We bought a new Whirlpool Dishwasher. Installed it, wife used it for two loads. The third time she tried using it the door sprung and it no longer latches. After two weeks of calling Whirlpool, we finally had someone come out to fix it. After the repairman took a hammer to the frame he stated that it had been dropped. He wobbled the dishwasher back and forth with his hand. He said the frame will never be correctable and we will always have problems. After another week we got a hold of Whirlpool and were told the repairman has ordered parts to repair the dishwasher. Whirlpool is hoping it will hang together until the warranty expires. If the dishwasher were fixable that would be fine. However, when the repairman who has years of experience in his job tells me it will never be right and will always be a problem, I believe him.

Purchased Whirlpool side by side June 2010. Within a few months realized major problem with ice maker. Reservoir on door would leak and freeze inside the door. Service man out at least twice, advised to maintain service contract as would continue to have issues. It still leaks, freezes up and does not dispense properly. Now the inside liner of the refrigerator is cracking and neither the warranty company nor the WHIRLPOOL Manufacture Co. will stand by their product. It is my intent to warn as many people as possible, so they will not have the same bad experiences.

In May of 2010, my husband and I purchased a Cabrio washing machine. By the fall of 2010, I had put in a call to Whirlpool due to the washing machine chewing holes into clothing and not cleaning the clothes. Some of the clothes would come out of the washing machine with dry spots on them. Whirlpool sent out two different servicemen and even though one of them replaced the agitator we have still had problems with it. One of the servicemen even tried to tell me it wasnt the machine but it was my detergent (I use HE Purex dye free). I was told by a service rep at Whirlpool that there was nothing more they could do and I would just have to deal with it. I understand that products go faulty but with good customer service these issues could be resolved. Whirlpool obviously has little regard for their customers. I have contacted the Better Business Bureau. Hopefully they can get results.

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.

I will be happy to provide exact details soon but wanted to share I have had most of our clothes and household items-sheets, rugs, towels etc. ruined by this machine. And it is under warranty and Lowes in Dallas, Texas where I purchased it has seen the evidence. I rolled in with a suitcase full of different examples of ruined items and some photos. The repair person Whirlpool sent out was nice but not willing to document clothes and said the machine is fine after a few diagnostics digital checks. He did not run a load of clothes! And it takes forever to set up. My wait was over 3 weeks. etc. Lowes has been incredibly wonderful but states the warranty is Whirlpools decision and all Lowes needs is a RA (return authorization from Whirlpool) and Lowes is happy for me to buy whatever ever washer I like and even are willing to give me a discount as they know how horribly Whirlpool has treated me.The manager stayed on speaker phone with me for over an hour. My husband is a lawyer and I will further pursue this situation as Whirlpool hopes I will just drop it by March when my Whirlpool warranty runs out or give up from protocol internal exhaustion. As they have insulted me in every way... Even suggesting I sell the defective machine to someone else... And I said, How in good faith and having a conscience could I do that? Anyway after spending a lifetime it seems trying my best to get this resolved with a cauliflower ear from being on the phone for so many hours with their resolution leaders and specialists etc. It is obvious I am about to have to go on social media and do everything I can to Save others from this time waster, Save their laundry, etc. and Did I mention at times it leaks a little bit of water out the front. As it was the least of my worries as I was showing nice tech my expensive ruined 900.00 ski pants, ruined shirts etc. I think the machine cost around a 1,000 to 1,200 so... Will get back to you for an update. I have a whole file folder on documentation now and it is not about the money or the fact I cannot wash clothes. It is down to principle... On my third top-level resolution leader in MI. -Jim- basically had me read between the lines that I was dealing with a Fortune 500 company and would never win. He is underestimating the level of frustration and lengths I will go to not be taken advantage of as a woman, a career girl, a wife and a yoga teacher. I will be in Yoga warrior mode and this is disheartening as all I want to do is wash my clothes. Did I mention all my Lulu Lemon pants are ruined and I never put them in the dryer! Only delicate cold etc. Have them remain intact etc. really simple here but Whirlpool not standing by their warranties. And my whole home is outfitted with Jen-air, Kitchen-Aid, Maytag etc. which are all owned by the same company so I have been a very loyal customer who possibly just got a lemon. Or standards at the company have severely changed. More later on developments hopefully. Sad in Dallas.

I bought all my kitchen appliances in Home Depot 4 months ago (April 2014). The wall oven, Whirlpool, never worked. Flamingo Appliances is the name of the company that does services for Whirlpool in my city. They keep changing parts and today is the 3rd visit that the technician will be in my house trying to solve the problem. Customer service in Michigan is DISGUSTING! I probably have to buy another oven because they say they wont replace it if they think its fixable. 3 MONTHS! I will never buy Whirlpool again. I hate them.

I purchased a brand new washing machine and had service come to repair the machine approximately five times within the first year. Every time the machine was repaired, it was for different reasons. I contacted the main office and spoke to a woman named Sherry who is a supervisor and she was very nasty. This is a brand new machine and I feel that it should be replaced with a new one. Sherry said that there was nothing she can do for me. Is there a lemon law for appliances? The machine is used for my son and me only. I have all appliances in my house by General Electric and this is my first and last experience with Whirlpool.

I bought a washer and dryer a couple months ago. The washer has been completely replaced already. It is a piece of garbage. I have to wash my laundry four times and still my clothes are not coming out clean. I have three small children and it is just a pain to always be washing their clothes. Things as simple as orange juice not coming out of a shirt even using bleach. It was sold to me with high efficiency and great water consumption but of course it is, it doesnt use any water to wash the clothes. I had a tech come out to look at it and even they said its had so many complaints about how it washes. She said that the wash machine is the worst out there and I totally agree. If you cant wash baby clothes and get puke out of a bed sheet then I could just imagine grass stains. Wash machines don’t last forever but I can promise you I will never purchase another in my life. Best part of it is when whirlpool was approached, did absolutely nothing about. Basically said, “Have a good day, thats what you bought, thats what you get.” Considering its still under a year warranty. Tell me I will never buy a whirlpool again and I will never recommend one to anyone who asks. The customer service and product dont stand anything against other manufactures. I learned my lesson the hard way but Ive opened my eyes. Never purchase a top loader. Word of mouth travels fast. I know my complaint probably means ** to whirlpool but for what its worth, Ill be spreading the word around.

We purchased the model WFC7500VW, 24” washer and accompanying dryer in June of 2015. Within a couple of months, the water pump went; also we continually had to take the front panel off and clean out the filter when we get an A11 code! Now we experienced an F06 code... This code means the washer can’t go into high speed. The repairman (Whirlpool recommended), told us that a new tachometer motor, etc would run $500-$800 with labor! He also said that the noise the drum made was bad. My dryer works fine (only complaint is the grinding noise it makes, which Whirlpool told me is normal)... I would like to purchase a new washer, but don’t know what will fit under the dryer. I do not want ANY Whirlpool product!

Ive bought two (2) whirlpool dishwashers in approximately two years. Both dishwashers stopped draining shortly after one year. I checked the filter, removed parts at bottom of appliance and checked the drain hose and my home drain to make sure that none were clogged. After testing the draining system a burning motor smell started to occur. At that point I disconnected and threw away the appliance. I dont know for sure but I think this is a recurring and known defect.

My 4- to 5-year-old Whirlpool Cabrio 6300 began to display errors recently. F1 was the 1st error code I encountered. After giving the washer a hard shove and rocking, it began to work properly again... for a while. I noticed on some large loads that I was getting an LD Long Drain error. I could hear the pump running but with little water flow. Eventually, it would time out and give the LD error. A service tech was called and determined that the water pump was defective, although the impellers inside appeared okay and had no foreign objects to impede its spinning. After spending $225 for the service call, the LD error resurfaced about an hour after the tech left. Tonight I got the F1 error again, and once again the washer responded to a sharp rap. The replacement control board, which the F1 error code involves, is $220 plus labor. $440+ for a repair to a $600-$700 washer? Im going to dissect the main control board tomorrow and look for loose or corroded connections. I cant understand why the LD code occurs when I can hear the drain pump running... just very little comes out. Other times it empties like Niagara falls... I cant understand why it works sometimes and fails others. The pump is either on or off. It doesnt have multiple speeds as far as I know. Im not sure what to do next... probably try to re-sell the new pump that was installed to recoup some of the money I paid for a non-working Cabrio. This seems to be a very common occurrence.. Have any class action suits been mentioned? If so, please feel free to contact me.

Just like many before me... Renovated my kitchen. Had my model WRF767SDEM purchased from Lowes (not much help either) in my garage for 2 month before plug in. After 3 months upper part did not cool, lost food to spoil. Call WP. Tech came. It took 3 wks for part to be replaced and worked for a month. Now we are waiting for a new part to arrive for the second time > Tech Stated it is a known design defect issue by Whirpool. (But units still being sold everywhere.) WP Should recall this units and stop selling them!! IT IS A LEMON FRIDGE. Do not buy!!! I wish a law firm read all of these complains and make this a class action suit out of this, It will be the only way Whirpool can be held responsible to Us the consumer!! Yes I am mad after $2600 wasted on a POS fridge and a deplorable customer service!!

Pulled a track home water heater out to replace with a Whirlpool 12 year smart heater. Well within 4 years with tank flush every year the water coming out of my hot water tap looks like mud. We have whole house water filters and when you drain the sink there is a layer of rust. I called and asked them what I should do and they told me to flush it with apple vinegar. Did this but a week later it was back. Called again and was told to do it three times with apple vinegar. There was nothing about this in the care manual about apple vinegar. I will never buy Whirlpool again NEVER!

I purchased a Duet Front Loading Washer (model WFW9750) in May 2010. In September 2011, the noise level had become intolerable. I called a local service company. They advised me that the main bearing was bad. It would cost more to repair than what it was worth. I contacted Whirlpool. They could not do anything unless the machine was inspected by one of their authorized service companies, which they scheduled. Two weeks later, A&E Factory Service arrived and confirmed that the bearing is bad and the cost to repair will be $1,542.06. Whirlpool customer service transferred me all over the country to tell me that the machine was out of warranty and there was nothing they could do.

I had a perfectly good Kenmore range, but I didnt like the color. I purchased a Whirlpool 30-inch gas range at Lowes. I had problems immediately! The repairmen were at my house 6 times within the first year. My warranty expired and they wanted me to pay for an extended warranty. I refused to pay any more for this piece of junk! I fought with Whirlpool and demanded they either replace the range or reimburse me the full cost. They finally agreed, after many heated conversations, to replace or reimburse me as long as I promised not to purchase a Whirlpool product again. What kind of company would say that? A company that knows their product is defective and has poor customer service. I opted to take the new range that they promised wouldnt have the same problems. It is having the same issues as the original one. It shuts off in the middle of cooking and it is infuriating to say the least. I can promise Whirlpool I will never purchase a product from them ever again!

In March 04 2014, I purchased a Whirlpool washing machine. After having had a Whirlpool for 17 years without any problems with it, I purchased another one. This last one is a piece of junk. I dont even want to talk about the noise, I think it is expiring or on its last leg. They should fire the engineers that invented this model and bring back the other engineers that invented the one I had for such a long time, they far surpassed these space scientists that they now have. On August 8, I called Whirlpool, they sent me someone from Dinos appliances. This man tells me that there is nothing wrong with this machine and that he re-calibrated it. Whatever that means, it is still not wringing the clothes properly. There are only 2 people in my household, so my loads are not very large. I even tried this Drain & Spin cycle after the wash was completed and the clothes still came out too wet. I also have a Whirlpool Dryer and I will not replace it with the same brand. I also will never buy a Whirlpool product again and will make sure that I will share my experience with everyone I know.

Although we live in Canada, we purchased our slide-in oven at Sears Roebuck in Buffalo, NY only because of the size availability only in the US (actually, the unit was manufactured in Canada as we found out later!). Obviously, this created another problem since the unit was not underwritten by Canadian Electric codes, Sears Canada repair would not touch it! Once installed, it worked great until the first problem with the oven quitting after self-cleaning. It is the second time in 3 years that both the thermostat and the sensor went in this RBS245 slide-in oven. Once the self-clean cycle completes (quite smelly!) and cools, the oven does not operate rendering the oven useless. First time, in 2009, Sears repair only suggested (since they would not do repair on it for reasons stated above) which parts could be faulty: Timer, sensor, thermostat or elements. It was thought to be the electronic timer unit, which was replaced at a $215 (needlessly) because that was OK. Both thermostat and sensor cost $150. Even the elements were replaced, $52. The second time, just a week ago, exactly the same happened. I replaced the 2 items: Sensor and thermostat at a cost of $154 and the oven worked fine again. I called both Whirlpool US and Canada, but no one could/would give any answers why this happens.So far, it cost $600 in parts to repair! This is nonsense from a company that has had good reputation and record. Obviously, that is changing! If Whirlpool cannot engineer a product that works as they say it does, they should close the shop! Reading here, there are others who complained with the same problem. It is time for Whirlpool to come clean!

Our over the range Whirlpool microwave door casing is disintegrating where the door handle screws to the door. Big chunk fell off today.

I bought a Whirlpool Cabrio Top Loader High-Efficiency Machine on March 20, 2013. 14 months later, it failed. When I called customer service I was informed the 1 year warranty had expired (I knew this already) and that all they could offer me was a $319 extended warranty to fix machine and guarantee covered future repairs. Luckily, I had the machine repaired at no cost to me after complaining to the sales people I bought the machine from the year earlier. They contacted their Whirlpool representative who had the repair covered. Now, 3 years and 11 days after purchasing it, it failed again. This time the machine would no longer spin out the water. Whirlpool offered nothing more than to give the website and special code for a discount on a new machine. After some haggling, they agreed to pay for 50% of the parts only, no labor. I argued this machine must be a lemon, as they have told me theyve heard no prior issues with this machine and that it would be reasonable to replace this machine. They refused any further assistance. So I threw this piece of junk away and instead, for $185, bought a simple rebuilt 15 year old Maytag washer with agitator, direct drive. Just a couple of knobs. No computer, fancy bells and whistles. I can say with absolute certainty that I will never purchase a Whirlpool product ever again. I also believe these machines are no longer meant to last like old washers (and dryers) used to.

Why am I not surprised by this stupid American company? I purchased a brand new fridge in June this year and for the last 5 months I have had about 20 different technician visits by five different technicians who changed almost everything you could possibly imagine - evaporator, control, sensor, compressor, display, etc., etc. And the company still refused to take any responsibilities. They kept telling me that more inspection was needed EVEN AFTER all the technicians said there was NOTHING THEY COULD DO. After having to yell at them for about an hour, they finally realized they had to issue me a new fridge. What a piece of crap they are. Even then when I called back about the exchange, they pretended they could not find my file. WTF??? They really tried EVERYTHING they could not to issue an exchange. Wow. What an incredible company and its customer service. I will never, ever buy another American product - nothing complicated with computerized parts anyway. They are NOT capable of producing such complex machines. They should stick with toasters or juicers - lol. Stupid Americans. LG and Samsung all the way baby!!! ** you Whirlpool.

I have a Whirlpool dishwasher for a few years, it cleans great, works great, the dishes come out clean and shiny, so do the glassware. Even pots come out nice and clean, what more can you ask for?

I am also disappointed with this manufacturer. I recently purchased an over-the-range microwave oven model KHMS2056S. Within 45 days of use, it quit heating. I initially established a service call through Kitchenaids web site, with the first available weekend appointment approximately 2 weeks away. When the contracted service represented arrived (A&E), he asked me for a cup of water and placed it in the microwave, along with a temperature meter. After running the microwave for 45 seconds, he informed me that microwave was not heating. This was the extent of his troubleshooting, only to confirm what I had already reported in my initial service appointment description. The next step was to order parts and wait another 10-20 days for a new service appointment. When I challenged the technician on this, he stated that they were required to verify the problem and check the model/serial number of the appliance. But these were also provided through the automated service appointment system. Thanks to Lowes who allowed me to return the item, even though the purchase date was outside the 30-day window. It seemed obvious to me this warranty contractor was simply creating multiple service calls to inflate the repair costs. And ultimately the consumer pays this.

I purchased a 50-gallon Whirlpool natural gas water heater (12 year warranty) from Lowes approx 2.5 years ago. Just before Thanksgiving, the pilot light started going out once a day, then twice a day. Now, I can light the pilot light in Pilot mode but as soon as I release the red button, the flame goes out. I called Whirlpool and received phone troubleshooting support resulting in a recommendation to pick up a new thermocoupler from Lowes which I did. While searching for someone to install (unfortunately Im not that handy), I ran into the thousands of complaints filed about the very same problem Im having over a number of years and right up to todays date. I called Whirlpool back and got the same song and dance. Theyd be happy to help me troubleshoot if I can get the required meters etc. to test devices, do draft tests, etc. They claimed the problems were fixed with the newer model that I have but certainly cant explain why I have exactly the same issue. What they are not willing to do is stand behind their product and get me hot water. Tried calling Lowes and got the response that I have to deal with Whirlpool. It appears that this newer BFG model is just as flawed as the older model and the warranty is pretty much worthless other than getting a few parts. I used to think that Whirlpool products were reasonably good, however, I will never purchase another.

I purchased a Whirlpool catnip washer from Brandsmart in August of 2010. It worked fairly well, but would sometimes need for clothes to be rearranged in order for the spin cycle to complete. In June of 2013, it started to not wring the clothes out completely. It then stopped working. I called a repairman and got an estimate of $550 dollars, but I paid $578 for it.I called Whirlpool and spoke to the supervisor of the consumer concern team. She offered me a fifty percent discount on the parts for the repair. I checked the web to see if anyone else had any problems with this product and found several. I suggest you do your homework before purchasing a Whirlpool washer. I was positive they would do more, since it’s such a prestigious company.

Have read several reviews on Whirlpool refrigerator. Short and sick. I had my refrigerator less than a month. Broke down, been getting NO satisfaction from Whirlpool whatsoever. I WILL NEVER BUY A WHIRLPOOL APPLIANCES AGAIN. Service is terrible. Months have gone by, and its still sitting in my kitchen broken. They are taking their sweet time fixing it. Garbage. DONT BUY WHIRLPOOL, save yourself the hassles.

We will never, I repeat, never buy another Whirlpool, Kitchen Aid or Maytag (other than the Maytag dishwasher) product again. After just two years on the Cabrio washing machine, the bearing on the wash tub began to go out. As it was out of warranty, the cost to fix was greater than just buying a new machine. This was a known problem and Whirlpool failed to remedy the problem. Based on this experience, we went with an LG as a replacement. Before you buy anything, research it.

I currently rent, and so when our literally 30-yr. old GE dishwasher broke down, our landlords went out and installed us a new Whirlpool Dishwasher. I was excited because FINALLY I would have clean dishes and a dishwasher that didnt leak a bucket of water all over the floor. Well, weve had it for about 6-8 months now and I have to say that I am not impressed. It is not as great as I thought itd be. First of all, my dishes still look cloudy (despite using various brands - even homemade - detergent). Second, one out of every three washes gives me still-dirty dishes (food still on them, even though I rinse before loading the dishes). Now, Im not talking about tough stuck-on, need a jack-hammer to remove food. Just normal food. Mostly it is oil, like if I had a plate that I had eaten French fries on and there was grease left behind that normal rinsing didnt remove. A new dishwasher SHOULD be able to clean that! Third, it guzzles Jet Dry liquid (or whatever rinse aid you use) like an alcoholic in a bar. I have used a BIG bottle in one month. One month. With the old 30 yr. old dishwasher, it took me around 2 YEARS to use a big bottle. And lastly, it takes F-O-R-E-V-E-R to wash a load. My old dishwasher took an hour tops - to rinse, wash, rinse, and dry - and it was 30 years old. This new Whirlpool takes 3 HOURS!!! I can literally hand-wash all of my dishes (and with a family of 4 thats a lot of dirty dishes in one day), sit them out to air dry, and take a nap and it take LESS TIME than using the dishwasher. The dishwasher has all the bells and whistles to make it look good, but trust me, if I could have had the 30-year old dishwasher rebuilt to newness, I would have begged my landlord to do that instead. Dont waste your money on Whirlpool appliances. I left another less than friendly review for my Whirlpool Cabrio washer (only 5 years old), if you care to see it. Learned my lesson, dont buy Whirlpool. So disappointed because they used to be (USED TO BE) a reputable dependable brand.

Have always bought Whirlpool appliances and never had a problem like this. Open the door on the top loading washer and its rusting out. I am having to buy a new one but considering other brands. No complaints about the matching Dryer.

We bought a new Whirlpool dishwasher with a kitchen reno. It cost over $1000. One month out of warranty the pump died. As this is apparently a common thing with these dishwashers the company sent a new pump, free of charge, but we still had to pay $150 for the install. Now, less than 2 years after purchase, the dishwasher refuses to drain. I wrote to the company, they are not interested. Dont buy Whirlpool, you are only throwing money away.

Purchased a new Twin Thin washer & dryer combo when I first moved into my new apartment two-years ago since it was a good fit for the space that lies inside my patio. Nothing BUT problems from day one since it DESTROYS/EATS your delicate clothing. Repairmen in and out could find nothing wrong with it. The problem lies in the fact that the so-called gentle cycle agitates at the same rate as the other cycles, but stops so that the agitation time is shorter, but at the same time the agitation no matter if its shorter is still too vigorous for delicates. Under contract, so keep having repairmen come at no cost to me other than a complete waste of money purchase inclusive of unwearable brand new RUINED clothing.Called the company the other day & was told they could SELL me a different one, but they would probably not pay to have the LEMON removed. Also, suggested I wash my delicates in a mesh bag which is impossible to do when one has maxi dresses that tell you to wash on the delicate cycle. Mesh bags are made for small items - DUH!Repairman came again today, and was kind enough to make call to them. Later found that their response to him was that I was putting too much into the washer. Like no way, Jose! Asked tech to forward e-mail to them advising that they were more than welcome to come film me when I wash because that was NOT the problem with it. Already knew Whirlpool had discontinued this washer/dryer combo, but THAT fact was never mentioned. A lot of sites online no longer even carry the parts for it. Found others with the same issues on various sites relating to this now discontinued model which is akin to a Purana fish with shark fins. E-mail sent to tech that was here today asking him to forward my e-mail to whomever he made contact with today via phone that unless the situation is remedied that I would have to take further action. Now awaiting response from the main man tech or whatever his position is at Whirlpool.Bottom line is that it is a LEMON that has not only cost me money, but excessive amount of time to resolve this issue not to mention time spent online researching this, that and the other concerning this discontinued appliance. Warning to all out there - DO NOT BUY WHIRLPOOL - UNLESS YOU WANT A HASSLE and a lot of BS. Found they already have an extreme number of lawsuits against them during my online searches. So, ball is in their court at the present time. Will be calling them the end of the week once again in order to get this problem resolved unless I hear from them via e-mail.Totally exhausted from it all. Word to the wise: DO NOT waste your money on Whirlpool appliances unless you want more problems than you already have. I have health problems which are exacerbated by stress, and believe me this has been one of the most stressful and one of the longest things to resolve (two years) brought on by their lack of admittance that this DISCONTINUED product is a real LEMON. BUYER BEWARE OF WHIRLPOOL - I rest my case.Updated on 07/12/2018: Cant seem to find this model anywhere now. Not to mention the fact that I found it not only eats my delicate clothing, but is also ruining my towels, etc. and I use the regular wash cycle for these items. You cant find my model #WET4024EWO anywhere; looked like they put a similar one out with a slightly different model # in which the drum/agitator differs from mine. Now find Im having difficulty finding that NEW stackable model on the WEB. Leaves me wondering if that one has also now been discontinued???They have given me no resolution to my problem as of yet, and Im totally EXHAUSTED from it all. Have high blood pressure, a heart condition, and cant even sleep right anymore due to their lack of cooperation to solve this on-going problem which is certainly not helping any of my medical conditions either. Its causing nothing but STRESS, STRESS, STRESS and more STRESS! Will be filing a complaint with The Better Business Bureau by next week if not resolved by this weekend (if I live that long).Updated on 07/17/2018: In looking at this Washer/Dryer Combo Model # WET4024EW aka LEMON again today after noticing more clothes which now have holes in them after being washed on the gentle cycle with the highest water level possible, I noted the size of the agitator. Bottom line on this is that the agitator also appears TOO LARGE for the machine which also could also be another contributory factor to the destruction capabilities of this now discontinued model. Also, inspected towels today and found torn stitching & thread tearing in those also; appears EVERYTHING you wash in this machine gets destroyed. In researching further on their newer makes noticed that the agitator appears either much smaller or has been removed altogether. Hopefully this will serve to aid anyone out there who is thinking of buying this machine second hand from anyone out there that is attempting to sell it vs obtaining restitution from Whirlpool.

In April of 2009, I bought a Whirlpool over the range microwave, model # MH2175XSB-5. In September 2011, a small piece of the door fell off at the hinge. Pieces have continuously fallen off and now the door is splitting, rendering the item useless. It was purchased at Lowes and I had them installed the item. Two years of service plus installation come to big bucks for a piece of trash.

Whirpool Part #WPW10564292 refrigerator handle - I am a property manager who has 264 units. We have only been open for 1.5 years and have had to replace 30-40 door handles because they crack at the top where screws are. We tried calling Whirlpool Customer Service because obviously this is a defect and she said they looked in the system and didnt see any recall or issues. We also asked for a representative from Whirlpool to stop out so we could show them the issues and she said we have nobody in the area. We have 9 service requests outstanding that need a new refrigerator handle. On July 19th, we ordered 3 handles from our distributor and we were told theyre on back order until September 6th. When I called at the end of August to make sure we were on schedule with delivery, I was informed they are now on back order until November 5th. I just called our part rep. this morning and now they said the current part number does not exists and gave me the new part # W11026870, and they are on back order until mid or end of November. I am not going to keep quiet about this issue. We have paid $79.89 per handle on a refrigerator that is only a 1 to 2 years old appliance. I am requesting a returned call or email on what you are going to be able to do for us. This is not right or fair to a company that spent a large amount of money to have your appliances in 264 units.

I have had my whirlpool top loader washer 2/12 years. There are 3 adults in our household, but we do at least 1 load per day. During a spin cycle we heard a loud bang and then the washer starting spinning very fast. I called for repair and was told the cost was 500.00. Now I must buy a new washer as that cost is excessive and I see this is a common problem. This new washer will not be a whirlpool!!!

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

Whirlpool has been a trusted name for us for many years. The large tub has cut my wash load in half. Large towels to delicates have never been a problem. My washer is going on 12 yrs old and runs like a champ.

Right at 18 months ago, we bought the Whirlpool Cabrio Top Load washer. The last washer we had was the bottom of the barrel Whirlpool model and it lasted 8 years. So, I had no problem purchasing the brand. But now, our washer wont go through the cycles and we hare having lid lock issues. The repair guy said the lid lock was fine which I thought was good news because he said it would be $300 to replace including his service call. Now, it looks like our choice is a $350 motherboard, or a new washer. Whats wrong with this picture? I can go to Lowes right now and buy a used one (exactly the same for $399), pay $350 to repair my two-year-old $750 washer, or buy a different washer? Its hard to believe that a $750 washer is only good for 2 years.

I bought new hot water heater. I installed it did and it did not work. I called them, and they sent a new part. A service man installed it, and it still did not work - he was unable to get it working. They said my gas supply line 1/2 od was too small. I had it replaced to 5/8 od 1/2id, and it still did not work. I called them again. They offered to send more parts and try again. This is a brand new water heater, never fired. I asked if they would give me a ra number so I could return it to the store. He would not give it to me. He insisted he send some one out to try to repair it. Meanwhile I have had no hot water for 2 days. He told me do what I have to do and hung up on me. So I removed the heater and took it back to Lowes, where they were glad to give my money back. But still, I lost a day of work and paid the gas yo bring it back. I went to home depot bought a GE hot water heater. I had it installed in about 15 minutes and it is working fine.

I purchased a Whirlpool water heater on 9/30/2011. It is leaking at the point of cold water entry and is spewing a brown colored watery substance, leaking on the floor.

Great front loading machine. Dont have the smell problems a lot of people that I know who have front load. Cleans all types of clothing very well. 13 years of reliable service with very little maintenance.

We purchased Whirlpool Cabrio 8.8 cubic ft Electric Dryer with Steam Cycles (Chrome Shadow) Energy Star Model WED8500DC and Whirlpool Cabrio 5.3 cubic ft High-Efficiency Top-Load Washer with Steam Cycle Model WTW8500DC and have had no issues at all, only personal issues, such as me being 54 tall and cant reach the bottom of the washer tub to take out all my clothes, so my husband helps, he is 5 9 tall and can reach in it fine, so we do laundry together now! We have washed very small loads to large loads such as, bedding sets without any issues at all. We love the gorgeous look as well. We have only owned these since November 2015... so about 4 months now, but we are completely satisfied! We have always owned Whirlpool, our old set we bought in 1998 and they finally gave out in 2015! Whirlpool for life for us!

Our original dishwasher lasted many years and did a good job until it didnt. We replaced it with this one that we found at Home Depot. It is not the one we wanted but the delivery was months away and this one was in stock. It does a good job in cleaning the dishes. The only issue I have is that the top rack is not designed for large mugs or glasses. The wine glass holder has 3 slots, but we can only get two in based on the spacing. Also, our mugs dont fit, well on the other side, inside the fingers. Maybe our dishes are on the larger side...I dont think so but like I said earlier, it does a good job cleaning the dishes.

Whirlpool microwave model # gh4184xsb1 handle is falling apart. I have replaced the hood vent twice and the entire door once and now, its the same problem again. The plastic becomes brittle over a year to two years of use and falls apart. Whirlpool will only stand by their one year warranty, and is not concerned about a problem that many of its customers are having. I have read many complaints on the web about this same problem. My wife and I have decided never to purchase Whirlpool products again.

Bought a Whirlpool Cabrio Washer Dryer combination on 4-5-2009, had it delivered on 4-20-2009, was very excited to get this set as it was like my first ever brand new washer dryer. I thought Id spend the money get something good and it would last for years and years. Was I ever wrong. I bought the set and the extended warranty from Lowes and my total with delivery was 2579.00. 20 days after the extended warranty expires (that I never used) the bearings on my Washer go bad. This thing in spin cycle sounds like a jet engine. I called to see if Lowes would still honor my warranty because I never used it and they said no. I called Whirlpool and checked to see if there was a recall and they said no. I checked to see if there is anything they could do at all because this is a huge known issue and of course they said no. (Just look on YouTube for Whirlpool bearing replacement and the amount of views should indicate the amount of troubled users.)Called a repair scheduled through Whirlpools website to come look at it for a 75 dollar assessment and they said it would be about 500-550 to replace the outer tub - largely due to the fact its labor intensive and the bearings are packed in the outer tub from the factory. I was like are you ** kidding me? I paid 1029 for the unit brand new in 2009 and 550 to fix? I said thank you to the repair guy and escorted him nicely out. Upon that I called back Whirlpool to tell them how displeased I am and how I will not be another product of theirs ever and mostly due to the fact they know this is a huge issue and wont do anything about it. I will be going to Lowes to see if the guy who sold me this pile of crap will work me a deal on another unit or set of another brand after I show him my receipt and express my displeasure with that product. If they wont do anything I will go to another store and spend my money elsewhere - I have choices and others do too. So if you are thinking about buying anything in the Cabrio line, dont. Go Samsung or LG - 10 year warranty straight from the manufacturer and costs 200-300 less than I paid for my washer dryer 5 years ago. The bearings are ** and shouldve lasted a lot longer for the amount I used this machine and for what I paid! Shame on you Whirlpool for using crappy parts to make your machines.

My issue is I believe that Whirlpool should pay for my tub and bearing part because the washing is only 16 months old. Because it went over the one-year warranty by four months, I shouldnt have to buy this part considering it is such a big break for such a young washer. Please advise if Whirlpool will assist me with this issue.

Does the CEO know you do not stand behind your products? My washer is not even a year old and cost about $400.00. And you have stuck about $1800.00 into repairs instead of replacing a lemon washer! The washer had problems the 2nd month I owned it and you stuck a new clutch in out. Now just about everything replaced, it still does not work so I will order more parts. This is ridiculous. I would love to hear back from your CEO and would like to be reimbursed for 5 days of pay to take off and wait for repair men, laundry mat fees, etc!

2007 we purchase a Whirlpool Casio washing machine. Rusted out in three years. 2008 we purchase Whirlpool gold dishwasher. In two years the front panel rusted out. We replaced this panel and now the second one has rusted out. According to Whirlpool they do not cover rust. When we replace the washer it was with a Samsung. NO SIGNS OR RUST IN THE LAST THREE YEARS. When we replace the dishwasher it will not be a Whirlpool. As far as I am concerned, Whirlpool products are junk.

We purchased a Whirlpool Cabrio Washer in 2010. I have had nothing but problems trying to wash black/dark clothes, it leaves white stuff. I assume its soap scum all over the clothes. Ive tried cleaning the machine with Refresh more often than recommended and it still has the same problem.

We purchase a Whirlpool washer model # WTW5000DWI, SERIAL #C842 43102 ON 10/30/2019 and it has been nothing but a disappointment. We are senior citizens living on a very limit income with several health problems, and cannot go to a washeteria to wash our clothes. We had a washer that lasted over 19 years and when the motor failed I figured it was more practical to purchase a new washer versus repairing this old one. We had a very reputable Whirlpool dealer here and was very helpful and recommended this washer and the price was in our budget! Was that a big mistake, it does not clean the clothes, does not rinse the clothes with using the 2 rinse cycle and still, does not rinse a load of sheets. I bought a large capacity washer so we could wash 2 sheets at a time. Wrong! You cannot get more than a couple inch of water on the Deepwater cycle, so its like washing clothes on a riverbank on rocks, it rubs clothes together. On my wifes good clothes it will cause little balls of fabrics on them, clothes does not smell clean, and if its real dirty clothes, it will not clean or take the stains out. Its water efficient alright, it does not use any water!Its for sale, and I have talked to a lawyer. Whirlpool customer service was no help at all/All they want was to send a dealer to check it out, the only problem if there is nothing wrong with it that will cost me min. of $125.00. Warranty will cover a manufacturing defect, not a design problem which is what this is. I will just go to small claims courts and get my money back and be done with Whirlpool, hell they dont care! I would buy any washer that is cheaper and has an agitator, without a water efficient features and is top loaded model. It does not pay in this world where large manufacturing companies dont care.

My wife and I purchased our new home in November 2014. The house was a foreclosure and therefore owned by a title company who gutted the home and installed all new appliances. Less than a year of ownership, the ice maker on the side by side fridge broke after normal use. Not having proof of purchase, I appealed to Whirlpool given the nature of my situation. They did NOTHING but try and sell me a new service agreement they offer to have it fixed. They cared little about my brand loyalty, situation or circumstances - all they wanted was to make more money off of the consumer. What ever happened to companies being accountable for the products they produce? What ever happened to companies wanting to do the right thing in order to retain loyal customers and increase satisfied word of mouth? Stay clear of Whirlpool... Theyre only out for themselves.

I purchased a Whirlpool dishwasher in December of 2015. It has had very light use, and today I found out the motor needed to fix it (it does not wash the dishes) is going to cost almost $500. Whirlpool used to be a very reliable manufacturer. Obviously, those days are gone!

These washers are known to rust terribly from underneath the bleach dispenser. Please note that if not detected within the 1st twelve months from purchase, then Whirlpool will not stand behind their product. I would highly recommend not purchasing the Cabrio top load washer. Extremely dissatisfied with this product and warranty.

Im so tired of the mold smell that never goes away, even after following their cleaning cycle many times over. I dont know what to do but I spent extra $ to purchase my washer and now this!

I bought a brand new Whirlpool fridge early June with the extended warranty to have it shipped on my moving day on June 18. The team delivered and installed the fridge and told me to wait 3 hours before plugging it. I went and spent over 300$ in groceries only to find out the fridge does not work. I waited 24 hours, still not working. I had to wait until Monday to call the customer service because it is closed on weekends. I had to throw out all my food and order food all weekend which incurred an extra 200$. I called Whirlpool on Monday and was told a technician would only come on June 30th. 8 DAYS LATER!!!!I did some research and found a certified whirlpool technician myself who was able to come the next day only to find out the fridge has no gas and this is an assembly defect - WHIRLPOOLS FAULT. Whirlpool would have to send me a brand new fridge (These fridges are NOT TESTED?!). I was asked to call to arrange the exchange, I asked for compensation as I have already spent over 500$ and now would have to wait another week with no fridge and they refused to compensate....They told me I would get a call in the next 48 hours to let me know when I would get the new fridge and 3rd day later, still no call.I received a call on Friday to tell me they approved the exchange...Really now and would have to wait another week. That is over 2 weeks with no fridge, I sent a private message last week to Whirlpool, no answer, I spoke to customer service twice, they cant help me and do not want to compensate me. I have never been so frustrated and mistreated by a supposedly « reputable » company? WORST PRODUCT AND CUSTOMER SERVICE!!! DO NOT BUY!!!!

Our Whirlpool refrigerator breaks down after two weeks of purchase. I purchased a Whirlpool fridge for my son and his wife as a house and new baby gift. Just two weeks later, the fridge was not cooling and seemed to not be working. The technician was called, and he confirmed that the fridge was not working. We called the shop where the fridge was purchased from and advised they would not refund or replace the fridge.We are now forced to wait for a replacement part that could take up to 2 months to arrive. And there is no guarantee this problem will not reoccur with a new part, as per the technician. I called Whirlpool and lodged a complaint, but that went on deaf and ignorant ears. I am told to call the service repairer. I am sure there is a law to protect Australian consumers.I paid nearly $1,000 for a fridge that is useless! I would like Whirlpool to contact me, and tell me why they shouldnt be accountable for their product. I would like to return the faulty fridge, accept a refund and buy another fridge. My family are living out of an Esky, and this is a ridiculous way to refrigerate food stuff for adults and children in the heat of northern Australia. Whirlpool, I am waiting for your call.

I purchased a 40 gallon water heater at Lowes and installed about 3 years ago. A couple of weeks ago, it got an upper sensor failure code on the gas valve. It would heat by resetting (turning valve off, waiting a minute and then lighting) but after a few minutes, it would fail again. I called the customer service and they mailed out a new upper sensor. When it came a few days later (I paid for shipping), I installed it but the same failure code. Again, the only heat I could get was by resetting the valve several times before a shower. I called customer service again, told them what I did and they said, Oh, the problem is the gas valve then. So they mailed out a new gas valve unit. It then came a few days later and I installed it according to the enclosed directions to the letter. Still got the failure code and still had to keep resetting it to get any warm water before a shower.I called customer service again, told them what I did and he said, Well, did you flush the water heater with apple cider vinegar before you installed the new gas valve? I said, No, it wasnt in the enclosed directions to do so. He said, You should have done that and it would have worked. I will send out a new gas valve. At this point, I blew up. Two weeks with no reliable hot water. I told him I want a new water heater and he refused. I asked to speak to his superior. He said no. Dont ever get a Whirlpool product. Some other crappy company builds these turds.

I bought a top of the line Whirlpool front load washing machine (WFW97HEDW0) and drier with my new construction house. After a few months the washing machine began making a loud, banging noise during the spin cycle. Then about a month before the 1 year was up the unit broke and dumped all the water in the drum into the catch pan it was installed on. I called for service and someone showed up in about 3 days. The tech opened the unit and found that the plastic/composite drum the spin unit was contained in split in half all the way around. The tech exclaimed he had never come across this issue and would report in what he found but that he did not have the part and it would most likely be a whole new unit but that its up to whirlpool to make the call. I would find out that whirlpool had decided that the unit can be fixed and they have ordered the part and would call to schedule the repair.A week went by, with no word. I called warranty service company, Via Services, and they tell me that the part is on back order and that it would be two more weeks before it would come in. Now were looking at being without a washing machine for a month. I communicate this to the builder and they somehow get whirlpool to come out a week earlier than they said they could. The day came for the repair and two techs take nearly 8 hours to repair the unit (how is this efficient?).After the repair the unit ran with an odd noise that I attributed to the way it was stacked. A month goes by and two days after the 30 day repair warranty I go to do a load of laundry and the unit turns on but wont run. I called for warranty work because it was clearly not repaired sufficiently. I schedule a tech visit which is for a week after. The day come and the tech says he cant fix the unit without charging me for the repair because it is now out of warranty and if I have the extended warranty then I need to set that up with the extended warranty group. I send him away because I had just paid for the extended warranty. I called whirlpool for the extended warranty work and they schedule a repair contractor to come out in 3 days.The repair contractor calls me directly to confirm if the unit is side by side or stacked. I let them know that the units are stacked and they say they cant repair it because its a two tech job and they dont have enough techs. They send me back to talk to whirlpool. Whirlpool then notifies me that because its stacked I have to either unstack it myself or hire someone to unstack it for me. Well, I cant unstack the unit by myself and why should I have to pay someone to unstack it when thats what the unit was designed for? At this point I am going back and forth with the builder to get a refund so I can replace the unit. I will forever steer clear of any whirlpool or subsidiary products. The products are flimsy and the service is no better.

Do NOT buy the Whirlpool Cabrio washer...it doesnt actually wash your clothes! Most clothing still half dry after the wash (didnt get any water on them) and they are still smelling sweat after the wash! Also doesnt clean basic stains that others washers clean. Even if you add water manually to the washer to soak your clothes, the clothes on top wont be agitated at all, hence the reason the clothes are still dirty after a wash. Poorly engineered washer... its a lemon as it doesnt do what it is supposed to do (wash clothes). Biggest scam ever from Whirlpool and shouldnt be allowed to be sold to consumers anymore!

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

We purchased this Kitchen Aid stove December 7, 2016. I dont use the oven much, but have found that when it gets a little dirty and I use the Aqua Life function, it does not clean. Have tried by setting a pan of water in the bottom and raising the temperature to 300 degrees, but nothing cleans. We went with this feature to be more environmentally responsible. Leons, where we purchased the stove, claims that they have heard nothing of this issue and have not been informed of this by their head office.

Whirlpool Dishwasher Model WDT7820PADMO was installed last October. Small parts began detaching themselves from the first day. Then machine leaked onto floor two weeks ago and I shut it down. As it was purchased from Sears, they and Whirlpool have batted responsibility for repairs back and forth until proof of extended warranty was supplied to Whirlpool. They then scheduled a repair job for a week later with an unqualified technician, who naturally refused the job. Upon callback, I was rescheduled for a day two weeks hence. As it turned out, the repairman would not be near my home on the appointment date. Luckily, I tried to move the appointment up, as the repair service said Whirlpool did not supply proof of the extended warranty. I saved five days waiting time by rescheduling, but have to supply proof of extended warranty yet again. All this for a dishwasher that takes three hours per load, and doesnt do a particularly good job of cleaning.

Freezer side went out on model# ed5kvexvl00. Fridge is less than 2 yr old. Didnt expect anything to go wrong so quick. The extended warranty, I did not purchase. Replaced relay switch - no changes in problem... Contact them (Whirlpool) and like every else, got nowhere with them. 3 weeks and no fridge... Hopefully the compressor is not bad. Will find out soon. I will be researching before I select new appliances in the future. They need to be ashamed of themselves.

Bought new Whirlpool duet washer 4.0 couple years ago. Started making load noise. Started checking and its the rear bearing and sounds of it will cost more to replace than to buy a new one. Found this page and after reading review after review, I will not spend a dime to fix the junk product from Whirlpool. Going to put in the dumpster and never buy another Whirlpool product. I have never seen so many complaints about a product and many being the same bearing problem. Where is our recall process? Its ok to rip off people over and over with no consequence. And why do large chains keep their product? Guess theyre in on the rip off.

Horrible. We purchased the set In October 2010. It worked great for a little over a year. (Go figure, just out of the manufacturers warranty.) The washer stopped spinning out water. Every other cycle completes successfully. The diagnostic cycle is also successful but once there is clothes in the machine, it wont spin. I called customer service and was told that a one year warranty was $230 and service is $130 plus parts. After reading another horror story, it seems that this venture is going to cost us around $450 for a new circuit board. Where is that class action suit at again?

We purchased a Whirlpool oven a year and a half ago. Today the interior glass exploded while cooking frozen French fries. Whirlpool customer service indicates that this is unusual. Whirlpool indicated that the only way they will repair it is if we pay $375. We declined to pay an additional cost for this product which failed to function safely. In a quick Google search, it appears that the oven glass fails more frequently than represented by Whirlpool. We are disappointed in this product and the companys customer support and lack willingness to correct a product safety issue.

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

Very unhappy with my top load washing machine. I use more water. Can wash fewer clothes and clothes do not come as clean as with my older Whirlpool. This machine needs a SERIOUS AGITATOR. Will not buy another Whirlpool.

I found this site while looking for a part number for the thermocouple. Lowes had one, but not for the FG model. I decided to call the number on here from Chris to see where I could buy the correct one with left-handed threads. I was told that they would sell me the conversion kit, but I couldnt get just the $8 thermocouple. Then $47.90 later and the conversion kit is on its way. Im not happy about it but at least I got 6 years out of my water heater before the thermocouple failed. The plus side is next time, I can get the $8 part from Lowes and not be without hot water for a week.

My $1800 French door refrigerator is only 20 months old and the ice maker has quit working. They sent out a repair person 5 times and replaced parts three of those times. Now they are saying it is unrepairable and are refunding my contract fee of $345 and leaving me with a broken ice maker. When the problem started it was making ice just not dumping it. Now it doesnt even get water. Throughout this all, two months, I have had to constantly call them to find out our next move. They say someone will call me in 2-3 days but they never do. One of The last people I talked to said, Well you can still keep food in it. I dont feel that is reasonable considering I bought a refrigerator with the ice maker in it. I finally called Whirlpool corporate instead of the service contract people to see if anything could be done and was told someone would call me back in 2-3 business days. Well its been a week and big surprise - have not heard from anyone. It is looking like we will have to purchase yet another refrigerator in less than two years. The service people I talked to were rude and really didnt seem to want to help at all. I believed when I purchased this Whirlpool product that they were a reputable company. Sorry to say that is not the case at all. I dont know if the refrigerator is really unrepairable or if they just gave up trying to find the issue. Seems hard to believe a basically new appliance cant be repaired.

I purchased a Whirlpool Cabrio washing machine April 2016. I was so excited to have a new washing machine. I thought the 1st couple times I used it I just didnt have settings right. It uses so little water it doesnt get all clothes wet. If they are not wet they cant be clean. So I started doing very small loads. Then clothes were not clean. They stink. So I have tried every detergent out there. Nothing helps. Another thing it takes an hour or longer per wash to get not so dirty clothes. Not to mention it puts holes in my towels. I tried reaching out to Lowes where we bought it only less than 4 months ago only to be told they would contact Whirlpool. Whirlpool wanted to send tech that I would have to pay for just to tell me that the piece of crap washing machine is doing everything the manufacturer made it to do. I told him I was not going to pay so. I think with all the problems people there should be a class action lawsuit. DO NOT BUY CABRIO!!!

I purchased a Whirlpool WFW9050XW washer in Aug 2011. I have had nothing but problems. Sears sent repair tech 2x; it would work for a couple months and stop. Whirlpool has sent new motor, tub, switches, etc. I feel I bought a lemon and I want Whirlpool to replace the machine.

Extremely disappointed in Whirlpool oven! Built new home and this was recommendation by BAC Appliance. The oven does not self-clean well at all, and my spills are minimal. Deposits between glass doors that cant be removed. Oven is barely cleaner than before I cleaned for full cycle. Oven suddenly shuts off for a short while and then restarts. Steam comes when using lower oven and removes finish on upper oven. I expected Whirlpool to have a quality product. Definitely not! BAC really had no answers for me.

I bought my Whirlpool Cabrio Washing Machine in 2010. I hate it 100%. I have never used bleach in the machine. I use liquid detergent only. 2 things happen every day: #1: When I wash a load of colors, I take them out when complete and there is dry white powder like substance over the black clothes. It looks dirty but it just got washed. #2 About once a week, I will pull something out of the washer and there is a bleach spot on it. The last item that this happened to was a $200 sweater. It went in the garbage. This should never of happened with an $800 washing machine.

We purchased the Cabrio Washer and Dryer from Lowes during a Black Friday sale, November 2016. The items were delivered when we closed on a new home. Thus, we didnt start using the washer and dryer until 3 months after purchase. One month after usage we had our first service call. To the point, what the other reviews say are the exact experience that we are having. Unfortunately, we did not do our research before buying. The washer: Clothes come out wrinkled, littered with lint, and the wash cycles are excessively long. The dryer: Clothes take a long time to dry, and most times we run the dry cycle twice because, after the first cycle, the clothes are still damp.Even though the washer and dryer can accommodate larger loads, we are forced to break out the laundry into smaller loads to get better results. Still, doing the laundry is negative experience with the Cabrio. Recently, it took nine hours to fully complete 5 loads of wash. That included the dryer cycle. The repairman said that he is well familiar with the issue. It is the new technology. The software is incredibly sensitive and can fault easily. This leads to another negative feature. The software is restrictive leaving the user with little control over how they want the wash and dry cycles to perform.Going back to the conversation we had with the repairman. He said he had a Whirlpool washer and dryer at home that was over 10 years old. The old fashion kind with the dials and less complicated technology; and he has never had an issue. I have to agree with that. Our second home has the Whirlpool Duet (washer and dryer) that are 13 years old. Never had a problem technically and with washing and drying clothing. We plan to try to contact Whirlpool about their return policy. Not a quality product. Definitely cannot recommend this washer and dryer. We truly purchased junk.

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

The board manufacturer number W10312659 went out. They replaced the board. The oven was 6 months old, luckily was still under warranty. We didnt purchase a extended one because mostly it had a good name and brand. Well after a year and a half the board went out again. It gives error code H5P which there is no error H5P. So the boards out. It is very costly and thats with you doing your own service. Never will I buy another Whirlpool stove.

My Whirlpool refrigerator is about 13 months old and the paint is peeling off. I was told my an associate at whirlpool that I could have a service person come replace it for approximately $500. And this is only for one door not both.

We have had this microwave 3 years. The first thing we noticed was that baked potatoes were way overdone and nothing heated up correctly when using the sensor Not a big deal - just stopped using the sensor button. Now, we keep getting the open/close door message keeps coming up. I have done all the recommended fixes with no luck. Now we need to have a repairman come out to fix it. It seems when you are paying over $300.00 for a microwave, it should last longer. If I had known it would be such a poor quality, I would have bought a less expensive one and definitely a different brand. We do not use a microwave on a daily basis, so it certainly did not crap out from overuse. I would not recommend this to anyone. Save your money or you will be spending much more on repairs.

I replaced a 4 year old Whirlpool dishwasher with a new Whirlpool dishwasher on 01/18/2019. July 2020, dishwasher failed. Finally got Whirlpool to send out a repair technician and was advised that the sump and motor had failed. This is after only a year and a half. Whirlpool will not back their product because I did not send another $200 for a service plan. So basically whirlpool cant even guarantee that their product will even last a year.My 4 year old dishwasher had the same issue which is still unacceptable. I have a Whirlpool refrigerator that almost burned down my house and just replaced a failed Whirlpool stove with a Samsung. I wish I could say what I am replacing this dishwasher with, but I am too frustrated to even look for a replacement after only a year and a half. Replacement parts will cost $250 just for me to do it myself. Do yourself a favor and research the product. Should you spend more? I cant answer that. I have seen 20+ year old Frigidaire dishwashers still working. I honestly dont know what brand to get, but I do know that I will never purchase another Whirlpool product again, and neither should you.

We purchased a Whirlpool Accubake Drop-in Stove (Model # RS675PXG015) on 10/21/2006 from Lowes Companies, which cost $1,100.00. In 11/2012, we had an error message E1-F2, and we tried everything to get it to clear - all suggestions given by electrical repairman who does repair for Lowes Cos. The stove is porcelain, which also has problems of staining that cant be cleaned. We were told the repair would cost $200 for the panel, and if that doesnt work, another $400 for the other panel. In reviewing other complaints for this Whirlpool stove, there are enough complaints to recall this item or at least give deep cuts for the parts to repair this stove. We have purchased other Whirlpool items, and this one is not well made and too costly to repair. It should last at least 15 years or more. Cant Whirlpool do something about this obvious problem?

GX5FHDXVY04 French door fridge. Ice maker backup issue - which cause water to build up and leak out of fridge. Fix was a known issue with a rubber grommet - $100.00. Fridge stopped blowing cold air - control board - $293. Fridge stopped blowing cold air again! Getting Nowhere with Customer service... Whirlpool used to be a great brand. They have lost me as a customer, and by the looks of this board, Facebook page, I am not alone!

I have had a Whirlpool hot water tank now for about 7 years and all I have had out of it is trouble. It wasnt even a year old and I was putting a thermocouple in it a few months later I put another one in it. All I do is put thermocouples in it. I have saved the old ones. This heater is a piece of junk and I am the one whos paying the price for it. I just put a thermocouple in it on January 9, 2012 and I am putting another one in it on January 15, 2012. I have replaced all parts and it still does it. They are going to buy me a new one someday. I’m tired of this. This should not be happening. They are ripping people off. If the pilot light does not light, you have to replace the thermocouple in it.

It goes off balance, frequently. It is moldy and stinky. I wipe it out, use a cleaner and leave the door open, but it still stinks. I am getting rid of it and buying a Speed Queen top loader. I am extremely disappointed in the front loader Whirlpool.

Rust around the inside of the top of the washer. They do not use stainless for this part of the washer. It is some sort of cheap tin material that will rust in less than the first year. They have gone cheap on building but still think their products are worth the expensive price they ask. Do yourself a favor, pop the lid and look under what they do best to hide and also they removed the pop down door on the dryers so you cannot vacuum out the excess lint build up. Tragic lint gets hot and starts to burn in the gas models and stink. They should be ashamed of themselves. They have bought up most of their competition and now they have gone cheap on product production but not on price.

We went out and bought the new front loader washing machine and dryer. Neither one of them works correctly. A service call had to be made the the day we ran the first load. The washing machine only washes errors popping up F8 and E3. On the dryer error code E3 pops up and cannot dry clothes. Worst purchase I have ever made.

I would like to know if anyone else is having trouble with the broiler unit. The unit quit working. Thankfully I had purchased the extended warranty. The guy came out, cleaned the orifice and called it good. The next day I went to use it, and guess what, it did not work!! So we thought maybe we needed to leave the oven door cracked open a bit... Well, guess what... It melted two of my knobs!! We called, got another guy out here. He checked everything. Even pulled the stove out to check out connections. Then he informs us that you can set the broiler to whatever temp you want. Thats new. So again, we try the broiler.... Guess what... It got to the temp and clicked off. Now I ask, how does one broil a steak if it does that? I did call Whirlpool directly and got nothing. Our model is WFG361LVQ2. So please, if anyone out there knows that this is how it is supposed to be... please let me know.

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

I purchased my Whirlpool washer and dryer 4 yrs ago. I was planning on purchasing Samsung but the saleswoman at Gils in Bristol, RI strongly recommended this junk!! A washer and dryer should not quit after 4 yrs w/ a household of 2. The dryer never dried properly. Each load took 2 cycles. Yes, repair were called and we were told its a design flaw. The washer just stopped spinning. Repair will would have been $550. These pieces of junk were replaced by GE electric stackables. Fingers crossed....they are working satisfactory!

I received this Email from the Whirlpool Director of Consumer Care to evaluate my experience with their customer service department. I filled out the survey over a week ago including a complete documentation of my problems and have not even received an acknowledgment of the survey or promise to look into my problems.In the last 7 months I have experienced problems with 2 Whirlpool major appliances which both appear to be unrepairable and which have been unsuccessfully brought to the attention of your customer support group. In March a fridge and in October a clothes washer. Both were high end products roughly 3 to 4 years old. I did not have an extended warranty with the fridge so I dealt directly with the customer support group. However I was covered by warranty with the washer and your distributor Bad Boy have been making the calls on my behalf but have been just as disappointed to date as I was.Both cases were very similar. In both cases the repairman came out within a few days and promised to return the following week with the broken part but I have never heard from either one of them EVER. In the case of the fridge I was told to defrost it the day before the promised repair date and lost all the food $$$. At this stage a number of calls went out from me to Whirlpool for the fridge and from Bad Boy for the washer and eventually we both got a new delivery date of roughly one month. Both times the date passed with no shows and no call backs. Repeated calls later to the customer service group, with promises of EXPEDITING the delivery, the fridge part delivery date was extended to 3 months so we had no choice but to buy a new fridge. As for the washer, Bad Boy even had an unsuccessful face to face meeting with your representatives and we have had no word back or expected delivery dates well into the third month.I HAVE NO IDEA WHAT TO DO? I have made so many calls with so few call backs and no clue what to expect or when? Your representatives use the word expedite with no idea what the word means. At the suggestion of one of your representatives I even called one of your distributors Sears to see if they had the part. Their Canadian head office is in the Philippines and they said they had the same problem with Whirlpool. Twice I tried to talk with your representatives supervisor and both times were unsuccessful.In a world of computers where it should take seconds to find inventory parts and expediting packages usually refers to next day delivery, the fact Whirlpool requires months is unbelievable. The only explanations I can come up with is 1- You dont make parts for your appliances. 2- New appliances are made so poorly all parts are gone. 3- You could not care less about your customers. 4- You dont own a computer. Most of our appliances are Whirlpool because we thought you had a good reputation. We had to purchase a new fridge and still have had no word on the washer?

Love the chrome exterior and overall appearance of this side-by-side. The compartments and shelf spacing are well thought out & offer flexible adjustments. The outside components on the freezer (crushed ice, ice water, ice cubes, & light) I love, and most importantly the unit comes with a built-in replacement water filter.

Own Whirlpool GB2FHDXWS04 refrigerator for 14 months. From the beginning, the ice maker made gross tasting ice and never got better (had to start buying ice). Then a smell started coming from the fridge every time the fan came on. We called before the warranty was up and talked to Whirlpool, and they said that we must have put something smelly in the fridge that caused the plastic to absorb the smell (which we didnt). They told us to put baking soda in and change it everyday. No change. They kept telling us there is no way it could be giving off a smell for any other reason and if they sent a tech out, we would have to pay for it. Trying to intimidate us until the warranty was up. Then after a month or so, the bottom mount freezer starts leaking water all over the wood floors every 3 days. At first we turned off the water line, but then realized it is coming when the freezer defrosts. One good thing, the freezer, from the beginning, knocked really loud and now that its leaking it doesnt knock. We spent $1,200 just over a year ago and will probably have to go purchase a new one now. I will tell you it will never be another Whirlpool product. Whirlpool has not apologized or done anything but say, Now your warranty is up, you should have bought the extended warranty. Great customer care! With all these same complaints, you would think Whirlpool would figure the problem is their inferior product (which they know) and actually take responsibility.

I purchased a Whirlpool washer, dryer and dishwasher in 2004. The dryer and washer paint is peeling off the appliance and is rusting underneath. The dishwasher has never dried the dishes appropriately, it takes a few days to completely dry the dishes. I have lodged this complaint with customer service, also. I have always purchased Whirlpool, but I will never again nor will anyone in my family. I feel that Whirlpool should at least look into the problems and not just verbally apologize. Janice **

We bought our washer about 3 years ago brand new from Lowes. Like others, I have had problems with holes in clothing and spots that looked like grease. It worked well up until recently when we noticed some brown splatters on the floor. Shortly after it made a loud noise like a plane taking off and the load would become unbalanced. We researched and found many people were having issues with the bearings going bad. My husband was going to order parts to fix it but you have to have a special tool that is expensive to buy... It was going to be almost $200 to repair ourselves! He called a washing machine repair man and he said he doesnt even touch them because the repair wont last. I guess were going to be better off buying a new washer. There really needs to be a recall on this product!!!

Microwave didnt even last 2 years. I bought all new Whirlpool Appliances less than 2 years ago & they were not cheap! The microwave wont work until the light comes on inside. Well for some reason now it takes almost 10 minutes for the light to come on & I have to leave the door open until then. Now today I cant shut it because the light wont shut off & if I try to shut it the fans runs constantly. So frustrating as they dont stand behind any of their products! I will never ever purchase anything Whirlpool again.

We are now over a month without a working fridge/freezer because of the lack of Whirlpool care. Our brand new Whirlpool fridge stopped working after 3 days. That was nearly a month ago. I have wasted hours on the phone with rude reps from both Home Depot and Whirlpool. A new one with multiple dents was attempted to be delivered today which I wouldnt sign for knowing Id be stuck with it. Now we have to wait 2 weeks for another one. A $100 compensation doesnt nearly cover our food loss let alone a family of 4 living without a functioning fridge and freezer. I will never purchase Whirlpool again!

It took several delivery attempts to get a refrigerator without cosmetic flaw and it only lasted four years before Freon leak in evaporative system occurred. It would have cost more to repair than replace. Needless to say, I replaced it with another brand.

DO NOT buy Whirlpool branded electric ovens. Whirlpool put out an update and it fried the control board of our electric built in oven. They refuse to fix it. They have kept us on hold for two hours and then tell us there is nothing they can do to fix it. We had an extended warranty that just “disappeared from their system.” They told us someone would call back us but no one has. This was an update we were told we had to run in order to use the associated APP. Our oven is only 2-years old. We now will need to pay for the repair ourselves. DO NOT BUY.

In January 2021 I purchased a front load Whirlpool washer and matching dryer. They were delivered on February 6 2021. The first load we found water on the floor. I thought I didnt close the detergent drawer so I proceeded with the next load. Again I found water this even through the ceiling tile in room below. So with the next load I sat in laundry room to see what was happening. When on the rinse cycle water shoots out the front of the dispenser drawer.Contacted service, they sent repair man. He ordered new parts and I waited over 3 weeks for next repair call to find out that whirlpool had part all along. Repair man came again and still no resolution to issue. He was told to order same parts again - still no resolution yet again. I fought with Whirlpool till they said they would give me a new machine. Now fighting because delivery people wont uninstall 1st washer and install new machine. Today is June 28 2021 and I still DONT HAVE A WASHER TO USE. I havent even used the dryer yet. I have $3400 and numerous hours with Whirlpool trying to resolve this issue! Can you help? Whirlpool continues to string us along, telling us to be patient, theyre doing their best.

I purchased whirlpool Model# WFG540H0ES gas with convection. I purchased it because the price was $1000 dollars less than comparable ovens and even now the price has gone up $300 since I purchased it. I really wanted the luxe look at a discount price, a burner that you could lay a grill over, and five burners which it provided all of those things. I hesitated to buy this oven because the door fell off the last Whirlpool within three years and they refused to fix it so I tried not to buy this brand but it had the amenities I wanted for the price I could afford. I really like the oven. I like the oven the best because it really does make a great cake. I like the two large grates that sit across the oven. It makes it feel high end. If you dont wipe the range immediately grease gets stuck on the range and is hard to clean. This is what I like the least. Im ready to wipe on the weekend and its too late. It took me four days of internet comparison to decide on this one. The house is not painted, the cabinets are falling off the wall literally but I am extremely proud of this oven and it makes me feel affluent even though Im not.

We bought a Whirlpool microwave model # GH7208XRY4 at the Habitat For Humanity store. It was brand new still in the unopened box with the warranty card in the box. The box was undamaged and in perfect shape. We loved this microwave until six months later, it started to throw a code F6 and wouldnt work - it wouldnt turn on or off and we couldnt use it at all. Since this is an under the cabinet model, it was a little hard to uninstall it as its a built-in. I called the customer service center and they dont cover it because the ordinal purchase date was 2012, we bought it in Oct 2014. I guess someone bought it in 2012. They say that since the ordinal purchase date was 2012, they dont warranty. They also said because I had bought it from the ReStore, it was a donated item and would cover it. I told them the box was unopened and it worked for several months, so their stand was it might have been damaged when I bought it. Again I told them it worked for 6 months, so how could it have been damaged when I bought it? They were very unhelpful.