I bought my Whirlpool Duet set with pedestal in February 2008. I just had a tech here to figure out why my machine is so loud during agitation and that I cant hear anything else. He said its the drum hitting something. I never overload my machine - just normal use for 4 years. It costs more to repair the machine than to buy a new one. Now, after seeing this information, Im not the only one who has this problem with my Whirlpool washer. I am disappointed that there isnt anything else the Whirlpool company tech can do for me - just a receipt that shows the parts alone cost $600.00. Now, I have to pay about $50.00 just to get rid of what from the outside looks like a perfectly good machine.

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

We purchased a Whirlpool (gas) range with double oven, in April of this year. We found that the upper oven over heats, on the right side, and therefore burns or bakes unevenly.The repair company will be out for the fourth time tomorrow. They have been very nice to deal with, but really have not been able to repair or come up with any definitive plan of repair action.

We purchased our Whirlpool french door refrigerator with bottom freezer, model number WRF990SLAM02, from Lowes in August 2013. In November 2013 we noticed a pool of water on the floor, resulting from what looked like a leak coming from the ice maker. After contacting customer service, they sent a repair company to service the fridge. This rep stayed no longer than 5 minutes and barely looked at the appliance. He said this is a known issue by the company, they have since implemented a fix in the newer models, and it just needed one replacement part and would be good as new. It did NOT fix the problem, it continued to worsen to the point where the freezer is no longer working. I have a freezer full of defrosted food that is not safe to eat. Whirlpool finally agreed (after 3 months) to send another repair company to look at the fridge. This rep took over an hour thoroughly examining the appliance and concluded that it could not be repaired and would need to be replaced; otherwise, we could expect the same issue to keep recurring. Whirlpool did agree to replace the fridge, but has not been able to provide a timeframe. I was contacted by a representative from the product replacement line named Alisha, but she has never answered her phone I have returned her calls. I finally got a representative on the line who informed me I need to wait until I get a call letting me know the replacement product is in-stock. That was 3 weeks ago, and this morning I woke up to a huge water leak coming from the fridge. Whirlpool has deflected the issue off to Lowes, where I purchased it, and said they will have no further contact with me regarding the appliance. I will NEVER purchase another product from this company again. They seemingly left a faulty product on the market and failed to inform me about the known issue. Then they failed to quickly provide needed repair or replacement in a timely manner. They also refuse to reimburse me for the food loss, which would not have ever occurred had they handled the issue appropriately from the beginning. TERRIBLE company.

I just purchased a brand new home. I have an electric wall oven with the microwave over the oven. They are both built into the wall. Can anyone tell me why a massive amount of steam is coming out. It is really bad it makes my microwave glass so bad I can see through it. It is also making my cabinets so wet I have to use a towel to dry them. Plus I got a steam burn. Can someone tell me if this is normal.

This Whirlpool dishwasher is the worst dishwasher I have had in 45 years of using dishwashers. I have bought dishwashers, but now rent and so am stuck with this one. Initially, I complained to the landlord about the dishwasher not getting the dishes clean, so the repairman came and recommend replacement. Unfortunately, it was replaced with the same brand. The new one didnt wash any better than the old one so I pre-rinsed everything and the dishes still come out with sprayed dried food on them. The spray holes in the arms fill with food no matter how thoroughly I rinse the dishes. The silverware in the door rarely is clean. The filter is always coated with food particles. The top shelf is always worse than the bottom shelf. I have used inexpensive GEs before and nothing compares to the poor quality of the whirlpool.

Steam cleaning DOES NOT work! I have complained to Home Depot and Whirlpool since my purchase 9/2018. They sent 2 different repair men and both times I was told there was nothing they can do. I got one phone call from Whirlpool (Maytag) and they sent me a cleaner (wish is just for the stovetop). No other return emails or calls have been acknowledged. My stove looks like it hasnt been cleaned EVER! I was also told to use elbow grease. I am so disgusted and at my wits end. Any suggestions, besides court?

I had bought from S C Shah & Co, Mylapore a Whirlpool ac 1 ton split magicool dlx cop in March 2016 and installed in March 29 2016 by Cool Control System, kodambakkam From the installation period we had a cooling issue and informed Shah & Co, Mylapore where we bought the ac. They came and checked and informed Whirlpool customer care. Within two months i.e. in May 2016 of installation Whirlpool again uploaded/charged the gas (the service engineers told us this is due to hot summer). Though again we had a cooling issue, we were under the impression as this is due to summer as explained by the technician. After that rainy season came and we didnt use the ac.As we are in December when we complained Whirlpool they said this is due to the copper wire gas is leaking and it has to be replaced and informed that though under WARRANTY, the customer has to pay for replacement (we have used only the 3 mtr copper wire which came with the ac only. we have not used any our own copper wire). Whether WHIRLPOOL GIVES SUCH A QUALITY COPPER WIRE which has to be replaced within 9 months. Now they are informing that you are calling us after 6 months of gas charging, so we cannot service. If you could have called within 3 months we could have serviced you. BUT WE ARE UNDER WARRANTY. NOT EVEN AN YEAR FROM THE DATE OF PURCHASE.Not responding to calls, disconnecting to the calls even if we call their Delhi number 011-49308500. Though under warranty they are not ready to do service and very rude saying, we cant do anything. So, if we buy WHIRLPOOL ac we have to beg them even for their technicians to visit our place. Or we have to do our own service EVEN UNDER WARRANTY. Their local toll free customer care numbers/service executives always give a recorded message saying they cannot service. SUCH A PATHETIC SERVICE.

When I bought this stove, I already had a glass top (Sears) which was satisfactory but I changed to get a convection oven, never had a problem cleaning the glass top. To me, Whirlpool was, and I emphasize WAS, a reputable manufacturer and the stove offered everything I needed. Not so, the glass top is a nightmare to clean; no amount of elbow grease works. It is like cooking on a mirror. Talked to everyone I contacted but, it seems, I am the faulty element in this problem: I DONT KNOW HOW TO CLEAN!!! YOU NEED A FIRST OF SOMETHING FROM TIME TO TIME AND THIS WAS A FIRST FOR ME.They told me the only solution they could offer was to buy their own cleaner. Why do they need to market their own cleaner? I did not buy a museum piece that needed to be treated with special care, I bought a stove to cook on. I want as many people as possible to know about that uncleanable glass top. Every time I need to cook, I cringe at the amount of time and effort I will have to spend to get it clean. I am not a novice, I have been doing housework for the past 60 years. Beware, it is a most frustrating situation to having paid top dollars and to be stuck with a product that brings such frustrations. By the way, it was bought at The Brick in Canada. They were not helpful either.

I purchased the Whirlpool Cabrio washer and dryer about 5 years ago. I wanted to pay for a good pair to last a long time for the money. We have had a repair man out twice for the washer. They ended up replacing the computer board. It worked fine for a few years. Now, it keeps getting the unbalanced error code for almost every load of clothes that we start. Sometimes, it takes 20-30 minutes of rearranging the clothes to get it to finally work. I have had to manually set it to finish the loads on a number of occasions. It is so time consuming to do laundry due to having to play with the clothes to get the loads to finish. Plus, I dont know how many times it has woken up my grandkids because of the loud thumping noise it makes when it gets unbalanced. I have never had a washer do this. I would expect when you pay big bucks for an appliance that it should last a long long time. One usually gets what they pay for. I should have bought a cheaper pair. Then, they probably would have lasted 15 to 20 years.

We bought this dishwasher new from the Brick 2 or 3 years ago. It was bought not because old dishwasher wasnt working, but we needed a new fridge and stove so we also bought a dishwasher to match the new stainless steel fridge/stove. If I could give 0 stars I would. Biggest complaints: It doesnt matter what soap, what setting or how much your rinse/scrape your dishes THIS DISHWASHER WILL NOT CLEAN THEM. Its very rare it actually cleans a dish or utensil properly. If your plate had ketchup on it, it wont clean it. But if you had a sandwich on the plate and managed to not get ANYTHING from your sandwich on the plate, it would come out clean.The drain constantly clogs. We rinse everything, but the drain hose constantly clogs to the point the unit wont drain. Have to remove the unit, take off hoses and blow them out. It clogs because the strainer at the bottom of the dishwasher which is supposed to stop stuff from going down the drain hose doesnt work. If you look at the strainer and the system they use to stop stuff from going down the drain hose. Its no surprise it doesnt work. By design it cant work. My brother in law is a licensed appliance repair man. Sears actually paid for his schooling. He installed and hes fixed the clogged drain numerous times. He agrees. Worst dishwasher ever.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

We purchase all Whirlpool appliances for our new house in Florida in late 2015 from Good Deals Appliances. First repair before 1 wk in-house was the dishwasher. Wires were not connected. Now it is the refrigerator (French door refrigerator model K44913210). We reached out where we purchase the appliances and they gave a number of repairman to connect. He came and told us the compressor & evaporator & valve needed replacement, We found that hard to believe that a 2-yr-old refrigerator needed all this repair. Called another repairman to hear same thing. We were also told this problem is so common with this model. Called Whirlpool. They sent a repairman out. Said same thing first two said. They are paying for parts but not labor. We were told by last repairman that this refrigerator hasnt worked from day one. Passed info to Whirlpool and no comment. We paid a lot of money for an upgraded refrigerator to have it quit in 2 years. Totally not acceptable. On top of this the parts may not work for more than 2 years again. Okay Whirlpool who is going to pay for all the ice & dry ice, the other two repairmen that came. The repairman you sent was double the price of other 2 & will not come back till we pay. We will pass our experience with Whirlpool on to all friends and friends of friends.

Agree with some of the other reviews. Product misrepresented to clean oven effectively and does not work at all. You have to do all the work yourself because it is so useless. Oven also does not cook evenly. Front and back of oven cook at different rates. This oven should be recalled and all money refunded to purchaser!

Whirlpool 29 cu ft French Door Refrigerator WRF989SDAM - We purchased this refrigerator September 2013 for our new home. We moved in November 18, 2013. The refrigerator made a very loud buzzing/humming noise from the beginning and did not make enough ice. The shop we bought it from came on 2 occasions to work on the ice maker and finally totally replaced it. Then the rack on the bottom of the left door fell out and contained glass jars of pickled vegetables. They broke and made a big mess and etched our travertine tile floor. We called the shop and they sent their son out who put the rack in with duct tape which of course did not work so we took it out and put it in the cabinet. We had to pay to have the tile polished to remove the etching. On the weekend of November 15, 2014 the humming noise was so loud that we called the repair person again and they came out on November 17, 2014. At first they thought it was a fan motor but the freezer started making a loud noise and the owner came and said the compressor was going out. Our food was beginning to thaw and we asked if they could at least loan us a refrigerator to use. They brought us an old small fridge which was put in the garage. We took all our food out there. They came November 25 and picked up the fridge to be repaired. We had been told the warranty was out but after calling your company they were told Whirlpool would cover parts and labor. Today is Thanksgiving Day and we can not cook a big meal due to the small fridge and freezer and we are buying bags of ice every day. We have family visiting and must go out for dinner. We have no idea of when our refrigerator will be returned to us. This has been an expensive and disappointing experience. I would never recommend your refrigerator to anyone due to this experience. I really feel we should have been offered a new refrigerator at a discount. We bought all our appliances from Dons Appliances in Okeechobee, FL 34974 and they are all Whirlpool. This refrigerator cost $2299 and our total order was $9,642.84. We would appreciate a response from your company.

Atlanta Gas Light Company showed up at my door Saturday Jan 16, 2016 citing they needed to do maintenance on our meter. 20 minutes later, he came in and said we had a leak. He checked all of the furnaces and water heater, then zeroed in on my brand new Whirlpool Range (purchased 11/11/15) indicating it had a faulty control valve. This faulty and dangerous range was sold to me by Lowes and manufactured by Whirlpool and we had unknowingly been living with a gas leak for 2 1/2 months! Its notable that Atlanta Gas Light sends our contractors only every 3 years to test for gas leaks. I shudder to think what would have happened had they not done this. Ill never buy another Whirlpool anything. Model Number: WFG320M0BB0.

We bought a side by side refrigerator/freezer in 2013 from our local Best Buy. We have usually bought Whirlpool appliances. Before we bought this refrigerator the last Whirlpool we had for 25 years. This past week our refrigerator went out. We called a repair man. He said the circuit board was out and would cost $450.00 to replace it. We decided to buy a new one. I am very disappointed that it only lasted 7 years. Oh I forgot to mention the ice maker went out about a year ago. We did get new filters as instructed. We did not buy another Whirlpool.

Purchased microwave 7/3/2016 & paid for installation on 7/9/16. Product started malfunctioned in December. Technician came out 12/30/16 and as of today we still do NOT have microwave. Whirlpool claims they issued credit for microwave & installation. But somehow between safety department & vendor relations with hhgregg they want us to pay AGAIN for installation & haul away on a defective microwave. Hhgregg vendor relations & Whirlpool pointing fingers at each other, we are still without a paid in full microwave. No one cares, and we have been treated poorly by both Whirlpool & hhgregg. Its 3 months without a microwave and Whirlpool doesnt seem to care one bit. Worst customer service Ive ever received.

Cabrio Washer mod# wtw6700yw1 - Washer and Dryer purchased 2011. Now washer will not complete entire wash cycle. Shut off after 3 mins lets all the water out. Now affects all levels of wash. Contact Whirlpool customer service. Sent repairman. Claims sensor board needs to be replaced. Costs $285.00 + $55.00 for labor + $79.00 service call total cost $419.00. Needless to say I declined the repair and now after reading all other complaints glad I did. This sounds like a money pit, just keep repairing and never being fix. Repairman suggested Speed Queen washer so now shopping around for new unit. Dryer so far still working.

Our double oven was part of our new home purchase so we really didnt have a choice in product. Brand new. Hardly used. The control board replaced because it went bad 2 weeks after install. After one use it had it replaced and it went bad again. Used it once and again same thing. My mom unaware of the issue used the self cleaner as a favor. Well things went really bad. Because the temperature of the self cleaner was too much for the oven and explode and the inside glass shattered. This is not a product that you would want in your home or would recommend for anyone to buy. They do not stand by their product either. Please do not risk your familys life.

The microwave (wmh32519fs) is about a little a year old. It intermittently will not start with the message close/open door. Called Whirlpool. They refused to repair because it is out of warranty (1 year). I am fed up with this issue and probably buying a new one but not Whirlpool, a crappy product!

We purchased this washer in April two years ago. I have had service people out twice to replace the lid. Tonight, my husband comes into the kitchen with chunks of something that I could not readily identify. He tells me the entire frame holding the light has rusted out and that the light is hanging into the tub! I followed him into our air conditioned interior laundry room and placed my hand under the rim. It’s filled with rust and the light is dangling down into the tub!

Hi team, I have to lodge this complaint after because of getting continuous problems I have suffered with my Whirlpool fully automatic washing machine top load 11 kg bloom wash 360 degree. I purchased the abovesaid brand new washing machine on 1st Jan 2017. Since the purchase I am struggling with this machine. I raised the fault in the beginning itself and the service was done on 5th of Feb. Jobs sheets enclosed here with.Similar issues kept on arising and whenever I raised those issues with the whirlpool team, they mentioned that company policy is to repair the faulty part if it’s in warranty and they will not replace. They suggested me to go for the AMC and to be on the safer side, I also took AMC under warranty period only. (AMC card - My cheque dates and service details all are mentioned onto it.) Recently I faced another issue on 26th Feb for which ticket was raised. Engineer visited on 27th Feb and advised us to replace the motor part. On 3rd March they replaced motor mechanism and ball-bearings. Then engineer advised us to check the working by giving a trial wash.I started the machine to wash clothes and after 20 mins machine started making abnormal noise. (I have made video of it, audio of the video captured the noise). I again called up the service engineer immediately and informed him about the voice coming out of machine and he gave a lame answer by saying “It is normal sound”. Then I again called Whirlpool and requested senior engineer visit to resolve the issue. Senior engineer visited and told us that one of motor screw wasn’t tighten properly. It opened while running the machine which completely damaged the motor.After that I am continuously calling to service centre to get the updates on my machine motor replacement. Finally they mentioned that they dont have motor part available with them due to company ceased this model productivity. When I raised this issue with the Whirlpool team they mentioned that they can only pay 40% of the machine value, because I had AMC. However, I did mention that this damage is caused by the negligence of their service engineer, but they didn’t discuss anything about it.When I continuously chased them they dropped me an email to refund only the 40% of the machine value. I feel cheated and harassed!! When I bought the machine they gave us 10 years warranty now they mention that motor is not available as it’s a 5 years old model. My grievance is that since I had already taken the AMC and the damage was also caused by their engineer, why I have to bear the loss. I have already struggled a lot with this machine since last 5 years from the day I bought this machine and now I am losing my hard earned money. Kindly do the needful. Documents attached as follows: 1. Serial number of this machine 2. Bill/ Invoice copy from dealer 3. Job sheets4. AMC card (with 3 years extended warranty) Thanks,Pratibha

We bought a Whirlpool Cabrio 6300 washer based off the salesmans recommendation (not very happy about this). After the warranty ran out, every time in the spin cycle, it makes a sound similar to a piece of metal banging around inside the cylinder during the cycle. Our friends have told us they had a similar experience and for their machine, they found out the bearings were going out. Weve had this machine a total of 3 years. I doubt we ever buy another item from HH Gregg plus will do our investigation on Consumer Buyers digest before we toss any more money out for a washing machine.

We purchased a Whirlpool dryer almost three yeas ago. Its a front load, steam dryer--or WAS should I say. Almost a year ago, I was unable to calibrate the control panel (in other words, to change the cycle). Ive been advised by the tech that I need a new control panel $200. Really Whirlpool??? A $500 dryer that lasts two years?

The machine purchased in 2011, 3 years old, will cost as much to repair as to buy a new one. I got exactly no satisfaction from Whirlpool. They said there is no recall so they wouldnt assist. There are only 2 people in my house, so how could the washer be so junky. What would a large family do? I have spent $140 and wont spend another dime on a Whirlpool appliance.

We purchased the Whirlpool Duet (front loader) washer and dryer in 2005 from Best Buy. We had many problems with the washer leaking around the front door. After several visits, Best Buy (in 2007) said we could pick out a new washer. We picked out the Whirlpool Cabrio. About 2 years later the mother board had to be replaced on the Cabrio. We are constantly getting F codes and have to unplug the washer several times for it to reset. It also sounds like a plane getting ready to take off and from what I read that repair is very costly. It has been leaking as well. I contacted Whirlpool today and they informed me that there was no recall on the machine and when I told them that there were many complaints for the same issues online, they said they do not base their recalls on blogs and to fix the problem, I would have to incur the cost. This machine is the biggest piece of junk that I have ever owned. I will be sure not purchase a Whirlpool in the future!

We bought our Whirlpool Cabrio Platinum top-loading high efficiency machine Model #WTW8000BWG in Feb. 2015. It cleans well, and is easy to select water temp, spin speed, etc. It's simple to load, but because I am short, I have difficulty reaching stuff at the bottom of the tub. A stool is needed. LOL. In the 5 years that I have owned it, I have not needed any kind of service to be done on it. Very reliable. I have had Whirlpool washers and dryers before and my success with them is why I purchased the set I have now. And so far, so good. Highly recommend.

I bought a Whirlpool washer and after a few months it started acting up when spinning. I contacted your so called customer service and they gave me the runaround. Told me I wasnt loading it right. Im 60, I know how to load a washer. Well it got worse and worse and finally went kaput. Its going to cost over $100 to fix the springs and I was told it was your lemon and all that brand was bad. I will never buy another Whirlpool product because you wont stand behind them....

Three years ago I bought a Whirlpool 22 cf bottom freezer (GB2FHDXWB02) & within 2 weeks it developed its first problem. Ive had service men out 3 times (on an extended warranty) for ice buildup and leakage, presumably from the icemaker, and the problem hasnt been solved yet. I tried to open the freezer tonight and the handle pulled off in my hands, nearly sending me head over heels. This thing is a major lemon!!! Dont get me wrong: I love the design! It looks good, keeps everything at the right temps & the bottom freezer is a great idea. Id buy the same design again if I could guarantee no leakage and a handle that wont separate from the door. Now Im having problems getting the repair service to come out here again, despite the warranty. Meanwhile, the fridge is leaking onto the wood laminate floor causing damage. I just replaced an ancient dishwasher & my old Whirlpool glasstop stove after its oven failed. I cant afford a new fridge too.

This range is easy to clean, easy to use, multi functional burners, easy to use oven and very nice looking. We use propane instead of natural gas and the conversion was quick and efficient. We absolutely love the griddle.

I bought a Cabrio washer in late 2015. All Ive had is trouble with this joke of a product. After three years it wont do any cycle, the people at Whirlpool dont care. Please dont buy any Whirlpool product.

I had noticed water on the floor and just thought someone left the freezer open. It started happening about every other day. I read online that it was probably from the drain in the bottom on the freezer being clogged or frozen, and I found instructions on how to fix it. After we took the door off, the drawers out, and the back panel off, then we started thawing the drain. Finally, I got it cleared out. Here I am, a month later, there’s water on the floor again.

Whirlpool Dishwasher is 5 years old. Used in a one-person household where dishes are washed approx.. every four days (rinsed before placing in d/washer.) Recently at completion of cycle, 2 of water remained on the bottom (still there.) Whirlpool told me it sounds like I need a new pump, the cost of which would be approx. $300 (tech visit and evaluation, parts and labor.) I understand appliances dont last forever but I expected more than five years.

Purchased a Whirlpool dishwasher less than 2 years ago, began noticing a mildew buildup inside. Cleaned it, and bought dishwasher cleaner products, but the problem continued. Realized the dishwasher heater was not working. The dishwasher was staying wet, therefore causing mold. Called appliance repair, and spent 3/4 of the price of the 2 year old dishwasher to repair it. The control box malfunctioned. I was told by the repairman that that was unusual. At the suggestion of the repairman called Whirlpool. I was told since it was beyond the 1 year warranty they will comp us nothing. As a consumer I have no other recourse but to warn others, and to never buy a Whirlpool product again!

My microwave is a Whirlpool WMC10511AW purchased in Jan 2014 for $150. It is very light weight and moves around when opening and closing the door. I have to use something behind it on the counter top to keep from moving backward and causing problems getting things in and out. In the first year we had problems with the door latch, but after a while it stopped being a problem. I am used to the stability of Amana Radarange so these very lightweight microwaves seem really cheap to me. It works fine at this point but it seems that these really inexpensive countertop microwaves have to be replaced about every 2-3 years where an Amana which costs a lot more lasts for around 20 years and are very stable not moving around all the time.

I am having problems with my Whirlpool Water Heater. The pilot light goes off often and now it wont stay lit at all. I checked the thermocouple and measured the voltage, it is 19+ mV. So according to the manual, the gas valve/thermostat must have gone bad. I called the company and they gave me a name of the contractor but asked me to pay for the labor cost. This is a 50 gallon, 12-year rated heater bought from Lows in 2008. The heaters model number is BFG1J5040T3NOV. This thing has some serious quality issues.

I bought a Whirlpool Cabrio Top Load washing machine September of 2012. It has never cleaned the clothes well. For the last month the machine has a very loud spin cycle. I am very unhappy with this purchase and it is 2 months out of warranty. I emailed WHIRLPOOL and was told that all appliances have problems and wear out. WOW! It is 14 months old and has been used with care. I will never buy another Whirlpool product.

Eleven months after purchasing a Whirlpool refrigerator for our office lunch room it stopped working. While the refrigerator was still under warranty, I called Whirlpool for a service call. I was informed that the warranty is voided because the unit is located at a business and not a residential property. I explained to the customer service agent that there is no mention of this policy until after the appliance is purchased. After a considerable amount of time on the phone speaking with several supervisors, I was connected to a Resolution Specialist. She informed me that this policy is available online for consumers to view prior to purchasing Whirlpool appliances and it is the consumers Due Diligence to research warranty policies before purchasing. Consumers beware! Warranties are voided on all Whirlpool appliances that are located at a business address.

I bought this Whirlpool Cabrio Top Load Washing Machine in December and have hated it ever since. The energy efficiency this item claims means that you will spend a ridiculous amount of time waiting for your load to finish. My family hates this machine and I regularly have to hear about how long the load is taking because the timer adjusts continually. Put in a QUICK load and it said 38 minutes, came back in 30 and it said 24 minutes. It is so frustrating!!! We are afraid to put anything on a heavy soil setting or anything other than quick, because it can take 2-3 hours to complete. I have to schedule a day to wash my bedding and there isnt any convenience in doing a quick load. I am going to have to sell this one and purchase another washer. What a loss!! This machine has been a time and money waster! I will NEVER BUY WHIRLPOOL again!!! I bought this machine through Best Buy.

On December 24, I was planning my annual Christmas Eve dinner when my oven just decided to quit working completely. This was the third time my oven broke down on me. I called Whirlpool and they pretty much told me theyll get to me when they can but it was the holiday. So I understood that it would be a few days. I had a technician come out to my house on December 27 and tell me that he needed to order a fuse. He called all over the state to find one but no one had one so he put it as an emergency. The technician did everything he could to accommodate me but could only do so much. So I waited and waited but heard nothing.Today, January 3, I called the department to see when my part was going to be here and they tell me January 10 - unacceptable. I called the management team and spoke with Tiffany who pretty much just told me, Sorry. You have to wait five business days to find out if the part is available. If not, then we can discuss sending new ovens. Why would we have to wait five business days from January 3 when it was ordered on December 27? Look, Im a very reasonable woman and this is the first time I have ever complained online about a company. But I have gone 10 days without an oven and I have a family that I cook for daily.My ovens are four months old so this should not be happening. And when it does, there should be parts to fix it or a replacement on hand because no family should have to go without an oven when they just paid a ** load of money for it. Customer Service should be a little more sympathetic and a little less about business because at the end of the day, theyre not the ones suffering, we are. Also if this part is on back order, that tells me that this probably happens often. Maybe Whirlpool should recall this oven model because whoever heard of an oven overheating? Get it together. I will spread the word of mouth about my experience!

My dishwasher is just under 3 years old. It has never cleaned well and doesnt dry well at all. I have replaced parts for the top rail 4x. I have 4 other Wp appliances and none are good. The plastic parts in these appliances are beyond cheap and yet they have no problem selling them at a premium. And they also do not stand by their products. Why in the world would you need an extended warranty to get you through 3 years? In other words they make crap and want you to pay them because their stuff is crap... Im done with Whirlpool.

I bought the Whirlpool French 4 door fridge WRX988SIBM 01. I like the way it stores and layout (other than the icemaker taking the entire left door out). But I got a lemon, I bought the Lowes 5 year warranty (with the 4 repairs replacement). The fourth repair and dead declaration was 5 years and a week (so just out of Lowes extended warranty by a week). The Death Certificate repair guy said they dont make em like they used to. So I am now buying another fridge - trying Samsung this time. Every fridge has a lemon once in awhile and with my luck... Well you can thank me for taking it off your hands! :) I am averaging 5 years per fridge. Thats a lot of money and I expect to get at least 10 years life on a major appliance.

Whirlpool Cabrio washer - Do not buy this washer. I have never placed a comment on the web before, but after reading about the same problems over and over, there should be a class action suit. The spin cycle will not balance. You have to stand over the washer and readjust the laundry. I called Whirlpool and I was told to unplug unit for 5 mins. This is a $800 washer that lasted about 2 years.

Worst company for home appliance... I got my fridge repaired from an authorized service person and next day it again stopped functioning. Upon calling the service center again, they said that few more things needs to be repaired once again and for that fridge needs to be moved to their workshop and for that they will be charging 1600 Rs again. Upon asking for the refund for the useless spare part, the rude service person said ek din k liye to chale tha na fridge, fir kis baat ka refund... Such a ** company is Whirlpool that they are not entertaining any complaint on their all India customer care number...

My washer worked less than a year. I finally called Whirlpool and they basically said, were a big company and you must for the rusty, broken drive shaft, pay for all new computer face plate, and service repair. I contacted the FTC and they told me they needed more complaints in order to make them do a recall on Cabrios. Good luck!

I bought a semi automatic washing machine from Croma Store (Gurgaon) on 03/09/12 Model no A-72H* and I regret to say that the water direction changing knob (to change water flow from agitator to dryer), has broken. The machine is not even 4 months old and the water inlet is broken. How can this happen in a brand new washing machine? You claim to have durable home appliances products and your machine does not last 6 months? Can you see that the broken piece is attended to or replaced at the earliest?

Just bought two new Whirlpool water heaters, $469 each. Not impressed. One of the MANY issues: water leaking from the top. Reason: before installing, if you look inside female threads, you may see a rubber gasket (heat loss valve). One of the two heaters of mine was missing one. This showed me what the quality of the joint was like under the gasket. I temporarily removed the other three (two heaters) to confirm what I saw: At the backside of the threads there should be a clean flat landing from which to the male nipple should tighten against (washer in-between). Instead, there is a disaster of a flimsey lip (washer-like) which is torn up and not anything close to flush. Bad Whirlpool! Bad quality control!

My 15 year old front loader quit working and was going to cost more to repair than we thought was worth it. So, we went shopping at Home Depot and based on discussions with salespeople ended up with the Whirlpool cabrio toploader. What a mistake. I am so disgusted with this washer I dont even know where to start. If there was any way we could return it we would do so. The clothes come out wrinkled, twisted, absolutely covered in pet hair and detergent and fabric softener residue. Yes, Im using HE detergent, in the correct amounts. Yes, Ive read the manual front to back. Yes, Ive tried all the troubleshooting suggestions. No, they dont make a damn bit of difference.I would give anything to have my old front loader back. It was a great little machine that did a wonderful job of cleaning our laundry. Pet hair was washed off, I could lay things out to dry and they werent all wrinkly and did not require ironing. Just about everything that comes out of this cabrio machine that I lay to dry needs to be ironed before it can be worn. It is just a horrible, horrible machine and Whirlpool should be ashamed of themselves for foisting this off on unsuspecting consumers.

After the pilot light on my water heater would no longer stay lit, I contacted the Whirlpool technical support number listed on the unit only to be told my unit was still under warranty, but I would be responsible to pay a $65 diagnostic fee and any labor associated with a repair. The technician came and said my ventilation system was the problem and didnt even touch the unit. He then sent a report to Whirlpool that the unit was flooded which voided my warranty. He did not submit photos to substantiate his water damage claim and now Im being told the unit is unsafe and must be replaced at my expense. This all sounds like collusion to not honor the warranty! I will never purchase a Whirlpool product again!

Whirlpool Cabrio 4.3-cu ft High-Efficiency Top-Load Washer - I wanted to buy American. My Sears front loader (I had for 13 years) died and I couldnt get someone from Sears here to fix it. So I bought this Whirlpool from Lowes 4/20/15. I want to be able to wash sheets, towels, clothing and sometimes a blanket or a sleeping bag. I re-use my washer water for the garden and use no chemicals or fragrance in my washer soap. When I bought this, my washer had died. I was kinda desperate to buy a new washer. I went to Best Buy and Home Depot. There were ads all over Lowes advertising: Same Day Free Delivery + Installation. While there was no one in the Appliance department, I went to track someone down so I could pay and get out of there. I was told that it would take 10 days to get any of the washers I was interested. I didnt have 10 days, so I called my appliance repairman and he came to get the washer and install it. The deal breaker is that this machine vibrates the clothes clean - not water, so the fabrics are trashed and the sheets get all tied up. I had the factory repairman come and he told me you cant do comforters, more than a sheet or towels in this washer because its energy efficient! I should take my towels and sheets to a commercial place!! I called Whirlpool and wanted to exchange for another and they were not at all agreeable. No one else complains. Even after I looked on the internet for reviews on this machine 250 out of 350 had the same complaints as I did. I cant even donate this to a homeless or animal shelter if they dont suggest you wash sheets and towels in it!!! This rule was nowhere in the literature and the info on the top door doesnt say that either! Imagine my dissatisfaction!!! What homeowner doesnt wash towels and sheets???

I bought one of the top of the line Maytag washers and was very disappointed. It only lasted about 5 years and had to be replaced. The dryer I bought at the same time is still working. It is 15 years old.

I had whirlpool microwave model # WMH32517AS-2 that came with my new home in March of 2013. In September of 2013, we noticed there were times that the microwave failed to warm the food or liquids (coffee) sometimes at all. Then we figured out that we could hear the noise it makes when it actually warms the food. So after a repair man came out and saw the issue of not warming up, he replaced many parts but within a day we experienced the same issue. Whirlpool had a different repair man come out and replace additional parts hoping it would fix the issue but unfortunately, it did not. Whirlpool said they would send another microwave to us in January of 2014 but now its April 2014 and nothing sent and I have a broken microwave in my house. Due to the length of time it has been, I had to submit this. We have also called customer service on 5 occasions (who have these call documented) and the person that was supposedly helping us and assigned to our case 7 times with no response. We have attempted to talk to a supervisor but were told that I could not, which is unusual. Its just frustrating that this is happening.

We bought a Cabrio washer & dryer September 2010 for a room addition that wasnt completed yet. We didnt get moved in until the first of November. So the washer wasnt used until then. In January 2011 (15 months later) it stopped spinning so clothes were dripping wet. We called Whirlpool and were told that they would be happy to set us up for a service agreement for $322 for one year. We declined since we bought the washer for a little over $500. When we had a local Whirlpool service man come out and he determined that it was the control board which would cost $265 (Whirlpool only warrants parts 90 days). I sent an email to Whirlpool and was told too bad, so sad. We called their customer care line (that is really not the term for that phone center) and asked to talk to a supervisor, who essentially told me the same thing. Whirlpool is making equipment that is extremely poor quality. There is no incentive for them to produce a better quality product as they make money on the extended warranties that are necessary, or if you dont buy an extended warranty they charge an extraordinary huge price for their parts, which they dont warranty. We will never purchase anything made by Whirlpool. I am not sure where this useless piece of junk that I have will end up but I intend to let everyone I know what a terrible company Whirlpool is to deal with.

Having serious health issues with both our washer and dryer. I believe there should be an urgency and more serious resolution. Our washing machine is getting clothes trapped and producing friction causing excessive and heavy smoke from the drum. Our dryer has a random bolt/screw in the drum that catches and tears clothes. Although this doesnt happen on every cycle. It happens enough that it should be investigated, repaired and reported to Health Canada. I contacted Whirlpool on September 15th 2015 with my concerns. Nothing is being done! Ridiculous. WASHER Serial: HL23299429, DRYER Serial: M24507313.

I purchased a new Cabrio Washing Machine and Dryer in March 2015. I have had 3 new washing machines thanks to the Customer Service provided by Lowes in Lindale Texas. The third washing machine has again lost its brain and the sensor to operate the machine. I have been waiting for the parts since December 2. Called it is still on back order. Unacceptable! It cost almost $60 dollars every 2 weeks for our washing at the Laundromat. Again unacceptable. All Whirlpool can say is We are sorry. When the machine works my clothes are beautifully cleaned using the new HE soap. Takes large loads and I love that part.I am sorry I bought a Whirlpool. Whirlpool would not work with me except to apologize and say the parts are on back order and I will get a call in 5 days for an update. These machines cost $900 each plus tax. They should work more than 3 months at a time. The first repairman could not explain anything. Said they were too new and he could not figure out what to do. The second repairman was more knowledgeable and explained what was wrong. Does not help that Whirlpool does not have an inventory of parts to take care of their customers.

Whirlpool wdf530plym4 - Bought this dishwasher 5/13. Sat for 3 months in the box while my kitchen was being built. 7/14 pump motor went out, called Whirlpool, they set me up with an appliance repair company, and I ended up paying $90. The technician was being nice, charging me less than he needed to since he said it was an easy fix. 1/26/2015 pump motor went out again. Called Whirlpool again. Lady on phone was very snooty with me, telling me it was out of warranty. Told them I was very dissatisfied, my dishwasher has broken 2x in 18 months and all she said was, I should have bought the extended warranty. Dishwasher is not even 2 years old and already needs to be fixed 2x. The most expensive part on the machine I may add. Going my average, I can keep dumping $130 every 9 months to have a working dishwasher by Whirlpool. I would understand if the thing broke after 2 or 3 years. I only run the thing 2 or 3x a week at the most.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

Bought a dryer (wgd9050xw) 3 years ago. We bought a more expensive one than we had originally picked out. Every year its had to have a repair of same part. First year it was under warranty which tried to bill me so I had to dispute the charge. Charge was finally dropped. We just had it fixed again for third time in 3 years. Its a fire hazard because belt wears a pulley and basically melts it and gets belt hot. I just contacted Whirlpool and awaiting response.

I bought fridge model WRS571CIDm02. The worse company in the world. Since I bought this fridge have a consistent problem with the evaporator fan. It makes noise. Geek Squad came 3 time in 3 years to replace the same part. Now the 4th time I ran out of warranty and Whirlpool dont care. On top of that the stainless steel is rusting. It is not stainless steel. It is a nightmare. Avoid at all cost. If there is zero I would give it to them.

We purchased this washer in 2017, its the top loading Cabrio washer and it has been nothing but junk since day one. Purchased from RC Wiley in Boise and unfortunately did not buy the extended warranty because we trusted that this American company would make a washer that would last longer than 3 yrs. This washer barely washes clothes, leaves a residue on them since there is no agitator, also constantly gets unbalanced or gives and error of LF which means water supply issue when there isnt one. My 15 yr old about has a heart attack when he uses the quick setting and his clothes arent done in an hour and a half. Ive even resorted to turning the thing on to just rinse and spin so things get done sooner, still the stupid washer just sits. I would sell it but I dont want to pass on the pain, so its going to the dump to or to Goodwill cause its not worth the headache. Too bad you cant trust an American company to make a good product. Sad I really wanted to like this washer.

Refrigerator door display cable failed. The company declared refrigerator is beyond repair. Cable must be replaceable, we cannot throw refrigerator for small fault. The cost of cable is hardly Rs. 200 and refrigerator cost is Rs 25000. It is a design fault. Company has to replace cable.

Purchased water heater in 2005 with a lifetime warranty. We had our first problem May 30, 2013. Water would not heat above lukewarm. Called Whirlpool. Our plumber and Whirlpool determined that the temp sensor was defective. Plumber took it off and it appeared it had shorted out as the wires were black and plastic coating had slightly melted in one spot. We had replacement part in 24 hours. Licensed Plumber did repair (2 hours @ $75/hr = $150). Second problem occurred October 23, 2013. Not even 5 months later! No hot water. Hit reset button, turned temp up. No change. The diagnostic light on water heater indicated it was the same problem as before. Called Whirlpool. They sent out repair part which arrived in 24 hours. Licensed Plumber repaired (1.5 hours @ $75/hour = $112.50).I took a picture of the melted plastic caps where the wires screw into, of the housing around the wires, of the melted, charcoal crispy black of the Junction Box in the area that was directly above and covered the wires and sensor panel. It was much worse than last time. Plumber said that the part that screwed into the plastic cap had to be pried out and it broke off. You could see that this might be the spot where the problem started. We feel fortunate that we didnt have an electrical fire start from this problem. Something isnt right. Within less than 5 months, we have spent $262.50 to repair a water heater that has a lifetime warranty. Id like to give this 0 stars. Whirlpool owes us $262.50 and it might be more before this is all said and done.

I have owned a Whirlpool Gold Series Refrigerator for one year and 9 months. During that time I have had 7 repair issues. Each of the past ones took at least two weeks to repair. This past repair has to be redone because the new parts are also bad. The part is now on factory backorder. It will be at least two months for this to be repaired. Whirlpool says its too bad, we just have to deal with being without a working refrigerator for months. Do not buy this product!!! The warranty only means that you are forced to wait months for repairs. They will not replace, refund, or even extend the warranty for all this downtime. You have no recourse with the company.

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

My Whirlpool refrigerator/freezer stopped cooling just after a year. I had to buy a $319 warranty. It was fixed, but broke several months later. The repairman said he would try to stop the leak and it worked for a couple more months. The refrigerator was obviously irreparable and we should have had it replaced by Whirlpool at this point. Now, that it broke again (stopped cooling and freezing) the repair service is giving us the runaround. Its over a week and they wanted us to call a repair service and they would reimburse them. The repair service and Whirlwind know about this problem, but refuse to acknowledge it and are getting away with it. With all the comments Im reading here, there should definitely be a recall. Id like to know what it takes to have one authorized.

We purchased our Whirlpool Cabrio platinum washer about 3 years ago. I am completely frustrated with it. When it is on spin cycle, it sounds like a freight train going through my house. During the rest of the washing... it squeaks. And right now this is the 5th attempt to wash the same load of laundry. Because it keeps getting unlevel and it will not continue after I move the clothes around to get it level. So I have to start all over. There is not a spin cycle option that is available by itself. Every time I have to choose the rinse/drain/spin option. Obviously it is not under warranty anymore! Only a one year warranty... really pathetic! And when we called they offered us a little discount to buy another one. No thank you!!! Wont ever buy Whirlpool again.

Purchased 2 years ago from Lowes with the matching dryer. This machine (Model #WTW8540BW0) has more problems than the Bosch front load that I replaced. All of my white clothing gets small rust colored lines on it. I am sure this is because the top of the bleach dispenser is lined with rust. I have never owned a washer that rusts (screws are also rusty). I will NEVER purchase another Whirlpool product.

Bought this dishwasher (Model No WDF530PAYB3) in 2013. First the plastic latch for the dishwasher detergent door broke. Then, the paint on the face of the door started to bubble, peel, and now is rusting. Next, the heating element broke. Lastly, it started leaked on my wood floor causing damage. 2013-2014 I bought that Dishwasher, Micro-Hood, Stove, Refrigerator, Washer, and Dryer all Whirlpool. All the kitchen appliances were Whirlpool Gold. They would not fix their product. Offered a discount on a new one as if I will ever buy Whirlpool again.

On December 21, it became clear that I needed to replace our 13-year old Rheem water heater. We decided to buy one from Lowes, 36 miles away and have a handy man install it. He installed the new Whirlpool 50 gal gas water heater with a 12-year warranty on Friday, the 22nd, but could not get it to stay lit. He called Whirlpool to troubleshoot. They said it could be one of two parts and that they would ship the parts on the Monday after Christmas. He asked who would install and they recommended a local plumber. He called that plumber but they indicated they did not do Whirlpool warranty work and would have to charge.On Monday, I called Whirlpool and was assured the parts would be shipped that day for overnight delivery. I confronted them about the local plumber not doing their warranty work so they set up an appointment with a company called A&E for Wednesday morning. On Tuesday morning, I called Whirlpool to get the tracking number on the parts and was told that they did not get shipped on Monday as promised but would be shipped that day, arriving by the end of the day Wednesday, too late for the appointment for installation.By Tuesday night, my wife got on this site and was appalled to read the numerous identical complaints. I decided that Wednesday morning that I would hire a plumber to remove the Whirlpool and install another so we would not have a lifetime of problems from Whirlpool. The plumber installed a different water heater. It started right up and we have had no problems since. I got an R or RA number from Whirlpool which I think they only gave me because the parts had not arrived on time and I returned the piece of ** to Lowes for a refund. Lowes has a seven-day return policy of these.

Purchased the fridge from hhregg in August/September 2012. Model G16FARXX. After less than three years of owning it, found out today that the compressor is shot and will have to be replaced. Replacement/repair costs are ~$900, almost as much as the fridge brand new. Chatted with customer support and then would/could not do anything. I feel ripped off. If it happened after 5 years of use, then my attitude would be different, but not a major component going out in less than 3 years.

Efficient. I like the look and the controls. I trust the Whirlpool brand, but have purchased other brands. This is probably the best dishwasher I have owned. My only regret is that it is louder than expected.

I had an addition added to my home in 9/2007, which included a new bathroom. A whirlpool hot water tank was added. This week, I woke up to no hot water, so I called the whirlpool customer number regarding the warranty on the model FG1F4034T3NOV. T hey told me the serial number shows its out of warranty, although I may have only had it since 2007. They also said there was a screen that needed to be clean under the bottom of, it that if not clean, would make it stop working. Since homeowners where not cleaning it, they have made a replacement door part that would fix it, and do away with the problem, but I would have to pay $35 for it. I asked them, since the serial number shows that the part has not been replaced on this unit, why not just send it to me, and I pay to have it put on. The person said no, you will have to pay for it if I wanted the part to fix it . Although my builder did not give me the receipt for it, thats just not right. If a manufacturer knows they are having problems with their product, which require a part replacement, and they have produced one, they should be willing to give the part to everyone with the product that request it. On top of that, this model has the left hand threaded thermocouple, which no one around seems to carry. I am totally disappointed with Whirlpool, and right now would not consider buying, or have any more of their products installed into my home.

I purchased a 40 gallon water heater at Lowes and installed about 3 years ago. A couple of weeks ago, it got an upper sensor failure code on the gas valve. It would heat by resetting (turning valve off, waiting a minute and then lighting) but after a few minutes, it would fail again. I called the customer service and they mailed out a new upper sensor. When it came a few days later (I paid for shipping), I installed it but the same failure code. Again, the only heat I could get was by resetting the valve several times before a shower. I called customer service again, told them what I did and they said, Oh, the problem is the gas valve then. So they mailed out a new gas valve unit. It then came a few days later and I installed it according to the enclosed directions to the letter. Still got the failure code and still had to keep resetting it to get any warm water before a shower.I called customer service again, told them what I did and he said, Well, did you flush the water heater with apple cider vinegar before you installed the new gas valve? I said, No, it wasnt in the enclosed directions to do so. He said, You should have done that and it would have worked. I will send out a new gas valve. At this point, I blew up. Two weeks with no reliable hot water. I told him I want a new water heater and he refused. I asked to speak to his superior. He said no. Dont ever get a Whirlpool product. Some other crappy company builds these turds.

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

Whirlpool gold series refrigerator - We obtained this appliance in 2013. The ice maker stopped making ice. Later on it began to make super loud popping noises. Stops cooling, doors are rusting, drawers are broken. We do not have extra money for costly repairs. The Whirlpool brand was worth $2500 and the letdown priceless. Do your homework before purchasing a Whirlpool!!

Whirlpool Gold Fridge - For all the people who have water collecting at the bottom of their freezer... There is a plug in the drain pan underneath that needs to be removed. It comes that way from the factory. Thank God, I have a smart Hubby and Father-in-Law. I find it INSANE that these Repair people have not caught on or do they just want to keep billing for Service Calls.

Very disappointed with this product as well as Whirlpools handling of the situation. I purchased this item 9/15. Its now 10/16 and the plastic that surrounds the glass on the shelves has cracked on 3 of the 4 shelves. The company will not replace because the warranty time has run out. The cost to replace and ship is around $500.00. Big disappointment.

Ive read the reviews on this appliance. First of all the all of the washing machine being manufactured are designed to save energy and water. The water is loaded in the machine based on the WEIGHT of the clothes. the washing machines no longer have the features to (small, medium, large load) so the consumer can fill the machine. Having said that, most sales representatives will tell you appliances manufactured today are no longer designed to last 15-20 years, although they are way more expensive than the workhorses made in the past.I got rid of my fancy Samsung washing machine because it broke down at least 4 times within the first year of purchase and decided to go with the whirlpool because Ive had a workhorse in the past that was worked excellent. I love the fact the washers no longer have the agitator in the middle which allow me to wash my king sized bedding without the machine becoming unbalanced or making a lot of noise. So far the Whirlpool Cabrio washer and dryer is working very well. Id rather give the Whirlpool a chance any day over the new johnny come latelys, which are more aesthetically pleasing to the eyes but are failing miserably in performance. I also love my Cabrio 8.8 dryer. They both work better than the Samsung models I got rid of.

I have a model ED20PK. The doors are rusting on the outside.This refrigerator was purchased by my husband who has passed, I do not have the receipt and I dont know where he purchased it. The refrigerator worked perfect. It has been in my kitchen from day of purchase. My home is adequately heated in winter and air conditioned in the summer. I have an up-scale home. I dont see any reason to replace the refrigerator, but I cannot stand the deteriorating condition of the doors.If I replace it, I will not buy a Whirlpool or any brand made by Whirlpool.The rust is not just a discoloration, it is actually rough to the touch and is getting worse day by day. If you have any answers or help I would appreciate a phone call. I am not really in an economic position to just go and buy a new refrigerator.

I have had no issues with my washing machine. Love the different settings. Washes clothes well. Dryer has minor issues like the drying dial stopped moving so I need to manually turn it off. It’s more of an inconvenience, but for the price it should work.

We bought a Roper refrigerator about seven years ago. Less than two months later two of the cheap plastic door shelves broke and we had to buy replacements at over $20 a piece. Since then weve had to replace one more. Tonight another one broke so well have to fork over another $20+ to replace this one. I checked the Whirlpool website and they have the exact same flimsy plastic shelves as the Roper. I will be in the market to purchase at least three refrigerators in the next two years and you can bet that they wont be either Roper or Whirlpool. My advice to anyone in the market for a refrigerator to steer clear of these two brands as their shelving is cheap and shoddy.

The door can be slightly open on the model GSC25C4EYY02, and the alarm will not register. Ive come home on too many occasions to find the food no longer at a desirable temperature. Im very bummed about this refrigerator choice. The refrigerator door open alarm is useless.

I bought a whirlpool washer because we thought it was the best. It does not clean our clothes especially my husbands jeans. They are on their third wash at this minute. I use Gain HE detergent. I bought clorox 2, I use spray & wash & I have even started using a little clorox but the red dirt still doesnt come out. I never had this problem with my old washer. If there is any help for me here please let me know. If this is supposed to be a water saver I dont see how I have saved any after washing jeans for the third time. If they are not clean this time, I guess he will wear them dirty.

We bought the Cabrio washer and dryer on June 2008, and it wasnt very long after that, that we had to have a repair done. Then, it started twisting the clothes and the sheets into a big knot. Two king size sheets and 2 pillow cases got so twisted that they are no bigger than a watermelon, and believe me, they are very hard to untangle when they are soaking wet. The machine in the drying cycle sounds like a commercial jet taking off. We can hardly talk above the roar of that thing. I hate it with a passion. Whirlpool used to be all we bought, but that is going to change.Linda

I love my Whirlpool Washing machine. Purchased it 2 yrs ago & have not had any issues. Its quiet, large capacity. Washes my clothes very clean. The various washing cycles makes it so convenient to wash as much or as little as I need on any occasion. I do recommend to anyone that you do the cleaning cycle on these new washers to ensure top performance when washing.

The washer can not spin dry, as the unit will not balance. When it spins, it will get out of balance, and shuts off. I have had a repairman out, but he said he can not fix it, and that this is common with your units, He suggested we get a new one, but not from Whirlpool.

I have a double door bottom freezer refrigerator manufactured by whirlpool. It is less than 2 years old and is an absolute piece of garbage! In less than a year the noise started, then the freezer became a refrigerator and my frozen stuff melted. I had a local technician come in and he fixed it but he indicated that the fix would not likely correct the problem. Sure enough, about 6 months later the same problem started all over again. Nowadays one is never sure where a product is manufactured. However, if Whirlpool had their products made by chimpanzees in the jungle they would be better than the pieces of trash they are now selling!

Cabrio washer - I have always had a Whirlpool appliances and have always been satisfied with them, but this is the worst washer ever manufactured. I bought it to wash heavy loads of jeans and it takes me all day to wash 1 load because it is always out of balance. No matter what setting I put it on I have to keep rearranging the load. Without putting up with that, the load takes 87 minutes on bulky wash. That is far too long and then you add all the time I spend rearranging it to get it to work. I think there should be a recall or at least admit you have a poor design. My son works for Whirlpool, but Im not sure I will be supporting this company again.

I have a rental home and my residence, I have purchased a fridge for BOTH places. Within 1.5 years, both of the fridges shelving cracked. Customer service will not do anything to remedy this. It is a known issue with his model of appliance. There are numerous complaints and they DO NOT stand behind heir product. NEVER BUY WHIRLPOOL.

Whirlpool Washing machine Model WTW4800XQ1 - This machine ran fine for the first 6 months, even though my old machine took 40 minutes for a large load and this one takes an hour. Then, I had to call the repairman out and he said it was the fill valve. He didnt have one on the truck and said he should get it in within 3-5 days. Well a month later, I had to call Lowes again to find out what the problem was. They had him back out with the part within 2 days. Then, I had to call again. This time the repairman ran a test and found a bad spin motor, he had the part on truck. Third time to call and the machine is back to not spinning out properly. My old machine lasted over 14 years. Whats wrong with these new ones?

We purchased all our appliances from Flecks - there were to be rebates. Also never received them. We have had our oven for 2 years - when I set the oven on 350 it will go up to 400 degrees & the temperature on the front of the stove is 350 then it will drop down to as low as 250 & the temperature will still say its still 350. I called the company - did will do nothing. Will cost me as much to fix it as to get a new one. This a Whirlpool oven.

Bought a new set of Whirlpool Cabrio Platinum tin replace my Maytag that had finally died. I believe this is the worst set Ive ever owned. It wasnt inexpensive but its cheaply built. Cant wash a set of sheets without it getting out of balance, even if you carefully place them in the washer as they recommend. They knock up no matter what you do. The dryer is gas and my clothes still have to be turned back on for more time that should take. We are talking about over an hour. Ive had them just a few months but Ive had it. I want my washer and dryer to just do their jobs like you expect. Im selling them or donating them but whichever they are out of here. Whirlpool, I am ashamed of you. Putting out such a poorly made washer and dryer. Instead of the name Platinum. They should be named Salvage. Never again Whirlpool. Never Again!!!

My not yet 3yr old ($2100.00) Whirlpool refrigerator started having problems. I thought it was related to the ice maker. When the repairman came out, he said it had leaked the Freon, so I thought it should have been a simple fix. Boy was I wrong. It turns out it has a sealed system so no one can access this to fix it. It is now junk and I have to buy a new one. I will never purchase Whirlpool anything ever again and I will also tell anyone who will listen about my experience. My repairman said this happens all the time, and 7 or 8 yrs ago Whirlpool went from being one of the top models to being junk.

I was very excited about the performance of the washer as far as reduced water usage and reduced electric usage. After about 6 months though, I couldnt figure out why a lot of clothes, sheets and drapes came out with streaks on them. Very expensive to replace! Of course, the business I bought them from tried to get me to buy all types of fixes that had nothing to do with the problem and therefore couldnt answer me why this was happening. I am not crazy about a lengthy lawsuit. I am crazy about hoping the washer dies so I can go back to a less fancy washer that did the job better than this expensive monster!

I had this stove for less than 3 months and the glass top broke after turning on the stove. Now I tried to find out how to purchase a replacement but it cost as much as a new stove....Ughhhh this is so aggravating.

I purchased this washer over 8 years ago and we have been using it 3 to 4 times a week/ 52 weeks a year since. It has performed flawlessly up until about a year ago when it kept given me uL error. Everytime I wash the basket always spins wobbly and unbalanced it seems. I checked the Internet and it turns out others have had the same problem. The solution was to replaced the 4 springs supporting basket and that fixed the problem. Been working ever since.

A whirlpool water heater model FG1F5040T3 purchased from Lowes five years ago developed problems, which could not be fixed. My problems started two weeks ago when the pilot light would not stay lit eight hours at a time and then nothing. Having a service plan through our utilities, they were notified not once but as it stands now, 6 times. Six techs have been out to my house and replaced the thermocouple twice and a complete gas control valve. The pilot still will not stay lit. Supervisor contacted Whirlpool on Thursday. Now its Saturday and no word from Whirlpool and no hot water. Try to get assistance from Whirlpool after work hours and it is impossible. This tells me that they do not care about their customer or the product that they make. Do not buy Whirlpool products!

I purchased my Whirlpool refrigerator from Whirlpool guest system (online) in 2010 for around $1,160. Recently, it stopped dispensing water from the dispenser. I called the Whirlpool certified A&E serviceman to repair the dispenser. He concluded that the water line is frozen inside the door. He also stated that such issues with the door shouldnt happen for at least 10 years. He gave me a bill of $920 to replace the door. I called Whirlpool and they declined to pay for the repair as it is out of warranty. I feel that they sold me a faulty refrigerator and they should pay for this expensive repair. With $920, I can probably pay for a new refrigerator (not Whirlpool, of course). I am completely disappointed by Whirlpools customer service and poor quality of their product. This company, I believe, is more interested in selling crappy products, make profit and not provide good customer service. Shame on you!

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.