Four years ago, I purchased a Whirlpool refrigerator - French doors (ice and water in the door) and freezer bottom drawer. Against everyone but the HH Greggs salesmans advice, I purchased the extended warranty as I had paid a large sum of money for the refrigerator. Within a year, I began experiencing problems with the ice maker. Over the next few years, I had to have it repaired/replaced an additional three times. Add to the whole mess the incompetency of the A & E Repairmen that required at least two visits each time to complete a repair and their inability to arrive during a 9 hour window, I stayed livid about my refrigerator for three long years. Finally, I demanded a replacement refrigerator under the lemon portion of my warranty. After numerous arguments, the warranty company offered me several different makes and models to pick to replace my hunk of junk. Stupidly thinking that my problems were related to one bad unit, I selected another Whirlpool only to have it completely crash a little over one year after acquiring it. I lost the food in it and am having to wait almost a month for the parts to arrive and the repairman to return. According to him, it will have to be completely rebuilt. I will never, never buy another Whirlpool!

I purchased this Whirlpool washing machine in July 2009. The repairman just gave us a $1400 estimate for repairs due to failure of bearings. This is an energy efficient, expensive appliance that we expected to last for years and we feel that 2 1/2 years of service is unacceptable. We did not purchase an extended warranty and Whirlpool said they would help with the cost of parts - not labor. We cannot afford to repair a lemon and so purchased an LG front-loading washing machine today. Hopefully we will have a better experience with LG as we will not be purchasing any more Whirlpool appliances ever.

This is new and replaced an old model that was not doing the job. This new one seems to be ever so much better. The dishes are clean and I no longer have a white residue on the dishes and utensils. It is easy to load. I miss having a silverware separator for the holder because the silverware tends to be too close to each other. I always rinse things well before putting them into the machine because I usually run the machine about once a week. Overall, this is a good machine for the price I paid. I am loyal to Whirlpool and this one on sale was a very good value. Very pleased.

Stove was purchased in June, 2021. Two months later, oven will not heat up!!! Contacts Whirlpool, and TEN days later, a service person finally shows up. Problem appears to be a circuit board that they dont have, and has to be ordered! When will it arrive? He has no idea!!! I called Whirlpool, but its frustrating and a waste of time. You only get to talk to someone that appears to be reading from a script! If were lucky, well be without an oven for one month; however, it could be two...or three...or four!!! My advice: Dont buy this stove/range!!! Not only is the oven an issue, but it just seems flimsy and subpar quality, especially the oven door. Added to that, the glass top is very difficult to keep clean... Worse than any glass top stove weve had in the past.

Whirlpool has always been known for quality products. But the range I haves burners are failing. It is eight years old. Think it should last longer than that. The oven works good, but the temperature varies as well. Lower oven door is designed bad, because grease gets trapped between the two glass doors and cant be cleaned.

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

My Whirlpool washer is lasted 15 yrs and is very good at cleaning clothes, it is also easy join my water bill. I purchased mine at Home Depot. They also finance. I hope you enjoy your purchase. I know I do.

I purchased a Whirlpool 50 gallon gas hot water heater 3 years ago. I have 3 daughters all in school age. When my old one finally quit due to tank failure and out of warranty, I went to Lowes and bought a 6 year warranty hot water heater costing around $600. Now I figured you get what you pay for RIGHT! WRONG! So about 2 years ago the pilot light started to just go out on occasion, a bit of an inconvenience but there was no default code warning me of any other issues. So typically we just relight it. I called Whirlpool to get help with this issue, but they wanted me to pay for a technician to diagnose the problem. Um isnt that what the warranty is for? I said dont bother. Im not paying $150 for someone to tell me what I already know. Ill just keep relighting it myself. So finally the pilot light goes out for the 100th time but this time I go to reignite it and BOOM! It sounded like a twelve gauge shot gun going off in my face! Then it flutters flames into the chimney of the hot water heater. Scared the crap out of me at first. But it finally stopped and run fine. Well Im laying in bed a few nights later and woke up to a loud thumping noise, I go down stairs and it stops. The following day Im in the kitchen and THUMP THUMP THUMP BURP BURP BURP. Run over to the hot water heater closet and theres the flames shooting out of the gas valve into the hot water heater then BOOM! Its out! The valve unit finally took a crap I guess. I call Whirlpool again to get my warranty - this time it definitely needs to be replaced. So the guy tells me the parts are covered in the warranty but a technician needs to look at it first and the technician Ill have to pay.. Excuse me but what the ** did you just say? I have to pay for a technician to look at your failing part? No I dont think so! Just send me the part - Ill replace it myself. Im a millwright electrician by trade. I specialize in power plants and refineries. Im sure this little gas valve wont be a problem. I spoke with these idiots on a Friday and he said I could have it ground shipped for free and it should be here in 5-6 days or pay extra for quicker delivery. What the hell did he just say? I could pay extra for quicker delivery on Whirlpools faulty part? ** whirlpool should be saying Well have the part overnight to you.Now since it was a 3 day weekend theres no sense in me paying $40 to have it delivered 3 day because it still wouldnt arrive until close to the five day. So I just looked to see where my damn part is because it shouldve been here by now according to the guy on the phone. NOPE! Its set to be delivered in 5 more ** days. DONT BUY A WHIRLPOOL PRODUCT. THEY DO NOT PRACTICE ETHICS.

This will be the last Whirlpool appliance I will buy. We purchased this Whirlpool refrigerator Model # ED5GVEXVD literally a few days over 2 years ago. It is a side-by-side refrigerator with shelves that are supposed to slide out, however, we have never used it in that capacity. The problem is that the plastic frames on every shelf, even the ones that do not slide out over the bins, have cracked in no less than 2 places on each shelf.We contacted Whirlpool over a month ago. The good news is that they responded quickly. The bad news is that they stated, It is unfortunate that you had problems with the shelves, but we are unable to do anything for you because it is out of warranty. If you would like to purchase replacement shelves, we could order them through their consumer parts department. This is such a crock. If it was one shelf, I could justify the possibility of it getting smacked or something overweight was placed on it, but every shelf? As I said, not a single shelf is crack free, including the ones that sit directly over the bins, which should have additional support from the bin construction.By the time I replace every shelf that is cracked, it will be equal to what I paid for this refrigerator 2 years ago, and it will net me maybe 2 more years of service. If I have to invest that kind of expense into it, the refrigerator will go to the recyclers and I will buy from another manufacturer, which will definitely not be a Whirlpool or Whirlpool subsidiary.The cracks were noticed early last month. The cracks are already getting larger. I will no longer allow my children to get anything out of the refrigerator since Im afraid that the shelf will crack, the glass in the shelf frame will break and we will have an injured child, which instead of reaching this website, I will be contacting a lawyer. I need to do something with this refrigerator, but with the economy, I cant afford to just keep replacing a $1,000 refrigerator every 2 years.This refrigerator does not get extreme use since it is the 2nd refrigerator in the house. The primary fridge has been in our house since 2005 and I wouldnt trade it for anything. This Whirlpool refrigerator, however, is poorly made. The materials that the refrigerator shelves are made from were just a poor engineering decision because it is not holding up to mild to moderate use without cracking.We purchased this Whirlpool appliance thinking we were getting a quality product from previous reviews we had read, however, this is obviously no longer the case with this company and seeing the complaints that I now see online. Someone would have to give me really compelling evidence to make me decide to ever purchase another Whirlpool appliance again.

I have the same problems that all the consumers are complaining about. I have a Whirlpool refrigerator with the freezer on the bottom. I have it for 2 years to date, and it doesnt keep my food cold. I loved the roomy space it had; thats what sold me the refrigerator. If I would know what I know now, I wouldnt have bought it. I will never blame the business that I bought it from; I will blame Whirlpool. Hearing all what the consumers did to try to fix the problem, it sounds like a waste of time and money. Im sorry to hear what you went through, but also I want to thank you for your complaints so I dont have to deal with it. Whirlpool sounds like a piece of junk. I’m going back to a GE.

Just like a lot of other people, I bought a Whirlpool hot water tank because of the good name. And just like the other people, my tanks pilot light will not stay on, it will be on for a few days and then you get up and no hot water.

GFG461LVT2 - In October of 2010 I purchased a Whirlpool Gold Fridge and Stove. Its been about 3.5 years and two of the caps that go on top of the range burners are chipped. All of the caps are badly stained and despite the manual instructions to wash them in mild soapy water, they do not come clean. They dont come clean using heavy duty Easy Off cleaner. In addition, the seal on the oven door has apparently failed because the glass is foggy on the inside. Today I phoned Whirlpool after going to their website. I first spoke to a parts representative who advised that I would have to pay $47.00 per cap or $115.00 for all five burner caps. I was transferred to another department as I thought I should get the appliance parts and door fixed for free. The appliance is only 3.5 years old. I was told that the appliance is only guaranteed for 1 year and I would have to pay dearly to remedy the two problems. This appliance is Whirlpools Gold series. It supposed to be top-of-the-line - the price tag was certainly top of the line. Im very disappointed in American workmanship and the companys lack of integrity. Not too long ago I purchased a Whirlpool (aka Maytag) front loading washer. I now own a Samsung. The point is that designed obsolescence will force consumers to purchase products made outside of the US because some of us cannot afford to buy or repair appliances, cars, etc., every couple of years.

We bought a top loaded Whirlpool washer, model WTW5000DW2 last May from Lowe’s for a summer beach cottage. It has been a terrible experience. There was a 30 day warranty from Lowe’s which unfortunately we missed because we had not moved down for the summer till after the 30 days. Working through Whirlpool, they sent an independent contractor out 5 times over the summer. Control panel was replaced twice. It never worked properly. I’m now back for the summer, and it still does not work. Do not buy this washer.

On its 1st year, the water pump went out. It cost $200.00 to replace it. On its 2nd year, the circuit board went out, and it took $300.00+ to replace it. On its 5th year, the bearings went out and cost $250.00 to replace it. I bought this for $900.00, and I already have paid $750.00 plus the price of purchase which makes this washer $1,600.00. Whirlpool should compensate all of us who have worked hard and have purchased this product! I will never purchase from Whirlpool again. I can’t afford them. I should get a refund from Whirlpool. Don’t they care? Email me for these problems at **. I am so dissatisfied with this product.

In July I purchased a Whirlpool Gold oven and cooktop from Lowe’s. It was delivered in Aug. after a 5 wk wait, since it had to be ordered. Since installation, the hot surface light on the cooktop stays on. I called in & was told to try resetting the elec. breaker. Did that... still stays on. Model G7CE3034XB00, Serial D43005649. On Sept. 4th I called & spoke to Carrie (I believe in TN) who told me she would try to find a service tech in my area & would get back to me in 3-5 days. Apx. 5 days later she called & left a message on my cell phone stating that she could not locate a service tech in my area. I would need to find my own service tech & submit any invoices to the resource dept for reimbursement. Parts could be ordered at no charge. I have nothing in writing from the company to confirm I would be reimbursed, nor was I told how to correspond with the resource dept in the event I had an invoice to submit for reimbursement.Today, Sept. 18th, 2014, I called Whirlpool again (800-253-1301) & talked to Stephanie in Michigan. She told me the same info. When I asked to be sent a wiring schematic I was told I didnt need one. When I asked how to get in touch with the resource dept. I was given a fax no. & email acct. When I asked how I was supposed to get in touch if I didnt have either, she said I should go to the local library. Now lets imagine for a moment that I am disabled or live so far out in the country that I cannot get to the library... How am I supposed to get to a fax or email acct. Has anyone at Whirlpool considered that? This is a new appliance under full warranty, yet it has become my job to find a service tech, pay up front, & wait for reimbursement. REALLY??? I am also in the market for a new dishwasher & you can bet it wont be a Whirlpool!

I purchased at Lowes and they say was without warranty. I have had all kinds of trouble. The pilot light was replaced in the burner easily because of recall. Now the pilot will not stay lighted unless you tap on the gas valve. Then as soon as the water temperature comes up, the burner and the pilot light go out. I went to Lowes for a new gas valve. They have one for natural gas of $58. They do not stock for propane. I have to purchase from Whirlpool which costs $228. Their comment is that it is more expensive to build another. They do not change offices any longer because of PSi difference bull crap. I purchased a Whirlpool gas stove 2 to 3 years ago and I had to purchase an LP change over kit to use it. This is nothing but a case price extortion. I will never purchase another Whirlpool product again and I would advise no one else either!

I have had this front loader for 5 or 6 years. My clothes absolutely stick, I cant stand the smell of them. I have used Affresh, the recommended cleaner 3 days in a row, multiple cycles, no improvement. I did the vinegar treatment, leave the door open etc. What is upsetting is I have read Whirlpool has been aware of the mold and mildew problems of front loaders yet continue to manufacture them. The gasket in the front enclosure pockets at least a cup of water and other gunk from the wash. A waste of money!!!

The washer and dryer are great. They were a reasonable price and they have not failed on me yet. Thank God. I like the little reservoirs where you could put your fabric softener and soap which this one does not have but it was a good price so I ended up purchasing it. The whole family puts all their clothes in it and it runs on a daily basis so I have nothing bad to say about it. Thats for sure.

We purchased a Whirlpool Cabrio washing machine on 3-18-16. In February of 2017 the washer died. I was bleaching my whites at the time so most of the clothes, whites fell apart because they sat in bleach and water for 2 days. I had to figure out how to get them out without getting bleach and water all over my clothes. I called whirlpool and they got someone to come fix it. The tech came and said we needed a new control panel. We waited 3 weeks for the panel. He came on 3-24-17. He put the part in. Took less than 10 min and said, All set. I went downstairs and put a few things in. I was a bit leery and the machine started. I went back upstairs and I hear beeping. I go back down and the machine is flashing again. I called the repair people they said, Unplug it for 10 min. It may reset itself. If it doesnt, call back. It didnt. I called back and wanted me to wait till the following week. I told her I had clothes in there.Someone came the next morning and said it needed a harness and they would order it. Well its the 28th and I havent heard anything. I have called whirlpool several times with no satisfaction. We had the machine less than a year and its been dead for 2 months. I am disabled. I have multiple sclerosis so every day is a new issue. I hate to put that in here but I want you to know what Im dealing with along with a dead washer. Any help you can offer would be appreciated.

Cabrio washer 2015 model - The worst washer in 40 years. Everytime I use it I ask myself why did you buy this? Sure it conserves the amount of water but I havent noticed a nickel in savings because you have to wash the same load a couple of times. Since the days of cleaning in a stream clothes have been beaten to remove soil. How in gods name was I fooled into thinking this washer would actually clean our clothes. I put a folded tablecloth in it and when I emptied it the tablecloth was still folded. IF YOU NEED A CLOTHES WASHER TO ACTUALLY CLEAN CLOTHES, DONT BUY THE KIND WITHOUT AN AGITATOR. (serial # C52242825)

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

I have a small condo and this dryer fit into the appliance closet with a few inches around it. Every home needs a laundry system. I bought the washer and dryer in this model. Whirlpool is great!

Our over the range Whirlpool microwave door casing is disintegrating where the door handle screws to the door. Big chunk fell off today.

We have front loaders. Far, far less damaging to the clothing than a top loader with agitator, would never go back to top loader. That comes with a caveat though. There is a difference you may not realize between the two styles. With a front loader comes a little maintenance. You will need to clean the washer periodically. Most all the stores sell the cleaning tablets and no, not all cleaners are created equal. I will only use Affresh after testing most of them. With a front loader there is always some water in the bottom of the drum, even after the cycle ends and even when it looks empty. So if you wash real dirty or smelly things, you’ll want to run an empty cycle to rinse out that leftover water or run with cleaner.In between wash days you’ll need to leave the door open so it doesn’t mold or mildew. The door gasket/seals will show mold and mildew and or you’ll get a mildew smell in your clothing. The only issues we’ve had with these units were the learning curve on front loaders in general and with the dryer we had the water valve for the steam function stick open (after 5 years) but it was due to calcium build up from our well water, not a issue with the machine itself.The dryer lint screen could be better. It is vertical so as the lint builds up during a cycle it drops to the bottom and accumulated at the bottom falling off as you pull it out each time to clean it. The lint catches on a crazy amount of extrusions inside the lint trap which also makes it nearly impossible to get down in and effectively clean all the crap out. One last thing if youre changing from top to front loaders. Buy the peristalsis, they’re expensive but it’s a pain in the butt to get stuff out if you don’t have them. Overall we’ve been very happy with our Whirlpool front loaders and would confidently recommend them to you.

I have both Whirlpool washer and dryer. These are my second set. Whirlpool is reliable & long running. I love this brand! My dryer is six years old and the washing machine is nine years old. Never a problem and they do about six loads a week.

My microwave is very reliable and has lasted a very long time. I have never had a problem other than the circular glass plate that broke. It took me a little time to get use to the timer on it which is a little different than other microwaves that I have used. Overall a good buy.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

We purchased a 4.8 Cu FT High Efficiency Front Load Washer in February of 2016. What a nightmare. Just a few months after having it, we kept getting an E3 error message that would not go away. After 2 weeks of waiting before a tech could come out there replaced a door mechanism said it would be fine. After the next wash same thing, same problem. Could not even open the door to get my laundry out. Again they could not get a tech out for at least 2 weeks so Im stuck with the cost of getting my laundry done elsewhere. This time it was the motherboard. Had to wait a week for that to be shipped out. This was all completed in June 2016. We are now the beginning of September and same problem. Again we are told at least 1-2 weeks to get a tech out. Seriously Whirlpool, we are your customer. I have a family and we need to wash our clothes. We spent $1200 on this machine only to have to take our laundry to a public laundry mat because your machine keeps breaking down. They will not replace the machine even though this is the 3rd time with the same problem. The customer service is horrible. They are not willing to help in any way to get this fixed much sooner for her or give us a new machine. This one is obviously a lemon! I will never purchase any Whirlpool appliance again and I suggest based on some of the reviews on here no one does. Next appliance I buy I will do more research for sure.

Weve had our Whirlpool Cabrio washing machine for about 3 1/2 to 4 years. At first, it left our clothes wrinkled, so I purchased a steamer to help remove the wrinkles. After a few months, it started making a terrible clanging noise. My husband was able to repair and it ran okay for a while. Over a few months, it got louder and louder. It does not get our clothes completely clean. Some even come out dry on one side. Now, we are getting an F50 code and it shuts down after 1 minute. After reading the reviews, I agree Cabrio is a bad product. What happened to the trustworthy, best value Whirlpool name?

Bought a higher end Gold Series French door refrigerator. Immediately the door would malfunction and the the piece that pops out to seal the gap between the 2 doors kept piping out when the door opened...They came out and replaced it which did nothing...The repairman said we have to open the door slowly...Give me a break...Have a older cheaper model that is almost the same and its always been flawless.Now in year 2...the whole system shuts down out of the blue and thaws everything then suddenly works for a few months...Repair guy says cant do anything if he doesnt see the problem...Just got back from long vacation...We turned off the ice maker and emptied...Returned home to damaged wood floors and a bin full of ice...System reset when it restarted and started making ice...2 years old and we have a Samsung on order and the Whirlpool is going in the trash...Weve had many whirlpool products and the defects are getting worse every year...Absolutely done with them!

I bought a Whirlpool over the range microwave in 2015, after about 6 months in I noticed that the microwave door was starting to crack. I thought maybe I bought a cracked one. About a year in the microwave is cracked. Pieces of the microwave are starting to fall on the food I am cooking. The last straw was when my 4-year-old was gagging and then choking on a piece of the plastic that fell from my microwave.

We have had a Whirlpool hot water heater for 6 years and 14 days. Note the 14 days. It has been nothing but trouble and we have called the company repeatedly for help. It finally stopped working altogether 14 days after the warranty ran out. Thank you Whirlpool for nothing! It had a filter on the bottom of the heater that constantly had to be cleaned which was next to impossible. We had to buy a special brush to try to reach it. My husband had to take it apart several times a year and clean it to keep it running. Whirlpool should have replaced it within the first year but instead offered many suggestions about cleaning and etc. so they would not have to replace. Today it is out of my house for good and I would advise anyone reading this to beware! Horrible product!!!

Just like many other reviews about this brand - our microwave went bad after only 14 months of using it. Initially the door sensor would register - it wont operate even if the door is closed. Or it will keep going even if the door is open. I contacted BBB and the Whirlpool corporation regarding this safety issue. I pointed out that the safety mechanism is faulty and they should recall all of those models that have similar issue with door sensor. This is extremely dangerous for households with kids. There is a reason why this safety mechanism is mandatory in all microwaves! Whirlpool pointed out to me that I should not try to operate microwave with open door and refused to take any responsibility. Ive owned probably 10 different microwaves over the years and NEVER had micro go bad after only one year, yet alone have completely faulty safety mechanism. Consumer beware!

Whirlpool Microwave model #GMH5205XVS0 - Same story as many of these other reviews. Similar reviews on Amazon as well. We bought a new house early in 2011 with all Whirlpool appliances. We have gone through 3 magnetrons in 2 yrs. Now Whirlpool wont do anything for us. We will have to buy a new microwave. It just stopped heating all 3 times and the magnetron was replaced. Now it has happened again. Ridiculous. I will never buy a Whirlpool appliance again. This model # should be recalled. Its a lemon and sounds like it could be a danger as well.

Our Whirlpool refrigerator breaks down after two weeks of purchase. I purchased a Whirlpool fridge for my son and his wife as a house and new baby gift. Just two weeks later, the fridge was not cooling and seemed to not be working. The technician was called, and he confirmed that the fridge was not working. We called the shop where the fridge was purchased from and advised they would not refund or replace the fridge.We are now forced to wait for a replacement part that could take up to 2 months to arrive. And there is no guarantee this problem will not reoccur with a new part, as per the technician. I called Whirlpool and lodged a complaint, but that went on deaf and ignorant ears. I am told to call the service repairer. I am sure there is a law to protect Australian consumers.I paid nearly $1,000 for a fridge that is useless! I would like Whirlpool to contact me, and tell me why they shouldnt be accountable for their product. I would like to return the faulty fridge, accept a refund and buy another fridge. My family are living out of an Esky, and this is a ridiculous way to refrigerate food stuff for adults and children in the heat of northern Australia. Whirlpool, I am waiting for your call.

The top of the range stays very hot. Not the burners -- just the top of the stove itself. Now the oven pilot wont light and there doesnt seem to be any sound or smell of gas when I try, though the range works fine.

After a days work Old Grumpy around 7:00 PM drags to sink, fills pan with hot water & soap; starts scrubbing forks, spoons & occasional cereal bowl. I prewash everything placing it in the dishwasher, it takes it a week to reach 3/4 full: use for sanitation.

My family purchased a newly built home from a reputable homebuilder on December 21st 2019. On the first week of January 2020, we noticed that our upgraded Whirlpool dishwasher, model #WDT730PAHZ0 was shutting off mid cycle, resulting in dishes remaining dirty. The technician gave us an estimate of nearly $500 for replacement of pump motor assembly. He also informed us that this particular model is well known for having this defect. We are requesting that Whirlpool stand behind their reputation for producing reliable high quality products by replacing our dishwasher.

We purchased a Whirlpool Cabrio Washer approximately 4 years ago thinking we were purchasing a top-of-the-line washer. The first year went great. I was very impressed with how it washed. My clothes came out cleaner than ever before; I loved it. But shortly after the warranty expired, one of the water pumps began leaking out all over the floor. We found out that a coin had passed through the barrel down into the pump and caused the plastic pump to crack with the high speed spin. We replaced that pump at a cost of over $100. We shopped around to find the part as reasonable as possible. The machine worked fine for about another 10 months, then it happened again. The new pump began spitting out water all over the floor. So again, we found another coin, another crack in the pump and again replaced it, another $100+. Finally, a third time, it was the same thing; the pump cracked due to a coin. This time, it was the pump on the opposite side, but still, water was all over the floor. This time, we ordered the part through Whirlpool and complained about this happening for a third time. My husband asked them about the Lemon Law and he was told that he would have had to purchase all of the pumps through Whirlpool. What does that have to do with it? We bought the pumps where we could afford them! The washer cost about $700 to begin with, and within 4 years, weve spent approx. $400 more? Thats not the end of it though. Now we are hearing loud noises and there is water all over the floor again every time you wash. This time, its not the pumps though. It appears that it has something to do with the bearings and maybe a seal somewhere around the barrel itself. But you can hear something knocking around - it sounds almost like a nut. We are going to call a local repairman to come and look at it tomorrow. This is just ridiculous. I feel like weve been completely duped over this purchase. The salesman talked this up like it was the cream of the crop and weve had nothing but problems. My last washing machine was a Kenmore and it lasted nearly 15 years and not once did I have to call a repairman or buy parts for it! Guess what Im going to buy again? If Whirlpool would just acknowledge these problems and fix them for people, it might renew faith in your company. I know I dont know the inner workings of a washing machine, but it seems to me that a screen prior to the pumps to keep coins from entering the pumps wouldve been a very cheap fix to a huge problem. I also own the Cabrio dryer and have hated it since the day I got it. It never dry things with one cycle. I always have to run it a second time. Knock on wood though, I have never had any breakdowns with that. I can guarantee my next buy will not be Whirlpool, nor will I pick expensive models again. I bought the cheap stuff years ago and it lasted forever! Im very nervous because I bought a Whirlpool fridge last year and I am praying I have no problems with that!

I have owned this Whirlpool Cabrio machine and dryer for almost 5 years. It has been a nightmare. I am forever getting it fix. Now its the notorious LD light, not draining, and it has actually drained, and the company I bought it from does not repair them due to so many problems. Got a plumber to look at it and got it to work.. This is after the company came, charged me 130.00 to tell me they dont repair it. I bought this machine because it was large and I have a big family, energy saver (no, it did not save as much as they claimed) and uses less water. The dryer is wonderful. But the 1900.00 I paid for them was not worth the price. I now have to go up and down my cellar stairs 6 times per wash to stop it, shake the hose, and restart it. A load of laundry takes close to 3 hours due to starting it over. I am gonna buy a Maytag which I use to have and take this to the junkyard. Thanks a ton, Whirlpool and I read all comments and they are ALL true.

Bought a new side-by-side in 7/2020 from Lowes in Keller, Texas. Salesman won me over with the buy American pitch claiming if the need ever arises for parts I would be far better off than with LG which orders their parts from South Korea. I bit, and bought, and now regret. The refrigerator dispenses water randomly and I must keep a glass under the dispenser all the time and empty it when it gets full. Under warranty they say! Well here it is September and after being on hold for an hour each time (6 times as of today) I attempt to get help they tell me that the part W11293378 is not available and will not be made until after this month? BEWARE this brand. This is a poorly ran company and buyers would be better served to look elsewhere.

My washer is nearly 7 yrs. old. It has almost been a full-time spectator sport. Good thing its in the kitchen! Twists sheets so badly - on sheets setting - that it stops and I must undo the balloon its formed and rearrange the wet, heavy 2 sheets and 2 pillow cases. Now, it cant even finish the clean washer cycle without stopping. It seems it doesnt use enough water to do the job of washing items thoroughly. And it balks at heavy loads - which is what we bought this washer to do - blankets, rugs, quilts, etc. Two people, now only one, and two small dogs. I should have at least 10 years of service from that purchase. Repairman says $300+, and he sees it as a very common code. Build them to last or give up. Im disgusted with Whirlpool now.

I bought a new non-frost 14 cubic Whirlpool fridge Model # W4TXNWFWQ in 2013 from PC Richards. The freezer keeps getting busted. It actually produces a lot of frost which stops the entire fridge from running properly. The tech said this is a common problem with Whirlpool. I am lucky to have bought the 3 years warranty. But when I call to fix the problem it always takes them a few days and I have to miss work for this non-sense.

The washer was 5 months old and broke. Three service appointments and multiple phone calls, it still wasn’t fixed. Whirlpool sent rusty parts out to my home and that was the second excuse for not fixing the washer. The poor service guy must have been 70 years old. Hello, how do washer parts get rusty when they are not even used and are kept in a box?

We purchased our appliances including a refrigerator, stove, microwave and a dishwasher from Home Depot and chose Whirlpool because we believed in their quality. We purchased an ice maker for the refrigerator and it did not get delivered so we had to contact the store to get this resolved. Once this was resolved we installed the ice maker and began to use the products. We noticed a leak from the dish washer and checked the connections only to find out the leak was coming from inside the door. We contacted whirlpool to let them know. We were then contacted by whirlpool that they could not find a service center in our area and we needed to find one and they would reimburse us 150.00 for the service center that we find to come look at it and then we need to let whirlpool know what parts were needed and they would send them to us then we could have the service center come back and install the parts.After receiving this information I contacted whirlpool to let them know that this was unacceptable. First of all this is time and money out of my pocket and no service center is going to make two separate service calls for 150.00 dollars. So whirlpool tells me they have done all they can do in which I informed them that they have not done all they can do and they we just dumping this on me to take care of. So after arguing my point, the whirlpool employee decided to call a service center and make an appointment for Jan 09, 2020 which I agreed with and hopefully the problem will be solved. This should have been done from the very beginning instead of wasting my time only to have the whirlpool employees do their job. A customer should not have to deal with this. In the future I will using a different company for my products, not because of the product but because of the service. I have made a copy of this and will be posting my review.

Purchased Whirlpool Washer Mod# WTW57ESV1 12/9/2011. Washers transmission blew on 1/20/2012. Requested Whirlpool replacement. No results. Will never purchase Whirlpool products again.

Owner of 20 apartments, 16 of them have electric water heaters and 4 have natural gas units. Have replaced over the years all 20 water heaters. 19 of them were replaced with Whirlpool units bought at our local Lowes. It is my opinion that they are very unreliable. The tanks rust out in NO time. The electric units last just a little better than the gas units but still terrible. Of the 4 gas units so far I have had to replace 3 of them and the longest one lasted 6 years and 7 months!! One of them was just over 6 years and the other was 9 days away from warranty expiring. They replaced that one. If you have no other choice make sure to buy extended warranty if available. They just dont last!!

Purchased the Sears Oasis (made by Whirlpool) washer and dryer almost 4 years ago and I have worked on these machines more than the Maytag machine and dryer I used for over 22 years. Electronic and mechanical problems. One recurring problem is loose change working its way into the drain pump on the washer and it knocks a hole in the side of the housing. You later discover it when you go down to the basement and find about 50 gallons on water on the floor. Very poor design! Never happened the first time with the Maytag.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

Ive had my Whirlpool Refrigerator for 2 years. Within that 2 year period, all 3 of the drawers within the refrigerator have broken and now there is a crack in the freezer on the bottom starting in the front and going straight back on the bottom to the back and up the back. After pleading my case for a new fridge to their Customer Satisfaction Department and everyones supervisor therein, theyve offered to pay for the epoxy repair. Im very dissatisfied with this! I dont think that a $1300 fridge should be held together by glue after only 2 years. Ive been waiting for one of the drawers to be replaced for over 2 months. They claim that the crisper pan is out-of-stock and they have no information if it is in production. Im to call back in 2 weeks to find out the status of that part. I would like to add that my husband and I work 6 days a week and our adult children are rarely here, so this refrigerator is very lightly used. We dont have a household of 6 or 7 people constantly home, opening the doors and sliding out the drawers. The fridge that I had previously was a GE and it lasted 30 years. I guess the next one will probably be a GE. I just wanted something different. Well I got it. Its something broken.

I love my Whirlpool front loader washer. It is replacing the Maytag Neptune I had for a few years. This Whirlpool has outlasted that Neptune so far by 3 years! So far no issues. I only wish I had purchased the matching dryer at the time.

Whirlpool side by side model WR5571CIDM. Unit rattles EVERY time refrigerator is opened or closed + plus every hour or so spontaneously. Rattle seems to come from the water filter area. Whirlpool serviceman says its normal for this model and calls to Whirlpool customer service say just live with it. Hard to believe Whirlpool considers this acceptable performance in a new model.

I bought this Cabrio Washing Machine just over a year ago and it never drained water when I was doing towels and bed sheets. Life got in the way, and I managed to run smaller loads in the regular settings. Now, the machine is just over a year old and it will not spin unless I put it on the rinse and spin issue. It takes well over 2 hours to wash a load of laundry. From looking at other reviews, this is a big problem. I would not recommend this washer to anyone. It cost a ton of money and was the worst washing machine I have ever used.

Brand new dishwasher never worked. After getting the runaround from Bethel Park Home Depot. I was told I had to call Whirlpool. After being on hold 3 separate times for more than 12 minutes each time, they scheduled a repairman in a weeks time. He said the motor was bad and had to order. Wont be back out until after Christmas. I asked Whirlpool to replace this lemon. Customer service told me they never replace if they can fix. What if something else is wrong? They didnt care. Very rude. Told me manager would tell me the same thing. Never buy Whirlpool. Appliances are faulty and customer service rude. This has been a nightmare experience. Feeling very helpless at this point.

I bought a Whirlpool Duet Washer and Dryer in September 2013 and washer is already broken. It leaks out the front of the front loading door (yes, I clean it as advised, including leaving door open to air dry etc). I am a retired senior citizen and my wife and I spend 6 months of the year in Florida so the washer has barely been used since we are barely home and its not like we are trying to wash load after load of heavily soiled items daily. I would not recommend this product at all!! The repair people said it would cost approximately $300 to fix and offered a plan to fix it for $350 with a 1 year warranty. Why should I bother to do either if I will have to do same after 1 year? This machine is barely used and broke?! The customer service people were not helpful and seemed only interested selling me the repair plan to fix what should not need fixing. So, to recap - I bought the machine in 9/13 then went to Florida from 10/13 to 4/14 (so it was used 1 month). Then, it was used from 4/14 until 10/14 (6 months). I returned from Florida this year in April 2015 and it started leaking in June 2015 (2 months). So, my machine has been used for a grand total of 9 months and it is already broken!!! Stay far away. Whirlpool should come and replace this machine for us for free if they care anything about customer service and senior citizens but clearly they do not. In Florida we have an old Sears Kenmore machine that has lasted for over 20 years!!

My stainless steel french door refrigerators compressor quit working and needed replaced after 3 years and 10 months. I had to buy a replacement kit and it cost 400.00. The repairman cost 175.00. I tried to buy an extended warranty but they do not sell them. You get a 1 year warranty. The repairman told me you will be very lucky if you get 4 years out of the replacement. He said all of the new compressors are really junk. Remember when refrigerators used to last 30 to 40 years. Not anymore. It is a money racket. Do not buy anything Energy Star, it is all junk. I have gone through 5 washing machines in 18 years, and I live here by myself.

The stove is only 5 years old. The oven would not ignite. The gas was getting through, but theres no flame. Sears repaired it and put a complete flame and ignitor piece at a cost for a part of $132.00. I feel the stove is too new to have to replace anything. I am retired, so I do not use the oven often. I have only cleaned the oven one time in five years. It is very clean. I picked this stove out and paid $900.00, because I liked the style and everything about it. I feel you should look into this, and I should not have to pay for repairs in such a short time of ownership. The repair person said this stove already had an upgrade in it. Please respond. Does the whole heating element need replacing or just the ignitor?

Whirlpool WRF989SDAM00. We bought this junk April 22, 2013. 7 visits from service guy throughout the entire year we have had this, problems began almost immediately. Whirlpool gave us a 3 month complimentary warranty (which is up at the end of June). Same problem is back (back left corner freezing up and I think it has also made our ice maker not work nearly as good as it should). We called a few weeks back to report problem yet again, the rep on the phone treated us very poorly. They said they have a new part that is currently on back order that is going to fix the problem once and for all to which my husband replied: I do not have much confidence this will fix the problem as you have sent 5 or 6 new and improved parts over the year and all has failed. He then asked, will you extend the warranty once more, and they said NO. We are stuck with a ($2,700) piece of crap that they just keep trying to find new parts to fix it! On a separate call we asked for a refrigerator replacement to which the rep basically laughed and said that will never happen!! What course of action can we take here?? This company is dead to me!

I bought a Cabrio 2 yrs. ago and I wish I had my old washer back. I read reviews and checked out a lot of literature and thought I was getting a quality machine. What a waste of hard earned money. I cant get clothes clean, its loud, and it leaves soap residue even after an extra rinse. Whirlpool products arent what they claim to be. I had a freezer I bought because I bought a half a steer and it quit running and I lost all my beef - $700.00 worth. From now on I will stay away from any Whirlpool products!!

My Whirlpool microwave broke. Im not sure how or why so today I purchased another 2 actually. Both were too big. The model I purchased is discontinued. I had to remove part of my Marble Backsplash - the turntable is tiny however mic is huge. Work on making microwave for smaller areas. Stick to get or Samsung for a nice size microwave not a Mongo mega oven above your oven.

Whirlpool 2 Cu. Ft. Stainless Steel Over-the-Range Microwave - My wife and I have just remodeled our kitchen and we bought all the Whirlpool appliances, fridge, stove and microwave. We have had them for about 3 weeks now and now the display on the microwave just stop working. I just cant believe this. Its going to be a real pain now to remove this and replace it. Has anybody else had this problem and I wonder if its even covered under its warranty.

We purchased a Whirlpool washer/dryer set 19 months ago and the washer just stopped working. Our trusted fix-it man came out and diagnosed it as a spin bearing problem assuring me it was not anything we had done. He stated it was a defected part or Whirlpool had never put grease in the bearings. A 450.00 part not counting diagnosis and labor. When I called Whirlpool, the first response I got was that they were sorry but we didnt buy the extended warranty, and of course the warranty it had was only a year. I asked to talked to a supervisor and finally she agreed to supply the part, but I was still responsible for the diagnostic and labor fee, which will be a couple of hundreds of dollars! Not happy with Whirlpool and will NEVER buy any product with their name again. Beware consumers!!!

In 2007, I purchased two 30 gal. Whirlpool Flame Lock water heaters (Model: FG1F3030T3NOV) from Lowes for two different homes that I own. I started having trouble with one of them after about two months. I replaced the thermocouple several times, with each one working only about a month. After that, Lowes replaced the complete burner assembly and that, so far, fixed the problem.Now, the second one has (1 Oct 11) gone out. The local Lowes told me that they are out of the burner assembly for this water heater. I called them this evening and was told that they didnt know when they would have the part, but to call back about every other day to see if they had received the burner assembly for this water heater. They said that it could be from two days to two weeks before they may receive this part!In 2008, I also purchased a 40 gal. Whirlpool Flame Lock water heater (Model: BFG1F4034T3NOV) for my house and no problems so far. In 2007, I even recommended that a friend of mine purchase and install one of these in a home that he owned. He did. I helped him install it and it later had the same problems! I am now needing a water heater for my workshop. What can I buy thats dependable?

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

Cabrio washer bought 5 or 6 years ago. Started a whining noise when spinning, so loud we close the washroom door to hear the TV. Called service, they immediately knew that the main bearing was going out & quoted the two parts needed to fix THAT COSTS MORE THAN THE MACHINE DID NEW! Labor was not included. Was also told that it will eventually start leaking. Piece of junk. What happened to simple washers that did a good job washing in half the time that lasted 15 to 20 years???

We purchased this one (Wall Mount Model # WMH76719CS) on July 30, 2015. About one month ago I started noticing that a simple large cup of water to make tea or instant coffee takes more than 2 minutes on power 10 to heat up enough. It used to take about 1 1/2 minutes. Now, Im no mathematician, but I believe thats about 25% power loss in 6 months. The same applied to any convection dinner Ive tried to cook lately. Im going to say that Im dissatisfied with the convection feature and would rather just bake the silly food in the regular oven as usual. Any planned-overs trying to re-heat is taking much longer as well as melting butter. I do not have much confidence in Whirlpool microwaves right now, and may never again.

We bought this washer from Sears with big hope. Within the first year, we had 14 service call covered by the warranty but required 2 to 3 weeks in doing without. Whirlpool replaced the washer at no charge but continued to have various issues over the years. The new one is the control module that Whirlpool knew was faulty but did not let their customers know. The control module went over the weekend but I repaired it myself and do not have any more issues. I literally went in and tightened all of the hardware, removed and install the pulleys, motors pumps and replaced a lot of keep components with better quality. Guess that year the CEO made only 20 million rather than 19 million. Being an American company I was disappointed by the consumer relations people but everything is a throw away nowadays. Will not buy a Maytag or Whirlpool product again. Where has American product pride gone?

I purchased a Whirlpool CABRIO H2Low top load washing machine approximately 12-15 months ago from Lowes in Columbus, GA. I have been very dissatisfied with it from the beginning. I contacted Lowes and discussed the machine and expressed my complaints. I realize that it has a sensor and fills the machine with the amount of water according to the weight of the clothes but have found that regardless of what cycle I place the machine in, it doesnt place over 2 inches of water in the machine. It does not clean the linens, under garments or any type clothes. In fact, it has ruined my designer clothes. It is impossible to get the wrinkles out with an iron. Im very disappointed in the service we have received with this washer.

I purchased my Whirlpool Cabrio in November 2009. I am just four months shy of the two-year mark and it is dead! I paid a lot for the machine because I thought it was worth the investment. It was not mistreated in any way! The problem is in the computer part of the machine.Everyone knows that to have a repair person come out is costly in itself, add to that repairs and parts, and it isnt worth it to fix an appliance most of the time. I will never purchase Whirlpool again. Never. I could have bought three cheap machines for this one Whirlpool, and had a couple of backups in the event that one quit on me! Now I have a fancy washer and a mountain of laundry!Thanks, Whirlpool.

Do not buy anything Whirlpool makes. I purchased a new home and new appliances. In less than 4 years motor is gone in dishwasher. 6 weeks later I have another leak that has ruined my hardwood floors. My fridge is making all sorts of weird noises and alarm is going off. They are coming to ‘look’ tomorrow. And my washing machine is no longer draining. Whichever you buy from check how the extended warranty works... Trail Appliances Calgary uses a company that is horrific to work with, doesnt have a human to talk to and wont acknowledge you unless you pay $149 upfront. RUN AWAY!!!

Bought a new oven for my new kitchen. Two weeks after install, I had to have it repaired. Less than 6 mos. later, it is being repaired again, for the same problem. Whirlpools policy is to fix it till the warranty runs out, then not their problem. Buyer beware, and if you do buy, make sure you get the extended warranty.

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

lD and UL codes are displaying. The UL code displays when the load is even and also displays UL load when I take all clothes out of washer. How could the load be uneven if there are no clothes in? I have had four different issues with this washer. I have started use on this washer in Aug. 2008 and there have been already three major repairs. I am a very dissatisfied customer. I dont know if I should spend more money on washer repairs or just buy a new washer. Please help.

Burners always needed replacing and now do not work anymore - Whirlpool range looks nice, but very expensive to maintain. The burners constantly needed replacing, they do not heat up. I got a repair technician to look at it. He replaced the parts that the burners hook into. Now they do not heat up at all. Well, one of four barely boils water. The oven still works, oh great. The thing is only 7 years old. I have had ovens that lasted 20+ years at my dads house or 15 years at another house I lived in. With all the negative comments and the repair guy who tried to fix it, I think it is time to get the kids Easy-Bake Ovens out of the storage or buy a new range. Obviously, it will not be a Whirlpool. So many negative comments people left, my useless top burners seem mild comparatively.

I bought this to provide A/C to our bedroom during a power outage by use of our Gasoline generator. It is very quiet and provide a very cool air flow. The double vent pipes make it efficient and more than capable of cooling out 15 X 25 foor bedroom. Whirlpool has 28,000 employees in the USA.

I purchased a Whirlpool Ref side by side 11-2013. I have had nothing but trouble. First the Ice maker leaked, was fixed. The door to the ref has had serviced 5 times. The tech after many times trying to fix hinge on door twice was told to order new door. This took 6-8 week to get. Came today 5-27-15 too but new door on. It is still not right, has big gap in the middle - still not level as should be. I have called Customer Service again today with no help. All they want you to do is spend more money on a contract. I THOUGHT WHIRLPOOL WAS SUPPOSED TO BE A GOOD PRODUCT......NOTTA....WILL NEVER BUY THIS PRODUCT AGAIN. SO IF YOU EVER BUY WHIRLPOOL PRODUCT BE SURE TO GET EXTENDED WARRANTY. YOU MIGHT NEED IT..........STILL NOT SATISFIED AND NO HELP IN SIGHT.

I have Whirlpool Washing Machine bought at end of 2012. In 2014, I faced an issue where the washing machine board ics are gone. The services people came and check the replaced a board. It was cost me 6000 Rupees including the service cost. Very next year 2015, again the same issue. Board of the washing machine gone. Now I have to change the board. It seems it may cost more than previous one.I heard that these service engineers are taking the previous my board / replaced board. They are repairing it and sold it again and again so the quality of the board is question mark. As a customer I / we cannot spend money and change board every year. I just want everyone to think twice before you go to Whirlpool Washing Machine & its products. I had a same kind of poor quality issue with even water purifier too. Consequences - I have spent Rs. 10000 already, it is loss for me beside the buying cost of the products.

This is truly a piece of junk! My water heater is 2 1/2 years old and the pilot light will not stay on. Was told that I needed a thermal coupler and paid $30 for shipping. Installed it and still the pilot light will not stay on. Was told again that I needed to replace the main control. Another $30 for shipping. Had that installed and the pilot light stayed on but no hot water. The light was blinking 4x (temperature too hot). WHAT!!? ALL I GOT WAS COLD WATER! Now I was told I need to replace the temperature sensor and they wanted another $30! I told them to I was going to junk it and buy a different brand.

I purchased a Whirlpool Duet front-loading washing machine on September 27, 2010. By October of 2011, it was making a loud grinding noise during any spin cycle. I called for service and was told I needed new bearings which entailed rebuilding the machine. I had purchased a 5-year extended warranty. I was originally told by the warranty company they would replace the machine.After waiting two months, and after several contacts made by me to the retailers customer service, I was told the machine would not be replaced, but repaired. After the repair, on January 6, 2012, the machine now rattles and shakes so much during the final spin cycles. It is literally impossible to have a conversation with someone standing next to you in the same vicinity as the washer, it is that loud. I am sorely disappointed with the Whirlpool line of products and with the retailer who has been dragging their feet on customer satisfaction.

I have received two bad Whirlpool Water Heaters from Lowes. In the course of a few years, I have received two defective heaters (new). One was even a replacement for one several years old that had failed. Lowes insists that you call an 800 number where someone that speaks poor English tells you that you have done something wrong. I am returning the water heater to Lowes, and purchase a water heater elsewhere. This is a perfect example of how sometimes something that is initially cheaper is not the better value.

I owned a Whirlpool water heater and the only thing I have with it is problems! The pilot keeps on turning off. Since I am a 64-year-old lady, I have no idea on how to fix things (widowed). I keep on paying for the plumber to fix it. It started with flooding all my front yard because of a faulty valve. I paid $165.00. After the pilot went off, I paid another bill to fix that. And it turned off and on again (lost count of times). Today, I found another pool of water (the valve again? ). What a piece of work! Please, can you help me? Im heading to the store to buy a new one, not a Whirlpool!

I bought a Whirlpool fridge in June of 2014 and the plastic part of the stainless steel handle that attaches it to the fridge broke about a month or so later. After replacing the fridge because the company said they no longer made the part they gave me a new fridge and with that one the door would not close without leaving a gap of about 1/3rd of an inch open at the hinge side. They took that fridge back and sent me a new fridge. A week later I got in the mail a handle for the first fridge which I no longer had. About a week after that I noticed that the latest and third fridges handle had a crack in the same place. Whirlpool sent me 5 replacement parts and they were all defective with the same crack visible in the replacements. Finally I got a replacement handle that looked good and it broke today, Feb 6th 2016, in the same place as the first one. I should mention that each time the company replaced the fridge it was with a different and better model and each with a slightly different handle. There are other design flaws with the fridge. The door is in a corner and there are cabinets on the wall so the door can only open slightly more than 90 degrees which makes it impossible to open the crisper drawer enough to get a cabbage in it and if I want to clean the crisper drawer I must move and turn the fridge in the kitchen. Also if the crisper drawer is not closed completely it causes the guard rail on the bottom door shelf to fly off sending everything on the bottom shelf to fall to the floor. Fun when some are made of glass and filled with liquid. You would think I would have learned my lesson about this company but no! I went to Lowes and bought a Whirlpool dishwasher and when I saw that the automatic door would not open enough to dispense the soap, powder or packet I called a certified Whirlpool repairman who told me after receiving a duplicate that of course would not work either, that there was no solution to the problem and I went back to Lowes and bought a Samsung and my problems were solved. I WILL NEVER BUY ANOTHER Whirlpool or as I now call it, Whirledpoo, product, EVER.

We purchased a number of Whirlpool appliances (dishwasher, double door refrigerator, Duet stackable washer and dryer). After 14 months, the ice maker broke. $200 later, it was repaired with an upgraded kit.Last week, the washer error coded and the door locked so we could not get out the wet clothes. Called customer (no) service and they advised that we needed to call a service tech because he has a special tool to unlock the door. I stopped by our local appliance store and the counter person told me how to open the door. Had the tech come out for $70 and it could be the lock mechanism or the control panel. It turns out to be the control panel, which costs $250 + labor and would total to around $500, give or take a little. We are in our 60s, my wife does not take in laundry and the ice dispenser was seldom used because I can sneeze ice faster than this can dispense it so I open the freezer door to get my ice.The tech and the store clerk said that these were common problems with these machines. This was a major expense when purchased. So far, the dish washer has not had any problems, but tonight might be the night. The reason we bought Whirlpool is because of the Maytag connection, now that is in the same toilet.

Started researching online about a week ago because my dryer was making an awful noise. Found out that the new idler pulley system the company used in my Whirlpool cabrio washer & dryer model (WED5500XW0) was so ineffective that they have since started replacing it with the old part #691366 they used to use. Also I am having a problem with my washer not spinning all of the water out of the clothes. Found out that this is a common problem with this model (WTW5500XW0).Had a certified repairman out to replace the dryer idler pulley system. He also calibrated the washer to see if that may help (it did not). The repairman said that some of the Whirlpool washers had been recalled and he had actually replaced some control panels and that seemed to work. He suggested that I contact Whirlpool. So I contacted Whirlpool, thinking that they obviously knew that there have been many problems with these machines (idler pulley part being discontinued & and recall on SOME models), and thought they would be more than willing to rectify this problem. Well think again! The two young ladies that I spoke with sounded like robots, Unfortunately, you are not within your 1 year manufacturers warranty so there would be nothing we could do at this time. Although I must tell you, the second young lady I spoke with did offer to sell me a new washer at a deep discounted price of $386 (which is only $86 more than fixing the washer). I think everyone who has a problem should contact Whirlpool and express this dissatisfaction. And if you are shopping for a washer and dryer, stay away from Whirlpool because their customer service is disheartening.

I had purchased fully automatic top loaded WHIRLPOOL WM 360 BW PRO-HS 9.5 on 08/05/2019. I had purchased the above machine after going through the various claims made on the website. However, I regret to say that since installation I find that the performance of the machine is not up to my satisfaction. Even after two visits by the engineer, the following issues remain:(i) The machine makes lot of noise in the initial stage.(ii) Though the timer shows a particular time during selection of a washing cycle, in reality the machine takes one and half times more than the timing shown. In case one selects warm / hot water, the actual time taken is twice that shown or more. I am sure in winters it will take more time in case warm / hot water is selected.(iii) The clothes get badly entangled during wash.In the past I had a LG front loading washing machine which never gave me any problem. I had gone for the best top loading model of Whirlpool hoping for better performance but it has only caused problems. Not worth the expenditure.

Please do not buy a Whirlpool range, they are dangerous. The ovens when they shut down still let gas into the stove. My whole house filled up with gas twice. Whirlpool will not honor the replacing of this stove and give me a replacement. They will repair the range on what they think is wrong but will not put it in writing that it is safe. The fear of using this range after repair is not worth risk I will have to take since Whirlpool does not stand behind their product.

I purchased a washer 6 months ago and it was starting by itself so I called to get a technician out and it took them 3 days to tell me that they did not service in our area. Long story short I was out of a washer for 2 weeks talking back & forth with Whirlpool which was absolutely a nightmare. Kept me on hold forever and hung up on me several times so they didnt have to deal with the situation. Absolutely no customer service at all. When it came down to it they were going to issue me a new washing machine and I had to go to the store to get it and when I got to the store they told me I had a $415.00 credit to spend. Thats less than what I had paid for the washing machine and then I am having to spend an extra $200.00 out of pocket to get another washing machine.My warning to you is not to purchase any Whirlpool appliances unless you want to go thru pure hell. These people do not care about anyone after the product is sold. Their customer service sucks, their appliances suck and Whirlpool just sucks all the way around!! Worst experience I have ever had and I hope they never sell another appliance again!!

My husband and I purchased a Whirlpool Washing Machine & Dryer a year and a half ago. As of current, the machine has stopped working. The machine will turn on but will not agitate. It makes a horrible grinding noise. The type of washer we purchased was a WTW4900BW0. Whirlpool told us we should have purchased the extended warranty. But, I feel we should get more than a year and a half out of a machine that cost $650.

I purchased my Cabrio washer and dryer 4 years ago, my dryer doesnt dry completely, I have to do 2 to 3 cycles to dry. My washer has an f51 code and I have problems unlocking the lid and it takes 2 to 3 hours to wash. This is ridiculous and it causing my electric bill to spike. Is there a recall on the Cabrio?

I would like for the public to be aware of an issue I have had with my Cabrio Whirlpool washer and the extended warranty service that Whirlpool sells to customers. My Cabrio washing machine is less than three years old and is an inferior product. The circuit board has gone out on my washer twice. Each time my washing machine breaks, it is out of service for three weeks and I have a family of four people. My washing machine broke down with a major circuit board failure for the second time in three years on January 23rd. I called the extended warranty department at Whirlpool and they sent an incompetent repairman to fix my washer. We are going into week 3 of listening to various stories on why it is taking three weeks to source getting a part overnighted to fix our washer. This man has ordered the wrong parts, says he cant come to us because of weather, cant get the parts, etc...I just got off of the phone with the warranty service after speaking with a supervisor and they tell me they cannot source another repairman and we still have to wait. My questions to corporate office at Whirlpool is how long do you have to wait to get a washer repaired and what type of product and extended warranty are you selling to the public? A very inferior washing machine and a very unhappy customer! I will never buy another Whirlpool appliance! BUYER BEWARE, THIS COMPANY HAS POOR CUSTOMER SERVICE! THIS IS MY SECOND GO-AROUND AND THE SECOND EXPERIENCE HAS BEEN IDENTICAL TO MY FIRST ONE - TERRIBLE!

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

This is my second water heater in three years. The problem is the thermocouple thermostat. Also, when I drain the water, it comes out of the heater black because of the corrosion in side. I spoke to people in the company, and they were nasty to me. This happened to my two heaters in 2 1/2 years. Please, do not buy a Whirlpool heater.

We bought our Whirlpool Refrigerator a little over three years ago. Within a few months we started having problems with the unit. From ice maker issues, cooling and freezing. Initially the frig was covered under Whirlpools 1 year warranty. Then our extended 3 year warranty kicked in through HH Gregg which they supplied for free because of their poor handling of the initial sale. We have lost track in how many times a repair man has come out to work on the refrigerator. In the last year alone its been at least 8 times. The most recent problem had been the freezer not defrosting properly to the point where we had to store food in our neighbors freezer. The repairman has tried everything he knows and is stumped. Well our extended warranty has run out but theyll continue to work on the problem as long as we report the issue within 30 days which creates a whole different set of issues. The extended warranty states they will replace the refrigerator if it has the same problem 3 times. However what they dont tell you is that if you call BEFORE 3 time period its considered a recall and that doesnt count towards the 3 strike rule. We contacted Whirlpool and they wont cover the refrigerator because the repair company isnt on their approved list. Really a Sears repairman isnt approved? So buyer beware of a lemon Whirlpool Frig! They seem to have a way of not covering their product.

This microwave has crack everywhere and its barely 3 months old. When I want to use it, it makes this weird noise and then it stops. I have not talked to Whirlpool yet, but Ill see what theyll say. My recommendation right now for all those individuals trying to purchase a microwave, dont even look at Whirlpool brand, they just ***.

We purchased our Whirlpool Refrigerator, oven, and microwave a little more than a year ago. Not a single negative event with any of these products and my wife and I wholeheartedly recommend Whirlpool for operation and last ability, unlike the products we replaced them with.

The refrigerator I purchased a week was a dud. Two days ago I received a replacement for a new unit with the same brand and type purchased a week ago from Lowes which never cooled properly (never even froze water into ice), and the coolest it got was 45 to 50%, after three days, with the coldest settings. This replacement works great. Cools like it should. Freezer at 0 and refrigerator cabin at 35 degrees to 40. Lowes was right on top with their service and callbacks - I give them an A for customer service.

Back in the day GE appliances were made to last and last - the only one I have found close is Whirlpool. They have style, dependability and long lasting products. My washer machine has a ton of features and I didnt pay more for any of them.

Another person with problems called this a giant Whirlpool paperweight and he is so right! I received delivery of a Cabrio WTW7800XW3 washer on December 17, 2011. I had an issue (stopped in the middle of the cycle and flashed the letter “F” on the control panel) with it on January 2nd. I called and scheduled service. I had unplugged the machine and a few days later I replugged it and it started to work, so I cancelled the service call. In March, the problem started again. It just adds a little bit of water and then stops. Since then I have had repairmen out 6 times with 8 new parts installed and the washer still doesnt work. Now, the control panel won’t work. Whirlpool refuses to replace the machine. The repairman says these are the worst machines (any of the ones that are top load and have a clear top) he has ever seen and that I should buy an extended warranty. He says the bearings in the tub wear out among other things. On one of the repair visits, the serviceman found a chewed up pair of baby pajama pants. The machine makes a really loud noise like a jet engine taking off whenever it spins and the clothes are not clean. Whirlpool says that the warranty does not cover replacement of a defective machine. I have since researched the machine and have discovered that there have been problems with this line of machine for years. So, why are they still selling them? I am hoping for a class action suit. The company should stand by their products. I will never purchase a Whirlpool (or any other brand manufactured by Whirlpool) product again. I have had the machine for 4 months and it has been usable for about 2 of them.

Whirlpool Cabrio Top Load Washer Model: WTW7800XWO purchased at Lowes 8/26/2010. The lid was broken at the hinge in less than a year and was replaced under factory warranty. Lid falls down and pinches fingers. The second lid broke in the same location in less than a year. Lid falls down and strikes the eye. I’m speaking with repair technicians and researching complaints on this product. It appears to be a design defect that is not being addressed by the manufacturer.

I bought 40 gallon gas water heater in June 2004 and had to have it worked on twice, costing more than I paid for it. I am replacing it now because pilot light will not stay on, and it is currently out of warranty, and I have no faith that simple repair will hold more than 1 year stint. Customer service was attentive but product itself failed to meet expectations.