Bought the above named model number Whirlpool dishwasher in Nov 2017 and it stopped cleaning 6 months later, dishes were instead of dry and NOW the motor is completely shot! Never again! This is ridiculous that the part cost more than the product! Worse that I need it repaired or a new one in less than 3 years!

I bought a Cabrio from Costo less than 2 years ago. Dryer so far so good (big barrel with hair dryer so what could go wrong?). Washing machine is HORRIBLE. Lid latch broke (couple hundred to repair). Now out of the blue I get an F2 error & machine is completely inoperable. I am only user & very careful with it. There should be a recall on this expensive junk. NEVER buy Cabrio or maybe any Whirlpool appliances again. Ive never written a bad review btw.

I purchased this Whirlpool Cabrio washer three months ago from hhgregg. If I hit the lottery, the first thing Im going to do is take it to the dump and buy a new washer. There is no way to wash a load of towels in this machine. I started a load at 7:35 this morning and it is now 9:53 and Im still dealing with the drain and spin cycles. Over and over, I try to get it to spin out enough water that I can put the towels in the dryer. I should have suspected something when I saw that the washer even had a separate drain and spin cycle. It should have told me something. Its a piece of junk. Never again. Im back to Kenmore.

I got my water heater 3/13/12. Ive had to restart it now 4 times & have been totally out of hot water for two months! How can I get help from you or Lowes? This thing is supposed to work for 6 years & I havent been able to keep it going for 6 months! Help please! Can I get a different one? This one hates me! Being widowed & having a metal hip, it’s hard to get safely into the attic to restart it and not sure it will work longer than 2 or 3 weeks! Ive been bathing in the kitchen because thats where the stove is! Thats the only way I have of having hot water, is on the stove! Thanks for listening!

Cabrio fabric washer and dryer sucks. I gave almost $500 for a piece of **. Doesnt get the clothes clean. Hell most of them dont even get wet. Its junk. Wouldnt have another one. Lowes junk and the dryer aint know better. Its always flashing check lint even when its clean and you have to ** with it just to get it to start.

These machines are designed to clean your clothes by rubbing them together which they attempt to do in a minute amount of water. They destroy the fabric, pull the seam out of shape, wrinkle them beyond the point of wearable, do not get them clean and do not get all the detergent out. I have had clothes come out partially dry. They also do not dilute the fabric softener, leaving unremovable stains on your clothes. In addition, they take forever to do a load of clothes even without the extra rinse you need if you want any hope of getting the clothes rinsed. The dryer is the slowest dryer I have ever had. The steam refresh that is supposed to get the hideous wrinkles out of your clothes does not put steam into the dryer. Instead, it sets the dryer to the highest heat so that those clothes you did not want on high heat are now getting it; then it shoots bursts, yes large bursts, of water on them. Your clothes come out a combination of still wrinkles and wet. If you hear of a class action suit, please contact me. These machines should be recalled.

Bought a Whirlpool 25 cu ft side by side in 2011 and now just 4 years later the compressor is bad. Called them and they only have a 1 year warranty, which is nothing for a compressor. They told me for $350 they could replace it and it be good for only a year. Not going to sink more money into a product even the company has no confidence in. The repairman advised to stay away from Whirlpool as they were not the company they used to be. Also the salesman at Lowes where it came from said they used to have a 5 year warranty but changed several years ago and the quality also went down. We have had refrigerators last 25 to 30 years in the past but no more thanks to modern technology. Thanks a lot. STAY AWAY FROM WHIRLPOOL!

We bought a Whirlpool washer and dryer set (Cabrio WED7300XWO) 2 years ago. Within that time, the door seal fell off and needed to be replaced. The drive belt pulley became detached, and now the drum seal has fallen out and had wrapped into the clothes. I have never experienced such a substandard product. We would trade back this one for our 15-year old set we had replaced it with at the drop of a hat. We are retired and have a summer home, and only use this product 4-5 months a year. Never again, Whirlpool!

French Door model WRF989SEAE01 - Fridge runs very loud after 3 weeks. Ice build up inside of fridge - back left. After numerous repairs, dealer replaced unit with new. Three weeks, loud noise again. After 7 months, the ice maker has quit, the freezer is thawing items, the fridge part is not cold enough (all settings have been boosted). Now Im concerned it is going to completely fail or burn our new house down. All new Whirlpool appliances in new home and this thing is proving to be extremely unreliable. Dealer is now out of loop (gave up) and told us to deal directly with Whirlpool. After 2 units and same issues, it has to be a design flaw.Can anyone start to move on a class action lawsuit or do I wait until it blows up or burns down the house? We are of retirement age, no kids, and our appliances have had NO ABUSE. Another acquaintance has same fridge about 2 years old and it has completely quit.

I just bought a new dishwasher because my 5-year-old one went out, model number DU1145XTPBA. After pulling the old one out, I took the motor out and lo and behold, what did I find but bad bearings. The motor was fine, just the bearings were rusted out and were jamming the motor so that it wouldnt move. The price of a new motor, $149.00. Well thats a bit much for something that only lasts 5 years. I went on eBay and found them for $70 to $170.00. So if you have a problem where your dish wont wash at all but fills up with water, it may be nothing more than cheap bearings in the motor. If I, myself, were this companys CEO i would really consider changing companies that they have making these motors or at least the bearings. Just wanted you to know that this is the only problem I have had with this one and Im going to replace the motor now that I know what it is. Thank you Whirlpool for a day spending repairing and replacing one of your dishwashers. I learned a lot.

Whirlpool Gas Range Model WFG524LAB0 - Purchased on 09/2013. Product works well but noticed back in July 2014 that cook top was not cleaning well. Did not mind it that much thinking it was just baked on grease and would just do a general cleaning when I get to it. After the holidays and now getting around to clean the range top, I discovered the cause of range top not cleaning well. The porcelain was chipping away.Today I called Whirlpool customer to complain and see what they do. They replied that it was just a cosmetic blemish and that was not covered under warranty. I told them that that cosmetic blemish lead to rusting and eventually result to failure of the product. They also said it was out of warranty but was eager to have a tech come over to check the problem out for additional fee.

I bought a brand new Whirlpool fridge early June with the extended warranty to have it shipped on my moving day on June 18. The team delivered and installed the fridge and told me to wait 3 hours before plugging it. I went and spent over 300$ in groceries only to find out the fridge does not work. I waited 24 hours, still not working. I had to wait until Monday to call the customer service because it is closed on weekends. I had to throw out all my food and order food all weekend which incurred an extra 200$. I called Whirlpool on Monday and was told a technician would only come on June 30th. 8 DAYS LATER!!!!I did some research and found a certified whirlpool technician myself who was able to come the next day only to find out the fridge has no gas and this is an assembly defect - WHIRLPOOLS FAULT. Whirlpool would have to send me a brand new fridge (These fridges are NOT TESTED?!). I was asked to call to arrange the exchange, I asked for compensation as I have already spent over 500$ and now would have to wait another week with no fridge and they refused to compensate....They told me I would get a call in the next 48 hours to let me know when I would get the new fridge and 3rd day later, still no call.I received a call on Friday to tell me they approved the exchange...Really now and would have to wait another week. That is over 2 weeks with no fridge, I sent a private message last week to Whirlpool, no answer, I spoke to customer service twice, they cant help me and do not want to compensate me. I have never been so frustrated and mistreated by a supposedly « reputable » company? WORST PRODUCT AND CUSTOMER SERVICE!!! DO NOT BUY!!!!

My mom got me and my children a new fridge side-by-side ice maker. We were hoping that since it was new, we would have it for a while, but 1 year and 1 month later, it is not making ice and changes temp for no reason. My fridge will, most of the time, keep cold; but then, there are those days that it doesnt. No one touched the temp, and since its been more than a year, Im stuck. How wonderful to spend all that money for a year and one month! We dont have a working ice maker, and also, I cant keep food good. I cant afford to throw food away. And my mom and I cant afford to get another one.

I purchased a Whirlpool 40 gallon gas water heater from Lowes approximately 4 years ago. As of yesterday, the pilot will not light. I assume the t-couple is bad. But in the process of doing some research, I could not help but see that there is a quality problem with heaters manufactured around the time mine was. I dont have the model number with me at the moment. I would like to know what the permanent fix is for these heaters.

Our whirlpool gas range has a defect - the material around the control panel is peeling and flaking; it is not possible to clean it and it is likely going to get into our food. It has not been cleaned with anything harsh - I use warm soapy water or stainless steel cleaner. I use the same thing on my other appliances and they look fine. I am waiting for a tech to come and look at it but after reading other complaints I fear that they are going to say it is cosmetic and it is not covered. Sadly, we can no longer wipe the control panel if it is dirty because the stainless steel is flaking off and it gets all over the burners and I am concerned it will get into our food. I am willing to bet the paint that is flaking off is not approved for consumption.I wish I had our old Frigidaire Gallery Series range back. I regret replacing it. Whirlpool was not helpful. They told me to contact the place I purchased it. The place I purchased it said it is a manufacturers defect. Someone suggested painting it with stainless steel colored spray paint which sounds like it is going to look awful. The new panel is $148 but it will need to be installed and if there is a defect how often will I have to replace it? I am very disappointed.

I love my dishwasher, have had no problems and it does a great job. Stainless steel interior is a plus. Give it a try, you will be satisfied with the performance.

I also have the same water running into the refrigerator problem that so many people have reported. Im about to throw the Whirlpool out and start over. It is such poor business that whirlpool wont admit that the appliance has a major problem and fess up to correcting it for owners. I will never buy another Whirlpool appliance and will warn everyone to also steer clear of Whirlpool.

I was searching online and stumbled across this site. Funny that there were so many complaints about the console on the ovens, considering that my issue was with the console on a dryer I purchased. I have only had the dryer a year, and it stopped working. There is nothing else wrong with it, no codes, no problems with the lights, or anything else. A technician came out and found that it was a small plastic and metal button piece that helps the press here: spot on the dryer panel to connect to the start button on the console. The little arm had broken and the switch no longer worked.Figured we would have to purchase a new button. NOPE, apparently we were told that we had to purchase a new console (over $200 dollars, close to $300 with shipping)???!!! We were also told that wear and tear can cause the issue. Wear and tear?? On a dryer thats maybe run once a week for about a year? Try again, I think I need my boots because it sounds like horse** to me. I think I will pass this information along to people I know that are technicians so that they can let people know not to purchase from this company because they obviously arent going to address the situation. I think I might also utilize social media to let people know so that they dont have to go through this much aggravation. I certainly dont know what we are going to do, since it took me a year to pay that dryer off, I cant afford another dryer at this time. So unfortunately with a new baby on the way, you wont get any sympathy from me if your company takes a character hit.

Pathetic pathetic service!!! Unsatisfactory service!!! First of all, I would like to tell everyone who ever reads this, that please please please never ever use any Whirlpool products, as their service sucks, their response sucks too, and zero co-operation from their people, which will make you regret to have used their products in future. Please note I registered a complaint on the whirlpool no. **.The complaint was that the washing machine used by us had issues, the power button/ on & off button had come out, and this was clearly stated while registering the complaint. I get a call from Mr. ** (Representative of shree enterprises bibwewadi, pune) and the power button issue was well informed to him as well over the phone by me. He arrived to our place without any new material, he sees the machine and interchanges the buttons, i.e. the broken power button is replaced by other button from my machine which was less used compared to the power button. I had to pay a sum of rs. 400/- for the pathetic service I received from your end.I expect a response from your side within next 4 hours, or I might have to escalate this issue!!! (Please note Whirlpool team that I had submitted the same on your website yesterday, yet I have not received any response from your side). (Whirlpool rating- 0 out of 100). Thanks. (And whoever reads this, please tell me where else can I post this review of mine so that I shall alert everyone that how bad whirlpool service is)...

Size was greatest consideration, then cost. Next was power consumption. Quality claims were of no value, since ALL are made in China/Korea. Korean made would be a better choice than China. Am satisfied, but not greatly, as refrig. bottom freezer died a few days out of warranty. YouTube video had my exact refrig. so fixed it myself. Bottom freezer drawer keeps coming off its slides, but I live with it. Top refrig. section freezes things on top shelf, but 2 and 3 shelves down, temp is 39 to 42 = cannot get even temp. As a former inspector, I know about air circulation, crowding.

Never ever go for Whirlpool. It has the worst customer service. We brought an oven but accidentally we broke the inner oven plate. We called up the customer care person on 18002081800 and tried asking him the dimensions of the plate pr at least how we could reorder it. He never listened to us. He just got our details. Said that technician will come at 11am tomorrow and disconnected the call when we were trying to explain what our query is all about. Is that all the respect a customer deserves!? Is that how whirlpool trains their service people!? He doesnt even have the basic courtesy to listen to the customer, I wonder how was he even recruited as a customer care person. If you want at least your basic respect, please DONT BUY WHIRLPOOL.

I bought Whirlpool dishwasher (silver, Golden Series), after one year it just stopped for nothing and the circuit controller failed with error code E2/F2. So it was expensive but turned out to be totally unreliable. I had to pay $200 to get extended warranty and still waiting for the parts!!! Worst experience ever (uh Golden Series, for me it is Plastic Series). Will never buy any product from this company again.

I purchased my Whirlpool refrigerator in March of 2011 and the ice dispenser failed in early April of 2012. I called Whirlpool and asked for a repair, but they refused, saying the refrigerator was out of warranty. Being a handy person and upset about the failure after only just over a year, I took the dispenser apart and found that a plastic part had broken and caused the ice door to become unhinged. I called Whirlpool back and explained what had happened, but they refused to help again. They transferred me to the parts department where I was told that the part that was broken was not available and the only thing I could do was replace the entire door! Not only is their product poorly designed, but it is also not easily repaired. I will never buy another Whirlpool appliance.

Seems to use very little water. When I take the clothes out, they are bone dry in places which means they havent even seen any water! Clean (?) clothes end up smelling musty and I end up having to wash them two or three times which completely goes against any eco argument! I am really disappointed with this product and would never buy Whirlpool again. I have just washed our dog blankets. The cycle finished so took them out, had to check that the detergent had been used as the blankets were almost completely dry. The blankets still completely smell of dog so have had to put them through another wash (with more detergent – waste of money) and with a pre-wash cycle. Rubbish! We also have a Whirlpool drier and that is no better. Washing never comes out completely dry. It always has to be fully aired, sometimes more than others. There is no consistency in how wet or dry the clothes come out. Avoid at all costs.

The American Standard 95% 2 stage variable furnace is by far my favorite furnace to install. I know exactly what to expect from this furnace and I have had zero factory issues with this model. Outside of making a few sheet metal transitions this American Standard standard 95% furnace was very easy to install as well. And like the 2 stage variable … no factory issues.

I bought this piece of junk Whirlpool Cabrio washer two years ago and it’s been nothing but junk. Just like everyone else, this thing has never gotten my clothes clean no matter what I do. Anything with a drawstring or straps gets ripped up or stretched out. It’s loud and shakes, even though it’s leveled. Now, to top it off, it’s leaking water from the basket seal. I called Whirlpool and they couldnt give a damn. Since it’s out of warranty, it’s my problem, even though she said they know this machine has a lot of problems. So now Im stuck either fixing this thing or buying a new washer. Every appliance in my house is a Whirlpool and Ive had nothing but problems with several of them. I thought when I bought the brand it was a good brand and they stood behind their stuff. Boy, was I wrong! I will never buy Whirlpool again! They should recall this washer!

My $800 Whirlpool Duet Sport Electric Dryer quit working less than 4 years from purchase and needs a new electronic control board. My service tech called Whirlpool to confirm that this is the problem because replacing the thermal fuse did not solve the fact that my dryer wasnt working: Code F01. Diagnosing and repairing the dryer will cost me $375! I am deeply disappointed. I will definitely explore other brands before ever trusting a Whirlpool appliance because I know the company could have done more such as offering to cover or discount the $210 control board, because everyone I have talked with (friends, family, my appliance service company manager, Whirlpool customer service rep) agreed that this is a rare problem and that your dryers are engineered to work 10-12 years. However, as a company, Whirlpool gets an ** for customer service.

Two Whirlpool washers in six years that the barren in back of tub goes out. When the first one went out in the same month the warranty expired, I was told by a repair man that it was not worth repairing because of the cost. I purchased a brand new Whirlpool and only months later, the same parts are broken on this new front loader. How cheap is the Whirlpool app. made? Whirlpool wants to only send me a tech. to fix washer instead of replacing unit altogether. After all, the unit is only a few months old. I cannot believe I have to deal with this again.

Whirlpool duet steam front loader - The rubber gasket ripped about a year ago and cost over $400 to have a tech come and repair. Then the water level switch got bad and cost another couple hundred. A year later, the rubber gasket ripped again. What a junk washer. I am ready for a lawsuit because Whirlpool will not replace it.

The washer constantly binds clothes around agitator. Truly a design flaw and it does not get clothes clean. So with a washer like this, I am forced to go to laundromat. Wished I would have paid 230.00 or so to have transmission fixed on old Kenmore. Truly dislike this substandard appliance.

Three years ago, 2008 we purchased a Whirlpool Gold refrigerator for our new house. Since we have had trouble with the ice maker and dispenser, we have had it repaired twice, the latest on Nov 31, 2011. We thought that perhaps it was only our problem. This past summer, we, along with some friends, rented a house in Water Color, Florida for a week. The house cost over $2M to construct and evidently they chose the same refrigerator we did, and guess what? They have the same problem. Just this week we were visiting some friends in Starkville, Mississippi and they had the same refrigerator with the same problems. Evidently this is a design problem and a poor one at that. I would neither buy another Whirlpool product nor would I recommend Whirlpool to anyone. I thought we were getting a quality product given the purchase price of this refrigerator. Indeed that is not the case.

This oven/range (W10665261B) has a cleaning feature that DOES NOT WORK! Do not buy unless you want to hand scrub the oven without any cleaning products. No one at the company cares. I will discard the oven.

I have had my washer & dryer about 12 yrs. It has given me great service; however the spin mechanism on the washer stopped one month ago. It was replaced thru my home appliance warranty. I need the front loader style because Im disabled now, and cant take clothes out of washer. My previous set was Kenmore & it lasted 20 years. Looking to purchase in 2 months.

My husband AND I purchased our Whirlpool Cabrio washer and dryer from Lowes in 2011 (Model # WTW7800XW2). About 10 months after I purchased this I noticed a hairline crack on the right side of the frame that holds the glass top near the hinge. I didnt think to much of this. I figured it may have been screwed to tight when manufactured. A few days ago I noticed the lid wasnt sitting flat and saw the crack had gotten much worse. The Cabrio lid is made with a heavy piece of glass inside a plastic frame allowing you to see through the top. Its pretty obvious that the plastic frame is not durable enough to hold the heavy piece of glass.I called Lowes and they told me that because I didnt purchase their extended warranty that I should contact Whirlpool. I called Whirlpool and was told it was a cosmetic defect because the washer still works. They also told me my washer is outside of its warranty so they would schedule someone to fix it but I was 100% responsible for the repair costs (which I found out will be $400). Out of curiosity I googled this issue online and found numerous people complaining about this exact same issue. When I told this to the customer service agent at Whirlpool, she said there werent enough people to recall the product. Why should I spend $400 when it was a design flaw that caused this problem? I found out the year after my washer was made, the lid was redesigned with a much sturdier frame, Coincidence? I think not!I havent had any problems thus far with the dryer but with the experience Ive had with this washer will make me never by another Whirlpool product again. I cant believe they wont stand by their product! Obviously they know this has been a major complaint on this model from 2011 because it was changed the following year. I have purchased many Whirlpool appliances over the years but dealing with this issues has been frustrating. Im so disappointed in Whirlpool and their lack of integrity!

Initially felt the burners and oven took a LONG time to heat up, but just accepted it. After a year and a half, the motherboard died. The part alone was almost $400 and labor $100. The self clean does not work very well. Glass top is very hard to clean. It has a large oven space and looks nice, but would avoid Whirlpool at all costs following this experience.

I bought this Cabrio Washing Machine just over a year ago and it never drained water when I was doing towels and bed sheets. Life got in the way, and I managed to run smaller loads in the regular settings. Now, the machine is just over a year old and it will not spin unless I put it on the rinse and spin issue. It takes well over 2 hours to wash a load of laundry. From looking at other reviews, this is a big problem. I would not recommend this washer to anyone. It cost a ton of money and was the worst washing machine I have ever used.

Since there is only two people in this home, we decided to go for the smaller front-loading machine. This was purchased in 2012, still running. It does a clean wash, however common sense does remind people to not over-load a front load washer. If one follows directions, it gets the job done, and ones machine lasts longer without problems. Thanks.

I purchased this Deep Cabrio Washer and Dryer a year ago. We moved into our new house and put in the new washer and dryer. During the first load in the washer, the spin cycle blew the ring right off of the hose and flooded our new laundry room and bedroom in the basement. My husband had to put a clamp on it to secure it. The washer does not wash the clothes, in fact you have to always wash it under Deep Water and wash it twice using twice as much detergent as you normally would. This washer is horrendous. My best friend bought the same one at the same time and she hates it just as much as I do as it does not clean clothes. Whoever designed this washer should be fired from Whirlpool. Im hoping through Nebraska Furniture Mart and Whirlpool I can find a solution.

Whirlpool washer Model WGD4815EW1. Bought this washer just about 4 months ago and right away I hated it but was told by people that all the machines had gone to the lid lock and that the government had mandated the energy saving devices on the machines so the machine will only put just a little water in the machine. I have been VERY VERY unhappy with this machine. My husband figured out a way to bypass the lid lock mechanism. Then after washing clothes many times I found out in order to get my clothes clean I had to just set the dial to Bulky every time OR I had to wash the clothes 2 times to get clean if I didnt. Once we bypassed the lid lock and then I figured out where to put the knob so the clothes would come clean I was fine until last week the machine just would NOT wash or do anything... it filled with water and just sat there until my husband got the water out. I located a Speed Queen from an appliance store and I am much happier. It does not have the CRAZY lid lock on it. I realize that some children are apt to mess with the washers. But I dont have children anymore and when I did I had a laundry room with a lock up high on the door so they could not play in the laundry room. I dont understand why this so called mandate could not have been done in a way as to allow those with kids to have the option on the machine with a built in code device to set the machine so the lid will lock and those of us without children in the house to opt out of the code to set the lid lock. NO REASON why we cant have a CHOICE. As far as I see it is a way for the government to try control more where they need to keep out. The cars have been designed with safety locks for children to keep them safe, but it is up to you to choose to use them. Same principle! Now for the mechanism to make it so the machine will only put so much water in the machine to wash. Youre NOT SAVING any ENERGY or WATER if you have to wash the loads twice!! This whole mandated business with the newer washer machines is a huge JOKE on everyone. I will be searching out used machines and having them rebuilt because I dont EVER plan on buying another one of these newer machines. If enough people stop buying them the manufacturing companies can raise some cane with the government to get the mandate lifted. NO I will not buy another Whirlpool washer. I encourage some of you out there who LOVE a challenge to figure a way to change the stupid motherboards on the newer machines and create a great business for yourself because if someone else can create it you can recreate it.

Whirlpool Duet washing machine model WFW9500TW03 - Just after the first year of owning this machine, the metal hinge to the door cracked and the door didnt shut properly. It was replaced. After a couple of years, the bearings and drum of this machine failed. The cost for parts and repair were as much as the machine new. After repairs, the machine never ran quietly again. I have called for repair a second time for the same issue and he has confirmed that its the bearings again causing the drum to dislocate and hence, break the belt that I now need to replace. My problem is with Whirlpool for its defective metal in its machines (many complaints on the internet will confirm this). I believe there are enough consumers out there to file a class action lawsuit.

Over-the-range microwave hood combo - It is not that it does not work, it just wont shut off! Close the door, it turns on. Touch the side, it turns on. I have walked in the kitchen and found it on! I am afraid it will turn on when I am not home and burn down my house! After reading the poor customer service received by others, I will just replace it.

Very unhappy with my top load washing machine. I use more water. Can wash fewer clothes and clothes do not come as clean as with my older Whirlpool. This machine needs a SERIOUS AGITATOR. Will not buy another Whirlpool.

We bought all new appliances, and within a year, the range and microwave are not working correctly and the refrigerator has rust on the doors. We called about the rust on the doors and were told that it is not stainless steel as advertised and rust is not covered. Fortunately, we purchased an extended warranty, which will cover the repairs to the oven and microwave. Well see how it goes. Stainless steel appliances really arent stainless steel, so they are misrepresenting their products to many people.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

WHIRLPOOL WTW5000DWO WASHING MACHINE TOP LOADING 2014 MODEL - I purchased this above model at Lowes of Hagerstown MD. The first problem I had with the washing machine was the spin cycle did not wring out the clothes. The second problem was the spin cycle caused the washer to start walking. The washer was leveled prior to washing the clothes also water was still running into the washer after it cycled off. I call Lowes the next day and told them my problems and they replaced the unit with the same model. The delivery came and I hooked up the washer and placed a few items in the washer and allowed it to cycle through. The washer did the same thing all over again. It did not spin the clothes out and the water continued to pour in the washer. And spun out of balance. I contacted Lowes and advised them I was having the same problem. I also told them my cousin had the same model and they were also having the same problem. Lowes offered to replace the unit with a different model so I selected Samsung washing machine and I have it scheduled for delivery tomorrow. Also I wanted to let you know that the price difference was 100 Dollars more for the Samsung and Lowes told me that I would have to pay the difference. I told them I have been inconvenienced twice and I will not pay the difference, they then call in the store manager and he override the difference. Lowes of Hagerstown will try their best to make it right, its sad that the mfg will not bring a product to the market that will do what it is advertised. The federal and state government should fine these companies and replace the defective models when reported. Do it right the first time and you wont have a repeat of the same problems. Also not use the consumer as a guinea pig to try out new products.

Ive always had good luck with Whirlpool. They last longer & dont have as many repairs. Ive had to have a lot of repairs with Maytag washers. The dryers didnt give any trouble. I recommend Whirlpool.

This washer was purchased on 12/21/2007. It was in a vacation home that was rarely occupied, therefore washer not used much. On 7/23/2008 the cycle switch was replaced. On 7/20/09 the same problem occurred. The washer may have been used 5 times during the year. The handle and rim also needed to be replaced. On 8/31/09 the switch and handle were replaced again. On 2/5/13 the door latch was BROKEN AGAIN. Now on 7/10/15 the door latch, start switch and cycle switch are broken again... DO not buy WHIRLPOOL products.

First of all, I want to thank all of you who took the time to write all your comments. You have helped educate me in many ways. For one thing, I had no idea that Whirlpool made such bad appliances, or at least water heaters. I pretty much grew up in a Whirlpool household. But that was a long time ago. Things change. Anyway, I too bought a Whirlpool from Lowes about four years ago. It was the top of the line 50 gallon energy saver, and it has had problems staying lit for the whole time I have owned it. Because I read your comments before contacting Whirlpool (this time), I knew exactly what to expect. And that is what I got at first--someone trying to sell me parts via shipping costs. I said no to that, and a rep called and offered to replace the unit, which is exactly what Whirlpool should have done for all of you. I am writing this out of courtesy for Whirlpool. They did the right thing for me, and I truly do appreciate that. On the other hand, Lowes wants $700 to deliver and install the new unit. I live seven miles from the store. They set my other water, the Whirlpool I purchased from them, up in my garage. It is extremely easy to get to, and it is all up to code. In other words, even though they sold me a defective product and profited from both the sale and the delivery, they now want to do it all over again by charging so much for the set up. They did not even offer to prorate the new install. Of course, I will hire and pay a certified plumber to do the job, but I am very sorry to lose Lowes. I have always enjoyed shopping there. Home Depot is just across the street, and even though I have learned not to purchase a water heater, or any major appliance there either, I will go there from now on. Losing my business might not worry Lowes a whole lot, but two years ago I bought $5,000 worth of fencing from them, and God knows how much over the years. If you and I and all the thousands of other unhappy customers would stop going there, they might feel a bit sorry for doing us all so dirty. Agreed? Thanks again, you guys.

Soon as warranty expired issues with product. This should not happen. Made in America, washer making too much noise. Products cost more but poor quality. What is this company going to produce? This is the world we live in.

I purchased this LOVELY top loader on May 19, 2012 - the lid is broken and wont stay up. I am 4 ft. 11 inches and I need a stool to reach the clothing at the bottom. Kind of hard to hold up the lid and scoop clothes with the other hand!!! Today, I discovered it is rusting from the inside out!!! From what??? Pulled it forward to clean the floor underneath and discovered it has rusted and corroded even on to the matching dryer - white finish!??! Guilty by association! AAAHHH!!! I wish I could upload the picture! Whirlpool and LEONs warranty - they have some explaining to do.

I bought a new Whirlpool fridge that has been a piece of junk since the day I bought it. The minute the warranty expired. The thing broke down. The corporate service center was a joke. 15 min wait time just to get through. Then a runaround of misinformed referral numbers. Minimum charge $200/30 min just to have a service rep even look at it. And then $100/hour + parts after that. Highway robbery. My doctor doesn’t even charge me that much. I will never buy a piece of junk WP product ever again. Their customer service is rude and non-existent. The company does not stand behind its products. Don’t buy!

The self cleaning work very well. All you need is clean the filter every time you use the dryer. I had the large capacity. I can wash my blankets and heavy clothes like commercial machine and the machine is programmable for your wash load.

I love my stove and all of its features. My stove is easy to clean and I Love the self cleaning oven. I have a flat top so that helps when it comes to cleaning, not to mention it makes cooking a breeze. I love all the push buttons and how smart my stove is. I highly recommend my Whirlpool to anyone looking for a great appliance.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

I had purchased a washing machine trough CSD canteen and go for AMC for five years on September 25, 2006. In September 2010, I lodged a complaint and the Engineer visited and asked for a replacement of the bottom cover. I said okay, but later on he told me that I have to replace the complete outer cover. I agreed and asked them to replace it. The cost is fixed for 2,500Rs. They replaced the cover but did not replace the bottom cover.I talked to the agency and they agreed to hold to 1,000Rs for the bottom cover and I paid to them 1,500Rs. Later they brought an old cover and I refused to replace that. They told that the bottom cover is not available. Then they never tried to replace the bottom cover. I arranged for the same from the local marketing for 600Rs and replaced it. I paid the service charge for the engineer.Later, I lodged a complaint that the machine was not drying the cloth. The engineer visited and told me that the belt will be replaced on payment. I agreed and he told me that I will visit the next day and replaced the belt. But he did not come until it was late.On September 18, 2011, with number DL0911018283, my machine was not switching on and I lodged a complaint to customer care. But no engineer visited me. Then I regularly complained but there was no response from the agency. On September 23, I talked to customer care, Mr. **, that I am going out of station and I lodged a complaint from the last five days that no engineer visited me. My AMC is expiring on September 25, 2011. I will come back on October and then send the engineer. On October 9, I reminded them that they refresh my complaint with number DL1011007031. The engineer visited and told me that the PCB of the machine is faulty and I have to pay 3,500Rs.I told him that I complained for this problem during the AMC period, hence they are supposed to repair my machine free of cost but he refused. I talked to customer care and tried to resolve the issue but I was not successful. Then I talked to Mr. **, the head of Customer care in Delhi, on October 12. He promised to resolve the issue but no engineer visited me and my machine is still defective. On October 13, I tried to contact Mr. ** several times but he or his PA is not picking up the phone. Now, how will I get to repair my machine?

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

Just like a lot of other people, I bought a Whirlpool hot water tank because of the good name. And just like the other people, my tanks pilot light will not stay on, it will be on for a few days and then you get up and no hot water.

IPod the Gold Series from Whirlpool appliances including the French door with the freezer on the bottom the induction still two ovens and glass top the microwave in the dishwasher does it cost me about $8,900 dubstep problem with it is after two-and-a-half years of using it the freezer stopped working and coming to find out that not only mine but three other ones in my account have the same problem. The sealed system for the freezer had a leak in it. I lost the freezer traffic to Whirlpool. First time around they said, No problem well take care of the part. To take care of Labor. I waited a month. Nothing happened. I called them back. They said I needed to do something else so I waited for it to happen. Nothing happened. Now I call back 8 weeks later without a refrigerator my house come to find out they told me theyre not doing nothing.Well four weeks later now Im sitting with the stove which cost me quite a bit of money like $2,000 for the induction stove. Now its burned out the computer components. Control panels are both out. It will cost $800 to repair it. Now well pull. Said they will also pay for parts for that but not for the labor so now Im stuck without a refrigerator and I dont have a stove in my house and theyre saying its okay that these very expensive piece of equipment that I bought and its okay for them to only last 2 years. Never had a Whirlpool last me less than 10. I think theres something wrong with this picture.

Whirlpool has always been known for quality products. But the range I haves burners are failing. It is eight years old. Think it should last longer than that. The oven works good, but the temperature varies as well. Lower oven door is designed bad, because grease gets trapped between the two glass doors and cant be cleaned.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

I own an FG flame lock water heater and have been having the same problems with the pilot light not staying lit. This is very frustrating! I have searched many websites and am not able to find a replacement thermocouple for the stupid thing. Also, I have been told that the parts for the type of water heater that I own is no longer available. I tried to call the Whirlpool number a handful of times, but unfortunately, I was on hold the entire time and could not speak with a rep. I guess that explains all of the complaints I have read on here. I would like to be contacted or have help from someone regarding this matter! I would not recommend this product to anyone and I am very dissatisfied!

I am on my second Whirlpool hot water heater within 7 years and both had a 9-year supposed warranty. Upon replacing the pop-off valve (at my expense), I paid $98 to replace the gas valve (part was issued by Whirlpool). Still having problems with pop valve and now the pilot light wont stay lit. Upon calling the number (877 817-6750) I was finally told they would replace the heater. When I stated that I did not want another faulty Whirlpool heater and that I would take the faulty heater back to place of purchase but that I wanted a local plumber to install their own heater, I was told that I had to have a thermal expansion tank or they basically would not do anything. Why would I want a third Whirlpool product? The second one is ruining my tiled basement floor as it is. So after spending over $600 for the faulty heater, now I have to spend $700 to replace it.

This diswasher is streamlined and elegantly desiged for any kitchen. It stays externally clean with easy to wipe surfaces. Easy to use controls on the top of the door that cannot be accidentally hit when walking by the item. Plenty of internal space for lots of dishes. Internal silverware rack is easily removalble and not in the way of dishes. It is extremely quiet when running, like a soft hum in the air. A real "bang for your buck".

Originally installed early 2007, the very expensive unit went crazy after about 14 months, with random beeping noises, and non-response to keyboard entry. Sometimes unplugging the unit worked. When unplugging no longer worked, the unit was repaired by replacing the keyboard logic boards only to fail again the same way.about a year later. It appeared the heat or steam from the cooktop below the microwave was causing the failures, so we became careful to ensure the fan was on. Last week, after boiling some water, the unit failed again, with error code F2H2, the keyboard error. Didnt Whirlpool expect the microwave to survive heat or steam from the stove/cooktop below? Overall, the unit is great when it works. Unfortunately due to the large size of the 2 cu ft unit, only an identical unit will fit. Im skeptical of replacing my broken unit with another Whirlpool Velos unless this keyboard problem has been fixed in new units. Anybody know if Whirlpool has fixed this problem?

Within 5 months my 850$ dishwasher broke. 2 months to repair and 15 plus hours on the phone. Warranty is cryptic. You must allow them 30 business days from when they order parts. Buy Bosch, wish I did!

Whirlpool Gold GC3SHAXVBOO - Two issues in two years. We purchased this refrigerator online through Whirlpool in April 2010. Almost a year later, a circuit board went. This was repaired under warranty. Our refrigerator was making loud cycling noises and we were told this was normal. Now a year later, again we have an issue. This time its the compressor. We called customer service and were told there is nothing they can do. The cost to fix approximately is $700. This is very upsetting to buy a $2000 refrigerator and have two major issues within two years and then not have the company stand by their product. I would wonder how many other people have this model and have these issues as it seems like a lot. Whirlpool customer service is terrible, non-caring and offered no assistance.

Worst Air conditioner brand I have ever come across. My personal experience with Whirlpool Air Conditioner is not encouraging. I have used almost all brands of AC but found that the quality of Whirlpool AC is not worth recommending. Please stay away from Whirlpool. I got one Whirlpool 1.5 Ton Split Air Conditioner (Model 3D Cool Xtreme, 6th Sense Climate Control) at my house about 2 years back. I booked a service request with the Whirlpool’s Authorized Service Centre M/s Western Refrigeration Co., NOIDA as the Air-conditioner was not cooling to the desired level. On the first visit on 20-05-2019, the service engineer advised that the AC was not cooling because the gas had drained and the gas is required to be filled for which there will be a charges of Rs 2500/-. Believing him, I agreed for refilling of the gas at his quoted price. He sent next day some other attendant team for filling the gas. Those attendants revealed that in addition to the gas, two valves are also required to be replaced at an additional cost of Rs 1600/-. Though I had a doubt about the correctness of their diagnosis, there being no option, we paid for valves also. Accordingly, a total of Rs 4100/- was paid by us.However, to our utter surprise, the AC stopped cooling within a couple of days. Hence, the service centre was again informed. The complaint was again attended second time on 04-06-2019 and we were told that they have again refilled the Gas.However, again the result was NIL. The AC was not giving cooling effect. Hence, third time again complain was booked. The first attendant once again advised for only gas filling after thorough examination. He sent an another guy on 20-06-2019 for gas filling who then revealed that the cooling effect is not there because the condenser coil is leaking and the same will have to be replaced at an additional cost of Rs 5500/-.The following important points emerges out of the above:- 1) If there was a condenser coil leaking problem, why it was not disclosed to us when the AC was attended earlier by various Service Teams consisting of various attendants in the process from the same service centre? 2) Whether my all money paid earlier for gas filling and changing of two new valves will go waste due to wrong diagnosis by your technicians?3) Keeping in view the earlier wrong diagnosis, I very much doubt the present diagnosis and feel that this is a ploy to extract more money from gullible customer who lacks technical knowledge.We spoke to the service centre officials up to three four levels on the numbers received from the call centre but after listening the matter they assure to call us back. After no call back from their side, when we try to call them, they do not lift our calls. The above facts clearly bring out the cheating, harassment and looting by the Service Centre under the aegis of the so called prestigious company M/s Whirlpool. The hard earned reputation and trust of the Whirlpool is being impaired by these unscrupulous service centre.No punitive action appears to have been taken by Whirlpool office against the unscrupulous service centre for unfair trade practices. Rather the person from Whirlpool office over call was also trying to coax us to pay some more money to the unscrupulous service centre who has already cheated us and extracted money earlier from us with zero results. My Air Conditioner is totally shut off due to mishandling and misdiagnosis by the service centre. We are acutely suffering due to scorching heat and over and above going through the mental harassment for the last two months.We expected an immediate resolution for the above problem on top priority basis without any further additional cost however despite my number of reminder through their toll free number, mail id etc. the problem still remains unresolved and unattended. It is highly disappointing that despite my writing repeated mails with reminders no senior person from Whirlpool has so far taken cognizance of the grievance and the customer has been left in the lurch to be harassed by the highly inefficient, incompetent and indecisive service centre officials who have miserably failed to address the issue and satisfy the customer.

Whirlpool model EVLl201NXRQOO, serial no. EWT2423236 - Defective paint on the back of the freezer that caused rust to form and paint to peel off. Whirlpool does not warrant manufacturing defects on the paint. Guess I was lucky for it to be on the back and not the front.

This stove is a joke. The range gets too hot even when you have the setting on low. The oven now has started becoming hot when its not turned on. Goes up to 245 and its scary. I have to turn off the breaker to ensure it gets cold again, but Ive had to do that every day for a week now. I will be calling Whirlpool to file a complaint. I have small children and Im scared my house will catch fire or have a unnecessary increase in my electric bill.

As you have heard from 700 other people we bought a whirlpool refrigerator because GE sucks, brand new refrigerator died in 4 years with 4 service bill costing more than the refrigerator. So we did some research and whirlpool was being recommended by several stores and the reviews were better than most. Well we bought the Whirlpool refrigerator and it has been nothing but problems from the start. Everything that can go wrong has and of course our warranty ran out. And we are sitting here with no water, no ice, water tray falls out and breaks. Called whirlpool many times and their answer every time is, we will send someone out for you, and then we get a 300 to 400 dollar bill. Whirlpool sucks as bad as GE. Its crazy these companies get away with this crap. They can build good refrigerators they have in the past. My grandparents have one for 25+ years, now you cant get 2 years out of them. Pure Junk! I dont know what a good brand is anymore, they all seem to suck. Good luck.

I’ve always bought Whirlpool appliances. They last a very long time. My washer is an old Whirlpool Ultimate Care II I’ve had for several years. My dryer is Whirlpool MOD WED4800BQ. Both working great for many years. I just bought a Whirlpool Fridge MOD WRS588FIHB00. All are worth the money for long lasting appliances.

We have the same complaints about the washer as other reviewers -- have to use deep water wash to get enough water in the tub to clean and rinse soap from clothes and we have to keep the loads small. Dryer thermostat had to be replaced right off the bat. Now on medium heat it just burned patterns into two light-weight polyester fleece items -- the clothes came out with the heat input screen pattern burned into them. Now I wonder if they stuck to the heating screen for any length of time, was it a fire hazard? The burned parts of the items are now stuck to the drum so that needs cleaning. So well be using low heat on most everything and drying them twice, since low heat leaves them pretty wet after 35 minutes. So much for buying energy saving appliances which, by the way, we were proud to buy! But, prior to buying these appliances, we had washer and dryers that last 20 years. Built in obsolescence with these new things? I have no faith in the consumer complaint process anymore. The retailer may care as they are a bit closer to the problem, but the manufacturer? Forget it. Vote with your wallet and dont buy these products.

In March 04 2014, I purchased a Whirlpool washing machine. After having had a Whirlpool for 17 years without any problems with it, I purchased another one. This last one is a piece of junk. I dont even want to talk about the noise, I think it is expiring or on its last leg. They should fire the engineers that invented this model and bring back the other engineers that invented the one I had for such a long time, they far surpassed these space scientists that they now have. On August 8, I called Whirlpool, they sent me someone from Dinos appliances. This man tells me that there is nothing wrong with this machine and that he re-calibrated it. Whatever that means, it is still not wringing the clothes properly. There are only 2 people in my household, so my loads are not very large. I even tried this Drain & Spin cycle after the wash was completed and the clothes still came out too wet. I also have a Whirlpool Dryer and I will not replace it with the same brand. I also will never buy a Whirlpool product again and will make sure that I will share my experience with everyone I know.

I just bought my washer 3 or 4 months ago. It is the worst washer I have ever owned. Anyone that has ever done laundry knows you need water to wash clothes. My clothes are not clean and my whites are very dingy. I use the same soap (Tide) and the same bleach (Clorox) that I have used for years. If I can find someone dumb enough to buy it I will sell it and get a good one. I would rather go back to the old wringer washers than this one.

I replaced our old 50-gal water heater (10 years old) with a new top-of-the-line Whirlpool 50-gal water heater in Feb 2011. The Friday before Memorial Day, the heater went out and the pilot refused to stay lit. I called and jumped through all their hoops and finally figured out that it was the gas valve, because the pilot goes out as soon as you release the button and the milli-voltage reading is ok. They sent me a replacement and it cost $145 to have a plumber come out and install it. We were without hot water for 5 days. Now 9 days later, the pilot keeps going out. This time I can re-light it, but after the water heats up, it is apparently going out again. They refuse to replace a 12-year warrantied water heater that is only 2 years old and I am going to have to hire a plumber again to come out and attest to what we already know. This water heater is extremely loud. When we had it installed, I read the reviews and there were similar complaints (sounds like a mini jet engine). We dont seem to get as much hot water as we did with our old builders grade heater. This is a bad buy and I would advise anyone looking to purchase to look elsewhere.

Im disgusted by both Sears and Whirlpool that I have paid top dollar for my Whirlpool Duet Washer model #WFW9400SW01 (along with the matching Whirlpool duet dryer and 15 floor pedestals) at a cost of over $1,000 for the machine, and hundreds of dollars for the Sears master protection service contract. And 5 weeks after first reporting my washer breakdown and lugging my familys laundry to a ‘local’ laundromat located miles away, I still have no imminent hope of seeing a repair. This is the second time the machine has broken down within 5 years. (Dont even ask me about my nightmare with LG dishwashers!) This time the wire harness is the culprit, a part which apparently has been redesigned & which has been on back order indefinitely - all Sears can tell me is it might be available sometime in October. Is it coming from overseas, I ask. No, Delaware, Ive been told. And it could be as long as into November. While they did tell me I could begin to pursue a replacement machine by the 21st day of non-use, I am so weary of the life energy this appliance nightmare is sapping from me simply to resolve this. And Sears and Whirlpool dont seem at all concerned with the massive amounts of junked appliances winding up in our collective landfill as we all tolerate this built-in obsolescence. Besides the obvious wear & tear issue on my wood floors in replacing the machine (the dryer positioned next to it on a pedestal in my cramped powder room/laundry room will also need to be reinstalled in order to get both to fit properly), what about the consummate waste of having these machines reach the end of their life expectancy after a mere 5 years? I wish Id never upgraded our appliances. In the 7 years since we did, our LG dishwasher has failed innumerable times and been replaced multiple times, until we finally replaced multiple versions with a Bosch (so far, so good); our Kenmore Elite range has also failed and needed repair; my washer has died twice. Shouldnt we expect better when we pay top dollar? And if not Consumer Reports, then why isnt the Attorney Generals Office investigating this clear fleecing of the consumer, Sears policy in which sales people aggressively hound consumers like me into purchasing expensive service contracts, making all sorts of unreliable claims and limited time only price quotes. And then when the consumer actually needs a repair, is treated like Im last in a long line of unhappy customers. Maybe if current embattled Sears CEO Edward Lampert had to face weeks of doing his own familys laundry in a laundromat while he waited for a part on backorder from Sears, he might recognize not only a lot of other people waiting on a Sears part there too. But that while on his watch, the Sears name has eroded big-time as he sacrificed quality in his relentless drive for profits.

I bought YMFE330W0AW0 Whirlpool on sale less than a year ago and I have been angry since almost the beginning. This is a cheaply made product which angers me because Whirlpool is supposed to be a quality product. The clock cannot be set because we have to press really hard and that part of the stove head is broken now. I knew this would happen after only a few weeks but was wishing it would not. There is a lot of heat that leaks out of the oven continuously when trying to bake something. The top is horrible. This stove top does not keep an equal heating element so if you put it on low, it actually turns off for a few minutes and becomes red again for a moment or so. It is impossible to cook anything evenly. I HATE and DETEST this stove. The worst product I have ever known. If it is on sale...BEWARE.

I should have read reviews prior to purchasing the Washer and Dryer. The washer sucks big time. Does not clean clothes. Leaves soap in clothes. The repair man said use 2 tbsps. of soap. Still soap in clothes. I use 1 tablespoon of HE soap. 2 1/2 hours for 1 load because I have to use deep water and extra rinse on first wash. Then I wash again with no soap. I HATE this washer. Whites are now yellow after washing. Cannot do lightweight comforters. I am at the laundry mat more than using my new washing machine. Dryer is ok but does not remove any lint from clothes or towels. I always trusted Whirlpool. Not anymore.

I have had my washing Machines since 2011 and have had continuous problems with the washing machine during spin cycle sounding like a freight train going through my house. Whirlpool has had people to my house 5 times to fix. When warranty was up in 2012, I was told they would continue to cover this particular issue. They came out again in April 2013 and now I am being told, Too bad; if you want fixed then you will need to pay for it.

We purchased our refrigerator about five years ago and we have dealt with it freezing up constantly. The coals and vent are at the bottom of the refrigerator. I believe that is a lot of the problem. We have continuously blowed off the coals to keep it from freezing up but sometimes its still freezes up. I do not recommend the two-sided door Whirlpool refrigerator.

Just plain terrible. Purchased Whirlpool Gold Seris Dishwasher Model w10698637a in June and now its been 3 attempts so far to fix a brand new dishwasher that does not clean. So far I have been asked... have you been heating the water before you start the cycle?, my favorite... Is this a whirlpool dishwasher. So I find out today that it will take another visit from a company that hasnt been able to fix it, plus a call to the tech line to make sure they havent missed anything. Heres what Ive missed, a dishwasher that cleans.

When my wife and I were planning our retirement, we made a to-do list before we officially stopped working. We are loyal Whirlpool users and over the next 3 years we purchased 4 major Whirlpool appliances in preparation of having 8-12 years of problem-free time as we go from a two-income working family to two people on fixed incomes. I retired in December of 2011 and unfortunately this did not pan out on 2 of the 4 appliances. The washing machine, in late February 2012, blew a transmission 23 months after purchase and 11 months after the warranty expired. Discussions with Whirlpool by phone were unsuccessful in getting the repair covered.Ultimately, this repair cost us $265.00. In late April, 9 months after the warranty expired, the refrigerator iced up and had to be manually defrosted, despite being equipped with ADS. My family and I did the defrosting because it was a weekend and tech support was not available. On Monday, the refrigerator was functioning, so I was told to run it and see what happens and call the tech if it happens again. I had done research online and found many folks were having trouble with this refrigerator model and the main problem was the control board”, a board that is used in many Whirlpool refrigerators. I ordered one after the initial problem and waited for it to ice up again. On Sunday, May 20, it repeated the same symptoms displayed and I put the board in myself and it solved the problem. This computer board cost me $95.81.I contacted Whirlpool about the two premature, post-warranty expiration issues in hopes of getting some reimbursement for the repairs. The Whirlpool rep told me that because there had not been a recall on either appliance, they could not reimburse me. They instead offered me a 6-month extension on the dishwasher I bought last July. I have been on several complaint websites and have seen the refrigerator control board repeatedly mentioned - all within the approximate 2-year timeline as my control board failed. My refrigerator was a GB9FHDXWQ01 model, but the control board is used in many of their refrigerators. If this has happened to you, please contact me at ** and, hopefully, together we can get enough data to get a recall and get proper treatment from Whirlpool. Please include your refrigerator’s model number so I can verify the board is the one in question. Thanks.

I bought new and both have broken over and over. The oven takes forever to heat up. The fridges ice maker broke and then the defroster in the fridge side broke. Dont buy Whirlpool.

French Door Model WRF989SDAWOO: Horrible quality, worse support! We have a new French Door (not inexpensive). Within 3 months of owning it, we phoned in because the unit was periodically making a very loud, metallic humming sound. We were politely told that noise was normal, and that if the unit was working when the service man came out, we would be charged. A few months later, the noise was constant, and we noticed that the temperature was not stable. Freezer was set to 0, Fridge to 36, yet the thermometer was reading 20 (freezer) and 38 (fridge). We called in, concerned that it was failing. We were put on a schedule for 9 days later. We were told we would get a call the day before with a 2-hour window when the tech would come. That didnt happen. We got a call that the tech would come between 8:00 am and 5:00 pm (he showed up at 5:35 pm).We phoned in 3 days later to tell them that we were losing food (freezer was now showing 29, fridge 40). We were told (by both Westinghouse and by A&E Factory Service, which is Sears) that we should rent another refrigerator. When the service tech showed up, the first point of contention was that we had Whirlpools warranty (and had paid for the extended warranty) rather than Sears Master Protection agreement. Nevertheless, the tech finds that there is a problem with the evaporator coil, which had to be ordered from the factory. The tech was nice, and told us not to wait to be rescheduled, but to call him directly, and he would come the business workday after we notified him that the part arrived. Another week without a refrigerator / freezer, and now we have to worry about what the tech told us; these units are NOT of good quality, and have had repeated failures in the cooling systems.

Oh my goodness, are these people right with the Whirlpool Ranges. I moved and put in the appliance # to get what I had from Whirlpool. What a piece of crap I got in a range and refrigerator. Never had appliances that looked so pathetic. You cant clean the outsides or the insides. Outsides nothing but streaks never look shiny, I really do doubt they are even close to Stainless steel. My old ones I might add were less than 5 years old when we sold our house and all you had to do was spray with Windex and shine shine shine. Try that on the new ones streak streak streak, and nothing ticks me off more than looking in a kitchen and looks like pigs are running all over your stuff. Then the range aqua lift self clean. You have gotta be kidding. No self clean about it. Scrub Scrub Scrub by hand. You mean who in the hell came up with this. Make something with fat and instant burned mess. Really oil and water or grease and water where I come from they never mixed, and all they do is get gummy. Now if you dont care how your oven or outsides look then I guess it doesnt matter BUT I DO, I am with the guy that said he just wants to throw it out. I would have been better off buying a clean your own. At least you could use oven cleaner. I dont know where these companies are coming from ripping people off this bad, now that I am older I am stuck with it and can hardly clean it to get down in there. You make supper and you have to spend 2 hours extra in the kitchen scrubbing the damn thing. Of course you give a company loyalty and get screwed this bad. All my self cleaning ovens I had when we sold houses the people thought you never cooked in them. This is not even a year and a half old and looks like it is 10 years old. Even scrubbing it is a joke. You cant get it all anyway. Im sure I will not live with this long. I use to love to cook even did it for a living and man using this thing I hate cooking more than ever.

I have had my Kitchenaid dishwasher since April 2010. I have the receipt as proof. I have recently had a professional out to replace a seal in the door, the gasket on the vent and the unit still leaks. The only places left are the metal body and door. I called to say I wanted the warranty honored. I was told one of their servicers had to verify. I agreed. Their servicer came out at the agreed time. He did not bother to protect my hardwood floors from his muddy shoes. He also absolutely wreaked of cigarette smoke. He proceeded to try and push me into paying for the same repairs I had done last week because he would not warranty the parts under warranty unless I paid him to replace parts a week old. I told him he was here to verify the leak not push me into more repair costs. At this point, he began slamming his tool box together and exclaimed Thanks for wasting my time. I called the Kitchenaid warranty number in my pamphlet to see about the warranty. They refused without making me pay for their esteemed professional to do the same work, a real professional already did. The best I was given was 30% off a new appliance. When they wont honor their 20 yr warranty on the one I have, telling me their unprofessional is so much better than the one I used who did protect my floors and treated me with respect, I have no faith left in this company or its servicers. I will be filing a complaint with the BBB. I plan to be very vocal with this companys refusal to stand behind their products and explicit support of disrespectful servicemen.

WRF989SDAW02 - Oct 2013 1st refrig delivered. After 4 repairs within 6 months, Whirlpool put in a request to the Exchange Review Board to replace. New refrigerator (same model though) was delivered May 19, 2014. 4 repairs later for the exact same thing with the 1st refrigerator, it was again sent to Exchange Review Board to replace. New delivery was set for July 30, 2014. When delivery company arrived at my house with new refrig, I was told it was smashed on both sides. They would take care of contacting Whirlpool and schedule a new delivery date. From July 30, 2014 to present I still have no refrigerator from Whirlpool. I have 15 documented phone calls to Whirlpool or JB Hunt (delivery company).

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

The Worst experience with Gold Series Mod WRF 757SDEM01. Purchased from Best Buy June 2016. $2215.00. Within 6 months The interior light began going dark within 6 months. Our very reputable warranty repair service ordered a part that did not repair it. Was only temporary. They did figure out that the circuit board was bad and promptly took care of our problem. Next I kept noticing water appearing on our wood flooring. Let it go because it only appeared sporadically. Called Whirlpool only to find out they switched to a warranty repair service that was inept and inexperienced. Said he could fix it. Blamed it on a freeze-over so I let floor dry up then re-started and refilled. Thought he did fix it cause it made sense. When reassembling he broke to upper freezer try glide. Then 3-4 weeks later I notice one morning water again on my wood floor. The dripping had been running beneath the wood slats and had seeped up through the joints. Now the flooring wood has swollen and will need to be replaced because of this. This is the second time I had to unload all food and store at neighbors and give away. Extremely poor engineering designs as each time the ice dispenser is used, nothing prevents ice from flying out onto the floor ever since day one. Same with water. The release does not shut down to prevent water or ice from pouring out onto the floor when removing any size cup. The refridge doors must both be opened to use the lower level drawer. Loses much cooling with having to always open both. Next, weve come home MANY times with the left refridge door partially open because of the difficulty of the mechanism to secure at closing. This happens to us 5 times a week for three years-honestly!. This was the only refridge we could find that would fit our opening in a 20-yr-old home. The fridge is so heavy one man cant pull it out of its opening. Only 2 very small wheels in front and skids in rear stick due to weight. Weve confirmed this is not a spigot leak from the ice maker. Finally (but probably not) the ice container allow much air in because of having to open the left door that your ice is always melted together plus it too small for a family of two and ice must be purchased when entertaining. And to top it off, the human that took the warranty call this time is foreign and my wife could not get them to get our last name spelled correctly nor the phone number correct after constantly repeating it. This unit and model is an absolute lemon. Im going out today to find another unnecessary $2500.00 to buy another.

2 years of use the wash plate went. $150 later, one year later wash plate went again (the wash plate is all plastic, the motor spline in metal total stripes the plastic teeth in the wash plate) I replace myself. 3 weeks later the shift actuator failed which cost another $60 which I replaced. Now the bearing is going. There are only 3 people living in the house. I would stay away from the top loader washers from Whirlpool h2 low series. Huge disappointment.

I bought my Cabrio washer about 3.5 years ago. Little after the year, I had to replace the lid because the hinge broke. Then came the F1 code, which I noticed if you turn the machine off for a couple of minutes, it resets itself. About a week ago, it started making a grinding noise and staining the clothes with oil or grease. Transmission problems. I was told by the seller it had a 10 year warranty. I called them up and now I got to foot the bill for a technician to come to my house and tell me what I already know plus labor. Might as well buy a new one. Beware because I believe Kenmore is manufactured by the same company.

Whirlpool Cabrio washer w103386894 - I have had nothing but problems with this piece of crap washing machine. Either the clothes come out soaked at the end of the spin cycle, or it gets stuck in a cycle and repeats. It makes so much noise you can hear it through the whole house. It is less than three years old and now it is leaking water. I had a base model Sears Kenmore that I had for over 12 years and it died from old age. This Whirlpool is pure crap, do not buy.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

I was gifted a washer and ventless dryer for my condo. It takes a little longer than a regular dryer but it works great. It fits perfectly in a closet.

On 9/28/16 I purchased 4 new Whirlpool appliances from Orvilles Appliances in Buffalo NY. They were delivered on 11/9/16, the refrigerator was installed. The microwave, dishwasher, and range were not installed until Jan. as my kitchen was being remodeled. Both doors were dented; it took 3 months for Whirlpool to send new doors. After installation water began pouring all over, gallons of it; it took a month to get fixed. The microwave door has a large defect and the surface light does not work; it is still not fixed. Six months later it is still it fixed. I feel like I paid a lot of money for defective appliances. Whirlpool is truly a company that does not stand behind their products; they could care less about their customers. I will never ever do business with Whirlpool again. And Orvilles also refused to help; it was a mistake to shop there.

The Whirlpool dishwasher is the best I have ever had! The pot scrubber just cleans anything off the dishes! I hate to wash dishes before I put them in the damn dishwasher!

Purchased the new dishwasher in 2009 through the builder of our home. I quit working completely like there was no power to it. We replaced the fuse to it and then it worked, but kept pausing during the cycle. Sometimes it will completely go off and then when the control panel comes back on, it sits paused until you push the button. We replaced the computer with a new one and it works even worse. It shuts down more often and still requires a restart. So frustrating! Appliances should last longer than a couple of years.

Whirlpool Cabrio Washer and Dryer - I have had all of the problems that all of the other 900 people have complained about! The washer does not wash anything properly. I have even experienced having something such as a bit of cereal stuck to a dishcloth and it was still on there after a full wash cycle. All of my whites are now grey and stained. All of the sheets end up with a huge dirty ring the size of the tub in the middle of them. Everything comes out in a tangled mess of knots! Very frustrating! Everything comes out smelly as if its been sitting in the washer for days. Nothing smells fresh and clean like it should. Energy wise, we are using two and three times the amount of energy as I am washing and drying things for two or three times over, which brings me to the dryer. I put one single load in and it takes two or three cycles to dry it properly. This is unacceptable and I cannot believe that we cannot get some satisfaction from someone in this regard! We bought our set from Sears and I feel that they obviously know of this problem and still continue to sell Whirlpool products! Weve all been taken for a ride and Whirlpool should be held accountable for ripping people off this way. Someone please help!

Its a great machine but the temperature control button is easily moved at times. The machine does a great job in washing clothes. Ive had mine for 10 years now and hope that I never have to replace it.

40-gal gas water heater - I own several rental properties and unfortunately put Whirlpool water heaters in them when the old ones go. It is because they are at Lowes and they are cheap. Today, another call came in from a tenant with no hot water. I called customer service and they determined I received the repair kit from an original design defect from back in the middle 2000s. Now 3 years later, it goes out again. Because I have already received the conversion kit taking thermal couple threading from LH to RH, I needed another part number to repair for a grand total of $160! The same part before the conversion kit was $60. I will never buy another Lowes/Whirlpool water heater for as long as I live. I own a hundred rentals and Whirlpool will never again see another cent for the junk water heaters.