This new Whirlpool washer hasnt worked from day one and the company wont do anything, they wont even answer me, I will never buy one again, all the same problems everyone else is having, Im just waiting for a lawsuit.

This is the worst washer ever. I purchased this washer (Whirlpool Cabrio Washer Top load) brand new in the box thinking it was a great price and a good deal. Worst choice ever. I have been so disappointed in this product. It is very noisy which is something I have learned to live with. It doesnt even get simple stains out. I have tried every load combination and change detergents and stain remover a couple of times. Most time I have to soak stains again and again and then wash several times and most times it simply doesnt clean clothes. It leaves detergent residue on dark clothes so of course I end up washing those again as well. The towels and sheets turn into mushrooms in the bottom of washer.

I contacted Whirlpool on 3 separate occasions. Each time they told me to have the plumber call them so that they could determine what the problem was. Each time he was able to get the water heater going again, but it would only operate for about 3 months and then it would go out again. To date, I have incurred $245.00 in plumbers service fees. My last call to Whirlpool was on 5/14/2013. This water heater was purchased on 1/25/2010 at Lowes in Evans, GA. It went out over the weekend, but the plumber was able to relight it. When I called Whirlpool on the 14th of May, I was told since it was working now, there was nothing they could do. I am tired of dealing with this issue. They wont stand behind their product.

DO NOT BUY THIS MACHINE. Mine is less than 2 years old. First one month after warranty expired, the clear lid cracked...$350 to replace! Then a few days ago a rusted circuit board came apart and jammed up my washer. This should NEVER happen. I contacted customer service and they told me that they are not covering this problem and that the service call is $175 and cannot estimate the repair cost. They also could not send a repair person out for 5 days. The washer has not been repaired yet so I do not know the entire cost but it will be expensive!

A factory authorized technician came out this morning and repaired the washing machine. The bolt had come off of the pulley, which then fell off and burned through the guard, and then burned into the insulating on the bottom. The technician said this happens frequently. All that needs to happen is to have a Loctite bolt holding the pulley rather than a plain bolt which comes loose with the vibration. All Whirlpool had to do was spend a couple cents more for the proper part which would avoid potential fire! I should not have needed to have had my home put at risk, needed this service call or pay all that extra money because of their poor workmanship and design failure. This should be a recall item, and all costs incurred by the consumer should be covered by Whirlpool.

Lets just say Im not surprised by all the negative reviews on here. Im just one of many in the fishbowl! Been without a fridge operating for 6 weeks and still waiting for action, been on the phone with them everyday and no resolution. Although the service technician/provider is also not cooperating but my word, they wont buy me a new fridge of course and only offer a simple 50$credit and nothing else. DONT BUY WHIRLPOOL. Have had nothing but troubles with 2 fridges now!!!

Weve owned this refrigerator for about 6 weeks now. It is a 23 cu. ft. model with a bottom freezer. It is working great, and we have no problems with temperature control in either the refrigerator or freezer sections.

Own Whirlpool GB2FHDXWS04 refrigerator for 14 months. From the beginning, the ice maker made gross tasting ice and never got better (had to start buying ice). Then a smell started coming from the fridge every time the fan came on. We called before the warranty was up and talked to Whirlpool, and they said that we must have put something smelly in the fridge that caused the plastic to absorb the smell (which we didnt). They told us to put baking soda in and change it everyday. No change. They kept telling us there is no way it could be giving off a smell for any other reason and if they sent a tech out, we would have to pay for it. Trying to intimidate us until the warranty was up. Then after a month or so, the bottom mount freezer starts leaking water all over the wood floors every 3 days. At first we turned off the water line, but then realized it is coming when the freezer defrosts. One good thing, the freezer, from the beginning, knocked really loud and now that its leaking it doesnt knock. We spent $1,200 just over a year ago and will probably have to go purchase a new one now. I will tell you it will never be another Whirlpool product. Whirlpool has not apologized or done anything but say, Now your warranty is up, you should have bought the extended warranty. Great customer care! With all these same complaints, you would think Whirlpool would figure the problem is their inferior product (which they know) and actually take responsibility.

Bought this Whirlpool Cabrio washing machine 4 years ago not knowing it was a low level water washing machine. A man would have had to design this piece of crap. Not only does it not clean the clothes because the agitation on it is as slow as sloth. On top of that the clothes tie themselves in a knot when finished. If you don’t want the frustration of clothes washing, I would highly recommend you not buy this type, if you enjoy cussing then this machine is for you.

I have a Whirlpool AccuBake gas range. I started by contacting my local repairman because my stove was out of warranty. The first company came out 3 times and replaced three parts, which didnt work. The cost was $297.00. I originally paid $598.00 for the stove. After they deemed it non-repairable, I contacted Whirlpool. They basically said it was my fault for not buying the warranty. I then contacted the BBB. Anne ** from Whirlpool contacted me and had another Whirlpool service tech come out at no charge to me. But guess what, they deemed it non-repairable too. Its a shame that companies no longer stand behind their product. Its very apparent that this is a manufacturers defect. They should replace the stove.

Whirlpool Cabrio Washer WTW5000DW - I have owned at least two other washers in my life, and I just recently bought a new washer/dryer set at HHgregg. Was told they are doing away with agitator washing machines in the very near future so this is my first experience with a top load agitator-less washer. This thing is AWFUL!! First of all it took a minute to get used to the weird popping, grinding noises it makes while going through the cycle (which I might add seems to take FOREVER). The other thing I hate about it is there is no way to add the fabric softener at the start of the wash in this model unless you have a downy ball of which I have yet to find at my local dollar store or even the KROGER??? So I run back and forth trying to catch the rinse cycle to STOP the machine (wait I might add) and then add the FS manually.BUT THE ABSOLUTE WORSE THING is - my clothes come out with SPOTS that look like lint all over them, and they wont wipe off unless you have a wet rag to do it with!! AND YES - I have cleaned this washer TWICE already since January with the very expensive AFFRESH. I wear scrubs and they are solid colors, so it really shows up and I have to wipe off every pair EVERY day before I put them on then roll a lint brush down them. WHO HAS TIME FOR THIS??? This is on my SOLID colors which is easy to see, I can only imagine the GUNK that is on the rest of my laundry!!! I dont feel like my laundry is getting clean at all!! I am divorced and money is tight - I paid around $500 buck for this piece of crap. I am already seriously thinking of getting me another one - the OLD tried and true kind with an AGITATOR! And yes I am ANGRY. Can you tell??

The door can be slightly open on the model GSC25C4EYY02, and the alarm will not register. Ive come home on too many occasions to find the food no longer at a desirable temperature. Im very bummed about this refrigerator choice. The refrigerator door open alarm is useless.

Remodeling kitchen. On Sept. 2017, bought new Whirlpool microwave mod# WMH5352OCS, Actually put to use on Jan. 2017, by Nov. 2017 started getting open door errors by late Dec, 2017 completely quit working. From what I have been reading they barely make it thru the warranty period. Maybe they will run longer if one doesnt register the appliance. Especially with the crappy service for the ones that tried to have it repaired under warranty. I purchased it at Costco online, my next complaint will be to Costco, hopefully theyve gotten more complaints and pressure Whirlpool to stand by their product, NO MORE WHIRLPOOL FOR ME EITHER.

We purchased a Whirlpool Gold Induction range, model#WF1910H0AS0, from Lowes Home Center for ~$1700.00, about 1.5 yrs ago. One night my wife was cooking dinner on the stovetop and she heard 2 loud pops and the whole cooktop went dead. We had Bobals appliances repair look at the range and they gave us an estimate of $800.00!! to replace the module board. The repairman said the module board had shorted out and burned. Thankfully my wife wasnt electrocuted. I contacted Whirlpool customer service, they said, There isnt anything they can do. The warranty is only 1 year. I also contacted Lowes customer service. They told me the same thing as Whirlpool, nothing they can do, 1 year warranty, etc. I have the part# of the module in the stove, W10390743, serial#31811552. After an internet search, this part # had been superseded, which tells me Whirlpool knows they have a problem. These ranges need to be recalled. I plan to contact the US consumer product safety commission to initiate a recall. Please inform consumers if they have this Whirlpool induction range with this problem, to also notify the Consumer product safety commission.

Informed that because washer was 1 year out of warranty. It was 2 years old. Parts were not guaranteed. Cost to repair $400.00 including labor. Maytag Store came to my rescue and it only cost $200.00. 2 years later, washer is not filling with water correctly. Have mixed feelings about repairing or replacing. If replacing, how to select a reliable washer. How do you select, if when we purchased this washer it was rated very high. Whirlpool does not help with any issue. They were extremely rude. Felt helpless dealing with them. Need a new washer and have no idea which brand to go with.

We bought a refrigerator Model# WSF26C2 EXB last June 2012, and it broke down! Our one-year manufacturer warranty did not cover for any food loss. We would not recommend Whirlpool refrigerator to anyone. We called at 12:30 pm and they could not send anybody out to repair the refrigerator until the following day. Bottom line is, there is no compensation with Whirlpool.

I purchased a Whirlpool® 4.5 cu. ft. Front Load Washer with Load & Go Dispenser in 2017. By August of 2020 the washing machine was no longer working. The machine would continue to fill with water and not shut off. The machine would then give an error of E01 and F03 and drain all water within 5 minutes of the wash load starting. I had a certified Whirlpool technician come and diagnose the problem for $99. The technician said these error codes happen ALL THE TIME on Whirlpool washers. The technician tried to replace the water pressure switch with no success. He then spoke to a corporate office and was told we would have to replace the motherboard for over $500. The total cost for the diagnosis and repair was almost the exact price I paid for a new washer just 3 years earlier. I will NEVER purchase any Whirlpool appliance ever again.

I bought the #1 rated Consumer Reports recommended Whirlpool Gold fridge 15 months ago (how convenient their warranty stops at 12 months). The control board has already gone out, lots of ruined food and ruined perception that Whirlpool made good products. I will avoid buying anything they make again. When repairman was taking it apart, I saw Made in China stickers.

My son purchased a Whirlpool washer and dryer as a Christmas gift on 12-24-10 from Sears. It didnt wash the clothes properly and I would have to rewash them. Also, it would not spin the cloths properly and the top would take forever to unlock. Then in July, I called for repair because the water would not spin out at all. It took at least two weeks for them to come out. Another two weeks to get the part they ordered then to find out that they also needed another part that was not diagnosed in the first place. After another three weeks had gone by and having to go to the laundry to wash our clothes several times, it was finally fixed. I continued to have problems with the clothes not getting cleaned. How can this possibly be an energy efficient product when you have to do the load twice? I am so grateful to my son for the gift but am so dissatisfied with the product. I rate this product 1 out of 5 stars.

I have had a plumbing company work on my Whirlpool water heater three times in the last two months. On the third visit, he told me all the problems customers have had with Whirlpool water heaters. I decided to call Whirlpool for warranty purposes. The unit is three years old. I was told that it was the gas valve, and I was given a free one from Lowes. After installing the new valve, it still did not work properly. After troubleshooting with a technician, I was told it was the orifice. I have had to do all the labor myself, and I dont know how long this is going to go on. I have heard Whirlpool will continue to give you the runaround (from the plumbing company and Lowes salesmen) and will continue to give you the runaround and not replace the unit. They are wearing me down. I have been without hot water for three weeks with no end in sight. I am ready to give up and just buy another water heater but certainly not a Whirlpool.

It does not clean as well as I would like. I have to wash the dishes before I put them in the dishwasher. It is also much too noisy for my liking. It has the pot wash and the dish wash. It has several types of cycles, long - short and it has a drying mode. My next dishwasher will be bigger so I do not have to run it every day. My next will be stainless. This particular dishwasher is nothing special but I have my eye on one with the buttons in the top of the door so nothing is visible on the surface. My dishwasher is getting older and I will replace it soon.

Whirlpool Duet - Steam cycle and sanitize on wash. Dryer is fast and automatic cycles actually work! Have had the washer 4 years and the dryer over 10. We like the Duet Washer because it had a steam cycle and a sanitize cycle plus it has a light inside that helps us see the laundry in our dark room or at night. Also we have been very happy with the cleaning - does a great job and gets the dirtiest clothes clean. The Fan Fresh feature and Delay Start are very handy especially for busy parents who may forget the laundry is in the washer.

My 3 door fridge is roomy, well lighted and well organized. I love the fact that when I open the doors, I can see everything at a glance. The freezer section is also well organized and holds plenty. Being able to get filtered water and ice in the door is convenient. The main reason I picked Whirlpool is that it is made in the USA! I want to support American manufacturers that employ my fellow citizens.

Whirlpool Cabrio Platinum Option - Very stylish. Well built - very solid and heavy constructions. Full features from quick wash to sanitary wash, very energy efficient, steam setting on dryer for touch-ups. Quick loads, etc. We were looking for a washer and dryer set that would accommodate large quilts and blankets and still have the flexibility to handle small and delicate loads, and be energy efficient. The Whirlpool Cabrio Platinum Option is solidly built and very sturdy. It handles small and large loads and is very energy efficient. Both the washer and dryer handle sheets and pillowcases without a problem. Wed recommend them to anyone.

Cabrio Whirlpool washer - I hate this washer. Had it for about 3 years now and it will not spin out and does not give a code. Called a service tech out and they cannot find anything wrong with it. The water goes out but will not spin. It sits on 20 minutes and does nothing. Will not buy another Whirlpool washer. Wanted a good washer and got a piece of junk. Will not recommend it to anyone else. Think Im going back to the old style.

I also fell for the Consumer Reports BEST BUY of the Whirlpool Cabrio set. The dryer has had the heating element replaced 2 times already in 3 years. The washer reads all errors, and the repairman said today, “dont bother fixing, buy a new SPEEDQUEEN.” With the Board going out, and also the faulty bearings--will NEVER buy anything Whirlpool again.

I am a fan of Whirlpool and I think the issues I have with this Duet machine is more because of the style but who knows. This is a front loader with lower water usage. It would have never gotten my sons sports uniforms clean. Never. The gasket around the front loading window frequently clogs so water doesnt drain. And perhaps worse, the drawer where detergent goes stays wet so it had gotten moldy and I didnt realize it. Now I remove the drawer after every wash so it can dry and I leave the loading door open as well. That just seems like a major design flaw and health issue.

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

On December 21, it became clear that I needed to replace our 13-year old Rheem water heater. We decided to buy one from Lowes, 36 miles away and have a handy man install it. He installed the new Whirlpool 50 gal gas water heater with a 12-year warranty on Friday, the 22nd, but could not get it to stay lit. He called Whirlpool to troubleshoot. They said it could be one of two parts and that they would ship the parts on the Monday after Christmas. He asked who would install and they recommended a local plumber. He called that plumber but they indicated they did not do Whirlpool warranty work and would have to charge.On Monday, I called Whirlpool and was assured the parts would be shipped that day for overnight delivery. I confronted them about the local plumber not doing their warranty work so they set up an appointment with a company called A&E for Wednesday morning. On Tuesday morning, I called Whirlpool to get the tracking number on the parts and was told that they did not get shipped on Monday as promised but would be shipped that day, arriving by the end of the day Wednesday, too late for the appointment for installation.By Tuesday night, my wife got on this site and was appalled to read the numerous identical complaints. I decided that Wednesday morning that I would hire a plumber to remove the Whirlpool and install another so we would not have a lifetime of problems from Whirlpool. The plumber installed a different water heater. It started right up and we have had no problems since. I got an R or RA number from Whirlpool which I think they only gave me because the parts had not arrived on time and I returned the piece of ** to Lowes for a refund. Lowes has a seven-day return policy of these.

August 10 2014, I purchase a new Whirlpool HE. Monday cant wait for the delivery of my new washer! Im ready with my HE detergent & 2 loads of dirty laundry. Tuesday, I want my broken old Kenmore washer back! My kids clothes came out dingy. Did a second rinse & spin but didnt help. Second batch had to be rewashed. Some areas were not even wet. Had to pause it to add more water to & again to rinse it. Plus I had to mix my softener into a cup of water to add it on rinse because I forgot the rinse ball, unlike the old washer where I add into dispenser & forget about it. So unhappy & dissatisfied.

My fridge is a French door-type with two doors on top and a pull-out freezer with a ton of room! There's water at the door and an amazing ice maker inside the freezer. Two drawers for veggies, fruit, meats/chicken. And a retractable shelf to make room for larger, taller items.

I purchased new and installed my heater in 2003. SN: 0253109845, MN: EE3J50RD0454. I started removing and replacing or cleaning heating elements in 2011: pretty good service. In 2015 I noticed black and brown water coming from the hot water taps. I opened it again, cleaned it, and realized anode replacement was required. That is when trouble started.I tried everything usual including 4 foot cheater bar, heating the coupling, impact wrench, tapping with a hammer, etc. Finally found a 700 ft-lb. pneumatic impact wrench on sale at Harbor Freight. After serious wear and tear on my air compressor and about 1-1/2 hours of work with the impact wrench, I got it out. The threads were messed up some, but I did not look close. I had to put the 1-1/4 inch head back in to return it to service while I found and ordered an anode. Could not get one from Whirlpool and could not buy one in Lowes where I bought the heater.The surprise was when I cleaned the threads to put the head back in, I had to use almost as much time and torque to get it to stop leaking as I did when I took it out. Then, when I did try to install the new anode, it required to same effort. Conclusion, There was some kind of imperfection with the threads in the coupling that messed up the threads on the initial installation of the anode, which made it nearly impossible to remove. Whirlpools quality control stinks. The next one will NOT be Whirlpool.

This dishwasher is disappointing. Very noisy. Water consuming, and does not clean dishes properly. In addition not much options with timing settings. There are just few setting options and each take long time.

Purchased Whirlpool clothes washer Cabrio Platinum about one year ago. Never sufficient water to clean items. Appears that there is no way to add additional water to ensure that items are cleaned. Many items come out dry and still soiled.

I purchased a washer from Whirlpool through Home Depot on August 7, 2014 and on Dec 31st, 2014 the washer broke. I called Home Depot and was told to call Whirlpool since I was still under a year warranty. After numerous calls I was referred to Advantage |Appliances, a company that provides repair services for Whirlpool. After a week the technician showed up and briefly inspects the machine to conclude that there were two problems with the machine: The controller is defective and there might be another problem since the water is not draining. An order was placed for the part and another week went by with still no part. I called the corporate office only to hear that it might take 5 to 7 days to receive it. In the meantime I had laundry piling up. I was forced to go to the laundromat with one arm in a cast and a painful lower back. I finally received the part on Friday and the technician arrived on Saturday to install the part and then announces that she was willing to fix the water pump but had to get paid in cash since this was not included in the warranty. Now mind you! This woman knew about the problem from her last visit but made believe that it wasnt a problem. Advantage Appliance makes money by extorting their customers out of money. This young lady stood there without blinking asking me to pay her $89.50 to do the job she was suppose to do in the first place. I purchased an extended warranty from Home Depot only to find out that they would not be able to do anything since I was still under warranty. I have never been so angry and want Whirlpool to take responsibility. I am sitting with a washer half full with water and no one is stepping up to do something! Whirlpool is disgusting! The corporate office was not friendly or nice about this situation. They dont care! Why do businesses like Whirlpool get away with this? This is not acceptable.

We purchased Whirlpool AquaLift oven from Lowes 10 months ago. Since then, I dread each time I use the oven because I end up cleaning it by scrubbing and using different products because AquaLift cleaning is a scam. I have arthritis in my joints especially my neck, so cleaning it by sticking my head inside is a nightmare for me. I will try to call the company and see what is going to happen. I read that someone is suing Whirlpool for this product so hopefully they will recall the product or refund us if we return it.

Whirlpool Cabrio washer w103386894 - I have had nothing but problems with this piece of crap washing machine. Either the clothes come out soaked at the end of the spin cycle, or it gets stuck in a cycle and repeats. It makes so much noise you can hear it through the whole house. It is less than three years old and now it is leaking water. I had a base model Sears Kenmore that I had for over 12 years and it died from old age. This Whirlpool is pure crap, do not buy.

After many phone calls and letters to Whirlpool about the AquaLift cleaning system in their new stoves, that does not work at all. I finally spoke to someone at the corporate office with a brain! I am happy because Whirlpool refunded my money and removed the stove. That was the outcome I was looking for as this new steam clean thing of theirs does not work on a dirty oven. Hopefully, they will work on improving these stoves and restore consumer confidence once again.

Bought a Whirlpool Freezer on bottom in Feb 2012. Its December 2015. Only had gotten a 2-yr warranty. Wished I would have gotten a longer one. About a yr ago the freezer started leaking water all over the bottom of the freezer which turned into a sheet of ice... then leaking water all over the floor. Now there is a knocking/clicking noise coming from the back of it. This product is only 4 yrs old and Im praying it doesnt give out on us. That was an almost $2,000 purchase. I was hoping to at least get 10 yrs out of it. Never buying a Whirlpool Fridge again.

We bought the Whirlpool Cabrio forcibly when our 20-year-old top load whirlpool finally gave out. The Cabrio sucks. It does not get anything clean, it ruins clothes due to low water which creates friction, clothes are left wrinkly, smelly, pilled with lint, stinky and unclean. Ive had it for a year and Ive given every cycle a chance. It simply does not do what it is supposed to.The HE washers are supposed to reduce water, but having to rewash everything several times with load times up to two hours not only increases the amount of water used but increases the amount of energy used. Our electric bill has gone up $30-55 a month on average. This doesnt even account for the fact that Im spending nearly 16 hours a week doing laundry for a household of five. Thats nearly triple the time I used to spend on laundry. From having to pretreat even the most minor stains to spending hours trying to get the wrinkles out, and having to remove pills of lint, to the fact that one wash cycle does not get the odors out nor the dirt out therefore multiple cycles are required. I honestly think I might spend less time if I hand wash everything, I certainly would get them clean and deodorized. UNFORTUNATELY Government regulations force the consumers to buy HE washers so our choices for clean deodorized clothes are non existent. If I had to do it again I would buy a used non-HE washer knowing it would run another 10 years and actually get my clothes clean.

I wrote you about this oven. This morning, they replaced the thermostat and then wanted me to self-clean it again. Now it wont work again, so I called Whirlpool and wanted to replace it and it would cost me $1,070 extra. I told them that was not acceptable. I paid over $3,000 for the one I have. Now, I have to stay home again tomorrow so they can replace the same part again. To keep in warranty, I have to replace the part every ninety days if I want to self-clean my oven.

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

I have had my Whirlpool gold series dishwasher for approximately 10 years and it still does a great job washing my dishes. Recently, I found out if I forget to put a dish into it I would have to start the dishwasher all over again rather than it taking up where it left off. Also, the interior is badly stained and unable to clean it.

The Whirlpool microwave has been very reliable and efficient. I like its multiple functions, from heating up leftovers to defrosting meat and poultry, baking potatoes. All the functions are easy to use.

Bought this microwave combo oven from Lowes. Went to change the charcoal filters, as specified by the owners manual, and the top cover and the side cover fell apart when I removed the filter cover screws. After two appointments the service tech came out for about 5 minutes to tell me that only mechanical failure is covered by the extended warranty which I also purchased from Lowes.The problem with Whirlpool is that they make the top cover, and some other parts, with cheap thin plastic which crumbles when exposed to heat. The repair tech said, Dont worry. Ill see what I can do. And then he left. Actually the warranty booklet said wear and tear is covered in addition to mechanical failure. Its inexplicable to me why any manufacturer would use cheap plastic for an over the range product. And I intend to fight this until I get this appliance repaired under warranty.

Stainless steel rusted in under six months - Purchased all new Whirlpool kitchen appliances in March 2013. In July 2013 finish on both refrigerator doors and freezer door was covered with tiny rust spots. The finish was obviously defective. Contacted Whirlpool, sent photos and was told the damage was cosmetic and not covered by warranty since it didnt happen within 90 days of purchase. Ice make did not work right from day one. Finally paid to replace it myself and repairman said Whirlpool discontinued the style of ice maker I had because they had so many complaints.

Whirlpool Cabrio washer - Its been a month now and still the washer is not fixed. The repairman through Lowes warranty service is the worst by far I have ever dealt with. I had new transmission put on, still wont agitate and smells hot. The washer is only 18 months old, well taken care of. This expensive hunk of junk is worthless and the aggravation for all this mess is worse. I called Whirlpool 2 times. The first time, I got a call with the standard oh so sorry bit. Oh boy, that gets the washer fixed. Not. I blasted them and Lowes again. I have had it with this mess. The repairman is supposed to contact Lowes a week ago for replacement. He has done zero. I called Lowes to check. How can they sell this junk to customers who pay for this washer? They know it is junk, Lowes and Whirlpool, so do the right thing and recall the junker for refunds to consumers.

My Cabrio washer worked fine for approx 3 years. Within the last 9 mos there has been one repair/replacement issue after the other: pump, computer board, bearings, seal, etc. Whirlpool takes no responsibility. Worse purchase I ever made.

FRUSTRATION!!! It is unbelievable that even appliances have become DISPOSABLE! Where are the days of when our parents bought well made appliances that LASTED 20 years with NO problems??? There was satisfaction knowing that a purchase of an appliance was $$ well spent! These days it costs MORE to replace parts than IF you purchased a brand new machine! We purchased BRAND NEW Whirlpool Duet Sport Washer AND dryer in 2007. The washer has been repaired a total of 5 times and the dryer 3 times!!! IN A SPAN OF 10 YEARS! Are you serious?! With the $$ spent on warranties/ labor/ parts: WE could have purchased new appliances. What is WRONG with this picture? IT IS ALL about making money on REPLACING PARTS/WARRANTIES/LABOR!!! Forget the consumer that is spending THEIR hard earned money to buy the appliances initially. Short of going to a laundromat, the consumer needs to purchase a washer & dryer. So I guess it is a vicious cycle of REPAIRS/REPAIRS AND MORE REPAIRS!!!

I bought a Whirlpool washing machine, model WTW4855HW, and was I ever shocked at how noisy it was. The wash cycle had a grinding noise that was just too much. After 2 loads I sent it back and didnt regret having to pay the restocking fee. I just couldnt believe that with all the technology we have today, that they couldnt build a quiet machine. Im an engineer so I know there are methods through gearing, belts, soundproofing, etc, to produce a quiet machine. Remember the dishwasher of days gone by. You couldnt watch TV with the dishwasher going. Nowadays, you can stand in the kitchen and have a nice conversation with it running. The technology exists. As a matter of a fact, my old Maytag that finally went bad after 10 years was fairly quiet. So, if you dont have your washing machine in the garage or basement room where you can close the door, dont buy this machine! Bruce in Portland

We bought a Whirlpool refrigerator/freezer from Lowes 4 years and 11 months ago. It apparently sprang a freon leak somewhere... repair person cannot tell until they take it into their workshop which will cost $300 - 400 just to find! And then there is a strong possibility that the compressor is toast. I called the company and they were not willing to help out at all. Why should a refrigerator only last 5 years (technically less)? I am not buying another Whirlpool and am looking for refrigerators that have a longer warranty on their compressors - LG which has 10 years! Whirlpool cant do that????

My dishwasher is just under 3 years old. It has never cleaned well and doesnt dry well at all. I have replaced parts for the top rail 4x. I have 4 other Wp appliances and none are good. The plastic parts in these appliances are beyond cheap and yet they have no problem selling them at a premium. And they also do not stand by their products. Why in the world would you need an extended warranty to get you through 3 years? In other words they make crap and want you to pay them because their stuff is crap... Im done with Whirlpool.

I have purchased many Whirlpool ranges for my apartment buildings that I own and operate. They never give me a problem with operation or length of service. I only have to replace them when a tenant does something dastardly to them. My husband and I remodeled our kitchen and we purchased one for our kitchen too!

The microwave keypad is worn down after 10 uses making it difficult to read the pad. I just discovered the microwave was missing the front leg and they do not have a replacement part so I am stuck with a virtually new microwave that will not balance. It took 4 phone calls to their customer service department to try and sort out the problem. Poor product and extremely weak customer service department.

Whirlpool Washing machine Model WTW4800XQ1 - This machine ran fine for the first 6 months, even though my old machine took 40 minutes for a large load and this one takes an hour. Then, I had to call the repairman out and he said it was the fill valve. He didnt have one on the truck and said he should get it in within 3-5 days. Well a month later, I had to call Lowes again to find out what the problem was. They had him back out with the part within 2 days. Then, I had to call again. This time the repairman ran a test and found a bad spin motor, he had the part on truck. Third time to call and the machine is back to not spinning out properly. My old machine lasted over 14 years. Whats wrong with these new ones?

I do like washer to be efficient and quick at what they do.. I also like the way they are economical and use less water he energy economical it what I need.. I do like clean clothes. Right now I am using an ancient one and the sound drives me nuts..

I purchased a Whirlpool front loader as well as an extended warranty. The machine worked well for about a year and a half until i noticed rust patches beginning to form on the front of the machine. We contacted the retailer that we purchased it from and they suggested that we call the people that we had bought the warranty from. Unfortunately, the warranty does not cover rust, so we have to wait for it to rust out and just buy another one. It is only 2 and a half years old and is totally rusted across the front of the machine! It is extremely unsightly. This is the second Whirlpool washer that we have bought and the second one to rust out on us. I would never buy another Whirlpool appliance, and extended warranties are not worth the paper they are written on, let alone the amount that you pay for them!

After 2.5 years seal around door melted on microwave. Whirlpool Corp sent a repairman to do a safety check. Said unit was ok to use. Plastic seal on for area totally melted about 2 inches wide. Co. Had a recall about a similar problem but our serial number was not included???? Did not want to give them any stars.

I got the Cabrio Washer and Dryer set in December of 2015. By March of 2016, the heating element and dryer door latch had broken. Had to have those repaired. By June of 2016 and since, Ive had several repairman out to the house trying to figure out whats wrong with my washer. 9 times out of 10, it will not spin the excess water out and the clothes are soaked. Sometimes it takes me an hour to get the washer to go through a spin cycle. Sometimes the washer wont go into a cycle at all, it just makes a horrible noise (like its draining) and never does anything. It doesnt put out enough water in larger loads, so Ive had to cut my load size in half. It wont work on half the cycle options on the screen, only working on bulky or heavy. Wont wash on normal or quick wash or any of the others. It will make that same horrible sound and do nothing. Nobody can tell me whats wrong with the stupid washer and the repairman said he sees issues with Whirlpool all the time. He said save myself money and buy something else. But I remember a time when a washer and dryer would last for 20 years. What happened to quality products and craftsmanship. I am so tired of the new and fancy appliances that dont last and these companies that dont stand behind their products. Whirlpool you should be ashamed. I will never buy another one of your products. There should be a recall on these particular Cabrio units especially after all the horrible reviews I just read.

The company I work for bought a new washing machine a couple of months ago to make it easier for those that do the laundry here. The washer was suppose to be this great washing machine which has turned out to be the biggest piece of trash on the property!! Every couple of loads you have to turn it off and hopefully the computer in this Whirlpool cabriolet will reset so you can wash a load of clothes. You have a 50/50 chance it will work. DO NOT PURCHASE THIS MACHINE. IT IS THE WORST WASHING MACHINE IVE EVER USED!!

What a disaster! Within one year we had to repair the stove twice, the dishwasher and the fridge! Almost three years later, we are experiencing problems with two burners and with the fridge! The company does not stand behind its products. Avoid them.

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

I bought one of the top of the line Maytag washers and was very disappointed. It only lasted about 5 years and had to be replaced. The dryer I bought at the same time is still working. It is 15 years old.

I purchased a high-end Whirlpool dishwasher (WDT710PAYM) a few months ago thinking I was making a wise upgrade. Poor design and it wont dry dishes or properly wash utensils when theyre placed in the utensil rack on the door panel. The unit heavily condenses after using heat dry mode and large water droplets completely cover the top of the inside cabinet. Eventually, they all fall down into the dishes and you now have wet dishes again. The Whirlpool tech’s response was to scratch the cabinet plastic with a scratchy pad, smear rinse aid over the plastic cabinet and that should stop droplets from forming. Whirlpool’s customer service told me they shouldve never told me that and what I should do is be there during the drying cycle and open the cabinet door to let the steam out. This is completely ludicrous. Dont walk but run away from Whirlpool products.

Do not buy whirlpool water heater!!! It will only last 3 years.

When we bought our side by side fridge (model GD5RVAXVB02), the manual said to clean the condenser coils if you have excess dust and/or pet hair. We have both. We tried with the vacuum and with a brush but it is impossible to get to the coils because they run side to side instead of front to back. You can only get to the first coil in front. The rest cant be accessed from the front, sides or back. I called to find out how Whirlpool recommended they be cleaned and they could only recommend a vacuum attachment tool (8171579A) to clean the floor below the coils or a coil brush (4210463RW) that cant reach the coils! This design is meant to fail prematurely. They could have easily installed the coils running front to back so they could all be easily cleaned.

Our Whirlpool Cabrio Washer did a decent job for the 3.5 years that weve had it. Last week, it stopped spinning properly after rinsing, leaving the clothes quite wet. The repair person said it needs a new control panel and is not worth repairing. So, we have to buy a new one after such a short time. Very disappointing. Next time, well try another brand and buy an extended warranty this time. Buyer beware!

Bought this washer 3 months ago. Absolutely hate it! Leaves white film on my clothes. Have to run all washes through a quick wash to get the film off. Hammers the water through the pipes, causing the fittings to come lose and leak! The spin cycle practically dries the clothes leaving them so wrinkled that I have to dry them longer to get the wrinkles out. Waste of my time and MONEY!

It does not clean properly, if the dishes are not almost totally cleaned before putting them in the dishwasher. It has stainless steel inside, but the plastic holders have all had to be replaced. It is a large dishwasher that holds pots and pan. It is plain and has nothing outstanding to look at. Dishwasher are not meant to last any longer than 8 years, I have been told by a repairman. I will never purchase a KitchenAid, made by Whirlpool again!

I have purchased offloading washing machine in 13 Oct. Within three years it has given lot of problems. Every third month we have to call for service and spend lot of money. We had changed drain motor and condenser. Wiring is faulty. Machine will be down many times.

We have a Whirlpool Gold fridge that was manufactured in 2009. MOD: GS2KVAXS01. SER: HRY0570897 and it has not been cooling properly for the last few weeks. Some days it is fine, the next day not and we have had to throw our a lot of rotting food. We got the fridge checked out and were told the Electronic Control Box for the fridge was not working. My question is, why would a Whirlpool Gold fridge that costs $1800 or so have such a large issue with 3 years? Its practically a brand new fridge and Im outraged that a large part of the fridge is not working. I understand parts break and there is warranty but its pretty bad that after the warranty expires the control box would become defective. I have been a loyal Whirlpool customer and solely buy the brand and this break upsets me very much. Especially since replacing the part will cost me $400 plus labor, we are talking about a part costing 30% of the total fridge cost! That is ridiculous. I am hoping there is something you can do to rectify this, as a fridge manufactured by what I thought was a great company should not cause such an issue and I would like to continue to buy Whirlpool products but not if this is the case.We have called Whirlpool customer service many times to be ignored, berated, told I cannot speak to a supervisor and nothing will be done. Never in my entire life have I ever known a company so horrible to exist. I have had bad service before but this takes the cake. Plus, no company that I have ever dealt with would ignore you and not provide any discount or remedy. I cant believe this is a big brand with the way they carry on. You would assume they would be some one person owned company who doesn’t have a penny to spare. I don’t respect this company at all and expect a resolution because they are truly insulting in all the channels.

Ice maker will freeze up every couple of week. I cleaned it all out last Saturday and today, Friday, it was frozen up again.

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

Whirlpool microwave came with my new condo, and its as aesthetically pleasing as it is functional. Very easy to use, sounds are not annoying (as my last microwave was) and heats food quickly and evenly, as needed.

Cabrio Platinum Washing Machine - We received this washer and dryer set as a gift so I cant complain on the cost. However, it does NOT clean your clothes. Water smells at the start of each load, clothes are left with soap scum and several clothes have been ruined by oil stains!

GB2SHDXTS02 - Bought the Unit and an additional 4 yr protection plan. Shortly after the plan expired the plastic drip pan cracked and spilled water all over the laminate floor. It is still bucked from the water. Repairman came out and confirmed the crack, but we were without the refrig for a couple of weeks. Now the top doesnt cool, but the freezer does. Problem probably the defrost system, the fan, the control assy, or the thermistor, but I am too old to fix it myself. My fault for not checking ratings before I bought, but built in obsolescence is obvious here. Whirlpool used to be a good company, but I will never or will my family ever buy another appliance from them.

Cabrio top loading washer - I have had this set for 3 years. The first 8 months it was fine, then came all the rust. I had to go to the BBB and file a complaint as everyone at Whirlpool would not help. Last year they finally replaced the top, and now, its rust yet again. I rinse and dry the machine when I am done using it. The repair man said it was because manufacturers are not using primer and just one coat of cheap paint. What now? Ill see if I can get the lid off and sand it and use rust preventer on it. Never again, I should just junk this piece of crap and Whirlpool should shut down if they cant make anything worth our hard earned money.

We installed this furnace along with a matching 4ton a/c unit over four years ago. It was installed with a 3 zone computer controlled damper system to separately condition the three floors of our home. This furnace was ideal because it has a dual stage combustion chamber depending on how much demand there is. So besides being 95% efficient, the furnace can run at 70% or 100% heating capacity which saves on utility bills when the whole house doesn't need heat at the same time. It also had a variable speed blower which made start ups and shut downs almost unnoticeable. The blower actually ramps up to speed discreetly and adjusts itself according to the amount of back-pressure it senses. This allows it to respond to varying conditions as each of the 3 thermostats are calling for heating or cooling at different times. And yes here in St. Louis we have had days that require heat on the first floor and a/c on the third floor at the same time. The controller cycles between the two every 15 mintutes. All of these features make it ideal for our 2200sq ft three story brick home(four including the basement where it is installed). This furnace and control system along with new ductwork and dampers were able to replace the two old furnaces and a/c units originally in the home. We haven't had a single problem with it in over four years and would recommend Whirlpool Gold products to anyone I know. If I ever had to do this again in another house I would do exactly the same thing with exactly the same products.

I bought my house in 2009, and the previous owner bought this refrigerator in 2005. By 2012 The light and temperature read out went out. A circuit board had to be replaced. I have a home service company that I pay for yearly which takes care of the appliances. As usual, the fine print on the back of the contract said circuit boards were not covered. When I went online to purchase the part, the cheapest I could find it was $180. My service company said they would not cover it because they break down so frequently, with Whirlpool as the biggest offender. They gave me a discount and charged me $125 for the replacement. Whirlpool is making a fortune on these defective parts, which last long enough during the warranty period, and then you are on your own.In 2015, after the refrigerator was 10 years old, the compressor died. Hundreds of dollars of food spoiled. My service company said I was covered for the replacement, but I would have to wait 5-7 days for the part to come in. I was so furious that a refrigerator of this age would break down on me. The repairman told me he has seen these Whirlpools break down after 5 years. He said they are junk. When I was young, we moved into a new 20 story building in 1963. All the apartments had the same refrigerator made by Frigidaire. I lived there for 26 years. When I moved out in 1989, that refrigerator was still there working perfectly. It never needed a repair. I never heard anyone complain about theirs either. How is it that in 1963 a company could build a workhorse of a refrigerator, but in 2005, Whirlpool, a company in business since about 1911 makes this junk? I will never buy a Whirlpool product, and will tell the world not to do so as well.

Posted the following review of this oven on the Whirlpool website: How did this get 5 stars with so many complaints? Ive only used this oven once since installed last Sunday. It heated my kitchen up at least 3 degrees. I live in the South so evidently its not meant for southern summers. It does look nice but if Id known the fan blows such hot air out of the bottom, I wouldnt have chosen this one. Afraid if I use the self cleaning cycle, it will burn my hard wood floor. Probably why there are many complaints about uneven cooking and long to preheat since all the heat is blowing out of the bottom. I received an email saying it didnt meet their website guidelines and they wouldnt post it. Interesting?!

I bought at Lowes. The first one was sent back (doors stuck, suction cracked lining). Now the temps are not working in the fridge or freezer. All the food got dumped. Its sad. My old one lasted closer to 25 yrs. (and may I add up to ten children). This one has only been used by adults. I thought I could trust Whirlpool?! I sent info to local Lowes. We will see if theres any help.

My stove is good, I have gone through 2 refrigerators in less than 8 years and the replacement is having issues. Service is a joke, customer service is questionable but trying to assist but at this point will not recommend whirlpool products.

Have a Whirlpool side by side about a year and a half old. Fridge started getting warm, so when I contacted the Whirlpool co, they informed me and sold me a year warranty to cover what the problem is and anything that would go wrong in the next year. The warranty is through Assurant. After contacting them, I found out they could not have a repairman out for another week. Wasnt happy, but nothing I could do. They found out the compressor was bad, ordered the part which showed up the next day, but could not come out to install it for another week. Getting more upset. Put it in and my fridge was hotter than before. Called and they could not have anyone out for (you got it) another week. The new compressor was bad. Ordered a second one, came the next day, and they put a rush on the repair so I only had to wait 4 days this time. Guess what, it still does not work. Had to wait another 4 days for someone to come out. So tomorrow is the day. We shall see will it be another compressor and another week to put it in? I never heard of any company stretching a repair over a months time. I am so angry with Whirlpool, Assurant and A&E repair company; you just dont know. I would not recommend buying or going through these companies. This is very unprofessional.

Purchased a Whirlpool washer 14 months ago... however just unboxed the washer. Installed it in our new home. Now after just two, repeat, two months of use, there is water all over the hardwood floors... The front door seal is gone to the tune of $100 but what about my floors!!!!!! Im so discouraged after reading all the complaints that Im falling out of my chair. Seal design has been the same on most all their front loaders. DO NOT BUY A FRONT LOADING WHIRLPOOL WASHING MACHINE. YOU WILL BE SORRY YOU DID. Yes they look pretty. My parents old top loader washer lasted over 35 years without a repair and we washed clothes for four people.

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

Bought a Duet Whirlpool washer a couple of years ago. After about 6 months, it started to make a lot of noise like a jet taking off. Where we live there isnt a repairman thats able to come and fix it. So we would be required to have it shipped away to have this done. The washer was purchased at The Brick when we bought our new home. When we told The Brick of our problem we were directed to call Whirlpool directly - this we did and like everyone else we were given the runaround with no compensation to come. I will never buy another Whirlpool product again.

I purchased the 19 cu. ft. Whirlpool Estar refrigerator WRT 3595FYW on 4/28/12. Freezer began showing frost immediately. Repairman from Marcellas Appliance where purchased - (518) 381-1957, came to check it, put a sealer around the door openings of refrigerator and freezer. Frost continued. I called Whirlpool. They sent another repairman from EB Russell in Schenectady, NY, door needs replacing. Door was ordered and when received by them, the door was replaced on my refrigerator.In August 2012, frost is in freezer, on its roof, on the door daily. I called Whirlpool. I told them I wanted to remove it from my home. Whirlpools reply was, you have a repair warranty, not a replacement warranty. I was not advised of this when I purchased. Otherwise, I would have gone to Sears, Lowes, etc. On 8/16/12, another repairman from The Appliance Man, Albany will be here Monday. Its dishonest sale, replacement was advised possible by Marcella, that it was just a matter of course to get an okay from Whirlpool. This is not so. There is no replacement or return policy. Please help. Thank you.

Purchased this French door fridge with the freezer on the bottom in September 2017. Started having problems shortly after with the freezer not auto defrosting/ice damming on the evaporator unit in the freezer unit, which caused the fridge to warm up and food to spoil. Service came out several times and ultimately replaced the Jazz board 3 times, 2 harnesses in freezer, 1 Heater and the evaporator fan motor, with the same problem happening after a few weeks. Requested a replacement after the 3rd visit, but Whirlpool refused to back up their product. Sent service a few more times to no avail. Demanded a replacement once again. They sent a new service company out 15 months after our original purchase and they FINALLY deemed it non-repairable and are FINALLY going to replace it (turned out to be a broken wire inside the walls of the fridge, likely was like that upon delivery). So now we will have been put out for a total of 16 months for a fridge that cost >$1000. If Im spending that on an appliance I expect it to work properly or else be fixed/replaced in a TIMELY fashion. And the best part: they refuse to compensate us for any of the food that was lost due to a faulty product and very poor customer service! That was a lot of money lost because of their incompetence. If they had just replaced the broken appliance in the first place I would have been satisfied. But since they refused to do anything beneficial to remedy the situation, I will NEVER buy another Whirlpool appliance again. And add in the inconvenience of scheduling a time to be home for multiple visits to greet the repairman. Oh yeah, plus our time wasted defrosting our frost-free fridge with a blow dryer to buy us time until it got repaired. Buyer beware!

Found a crack under a freezer rack from sidewall to back wall. This has caused the refrigerator not to operate properly. Every appliance I own is whirlpool. Bought in 2005. Also bought another in 1994 that is working fine. What surprise me is having a crack in freezer wall. Nothing Whirlpool can or will do! Was a lifetime Whirlpool CUSTOMER. GUESS WHAT? FACEBOOK I GO. 3309 FACEBOOK FRIENDS.

Mind you, Whirlpool products that we have purchased in the past have been satisfactory, but gas hot water heaters, no! About four years ago we purchased a Whirlpool hot water heater that went out in a little over a year. After spending many calls and time, we found out that the HWH was on soft recall. Whirlpool credited our account, but this was to purchase another Whirlpool, which we did. We paid for installation. About 2 years later, it has gone out. Same problem. Lowes says not their problem. Whirlpool says it will pay for the part only. Plumber will cost 150-200 dollars. All the plumbers I have talked to will not repair them, then they are held responsible when it goes out! As a disabled Vet I cannot afford to throw 400-600 dollars away. And, Whirlpool tells me that if they give me an RA number to replace the HWH, it will have to be a Whirlpool from Lowes. Great! Whirlpool quarterly report looks very good. Mine doesnt look as good. What can be done about a poor working product? Or is this too big to fail? Let me know.

Whirlpool Refrigerator WRF736sdam13. Purchased from Lowe’s June 2015... freezing started in April 2019. Freezer bottom is not draining correctly and the bottom keeps freezing making it difficult to push door close. I have the extended warranty. This will be the 5th time on Monday, July 29 repair person will come out.I talked to Whirlpool and Lowe’s. The product cannot be considered a lemon because the problem continues to be “fixable” as stated from answering service when I reported the problem again. Customer service has been amazing up to this point. Anyone else have an issue with this model with the bottom freezing solid? Any suggestions?

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

Whirlpool Slide-In AquaClean Technology - My beautiful, modern oven is no longer. After 4 tries doing self-cleaning my oven was still dirty. I did have to wipe out the water (although I measured it) before I could take the scraper/sponge provided by Whirlpool to assist in the cleaning. Scraper bent - sponge disintegrated and I still have a dirty oven. Called service. My pleasant service tech informed me the water is only to reach 250 degrees! Really! My dinosaur of a Whirlpool cleaned fabulously! New technology has turned mine into an on your knees, scraping and broiling fool. Fool because I bought into the whole Aqualift Technology. We cannot use any kind of liner, etc. This slide-in may look great but the labor required to keep it that way is beyond this OCD person! So much for my efficient new kitchen. May the engineers who designed this technology be ashamed of this product. It is not even a self-steam cleaner!

I bought new and both have broken over and over. The oven takes forever to heat up. The fridges ice maker broke and then the defroster in the fridge side broke. Dont buy Whirlpool.

Dont even consider a Cabrio top loading washer. Wastes your time, money and insults your intelligence. I never use the deep water cycle but boy the machine does! Ive had loads that have taken hours to finish on the quick setting! Thanks Whirlpool.

The duet washer is just over one year old and started showing F25 code on screen. It had been making a really loud noise in the spin cycle. Last week, a really loud noise and then the loads wouldnt be spun. There was a puddle of water on the floor near the machine. We had a repairman out today and he stated that theyre repairing these machines all the time. He stated it was the bearing and that theyd been told that Whirlpool had installed bad bearing from a different supplier. I called the Whirlpool experience and after 4 minutes and 19 seconds, I actually spoke with a service rep. She said since my machine is less than one month over the one year warranty, Id have to call the extended warranty people. I asked for a supervisor and after 2 minutes and 38 seconds, she came in line and wouldnt budge from her story. They also stated that there are no service issues with this model washer. Extremely poor attitude and Whirlpool is doing everyone, whoever purchased a duet washer, a terrible job on these washers. At least, Ive now found out that there are a lot of other folks out there with the same problem. We need to get some attorneys to start a class action just like the mold/smell customers did already. Sad, sad day for Whirlpool as Id been a customer all my life.

My husband and I purchased this washer in August of 2011. Within 2 years the lid broke because of it a cheap plastic frame on a heavy glass lid. At that time I researched it and found many people with the same complaint. Whirlpool would not do anything for us but the company that we purchased it from did agree to supply the part if we paid the labor. We did this and replaced the lid. Well here it is just right at 2 years again and the lid is completely broken and the washer is unusable. There is no way to bypass the lid issue which makes the washer completely useless.I called Whirlpool again and was told there was nothing that could be done and that because there was not a recall on the product, they would not be able to do anything for me. We have purchased a new Samsung washer that received excellent reviews from Consumer reports and we will NEVER buy another Whirlpool product again. I cannot believe a company that old and as large as Whirlpool will not stand behind a faulty design and faulty made piece of equipment. It is very disappointing.

After purchasing 3 whirlpool items in the last 4 years and 2 of them breaking down a dryer last year, and my water heater today. I no longer have faith in your products. I am disabled and was a whirlpool customer, but after my recent experience with your failing products, I will not be purchasing any more! Its great your willing to send the parts for the water heater but, it costs $65 to have them installed. I bought from you because you had a quality item and obviously that is no longer true. Contact me if you still want me as a customer.

The stove started having problems about 5 months after I bought it new, it had a 1 year warranty on it so the first repair was covered but it begun to have the same problem a few months after the repair. By the time I contacted the company they told me the warranty was expired and ask if I wanted to buy another year of coverage for $300, of course I said no. I repaired it myself and once again it worked for a few months and now the problem came back. Will not heat up so dont waste your money.

Ill never buy Whirlpool appliances again. I purchased all new kitchen appliances less than 3 years ago. The range had electrical issues within the first year, which was extremely scary. Thankfully because of the warranty they took it back, reimbursed me for it and I replaced it with a GE. I absolutely love the GE. The dish in the microwave never stays on its track in the center. Its quite an inconvenience to fix it almost daily. The top rack in the dishwasher constantly breaks, drops down on one side. Random parts from inside the dishwasher constantly come loose and fall off. But the worst of all....my refrigerator has broken down twice in 6 months from the same issue due to no fault of my own. To give some credit, Whirlpool fixed it out of warranty the first time. However the same issue happened 6 months later and they are expecting me to pay for it. The repair company contracted with Whirlpool covers their parts under warranty, however different parts need to be ordered. I had to pay for these parts, a service call and labor. Whirlpool came out with a service pointer on this because they know its a manufacturing defect but are refusing to cover the cost. The representative I spoke to was nasty and inconsiderate but sadly the manager was even worse. DONT buy Whirlpool!!! I recommend GE, youll be much happier. Worst customer service and support.