I purchased a washing machine in year 2002. It was working perfectly. Recently, its drive belt started slipping. I called local service center, S. R. Enterprises, with mobile number 9204792391.The technician came after 3 days and declared that the gear box is leaking and will have to be replaced. They had no gearbox in stock for model f45, top loading, fully automatic.After a wait, they took away the machine to their workshop on 30.09.2011 and returned it on 04.10.2011.They charged me Rs. 4,730. I will have to be replaced. I found that its LID, which was perfectly okay, is now making a terrible sound when opened and would fall down, not allowing to load the machine. I informed the service center immediately. After many reminders, a man turned up yesterday and declared that the LID will have to be replaced and I will have to pay Rs. 2,000 for that. I rang up the service center to say, Since it has been damaged in your workshop, you should replace it free of cost to me. Their reply was evasive and negative. I called your call center and they registered my complaint - customer number **, comp. number **. I was assured that the LID will be replaced within 24 hours.

I had noticed water on the floor and just thought someone left the freezer open. It started happening about every other day. I read online that it was probably from the drain in the bottom on the freezer being clogged or frozen, and I found instructions on how to fix it. After we took the door off, the drawers out, and the back panel off, then we started thawing the drain. Finally, I got it cleared out. Here I am, a month later, there’s water on the floor again.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

I bought my Whirlpool induction stove several years ago. We normally use a toaster oven for baking as we are only 2 in our home. Last year I decided to cook a large turkey for the family. I threw the turkey into the oven and started cooking it. After an hour or so I decided to start cooking the potatoes etc on the stovetop portion. My potatoes started cooking and my element shut down. I did everything I could to get it going but finally resorted to the manual to see if there was a suggestion. The suggestion was that the oven had heated the burners too high and that I had to shut off the burners and wait for 5 minutes and try again to use them. The oven was only cooking at 300F. I waited 15 mins to get it running again. The stovetop went out once again and I had to stop cooking. Conversely Ive had the same issue with the oven. Ive been cooking in the oven and have had it shut down as a way to address the stovetop being too hot. How am I suppose to cook on this unit with any kind of confidence? I did an online chat with a rep today and they suggested getting a technician over to the house. I was told I could pay $129 to have them look at it. This is obviously a design flaw that I was never told about prior to my purchase and would never have bought had I known. Shame on Whirlpool!

Never again will I buy a Whirlpool product. I paid over $800 for a new washer 51/2 years ago. I had it worked on twice under extended warranty. Now the bearings are out of the tub and it sounds like a jet taking off when it spins. I had whirlpool products in the past and they lasted for years with no problems. I have a friend who has a relative who is an engineer for whirlpool and his job is to engineer their products so they fail within a certain time frame. They dont want them to last like they use to. They now have gotten their product line to the point where they can tell when it will fail. This is crap. What happened to products that lasted like they use to. NEVER BUY WHIRLPOOL.

We purchased the Whirlpool double oven with convection to go into our new home 18 months ago. I used the self-cleaning cycle on the bottom oven for the first time last weekend. Halfway through the cycle the control panel went blank. Basically both ovens died, and the bottom oven door is locked. After researching online I learned that this has been an issue with the self-cleaning feature on Whirlpool ovens for some time now. So buyer beware, if you decide to purchase, dont use the self-cleaning feature.

We have all kitchen appliances from Whirlpool, but it is not what we choose, that was builders choice. We, two people, are living in his apartment for almost five years, and first problem was with oven - the window in the door it is leaking somewhere, then microwave - the all front door plastic is cracking (we using microwave maybe twice a week) and is it placed under the oven. Now we have problems with fridge - the plastic inside the fringe is cracking. We called Whirlpool customer support and Whirlpool do not even want to hear it about the problems - they just want that same authorized technician will came to your apartment to inspect these problems for $95, it is not even important whose fault it is. This company, Whirlpool really DO NOT CARE about the products, which they produce - as long it is sells... Now we know, we made smart decision - do not accept the washer and dryer (we get it from Bosh - it makes me happy). Now we just wait till all Whirlpools appliances will stop working and never ever look back to Whirlpool.

We purchased in July 2016 from Best Buy. Very nice product. Our former Whirlpool had lasted 20 years and was a work horse for our family. The new one began not freezing ice cream in November. Then, it would periodically freeze things very well and then not freeze items fully. We contacted Best Buy thinking we had a lemon. Worthless - no help. Told us to contact Whirlpool directly. The repair person came out today and told us that our refrigerator cannot be in our garage outdoors because the energy efficiency of the refrigerator causes it to shut off when the surrounding temp drops below 54F. Our former Whirlpool had been outdoors in our garage in that spot for 18 years, no problems. The new models now no longer operate if the air cools down around them. What!? There is no warning information, no sales information, no way to learn this until after you shell out 1000 dollars and lose your frozen food. It is in the manual in fine print, but we didnt read the manual cover to cover when we got the refrigerator, and we sure didnt read it BEFORE we bought it. And no one at the store, nor the installation people who represented Best Buy as paid installers told me I couldnt have this outside, even though I specifically told them I was buying it for our outside extra fridge and freezer to replace the old one, and the installers installed it outside. Technically our refrigerator is working as its supposed to apparently. However, I think it should prominently be noted on pre-sales materials that it must be operated indoors only (in climates always >54 degrees). Now I have a new refrigerator that I cant use as an extra in our garage. Apparently all the new fridges are energy efficient like this and shut off below 54. I cannot find any info on the internet about this, or any other complaints about a similar situation to mine. How does that make any sense? Freezing is 32 so any frozen goods will thaw, by default, always, if the machine is in cool environments. Phooey on this design spec. Dumb engineers.

Cabrio Washing Machine - I purchased my washer and dryer in May of 2008. I had problems with sheets, towels and pants getting very twisted and tangled, but I just attributed that to a design flaw. My problems really began in January 2013 when loads were not level all the time. It didnt matter if it were 1 shirt or a load of towels; you had to stand by the machine and it took forever to finish a cycle.On 1/11/13, the first repair was the rods that kept the drum stable. $260.82 later, it worked again. On 2/16/13, the washer quit working. On 2/18/13, the repairman was back out. It needed a lid lock switch. It was $87.14 that time and he would be back when the part arrives ... There was still no washing machine. On 2/21/13, he returned with the lid switch and replaced it. That was $178.04 but wait, there were still other error codes so there was no working machine.I refuse to pay anymore as I now fear I will be buying a new machine after spending over $500 in less than 6 weeks, but Whirlpool did the right thing when I called and they agreed to repair the machine. They wanted a different company to come diagnose the problem (the machine gave an F50 and F51 error code to the repairman here on the 21st), so I have to wait for another repairman to come and look at the same codes flashing on the LED readout.On 3/1/13, the A&E repairman that Whirlpool sent out arrived at my house. I have been without a washer since the 16th of February. He diagnosed the problem and said that it is a $1,000 repair! I called Whirlpool and asked for a new machine, instead of throwing more money at this one. They informed me that if I didnt like their offer, they wont do anything then. I agreed to the repair.Parts started arriving at my house. On 3/13/13, another A&E repairman came out and started to fix the machine. He informed me that there was more wrong than the first guy thought, but he had the circuit boards so he would get it going. On 3/24/13, the washer quit working again and was flashing an F51 error code. This is the biggest piece of junk I have owned in my life. I have missed 5 half days of work since January and there is no end in sight. Why is Whirlpool allowed to get away with such an inferior machine?

This is my third Whirlpool refrigerator. The first two lasted about 20 years each, and although not fancy, they were always serviceable. This one is different.Because of my kitchen cabinets, the only refrigerator with as much storage capacity (cu ft) as my old one was what seemed to be an almost identical Whirlpool, with the only exception being a slight difference in the ice maker. But this one is a disaster. The water/ice dispenser has been changed to one with one space only for your container. The water that comes out is warm, because the routing of the tube has been changed and it no longer goes through the chilled refrigerator space; the ice pours out so hard that usually half of it lands on the floor. In order to operate the dispenser using anything with less than a 4 diameter, you need two hands: One to depress the lever behind your glass and one to hold the glass farther away from the refrigerator. Failure to do that results in a wet mess. After dispensing crushed ice, it continues to send small pieces flying long after I change the switch to cubes. But that is the least inconvenience. In an apparent engineering change to meet energy efficiency, the new refrigerator recycles air from the freezer to the refrigerator compartment. That and other changes in the frost-free engineering have resulted in:Uneven cooling in the refrigerator. In fact, it froze $1800 worth of insulin pens. I was advised by the Whirlpool representative that I shouldnt have put them on the shelf where the vent from the freezer spews out freezing air. Spoiled food in the freezer. Everything in the freezer develops a thick coating of ice crystals within a short time. This dries out the meat, shrinks the popsicles, and destroys the quality of fish and fowl. At this moment, I have two pork chops that defrosted in a plastic container on my kitchen counter. I bought them fresh, and now the 10-12 oz. of pork is swimming in over 1/2 c. of water.Interior fittings are poorly made and shelves and drawers do not work easily. The allegedly stainless exterior is difficult to clean, and many reviewers have remarked that they find rust within a few months. I could go on. There is more poor engineering, and an array of noises filling the kitchen, but you get the picture. I wish I could trash this refrigerator and buy a good one, but that isnt feasible both because of budgetary and space constraints. The last service person who came out sighed and told me that the refrigerator was cold, and that meant that the unit was operating okay! I HATE this refrigerator and struggling with it from day to day. My hope is that no one will buy a Whirlpool ever again. I certainly wont.Updated on 12/05/2017: Whirlpool, faced with my wrath over a refrigerator set on LOW that froze $1800 worth of insulin, provided a replacement (25 Cu Ft side-by-side refrigerator). I have owned two previous Whirlpool refrigerators -- for 20 years each -- as well as other Whirlpool major appliances. I WILL NEVER BUY ANOTHER WHIRLPOOL APPLIANCE. The replacement is deficient in every design and functional aspect I can think of. Temperature is uneven in both freezer and refrigerator. Food in the freezer is coated with snow within a week and dried out and spoiled within a month. Ice comes out with such force that it ricochets out of the glass and around the floor. Water from the dispenser is warm. Leafy vegetables spoil within 2 days. Whirlpool sent technicians who informed me that the unit was working properly because it was cold. PIECE OF JUNK! DONT BUY ANYTHING MADE BY WHIRLPOOL!

I purchased the Whirlpool Cabrio washer and dryer about 5 years ago. I wanted to pay for a good pair to last a long time for the money. We have had a repair man out twice for the washer. They ended up replacing the computer board. It worked fine for a few years. Now, it keeps getting the unbalanced error code for almost every load of clothes that we start. Sometimes, it takes 20-30 minutes of rearranging the clothes to get it to finally work. I have had to manually set it to finish the loads on a number of occasions. It is so time consuming to do laundry due to having to play with the clothes to get the loads to finish. Plus, I dont know how many times it has woken up my grandkids because of the loud thumping noise it makes when it gets unbalanced. I have never had a washer do this. I would expect when you pay big bucks for an appliance that it should last a long long time. One usually gets what they pay for. I should have bought a cheaper pair. Then, they probably would have lasted 15 to 20 years.

Very pleased with my Whirlpool dishwasher. It is not the top of the line but does a great job of cleaning my dishes and is very quiet when running. Whirlpool appliances have been very good to me.

I purchased a Cabrio top-loading high efficiency low water washer thinking I was doing something for the environment by saving on water and electricity. After about a month, I noticed that my clothes especially those with stretchable fabric were getting larger. My husband kept telling me I was imagining it. Then the clothes would get all tangled especially the pants with ties on the waistband. At the end of the cycle, the clothes are stuck on the sides of the washer and I have to pull them apart. Even after drying, I have to iron everything even my pillowcases which look like they have shrunk they are so wrinkled. I recently bought some 100% cotton outfits and they are even more wrinkled and are starting to lose their shape. I am now noticing that the stains on the clothing are not coming out even when I use a spot remover and put them through a second time.Now I started to notice an odor coming from the machine and my towels and wash clothes have a sour smell. I paid $600 for this machine and after reading the reviews, I just want to replace it. I am now waiting for it to break down. My husband kept insisting I must be doing something wrong. When it goes into the spin cycle, it bounces all around and I have to push it back in place when it is done. I do not think the clothes are getting rinsed enough so now I put them through a second rinse and always put it on low spin. It doesnt see to matter, it sounds like a rocket ready to take off. Is it even worth it to go back to Lowes where I buy all my appliances?

I purchased this washer over 8 years ago and we have been using it 3 to 4 times a week/ 52 weeks a year since. It has performed flawlessly up until about a year ago when it kept given me uL error. Everytime I wash the basket always spins wobbly and unbalanced it seems. I checked the Internet and it turns out others have had the same problem. The solution was to replaced the 4 springs supporting basket and that fixed the problem. Been working ever since.

We purchased a Whirlpool Dishwasher from the Home Depot, it was installed 3-28-2015, less than 30 days ago. On 4-21-2015 the dishwasher stopped working. I called Home Depot expecting a replacement; but we were told you have 48 hours; you need to contact Whirlpool, due to the CRAP warranty. I called Whirlpool, we were told that a TECH would need to come out and address. They came today, ** , told us that the Motor is bad. (NOTE I havent made a payment on this dishwasher). So we called Whirlpool, expecting they would replace. I spoke to ** who advised me they would not replace, only repair. I explained this is unacceptable for a new product. I demanded to speak to her Manager; Spoke to ** who said the same. I asked to speak to her manager, his name is ** , but HE DOES NOT DEAL WITH THE CONSUMERS, this is beneath his job class I was told. So NOW I have no choice but to have this Dishwasher repaired; it will take over 2 weeks to get the part. I just dont understand how this is good Customer service. It is the worst I have ever experienced.

IPod the Gold Series from Whirlpool appliances including the French door with the freezer on the bottom the induction still two ovens and glass top the microwave in the dishwasher does it cost me about $8,900 dubstep problem with it is after two-and-a-half years of using it the freezer stopped working and coming to find out that not only mine but three other ones in my account have the same problem. The sealed system for the freezer had a leak in it. I lost the freezer traffic to Whirlpool. First time around they said, No problem well take care of the part. To take care of Labor. I waited a month. Nothing happened. I called them back. They said I needed to do something else so I waited for it to happen. Nothing happened. Now I call back 8 weeks later without a refrigerator my house come to find out they told me theyre not doing nothing.Well four weeks later now Im sitting with the stove which cost me quite a bit of money like $2,000 for the induction stove. Now its burned out the computer components. Control panels are both out. It will cost $800 to repair it. Now well pull. Said they will also pay for parts for that but not for the labor so now Im stuck without a refrigerator and I dont have a stove in my house and theyre saying its okay that these very expensive piece of equipment that I bought and its okay for them to only last 2 years. Never had a Whirlpool last me less than 10. I think theres something wrong with this picture.

Bought unit from Lowes in july 2017. Shortly after icicles started forming on the roof of the freezer near where the door & frame meet. Called authorized service repair company to have them check out. Tech knew right away what was wrong. Appears Whirlpool has the parts made in China & then assembled in the USA. China has overfilled the freezer door with insulation warping the door. This makes the door seal sag on the bottom & pull away on the right side. No way to repair. Was told they need to order a new freezer door.Weeks later I get a call that Whirlpool cannot get a door replacement!!! Said they will give Lowes a store credit. The floor model at Lowes has the same defect. When Lowes ordered a replacement unit they opened the packing & found that this unit has the same defect. I am replacing with a Frigidaire! Where is the quality control at Whirlpool. Anyone at Whirlpool who puts these units together could not help but see this defect - but ignores it & ships it out anyway. Thats what you get from farming stuff out to China. No excuse on Whirlpools part. Maybe Trump can save Whirlpool.

The machine is reliable, does not take forever to do a load, it is relatively quiet. It has sufficient options depending on the size of the load. Additional options are time setting, choice of warm, cold or warm/cold water settings. On light and medium loads it extracts almost all of the water; on heavier loads an extra dry spin does the job. In all the years that we have had it, it has required only one service call. The maintenance man told us that this model is the best in a series and he recommends that we hang on to it for as long as possible. We're very happy with it.

I purchased Whirlpool french door refrigerator wrf535smbm00 at the beginning of this year and it has really made my house an unpleasant place to be. My main complaint is that it is very, very loud, and seems to vibrate through the whole house. It runs most of the time at a level of 60 dB, which might be considered a low noise level for a mechanical appliance that runs occasionally like a dishwasher, but is quite loud for an appliance that, according to their own specs, runs at least 40% of the time. Nobody wants to notice their refrigerator. They just want it to work.Which brings me to my second complaint, the temperature control is all over the place, generally ranging from 25-50 F. I find it difficult to believe that the government, which always seems overly concerned about the temperature of restaurant food, or the pasteurization of cheeses doesnt care that an appliance nearly every American household has doesnt necessarily do its job, and isnt required to display internal temperature. The old-fashioned set this dial to an arbitrary number and hope its cool enough is not charming.Finally, though the finish is listed as stainless steel, mine started sporting tiny rust spots after only three months. Whirlpool states that Cosmetic issues are covered by the manufacturers warranty for the first 30 days of ownership only. After the first 30 days any repairs for cosmetic issues are the consumers responsibility. It seems as though they know theyve used a low grade of stainless steel.

This product is just DISAPPOINTING. The gas knobs got stuck TWICE IN 13 months only! The range is NEW! The first time 3 out of the 4 knobs broke, this time only one. It would not turn off, so we are forced to climb on the counter and turn the gas off every time we are finished cooking and turn it on again. The company wont be able to send us anybody till next week, which will force us to go on like this for NINE days plus, of course, the time it will take to order the parts needed.There is not even a back up emergency service, which should be in place since we are dealing with GAS! I have heard complaints about this product in this area: in my opinion the range should be recalled. Of course, the representatives one talks to are all trained to keep calm and reply the usual things: Oh, I am sorry etc. but the bottom line is that neither the product nor the customer service are good (the first customer service person was not very friendly either). I highly recommend that you AVOID this range if you are considering buying a gas one with double oven.

I have purchased one refrigerator double door Mastermind 230 Ltr. capacity on 08/02/2009 at a price of Rs17200 from Himanshu Sales at Halol, Panchmahal, Gujarat. After one year, there was a problem in the refrigerator. My complaint was given to Himanshu Sales Halol. A service engineer came and replaced OLR and starting relay. I was charged Rs500. The bill was not given. Again cooling was not achieved. My complaint was given to customer car complain no. 22265 on 26/04/2011. Service engineer came on 10/05/2011 and reported that compressor get overheated. He has replaced compressor, capillary, gas, starting and overload relay and charged Rs1650. But compressor continued on, it does not cut off on temperature. I complained on 22/05/2011. Again service engineer came and replaced thermostat and charged Rs150. On 02/06/2011,again cooling was not proper. I complained on 05/06/2011. Service engineer came and advice to send the refrigerator to service center at Halol at our cost. After one week, it was sent back to me. Still ice not forming in freezer. We thought that it is due to summer. We also informed Himanshu Sales Halol. They advice to give complaint to customer care. Complaint was given on 28/11/2011. On 29/11/2011, a service engineer came and informed us that the compressor overheated. On 06/12/2011, the service engineer came with new compressor. He replaced the compressor, capillary, starting and overload. After gas charging, fridge was started. Still ice was not forming in the freezer and there was abnormal sound coming from compressor.Now we are tired to take service from Whirpool. I think this is a company defected piece, so send some senior authority to check the same and to take necessary action. Also due to this problem, my electricity bill got on higher side, and the purpose of the appliance is not solving. On 12/12/2011 at 11:30, the service engineer came and put some instrument to measure temperature at freeze on super cool mode and told that he and Samir will come to check the same. After that, compressor was in running mode up to 19:30 without cut off on temperature. Nobody has came to check,we called him. He replied that Mr. **, the regional head, will come tomorrow, 13/12/11. Still cooling is not achieved, We have registered complaint under complain no. AH1211007719 dated 13/12/2011.

I bought the Whirlpool Cabrio washer and dryer combo with max load capacity for comforters. This is the biggest set of junk ever. Where to start? There are so many issues, starting with the fact that nothing comes clean, no matter if I even put one small item in it at a time! The fabric softener dispenser is a joke. It runs straight through into your unwashed clothes before the cycle even begins. The dryer never gets the clothes dry on the first cycle. I find that I will rewash the same load of laundry 2 or 3 times and still not be clean and then dry same load 2 or 3 times. I wish Whirlpool had these shoved up their **! Never again will I buy anything by Whirlpool!

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

Both glass doors have a streak between the glass and you cannot get to it to clean. It looks like you havent cleaned the glass. I bought this 2 years ago. I am worried that the glass may break and heat escaping from the oven.

I bought a Whirlpool washer and drying matching set (model 6400sw3). I liked it because it was extra large without agitator in the middle. Ive had it for about 2-3 years and I have already replaced the drain pump, motor and barrens, it has cost me over 500.00. I thought now OK its working fine, but now its giving me a code every time I wash of LD. I am so fed up with this!! I should have bought a new washer but I felt as much as I put into it, I basically built a new one. And now this code comes up every time and I have to power it off. Im not sure if anyone else has had this problem but I just dont know what else could go wrong with this. I will never ever buy a piece of junk like this again!!

I bought 2 Cabrio washing machines for my two homes along with the matching dryers. They worked for about 3 months, then the washers displayed OL Error during any wash cycle. I tried to contact manufacturer and have not been able to get service without charge. After reading the many posts I am not sure if I should dump both or start investing $$$ in service calls.

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

Bought a Whirlpool Cabrio Washer, which I see has MANY complaints. I had a problem with the F1 issue during the first year. Same issue and I was also told Whirlpool knows it was bad design yet they refuse to help the consumer in anyway. Maybe 50% a new WP washer. Upon my call they will fix it for 389.00 and give a 1 year warranty again. Im no longer confident in WP products.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

I had whirlpool microwave model # WMH32517AS-2 that came with my new home in March of 2013. In September of 2013, we noticed there were times that the microwave failed to warm the food or liquids (coffee) sometimes at all. Then we figured out that we could hear the noise it makes when it actually warms the food. So after a repair man came out and saw the issue of not warming up, he replaced many parts but within a day we experienced the same issue. Whirlpool had a different repair man come out and replace additional parts hoping it would fix the issue but unfortunately, it did not. Whirlpool said they would send another microwave to us in January of 2014 but now its April 2014 and nothing sent and I have a broken microwave in my house. Due to the length of time it has been, I had to submit this. We have also called customer service on 5 occasions (who have these call documented) and the person that was supposedly helping us and assigned to our case 7 times with no response. We have attempted to talk to a supervisor but were told that I could not, which is unusual. Its just frustrating that this is happening.

We purchased this model in July of 2019 and have had nothing but problems with it since. The design is really bad - if you set the temperature on the ideal setting, everything on the top shelf freezes solid. If you reduce the setting to the one below ideal, your freezer doesnt get cold enough to keep ice cream hard. The ice cubes are a little more than half the size of our last Whirlpool refrigerator and the unit is noisy. Weve had Whirlpool out to work on it 4 or 5 times in the first 6 months and twice weve had to throw away food due to the unit not cycling on and off properly. One of the technicians told us he spends a lot of time working on this particular model - evidently, it has a lot of issues. We are now using our old garage refrigerator while we try to get Lowes to give us a refund on this piece of junk.

On the 10-05-05, I purchased a Whirlpool natural gas water heater from Lows Orem. The unit has a 9 years warranty agreement. Lows sales S0178JC3 647605; cost $378. Model number FG1H5040T3. Serial number 0515140765. Following installation, the unit has failed repeatedly. Since keeping records of the failures, the unit failed either by the gas control valve or the thermocouple on December 2011, November 2011, April 2010, February 2009, and April 2008. Whirlpool has at all times supplied the parts but denied that the parts are technically faulted. Whirlpool has further rejected all requests to refund me for defective product. The major consequences have been an unreliable water heater. There were periods without hot water. Time was spent involving undertaking repairs.

After buying the best washer and dryer out there, I have found out that they are not. Thank you Whirlpool for taking my $2000 and giving me a junk. I know that you do not care one bit. Never again.

I purchased a whirlpool duet washer & dryer several years ago. In the 3rd yr or so, the dryer kept shutting off with beeps prior to clothes dried or cycle completion. Whirlpool gave me an option for an extended warranty given that the orig one had long ended. I purchased it - a one year warranty. In that year I have had technicians to my house 6-7 times to diagnose or swap parts. They eventually swapped all 3 boards on the dryer. It still shuts down before clothes are dry. Whirlpool tells me that they outsource this service and take no responsibility for either their lemon of a machine nor their lemon service company; Alliance Repair. I would like the money back for the extended warranty so that I could buy a new dryer and all I get is a runaround from both the service company and whirlpool. I will never buy whirlpool again and advise anyone out there to also not buy their machines.

Absolute junk. Bought an entire matching set 2 years ago. Fridge, microwave, dishwasher and oven. Oven is the most user unfriendly thing I have ever bought. That’s my fault. Microwave failed. 300 to replace. Ice maker in side by side fridge failed, another 300 dollar fix. I used to have a field mouse or two get into the house every year. Don’t have that problem anymore because the fridge is so loud it scares them off. Talking to Customer service was the most frustrating thing of all. They think if they say your name in a nice soft tone long enough it will make everything ok. Mother and father raved about Whirlpool products. How times have changed. Do yourself a favor and steer clear of these products. Also, look up the other brand names made in the same factory and steer clear of those as well. I used to think appliances were all the same. How wrong I was. Do your research. It will save you a bundle in the long run.

I love my washer and dryer. The only problem I had over the past five years since I bought them was when the motherboard went out on the dryer. Luckily I had insurance, so was able to have it replaced. The features on the machines and their ability to clean really well have made my life much easier when it comes to doing laundry!

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

Oct 14th I walked down to our basement to find it flooded. Turns out the leak came from the solenoid that controls the water feed to our Whirlpool Gold Series refrigerator. Now, some $28,000 in damages later - floors/cabinets/walls/electronics - you name it. The repair company said that they replace these units a lot as it is simply a faulty design and Whirlpool knows this as this part is very difficult to obtain - too much demand. Well aside from the cost, the inconvenience, and the rise in our insurance rates the repair person said there was a good chance of the new part failing as well - it just cant take the water pressure as it is just cheap plastic. My advice - stay away from Whirlpool!

I bought Whirlpool hot water heater with the Honeywell part in 2014 and the thermal box went out. No flashing lights, no way to reset. I understand that Whirlpool had a class action lawsuit after researching. Still selling this product to consumers. Whirlpool should be held responsible, and be made to give an allotment to replace homeowners with hot water tank of choice! If lawsuit is active please add my name.

I love my Whirlpool LP Gas Range. Cooks great and bakes wonderful stuff. Also has a drawer under to hold pots and pans. Self Cleaning Oven. I do a lot of baking and I cook three meals a day. The burners are easy to clean off on top. I try and wipe spills up in the oven as much as possible, It has everything on it that I love, except it could have a plug in which would really nice.

I hate my Whirlpool refrigerator: It has a upper freezer with no light. The shelves are not split and raising or lowering shelves gains nothing and may even take space away. I would never ever buy another Whirlpool.

We bought this washer from Sears with big hope. Within the first year, we had 14 service call covered by the warranty but required 2 to 3 weeks in doing without. Whirlpool replaced the washer at no charge but continued to have various issues over the years. The new one is the control module that Whirlpool knew was faulty but did not let their customers know. The control module went over the weekend but I repaired it myself and do not have any more issues. I literally went in and tightened all of the hardware, removed and install the pulleys, motors pumps and replaced a lot of keep components with better quality. Guess that year the CEO made only 20 million rather than 19 million. Being an American company I was disappointed by the consumer relations people but everything is a throw away nowadays. Will not buy a Maytag or Whirlpool product again. Where has American product pride gone?

I purchased a brand new Whirlpool washing machine only 2 yrs ago. Rather than lasting upward of 10 yrs with normal use as advertised, the machine is nothing more than a giant wash tub. It doesnt Drain and Spin properly. The clothes are still wet at the end of the cycle and I have to either attempt to wring all items by hand or set the machine to Drain and Spin for a second time. Now, it no longer agitates the clothes during either the wash or the rinse. I am SO disappointed in this and very angry that I trusted this well known brand with my hard-earned money. I am also angry at myself for not reviewing internet posts as I am hearing the exact same experiences by others time and again.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

Whirlpool Duet Machines - I feel very fortunate as I have not had a single problem whatsoever with my Whirlpool washer and dryer and it is 5 years old. Never once have I needed a part or had trouble with it. I feel bad for those of you who are dealing with this as what is worse than a washer/dryer that does not work?

I had a 14-year-old 40-gallon tank that was working great but I decided it was time to get it replaced. I picked out a Whirlpool 400-gallon tank stated to be good for a family of 3 to 4 people. Immediately after installation, I got complaints from family members that there was no enough hot water for morning showers. I turned up the thermostat to the maximum 140 degrees, but there was still wasnt enough hot water. The Whirlpool rep on the phone stated that 3 people cant take back-to-back showers. The unit wasnt designed for this. I told him the unit is advertised for a family of 3 to 4 and I have only 3. I asked where on the advertisement does it state 3 people cant take back-to-back showers? His response was, Where does it state you can? I asked his name and he would not give it to me. If 3 people cant take showers on a unit stated to be for a family of 3 to 4, something is wrong. Maybe it should be advertised as suitable for a family of 1. I will not buy a Whirlpool product again and I advise others to take my advice, go elsewhere.

My husband and I purchased this washer in August of 2011. Within 2 years the lid broke because of it a cheap plastic frame on a heavy glass lid. At that time I researched it and found many people with the same complaint. Whirlpool would not do anything for us but the company that we purchased it from did agree to supply the part if we paid the labor. We did this and replaced the lid. Well here it is just right at 2 years again and the lid is completely broken and the washer is unusable. There is no way to bypass the lid issue which makes the washer completely useless.I called Whirlpool again and was told there was nothing that could be done and that because there was not a recall on the product, they would not be able to do anything for me. We have purchased a new Samsung washer that received excellent reviews from Consumer reports and we will NEVER buy another Whirlpool product again. I cannot believe a company that old and as large as Whirlpool will not stand behind a faulty design and faulty made piece of equipment. It is very disappointing.

In January 2016 we ordered a Whirlpool Dishwasher through Home Depot. First, Whirlpool delivered the wrong dishwasher and the installer took my old one away - leaving minimal options to correct the problem quickly. Home Depot did not make the order Model # error but they did compensate for the error. Now, with 18 months of very low use (2 in household - prewashing all the dishes) the pump on the dishwasher is gone. Before posting this review I contacted Whirlpool via email. Two weeks later I had a phone message and I returned the call only to wait for 30 minutes to get through to a customer service agent who could offer absolutely no solutions or compensation for their poor quality product or service. There needs to be a zero on the scale of STARS to reflect Whirlpools overall quality.

Cabrio Washer WTW6600SW1 - We purchased this washing machine back in January of 2007 and have had nothing but issues with it. We thought Whirlpool was an upstanding brand and weve found out otherwise. They havent stood behind their product or the issues we have had along with all the other people. There has been a Facebook page about the Famous F1 error code. We have had numerous other error codes we have had to pay to have someone come out to fix. We paid almost $700 for this machine and have had to pay out several hundred more dollars just in repairs. Not worth the money and the company doesnt deserve to be in business if they dont back their product. I get buying a warranty, but if they are same problem with so many machines, it sounds like a manufacturing defect to me.

DO NOT BUY THIS MACHINE. Mine is less than 2 years old. First one month after warranty expired, the clear lid cracked...$350 to replace! Then a few days ago a rusted circuit board came apart and jammed up my washer. This should NEVER happen. I contacted customer service and they told me that they are not covering this problem and that the service call is $175 and cannot estimate the repair cost. They also could not send a repair person out for 5 days. The washer has not been repaired yet so I do not know the entire cost but it will be expensive!

We have had this Cabrio washer/dryer pair for 8 years now. I didnt want to buy a front loader at the time since they were relatively new and was afraid to roll the dice. We saw the ads for this pair, the washer was the largest top loader at the time and didnt have the agitator (which I liked) so we bought them from Best Buy. I purchased the extended service plan (thank God) because we started having issues within the first month. First was the dryer, it was making a funny squeaking noise. We called to have it looked at and the tech said the drum was out of round. He ordered a new one and it showed up almost oblong. Returned it and got a second (same thing). We straightened it out and put it in. Two weeks later the control panel went out. Repaired it. Then the washer started. In the first 3 years of owning these we had called to repair the washer 4 times and the dryer 4 times. We could have got them replaced after the 5th call. Of course we had replaced all the faulty stuff and the pair settled down for 2 years.Now I have had to repair the washers control panel myself, the dryer sounds like it is coming apart and sometimes runs for hours, and now the washer cant wash in any cycle but delicate because the drum bangs around and cant self balance any more. What junk!!! I know people that have purchased low end machines and have had no issues for decades, maybe a random belt or something simple. I wouldnt buy another Whirlpool set if they were the last manufacturer on the planet. They should be ashamed that they didnt recall these things for all the problems they had.

I had the Whirlpool side by side GSC25C4EYW00 less than a year. The vegetable bin - 2nd from the bottom - front panel broke off. No wonder, there are 2 tabs holding it to the rest of the bin. Its cheap, brittle plastic. Come on, Whirlpool, you have to do better. What a disappointment. Dont buy one.

After much frustration and disappointment, as well as 2 huge repair bills with my front loading washing machine I sent it off to the scrap yard, still looking brand new, and went back to a top loading machine. I purchased a Whirlpool top loading, high efficiency, low water machine. I have had it for almost 2 years now and am extremely happy with it. I would highly recommend it. Fairly quiet and easy to use and takes very little detergent. It does not have an agitator so it is gentle on clothes. I know some users have complained about tangled clothes but, in my opinion, if it is loaded correctly this should not be a problem.

I bought a Whirlpool 5-burner gas range with double oven at a cost of $1700. Almost immediately, the finish above the oven started cracking and now is starting to chip off. When I contacted them, they stated cosmetics were only good for 30 days. We had just moved and were getting settled so we didnt use the range much for the first 30 days. I am very unhappy with this product and also unhappy with Sears for their lack of effort.

Model GB2FHDXWS04 - This refrigerator dumps water all over the floor at least 1 time a week. We just leave a towel on the floor to absorb it because you never know when it is going to happen. Have removed the stuff and cleaned all of the ice out of the bottom of the fridge but in no time it is back. What a crummy unit. I am going to drill a hole in the bottom of it and put in a drain I guess.

Its now Nov 8 and Ive been officially dealing with this issue since Sept 26. This washer was installed in a new home. After less than 10 loads, my washer stopped draining and I was left with a load of towel soup for over a week while waiting for a service call. I still have the same defective non functioning washer sitting in my home and have been unable to do laundry at home in all that time. So far Ive spoken with 2 customer service representatives. The first was incapable of scheduling a service call. She clearly did not understand how to operate the database used for scheduling. I was finally able to schedule appointment on my own but had to wait a week before the technician was able to come by. It was determined that either the latch mechanism or the mother board or both are defective from the factory.The second was just plain dismissive and completely unhelpful. I sat on hold for about an hour each time before getting to speak to a person. Ive also received two canned emails in response to my poor review of this washer on the Whirlpool website. They basically blame COVID for the delays and state the parts delivery should take 3-4 weeks. I was originally told 14 working days for delivery of the parts. We are already past both deadline with no end in sight. At this point, Id like the defective washer replaced rather than repaired. And for the record, this was a new washer (less that one month old) installed in a new house that now stinks to high heaven because slimy, scummy water that will not drain out has been there since September 26. Id really just like for someone at Whirlpool to honestly care about this and take a moment to address this issue.

We purchased an over-the-range microwave in 2005 Model No. MH1141XMQ-1 Serial No. TRS1112979. It has worked fine however, within a year, the grill cracked. It was not covered so we paid for a new one. A few months ago, I noticed a crack near the top of the door by the handle and then a couple of weeks ago, a huge chunk broke off the bottom of the door.

This machine, like all other water sensor machines, will not let you wash a few items that are lightweight without filling the whole machine up almost all the way. The reason being is that if the items are light, they will float in the water above the water level and the sensor thinks it needs to put more water in and even with putting something in to weigh it down like a wet towel doesnt always work, nor should you have to do this. You will waste more water in the long run if you only have a few items to wash, ie baby clothes, underwear, rags, etc. I am so disappointed that I had no other choice but to get this machine.

We purchased a Whirlpool Gold Induction range, model#WF1910H0AS0, from Lowes Home Center for ~$1700.00, about 1.5 yrs ago. One night my wife was cooking dinner on the stovetop and she heard 2 loud pops and the whole cooktop went dead. We had Bobals appliances repair look at the range and they gave us an estimate of $800.00!! to replace the module board. The repairman said the module board had shorted out and burned. Thankfully my wife wasnt electrocuted. I contacted Whirlpool customer service, they said, There isnt anything they can do. The warranty is only 1 year. I also contacted Lowes customer service. They told me the same thing as Whirlpool, nothing they can do, 1 year warranty, etc. I have the part# of the module in the stove, W10390743, serial#31811552. After an internet search, this part # had been superseded, which tells me Whirlpool knows they have a problem. These ranges need to be recalled. I plan to contact the US consumer product safety commission to initiate a recall. Please inform consumers if they have this Whirlpool induction range with this problem, to also notify the Consumer product safety commission.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

Extremely unsatisfied with their customer care. I purchased a washer and dryer 18 months ago and did not choose to purchase an extended warranty. I currently need a main control board replaced after the machine stopped spinning and draining. I hired a wonderful handyman, who originally suspected the lid--locking mechanism was the problem. When that was replaced and the machine still wasnt functioning, he determined the main control board needed replacing. This is a manufacturer defect and costs approximately $300 for the part, not including labor. Of course, my machine is no longer covered under the extremely limited manufacturers warranty that only lasts for 12 months, so I am stuck picking up the bill. Once done with all the parts and labor, its cheaper to buy a new washing machine especially because they still wont add a warranty to it after its fixed. I think its absurd that a manufacturers defect isnt continually covered under warranty no matter how old the machine is. Customer service continued to tell me I should have wasted more money on a company that doesnt care about customer satisfaction and purchased an extended warranty originally. Horrible investment! Will never purchase Whirlpool appliances ever again!

I bought the french door refrigerator Sept 2014. Recently the change filter light came on so I bought the filter. I read the instructions and then when I went to install it, the filter door would only open about 10%. I called Whirlpool and explained it was obviously a manufacturing error. They didnt care. Out of warranty. Everyone can make a mistake but when you wont own up to it and take care of it, that defines your character or lack of it. I think I will video the whole thing and put it on YouTube.

In June 2010 my wife and I bought a new Whirlpool water heater (model ee2h50rd045v). As I have fairly extensive experience in both the electrical and plumbing areas (was head lab technician for an aquatics lab for 7 years and worked with maintenance on a farm for 10 years), I installed the unit myself. Two months later the motherboard fried. Whirlpool sent me a replacement and all was fine. Six months after this the motherboard fried and set the unit on fire. Luckily I was home and caught it before it got out of hand and the circuit breaker had tripped when this happened (the circuit breaker saved the house).After I had ripped the smoldering unit out of the garage I immediately called Whirlpools Customer Hotline and told them what happened. They said they would send me replacement parts. I reminded them that the motherboard had fried once before and that this time the unit had almost cost me the house. I also informed them that I have now worked for Lowes for 4 years and I am responsible for selling their product (in addition to other brands). The lady stated all they could do was send me new parts and the problem probably was with my circuit breaker. I informed her the circuit breaker was tripped so the problem was not there. She reiterated that all they could do was send new parts.The next day I started to remove the control panel and motherboard to find that the plastic had fused itself to the frame and insulation. I called the customer hotline and spoke to someone new and informed them about the new problem with the melted plastic. I was told that the melted plastic could be scrapped off safely and that since the problem was not the circuit breaker, the problem must have been how the wires had been spliced from my conduit into the water heater. The gentleman then proceeded to tell me how to do it in violation of Maryland code and told me he would have replacement parts sent to me. I checked with a certified electrician to make sure my wire splice had been done in accordance with code and he verified I was correct.I then had a Department Manager call Whirlpool. He was given the same runaround and told the parts would be mailed to me. He was also given the story about how the malfunction was due to the wire splice being too tight. He then asked to speak to the representatives supervisor and she told him she would not transfer him over to her supervisor. I have forgotten to mention that 2 months prior to this, a Whirlpool water heater (same model) had been returned to my Lowes store within the 30-day purchase window. The unit had caught fire. Since I had had problems with my unit motherboard at this point, I took that unit apart to see what had caused it. The problem started with the motherboard in that unit also. This is unacceptable. Whirlpool obviously has product quality issues.Sometimes bad units are put out. This happens with every brand. But when the same model has such a high failure rate and is known to catch fire, Whirlpools actions are inexcusable. Currently my refrigerator, oven, dishwasher and obviously the water heater are Whirlpools. I will not replace either of these units with a Whirlpool when they reach the end of their operational periods. Also in the future when customers ask me about Whirlpool appliances, I will be sure to tell them just how great Whirlpool is, how reliable they are, how great their customer service is and then quickly usher them over to Samsung, Frigidaire and Electrolux appliances. The department manager that had called Whirlpool for me has shared similar sentiments about future customer recommendations.

I bought my Whirlpool top loading washing machine 07-22-14. I so dislike the locking mechanism and will be certain to never, ever buy a machine with that feature again. It is so irritating to try to add something but cant because its locked so have to hold the button 3 seconds to unlock and start all over. If there was any way to get around it I would. I will stay away from Whirlpool products in the future and will be sure to check the next time I buy that the lid of the washer can be lifted when not spinning. Also, I do not like that it sticks on rinse sometimes and the only way to end a cycle is to hold the button and then start over with much wasted water.

My refrigerator was purchased in May 2014, and died in August 2015. Before it died, it produced a very loud, rattling noise for two days. Thus, the refrigerator cost me $100/month. It does seem, upon reflection, I would have been better off buying a piece of junk for $50. It would have lasted longer. Additionally, the so-called stainless steel started rusting all over the front surface, first popping up in one spot, then another. One year old, rusty and dead. Great job Whirlpool. Buy American.

We purchased this Whirlpool washer 5640XW3 from Lowes. It doesnt clean the clothes. Even if I run them through a second wash cycle, the clothes are still not clean. Called Whirlpool and they said nothing is wrong with it. I use HE detergent and load clothes around the agitator as directed in the manual. Still, clothes are not clean.

I bought my new Whirlpool Duet washer in April 2011 and the gas steam dryer in May 2011. In October 2011, the washer started to make a loud banging noise when starting the spin cycle. I contacted Whirlpool, and they scheduled a service call and stated that the washer was out of service. I told them it was and that I just bought it in April 2011. They said that the repair guy would need to see the receipt. Well, the A&E Factory service guy came out and said it was the bearings. Whirlpool only replaced the bearings with the whole tube unit and a few other parts. I was never told that all these parts would be mailed to my home, until I got a call from A&E about the tube being on back order. I was told that the part wouldnt be in until November 21, 2011, and it would take another week or more to schedule for a repair guy to come out. I called Whirlpool Executive Office (269-923-5000) and complained about all this. They said thats how it works--they ship everything to the customer and that there was nothing she could do about the back-ordered part. So I called Lowes corporate office and told them what was going on and asked if they could push Whirlpool into fixing my washer faster. About 4 1/2 hours later, I got a call from the assistant store manager; and they said that they would replace my washer with a brand-new one and would have it delivered in 2 days. Now, that was going above and beyond what I thought they would do. Just another reason why Ill continue to be a Lowes customer.Now, here it is, April 2012; and my dryer is leaking water into the drum. On Saturday, I went online and scheduled a service repair for Wednesday, April 25. Today, the 24th, I got a call from VIA that they would be out tomorrow and that I would owe them $120.00 for the service call as my dryer was out of warranty. Here we go once again, having to battle Whirlpool! I really dont give a dang what their dang system tells them about when I bought their product! I know when I bought it. And why did they keep telling me that Im wrong? They did almost to the point of calling me a liar!I called the Executive Office again and had to leave a message. Mark my words, I will never ever buy another Whirlpool product again! I will make sure that I tell everyone who I know at work and at home about the way Whirlpool handles their good customers!

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

I’ve had my Whirlpool Duet for 12 years and it has been a great one. I’m a mom of three sons, all of them wash their own laundry!! Lots of loads are done weekly and it cleans well! We leave the door opened after it’s unloaded so the tub will dry. Every few months, I put a tab in it so it will clean out all of the buildup. I don’t get the “front loader smell” that way.

My husband and I purchased a Whirlpool French-door Refrigerator in Feb. 2014 from Best Buy. We did not purchase a warranty through them (BIG MISTAKE) because everything we heard about Whirlpool was positive, at least through friends and family. 1 year and 6 months later we have NO freezer and their warranty expires a year after purchase date! I called the company and they are no help at all! From all the comments I have read on here, there are few positive results! From now on I will be checking all reviews before I purchase a product again and WILL NEVER buy another whirlpool product again!

Bought a Whirlpool Refrigerator Gold Series on 11/04/2014. It stop working on 6/25/2014 when I called customer service to report the problem. Received the visit of 2 serviceman on 3 different occasions and still dont know when the refrigerator will be fixed. What should I do?

ET8AHKXRQ00 - Contacted store where purchased brand new in box, also contacted Whirlpool Corp., was told no repair nor replacement could be offered. Paid $1,500.00, freezer still works but lower box stopped exactly 7yrs after manufacturing date and purchase. A lot of $ to pay for a refrigerator that costs more to repair than large purchase price. I am extremely upset with this situation and brand.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

I purchased a brand new Whirlpool Cabrio Washer from Sears less than 5 years ago and am junking it! It has all the same problems everyone else has mentioned. I have had it serviced for faulty motherboard, unbalanced tub, broken lock mechanism. It had rusted out on the inside. Clothes are never clean and it constantly becomes unbalanced in spin cycle. We have to stop and rebalance every single load 3 or 4 times--or more if trying to wash a set of sheets or two or more towels. Cant leave the machine unattended for even a few minutes. I might as well be hand washing on a scrub board at the edge of a river! Waste of money and Whirlpool Customer Service wont say anything but should have purchased extended warranty! What a load of crap from what was once a reputable company that used to make a reliable product. WARNING--NEVER BUY A WHIRLPOOL WASHING MACHINE!!!!!

I purchased a Whirlpool refrigerator in Aug. 2012. On Mar. 4th, 2013, the repairman said the compressor was no good. They will not give us a new refrigerator but will put a new compressor in. What a bunch of crap. I will never buy Whirlpool again. I have had two GEs and never had this happen.

Yesterday, my DC premier refrigerator purchased on 22.12.2011 suddenly stopped working for a long time, and the inside light automatically went off. All food, vegetables, and others are damaged and rotten. Now we are scared to keep anything inside this for huge loss and health problem. Kindly rectify this, and do the needful at the earliest.

Ice maker has stopped making ice on several occasions. Also when you try to get ice out of the door dispenser, it will continues to release ice but will not go down the chute and when you open refrigerator door it spills out all over the place. Getting ice other than from the door is no easy task. I have taken to putting a bowl under the ice dispenser. Interior of refrigerator is not user friendly for positioning items. Bought in a hurry back in 2017 and have regretted it ever since.

The only thing cheaply made is the push latch on the dryer. Both are pricey for what you get, I thought, though they were the cheapest Lowes offered. We have had the pair for a little over a year. So far no real problems, though we really do not like the latch door. You have to slam the door to get it to close. To do it over we would probably have shopped a little longer and for the same money got a better deal.

Whirlpool Washer Front Loader - Ripped off! It cost $250.00 to repair; the serviceman was at my home all of 15 minutes. The below or otherwise known as the rubber seal was ripped up and caused my washer to leak water all over the floor. I washed a load of laundry, 1 item being my 2-year-old granddaughter’s pants that had a 4 zipper in the pant leg. The serviceman suspected the damage was done by the zipper. So how many of us wash clothes with zippers?!I called and ordered the part from Sears thinking this was possibly something we could fix ourselves, only the part was on back order and would take a month before it was in. Therefore I looked online and could purchase the part, delivered for $91.00. I called for repair service to ask them about it. He said they could be difficult. It would take him about an hour to put it on. Guess what, it was on in 5 minutes. Now, Im even madder because I know I could have done this myself. Whirlpool! Oh yeah, I forgot to mention this was 1 and a half years old; we’re a family of two, no warranty. Think people, we’re getting ripped off.

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

You have to take into account that this microwave doesn’t heat up as others I’ve had so even if the instructions call for something to be cooked for 5 minutes, you have to add at least 2 minutes more. If not it would be undercooked.

Having serious health issues with both our washer and dryer. I believe there should be an urgency and more serious resolution. Our washing machine is getting clothes trapped and producing friction causing excessive and heavy smoke from the drum. Our dryer has a random bolt/screw in the drum that catches and tears clothes. Although this doesnt happen on every cycle. It happens enough that it should be investigated, repaired and reported to Health Canada. I contacted Whirlpool on September 15th 2015 with my concerns. Nothing is being done! Ridiculous. WASHER Serial: HL23299429, DRYER Serial: M24507313.

Just bought a Whirlpool stove (WFE540H0ES) from Home Depot. Oven gave off so much heat around the handle that I burned myself opening the door... Tech came out said it wasnt supposed to do that. Called into Whirlpool to get clearance for a replacement and corporate says no to the replacement because that is normal. Thats BS! If that is normal DONT BUY A WHIRLPOOL!! BTW... They are owned by Maytag.

My elderly mother purchased a Whirlpool Washer Mode Number WTW4955HW1 in November 2020. The washer has had nothing but problems. It leaks, vibrates and moves on the floor. My mother called Home Depot to see what she needs to do, and they said once they deliver the product it is out of their hands. Had our first service call in May 2021 by an authorized service and he said they should sell this on eBay. It is a horrible product, he said there is nothing he can do. Had a second authorized service in June 2021 and they said we needed a new tub which they ordered, and he said this will take up to 2 months, they also said to do only small loads and only use the deep-water wash and deep water rinse. After the technician left the agitator now comes apart. Would not recommend this product to anyone and I would never buy anything at Home Depot because they do stand by the products they sell.

Our double oven was part of our new home purchase so we really didnt have a choice in product. Brand new. Hardly used. The control board replaced because it went bad 2 weeks after install. After one use it had it replaced and it went bad again. Used it once and again same thing. My mom unaware of the issue used the self cleaner as a favor. Well things went really bad. Because the temperature of the self cleaner was too much for the oven and explode and the inside glass shattered. This is not a product that you would want in your home or would recommend for anyone to buy. They do not stand by their product either. Please do not risk your familys life.

It looks like I have the exact same problem as everyone else. Purchased an Energy Smart Whirlpool water heater at Lowe’s. Now I need a new controller. Hope they send me the non-catching fire type of controller.I am going to predict that the company will provide a response that says something like” “Hey, we really want to help you get your hot water back! Just contact us privately so we can discuss this without everyone being able to see what we tell you to do.” So far we are just out of hot water while we went through their diagnostics. They told me that this often happens and the best way to fix it is to let the hot water run in the shower for 20 minutes, then hold down the reset button on the controller for 5 seconds, and do that every time I experience this problem. I hope mine doesnt catch fire. Fire is bad.

Never ever go for Whirlpool. It has the worst customer service. We brought an oven but accidentally we broke the inner oven plate. We called up the customer care person on 18002081800 and tried asking him the dimensions of the plate pr at least how we could reorder it. He never listened to us. He just got our details. Said that technician will come at 11am tomorrow and disconnected the call when we were trying to explain what our query is all about. Is that all the respect a customer deserves!? Is that how whirlpool trains their service people!? He doesnt even have the basic courtesy to listen to the customer, I wonder how was he even recruited as a customer care person. If you want at least your basic respect, please DONT BUY WHIRLPOOL.

I completely forgot that I wrote a review on our Whirlpool hot water heater model FG1H5040T3 Nov in 2010 until I received an email telling me how many people read my post. Surprise, Surprise guess what we are having problems with again. You know how nice it is to have hot water anytime you need or want it. Well, not at my house. The hot water heater worked for about a year (Im probably being nice with the time here). Heres our problem now, once the water heats up the pilot goes out. It will not stay on. Ive noticed that if its full the pilot light will not come on, so we have to run some water to be able to light it. Well I called customer service, a waste of time. The guy told me that my heaters warranty expired last year and his suggestion is to go buy another heater. REALLY! All I wanted to do was order a part for it. He did send me an article with suggestion of things to check. Sorry, we already did everything in the article, another waste of time. It seems we are not the only ones (model #) with problems with Whirlpool. Whirlpool used to make good products but its not anymore. I will NEVER buy another Whirlpool product again.

Our 4-year old Whirlpool microwave suddenly stopped heating. We thought that we forgot to push something so we tried again to start it. This time, it started to spark. We bought a new microwave oven and foolishly bought another over the range Whirlpool microwave. This was about 1 1/2 years ago. The second Whirlpool microwave oven stopped heating as well. F7 came up on the controls which meant that the magnetron failed in this second microwave as well. We called Whirlpool and they said they would only repair it if we paid for the repair which would have cost almost as much as a new microwave and maybe more if other parts were involved. Next, last year, 2012, the pump on our Whirlpool dishwasher broke and once again, it was too expensive to repair it. We had to buy another dishwasher so we bought a Maytag, not knowing that they were made by Whirlpool. I guess we will have to wait until that guarantee is up before that also breaks. Also, last year, our Whirlpool washer pump broke and that cost us a few hundred dollars to repair.From the complaints that I am reading from people about their Whirlpool appliances, it is seems that their products are made to last just until the warranties expire. We should start a class action against Whirlpool. On many sites, I have read numerous complaints about Whirlpool products, the majority about the magnetrons in their microwave ovens breaking during and shortly after guarantees run out. They should not be allowed to get away with this. BBB, Consumer Affairs, where are you? To the many of you who have been burned by Whirlpool, I hope you have contacted the BBB and Consumer Affairs and maybe even the Attorney Generals office in your home state.

Purchased in Nov. 2013, by March 2014 noticed water leak on floor, after 8 service calls in 3 months it was deemed unrepairable By Whirlpool. Got a new fridge in June 2015, no cost to us, but have had 2 service calls already for the same problem. The first leak damaged our kitchen floor, and the ceramic tile that we have is no longer made so we have had to file an insurance claim on our homeowners to pay for repairs. I would never buy any Whirlpool product again, or buy from the local company we bought the original fridge from.

Whirlpool 2 Cu. Ft. Stainless Steel Over-the-Range Microwave - My wife and I have just remodeled our kitchen and we bought all the Whirlpool appliances, fridge, stove and microwave. We have had them for about 3 weeks now and now the display on the microwave just stop working. I just cant believe this. Its going to be a real pain now to remove this and replace it. Has anybody else had this problem and I wonder if its even covered under its warranty.

Bought this side by side, Whirlpool with ice maker and water dispenser in April 2013 at Home Depot. From the beginning, we have NEVER been able to get any chilled water out of the refrigerator. Sometimes the water is even warmer than the water out of the tap. Repeated attempts to fix and now Whirlpool tech Tom, told repairman, sorry this is normal, no refrigerator can guarantee temp of water.” Ive NEVER had a refrigerator with a water dispenser not chill the water much less, come out WARMER! HORRIBLE DESIGN & BAD COMPANY POLICY! Will NEVER buy another Whirlpool product!!! Now its dripping water inside fridge! Model #: WSF26C2EXW01 Ser#: HR30821156

Do not buy a Whirlpool fridge unless you like the sound of knocking every time it starts up. This has been fixed twice to no avail. I read about this before buying but thought it was an exception when it happened. Not so, it will happen to you & their fix will not work. Beware & heed this advice from someone who didn’t & not has major regrets. There are many other brands, buy them.

I purchased top load washer and dryer from Lowes last week. When I was washing clothes the first time 12/4/18 (the day Lowes delivered) I washed in quick wash setting, machine was showing me all stages of the wash on the progress lights. It took about one hour for one load. Today 12/11/18 I spoke to your customer service associates Trina regarding the issue with my top load washer wed4815ew1 serial m82572023. I was told a technician is schedule for repair tomorrow. I try to quick wash two loads, washer progress light only went to wash mode only. I had to press start/pause, select drain and spin to remove excess water. I started 8:30 am and finish around 1 pm. I was waiting for the cycle to finish, twice all progress stages light went blank. I have no idea when it will be done. Machine made noise, not spinning, no water in it. The dryer wtw4816fw2 serial c84621285, I dry at energy prefer setting, when the clothes was dry, dryer continue without the buzzing signal to stop. I had to keep watch of the time and turn it off manually so it not energy efficient when I have to monitor when clothes will be dry.

We bought our new Whirlpool Cabrio Washer & Dryer combo from Lowes on the north side of San Antonio, TX, for delivery when our new home was completed in Blanco, TX. Delivery & setup went smoothly. But it wasnt long before we both noticed something wrong with the washer. What was supposed to be one of the quietest washers on the market was far from it! -- loud grinding & thumping noises when the spin cycle would kick in. Whirlpool service dept was called and a repair tech was dispatched - 4 TIMES! The tech from Appliance Science spends most of his time on his phone talking to tech support, and has pretty much changed out parts at will! The motherboard, the pump, the clutch, the splutch have all been changed, to no use!We still experience problems with the washer NOT spinning, or only spinning for a short time, and the clothes still soaking wet! Its a good thing the dryer works well, because the washer is a dud, and we cant do a damn thing about it! Weve been told by Whirlpool service that since we have a repair warranty, we cannot get a replacement washer because we dont have a replacement warranty. Ive never heard something so ridiculous! Color us highly dissatisfied in TX!

We purchased a Whirlpool water heater at Lowes for $1100.00. Four years later it isnt working. There are no parts to fix it available at any store in Dallas, TX. We had to call the company. They made us pay the overnight shipping fee for the part. Then the part didnt show up. When we called to find out why isnt the part at my house, they said they found out FedEx doesnt deliver on Saturdays. No one ever called to notify us of this, instead the response was that they would use it as a coaching lesson for not notify the customer. We have now been without hot water in the middle of winter for 5 days. We have no idea when the part will arrive and if it will even fix my defective water heater. We will never buy another Whirlpool product and I strongly encourage anyone who reads this to not buy Whirlpool. They dont stand by their product and have horrible customer service.

We purchased a Whirlpool gas range on 12/3/11. It was to be delivered later that month and days before delivery we received a call the stove was damaged. They asked if we wanted it and could get it at a reduced price. We said no, we wanted a new one and that one was delivered on 1/4/12. This stove has had many service calls to fix the ignite for the oven. The ignite and a circuit board for this problem has been replaced many times. The smell of gas in the house is terrible from the many times you try to light the oven. This problem has happened many times when a family event was going to be done (Thanksgiving, making Christmas cookies). It is also very poor advertisement for the company and stove to have this happen when there are so many people around. They will have a tendency to spread the word by mouth. PS: When we called (12-13-13), the woman stated after 4 calls for the same thing there should be a replacement or a refund of money (All the calls have been for the same thing OVEN IGNITE and GAS SMELL).

I bought a brand new Whirlpool fridge early June with the extended warranty to have it shipped on my moving day on June 18. The team delivered and installed the fridge and told me to wait 3 hours before plugging it. I went and spent over 300$ in groceries only to find out the fridge does not work. I waited 24 hours, still not working. I had to wait until Monday to call the customer service because it is closed on weekends. I had to throw out all my food and order food all weekend which incurred an extra 200$. I called Whirlpool on Monday and was told a technician would only come on June 30th. 8 DAYS LATER!!!!I did some research and found a certified whirlpool technician myself who was able to come the next day only to find out the fridge has no gas and this is an assembly defect - WHIRLPOOLS FAULT. Whirlpool would have to send me a brand new fridge (These fridges are NOT TESTED?!). I was asked to call to arrange the exchange, I asked for compensation as I have already spent over 500$ and now would have to wait another week with no fridge and they refused to compensate....They told me I would get a call in the next 48 hours to let me know when I would get the new fridge and 3rd day later, still no call.I received a call on Friday to tell me they approved the exchange...Really now and would have to wait another week. That is over 2 weeks with no fridge, I sent a private message last week to Whirlpool, no answer, I spoke to customer service twice, they cant help me and do not want to compensate me. I have never been so frustrated and mistreated by a supposedly « reputable » company? WORST PRODUCT AND CUSTOMER SERVICE!!! DO NOT BUY!!!!

I am very unhappy with this Whirlpool refrigerator model# GX5FHDXVQ 04. I bought this model in October 2011. You have to push the left door to close it and if you dont then the fridge will stay open. I had a Whirlpool tech come to fix this door problem so this is what he told me: 1) You have to push the door in order to close it properly; 2) Before closing the left door, I should first open the right door (losing energy); 3) The gasket will break very fast; 4) Buy a three-year protection plan because you will have to use it; 5) The freezer is very uncomfortable. In the bottom drawer, you have to fit your stuff. If you put your freezer stuff in a drop higher, then you cant close the drawer, so I am losing space; 6) Sometimes when I fill up the fridge, I move the temperature to #5. After a day, the top shelf back stuff will freeze and the front stuff will stay on fridge temperature. Yesterday, 4-18-2012, for the second time, the freezer gets a sheet of ice. Repairman will repair it but who knows. This fridge looks to me like a lemon. The height is 70 but listed as. I rate this fridge with a CCC.