I have a Whirlpool dryer for about 8 years. The lint catcher has some holes so I called the 1800 phone no. that I got from the dryer and order the part. That happened in May 18 - I pay for it. I have been told that I will receive the part in 5-7 days. Today, Aug. 27, I called see what really happen with my part. Well I have been transferred from a department to another. I waited over an hour on the phone. No employee can find my order in the system and hey keep on telling me that I did not order! In the end, the order have been found. They told me that the part has been in the back order and I will receive it on 9/12/2014 - 3 weeks away adding up to 4 mo since I order and my credit card was charged. I cancelled the order> I really do not want to deal with Whirlpool ever again. I am happy to pay for a new dryer - some other brand and put in the garbage the Whirlpool - for a lint catcher and bad customer service.

I just bought a Whirlpool 50-gallon water heater from Lowes because my old one took a turn for the worse. I brought it home, installed it just as the directions said, and immediately got an FVS fault detected code as soon as I plugged it in and tried to ignite it. This is by far the worst experience I have ever had with an appliance. And wouldnt you know it whirlpool service center is closed on weekends. What an absolute piece of trash. Im draining it and taking it back ASAP. Lowes and Whirlpool just lost my business for good.

I purchased a Top load Whirlpool washing machine, replacing my old Whirlpool. I am so unhappy with this new one. I noticed that the water level are low...I had the tech here twice and they said that if here isnt any lights on the dash that the machine is working. I called the head tech, same answer. When I put the clothes in the washer I make sure that the clothes are evenly placed in the tub. The clothes comes out tangled and some not clean. Tonight I noticed that a pair of pant at the bottom of the load had white smudges/ I am so unhappy with this piece of junk/ I cant afford to buy another washer, so I am stuck with this.. I have tried all the different controls, still bad. I know the new machine are different than the old ones. I still believe that the water levels controls are not working. I have used my sister new washers and the clothes are not tangled and they are all clean.

I have made a conscious choice to remove baked food from my diet back in early 2013. That has not stopped my wife from pursuing her passion for baking from time to time. It goes without saying that baking requires a well functioning baking oven. The one that came with our home was a Whirlpool Wall Oven/Microwave combination. Sometime in early 2014 the Oven broke down. I had no choice but to replace the combination. After doing some online research and a couple of trips to stores like Sears, Home Depot and Lowes, we decided to drop $2700 of our hard earned dollars on a brand new Whirlpool WOC95EC0AS wall oven microwave combo to replace the old one. Lowes sent someone home to take measurement to make sure that we ordered the right size for the slot in our kitchen. 2 weeks after the purchase, around March 27th or 28th, we had the Microwave/oven combo installed in our kitchen by some Lowes provided installation contractor. After installing the appliance, the technician demoed both the microwave and the oven part of the combo. Everything looked good and we were happy to see the shiny new appliance adorning our kitchen. Little did we know then that this would start a seemingly unending horror story. For the first 3-4 weeks we used only the microwave and it worked as expected. Then one weekend, my wife decided to do some baking. The dough was prepared meticulously and then came the first surprise, the oven refused to turn on. Feature not available - the message scrolled across the LED display. And horror of horrors, the microwave started giving the same message immediately after. We looked online for solutions, and we found one that suggested that we try breaking the circuit for 1 minute and turn on again we tried it to no avail. And now we went from having a working microwave/broken oven to no microwave/no oven.We waited till the next day or so before placing a call to the customer service number provided in our warranty receipt. By now the 30 day return guarantee had expired and it was the end of April, 2014. Product was now under manufacturers warranty. Whirlpool/Lowes customer service scheduled a technician to come take a look at the oven.My wife took a day off from work and waited for the technician. The technician from J&H appliance repair of SJ came home, took a look and then tried breaking the circuit and turning it on again after a minute; of course, it did not work. After consulting with someone on the phone, he decided to order some parts the main circuit board. He promised to come back after the part arrived. We did receive a call from J&H to schedule an appointment to install the part and schedule a time we did. J&H decided to no-show us on the appointment and my wife wasted another day of her time-off from work.We called customer-service again and this time they decided to send in a technician from a Sears owned company called A&E Factory Service. A technician came home and he went through the same steps as the earlier technician from J&H. This time, it was my turn to stay home and welcome the visitor. Finally when there was no trick up his sleeves to left to try, he decided he is going to order the main board. A&E technician did something different, he ordered the part to my home. I called him as soon as it arrived. We scheduled a time and he arrived to install the part. I stayed home again. Well, result was no different and the appliance was in no mood to oblige to our coaxing and cajoling. Feature not available, it continued to bleep out. He ordered 2 more boards to my home. I stayed home again to welcome the technician and he arrived again to install the 2 new boards but the result was no different than the last time. Feature not available - the zombie appliance screamed. He told me that there is only one that remains to be done which is to replace the front panel circuitry so he ordered it. By now it was end of June. We hadnt used the oven for 3 full months and the microwave for 2 months.First week of July, a new technician from A&E showed up early in the morning to install the newly ordered front panel. Surprise, Surprise - Feature not available screamed the shiny lemon sitting in my kitchen wall. The technician asked me if I will be home the whole day and I said yes. Another technician, a supposedly senior expert came by that afternoon. He tinkered with it for a couple of hours and like all who came before him, he surrendered. He said there is nothing left to do with the oven and that he is going to recommend that the oven be replaced.He left me a voice mail next morning saying that I need to call Whirlpool myself and apprise them of my experience and ask for a replacement. So I called the customer service after a long 1 hour talk with customer service rep, followed by a conversation with his rude supervisor. I was told that Whirlpool no longer deals with A&E that they broke their relationship with them as of June 31st, 2014. I failed to understand why that was my fault. I was told they need to send technician from another company, can you guess the company whirlpool recommended? It would be funny, if it wasnt incredibly painful to deal with horrible customer support representatives yes, it was the the no-show company J&H. I told him Id have nothing to do with J&H. So they recommended their only other option, a company called AGO.AGO technicians started showing up at my house since early July and I waited with baited breath for them to suggest a way forward to a resolution. Well good thing that I didnt hold my breath for that to happen. AGO technicians have made 8-9 visits to my home during July and August with the last visit being on Aug 20th. They replaced all the boards that A&E guys had already replaced the previous month. On August 21st, I received a call from AGO rep saying that they have given up that the product is irreparable. They gave me a reference number and asked me to call Whirlpool for a final resolution.I called Whirlpool customer service on August 22, 2014 and Spoke to Jennifer and her supervisor for 32 minutes. They wanted to restart the whole process of sending technicians to my home. It would be funny if they hadnt stolen $2700 of my hard earned money + all the lost hours and productivity + vacation time lost + headache they caused + the pain of not having a working Oven/Microwave in our kitchen + dealing with rude customer service reps, I lost it. I threatened to put the whole recorded conversation on YouTube. The rude inconsiderate supervisor hung up on me.I called back after a few minutes and spoke with a tad bit more reasonable rep named Ashley. At least, she had the patience to hear me out without barking at me about what my rights are as a customer. Well she had no better solution than to suggest another technician appointment what was the excuse this time? That the last technician from AGO didnt call Whirlpools tech support line while he was at my house. As if that is my fault. I agreed and we setup an appointment for Wednesday, August 27, 2014 between 8AM and 12PM with the same old company J&H who no showed me once. Goes to show you who Whirlpools associates in business are. They had only two companies providing repair services in San Jose AGO and J&H.I took the morning off from work on Aug 27, 2014 and waited till 12 noon and there was no sign of technician. So I called Whirlpool customer service number one more time. As you would expect by now, a rude customer service person named Eva from Michigan picked up my call. It was reasonably clear to me during that conversation that the J&H technician no-showed because appointment was not communicated to them. She emphatically claimed that my warranty is not a product replacement warranty but a repair warranty and that she needs to send me a technician to take a look at the product. Can anyone believe it? She told me I have only one option either to accept the perpetual technician visits or she will note that I have rejected their offer to service the product. I told her I am not rejecting anything, just exploring all my options. She assured me I had no other options. The arrogance of these people! So here I am, several thousand of my hard earned money stolen by Whirlpool and I still have no working product. Adding insult to injury, 2 weeks ago I received a letter from Whirlpool pitching me to extend my 3 year extended warranty to 5 years. They want to inflict more pain and charge you for the privilege.I have more options than Eva would want me to know. Luckily I have legal coverage under my benefit plans at work. Even more importantly there is social media and internet. I am pursuing those options at the moment. Heres the summary: Lowes takes my $2700 on March 13th. I get the Wall Oven delivered and installed on March 27th. A total of at least 15 repair visits are made to my home between first week of March May and August 21 (I have started losing count). Time since product purchase: > 5 months. # of times the oven has worked : 0. Hours spent talking to rude customer service reps: 4-6 hours. Time spent at home baby sitting repair technicians : > 100 hours. Lowes, Inc washed their hand stating 30 day money back guarantee is over. Its customer service people were not of any help either. UPDATE 9/15/14:Within a few hours of publishing this post (on 9/2/14), I was contacted by both Lowes and Whirlpool via Twitter. Both the companies seemed genuinely interested in resolving this issue. After I DMed my appliance and contact information via twitter, Melissa from Whirlpool called me and left me a voice mail on Wednesday, Sept 3rd, 2014 informing that they have decided to replace the oven. I was told in that voice mail that I should expect a call from Whirlpool on the details of the exchange before end of day on Friday (Sept 5th). I was contacted by Lowes and I informed the Lowes rep that Whirlpool has agreed to replace my oven.I thought I would really be able to make a single update to the post informing the world that Whirlpool really made amends and tried to hard to correct the failures of the past. It is 9/15/14 today and I havent received any updates from Whirlpool about the how/when of the exchange. I made 2 customer service calls to Whirlpool last week. I was unable to speak to Melissa the first time, but did speak with another rep. She told me she will pass the information on to Melissa and ask her to contact me. She connected me to Melissas voice mail and I left her a voice mail. Melissas voice mail greetings suggested that I also contact her via Whirlpools customer service email for faster response. So I did that too.On Thursday 12:37PM pacific, I received a call from Melissa. She had no useful information to share with me. She is waiting for some paper pusher to do his/her job and could not make any promises as to when it will be resolved. My file is stuck in one of Whirlpools many bureaucratic bottlenecks. This is no personal indictment of Melissa it is just evidence that Whirlpools is not serious about customer satisfaction. My experience is not isolated as evidenced not just by this event but also by the number of people ranting on their social media handles. Here was an opportunity to rectify its mistake and win the confidence of a customer back and so far Whirlpool seems to be uninterested in any such thing.IMPORTANT UPDATE (9/16/14): Please share this story via your social media handles. It is important to hold these people accountable for their actions. It is also important that we inform consumer about the perils of doing business with these organizations. Thank you very much. UPDATE (9/17/14): Whirlpools customer supports twitter moniker is @WhirlpoolCare. LOL. They could have demonstrated care by resolving customer issues, instead they removed my permission to post to their Facebook Page. WhirlpoolCare indeed.:) I will be handling this mostly through Twitter follow me at **. I will be using hashtag #whirlpoolsux going forward. I would request that you do the same. Thank you.https://www.facebook.com/WhirlpoolCare.

I bought a Cabrio Washer and Dryer around January 2015 at Lowes. After going through the worse service imaginable, the washer was like pouring salt in the wound. I like the dryer fine, but months later, Im still unhappy with the washer. While it washes OK, it takes forever to wash a load. Most of the time, it does not spin the clothes out enough. There is no way to just spin again. You have to go through a rinse/spin cycle and you may or may not get lucky with a sufficient spinning. Why cant they just have a spin cycle and why does it have to take so long to wash a simple load of clothes? I have bought many Whirlpool appliances, but this is my last ever.

I have a gas range Model WFG540HOESO Airlift self clean. When anyone reaches across or leans against the range, ever so slightly, the knobs turn and gas is released. It is EXTREMELY dangerous. The Airlift self clean has never worked. When the repairman contacted the technicians at Whirlpool, they told him that there was nothing they could do. In other words, I am stuck with an oven that will not self clean. The water in the bottom does not even come to a boil.

My husband and I, purchased this washer on November last year, I used twice before and I noticed that the clothes felt hot, but the cycle was COLD water. Now use it again until June 2015. In every cycle the clothes were hot, I started calling to get an appointment in June at the 1800-253-1301, but the system was down twice. Then in July then again the system was down, then August 10, system was down. I did not wait more and called back the next day, August 11, got appointment for the 20. A technician came, he told me that the hoses was switched, but I know the hoses was installed correctly, my husband was here at the installation. He knows the proper installation of the washers.

I brought a water heater from Lowes in 2011 and I had a 6 year warranty on it which will end November 2017. Well now the water heater is leaking and they wont replace it because of the location of the water heater and they saying I need to get a direct water heater. Well what is the use of having a warranty if I cant get another water heater. I will never buy another water heater from Whirlpool! I cannot afford to get a direct water heater.

Switched to bottom freezer and love the size. We all use and enjoy the filtered water. Whirlpool has proven to be a manufacturer I will always consider when making major appliance purchases for performance, service, and dependability.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

We purchased our new Whirlpool Cabrio washer on November 1, 2013. From the start this machines performance has been a disappointment. We bought the machine at The Brick (I should have known better) where we had made several purchases over the years ( I guess Im a slow learner). Right off the hop, my wife and I noticed that the clothes were not coming out clean. Even though the machine is Eco and therefore advertises that it uses less water, there should be enough water that the clothes at least get evenly wet. That may be a problem with the agitator not seeming to have the guts required to pull the clothing down to the bottom of the drum. We went back to The Brick and told them that we were not happy with the machine they had sold us and quite predictably they told us that we should call Whirlpool (This was less than a week after we had it delivered. Did I mention that I may be a slow learner?). We called Whirlpool and they told us they would have a tech out to take a look at it on November 11th. Wow, I thought. Hows that for service. A repair guy coming out on a statutory holiday. Of course it didnt happen. When we called them back to ask if their repair guy had made it home okay, they claimed that we werent there when the repairman tried to call to confirm his arrival time at our home. We hadnt left the nest the entire day. They then told us to go back to The Brick. We went back once again and told them, yet again, that we were not satisfied. This time they agreed to send their own man over to take a look. He came over yesterday and watched the machine go through an entire wash cycle and then said that there really wasnt anything he could do, as even though it may do a crappy job of washing the clothes, it at least appeared that mechanically speaking there didnt seem to be anything wrong with it. We called Whirlpool back today and they said that there isnt anything wrong with it mechanically so from their end, at least, the story is over. What kind of customer service is that????? Maybe Whirlpool and The Brick deserve each other, but I think we should get better treatment than that

I HATE this washer!!! Did I say hate this washer? YES. Do not buy it. Delicate cycle. Ha ha ha. NO!!! Good thing Im retired because I need to check it every 5 min to see if its getting clothes wet or untangle a mess. I find I use the rinse and spin cycle once with a little soap and run it again to rinse. A lot of extra work. Sheets washed in the deep water cycle turn into a giant twisted mess if you dont stop machine and untangle everything. Hate it. Hate it. Do not buy this machine. I use more water by washing things twice or fewer items. What a waste of time!!! Locking lids are the worst thing ever designed. Why?? Dont tell me some stupid kid is going to climb in it. We should have a choice or be able to disable it!!! Worst machine ever designed???

I purchased this machine, a Whirlpool Cabrio WTW5640XW, from Lowes on Dec. 11, 2010. I just realized today, Dec. 24 2012, I had a 2-year extended warranty plan! Shame on me. At any rate the washing machine is very hard on clothing, tearing light fabrics and ruining my wifes bras. The clothes often come out with shreds of fabric from the other clothes in the washer. Oftentimes, it will not complete a cycle because it constantly goes out of balance. Today I paused the machine halfway through the wash cycle after the soak cycle to throw in some more laundry and start the cycle over. Half the clothes were still dry! Yes it may save water, but if you only use a cup of water for a load of clothes, how well can it clean? My wife has sensitive skin. So now we wash a load with extra rinse and normal soap then run the cycle again with no soap to get the soap residue rinsed out. Were saving big now! Yes, we are using HE detergent and the recommended amount. The machine is pure junk. I would love to see a class action suit against Whirlpool for selling such an inferior product. I know thats asking a lot in the land of no accountability we live in today, but one can always dream.

1 year ago I purchased the top of the line large capacity tub cabrio washer and dryer. I dont understand why they sell a large capacity when you dont get enough water to get a handful of stuff clean. If they offered a trade in allowance for a standard agitator washer I would be first in line. Clothes dont look clean at all. Save your money folks not worth it.

I just contacted Whirlpool Co. by online chat concerning the workmanship of their microwave that is less than two years old. The interior top has begun to bubble and peel as well as rusting. This is the 2nd Whirlpool microwave where I am experiencing bubble and peeling paint as well as rusting. Whirlpool informed that the manufactory was 1 year warranty and to contact a technician at my expense. There is a real health issue here and I hope consumer complaints about this company is being monitored by someone who can help all of those with concerns.

The clock-timer went out. Appliance is only 1yr. 6mo. old. I CONSIDER THIS STILL A NEW APPLIANCE. This is the 2nd Whirlpool appliance, I bought a Whirlpool washer & dryer. The washer went after 2yrs. use. I bought a Kenmore used washer and it still works. I paid cash for the stove. It was bought at a Sears outlet in Cudahy, WI for $398.58 total with the one year warranty. I really have not gotten the use of the price. I guarantee you (this company) I will NEVER buy another Whirlpool appliance again. TOO BAD YOU COULD NOT RETURN A PARTIAL OF THIS MONEY TOO ME!!!!! I have a Sears repairman coming today 8-3-13 costing me $75.00 just to walk in the door.

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.

Had a part come off right after our purchase but was a easy fix to repair. The silverware basket also kept coming off until we looked at it and realized it was on wrong. This dishwasher is much quieter than our last one. It also shows fingerprints. We got this dishwasher in a group purchase during a sale at Lowe’s that included the refrigerator a stove, microwave and this dishwasher.

My appliance is less than two years old, and it wont stop heating. I have to manually turn it up and down to heat water, which seems strange, since most or all of the complaints are because it wont stay lit. Mine stays lit (knock on wood). It wont shut off. A new thermostat costs $60.00 after two years? Please.

Never buy a Whirlpool appliances because I bought the top of the line washing machine and after 4 years I had to replace it. And then I bought the top of the line refrigerator and after 6 years it goes out!!! I definitely will not recommend a Whirlpool ever!!! And me and my husband do construction and are asked a lot for a good appliances and we will tell our customers not to buy because Whirlpool is assembled in Mexico and their products are not worth putting in stores!!! Whirlpool is not the appliance that anyone needs so I definitely will tell everyone I come in contact with!!! Very dissatisfied!!!

(Model WTW5640XW3) Whirlpool Cabrio worked Good for 11 months (just after warranty Expired). Replaced capacitor would not spin, hums loudly and smells like burning Plastic. Then about 2 months after that Lid locked, failed, replaced. 7 months then Actuator failed and now looks like the Main board give up. I dont know where The original parts are made but they are Cheap junk. New technology is crap for Washing machines, gears transmission and Solenoids last a lot longer plus they clean your clothes. And belts and solenoids.

Even with the hottest water on the most heavy duty setting, regular dinner plates are not cleaned. The flatware holders that are set in the door (instead of free-standing in a rack) do not have adequate holes in the holders and are too far away from the limited jets to get adequate soap and water to cleanse the flatware. Even after rinsing all scraps off the plates and flatware, we find bits of food, gravy, or smudges on the plates and flatware - since its first usage. The manufacturer had the audacity to claim that was normal. Settings include delayed starting, heavy duty versus normal washing, and different types of drying. The heavy duty washing is definitely poor quality, and there seems to be no difference between any of the drying settings. The delayed start is nice. The physical layout of the prongs on the racks and the folding racks do not allow easy fit for most sizes of pots plus plates on the same bottom rack. I cannot put a 1 gallon pot level on the same rack as dinner plates. I must put it beside salad plates. Only small sauce pans fit neatly or cleanly beside dinner plates. Yet the external dimensions of this dishwasher are the same as the competitors standard size. Looks neat and is easy to clean. Also, the exterior does not show scratches. Actually, I cannot see where the exterior has any scratches. The service people were very little help. The Warranty said that after five (5) service calls the unit would be replaced. We made six (6) service calls, but we were told that we did NOT have six because if you called again within 90 days of a call, that was considered the same service call. That requires 450 days minimum to have five (5) qualified service calls, but that warranty was good for only 365 days!

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

I had one of the first Maytag Neptunes. Loved it to pieces but finally had a problem and my beloved repair guy said it was almost 20 years old so to give up and move on. Obviously, cant be without a washer for very long so grabbed this Whirlpool Cabrio Platinum Washer. One of the biggest disappointments ever! Clothes come out streaked and splotched, dont smell very fresh or clean even straight after having been washed, stains dont come out even with pre-treating, have to run everything on heavy duty, whites are getting grayer by the week, and all-around horrid performance.Im ready to give up my Starbucks, start packing my lunches for a couple months, skip whatever treats I have to in order to get back to a quality machine that can actually WASH CLOTHES. I wondered exactly what it was or wasnt doing so I stood over it for half an hour. Initially, it loads up about a gallon of water and then spits it out over the rotating drum of clothes. Then it stops and spins that water out. I suspect the design logic was that it would force that gallon of water thru the clothes taking some dirt out with it. It repeats that stupid process several times. Then it finally gets a few inches of water in the bottom and the vestigial agitator tries to move it around.I watched one hand towel lie on top like a dead weasel, never getting pulled down or pushed out or whatever it was supposed to do to get down among the other items and squish together. Life throws me everything from sick kids spewing body fluids to people coming home reeking of hydraulic and other industrial fluids. When I say clean I mean CLEAN. This piece of junk couldnt satisfactorily process half a dozen dust rags. Neptune, Im coming back with my hat in my hand and a whole new appreciation!

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

The Cabrio washing machine I was told by salesman best made so I spent big $$, makes sense right?! Wrong! During spin cycles sounds like jet plane taking off, was told barrings or drive shaft is at fault cause water seeping inside, causing rust, Whirlpool didn’t seal it or designed it to ensure no seepage. Never again Whirlpool. I’m done with your ineptitude, Type: 580. mod. WTW6500WW1. Set.# CY4970595.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

My brand new oven kept turning off automatically. When reported, they kept sending a technician who kept lying to both parties regarding what the issue was. Whirlpool customer service people have been extremely rude and declined to fix the issue although my oven was under warranty without giving me proper reasoning for their actions. I am truly dumbfounded with this experience!

We have a Whirlpool Gold fridge that was manufactured in 2009. MOD: GS2KVAXS01. SER: HRY0570897 and it has not been cooling properly for the last few weeks. Some days it is fine, the next day not and we have had to throw our a lot of rotting food. We got the fridge checked out and were told the Electronic Control Box for the fridge was not working. My question is, why would a Whirlpool Gold fridge that costs $1800 or so have such a large issue with 3 years? Its practically a brand new fridge and Im outraged that a large part of the fridge is not working. I understand parts break and there is warranty but its pretty bad that after the warranty expires the control box would become defective. I have been a loyal Whirlpool customer and solely buy the brand and this break upsets me very much. Especially since replacing the part will cost me $400 plus labor, we are talking about a part costing 30% of the total fridge cost! That is ridiculous. I am hoping there is something you can do to rectify this, as a fridge manufactured by what I thought was a great company should not cause such an issue and I would like to continue to buy Whirlpool products but not if this is the case.We have called Whirlpool customer service many times to be ignored, berated, told I cannot speak to a supervisor and nothing will be done. Never in my entire life have I ever known a company so horrible to exist. I have had bad service before but this takes the cake. Plus, no company that I have ever dealt with would ignore you and not provide any discount or remedy. I cant believe this is a big brand with the way they carry on. You would assume they would be some one person owned company who doesn’t have a penny to spare. I don’t respect this company at all and expect a resolution because they are truly insulting in all the channels.

Purchased a larger hot water heater after reviewing the offerings from the big box stores. Obtained a 40 gallon Lo-Nox type. No problem. Found that I did not have time to install and 3 months later had a company install for almost $300. Within the first month the pilot went out at least 5 times. Had the install company come out and take care of the problem. Worked OK for 2 months and now the pilot light goes out again. Watched the flames myself and find them to be yellow. OK, so try to see what the situation is, call the installer, then call technical support. I am in a basement, on a cell phone and the representative basically has zero patience, zero tolerance for questions, treats me like an idiot and probably has never looked at any of the guides but keeps harping on me.I asked 5 times for patience and guidance not to be treated like an idiot. As time went on it was clear that the representative has zero experience in front of the product or the information in the install guides. She kept calling it a manual and I tried at least 3 times to ensure that her manual is the install guide. She never did affirm. I stated I wanted my money back and she stated no. Whirlpool has a very skillful representative to keep consumers away.However this consumer is a small apt owner that purchases appliances, as well as hot water tanks microwaves etc. No longer will I purchase anything Whirlpool. Oh I will send a complaint about this rep, and she said thats fine send it to the PO box Total lack of product knowledge and not even skillful in a conversation asking for assistance. The installer also stated that this product has horrible reviews. I wish I had seen them before all of this. Total frustration and something unwarranted. I am out $900 and am replacing the tank with a Bradford white from the plumber. Lesson learned. Good bye Whirlpool, hope others stay away from Whirlpool everything. Choosing another brand is the only thing that makes businesses wake up and smell the money.

The wash machine is JUNK. We paid $2500.00 for our washer & dryer at lowes in 2012. I HATE IT from the start. It has destroyed most of my clothes. I hate doing my clothes. The water does not get my clothes wet, they dont get them clean AND the washer dont even get them wet. THEY need to do a recall or get us a lawyer. ALL the money I have put in this washer. The price we paid for them is a SHAME. IT is WRONG they are telling people that this washer is the best. They lie. I HATE HATE THEM.

We purchased 2 whirlpool commercial coin operated washer machines and both computer boards had to be replaced twice each - model CAE2743bqo and CAE27438qd.

I had noticed water on the floor and just thought someone left the freezer open. It started happening about every other day. I read online that it was probably from the drain in the bottom on the freezer being clogged or frozen, and I found instructions on how to fix it. After we took the door off, the drawers out, and the back panel off, then we started thawing the drain. Finally, I got it cleared out. Here I am, a month later, there’s water on the floor again.

Whirlpool Refrigerator WRS526SIAH00. Well we have always had a lot of trust in Whirlpool appliances over the years. Just about everything we have is Whirlpool brand including water heater. We remodeled our kitchen and bought a new refrigerator in July 2013 (just for the color/look change). We have had nothing but problems from day one with the water/ice dispenser water may or may not work. Now (AUG 2015) the refrigerator side started freezing our food, milk and tea gallon jugs frozen solid. Went down a self fix list on an appliance parts website using our fridge symptoms, said it was probably the bimetal defrost thermostat. Replaced that part. It didnt fix it.So I did my own troubleshooting and found the cold air was continuing to push from freezer into fridge area, found this cheaply made plastic damper broke and stuck open. Now that part will cost another $50+. Whirlpool knows about these cheaply made parts they have put in these appliances. You cant even get to this part without taking things apart. This is a cheap manufacturers plastic part and Whirlpool knows it. Its not the consumers fault. It was a joke when we received an extended warranty offer from Whirlpool for just $208 per year or $626 for 5 years - I wouldnt spend another dime with Whirlpool. The price is high because they know how many parts are breaking on these units. You shouldnt have any repairs for 10 years on a refrigerator. We are stuck with a lot of Whirlpool products now, but we are done with this brand. Dont waste your money.

Ive owned my Whirlpool appliances for almost a year. So far Ive had 4 maintenance calls for my dishwasher to be fixed (over and over) and once for my refrigerator. Yes, its currently under warranty, but Im afraid to keep it without an extended warranty due to all the issues Ive had with them. So, now Im going to be spending hundreds on an extended warranty. I will never buy another Whirlpool.

I hope this review makes it to the president of Whirlpool! My husband and I built our first home and finally moved into it on April 22, 2017. We saved everywhere we could and I did my best to research my appliances. I was so excited to buy a BIG refrigerator for our family of five, (3 are hungry teenagers!) after years of using a smaller side-by-side. We went with the 31.5-cu ft French door/drawer with dual icemakers, model #WRF993FIFM. The original price was $3,599 but we got it on sale for $2,298 at Home Depot. After only 5 months it stopped cooling! I woke up one morning to find a fridge full of spoiled food!! After waiting 3 weeks I had 2 different repairmen come out and have been told that it is un-repairable due to two parts that are needed, one of which is on back order indefinitely. Ive called Whirlpool numerous times and only get the run around and Im sorry mam we cant do anything else. So Im just supposed to be without my refrigerator until who knows when?! The first 2 weeks of this crap we had to live out of Igloo coolers on our back porch. That meant no buying real groceries, only milk and juice and drinks. Thankfully the awesome people at Home Depot brought us a loaner, which is an apartment size fridge, to use while we wait. So now I just have to walk across the house to my garage every time I need something, and I cant buy much food because it wont fit!! Im so disgusted with how Whirlpool is handling this!!! Not only did we buy our fridge but we also went with Whirlpool for our stove, dishwasher and microwave, and we already owned a newer Whirlpool washer and dryer set. We spent thousands of dollars and cant even get them to exchange this piece of junk! Come on Whirlpool, surely you dont treat all your customers this way!? Do the right thing and let us have a replacement!!!

Do not buy a Whirlpool refrigerator. Worst product ever. Literally broke within 3 months. Needs a new compressor and evaporator. They will not exchange the product and the parts are on back order for 3 more weeks.

I bought a front loading Whirlpool washer a few years ago after having my old top loading Kenmore for 25 years. It seemed okay, but I did always have to leave the front door open and it always smelled musty, which was of some concern. My clothes never smell totally fresh. The biggest current problem is that several months ago it started with a failure code, alternately would stop without draining, wouldnt fill, or wouldnt drain, and ultimately ended up flooding my basement. So we called for service and they replaced a sensor and said these machines seem to have a lot of service issues with sensors blowing and motors dying. So I paid them that time. Now its a month or two later, failure code again, calling for service one more time. But if it costs too much I will join the legions of dissatisfied Whirlpool customers and will switch to an upright competitors brand.

Cabrio top loading washer - I have had this set for 3 years. The first 8 months it was fine, then came all the rust. I had to go to the BBB and file a complaint as everyone at Whirlpool would not help. Last year they finally replaced the top, and now, its rust yet again. I rinse and dry the machine when I am done using it. The repair man said it was because manufacturers are not using primer and just one coat of cheap paint. What now? Ill see if I can get the lid off and sand it and use rust preventer on it. Never again, I should just junk this piece of crap and Whirlpool should shut down if they cant make anything worth our hard earned money.

Purchased the Whirlpool Cabrio supposedly a top of the line washing machine? Not even three years old, used 3 times a week for normal to small loads, for a family of three. Stopped spinning water out, so clothes are soaking wet at the end of the cycle. Repairman said I need a new transmission and inner spin basket is completely worn. New parts will cost me around $500!!!! Repairman said this should not be this worn down in 2 1/2 years. I purchased this machine to replace a Roper brand machine I purchased used for $200 and had for over 10 years without issue! I will NEVER buy Whirlpool again. They do not stand behind their product! I should not have had any issues with this machine for at least 10 years!

We bought the washer and dryer set almost three years ago. Great sales pitch! Energy saver, extra capacity, low water usage, Whirlpool name and I thought we were getting great quality! Three years later I am disgusted, disappointed and am junking the washer. The dryer has a new heating element that we proudly fixed ourselves after the repairmen told us that these were meant to be throwaways. We just thought he did not want to work on it. After watching several YouTube videos we had it apart and found the issue was a cracked heating element. We ordered a new one for 100$ and spent another 4 hours putting it back together. If we had to pay a repairmen to do all that the bill would have been the price of a cheap new one. Fast forward three weeks and now the washer quit and it can be one of at least 15 problems. After reading all these reviews we have decided to toss it as junk. It took forever to was a load of clothes negating any energy saving! Whirlpool should be ashamed of themselves for ripping off all of us hardworking Americans selling us junk. At one time the Whirlpool name meant you could count on a quality product! If Whirlpool really wanted to do the right thing, they would stop selling these immediately and give customers a credit toward the purchase of new washers and dryers!

I bought a Whirlpool gold side by side with freezer on bottom and the ice maker in refrigerator part in March of 2013. Ice maker dropped ice one time. In 5 days Lowes brought me a new one out and swapped it because it was in their 7 day policy. Ok this one worked good for about 2 months. Ice maker quit again. Service came out, changed out some parts that didnt work. 2 months roll by the new parts they ordered came in. Service came out again, put those parts in. Worked for about 3 weeks then stopped again. 3 times new service guy comes out and replaces some more parts and he had the wrong motherboard so guess what, had to order. It took 4 weeks to get it here. They came, put it on. It worked for around 2 months. I asked Whirlpool for my money back, they said that that was not a going to happen. I asked for another refrig, they said they would have to have 3 more service calls on the frig before they could do that. Well I have got a $3000 dollar refrigerator that has no working ice maker and Im sick and tired of the runaround. Whirlpool sucks. I will never buy another thing with their name on it. Matter fact I wouldnt take it if you give it to me. (Why) you ask, because in a short time Im going to have to haul it off for junk and its not going to bring nowhere near what I gave for it at the scrap yard.

I have purchased a Whirlpool refrigerator and it has passed only 1.5 years and I have repaired it twice. The cost of repairing is also very high. Service charge is very high so I called a local party to solve the issue. They checked and found that a capacitor and a compressor relay is not working. They replaced the two and debited a cost of Rs.1500.

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

Purchased Whirlpool Washer Mod# WTW57ESV1 12/9/2011. Washers transmission blew on 1/20/2012. Requested Whirlpool replacement. No results. Will never purchase Whirlpool products again.

My Whirlpool Cabrio Washer is less than one year old and quit working. Sears was supposed to come out and fix it (I even have the extended warranty till 2014). Service never showed up; when we called, they told us we had been rescheduled. Here it is the rescheduled day time slot and they still have not arrived. Im getting the runaround from them and I am supposed to be grateful because they gave me a $75 gift card for my inconvenience. Im on hold with Whirlpool because I just want them to take the washer back. I have been told by Sears since it is over 90 days, they cannot refund my money. I just have to wait for a repair which may or may not happen since they may not have the parts. This is unsatisfactory service from both Sears and Whirlpool. I have always bought my appliances through Sears and they have always been Whirlpool. I wish I would have read all these reviews before I purchased this model.

As a consumer, Im very disappointed in this Whirlpool Cabrio Platinum washer. It does NOT clean your clothes. Many times Im washing my clothes twice, only loading a 1/3 of a load of laundry in it because of this problem. No matter what you do, it just doesnt clean your clothes. Has anyone considered putting a law-suit against the company. They will NOT stand behind this issue, NOR replace your washer with something that works. Maybe that is what it will take. DO NOT ever ever ever ever ever ever buy this piece of crap washing machine. You will waste your money, your time, your extra detergent it takes to wash your clothes AND the cost of the machine too! The MILDEW SMELL is horrible and no matter what you do you CANT GET IT OUT! Ive tried it all. Im just angry because I had to save money to purchase this set and it is a piece of crap! The customer service is just a runaround, they wont help you! They will just give excuse after excuse. They need to replace EVERY ONE of our washers with something that works!!! For the cost of this machine alone, they should do something to resolve this issue!

After one of the door shelves in our new refrigerator cracked, I ordered a new shelf from our local agent Neuman Appliance repair in Ashmore, in July of this year (2014). I was told that it would take a while as Whirlpool were notorious for poor service; however, it is now the middle of September, and we are still waiting!When we ordered a new part for our dishwasher from Fisher and Paykel, we received the part in just 3 days. I mention this to give an idea of what good service should be.

My boyfriend and I purchase a Whirlpool Cabrio Washer and Dryer on November 28, 2010 from Lowes in Shepherdsville, KY. Just after we purchased the set, I read some bad online reviews of the set. I called Lowes and talked to Chris ** in appliances and he assured me that this was a good set and that it was very popular with their customers. He assured me that if there were any problems that Lowes would make sure they did everything they could to fix and/or replace the appliance(s). My intention was to cancel the order when I called, but he convinced me not to, now I completely regret not canceling that order that day.In May of 2011 we called Lowes to report that the dryer was not working properly; they sent a repair person from Maytag Service Co, 1500 South Shelby, Louisville, KY 40217, phone number 502-637-6526. The name on the card that the repair person left is Steve **. The repair tech indicated that the problem was that the belt had come off and he put the belt back on the dryer. It has worked without issue until about 2 weeks ago, when it stopped drying again. I assume the belt is off again since it is performing exactly the same as it did in May when we had the repair company out.I called Maytag Service Co approximately 1 to 1 1/2 weeks ago to see when a tech could come back out and I was told they only work Monday - Friday. I told them both my boyfriend and I work and cant really take time off from work to be home for the repair. The male on the phone indicated that they could call 30 minutes before arriving if that would help. I told them that wouldnt really help since I work in Louisville (about 30 minutes from Shepherdsville where we live). He indicated that was the best they could do.Yesterday, November 7th sometime during business hours. I spoke with someone in their appliance department. He indicated that I would need to call Maytag Service Co at 502-637-6526. I called them and was advised that they could come out the next day (today), November 8th, but they could not give me a time window. I spoke to a female who did not identify herself. She specifically stated, If someone has not called you by 8:30 a.m., you can call us and we will give you a time window. Since I had just earned a vacation day at work, I so desperately need my dryer working that I took the day off to get the dryer fixed. I got up at 7:30 a.m. this morning to prepare for the service call. I have not left the house today. At 9:20 a.m. my boyfriend called and said that the service company had called and they were not coming out. I called them back and again spoke to an unidentified female. She indicated that they called my boyfriends phone at 9:00 a.m., he called them back at 9:20 a.m. I was on the phone with the female at 9:25 a.m. She indicated that I should have called at 8:30 a.m. and that they never call their customers because they dont have time to call them all. She said that when my boyfriend didnt answer the phone at 9:00 a.m., they had to send their tech on to the next call because, they cant have their tech waiting around 20 - 30 minutes on customers to answer their phone. When I told her that I took my only vacation day to be home for this call, she indicated that I would have to reschedule for another day because their tech was already on his way to another city. I then stated that I thought that was ** and she hung up on me.I called and spoke with the store manager at Lowes in Shepherdsville, KY. He called Maytag Service Co and was told that I used profanity and was rude and that I would not provide them with an alternate number. Most if not all of these are lies. I did say **, but I was not rude and I was never asked for an alternate number. I give out my number and my boyfriends number to almost any company we deal with. My boyfriend is also a service technician for Icee Corporation and he is not allowed to be on a cell phone in his work truck; therefore I always give both numbers since I can easily answer the phone throughout the day. The store manager made several attempts to try to find another company to come out and service our dryer, but cannot find anyone to come before tomorrow. Since I used my only vacation day today, I cannot be here for the technician and my boyfriend doesnt have any vacation or sick time to take to be home for the call.I cannot believe that after spending over $1300 on a Whirlpool Washer and Dryer set (including several hundred dollars for the extended warranty), that we cannot get our dryer serviced at our convenience. Since when did companies only repair or back up their products at their convenience? This in my opinion is the worst customer service I have ever seen. I thought Whirlpool/Maytag was a good company; now Im not so sure. I just wish I could return the set and do more research and find a quality appliance that wont break down 2 times in less than a year!!

The clothes have a stale and mold smell. The whites like tee shirts and shorts and other whites are a dingy yellowish color. The detergent that was recommended and pellets used every month do not work. I have called and complained several times and the operator said that she had one and it works fine, the other person said to wipe the inside of the washer and leave the door open after each wash and not to store the dirty laundry in the washer till next use. They never explained that you have to run a special pellet through the afresh clean washer cycle. Well, we have tried it every time and the clothes still do not clean and stink bad. We asked them for an exchange and they said no. Is there anything we can do?

Don’t ever buy Whirlpool smaller (apartment) size front loader washer and dryer - from Home Depot or anywhere else. Beware of rules in warranty plans. I am very dissatisfied with them. I have had several service calls.

My hot water tank wont stay lit. I replaced the heating element, and the thermo couple. It will light up now but it only stays on for about 10 minutes.

Rust started forming early on our washer and spread quickly. Our house is air conditioned and not near the ocean. There was no reason for the rust. Poor quality finishing is the only explanation. When I called to complain I got nowhere. I wish I could show a photo on this website. It would dissuade anyone from ever buying a whirlpool.

I bought my Whirlpool Cabrio Washing Machine in 2010. I hate it 100%. I have never used bleach in the machine. I use liquid detergent only. 2 things happen every day: #1: When I wash a load of colors, I take them out when complete and there is dry white powder like substance over the black clothes. It looks dirty but it just got washed. #2 About once a week, I will pull something out of the washer and there is a bleach spot on it. The last item that this happened to was a $200 sweater. It went in the garbage. This should never of happened with an $800 washing machine.

I have had a lot of washing machines in my life and trusted that Whirlpool would have good products. Well, with this top-loader, I couldnt be more wrong! I have never had a machine that just sloshes clothes around - at best - leaving them just as dirty! Our water bill has greatly increased on top of that - I AM SO VERY DISAPPOINTED! Unfortunately I cant return the bad merchandise since I bought at a Scratch and Dent store (just a dent on the outside does not interfere with performance...).

Washer doesnt get soap out of clothes. Had tutorial from service man. Must use extra rinse every time and still have soap on dark clothes. Worst washer I have ever owned. Makes washing a lot of extra work and frustration. Have tried everything to no avail. Takes at least three times longer to wash clothes with all the steps I have to take to get soap out. I understand EPA demands for less water usage, but clothes still must be properly cleaned.

Purchased a Whirlpool double door refrigerator and within a year the freezer and refrigerator doors were severely out of line. Called repairman who said the risers were broken, they were plastic and needed to be replaced. We did that. The doors were again out of line so badly that you had to push the refrigerator door side hard to get it to close. Repairman came today and stated he would recommend ditching the refrigerator as the risers in the bottom of the refrigerator are made of plastic and will continue to break. He leveled the doors but stated that they will continue to become out of line again.The repairman stated that this is a design defect in the Whirlpool refrigerator and he has replaced the risers in many of the refrigerators repeatedly. As if the refrigerator isnt enough, we own a Whirlpool Duet Washer and Dryer. Within 3 1/2 yrs the motherboard went bad in the washer and we had to replace it. The part and labor was almost $400. Whirlpool considered us a valued customer and offered us a comparable washer for $500 and they would take ours away for $20 extra. Only problem is that our original washer was $1,000 and the comparable was not as large as the one we had and did not have the stainless ours had.All I can say is if were valued customers I would wonder how they treat their less valued customers. All of this is to say that I will no longer purchase any Whirlpool products. Not only are the products below par but the customer service is non existent. They really do not care if they lose customers or not. They dont want to hear your woes about their appliances.

This has been the worst purchase I have ever made! Within 2 months of it going out of its one year warranty I called (Lowes) to have it repaired. Spent $300 on the first repair to get rid of the jet engine sound AND the oil splatter all over the floor then within one month from that repair it has a F code error and wont finish washing a load. It just stops. I have tried everything from unplugging it to restarting and it just wont work. Now have to wait 1 week for the repairman to come back out (hopefully that warranty of 90 days will be helpful). Do Not Buy this machine!!!

Cabrio top load HE washer - Ive only had the washer a couple of years. My husband bought it for me thinking it would make washing more time efficient and energy saving. Lesson learned! After struggling with this washer for the past year, I was told today that to repair it, it would cost around $800 or I would need to buy another washer. The washers bearings and tub need to be replaced and it will not spin properly or at all. Previously, I have owned washers for over 10 years each. This was definitely not a good purchase. After reading all of the other complaints on this site, I understand that I am not alone. It was also mentioned on one complaint of the possibility of a fire hazard with this washer. Whirlpool should be recalling.

I just wanted to post a quick response to a problem that so many people are having with their Whirlpool FG1H5040T3NOV Hot Water Heater. The biggest problem is the Pilot Light Wont Stay Lit. Ive had this water heater for many years now (since 2005) and two days ago we didnt have any hot water. I checked the heater and found that the pilot light was out and that when I lit the pilot light with the igniter, it wouldnt stay light. This could have been a number of problems causing this issue but heres what I did to get it fixed. I looked around on the internet and saw that many people had this same problem and several years ago Whirlpool gave out warranty replacement upgrade kits to fix it. I called Whirlpool support, gave them my serial number and mentioned the upgraded kit. Unfortunately, my 9-year warranty expired a few months ago and I am no longer able to get the upgrade kit for free. Apparently this upgrade kit was part of a settlement for this water heater that was sold through Lowes. The upgrade kit has a few enhancements including an adapter to allow the use of a standard right hand threaded thermocouple as well as a larger pilot light window and added safety thermal switch. This is definitely an improvement over the old.Anyway, I looked at Lowes website for this upgrade kit and their description and internal part number is slightly different but it is the same thing as confirmed by Whirlpool. Whirlpools part number is 6910813 for the conversion kit. Lowes calls this part American Water Heater Company Gas Enhancement Kit 5040T NG. This kit is only $35 which isnt bad. So, I went to Lowes, purchased the kit. The instructions are included and are even good for a novice. It took me about an hour to complete the changeover. Youll need to remove the old burner and orifice to use them on the new kit. I then checked for gas leaks. I lit the pilot and when I turned on the heater, the burner lit right up. All is good now!

I have had this front loader for 5 or 6 years. My clothes absolutely stick, I cant stand the smell of them. I have used Affresh, the recommended cleaner 3 days in a row, multiple cycles, no improvement. I did the vinegar treatment, leave the door open etc. What is upsetting is I have read Whirlpool has been aware of the mold and mildew problems of front loaders yet continue to manufacture them. The gasket in the front enclosure pockets at least a cup of water and other gunk from the wash. A waste of money!!!

Whirlpool N50T91-403 purchased in Mar 12 had an error code 4. I knew the water heater had a safety installed in it when I was working on the plumbing and allowed it to drain the hot water side down to 16% of capacitance of 50 GL. After the plumbing issue was resolved, I saw the water heater had shut off (thermal protection) but the switch wasnt tripped as far as I could tell. Knowing small processors can only remember anything if they have power, I removed the Honeywell circuit board and with my multimeter probed all of the capacitors contacting them both (-) and (+) and in reverse order. Doing this forces the IC to forget its codes because they require a small amount of voltage to remember them, usually powered by a small capacitor. I reinstalled it and voila! Presto! It works again.

Paid between $800.00 and $1,000 (cant recall exactly) three years ago and the oven locked recently while cooking a pizza. Couldnt get the lock to disengage and the oven turned on self-clean mode without me doing anything. The pizza burned crispy before I finally got the door open. The failure code for the control panel showed up. I didnt buy the extended warranty because we only needed it to last 5 - 6 years until we do a full kitchen remodel and the really inexpensive (~ $250) oven that was installed by the previous owners to sell the house lasted six years with no trouble. Now we have to pay $391.00 to repair what I consider a brand new oven. In doing some research it looks like the control panel fail is common and is associated with using the self clean mode which we only used once. Great oven if you only need one for a few years and are willing to pay the price.

Whirlpool electric range with ceramic cooktop - I have a large black mark on one of the cooktop burners that appears to be beneath the surface of the cooktop. It’s almost within the finish of the burner and unable to be cleaned with cooktop cleaner. I have purchased an extended warranty and arranged for a service call. The repairman came out as scheduled, but informed me after making a phone call to who knows, because he did not tell us that the problem was cosmetic and could not be repaired under warranty. However, if we wanted a replacement cooktop, it would cost almost as much as a new stove. He also said that he had seen many of these ceramic burners with that problem and it was not unusual. All I really want is what is fair, a defect that is not my fault that needs to be replaced. The stove (Whirlpool electric range with ceramic cooktop) was purchased in 2004 and is kept very, very clean.

My Brother-In-Law bought a Whirlpool Gas Water Heater from Lowes last year. The Water Heater was still under warranty and would not stay lit. He called Whirlpool and they told him to send them a picture of where the water heater was installed (really? a picture). They told him he could not order the replacement part which was a Thermopile because he had to have a licensed person install it? Really? In your own home? My husband finally got Lowes to order the part because Whirlpools only help was for him to purchase a new water heater and Lowes would give him 10% off a new one. Lowes and Whirlpool have a monopoly on water heaters. Whirlpool is the only brand that Lowes sells. So if you want your warranty to be good on a water heater DO NOT BUY WHIRLPOOL.

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

The washer is only a couple of years old. It does the job but its not something wonderful or great. The previous one was a Kenmore but it was built by Whirlpool. It works. Thats all I can say about it.

Four years ago, my wife and I also purchased a Whirlpool washer and dryer set, washer model no. WTW6600SB2. Within the first year we had to replace both pumps twice, user interface, and control board. (I think that’s what it was called). Of course, that was all covered under warranty. But I to had to wait a week for the part and then another week for the repairman to make it. The user interface and control board had to be replaced because moisture got into the control panel and caused corrosion on the circuit boards which caused them to short out. Then it wasn’t long after warranty ran out, the whole wash tub and drum just dropped to the floor with a full load in it. I don’t remember exactly what was the cause of it, but I do remember it cost me $580 to fix it. Then it wasnt more than two weeks later, the repairman had to come again and replace the control board again. There went another $600 for the parts, labor and service call because this time they had to come from 40 miles away and it’s a minimum fee of $89 just for them to drive up here and another $60 for diagnostics, and then the part and their time to install new board. I paid for this machine twice in the first year and a half. Then after all of that, it was finally working like it should and worked great for about 6 months, then came the UL,LD, and Lid Lock codes over and over unplug, plug in, unplug, plug in. That lasted for about a month, and then all of a sudden, it straightened out. And we only got the occasional UL code. Now in the last year, I have had to replace the drain pump twice and then the drum and motor dropped on the shaft allowing any loose change or other items if accidentally missed during pocket searches to fall into the outer wash tub and get sucked into the drain pump and causing a quarter to be shoot through the drain pump making a hole and caused my laundry room to flood. Well, I decided I wasn’t going to buy another part so I used a plastic repair kit to fix the hole and got it up and running. A week later, the washer won’t wash. It will fill and that’s it. So upon my own diagnostic, I came to the conclusion that it was the user interface that went out due to corrosion I found on it. So for another $120 I can fix it, but I’m not sticking another dime into the washer, nor will I ever buy another Whirlpool appliance. Once all of my Whirlpool appliances die, I will replace them one at a time with LG. I to contacted Whirlpool about my problems and all they did for me was send me an extended warranty offer for 50% off, really that’s it, that’s all I get is a big GFY after all the money I have stuck into this piece of scrap-metal. Well, never again will you have my business as long as I live. Whirlpool, you need to take your hoo-ya and do something about all of these complaints.

We bought a new Whirlpool just 3 years ago. The first year under warranty, we made several calls for repairs on the water and ice dispenser. The water was never cold and never fixed. Just after the warranty expired, the water stopped dispensing completely and now the ice will not dispense. We bought this refrigerator to have cold water and ice at ease, but it never happened.

I bought a brand new Whirlpool fridge 3 years ago and it went out completely while on vacation. I lost 5 black bags of food. The compressor went bad due to it leaking Freon or whatever it is called. This is a recall on most models but they say not on my model so nothing is being done. So I will never buy another thing made by Whirlpool again.

Im with the rest of the people on here... The only mistake I made was not checking the reviews before purchasing a Whirlpool product. My washing machine is horrible... I dont recommend anyone purchase any Whirlpool products. Its cheap and has already stopped working twice in the last 6 months... I have had a repair man come out twice to replace the door locking mechanism... Not to mention the buttons dont work, they just slide back into the machine... Plus, you have to jump through hoops just to get the machine started the way you like it... If you make a mistake, there goes your whole ** load of laundry, not to mention the water wasted. Hell with Whirlpool - Dont ever buy a whirlpool product as long as you live.

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

I bought the Whirlpool Cabrio washer and dryer combo with max load capacity for comforters. This is the biggest set of junk ever. Where to start? There are so many issues, starting with the fact that nothing comes clean, no matter if I even put one small item in it at a time! The fabric softener dispenser is a joke. It runs straight through into your unwashed clothes before the cycle even begins. The dryer never gets the clothes dry on the first cycle. I find that I will rewash the same load of laundry 2 or 3 times and still not be clean and then dry same load 2 or 3 times. I wish Whirlpool had these shoved up their **! Never again will I buy anything by Whirlpool!

I purchased this machine from Sears on 04/23/2016 and have had nothing but problems and issues with it. It is loud and makes different sounds every time I use it. It has overfilled and underfilled with water a few times, the machine shuts down while washing and I have had to restart the machine. Half the time the clothes come out covered in soap and I have to put them through another rinse cycle. My bedding always has to either go through a second rinse cycle due to being covered in soap or I have to rewash it because it is all packaged together in the fitted sheet and never got washed. During the spin cycle it sounds like it is getting ready launch into outer space and it vibrates excessively. On numerous occasions I have had to untie my clothes as they are tied in knots. There have been times that I had to put the clothes through another spin cycle because the clothes contained too much water. The final straw was last week (03/27/2019). I washed my sheets and they came out bundled up in the fitted sheet full of soap stains and I had to rewash them. When the sheets were done I put the comforter in the wash and started to clean the house. When I went into the laundry room the washer was not running but the wash light was on so I opened the lid and felt the comforter and found it to be dry. I closed the lid and pushed the start button. After a few seconds the washer shifted to rinse without even washing the comforter. When the washer stopped running and the ready light came on I removed the comforter, unplugged the machine, shut off the water, disconnected the water hoses, placed the machine on a dolly and took it to my scrap pile. I could not find any Whirlpool washers with any good reviews so I purchased a Speed Queen with a 5 year parts and labor warranty.

I was going to write a negative review after our Whirlpool stove oven stopped working. We only had it for three years. Technician’s visit today was $70 for the information that we would be better off buying a new one because the motherboard is gone. However, after reading all the horror stories which are already here, I realize that we are relatively lucky - at least, our stove worked for 3 years... Still very disappointed and unhappy. No more Whirlpool products!

I like the fridge raider. It works great, I have had no problems. It has good space in the fridge raider part, but very small freezer. It’s a freezer onto fridge raider on the bottom. I would like more space in the freezer area. I would buy another Whirlpool.

I bought the Whirlpool Cabrio top loader set in 2006. Honeymoon was over after the first year and I had to change the dryer element then the washer with the F51 code six months later. Last year, I had to replace the heating element again! For the last six months, I have been dealing with the dreaded UL on the washer. I cant afford to pay a technician $100 to come out and tell me whats wrong let alone what they will charge to repair a problem that, from the looks of this message board, will never be fixed. I have no choice but to get it fixed in order to sell the ** machine. I paid $1400 for this brand new set and have already invested $500 in repairs. How is this possible? I had a 20-year-old machine prior to this and never had an issue. There are lemon laws for cars, why arent there any for appliances over a certain amount? How in this day and age can a company be allowed to sell such garbage? I will never, ever buy another Whirlpool appliance as long as I live. Any other brand can have my money any day.

After 48 years of marriage, I had never had a new, matching washer/dryer set. I had had several new washers, but only used dryers. These all were very good units and served me well for years. So I was excited to buy a new, matching set. I have never been soooo dissatisfied with anything in my life. As I have read from other reviews, the washer uses very little water, sometimes hardly enough to get the load of clothes wet, very little soap, and in my opinion, does hardly any agitating. I dont feel my clothes have ever appeared clean. The only ones that look clean were the ones that started out looking clean when I put them in. I know this is all an ecology thing, water saving, government guidelines, etc., but please give me my old washer back. It did enough agitation to get clothes clean. And the dryer usually will not get the jeans dry on the first attempt. I have tried various settings, and they just dont get dry. In short, I HATE THIS WASHER/DRYER SET. I have heard others talk about the same thing. No one likes them, but we are stuck with them. Would like to have the government step in and see how dissatisfied everyone is with them and force Whirlpool to give us our money back, trash these units, and buy something that actually works. PLEASE, IF YOU ARE LOOKING FOR WASHERS AND DRYERS, DONT BUY THESE. I believe they are called Cabrio.

Cleans dishes very well, a bit noisy maybe that just the model I have. Exterior is very nice, interior there is plenty of space for the dishes and pans. There are no streaks on the glasses. No soap scum left on the dishes at all, very good unit.

The 12 year warranty, means nothing. The heater only worked for 30 months, and then its upper sensor fault code flashes, and the heater shut down. I called Whirlpool, and they have me use an ohm meter to help troubleshoot the problem. So if you are not handy, you are out of luck. They decided it was my control unit that is defective. They will send me the part free, but I have to pay shipping and installation. What a deal, and what kind of management would dream up of this. The heater is marketed as a 12 year warranty model (only on the tank). Would anyone, having been through this, buy another Whirlpool product?

Whirlpool with four burner and the model that you self-clean the oven. It had all the features I wanted and Whirlpool has been around for a long time. Cost was right for my budget and it had all the options to it. I would have to move it out from the wall to find the model. Love the oven and the fact that I dont have to use caustic cleaners to clean it but simply have to wipe the dust out. One burner does not work and I will have to get it repaired. I shopped at a scratch and dent sale. The price was right and I could barely see the scratch and it had all the usual warranties. I need moderately priced appliances and if there were expensive features on it that I have not previously used, I would probably decline it. I do basic cooking and do not need expensive accessories. I can on my range and I have found the burners do not hold up well for canning. The burner I use for canning is the only one I have had problems with. That is the only problem I have had with the range at all. If anyone plans to can, consider purchasing the coil that is heavier to sustain the weight of the heavy canner. I would not be afraid to purchase Whirlpool again. My range is about 10 years old and other than that burner, I have had no difficulty. It is a mid-price range.

55 Gal Electric New in 2003 / Limited Lifetime Warranty - I paid quite a bit more initially at Lowes for this unit. Its stainless lined. I have had numerous problems since purchase. I had to replace the sensing element in the Smart Box in 2006. Then the lights started flashing again making a humming sound in the box. I took each piece apart in smart box and cleaned them, which seemed to help. Then the upper element that is also stainless that requires a special wrench to replace went bad according to the blinking lights. Lights stopped after several resets. Now, the water is boiling out of the top of heater and they tell me its the seal in the element that I never replaced. The cover for the element is off. Water cannot possibly build up and force out the top of the cover of tank. I am not an idiot, yet they tell me that is most likely the problem. They didnt listen to me long enough to properly assess my concern. Every plumber I talk to says its the separation of the liner inside the heater. Nonetheless, I have a water problem now in the basement and have never heard back from Whirlpool as promised with troubleshooting guide on an email. I am sick of calling and getting the runaround with every issue. The warranty is horrible for the consumer. Sure, you have a limited lifetime warranty, but when you cant get proper information when you need it, what good is it? Made in America is why I bought the product. I also need a new washer but will not be searching in the Whirlpool line due to their lack of care with an important issue with my heater.

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

We purchased a Whirlpool washer model WTW7500 in November of 2017. I found the clothes were not getting clean and also noticed that even after a full wash some parts of the clothing or sheets had dry spots! I checked all connections and called for service. As soon as the serviceman saw the machine he said, “yes, that’s a problem with those machines”. They are low water/water saving as per some American regulation and that’s what happens... you’re going to have to live with it. He also suggested running an extra rinse and using “deep water” function. I did this and it made very little difference except now a wash cycle for bedding is 104 minutes! Also, still had a big dry spot on my sheets!When I called again to Whirlpool they scheduled another repairman for a second opinion, turned out to be the same person with the same answers... I called Whirlpool again and was informed that my washing machine is working as designed! I argued that a washing machine is designed to wash and clean clothes so this one does not do what it is designed for... I spoke to the supervisor, she was actually just rude, also said I not had 30 days to make a complaint and I was outside of that, when I asked to speak to her supervisor she said there was no one above her although she denied being the owner of Whirlpool! (That’s my little joke). Anyway wish someone had warned me prior to this purchase.

Purchased a Whirlpool Electric Range August 2015. Purchased it because it looked pretty and the Aqua Lift Cleaning feature sounded too good to be true. As it turned out it WAS too good to be true! I have just read a # of reviews about this range and I agree with all complaints. Does anyone like this range? The AquaLift cleaning technology is a joke! The baking temperature fluctuates & I could not figure out how to improve on that (for the longest time I thought it was just me not being able to figure out my new oven). The most serious concern however, happened a couple of weeks ago when I turned on the oven & immediately the oven started to smoke and an electrical smell permeated throughout the house. Had I started the oven and immediately left the house our house would no doubt have been destroyed by an explosion/fire.Phoned Whirlpool & because the problem was so serious they had a serviceman at our door within 2 days (yes I am being sarcastic, it did take 2 days). At no time did the call centre express any concern nor did they advise me to unplug the range and to make sure I did not use it. Obviously, I would not use it but shouldnt that be something they advise as part of the checklist talking points.Serviceman arrives 2 days later & advises us that the parts alone would cost $650.00 & oh yes the labour costs to install the parts would be charged by the minute. I didnt even ask him how much per minute because only an idiot would repair this piece of junk!! The power cord to the range had basically melted right through; you could scrape the char right off the cord. The computer part of the range was shot and had a strong electrical smell to it. The serviceman basically said that I shouldnt shoot the messenger and charged us 93.45 to tell us that it was going to be a very costly repair.I disliked this range almost immediately and was looking forward to the day when I would have an excuse to purchase another electrical range. I did not think I would be shopping for another range within 1 1/2 years from the time I purchased this piece of crap!!! Nor did I think that there would be a possibility that this appliance could potentially be hazardous to my family and home. How long is Whirlpool going to ignore all these customer complaints? This range should be recalled! It not only is selling features such as the Aqua Lift technology that do not work properly, it is selling a potential fire hazard.I will never again purchase any appliance that is made by Whirlpool. Whirlpool makes a lot of appliances and uses names such as Maytag, Amana. KitchenAid, etc. I have purchased another range and this one is made by Frigidaire (no connection whatsoever to Whirlpool). I dont know what my experience will be with my new Frigidaire Range but so far I am loving it! Hopefully, my new appliance will not nearly burn my house down. Whirlpool: Step up to the plate & take responsibility for the defective electrical range you are selling before there is serious harm to persons or property! THIS ELECTRIC RANGE NEEDS TO BE RECALLED - MODEL # YWFE715HDEHD.

2012 1st year water dispenser stuck, would not stop pouring water until I shut water valve off behind refrigerator. Replaced switch under warranty. 1st year bottom mount freezer stopped working, replaced condenser under warranty. Handle coming off freezer door not replaced. Today Nov 5th past warranty date Oct. 21st 2012. There is ice buildup in bottom of freezer due to a duckbill valve that I just found out about... This is junk and I already replaced the washing machine. Now I am going to replace this fridge if I have to have money to fix this out of pocket. Dont buy whirlpool and i think they make the same thing under other brands like Kitchenaid. My fridge was registered with whirlpool and no one contacted me from whirlpool about the problem they were aware of, to tell me that the valve is free and labor was free for first two years. Now only part is free. What a rip off. My appliances were part of the purchase price of a new home from a developer.

I purchased the original Whirlpool water heater from Lowes in April 2008 for $372, and an installation charge of $443, grand total - $815. In February 2012 the tank leaked profusely, enough to ruin a section of hardwood floor in the room behind the garage where it was installed. Whirlpool provided me with return authorization, and Lowes provided me with a replacement water heater. So far so good. Since the original installation was done through Lowes, the replacement had to be as well, according to Whirlpool, but now they charged $500 with tax to install the replacement water heater! Grand total now is $1315. Fast forward to May, 2014 and the replacement water heater, just barely 2 years old, shuts off with a code of Bad gas control valve/thermostat. I call Whirlpool and an extremely rude 20-something staffer tells me the unit is out of warranty by one month! The replacement unit has no warranty at all - nada - only the original one does... Is this unbelievable or what?! BUT, they would be glad to send me the replacement of the defective part for $200 PLUS overnight shipping charges, and I would be responsible for all labor charges to install it. Had I opted for this my original $372 water heater would have wound up costing me in the neighborhood of $1800!! I told her in no uncertain terms what she could do with the repair part, and now I am going to go shopping for a water heater that will last me more than 2-4 years, and you can bet it wont be a Whirlpool, and it wont come from Lowes.

I bought Whirlpool gas water heater on July 2009. It keeps going out. It is not working. I found out you cant even get parts for fixing it. The dealers told me its junk. I was told to buy a new one. Then, I found out its been in class action lawsuit. How did I get to buy it after it was recalled? I dont know what to do.

We purchased a Whirlpool gas range on 12/3/11. It was to be delivered later that month and days before delivery we received a call the stove was damaged. They asked if we wanted it and could get it at a reduced price. We said no, we wanted a new one and that one was delivered on 1/4/12. This stove has had many service calls to fix the ignite for the oven. The ignite and a circuit board for this problem has been replaced many times. The smell of gas in the house is terrible from the many times you try to light the oven. This problem has happened many times when a family event was going to be done (Thanksgiving, making Christmas cookies). It is also very poor advertisement for the company and stove to have this happen when there are so many people around. They will have a tendency to spread the word by mouth. PS: When we called (12-13-13), the woman stated after 4 calls for the same thing there should be a replacement or a refund of money (All the calls have been for the same thing OVEN IGNITE and GAS SMELL).

We brought this in Jun 2015, within 1 weeks it developed its problems. Ive had service men out 10 times for ice buildup on the freezer side, and the refrigerator side not cold even on max setting, and the problem hasnt been solved yet.

Despite my claim being submitted within the first 4 months of purchase, Whirlpool would not assist in solving our issue. We purchased all major appliances from Whirlpool, to furnish our new home in August 2021. All appliances were white. The top of our gas range began discolouring immediately following the first use. The inside of the four corners immediately began to ware due to heat. I figured Id have time to put my claim in, and thought to see if it got worse. Once I finally had time to deal with the issue, I contacted them only to find out that we only had 30 days from the date of purchase (of which included 3 months of waiting for the products to arrive) to claim the issue, given that it was considered Cosmetic. Easy fix, since theyd simply have to change the top of the stove, but Whirlpool denied our claim. Do not purchase this product, unless youre looking for a sub-standard product and customer service.

I purchased this stove online and have been very happy with the features. I am able to use alternate settings based on the size of the Pan/pot. Cook timer, light, variable rack displays, etc. The only negative feedback is the need to add 5-10 minutes more to the temperature, based on the recommended cooking time of your recipe.

We purchased a stainless steel refrigerator thinking Whirlpool stood behind their product. Within days, the shelving on the door and meat bins and vegetable bins literally started chipping away and cracking. I have over a thousand dollars product held together by glue and duct tape so I can use my refrigerator. Neither Lowes or Whirlpool wanted to back their product. But it seemed they wanted to make a sale only on replacement parts... Now today I have learned my ice maker drum has chipped away... Thankful no one swallowed the plastic. We will never buy Whirlpool or recommend to our friends again.

My Whirlpool microwave has been great. Just the right size for my family, with enough settings that it wasnt complicated to use. I found it was very useful with different recipes that I liked to make. I always used it whenever possible to cut down on my cooking time because time is something we dont seem to have enough of. I have baked a lot of different items in my microwave, chickens, all kind of casseroles, cakes. You can even scramble eggs in this one!! It keeps dishes warm until you decide to serve it which is a plus because all microwaves do not have this option. I believe you will enjoy it too!

After being a faithful Whirlpool consumer for years... I no longer have any faith. I purchased an entire kitchen suite. The side by side refrigerator Nov 2013. The first refrigerator was delivered with the side cabinet deeply dented in several areas. Another was delivered 4 weeks later. Silly me... I thought, Okay, no big deal... what could go wrong? I didnt take time off work again to receive the replacement. My son took delivery (never looked at it). I get home... the front of both doors looked like they had been kicked in all the way across! To add, the cabinet sides were textured (not smooth like what I ordered) and the door handles didnt match the other appliances. So, I called HDepot & called Whirlpool (only to be on the phone an hour each time due to high call volume. Imagine?). Then Whirlpool reps are talking to me like I am some sort of idiot... saying that the refrigerator was EXACTLY the same... not possible that the handles or sides were different!!! Because it was damaged (and I mean ridiculous! ) another 8 weeks for a replacement. Frig #3 arrives and I take time off to receive it. Ah, the right refrigerator... but again ~ handles dont match. Not POSSIBLE.. Ms. _ _ _ _... it is the exact refrigerator, those are the same handles. Hours and hours on the phone to HDepot and Whirlpool. Finally, HDepot rep has a WP rep at the store when I call, and bingo! Oh yes, there are two styles of the Exact same model. The handles are ordered... 10 weeks later I finally have matching handles! But, wait... gets better. The fridge has been loud from the start, CONSTANTLY running but, not cooling some areas and freezing in others. Then when you open the freezer it is like a burst of winter wonderland is unleashed in your face. There are sheaths of ice building up on the top of the inside door. Hmm, I think what is going on? The Whirlpool designated repair company comes out. Ah, well here is part of your problem. When the refrigerator was being put together they left a few thicknesses of blue packing tape between the door and the rubber seal in the freezer. The rep tried to fix it to no avail because the door was also warped. First they were going to replace the door. Waiting for another 10 weeks. Nobody calls, whats going on? Oh, never mind, or rather... that was never happening. I have spoken to many reps with Whirlpool, I have been polite with all. In turn, from most I get curt hard ball back. The offers to resolve this from Whirlpool have been ridiculous. I am sorry for my loyalty to Whirlpool, as it has not been reciprocated. I have had two more deliveries - both the wrong unit! I never thought there were others out there. What a mess. They should recall.

I purchased a Whirlpool Cabrio washer and dryer. They work well but the washer underneath lid has rusted already. I did purchase the washer in Dec. 2011 and in June 2012 the inside lid to my surprise had rust on it. I called the Whirlpool company and was told that is considered cosmetic and not covered under warranty..

I purchased a #Whirlpool; 4.3 cu. ft. Mini Refrigerator Stainless Steel BC-127B from @Target. There was a delay putting it into service (6 mos), so the Target store warranty was expired. The unit remained in its factory shipped packaging until put in service, so nothing out of the ordinary there. After barely two weeks of use, the compressor died. I followed all instructions (including waiting 8-10 weeks) from Whirlpool, but still have not received a refund or been given any information beyond we escalated it to our warranty team but havent heard back yet. The unit was a poorly made piece of junk in other respects as well. There are dozens of complaints about precisely this - defective units - on any site. Do not be fooled by the dishonest way that #Targets website lists reviews. Dig deeper.

Everything Whirlpool that I buy is junk these days! Whirlpool used to be one of the best brands, now, cheap China GARBAGE! My dishwasher will not fill enough to clean the dishes without setting it on pots and pans. Then it runs for hours and uses a ton of electricity! I tested the water fill cut off, after it fills it is not even close to lifting it and the switch works fine. I returned the Whirlpool dehumidifier I bought recently, it was junk as well!

Its awful! We paid over $600 for our Whirlpool Gold Series convection/microwave clean release oven (model GMH 6185XVQ1). It worked fine for 12.5 months at which time it started clicking and, after a final zapping sound, would not heat anything at all. I called Customer Service, Oh, so sorry, its past its one year warranty. I was finally transferred to Escalations then to the supervisor of the Escalation specialist. Finally, we negotiated that I would pay for the service call ($129) and they would pay for parts (which were around $300 for a fried magnetron, diode, and something else). That repair was 6 months ago. Today while heating a glass of water in our microwave, I heard the familiar zap and no matter what, the microwave will not heat anything. I called Customer Service again, figuring the newer parts were still under warranty. Wrong. The newer parts were only covered for 90 days. This time, they tried to sell me a service plus package. For only $289, they will re-warranty my microwave for 1 year after they come out and fix it again (cost on me). My other option is to pay $129 again for another service call plus any parts (which Im sure will be about the same as last time. I will never buy Whirlpool again! Buyer beware!