Avoid Whirlpool at all cost. I have had the GSS series, which was horrible. It was declared unfixable by service after 2 weeks of ownership. It was replaced with a similar WP model WS series and was told it was basically identical to the GSS series except for some cosmetic differences (They do look identical and yes, it’s just as horrible as the GSS.). The first one was defective from day 1. It was replaced and assured the next one would be thoroughly checked out prior to delivery. Obviously, nobody did this (was still in box and never opened). The fridge arrived and had the same exact defects as the previous units. Service literally said these were junk and they had nothing but issues with them that they simply cannot fix, and issues Whirlpool is obviously aware of but will not admit to, nor back up their products. Service literally told me to avoid WP at all cost or I will have nothing but non-stop issues and non-stop service calls and the fridge will still not be fixed. I purchased the extended 5 year warranty that clearly states that the fridge will be fixed or replaced if deemed non-repairable. Mine was! Yet, neither Whirlpool nor the retailer will do anything. I was literally told Take it to the dump and go buy a new fridge by both Whirlpool and the retailer. My purchase was less than a year ago. The 3rd fridge has only been here 3 months. They took my $1,500. They took my money for the extended warranty. It has been declared non-repairable, yet Whirlpool’s and the retailer’s response is Too bad, we are keeping your money, not honoring the warranty. We don’t care if it’s non-repairable. Take it to the dump and buy a new one.This is new! The money it cost, the money for extended warranty, the money for lost food, the money for lost wages due to having to be here for repeated service calls, the huge amount of time spent using hair dryers and everything else under the sun (this fridge must be baby sat and monitored pretty much 24/7 due to more issues than I can list). The fact this fridge has taken over my life, with freezer and fridge unusable (totally unusable, it has taken over my life, but I still can’t use it and spend a fortune getting take-out food) is just shocking, but more shocking is the fact neither WP or the retailer (the blue one that starts with an L, ends with an S and competes with HD the orange store) will stand behind the product or the warranty and instead is telling me to flush multi thousands of dollars down the drain and take my new, with extended warranty, to the dump and buy a new one. Calls to both companies only led to more wasted time and frustration.I don’t even see how this can be legal. They happily took my money. They fully explained how I needed the extended warranty in case something like this happens and assured me the extended warranty would protect me in case something goes wrong for 5 full years. They will replace it with a new one if un-repairable. Yet in less than a year, Ive gotten 3 defective ones with the last one only 3 months old with the first service call made on the day after delivery, but I’m supposed to throw all this money down the drain, take my new fully warranted fridge to the dump and buy a new one?!Shocking and not something I can afford to do. If I could afford it, I would get this thing out of my house in a heartbeat and buy something else, but I’m not made of money so this is not an option. Not sure what I can do other than to warn others to avoid Whirlpool and avoid the retailer (L---s). I’m just in shock and to say I’m upset would not even come close to describing my utter disappointment and frustration with both companies and this whole ordeal (never ending nightmare is more appropriate).

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

We purchased a Cabrio model WTW6600SB2 washer, it has lasted 4 years, then when the pump went out, we paid $200. To fix it then on the 2nd load, it went out, now the tech man says the motor is cracked and Im not sure if the motor is replaced, it will even work. I looked at the motor and it is made of plastic! Can you believe this? Plastic! I didnt believe it until I saw it with my own eyes. I will never purchase a Whirlpool appliance again nor will any of my relatives or friends if they ever ask my opinion.

I bought new townhome on 2018, in 6 months the top drawer broken, because stuck, after one year passed from the one year warranty start freezing all my groceries, milk, fruits. I turned off many times, not fixed. I am surprised paying so much money for appliances and turned out so cheap products and last only one year!? Older fridge last 10-15 years!! Companies ripping off people pockets. Very unhappy about this. Now services technician coming we have to pay for ....

Purchased the Cabrio top loading washer and dryer. Huge mistake. The clothes come out of the washer a tangled wrinkle mess. Have tried different cycles and water levels to no avail. Dark clothes have detergent streaks and lint. The dryer has a steam refresh cycle which Ive used to try and remove some of the wrinkles caused to no avail. Clothes come out with water spots. Ive only owned this dual for about 6 months. Take my advice and DO NOT PURCHASE!!!

This machine needs to go back to the engineering dept. There are too many engineering defects to mention. My Cabrio washer and dryer was delivered October 11th of 2017. It is just my husband and myself so laundry was scarce. I have been unhappy with the washer since the beginning and just recently decided to try and solve the problem. I contacted Whirlpool first and was told these machines have great reviews and nothing is wrong with them. When I started describing the flaws, there was one excuse after another and the person from Whirlpool blew me off. The flaws... all begin with not cleaning which is caused by design. The water level, even with the deep water setting, does not even cover the amount of clothes in a small load; the agitator is so small, there is no effect on agitating the clothes; even with using a SMALL amount of HD detergent, there is always soap residue on the clothes because of the lack of water; and last issue but not final is the load going off balance. The machine will walk all over and error codes according to the repairman need to be cleared so must call if it happened again. Well, the very next load it went off balance again. I did not call because I would have the repairman living with us and I am not willing to set up a bedroom for him or feed him. So, Whirlpool does not care if their product needs redesigning, they only care about selling their product and then the consumer is on their own. Basically the same train of thought from Best Buy where we purchased the machines. Best Buy would be happy to sell me another laundry set... per the store manager but that is all he could do. Will I purchase from Best Buy again... I think you know the answer to that. If they cannot stand behind a product they sell, then they can keep everything they sell, no more money coming from my checkbook to them ever again. Someone, whether the manufacturer or the retailer, should be willing to stand behind their product. But, no one cares. Bottomline, do not believe the ratings on the Cabrio washer. This machine has design flaws that cannot be corrected.

My washing machine ruined clothes with tiny rips. Small rubber pieces appeared in clothes. This happened during warranty but Whirlpool would do nothing. Finally, the bellow completely broke apart after 13 months. Repairman could not determine problem until this time. Whirlpool would do nothing.

We purchased a new Whirlpool washer in March 2010. Yesterday, 2/19/12, the washer stopped working. We called a repairman who checked the machine and told us the motor needs to be replaced. We called Whirlpool today, 2/20/12, and were told by their customer service department that since we did not have an extended warranty. We told them that we believe the motor should last more than 2 years. Their response was that if the motor lasted more than a year that was all they cared about. The only thing they would do is replace the motor if we gave them $299.00. I think it is very clear that Whirlpool knows it makes inferior products as they fail to stand behind what they make. I will never buy another Whirlpool product and would advise anyone who is looking for a washer to buy something other than Whirlpool.

Bought the Cabrio washer dryer set back on 1-12-13 for my new home and thought it was a good purchase. Well now its March on 2017 and the washer has been slowly getting louder during spin cycle to the point where yup you guessed it the bearing is bad because on a cheap seal that suppose to keep water out. It just cost me just under $600 to get the repair done and from reading other reviews and the fact that I have worked on cars and machines at my employment this will happen again. I wanted to save money on water for the city that I live in charges gold prices per cubic units of water but for the price of repairs to the water saved I am in the red. So once it goes again going back to conventional unit and will never buy anything from this company again. I work in the second largest printing company in the world for 28 years on press and know a bit about quality workmanship. Its really sort of typical on how over the years some good manufacturers cut quality and design in planned obsolescence into their product just to make money for the useless corporate bloat that has taken over. I made the mistake in buying what I thought was a good product from a great company but they just proved me wrong. People do not buy any products from this manufacture and find out what other unit they make and steer away from them too.

We bought a Whirlpool cook stove with a black top in 2009 and this year, in 2011, while cooking a pot of stew, the stove top burner began to make loud popping sounds. When I went to check it out, there was smoke coming out from under the pan and pieces of glass that had exploded out in small chunks. When calling the customer service line at Whirlpool, they told us that it was no longer under warranty and could not be of help. Their only explanation was that they would only cover a new stove top if it had cracked or broken this way when putting a cold pot on a hot burner. They said their technician could tell if this was why the shards of glass were exploded from the burner.

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

When you purchase a Cabrio high efficiency washer dont expect clean clothes! But, you can expect holes, torn and, smelly clothes. It takes a ridiculous amount of time to wash. The machine I purchased has a glass top but its dark and you cant see into the machine so that was a waste of money! If you wash clothes in 1/4 depth of water, nothing gets clean. Who even designed this disaster? I had enough common sense to know it was going to be bad but the salesman at Lowes informed me that ALL washers were high-efficiency and getting a tub full of water days are over. I wish we wouldve just paid for repair and kept my old washer. I hate doing laundry with this machine! I use to be able to wash my blankets, pillows, curtains, throw rugs, even car mats with no problems. Not anymore! This machine couldnt handle it. You ought to see my sheets and shirts when theyre done. They come out twisted up so tight I have to untangle them before they go to dryer. What a horrible nightmare of a machine! If we were not out so much money Id send this machine to the junkyard and get a real washer with realistic amounts of water! How are you saving anything when clothes require 2 times to get somewhat clean??? If youre reading this and considering a high-efficiency washing machine, DONT DO IT!! You will regret it. Im counting the days when I can junk mine!

I am thoroughly disgusted with Whirlpool. How dare they sell the garbage that they put out? I didnt buy the extended warranty when I bought my Whirlpool washer and dryer. Why should I when I put out all the money that I did? I havent had the product three years and had to have a repairman out to fix. And then the parts are so expensive, and they are cheap Chinese junk. I dont understand how something with a name like Whirlpool can put out such a disappointing product. Never again will I purchase your product. And I certainly will spread the word. Greed comes to mind for me. I see you have contributed much money to campaign (Republican). Have you ever thought about what you do to yourself? How absolutely disgusting you are.

In 2099, I purchased a Whirlpool Gold from Lowes. It has never cleaned my dishes, especially the pots and pans. My dishes also have a powder coating on them after various cleaning cycles that I have tried. I have tried every detergent available.The repairman suggested a detergent, which I already tried. He told me that the dishwasher uses only 1.9 gallons of water in total. That confirmed what I thought the problem was, not enough water! It is a design problem that cannot be fixed. I have bought Whirlpool for years but not in the future.

I couldnt wait to get a front loader and hated it. As soon as I saved up enough money, I bought the water saver Whirlpool top loader. I love it! The clothes get cleaner and dont smell musty. Im very happy with whirlpool.

Purchased model WRT311FZDMOO refrigerator on Aug. 6. Took 3 weeks for delivery. All 3 door bins for this refrigerator have cracked after less than 2 months. Called customer service. They say its wear and tear. And ask how many would I like to purchase. Looked online. Cost is 30.00 to 32.00 per bin. Cant put milk in the door bins. The cracks puncture the container. Poor quality plastic.

Every one of the knobs cracked where they engage the gas valve. One gas valve came loose from the manifold creating a gas leak discovered by the propane company on a system leak test. Screws came loose that hold the tracks to the base for the slide out bottom drawer. The AquaLift cleaning system is useless. Better buy some oven cleaner and rubber gloves. Very disappointed! One star because 0 isn’t an option.

After 2 years the motherboard failed on my Top load Cabrio washer. We had to spend $300.00 dollars to get fixed. When we called Whirlpool to see what they would do about it, they actually offered to sell us the board for $345.00 dollars and a 1 year warranty on the board. They actually wanted us to pay more from them than a local repair service. DO NOT BUY THIS MACHINE OR ANY OTHER WHIRLPOOL PRODUCTS. Also does anyone know of any class action lawsuits surrounding their obvious use of defective parts?

I bought a Whirlpool Cambrio washer/dryer set last year. I hate them. They dont get the clothes clean, let alone wet! I couldnt believe it! I put my grandsons bib in the wash and it came out completely dry with the stuck on food still there. My husbands shirts still smell like the cologne he put on! I asked a Home Depot sales person about this and he says, yeah, we hear that a lot. !!!!!!! Im going back to a washer with an agitator so that I know my clothes are being cleaned. This whole water control business is insane. Whats the point if you have to wash the clothes several times to feel like they are marginally clean? The problem is that the industry has decreased the amount of models that still have an agitator so my selection is very slim. First and LAST time I ever buy Whirlpool.

The washing machine is so loud when it is on, drowning out conversations esp when cooking or eating (it’s located in the kitchen). The machine tumbler has to be constantly readjusted no matter the size of the wash or how many times my husband or myself adjust the tumbler; consequently the washing machine is always dancing, making a horrible banging noise. The washer is under 6 years old. With that said, when you open it, the lip is all rusted out.

I bought my new Whirlpool Duet washer in April 2011 and the gas steam dryer in May 2011. In October 2011, the washer started to make a loud banging noise when starting the spin cycle. I contacted Whirlpool, and they scheduled a service call and stated that the washer was out of service. I told them it was and that I just bought it in April 2011. They said that the repair guy would need to see the receipt. Well, the A&E Factory service guy came out and said it was the bearings. Whirlpool only replaced the bearings with the whole tube unit and a few other parts. I was never told that all these parts would be mailed to my home, until I got a call from A&E about the tube being on back order. I was told that the part wouldnt be in until November 21, 2011, and it would take another week or more to schedule for a repair guy to come out. I called Whirlpool Executive Office (269-923-5000) and complained about all this. They said thats how it works--they ship everything to the customer and that there was nothing she could do about the back-ordered part. So I called Lowes corporate office and told them what was going on and asked if they could push Whirlpool into fixing my washer faster. About 4 1/2 hours later, I got a call from the assistant store manager; and they said that they would replace my washer with a brand-new one and would have it delivered in 2 days. Now, that was going above and beyond what I thought they would do. Just another reason why Ill continue to be a Lowes customer.Now, here it is, April 2012; and my dryer is leaking water into the drum. On Saturday, I went online and scheduled a service repair for Wednesday, April 25. Today, the 24th, I got a call from VIA that they would be out tomorrow and that I would owe them $120.00 for the service call as my dryer was out of warranty. Here we go once again, having to battle Whirlpool! I really dont give a dang what their dang system tells them about when I bought their product! I know when I bought it. And why did they keep telling me that Im wrong? They did almost to the point of calling me a liar!I called the Executive Office again and had to leave a message. Mark my words, I will never ever buy another Whirlpool product again! I will make sure that I tell everyone who I know at work and at home about the way Whirlpool handles their good customers!

I purchased a gas range stove about three to four years ago. I am extremely dissatisfied with this Whirlpool stove. This is the second time the electric ignitors have been replaced due to the stove not working and it is still not working right. The gas valve regulator has also been replaced because it went bad too and my oven still isnt working. I have already put around two hundred dollars in and no one has any idea why it isnt working. Apparently these stoves are a real piece of ** and everyone is having the same type of problems. Something should be done for the customers as it is now. I will never buy Whirlpool again. What a piece of garbage!

We purchased the Whirlpool Cabrio washer & dryer. The glass lid design is VERY POORLY constructed and should be replaced by Whirlpool. We paid over $200 the first time the lid broke and was told this is going to be a continuing problem. They were correct! We subsequently replaced the lid 2 additional times only to have the same break on the right hand side causing the lid to pop up. Something must be done and WHIRLPOOL need to care for their machinery. They should replace the lids or provide a major incentive for consumers to replace the washer. PLEASE DO SOMETHING!

First of all, Whirlpool is fully aware of the problems with water heaters and intentionally places requirements on the consumer until they give up. This info from a distributor. I bought 30 gal. gas water heater 7 months ago. Six days ago the pilot light went out. Went to Lowes (purchased there) and bought a replacement. Wrong one. Returned to store and was told they dont stock repair parts, call factory. Monday called warranty number. They offers to send thermopile, it would arrive in 5 days. I paid $30 for overnight. Plumber installed new part. Still doesnt work. Whirlpool says have the plumber call them theyll walk him through troubleshooting. I ask, Whos paying the plumber? They reply, You are. Plumber calls Whirlpool. They tell him to clean the screen. He does. They tell him to disassemble the burner. I stop plumber. I ask Whirlpool, What if its not the burner? They reply, Then well troubleshoot something else. Meanwhile Im 5 days without hot water. I go to Lowes where heater was purchased. The manager thought it funny Im another victim. I ask, Why doesnt Lowes stock heater parts? He says because Whirlpool doesnt let them carry parts. Im beat. I surrender. Parts from Whirlpool would take another 5 days and theres no assurance itll work. Lowes refuses to assist.I go to Sutherlands and buy a $450 Rheem on recommendation from plumber. Manager from Sutherlands hears my sad story and writes on receipt: Any warranty failure and Sutherlands will replace water heater free. He signs his name on receipt. I pay plumber to swap out heaters. Anybody want a 7 month old Whirlpool water heater. Like new. Cheap! By the way... I originally went to a major appliance parts store asking for a thermocouple for a Whirlpool. The three guys at the counter started laughing Hey we got another one looking for Whirlpool parts. They didnt have them either. Lesson learned.

My wife and I purchased our Whirlpool Duet Model # WFW95HEDC 7/19/16. I put my first claim in on 12/19/16. We were sitting downstairs one night watching tv and all of a sudden a noise like the sound of a tractor trailer putting on its jake brake came roaring from upstairs. It was so loud that we both jumped. The machine would periodically vibrate violently while going thru its spin cycle. The frequency started to get closer and closer together. Whirlpool had a technician come to our home. They came out 3 times and said that nothing was wrong. They said that it was vibrating because it was on a pedestal and upstairs on a non solid floor. They also blamed the loose water hose on the noise. SERIOUSLY??? After the 3rd visit, and a week before the 4th visit our machine started to leak. We paid $1,079.00 for this washer and we were having to take our laundry to a laundromat to wash it. The technician came out the 4th time and replaced a cracked drum. Apparently it vibrated so badly that the drum cracked. So everything seemed ok, then WHALAH!!! We wash the clothes and go to move it to the dryer and it is dripping wet. Somehow after they replaced the drum the machine started to not spin the water from the clothes very well. Takes drying the clothes for 50min 2x to get them dry. I am now set to have the appliance company come out for a 5th time and still not corrected. Whats worse is that every time I contact Whirlpool they give me the same canned speech and want to set up another appointment with the appliance company. I am soon at the year mark with my manufacturers warranty and still having issues. I think Whirlpool keeps kicking the can down the road without making good on correcting the issue so they can get past the year mark and make us take it up with Home Depot on our extended service plan. I feel bad for everyone out there who got screwed by this company.

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

I have a roughly 2-year-old 30 Whirlpool electric range that has just got out of warranty 4 or 5 months ago. It has been a great stove up until the last couple of months. We have had 4 incidents where the burner would shoot up to high on its own even with the knob down at medium or low. 4 times in the last month, it has come close to catching fire while we were cooking. I have contacted Whirlpool about this issue and have yet to get a response.

DO NOT purchase a WHIRLPOOL hot water heater!! The gas valve temperature sensors on these units are faulty. Our technician has replaced several of these defective sensors. Costs $250.00 to install - water tank is only a year old! WHIRLPOOL REFUSES TO ACKNOWLEDGE THIS PROBLEM!! We bought this particular unit because of the reputable name brand. They dont live up to expectations. Dont waste your money on a Whirlpool - youll be replacing it soon! Very disappointed in this company!

A total loss of money. Does not use enough water to clean clothes. Gets out of balance all the time. Do not buy.

Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

Have a Whirlpool side by side about a year and a half old. Fridge started getting warm, so when I contacted the Whirlpool co, they informed me and sold me a year warranty to cover what the problem is and anything that would go wrong in the next year. The warranty is through Assurant. After contacting them, I found out they could not have a repairman out for another week. Wasnt happy, but nothing I could do. They found out the compressor was bad, ordered the part which showed up the next day, but could not come out to install it for another week. Getting more upset. Put it in and my fridge was hotter than before. Called and they could not have anyone out for (you got it) another week. The new compressor was bad. Ordered a second one, came the next day, and they put a rush on the repair so I only had to wait 4 days this time. Guess what, it still does not work. Had to wait another 4 days for someone to come out. So tomorrow is the day. We shall see will it be another compressor and another week to put it in? I never heard of any company stretching a repair over a months time. I am so angry with Whirlpool, Assurant and A&E repair company; you just dont know. I would not recommend buying or going through these companies. This is very unprofessional.

Three failures in 14 months. First, the detergent dispenser broke. Next, right after the warranty would have been over (fortunately, I purchased from Costco which automatically extends warranty for another year) the pump failed and had to be replaced. Now the heat element is obviously faulty because the dishes are cold through all cycles. So I have to call them back again. I have no complaints about the service company. They were polite and reasonably prompt. Just appears that the product is JUNK! I am going to Costco tomo and will explain the situation. They probably can’t do anything but maybe they will go to a better product for others.

Having spent over RS 40000 on a so-called quality product one does not expect to spend nearly 20000 within the first two years of the purchase. 1. As soon as the warranty got over the PCB (costing 3000) broke down. 2. This replacement had a 3 MONTH warranty. Exactly after 9 months again the PCB breaks down along with leakage of gas. The service team asks us to buy a stabilizer to ensure that no such issues occur as they attribute these breakdowns to voltage fluctuations which are not of any precedence in Delhi. Also the product I am using was sold to me as a stabilizer-free working. 3. I made the suggested investments 4 months later the fan and motor of the freezer stop working. Imagine so much repair work on a new equipment. I have been writing to them yet all that they say in response is we are looking into the matter. NO ONE SHOULD BUY WHIRLPOOL REFRIGERATORS.

It works quite well except if you put items in the back of the top shelf of the refrigerator it will freeze them as if they were in the freezer section. I have a bottom freezer and that works quite well. And it is very quiet when running.

I saw on the Today Show that my Whirlpool Duet washer, purchased in 2008 was a mold-producing nightmare. We are now part of a class action lawsuit that seeks redress. When I called Whirlpool Customer Service, I was fed the company line that the problem is that we dont clean the machine regularly. The instructions call for monthly maintenance, but the rep said we need to wipe it dry after each use. This is an original defect in the machine that Whirlpool refuses to own up to. We had been Whirlpool devotees for years but will never purchase another Whirlpool product.

Do not bother purchasing Whirlpool refrigerators. Bought mine new in November. The paint on the exterior has been chipping. They inform me that its a cosmetic issue and that they are not going to repair it. They told me to use touch up paint. The paint has chipped more than once and Im afraid this is going to be an ongoing issue. Its obviously a product defect (my last fridge lasted 27 years without incident). I dont do business with companies who dont stand behind the products they manufacture. These days its all about get their money and the hell with them once we do. Last time I purchase anything Whirlpool.

Very concerned. First the microwave broke. It seems that is burning on the inside. The model number is MH1150XMS-2, purchased in 2005. I have had to replace the plate. I have read of many recalls, because of the potential of fire. My model was not among the ones on the recall list.

Whirlpool Cabrio Washer WTW7800XW is 13/14 months old (1 or 2 months out of standard warranty). We use it 3 to 4 times a week. The lid hinge developed a crack 2 or 3 months ago. Last week, it failed completely making the washer unusable. Investigations show that a new lid is around $250 plus tax and service call (approx. $500 complete). On contacting Customer Service, they continued to say monotonously out of warranty even though it is obvious to even a layman that this hinge/lid is not fit for the job and the manufacturing material has failed. They kept reeling off all sorts of protocols but would not send any of them as a copy. This is the worst service I have had from any company. The service is despicable and they should be ignored and banned from every consumer list. I appreciate that it is out of warranty, but the runaround I am getting seems to me that they expect their product to fail after the warranty expires and they are not surprised at all by catastrophic failures so soon.

Whirlpool Cabrio 6600 SW2 - Somehow a coin or two (?) are under the tub. It is not a high pitched sound. Just sounds like the machine is rubbing against the tub or something when it is being used. It does an excellent job of washing and spin drying the clothes, but the noise irritates my wife, which then irritates me. I took the top piece off and can see a coin DOWN there, but cannot reach it. Must I turn the machine upside down and try to shake the coin(s) out?

This unit has been in operation for over 40 years. It recently developed a freon leak. Rather than repair this unit that uses out of date freon I am going to replace the unit. I have had to replace the contactor twice and had to service the condenser fan once. All in all I think I got my money's worth.

I bought a Whirlpool washer (model wtw57esvw1) about 17 months ago. In that time, the same part has gone out three times. It happens every 5 to 6 months. The part runs 97 dollars plus labor. In the mean time, I am without the use of my washer. They say they are sorry, but they only cover their product for one year. After that, you have to buy their extended warranty so you can get it fixed by them. I feel that if I pay that much for a product I should expect at least 3 years without having to repair every 6 months! I have no washer. I am giving one star only because I have to.

When I purchased my Cabrio washer 31/2 years ago I didnt bother to check reviews since Whirlpool was suppose to be the best of the best. An expensive lesson! A washer that spits out codes?!?! Whos got time for this? We paid 899.00 plus taxes for it, now we paid a repairman 99.00 to tell us its not worth fixing. He said the bearings were completely shot. As he was leaving he said his next service call was for the same type of washer! Whatever happened to appliances that last! Going green is all the rage but yet everything from cars to appliances is built to last only a short while. Judging by these reviews I cant believe Whirlpool didnt recall their garbage!

We purchased a Whirlpool refrigerator because of the brand in August of 2011. Its December 2012, the entire door needs to be replaced. It appears the cost will be as much as the original $750 investment! We called Whirlpool expecting they would stand behind their brand after hardly 18 months, but no ... It is clearly a defective door to begin with.

Our new home came with brand new appliances. I love our Whirlpool microwave. Its reliable, quick & has lots of great pre-programmed features to assist with regular. The independent timer is a total bonus too.

I bought this piece of junk heater (serial no. 0804T411536) from Lowes and had their contract plumber install it in or about 2008. Since that time, I have had nothing but trouble with it. It just doesnt stay lit. Every plumber who works on it tells me that they have numerous problems with them and they cannot repair them - the customer has to get the part from Whirlpool. And today the woman I talked to told me that I had to pay the shipping charges, which vary according to how quickly one wants hot water! I personally find that a true rip off. If you cant guarantee the product you put on the market, then dont put it out there. I will never buy another Whirlpool appliance or shop at Lowes!

I purchased Whirlpool gas range with AquaLift Self Cleaning Tech exactly a year ago. DOES NOT WORK!!! The only Self that cleans will be you on your hands and knees. Still dont know what to use. Manual says do not use oven cleaner or abrasive or you void the warranty. Ok Whirlpool any suggestions? Soap and mild detergent not cutting it. You would think with all the customers complaining about this feature the bright engineers that designed this would come up with a solution.

This microwave lasted for 15 years! Worked great. Started looking kind of bad after 10 years but still worked. Amazing! All their products are great and last a long time. Would buy again. Boil water in minutes.

I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

Whirlpool microwave model # gh4184xsb1 handle is falling apart. I have replaced the hood vent twice and the entire door once and now, its the same problem again. The plastic becomes brittle over a year to two years of use and falls apart. Whirlpool will only stand by their one year warranty, and is not concerned about a problem that many of its customers are having. I have read many complaints on the web about this same problem. My wife and I have decided never to purchase Whirlpool products again.

Have had it replaced. It is not a great value. Need one with freezer on the bottom. Will buy another brand. Not 2 years old making noise and it sounds like someone pounding on the side after the doors are open. This is a side by side fridge and has space but I question when this will go out.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

We purchased a Whirlpool dryer almost three yeas ago. Its a front load, steam dryer--or WAS should I say. Almost a year ago, I was unable to calibrate the control panel (in other words, to change the cycle). Ive been advised by the tech that I need a new control panel $200. Really Whirlpool??? A $500 dryer that lasts two years?

Purchased both Cabrio washer (wtw6200sw2) & dyer brand new in 2007 for $1200. Within 4 years the motherboard went out. Whirlpool didnt want to fix it. They said it was past warranty. After many complaints to corporate, they sent someone out to repair it for $496 (they paid). Repairman said these models had motherboards from Japan & Whirlpool was aware of the many issues, but wouldnt do a recall. 2009, the springs went out, 2011 F codes began to appear. Clothes dont get clean; not enough water. 2014 & 2015 DU & DL codes appear. Now I need a new Lid latch assembly. These washing machines are not worth buying. Never again will I buy another Whirlpool!! My mom had an old Kenmore that lasted 20 years and only needed a replacement belt. No more fancy high end washers for me!

Microwave Model # MH1150XMB# - I have had this microwave for 6 and 1/2 years. It came with the condo I purchased. Shortly after I moved in, I noticed hairline crack in the frame near the handle. I have replaced this door once and now the second door has done the same exact thing - formed these hairline cracks in the door frame. This is a defective product and needs to be taken care of by Whirlpool. But you keep denying the problem. No one can afford to replace a door every year. The microwave still works, but the door has fallen apart. The remainder of the microwave works fine.

After only 6 months of use, the cooktop light bulb burned out. When I tried to replace it, the glass part of the bulb separated from the base. The bulb is screwed in so that the base faces away from the front of the microwave. With the small cavity and the backward installation, it will be impossible to remove. Now I have no light and dread how much a service call will be. The unit was installed by a contractor prior to our purchase of the house and it is now out of warranty.

Subject was included in our new condo less than 5 years ago. It appears that all we have to do is look at it and it falls apart. There is constantly another piece of plastic on the counter. Our experience in calling Whirlpool for service is that it is very expensive and time consuming. A refrigerator installed at the same time as the purchase had a defective ice maker which took three service calls and a final installation of a broken part by me before we were together again. 2 (two) service men recommended that if we had problems again that we do what they did. Buy Ice Cube trays!!!! What a great recommendation.

Do not buy anything from Whirlpool. This company needs forced out of business. Everything breaks down within weeks or months. I bought a fridge, dishwasher, and a washer dryer. Within 16 months they all went to the trash.

My stove fits my needs as I’m looking to simplify my life and not have a behemoth with books and crannies to scrub and clean or polish. I’m looking to cook less, not more and this stove fits the bill just fine.

I got a Whirlpool washer front loader model number wfw9151yw. Every time I wash sheets, they go into a ball. I called Whirlpool. They sent out a service guy. He said do not wash sheets in a front loader. I called the store. They said call Whirlpool again. Then the second service guy moved the legs down about 1 in. The machine still not right. I feel Whirlpool should replace the machine or give me my money back.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

I purchased this stove online and have been very happy with the features. I am able to use alternate settings based on the size of the Pan/pot. Cook timer, light, variable rack displays, etc. The only negative feedback is the need to add 5-10 minutes more to the temperature, based on the recommended cooking time of your recipe.

Four microwave ovens to finally get one that works. Four months after purchase, the French door fridge accumulated ice, 3/4 thick, in the bottom of the freezer compartment. I had no knowledge of this until the drawer became difficult to open and close. Lowes is replacing the unit.

Bought a model wdt730pahz in Nov 2017. Up until recently it ran fine and we were very happy. Some folks have reported that the soap dispenser door gets stuck. Same here. In our case we found, when using those detergent pods, to make sure that they are pushed all the way into the dispenser before you close the lid, or the lid jams. Other than that, the dishwasher got the dishes nice and clean. However, after just two years of using it maybe 3 times a week (there are only 2 of us) the motor died. Youd think a new motor ought to survive at least 500 cycles. Anyway, parts and labor was quoted at nearly $400. Debating whether to fix or replace the dishwasher. Might try ordering a motor and pump and replacing it myself.

When you first get the washer it looks like it can get the job done. Its the brand name and you trust to get the best clean from the washer. After a couple of months I dont see them clean. It washes with a couple of shakes back and forth and when my clothes are ready they seem like they were dipped in water. Not clean. It has all these fancy buttons for all different types of cycles and loads and they all seem to wash the same. As a mother of 3 kids I want my kids to put on CLEAN clothes. Not clothes that look like they have just been dipped in the water with detergent. I feel a good on cleaning board and my hands do a lot more than these high priced washers.

I bought a Cabrio washer in late 2015. All Ive had is trouble with this joke of a product. After three years it wont do any cycle, the people at Whirlpool dont care. Please dont buy any Whirlpool product.

I wish to file a complaint regarding a Whirlpool flattop electric range that we purchased approximately eight years ago. After the first year, a residue began to build up behind the glass on the front of the oven door. Finally, about 18 months ago, I decided to try to unscrew the back of the door in order to clean this since it got increasingly worse year by year. When I unscrewed the door, the side metal bars broke off and the range is to say the least, looked very unappealing . When the oven self cleans it makes the outside of the oven brown and very unappealing.This is a Whirlpool Gold, Super Capacity 465 range. We have been dissatisfied from the beginning. This complaint is not about the retailer, it is about the Whirlpool product. Please help as I am quite dissatisfied with this Whirlpool product at this time.

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

I got a new Whirlpool washing machine and dryer last year and Im very happy with both. I like the fact that it offers a quick cycle if you have a small load or need something quickly. If youre debating on what brand of washing machine you should buy I highly recommend Whirlpool or the other brands because Ive had really good luck with mine.

I just bought a brand new Sterling steel refrigerator not even 2 months ago, and since I got it, noticed rusty spots coming out,and now has spread all over. I called customer care, and they said it wasnt cover under the guarantee,and to buy a special spray out of my pocket expensive to remove the rust. I am Very disappointed with the service I received, for its not even 2 months old refrigerator and it looks like it is old now. In addition, the company didnt offer to send someone to take a look, checking and make sure theres no future problems with my new purchase, and as a courtesy removing the rust free of charge.

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

No matter what I do after I wash clothes on quick or deep water cycle or even running the cycle over again, the clothes are left with soap residue. This is very annoying, particularly on dark clothing because it stands out. If I could start over, I would purchase a washer with an agitator. I watch the clothes as it goes through a cycle and the clothes stay in the same position...no wonder they dont get clean. What a ripoff!!

Im on Whirlpool Cabrio washer top number 4. Well over $300.00 each, and washer doesnt work with a broken top. I sent a letter to Whirlpool telling them, NEVER again Whirlpool and my reason is the 4th top in 6 years. I received a form letter back... apologizing for a delay in response and, we hope you enjoy the rest of your day, lol. They dont get my level of dissatisfaction or better just dont care. Never again Whirlpool.If you search Cabrio Washer tops you can see thousands of dissatisfied customers... and still Whirlpool has the arrogance to say, occasionally failures do occur, but we can not explain. Really is your engineering that bad? A high school kid could figure out that the spring is to strong for the plastic housing and over time the plastic cracks. Really Whirlpool? A multi billion dollar company? Never again Whirlpool.

Whirlpool Dishwasher Quiet Partner III Model #8575637, White - Purchased in 2006. As of July 2013, I can say this is the worst dishwasher we have ever owned. After normal use (once a day or less), the plastic on the front control panel began cracking in the first year, and the button covers have fallen off completely. Dishes were never completely clean (at least not as clean as other dishwashers). Dishwasher leaked out one side and needed repairs. Now it is in need of a new valve, because no water is coming into the inner cavity. Repairman says it is likely that the control board, which is getting moisture into it after losing buttons, etc., will probably need to be replaced soon as well. $300 more to spend on a repair bill. SAD (AND DANGEROUS!) THAT SO MANY APPLIANCES ARE ADDING UP IN OUR LANDFILLS. There should be a LAW requiring appliances to last a certain number of years, and to clearly state their expected life on the appliance when you purchase it. Planned Obsolescence is a common business plan these days, but there must be some control on what is allowed! (I may go ahead and repair this model just because I feel bad adding one more piece of junk to our collective global pile! Sheesh!!) And all those energy star, were so green advertisements? Well, if its soon to be sitting in a landfill, its NOT so green! I am willing to pay more to purchase appliances that will last a number of years, not need many repairs, and function as they advertise... Thank goodness I kept our very first Whirlpool refrigerator - never needing any repairs and still running like a tank out in the garage. (So I know Whirlpool, at least at one time, was able to build a quality product!)

My Whirlpool Duet washer was purchased on August 2006. The first one had to be replaced as it flooded my laundry room on the first floor and the basement – not once but twice. When I was told that they would send yet another service person out to try and fix it, I told them it would be at the curb and that I was looking forward to filing a lawsuit. Then after being on hold for forever and getting the company that sold me the unit involved, they replaced the washer at no charge.From day one I hated this washer machine. If you failed to take the clothes out immediately after washing, they would get a musty type odor and I never felt the clothes got cleaned enough. Yesterday, I went to empty a load of laundry and it was soaking wet with water pooling in the bottom of the barrel. Today, I had a certified Whirlpool tech come and look at the washer and he told me to put it at the curb as the rear bearing is shot and needed to be replaced. He also told me not to buy another front loader and the cost of the repair would be approximately $800.Thank you to Whirlpool for manufacturing a true hunk of crap that, may I say, cost me $1300. I will make sure I tell everyone I know that your products are crap and I would rather wash my clothes by hand. I did call the WP customer service number and was told that this is unheard of and that these machines rarely have any problems. After just reading multiple complaints of the exact same problem, I now know that this product is inferior and the design of the bearing assembly is seriously flawed. A major recall is probably in the near future and Whirlpool is hoping that most people will just dump them before the recall is made public.

We our adding our name to a list that is remarkably long. We purchased a top loading Cabrio washing machine just over a year ago and the problems with the balancing of the unit are the same as everyone else who has written in. The service company A&E has promised a lot but has done little to resolve the issues we have had with the machine. One representative told us that she would order the part and have it sent to our home. When the part did not arrive, we called A&E back only to find out it was never ordered because the service technician would not return their phone calls. I find this excuse ridiculous and similar to other false statements they have given us on the other four phone calls made to address the problem. After reading these reviews, we realize that this is only the beginning of what will be a frustrating and costly experience. Never again will we buy a Whirlpool!

Our Whirlpool is 8 years old and - knock on wood - it has been very dependable. It has enough settings to take care of the range of our dirty clothes. It is a front loader and I like that type - it gets the clothes clean in cold water.

New whirlpool washing machine 2016 - This washer is supposed to be smart, but it NEVER fills up with water! I always have to fill a bucket with water and throw it in the washing machine. My clothes do not come out smelling fresh and its not the detergent to blame, its the washer! Im so disappointed with this product. Whirlpool should stop making products.

I bought a Whirlpool Cabrio washing and dryer in 2011. I have replaced the lid on the washer 3 times. It comes apart in the back of the lid and it will not lock in place so it will perform. I have called the manufacturer several times. They have not been of help as to why this happened. Im upset. They have no suggestions. I have owned Whirlpool appliances for years and this is the 1st time this has happened with no resolution. I just want it fix or explain why its happening.

Because the Korean appliances are a problem for repairmen, were stuck with a Whirlpool choice. Seems to be a good fridge. Noisier than my Kenmore (Korean). I got instructions from repairman on opening right door first and closing it last. Otherwise rubber wears out too soon. If I put anything on left door opposite ice maker, it freezes, making that shelf useless! We had ordered a Kitchenaid but the installers damaged it.

I have had this washer for about 7 years. I have not had any problems with it. I wish that it is stingy with rinse water. I see suds on the items before the rinse cycle and it doesnt seem to use enough water for a good rinse. Therefore I use the extra cycle.

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

I purchased new dishwasher, range, microwave, refrigerator, washer and dryer 16 months ago. I have had problems with everything except the dryer! Lowes even traded my washer in for another because it could not be fixed.

I bought a Duet front load washer and dryer set in January 2009 from our local Lowes. Spin cycle noise progressively got louder over time to the point we contacted our locally owned service company to check it out in June 2011. Cause is defective shell and spin tub, total repair cost $750. This was about the original cost of the washer! I contacted Whirlpool via e-mail (wait time via their phone is outrageous), they wont do anything. Out of warranty. Up until now, Whirlpool has had a good name with me. Not anymore. I will never buy anything Whirlpool manufactured ever again. (Maytag, Kenmore, maybe more brands.)American companys insensitivity such as this is what gives some of American industry a bad name and drives consumers away to quality foreign brands made in Europe: German, Swiss, Italian, Swedish,etc.Im going to take a hard look at Bosch washers to replace this Whirlpool piece of junk.

Got this refrigerator when I old one of 10 years through AHS home warranty. I asked for a similar one to the one we had. Surprisingly we received the Whirlpool which turns out to 5 times better than are old GE. Same height and width but deeper and with more compartments. We are extremely happy with it

I bought an American US Craftmaster water heater in October 2006. I have paid a plumber 3 different times to work on this and the pilot light will not stay lite. I used the replacement parts they sent, followed their technicians directions over the phone, etc. Nothing seems to work. Christmas was not pleasant at my house this year. I’m still taking cold showers.

Cabrios have an inherent F1 error problem, The company had an initial recall and fixed it once, but problem reoccurred about 14 months later. Company declined to fix it. If there is any type of lemon law on appliances, this would apply. I would not recommend this washer.

I too expected a whole lot more for the price I paid for Whirlpool WTW5000DW1 HE washer top load. Fuzz, grass, pet hair and food remain after washing. Had a repairman out to look at it. There is nothing wrong with it. He says they do not use much water to save money. Well, if I a have to wash everything at least twice am I saving money? Think. Will look into an old fashioned washboard next time. Frankly I think it is a scam. The HE Tide is more concentrated and my clothes do not come clean! Tried to get my money back from the company that sold it to me and I was told only if I were to buy the $900 Speed Queen. Someone’s making a lot of money from consumers who need washing machines.

This company has terrible, deceitful, and pass the buck practices. I purchased a Bravos MCT top loading Maytag washer from Home Depot. Maytag is now owned by or has been acquired by Whirlpool. First I was a little disappointed to learn that because I had previously purchased two Whirlpool made washers and got no more than six years of service out of both them. But from the day this washer was delivered it did not perform as it should. I called and texted with the hours provided for rejection of the washer and was told by a customer service representative that it would be replaced. The main problem was the spin cycle. With only a few clothes in it, it jumped all around and moved so much that it was sitting in the middle of the washroom. Thinking that occurrence was a one time thing, I stopped it; cancelled the cycle; and reset it. It finished the load. This occurrence was reported and simply fell on deaf ears. I was lied to and told a replacement would be made; it was not. I have sent numerous emails and have made several calls for more than a year now and I still have the same defective washer in my home. Each time I emailed, I received a different message from the customer service person. This company wants me to pay for a service call or buy an additional warranty for a defective machine they produced and refuse to honor their replacement policy— which they now say is the responsibility of Home Depot. Luckily I have kept every email and document I was provided. I am being forced to file a claim against this company to get their attention and to remedy this situation. The expense of the claim will be greater the cost of purchasing another machine, but it is this kind of behavior, on the part of A corporate giant, that is makes life tough for everyday people like me. Stay away from the Whirlpool name for washers—even a prior good name brand like Maytag.

Whirlpool microwave oven a few months old stopped working. Customer service center not helpful with prolonged holds (>30 minutes), no response to email, and amazingly no response to live chat. The 800 number was busy at one point for over an hour. When I finally did get thru, there was no coordination with local repair men, and a factory delay on the parts. I am going on 6 weeks without a functioning microwave and 3 kids at home. Thanks Whirlpool.

Easter is in five days. Our dishwasher purchased in December 2014 is not working. It has been broken since December 2015. Repairmen have been here THREE times. We were told that our warranty only covers parts and repair. Our dishwasher does not wash dishes. We went for a more expensive model and it didnt last a year. Whirlpool, remember your commercial?

The washer is a lower priced but basic machine with few bells and whistles. However this is what we wanted. Less tech with less problems so for us it works. Does the job it is required to do. Cycles do take much longer than our old machine did. Probably due to water conservation.

This is an EXTREMELY dangerous range. The burner knobs leak - turn on with just a bump and leak gas. Any slight movement causes the knob to move and allows the gas to leak before the igniter ignites the gas. Has happened THREE times!!!! Has this product been recalled???

We bought a Whirlpool range with glass cooktop and convection oven to replace a 20 year old stove which had served us reliably but was beginning to look a bit dated and worse for the wear. The new range was installed in February, less than 2 months ago. Today, while I was preparing Easter dinner and had a ham in the oven, the cooktop elements refused to heat, even though the cooktop on light was lit up. We followed all the troubleshooting tips we could find in the user manual and online, but nothing worked. We decided to do the rest of the meal in the microwave and just finish the ham in the oven (which had been working). Then the oven failed, and would not heat back up.As a last resort, we pulled the range out and unplugged it, to perform a hard reset of the electronics. (This was recommended in some of the online troubleshooting tips.) No joy. Both the oven and cooktop elements will not heat, even though the lights on the control panel light up. Now we have to call a service technician to come fix it in the middle of a pandemic. How can a brand new and expensive range be less reliable and less useful than the cheap 20 year old stove we just got rid of?

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

At after 4 years of use, my double door refrigerator is giving cooling problem. Upper refrigerator part has excessive cooling and lower part has no cooling... after complaints in customer care, engineer was sent who changed the part that regulates auto cut... it gets blocked by ice so cooling air is not reaching lower part. Once changed exactly after 5 days same problem started... In spite of complaints no one came to check for good 2 wks. After long fight, it was defective board that was changed again. After 3 days same problem again, board was changed... Now after 2 and half month same problem. And now today service center has replied that engineer will be sent after one week.

Oven was purchased new from Home Depot. Right off, the top black glass surface got scratched. Not sure how it happened. Seems to scratch easily. Then, the oven temperature for baking was found to not hold consistent. While pre-heating the oven for 350 F, the temperature goes up to 375 F, then well into the baking time, can drop to 100 degrees less (275 F). Oven feature is called accu bake. It ruined the baking and seems to be anything but.

I purchased model #GI7FVCXWY01, SERIAL #KY4234335, and it arrived in Jan 2010. It is now going in the trash! Two repair companies came out and both told me the ice maker had issued a recall, but in reality, Whirlpool told me to buy the replacement part for $348.73 to fix their poor design! I called the 1-866-698-2538 customer service and so sorry is all you get! By the way, neither of the repair were willing to install the replacement part, as it takes too long to install and these compressors are never the same after the ice maker has these issues! Both repairmen said to trash the refrigerator. How sad that a $2500 refrigerator only last from Jan 2010 until June 1, 2014!!! I will never buy a Whirlpool anything!

I purchased this refrigerator, approximately 3 yrs. ago. Right away the top crisper broke. I have put up with this broken crisper only to have broken the PLASTIC lips that hold the crisper to the top shelf. Piece of junk. I looked to order a new crisper but way to expensive so I just suffered thru. I cant even use it anymore as I cannot open or close it without it falling onto the bottom crisper. Would like to throw the thing out, but cannot afford another one. IT WILL NOT BE A WHIRLPOOL!!!

DOES NOT MEET CONSUMER NEEDS AS PROMISED. I wish I read the reviews. Very expensive machine I purchased specifically for the large drum for large loads. The machine cannot handle large loads (if you consider one blanket large load). I have to unplug the machine mid wash, as the load gets stuck on one side and moves my machine across the floor. The noise in the spin cycle with even small amount of laundry sounds like a helicopter is about to land. Then last night I noticed black oil splattered all over my floor. This is a $800.00 machine. Never ever met my exceptions as the machine promised to deliver. Theres very little water that enters the drum... Not even my towels come out clean. DO NOT BUY WHIRLPOOL... EVER EVER EVER.

I have had our new Whirlpool Cabrio Washer for about a year. I absolutely hate it. I along with all the other people that is complaining about their Cabrio. I have found it to stain my clothes, not get them clean... Sometimes not even get part of them wet. I wash every load now no matter how small on the deep water option. I still have to add about 3 to 6 gals of water after it fills to try to help them get as clean as I possible can. I have stopped using fabric softener because I believe that is what may be leaving the stains on the clothes because it doesnt dilute it. Also you cant soak clothes in the washer long enough. I know it offers a presoak but when the clothes are not getting wet... That is not soaking. I tried to fill it up and raise the lid so it wouldnt wash until I was ready for it to wash but it automatically emptied the tub after a short time.It is funny watching the clothes when washing... Even I could tell they were not going to be washed well. I thought who in the world developed this washer. Certainly no one that had ever really considered what women need to wash clothes on a daily basis. I would sell it but I dont think anyone would buy it. If there is a class action suit I would consider joining in. Whirlpool could not have spent much effort in checking this washer out. A lot of money down the drain. I did not buy the dryer because of the lint vent being on top of it. What a mess those make when you have to empty it. So I purchased a Maytag Bravos XL. Now that is a wonderful dryer! As one homemaker to another I suggest you check it out. Never had one I liked more.