Purchased my Whirlpool Duet front load washer WFW9150WW00 new in 2010. Also purchased extended warranty. After four years, just before my extended warranty was up, the entire inside needed replacing (drums, bearings). Now at only five years old, it keeps making a beeping noise in middle of wash cycle and wont continue working. Serviceman was told by a Whirlpool tech. that it could be two things, one being the door jamb, the other being the control panel. Door jamb was fine. Ordered new control panel ($240), had it installed and yet the washing machine still keeps beeping and doing the same thing. The serviceman doesnt know what else it could be. So, I am forced to return the part and purchase a new washing machine. I would never recommend Whirlpool to anyone!

I purchased my Whirlpool gas range about 5 yrs ago as brand new. Two and a half years after purchase, I started getting the F2 error and always had to pull the breaker to stop the oven. Whirlpool would not do a thing, they wouldnt even listen to me. So I bought a new control panel. Now once again here it is the holidays and Ive started getting the F2 error when I try to use the oven. So needless to say this is my last Whirlpool appliance. And the Service Officer wont even listen to me when I say I have to buy a new oven.

My husband and I purchased a Whirlpool Washing Machine & Dryer a year and a half ago. As of current, the machine has stopped working. The machine will turn on but will not agitate. It makes a horrible grinding noise. The type of washer we purchased was a WTW4900BW0. Whirlpool told us we should have purchased the extended warranty. But, I feel we should get more than a year and a half out of a machine that cost $650.

New whirlpool washing machine 2016 - This washer is supposed to be smart, but it NEVER fills up with water! I always have to fill a bucket with water and throw it in the washing machine. My clothes do not come out smelling fresh and its not the detergent to blame, its the washer! Im so disappointed with this product. Whirlpool should stop making products.

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

I purchased this dishwasher (whirlpool WDF330PAHW2) in February 2019. Really worked great until May 2020. Now doesnt drain on the last cycle, smells bad (even though cleaned) and door leaks under handle on front. Really too bad. I have been a Whirlpool champion for 25 years. Now not so much.

I have purchased a Whirlpool Washing Machine Mode W/P WM ROY 6212SD(31089) Sl.No.INF 153400517) GRAY/CHR TN 6.5 on 05.12.2015 with two years warranty on complete washing machine. The warranty period over on 04.12.2017. Exactly after over 3 months the machine start giving noise and we had been in touch Whirlpool and registered the complaint during last week of March 2018 and their local service center people visited, charged Rs.500/- service charge and informed that the machine to be taken to their service center to ascertain the complaint. After over a week informed that the machine complaints of Tub Support, Seal, Bearing, Drive etc. and the estimate is Rs.5,900/- including transportation (hardly 6 kms). The machine cost was only Rs.16,900/- then. I am surprised to know that just after 3 months of expiration of warranty the machine went wrong and the cost or repair costs me Rs.5,900/- is very huge. I hope the concerned will examine this.

This Whirlpool Gas oven with 5 burner top is very good and has given us 12 years of good service so far. The only issue is that the stovetop and oven are not easy to clean and keep clean. The finish is good and has no chips. I would expect the top to be easier to clean and keep clean with the finish technologies available. Same for the oven window glass - it is not easy to clean and keep clean.

This machine does not clean the clothes well, keeps an odor even after using Clorox (probably due to water inside that never leaves), and does not spin the clothes well. Every washing is longer than traditional washers and then I must use the spin-only cycle twice (adding another 30 minutes). I must also shake the inside of the tub to get the spin to work at all. The tech came out and re-calibrated, but to no advantage. Terrible machine and should be, as one viewer said, under recall, in my opinion. NOT WORTH THE MONEY -- and I am very disappointed in Whirlpool.

Was weary due to not a name associated with furnaces, but we installed a 100,000 Btu unit 2 stage and have not had any issues thus far.

I purchased my Whirlpool Duet Steam Washer and Dryer 4 years ago. My laundry never had that moldy smell. I paid for the set almost $2,900.00! Never again Whirlpool for sure!!!

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

Hello. We bought this refrigerator from Costco, so we can have extended one year warranty for the appliance. When we need this then we are not getting help. Our Fridge is not working from last couple of weeks. Technician came a day late to see the fridge, then order the part on the 01/03/2017, I didnt hear back from service provider till 01/11/2017. Finally I got a callback after spend an hour on the phone saying that it will take one more week. I had to call Whirlpool to expedite service and because of weekend I have to wait another 4 days to get the part.There are 7 people living in my house including 2 yr old. We are having hard time with the food and waste of food. We probably throw away $200 worth of food. And spending money every single day on food. I have to buy every other day for my 2 yr old. Whenever I tried to call for compensation, I get transferred to different department. I am so tired with this kind of service. I would never buy any appliance from Costco or Never refer to anyone. Very very bad service.

I bought the Ikea dishwasher (model IUD8500BX1) in 2014. Because it’s from Ikea, it has 5 year warranty. I was using it daily, as I have a family of 5 and we cook and eat at home most days. I have called Whirlpool at least 4 times according to the repairman that was here today. Ive already had to replace the pump because it was holding up water. After which, mold started occurring in the washer. The technician who came out found 4 fault codes on the machine. He was prepared to replace sensors and the circuit board for the heater and the pump, since it likely had mold. But Whirlpool says the parts are functional therefore the replacement parts won’t fix it. He is not allowed to replace anything.Considering the mold is an after effect of the failure to drain, you would think they would fix the mold as well. A replacement dishwasher would be nice, but at least replacement of the internal plastic parts that I cant clean. Instead, they tell me to bleach wash it and run a cycle with bleach. Guess what, Ive already done that. And according to the technician hes never seen a dishwasher have this much mold when it’s used as often as I use it. If you are buying this product thinking they will stand by their product, think again.

I bought a model (W10632082 A) dishwasher, and the top shelf is very flimsy, the dishes and glasses do not get clean, even after I fully removing any food soil from them. The dryer does not work. The dishes come out wet and with water spots. It is very noisy, and the water cycles are programmed to run upwards to three hours!!! The basket for the silverware is designed to be hung on the door, this basket falls off easy, and you cant use the left side because the normal size of the spoons or forks, get in the way of the dish washing soap reservoir, making it difficult to close the door. Do not buy this product. Horrible!!!

Its a great machine but the temperature control button is easily moved at times. The machine does a great job in washing clothes. Ive had mine for 10 years now and hope that I never have to replace it.

We relied on consumer reports as the primary source for a recommendation on this washer. Just under two years old, it started making a noise, which suddenly went away. Then one day the machine would not spin and drain, and we could not decipher the error code into anything useful. I turned the machine over to find that the drive belt was half-on/half off the pulley on the drive motor. This caused the belt to ride against the belt guard and wear right through it. I removed the belt and determined that the cause of the problem was that the large pulley on the drum was loose. For some reason the nut which holds that pulley on was slightly loose, causing the pulley to wobble. Not sure why they didnt use some Loctite on that nut. I put everything back together and tightened the nut. No problems and I checked it a month later, everything was still good. Fast forward to last week, when the machine was not yet 3 years old. Same thing, washer would not spin and drain. Tipped machine over to find that the belt had fallen off, the drum pulley was again loose. But this time the belt had damaged the pulley on the motor. I figured, no problem, just order a new pulley. Well you can buy just the pulley on the drum, but the pulley on the motor is part of the motor, it cannot be ordered by itself. The cheapest I could find the motor online was $250. We decided to cut our losses and buy a new machine. We will NEVER buy another Whirlpool appliance (or anyone elses by the same manufacturer, i.e. Maytag). Our last Kenmore washer lasted 23 years. Oh but it had an agitator and wasnt listed as HE (High Efficiency), so I suppose the environmentalists would get the dry heaves thinking about the impact of that washer on the environment. But it was useful for 23 years. Now this High Efficiency Whirlpool is headed for the recycling pile. Sorry, I think this hurts the environment more than an appliance which just works year after year. Yep, they took a design that worked and now we have energy/water efficient washers that dont last very long and are so expensive to repair that the solution is to just buy a new one.

My appliance is less than two years old, and it wont stop heating. I have to manually turn it up and down to heat water, which seems strange, since most or all of the complaints are because it wont stay lit. Mine stays lit (knock on wood). It wont shut off. A new thermostat costs $60.00 after two years? Please.

Whirlpool Gold Refrigerator, #GI6FDRXXY07 ICE MAKER PROBLEM - Ever since we bought this ref in 2012, we have been facing problems one after the other. First the refrigerator was shutting off on itself thawing the food the ref & freezer. (When we were on vacation, in summer of 2012 , it was a disaster when we returned home.) This a continuous on going problem... not fixed. Second 2012 Spring the Icemaker shuts off spilling water at the dispenser, when called customer service they sent a technician who replaced the ice maker. But again the icemaker is spilling water or leaking now. Third 2013 Winter, the bottom freezer was leaking and ice buildup at bottom. We have been having problems ever since we got this. WHIRLPOOL YOU HAVE DISAPPOINTED US, its been an exasperating experience. Please Help, its not our fault for your poor design & faulty product.

Bought brand new, Whirlpool front load washer and dryer, from Corbeil. Got both items home and connected and levelled (yes I took out the shipping bolts). Did my first washing and watched my new washer dance across the floor. Called Corbeil and they told me no refunds. Best they could do was to send out a Tech to check it. Tech came, changed the shock absorbers, a token act because the machine danced as much as it did before. Please for your own well being DO NOT buy this product and DO NOT buy from Corbeil. There are other products on the market that advertise items that dont shake.

I have a washer, dryer, dishwasher, hood vent, stove top, and oven, all Whirlpool. I cant say enough how pleased I am with this product. My old washer and dryer was over 23 years old when I needed to replace them. Thank you Whirlpool for making such a quality product.

We purchased a Whirlpool Cabrio washing machine on 3-18-16. In February of 2017 the washer died. I was bleaching my whites at the time so most of the clothes, whites fell apart because they sat in bleach and water for 2 days. I had to figure out how to get them out without getting bleach and water all over my clothes. I called whirlpool and they got someone to come fix it. The tech came and said we needed a new control panel. We waited 3 weeks for the panel. He came on 3-24-17. He put the part in. Took less than 10 min and said, All set. I went downstairs and put a few things in. I was a bit leery and the machine started. I went back upstairs and I hear beeping. I go back down and the machine is flashing again. I called the repair people they said, Unplug it for 10 min. It may reset itself. If it doesnt, call back. It didnt. I called back and wanted me to wait till the following week. I told her I had clothes in there.Someone came the next morning and said it needed a harness and they would order it. Well its the 28th and I havent heard anything. I have called whirlpool several times with no satisfaction. We had the machine less than a year and its been dead for 2 months. I am disabled. I have multiple sclerosis so every day is a new issue. I hate to put that in here but I want you to know what Im dealing with along with a dead washer. Any help you can offer would be appreciated.

This unit was new 11/11. Very little oven use but the 1st time the self clean feature was used the outer oven door shattered and now 5 years later there are no replacement parts available. Bought an extended warranty and no results from vendor other than refund $$ on what is left of warranty. Original cost $3200, now useless p.o.s. I will never buy a product manufactured by Whirlpool and hope they go out of business. Bitter... You damn right...

Whirlpool Cabrio washer Model WTW6500WW1 Ser C02670098 Type 580 is the worst appliance I have ever had. All the bad comments from people are all true! The washer leaves clothes wet. I get F1 error code or it just locks up and I have to unplug it and plug in again, twists clothes up and doesnt get clothes clean. I have always bought Whirlpool appliances because they were good but this washer has changed my mind about Whirlpool.

Whirlpool 500galaxy gas water heater - First week ran great. Now Im lighting every day. Called Whirlpool and just getting run around. Had it a month today, still lighting every day. Cant afford to buy another.

I have a Whirlpool double oven. When I attempted to use the self-clean feature according to manufacture instruction, the bottom oven stopped cleaning in the middle of the cycle. I had a repairman out and he replaced the thermal fuse in the back of the oven. It cost $85. I didnt attempt to clean it again for another few months since I dont use the bottom oven often. When I did attempt to use the self-clean feature according to manufacture instruction, the same thing happened. I called the repairman and he said that the thermal fuse would blow every time I tried to clean the oven, because of the way the oven was manufactured. I contacted Whirlpool and they were not at all helpful. I intend to contact them again.

The drawer guides on the large clear drawer at the top of the whirlpool refrigerator are very flimsy causing the drawer to drop when pulled out to the stop. When I called about this I was told it was cosmetic and not covered under warranty. I purchased the extended warranty which will replace the flimsy parts with the same flimsy parts. On 6/24/2024 Denisia sent me new side rails, exactly the type I have. I replaced them but the right side one broke. I regret ever owning one and will not recommend a whirlpool product to anyone. It is very obvious to anyone, after using this product, that that particular part is not safe and is definitely more than a cosmetic problem. I have already dumped the contents on the floor once and have just managed to catch it more times than I care to count. I spoke with Danielle on 5/14/2014. She sent the small plastic drawer that goes on the bottom.

Just purchased Whirlpool top load large capacity washing machine with no agitator at Lowe’s three months ago. I sit at the kitchen table in my freshly washed exercise clothes and smell body odor. There were six exercise items in the load and supposedly enough soap. The load washed for 45 minutes last evening. Yard work clothes washed yesterday are not clean. I had to remove grass from the bottom of the tub. When I iron my smocks for work, since I work with animals, I pick pet hair off of them as I iron. Judging from other reviews, this torture won’t last long, before I need to replace this piece of junk. My last washer lasted 20 years. If it didnt leak water, it would still be running. Thanks Whirlpool, I guess the joke is on me!

I bought a new Whirlpool refrigerator from Sears and within a month the refrigerator side did not maintain temperature where milk would not spoil... Cool but never cold. I called Sears and they said its Whirlpool warranty to contact them. This I did and about a week later they contacted a local service company they use to maintain their equipment... Long story short this will be the 4th time they were informed the refrigerator still doesnt maintain temperature... Food had to be thrown out because of that.I asked them to refund me my cost or at minimum get a working refrigerator to me because after 4 attempts at trying to fix the problem it still exists... They just want to keep sending a repairman out there who still cant figure out the problem and that has cost me much time away from work not the mention the spoiled food costs... Even when complaining my dilemma to the repairman he said, All they will do is keep calling us and kick the can down the road... They could care less about what it has cost me in time and money... I had to give 1 star to this company but they dont deserve even that one... Dont waste you time thinking a warranty by them is worth a flip and now over 3 months Im without a refrigerator...

So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.

I bought my home four years ago with a Whirlpool 50-gallon water heater in it. It was installed in December 2002. Well, my hot water went out. After being told I could go to Lowe’s because they would supply the part free of charge because there was a recall on the thermocouple unit. I went to Lowes. No luck there. They told me they didnt carry the whole replacement unit and I would need a number from Whirlpool. The guy at Lowes was very nice but said I was the fifth person to come in this week.I called Whirlpool and was told because I was not the homeowner that had purchased the item that there was no warranty on the product and that I would have to pay for the part. It cost $34.98 plus shipping, which was another $30.00 because I had it shipped overnight. Two days with no hot water was enough. Well, I got the part and hopefully there is nothing wrong with it as it was shipped in a box twice as big as needed with no packing what so ever.I just got off the phone with them again but this time spoke with a supervisor that told me there was no need for packing. There was no part of the entire assembly that could have been damaged. Will I ever buy anything with the Whirlpool name on it? Not only no, but ** no! Will I tell everyone I know about this? You bet. I am also going to write to Lowes and ask why they are continuing to sell inferior appliances such as these. I have to tell one realtor friend about this and just placed a call to another to tell him. The first had no idea that appliances that were marked still under warranty did in fact have no warranty at all if its a Whirlpool. I may write a letter to the editor of our local newspaper and hope that they will publish it to inform anyone reading the paper about these inferior products.

This washer is poorly designed. Less then one year old and always has problems. I dont feel it cleans the closes. Does not always spin them. The load and go is a joke - had a service call because it would lock up - was told load and go does not work and not to use it - the washer was only a few months old. Now it will not even turn on!!!! - All other appliances work in the outlet - it does not respond. I will not even wash by good clothes in it - I take them to my daughters Samsung. I am in my sixtys and this is the worse washer I have ever owned, DO NOT PURCHASE.

Whirlpool cabrio top loader is junk from the first month. My washer has had way too many repairs. A&E repair has been a frequent at my home. Now Im getting ready to repair it again! Hub gasket or pump not sure this time. All has been replaced previously. Never ending - always something wrong with it!!!

I have been without a washing machine for 3 weeks because my 4-month old washing machine does not work. I have had a repairman out 3 times and now one of the parts that he may need because unfortunately, its not an exact science is on back order. I have spoken twice to supervisors at Whirlpool and have gotten nowhere with them. They are trying to locate the part that is on backorder and my warranty is for repair and replacement parts only. By the time they get through with fixing this lemon, if it ever gets fixed, it will cost more than just replacing the machine! I have 5 people I am doing laundry for and a trip to the laundry mat every week is not something I can afford nor is taking time off of my job every week to meet with a repairman to try and guess what the machine is needing now. After 4 months, I should not have to even be concerned with what is and isnt covered by my warranty! My last washer/dryer lasted 12-15 years with very little ever going wrong with it. I will never recommend Whirlpool products or buy Whirlpool products again, not because something has gone wrong with the product, things like this happen, but because Whirlpool is very poor when it comes to customer satisfaction and treating their customers right. With this day and age of social networking and this economy, you would think that Whirlpool would do more to treat their customers right and build a product that lasts longer than 4 months. When I asked to talk to someone other than the supervisor I was given, I was told that she is the top person. Really? I find it hard to believe that there is no one above her that I could talk with to express my frustration and request that something be done about this problem.

I feel that at the end of the day I do owe Whirlpool a good feedback. Our top load washer stopped rinsing so I checked the clutch, agitator dogs and coupler which all looked brand new. So I thought Id take the trans apart and after pulling the plastic agitator out I noticed the tub had completely rusted in half! The tub dropped down about an inch. The agitator would spin but the tub just sat there. Now came the difficult part. I told them I was quite sure about my diagnostic that it needed a new tub and told them I could send them a video (I even posted a video on Facebook and Twitter). But they said they would have to send a man out at $180 to make sure! After several days of back and forth conversations, someone at Whirlpool finally saw the video and agreed to send us a new tub. I havent gotten it yet but have heard through the grapevine that these tubs were supposed to be replaced if rusted because of the quality of metal used? So other than pulling a few teeth and needing to replace the tub, our washer has been a pretty good machine.

This washer is going back. It simply will not spin the water out of the clothes. It says it gets clothes drier than a conventional washer, but I have not found that to be true. I have to use the drain/spin cycle over and over and still the clothes are wet. I had the repair crew out and they were able to get it to spin out a very small load consisting of two sheets and two towels. Other than that, it does not spin out water. It is also very difficult to load if you attempt to leave the center open as they recommend. The cycles are very long. Not being able to look inside without pausing it and waiting for it to unlock is also a huge hassle. I am getting one with a glass top so I can see what is going on. If you leave it open for too long, it cancels the cycle and drains all the water, and you have to start over which is another problem because all your detergent just got drained out before the load gets going. It uses so little water on most of the cycles that the clothes get totally tangled up with one another. I think you should be able to choose the water level manually. I am all for saving water but if I want more water from time to time, this does not allow you to do that. I DO NOT RECOMMEND!

The dishwasher racks in Whirlpool/Amana/Kitchen Aid/Maytag dishwashers do not last as long as the dishwasher does. The vinyl coating on the cheap metal tines wears off causing the metal underneath to corrode and rust. This rust will deposit on your flatware, stainless or otherwise. When the vinyl coating wears away at the base of the tines, the tines will break off, creating more opportunity for rust to deposit onto flatware. You can purchase new tips for the end of the tines, and more vinyl to paint onto the tines, but you cannot replace the tines themselves or paint the vinyl onto any rusty surfaces.Another option would be to buy a new rack. A new bottom rack costs almost half of what a new dishwasher costs and if you need both top and bottom racks, you will pay almost $400 for the pair. Whirlpool was not amenable to negotiating a better price on the racks, but they would sell me a new model at a price that was close to what it would cost to replace both racks! Now does that make sense? Does it make sense for appliance companies to cause consumers to have to throw out an entire appliance rather than fix it? No, and it is creating more waste and filling more landfills. My dishwasher has run great for 7 years and I refuse to buy into the rack racket! No more Whirlpool for me!

Similar to what I am reading below and on other sites, my hot water heater stopped working. I spent about an hour trying to relight the pilot light, which apparently you cant do with this model because it breaks. My first thought and action was to call a plumber to come fix it. When he arrived he said it was reverse thread and that I would have to call Lowes to get a replacement part. When I called Lowes they said they would call Whirlpool and then give me a call back. Two days later I still havent heard back or taken a shower; I am going to the gym tonight. Finally, I got online and called the 800-number and am being sent a part to arrive tomorrow. I asked to be reimbursed for the cost of the plumber since they obviously knew they had a problem (they assumed why I was calling the warranty line) and redesigned the issue with a voluntary recall. Whirlpool, please make this right. I know you license your name to American but it is still your name and brand reputation.

The washer works well for the age of it. However, I would say it is not designed as nicely as some of the others I have seen. I found it performed okay doing the wash, but it didnt hold up as well I as I would have liked. Seems cheaply made. The machines plastic parts have stained from rust and seem tinny.

I have clothes that are coming out torn with large holes, especially cotton items. I dont know if it is the washer or dryer.

Purchased a Gold Series Whirlpool dishwasher, Mo. No. WDT720PADW2, From Maruszcak in Schererville, In. on 1-29-16. Approximately a year later door was replaced by Whirlpool because of paint problem due to faulty design. Replaced door is now peeling and rusting by exhaust vent also. Contacted Whirlpool and they will do nothing more. They said it was a favor the first time they replaced the door. They feel this is a cosmetic problem! I paid a total of $675.03, Their repairman would charge a $100.00 to look at it and another $235.00 for a new door. I feel this is a design problem and they should replace it with a new model, a refund would be better. Very unlikey, because Whirlpool does not stand behind their products. The line also includes Maytag, Jenn-Air, Amana and Hot Point. Besides this I have found plastic pieces that have fallen off! I had to use plastic ties to keep them in place. Dishwasher does not clean well. Have to rinse everything first. Products are bad, stay away from them!

I bought the french door refrigerator Sept 2014. Recently the change filter light came on so I bought the filter. I read the instructions and then when I went to install it, the filter door would only open about 10%. I called Whirlpool and explained it was obviously a manufacturing error. They didnt care. Out of warranty. Everyone can make a mistake but when you wont own up to it and take care of it, that defines your character or lack of it. I think I will video the whole thing and put it on YouTube.

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

What happened to the Whirlpool Corporation that we grew up with? I purchased a Cabrio Washer on 8-29-11. Here it is, 4-24-13 and the transmission is shot. Two loads of clothes were ruined and sensors went bad. All in all, over $500 to repair it. I called the customer service line, what a joke - bad product and worse customer service. Not even and Im sorry. Well it is out from under warranty and when I buy something, I research it first, she said. Wow! Thanks Reena for all your care and concern. I dont know if Ill ever buy Whirlpool again.

We purchased this washer in 2017, its the top loading Cabrio washer and it has been nothing but junk since day one. Purchased from RC Wiley in Boise and unfortunately did not buy the extended warranty because we trusted that this American company would make a washer that would last longer than 3 yrs. This washer barely washes clothes, leaves a residue on them since there is no agitator, also constantly gets unbalanced or gives and error of LF which means water supply issue when there isnt one. My 15 yr old about has a heart attack when he uses the quick setting and his clothes arent done in an hour and a half. Ive even resorted to turning the thing on to just rinse and spin so things get done sooner, still the stupid washer just sits. I would sell it but I dont want to pass on the pain, so its going to the dump to or to Goodwill cause its not worth the headache. Too bad you cant trust an American company to make a good product. Sad I really wanted to like this washer.

I purchased the Whirlpool Cabrio Washer thinking I was purchasing a quality product. Unfortunately it was one of the worst decision my wife and I have made. The bearings (lower) only last about 2 years. We purchased the extended warranty and the first time it was covered. The second set were not covered and now we will have to change them again. We will not ever purchase another Whirlpool product. I contacted them several times with no positive results. I still saved the last worn out bearings to show the CEO. The engineers do not have a very good idea to make the lower bearing last. Where I purchased the machine they told me after the first change that it would happen again and they were correct. If anyone needs to contact me about this product feel free. NEVER EVER BUY A WHIRLPOOL PRODUCT.

I’ve found many years of flawless performance from many Whirlpool Appliances! Once they are 20+ yrs old, I tolerate their aging and repair issues if they occur. My current microwave oven is 10 years old and was removed for a kitchen remodel, replaced after remodel and hasn’t skipped a beat!

We purchased a Whirlpool Cabrio Washer in 2010. I have had nothing but problems trying to wash black/dark clothes, it leaves white stuff. I assume its soap scum all over the clothes. Ive tried cleaning the machine with Refresh more often than recommended and it still has the same problem.

I have a Whirlpool stove. Theres nothing but problems with the oven sensor. This is the 3rd time we have to replace it. It had problems ever since I bought and thats been 11 years ago. My Magic Chef lasted 13 years with no problems. I have a Whirlpool microwave that had a recall on it. Never buy Whirlpool!

The dryer lint screen is located at the door base. This is placed incorrectly, in that if you have any lint on screen it attaches to wet clothes. The screen should be located at top of dryer for a less messy clean up process and away from your clothing.

Purchased Refrigerator (WhirlPool Refrigerator WRX988SIBM03) 16 months ago and noticed the drawer with glass that house the drawers had a crack on the right side. Couldnt believe it was cracked after such little use with just two adults living in the home. Removed it and noticed this was such shoddy design. There is a heavy metal bar in the back with a piece of flimsy plastic that attaches to the heavy metal bar with only a screw attaching the plastic to the metal.I made attempt to glue it since it was only cracked but then the plastic just started crumbling into pieces like a broken cookie. Truly there is something wrong with the quality of the product as well as the design of having this heavy metal bar attached to this flimsy plastic. The quality of this part only leads me to believe what is next with this refrigerator. I am sure there is more to come.I contacted Whirlpool to see if they would replace but of course this is at my cost. Ive had inner parts of refrigerators break over years of use and they get old and busted up over time but this is a new refrigerator and once I inspected the part, I was disappointed with myself for not removing these inner parts and inspecting prior to purchasing. I would have picked up on the poor quality right away. Taken by the outside of this unit and its beauty, and not truly looking at whether or not the shelf can hold a couple gallons of milk. I am here to tell you there is no way this would have withstood the test of time with only a gallon of milk sitting on this unit. Poor design, poor quality and metal attached to raw plastic as it is a disaster.

This machine is junk. It does not get clothes clean. I had jeans that I soaked and were fairly clean when I put them into wash and had another pair of jeans with a little dried mud. My whole load came out filthy. I am having to rewash the whole load after hand cleaning the washing machine. I replaced a machine that was 25 years old that did a better job than this piece of junk now sitting on its place.

I have a Whirlpool Cabrio washer and dryer combo. Recently, I have learned that the washer has a very common problem with the water pump. I have read amazing amount of complaints about this problem and apparently the company has nothing to say about this. The cost for parts and labor for replacing this pump is about $400.00, almost half the cost of the unit. This is unreal!

Please do yourself a favor and stay away from both Whirlpool and this unit. I purchased it from a local dealership and paid $881.00 which included tax and delivery cost. In less than 2 years, it broke. Whirlpool does not offer a warranty on the unit. After having a Whirlpool repair person come out for a cost of $75.00, I was informed that the parts to replace would cost $800.00 not counting additional labor cost which was TBD. I contacted Whirlpool and went from Agent (Phylicia) to supervisor (Ashley) to Manager (Carol **). The best offer I was given was to buy the parts at a discount of $400.00 which did not include tax, delivery or labor. So it would have run approx. $550.00 to over $600.00 to fix a $771.00 washer.My next letter is to Jeff Fettig (553 Benson Rd, Benton Harbor, MI 49022/ CIO of Whirlpool) to let him know how impressed I am with his product and customer service support. The next Whirlpool item I buy will be never. Take this as a word of warning to go Maytag or any other vendor because Whirlpool will not support you once the sale has been completed. Good Luck.

A little over one year ago, I bought this model from Lowes. Shortly after installation, the ceramic coating on the floor of the bottom oven cracked and shattered. I contacted Lowes... No help whatsoever. I then fought with Whirlpool for weeks until they agreed to replace the unit. Seven months later, the floor of the bottom oven, once again, cracked and shattered. I am now in another dogfight with Whirlpool. This appliance is garbage and Whirlpool does not stand by their product. Do not buy any Double Ovens from Whirlpool. My next step is to organize a class action lawsuit.

We purchased a new Whirlpool washer in March 2010. Yesterday, 2/19/12, the washer stopped working. We called a repairman who checked the machine and told us the motor needs to be replaced. We called Whirlpool today, 2/20/12, and were told by their customer service department that since we did not have an extended warranty. We told them that we believe the motor should last more than 2 years. Their response was that if the motor lasted more than a year that was all they cared about. The only thing they would do is replace the motor if we gave them $299.00. I think it is very clear that Whirlpool knows it makes inferior products as they fail to stand behind what they make. I will never buy another Whirlpool product and would advise anyone who is looking for a washer to buy something other than Whirlpool.

The electric Whirlpool double oven range seemed like a good choice for a single person. I bought it in 2016 around the same time I had some personal setbacks. After finding my emotional equilibrium I decided to return to my much loved baking. While I have no other complaints on this range the ovens are a problem for baking. The digital oven temperature readout doesnt reflect temperature fluctuations in the ovens. Once you enter your desired baking temp the readout never changes even after you open and close the oven door say to take out cookies. Given some of my poor results I suspect even when Im not opening and closing the oven door the temperature is not maintained. I was going to get an oven thermometer but the user manual says it wont reflect an accurate temperature due to way the elements cycle to provide a consistent temperature. Ha! If you want to bake this is not the range for you. My inconsistent results and too often wasted ingredients frustrate me no end.

Our Duet Whirlpool washing machine is less than 3 years old. It would not always turn on when we would start it, or it would start and then it would give me an F70 error. If we pushed the start button again, it would continue to go through the wash cycle. There was nothing in the manual about that error. I called the service department and they could not tell me what an F70 error was either. The service department wanted to schedule a service call right away and offered me an extended warranty for $345.00, for one year. Since it was less than 3 years, and it didnt seem too serious (since the wash cycle would complete after pushing start again), I figured that it wouldnt be that much of a repair bill, so I declined. Also, I might add, that my previous 25 year old washer had only had one repair bill for a total of $200.00.When the service tech left, he handed me a repair bill for $741.00! I nearly fainted! He put in a new board. I immediately called the service department back and they said, Sorry, the extended warranty was a one-time offer and no assistance was offered when I asked. I could have bought a brand new washing machine for that price. Bottom line is, I would not buy a Whirlpool appliance again, and I would never contact Whirlpool for a problem. I would contact someone local. Had I known that a repair bill could have remotely cost over $300.00 on a new washing machine, I would have waited until it completely died and then bought a new one, and not a Whirlpool!

Whirlpool WFE720H0AS0 - I tried to use the self cleaning oven feature and it cleaned the bottom of the stove but did nothing for the sides, back and door of stove. The top of the stove is impossible to keep clean. Maintaining this appliance is a full-time job. Very bad choice.

We brought this in Jun 2015, within 1 weeks it developed its problems. Ive had service men out 10 times for ice buildup on the freezer side, and the refrigerator side not cold even on max setting, and the problem hasnt been solved yet.

Overall the stove works well but it is horrible to clean. You have to use a lot of muscle to get the spills up from around the burners. It is hard to get around the burners to get all the spots off. The gas burners work well & cook evenly.

Whirlpool Energy Saver Dishwasher Model DU850SWPS3 was placed in our new home purchased in May of 2010. We just found that this dishwasher had a slow leak in the seal to the motor which has ruined our hardwood floor, subflooring and part of a laminate beam on the floor directly below the washer, plus molding from the water. The leak has been going on sometime it was not noticed until the floor became so soaked from use over a long period of time that we finally saw the leak, by accident, in the basement which we hardly access. The Whirlpool costumer service was no help and would not entertain repairing the dishwasher unless we paid due to the fact it is over the year warranty. This is clearly a defective part in their product and poor workmanship on their part. We should not have to check underneath our new appliances to determine if we have leaking problems because we cannot trust them from failing. I will never purchase another Whirlpool product and will not recommend their products to anyone.

Whirlpool Cabrio Platinum Washer - The seal on the top of the drum is breaking down. It is cracking at the bleach and soap dispenser. Somewhere in the washer drum or plate is causing holes and cuts in the clothes. The machine is only 2 years old.

lD and UL codes are displaying. The UL code displays when the load is even and also displays UL load when I take all clothes out of washer. How could the load be uneven if there are no clothes in? I have had four different issues with this washer. I have started use on this washer in Aug. 2008 and there have been already three major repairs. I am a very dissatisfied customer. I dont know if I should spend more money on washer repairs or just buy a new washer. Please help.

We purchase a washer and dryer from Lowes in 2012 and a couple months ago I begin to notice that the Clorox and the softener draining spout is not working. The Clorox side is full of water, and the softener half of the time dont even drain all the way and not happy with that. The washer is beginning to rust on the inside by the dispensers, the lid area and the outside panels. I should have purchase GE. I would not recommend this brand to anyone.

The Whirpool refrigerator does exactly what its intended to do. It has no ice maker or water dispenser and thats just what I needed. But the plastic produce drawers do have some cracks because the quality of the plastic is not the best.

We purchased a Whirlpool Cabrio washer and dryer set in 2013. In 11 months we have made at least 6 calls concerning the same issues machine leaving white residue on clothes. It has been one thing after another. Today the manager told me that my warranty only covered parts and not a replacement machine. I am washing my clothes two or three times to get them so we can wear them. First this is not saving water, energy, time and most of all CLOTHES. We are wearing our clothes out washing them. This is unacceptable. With this many complaints, the company has to know they have a machine with issues. I will never purchase Whirlpool again. I think we should all band together and file an action against Whirlpool. These machine cost too much money to be crappy.

The unit I live in is at **. They purchased it in Nov 2011. The washing machine worked for 2 months. Now, it has to be dismantled at my home and take a day off. I would like a replacement. The Dutchgate is still being developed. They purchased at least 60 at this point, there is no reason not to give me a new one instead of having two techs dismantle the machine in my new home for 4 hours and a day off of work. Model WFC7500VWl, serial CD13528709. Please try to assist me.

Whirlpool fridge (model no ETILFKXKS) - I purchased this fridge from a very good dealer (Trail Appliances, Edmonton). Within a year, I had my first of the frozen water drain from top freezer to water pan. Of course, I blamed myself - too much warm food, blah blah. Now this is happening more and more often. The fridge is kept at number 1 of 5 for coldness. All foods are left on counter to cool, but three times over my Christmas holidays this year when I swore I would throw this fridge in the garbage - the drain froze, water all over the fridge, food having to be removed and placed in other peoples fridges, blah blah. Now it did it again this weekend! There are only two living here. I work all day and no one even opens the fridge much and again this happened. Im really sad that such a faulty product (too much insulation hiding the drain pipe behind the fridge and it must be much too small in diameter; otherwise, it wouldnt freeze up). Talking about work. We have two fridges there with 50 people using them all day and they run perfectly for the last 8 years that I have been there. So I think it indicates that my fridge is faulty. Im so sad too because I dont have the money for a new one. I just turned 65 and am about to retire (single mom). You would think that a $1,300 fridge would last longer than 6 years!

The Whirlpool washing machine came with our apartment. It is a top loader, which I like. The only difficulty is that no matter what I clean the interior with, I cannot seem to get it clean. It gets very dingy, even with HE detergents.

Purchased a Whirlpool microwave for new home in December 2013. Model WHM31017AW-1. This is the second time the heater element has to be replaced. Im starting to learn the warning signals: open door and then a short time later the microwave would die a sudden death. In my 20s I purchased for my house in Boca Raton Fl all Whirlpool products... they worked forever. Now not so much. In order to get this one fixed again, I had to get a service contract for $300 which would be cheaper than getting it fixed again, heating element $400 and service call another $100. Serious $300 service contract money too much for a senior citizen. Never will I buy another Whirlpool product as a result.

I have had this Cabrio washer and dryer for two years now and I would do better washing my things by hand. Save water, sure there is none!! I have a glass lid and I actually stood there and watched a cycle and the clothes on top never even got wet!! My whites are now gray!! Called the company to get nowhere. I am going to buy an old-fashioned washer that actually uses water. I tried to be eco-friendly but I dont like dirty clothes!!

Reading the many reviews of malfunctioning washers and other appliances, I wonder why organizations like Consumer Affairs and Consumer Reports do NOT help the many cheated customers form a class action lawsuit or boycott or some other means to effectively organize and force manufacturers to return the full cost of purchase, taxes, shipping, moving and repairs for 5 years for every product. The manufacturer have NO consequences for selling shoddy, malfunctioning but terribly expensive products. We are all being taken for fools by the corporations.I was stupidly brand loyal and bought a Whirlpool Duet front-load washer and dryer because we had to leave our perfectly good 28-yr-old Whirlpool washer when we sold our house. The first set of instruction is to pull the electric cord from a small hole in the back of the washer. No amount of pulling would budge the cord. Finally yanked with all my strength, heard a snapping sound and 12 of cord came out. Then no more pulling, yanking or tugging would produce another inch of cord. So I took off the top of the machine and found the cord tightly wedged in the fork of a plastic thing that looked like part of a stabilizer for the drum.A similar plastic thing on the other side was broken at the fork, the snapping sound I heard. Freed the cord with lots of effort, but it was still firmly stuck way down inside. Removed the back of the machine, found the cord stuck inside a circular thing with one tiny opening. Took lots of time and effort to free the cord from that, but it was still stuck. Finally managed to reach the plug, which was firmly anchored to the bottom of the frame with an orange lanyard. Cut the lanyard with a knife to finally free the cord. This had to be an act of sabotage by an assembly worker, as no way could the cord accidentally jam itself into 3 different places too small for the cord to slip in, and it certainly didnt tie itself to the bottom of the frame with a lanyard.The hour it took to free the cord was just the start of troubles with this machine. It did start and kind of tumbled clothes in an odd fashion, but when it went into spin cycle, it literally jumped all around the room, almost jumping out the door. The whole house shook and I feared the floor would collapse. That machine must weigh well over 100 lbs. even without water and clothes. Next load I tried delicate cycle which had a slow spin cycle.Same result, even worse. I had to wedge my body in the 10 space between washer and dryer and press down with all my 170 lbs. to keep the machine from doing serious damage to the dryer, walls and floor. I contacted seller, Lowes, and they said call Whirlpool. So I did, but no response. Before buying that machine, I read many horrible reviews of Whirlpool Duet machines, but I have only owned 2 washers since 1967, both Whirlpools, so I had strong but stupid brand loyalty.

I have purchased Protton 3 door (Protton 20142, S.N **) fridge in Mar 2016 and since purchase of the fridge I have facing cooling issue. Its take around 24 hours to make ice. After sales service is also pathetic because after raised request the service person came about 6 or 7 days later, and he did not check anything and recommend me to go to the service center. I am not sure why Whirlpool kept this type service person and service. My concern is if Whirlpool is not ready to provide home service then should mentioned in service commitment we dont provide home service. I am using first time Whirlpool product and I realized Whirlpool product are very bad and service is also too bad. I strongly recommend to everyone please dont buy the Whirlpool product and I also want to know either Whirlpool will provide service or this fridge product is useless for me.

I just purchased a brand new refrigerator from Whirpool and after 2 weeks been delivered I started having a lot of issues. They sent a technician twice to get it FIX but Im still having the same problem. And they dont want to replace the unit. They want to keep sending technicians to make the same repairs. Its a NIGHTMARE!! Please do yourself a big favor and buy a different brand. I dont recommend!! By the way this appliances are made in MEXICO!!

It took 5 deliveries to get a fridge that wasnt damaged. First two came from Leons - the same damage on both. Then they said we had to go through Whirlpool because so much time had lapsed. We had purchased the full set of Whirlpool Gold for our kitchen renovation; therefore, we were unable to unpack the fridge until the cabinets were completed. I phoned Whirlpool Canada, and they said they had to send a service tech. The service tech came, and he confirmed the damage and was told to patch it with a proxy. Sorry but I had just paid $1500 for a new fridge. I didnt want a dent and damage. We received no offer for discount to accept the damaged fridge. They sent another one, still damaged. They used their truck to deliver and the guy had no idea how smashed our brand-new trim.So Whirlpool sent another fridge, and even though I asked them to check it before sending, they didnt. It was damaged. This is four fridges. Im tired of fighting with Whirlpool. I called Leons, and they take care to get me a new fridge undamaged. I told Whirlpool about the damage, and they sent a form. First, they wanted me to claim on my house insurance. Why should I put on a claim? If not, get two quotes and fill out tons of paperwork. Im just too tired after fighting for over two months to get a fridge that isnt damaged. Not even an offer of compensation to cover all the time taken off work and the stress on me and my family. This is the second set of Whirlpool Gold we have purchased in the last 4 years. I doubt I will ever purchase again, because you are a company that doesnt treat your customers with respect or concern.

My fridge is over 10 years old and the compressor has not failed. I have replaced some of the bins that have cracked or been broken over the years. It is a side by side in black color and will probably replace it with another type but the same brand as long as it is economically feasible to do so.

I have the same lid closure issue expressed by many consumers and whirlpool refuses to acknowledge this as an issue, only recommends purchasing a new lid at $225. Lid design is flawed, metal L bracket connects to plastic housing/trim/side of lid, causing glass to pop out and stress cracks between screws. New models of same washer have redesigned lid, no cross reference part number or dimensions listed to determine if new lid will fit.

I call in to Customer Service to get someone to fix my washing machine because it wasnt working and when I called, I forgot to have my washing machine serial number at hand. The person on the other side told me that she cant wait for me to get the serial number more than 2 minutes and I ask myself, if they cant wait for me more than 2 minutes to get my serial number, then why should I wait a week to have someone fix my washing machine?

I have had our Whirlpool Cabrio washer and dryer (CU0771356 and MU0803512) for four years. Our trouble started when the machines were 14 months old. The numerous error codes have been fixed by replacing boards, the bearing has went out, and the entire tub has been replaced. The dryer has had two service calls for going out. Now, both are out again. The washer pump is bad and the dryer has stopped heating up. Where is the class action lawsuit?

I bought the stackable Whirlpool Duet. Piece of garbage (model # WFW9150WW). From day one the washer never worked. Error lights/bells kept going on before the second spin cycle. First repair guy couldnt figure it out. And the manual says just unplug and plug the power cable back in. Sure--every time I use it? I called Whirlpool service and they said a new control board was needed without even seeing the machine, which tells me this is a manufacturing flaw. I waited 2 months for the board. When it came, the repair guy put it in and then the machine would not stop filling. So another switch and hose are being ordered. Whirlpool customer service is completely useless. And no one will even discuss replacement. Now Im stuck. $700 out on the first machine and $200 on the extended warranty, which will be useless because Im going to dump the machine. And additional $800 on another new machine which probably wont work either. Oh, yeah, and you have to use special soap, which Ive tried, and got down to using only 1/2 a teaspoon because the suds never cleared. Please tell all your customers never to buy Whirlpool!

The machine is reliable, does not take forever to do a load, it is relatively quiet. It has sufficient options depending on the size of the load. Additional options are time setting, choice of warm, cold or warm/cold water settings. On light and medium loads it extracts almost all of the water; on heavier loads an extra dry spin does the job. In all the years that we have had it, it has required only one service call. The maintenance man told us that this model is the best in a series and he recommends that we hang on to it for as long as possible. We're very happy with it.

My Whirlpool gas hot water heater will not stay lit. The thermal coupling has been replaced by my plumber. It did not help. This tank is defective. The product details are as follows: model # FG1F4949S3NOV, product # B07330262, and serial # **.

Avoid Whirlpool at all cost. I have had the GSS series, which was horrible. It was declared unfixable by service after 2 weeks of ownership. It was replaced with a similar WP model WS series and was told it was basically identical to the GSS series except for some cosmetic differences (They do look identical and yes, it’s just as horrible as the GSS.). The first one was defective from day 1. It was replaced and assured the next one would be thoroughly checked out prior to delivery. Obviously, nobody did this (was still in box and never opened). The fridge arrived and had the same exact defects as the previous units. Service literally said these were junk and they had nothing but issues with them that they simply cannot fix, and issues Whirlpool is obviously aware of but will not admit to, nor back up their products. Service literally told me to avoid WP at all cost or I will have nothing but non-stop issues and non-stop service calls and the fridge will still not be fixed. I purchased the extended 5 year warranty that clearly states that the fridge will be fixed or replaced if deemed non-repairable. Mine was! Yet, neither Whirlpool nor the retailer will do anything. I was literally told Take it to the dump and go buy a new fridge by both Whirlpool and the retailer. My purchase was less than a year ago. The 3rd fridge has only been here 3 months. They took my $1,500. They took my money for the extended warranty. It has been declared non-repairable, yet Whirlpool’s and the retailer’s response is Too bad, we are keeping your money, not honoring the warranty. We don’t care if it’s non-repairable. Take it to the dump and buy a new one.This is new! The money it cost, the money for extended warranty, the money for lost food, the money for lost wages due to having to be here for repeated service calls, the huge amount of time spent using hair dryers and everything else under the sun (this fridge must be baby sat and monitored pretty much 24/7 due to more issues than I can list). The fact this fridge has taken over my life, with freezer and fridge unusable (totally unusable, it has taken over my life, but I still can’t use it and spend a fortune getting take-out food) is just shocking, but more shocking is the fact neither WP or the retailer (the blue one that starts with an L, ends with an S and competes with HD the orange store) will stand behind the product or the warranty and instead is telling me to flush multi thousands of dollars down the drain and take my new, with extended warranty, to the dump and buy a new one. Calls to both companies only led to more wasted time and frustration.I don’t even see how this can be legal. They happily took my money. They fully explained how I needed the extended warranty in case something like this happens and assured me the extended warranty would protect me in case something goes wrong for 5 full years. They will replace it with a new one if un-repairable. Yet in less than a year, Ive gotten 3 defective ones with the last one only 3 months old with the first service call made on the day after delivery, but I’m supposed to throw all this money down the drain, take my new fully warranted fridge to the dump and buy a new one?!Shocking and not something I can afford to do. If I could afford it, I would get this thing out of my house in a heartbeat and buy something else, but I’m not made of money so this is not an option. Not sure what I can do other than to warn others to avoid Whirlpool and avoid the retailer (L---s). I’m just in shock and to say I’m upset would not even come close to describing my utter disappointment and frustration with both companies and this whole ordeal (never ending nightmare is more appropriate).

I purchased my Whirlpool French door refrigerator about 2 years ago. I shopped around and read reviews before deciding on the Whirlpool. After about 9-10 months the ice maker didn’t seem to produce enough ice. I called the store I purchased it at and tried to get them to come out and find out what was wrong. They waited and waited. I had to call them back at least 2 times before they finally sent someone. But by the time they sent someone to look at it the one year warranty had expired. I spent $1800.00 on this refrigerator and it didn’t even last longer than a year. Of course Whirlpool wanted to come look at it and charge me another $100.00 service call and possibly another $100.00 for parts and labor. I will never buy a Whirlpool product again.

We bought a new Whirlpool Cabrio washer and dryer in January of 2012. We were setting ourselves up for retirement in a couple of years. Worst mistake ever! It cant get clothes clean especially dark colors. I wash my blacks at least twice, sometimes as often as 4 times just to get the detergent streaks out- simply rinsing a second time doesnt do the job. I guess I should be grateful that we have not needed to call a repairman. This is so disappointing as our last Whirlpool washer and dryer were over 25 years old???

I purchased this washers predecessor, the WTW6200 in May of 09, along with the matching dryer. The bearings gave out after 36 months of use, and our household comprises two adults in their mid-fifties. Estimated cost of the repair? $650! Why am I posting this here? Because two weeks ago, my daughter-in-law called to say that shed so liked my machine when she visited in 09 - Id had the thing for two weeks at that time - that shed bought the WTW8500B and... the bearings were already giving out. I suggested she get the thing repaired, sell it immediately and replace it with an LG product, which is what Ive done.She has been put on a three-month waiting list for the repair, confirming my feeling that Whirlpool, as a whole, has gone down the tubes. Their service record is dreadful, with an excess of 20K complaints existing at various consumer agencies regarding ALL the Cabrio line, and their warranty, Ive learned, is considered the worst in the industry. All in all, the single worst purchase of my fifty-odd years.

Two years ago, we bought a Whirlpool gas range, model WFG361LVQ2. The range-top grates were porcelain-coated, smooth and shiny. The range itself has worked flawlessly (Admittedly, it gets only light use in our elderly household, which consists of me and my wife). The only complaint I have is that the porcelain on the grates is failing. On one of the grates, its flaking off where the flame contacts with it during cooking (Photos attached). On another two, the porcelain has developed a surface roughness thats clearly a prelude to same type of damage as the first. The fourth grate still appears to be intact. The differences in damage is no doubt due to the different amount of use that each receives.When I called Whirlpool, a supervisor there told me that grates have no specific life expectancy, and that is true for plain metal grates as well has porcelain-coated grates. She also said that some chemicals can penetrate the porcelain and shorten its life. I told her we didnt use any chemicals on the grates, but only rarely used common kitchen scouring powder, and I cant imagine the powder or the chlorine in the powder could do that kind of damage.When I asked what it would cost to replace the four grates, she said $187. I told her the entire stove cost about $500, and it didnt make sense to pay almost $200 to buy grates every two years for the next thirty years. I told her that the grates on our previous (non-Whirlpool) range lasted the life of the range - about forty years. So I declined to purchase new grates, despite her offer of a one-time discount of 25%. Though the grates are becoming eyesores, theyre still perfectly usable. So Ill hang onto them until I can find some bare metal ones to replace them.

Mind you, Whirlpool products that we have purchased in the past have been satisfactory, but gas hot water heaters, no! About four years ago we purchased a Whirlpool hot water heater that went out in a little over a year. After spending many calls and time, we found out that the HWH was on soft recall. Whirlpool credited our account, but this was to purchase another Whirlpool, which we did. We paid for installation. About 2 years later, it has gone out. Same problem. Lowes says not their problem. Whirlpool says it will pay for the part only. Plumber will cost 150-200 dollars. All the plumbers I have talked to will not repair them, then they are held responsible when it goes out! As a disabled Vet I cannot afford to throw 400-600 dollars away. And, Whirlpool tells me that if they give me an RA number to replace the HWH, it will have to be a Whirlpool from Lowes. Great! Whirlpool quarterly report looks very good. Mine doesnt look as good. What can be done about a poor working product? Or is this too big to fail? Let me know.

I purchased a washer 6 months ago and it was starting by itself so I called to get a technician out and it took them 3 days to tell me that they did not service in our area. Long story short I was out of a washer for 2 weeks talking back & forth with Whirlpool which was absolutely a nightmare. Kept me on hold forever and hung up on me several times so they didnt have to deal with the situation. Absolutely no customer service at all. When it came down to it they were going to issue me a new washing machine and I had to go to the store to get it and when I got to the store they told me I had a $415.00 credit to spend. Thats less than what I had paid for the washing machine and then I am having to spend an extra $200.00 out of pocket to get another washing machine.My warning to you is not to purchase any Whirlpool appliances unless you want to go thru pure hell. These people do not care about anyone after the product is sold. Their customer service sucks, their appliances suck and Whirlpool just sucks all the way around!! Worst experience I have ever had and I hope they never sell another appliance again!!

I bought an electric hot water tank from Lowe’s less than 3 months. No hot water so I called Whirlpool. They give me service dept over 150 miles away. They will not come. I need hot water and need help. The hot water tank is half way in the attic and half in the closet.

Whirlpool Dishwasher is 5 years old. Used in a one-person household where dishes are washed approx.. every four days (rinsed before placing in d/washer.) Recently at completion of cycle, 2 of water remained on the bottom (still there.) Whirlpool told me it sounds like I need a new pump, the cost of which would be approx. $300 (tech visit and evaluation, parts and labor.) I understand appliances dont last forever but I expected more than five years.

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

I love the way the clothes are clean when I wash them. I also love how well they are rung out when I get them out of the washer to be put into the dryer. The washing time isn’t too long either as compared to other washers I’ve used where it took almost an hour to wash and the clothes didn’t seem as clean.

The lid stopped locking just over one year after I purchased a Whirlpool Cabrio top load washer, which disabled the washer from washing. After investigating, it seems the electronic control board needs to be replaced, which will cost $400 just for the part. I have a large family, including a disabled child, and a washing machine is mandatory necessity that I cant afford to replace after only one year.

I posted about our problem with the Whirlpool water heater on the 20th. Chris ** of Whirlpool called me back. He totally took care of the problem and got us back working. After 3 years, our problem is resolved. I am grateful to Chris for finally resolving the problem. He was professional, courteous and knowledgeable. Thank you.

We purchased our Whirlpool Gold series, french door refrigerator 22 months ago. The freezer and ice maker has stopped working. We had one repairman come out already and he couldnt fix it. We have another one coming in 2 days. I am very disappointed with the Whirlpool brand. I also bought a microwave, 2 wall ovens, and a dishwasher at the same time. The microwave makes a clicking noise every time you use it.

Sears, Whirlpool Cabrio Platinum washer and dryer purchased spring of 2013. I thought this would be a good combination to purchase quality appliances that would last for years. NOT! These machines are used by my wife and I only. Washer: Bearings go out. Repair: Replace tub and bearings. Quote: These things arent made to last more than about two or three years. Another quote. Do you notice that your clothes arent getting dry? Yes. Yeah well, you have to use the timed dry setting because the regular setting shuts off as soon as it senses one piece of clothes is dry and leaves the rest of your clothes damp. DO NOT BUY.

Approximately 2 years after purchasing a Whirlpool Gold Bottom Freezer refrigerator, I noticed cracks/openings on the interior walls on the ledge that holds the glass shelf! It is completely Crushing the styrofoam inside the refrig? Also, signs of being Cheaply made veggie bins are held in place by a piece of plastic that cracked after a few months. This was in 2011. First, I contacted the service contract people. They told me this was not covered under the policy. Next, I wrote & called the company. The walls show the styrofoam stuffing in the refrig. The shelves rest on these openings in the vinyl walls of the refrig box. This is a disaster and the refrig was 1400$$$. I have extended warranty which does not cover structure!!! What can one do with a New expensive refrigerator that has cracks in the Wall of the refrigeration box? Is there a class action suit anywhere that I can join?

I absolutely hate my Whirlpool refrigerator! The first day I had it, the cover to the deli drawer fell off and cracked because it wouldnt stay on. I called the company and they sent me a new one but it immediately fell off and broke also. It is just a terrible design. The plastic slots dont fit correctly and it just doesnt stay on.Then, a few months after owning the fridge, I notice rust spots on the bottom drawer. I called the company and a rep told me to buy dishwasher cleaner and a magic eraser and use that to scrub the rust off. She insisted that it must be near humidity. I explained that my GE stove and dishwasher, along with other stainless steel in my kitchen have never rusted. The Whirlpool company provided no help whatsoever and does not back up their warranty. I would never purchase another Whirlpool appliance after this experience. Now I am stuck with a fridge that has rust stains and a broken door.