Im glad to see that Im not the only one that is dissatisfied with Whirlpools products. Three weeks ago I found my basement to be flooded and you could tell that it was from the hot water heater that was installed in 2005. The plumber changed the release valve. I thought that was it. This past Wednesday I go down the basement and find another flood. The plumber said pilot was not lit. The explanation was wind could have come down the chimney and blew out the pilot. Pilot was relighted and within 12 hours there’s cold water again. I called the plumber again and said that the thermal coupling must have gone bad. I went to Lowe’s to get a replacement and found that Whirlpool is sending a free replacement but I would have to pay shipping. All well and good, but what do I do in the meantime for hot water? If Whirlpool made a mistake, why didnt they send the replacement parts to the businesses that sell their products? I guess that would be the simple solution; instead, they expect me to pay $30.00 for shipping and be without hot water. Well, let me tell you: Im tired of this hot water heater. Whirlpool can go out of business for all I care because they dont stand behind their products. Im going to buy myself a Rheem and Im sure Ill be a lot happier. Need a new hot water heater? Don’t get a Whirlpool!

3/16/2019 washed a load of bed sheets, on the white clothes cycle, put the wash in at 9:21am. Left the house at 12:41pm. Wash still not finished! It was finished by the time I arrived back home, I was gone about 11/2 hrs. I have yet to complete a wash cycle in less than 1hr 15mins. I hate that I have no control over water level, that I have to put detergent in the bottom of the tub, and the damn lid locks! My clothes dont feel clean. Why does big brother get to decide how my wash should be done, when they dont pay my water or electric bills?

We bought our Whirlpool Cabrio 7 years ago and it was great at first. I have not had any trouble with it ripping clothing. The clothes are clean. Its constantly breaking down. First it was the drain pump. Then the main computer board went! I called Whirlpool and of course the lady says its not covered. I had back up though. Google is amazing! I asked why this wasnt a recall as all over the web, people had this same problem. I pushed and pushed and she put me on hold. Came back to say it was in fact covered. What? Really? What changed your mind? She wasnt allowed to tell me. Supposedly had something to do with the date of manufacture. So okay, they send the repair guy out, its fixed. Now tonight, the lid locks and nothing happens! This repair was about 6 months ago. Grrrrr. Its been one thing after another with this hunk of expensive junk. When I buy an appliance I expect it to be problem free for far longer than this. I am not getting a code or anything, just dead air. So frustrating with three kids not being able to do laundry when I need it randomly :( Has anyone else had this problem? The lid locks, then does nothing. I unplugged it, pressed off and restarted it. Changed settings. Nothing is working.

I call in to Customer Service to get someone to fix my washing machine because it wasnt working and when I called, I forgot to have my washing machine serial number at hand. The person on the other side told me that she cant wait for me to get the serial number more than 2 minutes and I ask myself, if they cant wait for me more than 2 minutes to get my serial number, then why should I wait a week to have someone fix my washing machine?

Ive spent more repairing this washer than what I paid for it new!!! Its really ridiculous that Whirlpool isnt more responsible for their equipment that doesnt stand up to their name! Ive replaced more things than I want to type but just to start the computer board, pump, bearings just to name a few. Each time I had my repairman out it was a minimum of $300 to repair. Ive had my repairman out 5 times to repair things. Thinking each time its cheaper to fix it than buy another which I surely didnt think I would be repairing it several time! At this point Im just sick to death that a washer that is for a home of myself and my daughter has broken down so much. I cant imagine what a family would go through. Even after all the repairs it still isnt right but Im done sinking money into this sinking ship of a washer! Its loud constantly stops due to un level so I have to move the clothes around usually having to repeat this several times before I can get the load to finish!!! Then they come out wrinkled more than they went in and I have to iron clothes. A person should NOT need to iron! May as well wash them in the river on a rock. It would be easier!!! SO DISAPPOINTED!!!

We bought a Whirlpool gas range about a year and half ago. The oven started giving lighting problems we had to light with a match every once in a while. Then the broiler igniter started giving same problems so I replaced the igniter, still did not work. Then I tried the control panel, still nothing. The igniters were about 45.00 each. The control panel was 250.00. Then I replaced the spark module and it is now working. Some models the spark module dont control oven and broiler but mine does. That was 200.00. The best thing was the part place I was ordering from would exchange the parts that you try and they also can answer questions either online or by phone, Appliancepartspros.com. My oven model # is wfg371lvs3.

My Cabrio washing machine is a hunk of scrap metal after five years of lite use. Replaced the electronics first, then a year or so later replaced the motor. Now its leaking from the bottom. Repair man said it is not fixable. I did not buy a warranty because it was too expensive compared to the value of the washing machine. My recommendation to anyone buying a Whirlpool appliance is to buy the cheapest thing on the market, so that you can throw it away when it breaks because they are made to break so that they can sell you extended warranties.

Bought the above named model number Whirlpool dishwasher in Nov 2017 and it stopped cleaning 6 months later, dishes were instead of dry and NOW the motor is completely shot! Never again! This is ridiculous that the part cost more than the product! Worse that I need it repaired or a new one in less than 3 years!

Our Whirlpool dishwasher works great, gets dishes clean. It is programmable so we can set it to run whenever we choose. It has 3 spinning water spreaders at different levels in the machine, which gets dishes, glasses, pots, pans, bowls, silverware very clean.

I called customer service line regarding my Cabrio Automatic Washer (Model No: WTW6600SW2; Serial No: CU2171019) purchased on 11/24/07, to report and ask for assistance with a chronic ongoing service problem. Several calls in the past and service visits (at my cost) did not rectify the problem. Although there are many similar complaints on this machine regarding the loud noise and resulting problems during the spin cycle that involve the tub and rods, the representative said So sorry or Too bad we cannot not help you.My machine now does not run and is less than 4 years old --just like every other report. I get an error message F which the representative alluded to something involving the electronics. Machines purchased in 2004 from Whirlpool have across-the-board similar problems that Whirlpool refuses to take ownership for. This machine is their top of the line model. I dont feel the financial burden of repair or purchase of a new machine should be on the shoulders of the consumer. We bought in good faith from Whirlpool and expect Whirlpool to live up to their responsibilities. Thank you for any help you can provide.Rae **

Ive had my Whirlpool water heater for almost 4 years now and for the last year and a half, I had to have the pilot light lit at least 5 times. I finally got so frustrated around the 3 times and called the company. They gave me instructions on how to light it and to ensure no draft was around the tank. A couple of weeks ago, it went out again and I called. This time I was told to replace the thermocouple. I did that and guess what? Still no hot water. Im a single parent with 2 kids and weve been boiling water just to bath.A service tech came out and told me I need to replace the tank altogether. I called Whirlpool service and they told me it was nothing they can do. Like many of you, I got this tank from Lowes and they will not do anything about it either. Its hurtful and stressful that doing a holiday season, I have to decide to either buy a hot water tank or give my kids a good Christmas. I know several friends and family who has had their tanks a lot longer with no problem. My problem is its a crappy Whirlpool brand with poor customer service.

After 48 years of marriage, I had never had a new, matching washer/dryer set. I had had several new washers, but only used dryers. These all were very good units and served me well for years. So I was excited to buy a new, matching set. I have never been soooo dissatisfied with anything in my life. As I have read from other reviews, the washer uses very little water, sometimes hardly enough to get the load of clothes wet, very little soap, and in my opinion, does hardly any agitating. I dont feel my clothes have ever appeared clean. The only ones that look clean were the ones that started out looking clean when I put them in. I know this is all an ecology thing, water saving, government guidelines, etc., but please give me my old washer back. It did enough agitation to get clothes clean. And the dryer usually will not get the jeans dry on the first attempt. I have tried various settings, and they just dont get dry. In short, I HATE THIS WASHER/DRYER SET. I have heard others talk about the same thing. No one likes them, but we are stuck with them. Would like to have the government step in and see how dissatisfied everyone is with them and force Whirlpool to give us our money back, trash these units, and buy something that actually works. PLEASE, IF YOU ARE LOOKING FOR WASHERS AND DRYERS, DONT BUY THESE. I believe they are called Cabrio.

I have a nice basic fridge, 2 side by side doors on top and a freezer on the bottom. Also has ice and water on the door. It does exactly what it should do, keep my food cold! Works great, lots of room and has adjustable shelves. No weird electronics to break. Had it for 3 years and I love it. Also, its American made which is important to me.

I have the same problems as the ones listed in complaint section. I bought 4 Whirlpool products at the same time: refrigerator, stove, and the Whirlpool duet. Washer is a front loader. We have had nothing but trouble. The company we bought the machine from exchanged the washer for the same model because the electrical was bad and the parts to replace were back ordered for more than 3 months. We are now having problems with the exchange washer. This time it is the same as the engineer remarked in his complaint the bearings are bad and it sounds like a jet taking off. It’s that loud.I went down to the place of purchase and I am in the process for the repair. I have a feeling this will not end well. Whirlpool, if you call them, gives you a run around or tells you they dont have you listed in there computer. We dont have the money to replace any of this. This new machine is only 9 months old. Whirlpool is making a killing off of fixed income people and the working class. You tell me who can afford the cost of that kind of repair or the cost of a new machine that only works for a couple of months. Why is 60 Minutes not on them like a bad smell?

The broiler came on its own during the night. We went to bed at midnight. 4:30 in the morning woke up to a smell, the broiler was going wide open. It had melted the handle off the front of the drawer. There are cookie sheets in the broiler. We dont use it, we have never used it, it was so hot Teflon on the cookie sheets burnt off. The side of the stove was so hot I couldnt touch it to get behind to turn off the gas. It almost burnt my house down. The carpet and the wall are black in the back.

Bought a Whirlpool standing freezer EV161NZTQ 10/8/2013. Been fine to a week ago and meat was soft, not frozen and veggies on door soft. Dont hear compressor cycling on and off anymore. Still under warranty so well see what repairman says. Things just dont last anymore. Last Frigidaire freezer lasted 10 years but they werent rated good by consumer reports.

I purchased my refrigerator (Whirlpool side by side refrigerator model ED5FVGXW507) in January 2013. We travel more than 6 months out of the year, so we have not had excess usage from the refrigerator. After only a few months, the plastic drawers started to crack. Now, after less than a year and a half, all my drawers are cracked, as well as all my door bins. I will be married 50 years in December, have owned refrigerators for all those years, and this is the first time that I have ever had a drawer crack, let alone all of them, as well as the door bins.

We bought a nice stainless dishwasher from them and got the three year extended warranty. Parts of the racks have slowly been breaking off, and now its started leaking from the bottom at the end of its cycle. We called Home Depot only to find out we were 3 days over the warranty, and basically out of luck! We will never buy another Whirlpool again, or shop at Home Depot.

I had my Whirlpool Quiet Partner 11 Portable Dishwasher for less than a year when it started leaving dirt, food particles, and white cloudy film on my glasses and dishes in the top basket. It got so bad that we started to wash the dishes twice but it would not clean the dishes. We called a repairman out to see what the problem could be. He checked everything and told us nothing was wrong with the dishwasher and to clean it with CLR. We cleaned it with CLR twice and the dishes looked better with the first wash. The next wash was the same with leaving grit and dried food particles on the glasses. I am now washing my dishes by hand if I want to clean dishes. Can anyone tell me what is wrong with my dishwasher? I am ready to buy a new one but not a Whirlpool.

I just bought this water heater on 2/12/12 and it has already started having problems. I got a self diagnosis of the gas valve needing to be replaced. I think that if this becomes an ongoing problem, whether I have a warranty or not, I’m going to trash it and go with another brand. I shouldn’t have to pay to have the gas valve replaced.

I bought a Whirlpool dishwasher from lowest in May of 2011 and it stopped draining, serial # f11601686. I was told it was under warranty and you sent someone out. But surprise, I got a $129 service bill and it couldnt be fixed, computer board gone and drain motor shot. I was told its cheaper to buy a new one. After 10 months of use, we need a new one. I think you should replace my dishwasher and pay for a service call. Oh, the reason they said it wasnt covered is because they sold me a 2007 model.

I purchased this washer over 8 years ago and we have been using it 3 to 4 times a week/ 52 weeks a year since. It has performed flawlessly up until about a year ago when it kept given me uL error. Everytime I wash the basket always spins wobbly and unbalanced it seems. I checked the Internet and it turns out others have had the same problem. The solution was to replaced the 4 springs supporting basket and that fixed the problem. Been working ever since.

The machine has an infinite water level setting, an agitator which I feel cleans clothes better, separate settings for water temperature for both wash and rinse cycles, and the ability to soak prior to washing by just leaving the lid up. You can add bleach and fabric softener to dispensers that will add to the tub at the time needed. My machine has been a really good one.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

This Whirlpool Cabrio washing machine just does not do the job. It smells inside and does not get clothes clean, just normal everyday laundry. I usually have to put them through twice. It is supposed to be a water save, but I dont think it uses enough. I use minimal he detergent, yet you can see detergent residue on the clothes after they are washed, I think because there is not enough water running through to rinse clothes very well.

Watery body from all the refrigerator side since 9 – 10 months and complained to Whirlpool 2 months back. They changed the thermostat 2 times but no use. Problem same. Please help. I complained during the last warranty days. Please let me know.

We have a Cabrio washer and dryer. The Washer has had problems since year one. We have just gone through service with Sears to fix a rusted out hinge on the lid. The tech broke the lid trying to drill out the rusted screws. He ordered a new lid and six weeks and one day later came to put the lid on. This was terrible. We were rescheduled two times for our appointment. Today the washer will not start on the cycle when you press the start button. We will never buy another Whirlpool product and not Maytag if what I read is true. Probably will be six more weeks to get this resolved.

I bought Whirlpool top-loading high-efficiency low-water washer Sept 2018, model WTW5000DW, Serial # C83444466. Worst washing machine ever! No matter which water level you choose, it will not dispense enough water to cover the top of the clothes load, therefore the clothes are just moved from side to side with only the bottom layer of clothes getting wet; top clothes stay dry. Not enough water to fully agitate to clean the clothes!Whirlpool serviceman came today (Jan 13, 2020) to recalibrate the settings. VERY NICE MAN BUT THERE WAS NOTHING HE COULD DO TO SOLVE THE LOW WATER LEVEL. Recalibrating settings did nothing to solve the problem of not enough water. I am 81 years old and I have to manually add at least 4 buckets of water to an average load of clothes. This is unacceptable. Wont someone please initiate a class action lawsuit against Whirlpool for selling this very obvious poorly designed machine? NEVER EVER BUY A WHIRLPOOL WASHING MACHINE. It is a waste of money.

I have made a conscious choice to remove baked food from my diet back in early 2013. That has not stopped my wife from pursuing her passion for baking from time to time. It goes without saying that baking requires a well functioning baking oven. The one that came with our home was a Whirlpool Wall Oven/Microwave combination. Sometime in early 2014 the Oven broke down. I had no choice but to replace the combination. After doing some online research and a couple of trips to stores like Sears, Home Depot and Lowes, we decided to drop $2700 of our hard earned dollars on a brand new Whirlpool WOC95EC0AS wall oven microwave combo to replace the old one. Lowes sent someone home to take measurement to make sure that we ordered the right size for the slot in our kitchen. 2 weeks after the purchase, around March 27th or 28th, we had the Microwave/oven combo installed in our kitchen by some Lowes provided installation contractor. After installing the appliance, the technician demoed both the microwave and the oven part of the combo. Everything looked good and we were happy to see the shiny new appliance adorning our kitchen. Little did we know then that this would start a seemingly unending horror story. For the first 3-4 weeks we used only the microwave and it worked as expected. Then one weekend, my wife decided to do some baking. The dough was prepared meticulously and then came the first surprise, the oven refused to turn on. Feature not available - the message scrolled across the LED display. And horror of horrors, the microwave started giving the same message immediately after. We looked online for solutions, and we found one that suggested that we try breaking the circuit for 1 minute and turn on again we tried it to no avail. And now we went from having a working microwave/broken oven to no microwave/no oven.We waited till the next day or so before placing a call to the customer service number provided in our warranty receipt. By now the 30 day return guarantee had expired and it was the end of April, 2014. Product was now under manufacturers warranty. Whirlpool/Lowes customer service scheduled a technician to come take a look at the oven.My wife took a day off from work and waited for the technician. The technician from J&H appliance repair of SJ came home, took a look and then tried breaking the circuit and turning it on again after a minute; of course, it did not work. After consulting with someone on the phone, he decided to order some parts the main circuit board. He promised to come back after the part arrived. We did receive a call from J&H to schedule an appointment to install the part and schedule a time we did. J&H decided to no-show us on the appointment and my wife wasted another day of her time-off from work.We called customer-service again and this time they decided to send in a technician from a Sears owned company called A&E Factory Service. A technician came home and he went through the same steps as the earlier technician from J&H. This time, it was my turn to stay home and welcome the visitor. Finally when there was no trick up his sleeves to left to try, he decided he is going to order the main board. A&E technician did something different, he ordered the part to my home. I called him as soon as it arrived. We scheduled a time and he arrived to install the part. I stayed home again. Well, result was no different and the appliance was in no mood to oblige to our coaxing and cajoling. Feature not available, it continued to bleep out. He ordered 2 more boards to my home. I stayed home again to welcome the technician and he arrived again to install the 2 new boards but the result was no different than the last time. Feature not available - the zombie appliance screamed. He told me that there is only one that remains to be done which is to replace the front panel circuitry so he ordered it. By now it was end of June. We hadnt used the oven for 3 full months and the microwave for 2 months.First week of July, a new technician from A&E showed up early in the morning to install the newly ordered front panel. Surprise, Surprise - Feature not available screamed the shiny lemon sitting in my kitchen wall. The technician asked me if I will be home the whole day and I said yes. Another technician, a supposedly senior expert came by that afternoon. He tinkered with it for a couple of hours and like all who came before him, he surrendered. He said there is nothing left to do with the oven and that he is going to recommend that the oven be replaced.He left me a voice mail next morning saying that I need to call Whirlpool myself and apprise them of my experience and ask for a replacement. So I called the customer service after a long 1 hour talk with customer service rep, followed by a conversation with his rude supervisor. I was told that Whirlpool no longer deals with A&E that they broke their relationship with them as of June 31st, 2014. I failed to understand why that was my fault. I was told they need to send technician from another company, can you guess the company whirlpool recommended? It would be funny, if it wasnt incredibly painful to deal with horrible customer support representatives yes, it was the the no-show company J&H. I told him Id have nothing to do with J&H. So they recommended their only other option, a company called AGO.AGO technicians started showing up at my house since early July and I waited with baited breath for them to suggest a way forward to a resolution. Well good thing that I didnt hold my breath for that to happen. AGO technicians have made 8-9 visits to my home during July and August with the last visit being on Aug 20th. They replaced all the boards that A&E guys had already replaced the previous month. On August 21st, I received a call from AGO rep saying that they have given up that the product is irreparable. They gave me a reference number and asked me to call Whirlpool for a final resolution.I called Whirlpool customer service on August 22, 2014 and Spoke to Jennifer and her supervisor for 32 minutes. They wanted to restart the whole process of sending technicians to my home. It would be funny if they hadnt stolen $2700 of my hard earned money + all the lost hours and productivity + vacation time lost + headache they caused + the pain of not having a working Oven/Microwave in our kitchen + dealing with rude customer service reps, I lost it. I threatened to put the whole recorded conversation on YouTube. The rude inconsiderate supervisor hung up on me.I called back after a few minutes and spoke with a tad bit more reasonable rep named Ashley. At least, she had the patience to hear me out without barking at me about what my rights are as a customer. Well she had no better solution than to suggest another technician appointment what was the excuse this time? That the last technician from AGO didnt call Whirlpools tech support line while he was at my house. As if that is my fault. I agreed and we setup an appointment for Wednesday, August 27, 2014 between 8AM and 12PM with the same old company J&H who no showed me once. Goes to show you who Whirlpools associates in business are. They had only two companies providing repair services in San Jose AGO and J&H.I took the morning off from work on Aug 27, 2014 and waited till 12 noon and there was no sign of technician. So I called Whirlpool customer service number one more time. As you would expect by now, a rude customer service person named Eva from Michigan picked up my call. It was reasonably clear to me during that conversation that the J&H technician no-showed because appointment was not communicated to them. She emphatically claimed that my warranty is not a product replacement warranty but a repair warranty and that she needs to send me a technician to take a look at the product. Can anyone believe it? She told me I have only one option either to accept the perpetual technician visits or she will note that I have rejected their offer to service the product. I told her I am not rejecting anything, just exploring all my options. She assured me I had no other options. The arrogance of these people! So here I am, several thousand of my hard earned money stolen by Whirlpool and I still have no working product. Adding insult to injury, 2 weeks ago I received a letter from Whirlpool pitching me to extend my 3 year extended warranty to 5 years. They want to inflict more pain and charge you for the privilege.I have more options than Eva would want me to know. Luckily I have legal coverage under my benefit plans at work. Even more importantly there is social media and internet. I am pursuing those options at the moment. Heres the summary: Lowes takes my $2700 on March 13th. I get the Wall Oven delivered and installed on March 27th. A total of at least 15 repair visits are made to my home between first week of March May and August 21 (I have started losing count). Time since product purchase: > 5 months. # of times the oven has worked : 0. Hours spent talking to rude customer service reps: 4-6 hours. Time spent at home baby sitting repair technicians : > 100 hours. Lowes, Inc washed their hand stating 30 day money back guarantee is over. Its customer service people were not of any help either. UPDATE 9/15/14:Within a few hours of publishing this post (on 9/2/14), I was contacted by both Lowes and Whirlpool via Twitter. Both the companies seemed genuinely interested in resolving this issue. After I DMed my appliance and contact information via twitter, Melissa from Whirlpool called me and left me a voice mail on Wednesday, Sept 3rd, 2014 informing that they have decided to replace the oven. I was told in that voice mail that I should expect a call from Whirlpool on the details of the exchange before end of day on Friday (Sept 5th). I was contacted by Lowes and I informed the Lowes rep that Whirlpool has agreed to replace my oven.I thought I would really be able to make a single update to the post informing the world that Whirlpool really made amends and tried to hard to correct the failures of the past. It is 9/15/14 today and I havent received any updates from Whirlpool about the how/when of the exchange. I made 2 customer service calls to Whirlpool last week. I was unable to speak to Melissa the first time, but did speak with another rep. She told me she will pass the information on to Melissa and ask her to contact me. She connected me to Melissas voice mail and I left her a voice mail. Melissas voice mail greetings suggested that I also contact her via Whirlpools customer service email for faster response. So I did that too.On Thursday 12:37PM pacific, I received a call from Melissa. She had no useful information to share with me. She is waiting for some paper pusher to do his/her job and could not make any promises as to when it will be resolved. My file is stuck in one of Whirlpools many bureaucratic bottlenecks. This is no personal indictment of Melissa it is just evidence that Whirlpools is not serious about customer satisfaction. My experience is not isolated as evidenced not just by this event but also by the number of people ranting on their social media handles. Here was an opportunity to rectify its mistake and win the confidence of a customer back and so far Whirlpool seems to be uninterested in any such thing.IMPORTANT UPDATE (9/16/14): Please share this story via your social media handles. It is important to hold these people accountable for their actions. It is also important that we inform consumer about the perils of doing business with these organizations. Thank you very much. UPDATE (9/17/14): Whirlpools customer supports twitter moniker is @WhirlpoolCare. LOL. They could have demonstrated care by resolving customer issues, instead they removed my permission to post to their Facebook Page. WhirlpoolCare indeed.:) I will be handling this mostly through Twitter follow me at **. I will be using hashtag #whirlpoolsux going forward. I would request that you do the same. Thank you.https://www.facebook.com/WhirlpoolCare.

Absolutely love the oven/range electric smooth top! Cleans up well. Works well. We bought new along with refrigerator and microwave as a set. We had problem with icemaker, told us we needed new door (well within warranty coverage) then wrong door was sent and company told us that they could only send one door and that was it. Incorrect door sent back. Repairman attempted to fix several more times. We finally quit trying. Husband says we can never buy Whirlpool again.

I Wish I had reviewed this refrigerator sooner. I bought a Whirlpool side by side refrigerator with ice and water dispenser in the door in 2016. Problem #1: Water leaks from the water dispenser and dribbles down the front of the door. I am as vigilant as I can be about wiping up the spills, but over time it has left a water stain. Stainless steel is not stainless! Problem #2: The freezer is too narrow. Too many frozen items that come packaged in boxes have to be wedged into it or stood on end. Problem #3: Ice cubes sometimes randomly drop out of the dispenser and melt on my hardwood floor. Problem #4: Even though the water is filtered, mineral deposits have built upon the well that collects the drips and I have yet to find any product that cleans it. It looks horrible and filthy. If Id had any idea how awful this appliance would look after just a couple of years, I would have been in contact with Whirlpool immediately.

One month after the delivery/installation of this new refrigerator, it began making loud noises when cooling the top refrigeration unit. After the 4th service call and replacement parts, the noise ceased for 3 months. The noise has returned and Im now scheduling the 5th service call for the same problem. Thank goodness I purchased the extended protection plan through Lowe’s when I bought my three new Whirlpool kitchen appliances. Whirlpool used to be known for quality and dependable appliances. That no longer is true. SAD.

I purchased a side-by-side Whirlpool fridge and the ice maker stopped working 2 weeks after I purchased it. The retailer said that I would have to go through Whirlpool to resolve the matter. This has gone on for almost six months now. Ive had two service companies do 7 service calls to fix the problem and today, the 8th service call was supposed to happen and the guy never showed up. The company has lied to me telling me that it will just be one more service call each and every time.I want my refrigerator exchanged for a new one. They are refusing to do so until each service call is completed. I think they sold me a lemon based on the fact that nobody seems to be able to fix the issue. I cant seem to get anywhere with Whirlpool at this point and dont feel that I should have to keep a product that never worked from the start. Help! Is there some kind of lemon law on appliances?

The self cleaning work very well. All you need is clean the filter every time you use the dryer. I had the large capacity. I can wash my blankets and heavy clothes like commercial machine and the machine is programmable for your wash load.

DO NOT purchase a WHIRLPOOL hot water heater!! The gas valve temperature sensors on these units are faulty. Our technician has replaced several of these defective sensors. Costs $250.00 to install - water tank is only a year old! WHIRLPOOL REFUSES TO ACKNOWLEDGE THIS PROBLEM!! We bought this particular unit because of the reputable name brand. They dont live up to expectations. Dont waste your money on a Whirlpool - youll be replacing it soon! Very disappointed in this company!

Whirlpool Cabrio Model Wtw8000BW - Purchased machine Jan. 2014. It does not wash my clothes clean. Clothes come out with dirty streaks all over them. The clothes I dry on a line smell dirty, like they werent rinsed properly. I have been cleaning the machine the first of every month per the instructions. I will never buy another HE washer again, this is my second one. Purchased a new one with an agitator.

I have replaced the damper control unit three times the last three years. The part begins to fail after nine months in used. The temperature becomes too cold in the refrigerator and the food started frozen because the damper door wont closed as cold air flows from freezer to the refrigerator. It adds to the displeasure that Whirlpool is not taking care of the shipping cost even the part is under warranty.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

Ill be just as responsible as Whirlpool and Nasons has been... I bought my Whirlpool stove less than 2 yrs ago from a reputable business in a nearby community, CROWN POINT, INDIANA! I have had trouble w/ the burner knobs ever since I bought it...just brushing up against them turns them on. Enough gas escapes into the kitchen... I bought knob covers to prevent that (they did NOT work)! So I called the place I bought the stove from and they sent out a repairman...he said there was no fix for it... but that I owed him $69.99 for the service call. And every time I turn the oven on to heat it to bake something you smell gas also... Im almost afraid to use it... 3 nights ago I woke up to the kitchen filled w/ gas...knob covers on but still one was still on a bit... it was a whopping -25 and we had to open windows to clear out the gas... you shouldnt have to check the knobs once youve turned them off. Nor should they come on when you brush by them...when youre not even cooking... Granted I am short but the serviceman said I should move everything I needed to cook w/ closer to me so I didnt have to brush up against the stove... what????? I have cabinets above and all around the stove. What I cant use those cabinets????? Something is terribly wrong w/ the stove and the service... If youre in the market for a new stove, dont buy a Whirlpool and for certain DONT buy anything from NASONS appliances in Crown Point Indiana... They along with whirlpool dont stand behind their product... They told me they never had that complaint before. WRONG, I read it more than once on this site...liars all of them!

I spent what I consider to be a lot of money on the Whirlpool Cabrio washer and dryer which I purchased in 2007. Within months, I was getting error messages on the washer, specifically an F51. Thankfully, it was covered by warranty. Whirlpool knew then and there that these things were lemons. The repairman told me he couldnt keep up with fixing that issue. I have since had to replace the motherboard on the washer at a cost of $359, and the idler pulley on the dryer at $221; not to mention the metal catch on the dryer broke. I ordered a plastic one on eBay. I will never buy another Whirlpool product as long as I live! They make junk!

I have the top load Whirlpool. Its very roomy for my covers, rugs & towels. It has a setting for me to just clean my washer or if I need to just rinse it. It has a cycle just for that. Or if I need a quick wash or a just cold water wash it has those cycle. When my cycles are done it makes a cute jingle sound to let me know its done.

Got this refrigerator when I old one of 10 years through AHS home warranty. I asked for a similar one to the one we had. Surprisingly we received the Whirlpool which turns out to 5 times better than are old GE. Same height and width but deeper and with more compartments. We are extremely happy with it

I have a rental home and my residence, I have purchased a fridge for BOTH places. Within 1.5 years, both of the fridges shelving cracked. Customer service will not do anything to remedy this. It is a known issue with his model of appliance. There are numerous complaints and they DO NOT stand behind heir product. NEVER BUY WHIRLPOOL.

I purchased a Duet several years ago and did not have a clue as to the problems everyone was having. Over the course of ownership I called the city to determine if we had a sewer leak. I had a plumber inspect our pipes. I felt really stupid that it took me this long to figure out it was the washer. I knew it smelled like mildew and have been using vinegar, afresh, Clorox until I am blue in the face. I didnt figure out that the sewers smell was also the same as the washers until I got on line and read about these machines. Finally, I lifted up the gasket around the door and it was completely black with mold. No amount of afresh was going to fix this problem. Do not purchase these front loaders. Feel like they should have been recalled and I really dont understand why they are still in circulation. I have also been having health/breathing issues and I cant help but think the mold is causing my illness.

I bought the Whirlpool Cabrio top loader set in 2006. Honeymoon was over after the first year and I had to change the dryer element then the washer with the F51 code six months later. Last year, I had to replace the heating element again! For the last six months, I have been dealing with the dreaded UL on the washer. I cant afford to pay a technician $100 to come out and tell me whats wrong let alone what they will charge to repair a problem that, from the looks of this message board, will never be fixed. I have no choice but to get it fixed in order to sell the ** machine. I paid $1400 for this brand new set and have already invested $500 in repairs. How is this possible? I had a 20-year-old machine prior to this and never had an issue. There are lemon laws for cars, why arent there any for appliances over a certain amount? How in this day and age can a company be allowed to sell such garbage? I will never, ever buy another Whirlpool appliance as long as I live. Any other brand can have my money any day.

I have the Whirlpool Gold microwave model GMH3204XVQ-1 manufactured in May of 2010. The plastic around the lower door handle is cracking (currently in 4 directions from the handle) and the plastic on the side of the control panel is cracking in the center area and lower side. Neither of these area experience abnormal stress in day-to-day use. Unfortunately I could not get a good photo of the other crack on the lower corner of the control panel but included the one on the side in the middle. I contacted Whirlpool customer support about 1-2 months ago and to date, have not received any type of response or concern from them about this issue.

Tried to do a small 2x3 bathroom rug and the spin was thrown off kilter. I have been doing laundry a long time and I know how to evenly distribute clothes etc so the washer should be able to handle it for the price I paid. The high end front loading Whirlpool set.

Whirlpool Cabrio - This washer and dryer have been garbage since the beginning. It does not clean soiled clothes and the dryer (gas) has always taken forever to dry a load. I have always had GE prior to this. I will never purchase another Whirlpool product again. We even purchased the extended warranty and the repair guy was out yet again and said it is not repairable. Now we are without a washer for 5+ days and its going to be reviewed. Review? I want my money back. Theres a lemon law for cars, there should be one for these machines.

After having our refrigerator for a few months we noticed rust on every stainless steel panel on the front of the unit (6). After customer service sent a technician to look at the unit nothing more was done. I was just told to try and scrub the rust off.

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

We have had this Cabrio washer/dryer pair for 8 years now. I didnt want to buy a front loader at the time since they were relatively new and was afraid to roll the dice. We saw the ads for this pair, the washer was the largest top loader at the time and didnt have the agitator (which I liked) so we bought them from Best Buy. I purchased the extended service plan (thank God) because we started having issues within the first month. First was the dryer, it was making a funny squeaking noise. We called to have it looked at and the tech said the drum was out of round. He ordered a new one and it showed up almost oblong. Returned it and got a second (same thing). We straightened it out and put it in. Two weeks later the control panel went out. Repaired it. Then the washer started. In the first 3 years of owning these we had called to repair the washer 4 times and the dryer 4 times. We could have got them replaced after the 5th call. Of course we had replaced all the faulty stuff and the pair settled down for 2 years.Now I have had to repair the washers control panel myself, the dryer sounds like it is coming apart and sometimes runs for hours, and now the washer cant wash in any cycle but delicate because the drum bangs around and cant self balance any more. What junk!!! I know people that have purchased low end machines and have had no issues for decades, maybe a random belt or something simple. I wouldnt buy another Whirlpool set if they were the last manufacturer on the planet. They should be ashamed that they didnt recall these things for all the problems they had.

3 months after I got the fridge, the ice maker went out. 3 months later it started to work again. Replace the water filters 2 times per yr. It is noisy when it makes ice.

If you have the double oven below with bad board, start shopping for a new oven, but the part is no longer made. How can you end of the life a product after only 6 years? This is about the RBD305PDS12 double oven! I have wasted 3.5 days with Whirlpool/Maytag. Its very Frustrating how each department passes you along and makes promises about what the other department can do, resulting in zero satisfaction. None of them are well informed to say the least.I have a 6-year-old double oven that has a bad board and after 3 days, I find out it is no longer made. I paid $1500.00 six plus years ago and now I get to spend $2000 plus to get a new one. Again, how can you end of life a product after only 6 years?

I bought a whirlpool washer from Whirlpool on February 27, 2011. Since then, they have come out and repaired the washer for 5 times. They have even taken the whole motor out, and replaced it. The last time they came, they said I would have to pay for the next time. Now, it has broken again, and I have to pay for a washer repair that is less than a year old. We bought the Whirlpool washer at Sears, and neither Sears, nor Whirlpool will stick by their product. We cannot afford another new washer, and to pay for repairs is a stretch too. Is there anything you can do?

After reading all of these reviews, Im not surprised at the negative comments. My husband and I owned a Whirlpool washer and dryer for 25 years prior to them both dying the same summer four years ago. I absolutely would not purchase anything but another set of Whirlpool washer and dryer because of the longevity of our previous set.We bought the Cabrio set 4 years ago this summer. After two years, we discovered it had a slow leak at the back hot water valve and underneath it somewhere when it spun and it had slowly leaked under the wall into our living room which eventually caused our hardwood floors to buckle. We had to replace the flooring in that section at a cost I will not even say and had a repairman come out and fix the lid lock, leak where for some reason there wasnt a washer in the valve area, underneath and the problem with the spin cycle. This was at a cost of around $200.00. Of course our one year warranty had run out. The next year it did the SAME THING AGAIN!!! Although we caught it quicker, we STILL had to replace a small section of hardwood flooring and have the machine repaired yet again at the tune of approximately $200.00. Now, as I type, our machine has yet again flooded our laundry room one year later and I will have to call a repairman in the morning yet again! Its becoming an annual and costly thing!!!I came across this site while looking to see if by chance this machine had been recalled and we would be able to get another one at no cost since we have already paid a fortune for the errors it has caused. I will be reporting to the Better Business Bureau and writing YET ANOTHER letter to the Whirlpool company with the hopes that they will recall this machine!! If enough people protest and report this shoddy workmanship, maybe they will!!!

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

Bought a Whirlpool French Door, Bottom freezer mount appliance from Lowes in Jan 2014. Model WRF990SLAM00. Jan 2015 the freezer part stopped working. Whirlpool approved repairman came and knew exactly the problem because he was aware of this being a consistent issue with Whirlpools. He contacted Whirlpool and they quickly agreed to send repair kit for FREE. Took 2 wks for parts to arrive, and neglected to send along required tool/gauges for repair to occur. I called Whirlpool C.S. and they claimed they knew nothing and said our fridge was on no problem list. I had repairman call Whirlpool and they claimed appropriate tool/gauges are no longer available! This fridge is only 1 year old!!! Now we are completely ignored. Whirlpool will not even talk to us about help of any kind. HORRIBLE customer service!!! Crappy appliance! After thinking our Whirlpool appliances were a good investment, I will NEVER EVER BUY WHIRLPOOL AGAIN!!!

I am sorry to have updated that review 2 years later. Whirlpool has actually contacted me after posting on their Facebook support group. I am not sure how it happened but I was contacted by their executive team who is WAY more professional and efficient than their support team. In a matter of days my washer was replaced and installed by a new one - the closet available to the model I had - I did not pay a penny and no questions asked even though the washer was out of warranty. So my answer to you is when you are stuck do your best to talk to the executive team!

I purchased the Whirlpool Gold series cook top range-stainless steel. It is of good quality and looks very nice. It is also easy to clean and for the price it has a self cleaning oven. I didnt think that I would like this range but over a period of time I truly love cooking on it.

Approximately 2 years after purchasing a Whirlpool Gold side-by-side/counter depth refrigerator, I noticed cracks on the interior walls. This was in 2011. First, I contacted the service contract people. They told me this was not covered under the policy. Next, I wrote & called the company. They told me they could send someone out to EPOXY the walls. I told them this was not at all acceptable to me and that I believe this is a defective product. I have never heard of this happening to a refrigerator. I am also quite concerned that there are toxins emitted through these cracks. After a time with no response, I wrote them again.This time, they referred me to Ms. Alicia ** at the Exec. Offices. She wrote asking me to call her. After making several calls & leaving messages to no avail, I wrote her asking that she kindly write back to inform me what the company was going to do about this defective product. I cant help thinking they did not want to commit to anything in a letter because I never heard from her or anyone else at Whirlpool. Small Claims Court cannot help as the company does not have an office in New York. I am very worried about the possible health hazard this possesses. I am very careful to completely cover all food inside the refrigerator. At this point, the cracks have increased in size and new ones have appeared. I am very upset over the lack of concern and lack of response from Whirlpool.Ive owned many Whirlpool appliances through the years and trusted the brand. This is not a cheap appliance. Consumers dont expect to spend a few thousand dollars on a product just to dump it in a year or two. Given the size of the Whirlpool Corp., anyone would think they would simply replace their defective product to keep their reputation if not for the health concern of their customers, which should be a priority. Over the past few years, I have had increased respiratory problems and so have other family members. I believe its due to the emissions from the cracks. I will have to dump this defective refrigerator before it gives me cancer! Thanks Whirlpool, great doing business with you.

Whirlpool Cabrio WTW8500DW0. Like: Top loading, Handsome appearance, clear glass lid, easy access soap dispenser plus separate Oxi dispenser. Dislike: Does not have a soak cycle. We didnt realize until after we replaced our old Sears Calypso what a really poor job it was doing. It damaged the clothes and never really got them clean. Also, the small capacity made it nearly impossible to wash large items such as bedspreads or comforters. The Whirlpool Cabrio WTW8500 has be a delight.

I have had my washing Machines since 2011 and have had continuous problems with the washing machine during spin cycle sounding like a freight train going through my house. Whirlpool has had people to my house 5 times to fix. When warranty was up in 2012, I was told they would continue to cover this particular issue. They came out again in April 2013 and now I am being told, Too bad; if you want fixed then you will need to pay for it.

New Whirlpool Refrigerator makes roaring noise like a broken engine. Whirlpools 2 technicians listened and confirmed but said that as the refrigerator works they can do NOTHING about it. Whirlpool management would not respond to repeated requests. Dont even get near ANY Whirlpool products!!!

I have received two bad Whirlpool Water Heaters from Lowes. In the course of a few years, I have received two defective heaters (new). One was even a replacement for one several years old that had failed. Lowes insists that you call an 800 number where someone that speaks poor English tells you that you have done something wrong. I am returning the water heater to Lowes, and purchase a water heater elsewhere. This is a perfect example of how sometimes something that is initially cheaper is not the better value.

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

I absolutely hate this washing machine. When I bought it a couple of years ago I thought it would be great for large items... NOT! It leaves white residue on dark colors but the MOST important issue is going off balance. The lid stays locked and you have to start the cycle from the beginning... What a waste!!! Never again will I get a Whirlpool.

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

I will never touch the premier Whirlpool Brand Again. This is the two door fridge + drawer freezer, model GI7FVCXWY0After about a year, and I think it lasted this long because the ice maker was off during winter (because unless you use it constantly you have a solid block of ice), after a year it stopped making ice and poured water out from the top of the fridge. Expensive extended warranty came and replaced the Ice Maker, which (about a year later) has just started leaking all over the floor (again).This I suspect was a protest against using all of the ice one day. It froze up, which causes the leak, froze solid items that were in the fridge compartment (and spoiled some items).The other design fault is while the right hand door will stay open, the left will not, it closes. But it does not close properly - just enough to make you think it is closed.Dangle beers in a nearby stream, keep your food in the cellar, dig a deep hole in the backyard, learn to eat all your food the day you buy it, but do not buy this fridge!

My side-by-side lasted 2 years 3 months. It stopped cooling. Lost all my food. Inconvenienced by waiting for repair service. Had to take a vacation day from work. This refrigerator replaced a 13 yr old GE and the one in my garage is 25+ years old and still going strong. No help from Whirlpool or Lowes. I will never own a Whirlpool anything ever again.

I will never buy a Whirlpool product of any kind. I bought a gas stove and its a piece of **. Won’t even light. Only way to start it is start boil then switch over to bake then it wont light. So please I ask that you make a product thats worth buying.

So disappointed with my Whirlpool purchase. I will never purchase another Whirlpool product in my life. This is my second whirlpool oven to die in a short period of time. My most recent oven only made it two years. For there to be an internal wiring issue that is now costing me $500 to repair on top of waiting 30 days for them to be able to fix the oven. This is a terrible product. Unfortunately, I didnt realize the poor quality and poor reviews prior to purchasing from this company. PLEASE be advised.

I purchased an Electric Whirlpool Aqualift convection range in November of 2012. This product is garbage! The oven doesnt work well (temperature is always off), the Agualift cleaning method doesnt work well. You have to self-clean to clean it. The most troubling problem is that just after a year of owning it, the finish on the control panel started to crackle. I called Whirlpool, and all they can do is send me a replacement part for which I have to pay for and have installed. My last GE range lasted over 15 years. This range is garbage from day 1. Hate to see what it will look like in another year or if it will be working at all. BEWARE - DO NOT BUY WHIRLPOOL PRODUCTS!

Two years ago, we purchased a Whirlpool Cabrio Washing Machine from Sears. All of a sudden, it was making sounds in the spin cycle that sounded like a jet airplane taking off. It was terribly loud. We called repair technician, which cost $90, only to find out that the bearing is gone and its going to cost over $500 to fix it. This is absolutely ridiculous! We expected it to last several years, only to find out that we would have to spend almost as much as the washer originally cost in order to fix it. We paid $700 for this machine, two years ago, and I can say that Ive never been more disappointed with a product in my life. My previous washer lasted thirteen years, not to mention my dryer and stove fifteen years, with minimal repairs. I will never buy another Whirlpool appliance again. I have read some other complaints on this consumer affairs website, as well as other sites, regarding this same washer with the same problem on the bearing and cost to repair. If anything, I think Whirlpool should make good on this product and offer something regarding a recall or payment for repair in some form. As far as Im concerned, I will alert everyone I know about Whirlpool appliances and advise them not to purchase it. Now, I either have to pay over $500 to repair my washer or go buy another one. I do not even want this Whirlpool appliance in my house when I can get a washer for cheaper than the cost to repair it.

I bought a 38 gal. low boy electric Whirlpool water heater from Lowe’s. It was replaced because of a leak around the upper heating element after only one year. Now, the replacement heater is leaking in the same place, and it has been leaking so long that the electric terminals are rusted, water is standing in the cover plate, and the lining is soaked. I cannot see behind the plate and dont know it until the water finally made its way into the drip pan beneath the heater. When we saw the standing water, we turned off the electricity and shut off the water to it to stop a fire hazard. The warranty is up on my water heater, but my concern is that this could cause someones home to burn.

I bought a washer from Lowe’s Home Improvement in September 2017, called a couple weeks after the purchase. They sent someone to repair machine. It is still not working. Called Lowe’s back. Was given an 800 number. Talked with someone at this number got nowhere. Was given another 800 number. I am waiting to find out what is going to be done. This is terrible customer service.

This fridge is very spacious in the fridge area. The freezer area is larger than a model with freeZer on top or a side by side model. The black stainless steel is very attractive and doesn’t show fingerprints. The controls for the fruit and veggie drawers are cheap. The drawer for meats and cheese is huge. Overall I like this fridge.

I purchased Whirlpool dishwasher in March of 2011. In July of 2011, the stainless steel front started getting rust spots. Called Whirlpool and they sent a local repairman out. After 3 weeks, I called Whirlpool again and was told that the rust is cosmetic. I insisted that I have other appliances with stainless steel and they do not rust. Either they used a inferior grade of steel, or its not steel at all. They repeated it was cosmetic and they are unwilling to do anything about it.

Having a Whirlpool gas water heater for less than 2 years and having a 6 year warranty one would think you are safe to believe this large company will treat you as well as you treated them when buying their product. Think again. No one is allowed or has the authority to issue credit for failed parts, you cant return the product to place of purchase, you are hung out to dry. Whirlpool, I will never buy nor recommend any product you create or sell. I will make it a point to anyone having a conversation about your products just how youre untrained, read by the manual uninformed technicians really are. I will explain just how over inflated your prices are for such cheap engineered to fail products are. Have a nice day.

My water heater burner went out after just over 3 years caused the pilot to go out. I was worried that although all parts were covered for 12 years and labor for only 3 and the labor would be very expensive. When I called and told them about the problem they said the part was covered and would ship it next day air but 10 minutes later another rep called and said they would cover the labor as well and to check a nearby service company as they might have the part in stock. Long story short without having to scream and yell my problem was corrected within 8 hours and all I have to do is drop off the new burner at the service company when it arrives. I have been lucky and haven't had many warranty problems in my life but none that I have had have been resolved so painlessly. I will never buy anything but Whirlpool from this day forward. Thank you Whirlpool.

We purchased a top loading Whirlpool Cabrio washing machine, Model #WTW8040DWO from Lowe’s on October 15, 2015. Since that time, we have had a service call on three separate occasions. The last service call, the service technician got Whirlpool on the phone with their technician. The washing machine would get stuck at 40 minutes and would continue to fill with water, drain and fill with water and would never progress.After the service technician talked with Whirlpool technician, it was explained the machines electronics were so sensitive that the washing machine had to be on an independent CIRCUIT (meaning absolutely nothing else can be plugged into the circuit). We contacted Whirlpool indicating that was not acceptable. Very few, if any houses, have a washing machine on an independent CIRCUIT. Whirlpools response - I have an independent circuit for every appliance in the house. Obviously, she does not know what a circuit is. Totally disgusted. Will NEVER buy another whirlpool product again. Horrible product and horrible customer service.

We purchased a Whirlpool Cabrio washer 6 years ago. This washer has been such a terrible appliance, I would not recommend that anyone buy one. The top of the washer has broken 2 times. Whirlpool will do nothing about it. It is a manufacturers defect where the glass pops out of the top and then breaks the frame it is in. We had it replaced last year and the new one is now broken - same problem. It also does not get clothes clean and the clothes get ruined because they become all entangled in one another. We will never purchase a Whirlpool appliance again. I did have a 5 year service contract on these appliances but once out of warranty - you are on your own.

I purchased a new Whirlpool washer and dryer (model number WED9250WR0 #WFW9250WR00). The washer broke after about 2 months. They took my washer and gave me some off brand one, because I purchased a 5 year extended warranty. They kept my washer for over 3 months, saying that the manufacturer takes that long to get the parts in. Its ridiculous! The tub, seal, and some other parts had to be replaced. It was shredding my clothing and my bedding. The first time they fixed it, a couple days later, it started making a horrible noise. The repairman came out, and a part had fallen off inside, so he put it back on. It kept happening, so I called them back, and he taped the part on!About 2 months later, the seal started shredding, and so did my clothing. I called again, and they had to replace the seal again. It still sounds off balance, and they said that was normal, because of the give in the floor. The day they fixed the seal, I washed a childs sleeping bag, and it shredded it too! I called again, and they refused to replace it, and they want to come and look at it again. My dryer lint trap seal also keeps coming apart, and I have gone through 3 of those in less than 8 months. They said they are just made poorly, so it will keep happening. I just want my money back, and buy a different washer and dryer somewhere else. I had an old pair that I bought, used, and they lasted me 5 years with less problems than these that I paid two grand for.

We have a Whirlpool washer wtw5640xw2, we have been experiencing burning wire smells for some time. We had bought the extended warranty. Lowes sent out a repair company. They replaced the main board and the problem has continued. This has been as intermittent problem with the burning smell. We experienced it this week really bad! I thought the machine was on fire. We called the repair company and they said they had fixed the problem. My husband called the Whirpool number and they said they would NOT do anything to help us. We are trying to get help from Lowes where we bought the washer. I am terribly afraid to use the machine. This model needs to be discontinued.. We bought this machine 5-07-12. If we dont get some help, we are going to our lawyer.

Bought a Whirlpool Cabrio HE washer over a year ago. Recently, the spin and drain cycle stopped working. Went to find a repair person only to learn that many dont work on this model because of all of its problems. Did find a company who replaced a part ($100). Now sounds like a thrashing machine when it spins. However, now the machine wont even go through a regular cycle. Dont buy this brand!

I purchased a Whirlpool Duet front-loading washing machine on September 27, 2010. By October of 2011, it was making a loud grinding noise during any spin cycle. I called for service and was told I needed new bearings which entailed rebuilding the machine. I had purchased a 5-year extended warranty. I was originally told by the warranty company they would replace the machine.After waiting two months, and after several contacts made by me to the retailers customer service, I was told the machine would not be replaced, but repaired. After the repair, on January 6, 2012, the machine now rattles and shakes so much during the final spin cycles. It is literally impossible to have a conversation with someone standing next to you in the same vicinity as the washer, it is that loud. I am sorely disappointed with the Whirlpool line of products and with the retailer who has been dragging their feet on customer satisfaction.

Today I had the unfortunate experience to have to deal with Whirlpool customer service and claims. I WILL NEVER BUY ANOTHER WHIRLPOOL PRODUCT again! My refrigerator, that was purchased in 2013, has a door misalignment problem. It is a known problem with Whirlpool (service pointer W107317828). My refrigerator serial number and model number are affected. Because I am outside the one year warranty, Whirlpool refuses to provide service that is required to fix this known issue with my model/serial number. After having to talk to four supervisors the only resolution that was given was that they would cover the cost of the 7/16 hex nut ($4.33). Dont get me wrong I do appreciate the offer.The two supervisors that were below her assured me that no one can do anything to assist me further. The attitude of the second and third supervisor was pathetic. After over a hour on the phone I was so disappointed that I could not take it further. The cost that we are talking about that I am asking them to pay is $154.28. I am very disappointed. They say they stand by their product. To me standing by your product means that you will fix or replace any known issue. $154.28. I hope it is worth it to you Whirlpool. You lost a long time customer.

I bought my 50 gallon gas water heater in December 2015. When kicks on it rumbling. I called warranty and they said We will send tech out but I will have pay the labor. Why do I want pay for a tech if the quality issue is the water heater. Need pay $180 for person come out say its defective. No sense to me. Then when they tell me need new water heater pay them for install. You can check my accounts I used to shop Lowes and will no longer do it because of this service.

Purchased 03/28/13. Refrigerator 62 degrees on July 4, 2013. Called for service July 5 - came out July 9 and told unrepairable - wiring harness set against tubing rusted and broke wires. Since July 9, I have been trying to get my replacement from Whirlpool and always told they will call me 24-48 hours - never calls. Asked for supervisor on July 22, then asked for her name and direct number. Supervisor said someone would call me about delivery. Supervisor told me if a local store would have had in stock, they would have sent it out from there (called local store and was told 6 were in stock and could be delivered tomorrow). Tried to call supervisor back to inform her, but number would not go through (apparently bogus number). As of July 22, 2013, still no refrigerator. Very poor customer service/service repair. July 24 - asked if I needed to get an attorney and/or contact local new consumer advocate - Whirlpool said they would issue a refund check for the refrigerator, and that I should receive it in 14-21 business days - said they could not refund on credit card I used to make original purchase. Hopefully, the check will arrive.

I purchased an over-the-oven microwave in November 2020 (Model # WMH31017HZ). It worked until March 2021 then began tripping breaker. The Safety department at Whirlpool stated that I have to get a dedicated circuit. After spending an enormous sum to get that dedicated circuit the microwave worked until April when just opening the door caused a spark that the electrician and I observed. By now I am sure that I purchased a defective unit but Whirlpool was not believing it. (As as aside, expect to stay on hold for at least 10-30 minutes when you call Whirlpool).May 7th the serviceman from Guincho ordered parts that was needed to repair the oven. As of May 30th the part still had not arrived. Finally, after multiple calls and excessive hold time, Whirlpool agreed to refund my purchase price and as of this writing on July 26, 2021 I have not received it. In the meantime I purchased another brand microwave and have to look at their defective one until they decide to pick it up. They have lost a customer.

IPod the Gold Series from Whirlpool appliances including the French door with the freezer on the bottom the induction still two ovens and glass top the microwave in the dishwasher does it cost me about $8,900 dubstep problem with it is after two-and-a-half years of using it the freezer stopped working and coming to find out that not only mine but three other ones in my account have the same problem. The sealed system for the freezer had a leak in it. I lost the freezer traffic to Whirlpool. First time around they said, No problem well take care of the part. To take care of Labor. I waited a month. Nothing happened. I called them back. They said I needed to do something else so I waited for it to happen. Nothing happened. Now I call back 8 weeks later without a refrigerator my house come to find out they told me theyre not doing nothing.Well four weeks later now Im sitting with the stove which cost me quite a bit of money like $2,000 for the induction stove. Now its burned out the computer components. Control panels are both out. It will cost $800 to repair it. Now well pull. Said they will also pay for parts for that but not for the labor so now Im stuck without a refrigerator and I dont have a stove in my house and theyre saying its okay that these very expensive piece of equipment that I bought and its okay for them to only last 2 years. Never had a Whirlpool last me less than 10. I think theres something wrong with this picture.

Model CAE2745FQ0, Serial #C72680766 - Purchased this coin op clothes washer 2/2/2018 at Brandsmart, Deerfield Beach FL. Would not empty or spin correctly; 1st service call 2/28/2018. (Less than 30 days from purchase date). 3/21/2018 called Whirlpool again as same problem continues (as listed above). Washer is not being overloaded. Whirlpool repair visit scheduled again for 3/23/2018. This is the 2nd repair time since we purchased the washer on 2/28/2018. Purchased the same model 2 years ago, and experienced repeated problems to the point where we got rid of that machine and purchased the most current model referenced here. We are looking for a full refund of the purchase price as it appears that this recently purchased machine is on its way to be a repeat performance of the 1st machine that we got rid of (that was purchased 2 years ago). Again, we want the full purchase price refunded, which is $900.88. This machine is not even 2 months old. Thank you.

I purchased a Whirlpool hot water gas heater with a six-year warranty. It only lasted three years. When I called for an RA#, I was told, Well, well send you a part after you get a plumber and pay for it. Meanwhile, there is water all over the cellar floor. I called again and was told the same thing. Two weeks of no hot water and no help from Whirlpool. I will never order anything Whirlpool ever again. They stink.

Whirlpool Water Heater Purchased at Lowes - Like all the others I see on here. I Purchased a Whirlpool water heater at Lowes Model# BFG1H4040T3NOV. Pilot will not stay lit; customer service tells me to replace the thermocouple which did not solve my problem. This is the second time in 2 years same problem. First time it was fixed under warranty but now since it was replaced once it is not eligible for replacement so I now must decide if I want to pay someone to figure out the problem and I must pay to repair it or what I am starting to think is that I will likely junk it and buy a quality unit and be done with the games and run around and just have hot water, which is all I really want. I will never buy another Whirlpool product in my life and will encourage everyone I know to do the same.

Updated on 07/09/2020: This fridge freezes produce. A part was replace to solve this problem but it has never worked properly. After several attempts to correct temperature fluctuation, Whirlpool decided it was working within their specs and advised us to set the temp higher to solve the problem. So we are doing that but now if the temp is too high the ice is watery and falls out of the ice compartment when we have finished using the ice dispenser. So we lower the temp and it again freezes the produce. Do NOT buy a Whirlpool!!! If you have any questions look at whirlfreezefood story...Original Review: Purchased September 2019. Worked for a couple weeks and then Freezes the produce. I have put it in the center drawer and in the main fridge still freezes. Go to ** for full story and recording of a message Whirlpool left me.

I bought the HE Whirlpool Cabrio 2 years ago. It has all the bells and whistles, fancy cycles, etc. but doesnt clean ANYTHING. I have to wash three times to get things clean... So much for energy efficiency. It also gets out of balance with larger loads. What a waste of money and time.

We purchased the 36 inch Wide 4 Door Refrigerator with Exterior Drawer about three years ago and it broke down twice in that time frame. Then yesterday the freezer part and ice maker have stopped working AGAIN!! We probably have spent $2000 on repairs. Complete disaster of a fridge!! Do not purchase one!!

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

I purchased a Whirlpool fridge brand new. Not even a freaking yr old it went out!!!! Repairman came out and said it had leaked crap all over really. He said it would be too much to repair. Better off on purchasing a new one.

I just love the durability of my machine and the features that it offers. It does a great job washing my clothes and I feel like its a solid appliance that lasts for many years and its good quality for the price.

Whirlpool Upright Freezer Model EV205NXTN01 – The freezer door interior plastic panel bows away from freezer cabinet causing door gasket not to seal. The new gasket doesnt help since the groove of the gasket mounts in bows outward with the interior plastic panel in the door. The freezer is 20 months old now and had the door replaced for the same reason at 10 months old. Now, Whirlpool says sorry it’s out of warranty. Guess they want me to buy a new door every year. I wont be buying Whirlpool products anymore as I dont need another boat anchor.