Whirlpool fridge still freezes water in the bottom of freezer... after five service attempts. We purchased a five-year warranty and so far, they claim that as long as the warranty is good, they will continue to warranty it. We now have three and a half years left. We have currently owned our refrigerator for just over a year (approx. 18 months). During this time, it has had the same warranty repair issue that has been serviced five times so far. We now have an appointment for a sixth time since RC Willey does not want to fix a lemon the right way. The first three warranty repairs were under the manufacturers warranty. We are now under a warranty (extended) that was purchased from the place we bought the fridge from, RC Willey.I want my money back on the whole deal. I was going to be civilized about it because I thought they were common sense decent place to buy from. I thought they would, through common sense, realize that this unit is a lemon and allow credit towards another fridge. In just the past two years, we have bought from RC Willey over $10,000 worth of flooring, appliances, etc. and thats not counting previous years.

It doesn’t drain and ties clothes in knots. Spots appear on clothes after washing completes. Clothes never get clean and always have an odor. This is the worst washing machine on the market.

We bought all Whirlpool Gold Appliances when we re-did our kitchen 5 years ago -- fridge, d. washer, oven, glass top stove, and microwave. Recently I noticed a pool of water in front of the fridge. Turns out there is a sticky grommet problem that prevents moisture from draining into a pan on the inside back bottom of the fridge. Whirlpool will send you a replacement part that is totally different than the original poor design (a long hose affair) BUT wont pay for the labor to put it in unless the unit is less than 2 years old.I watched a video showing how to do it, but it looks pretty tricky and involved plus risky because you can break the drain pan in the process. Spoke with a Whirlpool rep and a supervisor -- both admitted to a quality problem but got nowhere on the labor. Theyre sending the part, and the supervisors supervisor is supposed to give me a call, so well see if they eventually do the right thing and cover the labor. I mean cmon... the parts obvious a bad design, or they wouldnt be sending a totally redesigned part! Covering the labor only if its two years old or less? Even the Whirlpool techs online are saying the problem happens after about 4 years! The grommet gets sticky and wont drain due to heat from the compressor, and that takes time to happen. Ill update this when I hear back from Whirlpool.

I bought a Whirlpool Cabrio a few months ago. Every time we do a load of laundry, the clothes are not getting cleaned. Dark colored clothing, including grey clothing, comes out of the washer with white residue, streaked all over the clothes. We have to rub the residue into the clothes to make it go away. If we attempt to dry it and do not get the residue scrubbed off the fabric, when the clothes get dried, there are white streaks in the clothes. This is extremely frustrating. We spend a lot of time getting the residue rubbed into the fabric every time we do a load of laundry.The local appliance store has told us that perhaps we are using too much soap. We have used nothing but the high efficiency soap, as recommended by Whirlpool, and have reduced the amount of soap per their suggestion. It is now to the point where we are using hardly any soap at all, in the hopes that we would not have to spend 30 minutes working on the clothes after every load. That has not worked. The white residue is still all over the clothes, and since we are using less soap, I dont think our clothes are actually getting cleaned.When we wash a load of whites, they arent getting cleaned at all, even when we use bleach. In fact, when I compare brand new undergarments with recently bought undergarments that have been washed a few times, the ones that have been washed a few times are noticeably different in color, they are actually starting to turn grey in color.I have used Affresh in the washing machine, per the manufacturers suggestion, numerous times. We had thought maybe that was the problem. But even the load right after the Affresh treatment leaves the white residue or does not get the clothes cleaned.This washing machine was close to $700.00, and I feel that for that amount of money, I should be able to expect clean clothes. I have never had a problem with a Whirlpool product before, so I had no qualms about purchasing this washing machine. At first, I thought maybe it just needed to get broken in, that it would stop leaving the residue after it had been used a few times. However, that has not been the case. I have tried everything I can think of to improve the performance of this washing machine, but nothing helps.When I contacted the local appliance store to complain, they suggested I cut back on the soap. I told them that I had tried that and it didnt work. They told me to use Affresh, I told them I did that. I asked them if they would take the washing machine back; let me trade it in for something else. I would even be willing to get a cheaper washing machine, I just wanted something that worked. They told me they couldnt do that. Even though I was still under warranty, unless it was broke, they couldnt do anything, and even then, all they could do would be to try to fix it. They couldnt take it back and give me a different washing machine.The experience I have had with this washing machine is the worst experience I have ever had with an appliance. I had always thought of Whirlpool as a trusted brand for appliances, but if this washing machine is any indication of how they now makes appliances, I will never buy another one of their shoddy products again; and you can guarantee I will be telling my friends, family, and coworkers not to buy Whirlpool products either.

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

In July 2018 I purchased a coin operated commercial front load 27 in washer and dryer. It was placed in and used in a six unit apartment building occupied by 8 long term adults. Prior washers and dryers had been operational for years with minor repairs at times. In June of 2019 the interior cement center balance on the top of the washer drum broke with resulting damage to screws securing the center balance and potentially other unknown parts. This was reported to Whirlpool customer Care service and they referred me to one of their a repair services. The repair service in about early August repaired the washer.In late September 2019 the cement balance broke a second time and this was again reported to Whirlpool service who requested I notify their recommended repair service. On inspecting the washer the repair service stated the entire washer was required to be rebuilt. The labor for installation of would cost me $1,125 with Whirlpool providing the parts under their warranty. The $1,125 labor cost was just under what I paid for a new coin operated front load washer. I reported this to Whirlpool whose supervising staff, without any inspection of damaged washer as to determine whether the washer was fit for its purpose when sold as a commercial washer, rejected any replacement of the less one year old washer and insisted they would only pay for the parts and I would have to pay for the labor, particularly when the both the cost of the replacement parts and the labor would be substantially in excess of a new machine. Due to time and effort constraints the problem was resolved by simply dumping the defective washer and purchasing a new commercial front load washer from a more responsible company.

Three years ago I bought a bottom freezer Whirlpool Gold refrigerator from Lowes. Two days after it was installed, I noticed a pool of water on the kitchen floor. This happened again. I called Lowes and they brought out another refrigerator, same make and model, and took the first one away. A year later the same thing happened. I had it repaired - quite an ordeal for the technician. He had to order a part and found it difficult to actually get into the freezer. Now after a year and a half approximately the same thing is happening. I cant afford to continue the repair bills and dont like the inconvenience (what if this happens when Im away from home?). The pool of water is substantial - its as though the defrost is simply emptying through the front of the freezer onto my floor.

July 2017 I purchased a Whirlpool refrigerator Model # WRF757SDEM00 S/NK51709722. The refrigerator portion went out, the repairman said it was the fan therefore I spent 351.00 dollars for house call and fan. When that did not work the repairman spoke to whirlpool and they said the panel of small computer may go out with it 212.00 plus tax. Did not allow that and tried another repairman who said the value that switches from freezer to refrigerator was out and if I could find someone to fix it would cost between 600 and 800. I went out and bought a Samsung because on the front said 10 year warranty. At least anything is better than 1 year whirlpool offers. There is NOTHING in the name.

I am a single mother of a 5 year old and I take care of my mother as well. I purchased a whirlpool because I believed them to be reliable, boy was I mistaken! I am in the military and while on an 8-month deployment I got a message from my mother that the washing machine had stopped working. Here is my mother who cannot drive - with laundry bags and a 5 year old in tow walking to the laundromat to wash, only to carry wet laundry back to the house to dry. Thanks a lot Whirlpool! My cousin in Michigan tried to help my mother with the company and a repairman as much as possible from over the phone. Here is what I got:The washer repairman came this morning. He did the diagnosis but I did not approve the replacement parts and repairs. First of all, he said that the motor control board was bad. To replace it with a new board would be $503 and a refurbished one would be $490.03. If the motor control board was replaced, it might fix the problem with the user interface. If not, the cost to replace that would be $302.62.Apparently there are 4 boards that could have problems. He also said there was a problem with the start button. Anyway, we ended up paying for the service call ($129), but I thought the cost for the replacement parts was too much to justify when we could get a new one for about the same cost. He recommended that we get a Service Contract when buying something new because of the cost to replace the parts.While doing some research online, unless you purchase an extended warranty or have experience in 2M; you will be researching new washers every 2-4 yrs. What happened to built to last? It seems to me all this technology/circuit boards/computers to make things work have degraded the appliance quality.Im sorry for the bad news but I just wanted you to have all the info. Let me know what you think. I know the washer is only a little over 2 years.

I purchase Whirlpool refrigerator. After a year it has done nothing but give me problems. Thank God I purchase insurance for repairs. I had the refrigerator fix over 3 times. First the water and ice wasnt working so the filter had to be change. Then the ice was made and my refrigerator start leaking. The repair guy stated the fan and something else is not working. I am a single mother struggling and to spend over a 1000 dollars for a refrigerator that does nothing but give me trouble. I am totally unhappy with this product.

I purchased a Whirlpool fridge (model GX2SHBXVQOO) on November 27, 2010 and it leaks water on my floor. I have to keep a towel there or it runs all over. I also purchased a Whirlpool range (model YGFE461LVQ) and the convection fan went on it a month after we bought it. The manufactures warranty does not allow repair people to travel any further than 100 km to repair, something that we had to take the stove in to be repaired. We got the stove back the same day and brought it home. Low and behold, after a short period of time it started to rattle again and got steadily worse. Also, now my one burner on high does not stay on high; it keeps going out then coming back on.I have called the place we purchased these pieces of junk from and they said there is nothing they can do. I also sent e-mails to Whirlpool and they said they will look into it and get back to me. That was months ago. I called Whirlpool and was basically told that there was nothing they can do, that I was to call the repairman. Never, never, ever buy a Whirlpool product.

Whirlpool model EVLl201NXRQOO, serial no. EWT2423236 - Defective paint on the back of the freezer that caused rust to form and paint to peel off. Whirlpool does not warrant manufacturing defects on the paint. Guess I was lucky for it to be on the back and not the front.

Buy anything else. This WHIRLPOOL WITH STAINLESS INTERIOR WDF560 SERIES is the worst dishwasher Ive ever owned. Huge fail Whirlpool. MADE IN THE USA! I will never buy another thing you make again. I cant say ONE redeeming thing about this dishwasher. I hate it! It has a high temp wash, a Sani cycle & heated dry + a stainless tub. Using all of the above + having an SS tub yet everything comes out dripping wet. The cheap silverware baskets are poorly designed & positioned on the side to the back in addition to a tall tub making it difficult to access anything in them. The baskets are also cheap and poorly designed. All the spacings are the exactly the same with no proper spacing for pots, pans or larger items. These cheap racks will have a short life. Its outrageous to spend 649.00 for such an inferior product. Buy a cheap dishwasher! This thing is no better than a builder grade that looks good.

I love my stove and all of its features. My stove is easy to clean and I Love the self cleaning oven. I have a flat top so that helps when it comes to cleaning, not to mention it makes cooking a breeze. I love all the push buttons and how smart my stove is. I highly recommend my Whirlpool to anyone looking for a great appliance.

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

Bought the dishwasher 3 years ago and now its not worth anything as its pump gave away. Cost to replace the pump is $200 or more so it doesnt make sense to do that since you can get a new one for $300-$400. Everyone I talk to say they are not building these as they use to and they give out in 2-3 years. I am very unhappy with this dishwasher.

As very happy owners of a previous model of this fridge freezer when ours needed replacing, we went direct to Whirlpool and bought the latest model. What a mistake! Other comments on this site are so accurate if only we had seen them before. A kitchen floor covered in ice mush (cubes seem out of the question) and tepid water from the water dispenser whereas on the previous model it was chilled. Basic functions that the previous model excelled at. Sadly it is also badly designed inside the fridge. We raised these issues with Whirlpool within our first year who merely said sorry you are unhappy and thanks for your comments. Be very wary of Whirlpool products and service.

We purchased the Whirlpool Cabrio washer & dryer. The glass lid design is VERY POORLY constructed and should be replaced by Whirlpool. We paid over $200 the first time the lid broke and was told this is going to be a continuing problem. They were correct! We subsequently replaced the lid 2 additional times only to have the same break on the right hand side causing the lid to pop up. Something must be done and WHIRLPOOL need to care for their machinery. They should replace the lids or provide a major incentive for consumers to replace the washer. PLEASE DO SOMETHING!

We purchased a Whirlpool Cabrio washing machine on 3-18-16. In February of 2017 the washer died. I was bleaching my whites at the time so most of the clothes, whites fell apart because they sat in bleach and water for 2 days. I had to figure out how to get them out without getting bleach and water all over my clothes. I called whirlpool and they got someone to come fix it. The tech came and said we needed a new control panel. We waited 3 weeks for the panel. He came on 3-24-17. He put the part in. Took less than 10 min and said, All set. I went downstairs and put a few things in. I was a bit leery and the machine started. I went back upstairs and I hear beeping. I go back down and the machine is flashing again. I called the repair people they said, Unplug it for 10 min. It may reset itself. If it doesnt, call back. It didnt. I called back and wanted me to wait till the following week. I told her I had clothes in there.Someone came the next morning and said it needed a harness and they would order it. Well its the 28th and I havent heard anything. I have called whirlpool several times with no satisfaction. We had the machine less than a year and its been dead for 2 months. I am disabled. I have multiple sclerosis so every day is a new issue. I hate to put that in here but I want you to know what Im dealing with along with a dead washer. Any help you can offer would be appreciated.

I have a refrigerator model WRT359SFYM00 that is 4 months old. It suddenly just stopped getting cold. Trying to contact Whirlpool warranty/service department has been a nightmare. Once I did get them they spent almost a week trying to locate someone in my area to service it. I was in constant contact with the phone support person, but they kept telling me its out of my hands a special unit was making calls to find a repair person. After almost a week they informed me they could not find anyone but if I could find someone to service it they would reimburse me (max $250 labor). I spent 5 minutes and 1 phone call and I found someone.They wasted a week bumbling around with wanton disregard for their customer. Their service after the sale is deplorable. They are staffed by people who answer calls but have no ability or authority to fix a problem. Worse yet, they kept telling me it was out of their hands. If not in their hands, then whose? I assure you I will never buy another Whirlpool appliance simply based on this warranty experience. What a horrible way to treat your customers. Shame on Whirlpool!

I purchased this range 7 2013. I was a snowbird at the time so after November I went south. Upon returning my top oven when lit had a gas smell. It took three weeks to get someone out and was told it was the igniter and would cost 350.00 to fix. I then called dte gas for them come out as I have full house warranty. Since then five calls a new igniter and a new board just put in two weeks ago the board doesnt work. This unit has been discontinued. I would like to know why. And if there is a class action suit against. Whirlpool. Co.

I purchased Whirlpool dishwasher, model DU930PWSTO, in 9/2007. It quit working in 5/2012. I expected an appliance made by a reputable manufacturer (Whirlpool) to last longer than five years. It seems like a manufacturing racket where they build these things only to be replaced a short time later. With service calls and parts replacement, its cheaper to buy a new unit. Talk about a circle jerk! And who the heck puts anything else but SS screws in a water soaked appliance? Duh. Rust! Im disgusted and dissatisfied with the whole company. Im still waiting on their response to my complaint email; at the time, the machine quit working. Whatever happened to pride in American made products? Or, did this get company bail and were now slaves to the Chinese junk once again? Ill never buy another Whirlpool appliance again. Does anyone have anything good to say about this company? I wish I would have read this blog before purchase.

The unit is electric and Im not impressed with the oven temperature consistency. The oven either runs hot or cold so trying to bake anything to perfection is a challenge. Ive added a stand alone thermometer just to ensure cooking properly.

A little over one year ago, I bought this model from Lowes. Shortly after installation, the ceramic coating on the floor of the bottom oven cracked and shattered. I contacted Lowes... No help whatsoever. I then fought with Whirlpool for weeks until they agreed to replace the unit. Seven months later, the floor of the bottom oven, once again, cracked and shattered. I am now in another dogfight with Whirlpool. This appliance is garbage and Whirlpool does not stand by their product. Do not buy any Double Ovens from Whirlpool. My next step is to organize a class action lawsuit.

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

Cabrio washer and dryer are not energy saver by any means! Have had the pair for almost 1 year and have spent at least 3 years of washing and drying time with these. What use to take 30 minutes to wash now takes at least 48 or more and the dryer has to be run twice on lots of loads to dry! The other thing is, with no water in the tub it really does not have a soak cycle to get really dirty stuff clean, so you wash things 2 or 3 times! Now I know why I see these washers and dryers like new in the used stores for $200 to $300. Thanks for the junk Whirlpool.

Whirlpool model WRV986FDEM Purchased May 31, 2017 from Lowes. Cost: 2,638.10 including 229.97 for the 5 year extended warranty. We’ve experienced four failures in the nearly four years we’ve owned this lemon. The first failure occurred within the one year manufacturer’s warranty period. The three failures since then have been fairly close together. Control boards and mechanical parts have been replaced. We are now waiting for a “made to order” part, with no scheduled delivery date. When I pressed Lowe’s on the reliability of this fridge, I was told that if four failures occur during the extended warranty period, they would give us a replacement. Considering the delays in repairs and frequency of failures, this is unacceptable. Do Lowes and Whirlpool expect their customers to just suck it up and do without a refrigerator for months while we wait? The warranty is worthless without prompt problem resolution. Whatever happened to real customer service?

I have owned this Whirlpool Refrigerator French Door MODEL WRF990SLAM01 for less than 10 months. The ice machine broke down completely a few weeks ago. We called Whirlpool and they sent a repairman out the following week. He left saying he had to order parts. About 8 days later, they called to let me know they have the part in and scheduled a time to fix it. They put the new part on and said ice should be coming out in the next 72 hours. It never happened!! Not only did the ice maker stop working, the freezer stopped working which was about $300 worth of frozen meat/goods down the drain. I called the appliance repair guy. He said, I was worried about that, this product is known to have these issues. I asked, Does Whirlpool know? He replied, Absolutely, they have a kit to fix this but its not 100% guaranteed to fix this issue. REALLY?!!! I called Whirlpool and they could have cared less. There were no apologies, no type of compensation (exchange/replace). It is now going on day 22 and we still have no ice or freezer. This fridge cost me $2500 and four requested days off so I could wait for the repairman. Whirlpool, you as a company should be ashamed and outraged. You are more concerned about the bottom line of recalling these lemons and forgetting the impact you are having on us consumers. How many people are going through this issue that will not under any circumstance purchase a Whirlpool product again? I am so happy I am not investing in this company as this will impact this company in the future. They may be selling quite a few now to new homes/builders but when the word gets out what type of product they are selling and not repairing prior to the sale and knowingly letting people buy these, it leaves quite a bit of culpability on their hands. IF you are going to sell crap product, then stand behind it and repair/replace it prior to selling it to retailers!! You are a pathetic company!! STAY AWAY FROM WHIRLPOOL PRODUCTS!!!

I purchased a Whirlpool accubake oven in 2010. The repairman has been out to repair it 5 times. Thats right 5 times. It wont maintain the baking temperature. They have changed the mother board, the ignition switch, the harness, and the thermostat. Every time the repairman leaves it works and then I go to bake something and it doesnt. Once it reaches 350 degrees the oven cuts off. You can hear it trying to ignite but its like the fire doesnt catch. I have to shut it off, press bake and heat it up all over again. This is so annoying. Bad thing is I like the look of the oven but clearly this is a shotty product. I will never buy a Whirlpool again.

Replaced the “brain” twice. No hot water for 2-4 days each time, waiting for part to arrive. Now I have to replace the nylon drain valve because it won’t shut off. Gonna use brass replacement. Fortunately I have it drain to a sump pump so house isn’t flooding. Don’t buy Whirlpool water heater from Lowe’s unless you enjoy this kind of thing. Consolation: the folks at the help line always answer the phone and are knowledgeable. And they’ve heard these same complaints over and over. One guy even said to buy AO Smith as they are made in Tennessee instead of China.

2 years ago, I bought my fridge from Home Depot and the delivery people did not leave a manual. I call to see if they could provide me one because I don’t know how to operate some parts of it. They told me they don’t send manuals anymore. She referred me to a website to download it from an online site. I told her I don’t have a computer. It would be easier if they can send me something in writing and this lady told me that they don’t. She asked- “and you come to us after two years? What have you been doing in the meantime? “And from then on she was very rude and she transferred me to another lady that was worse! I do not need this! And the fridge is very noisy. I’ll never buy Whirlpool again.

We have a wtw5500xw2 washing machine we bought 03/2012. We can no longer use it. The machine would not spin or agitate so the clothes do not get clean or get the water out and after the cycle is done we have to wring them out after to be able to take them to the laundromat. So two repair companies and 3 months later we find out that it is the wiring harness that is the culprit. After a new motor and a shift actuator, we contacted Whirlpool only to be advised that the washing machine is out of warranty and that we are out of luck. If the company has a known issue about these wiring harness they should be looking into it and changing suppliers or offering to replace the wiring harness at a discount to its customers. I will not be buying a Whirlpool appliance ever again. I would recommend going with a Kenmore. I have had a Kenmore dryer that I got 19 yrs ago that we got used and only had to replace the heating element.

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

I bought this piece of junk Whirlpool Cabrio washer two years ago and it’s been nothing but junk. Just like everyone else, this thing has never gotten my clothes clean no matter what I do. Anything with a drawstring or straps gets ripped up or stretched out. It’s loud and shakes, even though it’s leveled. Now, to top it off, it’s leaking water from the basket seal. I called Whirlpool and they couldnt give a damn. Since it’s out of warranty, it’s my problem, even though she said they know this machine has a lot of problems. So now Im stuck either fixing this thing or buying a new washer. Every appliance in my house is a Whirlpool and Ive had nothing but problems with several of them. I thought when I bought the brand it was a good brand and they stood behind their stuff. Boy, was I wrong! I will never buy Whirlpool again! They should recall this washer!

Whirlpool Energy Efficient Top Loader - I re-wash at least 20% of all clothes because they have dark spots AFTER washing them, but NOT before! It is a moving target, wash out one dark mark; get another somewhere else. I bought great quality sheets that are permanently stained, because of this. No matter how you load this machine, anything with arms and legs gets entangled into a big knotted mess. It is difficult to separate them and time-consuming. This puts a lot of stress on the clothes, especially as the load spins. I also re-wash entire loads at least 4 loads because the clothes dont rinse properly. I bought a 5 yr. extended warranty and have had this serviced at least 4 times to no avail. THE PROBLEM IS IN THE DESIGN! I am POSITIVE of it. If you have these problems, as well, please contact me. I would love to investigate a class action suit. I am THAT mad.

I bought the WTW4815EW0 Whirlpool washer. Worse machine ever! It’s take forever to wash a load, there’s no way it’s efficient when it takes twice as long to wash one load. It doesn’t sense the water level correctly, Its noisy, and after only having it 3 years it crashed on me. I refuse to waste money fixing the piece of junk and when I go to purchase a new one it won’t be a Whirlpool.

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

Our over-the-range Whirlpool Microwave (Convection-Type) died 17 DAYS after one-year-warranty expired BUT theyre sending a local repair outlet out to fix it. I am very surprised... Thought Id be stuck with a $700 boat anchor. Thank you Whirlpool for standing-by your product. BTW... My research indicates these microwaves die quickly if you use the convection option very often... So now we know better.

I bought front-loader WFW8540FW1 in November 2017 from Lowes. I keep having problems with the washer not turning on. I am waiting for the repairman to come. Had repair done in March, May, and now June. I have gotten new electronics for replacement from Whirlpool each time. Obviously something is defective. Is there a lemon law for washers? Hope so. Never buy Whirlpool Washer again!

I just bought this water heater on 2/12/12 and it has already started having problems. I got a self diagnosis of the gas valve needing to be replaced. I think that if this becomes an ongoing problem, whether I have a warranty or not, I’m going to trash it and go with another brand. I shouldn’t have to pay to have the gas valve replaced.

The ice builds up over two week periods and begins to leak onto the floor, requiring me to empty the freezer, chop out the ice and put everything back. The repair job is in the vicinity of $100. Check the net. This problem is endemic. Since this is a problem created during the manufacturing process, Whirlpool should be fixing this problem free of charge. I will never purchase another Whirlpool product.

Whirlpool Water Heater bought May 2011: Water heater not heating. I called Whirlpool and they stated the equipment is under warranty but not the labor; $137.50 for 1st hour of service. Troubleshooting is a joke. It just doesnt heat. Waiting on the 3 plumbers to call me back. They are busy. Water heater went out Sat morning and Whirlpool doesnt open until Monday. Its Monday at 5pm and Im still waiting on a call back.

My 3 year old Whirlpool refrigerator costing $1285.86, needs a new motor and fan. Of course it died right after a trip to the grocery store. On a week temperatures were well into the 90 degree range. Needless to say my groceries had to be thrown out at a cost of an additional $250. How convenient that the refrigerator died 2 months after the 3 year protection plan ran out. I just spent $182.94 to have a repair person come and check out the refrigerator. I will need to spend another $170.00-$200.00 for the motor and fan once the parts come in, which can take up to another 10 days. Had to go out and buy a backup refrigerator that cost $562.38. Also had an issue with this refrigerator after a year and half with ice building up in the bottom of the freezer. Luckily we had the protection plan at that time, otherwise that would have cost us $157.58. The refrigerator is stainless steel and I have a terrible time keeping the rust off the front of it. At this point l guess all I can do is warn everyone I know to never buy a Whirlpool appliance if this is an indication of how they manufacture their products. So very disgusted with this refrigerator! Sad my old Frigidaire was close to 30 years old when the freezer just wasnt freezing well anymore. Thats why my new backup refrigerator is a Frigidaire and not a Whirlpool.

It started getting warm and wasnt getting any warmer. Model number ED2VHEXV001 22 cubic feet side by side. I read another review and it sounds just like mine, OMG. It better just need something, its less than three years old. I am not happy and I always bought Whirlpool, my first trouble with it.

I have had my Whirlpool electric oven for so many years that I don’t even remember when I purchased it. I also have a Whirlpool stove top & the same with it. Zero trouble for many years. I highly recommend Whirlpool range tops & ovens.

The clock-timer went out. Appliance is only 1yr. 6mo. old. I CONSIDER THIS STILL A NEW APPLIANCE. This is the 2nd Whirlpool appliance, I bought a Whirlpool washer & dryer. The washer went after 2yrs. use. I bought a Kenmore used washer and it still works. I paid cash for the stove. It was bought at a Sears outlet in Cudahy, WI for $398.58 total with the one year warranty. I really have not gotten the use of the price. I guarantee you (this company) I will NEVER buy another Whirlpool appliance again. TOO BAD YOU COULD NOT RETURN A PARTIAL OF THIS MONEY TOO ME!!!!! I have a Sears repairman coming today 8-3-13 costing me $75.00 just to walk in the door.

After less than 3 years it was the bearings, of course. Then, being handy and not stupid enough to pay the $500 for the whole piece of crap Whirlpool/Maytag tub, we bought bearings from the PartsDr. We just didnt dig deep enough to know that the strators on these things are made out of the cheapest Chinese plastic and are cracked in the SAME TWO PLACES EVERYONE ELSES IS!!! Imagine that? Will scrub my clothes in a river on rocks before I ever buy a Whirlpool/Maytag Chinese again. All front load seem to have the same problems but at least some other companies admit it and are trying to correct it. Will research and as with everything else stay away from the USA/Chinese rusty, corroded junk.

I am writing due to the defects and flaws in my recently purchased appliances. I chose Whirlpool believing I was buying the highest quality for longevity purposes. Every appliance I own is Whirlpool or Maytag - same company. I purchased warranties and was told the warranties dont cover my issues and was basically brushed off. I am infuriated. Here is a list of complaints. Refrigerator is cracking on the inside on the inner door and at the bottom. These cracks surfaced within the first year of purchase. The warranty does not cover cracks in the inner body.The oven/range has an exhaust that bellows out of the top of the range in a way that the smoke curls up onto the panel and discolors it. I have never had an oven constructed with an exhaust pipe in the front that pours smoke onto the range itself and into your house. The dishwasher paint has rusted off on the door as have the screws on the inside of the door. The cover panel on the cleaning dispenser of the washer has popped off and cannot be popped back on, hence the guts of the dispenser are always visible and when I go to load the cleansers the front has to pulled out from inside the dispense.The refrigerator is also leaking from the bottom and the ice-maker no longer produces ice. This started off and on for the past 2 years. At first I thought the leak was from a near by window. No it is the refrigerator. All of these appliances were purchased in 2013, 14 and 15. New. I am 56. I have never had issues like this ever in my life growing up or as an adult. Appliances lasted forever. I am one person. How much damage could I do? None.These are flaws in chemical compounding of the paints and materials for cracks and rust. Whirlpool was called various times and was not interested in sending a rep to verify my claims. They said all of my warranties did not cover such issues only motors. Lots of many spent in vain. I will not purchase Whirlpool again as they seem disinterested in customer satisfaction.

The Whirlpool washer and dryer I bought new four years ago has been nothing but a giant on-going headache. No end to the error codes for washing machine. The dryer knobs broke off after two years. The washing machine works only when it feels like it, and important pieces that get a lot of wear are made of plastic. I will never buy Whirlpool again. Ever. Good luck to anyone that is brave enough to buy Whirlpool appliances. I have to say it again: Whirlpool is garbage, junk and unreliable.

I purchased a Whirlpool electric stove WFE540HOES 3 weeks ago from Best Buy. 2 Main complaints: Extended cooking time when using the oven. Food that should bake in 14 minutes was taking 25. Food that should bake in 30 minutes was taking 50, etc. The big issue was that the exterior of the stove was getting extremely HOT when using the oven. The area behind the handle and the storage drawer were so hot I had to use a towel to open it w/o getting burned. Thought it was a faulty stove so I exchanged it for the same model. Just got the replacement and its worse than the 1st one! The heat permeates from the bottom of the door and heats up the storage drawer below. The area behind the handle and the enamel edge of the stove get so hot. Its definitely a safety hazard if not fire hazard. Anyone else experience this??? Its going back!

In all of my 50 years of marriage and buying stoves, I have never had an oven breakdown. I live in Canada - I purchased three appliances, all Whirlpool 2 years ago. I had to have a service call on the fridge three weeks ago - a little rubber nipple was clogged up and water was running into my freezer. Bill $100.00 - two weeks ago, the broil element in my stove would not turn off when the bake cycle heated up. Actually, you did not have to press the fast heat button as the broil came on by itself. I have been waiting almost two weeks for the part - today I was told it would be another week. The part has to come from the US - what ever happened to Whirlpool Canada???? - I am told the bill will be $350.00 and maybe more plus the service call. I do not find this acceptable. What do you do when you have already invested the money in the product. Bring back the old Moffat stoves. I would like to be reimbursed for the money I have put out and will put out.

I purchased Whirlpool 6.2ct electric range on 3/16/2013 from Lowes, Fremont, CA. I tried to bake my cake on 11/19/2013, and preheat it to 400F degree. When the temperature achieved to 400 degree, I put my cake in not even 5 minutes and go to dining room to pick up something. When I turn around, I saw the oven window is so bright and I open the door right away, it has fire from the left side bottom. I turn off the power right away but still has big fire. So I use the fire extinguisher to get the fire off.I went to Lowes to complain, this product is still under the manufacture warranty and I also purchased two years extended warranty from the store. Lowes sent the 3rd party technician over to check, they open the bottom element and insist I drop something to catch on fire. He tried 350F degree is working. But the fact is, theres nothing dropped, no oil, water or and any ingredients, only fire extinguisher powder all over the bottom. Technician put back the cover, I asked him, How do I clean up the bottom extinguisher mess? He said, You dont need to, just clean the top, and wont try 400F degree for me since the top didnt clean up. I asked him, I am so fear to use it now, you asked me to clean it up and try again. I only use my oven to bake cakes, cookies, and muffins, and that day the cake even not still raise yet. How could it catch on fire? Is this product defective? I doubt it.I also called Whirlpool, they said most likely its short circuit. They only provide the repair, unless it cant be repaired, then they replace it. Manufacturer also told me that my temperature is high. I dont think so. I have no problem to use any oven in 425-450 in the past. If this is high, why your stove has function to that high degree? I am so upset with both services. From my concern, nothing dropped to bottom and caught on fire. They all refused to replace the new one and asked me to continue using it. I really dont feel confident to use this one and dont know who can help me to replace it.

I was very excited when Melanie from Whirlpool customer service called me back about my complaint. WHAT A JOKE! I thought she was going to offer at least a repair considering by her own admission this same problem with my control panel of my double oven happened just last May (dead for the third time). Instead she offered me 15 to 30% off a new product if I bought it in the next 30 days! ARE YOU KIDDING ME?The first time the control panel died was when I used the self-cleaning feature. The oven never turned on again. Cost me hundreds. I have been afraid to use the self-clean feature ever since. The second time was in May and is no longer under warranty? Again it cost me hundreds!! Now I am supposed to be happy with 15% off another one of your products? Why would I have any faith in any of your products? I have since found out that Whirlpool has had so many problems with this model - they have quit making it. The repair man says Whirlpool cant make the control panels fast enough to keep up with all the repairs but this is still not under warranty - how about a recall? Do you guys stand by your products at all?

Clothes dont always come out clean. If there is anything more than 2 sheets in the washer, it becomes unbalanced and then goes through a rinse until the water is up to the top! You have to watch any heavy load for this! Today there were 3 sheets in the washer and sure enough it kept rinsing until I physically reached in and rearranged the sheets. Then when it was done and I pulled the sheets out to put in the dryer, they were SOAKING wet! I hate this machine and will NEVER get an HE washer again.

I bought my refrigerator model GX5FHDXVQ0 in 2010 and after this short amount of time, the control board went out. My repair cost was $446.05 to have it repaired. The refrigerator cost over $2,000 and to have to spend nearly $500 on repairs after only 2 years seems way beyond reasonable. I have Whirlpool appliances - washer, dryer and dishwasher - in my home and thought it was a very reliable name. I am very unhappy after reading customer complaints about the very same thing happening to them. I can also see that the company Whirlpool is not very concerned with customer complaints. I find this very disappointing. I will not recommend their products anymore nor will I purchase any Whirlpool products.

We have had our Whirlpool range for probably 20 years. We have never had any issues or problems with it. Our washer and dryer are both Whirlpool too. I would recommend this brand 100%! I think this is the brand that my mom always had too. Their products are very well made and last forever (it seems like they do!).

Had one double wall oven lasted 15 years with just about no problems until the control panel broke and could not be fixed. Bought another just like it and it is having problems after 6 months. Light wont work. Turn on from the control panel and the time does not work.

Purchased a Whirlpool refrigerator model WRF560SEYM in June 2014. In February 2015 the ice maker had to be repaired because of a leak. Now in February of 2016 the ice maker and water dispenser are leaking. Because the warranty is one year, Im basically stuck with a refrigerator that sucks. Not only is the ice maker and water dispenser broken, the door sometimes doesnt shut properly and the shelving couldnt possibly be more cheaply made. This refrigerator is in a vacation home and has barely been used. I have purchased many Whirlpool appliances on the past and have never seen such poor quality in an appliance. The only thing Whirlpool can offer is sorry youre stuck!! No more Whirlpool for me!!

Whirlpool fridge (model no ETILFKXKS) - I purchased this fridge from a very good dealer (Trail Appliances, Edmonton). Within a year, I had my first of the frozen water drain from top freezer to water pan. Of course, I blamed myself - too much warm food, blah blah. Now this is happening more and more often. The fridge is kept at number 1 of 5 for coldness. All foods are left on counter to cool, but three times over my Christmas holidays this year when I swore I would throw this fridge in the garbage - the drain froze, water all over the fridge, food having to be removed and placed in other peoples fridges, blah blah. Now it did it again this weekend! There are only two living here. I work all day and no one even opens the fridge much and again this happened. Im really sad that such a faulty product (too much insulation hiding the drain pipe behind the fridge and it must be much too small in diameter; otherwise, it wouldnt freeze up). Talking about work. We have two fridges there with 50 people using them all day and they run perfectly for the last 8 years that I have been there. So I think it indicates that my fridge is faulty. Im so sad too because I dont have the money for a new one. I just turned 65 and am about to retire (single mom). You would think that a $1,300 fridge would last longer than 6 years!

Shortly after the warranty expired my refrigerator started building ice on the floor of the freezer. With the build-up of ice the freezer started leaking on the bottom. Sometimes it gets so bad I have a hard time closing the freezer door properly. The Model# GB9FHDXWS06, Serial# K31505096 of my Whirlpool refrigerator. I do not recommend any Whirlpool product. Do your research before you buy any Whirlpool product.

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

I bought a Whirlpool water heater from Lowes. I had trouble with it from day 1. It never worked correctly. Their service department is terrible. All they want to do is sell you extended coverage policies on it. Every time I have it fixed, its never covered, and I have to pay again. You will be sorry if you buy a Whirlpool water heater.

We purchased a Whirlpool Dishwasher from the Home Depot, it was installed 3-28-2015, less than 30 days ago. On 4-21-2015 the dishwasher stopped working. I called Home Depot expecting a replacement; but we were told you have 48 hours; you need to contact Whirlpool, due to the CRAP warranty. I called Whirlpool, we were told that a TECH would need to come out and address. They came today, ** , told us that the Motor is bad. (NOTE I havent made a payment on this dishwasher). So we called Whirlpool, expecting they would replace. I spoke to ** who advised me they would not replace, only repair. I explained this is unacceptable for a new product. I demanded to speak to her Manager; Spoke to ** who said the same. I asked to speak to her manager, his name is ** , but HE DOES NOT DEAL WITH THE CONSUMERS, this is beneath his job class I was told. So NOW I have no choice but to have this Dishwasher repaired; it will take over 2 weeks to get the part. I just dont understand how this is good Customer service. It is the worst I have ever experienced.

I bought my house brand new with all new Whirlpool Gold Series appliances. About a year and a half from purchase date, I started having issues with my fridge, then my dryer, then my washer, then my fridge again and that lasted about 5 months, then my microwave and my dishwasher. My microwave stopped working in January. It’s now April and I still do not have a new one. It keeps getting lost or shipped to the wrong address or something. Every time I call, the representatives don’t know how to look it up. I wind up on hold for at least 30 minutes, and I get transferred to at least 3 different people. I hope my last appliance doesnt break because I’m over Whirlpool, and I will never buy another appliance from them again.

I purchased this Whirlpool washing machine model# WTW4950XW2 and after 10 months of use, it broke down. The repairman fixed it (gear box) and said that the motors and the control boards went bad. I didnt get a weeks use out of it because the motor went bad. He came and fixed the motor and it didnt work once after that. I called Whirlpool up and they sent their serviceman out twice and they didnt do much but reprogram it and both times it didnt do one full cycle. Now they (Whirlpool) are going to put a new control board in and hope it works. Whirlpool wants me to get another years warranty on the machine & charge me $100 and not do anything about all the money I spent going to the laundromat (2 months worth) while this machine was not working. There should be a recall on this machine for replacement & reimbursement of all the time and money lost.

Purchased a Whirlpool dishwasher less than 3 years ago. Absolutely horrible! The LEDs stopped working on the control panel within the second year. A few months after that the heating element stopped working. Replacing the element and thermostat did not help. The warranty only last for a year, and now I know why. Whirlpool does not stand behind their products and they were completely unwilling to help, and were quite rude honestly. I will never buy a Whirlpool product again!

I have never posted a negative product review but must do so now. The refrigerator is 1 1/2 years old at most and has been well taken care of. I noticed today that the finish at either side of the bottom of each refrigerator door handle has a problem. I couldnt tell if the finish was pitting or is just discolored. I called customer service and expected that they would help, especially since we have an extended warranty. Representative number one told me that the extended warranty only covers problems that affect the function of the product. I spoke to her supervisor and then her supervisor. I got plenty of apologies but no support. I offered to send pictures, but they were not even interested in checking out the problem.After speaking to them, I took the handle off and I see now that the handle cut into some sort of film that exists on the metal. (I am not talking about the protective plastic coating that is on the the refrigerator at delivery.) The film is lifting off the surface and creating discoloration. If Whirlpool was at all concerned, I think this issue could be fixed with some sort of gasket to keep the metal handle from cutting into the surface. Im hoping the problem is static, but hard to say what will happen. If they had been interested in trying to understand the cause of the problem, it would have been easier to accept the limitations of the warranty. It would have demonstrated an interest in avoiding this problem for other consumers in the future. My last Whirlpool product. Period. Good luck if you decide to do business with them.

I bought a whirlpool water heater at Lowes 4 months ago, and it has stopped working. I called the customer service number and was treated so unjust. I told them that I had just had it looked at by a plumber and he said that the water heater needed to be replaced, I told the whirlpool represented if what the plumber had just advise me. So I asked them if they could just replace it, the customer service representative told me I had to call another number to have their service people look at it and that wasnt for another 10 days. At which time I asked the representative what was I to do without hot water for 10 days. She told me that they could only schedule it that way. So Im here to tell you all please please please dont ever Buy anything from whirlpool because they will not back it up! I on the other hand just lost $500 and went out and bought a Rheem water heater instead.

Bought a Whirlpool Cabrio washer from Home Depot. It started making noises on the spin cycle 2 months after the purchase. A technician came out and concluded it was a clothes hanger behind the machine making the noise. False. Two days later I tried to wash a load. All the panel lights came on. And then the machine died. No power. The tech came out and tried to run tests but the machine would not respond correctly. Informed it has a bad control. The machine will malfunction even if a button is pressed too long. And then its repairman time again. This machine is poorly designed. No doubt whoever designed the digital control panel did not think about ease of use. The tech has to recalibrate the controls after every failure. Whirlpool and Maytag have put out a bad product and this will be my last.

Purchased a Whirlpool French door in April 2020 during the pandemic for 2K. The first week of owning it my fresh vegetables froze. I lowered the factory set temperature by one degree. The next week the ice maker stopped making ice. 3 days later it started up again. The 3rd week my freezer food defrosted and the ice maker stopped making ice. Called Whirlpool And requested a refund. They said, No we will send a tech. The tech determined the control board was defective. I had to empty the entire fridge and turn it off, defrost it for 24 hours. The headache to find someone to take your food! The part took 2 weeks to get replaced.The tech said, If this doesn’t work we will have to come back and take the back off to see what the issue is. Told to defrost again for 24 hrs. The ice was so thick we did it for 48 Hrs. 1 week later ice started to form in the freezer and the ice stopped working again. Called whirlpool demanded a refund and they said no. A tech will come again. I’ve relocated my food 3x already. How many more times can I do that! Whirlpool is not concerned about their reputation at all, as I read through other reviews of situations similar to mine. Do not buy whirlpool!

I purchased Whirlpool refrigerator WRF992FIFM00. On December 2016. It was cost $3400 but it stopped working after 6 months. I called Whirlpool for service. Technician came. Diagnosed it and he said he needs two parts but parts are not available. So he asked me call Whirlpool for help. I did call Whirlpool three times and the problem cant be solve. Whirlpool told me have to wait at least 10 days so they locate the parts so they can send out to Whirlpool contractor for repair. They dont have another solution rather than I have to wait until parts have available. I have to thrown all my food and I live without refrigerator. So what the point I need purchase extension warranty if they dont have parts to repair. I would not recommend anyone to purchase appliance from Whirlpool.

I purchased it new in July 2008 for $550, a single homeowner average 4-5 loads a week. First time it broke down, it was just inside the one-year limited warranty. It broke down again Sept. 2011, the basket separated from spinning mechanism. I learned that after $75+ missing day of work, repair tech quoted cost of repair $885 and a minimum of 10 days waiting for part to arrive.I called Whirlpool, the guy on the phone was nice but told me I was out of luck. Even if I had purchased the 3-year warranty, I would still be out of luck. The washer was manufactured in April 2008. What a piece of junk. Save your money and skip it. I wish I had. Aside: Whirlpool, whatever happened to standing behind your products? I used to think you were a quality brand. Im extremely disappointed and wont be purchasing any of your products in the future.

We bought the Whirlpool water heater and not long after, it quit heating. After many phone calls, we finally got a response and were told to get the replacement thermocouple. We did this and it was the wrong part. We found out that we had to have a right hand thread thermocouple. Now, the heater is out of warranty and we cannot keep it lit at all. It takes at least 3-4 times before it will light once and then it goes out every time the hot water is used.

I have had this range since 2008 and used the self-clean last week. (I dont use the oven that often) Since the clean it has not heated up to required temp. I just called Whirlpool and a tech is coming out this Friday (Nov. 15th 2013). If it is determined to be the self-clean that did in fact cause this, the tech calls for an authorization and the repair is covered by Whirlpool. I will report back what happens.

I absolutely hate this expensive piece of junk. I have tried everything, and my clothes are not clean. It is only myself, and my husband, and our clothes dont get very dirty. I would like to send this junk to the junkyard, but I spent a lot to get the dryer with steam that went with the washer. This experience has soured me on Whirlpool appliances, and now I learn they also make appliances for Maytag!

Bought expensive fridge 2009. Now (2015) random very loud rat-tat-tat sounds lasting 5-10 seconds. Very loud. Paid for repairman to evaluate. He said it was probably compressor spring and other springs would probably soon break and would shut down fridge. Said it is very expensive to repair and it would be best to dump the fridge and buy a new one. I called the 800 number located inside the fridge. Jacob at Whirlpool listened to my story and said, Yep, it sounds like the compressor spring and the other springs will likely break. He said he can make me a one-time offer of a full repair of the compressor for only $359.65. We pay Whirlpool and they will have a local guy here come and fix it. We paid by visa.And, via email we get a document that shows we just bought a service contract. This is a surprise to us as we were told were paying to have the compressor repaired. In a few days, a call comes from local repair shop. Guy says, he will come out and check out the noise and see if he can repair our unit. We tell him the noise is intermittent and we cant predict when the noise will occur. We also tell him Jacob from Whirlpool said it was the compressor and that we paid to have it repaired. He says it doesnt sound like it is the compressor and that he cant diagnose the problem if he cant hear the noise. We tell Maytag/Whirlpool via phone we are faxing formal request for refund of our $359.65. Lady from Whirlpool says we, should get a refund in 4-6 weeks. Well, we will see.We are very disappointed in the the short life of our very expensive fridge and we are disgusted with the false and misleading comments made by Jacob of Whirlpool. He told us we were paying for the repair of our compressor and instead we get a stupid service contract. We are in the process of buying a new fridge. And no... It will NOT be a Maytag/Whirlpool!

In June of 2010, I purchased a new Whirlpool Estate EED4400WQ0 dryer (serial number M01156261) with an accompanying washing machine. It has been in a clean, climate-controlled environment and gently used by my family of four for just short of two years. Last week, I began to notice that the clothes coming out of the dryer were cool and damp and it quickly became apparent that the dryer was only heating intermittently. This morning, the service person from the dealer who sold me the washer and dryer set (and a Whirlpool dishwasher a few months later) told me that contacts on the timer unit were bad and that the entire switch would have to be replaced. This is no small portion of the machine and the part alone will cost me about $150. After labor, we are looking at an expense of approximately half of the original cost of the machine - in less than two years. I called the Whirlpool’s customer service line to ask if there was anything that could be done and the answer was: Sorry, we cant do anything for you.” It is not acceptable to me for an appliance to become that expensive that fast. If Whirlpool cant do anything for me about this, then I will not be purchasing anymore Whirlpool products.

Aqualift technology does not work!! This is absolutely the worst product I have purchased from Whirlpool. The aqualift technology DOES not clean the oven, even if you clean the oven after EACH time you use it! I am not able to bend over and spend the afternoon in the oven. And even when I do, I cannot get this oven clean!!! Please DO NOT buy a Whirlpool stove with an aqualift technology oven cleaning process!!! You WILL be sorry!!!

Stainless steel fingerprints and rusting are terrible. The storage doors in the freezer have an open bottom which allows items to slip out which is annoying. The fridge has ample space for all my items without being overly huge for no reason. Great for 1-3 people. The rest is perfectly fine.

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

My Whirlpool French Door refrigerator will have its TWO year old birthday on September 15, 2015.. only if it lives that long! On August 8, one month and one week short of its 2nd birthday the compressor died. Of course the manufacturers warranty expired after one year. Thankfully, I purchased an extended warranty through the retailer. While this will cover my repairs, there is nothing that will cover the hundreds of dollars worth of spoiled frozen and refrigerated products which had to be discarded. I will NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT!

After almost 10 years, my Whirlpool top loader is now malfunctioning just like a lot of complaints here. It will not complete a wash because it keeps giving an off balance error at the spin cycle. I also had a coin get stuck in the discharge hose but fortunately it did not destroy the pump. I certainly dont want to sink any money into a repair especially because the techs dont seem to know how to fix the off balance problem. Im not much satisfied with my Whirlpool dryer either. It takes forever to dry a load.

Whirlpool Refrigerator model #GI6FARXXY0 - Bought this refrigerator at Las Vegas Store #3305 Home Depot, 12/07/2012. July 2014, the ice maker stops working. I replace it with another Whirlpool ice maker and that one stops and leaks water from the dispenser all over my floor. Im on my 3rd ice maker and its not working! I have no warranty but still...a refrigerator should last longer than this at these prices. Im trying to research problems with this refrigerator and it looks like now the refrigerator model has been discontinued! Cant find anything on it. I paid close to $1,800.00 and it lasted 1 year 1/2? Its turning into a money pit. My question is... after looking at all of the complaints concerning ice makers and water leaks on Whirlpool refrigerators... why hasnt Whirlpool addressed this problem with a recall?? Obviously, these ice makers are faulty even the ones you replace them with. The repairman told me there are no warranties and they would not take returns on them. Whirlpool knows there is a problem and doesnt address it. Consumers should be protected from businesses that know of problems and refuse to take care of them with customers. They are still selling faulty Whirlpool ice makers??? I paid extra to have a working ice maker and expected it to last more than a year and half for the price of this French Door, bottom freezer, refrigerator did. The doors look terrible as they do not clean nicely and leave streaks. From the looks of some of these complaints, this may only be a beginning of problems with this appliance. Totally disappointed in this product. I know I wont be looking at any more Whirlpool products. Im disgusted with their faulty products and no accountability. If theres a recall, count me in!

Purchased a Whirlpool Cabrio Washer 5 years ago because our other washer died after coming home from vacation. Its just 2 people in this household so I dont do mountains of laundry. The other machine lasted 15 years so go figure. We purchased the Cabrio from Lowes. Got the extended warranty but as it goes the machine fails when all warranties expires. Over the last couple of weeks this machine started to not complete a wash cycle. All lights go off except for spin light and machine stops. Even asked the person in charge of washers and dryers at Lowes about this who then told me to get an extension cord and plug it into a different outlet. Seriously! I have had to unplug the machine after it fails to complete cycle, wait 5 minutes or so, plug it back in, select rinse and spin, it fails again 13 minutes left in cycle, unplug again, plug it back in, select drain and spin, wait for it to MAYBE complete that cycle. Do not purchase this type of machine. Just for a technician to come look at it is $100 or more and to replace whatever circuit board is probably another $300 or more. Screw that! Going to find a good old fashion one if possible. Piece of junk. Not going to spend $700 or $1000 just to wash clothes for 2 people.

I have had my washer dryer set for only 3 years and have all the problems that have already been posted. Whirlpool has no recall on this washer (Cabrio) and does not plan on helping out anybody in any way. Their solution is pay for everything out of pocket or buy their one year warranty for ironically the price of what a new motor, and any of the other common items that are breaking would cost. And this is only good for ONE year. With the history of this company I would expect this to last at least ten years or longer before we start discussing replacing anything. I also had a Maytag that I had a problem with and did not get anywhere with that either. Whirlpool/Maytag, you need to stand behind your product. Your name is not going to get you anywhere nowadays. This blog has a spot about legal representation. If you can help me, please contact me.

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

I like Whirlpool, but the ice maker never worked right. Now l have to clean the ice off the dispenser about every three days. Other than that has been good. This is my third Whirlpool refrigerator.

I am very unhappy with the Whirlpool Cabrio washing machine that I purchased. Dark clothing comes out with lint deposits that will not come off. I have to rewash them at least one more time and then it does not always come out. I dont know if it is because the water level is too low or that it has no lint filter but I will never purchase another Whirlpool product again.

On May 25, 2008, I bought a Whirpool Model# BFG1J4040T3NOV 40 gallon natural gas hot water tank. The pilot light went out today, Sept. 26, 2011, and it will not re-light. This was bought at Lowes and was rated as a 12-year warranty on the tank and parts. This is premature failure of a product that is listed as 12 years. Due to all the other similar complaints of this Whirlpool hot water tank, I would like my money back ($455.81) plus installation or a new tank installed.

I had the bearing go bad in the tub after a few years of service. It cost hundreds of dollars. As an engineer, I look at this and it is a design made to fail. The seal design is inferior compared to old washers that had a shaft seal made to be on a spinning shaft. This is a rubber lip seal that is going to wear because it is using washer as a very bad lubricant! When the seal goes bad, and it will, the water runs down to the bearings and destroys them, and you have the replace the whole tub as a $300 part!

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

AquaLift cleaning system does not work. My oven was barely dirty and I had to scrub with the special sponge to remove baked on food after I did the cleaning system twice! Rust is also showing up on the drawer which they refuse to repair because it is ONLY COSMETIC! Stove is 16 months old.

Same as others, We purchased a Whirlpool Cabrio Washer and there is a bearing problem (which seems to be the common issue reported). The washer is unusable at less than 5 years of age. The repairman told us its a bearing problem and its common for this to happen to the Cabrio. How can an Whirlpool get away with selling a defective product?

Three years ago I bought a Whirlpool 22 cf bottom freezer (GB2FHDXWB02) & within 2 weeks it developed its first problem. Ive had service men out 3 times (on an extended warranty) for ice buildup and leakage, presumably from the icemaker, and the problem hasnt been solved yet. I tried to open the freezer tonight and the handle pulled off in my hands, nearly sending me head over heels. This thing is a major lemon!!! Dont get me wrong: I love the design! It looks good, keeps everything at the right temps & the bottom freezer is a great idea. Id buy the same design again if I could guarantee no leakage and a handle that wont separate from the door. Now Im having problems getting the repair service to come out here again, despite the warranty. Meanwhile, the fridge is leaking onto the wood laminate floor causing damage. I just replaced an ancient dishwasher & my old Whirlpool glasstop stove after its oven failed. I cant afford a new fridge too.

Whirlpool Cabrio Platinum washing machine: You wont believe this until you call a parts replacement place for tiny part. The plastic (or vinyl) lid hinge bearings are located at hinge corners of lid. Hinge pin passes through them, one on each side. Half the size of a penny, UNCONSCIONABLE greed at the price of $32-$33 dollars EACH when ordered from a parts place. IMHO, design by INTENTIONAL failure to fail after three or four years. As a result, the lid will not stay up on its own. Then you find out the horrible news which is an insult to intelligence. Id have expected to pay maybe two or three dollars each, but NEVER the price they are demanding. Theyve got you and there is NOTHING you can do about it. At that rate, parts would run tens of thousands of dollars to replace the entire machine, part by part. These greedy clowns make car dealers look like reasonable people! The LAST Whirlpool machine of ANY kind we will EVER own!

My washer is nearly 7 yrs. old. It has almost been a full-time spectator sport. Good thing its in the kitchen! Twists sheets so badly - on sheets setting - that it stops and I must undo the balloon its formed and rearrange the wet, heavy 2 sheets and 2 pillow cases. Now, it cant even finish the clean washer cycle without stopping. It seems it doesnt use enough water to do the job of washing items thoroughly. And it balks at heavy loads - which is what we bought this washer to do - blankets, rugs, quilts, etc. Two people, now only one, and two small dogs. I should have at least 10 years of service from that purchase. Repairman says $300+, and he sees it as a very common code. Build them to last or give up. Im disgusted with Whirlpool now.

I have a Whirlpool french door unit with ice & water through the freezer door. I recently noticed rust in the ice. When the extended service plans tech came to see it he told me that the ice bucket would have to be ordered. Almost a month later, I called him and was told that rust isnt covered. I understand that surface or cosmetic rust shouldnt be covered, but rust in a place where it can be ingested is different. Anyway, I called Whirlpool directly and a very nice phone rep agreed with me and asked her supervisor. Needless to say, I just sent Whirlpool a letter stating that I would pursue this through legal channels if I dont get satisfaction.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

ECO friendly top load Whirlpool washing machine - I bought this machine September 2013. Now it has a continuous clicking sound. It appears to be the lid locking mechanism and the washing machine will not turn on. It is under warranty and I am finding it hard to get a repair service in my area that is directed to Whirlpool to come and fix it. The only appliance repair in our area states that they will charge for trip and service if they find that is not a defect within the Whirlpool perimeters. I could be charged up to $200 for trip and service which is half of what I paid for. Whirlpool states this is not the case, and I am now having to wait a week to even set up yet another appointment. I have other machines that lasted 7-10 years until they wore out. I am frustrated and what could be a simple fix has turned into a financial nightmare.

18 months ago, we purchased a Whirlpool Duet Washer and Dryer. Having previously only purchased Whirlpool washers and dryers for over 40 years, we decided to continue because we had enjoyed positive experiences with all of our previous purchases over the years. Now, our washer has quit working properly, the door locks and wont open on the washer and the repairman arrived today with parts to replace based on the code messages popping up on the washer screen. However, now, hes not certain if the motor has burned out or if it is some other problem. We also purchased a French door frig from Whirlpool barely 13 months ago (bottom freezer) and recently had to have that repaired when one of the electronic boards went out and the freezer quit working and icing up.In both of these cases, the appliances started giving us problems just as soon as the warranties were up; what has happened to Whirlpool reliability and dependability of their products? We cant help but feel that our China-based parts are part of the change and will, in the future, not purchase any more Whirlpool products. We are grossly disappointed and feel cheated with these appliances.