We purchased this one (Wall Mount Model # WMH76719CS) on July 30, 2015. About one month ago I started noticing that a simple large cup of water to make tea or instant coffee takes more than 2 minutes on power 10 to heat up enough. It used to take about 1 1/2 minutes. Now, Im no mathematician, but I believe thats about 25% power loss in 6 months. The same applied to any convection dinner Ive tried to cook lately. Im going to say that Im dissatisfied with the convection feature and would rather just bake the silly food in the regular oven as usual. Any planned-overs trying to re-heat is taking much longer as well as melting butter. I do not have much confidence in Whirlpool microwaves right now, and may never again.

My Whirlpool stove works really well, and it is self cleaning. I have had my present oven/stove combo now for 5 years and had not had one single mishap at all. I am so confident that you will like it I am personally recommending it. It bakes beautifully and if there is a spill or overflow in the oven I just press a button & it cleans itself!

I call in to Customer Service to get someone to fix my washing machine because it wasnt working and when I called, I forgot to have my washing machine serial number at hand. The person on the other side told me that she cant wait for me to get the serial number more than 2 minutes and I ask myself, if they cant wait for me more than 2 minutes to get my serial number, then why should I wait a week to have someone fix my washing machine?

I have been having a problem when washing my jeans in the Whirlpool Cabrio that I have never had before with my old washer. When I wash my jeans, there are always a few pair, never the same ones, that have an odor like dirty dishrags on them. I always hang my jeans to dry so I do not think it is this. I have tried to add a freshener to the wash cycle, it does not work. I have tried to dry them in the dryer with a scented dryer sheet, it does not work. I am assuming after reading these past complaints from other consumers that it is not getting all of the clothes clean because of the lack of water. I always use the deep water cycle, but maybe it is not enough water as previously suggested. I have had an issue with blankets and other heavy items not getting clean and/or not even wet. Thoroughly disgusted with this appliance!! I love all of my Whirlpool kitchen appliances though!

The washing machine has been through 4 boots. The boot material is so flimsy, that they tear constantly causing water to leak out of the machine. There are times it is minimum water, and other times a lot of water.

I purchased a new Whirlpool Cabrio washing machine from DeWaard & Bode at Bellingham, WA in January of 2007. The serial number is **** and the model number is ****. Several months ago, the dreaded F1 code appeared. The code initiates when the washing machine is started and must be cancelled and started 3 times to continue washing. Later, with approximately 19 minutes left in the cycle, the code reappears and requires canceling and restarting another 3 times, at times 4. I have no extended warranty so I have no coverage for repairs. I also dont want to pay for a service call for what is most likely the computer module as evidenced from the majority of complaints online. This washing machine still looks new and works other than the inconvenience of having to stand by when starting the cycle to reset the code and then having to run upstairs later to reset the machine when its partially through the cycle. At some point, it will likely quit operating all together. I have purchased several appliances over the years from DeWaard & Bode and will be replacing all kitchen appliances again next year due to a planned remodeling but at this time, I do not intend to get them locally due to this issue. I have reviewed several comments online and feel that Whirlpool has a real problem with this particular machine that they refuse to be responsible of. I was offered an extended service plan for 1 year at $132.01 or 3 years for $336.61 but Id have to wait to be allowed to utilize it due to existing circumstances. Im not sure if a fix is actually available. The local dealer did not offer any assistance.

I purchased my Whirlpool refrigerator in March of 2011 and the ice dispenser failed in early April of 2012. I called Whirlpool and asked for a repair, but they refused, saying the refrigerator was out of warranty. Being a handy person and upset about the failure after only just over a year, I took the dispenser apart and found that a plastic part had broken and caused the ice door to become unhinged. I called Whirlpool back and explained what had happened, but they refused to help again. They transferred me to the parts department where I was told that the part that was broken was not available and the only thing I could do was replace the entire door! Not only is their product poorly designed, but it is also not easily repaired. I will never buy another Whirlpool appliance.

I purchased a GW399LXUS Whirlpool Gas Range. This is the slide in kind. I paid 1658.00 dollars for this stove, because it was a gas convection oven. We purchased it on 7/21/09. Just yesterday, the keypad numbers stopped working. I cannot even set a temperature for the oven. So now, I can only use the burners. I called Whirlpool today. They told me that my stove does not have any recalls so there is nothing they can do about it. I spoke with Jessica in Michigan. I told her how dissatisfied I was that the stove is only 2 years old and the most important part (the buttons) stopped working and they only cover this for one year. She told me that I have to remember that man made things are made to stop working at some time. I told her they should work for longer than 2 years. I remember way back when my parents bought a stove or fridge and they lasted for 15 to 20 years before breaking or stopping to work.I am a long time Whirlpool customer and always had good luck with their products. But I really feel that they should fix this problem. I could understand if the stove was 8 or 10 years old and something broke after using it, but not after 2 years. I will definitely tell everyone I know to not buy Whirlpool or Maytag since they are one in the same. I probably will not buy Whirlpool again and will have to buy something from Japan since it will last longer. So much for buying American made junk!

3 months after I got the fridge, the ice maker went out. 3 months later it started to work again. Replace the water filters 2 times per yr. It is noisy when it makes ice.

Our countertop Whirlpool microwave oven is just over two years old and one of the led lights in the clock display just went out. The push-button opening mechanism is very hard to work and quite loud when the door is shut. When the timer is set but the start button is not activated for a few minutes, the door warning goes on and you have to reset the timer. There are five beeps that indicate when cooking is done and they continue even when the door is opened. The only way to stop them is to push the stop button and there is no way to adjust the noise level or number of beeps.

We have put hundreds of dollars in service calls and parts on these items. I bought them because they were supposed to be good choices. NO way! I have replaced motherboard in washer, belt and sensor in dryer, the washer has had mold in it since week one. Ive tried to clean it but just keep coming back. All my clothes smell like mold and I already have lung problems! Cant afford to buy new right now. But last month my dryer started making terrible banging noise and so repairman says I need another part! I bought the part more money! Just to have it quit again! Now the barrel split! I dont think I should have to pay the money I did for this set and surely shouldnt of had to replace so many things that went wrong or put up with the sewer smell from the washer!

I purchased the 19 cu. ft. Whirlpool Estar refrigerator WRT 3595FYW on 4/28/12. Freezer began showing frost immediately. Repairman from Marcellas Appliance where purchased - (518) 381-1957, came to check it, put a sealer around the door openings of refrigerator and freezer. Frost continued. I called Whirlpool. They sent another repairman from EB Russell in Schenectady, NY, door needs replacing. Door was ordered and when received by them, the door was replaced on my refrigerator.In August 2012, frost is in freezer, on its roof, on the door daily. I called Whirlpool. I told them I wanted to remove it from my home. Whirlpools reply was, you have a repair warranty, not a replacement warranty. I was not advised of this when I purchased. Otherwise, I would have gone to Sears, Lowes, etc. On 8/16/12, another repairman from The Appliance Man, Albany will be here Monday. Its dishonest sale, replacement was advised possible by Marcella, that it was just a matter of course to get an okay from Whirlpool. This is not so. There is no replacement or return policy. Please help. Thank you.

We have been very happy with our appliances that now over 11 years old and doing well. We love our gas range top. They gave greater and new models so we love Whirlpool and GE. We always get great deals at Home Depot.

We purchased a Whirlpool conquest from Lowes in 2009 and purchased a Lowes warranty. About 2 years ago we started seeing hairline cracks on most of the drawers and shelves. I complained about it last year and a lady from the Facebook page did offer 50% off new ones. Since then we have not been able to afford to get any, and today we lost our last shelf. If I wouldnt have checked it, it would have broke along with anything on the shelf. I have never seen such horrible parts. We have another small very old fridge that has help up better than this. At this point I will never buy another Whirlpool.

I bought a Whirlpool fridge 4/23/2013. Thanksgiving it went out. I had a repair company come look at it to see how much it would be to repair. He said the compressor was out, it has a freon leak, and the electric board has a relay that is acting up. Basically it would cost $600 or more to fix. I only paid $750, mind you. Whirlpool customer service said if we pay to have it fixed then send them the paid receipt. They would then give me a 6 month service plan for future repairs if needed. Please tell me how that helps me now? A voucher for $200 or offer something to help me now. Not a happy customer. Thanks for nothing Whirlpool.

Product: Whirlpool Gold Series, Model WRX988SIBM01: Purchased 2014 at Lowes. 2nd day after delivery, called Whirlpool, refrigerator not working properly, freezer drawer will not close, condensation on outside. Sent person that delivered the refrigerator to fix problem, freezer had frozen ice behind each drawer approximately 2 inches that would not allow drawers to close. Delivery person used hair dryer to melt ice and adjusted drawers. Still periodically have to physically remove ice build up to allow drawers in freezer to seal properly. Ice maker stopped working, makes no ice at all, ice comes from inside refrigerator not from freezer, bad design.Today woke up to freezer drawers completely thawed and had to throw away all food, panel shows temperature at -2*. All food thawed and unable to be cooked/used. Called Whirlpool could not send someone until next Tuesday (4 days). We are a family of 5 and cannot wait that long. Unfortunately have called 3 other appliance companies only to find that refrigerator has to be repaired by special technicians! This is our first Whirlpool, bought because made in America, have been very disappointed with our $2500.00 purchase. Not sure that we will ever purchase another Whirlpool product, our inclination will be to buy less expensive product and choose to replace as opposed to paying recurring service calls + parts and labor.

Whirlpool Cabrio Washing Machine F1 code - We have had this washing machine for over 6 years now, and ever since our 3 year warranty time was up, the washing machine will only stop, and display the F1 code as soon as the wash cycle has completed, with 23 minutes left. To start off, with this problem, it is causing me more water, and electricity that should not have to be wasted if the machine worked properly. I called the place where I got the machine, and was told to give Whirlpool a call. I did this, and was told that there was nothing that could be done, and if I would like to schedule an appointment for a tech to come out and work on it, they could do that. YES, I would have to pay for it. Needless to say, the washer has been doing this for over 6 years, and if there is a way to get it fixed WITHOUT having to pay for the repairs, that would be wonderful.

We bought a new oven/range in April 2019. December 7th 2019 it stopped working. No power at all. We contacted Whirlpool about our unit as it was still under the year warranty. They contacted their local repair company. 3 times they have said they were coming out to fix it and they had the part. Three times they have told us never mind. They didnt have the part and would have to come later. Most recent update, they wont get the part until the 20th and wont make it out until the 23rd. That is over 2 weeks after our unit broke and it is the holidays and we will have family visiting. We have tried to get answers about what is really going on and we keep being told they cant help us or give us any answers. So frustrated. You can bet I will never buy another Whirlpool appliance again!

They attempted to fix our fridge, 1 year into owning, claimed no parts available. Never fixed, fridge died. Refused to repair. Offered us a 15% Visa gift card on another Whirlpool. Unacceptable, they can’t fix their product, and will never recommend anybody go through my familys $3,500 wasted fridge experience. Don’t trust them, they lie, and just escalate it to another liar in the customer service department.

I bought a 40 gal. Whirlpool water heater from Lowes. It was just outside the 6-year warranty when the pilot light went out and wont relight. I called Whirlpool. They are about as worthless as box of rocks. They refuse to replace the thermocoupling free of charge or at least no shipping charge, when they know in fact there is a problem. It was because no class action lawsuit was filed. Its too bad for the customers. I wished they would have just said: “lady, please take your business somewhere else.” It would have made things easier. Or, better yet, they should just put a sign on their water heaters in the store stating: “If you have problems with our product, sorry about your luck. ** you and have a nice day.”

Extremely unsatisfied with their customer care. I purchased a washer and dryer 18 months ago and did not choose to purchase an extended warranty. I currently need a main control board replaced after the machine stopped spinning and draining. I hired a wonderful handyman, who originally suspected the lid--locking mechanism was the problem. When that was replaced and the machine still wasnt functioning, he determined the main control board needed replacing. This is a manufacturer defect and costs approximately $300 for the part, not including labor. Of course, my machine is no longer covered under the extremely limited manufacturers warranty that only lasts for 12 months, so I am stuck picking up the bill. Once done with all the parts and labor, its cheaper to buy a new washing machine especially because they still wont add a warranty to it after its fixed. I think its absurd that a manufacturers defect isnt continually covered under warranty no matter how old the machine is. Customer service continued to tell me I should have wasted more money on a company that doesnt care about customer satisfaction and purchased an extended warranty originally. Horrible investment! Will never purchase Whirlpool appliances ever again!

My Side-by-Side Whirlpool fridge which I bought very expensive in Colombia one year ago had the glass shelves totally cloudy and foggy. You could hardly see what was inside. 8 technicians were sent through the authorized center to meet warranties to check the fridge. The first 7 technicians(!) did not have a clue of what the problem was. After many calls, they sent a supervisor who discovered the problem and finally, after 10 months of this battle, they changed the fridge for a new one. But guess what?! I received the new fridge 2 weeks ago and the new one has exactly the same problem. I am very disappointed and I do not know what to do at this point. Going through the same process again makes me sick but losing my money and all the time invested in this product makes me furious. Is there any way that Whirlpool can help me through this forum?

My Whirlpool Duet washer was purchased on August 2006. The first one had to be replaced as it flooded my laundry room on the first floor and the basement – not once but twice. When I was told that they would send yet another service person out to try and fix it, I told them it would be at the curb and that I was looking forward to filing a lawsuit. Then after being on hold for forever and getting the company that sold me the unit involved, they replaced the washer at no charge.From day one I hated this washer machine. If you failed to take the clothes out immediately after washing, they would get a musty type odor and I never felt the clothes got cleaned enough. Yesterday, I went to empty a load of laundry and it was soaking wet with water pooling in the bottom of the barrel. Today, I had a certified Whirlpool tech come and look at the washer and he told me to put it at the curb as the rear bearing is shot and needed to be replaced. He also told me not to buy another front loader and the cost of the repair would be approximately $800.Thank you to Whirlpool for manufacturing a true hunk of crap that, may I say, cost me $1300. I will make sure I tell everyone I know that your products are crap and I would rather wash my clothes by hand. I did call the WP customer service number and was told that this is unheard of and that these machines rarely have any problems. After just reading multiple complaints of the exact same problem, I now know that this product is inferior and the design of the bearing assembly is seriously flawed. A major recall is probably in the near future and Whirlpool is hoping that most people will just dump them before the recall is made public.

I’ve had my Whirlpool Duet for 12 years and it has been a great one. I’m a mom of three sons, all of them wash their own laundry!! Lots of loads are done weekly and it cleans well! We leave the door opened after it’s unloaded so the tub will dry. Every few months, I put a tab in it so it will clean out all of the buildup. I don’t get the “front loader smell” that way.

I bought a Whirlpool water heater 5 years ago and after one year I had to replace the thermocouple every 3 months. Each time I call to complain, they would just send me a new thermocouple. I asked them several times to replace the item and they refused and just continued to send me replacement parts and refuse to honor their warranty. The water heater had some type of defect, but they still refuse to replace the item and did admit on the phone they have records of several parts that they sent.

My Whirlpool Cabrio washing machine. f1 keeps showing up on washer on. Shuts off again and again.

My husband and I purchased this washer in August of 2011. Within 2 years the lid broke because of it a cheap plastic frame on a heavy glass lid. At that time I researched it and found many people with the same complaint. Whirlpool would not do anything for us but the company that we purchased it from did agree to supply the part if we paid the labor. We did this and replaced the lid. Well here it is just right at 2 years again and the lid is completely broken and the washer is unusable. There is no way to bypass the lid issue which makes the washer completely useless.I called Whirlpool again and was told there was nothing that could be done and that because there was not a recall on the product, they would not be able to do anything for me. We have purchased a new Samsung washer that received excellent reviews from Consumer reports and we will NEVER buy another Whirlpool product again. I cannot believe a company that old and as large as Whirlpool will not stand behind a faulty design and faulty made piece of equipment. It is very disappointing.

A couple of years ago I replaced my Whirlpool gas range because after seven years, the house was growing a gas smell that was becoming stronger. I called the gas company and they determined that it was the oven and not their problem. I called an appliance person who could not find the leak but charged me for the service call. Before I had him leave though, I called the gas company back and had the two talk. There was a conflict with their assessments. The service guy left frustrated. The gas company guy came back and again checked and told me that the oven is definitely leaking. He told me they use instruments, not soap, to determine leaks. With this, I was mad at the appliance company. After voicing my frustration, they were going to allow me to purchase a similar new Whirlpool freestanding gas range at a discount and deliver it for free. I relented and spent close to $600 for the new range. After installation, I realized that the quality was cheaper than my old one. The metal rods in the oven racks are thinner and less of them so they are further apart. The cooktop grates are already wearing and chipping. But the thing that has irked me the most is the burners. You cant adjust them to low for a long simmer because the flame goes out, not immediately, but when youre not around to watch it; and the whole house smells of gas fumes! I called the appliance store and they said that because I didnt buy an extended warranty and that a year has already passed, I would have to pay for the service charge. I called Whirlpool and they said that they have not encountered this problem with their stoves yet. Even while on the phone, I could turn every burner on separately and the flame would go out in a circular motion as I turned the knob to low. The only suggestion they had was to call my appliance company and have them look at it. I got nowhere and I was quite frustrated! These Whirlpool stoves should be recalled! Gas leaks are dangerous! I will never buy a Whirlpool again!

I purchased 4 whirlpool appliances at Leons in Mississauga. The side by side refrigerator was replaced within a few weeks. Got a new one and have had that one fixed at least 3 times already. The stove was serviced 3 times now, the washer broke so many times. They gave me a refund. The microwave broke as well. They told me it was not fixable, then I called Leons and they said it was too old. It was only 18 months old. Did not get anywhere with the microwave. Had to buy a new one. The only appliance I had that didnt break was the dryer. So far. The fridge now has broken inside, the crisper wont slide in and out at all. Cant be used. I bought a warranty on all the appliances, and even though I had a warranty, when a coin got stuck in the washing machine because the drum inside kept banging because it was in need of new struts, they still charged me 135.00 to fix it. Two to three weeks later a repairman came and put new shocks on it. Finally after having it repaired about 5-6 times in a year and half they gave me a refund at Leons and I went to pick out a new washing machine. Overall I have spent about 6-8 hours on the phone complaining and making appointments with Whirlpool Canada.

The machine purchased in 2011, 3 years old, will cost as much to repair as to buy a new one. I got exactly no satisfaction from Whirlpool. They said there is no recall so they wouldnt assist. There are only 2 people in my house, so how could the washer be so junky. What would a large family do? I have spent $140 and wont spend another dime on a Whirlpool appliance.

Switched to bottom freezer and love the size. We all use and enjoy the filtered water. Whirlpool has proven to be a manufacturer I will always consider when making major appliance purchases for performance, service, and dependability.

I purchased the washer and dryer set. My complaint is with the washing machine top loader that does not have the tall agitator not getting the clothing clean. All of my clothing come out of the dryer with dirty spots on them where they did not come out in the wash. Its a waste of water and energy because I have to wash them twice! I purchased the combo model numbers WED7300DWO and WTW7300DW0.

I just bought a new dishwasher because my 5-year-old one went out, model number DU1145XTPBA. After pulling the old one out, I took the motor out and lo and behold, what did I find but bad bearings. The motor was fine, just the bearings were rusted out and were jamming the motor so that it wouldnt move. The price of a new motor, $149.00. Well thats a bit much for something that only lasts 5 years. I went on eBay and found them for $70 to $170.00. So if you have a problem where your dish wont wash at all but fills up with water, it may be nothing more than cheap bearings in the motor. If I, myself, were this companys CEO i would really consider changing companies that they have making these motors or at least the bearings. Just wanted you to know that this is the only problem I have had with this one and Im going to replace the motor now that I know what it is. Thank you Whirlpool for a day spending repairing and replacing one of your dishwashers. I learned a lot.

In July 2018 I purchased a coin operated commercial front load 27 in washer and dryer. It was placed in and used in a six unit apartment building occupied by 8 long term adults. Prior washers and dryers had been operational for years with minor repairs at times. In June of 2019 the interior cement center balance on the top of the washer drum broke with resulting damage to screws securing the center balance and potentially other unknown parts. This was reported to Whirlpool customer Care service and they referred me to one of their a repair services. The repair service in about early August repaired the washer.In late September 2019 the cement balance broke a second time and this was again reported to Whirlpool service who requested I notify their recommended repair service. On inspecting the washer the repair service stated the entire washer was required to be rebuilt. The labor for installation of would cost me $1,125 with Whirlpool providing the parts under their warranty. The $1,125 labor cost was just under what I paid for a new coin operated front load washer. I reported this to Whirlpool whose supervising staff, without any inspection of damaged washer as to determine whether the washer was fit for its purpose when sold as a commercial washer, rejected any replacement of the less one year old washer and insisted they would only pay for the parts and I would have to pay for the labor, particularly when the both the cost of the replacement parts and the labor would be substantially in excess of a new machine. Due to time and effort constraints the problem was resolved by simply dumping the defective washer and purchasing a new commercial front load washer from a more responsible company.

I purchased a washer and dryer from WHirlpool in March of 2019 based on the good word of mouth information I have heard from others. Today I reported to WHirlpool customer service how all my brand new towels were destroyed during the week of 9/8/2019. The towels were purchased on 9/3/2019 and are now unusable due to a defect from the washing machine. I called into the customer service to ask what they can do, they completely refused to cover the cost in any way. Original cost was $448.00.

I bought it a year ago and the warranty is not even up and only in about a month the freezer door handle keeps falling off then the stainless steel which probably is fake is rusting too. They replace the handle and the door and the handle still keeps falling off and the doors are rusting again. My GE stainless steel dishwasher and stove are five years old and there is no rust on them. Whirlpool says it is cosmetic and that its not covered under the year warranty. I will never buy Whirlpool again. Awful customer service!

We purchased a Cabrio model WTW6600SB2 washer, it has lasted 4 years, then when the pump went out, we paid $200. To fix it then on the 2nd load, it went out, now the tech man says the motor is cracked and Im not sure if the motor is replaced, it will even work. I looked at the motor and it is made of plastic! Can you believe this? Plastic! I didnt believe it until I saw it with my own eyes. I will never purchase a Whirlpool appliance again nor will any of my relatives or friends if they ever ask my opinion.

Whirlpool gas range Model#wfg10h0ah1 with aqua lift technology. This is the biggest ripoff that was ever done to me. It say self clean, not it cleans and then you clean. This is fraud plain and simple. I am handicapped and made it very clear to the salesperson that it had to be self cleaning. 4 times I did the clean cycle and I was in shock, I called repair, I thought the self clean was broken. However this is the line they give you over and over, that its not broken. This is working the way it was designed to work. So they made a range that is self cleaning, but no it doesnt do that. For 899.99, I did not deserve to get duped like this.

We have been married 36 years. Since year one, me and my wife have owned nothing but Whirlpool appliances. They lasted forever. Approximately 4 years ago, we redid our home, and bought all new appliances, stove, refrigerator, dishwasher, microwave, front loader, washer, and dryer, Since then, 4 years ago, our refrigerator ice maker stopped working. 2 years ago, our dishwasher wont heat up, so it is useless to us, and the bearings in the washer are shot. I must say we are so disappointed in Whirlpool. We are barely living on my husbands income as I had to stop working 3 years ago, as I became disabled, but did not make enough money to be able to collect disability. We cannot afford new appliances, nor to fix them. I am sending you the model numbers of each appliance, hoping you will do something to help. This is just ridiculous. It is just my husband and me in the house (washer: WFW9200SQ02; refrigerator: GD5NVAXSA01; dishwasher: no model number, but it is Energy Star II 8575637). Please help. We cannot afford to replace this, nor repair. It is hard for me to go to the laundromat, then come home to dry. Standing long periods to to dishes, takes a toll on me. Please help.

I purchased this refrigerator, approximately 3 yrs. ago. Right away the top crisper broke. I have put up with this broken crisper only to have broken the PLASTIC lips that hold the crisper to the top shelf. Piece of junk. I looked to order a new crisper but way to expensive so I just suffered thru. I cant even use it anymore as I cannot open or close it without it falling onto the bottom crisper. Would like to throw the thing out, but cannot afford another one. IT WILL NOT BE A WHIRLPOOL!!!

I bought a new Whirlpool refrigerator from Sears and within a month the refrigerator side did not maintain temperature where milk would not spoil... Cool but never cold. I called Sears and they said its Whirlpool warranty to contact them. This I did and about a week later they contacted a local service company they use to maintain their equipment... Long story short this will be the 4th time they were informed the refrigerator still doesnt maintain temperature... Food had to be thrown out because of that.I asked them to refund me my cost or at minimum get a working refrigerator to me because after 4 attempts at trying to fix the problem it still exists... They just want to keep sending a repairman out there who still cant figure out the problem and that has cost me much time away from work not the mention the spoiled food costs... Even when complaining my dilemma to the repairman he said, All they will do is keep calling us and kick the can down the road... They could care less about what it has cost me in time and money... I had to give 1 star to this company but they dont deserve even that one... Dont waste you time thinking a warranty by them is worth a flip and now over 3 months Im without a refrigerator...

This is one of the best washers I have had 4 years now. The spin cycle is great. Feel almost dry when done. My daughter was going to order this set but cant get them anymore. I guess it is because it is too good of a washer.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

This Whirlpool washing machine is incredibly annoying and slow in everything it does. First off when you press the START button it takes 2-3 minutes before it decides to do anything, like maybe add water (except click, click and more click). If you have pressed the start button and you want to stop it to add something... again you have to wait almost 2-3 minutes before the lock is released and you can open the door. I am at 2 hrs and 15 minutes as I write this on the LIGHT WASH cycle with extra rinse and its still going. I have never seen anything like it. Cant imagine how long a HEAVY CYCLE takes. Cannot even try to measure the time. I put the load in and go to work and hope its complete when Im done 8 hrs later.We had a Maytag for 15 years with no issues (other than a drain hose cracked and had to be replaced) and it was time for a new one with a move to a new place. The sales associate convinced us this was the best machine at the time... Well what a mistake that was. There are no complaints about the actual washing. Everything comes out clean but I suppose taking that long I cant imagine why it wouldnt. I certainly cant recommend a Whirlpool washer to a friend, because I dread the thought of doing laundry at this point.

Purchased a Whirlpool hot water tank from Lowes 5/12 and have had NOTHING but problems with it since day 2. The tank I replaced was around 20 years old, never a drip, never a problem, it just finally rusted through.. Well this piece of JUNK I had installed is just that JUNK.. I have been in contact with this company many times, they ALWAYS have a new story. I replaced my old thermal expansion tank 3 months after buying this JUNK because I was told it could be that. Well that didnt fix anything and cost me $60.00, then it was pressure relief valve, ok, another $20.00, nope not that. Well back on the phone and emailing this company, now they tell me I am not vented correctly, because with all the repairs being done on this tank, my Son noticed the top plastic pieces melting. Well back on the phone I go, and of course Whirlpool tells me, its me again.. Had piles going into my chimney replaced, no help, replaced thermal expansion tank again, no help, replaced pressure relief valve, no help. So sick of cleaning up water I want to throw up. Well I now know why they say, do not return to store where you purchased it, because it is bad business to have Lowes parking lot, looking like a Whirlpool graveyard for their product. .

We purchased a Whirlpool Gold Induction range, model#WF1910H0AS0, from Lowes Home Center for ~$1700.00, about 1.5 yrs ago. One night my wife was cooking dinner on the stovetop and she heard 2 loud pops and the whole cooktop went dead. We had Bobals appliances repair look at the range and they gave us an estimate of $800.00!! to replace the module board. The repairman said the module board had shorted out and burned. Thankfully my wife wasnt electrocuted. I contacted Whirlpool customer service, they said, There isnt anything they can do. The warranty is only 1 year. I also contacted Lowes customer service. They told me the same thing as Whirlpool, nothing they can do, 1 year warranty, etc. I have the part# of the module in the stove, W10390743, serial#31811552. After an internet search, this part # had been superseded, which tells me Whirlpool knows they have a problem. These ranges need to be recalled. I plan to contact the US consumer product safety commission to initiate a recall. Please inform consumers if they have this Whirlpool induction range with this problem, to also notify the Consumer product safety commission.

40-gal gas water heater - I own several rental properties and unfortunately put Whirlpool water heaters in them when the old ones go. It is because they are at Lowes and they are cheap. Today, another call came in from a tenant with no hot water. I called customer service and they determined I received the repair kit from an original design defect from back in the middle 2000s. Now 3 years later, it goes out again. Because I have already received the conversion kit taking thermal couple threading from LH to RH, I needed another part number to repair for a grand total of $160! The same part before the conversion kit was $60. I will never buy another Lowes/Whirlpool water heater for as long as I live. I own a hundred rentals and Whirlpool will never again see another cent for the junk water heaters.

My $800 Whirlpool Cabrio top loader does not rinse the soap out of the clothes. Nor does it even get the clothes completely wet. After the final cycle I have soap scum in all the wrinkles of the clothes. Most dissatisfied purchase I’ve ever made. The one-star rating comes from the pretty blue digital displays. I’ll be purchasing another; this one goes to the dump where it belongs!

Whirlpool Cabrio top loading washer model WTW6800WW1 - I bought this washer 3 years ago. It cost me about $900. It has become very loud. I had the repairman here yesterday fixing my dryer. When he heard the washer, he told me the bearings are gone and its just a matter of time before the machine dies. To fix it involves a total rebuild of the motor, about $600! WTF! This is my 3rd washer in 19 years. There is something seriously wrong with appliance manufacturers. They no longer care about their reputations, and just produce crap! Expensive crap! Needless to say, I am now shopping for our 4th machine, which will be a Speedqueen basic washer with a 3-year warranty!

We purchased a Duet from Lowes just a few months ago. Within 2 weeks we had an inoperable machine. After 2 phone calls a service technician came out and looked it over. He had to come back a total of three times to replace the motherboard. That worked for about six weeks and it died again. He came out again and replaced the motherboard again. Fast forward two months and the machine is once again inoperable. When plugged in, it makes an ominous growling sound but nothing else happens. The idiot who designed this thing has no common sense. Its programmed so that it will LOCK on any failure. Not only has every one of these episodes left us with a load of clothes in there getting moldy, you cant even get to the model number or serial numbers; both of which are only visible inside the rim of the machine.So adding insult to injury, your machine is broken, your clothes are in there getting ruined, and YOU CANT EVEN GET TO THE INFORMATION YOU NEED TO SET UP THE SERVICE CALL. If it had only happened once, Id laugh, but this is the third time and its not funny. We bought this machine because it said proudly made in USA. Next time, Ill support the Korean economy and buy a reliable, durable Samsung. The only positive I can offer is that the Whirlpool live chat person was able to set up the service call for me even though I cant get to the relevant data inside the machine. DONT BUY A WHIRLPOOL WASHER. Despite their legacy and US-feel-good associations, the sad truth is that they are poorly engineered and poorly manufactured.

Bought a new $899 dishwasher 7/2020 and it stopped working 10/2020 And it’s been weeks and now I’ve been told it will be another 21 before they can replace it if at all! #whirlpoolusa #whirlpoolcorp Customer service lady was rude with an attitude.

I bought my fridge in late 2008 and I am already experiencing potentially expensive repairs due to what I believe is a defective design system, of which, consumers are having to bare the consequences for those who collected our hard-earned cash and delivered a lousy product! I saw so many similar complaints about the ice system on this fridge that I am almost positive that it qualifies for a class action suit and settlement. How about a collaborative approach to this since we have all suffered needlessly? Tell me what you think and if you are in on it.

I never knew an appliance could be manufactured as poorly as my brand-new, expensive, side-by-side whirlpool refrigerator. Within the first year, the icemaker line malfunction because of a fan problem, causing the line to freeze, break, and leak water everywhere. The ice maker stopped working. Everything on the top shelf In the refrigerator freezes. Everything on the bottom shelf stays warm. The motor is so loud and can be heard of rooms away. It is less than two years old now, and I am sincerely considering buying a new refrigerator altogether.

I have had a plumbing company work on my Whirlpool water heater three times in the last two months. On the third visit, he told me all the problems customers have had with Whirlpool water heaters. I decided to call Whirlpool for warranty purposes. The unit is three years old. I was told that it was the gas valve, and I was given a free one from Lowes. After installing the new valve, it still did not work properly. After troubleshooting with a technician, I was told it was the orifice. I have had to do all the labor myself, and I dont know how long this is going to go on. I have heard Whirlpool will continue to give you the runaround (from the plumbing company and Lowes salesmen) and will continue to give you the runaround and not replace the unit. They are wearing me down. I have been without hot water for three weeks with no end in sight. I am ready to give up and just buy another water heater but certainly not a Whirlpool.

Bought a new oven for my new kitchen. Two weeks after install, I had to have it repaired. Less than 6 mos. later, it is being repaired again, for the same problem. Whirlpools policy is to fix it till the warranty runs out, then not their problem. Buyer beware, and if you do buy, make sure you get the extended warranty.

I had a 6 year warranty on the new Water heater and about only 4 years into it the tank began leaking. Whirlpool replaced it but of course I was responsible for Parts and labor to replace it. The replacement only lasted just over only 2 years and just outside the total of 6 years from original purchase date on the first. Whirlpool refused to discuss it since it was a few months out of warranty. If someone else has purchased this heater it would have failed at 2 years and they would have had to warranty it anyway. I will never own another Whirlpool appliance because of their substandard products and warranty. I only wish I had reviewed the reviews of others and taken their experiences into consideration and not purchased Whirlpool. I am now out for another heater and reinstallation charges again.

I have owned an Accubake gas range since April 2012. The range is 3 months out of warranty, and the oven will not light... just a clicking sound and gas pouring into the oven. I have also had problems with the burners being turned on by brushing against against the knobs. I have a note by the stove to remind myself to check that the knobs are in the OFF position. My 1 year old grandson turned the burner on just by touching the knob... NO SAFETY FEATURES!!! I havent checked to see what a repair is going to cost me, but if it is several hundred dollars, I will just replace this piece of junk. It is very sad that a costly brand new appliance only comes with a one year warranty. I will never ever buy another Whirlpool appliance!!

This is the worst washer/dryer I have ever had. It is so damn loud that the neighbors can hear it. Water level is too low. Today the dial is making a buzzing sound. I have to re-rinse the clothes. It does not spin enough, have to re-spin again. What kind of energy saver is this, NONE. They said thats the way the machine is, loud, thats bull. No machine should be like that. I threw money away when I bought that piece of (you know what). Dont buy this machine. Consumer Affairs, you should pursue this product with Whirlpool and have them do something about it. They do absolutely NOTHING.

Whirlpool Cabrio TLWasher purchased 2011. Doesnt drain, no spin, inconsistent cycling, poor washing action....wont even attempt to repair, in light of reading product reviews and consumer experiences with this washing machine- $600 junk.

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

My refrigerator will be 3 years old in September. It stopped working two months after my warranty ended, in November Thanksgiving Day. I was so thankful that I had snow on my deck to keep everything cold. I had several family members in my house and watching my husband defrost a frost-free frig? This was a nightmare. Then a few weeks later, my husband company refrigerators did the same thing: freeze up and stop working. He defrosted theirs as well.I know that lots of consumers have had the same issue with any of the bottom freezer refrigerator doing the same thing. I think we, consumers, should make these company recall these lemons. Why should we have to pay more and buy more our parents had their appliances last for years. He had done this approximately 3 times since my warranty ended in September of last year. The problem is the food goes bad, the freezer ices up, causing the refrigerator to ice up and stop the air flow.I contacted the company and this is what they told me: I had to pay $295.12 to get the repair completed. It was the DEF control board. I guess others have the compressor go out and that cost over $600 to fix. Why is it our fault as a consumer buying their products promised and concern for 1 year, not 10 years. It is no wonder why America is broke? My question to the Whirlpool was, how on earth can this be the consumers fault? Here is their reply:According to the model and serial number provided, we do not indicate that there are any known recalls with this particular model. A recall requires that a product poses a threat to a persons life or health. Since this is not the case in this instance, we do not have a recall. Once a product warranty has expired, any costs for maintenance, service, or component replacements are then within the owners time frame of responsibility. Taking this into consideration, I regret to inform you that due to the age of the product, we will be unable to assist with the cost of the repair. If you have purchased an extended warranty, we would recommend contacting your extended warranty provider directly to discuss the options they provide.Oh, they sent me a postcard asking if the repair service I received was good... Yes, the company who came out did a fantastic job. I think I may have to call them back; it is acting up again. I have 90 day warranty....

Mid-sized, mid-range dishwasher. It is noisy, not quiet at all, and we must speak quite loud over it if we want to be heard. The wash cycle is quite long... not really a water saver.

My dog is afraid to be anywhere near my Whirlpool side by side fridge. It makes horrible noises every 15 minutes to half an hour. I have to coax her to even let me escort her past. It has been snap crackling pop for several weeks and is getting louder with thumps and clangs. It does sound like the devil inside. Appears to be coming from the freezer side.I do not have the ice maker hooked up . It is plumbed for an ice maker but the servicemen who delivered it advised me they didnt do that . I didnt have the money to hire a plumber. The fridge was a PG& Energy Partners project in which those of certain age and income levels were presented new energy savers in exchange for old ones.Wish Id have kept the old one, especially after reading comments here. A senior, I live by myself in a fairly isolated area. I wonder now if the noise means a fire or electrical problem is imminent. My model number: ED2KVE*V*O, ED2FHE*V*O*

I purchased a new style topload washer (Whirlpool) without the center post approximately one year ago at Lowes and have had nothing but problems with it since day one. It does not clean the clothes and will not spin.

Bought this because it was a Whirlpool product and liked how it was supposed to work at the store, HhGregg in Downingtown. Anyway one week in we started having problems, clothes not being washed well, and constant problems of dripping wet clothes, like they were never spun at all. Would have to readjust all the clothes, respin, most times we have to that that every time we wash clothes and have to respin more than once and even then, clothes have too much water left in them, so it takes forever to get our clothes dry. We have a service contract with Sears, we have repairmen out a few times. Get told, dont wash towels in it, only do very small loads, supposed to be a large capacity washer, nothing wrong with it. Now its worse than ever, terrible product. I want a different washer, its rusting at the lid, its only at the most 2 yrs old, it was expensive and am very, very frustrated!!! I want what I paid For!!! Whirlpool, shame on you for putting out such crap.On to my next problem with a Whirlpool range, again bought it because it was a Whirlpool. We had our Kitchen remodeled and the range I had was white. We needed a stainless steel range, Bought the Gold series AquaLift convection oven. This is the most horrible piece of crap. The convection oven does not cook as a convection should, food takes forever to cook on convection, reg feature works faster and hotter than the convection. In my old range I used the convection feature always unless I was baking a cake. Then used the AquaLift feature to clean my oven, it was not dirty , but I like a sparkling oven, so followed the directions, set it to clean. It looked the same after it supposedly cleaned the oven. Nothing was cleaned, tried it again, it was a little more dirty, something had spilled. I wiped out the oven, used the AquaLift self cleaning feature again, same results, old oven, self clean, the oven after a cleaning cycle, only ash was left, wipe it out, it was spotless. So I called for repair, the repair guy was here about 5-6 different times, tried this and that, replaced a heating element in the oven, turned the temperature up in the oven, so now when I bake, I have to figure out what temp I need to put it on. Tried that, even admitted that the AquaLift feature was a bust. I contacted Whirlpool, I want it replaced with a different model. This range is about I and a half years old, want to replace it but again was very expensive. Its a terrible product, it cant be a coincidence, that both newer appliances made by Whirlpool are terrible!!!! Combined they cost me almost 3000.00 dollars. I feel that I have been ripped off definitely did not get the great products that I thought I was buying. No response from Whirlpool, no satisfaction. I want them both replaced or my money back, take them out of here, they are useless!!!!! I will NEVER buy another Whirlpool product again, and have told everyone I know about the terrible quality of these products.

Special features eg changing HE detergent conc. ratio for auto add feature in Load and Go is impossible to find, extra rinse doesnt work. No extra spin which would be useful for bulky loads. But preset cycles work fine and machine has very low vibration a big plus.

On 12-22-13 we purchased a new Whirlpool Washer- Model=Top Loading-WTW4800BQ. We also purchased Lowes extended warranty. Washer was delivered on 12-24-13 around 1:00pm. Connected washer. Washer filled with water. System started but would not wash. 10 minutes later it rinsed and drained but would not go thru wash cycle. We clicked the cancel button for 3-seconds to restart. Same problem. Called Lowes - Lady name Kelly continued to tell us we did something wrong. She would not listen and continued to say its Christmas EVE. Finally the workers came out to check it out around 4:00. Confirmed washer is defective and new washer will be delivered on 12-26-13. Confused as to the label on the machine says made with pride in America. Our 20yr. old Cabrio only lasted two years and went up. Never buy another Whirlpool product!

I have a nice basic fridge, 2 side by side doors on top and a freezer on the bottom. Also has ice and water on the door. It does exactly what it should do, keep my food cold! Works great, lots of room and has adjustable shelves. No weird electronics to break. Had it for 3 years and I love it. Also, its American made which is important to me.

I have bought Whirlpool washer (small size) and dryer less than 2 years ago. The washer started to develop an error f6, as it shown. Finally, machine could not work as far as warranty was expired. The Sears technician made very quick overlook and told that probably engine was gone and advised to buy a new machine, as repairing parts are not available in Canada. He charged me 96 dollars for that.

I have not had any issues with my washing machine yet as I have only had it for two and a half years. The features the machine offers are good and there are many options. So far the washing machine has worked as advertised / expected.

I love my Whirlpool 4.7 cu. ft. top load washer because it has a pretreat station that is super handy for pretreating stains in a handy little place. The agitator is stronger than my old washer and really gets my clothes cleaner. Its also very quiet and easy to use all the buttons. The best feature is the deep water fill that you can select for more water.

I have been married for 43 years and started my marriage with a Kenmore Washer and Dryer. That was because my mother, aunt, and grandmother all had Kenmore Washers and Dryers. Kenmore was made by Whirlpool. In 43 years I have gone through two sets of Kenmore Washers and Dryers, and one set of Whirlpool Washer and Dryer. I have always been very pleased with your product and have never considered buying anything else. However, last year we bought a new Whirlpool washer and dryer. I have no complaints about the dryer, but this washer is a piece of **! It is a cabrio top-loading high efficiency low-water washer. What idiot came up with this idea? Tonight I am once again having to divide my washer load and run them for at least a second time. This is not cost effective!!! This sprinkling with water and sucking it out doesnt work. Not to mention that since we have gotten these wonderful energy saving appliances our electric bill has increased instead of decreasing. You need to make a washing machine with a wash tub and agitator like you use too.

I purchased the Whirlpool Cabrio Top Load Washer in 2009. It stopped working and I found that it needs a new control panel and recirculating pump which will cost $390, including labor (plus the cost of the service call to diagnose the problem). I would not have expected to have this type of problem with a washer within 3 years of purchase. I cannot recommend this machine.

This aqua clean is garbage. Had Whirlpool with heat clean perfect. Now have to clean my oven with self cleaning over easy off. I am so disappointed. I always thought of Whirlpool as a good choice. And have bought Whirlpool before. But not after this. Bad, real bad.

Whirlpool has been an absolute nightmare from day 1. We bought a brand new 50-gallon water heater from Lowes. It did not work. We went back to Lowes and were told to contact whirlpool. We contacted Whirlpool and were told to conduct a number of test and all test passed, so they said we needed a plumber to come look at it. Remind you that this water heater is brand new and has not worked since day 1. They said the plumber would cost $130 and they would pay for parts. Why am I having to pay when my water heater has never worked. Paid the money. Had them come. They replaced a part, did not work, replaced another and it did not work, so the plumber requested a new water heater. Whirlpool refused. What is the point of paying and they are not going to fix it.Whirlpool insisted it was our ventilation even though all test proved that was not the problem. So out of pocket again to fix the ventilation and it did not work. After 2 months of no hot water with a two-year old at home we had someone we know come look at it and fixed the main pipe. Whirlpool took my money and didnt fix my problem. HORRIBLE SERVICE.

The most horrible stove I’ve ever owned. The self cleaning oven never worked, the oven whistles while warming, the alert stops working after a few times, there is a razor sharp hidden vent under the dash of stove on which I cut my hand when cleaning. Customer service is nonexistent. Never never never buy Whirlpool.

Last year, our clothes started coming out too wrinkled. And until recently, its making a loud noise like an airplane. I called Whirlpool, and the only help they can give me is finding a company that would do service and would charge a lot.

We had purchased a Whirlpool Duet Sport Washer and Dryer in 2007. Since that time we have had several repairs on the dryer, resulting in us having to purchase an entire new unit in 2011 (4 years old), along with mold that has accumulated in the washing machine on the tub and rubber seal that cannot be removed after several attempts utilizing several products that were recommended. The end result is our laundry that has been washed - comes out with a musty odor. Not happy at all with the top of the line, best possible machine to produce clean laundry as was sold to us! This has been a nightmare, and a totally dysfunctional appliance that should have lasted longer than 5 years!

One year old Whirlpool gas oven/range w messed up control panel. Every brand new Whirlpool so far has broken or is messed up within first year of purchase. I am going to complain to BBB.

We bought all new appliances, and within a year, the range and microwave are not working correctly and the refrigerator has rust on the doors. We called about the rust on the doors and were told that it is not stainless steel as advertised and rust is not covered. Fortunately, we purchased an extended warranty, which will cover the repairs to the oven and microwave. Well see how it goes. Stainless steel appliances really arent stainless steel, so they are misrepresenting their products to many people.

Our 27 cubic foot BLACK French Door refrigerator is freezing up again for the 4 or is it 5 time. We are now told they will give us a replacement and to go to the website and find what we want. The website lists DISCONTINUED fridges. Called their RUDE rep and found out only can get a Smaller, stainless steel ONLY refrigerator. So is that how they work, sell crappy refrigerators and then replace with a lesser refrigerator, which most likely will break down too. SHAME ON WHIRLPOOL. Or is it DEADPOOL. Your reputation is shot. We will NEVER purchase another piece of junk from you!!!

My new ACCU-BAKE oven was not baking properly. Always uneven results. Finally called for service, just in time before the warranty expired. The service rep informed me that I had not bought a convection oven. Well, duh! Of course, I knew that! He tested the temperature levels inside the oven and found a variance of 10 degrees Celsius, which he reported by phone to the company. He advised me to reach into the oven half-way through any baking process to turn my cake around, and it would bake evenly. I asked him if he had ever tried that himself. No, he said, he was not a baker. That was the end of the service call. No follow-up, no service. Today I learned that the company actually has this exchange in its records, but if I want to get the oven to work properly Ill have to pay for service, as the warranty has expired. I wonder what would happen if I ever tried the self-clean or Sabbath mode features on this oven.

we bought a hotwater heater and it gets scalding hot set on the low setting, we had the gas valve replaced by a@e paid for by whirlpool. It still gets above 125 degrees,set on vacation with me using it all during the day.I have contacted them several times, they told me to let the hotwater run about 10 minutes everyday, or just turn the heater off and let it cool off. I bought a water heater to use not light the pilot everytime I need hot water.

Im so tired of the mold smell that never goes away, even after following their cleaning cycle many times over. I dont know what to do but I spent extra $ to purchase my washer and now this!

I like my machine even though there is no agitator. It is a top loader so it does not smell. It is a water saver which, when I first got it, I thought that it could never clean the clothes in that small amt of water...but it does clean the clothes very well.

After 2.5 years seal around door melted on microwave. Whirlpool Corp sent a repairman to do a safety check. Said unit was ok to use. Plastic seal on for area totally melted about 2 inches wide. Co. Had a recall about a similar problem but our serial number was not included???? Did not want to give them any stars.

I had the best experience when I purchased my washing machine and dryer. The personnel were professional and very pleasant. I am quite pleased with my washer and dryer. I have had a couple of minor problems but the warranty that I had on them was excellent.

My washing machine quit working with one month left on the warranty. In trying to schedule repair I was never able to talk to a live person. Via chat and online scheduling they could not or would not come out for 10 days. Also they would not approve use of a local repairman who was willing to work on it in 2 days. Waiting 10 days for service on a washing machine is crazy.

I purchased a gas range with JDR8895 last 09/06/2007 at Home Depot in Metro Denver for approximately $1700.00. I will make my final payment on my Home Depot account next month. I was preparing dinner last September 10, 2011. I had the pans on the cooktop, one on the right rear and one on the left front burners. This was the set up because the right front burner has stopped working some time ago. Both burners were on a low setting as I was simmering pasta sauce and just warming water as I was later going to boil it for the noodles. I was in my living room when I started to smell something odd. When I approached my kitchen, there was a fire coming from the rear of the cooktop and beneath the three burner knobs. It smelled like an electrical fire. I immediately turned off the burners with my hand wrapped in a towel and started putting out the fire by hitting it with the towel and blowing. The towel caught on fire. I grabbed my fire extinguisher and was ready to spray when finally, it looked like it burned out. The smell in my home is terrible, when I tried to test the lower burner it looked like it was catching on fire underneath the knob as well, so i immediately turned it off and batted it with a towel. Im not sure what happened here. I will make my final payment on this range next month and had the previous range in here since 1977 and that still worked fine. I spent a small fortune on this Jenn-Air, only to have it catch on fire that could have potentially burned my house down.On various web sites including consumer affairs, JDR8895 has many reports of fires. If this is a known problem, why has it not been addressed as a recall? My 9-year old was making soup the day before while I was in the living room. This could of easily happened to her! It is a very dangerous situation to put your consumers in!Whirlpool Corporation contacted the appliance repair company, Columbine Appliances, to inform them that they would only be covering the cost of their visit and not the cost of the parts to be replaced in the range (the ones that caught on fire). Through Columbine Appliance, Whirlpool wanted to inform me that this is not a safety hazard and that it was my fault as I got water in the control knobs. This is not true. If I did, I was not aware and was unable to find any literature about that being a safety hazard or that it could cause a fire. I have found and have forwarded to the CPSC many instances of this exact problem, often when the range was not even in use and are happening to other consumers. I am working on combining the data, contacting the other consumers and have since refused service on the range by Columbine Appliances. Whirlpool only tried to contact me after I left them a message regarding the status of the range and that I had no interest in paying for what I viewed as a defect in their range and a safety hazard. I found a news story of this range going up in flames. Its unbelievable that this company continues to stand behind this product and blame these fires on the consumers actions. I am disabled and have an oxygen machine in my home. I have no desire to have this unit catch on fire again and potentially die, especially since water does, on occasion, end up on cooktops. Thank you for your time and attention to this matter.

We got the convection oven. It has no element like the one we had before with the fan. It is useless. We have to upgrade the temperature to get what we want. Difficult to clean. It does not cook like it should. We do not like it, period. Those electronic controls are not doing their work. No more Whirlpool appliances. Problems with the noise of our dishwasher also.

I purchased an Electric Whirlpool Aqualift convection range in November of 2012. This product is garbage! The oven doesnt work well (temperature is always off), the Agualift cleaning method doesnt work well. You have to self-clean to clean it. The most troubling problem is that just after a year of owning it, the finish on the control panel started to crackle. I called Whirlpool, and all they can do is send me a replacement part for which I have to pay for and have installed. My last GE range lasted over 15 years. This range is garbage from day 1. Hate to see what it will look like in another year or if it will be working at all. BEWARE - DO NOT BUY WHIRLPOOL PRODUCTS!

Mind you, Whirlpool products that we have purchased in the past have been satisfactory, but gas hot water heaters, no! About four years ago we purchased a Whirlpool hot water heater that went out in a little over a year. After spending many calls and time, we found out that the HWH was on soft recall. Whirlpool credited our account, but this was to purchase another Whirlpool, which we did. We paid for installation. About 2 years later, it has gone out. Same problem. Lowes says not their problem. Whirlpool says it will pay for the part only. Plumber will cost 150-200 dollars. All the plumbers I have talked to will not repair them, then they are held responsible when it goes out! As a disabled Vet I cannot afford to throw 400-600 dollars away. And, Whirlpool tells me that if they give me an RA number to replace the HWH, it will have to be a Whirlpool from Lowes. Great! Whirlpool quarterly report looks very good. Mine doesnt look as good. What can be done about a poor working product? Or is this too big to fail? Let me know.

Have always bought Whirlpool appliances and never had a problem like this. Open the door on the top loading washer and its rusting out. I am having to buy a new one but considering other brands. No complaints about the matching Dryer.

Owner of 20 apartments, 16 of them have electric water heaters and 4 have natural gas units. Have replaced over the years all 20 water heaters. 19 of them were replaced with Whirlpool units bought at our local Lowes. It is my opinion that they are very unreliable. The tanks rust out in NO time. The electric units last just a little better than the gas units but still terrible. Of the 4 gas units so far I have had to replace 3 of them and the longest one lasted 6 years and 7 months!! One of them was just over 6 years and the other was 9 days away from warranty expiring. They replaced that one. If you have no other choice make sure to buy extended warranty if available. They just dont last!!

Worst customer service I have ever seen. I have been waiting on a part for my dishwasher since before Thanksgiving. I have sat on hold for 2 or more hours. They cannot connect you to a supervisor, you just continue to wait on hold. They cannot give an eta for the part that has supposedly been in production since before Thanksgiving. I get told one thing, then when I call back for an update 2 weeks later that person has no idea what Im talking about. I will tell you one thing, if you do not want a headache, I suggest you buy another product!! I can guarantee, I will let everyone I know and never purchase Whirlpool again if this is not resolved this week! After doing my research, this part should be recalled. It is a big issue with this very expensive dishwasher.

We purchased a Whirlpool Gold Dishwasher about 8 months ago. Immediately called for service as dishes did not clean after running over 3 hrs. Was told it is operating as designed. I followed all the tips and it still continues to not clean. Plastic wear and cups stay wet, plates arent clean. We have changed detergents pods as well. We may junk it and buy something else. Recently purchased clothes washer and did not buy Whirlpool. Very, very disappointed. I should have kept my 12 yr. old GE Dishwasher that wasted water... But cleaned my dishes. Not happy with Whirlpool!

We purchased our brand new home ten years ago and we were thrilled it had a double wall oven unit that I had always dreamed of owning. Well, the first time I used the self-cleaning mode that dream became a nightmare! The oven was in cleaning mode and I was so happy as I had never had a self-cleaner before! When the cleaning was done, the door remained locked and the control panel was not working. After making sure it was cooled the next day, I called for warranty repair. They came out and fixed it and apologized for the inconvenience. I was thinking it was just a glitch and went on with life. Due to my husband’s business, we only live in the house part time as we do extensive traveling. My children are grown, so my cooking is mainly holidays and birthdays when we all get together. Since it is used so seldom, the need to clean is not as often as others might be. The next two times I cleaned it the same thing happened. The third time they came out they informed me that it was getting too hot in the cleaning mode and the steam was going into the computer panel and melting the electrical wire. They also said I would no longer be under warranty and from now on it would be my issue. The next two times I cleaned the oven, I did so the old fashioned way and skipped the self-cleaning. This week my oven started beeping and giving me a code and will not work. I called my trusted repair man and this is what I learned. The computer board is probably toasted. They no longer make the board, so he will have to send it out to be rebuilt. This will take 10 to 14 days and the cost will be somewhere in the neighborhood of $650.00! Are you kidding me?! How is this my issue? I have checked faithfully every few months, assuming that others are having the same issues, and that Whirlpool would be doing the right thing and recalling these ovens. Stupid me! This last time I had not even used the oven in three days and it still went out? I am old enough to remember when the first place you went to look for appliances was Whirlpool because they were good, they lasted and the company stood behind them. Oh, how the mighty have fallen. From now on they will be the last place I look! I’m not sure what is going to happen, but I can assure you I am not spending $650 to repair this piece of crap!

Purchased double range ovens. Enamel is flaking off within 2 years. Whirlpool denies defect. They wont replace it. Any other folks with similar problems? What can I do to have it replaced? I remember the old ovens and how the enamel just stayed and stayed and stayed. Never a rust or flaking issue in those old time models. Any expertise on how the enameling process may be compromised in the newer manufacturing process (cutting corners or costs). Any options for a class action here if a commonly experienced occurrence? If similar experience drops comments/review below as a one liner - just state enamel defect. That way can figure out the number of folks with issues. Id like to take action if given the opportunity, and more so if this is a common occurrence. Lawyers are costly for one-off complaints, but there is power in numbers (think United Airlines).

It works extremely well. My wife and I have had it for several several years and no problems with it and it cleans the dishes very well. We really like the silverware holder. The right size for a family. Recommend it to anyone.

I purchased a replacement gas range (whirlpool) approximately 3 years ago. Its not the top of the line, no bells or whistles such as a self-cleaning oven or such. I did love the three huge grates on top, one which is interchangeable with a flat grill. If it only worked it would be a decent range. The center oblong burner struggled to ignite in full from the beginning. Often, I light the thing with a grill lighter. But the thing that pisses me off more than anything is the F2 error that appears 70% of the time on the control panel when I am preheating the freaking oven. I am NOT replacing the control panel on a $400.00 range. What I have discovered is I can hit off my power at the main, not once, but 2-3xs and reset or over ride the damn thing. I read this F2 code is a common occurrence so I got to thinking, why? My conclusion is the heat from the oven is vented up & directly on the control board panel. Really now, whos bright idea was it to expose a control board to repeated temps of 350+? Hate this appliance. Next range will NOT be a new one, Im looking to replace this junk with something mom or grandma had that lasted decades, not a couple years. Shame on you Whirlpool for producing such low quality, disposable products. By the way, I just went through this with a new fridge so theres much to be desired with new appliances. Theyre junk, designed to fail.