I purchased a Whirlpool oven 14 months ago. I just paid it off 2 months ago. The oven stopped heating. I talked to Whirlpool... and basically because I did not purchase the extented warranty I am SOL. I will never buy a product from them again. Complete junk.

Purchased 29 cu ft French door Bottom Mount Refrigerator 9/5/2013. The ice machine started leaking continual water by August 2015 and by October 2015 the freezer quit working. Have had it repaired once and the second time the repairman said we need a new evaporator and condenser. Called Whirlpool and they said since it is out of warranty we are on our own. According to both repairman this is a common problem with this model (WRF989SDAW00). I understand that appliances break and they need repaired; however, you would think a refrigerator that cost over $3000 would last longer than 2 years. Do not purchase a Whirlpool French Door Refrigerator; even if you purchase an extended warranty, you will still have spoiled food and leaking water to tend with. We have had nothing but problems with ours.

Hi Folks, so today I had the pleasure to speak to Whirlpool regarding a repair bill on our washing machine which now has a bearing failure and estimate to repair was 1279.00. Its 6.5 Yrs old, just out of extended warranty and cost me with the pedestal a total of 1250.00 when new. I explained that in the 6.5 since I have lived at this house where we spend all new Whirlpool Gold Appliances, half have now failed. Range Microwave, Dishwasher and now the 1250.00 front loader is dying a slow and agonizing death with a bearing failure. Just so everyone understands, the estimate is from an official Whirlpool repair service that was booked through the Whirlpool website. Other repair folks just would not bother to look at it when I told them I believe the bearing was going bad.The repair man that arrived was professional and on time. However, I had a hard time understanding how a 6.5 Yr old washing machine would be considered beyond economical repair by costing 1279.00 to repair. Labor was 250.00 which I thought was fair. Time, etc. But parts made up the difference in cost. So later in the day, I spoke to Whirlpool and they offered the equal new washer for what would seem an excellent price. About half off. Wow, I thought that sounded good. So I asked if my existing pedestal would work with the new washer and it did not and I would have to pay for one. Regardless if my old one was fine or not.So, they offered a discounted rate from new at another half off. Total approx 800.00. So, I asked the Whirlpool rep to hold on and I need to check with my wife if she wants the replacement. She uses it as much as I do and wanted her thoughts. She checked the model on the washer and pedestal and with the local Home improvement store, they have it on sale for both units (washer and pedestal) and its about 50.00 less?Consequently, I called Whirlpool back and explained that it does not move the needle to regain my trust as compensation on a 6 yr bearing failure, failed dishwasher and range microwave they offer what a distributor of their product can offer for less as a package? Really? I mean, the Home improvement store is not in the business to lose money. Now, I am having a hard time understanding my own failure to have trust in a brand I used to have with my previous house.My mom had an old Whirlpool washing machine that lasted 25 years before she and my dad gave it away. You know, the old white top loader they used to make back in the 70s. Sheet metal, made a racket and never broke? Oh yeah got the clothes clean too! I dont know what to make of it anymore. So, I will just wait till it dies and take my hard earned money and spend it on another brand in my next house which we are going to move to soon. Maybe I can feel nostalgic and find my moms old washer. Its probably washing someones rags right now and getting them clean. It must be 35 yrs old by now.I dont expect to get anything for free. Its out of warranty, so I need to deal with the consequences, but there are steps the other party can take to help remedy the situation. I think they tried and it was genuine but in my thoughts its just not enough when your local box store is offering the same. When you develop a brand to extend a message of trust in quality and value, you need to have quality and value all the time. I suggested they help with the costs on the parts. I would certainly pay for the labor. Parts cost little to the manufacturer. Unable to help that way. I thought it was cheaper for them too. Guess not. Its come to be a throw away washing machine at 6.5 yrs and I am Infinitely disappointed. I just want my washing machine to work as well as my mothers old one and have the possibility to fix once in a while when needed.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

I purchased a Whirlpool Cabrio just over a year ago. The washing machine does not clean clothes! While under warranty, a service tech came out to look at it. After hearing the problem, he replied that it was a common complaint and that he could not fix the machine because the problem was that it is so poorly made that it simply does not work. His recommendation was to come to terms with the loss of a thousand dollars as Whirlpool would not rectify the problem.Whirlpool really showed their true colors when they refused to cover the repair tech visit. Whirlpool supervisor Kitty explained to me that customer advice was not covered under warranty and that we would have to pay the bill. Highlights of her argument were that we should just rinse the clothes multiple times and they would eventually get clean. She also mentioned that if the machine really did not work as described, we should have complained sooner even though it was still under the one-year warranty. Whirlpool will sell you junk backed with horrible customer service. Beware!

The oven was brand new and the computer went out with the warranty. Replacing the computer, with labor, was as expensive as the range. I have owned several similar ranges made by other brands and have had no major complaints. However, I will never purchase another Whirlpool product again!

It’s just a month old not even - and the dishes are not coming out clean. The cups are stained and I don’t feel it’s clean as it should be given it’s a brand new machine. I would not recommend this particular brand in Dishwashers.

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

I purchased this washer and at the same time had gotten a puppy, I only mention the puppy because she is the one who kept getting blamed for what was happening to my clothes. I NEVER thought that it was my washing machine that was ruining my clothing, until I finally opened the door one day and my shirt was hanging from the top of the washer opening, and suddenly it all made sense! I kept thinking that the puppy was chewing my clothes but it is actually the washer that is sucking my clothing into the opening of the washer and when it gets stuck and the rest of the garment keeps spinning, it creates a burn in the clothing. I found out the hard way that Whirlpool will just blame the consumer for not knowing how to properly follow washing instructions, or their instructions, and will not take any sort of responsibility for it being the washer itself! I wrote to them after my father passed away and I washed his sweater in the washer and it got caught in the washer and ruined it. They blamed me for it and basically said I did not follow the proper washing instructions. I have been washing clothes for over 20 years and I know how to do laundry. I have read every inch of the owners manual and NOTHING tells you that during the wash cycle, your clothes may become sucked into the opening and ruined! So I went online to see if this was happening to anyone else and I was amazed at how many people this is actually happening to! There should have been a recall on these washers and I am amazed there has not been some sort of class action lawsuit.

I purchased a Duet Front Loading Washer (model WFW9750) in May 2010. In September 2011, the noise level had become intolerable. I called a local service company. They advised me that the main bearing was bad. It would cost more to repair than what it was worth. I contacted Whirlpool. They could not do anything unless the machine was inspected by one of their authorized service companies, which they scheduled. Two weeks later, A&E Factory Service arrived and confirmed that the bearing is bad and the cost to repair will be $1,542.06. Whirlpool customer service transferred me all over the country to tell me that the machine was out of warranty and there was nothing they could do.

Purchased a Whirlpool Cabrio 4 years ago. It worked fine until last October when I had to call a Repair Service as all the Digital Controls would not work. It was the Digital Board had to be replaced at a cost of $ 315.00. That was October 2016 and in October of this year 2017 it started doing the same thing again. I call the Repair Service and they told me not to waste any more money on this machine as it is a piece of junk. I guess he was right as when I read all the bad reviews it got today, I realize I will be better off to buy another machine. It will not be a Whirlpool product. I purchased a Sears Kenmore Washer & Dryer back in 1995 and the washer lasted 20 years and I still have the dryer. This is what you refer to as a good product.

We have already filed a complaint but could not get any satisfactory reply. Our washing machine is not working properly & we are very angry with your service. It has created a lot of problem to us. Kindly do something regarding this.

I bought a Whirlpool gas stove (WFG745H0FS1) 2/1/18. The front control knobs (W11122880) position ink began rubbing off after a year. I sent them pics, their solution was to pay $45 each for new knobs.

Our Whirlpool dishwasher works great, gets dishes clean. It is programmable so we can set it to run whenever we choose. It has 3 spinning water spreaders at different levels in the machine, which gets dishes, glasses, pots, pans, bowls, silverware very clean.

My low Budget rental property combinations oven stovetop could not handle it. 1st two of my stovetop burned out. 2nd the knobs broke just from turning the stove off and on. 3rd the oven only works with the oven timer. 4th the was only two years old when it fell apart. I dont recommend this low budget stove.

I bought my 50 gallon gas water heater in December 2015. When kicks on it rumbling. I called warranty and they said We will send tech out but I will have pay the labor. Why do I want pay for a tech if the quality issue is the water heater. Need pay $180 for person come out say its defective. No sense to me. Then when they tell me need new water heater pay them for install. You can check my accounts I used to shop Lowes and will no longer do it because of this service.

Our Whirlpool oven was on fire two different times. The first 10/1/2021 flames inside oven right side. When Flamingo Appliances came to fix the coal was fried underneath. He changed it. Almost 4 months later my stove is on fire again and had to call 911 this time! The back control panel caught fire and is fried. This model has too many malfunctions and is faulty. Whirlpool said they are going to send Flamingo Appliances out to diagnose the problem and see if they can fix it. What next, gonna blow up on me. Earliest they can come out is 2 1/2 weeks. This is unacceptable at all cost. I never had a problem with a stove like this. This stove is faulty. Flamingo appliances/Whirlpool need to realize that the oven is faulty needs to be taken seriously.

Whirlpool gold series refrigerator leaks water from freezer after 14 months because ice builds up causing the door not to shut properly and rime ice forms over food. I called Whirlpool and theyve not heard this problem before and stated I should have gotten the extended warranty. This is ridiculous. The internet is flooded with people having the same problem.

My parents bought a Whirlpool washer machine and the machine was fine for the first two years, then water started leaking from the bottom of the machine and no one has yet to fix the problem! They have the worst customer service department. The A&E worker who came to my parents house smelled, wasted a bunch of time working on the machine and didnt fix anything! The A&E worker visited my parents house over 10 times and the problem still wasnt fixed! They (worker) have ordered parts after parts and still water keeps running from the bottom of the machine! Someone, please help and cut Whirlpool from the stores! Ive spent almost a whole on the phone trying to help out my elderly parents! Its ** and a lot of headache! Never use Whirlpool; theyre all crap!

We bought a new brand Whirlpool, ice berg, 2 door refrigerator in 2006. It worked fine for 6 months and then started giving all the problems. Until now, we have repaired it at least 10-15 times with company servicemen and also private repair shops. We are just so tired and frustrated will all that we have gone through because of this fridge. Today, the main door just came out and it is probably the 16th incident. We are hardworking people and take a lot pleasure and find lot of happiness in buying something new. It took us almost 2 years to save money for this new fridge with cost us about Rs. 20,000. But I should mention this that we have already more than Rs. 10,000 in repairs.I am sure this would just be another email in one of your inboxes but wanted to write this and convey the message that we are hurt. We do not want to take any legal actions as middle class men in India do not have the resources to do that. But I would surely not buy anything of your brand going forward and would not suggest anyone for it. Writing this in assumption that you understand the pain middle class men goes through to but something worth Rs. 20k and spends another Rs. 10k for repairs. We had high expectations from your product but that was not to be.Following were the problems we face in last 4 years: 1. Refrigerator not cooling (5-7 times); 2. Top door broken (1 time); 3. Main door broken (1 time); 4. Water leak problems (5-7 times). I hope someone will read this and forward it to concerned department.

This washer is going back. It simply will not spin the water out of the clothes. It says it gets clothes drier than a conventional washer, but I have not found that to be true. I have to use the drain/spin cycle over and over and still the clothes are wet. I had the repair crew out and they were able to get it to spin out a very small load consisting of two sheets and two towels. Other than that, it does not spin out water. It is also very difficult to load if you attempt to leave the center open as they recommend. The cycles are very long. Not being able to look inside without pausing it and waiting for it to unlock is also a huge hassle. I am getting one with a glass top so I can see what is going on. If you leave it open for too long, it cancels the cycle and drains all the water, and you have to start over which is another problem because all your detergent just got drained out before the load gets going. It uses so little water on most of the cycles that the clothes get totally tangled up with one another. I think you should be able to choose the water level manually. I am all for saving water but if I want more water from time to time, this does not allow you to do that. I DO NOT RECOMMEND!

I have a kitchen collection of Whirlpool products, not even 2 1/2 years old. I have had nothing but issues. Microwave was completely rebuilt within few months, refrigerator and freezer multiple issues. Latest is the freezer stopped working, now my good is ruined!!! Wont always make ice in the icemaker. Already had to replace freezer door because it was warped and the seal didnt work and now my dishwasher isnt working!!! **!!! I waited 20 years for a new kitchen, finally got one and did extensive research thinking I was safe with whirlpool. I was wrong. So now what, what happens when the warranty runs out, Im screwed. Shame on you whirlpool for putting out crappy products and doing NOTHING to try and fix this!!

Purchased the machine in 2008 for $800. I did not have any problems (wash 3-4 loads/week), pleased with the washing until July 2015 when the machine was spinning out of control and the machine moved approx. 1 foot across the floor (thank goodness I did not have it on a pedestal as it may have tipped over). I canceled the run. This was a fine washables load of 5 sweaters placed on a medium spin.Scheduled the Whirlpool authorized service tech to come out and fix. He indicated there is extensive repair required and would cost approx. $1800. And indicated he has seen this failure before and it is due to the plastic parts inside. Also, he has seen these washers last about 5-7 years before replacement. Wow, last washer I had was a Maytag and it lasted 15 years costing 1/3 the price of the Whirlpool Duet. Now perplexed on what to buy, called Whirlpool Customer Experience Center to register my complaint and asked if there were any updates to the product that would avoid this failure. The center indicated there are updates but they are confidential and did not know if this failure was addressed.

Brand new Whirlpool dishwasher from PC Richards. Model #WDT710PAYB2. Dont buy one of these! In the store, I was turned off by the panel being on top of the door and not visible when the door is closed. I dont understand why anyone would not want to see the cycles and operation but my husband insisted that was a good thing so I agreed to purchase. Well, its horrible! I pressed the panel buttons the first time I tried to use it, and the panel switch is erratic and all over the place. For example, if I press Normal, the Heavy cycle button light goes on. When I hit start, all the button lights shut off. I finally get all the lights to stay on and hit start (after about 10 tries) and when I shut the door, the start button blinks and beeps! The dishwasher does not start. After many attempts, I got it to run, miraculously, for about 10 minutes. It emptied the detergent dispenser and left everything inside wet and slimy. Nice. I cant believe Whirlpool would sell such an inferior product. I have always been a loyal Whirlpool customer, but after this experience, I think its time to switch appliance brands. Now I have to be inconvenienced without a dishwasher after spending over $500 and wait for a repairman. Thanks, Whirlpool!

In January 2011, we bought several appliances and a refrigerator was one of them. The model number is G15VAXVQ01 which is a side by side, French Door Ref with water and ice on outside. We have had problems with the very cheap plastic drawers that are at the bottom of the refrigerator to hold vegetables and meat. We have to be extremely careful so they will not break when opening the drawers. As of late, the fruit and vegetables have been freezing. I went to change the temperature on the outside gauge and dropped the control to 33 degrees and it stuck there. I tried to unplug the refrigerator to reboot the system, to no avail. The temperature is stuck at 33 degrees which will freeze most of our food in a few hours. The freezer side temperature gauge does work.We also have problems with the ice/water machine. I pushed the water button a week ago and from then on, I couldnt get the ice to come on. I did unplug the refrigerator to reboot and then I was able to switch over to the ice, but I could not get back to the water side. Also, there is no crusher on this machine so the ice comes out in chunks. If we had to do over again, we would not buy a Whirlpool as it appears that they are not interested anymore in quality products and consider cheap junk something to be desired. Not by us! We will get this albatross fixed and see about getting rid of it. It is a buyer beware market so I suggest others beware of Whirlpool products.

On November 1, 2011, I purchased the Whirlpool Estate washer (model # ETW4400XQ) from Wholesale Appliance in Charleston, SC. The first time I used it I knew something wasnt right when both the regular and so-called gentle cycle agitated at an incredibly fast speed. It is damaging my clothes. I called the dealer and they sent out a service person. He said that was just the way it was and he couldnt do anything. So, I keep trying to use the gentle cycle, but it was the same thing. I would have to stand by the machine and stop it after a couple of minutes so it wouldnt ruin the clothes. The more I thought about it, I decided that the repairman wasnt right. I called Whirlpool customer service and they sent a different repair service. He also said that he couldnt do anything to make it slow down as it was programmed by a computer inside and he could not change it. I went to the dealer, Wholesale Appliances, and they said there was nothing they could do as far as giving me a refund or a discount on a better machine. The setting on the washer clearly says gentle cycle.” Well, the whole world knows that does not mean beat the clothes to death as fast as possible. Can you make any suggestions? Thanks.

We have a Whirlpool French door refrigerator with freezer drawer in bottom that is 2 years old. It makes a loud buzzing noise and freezes up in back of the freezer, as in a defrost problem. We have had THREE repairmen here to fix the problem, and after $650 in parts and labor, the same problem exists. Finally we were told that this $170 beautiful Whirlpool refrigerator is deemed repairable and is junk. Whirlpool will not remedy the problem and three service techs cannot seem to repair it. I will NEVER purchase another Whirlpool product... EVER!

This thing will not bake correctly, leaves pie bottoms raw, yes we use convection. We have tried everything to get it to bake correctly but to no avail. Top and control panel get very hot when only using oven. This thing is junk, taking it back to Lowes.

I installed my new water heater in 2012. Within 3 months, it was not producing hot water. When I called, a helpful person at the Whirlpool warranty line told me it was because there was too much cold water being mixed into the hot water coming from the tank. I hung up... Called again and was told that they would be able to get someone in 2 weeks out to my house to check it. I told them that was not acceptable. I hung up... I called Lowes, where I bought it. The person on the other line finally, after more than 1 hour, was able to get a repair person out there within 2 days. I had to pay the fee to have the guy come look at my hot water tank, and tell me that he hated Whirlpools. He called Whirlpool, 3 times; he was hung up on 2 times. He explained what had happened was I had a hot water leak, that it probably it was overloaded, the thermostat control everything else was fine. However, that I had installed the heater myself not a professional. Therefore it was not up to NATIONAL code; therefore, Whirlpool refused to honor the warranty. So, short version, in order to get the tank repaired, I was supposed to spend an additional $300-$400 to bring the heater up to code for them to honor the warranty. What you ask made my heater out of code? It is outside in my utility room, and the flue was cut to fit and the OUTSIDE vent pipe was not above the roofline. It didnt matter that it is not in an enclosed space, that this was nothing to do with the reasoning the thermocouple went out.I simply turned up the heat, so far so good. Will I ever buy another Whirlpool? No. I have a Whirlpool fridge bought before the hot water tank situation. The ice maker went out within 6 months of purchase. When I called to have it repaired, the service guy stated he hates Whirlpool. The piece he had to replace was plastic that was replaced with a metal piece that should have been metal to begin with.

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

Overall??? Ive owned this Whirlpool side-by-side refrigerator for a year now. Love it except for semiannual cost to replace the filter. My brother recently installed the same model in his motorcoach. Yes I recommend this appliance.???

Purchased at Lowes and within days of installation the water would heat up so hot that it would spit and spew out of kitchen sink (10 away) and be so hot you couldnt hold your hand under it. Returned to Lowes and they reluctantly replaced it. I should have bought a different brand but I felt confident that it was just a faulty thermostat. Second one did the same. Tested different settings and it seemed to work ok but a few days later it was scalding hot again. Tech support kept telling me that water heaters are intended to be used or they are like a kettle of water sitting on a flame. I told them they were crazy to think a small pilot light could heat 40 gallons to scalding temp.Guess what? I left the heater on the pilot setting and with 40 fresh cold gallons in it. I returned 24 hours later to find it scalding hot again. I got down and looked through the view window and I couldnt believe the size of the pilot light. It is the biggest pilot light I have ever seen. It blows like a mini blow torch! And there is no adjustment. This is a serious engineering flaw and extremely dangerous. This heater is at my father-in-laws house and he probably doesnt use 5 or 10 gallons a day but still, NO WATER HEATER SHOULD EVER HEAT WATER TO A SCALDING TEMPERATURE WITH ONLY A PILOT LIGHT!!!

As many others have posted - the Cabrio washer is awful. Cycle time > 1 hr. Clothes not clean and caked in soap even with extra rinse. Phone Whirlpool and found they dont care. All theyd say is its government regulation fault but for $100 they could send a technician to ensure it is working as designed. To environmental reasons for the new design, seems to me it missed the mark. Longer cycles, extra washes, extra rinses... All I can say is - Unbelievable!!!

I like the newer technology that is built into the washer. My only complaint is that the wash time is automatically set depending on your load choice. For instance, a delicate load is set to wash for 45 minutes. I dont feel that amount of time is required.

We purchased an over-the-stove Whirlpool microwave in January 2011, when we remodeled our kitchen. In May 2014 after a loud pop, the microwave stopped working. This was Model # GMH6185XVS-1. Of course, the warranty is no longer in effect. I feel a high-end appliance that cost $500 should last longer than 3 years. I will not purchase another Whirlpool product.

l will never buy Whirlpool appliances again, nor do I recommend to anyone. My wall over was 1 1/2 yrs old with a worthless 1 yr limited Warranty. I had Total Appliance from Cleveland do the repair, the only ones I found at the time that would work on this type over with a Digital panel. I think the engineers think we all live in Silicon Valley. Unfortunately the cost to repair after I cleaned the oven for the first time was $384.00 to unlock the door and 2 trips and he had to remove the door to replace 2 fuses so the door and panel would work! Im afraid to clean them oven again..I called Whirlpool and the first wait time was 70 Mins... I put the phone on speaker, finally I talked to 2 Customer Service men to no avail. He basically said my Warranty was up and nothing they could do! I said I was going to complain on Social Media and he didnt care! Go to Consumers Digest before you buy any new appliance! PS, I also went on YOUTUBE and you can see all the TROUBLESHOOTING ON MANY APPLIANCES!

Just like a lot of other people, I bought a Whirlpool hot water tank because of the good name. And just like the other people, my tanks pilot light will not stay on, it will be on for a few days and then you get up and no hot water.

They attempted to fix our fridge, 1 year into owning, claimed no parts available. Never fixed, fridge died. Refused to repair. Offered us a 15% Visa gift card on another Whirlpool. Unacceptable, they can’t fix their product, and will never recommend anybody go through my familys $3,500 wasted fridge experience. Don’t trust them, they lie, and just escalate it to another liar in the customer service department.

The problem started with an error code F3F1 on dryer. Called A & E Factory Service who is company that are certified Whirlpool technicians. They have been out 7 times, March 26, April 1, April 8, April 13, April 27, May 5 and May 12. During those times they ordered and replaced the main control board 3 times and a thermistor for which we paid for parts and labor. The company now says they think we have a lemon and we are supposed to hear back within 48 hours whether we are going to be refunded a total of $504.48 we have advanced for repairs less the service call. They referred us back to Whirlpool and said they would no longer come out as the dryer cannot be repaired! Talked to Whirlpool customer service that says we didnt have an extended warranty and there is nothing they can or will do. This dryer was purchased on 12/31/11. They took the position that because there is no recall for defective parts for this model, there is nothing they will do. Attached is our purchase receipt and all service invoices regarding this matter.

This is NOT a true review of the oven as I have not used it for baking yet. I just wanted to make a comment about my new oven which was installed this morning. I turned it on as instructed and heated at the high temperature to rid it of the odours. When it is turned completely off the cooling down process begins, which blows the hot air from the oven into the room, causing some annoyance from the hot air, as well as the noise. Not sure I am going to be so happy in summer. I am certain it is a wonderful product for baking results, but with this annoying feature, I am not feeling so happy about it.

Bought the above named model number Whirlpool dishwasher in Nov 2017 and it stopped cleaning 6 months later, dishes were instead of dry and NOW the motor is completely shot! Never again! This is ridiculous that the part cost more than the product! Worse that I need it repaired or a new one in less than 3 years!

I just replaced our Whirlpool Accubake Double Wall oven, model RBD305PDS14, because it fried the control panel after being put on self clean. This was the second time this has happened and I have probably only used the self clean feature three times since we purchased the oven. Im not a specialist in defective product design, but having a control panel burn up two out of three times when the self clean is used suggests a significant problem. I refused to pay to have it replaced again and obviously did not replace it with another Whirlpool product or any other brand associated with the company. I see that this problem has a long history dating back quite a few years with Whirlpool doing little or nothing to resolve the issue. (They just deny any knowledge about any defect in the design.) Fool me once, shame on you! Fool me twice shame on me!

I have had this product now for 1.5 years and am very dissatisfied with it. Whirlpool calls their oven an Aqua Lift Self Clean, which is terribly misleading. There is nothing self-cleaning about it, except that the person who needs to clean it is me (myself)! I cannot use oven cleaners on it, because that will void my warranty, so the only way to clean it is to scrub, scrub, scrub, down on my hands and knees, which I havent had to do for many a year. My second issue is with the glass stovetop. I have had many glass tops before and have never, never had such trouble cleaning it. Every time I use the stovetop I need to scrub and polish vehemently to clean it. And thirdly, the dials fail very quickly, and to replace them costs me $50.00 a pop! In just 1.5 years two dials have failed. This is just unacceptable, and I say shame on Whirlpool, and shame on the company that sold it to me. I will never, ever purchase another Whirlpool appliance again.

I have 2 dishwashers. A stainless Quiet Partner III & a plastic Quiet partner II. The Partner III never gets the glasses completely clean. The cheaper Partner II gets everything clean but has had several service issues.

Whirlpool Gold Microwave Hood Combo GH5184XPS4 purchased new on 12/2009. The plastic vent cracked where clip attached by factory installed screw. The vent fell off microwave on 10/2011. I spoke with Whirlpool customer service. It is out of warranty and recommended to buy new vent part ($40.00). The new vent broke once again on 12/2011, clip attachment location. Now, the plastic door handle is cracking. The customer service is sorry and recommends to buy replacement parts as long as they remain available. There are many reports of similar instances noted online. I live in a newly constructed condominium where multiple owners have had the same problems with their Whirlpool Gold Microwave Hood Combo GH5184XPS4.

So disappointed with my Whirlpool purchase. I will never purchase another Whirlpool product in my life. This is my second whirlpool oven to die in a short period of time. My most recent oven only made it two years. For there to be an internal wiring issue that is now costing me $500 to repair on top of waiting 30 days for them to be able to fix the oven. This is a terrible product. Unfortunately, I didnt realize the poor quality and poor reviews prior to purchasing from this company. PLEASE be advised.

Whirlpool stove and dishwasher very good quality. I find that the quality is beyond excellent for the amount of money. I would highly recommend Whirlpool. Easy to clean, heats up fast, looks beautiful. I would never change Whirlpool for anything else.

I bought this washer thinking it would last me for a long time. And now it wont wring out my clothes and I just wanted to say I am disappointed in my Cabrio Washer.

My Whirlpool Cabro washer does not get clothes clean. When I contacted the manufacturer, I was told that it is water saving. What kind of water-saving is it if it does not clean my clothes. I would think cleaning clothes require water. If this feature renders the product ineffective, this product should not be in the market.

2 yrs after my landlord installed WHM31017AW1... Whirlpool oven stove microwave. The door cracked then another crack and pieces from door fell on stove. I removed all loose pieces then glued all cracks & loose pieces on door. Landlord thought door was being closed too hard, silly. After all reviews same, not buying replacement door but having different brand installed.

If you are in the market for a new washing machine, steer clear of the Whirlpool Cabrio (or any Whirlpool for that matter). We have had issues with ours from the beginning. We had Whirlpool techs come out and were continually unable to fix the issues. Eventually they told them that it was not broken, even though one tech told us it definitely was. After four service calls they just stopped sending out techs and told us too bad. Now after less than two years it is leaking from the bottom. Yeah, Whirlpool, theres no problem with it. Save yourself the potential headache and get something else. Anything else.

I got the Cabrio Washer and Dryer set in December of 2015. By March of 2016, the heating element and dryer door latch had broken. Had to have those repaired. By June of 2016 and since, Ive had several repairman out to the house trying to figure out whats wrong with my washer. 9 times out of 10, it will not spin the excess water out and the clothes are soaked. Sometimes it takes me an hour to get the washer to go through a spin cycle. Sometimes the washer wont go into a cycle at all, it just makes a horrible noise (like its draining) and never does anything. It doesnt put out enough water in larger loads, so Ive had to cut my load size in half. It wont work on half the cycle options on the screen, only working on bulky or heavy. Wont wash on normal or quick wash or any of the others. It will make that same horrible sound and do nothing. Nobody can tell me whats wrong with the stupid washer and the repairman said he sees issues with Whirlpool all the time. He said save myself money and buy something else. But I remember a time when a washer and dryer would last for 20 years. What happened to quality products and craftsmanship. I am so tired of the new and fancy appliances that dont last and these companies that dont stand behind their products. Whirlpool you should be ashamed. I will never buy another one of your products. There should be a recall on these particular Cabrio units especially after all the horrible reviews I just read.

I purchased the Whirlpool Cabrio about five years ago. Last year, the motherboard had to be replaced. This year, it started load balance issues on the spin cycle; in other words, it wont spin without sounding like its going to tear itself apart. It cost $100 to have someone look at it, and was going to cost almost $400 to repair, and whats next? I spent a lot of money for this machine, and Whirlpools answer was to offer me a discount to purchase a new Whirlpool. Do I have Stupid tattooed on my forehead? I will never buy a Whirlpool again!!!

WRF989SDAB00 - Our house burnt down in April 2012. We purchased all Whirlpool products to be put back into our house. We had to purchase these items in November 2012 so the contractor could get them into our house because of the cabinets. We did not move into our house until the last week of December and could not use these items until then. In December of 2013, our freezer went out along with the ice maker. I had to fight for Whirlpool to pay for these repairs. They kept saying that it was over the one year warranty. They did accept responsibility and paid for A&E to come look at the frig. One guy came out the first time and thought he fixed it. No. A month later two guys came out. They said it was the condenser. They ordered the parts and came back a third time to replace it. A month and a half later, same problem. A&E came out a fourth time and thought they fixed it again. Nope. During this period, I purchased a extended service plan. I AM TELLING EVERYONE TO DO THIS NOW BECAUSE IT TAKES 60 DAYS FOR THIS PLAN TO TAKE EFFECT. Now the service plan people sent a different company out and he said it is going to cost a lot of money because the things that need to be replaced. The plan SHOULD cover all of this. I called both the service company and Whirlpool demanding that they send us a replacement frig. I believe sending someone out at least SIX TIMES to fix the same problem is ridiculous. Each company is blaming the other and each is saying its the others responsibility to replace the frig.

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

We purchased Whirlpool AquaLift oven from Lowes 10 months ago. Since then, I dread each time I use the oven because I end up cleaning it by scrubbing and using different products because AquaLift cleaning is a scam. I have arthritis in my joints especially my neck, so cleaning it by sticking my head inside is a nightmare for me. I will try to call the company and see what is going to happen. I read that someone is suing Whirlpool for this product so hopefully they will recall the product or refund us if we return it.

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

I bought this washer (model WTW7800XW) on 12/23/2010. Never happy with its performance from the beginning. Within the first 18 months, the lid hinge completely rusted and broke. The repairman stated that the hinges and glass lid would need to be replaced at a cost of over $400. We paid $899 for the washer. Instead of paying that much, not knowing if it would only last another 18 months, we removed both hinges and removed the lid manually to use the washer. After complaining to Whirlpool about the problem, they thanked me for the info so they could use it for the future. The latest problem to arise is the light inside the washer. The mount for the light was made of steel and has completely rusted away, so the light is just hanging inside the washer. Whirlpool needs to step up and resolve the issue with an extended warranty for these machines.

If everyone would submit their complains to Whirlpool, they might do something about this. Submit your complaint to ALL of the followings emails: investor_relations@whirlpool.com media@whirlpool.com whirlpool_customerexperience@whirlpool.com B2Bdevelopment@whirlpool.com. Here is what I wrote to Whirlpool: Model: WTW7800XWO, Serial number: C02670320. I purchased the 4.6 Cu. Ft. Cabrio Platinum Top Load Washer in June 2010. The washer lid has broken 3 times now. Its snapping by the hinges. I have been charged about $300 per lid. I believe the hinges are not durable enough to support the weight of the glass lid. I have read hundreds of reviews regarding the same model and issues, I also have a friend who has the same model and is experiencing the same issues and has had to replace the lid twice now. Im disappointed that Whirlpool has not taken accountability for this and either issue a recall or replace the lid at no charge to the customer. If there has been so many complaints, why hasnt Whirlpool taken action on this? I am requesting that the Whirlpool Headquarters address this issue immediately.When I called customer service to complain about this issue, the rep informed me that they have never heard about this issue before. From all the reviews I have read online, it seems that customer service is telling them the same thing. By not addressing this defect, Whirlpool will lose thousands of customers. This is not the way to retain or have returning customers. This is the first time I have purchased a Whirlpool appliance. I will not be a returning customer if this matter is not resolved.

Bought a Whirlpool Cabrio Washer, which I see has MANY complaints. I had a problem with the F1 issue during the first year. Same issue and I was also told Whirlpool knows it was bad design yet they refuse to help the consumer in anyway. Maybe 50% a new WP washer. Upon my call they will fix it for 389.00 and give a 1 year warranty again. Im no longer confident in WP products.

I have received two bad Whirlpool Water Heaters from Lowes. In the course of a few years, I have received two defective heaters (new). One was even a replacement for one several years old that had failed. Lowes insists that you call an 800 number where someone that speaks poor English tells you that you have done something wrong. I am returning the water heater to Lowes, and purchase a water heater elsewhere. This is a perfect example of how sometimes something that is initially cheaper is not the better value.

Very dependable. We loved all of our appliances in the past as well as in the present. It has been a go to for us especially with bad experiences with other brands like OG and GE. We have gotten a washer and a good dryer and have worked. No complaints whatsoever.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

I purchase a Cabrio WTW7800XW0 3/28/11. After the year warranty I started to notice sand like substance in the drum of the washer, which lead me to look around the drum. I noticed that the light was completely rusted and flaking, the area around the light was rusted as well. I call customer service at which time they said it was not warrantied, but they sent me out a new light. This did not repair the problem! The rust has continued causing the area around the lid joint to break. Also the area around the bleach dispenser is showing rust- the same side as the light and the lid break. They have said this is not covered and only agreed to pay 1/2 of cost of materials (no service).

This microwave lasted for 15 years! Worked great. Started looking kind of bad after 10 years but still worked. Amazing! All their products are great and last a long time. Would buy again. Boil water in minutes.

We just remodeled our kitchen and bought a Whirlpool kitchen suite in May of 2016. The refrigerator is absolutely terrible. I have had a repairman come out and fix the same repair/problem 5 times, a sheet of ice forms beneath the vegetable drawer (We have only owned the refrigerator for 5 months). Each time the repair person has come out it costs me a day of work due to having to wait all day for the repair service that Whirlpool hires out, well be there between 9am and 4pm. This morning I decided to check to see if the sheet of ice is forming again, it is. So I call Whirlpool again.Again, I call Whirlpool and ask if I can just get a new unit; 5 repairs in 5 months on a brand new refrigerator. The reply I get from Whirlpool is always well send someone out to fix it. The unit has to be deemed irreparable or a part has to be replaced multiple times. No parts are being replaced... no one knows how to fix it. I dont understand why a large company like Whirlpool would want people to write bad reviews for their products and customer service. Im extremely irritated with how I have been treated. I just want a refrigerator that works!! DO NOT BUY A WHIRLPOOL REFRIGERATOR!!

I have a Whirlpool Cabrio washer and dryer set. The heating element went out on the dryer when it was less than a year old. I purchased the set at Lowes. They sent out a repair person who called and told them it was the heating element and he replaced it. Two weeks went by and I could smell something burning. I called Lowes and after two weeks wait the repairman showed back up. He said that the control panel was bad. Lowes replaced my dryer and I have not had any further issues with it. Lowes gets an A+. My washer went out about a year later. It was making the loudest noise on the spin cycle. The repair person came out about 2 weeks after I called and told me that the washer was basically worthless, that the repair would cost more than the washer would to replace. I was totally shocked and decided to use it until it died. In the meantime, I found a repair/used appliance place. They repaired it for $235 and it ran for about 4 months. Then the noise returned. I have had it repaired again. Now the control panel gives me the SE light and stops running with 27 minutes left in the wash cycle. I have had nothing but problems with this machine. I would not recommend Whirlpool to anyone. Im going to have to replace this machine and it has cost me lots of $$. Junk!!

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

First off, took five weeks to get the damned thing delivered after buying it at Lowes Home Improvement. Have problems with the drain overflowing when the washer tries to empty. Major plumbing work to rectify that. My complaint with Whirlpool is the washer doesnt work. It will partially fill and then stops. The wash light then lights up and nothing happens. I let it sit for three hours and the clothes never washed. It took an act of God to get the washer to empty. It never did spin the clothes. The washer refuses to work through the cycles. $1500 wasted on this POS! Trying to get an appointment scheduled is equally frustrating on Whirlpools website. Never again will I buy Whirlpool!

This is my first electric range. It’s amazing! It cooks evenly and at the exact temperature! The stovetop has size adjusted burners, again at the precise temperature. And the look is very sleek & modern, perfect for a new kitchen! I am so very pleased.

I am very disappointed with the purchase of a Whirlpool Cabrio Washer and Dryer I made about 3-4 years. The price was too high and the quality is extremely poor. It has a leak in the pump which will cost me $300.00 to fix. I probably would have been better off buying the cheapest washer and dryer set they had. At least, those actually wash the clothes and dont breakdown. Never again will I buy a Whirlpool and I will get every chance to share my opinion of them.

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

I had purchased a microwave oven on 18 April 11 and they delivered it to me without accessories. As I was a first time user, I didnt have any idea that the accessories are available with the oven. However, when I came to know after 5 months, I asked them about it and they did not respond to me properly. Even when a Whirlpool engineer visited my residence, he did not ask for the accessories for the demo purpose.The warranty paper has not been filled out by the dealer or the engineer; it is still blank. I tried to put a complaint through the customer care number but they did not respond to me properly.

Our 2 yr old Whirlpool Gold refrigerator (French doors, bottom freezer) stopping freezing/cooling. When we got a repairman to come take a look at it, he said the compressor is not working. The warranty on the fridge is only 1 year. However, the compressor is the main component of a refrigerator, and the repairman said 5-6 years is the minimum it should last before breaking. I called Whirlpool and asked them to pay for the repairs of what is quite obviously a defective part. They refused. Needless to say, I will never, ever buy another Whirlpool product again.

We recently bought a home and our dishwasher came with the home. We saw our basement leaking and got 2 plumbers come over and check the pipes out, paying almost $600, only to realize that the leak was actually from the broken plastic in our dishwasher, and not any pipe. When we called the Customer Service to get it replaced as it comes with a 20 year warranty on the plastic body, they said they would replace the part, but I would have to pay $81 for the first 15 min & $19 every additional 15 min. for labor, which means I would end up paying at least close to $400 or more, depending on how long the technician takes to replace the fiber body. Neither their policy nor warranty make any sense to me. Its frustrating to see that in spite of being covered, I would be the one paying money out of my pocket.

Purchased a Whirlpool double door refrigerator and within a year the freezer and refrigerator doors were severely out of line. Called repairman who said the risers were broken, they were plastic and needed to be replaced. We did that. The doors were again out of line so badly that you had to push the refrigerator door side hard to get it to close. Repairman came today and stated he would recommend ditching the refrigerator as the risers in the bottom of the refrigerator are made of plastic and will continue to break. He leveled the doors but stated that they will continue to become out of line again.The repairman stated that this is a design defect in the Whirlpool refrigerator and he has replaced the risers in many of the refrigerators repeatedly. As if the refrigerator isnt enough, we own a Whirlpool Duet Washer and Dryer. Within 3 1/2 yrs the motherboard went bad in the washer and we had to replace it. The part and labor was almost $400. Whirlpool considered us a valued customer and offered us a comparable washer for $500 and they would take ours away for $20 extra. Only problem is that our original washer was $1,000 and the comparable was not as large as the one we had and did not have the stainless ours had.All I can say is if were valued customers I would wonder how they treat their less valued customers. All of this is to say that I will no longer purchase any Whirlpool products. Not only are the products below par but the customer service is non existent. They really do not care if they lose customers or not. They dont want to hear your woes about their appliances.

Please DO NOT purchase an appliance with Whirlpool. I have had my double oven WiFi for 7 months. It has worked great. They did a update on it and I have had an hour glass for 2 1/2 weeks but the crazy part was they sent me a part, had it expedited 2 day shipping on a Friday and I didn’t get till Thursday of the next week. Go figure. So they send a new part and guess what? It’s broken and my oven doesn’t work once again. The other part is they have to wait for the code on the error 3-5 days. One we are going on week 3 with no oven and at this point I call and tell them my husband can run to Lowe’s and take a control panel off a new stove and put it on or better yet something is wrong with this oven. I need another oven because at this point I’m extremely pissed. Please DO NOT buy any products with this company. They SUCK!!!! They should replace it and pay me for all the meals I have had to buy.

Mid-sized, mid-range dishwasher. It is noisy, not quiet at all, and we must speak quite loud over it if we want to be heard. The wash cycle is quite long... not really a water saver.

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

We purchased a Whirlpool refrigerator from Conns Appliances on 2/2/12. It worked fine until about 2 months ago. Then it started freezing food in the refrigerator. We called Conns, and they sent a technician to replace the thermostat. A couple of days later, it was still freezing food. So we called Conns again. They sent a second technician. He called Whirlpool tech support, and they told him to adjust the position of the thermostat sensor. A couple of more days went by, and food was still freezing. The problem had gotten even worse.I called the manager at Conns and suggested that we should consider replacement since the previous 2 technicians were unable to solve the problem. He sent a third technician. Tech #3 called Whirlpool tech support and re-adjusted the sensor. He said there wasnt a lot they could do and that if I wanted to get it replaced, I would need to call Whirlpool.I called Whirlpool Customer Service and explained everything that had happened. They told me they would need to send another technician. I asked why, since 3 technicians had already looked at it. She said there were different levels of service and they would have to send someone from their authorized service company, as if Conns is not authorized. I asked if this problem was common in this model of refrigerator. She said she could research that if I could hold, so I said ok. After being on hold for several minutes, she came back and said she couldnt find any record of this being a repetitive problem.I didnt have a thermometer, and I thought if I had more concrete evidence of the problem, then maybe they would replace the refrigerator. So I put a glass of water in the middle of the top shelf. Within 24 hours, it was frozen solid as an ice cube!Technician #4 came and called Whirlpool tech support. This time, they told him that this had been a problem ever since this model came out and they had a fix that had been on the books since day 1. So the customer service lady obviously lied to me. Technician #4 stuffed a piece of Styrofoam in the hole where the air comes from the freezer into the refrigerator and he re-adjusted the thermostat sensor. I asked if we could just replace the unit and be done with it, but he said we had to wait and see if his fix worked.I went to Ace Hardware and bought a refrigerator thermometer. Two days later, we had frozen strawberries, frozen lettuce, frozen milk, and even the meat and cheese were freezing. My thermometer said temperature was 32 degrees. I called Whirlpool back and insisted that they replace the refrigerator. They told me The unit was not authorized for replacement and they needed a 2nd opinion. I was very angry. I told them there had already been 4 opinions and a 5th wasnt necessary. I wasnt getting anywhere, so I asked for a supervisor. They transferred me to someone named Sue. Sue told me the same thing - not authorized, need a 2nd opinion. I told her that I work at The Mens Wearhouse and that if a customer spent that much money on a suit and had trouble with it, they certainly would not have to bring it back 5 times to have it re-tailored. I asked to speak to her supervisor. She said, Sir, my supervisor doesnt speak to consumers. I could not believe my ears. Where would they be without consumers? I was so mad I hung up on her.Later, I realized I had no options and called to request the 2nd opinion. I was told that the technician could authorize the unit for replacement. They also told me I couldnt get a technician for a week because their technicians were all booked up repairing their faulty products. I had no choice but to wait. I moved my thermometer to the bottom of the refrigerator to see if the temperature was the same there as on the top. The temperature there fluctuated between 28 and 34 degrees. I called Conns to tell them the story, thinking maybe they would go to bat for one of their customers. They told me this should never have happened and that the matter should be escalated to their home office and that a manager would contact me within 30 minutes. He never called.Two days after that phone call, I went to Conns to speak to the manager. I told him the whole story and told him that if Whirlpool would not replace the refrigerator, then I would have no choice but to contact Discover (my payment method for the original purchase) and dispute the charges. I pointed out that even though it should be Whirlpool paying for it, his store would take the hit if Discover reversed the charges. He called someone and told me a Conns service manager would contact me within 48 hours.More waiting. Technician #5 came. I told him he was to authorize the unit for replacement. He said he couldnt do that and that Whirlpool tells all their customers that just to get them off the phone. He re-adjusted the temperature sensor and left. I was livid. Now the problem went the other way. The temperature wouldnt go below 50 degrees. We filled an ice chest with food and ice and began living out of it. The Conns service manager called and said he would have to send a technician. This would be #6. I was very angry with the service manager and called Discover to dispute the charges. Discover opened an investigation, sent a letter to Conns (and maybe Whirlpool, Im not sure) and issued a credit to my credit card account.#6 came and re-adjusted the thermostat sensor. The next morning, he called to see how it was doing. The temperature was still around 50 degrees. He wanted to come and adjust it again. I told him to get the unit replaced! So he submitted paperwork to request a replacement. He called back and said that he felt sorry for us because he knew we had a 3-month-old baby in the house. Since the replacement had been requested, Conns wouldnt pay him to come again; but he said he would come on his own time, on his lunch break, and readjust the sensor in hopes that it would get us by while we waited for a replacement. He said it might take 3-4 days to get the replacement. I told him he could come, so this was technical visit #7. He adjusted the sensor. The next day, the temperature was still 50 degrees.I called the service manager at Conns to confirm that they had requested the replacement. He said the paperwork was submitted, that the home office would review it, make a decision, and that we should know something in a couple of days. That was on Wednesday. On Monday afternoon, I called him again. He said the paperwork wasnt submitted to home office until Saturday and that he was expecting to hear from them by end of day Tuesday. In the meantime, we were still living out of an ice chest.I had already determined that Whirlpool wasnt going to help me, and now, Conns was giving me the runaround. That afternoon, I was working on a project at work with a lady who was fairly new in our company. Turns out she used to work at the Conns home office and she knew people in high places there. She called a VP on my behalf. The next morning, I got a call from the VP telling me that I could get a replacement. I dont think I would have gotten my replacement if I hadnt bumped into the lady who used to work at Conns.I called Conns store, and they said a credit had been issued and I could come to the store and pick out whatever I wanted up to the amount of the credit. I knew I didnt want another Whirlpool. The selection was very limited, but I found a Frigidaire that I thought might work. Then they told me I would have to pay extra for an ice maker, even though I had bought the ice maker for the Whirlpool that was being replaced. I argued with the manager until finally he agreed to give me the ice maker, delivery, and installation.Yesterday, Conns called to tell me they were coming in the afternoon to install the refrigerator. They had the audacity to ask me what was the matter with the unit they were replacing! They did come and replace the unit. But wait...Thats not all! This morning, the ice maker had not made any ice, even after running all night long. Conns sent a technician today, and he said all of the parts were not installed and it was preventing proper water flow. He is coming back on Tuesday to install the missing parts. So we still arent done. I dont know if Im more angry with Whirlpool or with Conns. Whirlpool did not honor their warranty and Conns got stuck with it. But then Conns provided poor service too. I got stuck in the middle, and it still isnt fully resolved.

Water began accumulating on the floor, dripping out of the freezer 16 months from installation. Upon investigating I found the bottom of the freezer had a solid sheet of ice on it. Water was dripping out from the back of the freezer and collecting until it froze. I followed a YouTube video that explained the problem, the freezer drain clogs. The video continued with a how-to dismantle the freezer to defrost the drain and drain the water. Apparently the drain is too small and the fix is a new grommet which costs approximately $27.00. I followed the YouTube video and TEMPORARILY fixed the trouble myself. This is a Whirlpool defect, aka, poor design. What is Whirlpool offering to customers to permanently solve this problem at no cost?

Whirlpool fridge with serial # EL2427127 started on fire. Flame started on own but filled entire basement with electrical fire smoke. All terminals on compressor completely melted off. After researching online, I see Im not the first. Unbelievable.

Really pretty fridge... wish it was just a little smaller. Also wish matching appliances had grey sides like the fridge does. So far it has been a winner.

My refrigerator has needed several repairs in the 5 years since purchased new. Several plastic parts (bins, handle, etc...) have cracked and ice maker no longer works. Dont think I would purchase another Whirlpool major appliance if at all possible, as I am deeply dismayed at how this one has held up.

We have several Whirlpool products in our home currently and have been very satisfied with their performances. We have their fridge, stove/oven, microwave and dishwasher, all of various ages. We purchased them from a local big box building supply company and installed them our self. The installation directions are clear and simply for the average D-I-Yer. We would recommend Whirlpool to everyone shopping for these home appliances.

Purchase at 2014 and still working and nowadays, they dont make refrigerators, washer or dryers to last more than 3 to 4 years. The quality of appliances, really such since the manufacturers are greedy. And after the 5 year Warranty expires, only Lowes buys back the the appliances and Home Depot. Their Warranty specifies that you have to purchase from them to replacement of an appliances if purchased from them!??? Therefore I would not buy any appliance from them. A refrigerator, washer or dryer, you can take parts from each one and build a whole new appliance, which is very disappointing! TO ME THIS IS BAD BUSINESS FOR AMERICANS, not all people know this by experiencing this yourself and I let people know about my experiencing this myself, manufacturers should make products in The United States of America???

We have had our range for over one year. The main problem is that the large burners are in the front and the small burners are in the back. This means that when we are using the two front burners we cannot access the rear burners safely. (What country provided the engineering design for this?) One minor problem is that we cannot get used to the burner control arrangement. The outside controls control the front burners and the inside controls control the back burners. Our old range was the right control for the back burner and the left was for the front burner. Another small problem is that there is no back to the pan drawer. So, with the drawer full if a pan move when the drawer is shut it will be scraped off the drawer and fall into the back and becomes hard to reach to remove.

April 14, 2014: Bought Whirlpool 30 electric stove WFE361LVQ Sept 2009, $545 - only 4.5 years old. While broiling, got strong electric burning smell, filled house. Broiler and oven stopped working (top burners OK). Opened back and found BURNED CONTROL BOARD corner and BURNED OVEN FEED WIRE. Definite SAFETY HAZARD. New panel $289 and wire harness $105 + 25 = $418, discount to $375, + service call to find out why/install guarantee $129 = $505. Ridiculous! Will contact Whirlpool for recall and compensation. Hope other recent entry sees this. (How respond to specific entry, since this response pulls us away from listings?) Meanwhile, well buy any other brand replacement.

Front Load Washing Machine, Model WFW97HEDBD0 - This is the worst appliance we ever owned. Purchased in 2015, multiple problems since! 1. Soap dispenser did not dispense and leaked down the front of washer... 4 service calls, control panel finally replaced, clothes not clean, leaking continued. Had to place soap into washer drum. 2. Pedestal drawer made grating noise, track off, drawer replaced, opened better but still made irritating noise. 3. Grease oozing from side of washer both sides. Decided to look in back of washer and OMG! A copious amount of grease is also beneath & behind the washer & dryer. I had to scrape with a metal spatula device to pick up and it took over 1.5 hours to remove & clean. We are lucky a FIRE did not start when using either machine. This machine was a LEMON from the beginning. In fact when we were having it serviced, I stated I wanted it replaced but was informed 2 visits were counted as 1 and did not qualify for further investigation. We cannot rid ourselves of this machine fast enough after the last issue. New washer coming tomorrow, not a WHIRLPOOL! New machine is LG WITH 10 year warranty on motor.

Model CAE2745FQ0, Serial #C72680766 - Purchased this coin op clothes washer 2/2/2018 at Brandsmart, Deerfield Beach FL. Would not empty or spin correctly; 1st service call 2/28/2018. (Less than 30 days from purchase date). 3/21/2018 called Whirlpool again as same problem continues (as listed above). Washer is not being overloaded. Whirlpool repair visit scheduled again for 3/23/2018. This is the 2nd repair time since we purchased the washer on 2/28/2018. Purchased the same model 2 years ago, and experienced repeated problems to the point where we got rid of that machine and purchased the most current model referenced here. We are looking for a full refund of the purchase price as it appears that this recently purchased machine is on its way to be a repeat performance of the 1st machine that we got rid of (that was purchased 2 years ago). Again, we want the full purchase price refunded, which is $900.88. This machine is not even 2 months old. Thank you.

Whirlpool Cabrio Model Wtw8000BW - Purchased machine Jan. 2014. It does not wash my clothes clean. Clothes come out with dirty streaks all over them. The clothes I dry on a line smell dirty, like they werent rinsed properly. I have been cleaning the machine the first of every month per the instructions. I will never buy another HE washer again, this is my second one. Purchased a new one with an agitator.

I have owned an Accubake gas range since April 2012. The range is 3 months out of warranty, and the oven will not light... just a clicking sound and gas pouring into the oven. I have also had problems with the burners being turned on by brushing against against the knobs. I have a note by the stove to remind myself to check that the knobs are in the OFF position. My 1 year old grandson turned the burner on just by touching the knob... NO SAFETY FEATURES!!! I havent checked to see what a repair is going to cost me, but if it is several hundred dollars, I will just replace this piece of junk. It is very sad that a costly brand new appliance only comes with a one year warranty. I will never ever buy another Whirlpool appliance!!

From the time I had the Cabrio top load washer, it has been repaired at least 8 times. I did get the extended 2-year warranty. I should have known that this machine was going to give me problems from the first service call. I have had to have the motor replaced 4 out of the 8 times the machine has been serviced due to coins getting into the motor. I have a problem with rust around the dispenser. I also feel that the clothes get very tangled when washing. The machine is just 5 years old. This time when I called for repair with A&E appliance repair, they told me that it was going to be $450.00 to repair. Now, I am not going to repair it, especially after having all the problems I have had with it. I will never purchase another Whirlpool product or any of their other products that they make. I did call Whirlpool just to let them know my problem and to let them know that there have been hundreds of complaints with the same washer that I have. It’s too bad that Whirlpool has no respect, passion or pride in what they make. I am going to purchase a new washer and it will not be anything related to Whirlpool.

I was not impressed with the new HE washers but could not find any traditional ones anymore. I bought a Amana and am disgusted that it is only 3 years old and needs to be replaced because of a transmission problem with it not agitating. It costs more to repair than it is worth. As a consumer, I should be given a choice whether I want to upscale or be satisfied with older model features. I will never buy or recommend a Amana HE washer to anyone. My mother also has one, has had it for a year and it is already giving her problems. Shame on you Whirlpool.

I am so disappointed with this washer. I totally dread doing laundry. The following are the complaints: Every load comes out totally twisted and wrinkled!! The soap/fabric dispenser holds water after each load (I have to take paper towels and get the dispenser empty!!!). There is not enough water to properly clean the clothes. I have never noticed a reduction in my water bill and have had this piece of junk since 4-25-13. There is NO short cycle on this junk machine. There is an odor to my towels - like they are musty - after I dry them and use them. I use Tide HE detergent and clean the washer with Affresh (you shouldnt have to clean a washer). I should have taken the time to write a review much sooner, but decided today was the day after doing laundry. DO NOT BUY THIS WASHER.

This washing machine has been nothing but a problem from the beginning. Theres always something wrong with it. Things that cost so much should last much longer than a couple of years! I have to clean out the drain about every 3rd time I use it or it wont spin out as well.

My stove hasnt been a problem from the start. I have had to buy two parts one for the oven, and the top. I feel my stove is dangerous. I would not buy a Whirlpool again. I would like to know who makes the stove that dont costs a arm and a leg. My stove is less than five-year old.

Last year, our clothes started coming out too wrinkled. And until recently, its making a loud noise like an airplane. I called Whirlpool, and the only help they can give me is finding a company that would do service and would charge a lot.

Although we live in Canada, we purchased our slide-in oven at Sears Roebuck in Buffalo, NY only because of the size availability only in the US (actually, the unit was manufactured in Canada as we found out later!). Obviously, this created another problem since the unit was not underwritten by Canadian Electric codes, Sears Canada repair would not touch it! Once installed, it worked great until the first problem with the oven quitting after self-cleaning. It is the second time in 3 years that both the thermostat and the sensor went in this RBS245 slide-in oven. Once the self-clean cycle completes (quite smelly!) and cools, the oven does not operate rendering the oven useless. First time, in 2009, Sears repair only suggested (since they would not do repair on it for reasons stated above) which parts could be faulty: Timer, sensor, thermostat or elements. It was thought to be the electronic timer unit, which was replaced at a $215 (needlessly) because that was OK. Both thermostat and sensor cost $150. Even the elements were replaced, $52. The second time, just a week ago, exactly the same happened. I replaced the 2 items: Sensor and thermostat at a cost of $154 and the oven worked fine again. I called both Whirlpool US and Canada, but no one could/would give any answers why this happens.So far, it cost $600 in parts to repair! This is nonsense from a company that has had good reputation and record. Obviously, that is changing! If Whirlpool cannot engineer a product that works as they say it does, they should close the shop! Reading here, there are others who complained with the same problem. It is time for Whirlpool to come clean!