I purchased this Deep Cabrio Washer and Dryer a year ago. We moved into our new house and put in the new washer and dryer. During the first load in the washer, the spin cycle blew the ring right off of the hose and flooded our new laundry room and bedroom in the basement. My husband had to put a clamp on it to secure it. The washer does not wash the clothes, in fact you have to always wash it under Deep Water and wash it twice using twice as much detergent as you normally would. This washer is horrendous. My best friend bought the same one at the same time and she hates it just as much as I do as it does not clean clothes. Whoever designed this washer should be fired from Whirlpool. Im hoping through Nebraska Furniture Mart and Whirlpool I can find a solution.

Its very noisy, and there are no blankets to purchase to deaden the noise. The dishes all need to be dried by hand. Some of the dishes come out dirty. I would never purchase another Whirlpool dishwasher.

Whirlpool gold model GI6FDRXXQ06 - This fridge is 3 years old and we are about to put the fifth ice maker in it. Vegetables freeze in the vegetable drawer (yes, its set correctly). Our repairman even says the design is faulty but since the warranty is out, we have to keep replacing the units!

We been having the same issues as all of the people that have consumed the water heater. We have replaced the pilot more than 3 times and other parts of this water heater! Well, we are a family of 9 and the only way we can shower is by heating up water like everyone that has the same issue.So I would never recommend this (Whirlpool) water heater to anyone!

In August of 2013 the lid on my Whirlpool Cabrio, model #WTW7800XW0 simply fell apart. This washer was purchased from Lowe’s in Live Oak, Florida on August 23, 2010. Lowe’s put me in contact with the authorized repair service, A&E Factory Service. The A&E technician arrived and told me the hinges were the cause of the lid breaking apart. He ordered a new lid and new hinges. When the lid and hinges were delivered the technician came back to my home and looked at the hinges again and said they didnt look that bad so he didnt bother even opening the box with the new hinges. He just put the new lid on and said I shouldnt have any further problem. The total cost of the new lid, hinges and service call amounted to $385.50. Well, here it is - not even a year later and the same problem is back with me. Yesterday (July 23, 2014) I was doing a load of laundry. When the load was complete and the lid lock turned off - the lid actually sprung upward and now the lid wont close. It seems that Whirlpool is fully aware they either have a design flaw of defective lids and they are gouging the customers for their errors. The Cabrio model is supposed to be top of the line - certainly not a cheap machine. I was, at least, happy with the performance of this machine cleaning my clothes properly but this lid problem is ridiculous. I do not plan to purchase any Whirlpool products in the future if they do not make things right by myself and hundreds of others with this same problem.

I would not give this any stars! I purchased a Whirlpool gas range (model #WFG371LVB1) just 2 years ago at Lowe’s. The oven heats up to 475 no matter what temperature it is set at. The Whirlpool authorized service agent said it needed a control board which would cost $650 to install. The repair company found one for less--only $300. After reading all of the other complaints about these ranges, weve decided not to repair it and will probably have to replace it soon. We have been Whirlpool customers for years and will not purchase another Whirlpool product. There should be a recall on any of their products that have these continual problems. The oven cannot be safely used for normal baking.

I purchased my Cabrio washer from Lowes 4 years ago. I noticed the smell and researched issues online. Suggested using the cleaners made for tubs. Im tired of the smell. I had repairman tear apart the washer. He told me they put water in the tub for balancing. Really... the tub is made of plastic. Will never buy anything Whirlpool again.

I purchased a Whirlpool accubake oven in 2010. The repairman has been out to repair it 5 times. Thats right 5 times. It wont maintain the baking temperature. They have changed the mother board, the ignition switch, the harness, and the thermostat. Every time the repairman leaves it works and then I go to bake something and it doesnt. Once it reaches 350 degrees the oven cuts off. You can hear it trying to ignite but its like the fire doesnt catch. I have to shut it off, press bake and heat it up all over again. This is so annoying. Bad thing is I like the look of the oven but clearly this is a shotty product. I will never buy a Whirlpool again.

I had the junky gas water heater for two years and cant keep the thing lit. Calling Whirlpool does no good. They give you the runaround; the store cant do anything. They know they have a faulty product and keep selling it. Some companies are only out for the money. If that wasnt the case, they would discontinue the junk. They will send you replacement parts but if you know nothing about them, you have to put out more money for someone to come and fix it. I would love to send them the bill! I would not recommend this brand of anything to anyone.

In the first year of my Whirlpool Washing Machine, the motor quit working entirely. Fortunately, the machine was under a 1-year warranty and the motor was replaced by a Whirlpool service technician. My big complaint with this washing machine is this: Even though you select hot water for the wash cycle, the machine has sensors in it that only allow the water to get lukewarm. If it senses the water getting too hot, it adds cold water to bring the wash temperature back down to 78 degrees F. Next time I will do my research and buy a machine that actually allows one to use hot water.

My whirlpool refrigerator relay switch caught on fire and customer service told me that my model wasnt on their list of problems refrigerators, but they know there are a lot of units out with the chance that it could start a fire if anyone has a whirlpool product refrigerator. I would call 1-888-923-8502 and check to see if it is on there list to replace the switch.

I have used Kenmore products for about 50 years, so when it came time to replace my old washer I looked at Kenmore/Whirlpool. I upgraded to the top of the line. I had been warned by 2 service techs (2 different companies) that had tried to keep my old Kenmore alive that the new ones are not up to par compared to the old ones. The first very small load that I tried, was not even thoroughly wet when I took it out to put in the dryer. 1st service call, tech suggested that I put machine on extra water.That helped sort of. A few weeks later, wash is not getting clean. Called Whirlpool, they suggested getting the washer cleaner and clean the washer. Went out and bought a special cleaner, $10-12 and two cleanings later using the extra water and extra wash water I now was getting cleaner clothes. They said I would need to clean the washer every 2 to 4 weeks. I have continued to use washer but frequently have to rewash about 1 in every 5 to 10 loads as it doesnt always clean everything in the load. Called the Co., they sent service out, they said its OK!In Jan. We went out of town for 2 weeks. The washer had not been used for 4 days before we left. Came home to water all over the floor which are hardwood. Needless to say our hardwood is all warped! Service came out, ran the washer for about 15 min. and said it was fine, nothing wrong! Called Whirlpool again! Washer is now out of warranty. They said call a local service, out of their hands as it is out of warranty! Nothing more than they can do.I have used Kenmore/Whirlpool Appliances all my life and they have been wonderful. The new ones are garbage as far as I can tell. I have a Refer that is now 3-4 years old and I have had problems with that, a new dishwasher that is 2ish and have had service out on that one, now my brand new washer top of the line and it is so bad I am afraid to use it unless I am sitting right in front of it watching it! Further if you have the rinse cycle on the clothes come out so wrinkled that you need to get out your iron out and iron everything including sheets and linens. Lucky that I did not replace my old dryer! Do I recommend Whirlpool anymore? Not on your life. I wish I knew what to replace them with!

I used their website to schedule an appointment for an estimate for a repair on my oven. I was never told they were sending an independent contractor to do the repair nor that there would be a charge for the estimate. I contacted Whirlpool and was told there is nothing on their website and I should have asked the service technician before he was at my door if there would be a charge. Therefore, it was my fault and I indeed had to pay the charge when I declined to have my oven repaired. I paid an independent contractor hired by Whirlpool for $129 to give me an estimate on the repair to my oven despite never being told of such a charge prior to the appointment.

We purchased a Whirlpool over the range microwave WH32L19AS1 just over a year ago. {No we didnt buy the extended warranty.} We were reheating some food in the microwave at noon the other day and the microwave made very loud bang and started to hum really strange. We have since discovered the Megatron or something like that has gone out. Just parts $150.00. So we decided to trash the broken Whirlpool microwave. We did some googling and discovered that there is big trouble with this product.

Agreeing with many. How disturbing to buy a Cabrio Whirlpool washing machine about 5 years ago. I might as well go down to the river and wash my clothes. The bearings went out which means I have to be the spin cycle. I am hanging out my clothes on the line - very wet - until my husband buys the part and fixes it himself. I had my maytag for 25 years. An awesome, dependable machine that we laid to rest because of rust. We should have gotten another drum instead of buying this machine. Where are the engineers that are making dependable appliances to last a LONG time? We have not gotten smarter. Or we only care about the all mighty dollar. Make something to last a short time so that you have to buy again. We will do some extensive research the next time we buy a washing machine. Do not buy this machine!

From day one I was not happy with the new auto fill washer, I was told I just needed to get used to it! Well I have tried every cycle available and no matter what I try cloths don’t come out clean, using the deepwash cycle Sheets on top were still dry once cycle was completed!! Give me back my old washer! Washed much much better.

This washer (Cabrio 6th Sense Washer) is less than 4 years old and now needs $500.00 worth of repair. You have to replace the tub in order to replace the bearings. If your washer starts to make noises during the spin cycle, you are in for a big repair bill. I still havent decided if I am going to repair it or junk it. The towels always smell sour even if you wash them twice.

Whirlpool Cabrio - Clothes come out of the washer wrinkled, twisted and soap stained. I use the exact soap products they recommend in the proper amounts. Bought them in September of 2014. Wish I could return them. Too low of a water level that cannot be adjusted. Not fully rinsing the soap out of the clothes. Washing takes twice as long as with my former 25 year old washer. Dryer is new technology and energy efficient yet wont remove wrinkles from permanent press clothes.Uses hardly any water so clothes must be rinsed at least one or two times to get the soap spots off. Clothes always come out extremely wrinkled. Not all items can be put in the dryer so ironing is back in my life again. Some items come out so twisted and wrinkled that ironing wont even help. Dryer isnt much better at all and shirts and pants always have some wrinkles. Have had to bring some items to the dry cleaners to bring them back to a non wrinkled state. Whatever is saved in water and energy is more than made up by ironing and dry cleaning. The company representatives have sent service people out twice and they both said that the machines are performing as they were intended to. I do smaller washes and wash more often to try to get better results. I dont. Even though it is extra large capacity items such as blankets must be washed more than once as the water does not wet the entire blanket.

I purchased the French Door refrigerator only 7 months ago. It has been emitting a low pitched, loud, vibrating hum for days. I called the company and spoke with a well-trained representative who informed me that there needs to be a service call. When I mentioned that this did not indicate an acceptable situation for future dependability, I was pitched to purchase an extended warranty. Further… this company doesnt monitor Consumer Affairs. Quality and standing by a product are manufacturer qualities that were not evident during the call.

Purchased a new Whirlpool water heater from Lowes. Two days into the reset switch kept tripping, Whirlpool wanted me to wait for someone to repair it. Lowes exchanged it for me. When I called Whirlpool service myself, Jessie was in technical support could have careless about my business and was dismissive about any issues or concerns I was having. This will be my last Whirlpool product ever.

I called customer service line regarding my Cabrio Automatic Washer (Model No: WTW6600SW2; Serial No: CU2171019) purchased on 11/24/07, to report and ask for assistance with a chronic ongoing service problem. Several calls in the past and service visits (at my cost) did not rectify the problem. Although there are many similar complaints on this machine regarding the loud noise and resulting problems during the spin cycle that involve the tub and rods, the representative said So sorry or Too bad we cannot not help you.My machine now does not run and is less than 4 years old --just like every other report. I get an error message F which the representative alluded to something involving the electronics. Machines purchased in 2004 from Whirlpool have across-the-board similar problems that Whirlpool refuses to take ownership for. This machine is their top of the line model. I dont feel the financial burden of repair or purchase of a new machine should be on the shoulders of the consumer. We bought in good faith from Whirlpool and expect Whirlpool to live up to their responsibilities. Thank you for any help you can provide.Rae **

WE had a Kenmore dishwasher and it never got the food off without scrubbing the dishes first. We decided to get a new dishwasher after being very frustrated. We purchased a Whirlpool and noticed a difference instantly. It was quiet, got the dishes completely clean, (no pre-washing like before) and was overall a better fit for our family.

I have always had a whirlpool dishwasher and have always been please until my last dishwasher. The part that holds the soap and liquid stuff has broken and also the part that holds the silverware. Been really disappointed in this product.

Purchased range 10-26-12. Had 3 service calls first year. 1st time, it started. When service guy came a few months later, same problem. A new igniter was installed. 3rd time, another igniter was installed. My year warranty had run out but still had same problem. Asked for a new range, was rejected. Im afraid if burner is lit, had we try to start oven we are going to have explosion.

My washing machine is a front loader. Previously I would not have purchased one, but after using it for a year or so I have changed my mind. As long as I do not overload it my clothes come out perfectly clean using cold water, and partially dry so needing less drying time.

A factory authorized technician came out this morning and repaired the washing machine. The bolt had come off of the pulley, which then fell off and burned through the guard, and then burned into the insulating on the bottom. The technician said this happens frequently. All that needs to happen is to have a Loctite bolt holding the pulley rather than a plain bolt which comes loose with the vibration. All Whirlpool had to do was spend a couple cents more for the proper part which would avoid potential fire! I should not have needed to have had my home put at risk, needed this service call or pay all that extra money because of their poor workmanship and design failure. This should be a recall item, and all costs incurred by the consumer should be covered by Whirlpool.

We purchased our 4 French door refrigerator on 1/22/15. It started making a loud noise, like an air compressor. It continue to get louder and louder over a period of a couple of days. Called the dealer where it was purchased and a repairman was not available for another week. When the repairman showed up and diagnosed the problem which was a leak in the freezer causing ice and the fan to hit the ice, they were not equipped to fix that type of problem. We were advised to call Whirlpool consumer dept. which we did, and was advised they would send out another repairman and would be another week. Have had to move food and freezer items out of refrigerator. Two and one half weeks and no solution. Five month old refrigerator that is not usable. Very disappointed in product and service.

Purchased I assumed a brand-new electric hot water heater from Lowes. It worked giving us hot water for 5 months then it quit. We called the number they have located on the side of the water heater and they sent 3 references such as plumbers for us to contact because everything they told us to purchase didnt work... so after their references, plumber came out. Instead of him telling us what was wrong why all of a sudden we stopped getting hot water he didnt return our phone call. As a professional that sucks!!! So WHIRLPOOL CUSTOMER SERVICE says the hot water heater that had been working for 5 months wasnt up to code and wasnt wired right and WE need to pay an electrician to connect it right... thats **. The electrician did it correct the first time. Whirlpool just dont want to accept the fact that their equipment is faulty!!! But thats good because I will NEVER purchase anything WHIRLPOOL makes. I dont care if they start making water. I will just quit The hell with that company!!! WHIRLPOOL SUCKS!!! Heres the serial number 1626103174130 and if I had read the neg reviews before I purchased the hot water heater I wouldnt not have done it!!!

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

I just bought a Whirlpool 50-gallon water heater from Lowes because my old one took a turn for the worse. I brought it home, installed it just as the directions said, and immediately got an FVS fault detected code as soon as I plugged it in and tried to ignite it. This is by far the worst experience I have ever had with an appliance. And wouldnt you know it whirlpool service center is closed on weekends. What an absolute piece of trash. Im draining it and taking it back ASAP. Lowes and Whirlpool just lost my business for good.

On its 1st year, the water pump went out. It cost $200.00 to replace it. On its 2nd year, the circuit board went out, and it took $300.00+ to replace it. On its 5th year, the bearings went out and cost $250.00 to replace it. I bought this for $900.00, and I already have paid $750.00 plus the price of purchase which makes this washer $1,600.00. Whirlpool should compensate all of us who have worked hard and have purchased this product! I will never purchase from Whirlpool again. I can’t afford them. I should get a refund from Whirlpool. Don’t they care? Email me for these problems at **. I am so dissatisfied with this product.

I bought my Cabrio washer about 3.5 years ago. Little after the year, I had to replace the lid because the hinge broke. Then came the F1 code, which I noticed if you turn the machine off for a couple of minutes, it resets itself. About a week ago, it started making a grinding noise and staining the clothes with oil or grease. Transmission problems. I was told by the seller it had a 10 year warranty. I called them up and now I got to foot the bill for a technician to come to my house and tell me what I already know plus labor. Might as well buy a new one. Beware because I believe Kenmore is manufactured by the same company.

We purchased a Whirlpool refrigerator (Model WRB322DMBM00) in April of 2015 from Lowes. Within 5 months rust stains started to form at the bottom of the top door and the top of bottom drawer. RUST STAINS!!! We do not live in a humid area or near the ocean. It is a design flaw I believe in the gaskets. I called Lowes first for their guarantee but they said it was cosmetic and not covered. Then I call WP customer service and they are sending new doors. Thats fine but its going to happen again. I requested slate instead of stainless steel but they wouldnt do it. Plus finger proof is a joke (monochromatic). Very dissatisfied customer.

I have to say I am taking the time to write a review for my Whirlpool Cabrio Washing Machine since Ive never been this dissatisfied with a product. Every time I wash my brand new expensive black dress pants, I have resulting white marks all over! Im so upset! I washed one load three times with no soap at all just to remove the marks present! At this point, I will never buy another Whirlpool product. =(

WRF993FIFM00 refrigerator is a LEMON - I bought my $3000 refrigerator just after Christmas. In seven months, it has failed three times and I have been without a refrigerator for a cumulative 7 weeks so far. Each time it failed, I lost all my food, (but not until after wed been eating compromised food). If you buy a fridge, I strongly recommend getting a thermometer, because we learned the hard way that these Whirlpool units can just stop cooling properly and you wont necessarily notice that it is above the FDAs recommendations for food storage. Anyway, after each call they will make an appointment a week or two out for a tech to come out, who then orders the parts that take weeks to come in. Now, my third service call in and the SAME PARTS have failed again and I am again without any refrigeration and they have no idea when the parts will be in. This has been an awful experience, and Whirlpool could not care less. DONT buy their products, under any of their names. IT IS TIME FOR A CLASS ACTION LAWSUIT. Too many folks have spent a lot of money and have been burned by Whirlpool, not to mention becoming ill from improperly chilled food!

Our Whirlpool Cabrio Washer is barely over one year old, and its getting increasingly louder (I cant hear the TV in the other room). I researched this issue and found this is a common problem with the upper and lower bearings. Check it out on YouTube; its easy to find. Whirlpool should buy these back! Is anyone aware of a class action lawsuit against Whirlpool regarding these pieces of junk?

As with other posts here, the rear bearing is going out of Whirlpool Duet front loading washer. I purchased mine in late 2008. Moderate use always according to recommendations. I called Whirlpool and same story--no recall and it would be expensive to have it repaired. I cant see putting $400 to $500 in parts even if I repair it myself. I cant believe that with such a common problem, Whirlpool wouldnt either honor a repair or offer a reasonable bearing package to fix. It requires the entire back, half of a new drum. Poor design, but whats worse is no effort by Whirlpool to rectify the situation.

We purchased this microwave from Lowes. It already had a cracked handle but I wanted to change my appliances to Stainless and it was very cheap. I could just order a new handle and we would still be saving money. I received the new handle and it was very difficult to install, but I did it. Not even 2 months later, the same thing happened to this handle. We thought Lowes had somehow broken the original handle, but after reading all the other complaints, I realized that its a manufacturer problem. Last night, I was cooking on the stove and the plastic from the handle fell into the pot. I had to throw the whole pot of very expensive, and time consuming meal away for fear of eating the plastic.

I bought Whirlpool gas water heater on July 2009. It keeps going out. It is not working. I found out you cant even get parts for fixing it. The dealers told me its junk. I was told to buy a new one. Then, I found out its been in class action lawsuit. How did I get to buy it after it was recalled? I dont know what to do.

Favorite feature is the double oven. Both ovens are separate self cleaning. Top oven smaller, perfect for a pizza, cookies, small stuff. Great features for entertains, multiple foods can bake at same time. Ceramic top easy to clean, boil overs cannot seep under anything. I have had this oven for over 10 yrs, minimal repairs.

I bought a semi automatic washing machine from Croma Store (Gurgaon) on 03/09/12 Model no A-72H* and I regret to say that the water direction changing knob (to change water flow from agitator to dryer), has broken. The machine is not even 4 months old and the water inlet is broken. How can this happen in a brand new washing machine? You claim to have durable home appliances products and your machine does not last 6 months? Can you see that the broken piece is attended to or replaced at the earliest?

I bought a new Whirlpool electric range in the spring of 2008 and purchased the extended warranty from Leons. The oven worked fine for the first three & 1/2 years, but then the bottom element in the oven seemed to have stopped working. The top element would still come on, in an effort to keep the oven at temperature, but was not effective.I called in a repair. The technician showed up, turned the oven on, noted that the bottom element did not come on properly & replaced the motherboard in the control panel with no further diagnosis. The oven worked for approximately 9 months and then the problem recurred. I called in another warranty repair. This time when the technician showed up, he turned the oven on & told me he was going to order a new bottom element, which he installed about a week later, again, with no further diagnosis.Now, here we are again, one month off warranty and 6 mos since the last repair, and again, the bottom element in the oven is not working correctly. I reported the issue & my dissatisfaction to Whirlpool and was basically told, How sad, too bad - hardware components fail and theres nothing we are going to do about it. Seriously? This range is just barely 5 years old and has a history of repeated problems with the bake function - obviously, something is defective in this product.I can see it, if I had not had any problems until this point, but when the same issue keeps coming up & obviously has not been correctly diagnosed and repaired, I would think they would have enough integrity to offer some kind of help or solution. Given the history here, its highly unlikely that Im going to be willing to spend big bucks on another attempted repair that, in all likelihood, will be merely a short term band-aid, so Ill probably have to buy another new range - which I cant really afford right now. Trust me, it will not be a Whirlpool & it will not be from Leons.

I bought a Cabrio washer. Since we bought it, I have had to fix it. The machine is a piece of junk. It looks nice though. After 5 technicians later, our piece of junk is still having problems. We are a poor family with 3 kids who struggle to make ends meet. I feel that this company has taken advantage of the people who put their trust in the so called American company Whirlpool.

My agitator-free washer began tearing small holes in my clothing and sheets about one year after purchase. I contacted Whirlpool and they sent out a service person, who ran a diagnostic test on the washer and said it was fine and I should learn how to wash clothes and load the washer, etc. The barrel of this washer has little holes and I believe that when it spins the clothing, some pieces may stick in one of those holes causing tearing. The service person also told me that my clothes were old. I guess that means this washer is not for washing old clothing. The tears in my clothing are in places that are very unlikely to tear, like the back of my jeans behind the calf of a leg, about half way up from the ankle. There are holes in my tee shirts at the bottom of the back. Even if I were a smoker, which I am not, I would not likely burn holes in those areas. Whirlpool obviously does not want to accept responsibility for this problem, even though there are many other people having the same problem with this type of washer.

I decided to buy the Cabrio. It was the most expensive, but I wanted to buy American, and I liked the set. It does not do great with cleaning the clothes and they smell when they come out of the washer. Do you have any suggestions. It does not fill with enough water even when using the deep water mode. Please help as I would not recommend this. I called Lowes where I bought it, and they said they knew, but are not recalling, or making any adjustments until Whirlpool does.

I purchased a Whirlpool French Door refrigerator (G16FDRXXY07) from h.h.gregg appliances and electronics in Columbia, South Carolina, on August 3, 2012. It was delivered and installed on August 11, 2012. It functioned well for three weeks, and then temperature of refrigerator dropped to 25F. Vegetables and eggs got frozen. I made a service call to Sloan Appliance Service as soon as I was aware of the problem. In the 3rd visit, the thermometer was replaced after troubleshooting. After replacing the thermometer, the temperature of the whole refrigerator got higher than it was supposed to be. Refrigerator got around 53F, and freezer got 34F. All foods in the refrigerator got spoiled. In the past six weeks, the company sent technicians to my house to check the problem, and they tried to fix this refrigerator for 5 times. The situation got worse and worse. I have not had a functional refrigerator for 6 weeks. A technician came with a compressor on 10/22/2012 to see if replacing it could fix the problem. When he cut the copper pipe, he found that refrigerant was leaked out. There is no refrigerant at all. He refilled refrigerant without changing compressor. Because he thought the leak was slow, it should be caused by the evaporator. He thought it should work and last long enough when a technician comes back with evaporator replacement. It turned out what the technician thought was wrong. The temperature of both refrigerator and freezer did not drop to normal, 53F/34F. The problem persists. I called Whirlpool customer support line several times. The response I got was that Whirlpool would not replace for having manufactured a faulty appliance during manufacture warranty. They can only keep sending technician onsite to check and repair. For 6 weeks and 5 times onsite visits/repairs, this newly purchased refrigerator still does not function.

We have had our range for over one year. The main problem is that the large burners are in the front and the small burners are in the back. This means that when we are using the two front burners we cannot access the rear burners safely. (What country provided the engineering design for this?) One minor problem is that we cannot get used to the burner control arrangement. The outside controls control the front burners and the inside controls control the back burners. Our old range was the right control for the back burner and the left was for the front burner. Another small problem is that there is no back to the pan drawer. So, with the drawer full if a pan move when the drawer is shut it will be scraped off the drawer and fall into the back and becomes hard to reach to remove.

When I first got my energy eff washer it would not fill up with water. Only about 7 inches or so. Then I read that is you wet some clothes first it goes on wait before it starts. Works excellent with the agitator. Have done clothes without detergent and everything comes out clean. My beef is there is no lint trap so rely on the dryer to get rid of it.

I bought a glass top stove model number W10221843A. My son dropped a plastic cup on the top of the stove. It put a hole and shattered it. Now remind you, it was plastic. I barely use this side of the stove, so not like it was weak. I paid a lot of money for this product just for a plastic cup to destroy it. Is there any recall on this stove? Any help will be appreciated. Thank you.

I have been using this brand for many years. My first washer lasted for 30 years..so I will stick with what I know is reliable. It is a great machine. Very simple. I dont need anything fancy. 3 different cycles to choose from.

I bought Whirlpool Proton 3-door 18 months ago from a popular store at Chennai. I got a problem with cooling within 2 months. Service was availed and it got better. Same problem occurred again after 3 months of service, so I had it serviced again. Now the problem is its not working at intervals. I called the service and the person could not find any issues and says its working well. While it was pending resolution, the problem recurred and refrigeration is nil now. At the freezer, even after 8 hours, the water has not turned into ice and all food products have perished.

My fridge is less than a year old. Ive had issues with the part where the ice comes out to fill the trays. Now, I have no ice at all!! My product is less than a year old and this will be the third time Ive had to have someone out to fix it. I called corporate to ask them to stand by their product and ask them at what point they would just replace the whole fridge! The girl I spoke to never once said, Im sorry for your inconvenience! I now have to go without ice for a whole weekend and again wait around from 1-5 p.m. in Arizona with four kids to have ice!!! NOT HAPPY AT ALL!!!

My new Washing machine was to be energy efficient. Yes, It uses less water to wash a load of clothes. Problem is, it takes twice as long to wash a load of clothes as older models. If it uses twice as much electricity, In what universe can this be considered energy efficient?

Purchased washer and dryer combo on 07-08-2013. I have a family of just 2 now. Under normal conditions I thought the machine should last 12 to 15 years. After 2 years of service the bearing and seal on the tub failed, I had to order parts and rent a tool to install. Then after 3 years had to replace suspension kit for the tub. Now after 3 1/2 years the water drain pump has failed and the sensor on the motor is acting up. This machine listed for $800. I did not purchase extended warranty but I have repaired myself. If I had not repaired myself the cost would have exceeded the cost of new. I have now purchased another makers model machine. I think Whirlpool should buy this machine back.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

My mother has had this stove (Whirlpool Accubake) about 3 years. She does little cooking. On June 24, 2015, herself clean activated, probably for a few days, this is normally 850 degrees. She is 84, does nothing with this stove, certainly not knowing how to hit the clean button and HOLD the Start button for 3 seconds... this caused the stove to billow smoke out of the oven and encompass her entire home. No fire, but was caught in time. The fire department had to pry open the door as it would not unlock.

Purchased Whirlpool Duet wfw9550ww00 in 2012 from PC Rich, who purchased machines in 5/11. Product stopped being made 5 yrs prior. Of course I did not know until my washer went and had service come to my house. He explained prior information, looked at my machine for 2 seconds and said someone put in a heavy load that machine was not able to handle and 2 belts broke and guts of machine are destroyed. Its a $799 fix, not including labor, youre better off buying a new machine. How does he know thats the reason for breaking??? The machine is 2 years old, not a scratch on it!!! Unbelievable!!!! Then states thats $114 for the service call. $114 for 2 seconds!!! Im absolutely furious!!! Whirlpool has a new program (if it helps anyone), if your machine is fairly new they will give you a invoice for 1/2 off a new Whirlpool... Take it from there. There should be a tremendous action lawsuit, look at all these complaints...

Both glass doors have a streak between the glass and you cannot get to it to clean. It looks like you havent cleaned the glass. I bought this 2 years ago. I am worried that the glass may break and heat escaping from the oven.

Do not buy Whirlpool appliances! Save yourself the trouble. I have a Whirlpool free-standing gas range that I bought when I purchased my house in June 2008. Just the other day, the oven stopped working. When I went to turn the oven on, I can hear a clicking sound but the burners in the oven do not ignite. I called Whirlpool and they offered to send someone out to fix the problem. By the time someone comes out and charges me for parts, labor, etc, I will probably have paid half of what I paid for the range when it was new! I also had the same thing happen with a Frigidaire refrigerator last year! The bottom line is that brand name appliances are not built the way they used to be. I am actually looking at buying a Samsung or some other model and try my chances with them!

Whirlpool WRF990SLAM00 french door refrigerator - We purchased this refrigerator in February of 2013. On Christmas Day of 2014, (not even two years later) the freezer and icemaker started malfunctioning. We spent $2000 on this fridge. Luckily we purchased the extended warranty from Lowes. However, Im so disappointed that a fridge that isnt even two years old already has an issue, plus we had to get rid of over $85 worth of spoiled food from the freezer. Credibility fail for a supposed quality product.

17 month old Whirlpool duet washer door lock broke. ($300) repair! Had given my old (13 years) set to daughter when I moved. That set has never had a repair or problem! Why do they keep making things with more bells and whistles we dont need and so cheaply made? Frustrated, annoyed and becoming cynical in middle age.

My family has been without hot water for two weeks. We have the same water heater, we have been to Lowes where we were told the recalled parts were no longer available, unless we wanted to drive 3 1/2 hours to Arkansas to get it. Whirlpool wants to give me a free part for $36.00 worth of shipping and handling! All the local suppliers say I have to go through Lowes, or the manufacturer. I dont want to give whirlpool another dime. This has been a fiasco. How much more can a company disrespect their customer, than to make us pay for a faulty product replacement? It is unacceptable. This is ridiculous. It is December, and I have a family of 7, including a child in a wheelchair.

We bought our dishwasher April 2018. This morning I noticed the paint had bubbled above the heat vent (area 3x 1/2). Upon closer inspection, the the paint was also peeling. We called the company to see if they would replace the skin but the agent said the only thing they could do was send us touch-up paint. The door is considered cosmetic & only covered for 30 days. If we wanted to replace the door panel, we were welcome to buy one from them. However as this seems to be a manufacturing defect, we would be replacing the door every 16 months. When we realized whirlpool wouldnt back their product, my husband looked a little closer to see what needed to be done & found that it had rusted under the paint & painting on top of rust will adhere properly.

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

We purchased 6 six appliances for our home just over one year ago. The initial problem with the washing machine literally took ten home visit to resolve with the final solution being total replacement. Far too many days away from work. The laundry appliances have a loud beeping noise that goes off with the slightest contact, annoying and designed to be eliminated or muted. Today we discovered that the water filter in the fridge is single sourced at over $50 with shipping, which seems usurious at best. Will look elsewhere for the next house/purchase and NEVER buy from this company, including their other brands...Kitchenaid, Maytag, etc.

Purchased my Whirlpool dishwasher in 2005 model number GU2500XTPQ3. So it worked for about 10 years and I am fairly happy with that but I have a warning, my control panel shorted out putting out thick black smoke and I was unable to turn off the dishwasher. I had to turn off the switch at the breaker box. If my wife had of been the only one home she would not have known how to turn it off and would have had to call the fire department. I dont know if the short would have led to an actual fire but with that much heat I have to believe it would have. Warning, dont run the dishwasher when no one is home. Hope this helps someone.

I bought this fridge 2 years ago. I had multiple repairs already. Now the side panel makes noise when you shut the door. Repairman told me it is the foam separating from the side panel. There is nothing that can be done. I also have extended warranty.

I shouldve read the reviews online about Whirlpool before buying our washer and dryer Duet. 4 years later the main bearing is going out and its 1200 to fix it. No support from them or anything. They did offer a loyalty discount on a new washer... No thanks. Just would be another headache a few years down the road Im sure. Goodbye Whirlpool. Never buying anything from them or their other brands. Ill definitely spread the word too.

Not as big as appearance would indicate. Very disappointed in actual usable space. You have to open both doors to get anything but the smallest items out. Had unit for less than a year and had to get freezer door seal replaced. Glad we got the extended warranty.

Our Whirlpool dishwasher works great, gets dishes clean. It is programmable so we can set it to run whenever we choose. It has 3 spinning water spreaders at different levels in the machine, which gets dishes, glasses, pots, pans, bowls, silverware very clean.

We purchased a water heater at Lowes. Our old water heater had an issue but we always had good water pressure with the hot water until we made the horrendous mistake to purchase at LOWES - the worst possible place to buy a water heater. They sent the water heater and we had to look for someone to connect the WHIRLPOOL WATER HEATER (the runaway water heater). When it was installed the water pressure at my home was so bad that only one shower can be used at a time. This never happened before with the old water heater, there was no pressure at all.We called LOWES the WORST PLACE TO BUY A WATER HEATER, they did not accept any responsibility and they sent me to the Technician that Lowes has in DENVER to fix the problem. This bad company (WHIRLPOOL) sent us a crooked technician who wanted to charge us $600 dollars to repair something other than the water heater. We did not trust this person and we called another technician who told us that the water heater is not working properly. There is no one at LOWES and NO ONE at the Whirlpool customer service who can help us with this disgraceful water heater.DONT BUY WHIRLPOOL WATER HEATERS. DONT BUY AT LOWES!!! They are crooks! They do not respond for their products. They do not want to exchange the damn water heater as HOME DEPOT would. Buy everything at HOME DEPOT! Run away from Lowes! They dont stand behind their products, they send you all the work and if you have something wrong with your purchase they will not help you.

At least three times a week the washing machine does not wring the water out of the clothes. The best Maytag wants to offer is to extend the warranty for one year. So washers are supposed to last for 2 years? Will never purchase a Maytag again!!!

I purchased washer (Whirlpool Cabrio wtw5600xwg) on April Fools Day 2011. The first repair was check on 1-27-12. I complained the machine was too loud and clothes seemed too wet - the call was under warranty but tech was unable to verify complaint. So guess what? On Jan. 21, 2013, machine sounds like a stressed jet engine. Now we are diagnosed with a bad gear case for a total repair of $439. Now we are not under warranty and Whirlpool takes no responsibility. Doesnt the consumer have any rights? Do you think Ill buy Whirlpool again?

Weeks ago, we received a new refrigerator from Whirlpool. Never really got down to temp. They replaced the compressor and still does not work. You would think a company like Whirlpool would replace it. That is a joke. They want to try and repair it again, another compressor? Now I have thrown out the food in it and feel like Whirlpool could care less. DO YOURSELF A FAVOR< DONT BUY ANYTHING MADE BY THIS COMPANY OR THEIR OFFSHOOTS.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

Brand new dishwasher and first time I started it I noticed the timer showed the cycle taking over 3 hours. When done I opened the door and there was some water in the bottom and the door was very wet. Dishes had not been washed. A glass that had turned upright had no water in it. The soap pod was still intact. I started over again and the same thing happened - two more times. The silverware is not clean either. Its going back!!! Im sure there will be resistance but we will deal with it.

The refrigerator itself is noisy but thats not the problem. Most of my low ratings are because of the ice maker. Instead of being in the freezer it is up in the refrigerators area. It jams a lot, makes a lot of noise, had to replace the ice maker assy inside it already as it quit. Then the defrost water drain plugged and had to be cleaned out. Too many problems for such a new refrigerator. The refrig. itself works fine but get one with ice maker in the freezer.

This is our second Cabrio w10550273a. The first one was just as bad as this one. It was replaced under an extended warranty we bought. This washer just like the last one constantly gives a UL code. Thought the washer and load are level.

Weve had this microwave (WMH31017AW-2) for 2 1/2 yrs and the door is falling apart. It started with one crack and now the middle glass of the door is falling out! I took the door off so the the glass wouldnt fall on the stove and the plastic around the door literally crumbled apart. So disappointed since that was the same reason we took the other one back that was in this house when we bought it. The microwave is now discontinued and when I did find a door online it costs as much as the microwave! Whirlpool doesnt distribute the dependable products that were, back in the day, associated with the name WHIRLPOOL. Shame on the greedy people who have taken over and cut back on quality material and labor to put an extra penny in their pocket!

Has multiple wash Cycles. Big enough to wash a comforter. Has a delay setting so I can set it 8 hours in advance. Easy to load, easy to add the wash ingredients. Its a top load so its easy to get everything in and out.

We purchased this Whirlpool refrigerator at the end of July 2018. At the beginning of November 2019 all the interior lights went out at the same time. We called the store where it was purchased, and they instructed us to call Whirlpool. Because a year had passed, they were not willing to do anything other than put us in touch with someone who could service the refrigerator. We already know the repair will cost over $200. That does not include payment for the service call or the labor. At almost the same time we purchased a new Whirlpool microwave. We have also had problems with that. My advice is to stay away from Whirlpool products if you want something that will last longer than a year.

In 2007, I purchased two 30 gal. Whirlpool Flame Lock water heaters (Model: FG1F3030T3NOV) from Lowes for two different homes that I own. I started having trouble with one of them after about two months. I replaced the thermocouple several times, with each one working only about a month. After that, Lowes replaced the complete burner assembly and that, so far, fixed the problem.Now, the second one has (1 Oct 11) gone out. The local Lowes told me that they are out of the burner assembly for this water heater. I called them this evening and was told that they didnt know when they would have the part, but to call back about every other day to see if they had received the burner assembly for this water heater. They said that it could be from two days to two weeks before they may receive this part!In 2008, I also purchased a 40 gal. Whirlpool Flame Lock water heater (Model: BFG1F4034T3NOV) for my house and no problems so far. In 2007, I even recommended that a friend of mine purchase and install one of these in a home that he owned. He did. I helped him install it and it later had the same problems! I am now needing a water heater for my workshop. What can I buy thats dependable?

I purchased a Whirlpool Refrigerator with French Doors, Model No. GX5SHDXVD03. Within 1 year and 4 months, I had to replace the defrost control board. I spoke to Whirlpools customer service, George ** said he was sorry for my inconvenience but that he refuses to help in any way because I missed the warranty period by 4 months. I spent $352.74 for the parts and labor and lost hundreds more in food. Do not purchase any Whirlpool products. I was told that the boards have been going out frequently.

The washer and dryer are great. They were a reasonable price and they have not failed on me yet. Thank God. I like the little reservoirs where you could put your fabric softener and soap which this one does not have but it was a good price so I ended up purchasing it. The whole family puts all their clothes in it and it runs on a daily basis so I have nothing bad to say about it. Thats for sure.

I bought the stackable Whirlpool Duet. Piece of garbage (model # WFW9150WW). From day one the washer never worked. Error lights/bells kept going on before the second spin cycle. First repair guy couldnt figure it out. And the manual says just unplug and plug the power cable back in. Sure--every time I use it? I called Whirlpool service and they said a new control board was needed without even seeing the machine, which tells me this is a manufacturing flaw. I waited 2 months for the board. When it came, the repair guy put it in and then the machine would not stop filling. So another switch and hose are being ordered. Whirlpool customer service is completely useless. And no one will even discuss replacement. Now Im stuck. $700 out on the first machine and $200 on the extended warranty, which will be useless because Im going to dump the machine. And additional $800 on another new machine which probably wont work either. Oh, yeah, and you have to use special soap, which Ive tried, and got down to using only 1/2 a teaspoon because the suds never cleared. Please tell all your customers never to buy Whirlpool!

Twelve years ago we bought an LPG Whirlpool range for our new home in Rio Rancho, NM. About 5 years ago, a tenant at our home reported a gas leak and the propane company determined that the Whirlpool range was at fault. The dealer in Albuquerque repaired the leak, by replacing all the valves at a cost of $470. A week ago, after a propane fill, once again, at least one valve was found to be leaking. Apparently, Whirlpool does not know how to make a valve that holds up over time. Over a 7 year period, I paid almost double the cost of the stove, only having to replace it at 12 years. These stoves are DANGEROUS! I will not purchase another Whirlpool product for the rest of my life.

We bought a Whirlpool Washing machine a couple of years ago. We have been having problems. It does not get the clothes clean and laundry has an odor to it. We bought it at HHGreg by the Dayton mall in Centerville, Ohio and also bought the extended warranty. It was the largest capacity machine they had in Whirlpool so I dont need to mention what we spent for this thing. We have had a service tech out 3 times. The first time he replaced a part. It still didnt fix it. So they were out two other times saying nothing was wrong with it. Not only is it not getting the clothes clean, but is putting lint pieces all over the laundry. The warranty place already said if they come out again and they cannot find out what is wrong, then we would have to pay for the service call. We then went to the store we bought the machine and talked to the manager. We got no help from him. All he did was throw us back to the warranty place. Not to mention, the family is having itching problems with their skin because the clothes are not only not getting clean but the soap is not rinsing out. In other words, we are suppose to eat this expense and move on. This is a new machine!!!!! And all it is worth is taking it to a metal place to scrap out!!!!! We will never buy another Whirlpool product again. It is really **. They don’t back their products up and do the consumer right. There are a lot of complaints online about the same identical thing I am writing about. They should reimburse the people the money that they wasted. Thank you.

We purchased this Whirlpool washer 5640XW3 from Lowes. It doesnt clean the clothes. Even if I run them through a second wash cycle, the clothes are still not clean. Called Whirlpool and they said nothing is wrong with it. I use HE detergent and load clothes around the agitator as directed in the manual. Still, clothes are not clean.

We bought this Whirlpool Cabrio Platinum washer 1/21/12. After less than 2 years of use, it now sounds like a jet plane taking off on the spin cycle. It is the first Whirlpool appliance I have ever bought and IT WILL MOST LIKELY be the last. After years of using and buying Kenmore appliances I fell for the salesman pitch that this was a better product. After spending $900 on this washer new, Im now told by 2 repair places that service your products that the repair cost for parts is$450 and then labor will total over $700. NOW to add insult to injury, this same machine now sells for $519 new.

We bought this at Lowes. Initially, they got the color wrong. It took two trips to get the right color (white) then a third trip because all the parts were not there to install the dishwasher. After a few months the second shelf rail end caps fell apart. Now, after a couple of years the pump goes out. RUN from this manufacturer.

I purchased my Whirlpool washer and dryer Cabrio Platinum model in September of 2014 from Lowes and have never been so disappointed in a washer in my life. Not only was it the most expensive washer and dryer set I have ever purchased but it is the absolute worst in performance. It has destroyed most of my clothes and linens, doesnt get them as clean as my former Samsung front-loader, and is constantly twisting up the clothes, getting out of balance and requiring me to adjust the clothes once or twice during each wash cycle. On recent research, I have found that I am not the only one experiencing these problems. Whirlpool should RECALL this series entirely! And I intend to post this review every place I can to prevent future sales of this horrible product.

Whirlpool Cabrio washer - I had all the same problems as all the 900 others on this site. After 7 months, it died. The factory repairman told me it needed a new transmission and motor. I returned it to Costco for a full refund and did a lot of research and bought a Speed Queen. It has no computer. It’s just an old-school washer that cleans, and best of all, it’s made in the USA with a 10-year warranty.

I recently purchased a Whirlpool Gold Edition double range. After a couple of uses, the top oven thermostat went on the blink. I sat the thermostat to preheat. After 20 mins. and a call to the warranty department, the oven never reached the desired temperature. The warranty department sent a repair person who could find nothing wrong with the stove. I called Lowes and told them I couldnt trust the oven not to do it again (after several times of it happening and resetting the circuit breaker). This would be a disaster if it happened during the holidays when I cook for 20 or more people. Lowes manager said they wanted me to feel comfortable so they replaced the entire range. GUESS WHAT... 2 weeks after having the new one... same problem. I set the thermostat to 400 degrees and when it got to 390, I saw the light blinking. Waiting 10 more mins, nothing changed. I hit the cancel button, reset the bake... the thermostat, when I turned it back on, showed 365... What the heck! I didnt open the oven door. Whirlpool ranges are a piece of crap. I am calling Lowes again tomorrow to return and advise them to stop selling the junk. Dont blame Lowes... They do the best they can with the crap they sell.

Im no longer buying Whirlpool products. They do not all up and are made like crap. My Cabrio washer being the most recent problem. Hinges broke on the lid and the drum spring broke. Out the door it goes! Im having my American made Speed Queen delivered tomorrow, the last Speed Queen I owned last over 30 years.

I have a Whirlpool GoldSeries dishwasher and I wish I had never bought it. I’ll start with the cons because I don’t think any other dishwasher on the market matches this: After 3.5 years either the motherboard or the motor is trash. It will cost so much to fix it that buying a new dishwasher is a better option. I paid more than $800 for the dishwasher + $200 for the install + $75 for the service call to find out it is garbage. I used it about 2-3 times per week, which adds up to about 455 uses total for the time I used it. This shows that the cost of this dishwasher, without operational cost considered, is $2.36 per load (or $307.14 per year if you prefer). No other appliance I have ever owned was as expensive, over its lifetime, as this dishwasher.Whirlpool customer service was difficult to get a hold of and then obstinate and useless. The dishwasher would stink if it was not cleaned regularly. Pros: It is quiet and it cleans the dishes well. Recommendation: Do not waste your money on this. Many other dishwashers are quiet and clean dishes but not many will be this big or expensive. A disappointment over their lifespan.

Similar to what I am reading below and on other sites, my hot water heater stopped working. I spent about an hour trying to relight the pilot light, which apparently you cant do with this model because it breaks. My first thought and action was to call a plumber to come fix it. When he arrived he said it was reverse thread and that I would have to call Lowes to get a replacement part. When I called Lowes they said they would call Whirlpool and then give me a call back. Two days later I still havent heard back or taken a shower; I am going to the gym tonight. Finally, I got online and called the 800-number and am being sent a part to arrive tomorrow. I asked to be reimbursed for the cost of the plumber since they obviously knew they had a problem (they assumed why I was calling the warranty line) and redesigned the issue with a voluntary recall. Whirlpool, please make this right. I know you license your name to American but it is still your name and brand reputation.

The Whirlpool microwave stopped working 14 months after purchase. The technician, who was a complete moron, said that he couldn’t find the problem, but took 129 dollars in service fee, which was extortion. Their appliances are ** and so are the ramrods that they hire to service them.

3 months after warranty the oven will not stay on. I will stay on for only 20 minutes then it goes out. It clicks but will not come on. I can only use my oven for backing biscuits but cannot bake chicken or meats.

I have owned my Cabrios for over a year. They have given me no problems at all! I keep them cleaned with Affresh, even though Ive never ever had a smell in them. Also, I have never ever had my washer or dryer not do its job!! My clothes are fresh as a daisy and clean. I bought my Cabrios because my father purchased his first set and raved about them. So, I used his to try them out. Absolutely wonderful machines!! You get more area without those crappy agitators in the way for one thing. Always fresh water, not washing in the same filthy water, yuck! It wasnt but maybe 4 months later for our new house that we got our Cabrios. I insisted on them! LOVE LOVE LOVE my Cabrios!!!

We bought our washer, dryer, stove, microwave, and dishwasher in September of 2010. In 3 years we have had to replace our Whirlpool over the stove venting microwave, have spent over $550.00 on repairs on the Whirlpool refrigerator, and now have to replace our Whirlpool Cabrio washer. This of course does not include our time, effort & frustrations, especially with Whirlpool customer service. Will NEVER buy Whirlpool again. Were all for a class action lawsuit.