I did not purchase the washer (Cabrio Top Load Clothes Washer) but inherited it in a home sale. Never had a non agitator. I was excited for this new washer. After a week I knew why they left it! My clothes did not seem clean; stains were still on them, when I used the delicate cycle a pair of pants went in folded and came out folded!!! I also would have to redistribute the clothes every time I had a load that was larger than five pieces, because it would stop. I would actually have to take clothes out and spin what was remaining then put those in the dryer and put the other clothes back in and spin those again. I was told I needed to use OxiClean on top of my normal detergent in order to get my clothes clean. Never again will I purchase a Whirlpool. Just bought an LG; fingers crossed.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

Fridge was purchased in Feb 2012 from one of the home improvement store chains - along with an extended warranty. It worked flawlessly for about two years, at which point it began draining into the freezer compartment and eventually onto the floor (up to a quart or more at a time). Initially this was a rarer occurrence, happening once every few weeks - but has recently become more and more commonplace.The extended warranty purchased with the appliance covered direct repairs, but am told it will not cover the associated damage to the hardwoods. The local technician contracted for repairs was familiar with the root cause and was able to diagnose immediately upon viewing the brand and style of fridge. As was explained, the drain systems are of extremely poor design leading to icing and blockage of the drain itself during defrost cycles. The only fix at that point is to essentially turn the refrigerator completely off (remove power) and manually defrost the entire thing. The repairs were conducted same day as this review, and as such I am unable to say whether or not the fix is a lasting one.As a note, Ive not experienced any other mechanical or electrical failures or shortcomings with this model. It cools effectively and properly and has not had any history of trouble with making ice - as some other reviewers have experienced. The door containing the ice dispenser (left side) however, does not stay open, swinging shut from full open in a little over 4 seconds. Im still awaiting a complete estimate on the floor, but an initial value on damages is in excess of $1,000. Given current knowledge and the opportunity to choose again, I would select another manufacturer.

We bought all new Whirlpool Gold appliances for new house. Fridge stopped cooling within 8 months, placed warranty call, couldnt get to us for a couple weeks (this is in July). Was told everyone was having problems...so sent us a brand new fridge...happy!! Little over a year later started having problems with this one and was told no warranty, didnt transfer to new fridge and no one offered to sell us a new one at the time, so repairs were out of our pocket. Had new condenser installed, still no ice, had circuit board installed, got ice but refrigerator section isnt cooling after almost $700 out of pocket...dont waste your money on a Whirlpool. So disappointed.

Whirlpool stove, product ID WFG540HOES. I purchased a whirlpool gas stove in 2014 for a lake house. Came to my lake house to find the temperature was 90 degrees inside and the oven was running full blast. The oven had turned itself on. Whirlpool appears to be having a problem with this type of issue. Called their customer care department and was transferred to the appliance safety line which was only a line to leave a voicemail. Very bad customer service. My kitchen countertops and kitchen floor will need to be replaced, also cannot get rid of the burnt smell in my house. Do not recommend purchasing Whirlpool appliances.

I just finished reading multiple complaints that sound very similar to my experience in 2014. I bought a fridge for a rental unit in Oct. 2013. The freezer malfunctioned and froze up in back, 6/2014. Had multiple repairs with the problem going unfixed. After a couple of months with my renter without a fridge and laborious system requiring multiple phone calls on my part to get an exchange approved. The exchange went thru. It was delivered the am of Sept 11. Guess what? It was dented on the side. The delivery personnel thought is was prior reject and it was an attempt to get me to accept it as is with a small cost reduction off the original purchase price. NO thank you! So still no fridge from Whirlpool as of 9/13/14 that is functioning from Whirlpool and yet to have a call back from Whirlpool regarding the mishap. No apology, no remorse, just the way they do business. I will say that my local HOME DEPOT was willing to send me a loaner fridge for my renter for his garage. NOT ideal but better than nothing and quite nice of them and an example of what customer service should be! Thank You HOME DEPOT! SHAME ON WHIRLPOOL! Not sure how this will end but obviously is common them after reading the reviews. I am now concerned if they do replace it again with an undamaged fridge it will repeat the same dysfunction pattern and I will have to go this painful process all over again! EEEEK. Refrig WRT771REYBOO, VS33469859 BTW I had to pay for spoilage of food for my rent on multiple occasions because the repairs work for a week or so and my renter would stock up the fridge and it would go out and he would lose food. Whirlpool gave me a 50 food spoilage card after much complaining bc go figure the warranty does not cover food spoilage but apparently the extended does. Go figure?

We did our research and wanted to buy a new washer and dryer with a trusted brand that would last. Our previous washer and dryer (different brand) lasted almost 20 years. Our new Whirlpool Duet HE Front Load washer only lasted about 2 years. The washer started making a terribly loud noise when spinning. We had a repair guy come out to evaluate the problem and provide an estimate for repairs. He said the drum, bearings, and truing was all one unit and the repairs would cost more than the washer. The factory warranty is only a year. BIG disappointment in Whirlpool.

Everything I buy from this company breaks all the time. I purchased these brands hoping they were good but apparently not. Always have to get them serviced. Lately they did an exchange on my fridge. Hope it helps because after thousands of dollars of food in the garbage it better work. And the washer thought, Oh Im paying more. It will be good. At this point will cost me less to buy from another company. Buyers beware. Cause the company cant do nothing good for me so dont buy from them.

I bought a whirlpool cabrio with high hopes. Unfortunately, it has been the worst washing machine I have ever had. Then I moved in with my fiance and he too had a cabrio. It too is a piece of junk - and brand new! Every load comes out with left over residue and the clothes look worse than before they went in! I have tried everything and I do mean everything! IM 41 y.o. - IM well aware of how to load a machine. I load it just the way the instructions say: as if there was an agitator there. Ive tried using no laundry detergent or fabric softener - clothes still come out disgusting. Ive made sure the screens are clean, doing extra small loads, turning on the extra rinse, everything! Ive called whirlpool, but there is no such thing as customer service anymore. They just blamed me for not loading the clothes properly and blew me off. The machine becomes unbalanced very easily (it is leveled on the floor), sometimes the clothes are still soaking wet at the end of the cycle and sometimes all knotted up. This is a horrible machine!! I wish I could say it makes me feel better that IM, by far, not the only one having issues with this piece of junk!

I am a fan of Whirlpool and I think the issues I have with this Duet machine is more because of the style but who knows. This is a front loader with lower water usage. It would have never gotten my sons sports uniforms clean. Never. The gasket around the front loading window frequently clogs so water doesnt drain. And perhaps worse, the drawer where detergent goes stays wet so it had gotten moldy and I didnt realize it. Now I remove the drawer after every wash so it can dry and I leave the loading door open as well. That just seems like a major design flaw and health issue.

We bought Whirlpool duet front loading washer and matching dryer. In 3 years the water level seemed like it was off. Clothes, especially towels were coming out stinky. Eventually you could hear the clothes were merely flopping around wet. Before we could order the repair part it completely quit and locked our clothes into it. I washed my clothes at my daughters house for a week and dried them at home. Within the week the dryer quit. Not having the money to repair both machines, my son gifted me a set of top loading washer/dryer. Again Whirlpool. In a week we had repair service out. They replaced everything possible and it still didnt work right. Since the 90 days from purchase was approaching we returned it to the store and they had Whirlpool send us a brand new dryer. This one worked for a month then stopped spinning. I havent called for service yet because now with 3 broken machines I am so disgusted. When I think about them I feel like I am going to puke. My washing machine shouldnt be the worst thing in my life, especially since it was a lovely gift from a wonderful son.

Brought a five burner Whirlpool range on June 9, 2018. On Christmas Eve the door fell off and I had a house of 20 guest. Couldn’t cook at all, and cook Christmas either. Call them immediately on December 26, 2018. They set up a schedule for the following week on Monday. The man showed up. Could not believe how this could happen is that he had ordered me a whole new. Dealer said it will be back on Thursday or Friday that week. The serviceman still hasn’t called and it’s Friday. Called the serviceman no answer so here I go another week or two with no oven. The oven door fell when I opened it to take food out and fell in my legs. Have a nice black and blue. Maybe I should think of suing them instead of getting it fixed.

Whirlpool refrigerator model GX5F-IDXVB07; S/N K23918029; 24.8 cu ft purchased for almost $2,000 on 1/7/2014. Before it was four months old I had spoken with store about it frosting up the freezer drawer several times. Finally found it wasnt level and drawer was hanging. Ok figured it was ok, even though I had other issues with it. I took the cosmetic issue of false height on door, which made it seem larger and drastically size reduced produce drawers which made it necessary it actually cut off celery two inches to fit in drawer and door nooks being so narrow that they only fit 3 small condiments in them on the left door and its a trick to fit thing in the right, but since they are deeper can fit a little more. Ok thats my fault for not actually measuring. But who takes condiment jars shopping?The killer is that a leak in the ice maker, lets water/ice to build up under the ice maker on floor of freezer drawer. It then freezes there and if we dont take out the drawer and remove the ice chunks by hand it thaws and runs out in the floor about once a week. The leak began to be worse in August 2014. I understand it will need repair. What makes me really upset is the refrigerator is supposedly a very good brand and I have had so many issues with it that I curse it regularly. A two thousand dollar fridge with this many issues and I am stuck with it. I guess I should have contacted company before warranty went out, but we would get it past a problem for a while, then it would come back. I am just sick that I ever bought it in the first place! I hate it and will never buy or advise anyone else to buy from Whirlpool again. Quality is awful. Looks good on surface, stinks for quality.

(Model WTW5640XW3) Whirlpool Cabrio worked Good for 11 months (just after warranty Expired). Replaced capacitor would not spin, hums loudly and smells like burning Plastic. Then about 2 months after that Lid locked, failed, replaced. 7 months then Actuator failed and now looks like the Main board give up. I dont know where The original parts are made but they are Cheap junk. New technology is crap for Washing machines, gears transmission and Solenoids last a lot longer plus they clean your clothes. And belts and solenoids.

Whirlpool Cabrio washer - Do not buy this washer. I have never placed a comment on the web before, but after reading about the same problems over and over, there should be a class action suit. The spin cycle will not balance. You have to stand over the washer and readjust the laundry. I called Whirlpool and I was told to unplug unit for 5 mins. This is a $800 washer that lasted about 2 years.

We purchased a WRS576FIDM refrigerator from HHGregg in August 2015 and immediately had problems with ice maker and door having condensation on it. I contacted Whirlpool who had a tech come to my house and verify problems. Whirlpool replaced it with a new refrigerator in November 2015 and w/in a week it had awful condensation on the outside of the door, dripping onto the floor and pooling water. A tech responded to our house again and confirmed the problem with Whirlpool. Whirlpool advised they would be sending out two new doors for our side to side refrigerator and said we should receive them within 4 to 6 weeks from late November 2015. I asked Whirlpool to send us a different model because this is the second refrigerator of the same model that has the same issues. Whirlpool refused. I have spent countless hours on the phone with Whirlpool, HHGregg, and waiting for service appointments and my patience is getting thin. I just contacted them today 2-9-16 to inquire about my doors since it has been well over the 4 to 6 weeks Whirlpool said it should take to receive them. The Whirlpool rep on the phone had no information about the status of the doors and said that they would have to contact the service company to inquire more about the status of the doors. He also said that under special circumstances, it may take an additional two weeks for certain door orders. I once again requested a different model of refrigerator or a refund.I tried to get HHGregg to allow me to return the 2nd refrigerator just days after I received it since I was having the same issues as the original one I purchased. HHGregg said they could not since the 2nd refrigerator did not come from them. HHGregg said that they did not know why Whirlpool sent me a replacement refrigerator directly and added that normally the returns go through them. I feel like I tried to do the right thing by contacting Whirlpool for warranty work, but I feel that if I would have called HHGregg I would have been able to get a different brand refrigerator which is what I really desire after all these problems with the Whirlpool brand. I did purchase an entire Whirlpool kitchen set from HHGregg. The only problems I am having is with this refrigerator.

Horrible. We purchased the set In October 2010. It worked great for a little over a year. (Go figure, just out of the manufacturers warranty.) The washer stopped spinning out water. Every other cycle completes successfully. The diagnostic cycle is also successful but once there is clothes in the machine, it wont spin. I called customer service and was told that a one year warranty was $230 and service is $130 plus parts. After reading another horror story, it seems that this venture is going to cost us around $450 for a new circuit board. Where is that class action suit at again?

May 16 - July 25, 2014. Took almost nine weeks to get the replacement. Numerous service calls. Their tech said self-clean feature should never be used. In addition, I heard that the techs are only paid for one service call, no matter how many times they come. And, they cant fix this oven. It has to be replaced. Nightmare and very dangerous. Most American families cannot wait nine weeks for a new oven to be fixed/replaced.

Since purchasing original refrigerator 2 years ago I have multiple problems. Freezer was icing up to the point where drawers could not be opened, after numerous service calls, door was replaced which did not resolve problem. Refrigerator was replaced on warranty. Soon after light control circuit board had to be replaced. Next light control had to be recalibrated. Now, with the unit being approx. 1 yr old, rust spots are appearing on freezer door. Whirlpool rep advised this problem is not covered on warranty and would not provide any information as to what company contacts could be used to pursue the issue. Very upset and disappointed with product and customer service.

After reading endless stories regarding Whirlpool water heaters, I ended up here and read numerous complaints and every company response had the same message from Chris-- Go to whirlpoolwaterheaters.com/help. I went to the website and called the number (877) 251-1679. I spoke with the most helpful gentleman (Lenny) who helped me troubleshoot some things and even called me back to inquire regarding success and gave me other tips to check if the problem occurs again.

I bought a 38 gal. low boy electric Whirlpool water heater from Lowe’s. It was replaced because of a leak around the upper heating element after only one year. Now, the replacement heater is leaking in the same place, and it has been leaking so long that the electric terminals are rusted, water is standing in the cover plate, and the lining is soaked. I cannot see behind the plate and dont know it until the water finally made its way into the drip pan beneath the heater. When we saw the standing water, we turned off the electricity and shut off the water to it to stop a fire hazard. The warranty is up on my water heater, but my concern is that this could cause someones home to burn.

Bought dishwasher and a gas range about a year ago. Had to call the repairman twice on our dishwasher and three times on our gas range. Now it is little over a year and I am out of warranty. I paid extra and thought I was buying products of a good brand. I should have bought products from one of the cheaper brands along with the extended warranty.

I have tried to contact Whirlpool, email and telephone call. Finally someone called me but Customer Service was poor. I asked her to have a Manager call me, but she never did. They also never responded to my email. We Purchased our new Refrigerator 21 c.f. side by side 2 months ago. The ice maker is driving us crazy. It is very loud. There are white plugs on the 2 bottom corners that make the appliance look extremely cheap. I am not happy with this Refrigerator!

I am excited that I found this site, putting it in Favorites! Using the advice from ConsumerReports, we purchased a Whirlpool Gold French door refrigerator model GI 6SDRXXY02. We were looking forward to the energy efficiency reported. I blamed the kids and my husband when the water started appearing on the floor by the refrigerator. After a while, I started investigating and I saw the sheets of ice that had formed in the bottom of the freezer. Several times, I removed the ice, only for it to form and start leaking on the floor weeks later. We discovered the drain was frozen and that during the defrost mode, water would freeze in the bottom, and once the ice was too high, the water would flow over the ice onto the floor. My husband has unloaded the freezer and defrosted the drain with a hair dryer several times. So sick of this!! We never received a recall notice and of course, the warranty is out. I wish we hadnt paid so much for this refrigerator. It would have been out by the curb months ago. We are in the middle of a kitchen remodel and getting new cabinets. I will have to dispose of this expensive refrigerator. UGH, money down the drain!! We wont buy a Whirlpool!!!

I love my Whirlpool LP Gas Range. Cooks great and bakes wonderful stuff. Also has a drawer under to hold pots and pans. Self Cleaning Oven. I do a lot of baking and I cook three meals a day. The burners are easy to clean off on top. I try and wipe spills up in the oven as much as possible, It has everything on it that I love, except it could have a plug in which would really nice.

Its awful! We paid over $600 for our Whirlpool Gold Series convection/microwave clean release oven (model GMH 6185XVQ1). It worked fine for 12.5 months at which time it started clicking and, after a final zapping sound, would not heat anything at all. I called Customer Service, Oh, so sorry, its past its one year warranty. I was finally transferred to Escalations then to the supervisor of the Escalation specialist. Finally, we negotiated that I would pay for the service call ($129) and they would pay for parts (which were around $300 for a fried magnetron, diode, and something else). That repair was 6 months ago. Today while heating a glass of water in our microwave, I heard the familiar zap and no matter what, the microwave will not heat anything. I called Customer Service again, figuring the newer parts were still under warranty. Wrong. The newer parts were only covered for 90 days. This time, they tried to sell me a service plus package. For only $289, they will re-warranty my microwave for 1 year after they come out and fix it again (cost on me). My other option is to pay $129 again for another service call plus any parts (which Im sure will be about the same as last time. I will never buy Whirlpool again! Buyer beware!

In August of 2013 the lid on my Whirlpool Cabrio, model #WTW7800XW0 simply fell apart. This washer was purchased from Lowe’s in Live Oak, Florida on August 23, 2010. Lowe’s put me in contact with the authorized repair service, A&E Factory Service. The A&E technician arrived and told me the hinges were the cause of the lid breaking apart. He ordered a new lid and new hinges. When the lid and hinges were delivered the technician came back to my home and looked at the hinges again and said they didnt look that bad so he didnt bother even opening the box with the new hinges. He just put the new lid on and said I shouldnt have any further problem. The total cost of the new lid, hinges and service call amounted to $385.50. Well, here it is - not even a year later and the same problem is back with me. Yesterday (July 23, 2014) I was doing a load of laundry. When the load was complete and the lid lock turned off - the lid actually sprung upward and now the lid wont close. It seems that Whirlpool is fully aware they either have a design flaw of defective lids and they are gouging the customers for their errors. The Cabrio model is supposed to be top of the line - certainly not a cheap machine. I was, at least, happy with the performance of this machine cleaning my clothes properly but this lid problem is ridiculous. I do not plan to purchase any Whirlpool products in the future if they do not make things right by myself and hundreds of others with this same problem.

Bought the Cabrio washer in March 2011. Have had the same problems as everyone else. The machine is constantly off-kilter, does not wash well due to lack of water. Sounds like a freight train when spinning. Bulky clothes dont drain properly and have to be rinsed and drained a second time. After one year of ownership, the entire control panel had to be replaced. The next year, the same control panel had to be replaced again plus a water valve had to be replaced. Thank God I bought the extended warranty. The repairs would have cost me $1000, more than I paid for the washer in 2011. Total piece of junk. AVOID AT ALL COST!!!!

Off balance, wont wash correctly. Familiar stories online. Wasted money on a washer that is not very old. Wont buy another one ever again.

My glass stove top broke for the second time. The first time Whirlpool accused me of dropping something on it and chipping it. I didnt but paid the $400 glass replacement. Today while cooking, I put cold from the fridge not freezer, sausage into a warming fry pan. I heard the same pop I heard 2 years previously...sure enough the glass stove top broke. After a phone call to whirlpool, and hearing they were sorry but theres nothing they can do, I will write as many letters I can so others dont buy whirlpool.

I purchased two Whirlpool refrigerators 9 years ago and this year, 2018, both of them died. Bad compressors that cost up to $700 to replace. Repair folks would not guarantee them as there could also be other issues, like leaks in the internal parts of the refrigerator. I have a 20 year old frig (Kenmore) in my garage than runs great, no repairs and is in a non heated area. My conclusion is that that Whirpool reduced cost by making cheap products.

I bought a Whirlpool Duet Front Load Washer in 2008 and it began showing F71 and F70 error code in 2011. I paid approximately $1,000 for the machine. The washer wont finish the cycles and often wont start. When I press the power button, I hear the 3 beeps and after a while, shows the F71 error over and over. The information I gathered online indicates that many people have the same problem. The repair cost is at least $550 to replace the user interface circuit board and is no guarantee. This is ridiculous.How could GE sell consumers this kind of junk that fails to work only after 2 years. I had a top loader for 12 years with no problems, not a single repair call. My wife and I are extremely frustrated with piles of dirty clothes and no washer to clean them. I want GE to refund the cost of the washer on a 10-year prorated basis. This is only fair.

My oven had been temperamental since day one, then got worse over time. I do not use my oven that much so was not really worried or alarmed until a tray of cookies caught fire. It was set at 350 and jumped to 525 on its own. (I bought an oven thermometer to monitor) Minor burn taking tray out but all okay :-). Contacted Lowe’s where we bought it and they would do nothing (note: at this point the oven is 15-months old and out of warranty). Advised me to contact Whirlpool. Did that - they sent out a repair service and they determined it was the temp. sensor. It is now April 2014 and I am still waiting for the part (this all started Sept 2013). I have since talked and wrote to Whirlpool for this to be resolved and also asked that the range be recalled due to fire hazard at the least! When I spoke to them in December, they said they could give me ‘50% off the part’. Remember I am still waiting for that part, lol! After writing corp h/q, they said “Sorry, since we cant get the part why not have someone come in and take the old part out and have it rebuilt.” I ask you Whirlpool w/q would you be happy with that??? Will post any follow-ups... would love to hear from anyone else with this problem - model # GFE461LVS. Great day everyone. :-)

I purchased a Whirlpool Duet washer and dryer set in 2008. The washer control panel lasted 3 years. Because I did not have an extended warranty, Whirlpool would not do anything to accommodate me, despite the exorbitant cost of this machine. I told them that I would never buy another Whirlpool product. It is now 2017, and I have not purchased any other product made by Whirlpool. I want to make sure that a company manufacturing expensive machines designed to break within only a few years of normal use, goes out of business. Spread the Word to everyone you know about Whirlpools garbage machines. Maybe if enough consumers purchase products from other manufacturers, Whirlpool will get the message that they need to manufacture quality, long lasting machines. Try Speed Queen instead.

I purchased this Whirlpool washing machine model# WTW4950XW2 and after 10 months of use, it broke down. The repairman fixed it (gear box) and said that the motors and the control boards went bad. I didnt get a weeks use out of it because the motor went bad. He came and fixed the motor and it didnt work once after that. I called Whirlpool up and they sent their serviceman out twice and they didnt do much but reprogram it and both times it didnt do one full cycle. Now they (Whirlpool) are going to put a new control board in and hope it works. Whirlpool wants me to get another years warranty on the machine & charge me $100 and not do anything about all the money I spent going to the laundromat (2 months worth) while this machine was not working. There should be a recall on this machine for replacement & reimbursement of all the time and money lost.

Whirlpool washing machine #WTW58ESVW1 - I bought this thinking Whirlpool was a good brand name. I was totally wrong. My machine is two years old and the auto sensor switch has quit working 6 times. One time it only did 6 loads of laundry. Another it only worked for 6 weeks. That time I replaced the switch myself to save money on a repairman. Ironically the switch is still under warranty but they will not replace it unless a serviceman comes to confirm that the switch is dead again. This is because 2 have already been returned to them. Obviously, there is a problem with the switch. The company will do nothing. They used the excuse that I did not purchase an extended warranty. This is merely an excuse. Do not purchase any Whirlpool products. You will be wasting your money and time having to end up going to go out to do laundry.

We purchased a Whirlpool refrigerator in December 2017. Since July 19 we have had the same problem with the refrigerator three times. The technicians don’t know how to fix it and Whirlpool refuses to replace it. The customer service rep was ignorant on the phone and could care less about a problem. Even though there is a lemon law they refuse to replace the refrigerator. We have to defrost the refrigerator every 2 to 3 weeks so will cool down again. Whirlpool is the worst company we have ever dealt with customer service wise. Lowes will not do anything about it because it’s within the first year.

I purchased this washer (Whirlpool Cabrio Model #WTW8000DW) 10-25-17 from Best Buy & now it has no power to the panel at all. The power to the outlet is fine which I can plug a hair dryer in & the hair dryer works. Tried all the reset buttons & options with nothing on the panel working as well as unplugging. Still nothing. It is barely 4 months old & I am very dissatisfied for the amount of money I paid for a high efficiency top loading washer.

Purchased new Whirlpool 2-door, side by side refrigerator from Standards store in December 2010 for close to TT$10,000. For 2-3 years, it made a very loud noise. Each time it cut off that disturbed my peace and quiet. I complained, to no avail. In early 2015 or thereabouts I began experiencing severe warming problems in the non-freezer compartment and, since that time, I have suffered large losses from spoilage. The warming coincides with over-freezing (icicles, thick frost formation and whirling, dense cold air) in the freezer compartment and icing up of the vents in the non-freezer section. Moreover, the cool air flows from the top vent only when the freezer door is left open. Since that time Ive only been able to marginally cool the non-freezer section by unplugging for up to an entire day, at least once per week. I believe this is a manufacturing flaw rendering the non-freezer section not fit for its purpose although it manifested itself sometime after purchase. My prior experience with another brand has been totally different (13 years and still working). It is totally frustrating. It is also unsafe since spoilage is sometimes difficult to detect. Here, we have to deal with the seller and that is often a hopeless situation, particularly outside of the warranty, as has been my experience with another household appliance. Ive been advised by independent technicians who reportedly have encountered this problem that the solution lies in boring a hole connecting the two compartments which then enables efficient cooling of the non-freezer compartment. Quite frankly, I would like to have the refrigerator replaced despite the fact that it is outside of the warranty.

Within 5 years, this is my experience: A broken brand new Whirlpool fridge after 6 months of purchase; a broken oven that needed repair after 1 year, and today, the oven door just shattered in pieces after I heard a loud noise from the kitchen, almost injured the kids. And guess what, I just returned a new Tilt-Head Stand Mixer KitchenAid that wouldnt stay in place; the head keeps on tilting and would not stay locked. After being on hold on the phone for almost 3 weeks for a return, I found out it was a Whirlpool brand family. This is horrible, I would suggest to never buy the Whirlpool brand; their products are a real nightmare and their customer service is not reliable. If you do buy from them, expect unreliable products and very long long wait periods on the phone.

I purchased this washing machine December 16, 2011. I paid $737.07 for this machine. 14 months later I had to repair the top of it which cost me $255 for the lid which the plastic around the lid was cracked. I had to pay $136 installation fee and two years later the exact same thing happened again, the plastic cracked. I have contacted Whirlpool which took a complaint - said that was all they could do. Ive contacted the store where I purchased it, they can do nothing. I read online there are many complaints about the lid on this washing machine. It shouldve been a recall. I will never purchase a Whirlpool product again. I will not pay to have it repaired again. I will give it away and purchase something else not whirlpool and not from Lowes. I expected some kind of compensation from whirlpool on this. I have all my receipts.

My ref. stopped working. I troubleshoot it and did not work. I filled out a service request back on February 2nd, 2015. I got an email back from a subcontractor called Active Appliance INC. with a date service on February 6th, 2015, 4 days after my service request, and that is the only available date. The technician arrived while I am not at the house, however I talked to him before he started the work on my refrigerator and asked him kindly if he can call me after founding the issue, and he assured me that he will. No call and when I arrived home I found that he told the attendant that the refrigerator is not working and he has to report to the office. REALLY! We know that! Anyway I called Active Appliance and the customer services rep. told me that she could not answer with the diagnose until she speak with the technician and that will be Monday February 9th, I asked if I could speak with a manager, and her reply was Our managers do not talk to the customers. I had to hang up and call Whirlpool customer services and spoke with a nice gentleman, that he was not happy with Active Appliance INC. services. He placed me on hold and called them and within 3 minute he got back with the news, what was wrong with the refrigerator, electric computer panel burned out and then the fan continue to work with no stop, so it burned as well. He assured me that the services will be done no later than Tuesday February, 10th.While on the phone I got a call from active appliance and this time she wanted to know if I am warranted. I told her that I have Whirlpool on the other line and they assured me that I am. She said that it does not matter and she has to get something in writing. I placed her on hold and talked with Whirlpool and he assured me that he will contact them and email me a confirmation, which he did. By Tuesday February 10th, no call no follow up. I called Active appliance and they stated that it would take up to 14 working days for a part to arrive. I called Whirlpool and spoke with a customer services manager, and she got on the phone and told me that they are going to do their best and get back with me. Today February 16th I got a call to cancel a work service order due to technician calling sick and reschedule for February 25th Wednesday, I told her that they did not call to schedule the service first place, her answer was Never mind, I am calling to cancel anyway. Would you like to take this appointment or NOT? I asked her kindly to reevaluate their service procedures and the way they handle their customer, and I told her that I bought my refrigerator from Whirlpool and they are the company in charge of their product and I do not wish to continue this dialog with Active Appliance!I called Whirlpool and the customer service gentleman was helping me and we got disconnected, however when I called back they were closed for the day, however the customer service has my phone number but I got no phone call!!!! I think this is the worst POOR service I got within the last 20 years!!!!! I hope someone at Whirlpool care about their services and can contact me to handle the issue.

I have had my Maytag (Whirlpool) Centennial Commercial machine for 10 years and it has not required any repairs or have given me any issues. I love the water level sensor that doesnt require me to select a load size. I would highly recommend the Whirlpool brand to consumers.

We purchased a Whirlpool Cabrio washing machine on 3-18-16. In February of 2017 the washer died. I was bleaching my whites at the time so most of the clothes, whites fell apart because they sat in bleach and water for 2 days. I had to figure out how to get them out without getting bleach and water all over my clothes. I called whirlpool and they got someone to come fix it. The tech came and said we needed a new control panel. We waited 3 weeks for the panel. He came on 3-24-17. He put the part in. Took less than 10 min and said, All set. I went downstairs and put a few things in. I was a bit leery and the machine started. I went back upstairs and I hear beeping. I go back down and the machine is flashing again. I called the repair people they said, Unplug it for 10 min. It may reset itself. If it doesnt, call back. It didnt. I called back and wanted me to wait till the following week. I told her I had clothes in there.Someone came the next morning and said it needed a harness and they would order it. Well its the 28th and I havent heard anything. I have called whirlpool several times with no satisfaction. We had the machine less than a year and its been dead for 2 months. I am disabled. I have multiple sclerosis so every day is a new issue. I hate to put that in here but I want you to know what Im dealing with along with a dead washer. Any help you can offer would be appreciated.

On August 16, 2016 I received delivery of an Whirlpool under counter refrigerator that I ordered online from Home Depot. Model # WUR50X24EM. Five months later, on January 10, 2017, it stopped working, I called Whirlpool for repair. They referred me to their service company, I called the service company the same day. They had a repairman out on the following Tuesday, 1/17/17. The repairman said that he will need to contact Whirlpool to order a part. Whirlpool sent him the wrong part. After numerous phone calls no one from Whirlpool could figure out the correct part number. The repairman kept sending over pictures and information on the correct part, but this all went nowhere with Whirlpool.On 2/7/17, I called and started yelling. I had been very patient up to this point. I was finally offered by Whirlpool a parts research to determine exactly which part was needed. Plus a $50 Visa card to appease me. At this point, its been four weeks without a refrigerator and no one from Whirlpool has put any effort towards trying to figure out the correct part. On 2/16/17, I called Whirlpool again to find out if they had found the correct part. They told me that the new part had been sent to the service company and Whirlpool scheduled me an appointment right then for Monday, 2/20/17.So today is 2/20/17, the repairman came and went, Whirlpool once again failed, they lied because the repairman came out with the wrong part that was originally sent to him when he ordered the part back on 1/17/17. I called Whirlpool and asked for a manager. They connected me with the Resolution Specialist. I told her everything and pointed out that it has been six weeks without a refrigerator. She said she will take care of it and get the right part ordered. I asked her how long I should have to wait, cause at this point I have waited long enough. She said she will have an answer by the end of this week. I dont believe her, I feel as though Whirlpool is pacifying me. I dont understand why they cant order the correct part.I have no faith in Whirlpool that they will do the right thing or have any understanding on how inconvenienced they have made me. I have no faith to the point that I ordered another refrigerator from a different manufacturer. It will be here tomorrow between 8am-12pm. Oh, and Home Depot, they washed their hands of this a long time ago. And, I have yet to see the $50 Visa Card.

Its a great machine but the temperature control button is easily moved at times. The machine does a great job in washing clothes. Ive had mine for 10 years now and hope that I never have to replace it.

Ive had my Whirlpool refrigerator for 6 months and since then Ive had it serviced 7 TIMES! Im a person who works so every time my fridge breaks down I have to take time off from work to wait around on a tech. I just called Whirlpool to see if they can switch my fridge out and they said NO! All they can offer me is a $50 check and have a different company come out and check my fridge. Im SO UPSET AND DISAPPOINTED! I remember when I was a little girl my parents and grandparents would talk about how good Whirlpool was and I was so excited when I moved into my first brand new house 6 months ago. It had all brand new Whirlpool appliances but now I think they are a piece of crap because to top it all off my microwave broke down 3 months after I moved in and I waited over a month from the time I reported it to have the tech come out and replace it. I dont recommend ANYONE buy this brand!

Bought this new in Oct 2012. A week back stopped working. After a week found out it needs new compressor and will cost 1,096.00. Paid 2,100 for this new and now need to buy another fridge but not this make.

Cabrio Washer and dryer are about 3 years old. With washer a residue is left on clothes and require an extra rinse, sometimes 2. Also, clothes become unbalanced and I have to rearrange clothes, sometimes more than once. Washer doesnt go through rinse cycle on own, I have to manually make it rinse and spin. Both washer and dryer have rust on the tops and the writing is fading.

Very functional microwave which also comes in convection oven if needed. Stainless steel, finger print resistant, is very handy and easy to clean. Overall very happy with it so far. Much better than the earlier Samsung that we had.

Whirlpool top loading piece of junk! I would give it a zero star review if I could! Do not buy this machine!!! I agree with many other reviews. It doesn’t get the clothes cleaned and now a completely doesn’t work. We reset it, we’ve had the service guy come in and replace a bunch of parts on it. It’s past its one year warranty and doesn’t work anymore. Piece of junk! Junk, junk, junk!!! Waste of money. Do you not buy the Whirlpool tub loading washing machine!

The average life of a refrigerator is 11 years. We purchased a Whirlpool convertible refrigerator (Model EL7JWKLMS02, Serial # EWR1339731) on 6/12/04 from the Lowes here in Visalia, CA. The first delivered was DOA and Lowes delivered another. That should have been a warning sign. We have had several problems with the product, as early as 2006. All repairs went through Sierra Appliance & Franks Appliances.We are now in the market of another refrigerator to replace this one. We have had to have freon added now for the third time. Sierra Appliance was unable to find any leak, but each time, the freon was depleted. In addition to the health hazard of having freon leaking into the house, we have had the distinct displeasure of having to deal with food waste, etc. Because of the ongoing problems with this product, we are now facing the reality of purchasing another refrigerator to replace this Whirlpool product.Due to this, I feel it is difficult to consider another Whirlpool product and will question any product to ensure that it is not Whirlpool-related. If there is anything that Whirlpool or Lowes can do at this point, it would be appreciated. Thank you for reviewing this note of dissatisfaction. It appears that we will be shopping for a new refrigerator this weekend unless we hear from Whirlpool. In any event, I would like this recorded as a complaint from a former customer.

I just bought a house with a Whirlpool Accubake wall oven and after I did a self-clean, the oven quit working. It goes through the motions of working but neither element heats up. After replacing the elements ($95), I am going to replace the thermal fuse to see if that cures the problem. Whirlpools automated Customer Service phone service sucks. You cant talk to anyone about troubleshooting any problems so you spend money until you eliminate all possibilities.

We bought our Whirlpool Cabrio 7 years ago and it was great at first. I have not had any trouble with it ripping clothing. The clothes are clean. Its constantly breaking down. First it was the drain pump. Then the main computer board went! I called Whirlpool and of course the lady says its not covered. I had back up though. Google is amazing! I asked why this wasnt a recall as all over the web, people had this same problem. I pushed and pushed and she put me on hold. Came back to say it was in fact covered. What? Really? What changed your mind? She wasnt allowed to tell me. Supposedly had something to do with the date of manufacture. So okay, they send the repair guy out, its fixed. Now tonight, the lid locks and nothing happens! This repair was about 6 months ago. Grrrrr. Its been one thing after another with this hunk of expensive junk. When I buy an appliance I expect it to be problem free for far longer than this. I am not getting a code or anything, just dead air. So frustrating with three kids not being able to do laundry when I need it randomly :( Has anyone else had this problem? The lid locks, then does nothing. I unplugged it, pressed off and restarted it. Changed settings. Nothing is working.

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

Ive had my Whirlpool Refrigerator for 2 years. Within that 2 year period, all 3 of the drawers within the refrigerator have broken and now there is a crack in the freezer on the bottom starting in the front and going straight back on the bottom to the back and up the back. After pleading my case for a new fridge to their Customer Satisfaction Department and everyones supervisor therein, theyve offered to pay for the epoxy repair. Im very dissatisfied with this! I dont think that a $1300 fridge should be held together by glue after only 2 years. Ive been waiting for one of the drawers to be replaced for over 2 months. They claim that the crisper pan is out-of-stock and they have no information if it is in production. Im to call back in 2 weeks to find out the status of that part. I would like to add that my husband and I work 6 days a week and our adult children are rarely here, so this refrigerator is very lightly used. We dont have a household of 6 or 7 people constantly home, opening the doors and sliding out the drawers. The fridge that I had previously was a GE and it lasted 30 years. I guess the next one will probably be a GE. I just wanted something different. Well I got it. Its something broken.

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.

Aug 2012 bought washer, dryer, stove microwave/hood, dishwasher, fridge. $5000 later I had a service call on washer. Clothes stuck in washer for over 3 days to get fixed. Oven igniter has went out for the third time, 1 broke knob on stove. Dishwasher leaves dishes wet after cycle. Fridge handle fell off, crisper drawer rail broke off, and a door shelf is cracked. I am a veteran and unemployed. What happens when warranty expires and all my CRAP whirlpool breaks a week later? Also was told warranty doesnt cover the crisper drawer. They didnt tell me that when I purchased at Spencers on 75th ave and Bell road. Salesman at Spencers, Dan ** told us everything is covered. Im not a happy customer or VETERAN!

I bought a Whirlpool fridge in June of 2014 and the plastic part of the stainless steel handle that attaches it to the fridge broke about a month or so later. After replacing the fridge because the company said they no longer made the part they gave me a new fridge and with that one the door would not close without leaving a gap of about 1/3rd of an inch open at the hinge side. They took that fridge back and sent me a new fridge. A week later I got in the mail a handle for the first fridge which I no longer had. About a week after that I noticed that the latest and third fridges handle had a crack in the same place. Whirlpool sent me 5 replacement parts and they were all defective with the same crack visible in the replacements. Finally I got a replacement handle that looked good and it broke today, Feb 6th 2016, in the same place as the first one. I should mention that each time the company replaced the fridge it was with a different and better model and each with a slightly different handle. There are other design flaws with the fridge. The door is in a corner and there are cabinets on the wall so the door can only open slightly more than 90 degrees which makes it impossible to open the crisper drawer enough to get a cabbage in it and if I want to clean the crisper drawer I must move and turn the fridge in the kitchen. Also if the crisper drawer is not closed completely it causes the guard rail on the bottom door shelf to fly off sending everything on the bottom shelf to fall to the floor. Fun when some are made of glass and filled with liquid. You would think I would have learned my lesson about this company but no! I went to Lowes and bought a Whirlpool dishwasher and when I saw that the automatic door would not open enough to dispense the soap, powder or packet I called a certified Whirlpool repairman who told me after receiving a duplicate that of course would not work either, that there was no solution to the problem and I went back to Lowes and bought a Samsung and my problems were solved. I WILL NEVER BUY ANOTHER Whirlpool or as I now call it, Whirledpoo, product, EVER.

We have a Whirlpool Refrigerator, Model # ED5HHEXTQ00. And every shelf has cracked, the water and ice dispensing levers have broken off. Now our produce trays are broken as well. I do not recommend Whirlpool products to anyone. They will not stand behind their product! There is obviously a problem with the plastic used on the shelves and trays. I have read of others complaining of the same issues!Whirlpool! You need to step up to the plate and recall these shelves, and replace them for your customers!

We purchased a new home April 2013. All our appliances were new Whirlpool stainless. Looked nice. After almost a year our microwave started acting improperly. Beeping, changing screens, not working when buttons pushed. Then the micro wave had a melt down and caused the glass try to break, parts to melt and caught fire internally melting plastic. Notified Whirlpool and they sent out individuals to repair. After several weeks the repair was completed and we were advised that they did not understand why this would or could happen. We should be fine now. Well we are now again having this unit beeping, changing screens, not working when tried, and when entering numbers, number and time are not what was trying to be entered. This unit my wife says is possessed and she wont use it. She fears it will burn the house down. It is Velos model TR 2 24 11000 serial number. It now beeps and changes with door open as I read the serial number.

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

Bought a Whirlpool Cabrio. Noticed it was getting really loud less than a year into owning it. Called while it was under warranty. The tech said it was fine. Within the next year and a half it got so loud, you cant hear anything else in the house while it is running. Now it is leaking from the tub seals and the bearings are going out according to two service techs I have had come look at it. They say it is more expensive to fix than the washer is even worth. This is due to the parts that would be used to fix it are the same cheap Whirlpool parts that were put in it in the first place. They both said that these are not good washers and commonly go out about a year and half to three years old. Shame on Whirlpool for making such a low quality product and not being willing to do anything about it.

BUYER BEWARE!!!! Dishwasher less than 2 years old and pump & motor assembly went out. You would think and hope that an appliance would last longer than that... Contacted Whirlpool and they were not helpful at all. Will not be buying anything made by Whirlpool again...

Not real expensive but cleans almost perfect. Were happy. MUCH better than the beautiful and pricy Samsung. We returned it for this. Paid less than Samsung but always purchase extra warranty. So far so good. Pretty quiet. Nothing to complain about except be very careful how its loaded to get the best cleaning. Heat dries dishes really good. Looks great but not better than others.

In 2013, my husband purchased a Whirlpool Hot Water Heater model #E2F40RD045V 40 gal. from Lowes in Vancouver, WA. On 12/12/15, had to call a plumber, the hot water heater was intermittent hot/cold. He flushed it, checked all power connections and changed the elements. On 3/18/16, NO hot water. Having a 6 year warranty, I called Whirlpool. They gave all kinds of excuses and told me to try a bunch of tests. By the time I got back to call them they were closed. I called them again on Monday 3/21/16 and said nothing worked and it had popped the breaker. They said change the elements. I told them I had just changed the elements 3 months before. I told them it was faulty wiring. They said the top element must be faulty. I gave up at that point and called the plumber. He came right out the next day. I had purchased a Rheem hot water heater to install and asked him to check the Whirlpool hot water heater elements he installed before he removed it. That is when it was discovered that under the insulation around the bottom element it was all scorched from FAULTY wiring. I called Whirlpool again and told them I could send them a picture and they said dont bother and immediately gave me an RA to return the hot water heater to Lowes. I told them I had already purchased another hot water heater and it was not a Whirlpool. I am going to request a refund.

I bought a Maytag front load washer on October 24, 2010. I have not been able to use it because it came damaged by the manufacturers. I contacted them by phone several times and it took them three months to send someone (A and E sears repair). Two months passed and I did not get the parts necessary or a replacement washer. I kept calling and finally they sent someone again in May 2011. They said they where going to order the parts because the new company was not going to replace the machine, even though it was already damaged. They said I would get the parts between three-five business days. I only got one part. A and E sent a repair guy again on the 22nd of June. This one said they needed the entire machine in parts and that he would order the parts. I called A and E one week later and they said they were waiting for the on manufacturer to send the parts (Whirlpool). The 26th and the 27th of July, I got the parts. On the 22nd of July, another repairman came and said we needed more parts. Today, August 16, 2011, I called Whirlpool and A and E and now they said the parts wont be here till after October 26, which by then I would have to pay for the parts and labor if I wanted it fixed because by then the one-year warranty would have expired. So here I am with a $700 washer, which was never used and they refused to fix/replace. They sold me a lemon!

Bought a Whirlpool Cabrio HE washer over a year ago. Recently, the spin and drain cycle stopped working. Went to find a repair person only to learn that many dont work on this model because of all of its problems. Did find a company who replaced a part ($100). Now sounds like a thrashing machine when it spins. However, now the machine wont even go through a regular cycle. Dont buy this brand!

Every one of the knobs cracked where they engage the gas valve. One gas valve came loose from the manifold creating a gas leak discovered by the propane company on a system leak test. Screws came loose that hold the tracks to the base for the slide out bottom drawer. The AquaLift cleaning system is useless. Better buy some oven cleaner and rubber gloves. Very disappointed! One star because 0 isn’t an option.

In August 2012 I purchased a side-by-side fridge with indoor water/ice dispenser. The appliance was purchased from Sears and delivered and installed by their employees or contractors. In November 2014 the refrigerator abruptly stopped making ice and began continuously cycling through the ice making process without creating ice cubes. Repairman told me the ice maker needs to be replaced for $300. He stated the control board went bad and the only recourse is an out of pocket replacement of the entire ice maker. A two year old fridge. The fridge has never been moved, abused, misused or dirty. It has only been used in a two adult home under normal household conditions. I would have thought an item that cost $1000 would last longer than two years!

The drip hose had to be replaced 6 months after I purchased the refrigerator. At that time the warranty covered the part but the technician told me that Whirlpool was aware of the problem. About 5 months after the warranty expired, the same problem again - ice built up on bottom of freezer and water leaking out from the left side leaving a puddle on the floor. I called Whirlpool and they said warranty is expired. I tried to tell them about the defective part but to no avail. Had to pay to have drip hose replaced again. One year after that the main CPU board went and had to be replaced ($350.00). I sent the part back to Whirlpool, registered mail, hoping they would respond with a yes, this was defective. Their response back to me was, “warranty is over.” For a main board to fail in a $1500.00 refrigerator in less than 3 years was uncalled for. Two days ago I noticed the puddle on the floor and had to call in a technician and ONCE again the drip hose had to be replaced ($160.0). He told me Whirlpool is well aware of the problem and there is a Service Pointer out on it and the code is S38211. Thanks for nothing Whirlpool. The refrigerator was a lemon and you did nothing about it. I wish I would have read these reviews first. No more Whirlpool products for me! PS. I was a dedicated fan of Whirlpool for 40 years!

This refrigerator was already part of the appliance package that came with the property. I dont think if I had a choice, I would choose this brand. The stainless steel finish has rust spots, the top shelf has cracked and it is less that 5 years old.

Purchased washer 8/2015. Washer quit working 12/2015. Would not drain or do anything. Repairman dispatched and came 3 business days later. (They dont work weekends.) Repairman looked at old receptacle cover and immediately stated, Problem with polarity of plug. No prior problems with plug running appliances. Plugged into it for over 8 years. When I advised him of that then he started troubleshooting circuit board. He cleaned out the machine and got it to work. (Still under warranty) 4 days from repair, and machine quits. Same problem. Wont drain and wont do anything. Call for service again on Weds. morning and given following Tues for service call. Online consumer reports complaints #ered at over 1,7000. Same machine, same problems. Call Whirlpool directly, given runaround. Talk to Whirlpool mgr. (Robert) complaint # **. He states, Have to wait for service. But calls Brandt Melb., FL to try to get sooner service. Brandt calls me stating they have ordered a lid lock and CCU board for machine and will be out Monday. How would they know to order these parts if it is not a constant issue? Im thinking class action suit for shoddy product... LOWES Indian Harbour Beach, FL. Transaction #**.

Washing Machine Model WTW4616FW - I purchased this machine at Home Depot after I had to return my Samsung Costco machine that was recalled due to the glass top flying off. I was attracted to it by its simplicity in design and price. I have had it almost a full year and love it. I like that it has the deep water wash for over-sized items and a full-sized agitator. I was shocked that it was actually Made in America. I highly recommend it and I hope they keep making this reliable machine that gets the clothes clean. Awesome machine without the bells and whistles that I dont expect to breakdown. Way to go Whirlpool!

I have fought with this issue hundreds of times over the last 3 years. My old water heater work fine until it started leaking, I bought a Whirlpool 40 gal gas hot water heater from Lowes. Worked fine for the first month, then this pilot light issue started popping up intermittently. Now the damn thing doesnt want to light at all. I WOULD NEVER BUY ANOTHER WHIRLPOOL PRODUCT THE REST OF MY LIFE, and I will tell everyone I know that WHIRLPOOL Products are not quality products. DO NOT BUY. There have been so many class action lawsuits about this product and Whirlpool keeps on selling this junk. Im so frustrated with WHIRLPOOL customer support I cant think straight. To reduce your headaches in life, do not buy Whirlpool products as they are junk and their customer support is terrible also.

We bought a dishwasher, stove and refrigerator last month. Dishwasher and stove work great, however the refrigerator is junk! The freezer part works great, but the refrigerator doesnt cool at all. The first time he was here the repair man said the seal on the door was bad and he glued it. He told us to not open the door for 48 hours then everything would be fine. IT WASNT. A week and a half later he came back. He looked inside, scratched his head and told us, “This model should have the “deluxe” fan and I dont think it does!” Said he would be back in 6 days with the fan and well “see if that fixes it”.I called Whirlpool service waited on hold for an hour before getting cut off. Called back waited 35 more minutes but actually got to speak to someone. The big solution... They offered me a 6 month extended warranty!!! Ive lost an entire refrigerator full of food. Missed two days of work and am going to miss another when he brings the “deluxe” fan. Also been eating out all month and probably spent $100 buying ice. IE... MOST EXPENSIVE REFRIGERATOR EVER!!!

I purchased a Whirlpool dishwasher on March 13, 2007, along with a 3-year extended warranty. Well on Nov. 15, 2011, I had a part in the control panel go out, so they replaced it and they charged me $129.00 for labor and $29.18 for the part. My dishwasher is doing the same thing. It doesnt finish the cycle and I have to restart it, so I called the repairman A&E. They said the part is only guaranteed for 90 days. The part only lasted six months! Its the same part and the same problem. It should be considered a defective part. No matter how many you have replaced the part, it is going to need to be replaced and at $160.00, I cant afford it. They should have to pay for defective parts. Also on this model GU2600XTPSI on the panel buttons, the start button was made with this puffy plastic that has pulled apart and now it looks terrible! None of the other buttons were made this way. What a crappy workmanship, they should be embarrassed. This dishwasher was not cheap; it cost $650.00 plus $50.00 for the warranty. 4 years is too short of a time to have to replace any home appliance. There are appliance out there that are three times as old as mine and they are still working. I guess in the last 10 to 15 years, big companies dont care about their products or the people who buy them, just about their profits! I will never buy or recommend Whirlpool products.

In the first year of my Whirlpool Washing Machine, the motor quit working entirely. Fortunately, the machine was under a 1-year warranty and the motor was replaced by a Whirlpool service technician. My big complaint with this washing machine is this: Even though you select hot water for the wash cycle, the machine has sensors in it that only allow the water to get lukewarm. If it senses the water getting too hot, it adds cold water to bring the wash temperature back down to 78 degrees F. Next time I will do my research and buy a machine that actually allows one to use hot water.

Ive never considered writing a complaint before, but feel it is necessary in this situation. I have had my Whirlpool refrigerator since November, 2007. It has worked great until this past April when the freezer began to overfreeze, cause frost and ice to build up. I have had Whirlpool Factory Service out to repair the unit twice a month since April with still no resolution and the appointments are getting harder and harder to get someone to come out in a timely fashion. I called on September 1st and the closet appointment is September 15th. They werent even able to book the appointment when I called. I was told someone would call back within 3/4 days. When I didnt hear back today, I called to find out an appointment was set.Ive called the Resolution Team to obtain back records of service but havent been successful in receiving a phone call or email. I havent received all of the follow up emails after service which is frustrating since there have been two technicians that have come out for repair and were not provided any history on the unit. If I had the follow up emails, I would be able to share that information with them.I contacted Customer Service to find out what I can do in regards to the issue I am having and was told its best to stay with the service provider that I began with since they are familiar with the issue. I would imagine if they are familiar with the issue that it should have been fixed by now. Ive also sent a response card back to Whirlpool Home Appliances at the Survey Response Center and havent heard anything from them either. When I called to follow up there wasnt anyone that could point me in the right direction to obtain answers. They were able to provide me with the mailing address for Consumer Affairs though. Ive been told numerous times that if it gets to a point it costs too much to fix they will replace the unit. Im not sure when that decision is made. I have an extended contract and will extend it again in October when it expires. I just want the unit fixed or replaced. Its been since April with the same issue. Very disappointed consumer.

As many others have posted - the Cabrio washer is awful. Cycle time > 1 hr. Clothes not clean and caked in soap even with extra rinse. Phone Whirlpool and found they dont care. All theyd say is its government regulation fault but for $100 they could send a technician to ensure it is working as designed. To environmental reasons for the new design, seems to me it missed the mark. Longer cycles, extra washes, extra rinses... All I can say is - Unbelievable!!!

I had a full set of kitchen appliances delivered to me on December 11. The delivery crew installed everything but the microwave because we needed to have wiring done. Three days later an electrician came and upon opening the microwave box it was severely damaged. Whirlpool won’t replace it because I called one day outside their 48 hour window. They delivered me a damaged product – period. It should be replaced without question. Instead they want to send a “cosmetic tech” out to see if it can be fixed. I can’t imagine that’s a more cost-effective method for them. Completely unacceptable. I will never buy Whirlpool again based on their lack of customer service and common sense.

Refrigerator caught fire - I own a 2003 Whirlpool Gold side-by-side refrigerator that I bought new from Lowes in 2003. On Friday, July 13, 2012, I woke up to the smell of burning wires. I called 911 and they sent out a fire engine. While waiting for the firemen to arrive, my neighbor came to help me determine where the smell was coming from. Within seconds, we heard loud clicks and a huge cloud of gray smoke came out from behind the refrigerator. The firemen arrived, entered the house, unplugged the refrigerator and told me that the smoke and smell was coming from behind the fridge.

The beat goes on. My Cabrio washer is still down. After working for a mere 14 months, the control board died, and the machine would not spin out water. The repairman ordered a new one. Though the part arrived several days earlier than predicted, the repair service said they could not send anyone out, until our scheduled appointment. At last, today, the repairman arrived. I am ready to start whittling down the mountains of laundry we have stuffed in every closet. Some areas of my house are starting to smell like a locker room. It is not convenient for us to haul everything to a laundromat, or impose on a relative who lives nearby.The repairman was in the laundry room for at least 45 minutes, and then very apologetically tells us that the part is bad. It will not work at all. He has ordered a new one, and requested rush service, which I think they will ignore. I cant help but think these parts are manufactured somewhere outside the USA. Well, listen to this Whirlpool, I would rather pay $25 more for this part, and have your washing machine work. Dirty laundry might seem unimportant to you. It is not unimportant to us! If you cant do better than this, make something else. I am furious, and will spread this news to everyone I know, and I will report on this situation again.

Whirlpool Gold Series Dishwasher - I wish I had discovered this website BEFORE I bought this piece of trash last year to replace our antique Maytag that ran like a champ for 10 years. But after 10 year the gaskets wore out and it started leaking. Even at ten years old that Maytag cleaned and dried better than this brand new Whirlpool. My complaints are the same as everybody else here. Doesnt clean even slightly soiled dishes and then it doesnt dry any of the silverware, or plastic pieces like measuring cups and tupperware. All are totally wet and need to be hand dried. So, why am I cleaning the dishes beforehand and drying them after??? The only good thing I can say about this unit, is that it is quiet. But, as my husband said, so is a brick, and a brick would be just about as good at washing and drying our dishes. Buyers Beware!!! This is a terrible product. Turned me against Whirlpool appliances forever.

Have had mine for 21 years. Okay, the soap dispenser door would not stay shut after about 19 years. No real problem, just placed the dishwasher tablet on the bottom of a mug on top shelf. Now the timer sticks and has to be rotated manually. I think after 21 years, it is time to replace it with another Whirlpool. This one owes me nothing for 21 years service.

The washer itself doesnt get the clothes clean. The clothes on top never get clean, they smell. It doesnt spin out the clothes evenly even though I put them in evenly. There is oil on my floor under the washer and Rent-A-Center doesnt care and its under their Benefits plus program. They were to send off both washer and dryer last time and had no paperwork where washer was sent off at all. It has ruined a lot of my clothes with spots and I used the Tide pods. Stopped using them cause they were not working. I will never buy another Whirlpool product or appliance. Water pump went out in one year... Why would you not care about your customers... I got this set in 2013 and its the Platinum line triple top loader. You lucky to do one load at a time, a single load that is...

I have recently installed a Whirlpool water heater and was thankfully home when I heard a pop sound and my water heater had exploded inside. The heating element also caught fire. I called customer service and was not satisfied with the response from their customer service team.

Freezer side went out on model# ed5kvexvl00. Fridge is less than 2 yr old. Didnt expect anything to go wrong so quick. The extended warranty, I did not purchase. Replaced relay switch - no changes in problem... Contact them (Whirlpool) and like every else, got nowhere with them. 3 weeks and no fridge... Hopefully the compressor is not bad. Will find out soon. I will be researching before I select new appliances in the future. They need to be ashamed of themselves.

I purchase this machine over 15 years ago. It’s still working, washes the clothes. The only problem the section where the bleach is poured is completely rusted out. The machine has definitely lasted beyond the 15-year cycle. I intend to purchase a new one. I probably would buy the same brand.

From day one I was not happy with the new auto fill washer, I was told I just needed to get used to it! Well I have tried every cycle available and no matter what I try cloths don’t come out clean, using the deepwash cycle Sheets on top were still dry once cycle was completed!! Give me back my old washer! Washed much much better.

I have had my washer dryer set for only 3 years and have all the problems that have already been posted. Whirlpool has no recall on this washer (Cabrio) and does not plan on helping out anybody in any way. Their solution is pay for everything out of pocket or buy their one year warranty for ironically the price of what a new motor, and any of the other common items that are breaking would cost. And this is only good for ONE year. With the history of this company I would expect this to last at least ten years or longer before we start discussing replacing anything. I also had a Maytag that I had a problem with and did not get anywhere with that either. Whirlpool/Maytag, you need to stand behind your product. Your name is not going to get you anywhere nowadays. This blog has a spot about legal representation. If you can help me, please contact me.

We purchased a Whirlpool washer model WTW7500 in November of 2017. I found the clothes were not getting clean and also noticed that even after a full wash some parts of the clothing or sheets had dry spots! I checked all connections and called for service. As soon as the serviceman saw the machine he said, “yes, that’s a problem with those machines”. They are low water/water saving as per some American regulation and that’s what happens... you’re going to have to live with it. He also suggested running an extra rinse and using “deep water” function. I did this and it made very little difference except now a wash cycle for bedding is 104 minutes! Also, still had a big dry spot on my sheets!When I called again to Whirlpool they scheduled another repairman for a second opinion, turned out to be the same person with the same answers... I called Whirlpool again and was informed that my washing machine is working as designed! I argued that a washing machine is designed to wash and clean clothes so this one does not do what it is designed for... I spoke to the supervisor, she was actually just rude, also said I not had 30 days to make a complaint and I was outside of that, when I asked to speak to her supervisor she said there was no one above her although she denied being the owner of Whirlpool! (That’s my little joke). Anyway wish someone had warned me prior to this purchase.

Quiet Partner II - Our dishwasher racks started to crack and rust very quickly, about two years after purchase. We repaired the racks and tines, but the rust got worse. We replaced our dishwasher today with another brand. Many of the tines on the drying rack had rusted and broken off. We have been told to only purchase Nylon racks. I hope this is good advice. I must admit I had no trouble with the machine as far as cleaning my dishes. I just felt the racks should last longer than two years. Cost to replace racks was about the same as replacing the whole machine.

I bought a Whirlpool 5-burner gas range with double oven at a cost of $1700. Almost immediately, the finish above the oven started cracking and now is starting to chip off. When I contacted them, they stated cosmetics were only good for 30 days. We had just moved and were getting settled so we didnt use the range much for the first 30 days. I am very unhappy with this product and also unhappy with Sears for their lack of effort.

I purchased this stove online and have been very happy with the features. I am able to use alternate settings based on the size of the Pan/pot. Cook timer, light, variable rack displays, etc. The only negative feedback is the need to add 5-10 minutes more to the temperature, based on the recommended cooking time of your recipe.

I bought fridge model WRS571CIDm02. The worse company in the world. Since I bought this fridge have a consistent problem with the evaporator fan. It makes noise. Geek Squad came 3 time in 3 years to replace the same part. Now the 4th time I ran out of warranty and Whirlpool dont care. On top of that the stainless steel is rusting. It is not stainless steel. It is a nightmare. Avoid at all cost. If there is zero I would give it to them.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

We wanted the ease of use and longevity of a top loader WITHOUT a full touch screen. Whirlpool has such units in a choice of price levels to accommodate most everybody. The agitator free design and automatic water level feature is amazing. Clothes are nice and clean and uses about the same amount of water as flushing a toilet.

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

Last December our refrigerator began to freeze food - gallons of milk, bowls of food, and produce. I called Whirlpool: Of course the warranty had expired. It was suggested we turn the unit off back on to reset the computer. We did this for 2 or 3 months and eventually it worked properly. We were gone for 12 days, now the icemaker has stopped and all food is frozen. I called - they will send a tech for a minimum of $95. Read how many trips are usually made before a problem is solved. Cheaper and more logical to buy another unit from anyone but Whirlpool.