This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

We have had our range for over one year. The main problem is that the large burners are in the front and the small burners are in the back. This means that when we are using the two front burners we cannot access the rear burners safely. (What country provided the engineering design for this?) One minor problem is that we cannot get used to the burner control arrangement. The outside controls control the front burners and the inside controls control the back burners. Our old range was the right control for the back burner and the left was for the front burner. Another small problem is that there is no back to the pan drawer. So, with the drawer full if a pan move when the drawer is shut it will be scraped off the drawer and fall into the back and becomes hard to reach to remove.

Purchased a self-cleaning Whirlpool oven - model number RBS245PRS06 at Home Depot. Spent extra for the self-cleaning feature. The oven had slight use and used maybe once a week. Cooked a big Thanksgiving meal and decided it was time to use the self-clean feature for the first time. One hour into the process the oven shuts off, no longer has power, and the oven door is locked and will not open. Called Whirlpool (talked to 2 levels of customer service), they wanted me to buy a $200+ warranty for another year of coverage!Researched online and talked to the parts people and this is a KNOWN defect. It happens frequently when using the self-clean feature. It requires replacing the Thermal Overload Safety Thermostat which costs $45 with shipping for the part. The service call is over $100 PLUS labor which can run even more. There are YouTube videos that show how to replace this fuse. The parts lady recommended NOT using the self-cleaning for this oven. Buyer beware. If you are in the market for a new oven do not consider this Whirlpool model. THIS PRODUCT IS DEFECTIVE AND WHIRLPOOL WILL NOT STAND BEHIND IT ONCE YOUR 12 MONTHS IS UP.

When purchasing a new home, the almost new Whirlpool double-door ice-dispensing stainless steel refrigerator came with the kitchen. This beautiful-looking fridge worked well for close to three years, but gave up the ghost shortly after its warranty expired; designed obsolescence perhaps? Problem was, it would have cost almost as much to repair as it would have to purchase a new fridge with a warranty. So, thats what I did, via a local big-box store. I bought a single door floor model, with the Whirlpool ending up as scrap, the whole incident leaving a bad taste in my mouth. If you have your grandmothers old fridge that still runs, keep it!

Have a warranty with them to get reimbursed for repairs for a year. Have had to use it twice now for the same part. Customer service told me itd take two weeks to get a certified repairman of their choosing to be reimbursed. Two weeks to go without a fridge is their solution and they have no other repairmen working. So I ask to speak to a supervisor and the representative tells me she wont transfer me out because thats the way it is. Paid out of pocket to get it fixed immediately instead of waiting.

Called 8/24/15 - spoke with representative about our two year old washer. Nothing Whirlpool can or will do.They have no other complaints about rust inside the lid and inside rim at bleach dispenser nor chipping of paint from lid. When asking the Whirlpool representative about the rust, he assured us there were no other complaints.This is hard to believe since our recent research clearly shows that other brands have had to replace tops due to rust. As for clothes not cleaning, no response to this issue. Whirlpool has not trained salespersons and therefore at the mercy of Lowes hard sales tactics and we were very delinquent in researching numerous complaints before purchasing Whirlpool Cabrio Platinum Model WTW8240YWD - Ranked lowest possible from ConsumerAffairs with hundreds of complaints. Whirlpool should be ashamed of product - clothes do not come clean, there is no soak cycle, no way to open mid cycle without losing all water, washer smells horribly, must be cleaned - are you kidding? Who cleans the washer that is supposed to clean clothes with a special cleaner?? We understand safety issues of water in open machine, wonder if Whirlpool understands the need to have a soak feature to clean clothes. Undereducated buyers like us and the totally undereducated salesperson at Lowes were obviously a horrible combination. It was all about sales for them. No one mentioned and we had no clue that the huge drum would not clean clothes even using less water than a traditional machine. We thought platinum meant a high quality machine. It clearly was a cleverly used buzz word for sales not a premier cleaning machine. Never, never, never purchasing Whirpool anything again. Wonder if Whirlpool cares, if they read the ConsumerAffairs reports, if they respond. Our hard-earned money is wasted. Our clothes are dirty, the washer smells, and the top is rusting out!

I installed my new water heater in 2012. Within 3 months, it was not producing hot water. When I called, a helpful person at the Whirlpool warranty line told me it was because there was too much cold water being mixed into the hot water coming from the tank. I hung up... Called again and was told that they would be able to get someone in 2 weeks out to my house to check it. I told them that was not acceptable. I hung up... I called Lowes, where I bought it. The person on the other line finally, after more than 1 hour, was able to get a repair person out there within 2 days. I had to pay the fee to have the guy come look at my hot water tank, and tell me that he hated Whirlpools. He called Whirlpool, 3 times; he was hung up on 2 times. He explained what had happened was I had a hot water leak, that it probably it was overloaded, the thermostat control everything else was fine. However, that I had installed the heater myself not a professional. Therefore it was not up to NATIONAL code; therefore, Whirlpool refused to honor the warranty. So, short version, in order to get the tank repaired, I was supposed to spend an additional $300-$400 to bring the heater up to code for them to honor the warranty. What you ask made my heater out of code? It is outside in my utility room, and the flue was cut to fit and the OUTSIDE vent pipe was not above the roofline. It didnt matter that it is not in an enclosed space, that this was nothing to do with the reasoning the thermocouple went out.I simply turned up the heat, so far so good. Will I ever buy another Whirlpool? No. I have a Whirlpool fridge bought before the hot water tank situation. The ice maker went out within 6 months of purchase. When I called to have it repaired, the service guy stated he hates Whirlpool. The piece he had to replace was plastic that was replaced with a metal piece that should have been metal to begin with.

We replaced older GE with the giant front load model that can do king size sheets and comforters. It has worked like a champ. It was a bit more but worth it for us. In a year and a half no issues no problems and I like the control lock feature so I dont keep hitting it off when I go thru the laundry room to the garage.

I have a refrigerator model wrs325fdam. Its not a year old and I cant believe the runaround that I am getting from Whirlpool customer service. Come one day everything in freezer melting. Call a repair person. He come out, diagnose the problems, orders $825 worth of parts for a $899 refrigerator, puts the parts in. On the temperature in the freezer reads 80 degrees. No its order $200 more parts for this scrap metal pile. At what point do the people give a damn at the consumer, its not like anybody has common sense. Im going on two weeks without a ten-month-old refrigerator and four days waiting for them to figure this out. Would not recommend Whirlpool to anyone who cares about fair treatment.

Purchased a 40 gallon gas water heater from Lowes. Installation was a nightmare trying to get the 3/4 pipe nipple fittings to seal. Once getting the two nipples to seal using extra thick Teflon pipe wrap, found the tank was leaking also. The return with Lowes was painless. Got another Whirlpool to replace, but angry about having to do the job twice. Wish I viewed this site first. Never would have purchased Whirlpool.

My Whirlpool Gold, Model # G16FDRXxQ06, has failed four (4) separate times. In each case I lost thousands of dollars, mostly in high-quality frozen foods. A Sears repair service representative came and repaired the refrigerator. In less than a year, after each repair, I had to call again. Three of these failures resulted in the loss of my food because the refrigerator simply stopped running. Unfortunately, I had been away from home for more than a week. One failure was caused by water leaking. This was apparently caused by a frozen pipe under the refrigerator. The repairman said that this was a routine failure for this Whirlpool model. I would like to recover my financial loss from Whirlpool. Is there a process to claim my loss? Is there a better, more reliable refrigerator?

I have a combo Microwave oven/oven GMC275PDS07. When the microwave is finished with the requested program, the end of program chime lets you know its done. Then, if the door is not opened for at least 3 seconds, the chime will ring again every minute thereafter ad nauseum. This will go on for hours without end. I know because I tried it. I reached out to Whirlpool via a web chat and my question was not even addressed. I was ignored. From reading other submissions, I assume this is de rigueur for Whirlpool. I then called Whirlpool and spoke to Katie in Tennessee. She was not able to bring up any make or model when I provided her the numbers exactly as listed on the inside of the door. She was not able to provide any respite from this annoying feature.This a Whirlpool Gold model, presumably the top of the line, in my book I will never purchase any Whirlpool product of any type and I will make it a point to let anyone who will listen that Whirlpool is not a manufacturer that takes its customers concerns seriously. Katie then advised that she looked up this feature and told me there is no way to turn the beeping off. I find this amusing since she could not find the model or serial number when I gave it to her.

We purchased a cabrio washer about 3 years ago and have had trouble with coins getting into the drain pump and cracking it. We have repaired this at least 5 times and dont understand why the washer allows this to happen. Yes we do accidentally leave coins in our clothes but we have not had this problem with other washers. Clothes also have odor.

Cabrio washing machine - I have had the exact same problems as all of the above... lid locks occasionally ... after many frustrating tries. I am ready to pick up this stupid washing machine and pitch it in the junk pile! Soap on clothes so I have to redo ... except many times it takes forever to get the stupid machine to restart... Most times I end up rinsing things by hand in the sink. We are constantly itchy from soap residue. My clothes do not come out clean. Especially the towels. Clothes are not spun out as much as they should be... Have been doing it over again by hand many times... which is not good because They still have way too much water in them and it takes 2 -3 Times longer to dry them! I am so disappointed in this set. I always thought Whirlpool was a great brand but, sadly, I was terribly mistaken. Never again. Finally got someone to say they have to replace all the controls. They say they will send parts but I have to pay someone to change it out... sounds like they admit there is a problem but will not accept full responsibility for it. I did not make the item so why do I have to pay to have it fixed? I believe they should issue a recall and make all of us believers in them again. I guess its my fault for buying their product? So... doesnt clean, spin, rinse, lock and has a bad odor... not a great product, is it?

I purchased this Cabrio washing machine in December of 2016. I have had a huge amount of trouble with the soap not washing out along with it tangling my clothes. This has to be the worst machine I have ever purchased.

I purchased this machine three years ago. It is junk. I have had two washing machines and they lasted for years and years. Never had a problem with either machine. I purchased them from Sears. When I the Cabrio, I was told it was the top of the line washer for Whirlpool. Three weeks ago it started making a noise like a plane taking off. It wouldnt spin the clothes. The repair person said that it could be three different things the parts, for which, would cost in the vicinity of $200. However, since it was making such a loud noise and water was coming out from underneath the washer, he was certain the transmission was out. He said the noise was an indicator the bearings were gone. I didnt see much point in repairing the washer if the transmission was out because it couldnt be fix.There was a couple at Lowes purchasing a machine at the same time as myself. They said they had a Cabrio also and it was only two years old. It wasnt spinning the clothes either and making a tremendously loud noise. They told us this before we mentioned that we had a Cabrio also. I will neither purchase another Whirlpool product. Junk!

Never have to worry about my extra freezer products. Keeps them at the correct temperature. Plenty of room on the shelves and on the door. A great asset for large families.

We got the convection oven. It has no element like the one we had before with the fan. It is useless. We have to upgrade the temperature to get what we want. Difficult to clean. It does not cook like it should. We do not like it, period. Those electronic controls are not doing their work. No more Whirlpool appliances. Problems with the noise of our dishwasher also.

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.

What a POS. Havent even used the thing to cook a meal yet and already some chunk of metal fell out from the port at the top left inside the oven (behind the vent). It was clearly cheap pot metal. What else is this thing made out of?

Purchased a black Whirlpool refrigerator, Gold Series, Model GB2FHDX WB 22 cu ft. with bottom freezer from hhgregg. Within one month I had water on my floor, ice buildup on bottom freezer floor. I had previously reviewed fridge and noise was a concern but I thought I could live with that. I contacted hhgregg. They would do NOTHING, told me to contact Whirlpool. The 1st repairman said it was the ice-maker. I DO NOT have an ice maker. He fixed a duckbill. 2nd call 6 months later, same problem with water, serviceman replaced duckbill. Next year, 2011 same problem with water on floor and ice buildup on freezer bottom floor. After numerous repairmen I contacted Corporate Office of Whirlpool. They sent another repairman at their expense. We are now 6 years later and I am having the same problem. Dont buy a Whirlpool Gold & dont buy from hhgregg.

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

Purchased a Whirlpool top loading washer. The agitation cycle is unreasonably loud. So loud you can hear it everywhere in my home and cannot have a conversation within about 30 feet of it. When I ran it for the first time I thought it was malfunctioning and when I called Whirlpool I thought they would send a technician to fix the problem but they told me that the sound was perfectly normal for high efficiency washers! My other high efficiency washers were very quiet. The fact that they think this type of noise is not only normal but quite acceptable makes me quite certain to never buy any of their products again. Very disappointed to see what once was a quality company to be so lame.

The Cabrio top load washing machine is a piece of junk, an expensive piece of junk. The only way someone could give this machine a good review is if they work for Whirlpool or they think beating clothes up against a rock in the filthy Ganges River makes them clean.We purchased the HE top loader because we were told that all the problems of the front loaders had been worked out in the new top loaders. What a joke. At least the front loader I had, cleaned the clothes. Since we got the glass top model, I made a movie that shows several items of clothes just sitting on top, not getting wet, not getting moved around, not getting rinsed; therefore, not getting clean.After the wash cycle spins down, the clothes are pinned up against the side and the rinse barely touches them before its final spin. We have several items that had stains left from the soap - yes, we used HE soap, Im not stupid. Never again will I waste my money on a Whirlpool product or anything from Best Buy.

Model WTW4850OXQO. Purchased this washer in Nov. 2011. Two months ago the washer began making a loud grinding noise in the wash cycle, so loud it can be heard throughout the house. Called the dealer whose serviceman said it was the gearbox and it would need to be replaced. Cost of the gearbox $235.00 plus $165.00 service. Called Whirlpool in TN and was told that I didnt purchase their 1 yr warranty. What the hell is a 1 year warranty but me paying Whirlpool to fix their defective piece of crap in case it breaks in the 1st year. I owned a Kenmore that lasted 11 years, an RCA that lasted 12 years, and a Maytag that lasted 10 years. Never a problem til they died of old age. This piece of ** is breaking down after 3 1/2 years. NEVER buy Whirlpool! Also, the inside of the machine SMELLS. My wife has to use bleach or cleanser to get the smell out. Once again a company in the USA thats too big to care about its customers!

My elderly parents had everything they own destroyed in Hurricane Sandy. After rebuilding their home, the new Whirlpool washing machine was broken. Whirlpool refused to disconnect and remove the machine that was obviously broken before it arrived. This is something that no one should have to go through. It is appalling and bad business. Through the kindness of friends, we had several male friends help with the removal. Truly shocking, that this is how Whirlpool handled this situation.

Model # WFG510S0AS1 SER #R30850040. Oven was installed NEW in the home I purchased in July of 2013. I used the cleaning feature on it in Nov 2014. I am amazed that it did not start a fire. Please see pictures attached. The whole control panel melted. This makes the oven unusable and extremely dangerous. I will need to replace the whole control panel. I followed the instructions completely in the manual provided for the cleaning cycle. It says in the manual to only clean the over this way as using easy off or any other cleaner will damage the inner surfaces.Whirlpool claims they have no knowledge of this problem but there are numerous complaints on their site about it as well as other internet sites complaining about the melting of the control panel. I need to know how to fix this problem and dont believe I should have to pay for something that is obviously a flaw in the materials used. It is extremely dangerous. Since these pieces of Whirlpool equipment were installed by the broker that originally purchased the home, I have no record of purchase. I can try and contact him and see if he has anything but kind of doubt he has receipts now.

My microwave is very reliable and has lasted a very long time. I have never had a problem other than the circular glass plate that broke. It took me a little time to get use to the timer on it which is a little different than other microwaves that I have used. Overall a good buy.

I like my machine even though there is no agitator. It is a top loader so it does not smell. It is a water saver which, when I first got it, I thought that it could never clean the clothes in that small amt of water...but it does clean the clothes very well.

Not working at all and only 3 years old. Completely non-functional. No fridge or freezer. Lost all my food. Garbage. DO NOT BUY.

Purchased 11-02-2016. This Whirlpool/Kenmore dishwasher is falling apart. Top rack wheels are totally broken, ordered parts 4 times, gave up. Now they are held together by gorilla glue. I have gone through 3 gray plastic end caps for the top rack runners. Now one is contained by a plastic slip tie. Last week it started leaking. Sears was totally useless. Whirlpool keeps sending me back to them. Now, I have to go buy another new dishwasher. It will not be a Whirlpool. Next time getting the extended warranty.

Whirlpool French Door 32 Cu. Refrigerator - Purchased refrigerator Nov 2016. Never worked, never cooled. Called Sears and was told to call Whirpool. Had to then wait 1 week for repair company to send out service tech. He determined it was unrepairable. A replacement was delivered. The replacement started flooding the interior down the back, filling underneath the bottom drawer and down into the freezer (ruining everything in the freezer) and out onto the floor. Called Whirlpool and had to wait another week for a tech. They assessed the problem and left. I was told it would be fixed within the week, that theyd call when the parts arrived. 3 weeks later, no word. Called Whirlpool, the parts were on backorder with no ETA. Two weeks later the parts were expedited, after I called again crying, and a tech came out again to fix the flooding. Two weeks ago the fan started to make a very loud noise and the internal temperature started to fluctuate and finally settled between 55-60+. Everything was ruined, again. This refrigerator is defective. Whirlpools customer service is deplorable. DO NOT BUY ANYTHING FROM WHIRLPOOL!!! They dont care that they make and sell defective crap. They dont care about how much money and time youve lost because of their defective merchandise. You have to have a service repair person come out at least 3 times before theyll even consider a replacement unless the repair tech considers it unrepairable even if it never really works or if the parts take weeks to be delivered. They DONT CARE about anything. Worst part is that I have no power or recourse. No one will help me. I was told today by the Sears Customer Relations to hire a lawyer. :( This is so wrong.

Bought in 2009 brand new set washer and dryer together at Best Buy. The washing machine in 2011 started its never ending problems. I’ve paid for parts & labor for the door lock sensor mechanism multiple times where I learned to repair that myself even buying parts and installing on my own last time... Then a drain pump went bad. Replaced that. Now a code f51 sensor to a motor rotor not spinning issue. Horrible. All the money and time in this unreliable machine is so awful. This thing also isn’t that great when it works too. Goes unlevel way too much having to redistribute and restart cycles all the time... Wish it washed better for the price and all the trouble. It is the worst machine. Has to be! Everyone I know can’t believe the fight I’ve had through the years with this machine. The company doesnt help you. Costly headache Junk machine!

I bought a Cabrio washer in 2009. I started receiving the infamous F51 code. When I called Whirlpool, they refused to even acknowledge that there is a problem with this washer. When I brought up the pages and pages of complaints about it, they acted like they did not exist. I hope this review will deter people from purchasing one of these faulty products!

I purchased this range in 2010 and needed to replace the control panel/switch membrane in 2011 and it was covered by the warranty. Then I purchased an extended warranty and needed to replace the same part again. Then I replaced it again in July 2016. This part cost $147 and you cannot operate the oven without it. There is something wrong with the range that is causing the failure and the cause of the failure should have been fixed when it was under warranty but now that it isnt under warranty, Whirlpool has refused to correct the problem or compensate me for the cost to replace the part.

I purchased this WRX988SIBM01 refrigerator new at Lowes 23 months ago. The freezer evaporator failed with estimated repair costs of $600 on a unit that cost $2400. The authorized repair person indicated that the failed part was a recalled item on the three door models. Mine is the four door model but has the same evap model. When contacting Whirlpool about covering some of this cost, they denied the issue and offered no assistance. This was after hours spent trying to get through. They do not return phone calls. I will never purchased another Whirlpool or related company product again. The quality is subpar and I hope my post prevents others from buying their shoddy products. Made in America doesnt mean what it used to.

I really enjoy the self cleaning option on this unit. It really cleans everything without chemicals and then you just vacuum up the dust. My dislike is the ceramic top though. The top scratches really easily and hard to clean up spills during cooking. Overall I would give this stove a b rating.

The French door fridge with the freezer drawers on the bottom are very flexible and easy to access. It goes downhill from there. The ice maker takes 4 days to fill up the bin with no use. The unit does not defrost and freezes up every six weeks requiring a manual defrost. Three mods have been made under the service contract and performance has not improved. PC boards have been replaced and at least one thermistor. My understanding is this is a single compressor unit with piping, relays and valves to port refrigerant to two different evaporators as needed. Unfortunately it simply does not properly balance/defrost and the freezer door freezes up. It certainly is not compatible with a high humidity environment. We will never buy another cooling design like this, but sure like the French Door layout. Glad we have a service contract.

Very reliable and cleans clothes very well. I have used almost every machine on the market, and none compare. Very quiet and I use very little detergent and CLOTHES come out very clean every time. I am just very satisfied with my experience.

I bought a new house in Hattiesburg with a Whirlpool dishwasher that is loud. It runs normally but when you open it the dishes are just as dirty as when you put them in if not worse since it will spray any residue from the bottom to the top shelf. I have taken it out and inspected all lines and such but can find nothing wrong to the naked eye. Thus I’ve got dirty dishes that must soak since the drying cycle retakes grime back on and then be rewashed.

My washer worked less than a year. I finally called Whirlpool and they basically said, were a big company and you must for the rusty, broken drive shaft, pay for all new computer face plate, and service repair. I contacted the FTC and they told me they needed more complaints in order to make them do a recall on Cabrios. Good luck!

I purchased a Whirlpool top load 8500 washing machine from LOWEs two years ago. I noticed that the clothes were not getting wet, clean, were coming out covered in lint, soap film and stained. It is misleading to call it a HE washer since I have to wash each load 3 - 4.5 hours. It is NOT energy efficient if you have to wash each load of clothes 3 times with a rinse. I have tried all of the tricks - changing soaps, labeling the wash as bulky, wetting the clothes to add weight... Washing clothes should not be this complicated. The clothes are sorted appropriately and washed in the right temperature. I do not understand what is staining the clothes. I put new white towels in and they come out stained (see photo)? Lowes sent out a repairman who said the machine would never clean the clothes since there was not enough water in the washing machine to wash the clothes. I tried to return the washer to Lowes but they said it was past the 30 days. Unfortunately, I purchased the appliances on a Lowes credit card so there was no recourse. I then contacted Whirlpool and was put on hold and transferred to various people before I gave up.

Just bought Whirlpool refrigerator, stove, and dishwasher. So far, the icemaker doesnt work and so I have no water or ice in the fridge. After four visits from Lowes it is still not resolved. Going on since 11/16/18. After waiting three weeks, the dishwasher came, and lo and behold - it doesnt work. Now I have to wait for one to be ordered! TAKE A WORD OF ADVICE - WHIRLPOOL ISNT WHAT IT USED TO BE. DONT BUY IT!

We purchased a Whirlpool Cabrio washer brand new from Lowes. It did great for about 6 months when a terrible grinding noise started. Then it also would not spin dry the clothes - they would come out completely soaked. Repair guy came out and fixed it. Lasted for about 1 year - same thing again. Lasted about 1.5 years this time and now the loud grinding is back and my wife - who Ive heard cuss just a couple times in 20+ years - said, This ** thing sucks. The clothes are soaked. I cant stand this washing machine. So, Off we go to buy a new machine. Definitely not a Whirlpool though. Id give this machine 1 star because it does a decent job for a while but major repairs 3 times in five years is not what I deem an acceptable appliance.

The Worst experience with Gold Series Mod WRF 757SDEM01. Purchased from Best Buy June 2016. $2215.00. Within 6 months The interior light began going dark within 6 months. Our very reputable warranty repair service ordered a part that did not repair it. Was only temporary. They did figure out that the circuit board was bad and promptly took care of our problem. Next I kept noticing water appearing on our wood flooring. Let it go because it only appeared sporadically. Called Whirlpool only to find out they switched to a warranty repair service that was inept and inexperienced. Said he could fix it. Blamed it on a freeze-over so I let floor dry up then re-started and refilled. Thought he did fix it cause it made sense. When reassembling he broke to upper freezer try glide. Then 3-4 weeks later I notice one morning water again on my wood floor. The dripping had been running beneath the wood slats and had seeped up through the joints. Now the flooring wood has swollen and will need to be replaced because of this. This is the second time I had to unload all food and store at neighbors and give away. Extremely poor engineering designs as each time the ice dispenser is used, nothing prevents ice from flying out onto the floor ever since day one. Same with water. The release does not shut down to prevent water or ice from pouring out onto the floor when removing any size cup. The refridge doors must both be opened to use the lower level drawer. Loses much cooling with having to always open both. Next, weve come home MANY times with the left refridge door partially open because of the difficulty of the mechanism to secure at closing. This happens to us 5 times a week for three years-honestly!. This was the only refridge we could find that would fit our opening in a 20-yr-old home. The fridge is so heavy one man cant pull it out of its opening. Only 2 very small wheels in front and skids in rear stick due to weight. Weve confirmed this is not a spigot leak from the ice maker. Finally (but probably not) the ice container allow much air in because of having to open the left door that your ice is always melted together plus it too small for a family of two and ice must be purchased when entertaining. And to top it off, the human that took the warranty call this time is foreign and my wife could not get them to get our last name spelled correctly nor the phone number correct after constantly repeating it. This unit and model is an absolute lemon. Im going out today to find another unnecessary $2500.00 to buy another.

I purchased the unit in May 2012. Right out of the box on the first day, the tank was leaking water from where pressure relief valve screws into the tank. Whirlpool replaced the part from my local Lowe’s store which I had to go get on my dime and install myself to solve the problem. Its now the 2nd week of January and the water heater is dead. I didnt even get 8 months out of this water heater that has a 12 year warranty. The electronic thermostat died, and I will be going 3 to 4 days without hot water until Whirlpool can ship me another thermostat. Nothing like taking an ice cold shower in the middle of winter. Like I said, buyers beware!

In August of 2008 I purchased a Whirlpool Amana refrigerator, Model# ABR2227FES. It worked great for exactly 6 years. In Aug of 2014, the motherboard needed to be replaced as it was not forcing a defrost when needed. I tried to get a refund on the cost of the part and labour but both were refused. In Dec 2016, just two and half years after the motherboard was replaced, the exact same problem re-occurred. Again I tried to get a refund on the cost of the part and labour but both were refused. Will I be buying this refrigerator in the future? A definite no!!!

I purchased this piece of crap excuse for a washing machine, the Whirlpool Cabrio, almost 2 years ago, in September, 2015. Since that time I have had nothing but dissatisfaction about how it washes, and the extremely poor results. I contacted my sales associate early on, I was told, just like others who have purchased this machine, that it was a water-saving machine, and I needed to read the manual closely and just do what it said to do. I did that. Long story short, I am sick and tired of this machine, stopped using it, bought another machine that lets me choose how much water for each and every cycle, it washes extremely well, my clothes come out clean, it HAS AN AGITATOR, DIFFERENT BRAND, and I am very HAPPY with it! I will never ever buy a Whirlpool product again. I am well-known, have an extremely large number of friends, and I will be spreading the word that Whirlpool built a piece of crap. Never mind that piece of crap washing machine was mandated per government regulations to cut down on water, thats a bunch of crap. Users should not have to buy expensive cleaners, tote extra water to a washing machine that uses so little water that it barely covers the clothes, and no person should have to use a product like this. Never. Washed clothes from this machine stink, the odors will not leave my clothes, whites are now yellow, stained, and colors have white spots on them. Whirlpool, you have built this piece of crap, I hope you have large heapings of Karma! What a joke. What a useless company now, sell out and go play on the beach. You deserve the dirt, not your use-to-be-loyal customers.

Ive owned the microwave for 2 years, and recently the DOOR AJAR alarm goes off whenever I try using it. The appliance is now essentially unusable. I wish I knew about this known defect before purchasing. I spoke with Whirlpool Customer Care, and they want to charge me to have someone come fix a known defect. The charge is more than what I paid for the microwave. Please avoid Whirlpool at all costs!

My Whirlpool washer is lasted 15 yrs and is very good at cleaning clothes, it is also easy join my water bill. I purchased mine at Home Depot. They also finance. I hope you enjoy your purchase. I know I do.

I had a Whirlpool oven for 14 years. It worked great and the control board burned up during the cleaning cycle. I purchased a new whirlpool oven that did not have an exposed bottom heating element. It takes way too long to preheat and if during baking, you need to change the temperature, it starts preheating again and the displayed temperature is lower than the original temperature that was set at the beginning; and it takes too long for the oven to reach the new temperature. This appears to be the result of the bottom heating element being hidden. Heating and maintaining a consistent temperature is far more important than being able to clean the bottom of the oven especially when this is a self-cleaning oven.Updated on October 20, 2015: This is an update on my last review. I was cooking a cake at 350 degrees and when the designated time was up, I opened the door to check for doneness. The cake needed to cook a little longer, so I closed the door and the temperature immediately went to 300 degrees and started preheating again which of course caused the oven to get too hot for the cake I was baking. Who is designing these ovens??? Certainly not a person that cooks on a day-to-day basis. I will never buy a Whirlpool oven again.

I love my washer and dryer. The only problem I had over the past five years since I bought them was when the motherboard went out on the dryer. Luckily I had insurance, so was able to have it replaced. The features on the machines and their ability to clean really well have made my life much easier when it comes to doing laundry!

We started noticing pools of water on the floor on the left side of the freezer. We would then open up the drawer and it was covered in ice. The water was not noticed until the morning so it has caused damage to the floor and molding in our house that was built in 2012. I called the repair company that I used to have my Whirlpool oven fixed (broke twice). That is when the manager gave me the lowdown on what has been happening with this fridge. He told me to call Whirlpool and have them pay for the repair and part and to research online, that it is a design flaw with the freezer and the p-trap and draining under the ice maker being not efficient.I called Whirlpool and complained. All of my appliances are Whirlpool and I spoke to a Supervisor. They only would not agree to pay for the repair and only will pay for the part (which is only $27.00). This fridge is 15 months old and I am irate at the lack of customer loyalty from Whirlpool. They responded the exact same way when my oven broke a month out of warranty. I will never buy another Whirlpool appliance again, and would like buyers to be aware before they buy an almost $2,000 fridge.

Bought a Whirlpool Cabrio Washer Dryer combination on 4-5-2009, had it delivered on 4-20-2009, was very excited to get this set as it was like my first ever brand new washer dryer. I thought Id spend the money get something good and it would last for years and years. Was I ever wrong. I bought the set and the extended warranty from Lowes and my total with delivery was 2579.00. 20 days after the extended warranty expires (that I never used) the bearings on my Washer go bad. This thing in spin cycle sounds like a jet engine. I called to see if Lowes would still honor my warranty because I never used it and they said no. I called Whirlpool and checked to see if there was a recall and they said no. I checked to see if there is anything they could do at all because this is a huge known issue and of course they said no. (Just look on YouTube for Whirlpool bearing replacement and the amount of views should indicate the amount of troubled users.)Called a repair scheduled through Whirlpools website to come look at it for a 75 dollar assessment and they said it would be about 500-550 to replace the outer tub - largely due to the fact its labor intensive and the bearings are packed in the outer tub from the factory. I was like are you ** kidding me? I paid 1029 for the unit brand new in 2009 and 550 to fix? I said thank you to the repair guy and escorted him nicely out. Upon that I called back Whirlpool to tell them how displeased I am and how I will not be another product of theirs ever and mostly due to the fact they know this is a huge issue and wont do anything about it. I will be going to Lowes to see if the guy who sold me this pile of crap will work me a deal on another unit or set of another brand after I show him my receipt and express my displeasure with that product. If they wont do anything I will go to another store and spend my money elsewhere - I have choices and others do too. So if you are thinking about buying anything in the Cabrio line, dont. Go Samsung or LG - 10 year warranty straight from the manufacturer and costs 200-300 less than I paid for my washer dryer 5 years ago. The bearings are ** and shouldve lasted a lot longer for the amount I used this machine and for what I paid! Shame on you Whirlpool for using crappy parts to make your machines.

My husband purchased a Cabrio washer and dryer pair for Christmas 2010. I have faithfully used the affresh every month, and spent a fortune on it I might add. But for about the last year or so, no matter that the washer has been cleaned at times when the load is finished there is all kinds of black stuff in the tub and on the clothes. The tray under the detergent dispenser is all black and nasty and impossible to clean thoroughly. The black stuff will come through the holes in the tub as well. Water stands in the bleach dispenser at times, fabric softener does not all dispense, the LID is broken and has been but I cannot afford over 200.00 for a LID and about 100.00 to have repairman to put it on. We do not have heavily soiled clothes that would create excessive dirt, never have had and we are now retired so we surely dont now. Bottom line, I thought maybe this would be the last washer I would need but I hate it. It is only 5 years old but I am stuck as I cannot afford a new one now. Factory rep says if it is cleaned as it should be, I should not be having this problem. Not true, it has been cleaned as recommended!!!

I purchased the Whirlpool washer with the expectation of having at least clean clothes. In fairness, I do wash some pet items but they are done separately. My clothes at time come out dry in spots because theyve not been touched with water. Forget the balancing issue. What I will have to do is wash, rinse, and repeat. This will be my life until I can get a new washer. Never again Whirlpool.

Its a great machine but the temperature control button is easily moved at times. The machine does a great job in washing clothes. Ive had mine for 10 years now and hope that I never have to replace it.

Easy to operate. Easy clean feature is thorough. Glass top is easy to clean as well. Even temps cook the food well and this oven is reliable. Lots of options of temperature. Glad we chose this brand.

I purchased a rental home with a Whirlpool hot water heater. In the home inspection, it was deemed to be in good working order. The first day the tenant moved in, I received 3 service calls for no hot water. My contractor told me I needed to replace the start up assembly and it needed to be ordered from Whirlpool directly, as it is not available in stores. When I contacted Whirlpool Customer Service, the operator, Stacey, was rude and unhelpful. She told me that the warranty was void because I was not the original owner, even though it does not state that the warranty is not transferable. She also told me she could not help me order a replacement part without the item number.

I bought my Whirlpool gas stovetop in March of 2016. The burner knobs that connect to the stove is made of plastic and all 5 knobs broke within the first year. Each year I have replaced knobs and had issues with the knob breaking and then not being able to tell if the gas is off or on. I have called and talked to people at Whirlpool about this issue several times. Although they seemed concerned they will not replace the knobs and I have had to purchase them through Whirlpool. The gas stovetop obviously has a serious and extremely dangerous design flaw. I have kept some of the broken knobs just to tell others about this terrifying flaw. Again, last night the gas was on for several hours before we discovered it!! I called Whirlpool again and they were unconcerned. The Model is #WCG97US0DS00, Serial#D60509297. Beware and DO NOT PURCHASE this gas stovetop. I wish I had not bought mine.

My Duet washer is just 3 years old and has had light use as there are only two people in the household. After just 3 short years the machine stopped working. We were told it needed a controller board and new valves. The cost of the repair was quoted at $733.00. This is far more than we paid for the machine. So we called customer service and at first they thought they could sell us a plan for $350.00 that would cover the repair but it was denied by the supervisor. So zero help, absolutely nothing. Now the backdrop here is that our last Whirlpool (same type) is still in use with our son no repairs in 15 years. Does anyone reading this think we should buy another Whirlpool or recommend it to our Friends and family? I think a Maytag is in our future. Whatever happened to companies standing behind their reputation in America?

Less than 2 years after we purchased our whirlpool dishwasher, the rack started to rust. Now the tines are so soft they fall off. The last time we bought a dishwasher the Same thing happened, but after 15 years! They dont even have an option for that to be under warranty so it tells me they dont stand by their product. I will never buy whirlpool again.

Whirlpool model WRV986FDEM Purchased May 31, 2017 from Lowes. Cost: 2,638.10 including 229.97 for the 5 year extended warranty. We’ve experienced four failures in the nearly four years we’ve owned this lemon. The first failure occurred within the one year manufacturer’s warranty period. The three failures since then have been fairly close together. Control boards and mechanical parts have been replaced. We are now waiting for a “made to order” part, with no scheduled delivery date. When I pressed Lowe’s on the reliability of this fridge, I was told that if four failures occur during the extended warranty period, they would give us a replacement. Considering the delays in repairs and frequency of failures, this is unacceptable. Do Lowes and Whirlpool expect their customers to just suck it up and do without a refrigerator for months while we wait? The warranty is worthless without prompt problem resolution. Whatever happened to real customer service?

I have owned Craftmaster 30-gallon hot water heater and the only things reliable about it is trouble and aggravation. I purchased this in 2004. I have had to replace the controls, valves, wires, etc. three times in 10 years. And Im now looking at doing it a fourth time. The design of these parts are utter crap! Cheap plastic! After replacing these parts, this hot water heater works great for a few years, then invariably starts acting up. The pilot light goes out when the heater is supposed to kick on instead. Getting the pilot light lit again, is an exercise in futility! The red reset button once released, immediately extinguishes the ignition flame. Supposedly, after holding it down for 1-2 minutes allowing gas to build up, it should light the coils... and if it doesnt, youre supposed to wait 10 minutes to try relighting again. You can repeat this process for 12 hours, and if you finally do get this temperamental piece of junk to light, youre lucky. Customer Service has been useless in assistance. All they want to do is send you e-mail, and get you off the phone. Not to mention, Ive been told by many a rep that the hot water heater extinguishes itself, if water is overheated, and that it must be my fault for setting the temp too hot. Baloney... Ive been told that the underside vent must be cleaned every few months, so that air flow is accurate. Makes no difference one way or the other. And recently, Ive been told by a rep, that my 40-yr-old house likely doesnt vent exhaust out through the roof properly. This product is inferior and unpredictable. Its great when it works, and the pilot light stays lit. God forbid it ever goes out though! It is next to impossible to relight. I have spent more money on service technicians attempting to repair/replace parts, than it would have cost to simply by a new hot water heater. I miss the old days, when it was easy to light a hot water heater: Strike a match, turn the gas on, and instant hot water. No muss, no fuss. Having owned many properties w/ hot water heaters over the years, I have never encountered such repeat problems, as with this product. Its simply not reliable, and not worth the $$$. Never again, will I buy a Craftmaster Product. And I had no clue that there was a Class Action Suit filed, and a settlement involved in these faulty units. Whirlpool/Craftmaster should have notified everyone, who purchased one of their units. Now Im stuck w/ a constantly broken unit, and zero recourse. I will never buy anything Whirlpool/Craftmaster again, as a result.

I purchased a 50 gallon Whirlpool water heater, model FG1J5040T3, in November, 2005, and have had the same experience as reported by the hundreds of others, whose comments I have been reading. Basically, pilot wont stay lit. I called Whirlpool, relight the heater, when it doesnt relight, wait to receive repair parts, call a plumber, and pay to have them install it, then repeat same problems. Each time going for a week or so, without hot water.After relighting the heater 10 times in the past year, and service calls, Whirlpool authorized me yesterday to return it to Lowes, and get a replacement. I need to hire a plumber to unhook it, haul it to Lowes, get the new one, and install it. It cost me about $300 to $400. Will the replacement be any better? I am considering just replacing the heater with one made by Rheem.

It washes everything well except the interior of the washer. And the filter is a pain also even when we rinse the dishes beforehand. The buttons are a pain in the ** to see without all of the lights on at night.

To be fair to Whirlpool, I have contacted them but have not given them time to respond. I feel so strongly about this issue that I want to get the message about this company product out. About 2 years ago, we purchased a Whirlpool fridge, stove, and dishwasher. I have had so many problems with the stove (WFG540H0AS0) that it has pissed me off, actually. First, the knobs that control the stove top melted. MELTED! We had to replace them to the tune of $30.00 each and there are 5. Why would anyone use knobs that cannot withstand heat on a stove?! News flash, I cook on my stove. Therefore, there will be heat used. Second, the oven keeps shutting off in the middle of cooking my holiday meal. Of course, this made my turkey take much longer than usual. Today, it shut off in the middle of cupcakes. Third, the oven does ignite without turning it on and off multiple times. So we called the repair person who told us to replace the ignition switch for it. This helped for about one month. Then the problem started again. I just emailed Whirlpool and I will call them next business day. I am so disappointed with Whirlpool. I thought they had a good reputation for quality products.

Do yourself a favor and do not purchase any Whirlpool gas heater product. There are numerous poor reviews on Whirlpool water heaters. The one I purchased, 50 gallon Whirlpool water heater; I had to replace the control valve three times. After the third time, (the water heater was less than 18 months old) I gave up and purchased another product. Whirlpool would not replace their poor product, but did replace the control valve, each time, which cost $100,00 labor each time. After the water heater was taken out, there were visible leaks on all connections. (A licensed plumber installed it.) Over a period of time, I lost a total of three days work, was w/o hot water three times for two days each issue. I hope I can save the next consumer similar difficulties with this product. Check consumer reports before purchase of this product. There are numerous complaints. Also, local plumbers can advise on how many issues they encounter with this product.

I bought a Whirlpool refrigerator (dbl dr) from Home Depot and received it on August 4th. When I went to clean it I found that blood had spilled from a roast and had accumulated all around the inside of the plastic shelf seal. It was impossible to clean. Water just ran inside the seal and diluted the blood. Then, it leaked all over my kitchen. I had a serviceman here for another problem, sent by Whirlpool. He said hed try to get them to replace the shelf. Never heard from him again. I called Whirlpool today. Was told I could buy another shelf. Otherwise, they didnt care. Said it wasnt a functional problem. This is a definite health hazard. Whirlpool used to be wonderful. What happened? I have a dryer, washer, and water tank about to need replacing. Whirlpool wont see a dime from me. (Home Depot, either.) This has become a very bad company. Ive contacted the NY Dist. Attys office. Meanwhile, I have a fridge with a major shelf missing for the holidays and for the foreseeable future.

This Whirlpool Washer Mod # 4800XQ2 eats holes in all of my clothes, came from Lowes. I still have the sorry machine.

Whirlpool refrigerator WRT1LTZW00 - Bought refrigerator, works ok but makes noises that will wake you up in any room of the house. Had Whirlpool products for over 40 years. Why would someone make something that noises. Service came, said they all like that with new gas, cant do anything. Find hard to believe this was consumer tested. 6 weeks old, cant sleep with noise. Has anyone had same problem?

Its very noisy, and there are no blankets to purchase to deaden the noise. The dishes all need to be dried by hand. Some of the dishes come out dirty. I would never purchase another Whirlpool dishwasher.

Ice maker will freeze up every couple of week. I cleaned it all out last Saturday and today, Friday, it was frozen up again.

Similar to what I am reading below and on other sites, my hot water heater stopped working. I spent about an hour trying to relight the pilot light, which apparently you cant do with this model because it breaks. My first thought and action was to call a plumber to come fix it. When he arrived he said it was reverse thread and that I would have to call Lowes to get a replacement part. When I called Lowes they said they would call Whirlpool and then give me a call back. Two days later I still havent heard back or taken a shower; I am going to the gym tonight. Finally, I got online and called the 800-number and am being sent a part to arrive tomorrow. I asked to be reimbursed for the cost of the plumber since they obviously knew they had a problem (they assumed why I was calling the warranty line) and redesigned the issue with a voluntary recall. Whirlpool, please make this right. I know you license your name to American but it is still your name and brand reputation.

The refrigerator does what it is supposed to do. The fact that I had to have it repaired only after 1 year of ownership confounds me. The space in this side by side is a bit crampy. Seems like Im always shuffling things around. I truly believe that Whirlpool made the condensation tray underneath the unit out of cardboard. It literally disintegrated and started leaking after about a year and it was 200.00 to have it replaced by a repairman. The water filters always tend to piddle on the floor too. At least I hope thats what it is, and not another wilted tray!

Our home came with an Asko dishwasher, theoretically a premium device though the experience was not the best. Anyways, had to replace it after a few years and decided to buy a Whirlpool under the assumption that if an Asko kind of sucks, being so expensive, it was not worth the money to spend big bucks on an expensive dishwasher. I could not have been more wrong! Bought a middle of the pack Whirlpool, I think we spend around $500. Complete junk. I had to use our Sears home warranty like 6 times. They replaced two times the computer board, all the sensors another couple of times, motor, you name it! Worst part is that all of the non essentials part that also broke off (wheels, and plastic pieces of the door) were not covered by Sears warranty so I had to end up using glue and all kind of contraptions to keep them together. Finally, when we decided to put our house in the market we replaced this junk with a Bosch. So far so good. Whirlpool actually never even washed properly, now with the Bosch we finally know what it means to have a dishwasher that really washes for real!

Warning: Whirlpool water heaters are junk! Spent $553.00 for a high quality ( lmao ) water heater that had a 6 year warranty. Started leaking internally and rusted through, then rusted a hole in the bottom. 6 years and 3 months later they said you are S.O.L. Leak occurred well over 3 months ago, but they said it has to be reported before the 6 years. Do not waist your money on this junk!

I purchased a Cabrio Washer and Dryer set last October from Sears. The washer had a damaged washer basket and then stopped working altogether. The service call to get the washer working again was a fiasco. The tech replaced a switch which failed in the first 5 minutes and had to be called back to replace that defective switch. We now have the same problem all over again and we are on our third service call and the warranty is expired. Whirlpool is useless and will probably be out of business if they continue as the middle man for Chinese manufactured garbage. I will never purchase another Whirlpool product again. Word of mouth can make or break a business, not advertising. This stuff is real junk and trash. Im sorry we bought it. Do not buy any Whirlpool products.

Ice maker has stopped making ice on several occasions. Also when you try to get ice out of the door dispenser, it will continues to release ice but will not go down the chute and when you open refrigerator door it spills out all over the place. Getting ice other than from the door is no easy task. I have taken to putting a bowl under the ice dispenser. Interior of refrigerator is not user friendly for positioning items. Bought in a hurry back in 2017 and have regretted it ever since.

We have a large family so when we needed a new refrigerator we found this very large unit (Whirlpool 32 cu). About this unit, its not really all that wide, but it is very deep. Lowes didnt have a model on the floor but we went by photos. Also the salesman showed us a smaller version of this unit and we were impressed with the design. However unlike the unit we saw the shelves arent adjustable. They are preset. Also the ice maker on top is very small and makes ice very slowly. The freezer section ice maker is much larger. The main complaint I have with that is unless you push the tray all the way to the back ice can drop behind the tray and fall down causing the freezer door not to always close properly, leaving you with semi defrosted food. Whoever designed this refrigerator was an idiot. All issues are really related to design flaws. This is a very expensive refrigerator. I expected a great unit and got a piece of crap instead. Stay away from this model at all cost. It would be smarter to buy 2 refrigerators instead if you have the room. This model will give you nothing but a headache and grief.This is our story about our experience. This all took place within 1 year. We bought it at Lowes. They were wonderful when it came to taking care of us when it was within the stores’ warranty. They really tried to help us. Once their warranty ran out they put us in touch with our new repairmen. Lowes did tell us that one other man bought the same unit and he was up to refrigerator # 15. Like I said, this unit is crap. Our first unit was delivered with a huge dent in the door. They took it back (lucky for us we have 2 other refrigerators).Second unit arrived in store also badly dented. They didnt bother to deliver that unit. Third unit arrives at store but back area around motor all dented up. They order a 4th unit. This unit wasnt dented up so they delivered it. However doors were very off and wouldnt line up so it didnt close properly. A 5th unit was ordered and same issue with the doors. A 6th unit ordered and they called telling me that it was all dented up and needed to order a new unit. Our 7th unit arrived and in 3 days started making funny sounds. Dual ice makers stopped working and inside refrigerator is was very warm. Lowes ordered #8. This unit the freezer doors werent lining up so #9 was ordered. This time everything seemed to line up, no dents however by the third month it started making a funny sound. Dual ice makers stopped working. Warm inside the refrigerator section. Lowes sent out a repair man. He explained a design flaw was not enough insulation around the fan so it was icing up. That was replaced and it was working nicely for 4 months. Same issues with fan icing up, the noise and no ice. The repair man came out again and mentioned what was kind of a recall with the unit. The control panel in the back of the refrigerator was wrong and needed the correct one to be put in. That was done. He told us that we shouldnt have any more issues with it.Same thing again. Same symptoms, same results...we had to throw out hundreds of dollars worth of food. (I just put in an entire prime filet mignon I planned for a special dinner and had to throw it out. OUCH!) Awaiting for the repair man, again. He will be out in 5 more days. Im sure it will be a new issue, a new brand new fix and it will work for a few weeks to months and we will be calling him again.

My dishwasher control board caught fire yesterday. Noxious fumes and black smoke with popping noises moments after starting it. Was glad we had not gone to bed and glad we were home when it happened. Would not shut off and the door was hot to touch. Had to turn off switch on wall.

Its big enough, but the ice maker is always messing up, the shelves broke easily, the water takes forever to get cold from the indoor dispenser. The finish, which is called Satina or something like that, dents real easy. It is really a piece of **! When it was new, we had the repair man out 4 times before it was fixed. He even said it was a piece of junk and it should be lemon lawed out. Drawers broke, shelves broke, and parts are really expensive when you break one of the plastic parts.

WRX986SIHV00 - French Door Fridge, cost $3k. After 16 months lights on top of fridge and freezer broke, Whirlpool only states no more warranty and offers no help. For such a pricey appliance that is a very weak quality and inadequate service IMO.

I purchased a Whirlpool gas stove model #WFG540H0AH from Sears in March 2103. Since that time, the oven has repeatedly broken. After two major repairs, the repair company said the fas venue (?) suspect board was defective and needed to be replaced by the manufacturer. After 3 weeks of back and forth calls with Whirlpool customer service, the only solution they provided was for me to purchase a new stove at a discount with no compensation for installation, the gas connection kit, or haul-away of the old appliance. The original stove cost me $1100 including the installation, haul-away and taxes. The replacement option would have cost me $800 and still did not included haul-away, the gas installation kit, or taxes. Hardly an affordable solution. Whirlpool at no time addressed that a part on the stove was deemed defective.

I have double door Whirlpool refrigerator 1.3 years old. Since last 1.5 month I face problem. 4-5 times their technicians done visit. Following observations done by them: 1st visit problem - Water run away from back side bucket. Solution - Due to atmosphere moisture. 2nd Visit - Cooling fan not working. After 2nd visit refrigerator not worked. 3rd visit - Compressor fail. 4th visit - replace compressor. After replacement, refrigerator outer surface become heated. Skin will burn if anybody touch refrigerator. Problem still continue... I pay 2000 rs to Whirlpool as per companys norms. I lost my frozen, milk, veg., fruits etc. of approximate 1000 rs.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

Like many others Im experiencing the same sensor problem with my 4-year old Whirlpool oven. It wont start even after opening and closing the door multiple times as directed. I installed this oven to replace the original Whirlpool model when it died after about seven years. Im absolutely done with this thing. How frustrating when you find out that your guest isnt able to a forgotten cup of coffee that went cold. I thought to call a repairman but after reading all the reviews, I feel its better to switch brands.

Whirlpool stove and dishwasher very good quality. I find that the quality is beyond excellent for the amount of money. I would highly recommend Whirlpool. Easy to clean, heats up fast, looks beautiful. I would never change Whirlpool for anything else.

Whirlpool has always been the refrigerator I have had all my married life which is 48 years. Reliable and dependable they are and I never have to worry about them.

We purchased the unit in March, by April it wasnt cooling. In June it shut down. In July after 8 tech appointments and repairs. Whirlpool finally said they would refund my purchase and I should see the money in about three weeks. That would be about a week longer than the refrigerator worked. I dont have the money to just get another one so I guess the family will be without a refrigerator for another month. That means shopping every day for perishable for a family of 10. I would not recommend another Whirlpool product. This is no joke, every time I called them one of the first things asked was Did you get the extended warranty? Why would they ask, sounds as if they dont trust their own product either. This unit was purchase online through Sears.com. Purchase price was $2299.99. Order placed on March 4, 2017.

2012 1st year water dispenser stuck, would not stop pouring water until I shut water valve off behind refrigerator. Replaced switch under warranty. 1st year bottom mount freezer stopped working, replaced condenser under warranty. Handle coming off freezer door not replaced. Today Nov 5th past warranty date Oct. 21st 2012. There is ice buildup in bottom of freezer due to a duckbill valve that I just found out about... This is junk and I already replaced the washing machine. Now I am going to replace this fridge if I have to have money to fix this out of pocket. Dont buy whirlpool and i think they make the same thing under other brands like Kitchenaid. My fridge was registered with whirlpool and no one contacted me from whirlpool about the problem they were aware of, to tell me that the valve is free and labor was free for first two years. Now only part is free. What a rip off. My appliances were part of the purchase price of a new home from a developer.

I purchased a Whirlpool cook ceramic cook top for our new kitchen. The very first time I made something (it was lentil soup) something stuck to the cook top. I have had a ceramic cook top before for 18 years - never had a problem until the whirlpool cook top. I cannot get it clean. I have tried everything! Such as stove top cleaner designed for whirlpool cook tops ($22), other cook top cleaners, the single edged razor, a scrubby sponge, steel wool, I even resorted to furniture stripper - NOTHING has removed this spot. I am ready to throw out this new stove top! What a huge disappointment this Whirlpool product is.

Whirlpool g2 convect/micro over the stove oven - This top of the line oven is JUNK, KEEP YOUR MONEY-DO NOT BUY THIS JUNK! I have had problem after problem. Starting after only three months. Defected door switch, touch screen, flashing screen, error message. The service repairman and I are on first name bases. Thank goodness for the, out of my pocket warranty which I no longer plan to keep. I NEED A OVEN AND DEFINITELY NOT A WHIRLPOOL.

Whirlpool Cabrio washer (WTW6400SW2) - After a few years of working, my washing machine lists a code of F50 and will not spin. After three visits from a repair company, they couldnt fix it and said we need to buy a new one. It seems like an electronic problem, but we have to replace the whole machine. Consumer Reports says a machine should last 10-14 years. Numerous people online have stated the same issue with the same model. More than one person stated there is already a class action lawsuit on this machine? Please help. Who can afford a new expensive machine after a few years of service?

I own an FG flame lock water heater and have been having the same problems with the pilot light not staying lit. This is very frustrating! I have searched many websites and am not able to find a replacement thermocouple for the stupid thing. Also, I have been told that the parts for the type of water heater that I own is no longer available. I tried to call the Whirlpool number a handful of times, but unfortunately, I was on hold the entire time and could not speak with a rep. I guess that explains all of the complaints I have read on here. I would like to be contacted or have help from someone regarding this matter! I would not recommend this product to anyone and I am very dissatisfied!

Me and my wife bought a Whirlpool top load washer June 2011. Two months later the motor locked up and they repaired it; then the transmission started whining the next month. It was repaired. Now a bearing is going out all in the first seven months of ownership and they will not exchange washers, they just want to keep fixing this one until the warranty runs out. Whirlpool washers are a piece of junk and I will tell everybody not to buy anything Whirlpool.

Cabrio he washer wtw6400sw2 - I bought this washer about 6 years ago at the time we paid around $900. Now my bearings went bad and the repair person told me it would cost around $300 to $400 to replace the bearings and seal and shaft but that I should call Whirlpool and see if they could replace the part or give me some discount cause it is becoming an issue with all the Cabrio washers. So I called and spoke with a so called manager - as far as I know it could of been a cleaning person there. She told me that she could not do nothing about the issue. So if a lawyer would be nice to help me and the rest of the world that are having all these issues to file a suit against Whirlpool Corp.

Whirlpool fridge with ice and water dispenser that broke down within days of install. The water dispenser stopped working after the first flush and Whirlpool were notified. They engaged a useless repair company who have been unable to resolve the problem and will not communicate updates. Whirlpool have been fully informed of the problem with their brand new product which was defective practically from the start and have washed their hands of any involvement in resolving the problem with their appliance. They defer defective product as a warranty issue and leave the consumer to chase after people to get a repair done. For a brand new $3,700 fridge that doesnt work within a week of install I just cannot believe they would sell a defective item and make their consumer suffer for it.What consumer would knowingly choose to purchase a defective appliance? If you end up getting a defect, the company should make it right....right away. Im at 2 months now without a functioning water dispenser on a fridge that is only 2 months old. Just disgusting.

I bought a Whirlpool Cabrio a few months ago. Every time we do a load of laundry, the clothes are not getting cleaned. Dark colored clothing, including grey clothing, comes out of the washer with white residue, streaked all over the clothes. We have to rub the residue into the clothes to make it go away. If we attempt to dry it and do not get the residue scrubbed off the fabric, when the clothes get dried, there are white streaks in the clothes. This is extremely frustrating. We spend a lot of time getting the residue rubbed into the fabric every time we do a load of laundry.The local appliance store has told us that perhaps we are using too much soap. We have used nothing but the high efficiency soap, as recommended by Whirlpool, and have reduced the amount of soap per their suggestion. It is now to the point where we are using hardly any soap at all, in the hopes that we would not have to spend 30 minutes working on the clothes after every load. That has not worked. The white residue is still all over the clothes, and since we are using less soap, I dont think our clothes are actually getting cleaned.When we wash a load of whites, they arent getting cleaned at all, even when we use bleach. In fact, when I compare brand new undergarments with recently bought undergarments that have been washed a few times, the ones that have been washed a few times are noticeably different in color, they are actually starting to turn grey in color.I have used Affresh in the washing machine, per the manufacturers suggestion, numerous times. We had thought maybe that was the problem. But even the load right after the Affresh treatment leaves the white residue or does not get the clothes cleaned.This washing machine was close to $700.00, and I feel that for that amount of money, I should be able to expect clean clothes. I have never had a problem with a Whirlpool product before, so I had no qualms about purchasing this washing machine. At first, I thought maybe it just needed to get broken in, that it would stop leaving the residue after it had been used a few times. However, that has not been the case. I have tried everything I can think of to improve the performance of this washing machine, but nothing helps.When I contacted the local appliance store to complain, they suggested I cut back on the soap. I told them that I had tried that and it didnt work. They told me to use Affresh, I told them I did that. I asked them if they would take the washing machine back; let me trade it in for something else. I would even be willing to get a cheaper washing machine, I just wanted something that worked. They told me they couldnt do that. Even though I was still under warranty, unless it was broke, they couldnt do anything, and even then, all they could do would be to try to fix it. They couldnt take it back and give me a different washing machine.The experience I have had with this washing machine is the worst experience I have ever had with an appliance. I had always thought of Whirlpool as a trusted brand for appliances, but if this washing machine is any indication of how they now makes appliances, I will never buy another one of their shoddy products again; and you can guarantee I will be telling my friends, family, and coworkers not to buy Whirlpool products either.

In April of 2016 I purchased an aqua clean self cleaning oven from Colders Furniture in West Allis Wisconsin. We were told by the sales associate that the oven was top of the line. This was a complete and utter bold face lie. I cleaned the oven for the first time the day after Christmas after having prime rib. I followed the instructions to a T on how to clean the oven. I had to turn the oven on 6 times and scrubbed the oven until my fingers were bleeding, not to mention the enamel on the inside of the oven is completely bubbling. I called the customer care center on December 31, 2016 and the representative basically said I was an idiot and did not know how to cook. They made an appointment to send a technician out on 1-5-2017. Before hanging up the phone the technician informed me that if there was nothing wrong with it that I would have to pay for the call. At this time I became irate and refused telling them that I have not even had the stove for 8 months and that it was still covered under extended warranty. I will see what kind of smoke is blown up my rear end. The technician is sending a new sponge and scraping stick. How about someone to also clean this piece of garbage. My advice is to anyone is if anyone tells you to buy an Aquaclean self clean oven from Whirlpool run in the other direction and do not buy it. Thanks Whirlpool for the garbage and for sending me cleaning products that are not even worth a damn.