We purchase a Whirlpool duet washing machine 4.5 years ago. Just recently the bearing went on the machine. Took the machine apart to fix and was originally told new parts will be delivered free of charge since this is a common occurrence. 5 weeks later and several phone calls, we were told the part is on back order and they do not make it anymore. Then they send an email to keep us as customers for 15% off. Ridiculous. How do you go from getting parts for free since it is a frequent occurrence to not having the parts at all and getting 15% off for a new product? Why would I want to stay with these false claims? Talk about a slap in the face!

I have had my whirlpool top loader washer 2/12 years. There are 3 adults in our household, but we do at least 1 load per day. During a spin cycle we heard a loud bang and then the washer starting spinning very fast. I called for repair and was told the cost was 500.00. Now I must buy a new washer as that cost is excessive and I see this is a common problem. This new washer will not be a whirlpool!!!

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

I had purchased fully automatic top loaded WHIRLPOOL WM 360 BW PRO-HS 9.5 on 08/05/2019. I had purchased the above machine after going through the various claims made on the website. However, I regret to say that since installation I find that the performance of the machine is not up to my satisfaction. Even after two visits by the engineer, the following issues remain:(i) The machine makes lot of noise in the initial stage.(ii) Though the timer shows a particular time during selection of a washing cycle, in reality the machine takes one and half times more than the timing shown. In case one selects warm / hot water, the actual time taken is twice that shown or more. I am sure in winters it will take more time in case warm / hot water is selected.(iii) The clothes get badly entangled during wash.In the past I had a LG front loading washing machine which never gave me any problem. I had gone for the best top loading model of Whirlpool hoping for better performance but it has only caused problems. Not worth the expenditure.

These reviews re Whirlpool washer proves I can no longer trust Consumer review. This washer is junk. Does not clean, Takes over an hour to not clean your clothes. I have to add water to cover the clothes. They come out as dirty as they went in. Want an honest review? Check out the ones on Amazon.

After the pilot light on my water heater would no longer stay lit, I contacted the Whirlpool technical support number listed on the unit only to be told my unit was still under warranty, but I would be responsible to pay a $65 diagnostic fee and any labor associated with a repair. The technician came and said my ventilation system was the problem and didnt even touch the unit. He then sent a report to Whirlpool that the unit was flooded which voided my warranty. He did not submit photos to substantiate his water damage claim and now Im being told the unit is unsafe and must be replaced at my expense. This all sounds like collusion to not honor the warranty! I will never purchase a Whirlpool product again!

I would like to know if anyone else is having trouble with the broiler unit. The unit quit working. Thankfully I had purchased the extended warranty. The guy came out, cleaned the orifice and called it good. The next day I went to use it, and guess what, it did not work!! So we thought maybe we needed to leave the oven door cracked open a bit... Well, guess what... It melted two of my knobs!! We called, got another guy out here. He checked everything. Even pulled the stove out to check out connections. Then he informs us that you can set the broiler to whatever temp you want. Thats new. So again, we try the broiler.... Guess what... It got to the temp and clicked off. Now I ask, how does one broil a steak if it does that? I did call Whirlpool directly and got nothing. Our model is WFG361LVQ2. So please, if anyone out there knows that this is how it is supposed to be... please let me know.

We purchased our oven from Sears, and less than two years later, the oven would not cook a chicken. We do not use the oven very often. We grill out and use the top burners often. We had the oven repaired through our home warranty program, and now 8 months later, it seems to be occurring again.

We purchased our Whirlpool Refrigerator, oven, and microwave a little more than a year ago. Not a single negative event with any of these products and my wife and I wholeheartedly recommend Whirlpool for operation and last ability, unlike the products we replaced them with.

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

I purchased a Whirlpool over the range microwave (model #YWMH31017AS-1) in April 2013, and had it installed in August of same year. It worked fine up until November 2014 - just over one year later. Everything on it works, except for the most important feature - IT DOESNT HEAT ANYTHING UP. Doesnt matter how long you set the timer for - the contents come out stone cold! I called Whirlpools 1-800 number and was told that because I did not purchase the extended warranty, I was responsible for all parts and labor costs. I find this completely unacceptable! I have had cheap $70 microwaves that have lasted 15-20 years. I will never buy another Whirlpool product, and am telling everyone I know to do the same!

We bought a Cabrio washer & dryer September 2010 for a room addition that wasnt completed yet. We didnt get moved in until the first of November. So the washer wasnt used until then. In January 2011 (15 months later) it stopped spinning so clothes were dripping wet. We called Whirlpool and were told that they would be happy to set us up for a service agreement for $322 for one year. We declined since we bought the washer for a little over $500. When we had a local Whirlpool service man come out and he determined that it was the control board which would cost $265 (Whirlpool only warrants parts 90 days). I sent an email to Whirlpool and was told too bad, so sad. We called their customer care line (that is really not the term for that phone center) and asked to talk to a supervisor, who essentially told me the same thing. Whirlpool is making equipment that is extremely poor quality. There is no incentive for them to produce a better quality product as they make money on the extended warranties that are necessary, or if you dont buy an extended warranty they charge an extraordinary huge price for their parts, which they dont warranty. We will never purchase anything made by Whirlpool. I am not sure where this useless piece of junk that I have will end up but I intend to let everyone I know what a terrible company Whirlpool is to deal with.

How I wish I had read this board before purchasing! This is the worst washing machine made. Put your clothes in the sink, add water to cover two thirds, add detergent, slosh around slowly for a few minutes, wring and remove. You have replicated a Cabrio wash! I have complained repeatedly, had a repairman who assured me it was working properly (as designed, too little water, too little agitation). I was a lifetime Whirlpool client.

Apparently, Whirlpool selling all their rejected faulty washing machine in the market. The trick they are playing is the machine being sold with one year parts-labor warranty; They wont replace these machines with a new one because they know that these machine will never work, consumer will buy the faulty machine, obviously it wont work so consumer will call for service. The service guy will say that “oh! Machine needs a part and then the customer service will say “the part is being ordered”, “wait”, then the service guy will come with the part and after wasting some time he will say “Oh! The machine needs another part, and again customer service will tell the consumer that “you keep calling us”. One year will be gone! Bottom line – faulty machine is sold, Whirlpool made profit, buyer is robbed. I am one unfortunate customer who purchased Whirlpool Washing Machine which never worked as it is a faulty machine which should not go to the market at all; Whirlpool made money on my hard-earned dollars and I been robbed.

We bought a nice stainless dishwasher from them and got the three year extended warranty. Parts of the racks have slowly been breaking off, and now its started leaking from the bottom at the end of its cycle. We called Home Depot only to find out we were 3 days over the warranty, and basically out of luck! We will never buy another Whirlpool again, or shop at Home Depot.

I bought a Cabrio set in June 2007. Within two years, I had to have the barrings replaced ($800 job). Now, its two years later and Im getting a F50 code. The repairman put in a new part, still got the same code and left. I am out $970. I am a disabled vet/single parent and now I have to buy a new washer. Who is going to start the class action suit against Whirlpool?

I would not, at this time, even really give this product 1 star, but that was the lowest rating allowable. We purchased a Whirlpool Gold French Door Refrigerator at Lowes a couple of years ago after our Amana was toasted by a close proximity lightning strike. (It got more than just our frig, but the replacement frig is the only item we have had issues with.) We even got the extended warranty thru Lowes for the unit. Shortly after the extended warranty expired we started having issues with the bottom freezer door icing up. We thought that possibly the grandkids had not shut the freezer. So we cleaned up the ice around the door, but the problem persisted.The ice cream in the freezer was rock solid, to get it out of the container you had to put it in the microwave for a couple of minutes. The items in the frig were also frozen. So we emptied the frig and freezer, unplugged the unit and let it sit for a couple of days with the doors all open. We then plugged it back in and hoped for the best. It seemed to be ok for a couple of days then the ice on the freezer door appeared again. At this point, I contacted Whirlpool to see who was a licensed repair company in our area. I contacted the licensed repair service, explained my issue, they got the model and serial number info and ordered what parts could conceivably be the culprits.The tech came, the unit was frozen up, all the vents in the freezer were showing icing. So he removed the back of the freezer compartment and thawed the unit out. At the same time I mentioned that the ice maker had quit working, he found that the wiring connection was not properly connected and fixed that while he had all the stuff out. After re-assembly he ran all the diagnostic tests Whirlpool lists and found everything passed. Since the boxes of parts had not been opened they could all be returned to stock. So no charge for parts, as he could not find indication that any were needed.So 1 service call at $100 and it appeared that maybe the issue was resolved, not the case. Not even a month later, issue re-occurred. No grandkids had been there, no instance of the freezer possibly left ajar. Another service call, and by the time the tech arrived, since I had unplugged the unit and emptied it again, all the frost/ice was melted. $100 for a service call, tests all came back as nothing indicated as not functioning.So if I dont put too much stuff in the freezer or too much stuff in the frig it will run without freezing up for about a month. Oh and weekly put it into the defrost mode a couple of times. Now it has started making a tic-tic-tic or rat-tat-tat sound to the fun and games. If the noise is non-stop, it only stops when you open the freezer door. Leading me to believe it is a fan. (Correct, I was told by the local Whirlpool licensed repair facility.) I have spent the weekend, again thawing out my unit in hopes that the noise will cease. It is loud enough to be heard at the other end of the house.No such luck, so I spent an unproductive 1-1/2 hours on a call to Whirlpool yesterday. The larger part of the time was on hold waiting to talk with someone, anyone. Due to our unusually high call volume, wait-time is long today. Thank you for your patience. To retain your place in line, do not hang up. Finally, I got a rep named Karen, who sounded like she was almost asleep. She had very little to offer except, Im sorry you are experiencing these problems. I have no record of previous complaints like yours on record for this model of our product.Hello, I found 929 reports of the same issue on Consumer Reports. Oh, you cant believe what you read on the internet was her response to that tidbit. She offered to sell me a Repair Plus 1 Plan for only $359.95. A licensed repair service comes, repairs your unit and the plan gives you ONE YEAR of peace of mind. Lets see... I said... so you are offering me an extended one year warranty? Oh, but it comes with a repair first then one-year peace of mind. Seems that Whirlpool has moved into selling warranty extensions rather than fixing the issues with these Whirlpool Gold French Door refrigerators. With what I have already paid for service calls added to this Repair plus 1 Plan, I would have invested $$$ enough to BUY A NEW FRIG that is not a Whirlpool product.Seems a bit foolish to me. So Whirlpool is not admitting that there is a design or manufacturing problem with these units. Even the ones sold just this year seem to have the same issue. They have not corrected this and it appears they have no intent to do anything about it. She did indicate that they had a known issue with the drain and that a fix was offered for that (a redesigned drain unit could be installed). But since I was not getting ice build up on the bottom of my freezer compartment I did not appear to need the redesigned drain unit. Her evaluation of my issue was that the drain did not appear to be a problem.So after a fruitless call to Whirlpool, oh and they did have my previous emails concerning my issues on file but did not consider my complaints to be part of a known issue, I have the local tech coming back to see if possibly there is something, anything to be done with this refrigerator. So another $100 at least, likely no resolution if the service tests all come up normal again! So when the tech comes, I am going to ask him to contact the service engineer that he is supposed to have the contact info for (per Karen at Whirlpool) and see if he can get any resolution to my issues by using that service engineer.

There is almost NOTHING I like about my new $1000 Whirlpool Cabrio Platinum washing machine! The clothes dont get clean. Stains become PERMANENT because clothes are spun and matted so tightly together, the 2 inches of water allowed into the tub cant dissolve them. Fabric softener stays a gummy substance because it has to be SUCKED out of the dispenser, not sprinkled out with water. I pin socks together to keep them in pairs, but this machine rips them apart and the safety pin end up in the bottom. My bathroom rugs are shredded. You cant add an extra item if you need to, because the tiny portion of water leaks out. There were DRY spots still on the sheets at the end of a cycle. This machine is an engineering nightmare, sort of like the Edsel. The only action programmed to clean the clothes is a wiggling motion on the floor of the tub. The tub spins so much, energy goes through the roof. Man was given 3 survival elements to assure our existence on earth: water, air, and food. Why are engineers trying to faze out our use of water? This machine has dazzling looks, but NOTHING else. I am so sorry I didnt read all the reviews first. Who would ever think the environmentalists would inflict such pain on our basic domestic obligations! If I dont get my money back or a decent exchange at Sears where we bought it, Im taking the machine to their parking lot and commencing a show with a baseball bat.

This machine, like all other water sensor machines, will not let you wash a few items that are lightweight without filling the whole machine up almost all the way. The reason being is that if the items are light, they will float in the water above the water level and the sensor thinks it needs to put more water in and even with putting something in to weigh it down like a wet towel doesnt always work, nor should you have to do this. You will waste more water in the long run if you only have a few items to wash, ie baby clothes, underwear, rags, etc. I am so disappointed that I had no other choice but to get this machine.

The front of the stove gets so hot you can burn yourself and I feel it is not safe around small children or grandchildren, and it should addressed to fix the problem not just cover it up. Please give me the info to fix the problem before I have to sue over my grandchildren and great children getting burned.

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

I purchased my Whirlpool Gold series french door refrigerator 3 years ago. I bought Whirlpool because it being an American company and a brand I thought I would be pleased with. Wrong! I have had nothing but problems with this refrigerator. Thank goodness I bought the extended warranty! Just a year old, my ice maker stopped working. Then, the refrigerator stopped cooling. Circuit boards were replaced, fan motors, etc. over $1500.00 in parts and labor and the entire summer to have it fixed. This past August, ice maker stopped working again. Then, stopped cooling. I am now at week 6 without a functioning refrigerator. While I am thankful I have an extended warranty, through the store that I purchased this refrigerator, I am not thrilled with the amount of time that has passed between each visit and the fact that it is the exact same parts that are once again being replaced. This refrigerator is a LEMON. Do not buy this brand.

Purchased the washer 11/26/12. Did not get extended warranty.... big mistake. By 12/1/13, control panel went out. Serviceman assessed ($100 service call). Quoted $495 to replace. ABSOLUTE JUNK! So very sad and angry that there is no recourse with Whirlpool.

My first time with Whirlpool (Always had GE) but at the suggestion of our builder, we went with Whirlpool and the stainless steel is horrendous. Nothing will clean it or make it look STAINLESS. My refrigerator, dishwasher, double oven, tall vent all look terrible no matter what I use! I have never had this problem before. Im embarrassed to have anyone go into my kitchen...

We purchased a Whirlpool side by side from Lowes and an extended warranty. Immediately maybe a month the ice maker froze. Ice container in the door. Repairman said design is notorious for this problem. This was an ongoing problem. They replaced icemaker and it continued. Finally the warranty people told me it could be deemed a lemon if repaired for the same issue 4 times in a year. They deemed it a LEMON and I received a store credit for the purchase price less the warranty amount. I purchased a new LG French door. No issues and its been 5 years. If you have an extended warranty do some checking on the lemon.

I bought a Whirlpool Cambrio washer/dryer set last year. I hate them. They dont get the clothes clean, let alone wet! I couldnt believe it! I put my grandsons bib in the wash and it came out completely dry with the stuck on food still there. My husbands shirts still smell like the cologne he put on! I asked a Home Depot sales person about this and he says, yeah, we hear that a lot. !!!!!!! Im going back to a washer with an agitator so that I know my clothes are being cleaned. This whole water control business is insane. Whats the point if you have to wash the clothes several times to feel like they are marginally clean? The problem is that the industry has decreased the amount of models that still have an agitator so my selection is very slim. First and LAST time I ever buy Whirlpool.

The refrigerator has excellent quality, low noise level, clean lines and enough room for produce and frozen foods. Would recommend this to friends. This replaces a Whirlpool refrigerator that was over 30 years old. The original unit still works extremely well and we gave it to a family that needed a refrigerator and they were very happy to receive it. It looked as new as the day I purchased it 30 years ago.

Bought a $2500.00 fridge in Dec. 2012. By July, we were dealing with our 4th repair. Customer service in warranty department is non-existent. They act like you are a bother and have no right to demand replacement. I sent an email. No response. I wrote a letter to Corporate. No response. Not until I made comments on Facebook. Then I get a call offering me an extended warranty (which I already had purchased) so they said they would give another year (total of 3). This was a few weeks ago. I still have yet to receive anything or hear anything. This morning, our fridge is on the fritz again. I am loathe to have to deal with them again, but have no choice. Its either deal with them or throw out the 8 month old unit and buy something else. I should not even have to consider that. Whirlpool is a huge company. I do not understand their reluctance to just replace a product that is obviously defective unless they have no confidence in a replacement unit. This is so frustrating and upsetting to me. I did my research. I thought I was getting a quality product from a quality company. What a disappointment.

Worst washing machine ever, I should’ve kept my 12-year-old washer that leaked, it worked better and actually washed my clothes... This washer, the Cabrio 5.3 leaves clothes DIRTY, can’t use fabric softener because it doesn’t wash it out even with the extra rinse and deep water wash, leaves white ** on everything!!! I have to wash everything TWICE! I hate this washer! I hate Whirlpool! Piece of **, I want my money back or I want a different washer that actually works as it should! Wasted money on this piece of **! BUYER BEWARE. DO NOT BUY!!! Bought from Best Buy and boy did they sell it to me, told me it was the best washer out and will save me money! SMH.

The washing machine has been through 4 boots. The boot material is so flimsy, that they tear constantly causing water to leak out of the machine. There are times it is minimum water, and other times a lot of water.

I purchased my Whirlpool Duet in 2007. I have since paid more than what the washer costs in repairs. Now, the metal that braces the basket has corroded and fallen apart. Ive read that this has happened to many people and since then the company has changed the part. However, they are unwilling to send a new part to me. I will never buy a whirlpool appliance again.

On October 29, 2009, we bought a new Whirlpool 30 gallon gas hot water heater to replace a Rheem we had for 20 years. We immediately had problems with the relief valve leaking, so we ran at the local hardware store and bought another valve. Next, we had trouble lighting it (husband was a plumber years ago) but a call to the hotline and we were in business. Now just over 3 years later, the pilot light started to cut off at will. Troubleshooting solved nothing. We called the hotline again and were given a part number, an authorization number and told to go back to Lowes for a replacement part. Figuring how our luck runs, I called first and was told there was no such part number. Trip saved. Now after reading all of these reviews, we have decided to cut our losses and buy another Rheem. You can find the Whirlpool hot water heater sitting beside our 2-year-old Kenmore HE washing machine (also made by Whirlpool) on the garbage pile. No more Whirlpool!

Burners always needed replacing and now do not work anymore - Whirlpool range looks nice, but very expensive to maintain. The burners constantly needed replacing, they do not heat up. I got a repair technician to look at it. He replaced the parts that the burners hook into. Now they do not heat up at all. Well, one of four barely boils water. The oven still works, oh great. The thing is only 7 years old. I have had ovens that lasted 20+ years at my dads house or 15 years at another house I lived in. With all the negative comments and the repair guy who tried to fix it, I think it is time to get the kids Easy-Bake Ovens out of the storage or buy a new range. Obviously, it will not be a Whirlpool. So many negative comments people left, my useless top burners seem mild comparatively.

Awful customer service. We bought a washing machine in 2010 and it has shredded a ton of clothes over the years. I called customer service to see what they could do to help me with this problem. After about 45 minutes of trying to get more than a service that I would have to be responsible for, the supervisor offered me a new washer at a discounted price. I went online to compare and found out I could purchase the exact same washing machine at home depot & best buy for $50 cheaper. I called back to see if there was anything they could have done and they would not budge.Shame on you Whirlpool. You have lost a customer and I will make sure no one I know buys one of your products ever again. I cannot believe that you would not make any accommodations for us. We bought that washing machine with the intention of keeping it for 15 years. It has cost us countless amounts of blankets, shirts, pants, etc. I cant believe you wouldnt help us after all the money this piece of junk cost us.

I’m disappointed in this dishwasher, it’s not yet a year old, and it doesn’t clean the dishes, and it also does not dry them. I now wash and dry my dishes by hand, the machine stays soaking wet even two weeks after running it.

AVOID Whirlpool water heaters - Bought two 12 year warranty water heaters from Lowe’s in 2014. Model NU50T121-403 from Whirlpool. Thermocouple went out within the first 4 months. Called WP, they gave me a number to call for an authorized contractor to come out. Made certain to tell me that PARTS were covered, but not labor. $300 for the labor and two days later, hot water is back on. SAME THING happens again 6 months later, then AGAIN in Sept of this year. So 3 guys have been out to all replace the same part. This morning, hot water is out. Both tanks. Can’t keep pilot light lit. Called WP. They gave me more numbers of authorized contractors. No hot water and now I’ve got another $300 I owe to fix the SAME BROKEN PART. I wonder if this is how their last class action lawsuit got started?

Bought new dishwasher on 11/29/2013. Model #WDT710PAYM. The top rack cannot hold much weight. It keeps collapsing. One side keeps falling out of the track. Had man in for repair, still doing it. They sent me a new rack and rollers, still doing it. Having repair man come back again in a few days. I am so disappointed with Whirlpool. I cant believe they went so cheap in building these machines. I gave away a whirlpool gold that was 20 yrs old and it is still going strong with no problems. I just wanted to update up kitchen with stainless steel appliances. I will never buy whirlpool again!! This cannot be fixed. It just doesnt fit tight. Im stuck with a bad dishwasher and shouldnt be.

Bought refrigerator in Jan of 2019. Quit making ice in Oct of 2019. 3 service calls and felt like it was band aided until manufacturers warranty ran out. Now waiting on new freezer door to be made. 6 to 8 weeks out. We will see. Called Whirlpool and was offered nothing. No customer service whatsoever. Will never buy another whirlpool product again.

Washer does not clean clothes period. Darks come out covered with white soap residue and smell dirty regardless of how little soap is used or with using extra rinse, which takes 84 minutes by the way. Whites only seem slightly cleaner since hot water is used and you cant see the soap residue. If you wash more than 5 or 5 items at a time some do not even get completely wet. Just waiting for it to break down next according to the other reviews. I spent a lot of money to get a nice washer and dryer and ended up with junk. Id rather have an old 1970 washer, probably designed better and most likely would clean better.

We purchased our suite of appliances from Home Depot, this was a great experience. Unfortunately that is were it stopped. Our 1st refrigerator caught on fire in the electrical within the unit. We got a 2nd refrigerator sent to us and it came damaged. Then they sent us a 3rd refrigerator and it caught on fire in the electrical as well. Weve been dealing with this all since August 27th 2019 and here its now October 14th 2019. At this point I feel this model of Whirlpool is truly unsafe.

In June 2003, I purchased a Whirlpool Gold Conquest Side-by-Side satina finish refrigerator (Model Number: GAS6SHAXLL03; Serial Number: SP1452552). The ice-maker has always had freezing up issues which I never complained to the company about. It has made weird noises (nothing major) but was already out of warranty. I paid $1,600-1,700 for it. I did not have the money to pay for repairs and I am sure that the repairman would have never found the problem. Two days ago, there was an electrical smell in the house. After an hour or two, it started getting stronger and stronger so my husband looked at the fridge. There was smoke pouring at the back of it so he pulled it away from the wall and we unplugged it. Surprisingly, the plug was not hot. Had I not been home, it could have caught fire, burned the house down and killed my dog! I am furious about this. When I called, Whirlpool says, That model is not under a recall. Would you like me to transfer you to service for repair? Really? Those big corporations dont care! There needs to be a recall on this because I have seen this same problem many times on blogs and forums. Well, guess what, I used to be a Whirlpool fan, not anymore! Now, I went and purchased a new refrigerator, and the brand name is Samsung! I recently bought a Samsung front loading washer and dryer and they are great. It looks like the Whirlpool dishwasher in my kitchen will be next! I bet Samsung makes a nice dishwasher.

Whirlpool N50T91-403 purchased in Mar 12 had an error code 4. I knew the water heater had a safety installed in it when I was working on the plumbing and allowed it to drain the hot water side down to 16% of capacitance of 50 GL. After the plumbing issue was resolved, I saw the water heater had shut off (thermal protection) but the switch wasnt tripped as far as I could tell. Knowing small processors can only remember anything if they have power, I removed the Honeywell circuit board and with my multimeter probed all of the capacitors contacting them both (-) and (+) and in reverse order. Doing this forces the IC to forget its codes because they require a small amount of voltage to remember them, usually powered by a small capacitor. I reinstalled it and voila! Presto! It works again.

I have not had any problems with my Whirlpool refrigerator. It is four years old and has had two owners, including myself. It has the stainless steel look and has top to bottom french doors, one side is the freezer and the other the refrigerator. Both sides are equally the same size. It has a filtered water dispenser and ice maker in the door. Id say for the price it is a really good value.

Purchased a Whirlpool refrigerator model WRF560SEYM in June 2014. In February 2015 the ice maker had to be repaired because of a leak. Now in February of 2016 the ice maker and water dispenser are leaking. Because the warranty is one year, Im basically stuck with a refrigerator that sucks. Not only is the ice maker and water dispenser broken, the door sometimes doesnt shut properly and the shelving couldnt possibly be more cheaply made. This refrigerator is in a vacation home and has barely been used. I have purchased many Whirlpool appliances on the past and have never seen such poor quality in an appliance. The only thing Whirlpool can offer is sorry youre stuck!! No more Whirlpool for me!!

I bought a house 2 years ago that came equipped with all new Whirlpool kitchen appliances (refrigerator/freezer, stove top and dishwasher). A few months ago, the damper door in our refrigerator broke causing food in the refrigerator to freeze. Just the other day my Whirlpool dishwasher stopped draining properly. Both instances a repairman was needed and were now out over $400 for repairs and parts. I would definitely not recommend purchasing any Whirlpool appliances and I am deeply frustrated that Im having to deal with these repairs and costs for appliances less than 2 years old.

I brought a whirlpool dishwasher in 2013. It never did clean dishes, had to wash them by hand before putting them in dishwasher. Had someone come out and check it. He told me I was using wrong type of soap, so I changed. That didn’t do a thing. Now I have mold growing in the dishwasher because the tub is cracked all around the inside. Called whirlpool, of course they couldn’t do anything about it. Have never heard of dishwasher cracking. So today, Lowes came out and took picture of crack that is where I brought it. So am waiting to find out what is going to happen. Will not ever buy whirlpool again and will tell all my friends.

I purchased this washer from Lowes 5 months ago. I did not purchase a store warranty. Started having problems 60 days later. I have to deal with a Whirlpool rep. The company is 150 miles away. They have been to my home 3 times to resolve the issue. They replaced an air trap. The problem... my clothes still wont spin dry!!!

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

Whirlpool duet - This washing machine is absolutely horrible!!! I pull clothes out and they are tore up! We have replaced parts that we were told could be causing the damage and its the same thing! I am very unhappy! Ill be calling Whirlpool again but Ill probably get the same runaround - oh we are very sorry we dont have any known issues with that machine. Clearly when you look online it is a very known issue!! I doubt all of these people lied about calling!!

Four microwave ovens to finally get one that works. Four months after purchase, the French door fridge accumulated ice, 3/4 thick, in the bottom of the freezer compartment. I had no knowledge of this until the drawer became difficult to open and close. Lowes is replacing the unit.

In August of 2008 I purchased a Whirlpool Amana refrigerator, Model# ABR2227FES. It worked great for exactly 6 years. In Aug of 2014, the motherboard needed to be replaced as it was not forcing a defrost when needed. I tried to get a refund on the cost of the part and labour but both were refused. In Dec 2016, just two and half years after the motherboard was replaced, the exact same problem re-occurred. Again I tried to get a refund on the cost of the part and labour but both were refused. Will I be buying this refrigerator in the future? A definite no!!!

I purchased this washer brand new just 2 years ago. It started making loud crackling noises approximately 3 mos ago. Yesterday it decided it did not want to spin or drain. Today a repairmen tells me its a wash. The computer screen has gone wacky and the cost to replace that will be well over $400, almost to the penny what I spent 2 years ago. This is not a good product Whirlpool and i trusted you since my previous washer lasted over 15 years. I need a refund and a new washer! Disgusted!

Purchased a Whirlpool French Door Refrig. Model #WRF 954CIHZ200 in 11/21/2017 from Best Buy for $2300.00 on sale. Within the 1st year the Ice Maker broke & repairman said the ill design caused the wire to break. He had replaced numerous ones for the same reason. In the 2nd yr the freezer started frosting. Next thing the freezer quit. Next day refrig quit working. Called Whirlpool, said, So sorry. We will send you a $50.00 Visa gift card. That was to cover $200.00 of just bought groceries. Called repair guy & he diagnoses compressor was bad. (IN A LESS THAN 2 YR OLD REFRIG. THAT COST $2300.00????)Now, we are 28 day w/o refrig. Living with a Igloo cooler. Whirlpool says they have no stock left on compressors for our refrig. (probably because there are so many going bad in their refrigerators). They are trying to locate one somewhere in US so that takes 6 days then they have to ship to repair center then they have to schedule us for repair which will probably be another 7 days. Ghee, what a mess! Dont do it folks! Buy a LG or Samsung! If I had it to do again, thats what I would do! Whirlpool is Not what they use to be when I trusted them. Years ago. P.S. I bought microwave, stove, & dishwasher! They are all unsatisfactory! Never again!???

I bought this refrigerator WRT111SFDW for less than $600 through Home Depot in Oct 2016; it was delivered and placed into use in late Dec. (Home Depot still shows the order as Processing). Had an icemaker installed during delivery. As of today Ive had to call for service 4 times. The refrigerator compartment does not cool properly. Services have been through Whirlpool Service as this appliance is under warranty. Technicians are Whirlpool-approved. I have another refrigerator from Whirlpool that operates just fine. It seems as though the cost of sending repair techs would be higher than the cost to have replaced this unit. Terms of the warranty state that Whirlpool makes that judgment; not the purchaser. Sorry I bought this piece of junk. How many service calls on one appliance is too many???

Recently had a Whirlpool gas water heater installed. Would smell gas every time the heater kicked on. I inspected the vent, all the new fittings, with no luck. Leaving the windows open didnt help. Finally found the problem: the factory-installed line from the gas control valve to the tank was leaking. Should have kept my old heater. It was still working flawlessly after 20 years. You would think a new heater would at least be inspected before hitting the market.

One year old Whirlpool gas oven/range w messed up control panel. Every brand new Whirlpool so far has broken or is messed up within first year of purchase. I am going to complain to BBB.

I found this site while looking for a part number for the thermocouple. Lowes had one, but not for the FG model. I decided to call the number on here from Chris to see where I could buy the correct one with left-handed threads. I was told that they would sell me the conversion kit, but I couldnt get just the $8 thermocouple. Then $47.90 later and the conversion kit is on its way. Im not happy about it but at least I got 6 years out of my water heater before the thermocouple failed. The plus side is next time, I can get the $8 part from Lowes and not be without hot water for a week.

I purchased a Duet several years ago and did not have a clue as to the problems everyone was having. Over the course of ownership I called the city to determine if we had a sewer leak. I had a plumber inspect our pipes. I felt really stupid that it took me this long to figure out it was the washer. I knew it smelled like mildew and have been using vinegar, afresh, Clorox until I am blue in the face. I didnt figure out that the sewers smell was also the same as the washers until I got on line and read about these machines. Finally, I lifted up the gasket around the door and it was completely black with mold. No amount of afresh was going to fix this problem. Do not purchase these front loaders. Feel like they should have been recalled and I really dont understand why they are still in circulation. I have also been having health/breathing issues and I cant help but think the mold is causing my illness.

Purchased new Whirlpool washer from builder - never worked. Serviced 4 times by Whirlpool - does not wash, does not sense, shakes like crazy. No resolution from Whirlpool - worst customer service experience.

I recently purchased a top of the line self-cleaning Whirlpool/KitchenAid range. Or so I thought. I used the self-cleaning feature for the first time only to find out it literally does not do anything. Whirlpool quickly answered my Saturday morning phone call and were very professional. When I told them the Aqualift did not work, they asked if I purchased the Aqualift kit. No, what does it contain? Two sponges and a scraper. Basically I was told I would have to clean the oven manually. That would be fine except I have osteoarthritis and cannot clean it manually. Shame on Whirlpool and KitchenAid and Consumer Reports for not doing their due diligence and not testing important features accurately, over a greater period of time with real day-to-day scenarios with people who actually know what they are doing.

I have owned this Whirlpool Refrigerator French Door MODEL WRF990SLAM01 for less than 10 months. The ice machine broke down completely a few weeks ago. We called Whirlpool and they sent a repairman out the following week. He left saying he had to order parts. About 8 days later, they called to let me know they have the part in and scheduled a time to fix it. They put the new part on and said ice should be coming out in the next 72 hours. It never happened!! Not only did the ice maker stop working, the freezer stopped working which was about $300 worth of frozen meat/goods down the drain. I called the appliance repair guy. He said, I was worried about that, this product is known to have these issues. I asked, Does Whirlpool know? He replied, Absolutely, they have a kit to fix this but its not 100% guaranteed to fix this issue. REALLY?!!! I called Whirlpool and they could have cared less. There were no apologies, no type of compensation (exchange/replace). It is now going on day 22 and we still have no ice or freezer. This fridge cost me $2500 and four requested days off so I could wait for the repairman. Whirlpool, you as a company should be ashamed and outraged. You are more concerned about the bottom line of recalling these lemons and forgetting the impact you are having on us consumers. How many people are going through this issue that will not under any circumstance purchase a Whirlpool product again? I am so happy I am not investing in this company as this will impact this company in the future. They may be selling quite a few now to new homes/builders but when the word gets out what type of product they are selling and not repairing prior to the sale and knowingly letting people buy these, it leaves quite a bit of culpability on their hands. IF you are going to sell crap product, then stand behind it and repair/replace it prior to selling it to retailers!! You are a pathetic company!! STAY AWAY FROM WHIRLPOOL PRODUCTS!!!

We purchased a Whirlpool French Door Bottom Mount Refrigerator on July 14, 2014. Price $2,139.99. We chose Whirlpool because they have always manufactured and stood behind their products. Hah! We will NEVER purchase another Whirlpool product or even a product made by Whirlpool. The refrigerator quit cooling over a week ago. After calling Whirlpool service center they set up an appointment for a service call. The repairman came out said it was the refrigerator fan motor and another piece. He tried to order both but was told the parts would have to come from Lakeland, Florida and it would take about 5 days or so to receive them. We called Whirlpool. After being on the phone forever they finally said they would overnight the part to our home address then we should call the repairman to make a return visit. We received the parts last Thursday, called the repairman and he couldnt make it out here until today. When he got here and started to replace the part he discovered Whirlpool had sent the wrong fan motor. He called Whirlpool and they said the part was on back order and it would be shipped in 5 plus days or so. Both my husband and I talked with Whirlpool and the only thing they were willing to do is if they find the part they will ship it overnight then we would have to call the repairman and schedule another service call. They did say if we found the part they would reimburse us for the part. They wouldnt talk with us about replacing the fridge, etc. I will be out of a refrigerator for what looks like 2 plus weeks and this is not acceptable service from a company like Whirlpool. Pretty much everything in our fridge has gone bad. Whirlpool is not even willing to compensate us for our loss of food. They said all they could was offer us a 6 month extended warranty. We are completely unhappy with their service or rather lack thereof.

We purchased Whirlpool Cabrio Washer Model #WTW7300DW0 and Dryer in 2013 from Home Depot. The washer is the worst appliance we ever owned. It makes a horrific metal rubbing noise during agitation. The Whirlpool assigned repair service provider, after 2 trips and $300 has been unsuccessful in repairing the problem. Even after he called Whirlpool direct for assistance. Given that we used a Home Depot Gift Card for purchase, the repair expense is rapidly diminishing any benefit to keeping the machine. Well not even consider purchasing Whirlpool again.

Warning to anyone considering this washing machine. It has actually destroyed some of my clothing by twisting and tying legs and arms of pants and shirts tightly together and giving the clothes a beating rather than a reasonably careful washing. Rubbing your clothes on a rock at the bank of some river would be preferable to using this machine. It does not provide enough water to wash clothing without abusing it. I blame myself for assuming that no company would attempt to put a product that performed like this on the market. I bought this machine at hhgregg.

Im yet another angry customer who is dealing with a defective Whirlpool hot water heater purchased from Lowe’s, still under warranty, and it failed. The thermocouple appears to have failed and, amazingly, the part is nonstandard in that it screws in backwards compared to every other HW heater. Lowe’s doesnt carry the part even though they sold the HW heater. When I contacted Whirlpool, they agreed the part is under warranty and will send one, but I have to pay shipping for a minimum of $10 and a week to wait, plus having to get the part installed. Obviously, I am one of many who bought this defective appliance. Whirlpool used to be a good company, but Ill tell everyone to avoid them in the future. Meanwhile, I have no hot water and its freezing in Cincinnati.

I purchased a Whirlpool electric water heater in August of 2008. The unit had a 12-year warranty on the tank. On January 21, 2012, I discovered that the water heater sprung a leak somewhere in the tank shell; it’s not the pressure relief valve, thermostat or anode port. The tank was never abused and operated well within its design limits. Not sure what caused it to start leaking into the catch pan and out onto my laundry room floor.I purchased the tank at Lowes and went for the longest tank warranty to reduce replacement intervals. I sent Whirlpool an email on 1/22/2012 explaining my problem and I referenced this site. The next day 1/23/2012 I receive a call from Whirlpool (Chris) asking me about my problem. I explained again and they gave me an RMA number and told me to go to Lowe’s and they would replace my hot water heater. I went straight to Lowe’s customer service and within an hour I was on my way home with a brand new hot water heater. Thank you, Chris, Whirlpool and Lowe’s. I am very happy with my outcome on this issue.

Bought a Whirlpool Cabrio washer from Home Depot. It started making noises on the spin cycle 2 months after the purchase. A technician came out and concluded it was a clothes hanger behind the machine making the noise. False. Two days later I tried to wash a load. All the panel lights came on. And then the machine died. No power. The tech came out and tried to run tests but the machine would not respond correctly. Informed it has a bad control. The machine will malfunction even if a button is pressed too long. And then its repairman time again. This machine is poorly designed. No doubt whoever designed the digital control panel did not think about ease of use. The tech has to recalibrate the controls after every failure. Whirlpool and Maytag have put out a bad product and this will be my last.

Bought a Whirlpool Gold model GI6SARXXF04 less than two years ago and have already had three problems. The first was a faulty main water inlet hose that dumped water all over the kitchen floor. It was still under warranty so I didnt have to pay for it. Now have two additional problems. About two months ago there was a puddle of water under the refrigerator every few days. I finally figured out it was ice build up in the bottom freezer chest that melted that caused the water leak. The second issue is that the ice maker just stopped working. It had been working great this whole time and then suddenly it just stopped making ice. I contacted Whirlpool and they will cover the repair for the defrost issue but not for the ice maker. Gee, thanks, way to backup your product. Im guessing the reason they dont backup the ice maker is that its probably the more expensive repair. Like many people here I also will never buy another Whirlpool product again, regardless of what it is. Theyve shown me that not only do they produce inferior products, they also arent interested in customer satisfaction.

In the last 6 years I have had two refrigerators each lasting three years with major repairs from day 1. I am on my 6th repair for my Whirlpool Model WRF89SDAM02 purchased in October of 2013. WHAT A PIECE OF JUNK.

I purchased a Whirlpool Dishwasher, model DU1010XTXB1, 13 months ago and now it wont drain nor come on. Interestingly enough, the company claims no fault and wants to charge $129 just to diagnose it. This product has never worked properly, happens to have recalls for the exact same model number, yet wont acknowledge or expand its serial # coverage despite that it is the same exact problems! Do not buy from Whirlpool!

My new fridge is extremely hard to open. The technician that was sent out told me that there is too much suction building up inside the fridge and freezer and that is why it has to be yanked to open. This is not only annoying it means the fridge is constantly being pulled forward out of place. Technicians solution was to deactive the castors under the fridge. At the time he was here I did not realize that I could then no longer move the fridge out of its place to clean. I called Whirlpool and complained and was told that they could do nothing more for me because the fridge is in good working order. I hardly would call this good working order. They also informed me that if I wished to clean under the fridge or the coils at the back it would require a service call to move the fridge and I WOULD BE CHARGED EACH TIME. Needless to say I AM VERY, VERY UNHAPPY WITH THE WHOLE SITUATION.

This diswasher is streamlined and elegantly desiged for any kitchen. It stays externally clean with easy to wipe surfaces. Easy to use controls on the top of the door that cannot be accidentally hit when walking by the item. Plenty of internal space for lots of dishes. Internal silverware rack is easily removalble and not in the way of dishes. It is extremely quiet when running, like a soft hum in the air. A real "bang for your buck".

If you like having to use a funnel to refill plastic water bottles, and enjoy ice splashed all over your kitchen floor then the Whirlpool Gold refrigerator is the model for you. The problem with ice is if you dont have your glass sealed up to the ice dispenser it will shoot ice out over the top of the glass, and even if you DO do that when you try to remove your glass to cut off the ice supply it continues to disperse ice everywhere. TIP: The only way to more efficiently stop ice from spraying all over your wood floor is to do this: When your glass is full of ice, simply open a door on the refrigerator. That IMMEDIATELY stops the flow of ice OR water. Works great, and its the only way to deal with this horrid design flaw in this product....

I came back from vacation and found a sheet of ice at the bottom of my freezer, just like that lady from SC and some vegetables frozen in the vegetable bin; not very happy. Have not contacted anyone yet, but I’m very unhappy about this situation. This refrigerator is less than 2 years old; I’m afraid of putting anything in this unit as it is very undependable.

Ive owned the microwave for 2 years, and recently the DOOR AJAR alarm goes off whenever I try using it. The appliance is now essentially unusable. I wish I knew about this known defect before purchasing. I spoke with Whirlpool Customer Care, and they want to charge me to have someone come fix a known defect. The charge is more than what I paid for the microwave. Please avoid Whirlpool at all costs!

My family purchased a newly built home from a reputable homebuilder on December 21st 2019. On the first week of January 2020, we noticed that our upgraded Whirlpool dishwasher, model #WDT730PAHZ0 was shutting off mid cycle, resulting in dishes remaining dirty. The technician gave us an estimate of nearly $500 for replacement of pump motor assembly. He also informed us that this particular model is well known for having this defect. We are requesting that Whirlpool stand behind their reputation for producing reliable high quality products by replacing our dishwasher.

Every one of the knobs cracked where they engage the gas valve. One gas valve came loose from the manifold creating a gas leak discovered by the propane company on a system leak test. Screws came loose that hold the tracks to the base for the slide out bottom drawer. The AquaLift cleaning system is useless. Better buy some oven cleaner and rubber gloves. Very disappointed! One star because 0 isn’t an option.

Replaced the “brain” twice. No hot water for 2-4 days each time, waiting for part to arrive. Now I have to replace the nylon drain valve because it won’t shut off. Gonna use brass replacement. Fortunately I have it drain to a sump pump so house isn’t flooding. Don’t buy Whirlpool water heater from Lowe’s unless you enjoy this kind of thing. Consolation: the folks at the help line always answer the phone and are knowledgeable. And they’ve heard these same complaints over and over. One guy even said to buy AO Smith as they are made in Tennessee instead of China.

Stainless steel, easy to adjust, cools very well installed in a RV instead of standard RV fridge. Took a little bit of carpenter work to make Whirlpool fit but well worth the effort. The only problem I have with the fridge is that whirlpool wont honor the warranty because it is installed in a RV.

We bought this Whirlpool he washer two months ago, and it is the most aggravatingly frustrating washer weve ever had the displeasure to use. There are times when it washes just fine, but I always have to put the mode on deep water wash because the normal mode uses very little water (like its supposed to) but it doesnt clean the clothes. However, most of the time it doesnt wash at all. All the lights will turn off and youll hear this sound and itll drain the water without having been in the wash cycle. Worthless piece of equipment! I prefer the old washer where I have more control. Whirlpool used to be such a good brand, What Is Happening? The new design for their washing machine nowadays generates a lot of complaints, and with good reason (because they suck).

I bought a new top loader Whirlpool washing machine. Water would not drain enough so that the clothes could be dried in the dryer. It does not have the thing in the middle that you put your clothes around. My clothes get tangled together all the time. A repair person came and said that I needed to load the clothes in a different way. Different from what the salesperson told me. Still tangled and still not dry enough to put in the dryer. I have to use the drain spin cycle every time!!! My dryer still takes 120 minutes to dry a load!!! Second repairman comes and tells me I need a new computer system and I will have to use the laundromat. A month later they tell me they cannot get the computer and will replace the machine which is still brand new. Bring new machine and my clothes still will no spin enough so that they are dry enough to put in the dryer!! So sick of this and will never buy another Whirlpool product again!!!

Whirlpool Cabrio washer (WTW6400SW2) - After a few years of working, my washing machine lists a code of F50 and will not spin. After three visits from a repair company, they couldnt fix it and said we need to buy a new one. It seems like an electronic problem, but we have to replace the whole machine. Consumer Reports says a machine should last 10-14 years. Numerous people online have stated the same issue with the same model. More than one person stated there is already a class action lawsuit on this machine? Please help. Who can afford a new expensive machine after a few years of service?

Our whirlpool gas range has a defect - the material around the control panel is peeling and flaking; it is not possible to clean it and it is likely going to get into our food. It has not been cleaned with anything harsh - I use warm soapy water or stainless steel cleaner. I use the same thing on my other appliances and they look fine. I am waiting for a tech to come and look at it but after reading other complaints I fear that they are going to say it is cosmetic and it is not covered. Sadly, we can no longer wipe the control panel if it is dirty because the stainless steel is flaking off and it gets all over the burners and I am concerned it will get into our food. I am willing to bet the paint that is flaking off is not approved for consumption.I wish I had our old Frigidaire Gallery Series range back. I regret replacing it. Whirlpool was not helpful. They told me to contact the place I purchased it. The place I purchased it said it is a manufacturers defect. Someone suggested painting it with stainless steel colored spray paint which sounds like it is going to look awful. The new panel is $148 but it will need to be installed and if there is a defect how often will I have to replace it? I am very disappointed.

The washing machine (WFS10055CD) was working fine until two months after the warranty period...It worked the night before, but in the morning, there were no lights. I emailed Whirlpool, but I received no reply. So, I called their number to ask if they would honor their faulty product JUST out of warranty...They wouldnt accept this...I live in an area with no service agents for them so I would also require freight costs of 1,000 km away...I have had an electrician examine the unit to find it may be the control panel/mother board...seems funny many issues with Whirlpool machines JUST out of warranty!!!

We have had our catalytic oven explode into millions of hot pieces again for the 3rd time. Contacting them they sold me an extended warranty which Im trying to cancel and have been trying since 30th Mar to contact on ALL of their lines. It is permanently on hold or engaged. This company should be avoided at all costs. If you work for this disgusting company DONT!! You will be out of work soon! It is unbelievable how bad they are at responding to their (now ex) customers. What the hell are we in the EU for when a supposed UK co is Italian and they never respond (AKA 1940). Ludicrous! Incompetent! Stupid! Totally without comprehension. Do NOT buy ANY INDESIT or HOTPOINT products EVER!!! They are dangerous and you will NOT get any help to put them right.

I purchased this washer about a year ago and have been dissatisfied with its performance since Day One. It takes a long time to run a cycle and has not saved me any water or electricity. I always have to add a second rinse because it doesnt get the soap out (using the recommended detergent) with the regular cycles. Sometimes it doesnt get my clothes clean.Today it tore huge holes in the front and back of one of my very favorite T-shirts, which was a very meaningful gift from a very good friend. This was due to its tangling the clothes even more tightly than it usually does; the tangling process was what tore the material. I always take pains to load the machine in the manner instructed, to put the clothes in loose balls around the outside of the drum, but nevertheless it can take me several minutes to untangle my laundry before I put it in the dryer (also a Whirlpool -- just waiting to see how it disappoints). If I had read the reviews here before I selected my new machines, I would never have purchased the Whirlpool washer or dryer. I certainly never will purchase Whirlpool machines again.

I purchased a gas range with JDR8895 last 09/06/2007 at Home Depot in Metro Denver for approximately $1700.00. I will make my final payment on my Home Depot account next month. I was preparing dinner last September 10, 2011. I had the pans on the cooktop, one on the right rear and one on the left front burners. This was the set up because the right front burner has stopped working some time ago. Both burners were on a low setting as I was simmering pasta sauce and just warming water as I was later going to boil it for the noodles. I was in my living room when I started to smell something odd. When I approached my kitchen, there was a fire coming from the rear of the cooktop and beneath the three burner knobs. It smelled like an electrical fire. I immediately turned off the burners with my hand wrapped in a towel and started putting out the fire by hitting it with the towel and blowing. The towel caught on fire. I grabbed my fire extinguisher and was ready to spray when finally, it looked like it burned out. The smell in my home is terrible, when I tried to test the lower burner it looked like it was catching on fire underneath the knob as well, so i immediately turned it off and batted it with a towel. Im not sure what happened here. I will make my final payment on this range next month and had the previous range in here since 1977 and that still worked fine. I spent a small fortune on this Jenn-Air, only to have it catch on fire that could have potentially burned my house down.On various web sites including consumer affairs, JDR8895 has many reports of fires. If this is a known problem, why has it not been addressed as a recall? My 9-year old was making soup the day before while I was in the living room. This could of easily happened to her! It is a very dangerous situation to put your consumers in!Whirlpool Corporation contacted the appliance repair company, Columbine Appliances, to inform them that they would only be covering the cost of their visit and not the cost of the parts to be replaced in the range (the ones that caught on fire). Through Columbine Appliance, Whirlpool wanted to inform me that this is not a safety hazard and that it was my fault as I got water in the control knobs. This is not true. If I did, I was not aware and was unable to find any literature about that being a safety hazard or that it could cause a fire. I have found and have forwarded to the CPSC many instances of this exact problem, often when the range was not even in use and are happening to other consumers. I am working on combining the data, contacting the other consumers and have since refused service on the range by Columbine Appliances. Whirlpool only tried to contact me after I left them a message regarding the status of the range and that I had no interest in paying for what I viewed as a defect in their range and a safety hazard. I found a news story of this range going up in flames. Its unbelievable that this company continues to stand behind this product and blame these fires on the consumers actions. I am disabled and have an oxygen machine in my home. I have no desire to have this unit catch on fire again and potentially die, especially since water does, on occasion, end up on cooktops. Thank you for your time and attention to this matter.

Do not ever buy a Whirlpool refrigerator. Sloppy construction, bins dont close, doors dont seal well and a brand new fridge doesnt cool to a safe food zone. When we call for service, I got the run around for almost 2 hours. They wont be sending anyone to service a brand new unit for an entire week... And thats 2 days before Thanksgiving! I have never had an appliance made this poorly. We dont have the space for a bigger unit, so thats why we bought this model. Size shouldnt impact quality!

The unit has performed as I had hoped. I wanted a quiet appliance that performed well, and could accommodate large plates and platters. I never put my knives, wooden utensils, pots or pans in my dishwasher so that was never an issue. I use 1 of 5 cycles available, 1 of 4 options available. Why use something other than hot water? The delay option is used often since I have a tendency to forget to turn it on, but I never let it run if someone is not home. The time left clock is also helpful, but dont count on it being really accurate. The start/resume, delay and cancel options are often used. I used the rinse option once with disappointing results. The silverware caddy is a little small, or my silverware is too large. I do not put any pots, pans or knives in, everything else fits fine because its a tall unit. So tall in fact, that the door comes out much farther than earlier units. Im still getting used to that. The front is brushed stainless with a black plastic control panel, nothing special here. My favorite options are delay and time left. Never have used the heat to dry option. We have low humidity and Ive never had the need to dry them immediately.

Our Whirlpool Duet Washer started sounding like a jet engine 13 months after purchase. We spent $800 on a washer and it started to get very loud during spin cycle. After reading several reviews online with other people describing the same problem, figured it was the bearings. $800 to do my laundry for 13 months kind of crazy right. It would have cost almost $300 for the extended warranty through Whirlpool. In order to have it repaired, the cost would be around $600 because the drum and bearings need to be replaced at this point. Whirlpool’s customer service was no help and pretended they had never heard of this problem. However, reading reviews online tells me otherwise. I can buy a new Samsung on sale for $623, so that is the route we will probably take. We feel extremely cheated by what was once a well-known, reputable company. We will not buy Whirlpool/Maytag again until they put more emphasis on quality products with a cost efficient, longer duration warranty plan.

I just finished a call with Sears Repair. I informed them that this was the 5th service call since purchasing this Whirlpool Cabrio washer two years ago. The washer simply does not work. It fails to complete its cycle; fails to spin; fails to drain; fails to fill; leaves clothes streaked and dirty, smelly, and dripping wet for me to wring out by hand. I purchased it because of my faith in Sears and its Energy Saver label. I often have to wash the same load 2 or even 3 times to get it clean; no more than 6 towels at a time. (It is a large capacity washer, but acts up most often when washing towels or jeans.)Im a retired teacher; and in my best teacher voice – calm but serious – said that I would like Sears to come and take it away, issue me a credit or refund, or I would proceed to file with the Small Claims Court. His immediate response was, I dont appreciate the threat. I carefully (teacher voice) explained that it was not a threat... it was information. Yes, Im angry. But more than that, I am so disappointed in Sears, a company that I have always been loyal to – no more. Time to leave childhood behind and wake up to the reality that this is not the same Sears Ive dealt with for the last sixty years. Now, I’m to drive 25 miles of country roads to a Laundromat.

After purchasing three gold series kitchen appliances in 2013 two months after purchase refrigerator failed. Whirlpool did not have a fix at the time. Told me I had to wait two months for a part to be engineered and then service to be scheduled which is not acceptable. They would not take back the refrigerator and give me a different model so I had to press Lowes to accept it back and they did give me a refund. I then had to purchase a different brand refrigerator which now I dont have a matching set in my kitchen.Then the dishwasher became part of class action lawsuit and now my gold series gas range is obviously damaged too. The control had the plastic panel is bubbling and it is split. Again after talking with Whirlpool customer service they refused to help with this at all claiming this is a cosmetic issue and it wouldve only been covered for 30 days from date of purchase. This gas range also has an aqua lift self-cleaning feature which does absolutely nothing. It does not clean the stove. You have to go into it and clean it the old-fashioned way with chemicals, gloves, mask and a scrub brush. These products are absolute junk and the customer support is non-existent. Do not buy Whirlpool products.

Whirlpool Refrigerator Model # GI6SARXXF 04 Ice Maker - About nine months after purchasing this unit the ice maker began to stop working. I researched what the issue might be. During this time, the ice maker decided to begin working again. This occurred again about 15 months into ownership. At 19 months into ownership, the ice maker no longer works after approximately 5 weeks. Whirlpool will not allow me to purchase an extended warranty. I was told by a CR on the phone. However, she did offer a Repair +1 service contract that cost $345.55. I advised the CR that on the Whirlpool website, I was offered an extended warranty for 2 years for approximately $165.00. After waiting for her to check into my claim of being offered the extended warranty for about 10 minutes, she came back to advise me that no existing issues would be covered. In other words, my $2000.00+ Whirlpool refrigerator is so crappy that Whirlpool only offers a 1 year warranty. And unless I pay $345.55 and/or a service tech charging $129 for a trip charge only, I will not have a working ice maker. Additionally, the capacity for ice storage is extremely small, even for my 2 person household. At times, the ice comes out crushed even though the setting is for cubed ice. The ice shoot is great for taller glasses, but if trying to use a shorter glass, watch out! You will have ice all over your floor every time!

I bought a portable Whirlpool dishwasher on Jan.16 2016. We didnt buy extended warranty. After all, it was suppose to be new, should outlive us. It wont drain, my husband took the top off to see if he could fix it since I was told by Sears that no repair person is available in our area. I am only 10 Km from Saint John N.B. He found he couldnt take the front or back off, its all one piece, he is 84 years old. Under the top, it shows different colored screws, which tells us it was a used one or had been re-conditioned. I am very disappointed in Sears, have been a customer for many years. Everything in my house is Kenmore except for the dishwasher, only because they had no Kenmore. I might add that it wasnt used much. Its just two elderly people and only used when we have company. I cant afford another one. I bought this one from 1,000.00 I won on Lotto Max. I am so upset about this. Appliances should last longer. My Kenmores have.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I purchased a Whirlpool Flame Lock gas water heater with a 12 year warranty from Lowes in November 2011. It lasted almost 6 years. Called Whirlpool Support and no one in my area is a certified repair facility. Closest one is 45 miles away, and he wont drive up to check out my water heater because Im too far away. Called someone in town. He came out, looked at it for 2 minutes, and said he never saw a water heater like this, but Sears may carry parts. Charged me $50 for service call. Sears couldnt find the model number in their parts catalogs. I dont have a manometer (What is it?) so I cant do diagnostic tests on it myself. Cant find out anything about them online except complaints from other steamed customers about this crappy product. Whirlpool Support wouldnt do anything else for me except say they were sorry I got stuck with a bad product of theirs. It was made for Whirlpool by US Craftmaster Water Heaters Co.

IM OLD AND DISABLED WOMAN. Bought a brand new $800 Whirlpool top loader washer and it wont work after not even a month. Called whirlpool and had the worst customer service from Tammy. I have to wait to compose myself to call back cause the washer is junk... F9E1 SENSOR. IM NOT A MAN! Worst customer service. Thought my washer would last longer. Its been 1 hour 45 minutes. Wont turn off. I CANT unplug TAMMY! IF I COULD I WOULD!

Since buying a Whirlpool Cabrio washer about 3 years ago have had several breakdowns. Within 6 months the computer completely failed. Since then it failed again. About every six months it costs me around $125 to get it running. The thing is a piece of junk. If the load is slightly unbalanced it just shuts down during the spin cycle. The old Maytag we had ran for over 25 years with the belt replaced once. No other problems. Will not buy another Whirlpool again.

We are doing a kitchen remodel and I found the best price here. I was a little skeptical to order a range online, but I did go look at the exact range in the store and decided I would give it a try. I received email updates about the product and during delivery, I received 2 calls.... one to tell me approximately what time the range would be delivered and another when the driver was about 20 minutes away. All around good service.

I bought new hot water heater. I installed it did and it did not work. I called them, and they sent a new part. A service man installed it, and it still did not work - he was unable to get it working. They said my gas supply line 1/2 od was too small. I had it replaced to 5/8 od 1/2id, and it still did not work. I called them again. They offered to send more parts and try again. This is a brand new water heater, never fired. I asked if they would give me a ra number so I could return it to the store. He would not give it to me. He insisted he send some one out to try to repair it. Meanwhile I have had no hot water for 2 days. He told me do what I have to do and hung up on me. So I removed the heater and took it back to Lowes, where they were glad to give my money back. But still, I lost a day of work and paid the gas yo bring it back. I went to home depot bought a GE hot water heater. I had it installed in about 15 minutes and it is working fine.