Sent an e-mail to Whirlpool. They responded with apology. Sent a second e-mail telling them they should be paying the $300 for circuit board in a two-year-old range. No response. Also, sent e-mail to Geniers. No response. The impression I get is that neither are the least bit interested in the problem. Once they sold the $1260 range, they were done. We will never buy another Whirlpool from any store and we wont buy anything from Geniers in the future.

lD and UL codes are displaying. The UL code displays when the load is even and also displays UL load when I take all clothes out of washer. How could the load be uneven if there are no clothes in? I have had four different issues with this washer. I have started use on this washer in Aug. 2008 and there have been already three major repairs. I am a very dissatisfied customer. I dont know if I should spend more money on washer repairs or just buy a new washer. Please help.

I hate this washing machine (Whirlpool Cabriolet) with every ounce of my being. That may sound harsh when talking about a washing machine. But, I assure you it is warranted. I have owned many washers in my day. This machine came to me after a family member passed away. The machine was almost new and had not been used very much at all. I found out very quickly that in order to simply wash a load of laundry could take as much as four hours. Every time you go to do laundry you get continuous codes and alarms. So it is a series of trips up and down the stairs to reset the machine, try to equalize the balance, and in many cases I have to unplug the machine and reset it all together. I have researched it extensively. And I have followed the instructions in the manual and from online instructional videos trying to resolve the multiple issues. I cannot wait to get an average everyday washing machine that is not too smart for its own good. I hate, hate, hate this machine!!!

After much frustration and disappointment, as well as 2 huge repair bills with my front loading washing machine I sent it off to the scrap yard, still looking brand new, and went back to a top loading machine. I purchased a Whirlpool top loading, high efficiency, low water machine. I have had it for almost 2 years now and am extremely happy with it. I would highly recommend it. Fairly quiet and easy to use and takes very little detergent. It does not have an agitator so it is gentle on clothes. I know some users have complained about tangled clothes but, in my opinion, if it is loaded correctly this should not be a problem.

Whirlpool Gold Refrigerator, #GI6FDRXXY07 ICE MAKER PROBLEM - Ever since we bought this ref in 2012, we have been facing problems one after the other. First the refrigerator was shutting off on itself thawing the food the ref & freezer. (When we were on vacation, in summer of 2012 , it was a disaster when we returned home.) This a continuous on going problem... not fixed. Second 2012 Spring the Icemaker shuts off spilling water at the dispenser, when called customer service they sent a technician who replaced the ice maker. But again the icemaker is spilling water or leaking now. Third 2013 Winter, the bottom freezer was leaking and ice buildup at bottom. We have been having problems ever since we got this. WHIRLPOOL YOU HAVE DISAPPOINTED US, its been an exasperating experience. Please Help, its not our fault for your poor design & faulty product.

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

I purchased the top-of-the-line Whirlpool Cabrio washer and dryer. My washer is 6 years old and will not complete a wash cycle. According to the repairman, the drive shaft is stuck and it will cost $500.00 to repair it. When speaking with Whirlpool, their suggestion was to buy a new one and get an extended warranty. This company is a total disappointment.

In less than a year my gas range required a new knob because it froze in place. They covered that but not the 4 new knobs since. I must clarify, its not actually the knobs but the thing underneath that my husband has had to replace ever since to our expense and time. Also in less than a year the paint under the knobs totally fell off. We contacted them about that and the reply was paint wasnt covered under warranty. Obviously they used heat resistant paint on the range top because that is perfect condition even with the constant cleaning, but the angled front where the knobs are I had to sand and repaint, not a good look for the stove. They really couldnt have just used the heat resistant paint for 2 1/2 farther? Just horrible quality and worse service. I used to be devoted to Whirlpool but since buying my new refrigerator - Samsung 100 percent from now on!

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

Every time I wash clothes, I get a terrible odor that permeates my home. Ive put in afresh to rid the problem. Ive had a technician take it apart to clean the filter & hose. Nothing helps!! My clothes come out smelling like the sewer. I called the company, and the person I talked to had no real solutions either. Im MAD! What are you planning to do about my stinking problem? Im washing clothes right now & have to have all doors open & fans on high!!!

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

The unit had all the features that we wanted and considered essential. The unit only weak issues is temperature(s) in both sections. The freezer is very poor with ice build up on the food stored for more than a couple of days. The manufacturer has been very weak in support as to how to solve this problem.

We bought a Whirlpool French Door refrigerator in July of 2018 and it has gone out twice (quit cooling and has completely frozen over). The first time it went out at 6 months and the second was two days after the factory warranty expired (the warranty for the Whirlpool repair company lasted only 90 days for parts and labor which is useless). I’ve called the company to come take a look and it will cost over $100 just to have someone come out since we are outside the factory warranty window by four whole days. I was basically told there is nothing they will do even though the same problem keeps happening. This refrigerator was brand new and didn’t even make it six months.Now we will need to either pay hundreds of dollars for repairs (knowing that the issue will likely happen again) or buy a new refrigerator. Even though we have barely had this appliance a year. I will never, ever buy Whirlpool products ever again. I also posted my negative rev on their official website and it never got published. They only show their 4-5 star reviews (all of which say the customer has been incentivized in some way). This is a misleading and sneaky process.

I purchased my water heater at Lowes and had it installed professionally. I suspected something was not quite right on numerous occasions because the hot water recovery time seemed excessive. I finally called Whirlpool and they gave me the names and numbers of two companies that were on their list. The first asked for the model number and normal information and never called back. The second showed up spent five minutes charged me 78 dollars and said they could not get the part (gas valve) I needed. And if I could get it from Whirlpool they would charge me 250 to put it on. They also said Whirlpool made horrible water heaters and I should save myself the trouble and just replace it. I have since heard from additional plumbers and the gas company to stay away from Whirlpool. I did have the water heater replaced. When they did it and they drained the old water heater it had so much sludge in it draining it was very difficult. The sludge is mystery since I have a softener in my home and it should have prevented that. The individual from that gas company said that was just one of the many issue others had experienced with these heaters.

Whirlpool electric range with ceramic cooktop - I have a large black mark on one of the cooktop burners that appears to be beneath the surface of the cooktop. It’s almost within the finish of the burner and unable to be cleaned with cooktop cleaner. I have purchased an extended warranty and arranged for a service call. The repairman came out as scheduled, but informed me after making a phone call to who knows, because he did not tell us that the problem was cosmetic and could not be repaired under warranty. However, if we wanted a replacement cooktop, it would cost almost as much as a new stove. He also said that he had seen many of these ceramic burners with that problem and it was not unusual. All I really want is what is fair, a defect that is not my fault that needs to be replaced. The stove (Whirlpool electric range with ceramic cooktop) was purchased in 2004 and is kept very, very clean.

I contacted Whirlpool on 3 separate occasions. Each time they told me to have the plumber call them so that they could determine what the problem was. Each time he was able to get the water heater going again, but it would only operate for about 3 months and then it would go out again. To date, I have incurred $245.00 in plumbers service fees. My last call to Whirlpool was on 5/14/2013. This water heater was purchased on 1/25/2010 at Lowes in Evans, GA. It went out over the weekend, but the plumber was able to relight it. When I called Whirlpool on the 14th of May, I was told since it was working now, there was nothing they could do. I am tired of dealing with this issue. They wont stand behind their product.

We purchased a Whirlpool Accubake Drop-in Stove (Model # RS675PXG015) on 10/21/2006 from Lowes Companies, which cost $1,100.00. In 11/2012, we had an error message E1-F2, and we tried everything to get it to clear - all suggestions given by electrical repairman who does repair for Lowes Cos. The stove is porcelain, which also has problems of staining that cant be cleaned. We were told the repair would cost $200 for the panel, and if that doesnt work, another $400 for the other panel. In reviewing other complaints for this Whirlpool stove, there are enough complaints to recall this item or at least give deep cuts for the parts to repair this stove. We have purchased other Whirlpool items, and this one is not well made and too costly to repair. It should last at least 15 years or more. Cant Whirlpool do something about this obvious problem?

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

I have purchased two Whirlpool microwaves since 2007. The first unit lasted 5-1/2 years, the second one lasted only 2-1/2 years. I used it at dinner but several hours later it was dead. After reading other reviews I have decided it would be cheaper and less stressful to get a new one. So Tomorrow I will be purchasing a new microwave which WILL NOT be Whirlpool. I no longer have confidence in any of their products.

Whirlpool Dishwasher MOD#WDT970SAHZ0. I have to wash the dish before it goes in otherwise it doesn’t get food or anything off. It DOES NOT DRY at all. Even when I add the heat extended dry button. The normal setting takes 3 hrs & 12min to run & again, doesnt really wash & for sure doesnt dry. I have added jet dry. I called and they keep telling me it should have more jet dry! Ugh! I now have rust happening because it doesn’t dry. DO NOT BUY THIS MODEL.

Problem of refrigerator is working good for a few days, then the freezer is all melted down for a few days, then back to working good again. Model: FD2560HES. Serviced on and by: 7/16/2015 - ** - told me the controller board is bad, need to order part. 7/23/2015 - ** - replaced the controller board. Resulting same problem. NOTE, which means my old controller board is as good as the new one. 7/30/2015 - ** - opened the freezer, back of refrigerator, told me the compressor is no good, gave me an estimate of total cost $817.86. I did not accept the proposal, and I did not agree the compressor is no good. I called and scheduled for service after and scheduled to have service on 8/4/2015. Then got called from the office, said, Cant come on 8/4/2015 and told me I have to pay the $95.00 first visit. So I called and spoke to the manager, then scheduled for next service.8/13/2015 - ** - when he came, the refrigerator is working fine. He said, Cant diagnosis the refrigerator, told me to call for service when it is not working. He said the compressor is good. 8/15/2015, early morning the freezer is all melted. I called, been told cant service the same day. 8/17/2015 I called the office (1-888-717-9322), requested to talk to the manager, promised to call me back. By this date 8/28/2015, still no call back from the manager. They are located in Michigan. I was told the local office address is: 9582 Katella Ave., Anaheim, CA 92804.

I am on my 3rd refrigerator from Whirlpool. The first one lasted 8 years, the second one lasted 6 years, and now the 3rd one has only lasted 4 years. This is just too much money to pay for a supposedly nice quality product and it go out as the warranty goes out. The second we had to replace the icemaker 3 times and a compressor. Now the 3rd is not cooling.

The beat goes on. My Cabrio washer is still down. After working for a mere 14 months, the control board died, and the machine would not spin out water. The repairman ordered a new one. Though the part arrived several days earlier than predicted, the repair service said they could not send anyone out, until our scheduled appointment. At last, today, the repairman arrived. I am ready to start whittling down the mountains of laundry we have stuffed in every closet. Some areas of my house are starting to smell like a locker room. It is not convenient for us to haul everything to a laundromat, or impose on a relative who lives nearby.The repairman was in the laundry room for at least 45 minutes, and then very apologetically tells us that the part is bad. It will not work at all. He has ordered a new one, and requested rush service, which I think they will ignore. I cant help but think these parts are manufactured somewhere outside the USA. Well, listen to this Whirlpool, I would rather pay $25 more for this part, and have your washing machine work. Dirty laundry might seem unimportant to you. It is not unimportant to us! If you cant do better than this, make something else. I am furious, and will spread this news to everyone I know, and I will report on this situation again.

I purchased a new gas water heater and had it installed by a plumber. It worked for 3 weeks then we lost hot water. I called the 877 number and got shoveled around to 3 or 4 people. I got hung up on twice then spent 45 minutes repeating all the instructions that are on the tank to relight the pilot light. They agreed to send a new valve. The first time, I never received the valve (after 10 days) and had to call back. The second time I called in, I spent 20 minutes trying to get another valve sent. The valve I, finally, received had plumbers dope on the back and clearly was previously used. Had the original plumber replace the faulty valve? And lo and behold, the second valve didnt work either. I have no idea why a gas water heater would have any issues after 3 weeks. I bought it brand new from Lowe’s. It is obvious that Whirlpool makes shoddy products. They have very poor customer service and care little for the customers’ time either in correcting the problem or being without hot water. I have spent over 2 hours with Whirlpool. Only to 3 weeks after the initial call, I still do not have hot water from a heater that is less than 2 months old! I called them on the issue of the second valve not working and they put me on hold (after 10 minutes the line went dead and I was disconnected) despite the fact I asked them not to do that!

Whirlpool Microwave model #GMH5205XVS0 - Same story as many of these other reviews. Similar reviews on Amazon as well. We bought a new house early in 2011 with all Whirlpool appliances. We have gone through 3 magnetrons in 2 yrs. Now Whirlpool wont do anything for us. We will have to buy a new microwave. It just stopped heating all 3 times and the magnetron was replaced. Now it has happened again. Ridiculous. I will never buy a Whirlpool appliance again. This model # should be recalled. Its a lemon and sounds like it could be a danger as well.

After just 2 years, the electronic control board failed. The temperatures are stuck on the coldest/high mode for both the freezer and the refrigerator, spoiling some foods. The parts and repair are going to be $300. Whirlpool will not replace the defective part or pay for any repairs. Shame on Whirlpool! Model No. GB2FHDYWQ01.

My husband and I bought a new Whirlpool Cabrio Platinum Series Washer and Dryer in November 2012 from Lowes. My clothes, especially towels, smell like mildew and mold since I have used it. I thought it was just me. I have even thrown some items away when they smelled so bad. I love doing laundry but this not being able to have clean smells was driving me crazy. I tried everything I could think of but to no avail. Finally in October of this year 2015 my washing machine began to make a loud noise. My husband said sounds like a bearing is going out. I immediately sought a repairman thinking that it would be a simple fix. $420 later I had a new bushing, bearing, sleeve, etc. The machine was still making noises even louder and my repairman came back, this time to the tune of $180. So far weve spent $600 on a washer that we gave a little over $800 for. Now I have a UL code showing up when my load is almost completely done and guess what? My repairman says he has yet another part that should take care of the noise but he wasnt so sure about the panel. He may have to do a little research on that. I think all I have is a repairman that is a parts replacer so we were forced to purchase a new washer yesterday and my Cabrio is sitting in my garage. If someone needs a boat anchor just please contact us. I wrote a letter to the corporate office of Whirlpool before I even knew that so many consumers were having problems. Two repairmen told me that the Cabrios were junk. Most of them belonged in the landfill. Whirlpool customer service called me and offered me a discount coupon on a new washer. I told them that I didnt think I needed another piece of crap. I also questioned them as to why they could foist these crappy machines off on the American public. They had no apologies whatsoever. While researching what brand washing machine to invest in, I realized that there were numerous complaints regarding the Whirlpool Cabrio. With as many consumers who have been taken advantage of with this awful product, why cant someone do something?

Purchase whirlpool washer model W2W4800xQ2 in Sept. 2012. Had problem with lid lock after warranty. Now lid lock does not work, takes 1/2 hour to start wash and does no spin. Called whirlpool and they will do nothing. Repair will be $200. I opt to just purchase new machine. This machine is one piece of garbage.

In the last two years I have purchased a new Whirlpool Duet washer and dryer with base, Whirlpool Gold refrigerator, and (less than a year) a built-in Whirlpool microwave. I have already had to replace the gaskets on the washer, which required a $65 deductible. I had to spend $65 on my service contract deductible for my dryer as they have had to order me a new motor and thermostat. My refrigerator had an appliance bulb as required installed; however, it still burns the plastic covering. I have not called on that yet. My microwave, which is less than a year old, has a small crack inside the door and part of the handle has broken off.

We purchased a Whirlpool Cabrio, top load washing machine WTW6600SW back in 11/07. Last week (todays date is 8/19/11), the machine sounded like a plane taking off when it spins out. When the local service technician came out this week, he said that the bearings are shot. Since the tub and bearings are all one part, we were told by the technician that the part and labor costs would be $379.99 to repair it. We originally paid $799.00 for the Cabrio, less than four years ago. Whirlpool would not even give us a concession of a new tub and bearing part as it was out of the 1 year warranty.

In all of my 50 years of marriage and buying stoves, I have never had an oven breakdown. I live in Canada - I purchased three appliances, all Whirlpool 2 years ago. I had to have a service call on the fridge three weeks ago - a little rubber nipple was clogged up and water was running into my freezer. Bill $100.00 - two weeks ago, the broil element in my stove would not turn off when the bake cycle heated up. Actually, you did not have to press the fast heat button as the broil came on by itself. I have been waiting almost two weeks for the part - today I was told it would be another week. The part has to come from the US - what ever happened to Whirlpool Canada???? - I am told the bill will be $350.00 and maybe more plus the service call. I do not find this acceptable. What do you do when you have already invested the money in the product. Bring back the old Moffat stoves. I would like to be reimbursed for the money I have put out and will put out.

I have had almost all the same issues everyone else who reviews the Cabrio WTW7800XWO washer. Now, the spring loaded lid wont stay up, so we have to use the Downy bottle to load the clothes. Thankfully, I have not had the lid crack... yet. We have had it serviced once while under warranty, that tech told us it wasnt good to wash small items, like socks. Are you kidding me? Now, the heavy lid falls on you while you are loading. I also have the Cabrio dryer, and we have fixed that more than the washer. DO NOT BUY A WHIRLPOOL CABRIO. We bought it because it was the largest unit in the store, but it is junk.

Rather than replace the heating element in my 15 year old Sears dryer, I opted to replace both my Sears washer and dryer with a new HE Whirlpool. It was the biggest mistake that Ive made. The washer does not have an agitator and the clothes turn into a twisted knot. Deodorant did not wash out of load of three sweaters. When I called tech support, the woman told me that the washer met specification. I suppose that means that it uses only limited water but has nothing to do with the cleanliness of the finished load. I was told by the repairman that future calls regarding unclean clothes would cost me despite a warranty that I purchased from Lowes.He suggested that I wash on using the Bulky Items setting and with a specific laundry soap. The setting provides more water but without the agitator, my clothing turns into a huge knot and comes out of the machine dingy despite washing loads for over 60 minutes at a time. My electric bill has gone up because I have to also add an extra rinse. The machine frequently become unbalanced. My dryers seal started loosening up two years after my purchase and finally became twisted in a sheet and ripped itself loose. Whirlpool has lost all future business with me.

This is a horrible washer. It leaves a white residue on dark clothing and the clothes need to be rehashed. There is water that settles in to the fabric softener dispenser. Now the washer is leaking. My husband replaced the tub seal or whatever since he found this could be the problem while searching the internet. It is still leaking and we have no idea from where the water is coming. I agree with the other person that the Whirlpool customer service cares not that theyve manufactured a defective product.

Whirlpool Cabrio washer - Its very expensive and it quit after 3 years. Repairman said computer component went out and it would cost $450-$520 to repair and it wasnt worth it. He also told me I should have read reviews first. Whirlpool said I should have bought extended warranty. No more Whirlpool appliances will be bought for our homes or business.

We purchased a high end KitchenAid Refrigerator Dec 2018. Rust developed on water dispenser door in less than year. They would not honor warranty. Since March we have had ongoing cooling problems with 5 service calls and 4 different fixes and unit still doesnt work. Local authorized service company, Fields, in Jacksonville FL is incompetent. Whirlpool doesnt return calls. The products value is not consistent with the high cost. Here are the gory details. Ref: Setzers, Jacksonville FL (sold unit). Fields Jacksonville FL (factory authorized service company).Less than 1 year in, it began to rust. We called for a Warranty check. Fields Appliance (their factory authorized service company) came out and agreed all 5 doors needed to be replaced. A month rocked on, finally we called to find out where the doors were, and were told Whirlpool (Makers of Kitchenaid) denied the claim. Citing that we lived near the coast! Well, our other appliances arent rusting and the refrigerator doesnt sit outside! They sent us a 6 oz bottle of rust cleaner. A few months later, this refrigerator stops cooling! This was in March, 3 months out of 1 yr warranty. The refrigerant system is warranted for 5 yrs. This was also right at the beginning of Covid 19 shutdown. Fields could not give us a appointment, due to shutdowns. So, I called a local company to fix it out of pocket. He discovered a leak in the coolant lines, fixed the leak and replaced the coolant ($453.61 on 4/9/20). Great, it works! About 3 weeks later, it stops cooling again. Called local service repairman out once more to see whats going on. He replaces a thermal bi metal sensor and well ahh! It works again ($100 on 4/28/2020).About 3 weeks after that, it stops working again! We are thinking by now, its a problem for Setzers, Whirlpool, and Fields. We call the local service repairman out to confirm and he states that the evaporator fan motor will need to be replaced, and that part replaces all sensors as well ($59.99 5/28/2020 service call). We call Setzers and schedule an appointment with Fields. First appointment we could get was 6/16/2020. Guy comes out, and cited a factory defect, per a technical bulletin he had, and relocated a sensor. Simple as that, he assured us it was fixed! Even though I pointed out it felt no cooler when he packed his things to leave. It did nothing! In the background Setzers (when they would call back) were supposedly working with Whirlpool to help fix the problem! Whirlpools reply was that since our repairman was not factory authorized, it completely voided our warranty! Explaining we had no choice, since Fields wouldnt come out and by now we are without a working refrigerator for 3 months, they could care less! Feeling totally frustrated, we call Fields again! On 6/19/2020, they send out another repairman. This guy came in, opened up the back, and immediately stated the refrigerant was overfilled. Didnt do any diagnostics, just told us that we were **, and walked away, without even putting the refrigerator back in place! Neither Fields rep hooked up a diagnostic tool to confirm any real issue, I guess they just knew! Total incompetence! So... As of now we have paid the local repairman ($448.33 on 6/26/2020) to order the evaporation fan motor and install it this coming Monday (7/20/2020). Total amount out of pocket at this point, $1053.90. It took that long to get here! Wish us luck! Setzers wiped their hands clean of the issue and told us to call Whirlpool. We did have not ever received callback.

I got a Whirpool Cabrio Washer that I purchased in 2008. I am constantly getting ul code. If washer is leveled, it leaks water out the bottom rear of the washer. Its a piece of junk. I called Whirpool to no avail. Whirpool will not stand behind their product. They know they have a problem but wont do anything about it.

I am very upset about this Washing Machine and Dryer. I did my research in 2012 and found good reviews on drum size, water usage, bells and whistles. I purchased the set in Feb of 2013 (its on Jan of 2017). NOT EVEN 3 years later, I write to say that my washing Machine is ready for replacement! I paid 989.00 for each and last year the Spring on the Glass Top was worn away, I am told because bleach was splashing up in the spring area. Cost to fix with a local repairman... $235.00. Now I noticed a small amount of water on the floor, move the washer and there is a LARGE amount of water Stain and my cycles keep popping up UL. Two separate repairmen (because I didnt believe my trusted first one) tell me the cost for the shot bearings and seals will cost almost as much as a new washer! I am a family of 3. I have a daycare so do a few extra loads, but am not using this any more than average to low use. Not to mention that on top of all of this the computer appears to be shorting out and to order a new panel the repairman places that at an EXTRA 300.00. SO UPSET! The dryer dries very nicely and is quiet however, the motor went out 6 months ago and we replaced that, not wanting to but better fix than scrapping it only 3 years into a product expected to last well over 10! The little clip on the door to lock it is also loose and hardly locks now. The repairman is having trouble even finding the small part. Young Couple Expecting to have a brand new 1900.00 washer dryer set last a long time only to be out of warranty and already needing to buy a new set! DONT EVER BUY A CABRIO WHIRLPOOL.

I purchased a Whirlpool refrigerator from Home Depot in Nov, 2013. Model is WRF560SEYWOO with water in the door and bottom freezer with ice compartment. This is a very small refrigerator for my very small space. I swear these companies program their appliances to break down exactly 1 month after the warranty is up. Thats what happened to me. Dec 2014 this horrible loud humming noise started. You could hear it out on the sidewalk! Then the door with the water just detached from the bottom and screws and plastic pieces fell out all over the floor. The day the repairman came he noticed all the rubber lining in the doors was detaching and huge chunks were falling off of it. He called to get replacement parts for everything and whatyaknow, all parts for this unit have been discontinued!This is what we did to cope with all these defects. The noise was caused by ice building up around the exhaust fan because the unit had stopped defrosting that area, so every 3 days I have to get out my hairdryer and melt the ice at the back of the unit. Next we MacGyvered the door so that it is resting on the freezer door. Next, he brought in some tape and taped all the pieces of rubber falling off my doors!! This frigging frig cost me $1,653.00!! I AM FURIOUS. Why isnt Con. AFFAIRS DOING ANYTHING ABOUT THIS?!

I bought a new house 2.5 years ago with all new whirlpool appliances. This week Im told the washer transmission is defective. Unbelievable! I only wash 4 average loads per week. This is a problem I would expect in 8-10 years. I am going to replace the unit with another brand.

Whirlpools front load washers do not have easy access to the drain pump filter. The entire front of the machine including the door has to be taken off to access the filter. When putting washer back together the parts are cheap and screws break. Most companies that sell front load washers provide easy access to the drain pump filter. Buy one of those instead of a Whirlpool and you will save yourself a lot of time and hassle.

I have had this machine (Indesit IWDE126 Washer/Dryer) for a very short time; the washer is great. It does a 20 minute daily wash which is good however the dryer part screws up everything you put into it and ironing, even with steam, makes no difference at all. The WORST part is the organisation DONT CARE. I wrote to the Chief Executive, Jeff Fettig, who neither acknowledged my complaint or responded to it. I made this complaint in October 2016 and STILL do not know what the outcome is. If you are reading this review I honestly would look elsewhere for a better machine. Try MIELE. They are expensive but 2000% better.

Its very noisy, and there are no blankets to purchase to deaden the noise. The dishes all need to be dried by hand. Some of the dishes come out dirty. I would never purchase another Whirlpool dishwasher.

I purchased the Whirlpool Flame Lock water heater (model BFG1F4034T3NOV) in May of 2008. Within a little over a year, it stopped working. I was able to get the manufacturer to send out a repairman and install a new kit. It worked great for 2 years. Now, here I am again with the pilot light going out daily. So I went to Lowes and purchased the thermocouple, and a friend installed it. We still have to light the pilot light twice a day to have hot water for showers.

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

We own this range and in 6 years its 4 main boards and 3 touch pads were replaced. The electronics suck big time. We have nothing but trouble with this range from day one and out-of-pocket cost for service calls that were recommended by whirlpool. They were absolutely no help. Expensive piece of crap! I will recommend NOT TO BUY ANY WHIRLPOOL PRODUCTS. The electronics suck big time! I kicked the Jenn Air out the door and to the land fill. I bought a new range, but not whirlpool product, with dials only, no electronics!

I bought this nightmare machine one year ago, and stop working. If I try to program a cycle it put itself lock so I can not use or program any cycle. I can not open the door and start a noise like it was draining without clothes at all. And when finally it ends, the machine is like dead, no works, no programs no nothing. I am sick of this appliance. It is almost new and just does not work as it should be. But the worst is customer service, OMG. They lie about everything. The technician came to see what was the problem and told me it was the card, so he could not do anything until the factory send the piece to the place where I live. Well this happened one month ago and I am still waiting for the service. My guarantee was still on time, but every day at customer service they have a excuse/lie that the piece is on my way and service will be completed. Well I am still waiting and nothing happens. I am desperate. No one cares about the customer. If I would have known or read the bad reviews about these washing machines I would have never bought it. I got it at Walmart. I regret deeply. I do not know where or what else to do. Nobody cares or listen. Shame on you Whirlpool.

Stainless steel, easy to adjust, cools very well installed in a RV instead of standard RV fridge. Took a little bit of carpenter work to make Whirlpool fit but well worth the effort. The only problem I have with the fridge is that whirlpool wont honor the warranty because it is installed in a RV.

I have had an extremely frustrating experience with Whirlpool refrigerator WRT311. It broke after 6 months. So far it has been diagnosed twice with a faulty compressor and leaking coolant. Whirlpool will (seemingly) never replace an appliance--even if it makes no sense to keep trying to fix it. This is a $600 refrigerator! I cant imagine how much they have spent in repair costs. They simply send a service tech time after time, jerking the consumer around with no regard for what we have to go through to arrange 6 tech visits, some of them multiple hours long. Yes, we have had six tech visits, for a total of 10+ hours, and six weeks living with a broken refrigerator. As well as 30+ phone calls, hours on hold, etc.The refrigerator is loudly throbbing away after being refilled with coolant twice, and is still leaking coolant. Are they hoping the customer just gives up and buys a new appliance on their own? I wonder about the many positive reviews of their appliances: Are they fake? Are they churned out by Whirlpool? I have no confidence in this company. They are inept, if not crooked, and I would advise buyers to beware of poor quality and extremely poor warranty and consumer service.

I purchased a Whirlpool classic range model number rf263LXTS0 on January 2010. We had some hang-ups on the kitchen renovation and were not able to install the appliances until May of 2011.I used the cooktop that evening and was very pleased. I then went to use the oven 2 weeks later and it did not heat up. I asked the contractor to check things out (maybe it was something minor that he could fix). He checked the things that he installed and everything on his end was working fine, so he told me to call Whirlpool.A service technician came out and, within 10 minutes, said that the oven controls were defective.I paid $450.00 for the oven originally. The service technician charged me $136.74 for 10 minutes to tell me that the oven control needed to be replaced (that is the major part of the oven) and that it would cost me $318.41 to replace the part.I called Whirlpool and explained my circumstance and Paula, the supervisor from Tennessee, said that there was nothing she could do. I told her that even if I installed the oven back in January of 2010, the major part of the oven should last more than 1 and 1/2 years.What terrible craftsmanship and crappy customer service. It is sad that customer service cant stand by their product and Whirlpool has to rely on making their money on repairing defectives products. I now have to go out and buy a new oven. I also buy a lot of appliances in my business and I will never buy a Whirlpool again.

If you are searching for a top freezer refrigerator that works and keeps the food cold, do not buy this brand. I recently ordered a brand new refrigerator from Home Depot, the Whirlpool brand. It was set to standard factory settings, and I let it sit plugged in for 24 hours as required. The fridge was remaining in between 45 to 50°F, and I let it run for another 24 hours after filing a complaint and talking to the people at Whirlpool. The fridge still cannot get beneath 40°F, though the freezer seems to be okay. I spent almost $1000 on the refrigerator, and I’m very disappointed in the quality that this supposedly good brand produces. I went on Facebook marketplace, found an old 1995 Kenmore and bought it for $50. It works so much better than this brand new, fancy looking refrigerator, because back decades ago is when they actually took the time to make quality products, and didn’t make the crap that they do now that breaks down instantly or after only a few years. Unfortunately, and my researching has confirmed this, appliance manufacturers today create bad quality products that break down shortly in order that you will have to purchase more of their products after only a few years. Refrigerators used to last decades, now you’d be lucky if they lasted maybe 8 to 10 years. Trust me on this, don’t waste your time on this brand. A refrigerator should have no problem on factory settings getting at or below 40°F within 24 hours. DON’T BUY THIS JUNK!

I bought a portable Whirlpool dishwasher on Jan.16 2016. We didnt buy extended warranty. After all, it was suppose to be new, should outlive us. It wont drain, my husband took the top off to see if he could fix it since I was told by Sears that no repair person is available in our area. I am only 10 Km from Saint John N.B. He found he couldnt take the front or back off, its all one piece, he is 84 years old. Under the top, it shows different colored screws, which tells us it was a used one or had been re-conditioned. I am very disappointed in Sears, have been a customer for many years. Everything in my house is Kenmore except for the dishwasher, only because they had no Kenmore. I might add that it wasnt used much. Its just two elderly people and only used when we have company. I cant afford another one. I bought this one from 1,000.00 I won on Lotto Max. I am so upset about this. Appliances should last longer. My Kenmores have.

This Whirlpool Gas oven with 5 burner top is very good and has given us 12 years of good service so far. The only issue is that the stovetop and oven are not easy to clean and keep clean. The finish is good and has no chips. I would expect the top to be easier to clean and keep clean with the finish technologies available. Same for the oven window glass - it is not easy to clean and keep clean.

Whirlpool® Gold® 5.8CuFt Capacity | GAS Stainless - This was not an inexpensive stove. The self cleaning oven function is a total failure. You are not supposed to use oven cleaner on the glass, it now has obscured the view into the oven. The top of the stove is very difficult or impossible to clean. The knobs are a dangerous issue. They will fall off at the slightest touch and the stainless markers around the knob are just a stick on label. The oven temperature is not accurate. The bottom drawer is completely rust spots on the inside. What more can I say. Oh I know. Whirlpool your quality is a disgrace and I want a refund.

I have been using Whirlpool brand of appliances for over 40 years. They have always served me well and very dependable. Im a semi retired HVAC contractor and also installed Whirlpool heating and air conditioning systems in peoples home, also very satisfied with the results.

Do not under any circumstance end up with the Whirlpool fabric washer and or dryer in your dwelling to wash and dry your clothes. The washer, model # WTW7000DW0 and dryer, model # WED7000DW0. I am so upset with these units and the company I bought a 5 year extended warranty thru. I cannot put down in words what I think, because this review would not be published. Do not even accept these units, even if they are free. Even the repairmen who have been here said they would not buy these Whirlpool junk washer and or dryer series. They acknowledged the problem and said nothing could be done even though there is a legitimate problem. Not only is there a problem with the washer, the dryer as well has serious issues. All washes have to be put on the deep water cycle and some loads have totally dry spots on clothes where the clothes did not even get wet after the washer went thru the complete cycle. Also, get this, this washing machine even has to be cleaned itself with a cleaning tablet run thru a cleaning cycle. What happens are the clothes get a nasty, slimy, white muck on them. Even, immediately after the washer gets cleaned, sometimes the clothes 32nd up with this muck on them again. If you do not see this muck on your clothes before putting in the junk dryer, then the clothes have to be washed and dried again. This washer is supposed to be efficient, not a chance. It gets costly having to purchase the cleaning tablets and the washer(28th only two people in the household) has to be cleaned a lot more than what the manufacturer says and I called and asked. Pure junk, do yourself and even your enemies a favor, stay away at any cost, and like I said, even if they are free.

We purchased 2 Whirlpool Cabrio washing machines in 2011. Both required service calls in June 2015. After 3.5 years, the repair company diagnosed that the Whirlpool Cabrio model number WTW7800XW2 bearing needed to be replaced for an estimated $650.00 and recommended that we purchase a new machine. The other machine was spewing water out of the side of the machine. The repair person took the machine apart and could not duplicate the problem.

All JUNK!! Replaced all new within the last two years. The washer I replaced was twenty + years and was still working fine was just upgrading, big mistake! Washer is sounding like it is going to walk out the door. Replaced dishwasher after twenty years and the new one was leaking within one year and recently got replaced. The new one did not last one year and also is leaking. Now washing dishes by hand. Lastly replaced hot water heater and that is junk too. Has six year warranty after one year pilot light wont stay lit, Whirlpool said would replace the gas control valve for free but I need to pay to install. I WILL NOT PURCHASE ANYMORE PRODUCTS FROM LOWES OR WHIRLPOOL AGAIN!!! HOW CAN A RETAIL COMPANY REPRESENT SO MUCH JUNK?

I have had my Whirlpool side by side for over 12 years. The 2 minor problems it has had, the repairman replaced the parts and she’s working great. Hope I’m not cursing it. Whirlpool 19.8 cu ft. Model EDOGTK.

I purchased a Whirlpool top load washer that has been ruining my wasted items. My terry cloth towels all have pulls in them, knit polo shirts have pulls and holes, sheets and other items of clothing get caught and stuck under the agitator which then take a great deal of muscle power and struggle to release them. I have had the agitator replaced 3 times to no avail! Whirlpool is not willing to admit that I have a defective machine and will be sending another service repairman to try and fix the problem - this time, no charge to me after many tries and frustration. Customer service is not good unless you are lucky enough to get a supervisor who is willing to listen. We shall see what this next service call brings. I do not have high hopes and will keep you informed.

We bought a Whirlpool side by side refrigerator new. When the first one was delivered it had electronic problems. We sent that one back. The next one, same model, seemed to be alright for a few days then it developed electronic problems. My son discovered the problem was caused by a faulty door panel in the freezer. The panel would come loose and if you knocked it back in place the electronics would work until the panel came loose again. Whirlpool would do nothing about our complaint. Now the refrigerator section freezes things. We paid to have it fixed 2 months ago and now have the problem again. The repairman said he had brought up concerns in meetings about the same door problems and been blown off. Our food is freezing in the refrigerator again and Whirlpool has blown us off again. We will never buy Whirlpool again. I trusted Consumers Report when I bought the Whirlpool and that goes to show you that doesnt always work either.

Four year old Whirlpool Refrigerator/Freezer Model W10771736A. Ice maker broke right after the warranty ended. No refrigerator or certified whirlpool repairman was able to fix the problem. Our microwave is cracked on the side, and it is only four years old.

I have had my washer & dryer about 12 yrs. It has given me great service; however the spin mechanism on the washer stopped one month ago. It was replaced thru my home appliance warranty. I need the front loader style because Im disabled now, and cant take clothes out of washer. My previous set was Kenmore & it lasted 20 years. Looking to purchase in 2 months.

I purchased a Whirlpool Refrigerator Model # WRF990SLAM00 in May of 2013. My wife started noticing ice build up on the ice maker in the refrigerator section of this French Door model. We had it serviced for the same problem 4 times and the problem still existed. At this point, Whirlpool offer to give us our money back, and here is where things got interesting. My wife spoke with a Sheila who was to issue a check to a third party company who would then pick up the refrigerator and give us the check. Sounds simple enough, huh? The company was to get the check in 7-10 business days so we bought a new refrigerator, a Samsung this time, and scheduled its delivery for the time frame we were told the non-functioning fridge would be picked up. My wife could not get in touch with Sheila, which was always a problem, and we talked to a Beth who told us that this whole process had not even been started yet. Well, we are having our new fridge delivered and still waiting on our check and for someone to come and pick up this American-made piece of crap! We wanted to buy American, but this is what we got, a piece of crap!!

I am extremely dissatisfied with my Whirlpool refrigerator. After less than two years, the entire cooling system has gone out basically rendering it a piece of trash. Unfortunately, Whirlpool is only going to absorb the cost of parts, so I still have to shell out $4500 to have a refrigerator repaired that is nearly new. This is not acceptable. I will never purchase a Whirlpool appliance again.

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

My Whirlpool microwave door started cracking little by little. Pieces started falling off. My warranty company stated it was cosmetics, so my warranty did not cover it. Finally, the whole door came off. The warranty company finally agreed to replace the door. Less then a month after replacing the door, part of the handle cracked off. There must be some sort of defect in the plastic used to make these doors, and if so, there should be a recall.

The Whirlpool I purchased has been the worst ever! Nothing comes clean even when I hand wash everything first and never has even from the beginning. I will never purchase a Whirlpool again. Now the machine wont drain I have gone through all the recommended steps for cleaning. The Whirlpool stove is almost as bad!

We purchased a Whirlpool Cabrio washer in 2009. It makes awful sounds during the draining and spinning cycles, has started leaking in the past month and now, several error codes and will not finish a load of laundry. We have a family of eight and thought that we had bought a very dependable product for what we need. Boy, we were wrong!

We purchased a 50 gallon water heater in 2005. In 2008, the thermocoupling unit went out and Whirlpool sent us the replacement part and we had a plumper install the piece (at our expense, of course).Now, we are running into the exact same problem 3 years later with the pilot light not staying lit. We had a plumber come out this weekend and replace the part but unfortunately this time, its not fixing the problem. The plumber charged us $178. He said that he can replace the thermostat on the water heater but that would cost us close to $400 to replace and makes no sense to do since purchasing a new one wouldnt be much more than that. I am so frustrated with this water heater; I just want to throw it out in the middle of the street! We still have 3 years left on our warranty too. I have 2 very young daughters who need to take baths, and who also dirty up quite a bit of clothes that need to be washed in warm water. What a nightmare! Whirlpool, help us!

In June of 2010, I purchased a new Whirlpool Estate EED4400WQ0 dryer (serial number M01156261) with an accompanying washing machine. It has been in a clean, climate-controlled environment and gently used by my family of four for just short of two years. Last week, I began to notice that the clothes coming out of the dryer were cool and damp and it quickly became apparent that the dryer was only heating intermittently. This morning, the service person from the dealer who sold me the washer and dryer set (and a Whirlpool dishwasher a few months later) told me that contacts on the timer unit were bad and that the entire switch would have to be replaced. This is no small portion of the machine and the part alone will cost me about $150. After labor, we are looking at an expense of approximately half of the original cost of the machine - in less than two years. I called the Whirlpool’s customer service line to ask if there was anything that could be done and the answer was: Sorry, we cant do anything for you.” It is not acceptable to me for an appliance to become that expensive that fast. If Whirlpool cant do anything for me about this, then I will not be purchasing anymore Whirlpool products.

Such an expensive refrigerator but poor quality. Bought at Home Depot back in November of 2019. The bottom Freezer freezes up messing up everything only three months after purchase. I wouldn’t recommend it at all to anyone.

AquaLift Self-cleaning does not do the job as advertised. It does very little to clean the oven. Sitting-on-the-floor-in-front-of-the-oven scrubbing is what is needed to clean the oven.

I bought the Whirlpool Cabrio top loader set in 2006. Honeymoon was over after the first year and I had to change the dryer element then the washer with the F51 code six months later. Last year, I had to replace the heating element again! For the last six months, I have been dealing with the dreaded UL on the washer. I cant afford to pay a technician $100 to come out and tell me whats wrong let alone what they will charge to repair a problem that, from the looks of this message board, will never be fixed. I have no choice but to get it fixed in order to sell the ** machine. I paid $1400 for this brand new set and have already invested $500 in repairs. How is this possible? I had a 20-year-old machine prior to this and never had an issue. There are lemon laws for cars, why arent there any for appliances over a certain amount? How in this day and age can a company be allowed to sell such garbage? I will never, ever buy another Whirlpool appliance as long as I live. Any other brand can have my money any day.

I purchased a Cabrio Platinum 4.6 top-loading washer with model number WTW8240YW0 in January of 2013. My machine has a consistent/re-occurring problem of not rinsing the clothes well. After multiple washings, including the extra rinse, my dark clothing still come out with lint, dog hair, dirt and white residue all over them. I have already checked to see if the hot/cold hoses might have been crossed. I also checked for water pressure to see if water is exiting the machine properly. It is still under warranty, and I have scheduled for a repairman. However, I will most likely return the washer to Lowes.

Our 2005 whirlpool duet washer steel drum and plastic tub broke. My husband diagnosed the problem and opted to fix it to save money. The parts are under warranty but you still pay labor and technician visit running up to $250-$300. The plastic tub was obtained only if we paid for it $100 and the steel drum they sent under warranty. The plastic tub has a hole with a black plug and sensor in it. There is a discrepancy in the measurement of the old tub and new tubs hole that is slightly larger, therefore when installed a steady stream of water leaks out. I now have 3 plastic tubs as that was their solution, to send more of the same that did not measure correctly. An investigation was done to determine they were the correct parts. As asked we had a whirlpool technician come to verify parts were correct and being installed correctly and the parts sent would not fix the machine due to the hole discrepancy. Many calls were made to whirlpool and they continue to give me the runaround. They now are not taking their technicians information. The technician has given the information to 3 sales reps in the new england area and made several phone calls to whirlpool and no one is willing to give us a solution.

I purchased a Whirlpool gas stove model #WFG540H0AH from Sears in March 2103. Since that time, the oven has repeatedly broken. After two major repairs, the repair company said the fas venue (?) suspect board was defective and needed to be replaced by the manufacturer. After 3 weeks of back and forth calls with Whirlpool customer service, the only solution they provided was for me to purchase a new stove at a discount with no compensation for installation, the gas connection kit, or haul-away of the old appliance. The original stove cost me $1100 including the installation, haul-away and taxes. The replacement option would have cost me $800 and still did not included haul-away, the gas installation kit, or taxes. Hardly an affordable solution. Whirlpool at no time addressed that a part on the stove was deemed defective.

I paid for an extended warranty. Dishwasher not functioning properly- it stops mid-cycle. Had a tech out twice who insisted nothing was wrong. Extended Warranty customer service refused to honor my claim. Will never buy another Whirlpool product again. And buy an extended warranty! SAVE YOUR MONEY!

The machine is two years old. It cost over $1,000 to buy. From the beginning, we have had mold issues with the machine. The entire house fills with the smell of rotten eggs every time we use it. The machine is used daily so it doesnt sit for long periods. Despite all the complaints online about their machines, Whirlpool refused to acknowledge that there is a design problem with the machine. They refused to make any repairs or buy the machine back and their only suggestion was to buy more chemicals from them to use to clean the machine. We have done this in the past to no avail. Oh, they did offer to send out a service company but on my dime. Whirlpool needs to be sued and I only wish that someone would start a class action suit against them. It really stinks when you try and do the right thing and buy American only to have the company not give a crap about their customers or the fact that their product is garbage. About 10 years ago, I had a Maytag front loader washing machine with the same problem. Maytag bought the machine back on a pro-rated basis, no problem, no question. Of course, Maytag is now owned by Whirlpool. Too bad they didnt adopt Maytags customer service policy. I cant wait for them to go out of business - something they deserve.

We have owned our refrigerator approximately 7 years. We have replaced this fan 3 times and now it went out again. The store we purchased it is now out of business. I am so flustered I do not know if we should replace it again or buy a new refrigerator, I can guarantee we will not be buying another Whirlpool. Their part runs about $50 but how do we know that is not going to go out again?

Whirlpool Cabrio washing machine - We purchased the (best name brand) from Get It Now and all we ever had was problems. We will fill the washer 1/2 full of clothes and the clothes on top would not even get wet. So we have to do it again, to make sure the rest of the clothes were washed. Many times there was white smudge marks on the clothes, sorta like powder (we use only liquid soap that you recommend). Today I washed a child’s bedspread for the 4th time because the stains would not come out (from a cookie). I had to turn the bedspread twice just to get it wet. I used bulk load and heavy duty load and it doesnt work. Your product is a very big disappointment for the price a person has to pay. I will recommend that no one purchase this product. Your people need to do further research on who this machine cleans clothes.

My Whirlpool electric range has been a nightmare! I bought this thing 5 years ago and I am having it replaced on Saturday! It had a cleaning thing where I put in distilled water and 20 minutes later I could just wipe it out. Not true. I had to use oven off??? Next the oven would not work. Learned if I turned off the power it would reboot itself! The next thing it did was all on its own it turned the temp. from 250 degrees to a full BROIL. The oven now will not heat up to 350 degrees! I just blew $1200.00! On the other hand I did buy a Whirlpool fridge. It has been awesome!

Today I had the unfortunate experience to have to deal with Whirlpool customer service and claims. I WILL NEVER BUY ANOTHER WHIRLPOOL PRODUCT again! My refrigerator, that was purchased in 2013, has a door misalignment problem. It is a known problem with Whirlpool (service pointer W107317828). My refrigerator serial number and model number are affected. Because I am outside the one year warranty, Whirlpool refuses to provide service that is required to fix this known issue with my model/serial number. After having to talk to four supervisors the only resolution that was given was that they would cover the cost of the 7/16 hex nut ($4.33). Dont get me wrong I do appreciate the offer.The two supervisors that were below her assured me that no one can do anything to assist me further. The attitude of the second and third supervisor was pathetic. After over a hour on the phone I was so disappointed that I could not take it further. The cost that we are talking about that I am asking them to pay is $154.28. I am very disappointed. They say they stand by their product. To me standing by your product means that you will fix or replace any known issue. $154.28. I hope it is worth it to you Whirlpool. You lost a long time customer.

Mold in my dishwasher right after having washed the dishes!! This is the first time I have seen the mold on the racks (lots of it!). However, my neighbor also has a Whirlpool and complains of the mold all the time. Also, my dishes often do not come clean. I would not have purchased a Whirlpool, but it came with the house, three years ago. Therefore, I do not have a receipt for it.

I love my Whirlpool front loader washer. It is replacing the Maytag Neptune I had for a few years. This Whirlpool has outlasted that Neptune so far by 3 years! So far no issues. I only wish I had purchased the matching dryer at the time.

We purchased the washing machine on February 2, 2013 and initially noticed that some of the clothes were still dry when the complete load was over. Meaning that I am not saving water cost because I then have to rewash the clothes and pre-scrub the clothes. Then a little over a year later, the machine is making this extremely loud piercing noise when spinning. The cost to replace the part is $250.00+ the repairmans fee. Whirlpool says there is nothing they will do. From reading the other reviews, this is really sad because of the numerous people having the same issueS with a capital S. I definitely would support a class action suit.

Quiet Partner II - Our dishwasher racks started to crack and rust very quickly, about two years after purchase. We repaired the racks and tines, but the rust got worse. We replaced our dishwasher today with another brand. Many of the tines on the drying rack had rusted and broken off. We have been told to only purchase Nylon racks. I hope this is good advice. I must admit I had no trouble with the machine as far as cleaning my dishes. I just felt the racks should last longer than two years. Cost to replace racks was about the same as replacing the whole machine.

I purchased a range top from Lowes and a month and half my burners go out. I call Whirlpool and a service technician came out. Said that he cant repair the stove because a bug had burned out the burners and he cant repair the stove. I call Whirlpool and they told me that voids my warranty with them even though my stove is not even two months old that will not repair it and I will have to pay for it to be repaired. I asked Lowes and they told me that they only take back big appliances back before 30 days. Now I am stuck with a stove that I paid 700.00 for that does not work and I have 4 children to feed. I am sickened on how Whirlpool can do this to a hard working family that just wants a good stove. I hope this helps another hard working family. Do your research before buying from Whirlpool. I wish I would have.

This thing absolutely is total junk. It doesnt clean at all. I have to wash my sons sweaty uniform 3 times because the first two wash didnt clean it. A tub and washboard cleans better than this unit. A 600+ washer should clean the basic stuff. I remove clothes after it was finished and some of the clothes have dry spots where the water couldnt make it to. What kind of washer leaves clothes dry?I wish I came across this site when I was at the store. I did a search and the manufacture website and retail gave it positive reviews. I pretty sure the Whirlpool is paying people to write positive reviews. Technicians have come and gone telling me that there isnt anything wrong with it. That their diagnostic isnt detecting anything. Well when I call them again I will have the tech wait while I wash my sons sweaty uniform and then they can smell it after it goes through the wash. Im going call out a service tech until it works as advertise or they replace it. If I have to call them out once a week. That is what I will do.

My Whirlpool Gold Star aqualift oven stopped working right at three years, when the warranty ended. I paid the $650 for repairs to the stovetop, hoping this was a one-time situation. Six months later, my oven has quit. This product is not a good investment. Im very disappointed.

Bought a side by side whirlpool refrigerator last year. Door seal has come unglued so the door doesnt close unless press seal back in Every time we open the door. For the expense I would expect the door seal to last longer than a year.

We have been married 36 years. Since year one, me and my wife have owned nothing but Whirlpool appliances. They lasted forever. Approximately 4 years ago, we redid our home, and bought all new appliances, stove, refrigerator, dishwasher, microwave, front loader, washer, and dryer, Since then, 4 years ago, our refrigerator ice maker stopped working. 2 years ago, our dishwasher wont heat up, so it is useless to us, and the bearings in the washer are shot. I must say we are so disappointed in Whirlpool. We are barely living on my husbands income as I had to stop working 3 years ago, as I became disabled, but did not make enough money to be able to collect disability. We cannot afford new appliances, nor to fix them. I am sending you the model numbers of each appliance, hoping you will do something to help. This is just ridiculous. It is just my husband and me in the house (washer: WFW9200SQ02; refrigerator: GD5NVAXSA01; dishwasher: no model number, but it is Energy Star II 8575637). Please help. We cannot afford to replace this, nor repair. It is hard for me to go to the laundromat, then come home to dry. Standing long periods to to dishes, takes a toll on me. Please help.

We bought this washer brand new and as soon as it was outside the one year warranty the bearing went out. They had to order a whole new drum kit. A MONTH later I had a running washing machine again. The day after it was fixed it started leaking underneath the machine. Serviceman came and looked at it and said No must be the hoses (my responsibility to fix). Nope kept leaking and two months later Im doing laundry and an entire load of water floods my laundry room. Drum broke again!! SIX WEEKS LATER I still am waiting for a new drum. I had to fight to get Whirlpool to fix it again and they wont even return my calls about why its taking so long! We are a family of 8, so doing laundry at a laundromat is outrageous! Dont ever buy Whirlpool washers!!!

I am so thankful that there are others who are having the same problems with their washers. Since 2006, my husband and I have had words regarding who is not loading the washer right, why are the clothes still dirty, and why does the dryer have so much lint. The excessive amount of lint ruined my dryer. I get UL codes all the time! Before the UL flashes, it sounds like someones trying to break in. It is 2011. Despite the problems, it has not died yet. I am selling it and will never purchase another from them again. I have the dryer and it went out 2 years ago. It has problems with the motor. You can guess I did not buy a Whirlpool.

I have been having a problem when washing my jeans in the Whirlpool Cabrio that I have never had before with my old washer. When I wash my jeans, there are always a few pair, never the same ones, that have an odor like dirty dishrags on them. I always hang my jeans to dry so I do not think it is this. I have tried to add a freshener to the wash cycle, it does not work. I have tried to dry them in the dryer with a scented dryer sheet, it does not work. I am assuming after reading these past complaints from other consumers that it is not getting all of the clothes clean because of the lack of water. I always use the deep water cycle, but maybe it is not enough water as previously suggested. I have had an issue with blankets and other heavy items not getting clean and/or not even wet. Thoroughly disgusted with this appliance!! I love all of my Whirlpool kitchen appliances though!

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

My mom is 82. She purchased a Whirlpool refrigerator March 2013. Since her purchase, she has had to have numerous service calls. This was covered by her first yr. warranty. After the first yr., she purchased an extended warranty from Whirlpool. June 24th, 2014, her ice maker and freezer quit. My husband made numerous calls trying to get this fixed. He was switched back and forth from Whirlpool and Assurant. Assurant said it should be under Whirlpool and Whirlpool said Assurant. My mom felt that Whirlpool should have taken care of this problem. The refrigerator was a lemon. It was a French door style with bottom drawer freezer. We finally called the local dealer, whom she purchased it from, and he took it back. Gave her substantial credit toward another refrigerator, not Whirlpool! Very disappointed in Whirlpool... Will never purchase another appliance with this name!!!

This washer has no agitator. Drum will shake back and forth while load of clothes will stay in the same place sliding towards the opposite direction of the movement for 20 minutes. Clothes are not turning, no going up or down, just staying still and not getting washed as expected. Baseball cap and construction worker jeans didn’t washed as it should have been.

We purchased Model WTW81920758200YW0 on September 8, 2012. Its performance has been unsatisfactory, not cleaning the clothes as advertised. Not long after the warranty expired the main bearing failed, bringing a local service technician and we were left with a bill of over $300.00. Yesterday, the machine stopped in mid-cycle. The display went blank and the lid lock would not release. I called a local service company for a visit and the soonest a repairman could show up was next week.A call to a service we had used for the bearing surmised that without knowing the cause of the failure they could only guess that a circuit board was at fault. That visit would be over $300.00 with labor and materials. That was the last straw. We broke the lid lock to retrieve the contents and took a ride to buy another brand of washer. We went back to the appliance store where we purchased this machine to buy a Samsung front loader. The salesman apologized for selling the Cabrio in the first place. Good money after a bad product.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.