Whirlpool refrigerator runs continuously, but doesnt cool. I have to turn it off manually to cool down the motor. I have to run it on the highest number (5), then freezes some things on the top shelf but lower shelves are warm. We need these refrigerators and freezers replaced with different brands of our choice!

My husband and I purchased a Whirlpool over the range microwave in 2005, model number MIX155XHPT-1 and serial number TR S 30 32419. At first the top vent broke then the opening side broke off. Then the whole side of the closing door broke off. Now the whole door wants to fall off. I would have never expected this from Whirlpool, but it happened.

We got a brand new bottom freezer french door Whirlpool refrigerator in our brand new apartment. Since we moved in last week the temperature control in the refrigerator box has failed three times. The freezer stays cold but the coils are frosted solid and no cooling gets up to the refrigerator box. We turned on moisture control but that didnt help. The users manual is completely useless and in fact doesnt even match the control panel. The numbers for temperature settings on the instructions dont match the numbers on the panel.We had to turn off and thaw out the unit completely three times already and this is just the first week! Last night the building maintenance guys came in and sprayed the back panel of the freezer with warm water. He said he talked to the GE tech, who suggested we also increase the freezer temperature settings to 4 and the refrigerator to 44. But this morning the temperature rose again. It sure sounds to me like the daily defrost cycle isnt running at all and nobody wants to consider that possibility. Thaw the unit several times a week is completely ridiculous. Our food has experienced so many temperature excursions who knows whether its any good now. I cant wait to get my first taste of salmonella. This is what you get when you combine junk with poor service.

We have had our Whirlpool range for probably 20 years. We have never had any issues or problems with it. Our washer and dryer are both Whirlpool too. I would recommend this brand 100%! I think this is the brand that my mom always had too. Their products are very well made and last forever (it seems like they do!).

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

I bought my Whirlpool water heater from Lowe’s in 2010 and now 2 years later, the pilot light keeps going out. When I tried to buy replacement parts from Lowe’s, they stock parts for other brands but no parts for the brand they sell. The water heater is junk and Lowe’s is no help. I will not buy from Lowe’s again.

I bought a Whirlpool Cabrio 1.5 years ago and it has already died. Repairman need to replace the control board which had gone out. $450.00 to replace that piece, but could not guarantee that it would be the only problem. The motor or some other issue may have caused the board. This machine was purchased at Home Depot on sale and at $450.00 to repair would be approximately 70% of the original price. It will be cheaper to buy a new one rather than fix this one. We were not happy with this machine in the first place. It leaves the clothes stained with a white powder that never rinses off. The cycle time is very long, up to an hour to wash a load. The clothes are still very wet once the cycle is finished, which of course increases the drying time. I cannot recommend Whirlpool top loaders after my experience with this machine.

Whirlpool Gold French Door - I purchased this fridge in Aug. 2009 (model GX2FHDXVQ00 22cu. ft. French door with bottom freezer). Paid 1800.00. The fridge stopped working after 5 years, but the freezer works fine. A fridge should last at least 10 years. I wont buy another Whirlpool appliance! JUNK!

I have had my Whirlpool Washer for many years. It agitates well and my clothes are always clean. They are easy to dry. The wringer wrings out all the water, yet they stay damp for ironing. You will love this machine. I am happy with it and hope it lives for a very long time.

We bought our washer, dryer, stove, microwave, and dishwasher in September of 2010. In 3 years we have had to replace our Whirlpool over the stove venting microwave, have spent over $550.00 on repairs on the Whirlpool refrigerator, and now have to replace our Whirlpool Cabrio washer. This of course does not include our time, effort & frustrations, especially with Whirlpool customer service. Will NEVER buy Whirlpool again. Were all for a class action lawsuit.

Without a doubt, the worst washing machine Ive ever owned. After 15 years, my trusty old Maytag finally quit, so we searched around and ended up purchasing the Whirlpool Cabrio Platinum 3 years ago. In that time, the hinge on the lid broke, and now it makes a deafening noise when spinning. We called a repairman and he said the bearings were bad and needed to be replaced... Total cost $275 plus $50 for fixing the lid. When we told the repairman that it was only 3 years old he couldnt believe it! We decided against fixing it because from the start it never got the clothes as clean as we were used to, and without the agitator post in the middle, which was a big selling point by the salesperson who sold it to us, the washer continually stops with an Uneven Load message. Large load, small load, it doesnt matter. You cant do a load of any size without the load becoming uneven. We are now searching for a new washer, and although I dont know what well buy, I can guarantee it wont be a Whirlpool.

Worst appliance we have ever bought. Our last fridge (also stainless french door) we had for about 14 or 15 years and only the door bins cracked that we put gallon milk jugs in (dont do it - they are too heavy and get warm from the door opening). This fridge is a piece of junk. We were told it was stainless - rust spots started appearing the first year. The deli drawer lid broke within a month or two, but I didnt care about that so I just threw it away. The ice machine stopped working a little after the first year. Today however is what got me to write a review - I spent a couple of hours trying to duct tape and make wood supports to hold up the frame for the produce drawers - one of which is totally cracked when it fell from having the support break. While doing this I noticed there are hairline cracks on the front of all 4 of the shelves! Also, this one has a wire basket in the bottom instead of a full drawer - probably more supportive, but it means stuff constantly falls into the bottom of the fridge and it is extremely hard to get in there to clean.

I bought a Whirlpool Cabrio Platinum washer 2 years ago and it is by far the worst washer I have ever owned. Its a water saving device with extremely long cycles. The clothes dont get wet enough, dont come out clean and they do not smell fresh. I have to put them through 3 rinse cycles and often times have to re-wash my clothing. The cycles are very long, using more electricity, and it takes me 3 times as long to get my weekly laundry done. My clothing comes out more wrinkled and twisted causing longer time ironing. My old agitator style washer did a superior job compared to this piece of junk. I dont like the automatic locking lid, nor do I like the machine choosing the spin cycle for me. There isnt even a soak cycle. If I want to soak my things I have to do it in the sink and then drag them to the washer to rinse and spin them.I spend a fortune on laundry additives in order to get my clothing clean and then they arent as clean as with my old washer. I now dread doing laundry and every time I look at the washer I feel like taking it to the dump! There isnt anything I like about this machine and I wouldnt recommend it to anyone. It is a piece of crap. This is 2016 and they havent learned how to make a good working washing machine. When I move, I will be celebrating leaving it here! I will never, ever buy a product made by them again.

As a consumer, Im very disappointed in this Whirlpool Cabrio Platinum washer. It does NOT clean your clothes. Many times Im washing my clothes twice, only loading a 1/3 of a load of laundry in it because of this problem. No matter what you do, it just doesnt clean your clothes. Has anyone considered putting a law-suit against the company. They will NOT stand behind this issue, NOR replace your washer with something that works. Maybe that is what it will take. DO NOT ever ever ever ever ever ever buy this piece of crap washing machine. You will waste your money, your time, your extra detergent it takes to wash your clothes AND the cost of the machine too! The MILDEW SMELL is horrible and no matter what you do you CANT GET IT OUT! Ive tried it all. Im just angry because I had to save money to purchase this set and it is a piece of crap! The customer service is just a runaround, they wont help you! They will just give excuse after excuse. They need to replace EVERY ONE of our washers with something that works!!! For the cost of this machine alone, they should do something to resolve this issue!

I have owned the machine for 1yr and 6 months, bought new from reputable company. The washer always had kind of a clunk sound which the manual says is normal. Clothes would have white marks and streaks after was but disappear when dry. Clothes would seem damp, never like they were completely washed. Went to do a load last night and thats when it stopped working. Powered on, cycle selection was fine, lid locked, typical clunk noise, then nothing, no water. Paused the cycle, lock lid light flashed but didnt unlock. Machine powered off on its own and unlocked. I powered it back on after 30 minutes and it wouldnt let me change the cycle, panel selection was frozen. So I powered it off and contacted repair. They think its the water inlet? Pending repair to see for sure. This is not OK! I had an older machine from the 90s that was still working before I bought this one. So sad to have this type of product from this company.

I purchased the front load washer 4 years ago and the board went bad in 2 years. It costs more to fix it than the washer is worth. Stupidly, I purchased the top loading Cabrio and it has gone downhill from there. Has always sounded like a jet taking off in the spin cycle. Then 18 months into the purchase, it started with grinding noises and load balance issues on the spin cycle. Seems like they have a lot of issues with these Cabrios. Spent a lot of money for nothing. I will never buy a Whirlpool again!!!

This microwave usually has great reviews but I think I just got a dud. I purchased this model (WMH53520CS-0) as part of my new home build. After 9 months the door sensor broke and anytime we would go to run the microwave, it would tell you to open/close the door. Whirlpool sent out a certified factory dealer to fix the problem. They found it to be a faulty control panel and replaced it. After that was replaced, the exhaust fan broke. Whirlpool sent out that dealer again with the new part, and everything was working perfectly. Flash forward a whole 24 hours later, and the microwave would make the loudest sound ever and shut off after 3 seconds and blow the fuse. Turns out the turntable motor had broke and the NEW control panel was already faulty.The turntable motor part was on back order for a month and I am still currently waiting for it to be shipped to me while I have a microwave shut off collecting dust. As most anyone would be, I was extremely frustrated knowing that Whirlpool has spent at least 4 times more sending out certified dealers and replacing parts, than if they were to just order me a new microwave. They stood firm on their policy even if it meant a customer without a working microwave for over a month. Whirlpool did offer me a nice $75 debit card that took 4 weeks to arrive to help pay for a temporary microwave, but they would not work with me when I asked for the warranty to be extended 3 or 6 months. I wanted that peace of mind and its frustrating that for 2 of my 12 month warranty, the microwave was completely broken.Overall, its a nice microwave when its working but with all I have had to go through, I wouldnt recommend this model nor any Whirlpool appliances...

I wish I could give negative stars! My Cabrio Model #WTW6600SG2 sounds like a jet airplane on the spin cycle (this started 2 months ago). Now, Im getting the UL error, its not an an uneven load!

I have had no issues with my washing machine. Love the different settings. Washes clothes well. Dryer has minor issues like the drying dial stopped moving so I need to manually turn it off. It’s more of an inconvenience, but for the price it should work.

My induction cooktop totally failed to work two months after installation. Whirlpool sent a repairman who told us it was the main board. He also said he was unable to locate any of that part anywhere in his computer. We called Whirlpool via our store, Ikea. They apologized, asked for 48 hours to locate a part, then said they would replace the cooktop if they were unable to find out. Almost 48 hours later, they hadnt located it and denied any replacement option. The parts cost is over $800. The cooktop cost just over $900. Whirlpool reps would only read from a script of legal warranty jargon. Then they said they needed 5 to 7 days. We had a baby visiting - we needed our stove. To me, an apology would be replacing that unit if the part wasnt available, not a verbal statement. Fortunately, we had the phone # of a local Ikea manager who told us to bring the cooktop to the store as they had them in stock. They replaced it with a new one. Over the years of my long life, I have bought many Whirlpool products. Never again. I need a washer and dryer, and will not be purchasing any associated with the Whirlpool Corporation. Thanks to Ikea, though, for standing by their customers.

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

I had an upscale Frigidaire suite of kitchen appliances and I loved them. A few years later I moved and needed a new set. I thought Whirlpool was about the same and I bought a Whirlpool set. The stove wont boil water or even fry an egg. It heats up and cuts off continuously. I called a service rep out and he called the engineer who told him it is designed like that and I need to use hot water on the stove to boil it. I was shocked at his ignorance and insulted by his stupidity. Ive been cooking for 60+ years and everyone who cooks knows you use cold water to boil water. But really, the stove does not cook anything. When frying eggs the burners cut off every few seconds to the point you cannot cook anything with it and the engineer said thats the way they designed it. DONT BUY WHIRLPOOL. THEY WONT EVEN BOIL WATER. HORRIBLE STOVE AND ONCE YOU HAVE IT YOU ARE STUCK WITH IT.

I bought it 3yrs ago, and it give us headache, only two weeks used and it stops working. We call their service center and have them check, findings is the motor not working and have to replace, we are asking them to replace it with new washing machine, but they only replace the motor, what we cannot accept is that they replace it with a surplus motor. Only two weeks used and they replace only surplus parts!!! Damn. What a bad experience... (The motor they put is noisy too)! After a year the spring hinge collapse and have to fix it again. And now my washing machine is like a helicopter when spinning, shaking and moving around our laundry area... I dont want to buy Whirlpool anymore.

I do not know if my mail would be read or not, but I am writing it just to my satisfaction. I am a doctor (dentist) living in Haridwar. I had bought a Whirlpool fridge around 2-3 years back. I am not sure about the date. I have the bill. I will have to check the exact date. So around 3 months back, the fridge stopped cooling and I lodged a complaint in your customer care center. The engineer turned up, and he said that the compressor was not working and the company will change it. We only have to pay for the gas to be refilled. I said ok. Everything went well for nearly 3 months, then again one fine day, the cooling stopped. I called the companys customer care, and they gave me a complaint number and customer satisfaction number. But nobody turned up for 2 days. I called and called, then after much calling, a guy from the company came and said that the compressor was not working and they have to change it but that it will not be possible for 4 days. After 4 days, he will come.Sir, can you live without a fridge for 4 days and not getting the guarantee that it will be ok in the next 4 days? So, I went to the market bought a Kirloskar compressor, got it fixed, and got the gas filled; and the fridge is working fine now on the same day. This cost me nearly 4500rs, but I am happy that I have solved the problem. Till date, nobody has come to see my problem; and to my utter surprise, I received an SMS from Whirlpool that the customer is not willing to pay. Ha ha ha. My fridge is a double-door 280-liter fridge. What should I do?

I have had my washing Machines since 2011 and have had continuous problems with the washing machine during spin cycle sounding like a freight train going through my house. Whirlpool has had people to my house 5 times to fix. When warranty was up in 2012, I was told they would continue to cover this particular issue. They came out again in April 2013 and now I am being told, Too bad; if you want fixed then you will need to pay for it.

We bought the Whirlpool Gold series side-by-side about 2 years ago with an ice maker in the door and with this design, the ice bucket is on the inside of the door, which we thought was a very clever design, taking up less freezer space. Well, to remove the ice bucket, we had to use a blow dryer because even though you press the button which is supposed to disengage the bucket from the door, it has always been frozen onto the base.Then we started having issues of water leaking from the ice maker. It turns out, that the lever that controls the chute was broken. We called a certified Whirlpool technician to come out to fix the ice maker dispenser lever. Well as it turns out, it cannot be fixed. It is a sealed in the door unit and to fix it, we have to replace the door, a repair estimate for door and labor is approximately $800. That is absurd.I contacted Whirlpool and was told that my refrigerator is out of warranty and that there is not an option to repair the dispenser. There is nothing we can do. I said that according to the repairman, we are not the first to report this problem. When I contacted Whirlpool I was told there is no recall for this item. We purchased the Whirlpool based on the reputation that it has had in the past and the good product we have in a Maytag (which is associated with Whirlpool) dishwasher. Well, never again are we going to purchase a Whirlpool or any of its subsidiaries products. I have read so many unhappy customers here that I cannot believe that Whirlpool continues to make such inferior products or designs.

Thirty minutes into running the oven self cleaning cycle for the first time, the middle pane of glass exploded! Weve had this range two years 4 months, and didnt buy the extended warranty. I contacted Whirlpool and they acted like this was the first theyve heard of this. I inquired on the class action law suit in New York from 2012, the year we bought ours, and they had no comment. They were willing to sell us an extended one year warranty and we pay for the service call for only $332! I declined and will never buy a Whirlpool product again.

Whirlpool corporation is one of the worst company Im dealing with, we bought a new home and had new Whirlpool appliance incorrectly installed in Sept 2018, I raised a ticket in Oct 2018 for my dishwasher which doesnt open properly, flamingo services in Atlanta came and unplugged dishwasher saying its not installed properly. I wait for more than 30 days for parts to arrive and my dishwasher to be fixed. Called Whirlpool/Flamingo. Both dont give confirmation as to when the parts will arrive (note they havent been shipped by distributor). Wow seriously??? Please Im already facing inconvenience since more than month on a brand New appliance. They say no compensation no replacement. Only I will have to wait indefinite time for dishwasher to be shipped and repaired. So much of inconvenience and customer service says she will not call me back and I will have to follow up? What service is this, infinite wait??? Mine is still in warranty, #Georgia #cumming

Im a member of Costco. I trusted that they will sell me a decent refrigerator, wrong! I bought a French Door refrigerator by Whirlpool on March 2018. It freezes my food on the left compartment and on the middle compartment. I called since its under the one year warranty. They came 8 times already and changed parts and promised me every time they came that this will resolved the problem... still the same. I have been in the phone with Whirlpool for one hour and a half for 5 times and they still want to do more tests. I will never buy another Whirlpool unit again! Costco should be ashamed of selling this brand! And they should paid for this also.

Whirlpool Cabrio Washer WTW6200VWO & Cabrio Dryer WED6200SW1 - My Cabrio washer ties clothes in knots but the big issue is that if it goes to UL (uneven load). There is no alarm. Washer stops all operations except one. It fills up over the top, all over the rec room, out the door and down the street until someone alerts me! I run down, hit cancel and it drains. I unknot the clothes and start over. Then I mop up! Help! My Cabrio dryer has been through four door latches and I finally realize that the issue is that the latch and the protruding part do not line up evenly. This breaks the latches. Help!

Never ever go for Whirlpool. It has the worst customer service. We brought an oven but accidentally we broke the inner oven plate. We called up the customer care person on 18002081800 and tried asking him the dimensions of the plate pr at least how we could reorder it. He never listened to us. He just got our details. Said that technician will come at 11am tomorrow and disconnected the call when we were trying to explain what our query is all about. Is that all the respect a customer deserves!? Is that how whirlpool trains their service people!? He doesnt even have the basic courtesy to listen to the customer, I wonder how was he even recruited as a customer care person. If you want at least your basic respect, please DONT BUY WHIRLPOOL.

Purchased a Whirlpool French door in April 2020 during the pandemic for 2K. The first week of owning it my fresh vegetables froze. I lowered the factory set temperature by one degree. The next week the ice maker stopped making ice. 3 days later it started up again. The 3rd week my freezer food defrosted and the ice maker stopped making ice. Called Whirlpool And requested a refund. They said, No we will send a tech. The tech determined the control board was defective. I had to empty the entire fridge and turn it off, defrost it for 24 hours. The headache to find someone to take your food! The part took 2 weeks to get replaced.The tech said, If this doesn’t work we will have to come back and take the back off to see what the issue is. Told to defrost again for 24 hrs. The ice was so thick we did it for 48 Hrs. 1 week later ice started to form in the freezer and the ice stopped working again. Called whirlpool demanded a refund and they said no. A tech will come again. I’ve relocated my food 3x already. How many more times can I do that! Whirlpool is not concerned about their reputation at all, as I read through other reviews of situations similar to mine. Do not buy whirlpool!

I purchased a 50 gallon Whirlpool water heater, model FG1J5040T3, in November, 2005, and have had the same experience as reported by the hundreds of others, whose comments I have been reading. Basically, pilot wont stay lit. I called Whirlpool, relight the heater, when it doesnt relight, wait to receive repair parts, call a plumber, and pay to have them install it, then repeat same problems. Each time going for a week or so, without hot water.After relighting the heater 10 times in the past year, and service calls, Whirlpool authorized me yesterday to return it to Lowes, and get a replacement. I need to hire a plumber to unhook it, haul it to Lowes, get the new one, and install it. It cost me about $300 to $400. Will the replacement be any better? I am considering just replacing the heater with one made by Rheem.

In 2099, I purchased a Whirlpool Gold from Lowes. It has never cleaned my dishes, especially the pots and pans. My dishes also have a powder coating on them after various cleaning cycles that I have tried. I have tried every detergent available.The repairman suggested a detergent, which I already tried. He told me that the dishwasher uses only 1.9 gallons of water in total. That confirmed what I thought the problem was, not enough water! It is a design problem that cannot be fixed. I have bought Whirlpool for years but not in the future.

If you are considering a Cabrio washing machine, save yourself the aggravation and buy something else. I purchased a Cabrio model WTW5640X from Lowes 2 years ago. It has been one disappointment after another. First, the clothes were coming out really wrinkled and not fully rinsed. I now routinely use the extra rinse cycle. I also started washing very small loads with hardly any soap (and yes, I use the HE detergent). That works for me, but its not practical for a household of more than 2.This machine is also not for anyone with kids or who expects to remove routine soils. It doesnt clean well. White socks start looking dingy after a few washes, and even the hot cycle with bleach doesnt get whites white. Now, the washer has started shutting off with the clothes still soaking wet. I can press the Drain & Spin cycle to get it finish the job, but that adds another 13 minutes to the 63 minutes it already takes for a regular cycle with the extra rinse. I so wish I had not replaced my 15 year old Kenmore.

The machine is reliable, does not take forever to do a load, it is relatively quiet. It has sufficient options depending on the size of the load. Additional options are time setting, choice of warm, cold or warm/cold water settings. On light and medium loads it extracts almost all of the water; on heavier loads an extra dry spin does the job. In all the years that we have had it, it has required only one service call. The maintenance man told us that this model is the best in a series and he recommends that we hang on to it for as long as possible. We're very happy with it.

I cant even tell you how disappointed I am. This washer has destroyed my clothes and towels. Ive tried to reach out to company but they want me to call for service. What would I call for? Washer works, it just makes holes in clothes, in towels. There are so many complaints about this. If anyone know how to begin a process like this, please let me know. Trust me, when I write a review about something, its got to be either really good or really bad. I dont have time to write things like this.

My dishwasher quit drying and washing in hot water at Thanksgiving 2021. I could not get someone to look at it because the repair company (for Whirlpool) could not get to it until January 2022. The repair tech said it was it could be three different things. He was going to order all three parts. Three weeks later, they came to repair it. It still didn’t work and I hate to wait two different days (all day) for service. First day, he didn’t make it so had to schedule for next week. He replaced the other two parts. It now works by still doesn’t dry like it should. Not thrilled with performance at all!

I purchased this Whirlpool Cabrio Platinum washer on 12/1/12. I started getting an F1 fault and all the lights on the machine light up like a Christmas tree during cycles now. I thought I would research Google to see if others were having the same problem. I was VERY disappointed to see all of the same issues others were having with this high end washer. Without even calling a repairman, I know that this motherboard fix is $400+ based on all of the negative feedback. We have a large Whirlpool plant in my hometown, and I hate to see the lack of resolve by Whirlpool.

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

I owned a Whirlpool water heater and the only thing I have with it is problems! The pilot keeps on turning off. Since I am a 64-year-old lady, I have no idea on how to fix things (widowed). I keep on paying for the plumber to fix it. It started with flooding all my front yard because of a faulty valve. I paid $165.00. After the pilot went off, I paid another bill to fix that. And it turned off and on again (lost count of times). Today, I found another pool of water (the valve again? ). What a piece of work! Please, can you help me? Im heading to the store to buy a new one, not a Whirlpool!

Duet Washer GHW9150PH0 - The washer is about nine years old. Last year I got the dreaded F-11 error code, and had to purchase a new controller board and install it. Now the spider arm on the basket has snapped (cast part). Ive been on the phone with Whirlpool for over a half hour now, and all I get is We have to send a service tech out, and you have to pay for them. I have the broken part in hand, I know the Whirlpool part number, yet they want me to pay for a tech to come see the part and confirm it. Ive been unable to talk to a manager yet, none are available.Eventually the lady agreed to replace the broken basket, after telling me at least five times she could not, but she refused to replace the tub which was destroyed when the basket broke. Ill be calling back to talk to another agent soon.

I bought a Whirlpool duet washer and dryer. These appliances are still under one-year warrantee. My washing machine was broken for four weeks, and they have been unable to receive all of the parts needed to repair it. They have made three appointments to fix the machine, telling me that they have the parts and only to cancel the appointment the night before. I have tried to get Pacific Sales to exchange the broken machine, but they will not do that or compensate in any way. This is a top of the line model; I would have been better off with a low-priced model, and I might actually have a machine that worked. Whirlpool supposedly had the parts on back order, which is not what Whirlpool informed me when I was able to reach them.

I purchased the French Door refrigerator only 7 months ago. It has been emitting a low pitched, loud, vibrating hum for days. I called the company and spoke with a well-trained representative who informed me that there needs to be a service call. When I mentioned that this did not indicate an acceptable situation for future dependability, I was pitched to purchase an extended warranty. Further… this company doesnt monitor Consumer Affairs. Quality and standing by a product are manufacturer qualities that were not evident during the call.

My wife and I purchased a brand new dishwasher less than a month ago. It stopped working after less than a month. After waiting hours on hold, the service company they sent out, went out of business before the appointment. Now after 3 months of nothing but frustration. I have written many emails and none have been replied back to. Worst customer service ever!! Not not buy Whirlpool or Kitchenaid (same company).

We purchased a new Whirlpool Cabrio washer, model #WTW6340WW0, and dryer unit 2 1/2 years ago. We did our research online; Consumer Reports got great reviews everywhere. We went to Lowes and was told that this set (washer/dryer) was the top of the line in top load washers, so we purchased it. Now 2 1/2 years later, our washer is out of service, bad power board is the suspect and maybe the pump. I have heard that there may be a class action lawsuit coming down the pipe against Whirlpool and would like to know more info if it is. We paid nearly $1,000.00 for the washer and like other complaints, we were led to believe that we would get 10-14 years service out of the unit. But that did not happen. I think Whirlpool, Consumer Reports and Lowes should all be held accountable for misrepresentation. I can assure you that all of their executives received attractive bonuses for misleading the consumer. I would not recommend Whirlpool to anyone, Consumer Reports nor Lowes.

We bought a Whirlpool model WFW5620HW front-load washer at Lowes. The unit shook so violently during part of the spin cycle that the Whirlpool-authorized service company technician said not to use it while parts were ordered. It seems the balance ring was not functioning. Parts ordered were shocks and tub assembly. The technician suggested trying to get a whole new unit, as the repair is so intensive he had only done one or two in his career.Whirlpool customer service said they would not replace the unit, and an escalated request had the same response. I think this is terrible customer service - when there is such intensive failure in the unit, they should provide a brand new machine. The work has not yet been done - we are without use of a washer for an unknown period of time, since the order of a tub assembly is so uncommon that they do not have a time estimate. Needless to say, we will never buy Whirlpool again, and suggest you do the same.

We bought our stainless and black Whirlpool stove last month. We love that its black topped, and doesnt show dirt. We love how the oven door seals, and the fast heat. What we do NOT love, is how easily the knobs turn. You barely brush against them, and gas leaking into the kitchen. I called for service. Our guy said yes, they turn easier than most of the stoves he has worked on. He called tech support from my kitchen, and I overheard the guy at the other end. His response was dismissive. I have had gas ovens for 20 years. They have without exception, had a spring type feeling to the knob. This stove has none. I am writing this so that if others are experiencing the same thing, they will see it is not their imagination. Something is wrong with the design of the knobs or some part is missing.

Whirlpool Cabrio - 6 Big Problems: I dont write bad reviews on anything but in this case, I feel I have to warn potential buyers. Ive owned this washer for more than 4 years. Here are the problems: 1) This washer TEARS HOLES in my towels; 2) It SHREDS some clothes; 3) Loads are UNBALANCED every time I use it, regardless of load type or size; 4) Very LOUD when running. My neighbors can hear it and they are 150 feet behind us. It sounds like someone is pounding on the walls of my house. BOOM! BOOM! BOOM! I havent seen it, but I believe it might actually be jumping off the floor; 5) Its NOT High Capacity as advertised. Sure, the drum is big, but you cant put much more than a tiny load in it. If you try a larger load, the clothes dont get cleaned; and 6) Whirlpool wont do a darn thing about it. They dont care about the buyer or their own reputation.Our family grew and I thought we needed a larger washer. I foolishly replaced a ten-year old, $300 standard top-loading GE washer that never had a problem, with this expensive **. The GE had a drum that was about 1/2 the size and it washed MORE clothes! The GE never damaged any clothes and it wasnt ridiculously loud like this one. I regret ever buying this expensive washer and I will never again buy a Whirlpool product.

I purchased an Electric Whirlpool Aqualift convection range in November of 2012. This product is garbage! The oven doesnt work well (temperature is always off), the Agualift cleaning method doesnt work well. You have to self-clean to clean it. The most troubling problem is that just after a year of owning it, the finish on the control panel started to crackle. I called Whirlpool, and all they can do is send me a replacement part for which I have to pay for and have installed. My last GE range lasted over 15 years. This range is garbage from day 1. Hate to see what it will look like in another year or if it will be working at all. BEWARE - DO NOT BUY WHIRLPOOL PRODUCTS!

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

I bought this washer less than 2 months ago and I am devastated to say the least as they are not even remotely cheap. Appears that is doesnt come close to using enough water or enough agitation to get even 2 pieces of clothing clean. What good is 5.8cu (largest size tub) if you cant even wash a load sized for non HE washer. I am forced to wash a 1/4 of the amount of clothing now vs my previous standard washer, if I even want half cleaned clothing. I have tried every cycle with no difference.Doesnt use enough water but appears to spend most of the cycle time, filling with water. I know that sounds contradictory, but there isnt really any other way to explain it. Might as well not even have an (agitator), I use that word lightly here, as it does nothing to help clean the clothing inside. Pre-programmed cycles are not enough to do what you need it to do. Because of the pre-programmed cycles, unable to place clothing inside, fill with water, agitate a little and then stop or pause long enough to let contents soak for a while. I really miss being able to do this with my previous Whirlpool washer.It doesnt matter how little or how much detergent you use, the results are always the same, clothing comes out partially dry and dirty. Usually requires 2 or more wash cycles to remotely obtain clean items. Most items never even go under the water, no matter how much water it decides to fill with. I am so disappointed with Whirlpool with this fiasco they call a washer, with their name on it and they should be also. I have never owned any other brand than Whirlpool, so I didnt hesitate to buy this set, as I had wanted them for several years and finally made the decision to purchase and what a mistake this was. Will never make this mistake again. Whirlpool needs to correct this for every customer that has purchased these washers or risk ruining their reputation.

We got what was a top-of-the-line Whirlpool Refrigerator about 10 years ago. It is still running, BUT all of the drawers have broken at least once and the door shelves no longer work. The replacement cost for each item is ridiculous especially considering how flimsy the items are. We decided to look at Whirlpool Refrigerators since the one we have is still running. They have changed absolutely nothing in the drawer or door design. It is all still very flimsy especially compared to the competition. I would strongly advise anyone looking for a fridge to look elsewhere, since, obviously, the quality of the interior is not a priority at Whirlpool. Avoid Whirlpool Refrigerators. The drawers and drawer shelves will ALL break since they have put no effort into fixing obvious defects.

I washed my expensive sheets in the washer on deep water... hot and filled up the bleach dispenser as instructed... My sheets came out splotched and ruined... I also keep getting lint on my clothes. This thing just doesnt clean. Im so upset about my sheets. Please dont buy this thing. Also bought Whirlpool stove and paint was peeling off after 3 months. They wouldnt even help me. Im so sorry I trusted Whirlpool.

Water filtration unit was leaking only when someone got water. It pooled into the bottom of fridge and ran out under the fridge and because of the slope of the floor was running back towards the wall. We didnt notice until our laminate wood flooring was starting to swell up. It was probably leaking since the day we bought fridge brand new, but took us 4 months to notice. Whirlpool said they will not fix our flooring, only the fridge. We had to make a homeowners claim which we did. When the contractor moved the fridge back after replacing all flooring it starting leaking from the ice maker unit. Only when the ice tray filled it would gush out water. Our flooring is now ruined a 2nd time and Whirlpool will not fix the floor. Repairman said that Whirlpool used rigid parts in the water and ice maker units and tons of people are having the same problem. Since there is no flexibility in these parts they break when the fridge is moved. Whirlpool sucks and I am fighting with them and Lowes to get this fridge replaced with a non Whirlpool appliance. I will never buy Whirlpool again.

Bearing on washer drum began getting louder at two years. Service man stated that Tide and a few other detergents were destroying the washer bearing seal. He told us that neither Tide nor Whirlpool will admit the problem exists. The cost of repairing the washer is close to the purchase price. Whirlpool should be subject to a class action lawsuit!

Ive got a brand new house, with brand new appliances by Whirlpool. Within less than 6 months, my dishwasher, Model no. DU1015XTXB0 Serial no. F00702058, had its electronic board gone bad. Instead of replacing the dishwasher, Whirlpool replaced the part. Not even one year later the same part went bad. Now, the dishwasher is not even 18 months old and it will cost $255.00 to repair. It is just the two of us in our home and I bought Cascade packets 20ct x 5 at Sams. Im not even done with the packets, so I know 100% that we have run the dishwasher just 70 cycles in 18 months.

I just purchased a top load wtw5000dw01. There have not been any changes to this revised model except the lid only locks in the rinse/spin cycle now. If that even helps anybody. It still has the noisy agitator which is the thing I hate most. Whirlpool engineers better go back to the drawing board and redesign their washers. Whats this country come to when you spend a pile of money on something that sounds like it is broken from brand new. I also had a washer that was 15 years old and never had noise issues or problems with it. Its just not Whirlpool that uses this so called new technology.

After doing much research on refrigerators, I chose the Whirlpool with the French doors and bottom freezer. Within a month, I had to call the repair service. The freezer made a thick layer of ice on the bottom, wouldnt shut properly (I had to keep a heavy box in front of it to keep it closed) and frosted over all the food in it. On his second visit, the repair man told me that the company knows about the problem, that there was a problem in the design of the appliance, and created a piece to be installed in the machine to alleviate the problem. The problem has not been fixed with that added piece, and the repairman has been here a few more times. Now the freezer just randomly stops making ice on top of all the other problems it has. The retailer would not take the fridge back, and I refused to buy an extended warranty for an appliance that the company themselves knows is a lemon.

It has been a great refrigerator that has lasted for years without repairs. As of today, it is a bit outdated but still functioning. I hope it doesnt break now that I praised it.

Water began accumulating on the floor, dripping out of the freezer 16 months from installation. Upon investigating I found the bottom of the freezer had a solid sheet of ice on it. Water was dripping out from the back of the freezer and collecting until it froze. I followed a YouTube video that explained the problem, the freezer drain clogs. The video continued with a how-to dismantle the freezer to defrost the drain and drain the water. Apparently the drain is too small and the fix is a new grommet which costs approximately $27.00. I followed the YouTube video and TEMPORARILY fixed the trouble myself. This is a Whirlpool defect, aka, poor design. What is Whirlpool offering to customers to permanently solve this problem at no cost?

I am waiting for the third repair on my front-load washer. I purchased them a year ago and was very satisfied with the ease of use. But in April of this year, the E2F3 started flashing up after I put in a load of clothes. I called the repair line and they sent a guy to check it. Determining it was a sensor, I waited three days for the repair. Then, almost two months later, now, it did this again. He called WP and they said to replace the sensor again. I waited two days for the repair. Before he left, he started the washer to run through the cycle - no problem. I then put in a small load of clothes, and almost immediately, the washer stopped and the E2F3 was flashing again. I called for a repair, and am again waiting (without a washer) for the repairman to come back on Tuesday!!!Today is Friday. I have been four weeks almost without a washer this year. Thats also the $20 I have spent this last week to wash clothes at the laundromat, not to mention the frustration of waiting for the warranty line to pick up and the hassle of having someone here when the repairman comes. I am glad I purchased an extended warranty for this product, but Whirlpool should make their products to last!

I purchased my Whirlpool Cabrio in November 2009. I am just four months shy of the two-year mark and it is dead! I paid a lot for the machine because I thought it was worth the investment. It was not mistreated in any way! The problem is in the computer part of the machine.Everyone knows that to have a repair person come out is costly in itself, add to that repairs and parts, and it isnt worth it to fix an appliance most of the time. I will never purchase Whirlpool again. Never. I could have bought three cheap machines for this one Whirlpool, and had a couple of backups in the event that one quit on me! Now I have a fancy washer and a mountain of laundry!Thanks, Whirlpool.

Within 10 days of installing our new Electric range the cooktop does not look new and although we have used the prescribed cleaning methods, will not remove some cooked on spills over one burner and another burner has white rings around the glass above the dual zone cooking element. While we did not choose the top-of-line model; had expected much greater durability and appearance for our new range. My call into Whirlpool service made me feel like mine was an extremely isolated case and yet nothing would be covered as would be classified as customer fault. Highly disappointing as the cooktop on the range that we replaced seemed so much more durable.

Fridge is over 20 years old. Definitely got money worth. Need to replace all appliances soon??? Which model next. So many models to choose. Love one with freezer on bottom.

I purchased Whirlpool refrigerator WRF992FIFM00. On December 2016. It was cost $3400 but it stopped working after 6 months. I called Whirlpool for service. Technician came. Diagnosed it and he said he needs two parts but parts are not available. So he asked me call Whirlpool for help. I did call Whirlpool three times and the problem cant be solve. Whirlpool told me have to wait at least 10 days so they locate the parts so they can send out to Whirlpool contractor for repair. They dont have another solution rather than I have to wait until parts have available. I have to thrown all my food and I live without refrigerator. So what the point I need purchase extension warranty if they dont have parts to repair. I would not recommend anyone to purchase appliance from Whirlpool.

I purchased a gold series whirlpool dishwasher on July 20th 2014. Today is Dec 31, 2015, for the past month I have been troubleshooting my dishwasher by myself. Because I had a maintenance man here already since I bought the dishwasher and due to Christmas cannot afford another 250 for another visit. Every time I try to wash, at end of any cycle I have tried using, I open the door and find the cascade soap sitting on the bottom of the tub, the dishes still wet and dirty. So I take them all out and hand wash them, I should not have to do this on a washer that is a little over one year old considering the price tag that I paid for it. I am not young anymore and if I wanted to hand wash dishes, I could have used that money for a nice vacation somewhere.The washer stops, start button blinking, I open it up, check it out to make sure everything looks ok, close it and restart again. It sounds like it is working, so I go about my business and come back an hour later to find the same issue. Dishes will not wash soap on the bottom of the tub again. This has been nothing but trouble since I purchased it. I have never had a problem with my old dishwasher until it got too old. On top of it all, I had to buy another clothes washer from the same manufacturer that now took over. This was only 5 years old and the motor burnt out. I had two maintenance men here from the Maytag/whirlpool company and they filled me in. So I had it hauled out of here and I bought an LG for another good price. It seems to me that it is all about money and they make nothing but crap. Now. I need to make another decision. About this POS dishwasher! What to do?

Whirlpool Cabrio Elite Top Loading Washer Model WTW8240YW - I add my complaint to the roughly 2000 others about this machine and Whirlpool. Two months after the warranty expired the machine started making a loud noise on the spin cycle. I called a repairman and he said it was the main bearing going bad and this was a common problem with this model. He recommended buying a new washer rather than repairing the unit because the cost to repair was greater than what I paid for the washer. I called Whirlpool and all they offered was to send a repairman at my cost. This is terrible service for a documented problem that they have. I will buy a new washer but it will not be a Whirlpool!

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

We bought our washer about 3 years ago brand new from Lowes. Like others, I have had problems with holes in clothing and spots that looked like grease. It worked well up until recently when we noticed some brown splatters on the floor. Shortly after it made a loud noise like a plane taking off and the load would become unbalanced. We researched and found many people were having issues with the bearings going bad. My husband was going to order parts to fix it but you have to have a special tool that is expensive to buy... It was going to be almost $200 to repair ourselves! He called a washing machine repair man and he said he doesnt even touch them because the repair wont last. I guess were going to be better off buying a new washer. There really needs to be a recall on this product!!!

Once again I am disappointed in a product that I felt was of the utmost quality. However after buying in 2010 and not being installed until 2011, the over the oven microwave has a crack on the outside of the door. Two pieces have fallen off from under the plastic rim on the inside of the door, two pieces of the door one on the top right side and the other on the bottom right side have fallen off. All I have to say is the two Whirlpool products I bought at Lowes has been a huge disappointment especially since the other two bought from the same stores are Frigidaires and work beautifully...

I bought a Maytag front load washer on October 24, 2010. I have not been able to use it because it came damaged by the manufacturers. I contacted them by phone several times and it took them three months to send someone (A and E sears repair). Two months passed and I did not get the parts necessary or a replacement washer. I kept calling and finally they sent someone again in May 2011. They said they where going to order the parts because the new company was not going to replace the machine, even though it was already damaged. They said I would get the parts between three-five business days. I only got one part. A and E sent a repair guy again on the 22nd of June. This one said they needed the entire machine in parts and that he would order the parts. I called A and E one week later and they said they were waiting for the on manufacturer to send the parts (Whirlpool). The 26th and the 27th of July, I got the parts. On the 22nd of July, another repairman came and said we needed more parts. Today, August 16, 2011, I called Whirlpool and A and E and now they said the parts wont be here till after October 26, which by then I would have to pay for the parts and labor if I wanted it fixed because by then the one-year warranty would have expired. So here I am with a $700 washer, which was never used and they refused to fix/replace. They sold me a lemon!

I bought a Whirlpool Duet Frontload washing machine and now two and half years after buying it, it sounds like the tub is about to spin out of the machine. The repair man said it would cost over $750 to install a new tub and bearings in it. I thought the product would have lasted longer than two and a half years. I will never buy another Whirlpool product!

I have a new Whirlpool double convection oven which is very noisy. There is a rattle and pinging noise that occurs and the fan is also loud. Im not sure if it is an install or product issue. Can anyone comment on their convection oven? I dont believe this is normal. I am disappointed with my purchase and would opt for gas or basic electric. The double convection ovens were fairly pricey too.

We have had this Whirlpool washer duet 5 years. It regularly rips shirts, underwear, socks, and sweatshirts. Jeans or heavy denim are safe but polos, hanes, or flannel are not. We have been putting our clothes into laundry bags and lingerie bags for a couple of years now to wash safely. Additionally it leaks out the front door. We clean it regularly and it still has mold growing on the rubber gasket - we do prop the door open also. All in all it is a terrible dryer. My previous Maytag was fabulous. I will never buy a Whirlpool again!

I have the Cabrio model WTW6400SW2. I have had it for 5 1/2 years and have been happy with it up until several months ago. The F1 would come up when the machine would lock and just start to fill. I could pause it and start it again, and it might do this 1 to 3 times. It would also do it on the rinse cycle. I have been using it because I did not want a repair bill right now. The machine was also starting to make noise when it was spinning. Well, I just happened to break my dryer yesterday so I thought I would get the washer fixed also. Well, the repairman said that the controller would cost $200 for the part, and then he said the pump roller and bearings were going. By the time you add on labor, he said, “You might want to buy a new one.” He told me that Whirlpool has completely changed the washer now because of all the problems with them. He told me to look it up on the computer, and maybe there would be a class action suit. After reading some of the reviews, I will not buy another Whirlpool again.

I purchased a Whirlpool washer in 2010. It has started to rust. I called the customer services dept. They told me that there was nothing they could do about it because it was over a year old. I asked to be transferred to a supervisor. She told me the same thing. I told her that its not as if Im looking for a new washer. She said that there was nothing they could do; I had to pay for the repairs myself. I told her, After spending almost $1,000 on a washer, I have to pay for the repairs? She said, Yes, maam. I asked if I could speak to someone over her. She said that she had to take down my name and number and someone would call me back in 24 hrs ... from the management team.She asked for my number and not my name and said someone would be calling back. I told her, How are you going to forward the message without a name? Maam, Im sorry. Whats your name? I doubt if anyone will be calling me back. Whirlpool customer service sucks! They dont know how to treat their customers. Watch out for the warranty. What they call a warranty is not.

Very durable. Not pretty but will last a long time. The dishwasher will run forever. The appearance is bland so the product is nothing fancy. It gets the job done. The machine is very quiet. I think this feature is the best one.

I purchased a Whirlpool WFW9050XW washer in Aug 2011. I have had nothing but problems. Sears sent repair tech 2x; it would work for a couple months and stop. Whirlpool has sent new motor, tub, switches, etc. I feel I bought a lemon and I want Whirlpool to replace the machine.

Bought a side-by-side with extended warranty model ED5VHEXVB01. I had a problem with the ice door. They came out, said they saw a bug, left no comments made, received no word from company. Finally, I called them to be informed on the bug problem. They canceled my warranty with no refund given. Now this will be the 3rd time I have to buy. The starter/overload relay fridge is only 4 years old (out of my pocket). I was told by a parts company this problem the company knows about and will not resolve. My advice is RUN, DONT WALK, away from ALL Whirlpool appliances.

I purchased a washing centre at Canadian Appliance Source. I paid to have it delivered, installed and for them to take away my old appliances. I had several issues and when I called the store, they sent me to Whirlpool warranty who dispatched a repair technician a few days later. With nothing solved to my satisfaction, I called Whirlpool again. I spoke to a customer service rep who gave these responses, she put me through to a manager who gave me the same responses. When I asked to speak with someone above her, she said she could put me through to another person at her level but noone at a higher level.I want to hear the same response again? Really? Her only other answer was to email the Whirlpool Executive, which will be my next step. This is a summary only of my experience of the first few days after the purchase.Problem: The first load I washed was 1 set of blue sheets with 2 pillow cases. The water didnt seem to cover the load but I thought when it started to wash, they would get wet. When I took the sheets out of the washer, there were several dry spots and some kind of residue on several areas, so not washed or cleaned as expected. I tried washing one sheet, same thing. Tech solution: Put in some wet items to the load so the washer thinks the load is heavier and will add more water, or add a bucket of water to the load, Really? Whirlpool response: The washer is working as expected. Really? Problem: I did a warm water wash, expecting the machine to dispense a mix of hot and cold AT THE SAME TIME making it warm water. The washer starts with cold water then stops and puts in hot water. I dont want cold water or hot water on this load I want warm as recommended by the manufacturer! Tech solution:Dont use warm water wash. Really? Whirlpool response: Works as expected. Really?Problem: Dryer is way too hot on the delicate cycle, not good for delicates! Tech solution: Use the air dry cycle. Really? Whirlpool response: Dryer is working as expected. Really?Problems I didnt even discuss: The load is really really wrinkled when it comes out of the washer. Who wants to have to go back to ironing everything they own? The washer tub and dryer are really really small! I should have read more reviews and headed the warnings! Comments: I purchased online, biggest mistake. The store will not take it back. Whirlpool will not take it back. Hindsight is 2020! If I could have given negative stars, I would have.

I have always loved the Whirlpool washer and dryer, namely because it is made in the USA, but the newer model Whirlpool is disappointing. The low water machines are not as effective as the older models. Even set on a 2 cycle rinse I get suds in the clothing. The spin cycle bunches up the clothing you can hardly shake them out before adding to the dryer.

We bought a washer in Sept. 2014 and it was used for 4 months before we left and went south for the winter. When we came back in May, we started hearing a loud banging noise so we notified Whirlpool since we were still under warranty. They sent a repairman and he said he needed to take the washer in so he could repair it. They have sent the part out 3 times and they said it was chipped or cracked so another would need to be sent. This has been going on for 2 months that weve been without the washer and today we checked and supposedly another part should be coming. They tell us our warranty is only for parts and labor not replacement. Help would be appreciated. Thank you.

Near the beginning of September I started having trouble with my dishwasher. I called for service to be informed it would be a week before someone would be able to see to my broken dishwasher - which of course is a long wait just for a diagnosis call so decided to call another provider to get my dishwasher fixed in a more timely manner. The repair person informed me that it was the control panel but he suggested we call Whirlpool in order to have it fixed as the part should be covered under warranty. Much to my sadness I had to call again for an appointment with Whirlpool to find out I would wait for a week for a repair person to come out even though I already knew it was the control panel and asked them to order the part right away.Sept. 13 repair man from Whirlpool affiliate comes to my house for about 10 minutes to tell me what I already knew - it was control panel and maybe 1 other part. Cost $99.00 for just 10 minutes - Wow! Then the repair person said he would order the part right away /estimated to be back Monday September 19th great! Two weeks go by we have heard nothing about our part or possible repair of our dishwasher. Call Hurst appliance to see what is happening to be informed the panel is on back order - and they have no clue when it will be available. I should call the manufacturer. Call manufacturer to be told part might possibly be available - Oct 5th - from the United States from somewhere out east in Canada. Who knows? Oct 5th comes and goes as of Monday October 11 have heard nothing about my dishwasher and when it will be repaired - phone manufacturer - by the way which is in Tennessee. What a joke!She says the part is still on backorder but that a replacement part for the back ordered part is miraculously available - she couldnt tell me when that came about, so still have no clue when my dishwasher will be fixed. They have offered to reimburse me the $99.00 service call, but seriously should it take over 6 weeks to have your dishwasher fixed. I still have no clue how long it will take for the part to get here and installed. For 2 cents I would return all my KitchenAid appliances but especially my dishwasher. $99.00 does not appease me. I would like them to cover the labour to fix my dishwasher or a new dishwasher. What garbage and asked to talk to someone higher than the supervisor Gabby of the customer service dept. and was told she is the highest person in Whirlpool I could talk to - thats a joke. Shame on Whirlpool!

Our new refrigerator was delivered on March 28, 2015. On May 31 as I was opening the door, the top of the bottom door handle broke. I was finally able to get a door handle shipped to my home and I replaced the handle. On July 21, I am opening the door and the 2nd handle breaks in exactly the same place again. Two broken handles in less than four months. Terrible design flaw in this door handle. Now, I am being told by a service representative that the handles are only warrantied for 30 days because handles are cosmetic.

I have called Whirlpool multiple times because our washing machine model #WFW9290FW has been out of service for 5 weeks now. I have been informed that I need part #W10604640, which is on back-order and they wont give me any idea of how long it is going to take to get this part replaced. Apparently, there are 96 total people who also need this part. I find it hard to believe that a company this big would not have this part on hand and they would not have any idea how long it would take to get it replaced. I asked them to give me a new washing machine for free to replace it because of the poor service and the unreliable washing machine. They told me they could give me another washing machine at 40% off, but based on the lack of follow-up and the amount of time that has passed since my initial call, I dont want another Whirlpool product. This is the worst customer service ever.

Washer Whirlpool Cabrio - Needless to say now, spin rinse not working, dark spots in clothes, sound like a jet leaving the room and earthquake at maximum potential when working, all previous reviews more than summarize my problem with the washer. How can we do to take a class action against Whirlpool for the defective Cabrio wash and dryer they are selling. If anybody knows, please guide me the right way to start it.

Purchased Cabrio washer in June 2011; in May of 2014 repairman said tub seal was leaking and new bearings were needed at a cost of $400. The washer was still working, but sounded like a freight train, very loud. My trusted repairman said to purchase a replacement, this time with an agitator (the Cabrio has no agitator). 2 additional points : the Cabrio took 63 minutes to wash sheets; other loads required similar long cycles, something they dont mention with new efficient washers. Also, agitators will no longer be manufactured in washing machines within the next 2 years. : (

Whirlpool Cabrio platinum washer (JUNK. DO NOT BUY). As mentioned in other complaints, the Cabrio top loading washer is garbage. Sound during the spin cycle is VERY LOUD because of a bearing noise. The clothes dont even get clean, lint all over dark clothes. I am the only person in the household so the machine did not get used as much as a family would use it. DO NOT BUY THE CABRIO WASHERS.

What a POS. Havent even used the thing to cook a meal yet and already some chunk of metal fell out from the port at the top left inside the oven (behind the vent). It was clearly cheap pot metal. What else is this thing made out of?

I dont know how anybody could write a good review on this machine. It always requires deep water wash and sometimes two cycles to get clothes clean. On regular cycle, it doesnt get water on all clothes. Oh yes, it does save water... Ive pulled things out with dry areas on them.

In 2011, I bought in Croatia, for the start, 2 washers (model 3LCHW9100WQ) and 1 dryer (model 3LCED9100WQ) and opened the first self-service laundry in Pula, Croatia. Since the beginning, I had problems with the gum (black). After the washing cycles, you could see black lines on the laundry. Whirlpool Croatia denied that the gum can be the cause. After two months, they gave me new gums, but the problem still exists. After 5 months of work, the first malfunction on the washers started. The biggest problem is that it took and still takes them up to a month to repair them. And these problems I have ever since. Also, the error codes never showed the correct malfunction code. In global, if I take that I have these washers and dryer for about a year, they were out of function for more than 3 months. The warranty expired in April 2012. On these reasons, I cannot recommend any product of Whirlpool, and I have to change to another company to buy more washers and dryers.

I purchased the Whirlpool Cabrio Washer WT5500XW2 from Lowes on 9/12/2012, which turned out to be the worst purchase of my life. It did ok for over a year. It had always been noisy. Now it sounds like a jet airplane when it is on the spin cycle. This machine is not yet 2 years old. Do not buy a whirlpool washer. They are Junk. Plan on getting rid of this piece of junk and buying a new washer. Dont waste your money on Whirlpool!

We purchased 2 Whirlpool Cabrio washing machines in 2011. Both required service calls in June 2015. After 3.5 years, the repair company diagnosed that the Whirlpool Cabrio model number WTW7800XW2 bearing needed to be replaced for an estimated $650.00 and recommended that we purchase a new machine. The other machine was spewing water out of the side of the machine. The repair person took the machine apart and could not duplicate the problem.

This stove was in my house when I bought it. It has a glass top on it with marks for each type of burner below. There are a couple of different size burners which makes it very useful. The only problem is with the glass top feature. It gets marked easily even when you try to be careful and many of the marks will not come off with anything I have used. The marks are so prevalent that I would never buy another one.

Having a Whirlpool gas water heater for less than 2 years and having a 6 year warranty one would think you are safe to believe this large company will treat you as well as you treated them when buying their product. Think again. No one is allowed or has the authority to issue credit for failed parts, you cant return the product to place of purchase, you are hung out to dry. Whirlpool, I will never buy nor recommend any product you create or sell. I will make it a point to anyone having a conversation about your products just how youre untrained, read by the manual uninformed technicians really are. I will explain just how over inflated your prices are for such cheap engineered to fail products are. Have a nice day.

We purchased a Whirlpool Countertop Microwave (model MT4155) at HHGregg on 6/02/2012. (This was a replacement for another oven that failed after a couple of years - NOT a Whirlpool.) On 6/04/2013, i.e., 2 days past the standard 1 yr warranty expiration, the oven went nuts. I was cooking a plateful of baked potatoes on the auto setting. When the potatoes were done, I opened the door to take them out and the oven started to run! WITH the door open! When I shut the door, it stopped. So the only way to get the oven to operate was to OPEN the door. I dont think this is a safe or effective practice. Knowing it was two days past the warranty, I called customer service anyway just to see what they would say. To my surprise, they (I talked to two different people) were VERY pleasant and accommodating, and offered to cover the cost of repairs and even set up an appointment for the authorized repair person, and then called to verify the appt. as well. Great! I was impressed!The repairman showed up as scheduled and seemed puzzled at first, but he dismantled the outside cabinet and determined the fault was in the door switch. He wasnt sure he had a replacement with him, but he did find one, put the new part in the oven, and re-assembled everything. We made sure it worked and he then left. Fast forward 5.5 months, when again I was cooking potatoes (boiled this time. Maybe the oven doesnt like potatoes!). I had the timer set for 20 minutes on 100%. I was out of the room when it quit cooking, but I think it ran for about 6 minutes and then just shut off and could not be persuaded to restart. The clock continued to count down, and all the other bells and whistles still functioned - it just wouldnt cook. Major hassle. The following day, I was looking at it, messing around to see if I could figure out what was wrong, and discovered that if I pushed on the door latch just a little, the oven would run. Well, thats a nifty workaround, as long as you arent doing any more than briefly reheating something, but not so great if you are actually trying to cook something. I continued to do this for the next few days and then suddenly one night it reverted to the first bad behavior - only running when the door was open. I was able to get that to stop, but the following day, it refused to work at all and it is now sitting here uselessly, just a little over 1.5 years old. I want to go buy another oven (and YES - a different brand!) - my SO wants to repair this one, again. After reading the experiences of others on this site, I REALLY cant see the point in repairing esp not if I have to pay this time (which I probably will), and also when it seems to be a faulty part/design causing this problem. I dont have the time or patience to deal with an unreliable appliance, esp one that I use often. I have not tried to call customer service yet, but Im not expecting great things, not this time. Planned obsolescence? Sure makes me wonder.

It is a double oven. Temp varies too much. The oven is very inconsistent. Cooking Thanksgiving the temperature would not stay even. It took much longer than intended. It was quite frustrating. I would not recommend the Whirlpool double oven.

My son purchased the Whirlpool 2 door w/ icemaker about 3 years ago. Twice weve had a repairman here. Yesterday was the 2nd one. He tried 3 ways to get liquid to go through a round coil I could see at the back. He said the problem was between the two back panels (back of fridge & inside wall) where there was a tubing to release the water from defrost cycle. It appears to be a manufacturing problem. I am very upset! It should be replaced at the very least.

Do not buy this washer. It does not get clothes clean. I use extra rinse (that negates the water savings) and still clothes comes out with stains on them. Some clothes are not even fully wet when removed after washings. I find myself soaking and pre-treating many items. White socks and undergarments are grey soon after buying. I always liked Whirlpool washer and dryer products, but this is a very poor product.