Purchased a Cabrio Top Loading Washer and Dryer 3 years ago from Lowes and our clothes have NEVER even come close to coming clean without spending a ton on stain removing aids, which only work part time. So I approached the salesperson at Lowes and I was informed (after the fact) that the Cabrio top loaders had poor ratings due to the fact the basket only spun 30 times a minute whereas the front loaders spun 300 times a minute. So after 3 years Im forced to bite the bullet and purchase another washer. Ever since they purchased Maytag, their quality control has gone down the crapper. Now Im going back to the old reliable, the agitator washer. Newer is not better in this case.

This refrigerator was already part of the appliance package that came with the property. I dont think if I had a choice, I would choose this brand. The stainless steel finish has rust spots, the top shelf has cracked and it is less that 5 years old.

This aqua clean is garbage. Had Whirlpool with heat clean perfect. Now have to clean my oven with self cleaning over easy off. I am so disappointed. I always thought of Whirlpool as a good choice. And have bought Whirlpool before. But not after this. Bad, real bad.

There seemed to be an issue with the Whirlpool Cabrio Washer Pump. If a button comes off from your clothing or snap, etc., it gets trapped in the washer pump, causing it to crack and leak. Whirlpool on warranty only allows for one free change and anything after that costs $300.00. This is going to be the third time we are having problems with this and it is becoming, economically, a struggle for us. We have checked every button and snap to make sure they are fastened tightly, as well as any other type of items that may fall off in the wash and become trapped in the pump causing it to crack and leak. These pumps were poorly made and Whirlpool needs to be more aware of this problem rather than telling the customer that they are not aware of the situation.

Purchased a 40 gallon gas water heater from Lowes. Installation was a nightmare trying to get the 3/4 pipe nipple fittings to seal. Once getting the two nipples to seal using extra thick Teflon pipe wrap, found the tank was leaking also. The return with Lowes was painless. Got another Whirlpool to replace, but angry about having to do the job twice. Wish I viewed this site first. Never would have purchased Whirlpool.

Our Whirlpool dryer broke less than 3 months after we bought it. We called Whirlpool and spent more than 2 hours on the phone. They sent someone out and that person told us he couldnt fix the part that was broken. He gave us a phone number to call and we called and spent another hour on the phone after which we were told to call Whirlpool back. We called them on 3 separate days and spent hours on the phone trying to contact real people. After another week (during which time the dryer went out of warranty) we had to call someone to fix it. After that we spend a month calling and emailing Whirlpool to get reimbursed for the almost $400 we spent fixing it. No luck. We were told that it was out of warranty and we didnt use a Whirlpool technician. I was hung up on, given the runaround through phone menus, continually told it wasnt the correct department, and finally that Whirlpool doesnt cover it. Bottom line is...never buy Whirlpool.

This diswasher is streamlined and elegantly desiged for any kitchen. It stays externally clean with easy to wipe surfaces. Easy to use controls on the top of the door that cannot be accidentally hit when walking by the item. Plenty of internal space for lots of dishes. Internal silverware rack is easily removalble and not in the way of dishes. It is extremely quiet when running, like a soft hum in the air. A real "bang for your buck".

I updated appliances in new house, but didnt realize the builder would choose the smaller side by side frigidaire. Could use a larger freezer space, also would like a ice maker that cut off when bucket is full. Overall I love Whirlpool appliances.

It has been a great refrigerator that has lasted for years without repairs. As of today, it is a bit outdated but still functioning. I hope it doesnt break now that I praised it.

Whirlpool Cabrio Elite - I wanted this washer and dryer set to be the best one I ever owned. =( It’s the most I ever spent on a set. I am truly very disappointed. The washer, it is twisting the clothes and sheets so bad. My clothes are falling apart a little bit each time I wash them. I tried so hard to load the washer the way they asked never putting in a full load. The dryer leaves things still wet around the corners and edges. Because everything gets so twisted I had to buy a iron and ironing board just to get the wrinkled out. I hate to iron.

The dishwasher we purchased is a great deal. I love opening up a dishwasher to sparkling clean dishes. The top rack moves up and down and silverware stores easily in the door. Its sooo quiet and easy to use. I love the hidden buttons that dont attract my toddler! Highly recommend!

First the ice maker stopped making ice and then the freezer stopped freezing. The unit is 2 1/2 years old. Whirlpool wants $1800 to repair! No Way. Purchased a Samsung and hope I do better with this one. So little to be praised about this American brand.

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

This piece of junk just broke down not even one year after the purchase. Every singe Whirlpool washing machine has broken one way or another. This one will set the wash time for 57 minutes, and exactly 24 minutes left in the cycler, you hear this big crash and then everything stops. Another dumb thing about this piece of crap is that when the problem happens, the POS keeps the lid locked so that you cant tell what the problem is. What morons would put a lock on the lid? Its not like someones going to take a jacuzzi bath!Restarted the POS again, and exactly 24 minutes left on the wash cycle, there was another crash. Both times, exactly 24 minutes. NEVER BUY FROM WHIRLPOOL!

I have had this front loader for 5 or 6 years. My clothes absolutely stick, I cant stand the smell of them. I have used Affresh, the recommended cleaner 3 days in a row, multiple cycles, no improvement. I did the vinegar treatment, leave the door open etc. What is upsetting is I have read Whirlpool has been aware of the mold and mildew problems of front loaders yet continue to manufacture them. The gasket in the front enclosure pockets at least a cup of water and other gunk from the wash. A waste of money!!!

Refrigerator model # wrs325fdam04 - Refrigerator shelves and drawers are made of flimsy material. Water dispensed is never cold enough - almost at room temperature. Every six months one has to change the water filter cartridge, Filter1 w10295370a, which costs at least $49.99. Cheaper versions that cost 50-60% less, I have purchased and returned 2 different brands, are not compatible with this refrigerator. I do not recommend this refrigerator.

I purchased a Whirlpool dryer about 18 months ago. Within 2 months the timer went out. Of course I am still under the manufacturer warranty they came and fixed it. Now a year after the same problem occur. Whirlpool convinced me to buy and extended warranty for $268.00 and scheduled service with Platinum Factory. Took a day off work, then they call me to cancel the appointment. I will advised people not to buy Whirlpool appliances because that is not the appliance I have with them. All whirlpool appliances have a defect. My refrigerator, my washer and dryer, my microwave all have issues. Most of the whirlpool at all. Services agents are rude and not professional. One agent from Tennessee had the nerve to tell me I have to lose money to get services right. When asked to cancel service plan I was told to write a letter to get my money back. My advice if you are in the process of changing your appliances DO NOT BUY WHIRLPOOL APPLIANCES because your problem will not be resolve by talking to those stupid agents and will not let you talk to a supervisor.

Whirlpool Cabrio - What a nightmare. One year in… from the beginning the washer completes a cycle without attention. It gets stuck in a rinse cycle and eventually stops with an FF error display. Because of this it wastes HUGE quantities of water and takes far too long to actually wash clothes. It is so frustrating. We will buy a new Bosch and THROW this way. We cant even pass it on to our grandchildren.

Whirlpool Cabrio washer - Its been a month now and still the washer is not fixed. The repairman through Lowes warranty service is the worst by far I have ever dealt with. I had new transmission put on, still wont agitate and smells hot. The washer is only 18 months old, well taken care of. This expensive hunk of junk is worthless and the aggravation for all this mess is worse. I called Whirlpool 2 times. The first time, I got a call with the standard oh so sorry bit. Oh boy, that gets the washer fixed. Not. I blasted them and Lowes again. I have had it with this mess. The repairman is supposed to contact Lowes a week ago for replacement. He has done zero. I called Lowes to check. How can they sell this junk to customers who pay for this washer? They know it is junk, Lowes and Whirlpool, so do the right thing and recall the junker for refunds to consumers.

We bought a Whirlpool freezer-bottom 18.5 cu ft. fridge from Lowes. The compressor broke in less than three months of regular use. I called Whirlpool who sent A&E to check it out. The technician didnt even file a report and lied to me about what was wrong with the fridge. They sent a different company to come look at it and they confirmed that the compressor is broken. I called Whirlpool customer service and was told that the warranty only covers repairs not replacement even though I paid over $1,000 for a defective product. The excuse: Its a man-made product so we cant guarantee it! So what used to be a 3-5 year warranty not too long ago is now what? A one-year warranty is virtually useless. I can see a future not too far off where there is no warranty at all. Where is the protection for the buyer? If I wanted to purchase a second-hand fridge, I would have. I will never buy Whirlpool again.

For the last 5 years, 3 Whirlpool dishwashers. For these years been tracking to see how long they will work, but it seem like they are not build to satisfy the customer. Many telephone calls to service, but they will use the same lines, Nothing we can do... your extended warranty expired. From now on will look for a different brand.

In 2008, I purchased the 40-gal. Whirlpool electric water heater to replace the original unit in my home that had lasted 14 years without issue until it died of old age. After about 2 1/5 years, it died and I was given authorization to return it to Lowes at my insistence. Now after another 2 1/5 years, this one has died. So far, I have replaced both elements, lost a days work, missed out on a date because I could not take a shower and now Im told I have to replace the electrical box on top which wont get here until Monday. Its Saturday and I havent been able to take a shower in my home for 5 days now.The first CSR (Crystal) I spoke with implied that since I had 2 consecutive failures, this was a site problem, not a product problem. Theres nothing special about my site, and my old unit made it 14 years with zero repairs. I would argue that since both of the units only lasted 2 1/5 years, that the product is substandard. I asked to speak to a manager but was told no because they were all busy (no doubt) and her demeanor was unapologetic and unsympathetic. The second CSR (Nick) I spoke with was very nice and at least sympathetic. That goes a long way in customer service, but I was still not allowed to speak with a manager.I am going to try and repair it one more time, but I have zero confidence in Whirlpool and would never buy another Whirlpool product of any sort again. If I get it working, and after all Ive read here I doubt that I will, I will only be using it for the time it takes to get a replacement of another brand. This was my first experience with a Whirlpool product and you can be sure it will absolutely be my last.

The stainless steel refrigerator door is rusting after only 5 months and the company respond it is cosmetic and we the customer have to live with it.... They will send a cleaning product which didnt remove the rust. Review that was written on the company facebook page wasnt published because it didnt meet the company website guideline. Its disappointing and frustrating to realize that we have to go through it. Not happy with customer service.

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

My brand new Whirlpool washing machine has been nothing but trouble from the day we first used it. We are now reaching out to try to contact the warranty department. Weve tried email and phone both and are having ZERO luck even getting a human to talk to about the problems. No response. Took forever to even find what we thought was accurate contact info. Lowes doesnt stand behind it. Now Whirlpool has a crap warranty department. We were warned and should have never bought it to start with. It is a total waste of money.

I have purchased one refrigerator double door Mastermind 230 Ltr. capacity on 08/02/2009 at a price of Rs17200 from Himanshu Sales at Halol, Panchmahal, Gujarat. After one year, there was a problem in the refrigerator. My complaint was given to Himanshu Sales Halol. A service engineer came and replaced OLR and starting relay. I was charged Rs500. The bill was not given. Again cooling was not achieved. My complaint was given to customer car complain no. 22265 on 26/04/2011. Service engineer came on 10/05/2011 and reported that compressor get overheated. He has replaced compressor, capillary, gas, starting and overload relay and charged Rs1650. But compressor continued on, it does not cut off on temperature. I complained on 22/05/2011. Again service engineer came and replaced thermostat and charged Rs150. On 02/06/2011,again cooling was not proper. I complained on 05/06/2011. Service engineer came and advice to send the refrigerator to service center at Halol at our cost. After one week, it was sent back to me. Still ice not forming in freezer. We thought that it is due to summer. We also informed Himanshu Sales Halol. They advice to give complaint to customer care. Complaint was given on 28/11/2011. On 29/11/2011, a service engineer came and informed us that the compressor overheated. On 06/12/2011, the service engineer came with new compressor. He replaced the compressor, capillary, starting and overload. After gas charging, fridge was started. Still ice was not forming in the freezer and there was abnormal sound coming from compressor.Now we are tired to take service from Whirpool. I think this is a company defected piece, so send some senior authority to check the same and to take necessary action. Also due to this problem, my electricity bill got on higher side, and the purpose of the appliance is not solving. On 12/12/2011 at 11:30, the service engineer came and put some instrument to measure temperature at freeze on super cool mode and told that he and Samir will come to check the same. After that, compressor was in running mode up to 19:30 without cut off on temperature. Nobody has came to check,we called him. He replied that Mr. **, the regional head, will come tomorrow, 13/12/11. Still cooling is not achieved, We have registered complaint under complain no. AH1211007719 dated 13/12/2011.

After the pilot light on my water heater would no longer stay lit, I contacted the Whirlpool technical support number listed on the unit only to be told my unit was still under warranty, but I would be responsible to pay a $65 diagnostic fee and any labor associated with a repair. The technician came and said my ventilation system was the problem and didnt even touch the unit. He then sent a report to Whirlpool that the unit was flooded which voided my warranty. He did not submit photos to substantiate his water damage claim and now Im being told the unit is unsafe and must be replaced at my expense. This all sounds like collusion to not honor the warranty! I will never purchase a Whirlpool product again!

My stove has met all my baking and cooking needs. Love the self cleaning oven and I mean it does clean every bit. Always bakes at right temperature. I love it. All my pies and cakes come out perfect and the look of it is just pretty and matches my kitchen.

We bought model WRS571CID*** which has an in-door ice maker that has stopped working after exactly 3 years. An excellent authorized service rep advised that the wire harness from the freezer to the door was damaged by chafing from normal opening and closing the freezer door, which has caused the ice maker wires to break, thereby disabling the ice maker. The only remedy is replacing entire the door, which would cost $1700 according to Whirlpools published repair data, which he is obligated to charge. Apparently, the wiring harness is not a replaceable part, because I suspect the labor hours needed to disassemble and reassemble the door is prohibitive. Well, a new fridge costs about the repair. I spoke to the Whirlpool company about whether they acknowledge that the design is faulty and that the door should be replaced at their expense even out of warranty, and they declined.So I advise prospective buyers to be aware of this issue and watch other reviews. There are many customer reviews on various sites complaining about this very issue. Our workaround is to put ice trays into the freezer to make ice, and while the dispenser still works, pour the ice thus made into the ice dispenser manually - until the wire control that also becomes damaged and stops working. I would not recommend buying this model.

Worst appliance we have ever bought. Our last fridge (also stainless french door) we had for about 14 or 15 years and only the door bins cracked that we put gallon milk jugs in (dont do it - they are too heavy and get warm from the door opening). This fridge is a piece of junk. We were told it was stainless - rust spots started appearing the first year. The deli drawer lid broke within a month or two, but I didnt care about that so I just threw it away. The ice machine stopped working a little after the first year. Today however is what got me to write a review - I spent a couple of hours trying to duct tape and make wood supports to hold up the frame for the produce drawers - one of which is totally cracked when it fell from having the support break. While doing this I noticed there are hairline cracks on the front of all 4 of the shelves! Also, this one has a wire basket in the bottom instead of a full drawer - probably more supportive, but it means stuff constantly falls into the bottom of the fridge and it is extremely hard to get in there to clean.

The washer began to start making noises as if coins were in it or plastic breaking every time I wash. Also, it does not wring clothes out good and clean well. I have Whirlpool Cabrio.

They sold me a washer that did not work. First load failed and the machine locked closed. Error E1 F9. Took 7 days for technicians to open the machine. The laundry was rancid by then. Needed a new drain pump motor, which was installed 37 days later. Whirlpool offered $150 for my loss of clothing. Ridiculous. Value $900, I asked for $500. Awful.

March 1, 2016 I purchased a new Whirlpool dishwasher model WDF320PADW2. After just over 1 year of use, the unit quit. The pump only runs in the empty direction. It quit in the wash direction. Hums and smokes. This is not acceptable for a appliance to last just one month past warranty then totally quit.

Whirlpool Cabrio - 6 Big Problems: I dont write bad reviews on anything but in this case, I feel I have to warn potential buyers. Ive owned this washer for more than 4 years. Here are the problems: 1) This washer TEARS HOLES in my towels; 2) It SHREDS some clothes; 3) Loads are UNBALANCED every time I use it, regardless of load type or size; 4) Very LOUD when running. My neighbors can hear it and they are 150 feet behind us. It sounds like someone is pounding on the walls of my house. BOOM! BOOM! BOOM! I havent seen it, but I believe it might actually be jumping off the floor; 5) Its NOT High Capacity as advertised. Sure, the drum is big, but you cant put much more than a tiny load in it. If you try a larger load, the clothes dont get cleaned; and 6) Whirlpool wont do a darn thing about it. They dont care about the buyer or their own reputation.Our family grew and I thought we needed a larger washer. I foolishly replaced a ten-year old, $300 standard top-loading GE washer that never had a problem, with this expensive **. The GE had a drum that was about 1/2 the size and it washed MORE clothes! The GE never damaged any clothes and it wasnt ridiculously loud like this one. I regret ever buying this expensive washer and I will never again buy a Whirlpool product.

I would not buy any Honeywell electronic water heater thermostat. Has failed two times. I have to pay for a new one to be mailed and for repair. A bad product from all the reviews. Honeywell is claiming they do not service it anymore and gave me a Sears telephone number. Servicemen have said it is a crap product and fails all the time.

I purchased a whirlpool duet washer & dryer several years ago. In the 3rd yr or so, the dryer kept shutting off with beeps prior to clothes dried or cycle completion. Whirlpool gave me an option for an extended warranty given that the orig one had long ended. I purchased it - a one year warranty. In that year I have had technicians to my house 6-7 times to diagnose or swap parts. They eventually swapped all 3 boards on the dryer. It still shuts down before clothes are dry. Whirlpool tells me that they outsource this service and take no responsibility for either their lemon of a machine nor their lemon service company; Alliance Repair. I would like the money back for the extended warranty so that I could buy a new dryer and all I get is a runaround from both the service company and whirlpool. I will never buy whirlpool again and advise anyone out there to also not buy their machines.

Bought at Lowes. Washer was horribly out of balance on first use. Called warranty # to get service. Was made appointment by Whirlpool for next day. Too good to be true I thought and I was right. A week later, repair company called to make their own appt, chuckled and said Whirlpool does NOT make appointments for them. They came out to see washer and at the time of appointment, the guy said sometimes they come from the factory not hooked up right inside and after he went back to a lady in the office, Jonnys Appl Repair, Bozeman, MT said they would not fix it because washer was not sitting on a concrete floor. They are idiots. Finally, washer completely broke 7 months later. There was no service that would honor ANY appointment Whirlpool made. Went through 6 repair companies trying to get a close appointment date. Hopefully next week will be the magic repair. GO WITH SEARS. Repair is directly through them and they show up when they say they will. Ive never had a new product not working right when purchased at Sears.

I bought the Whirlpool bottom mount freezer to find out there were problems with the drainage. I contacted whirlpool and they sent the parts to fix it but they did not send a repairman. I’m 80 years old and I’m not getting on the floor to fix this issue besides pulling it out to get behind it. The ice will buildup in the freezer so I have to empty the freezer and break up the ice. If I don’t break up the ice it will frost over. I will never buy another whirlpool refrigerator and I’ve been looking at replacing this one.

Whirlpool Energy Smart Residential Electric Water Heater - On top of this water heater is a junction box. If it goes out, so does the water heater. I am on my fourth junction box, at my expense on three of them plus the electricians bill times two. They finally sent me one free!

We purchased a new Whirlpool water heater April 2013 at Lowes and every 3-4 months the pilot would go out. My husband would simply re-light the heater, I guess he didnt think it was a big deal. However, in September 2014 the water heaters pilot went out and would not re-light, so I contacted Whirlpool about the warranty. It took 4 telephone calls (two of which involved a plumber, per Whirlpools request), and several days of cold showers for an authorization code to purchase a $8 part (thermo coupler). The hassles that Whirlpool put me through, no one should have to endure. Who ever heard of a technician telling you that they have to talk to the plumber, when you call them to explain a problem with your water heater, such as, the pilot will not stay lit and the plumber said it is the coupler (I couldnt remember the whole name of the part, but surely they should have understood what was wrong). Secondly, providing a plumber (unless youre married to one) to converse with them involves more money. Now I have a plumber at my house so I call Whirlpool and this technician insists that the plumber perform a test on thermo coupler to make sure that it was faulty before she gave the authorization for a new one. Yet again, when I called to Whirlpool with the plumber, while I was voicing my problems in resolving the issue of my water heater with this technician, and she just hung-up on me. So as not to be defeated and having already invested in the expense of the plumber, I called Whirlpool again and requested a manager. The technician asked if she could help and I informed her of my previous encounters. She apologized and took my information to have a manager to call me later; however, she did give me the authorization code for the thermo coupler without delay. When I went to purchase the part, I didnt have the old part (as trade; the plumber hadnt removed it), so I paid for it out-of pocket, to return the old part later.

I bought a Whirlpool fridge in 2014 and started having problems a year later. It was making really loud noises and the fridge part wasnt working. All the food was warm. Of course there is no warranty on it after one year. I called a repairman and he said that the doors dont seal properly so the warm air is getting in causing condensation which freezes the engine/fan which is the cause of the loud noise. The reason why the upper fridge is warm is because the fan pushes the cold air up from the freezer, which of course wasnt working. Then I noticed that the frame at the bottom of the fridge is bending causing the freezer not to seal properly which would be the reason for warm air getting inside the fridge.

We get the error code F1 in the start of the cycle and when there is 21 minutes left, we have to stop and reset at least 7 times before the water fills. We put a new sensor in for over $200. The second problem is it goes off balance no matter what the load is. I was going to have it fixed (if possible). After reading all the above I wont waste any more money on it and go buy an old fashioned reliable washer. What a piece of money sucking machine especially when I dont have any extra money to waste down the drain. I wish I knew before. There are a lot of people this time of year I would have rather given the money for a needy cause. How disappointed we are with Whirlpool!

If I could give Whirlpool products and their customer service zero stars, I would! We built our beautiful home that was complete in June 2015. Our builder was installing Whirlpool products in the homes he was building at the time. So we decided to accept the microwave, dishwasher and drop in gas range that he offered. We had never had Whirlpool kitchen appliances and no reason to respectfully decline the brand. We bought a french door Whirlpool refrigerator as well so the handles would match our open concept kitchen.In addition to the poor quality overall, the microwave makes a terrible buzzing noise that has been fixed two times thus far. The refrigerator is so loud at times that its difficult to hear the television when sitting in the living room. The dishwasher does not dry the dishes on any setting to include heat dry hours and hours after the cycle is complete. This forces us to hand dry our dishes prior to putting them in the cupboard. The cast-iron grates on the drop in range already look terrible because the enamel is coming off. I clean all the appliances as recommended by Whirlpool and like to keep our home beautiful because it is our place of solace and comfort. As stated prior, our kitchen and living room are open concept so I now have to contend with an eyesore in the middle of our homes hub because Whirlpool considers this manufacturing flaw as cosmetic and wont cover it under warranty.To add insult to injury, these poor quality products are the higher end available from Whirlpool. We plan to wait for the year end warranty to expire and replace the four appliances with a brand that has always offered excellent customer service and has been very reliable and trustworthy for us. As a consumer, I would save yourselves the agony of purchasing any Whirlpool appliances!!!

Great washing machine. I have been using for over 2 years and this washing machine has NEVER failed me. Clothes from extreme filth to sensitive material always come out clean, not damage, and smelling great. I would highly recommend Whirlpool washing and drying machines to anyone!!

I always appreciated Whirlpool’s quality, but this brand new stove in my brand new home is a disappointment. The top, back (control panel) gets extremely hot when the oven is in use. The burners are not as easy to regulate, and the broiler (which is under the stove, a negative for me) didn’t come with a broiler pan. That was an additional cost. I had service out in the first 60 days because the oven wasn’t heating properly.

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

We bought our Whirlpool Cabrio washing machine and dryer in May and it was the worst purchase we have ever made. We have had a technician out to our home three times. Whirlpool said that the next time the technician comes out to your house, you will have to pay for it and we have the extended warranty! The problems with the washing machine are many. 1. Leaves white streaks on dark clothes. 2. Not enough water covers the clothes, so clothes do not get clean. 3. The spin cycle is so violent that clothes are damaged. 4. The soak cycle is a joke. Soaking means to sit in water and soak. This machine drains the water so there is no soaking.5. With this very expensive machine, we can use only one cycle; bulky items on the low spin with a repeat rinse.The dryer is equally terrible. As I write this, I have two pairs of jeans going through the dryer for the third time. According to the technician, a heat sensor determines whether the clothes are dry. We have not had one load of laundry, big or small, that has dried in one cycle. But the technician said that this is how this machine works. We have tried all the cycles. According to Customer Service, the technicians found nothing wrong with the machines hence, we will have to pay for the next repair call. If you are looking at this machine and dryer, dont! Do not waste your money or your time. Washing laundry is a nightmare because the machines do not do what they are supposed to do --wash and dry the clothes.

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

Cabrio Washer - We were getting unbalanced load messages and the washer would stop. I called in a serviceman and he said it wasnt worth fixing. It would be cheaper to buy a new one. This washer is only 5 years old.

My 3 year old Whirlpool dishwasher (model GU3200XTXY3), broke down for the third time. Under extended warranty with my insurance company, a repair tech was sent out to diagnose the problem. He quickly found that the heater had been continuously running (not just during drying), which caused the machine to quit working. He also found that all the wiring inside the dishwasher was spliced together, those two things=fire hazard! Because the heater was always running, it was super heating all the water used to clean the dishes. The vent to release the steam is located on the top of the door (right under counter edge). The dishwasher was producing hotter and more steam which slowly ate away at the particle board under the cabinets. No, we dont have the most expensive countertops, but Whirlpool should be held responsible for producing a faulty product with a faulty design. I have contacted Whirlpool and they claim to have mailed a claim form 3 weeks ago. I have not received it. Posted on social media about it, and was told I must only speak with the person who sent me the form. I would love to, but since I havent actually received any contact from anyone (other than a fb post) I dont know who to contact, at what number, or email!

I had my Whirlpool Quiet Partner 11 Portable Dishwasher for less than a year when it started leaving dirt, food particles, and white cloudy film on my glasses and dishes in the top basket. It got so bad that we started to wash the dishes twice but it would not clean the dishes. We called a repairman out to see what the problem could be. He checked everything and told us nothing was wrong with the dishwasher and to clean it with CLR. We cleaned it with CLR twice and the dishes looked better with the first wash. The next wash was the same with leaving grit and dried food particles on the glasses. I am now washing my dishes by hand if I want to clean dishes. Can anyone tell me what is wrong with my dishwasher? I am ready to buy a new one but not a Whirlpool.

I have been extremely dissatisfied with the Whirlpool Cabrio washing machine!!! I tried to take it back and Lowes would not let me return it because I had had it for 6 months. It doesnt put enough water in the machine to get all of the clothes wet. It doesnt get the clothes clean and it leaves some kind of lint residue all over dark clothes. I am only able to put in 1/4 of the clothes I put in my Maytag washer which I loved, but it wore out. I am also short and it is so deep I have to use a stool to get up on to reach into so i can reach the bottom of the machine. Even though it is a huge tub, I can only put a few pieces of clothes in it to get it to clean the clothes. It is a very poor design and needs to be recalled!

My story begins in August of this year when my wife and I built a new home. The builder provided Whirlpool appliances in the kitchen. The fridge has continually tripped the breaker and after numerous visits from the builders electrician, we finally also had the Whirlpool service technician check out the fridge too. After the control board was replaced, and the interior light housing was replaced, it turns out the wiring harness in the fridge is faulty and is not repairable. According to your customer service team, the fridge will need to be exchanged. I have made numerous calls to the suggested numbers (866-698-2538 & 800-253-1301) to find out the status of the exchange. Each time, I have been told that my file is with the review team, and that if I have not heard from them in the next three or four days, that I should call back again. I have not been able to contact the review team directly myself, as your customer service team is either unable to or is not allowed to share those contact details. So I am relegated to wait and then call back again. I have lost track of the number of calls I have made, and the hours spent on hold because of the high volume of calls or re-telling the whole story. The fridge was determined to not be repairable on November 19th. I am not sure if this is the treatment you intend for your customers, or if this is an anomaly.

A factory authorized technician came out this morning and repaired the washing machine. The bolt had come off of the pulley, which then fell off and burned through the guard, and then burned into the insulating on the bottom. The technician said this happens frequently. All that needs to happen is to have a Loctite bolt holding the pulley rather than a plain bolt which comes loose with the vibration. All Whirlpool had to do was spend a couple cents more for the proper part which would avoid potential fire! I should not have needed to have had my home put at risk, needed this service call or pay all that extra money because of their poor workmanship and design failure. This should be a recall item, and all costs incurred by the consumer should be covered by Whirlpool.

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

I have had Whirlpool appliances for a very long time. However, I am extremely dissatisfied with the purchase of my last Whirlpool washer a couple of years ago. The washer is extremely noisy, to begin with, and I complained to hhgregg about this. They delivered a couple of other machines, all of which were very noisy. The latest problem with this machine has been with the tearing my clothes. My clothing gets caught under the agitator and the items tear. This is a poorly designed washer and I wish I had never purchased it. I was thinking and wrongly so, that the washer would be as good as my previous washers. Well, I was so very wrong.I wish to know what you are going to do for me with this problem which is so very annoying and costly.Marjorie **

Im very satisfied with the looks and performance of my Whirlpool dishwasher, it is quiet enough that I put it on to wash before going to bed. It is that quiet. Im not happy about the way it was installed, but that is no fault of the dishwasher or Whirlpool, it works great even though it sits kind of crooked in the cabinet. The dishes are always sparkling clean and dry when it is done washing.

Two months ago, I bought a Whirlpool duet washer and the computer went out, two days after the warranty was up. It went bad that I disconnected the detergent mechanism, which made it work, for now.

I have a Whirlpool refrigerator model number wrx735sdhz and its been a lemon since I bought it. The ice machine totally backs up and the Chute overflows and Im always scooping ice out. Had another technician out today. He saw my frozen sour cream download Frozen pickles and everything else Frozen. Then because I had to have the ice maker replaced in March and it did nothing for the unit he reports back to A Plus Appliance that theres nothing to be done and he says his diagnostic tests come back that it is fine. Im going to post a very negative review about them. Lowes told me that if he would have reported differently they would have given me a voucher and refunded my money. So have another Appliance repairman come in tomorrow.I bought the extended warranty and so far its gotten me nowhere. As many times as Ive had to unclog it and throw away food I could have had technicians out here hundreds of times for this defective refrigerator. Plus on the two service calls I had they said that there has been numerous complaints about this model and the ice maker and freezing over. I have thrown thousands of dollars of food away over the last 2 years. Lowes extended warranty has got me nowhere.

Cabrio washer bought 5 or 6 years ago. Started a whining noise when spinning, so loud we close the washroom door to hear the TV. Called service, they immediately knew that the main bearing was going out & quoted the two parts needed to fix THAT COSTS MORE THAN THE MACHINE DID NEW! Labor was not included. Was also told that it will eventually start leaking. Piece of junk. What happened to simple washers that did a good job washing in half the time that lasted 15 to 20 years???

I purchased a Whirlpool Cabrio washer (WTW6500WW1) on 9/11/09 for approximately $800. Now three years later, it needs a new rotor and stator costing $470 in parts and labor. I called Whirlpool and was told I could get no help with the cost of parts because of the age of the machine! A simple Google search of the F51 error code that I am getting will show you that these machines are $800 pieces of junk! I am not repairing this machine. I am going to run it until it dies and simply buy a new washer. You can bet your sweet self it will not be a Whirlpool! I can only hope to inform enough buyers about this to keep them from the same fate.

We purchased an Estate Washer for my 89-year-old mother in 2008. The paint has been peeling down to bare metal on the left top quarter from the corner down to the lid hinge for the past 2 years. I contacted customer service and was given probable causes, one of which was the washer might have gotten dusty! He said that could cause chipping. I reminded him the problem is peeling chunks, no chips, layers of paint. The warranty expired of course. The solution he offered was for me to buy paint from Whirlpool or Lowe’s, and paint it. I have had a Kenmore washer for 24 years. The paint is perfect, and it still runs great. I would never buy another Whirlpool product. The quality is atrocious.

Why does your AquaLift self-clean feature not work? Tried numerous times & have been scrubbing all afternoon... Horrible!!! My last oven (Maytag) self-cleaning feature worked awesome, just had to vacuum out ashes & wipe down with regular soap & water. Have no idea what to do to get this oven cleaned!!! Very frustrated...

My silverware, when it is washed, a piece or two comes through one of the openings in the basket and I have to work it out before I can lift it out of the dishwasher (MOD WDP320PAD50 Serial #F4432749) to put the pieces away. Please update your dishwasher by making the openings smaller for the silverware so I can stop cussing. Send me a new basket when you do. The dishwasher was in a new home I bought.

This is the worst product (Whirlpool Cabrio Washer) I have ever purchased. I paid $999 for it new. I had to have it repaired at the cost of $500 at just two years old. My sister bought and had the exact same repair needed. I used to trust Whirlpool but not anymore. I wont buy Maytag either since it is a Whirlpool product as well.

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

They attempted to fix our fridge, 1 year into owning, claimed no parts available. Never fixed, fridge died. Refused to repair. Offered us a 15% Visa gift card on another Whirlpool. Unacceptable, they can’t fix their product, and will never recommend anybody go through my familys $3,500 wasted fridge experience. Don’t trust them, they lie, and just escalate it to another liar in the customer service department.

Whirlpool Gold Fridge Model GR2SHWXP002 purchased on August 15, 2007 for $1,368.77. Only repair issue so far was water leaking from the Water Inlet Valve Item # 949403. I bought a new part on Aug 8, 2011 for $73.45 and replaced it myself. The plastics on the fridge door have yellowed. No smoking in the house so not sure why the plastic has changed colour??? Would I buy one again?? Yes I love the water through the door feature and the automatic ice maker. 10 years old now and no major problems.

We had an old Whirlpool dishwasher that worked great for over 20 years. It had the ole tried and true knobs in front. We replaced it with another Whirlpool when we updated the kitchen. That one had the new electronic panel in front, it lasted 6 years then we had all kinds of problems and finally replaced it with a Bosch, also with a electronic control panel. We have had this one 4 years and it is not working at all. Wont start and keep a cycle on. Spent $500 on it and its a piece of crap. Thousands of complaints on the internet for these new types of dishwashers. The electronic controls panel are faulty, and probably get wet from repeated use. Go back to the knobs. They worked for years and years!

Whirlpool Cabrio Washer - Owned this appliance for a couple of years and we are constantly receiving UL and F 51 codes on display. Washer stops spin mode after washer shakes violently.

August 26th 2014 purchased a NG (NO GOOD actually natural gas) Whirlpool water heater from Lowes. Model No. N40561-403. Installed it and everything was fine until this morning August 29th 2014. The indicator light was out and so was the pilot. Tried to light it without success. Called Whirlpool and they are sending me a new controller that now needs to be installed. Called Lowes and they will not take it back. Wish I would have found this site prior to this costly fiasco. Waiting on part now and I will keep you informed as to my progress. I have a feeling this is going to be 2 days wasted and $367.00.

This Whirlpool Water heater was purchased through Lowes on March 29, 2011. This past weekend, water started leaking out of the thermostat/natural gas control located on the side of the tank. I called a plumber to take a look. He stated that a new thermostat/natural gas control was needed. Although the tank has a 12 year warranty, this item does not. Whirlpool did agree to replace the part but would charge me $30 to overnight the item which still would have taken 4 days because of a weekend. To install the item would have cost me almost $500.00.To purchase a new Rheem Water heater was $999. I chose the second choice as the first choice would have still left me with a subpar water heater obviously already out of warranty. The reason for my review is that I saw the number of complaints on the failure of this part. When I purchased this water heater, it was the better model due to the 12 year tank warranty. What use is the tank warranty when the other items dont last? There should be some type of reimbursement but Im not holding my breath. Please buy a contractor grade water heater and not the cheaper models.

I cannot adequately express my dissatisfaction with the Cabrio washer and dryer that I purchased couple years ago. I will never buy a Whirlpool product again. That includes Maytag; Kenmore; or Amana products. I have had nothing but problems from the start. The washer sounds like jet engine taking off in the spin cycle. I found out the washer needs new tub bearings ~ $200. The washer is tearing up towels during the wash cycle not sure what the cause is.My washer will only wash clothes in certain cycles (bulk). I keep getting error codes in normal or other cycles. The washer takes long time to fill so it times out during fill cycle. I replaced fill lines and checked for blockage, everything was clear. The washer probably needs either new motherboard or water inlet valve. Not sure which, maybe both? It is impossible to wash a load of clothes without getting the UL unbalanced load indicator. I also have problems balancing the load. I have taken wet clothes out and put them back in with no luck. It takes hours for a load to finally wash.The dryer has had its problems. I just replaced the belt tensioner on the dryer because it was making a terrible screeching sound. The noise was very annoying. I am very disappointed with quality of Whirlpool products. However, don’t worry about improving customer relations because I will never buy a Whirlpool product again. P. S. How come you have not issued product recall? There are 1,000s of similar complaints concerning the Cabrio washer. Frustrated customer.

Microwave has melted a hole on the inside rectangular plastic cover. Model number is on recall list but not serial number. Opened microwave to find melted plastic on my popcorn bag that was dripping from the plastic up top. I will replace microwave but not with a Whirlpool again.

I purchased a side-by-side Whirlpool fridge and the ice maker stopped working 2 weeks after I purchased it. The retailer said that I would have to go through Whirlpool to resolve the matter. This has gone on for almost six months now. Ive had two service companies do 7 service calls to fix the problem and today, the 8th service call was supposed to happen and the guy never showed up. The company has lied to me telling me that it will just be one more service call each and every time.I want my refrigerator exchanged for a new one. They are refusing to do so until each service call is completed. I think they sold me a lemon based on the fact that nobody seems to be able to fix the issue. I cant seem to get anywhere with Whirlpool at this point and dont feel that I should have to keep a product that never worked from the start. Help! Is there some kind of lemon law on appliances?

Purchased a GGE388LXS04 electric range in June of 2013 from Lowes. In September 2013 one of the top burners went out, under warranty Whirlpool repaired the burner. Now after attempting to use the self cleaning mode for the oven, the ovens (top and bottom) along with warmer device do not work at all. This issue is evidently a major issue with Whirlpools electric ovens. Will call Whirlpool tomorrow as the oven is still under warranty, will also call Lowes and see if they will replace the oven with an oven with a comparable brand. Wish I had read this site before we purchased this oven. A very bad experience.

I call in to Customer Service to get someone to fix my washing machine because it wasnt working and when I called, I forgot to have my washing machine serial number at hand. The person on the other side told me that she cant wait for me to get the serial number more than 2 minutes and I ask myself, if they cant wait for me more than 2 minutes to get my serial number, then why should I wait a week to have someone fix my washing machine?

I posted about our problem with the Whirlpool water heater on the 20th. Chris ** of Whirlpool called me back. He totally took care of the problem and got us back working. After 3 years, our problem is resolved. I am grateful to Chris for finally resolving the problem. He was professional, courteous and knowledgeable. Thank you.

The washer constantly binds clothes around agitator. Truly a design flaw and it does not get clothes clean. So with a washer like this, I am forced to go to laundromat. Wished I would have paid 230.00 or so to have transmission fixed on old Kenmore. Truly dislike this substandard appliance.

I purchased this machine in April 2011. Adequate performance until this past fall. It did not drain properly and began to smell, then stopped working. I called a local certified repairman who discovered an item of clothing trapped beneath the basket blocking the drain pump. $109.00. Less than 2 months later it happened again. The repairman returned and again found a blocked drive shaft under the basket. $109.00. When it happened a third time I called the Whirlpool repair line. A serviceman was sent out and immediately knew what the problem was (prior experience). He removed the basket and once again there was an article of clothing under the basket, blocking the drain pump - $129.00. At this moment it is beginning to smell again. I spent 40 minutes on the phone this morning with Sears and Whirlpool. No help whatsoever. This machine is not even 3 years old. I never overload it and clean it regularly. I bought the washer and dryer as a set because they are quite visible in my home. I have had Whirlpool products for over 40 years and never had a problem. I need someone to stand behind this machine.

I have bought and used other dishwashers (different brands). They lacked quality, quiet operation and efficiently and effectively cleaning dishes, pots and silverware! My Whirlpool dishwasher is far better than all of them. It cleans and makes my dishes sparkle. I would not buy anything but Whirlpool in the future.

Purchased this Upright freezer model 160NZTQ02 approximately 2 years ago. Freezer had problems maintaining temperature from the beginning. Noticed it freezing up at air vents in back of interior. Unplugged, removed contents, and let defrost by ambient temperature (approximately 4 hours). After using this method for first three defrost periods (approximately two weeks apart) I began defrosted with hair dryer, then moved on to heat gun. Bottom line is this junk wont hold temperature and freezes up every few days to a week. No more Whirpool for me.

Just like so many on this site Bought Whirlpool Model #WRF990SLAM02 refrigerator new in 7/2013. Just went on vacation for 2 weeks, I come back and the freezer and ice maker are not working. If what everyone on here are saying is true then it looks like I too will have to purchase a new refrigerator and you can bet it wont be a Whirlpool.

Purchased new home with Whirlpool appliances installed Aug 21/17. Six months ago, I noticed that when I opened the door to the microwave over my range, the light flickered. A few months ago, intermittently, stopped working, now, not working. After reading the reviews, I am having the same problems other consumers are having. DEFECTIVE PRODUCTS! DONT BUY!

Whirlpool Cabrio washer - Its very expensive and it quit after 3 years. Repairman said computer component went out and it would cost $450-$520 to repair and it wasnt worth it. He also told me I should have read reviews first. Whirlpool said I should have bought extended warranty. No more Whirlpool appliances will be bought for our homes or business.

Ill be just as responsible as Whirlpool and Nasons has been... I bought my Whirlpool stove less than 2 yrs ago from a reputable business in a nearby community, CROWN POINT, INDIANA! I have had trouble w/ the burner knobs ever since I bought it...just brushing up against them turns them on. Enough gas escapes into the kitchen... I bought knob covers to prevent that (they did NOT work)! So I called the place I bought the stove from and they sent out a repairman...he said there was no fix for it... but that I owed him $69.99 for the service call. And every time I turn the oven on to heat it to bake something you smell gas also... Im almost afraid to use it... 3 nights ago I woke up to the kitchen filled w/ gas...knob covers on but still one was still on a bit... it was a whopping -25 and we had to open windows to clear out the gas... you shouldnt have to check the knobs once youve turned them off. Nor should they come on when you brush by them...when youre not even cooking... Granted I am short but the serviceman said I should move everything I needed to cook w/ closer to me so I didnt have to brush up against the stove... what????? I have cabinets above and all around the stove. What I cant use those cabinets????? Something is terribly wrong w/ the stove and the service... If youre in the market for a new stove, dont buy a Whirlpool and for certain DONT buy anything from NASONS appliances in Crown Point Indiana... They along with whirlpool dont stand behind their product... They told me they never had that complaint before. WRONG, I read it more than once on this site...liars all of them!

I have had my Whirlpool Cabrio washing machine for 14 years. I feel this is very dependable and cleans my clothes efficiently. I love the large stainless steel tub without the agitator. I can fit a king size comforter in the machine. The only problem I had with it was to clean the lint out which I would assume would have to be done to any machine that is used every other day for 14 years. Love it!

We purchased a Whirlpool Cabrio Washer and Dryer in 2007. The washer sounded like it was going to take off and started leaking water. Two repair techs later, we found out it was the center bearing. They actually laughed and said they saw it all the time. It could be replaced (you need to replace the whole drum) for $300-$500, but I was told it would never be the same. I spoke with Whirlpool numerous times and they said they would do nothing, and I should have purchased the extended warranty. All I ask is for a company to stand behind their product. Im very disappointed.

Im glad to see that Im not the only one that is dissatisfied with Whirlpools products. Three weeks ago I found my basement to be flooded and you could tell that it was from the hot water heater that was installed in 2005. The plumber changed the release valve. I thought that was it. This past Wednesday I go down the basement and find another flood. The plumber said pilot was not lit. The explanation was wind could have come down the chimney and blew out the pilot. Pilot was relighted and within 12 hours there’s cold water again. I called the plumber again and said that the thermal coupling must have gone bad. I went to Lowe’s to get a replacement and found that Whirlpool is sending a free replacement but I would have to pay shipping. All well and good, but what do I do in the meantime for hot water? If Whirlpool made a mistake, why didnt they send the replacement parts to the businesses that sell their products? I guess that would be the simple solution; instead, they expect me to pay $30.00 for shipping and be without hot water. Well, let me tell you: Im tired of this hot water heater. Whirlpool can go out of business for all I care because they dont stand behind their products. Im going to buy myself a Rheem and Im sure Ill be a lot happier. Need a new hot water heater? Don’t get a Whirlpool!

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

Whirlpool N50T91-403 purchased in Mar 12 had an error code 4. I knew the water heater had a safety installed in it when I was working on the plumbing and allowed it to drain the hot water side down to 16% of capacitance of 50 GL. After the plumbing issue was resolved, I saw the water heater had shut off (thermal protection) but the switch wasnt tripped as far as I could tell. Knowing small processors can only remember anything if they have power, I removed the Honeywell circuit board and with my multimeter probed all of the capacitors contacting them both (-) and (+) and in reverse order. Doing this forces the IC to forget its codes because they require a small amount of voltage to remember them, usually powered by a small capacitor. I reinstalled it and voila! Presto! It works again.

I have a model FG1F4034T3NOV water heater that was a problem since day one. The pilot will not stay lit, and apparently, there was some sort of class action lawsuit due to a defective part that I missed out on because I didnt know about it. The telephone representative is quick to point out that it is out of warranty due to the date of manufacture and that it needs about $200 in parts because I cant find the receipt from 4 years ago, when I bought it from Lowes. The company flat out refused to do a courtesy replacement for parts or discount them.

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

Horrendous product! Purchased December 3, 2014 – had service technician from Whirlpool check the unit for excessive noise 3 months later. Technician said it’s the way it is designed – ice maker in door, air has to be forced up from freezer so it makes a lot of noise! Now, 15 months later, the refrigerator has totally quit. We are waiting for technician from Whirlpool. Obviously, no extended warranty so Whirlpool said they would extend the warranty and cover this visit for $357! How nice of them since they are sure the parts will exceed that amount!!! What a piece of trash – guess the refrigerator is only meant to work about a year! NO MORE WHIRLPOOL! I am thinking about standing outside of Home Depot to warn any customers who are looking for a refrigerator not to buy Whirlpool!Updated 3/23/2016 - To add to our previous review, the service company, AIG finally after 3 days has approved the parts required to fix our with less refrigerator (15 months old.) It will take 8-10 business days for the parts to appear! We have no refrigerator for at least two weeks! Great service from Home Depot and AIG!

My refrigerator is now 5 years old. I have a stainless steel fridge. I didnt even have my fridge for 2 months and the one door started to rust. Whirlpool did fix that but now my fridge isnt staying cold. My extended warranty was just up 5 months ago. Figured some of the repairmen that we have called wont touch our fridge because they say the model that we have breaks a lot and that Whirlpool discontinued making this model. I am disgusted with this fridge.

I love my Whirlpool gas stove and oven. We opted for the convection feature as we are a family of 7 and often need multiple items in the oven. This was a very useful detail. I didnt know I needed that. I now cant go without!

Whirlpool Cabrio washer - Do not buy this washer. I have never placed a comment on the web before, but after reading about the same problems over and over, there should be a class action suit. The spin cycle will not balance. You have to stand over the washer and readjust the laundry. I called Whirlpool and I was told to unplug unit for 5 mins. This is a $800 washer that lasted about 2 years.

Purchased a Whirlpool double door refrigerator and within a year the freezer and refrigerator doors were severely out of line. Called repairman who said the risers were broken, they were plastic and needed to be replaced. We did that. The doors were again out of line so badly that you had to push the refrigerator door side hard to get it to close. Repairman came today and stated he would recommend ditching the refrigerator as the risers in the bottom of the refrigerator are made of plastic and will continue to break. He leveled the doors but stated that they will continue to become out of line again.The repairman stated that this is a design defect in the Whirlpool refrigerator and he has replaced the risers in many of the refrigerators repeatedly. As if the refrigerator isnt enough, we own a Whirlpool Duet Washer and Dryer. Within 3 1/2 yrs the motherboard went bad in the washer and we had to replace it. The part and labor was almost $400. Whirlpool considered us a valued customer and offered us a comparable washer for $500 and they would take ours away for $20 extra. Only problem is that our original washer was $1,000 and the comparable was not as large as the one we had and did not have the stainless ours had.All I can say is if were valued customers I would wonder how they treat their less valued customers. All of this is to say that I will no longer purchase any Whirlpool products. Not only are the products below par but the customer service is non existent. They really do not care if they lose customers or not. They dont want to hear your woes about their appliances.