the top of the refrigerator. I was removing about a cup of water twice a day, which dripped from the light. The company was friendly when I called, and offered a replacement or repair. I elected the repair as I felt that would be acceptable. The repair man inspected the refrigerator and determined the problem to be condensation from the water holding tank, located in the top of the refrigerator. He stated that because the incoming water has the opportunity to reach room temperature prior to entering the fridge, and because of the high temperatures (80’s & 90’s) the water holding tank has condensation that collects in the top of the refrigerator, which drips onto the top of inter refrigerator liner, and eventually drips through the light. He stated there is no fix, as it is not broken. While it is not broken, this is a bad design error, which would affect anyone who lives in an area where the temperatures exceed 80 degrees outside, which could only be fixed with a collection tray that would allow the water not to drip into the refrigerator. Currently there is none available. Because I only had the refrigerator for two days before the problem was reported, Lowes allowed me to make an immediate exchange. However, had this been purchased during cooler temperatures, the issue would not have been noticed until after the 30-day time frame and the exchange would not have been an option. When I made the exchange, I noticed that all the 3 & 4 door refrigerators are made the same and will have the same problem. I ended up exchanging it for a Samsung model. Kudos to Lowes. Whirlpool, you need to find a fix for this problem if you want to sell me another one.

I do not know if my mail would be read or not, but I am writing it just to my satisfaction. I am a doctor (dentist) living in Haridwar. I had bought a Whirlpool fridge around 2-3 years back. I am not sure about the date. I have the bill. I will have to check the exact date. So around 3 months back, the fridge stopped cooling and I lodged a complaint in your customer care center. The engineer turned up, and he said that the compressor was not working and the company will change it. We only have to pay for the gas to be refilled. I said ok. Everything went well for nearly 3 months, then again one fine day, the cooling stopped. I called the companys customer care, and they gave me a complaint number and customer satisfaction number. But nobody turned up for 2 days. I called and called, then after much calling, a guy from the company came and said that the compressor was not working and they have to change it but that it will not be possible for 4 days. After 4 days, he will come.Sir, can you live without a fridge for 4 days and not getting the guarantee that it will be ok in the next 4 days? So, I went to the market bought a Kirloskar compressor, got it fixed, and got the gas filled; and the fridge is working fine now on the same day. This cost me nearly 4500rs, but I am happy that I have solved the problem. Till date, nobody has come to see my problem; and to my utter surprise, I received an SMS from Whirlpool that the customer is not willing to pay. Ha ha ha. My fridge is a double-door 280-liter fridge. What should I do?

I could echo all of these complaints and more. I just gave up on the heater, junked it, and went to Home Depot and bought a Rheem. Recommendation: NEVER BUY A WHIRLPOOL!

Whirlpool Double wall-mounted Oven model#WOD51EC7AW05. Have had nothing but problems (at least 7 problems). The 1st one is a potential fire hazard. Porcelain/enamel shattered on bottom interior panel of BOTH ovens in less than 60 days (exposing underlying metal to rust). Cracked in an odd stress-pattern that indicates the metal expanded during heating, and the porcelain finish did not tolerate the expansion. The lower oven had only been used 2X before I noticed the fracture pattern. Obviously faulty design; a manufacturers defect. Whirlpool claims it is cosmetic damage and when porcelain eventually flakes off, they will send me touch-up paint. (If I dent the outside of an appliance with my wheelchair, thats cosmetic damage. Its a manufacturers defect if the damage happens during normal operation. The appliance damaged itself, not the user.)The preheat function does not work on either oven. The oven indicates it is 350-degrees, when it is actually 125-degrees. Repairman says this is normal; ignore the indicator and navigate by store-bought thermometers”. The temperature can vary 50 degrees on either side of the actual setting (thats a 100 degree range!). Between the faulty preheat and the wide range in temperature, it makes it very hard to bake bread or cake.The rest are annoying problems: The timer is a single “beep” (not even very loud), followed by another single beep every minute. This is not much help if you are folding laundry while the cookies bake. The windows have so many dots on them theyre not clear enough to see how the food is cooking (or read the store-bought thermometers) without opening the doors. The oven produces a lot of steam that fogs up the windows (Ive never had this happen, and Im past the half century point). The exhaust fan is loud and it blows hot air into the drawer under the oven (another potential fire hazard). Dont buy this oven. It has several design flaws and Whirlpool does not stand behind their product.

I bought my Whirlpool induction stove several years ago. We normally use a toaster oven for baking as we are only 2 in our home. Last year I decided to cook a large turkey for the family. I threw the turkey into the oven and started cooking it. After an hour or so I decided to start cooking the potatoes etc on the stovetop portion. My potatoes started cooking and my element shut down. I did everything I could to get it going but finally resorted to the manual to see if there was a suggestion. The suggestion was that the oven had heated the burners too high and that I had to shut off the burners and wait for 5 minutes and try again to use them. The oven was only cooking at 300F. I waited 15 mins to get it running again. The stovetop went out once again and I had to stop cooking. Conversely Ive had the same issue with the oven. Ive been cooking in the oven and have had it shut down as a way to address the stovetop being too hot. How am I suppose to cook on this unit with any kind of confidence? I did an online chat with a rep today and they suggested getting a technician over to the house. I was told I could pay $129 to have them look at it. This is obviously a design flaw that I was never told about prior to my purchase and would never have bought had I known. Shame on Whirlpool!

Second time in 3 years our freezer/fridge has gone out. Same symptoms as last time, which was a bad motor. Repaired BY WHIRLPOOL. Completely useless. I don’t expect to have to replace a refrigerator every three years. Especially when I paid $$$$ for it to begin with. DO NOT BUY!! We will be switching brands. And as the installed items in our house start to go (yeah, they’ve already had to service an oven installed at the same time 3 years ago too) they too will be replaced with other brands. You’ve lost a lifetime customer! Shame on you Whirlpool.

Whirlpool Clothes Washer Model WTW4930XW1 - We have experienced tub overfilling on (2) separate occasions with this washer model in a period of time of less than (2) years. Through extended warranty service purchased, a technician came out the first time; declared nothing explainable to cause the malfunction, re-calibrated the control panel, and off he went. This second event occurred much the same as the first; happened to walk in to notice water on laundry room floor and witnessed overflow out the lid on top. We have carefully washed additional loads after this second event without a similar malfunction. From my online research, this sure sounds like a faulty pressure switch not sensing high water level in the tub. Any other thoughts?

I bought three top of the line 40-gallon Whirlpool electric water heaters from Lowes three years ago. One of the three heaters has already developed a leak. I contacted Whirlpool only to find out that they wont do anything to diagnose the problem. I have to pay labor for someone to come out, diagnose the problem and then pay for the labor to either correct the problem or replace the water heater. By the time I pay the labor costs, I could almost buy a brand new unit.

I bought a Whirlpool water heater 5 years ago and after one year I had to replace the thermocouple every 3 months. Each time I call to complain, they would just send me a new thermocouple. I asked them several times to replace the item and they refused and just continued to send me replacement parts and refuse to honor their warranty. The water heater had some type of defect, but they still refuse to replace the item and did admit on the phone they have records of several parts that they sent.

When renovating my kitchen I went with all Whirlpool appliance. I have nothing but trouble with my fridge. About a year old we had to replace the motherboard at our expense. After having that done, about 6 months later I had to defrost it so it would work again. Now it has to be done every month. All they say we can book another service call at my expense again. All I say thank goodness I kept my old Frigidaire. It saved me more than once. So my advice is stay away from Whirlpool. They dont stand behind their products from my experience.

I have always used Whirlpool products and have grown up with them. From washing machines to dishwashers. Not only is it made in the USA but its reliable. The only problem is space and it can do with more freezer space. Other than that its a great refrigerator.

I purchased this washer 4.5 years ago. I have always been a Whirlpool customer. My parents had Whirlpool washer and dryer while I was growing up in the 60s. When I got married in 1976 I bought a Whirlpool washer, dryer and refrigerator. They lasted 19 years!!! Then I replaced all 3 in 1995. Again, lasted 16 years. I gave the washer and dryer to my sons when they moved out--its still working.So I thought I would reward myself with a new Whirlpool washer and dryer in August 2011. I didnt know about the pitfalls with the high efficiency washers. The dryer is great, but I HATE my washer! The lid lock is ridiculous, we should be given an option to override it. The sensing takes forever. The low water level leaves clothes unclean, and with detergent residue, causing the need for another rinse cycle. This saves no water if you have to run it twice. Not to mention how long it takes to do a load. Then it doesnt spin all the water out and you have to run a spin cycle. It aggravates me every time I do laundry. After being a Whirlpool customer for over 35 years, its time to move on. I just ordered a GE machine that is old school, no sensors, no lid lock, and I can control the level of water. Whirlpool doesnt make these simple machines anymore. Youre going to lose a lot of customers if you keep selling the trash. This is the worse washer I have ever had. My adult son went into a rage last night trying to use it, he forced the lid open and broke the lock, and of course it wont work at all without the lock. Good thing I ordered the GE washer the day before, it will be here in a few days. Cant wait to bash the Whirlpool with a sledge hammer, it will give us great satisfaction! Are you listening Whirlpool? Your designers need to go back to the drawing board. I realize this is not just a Whirlpool problem. Ive seen complaints about kenmore and every other manufacturer that makes these stupid low water sensing machines with lock lids. If consumers are too stupid to keep their kids out of the washing machine, maybe they should have their kids taken away.

My father and I both got the Whirlpool Gold gas furnace 3 seasons ago. I can't tell you how happy we both are! Our heating bills plummeted; the unit is quiet and does a fantastic job. I am 50 and I have to admit this is in the top 5 of the best purchases I ever made. For me to take the time to find a place to write a review 3 years later should be testament to how happy I am. Make sure you have it professionally installed! Don't skimp here…this is the key!

I am so disappointed, angry and tired! Unfortunately, I listened to the salesperson regarding this feature and bought it hook, line and sinker! The Aqualift self clean system is a joke! It only cleans the bottom of the oven and that is after you mop up the water left in the bottom and scrub it. No amount of scrubbing even touches the sides, back or window, even after using the Aqualift feature 3 times! I spent hundreds of dollars only to be down on my hands and knees scrubbing to no avail. I have not seen 1 good review regarding this system. Shame on me for believing a salesperson and shame on me for not researching first. I will not make this mistake again!

I bought the WP Cabrio washer on 10-18-16 from Lowes. It does not wash well, my dark clothing came out with white spots all over them even after I rewashed them x 3 and the lighter clothing you dont see the spots so you are wearing dirty clothes. Also, it is making a lot of noises while running. WP should pull this model off the market.

KitchenAid double oven glass exploded during the self-clean cycle. The oven was purchased on 9-20-11 and the glass exploded on 11-30-11 during the first-use of the self-cleaning cycle. The cavity was damaged with dents and shards of glass from the explosion. Unfortunately, the warranty for KitchenAid is replacement of parts and repair only. Nicole, supervisor at Whirlpool, offered to extend the warranty 6 months. Then I was somehow disconnected from the call.

Great washing machine. I have been using for over 2 years and this washing machine has NEVER failed me. Clothes from extreme filth to sensitive material always come out clean, not damage, and smelling great. I would highly recommend Whirlpool washing and drying machines to anyone!!

The latch on the attached-to-the-door silverware basket on our Whirlpool GU3600XTVQ3 dishwasher has broken three times since the unit was installed in July 2011. This last time, the technician brought a new one and it broke the next day. I cannot understand why a company with a supposedly good reputation would include an accessory with such a faulty design, made of such flimsy materials. We have the basket wired shut again and have to call the repair place, but I have no confidence that anything the technician brings to us will work any better, since its the same stupid design and shoddy workmanship.

Bought Whirlpool French door refrigerator. Unit was defective when delivered and I told them so. That was on 06/14/2013. Unit got progressively worse and finally has quit completely. At Whirlpools suggestion we bought a Whirlpool Repair Plan Plus One (another scam) for $300. Repairman came out and told us the refrigerator couldnt be fixed. Now Whirlpool suggests their only option is for us to buy a discounted model. This refrigerator went from bad to not working at all in less than a year and a half. Anyone that buys a Whirlpool appliance with knowledge of how they treat customers and back their products has to be a little crazy.

One month after the delivery/installation of this new refrigerator, it began making loud noises when cooling the top refrigeration unit. After the 4th service call and replacement parts, the noise ceased for 3 months. The noise has returned and Im now scheduling the 5th service call for the same problem. Thank goodness I purchased the extended protection plan through Lowe’s when I bought my three new Whirlpool kitchen appliances. Whirlpool used to be known for quality and dependable appliances. That no longer is true. SAD.

March 18, 2018. I was called today to inform me that the right front burner on my new stove Model # WEG745H0FS0 (ordered in early September and not delivered until mid-October from Menards) was not operating properly. The flame was noisy and yellow. I inspected it and found that the front burner base was substantially damaged by heat. See photo (Whirlpool stove part damage1). On inspection of the other front burner base, I discovered early signs of the same problem. (Note changes on burner base on the left of the photo.)In this photo (Whirlpool stove part damage2.JPG), you can see the damage to the burner base and also see some changes on the 3 to 5 O’clock position on the burner base on the left of the photo. This stove is less than 6 months old. The fact that the burner parts can be melted indicate poor design and danger to the owner/operator of the stove. Further, the operators manual for the stove I bought does not include any information on the model I have. It has pictures of the range top similar to mine but the model number is completely different. In addition to this, the Aqua-Lift Technology for cleaning the oven is completely ineffective. This is noted in several other reviews of this equipment. The problem noted by the other review became obvious the very first day I tried to use this range. A 2 cup pot spilled all over the cooktop as soon as I put it on the grate.

We bought a brand new basic refrigerator, freezer on top, no frills, no ice maker, no water dispenser (model #WRT359SFYB) in Dec. 2011. For months, things on the bottom shelf of the fridge would freeze. The more we turn the control dial down, the more things would freeze. Finally, everything stopped freezing, including everything in the freezer. After having to throw everything out, we called for service. One year and 4 months out from our purchase date and without an extended warranty, we were offered no help. The repairman said that we had a leak as a result of poor manufacturing and there was no refrigerant left. He filled it but said he needed to check with Whirlpool to see if they would cover the repairs. It turns out they wont. I called them myself and spoke with a manager who offered no options at all, other than paying more than the price of the fridge to have it repaired. I asked if they were okay with their product having such a short life, filling landfills and causing such problems for their customers to which she replied that they are man-made and have no life expectancy. Crazy! For a manufacturer of large, costly appliances, one would think they would stand behind their product more. She also said that she would file my complaint and would have let me know if there was a recall on the fridge or any of its parts. It appears to me that others have had similar complaints. I wonder what warrants a recall. I will never buy Whirlpool again.

I just bought a new home, and it came with what was described as top of the line Whirlpool appliances. The Cabrio toploading washer worked for two loads then just stopped. After arguing with Customer Service for a while (They insisted this must be an installation error.), I talked with the builders. They gave me a different customer service number. My second call got me a repair appointment, during which the repairman discovered that the pump was in fact dead. Because this is a new model, they didnt have a replacement on hand. So, I will have to wait an additional week and a half before the part is installed. This is a product that retails for around $1000, and it lasted less than one day. My last washer cost $400 and was still running fine when I sold it after 10 years. I can already see the handwriting on the wall. After my warranty is up, I will have to replace this hunk of junk with something that has some reliability.

Whirlpool Cabrio 8kg washing machine - Purchased this washing machine because of the size, water efficiency, no agitator. Have purchased Whirlpool products before and havent had a problem but this washing machine is absolutely a piece of garbage. At first our water bill was hugely excessive so tested the machine and it was using 269 litres per wash when it was only supposed to use 98 litre as stated on the machine. When doing 2 washes a day you can imagine the water bill we had. Lint on washing, continually out of balance no matter how much was in the wash. Had it fixed under warranty then just out of warranty. Water wouldnt turn off. Had to turn it on and off at the top lid. Could now be opened during washing cycle. Started turning itself on in the middle of the night and day. Had to unplug it to stop it, wont spin out clothes. Still sodden. After cycle finished with the lid open it would start to fill up with water again and going out of balance again. Had the appliance people out for the 4th time. Had to have the motherboard and a valve replaced. Its still leaving lint. Washing is not even getting wet so it cant possibly be cleaned. Contacted warranty people. They came out and said it is running as it should be but they advised us this is a common problem with this brand of washing machine. Personally I wish I could throw it away if I had another $900 to waste on another machine.

I purchased Whirlpool front load washing machine (Sport 1072 CB) in March 2013 and since then it has been my worst nightmare. Buying a Whirlpool washing machine was one of the worst decisions I took. The problems started to come from the first month itself. Many parts have changed and are still being done. I am continuously requesting them to replace the machine but they have decided not to listen. The after sale service of Whirlpool is the worst in the industry.

This is a portable I purchased from an extended family member. She got it new from Sears a couple yrs ago. I do not have a built in dishwasher and needed one to help when others were here. It works great.

I recently renovated my kitchen and was so excited to have a new range. Loved the looks of this one so I bought it. I’ve had it a little over a year now, and am so disappointed. The “stainless” trim around the knob area is peeling and the AquaLift self-clean DOES NOT WORK! After the AquaLift cycle, there was a watery mess in the bottom of the oven which was difficult to clean up. It would have been better if I had cleaned it the conventional way. I’m not sure what to do at this point. The area where the trim peeled off looks awful and is very noticeable. Take my advice and do not buy!

We bought this washer brand new and as soon as it was outside the one year warranty the bearing went out. They had to order a whole new drum kit. A MONTH later I had a running washing machine again. The day after it was fixed it started leaking underneath the machine. Serviceman came and looked at it and said No must be the hoses (my responsibility to fix). Nope kept leaking and two months later Im doing laundry and an entire load of water floods my laundry room. Drum broke again!! SIX WEEKS LATER I still am waiting for a new drum. I had to fight to get Whirlpool to fix it again and they wont even return my calls about why its taking so long! We are a family of 8, so doing laundry at a laundromat is outrageous! Dont ever buy Whirlpool washers!!!

We have a Whirlpool Refrigerator, Model # ED5HHEXTQ00. And every shelf has cracked, the water and ice dispensing levers have broken off. Now our produce trays are broken as well. I do not recommend Whirlpool products to anyone. They will not stand behind their product! There is obviously a problem with the plastic used on the shelves and trays. I have read of others complaining of the same issues!Whirlpool! You need to step up to the plate and recall these shelves, and replace them for your customers!

I purchased a high dollar built in side by side fridge with custom panels in 4/2005 and had my first service call in 5/2005. Since 2005 we have had 11 service call mostly for defrost failures and over temp. readings. From 2011-11/20/2013 we were issue free then the fridge over temp alarm sounded and we could not hear the fan motor. We had the certified tech come out to evaluate and found that the main control board needed to be replaced. Kitchen Aid/Whirlpool no longer make this item and forwarded us to Core Centric solutions to have a new one built. After speaking with the certified tech who had been out to service our fridge 11 times he informed us that these boards in his experience have never lasted more than a year. We spoke with a customer service rep a Kitchen Aid and asked about a prorated discount on a new built in fridge and she said it seemed reasonable but after checking for authorization informed me I needed to have the board rebuilt at my own cost and that even though this typically takes about 4 weeks to build the fact that our family would be without a fridge is not Kitchen Aids problem. 6/20/2005-over temp/not cooling call (replaced defrost thermostat) 9/2005-over temp/freezer iced over in bottom (freezer decided and drain unclogged) 10/05-over temp/not cooling (replaced fan motor) 9/06-over temp/freezer iced over in bottom (drain line decided, kitchen aid had no advice on how to fix) 10/06-over temp/not cooling, ice build up (whirlpool recommended replace heat kit and bimetal) 11/7-over temp and ice buildup in freezer with leakage (adj to drain pump and defrost drain basin made) 11/07- over temp and freezer icing over (whirlpool sent out a new heater probe) 6/08-over temp and ice buildup (bimetal and foam block replaced) 10/09-over temp, lights and motor shutting on and off (replaced defective board) 10/09- fan making excessive noise (ice buildup found on evaporator fan)11/13-over temp ice buildup in freezer, burning smell from fridge and no air movement or cooling in either compartment (need board rebuilt as on 10/09)Board no longer available from whirlpool, must be custom built at owners expense and will take up to 4 weeks. D/t continuing issues and whirlpool not willing to help the customer with replacement I would highly suggest no one buy a Kitchen Aid fridge.

I have used Whirlpool products for over 30 yrs. This is the worst made product I have ever purchased. The ice maker doesnt produce very much ice. The cold water on door isnt cold. There is too much wasted space in freezer and refrig. side. You cannot get anyone to call you back to call for help. I contacted Whirlpool over a month ago. No return call yet. Consumers beware!! Model no. WSF26C3EXF01.

I will make this short. If there was a part that could break on my Whirlpool fridge, it broke. Whirlpools 3rd party repair company (Flamingo Appliance Services, who are awful themselves) was at my home countless times. This last time, they were replacing the same malfunctioning part for the THIRD TIME. The Flamingo technician (Nicholas) insured me that the issues were not related, despite the same exact part being replaced 3 times. I told him that I believed that was a dishonest statement, and he left the fridge un-repaired. Now Whirlpool nor Flamingo will help, and I am stuck with a non-functional fridge, and small children at home. Whirlpool and Flamingo represent everything I despise, have zero integrity, and are a reading on the barometer of where our country is headed.

My husband and I purchased a Whirlpool French-door Refrigerator in Feb. 2014 from Best Buy. We did not purchase a warranty through them (BIG MISTAKE) because everything we heard about Whirlpool was positive, at least through friends and family. 1 year and 6 months later we have NO freezer and their warranty expires a year after purchase date! I called the company and they are no help at all! From all the comments I have read on here, there are few positive results! From now on I will be checking all reviews before I purchase a product again and WILL NEVER buy another whirlpool product again!

My two year old Whirlpool refrigerator died. The compressor went bad. $859 to replace it. I only paid $999 for the fridge. This was crazy. Two years old. Heard it was not uncommon and the technician said most refrigerators warranty the compressor for up to 5 years but not Whirlpool. Had to go buy a new refrigerator.

We purchased a Whirlpool Cabrio Washer (Mod #WTW7300XW1) and Dryer in 2011. Ever since we have had the washer it has eaten clothing, towels, sheets etc. It now has a main bearing that is so noisy that we have to close the door to the laundry room to be able to hear in the rest of the house. Also the sealed tank around the drum is now leaking. We invested close to $1000.00 in this washer and in my opinion it is a piece of junk. The washer repairman told me that he has had 3 (three) other Cabrios with the same problem in the last month, but Whirlpool says that there is nothing they can do as they have had no issues with this problem. Last Whirlpool product that I will buy.

I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

Whirlpool gold series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two up front is way too hot for regular cooking, even on lowest setting; oven cuts out while cooking -- unexplainable how this happens but you really have to watch the oven while cooking to make sure its still on. Pros: large oven so you can cook ginormous turkeys or prime ribs.

Talked to tech & checked the manual for testing the thermocouple on my natural gas water heater. Everything checked out fine but pilot wouldnt stay lit. Tested thermal switch.... everything. They said replace the valve/thermostat. Still no dice. Turns out the thermocouple was cracked on the inside near the burner assembly & would give passing readings on the voltmeter 9 out of 10 times. If you have any pilot problems, replace the thermocouple first. Was only 10 bucks. I keep a spare now. Dont forget to vacuum any dust from the fine mesh screen on the very bottom. Fresh air supply.

I love the convection cook top! It is very responsive. Its about as responsive as gas, which saves a significant amount of electricity! But, it is WAY easier to keep clean. I also love the warming burner! Having that 5th burner in which to keep something warm, while you finish other things in the oven or on one of the regular burners is very helpful. Its also great for melting butter. The ability of the oven to delay the start of cooking and program cooking to finish at a certain time or in a certain amount of time is also very useful when you cant attend to starting or stopping cooking in the oven.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

We purchased the Whirlpool Duet (front loader) washer and dryer in 2005 from Best Buy. We had many problems with the washer leaking around the front door. After several visits, Best Buy (in 2007) said we could pick out a new washer. We picked out the Whirlpool Cabrio. About 2 years later the mother board had to be replaced on the Cabrio. We are constantly getting F codes and have to unplug the washer several times for it to reset. It also sounds like a plane getting ready to take off and from what I read that repair is very costly. It has been leaking as well. I contacted Whirlpool today and they informed me that there was no recall on the machine and when I told them that there were many complaints for the same issues online, they said they do not base their recalls on blogs and to fix the problem, I would have to incur the cost. This machine is the biggest piece of junk that I have ever owned. I will be sure not purchase a Whirlpool in the future!

Hello, Here is our story. We bought this refrigerator Whirlpool - 26.2 Cu. Ft. 4-Door French Door Refrigerator through a local reputable retailer. After 16 months we started to have problems with ice melting in the ice bin. We continued to have problems related to cooling/freezing within the refrigerator to the point where almost all the major parts were replaced. The good news is the dealer negotiated with Whirlpool to have all repair costs covered after the first visit. I asked about just getting us a new refrigerator and was told Whirlpool requires a part to be replaced 3 (THREE) TIMES before consideration.In summary, the refrigerator could not be fixed and was condemned in agreement with both Whirlpool and the Dealer. Here is the interesting news - since the refrigerator was out of warranty (12 months and now we are at 18 months), they are requiring we pay $600+ for the replacement. Buyer beware - either pay for the extended warranty or risk having to be inconvenienced by having your refrigerator unavailable for days or in our case, weeks!

I purchased a washer from Whirlpool through Home Depot on August 7, 2014 and on Dec 31st, 2014 the washer broke. I called Home Depot and was told to call Whirlpool since I was still under a year warranty. After numerous calls I was referred to Advantage |Appliances, a company that provides repair services for Whirlpool. After a week the technician showed up and briefly inspects the machine to conclude that there were two problems with the machine: The controller is defective and there might be another problem since the water is not draining. An order was placed for the part and another week went by with still no part. I called the corporate office only to hear that it might take 5 to 7 days to receive it. In the meantime I had laundry piling up. I was forced to go to the laundromat with one arm in a cast and a painful lower back. I finally received the part on Friday and the technician arrived on Saturday to install the part and then announces that she was willing to fix the water pump but had to get paid in cash since this was not included in the warranty. Now mind you! This woman knew about the problem from her last visit but made believe that it wasnt a problem. Advantage Appliance makes money by extorting their customers out of money. This young lady stood there without blinking asking me to pay her $89.50 to do the job she was suppose to do in the first place. I purchased an extended warranty from Home Depot only to find out that they would not be able to do anything since I was still under warranty. I have never been so angry and want Whirlpool to take responsibility. I am sitting with a washer half full with water and no one is stepping up to do something! Whirlpool is disgusting! The corporate office was not friendly or nice about this situation. They dont care! Why do businesses like Whirlpool get away with this? This is not acceptable.

I bought model #W4TXNWFWQ at Lowes in February 2013. It had a one-year warranty. Five months after the warranty expired, the defrost timer went out. It cost $100 to fix the $400 refrigerator. Planned obsolescence or coincidence? Either way, its poor quality.

My Gold Series Whirlpool Electric Range is 3 years old. The main board for driving the burners, oven, etc burned up which caused my oven to go from the 200 degree setting to 450 in about 3 minutes burning everything that was in the oven. They want $400.00 + installation to replace it and that is if one can be found to actually install. The stove was purchased for $850.00 because of the Brand and now they want half that value to replace a board that will likely fry again in a year or two. I find there is no value for money and will not ever buy a Whirlpool brand again.

If you like having to use a funnel to refill plastic water bottles, and enjoy ice splashed all over your kitchen floor then the Whirlpool Gold refrigerator is the model for you. The problem with ice is if you dont have your glass sealed up to the ice dispenser it will shoot ice out over the top of the glass, and even if you DO do that when you try to remove your glass to cut off the ice supply it continues to disperse ice everywhere. TIP: The only way to more efficiently stop ice from spraying all over your wood floor is to do this: When your glass is full of ice, simply open a door on the refrigerator. That IMMEDIATELY stops the flow of ice OR water. Works great, and its the only way to deal with this horrid design flaw in this product....

I bought a Cabrio washer in late 2015. All Ive had is trouble with this joke of a product. After three years it wont do any cycle, the people at Whirlpool dont care. Please dont buy any Whirlpool product.