I purchased it in 2011 for $1100 Canadian. Smooth glass top and true convection. The controls were easy to use, and understand. What bothered me was that it stopped working just after the warranty ran out. I did my research, and found that the newer ranges that have the controls on top at the back have issues with the motherboard overheating, and causing this problem. I did speak to Whirlpool customer service, and managed to convince them to supply the replacement part at no cost. I paid my local dealer to install it. This repair lasted for just over 1 year. Same problem again.This time I could not convince Whirlpool to supply the part. FYI The part in question is the controller. Essentially a motherboard. All the controls are operated through this small computer. It is the only replacement part that costs over $100. Last I checked it was around $450 Canadian. The reason for the fault is overheating. According to the tech that fixed it the first time, it is the most common problem with this style of range. I find this concerning considering the only thing a range does is create heat!Keep in mind that you are virtually held over a barrel. There are only two companies that market their products under multiple names adding up to over 80% of the appliances on the market. They battle for that market by offering more bells and whistles, and less quality. The Range I replaced four years ago was 20 years old. I just replaced my Whirlpool 3 months ago. I went outside of the 80%, and bought a Samsung. Im rolling the dice, and went with induction top. My theory is it will produce less heat because it just heats the pot, not the stove top.Low quality drives me nuts. I want fewer bells and whistles, and more long lasting reliability. I should be able to go my lifetime and only buy two or three ranges. We really like the induction top. It works fast, and doesnt produce too much excess heat. Dual zone oven is a good idea. We werent looking for it, but there was a deal on. The dual zone induction range was only $50 more than the regular one beside it. Now my wife uses it all the time. She will have cookies in one zone, and a casserole for supper in the other. True convection is the other must have. It does a great job cooking everything evenly.

Whirlpool Gas Water heater purchased from Lowes in 2012. Have replaced two thermal couples and three gas control valves. Will not stay lit! Problems began within six months of purchase. Third gas control valve quit functioning today and Im on my way to Home Depot to purchase a Rheem...Im done with Whirlpool!

Bought a whirlpool refrigerator in 2015, have had both handles replaced 3 times, the bottom pieces of the handles are made of plastic and they crack. We had to take them to a metal fabricator and have them replaced with metal to keep them from breaking. Lowes and whirlpool know of this problem and they do nothing about it. Will not buy another whirlpool product. Very dissatisfied.

You cannot control anything on this machine. You cannot pre-fill to dilute detergent- you cannot choose temp because what you choose is changed by the machine (manual). You cannot choose your own combinations of temp, water volume, and timing. Once the ** thing starts you cant change anything, like the setting you wish to use. Do NOT BELIEVE THIS IS ENERGY EFFICIENT. There is a REASON that this machine has a 2nd rinse. It is because so little water is used that it does not allow soap, lint or dirt to have anywhere to go but back into your clothes. YOU have to trick it out to get enough water to actually get some loads truly wet. EVER! You stand there like an idiot opening and closing the lid just to get enough water to dilute the detergent. You cant pre fill and then add your detergent because, it needs to sense your clothes load. Wont fill with the lid open. You cant rinse the detergent cup out. You only get to do what Whirlpool already knows about your needs. Oh & lets not forget the spin cycle. When you open the lid, large items like sheets will look like a pancake made from one of the sheets. However underneath will be a tangle of the rest of your wash worthy of a Gordian knot. You can yank your shoulders out trying to dislodge the clothes. Spin yes, I guess it did, I just didnt need permanent press wrinkles. And thats if you CAN actually open the lid. For some idiopathic reason the lid may be on lock. Good luck with that. Most often, youll find no reason that you can discern like an unbalanced load or as the booklet suggests, you havent figured out how to load a machine. I hate the design of this so much that I called the company and they said that they would send a repair man out to see if its working. Whats he going to do? Run a couple of washes and say hey thats how they design these things? They will not replace it. They do not stand behind their products. You are stuck with bad design period.Describe Yourself: Frequent User. Service/Delivery: It came with a big dent in the dryer we bought with it. Installer dudes crossed the hot with the cold. Whirlpool will not stand behind the products they make & they make lots of the brand names. So they figure they can just do exactly what they want and youre screwed because even under warranty, theyll only fix the mess of engineering they designed in the first place. Bottom Line: No, I would not recommend this to a friend.

Purchased this beautiful sleek Cabrio washer in May 2012 from Appliance Smart, with its modern looking glass top, it looked so nice. The washer itself works ok for now, but it does unbalance a lot, thats not main issue. We deal with that. The poor design of holding that sleek glass top in is the problem. After a little over two years, it started cracking at the hinge that is just mounted in Plastic which holds the whole lid down, including the heavy glass. The glass started raising up, causing steam to escape. The lid is rubbing and very difficult to open. Appliance Smart is gone now.. We called the service repair person about 6 months ago, he looked at it, said its a problem that is not covered on our warranty and it would be approx $350.00 to repair!! So today, tomorrow or next week it will stop working because the lid is popping off! Its a terrible design, dont be fooled by its sleek look. The manufacturer takes no responsibility for this major design flaw. Beware, the very thing you need to be fixed wont be covered under warranty, lemon law, or just good customer service. We have owned several Whirlpool appliances and doubt that we will own one again, due to the way this issue was handled by Whirlpool.

Top loading Washing Machine Model #WTW4950XW2 - You would think that a big company like Whirlpool would make quality washers. NOT! Our top loading washer bought in late 2011 has been making loud noise during the washing cycle for the last 6 months, and last night was struggling to spin. Seriously, with just my wife and myself using the washer once a week, this washer should last over a decade! So I called Whirlpool and explained the problem... and, as expected, they cannot help me as it is over the one year warranty. NO MORE WHIRLPOOL BRANDS FOR US!

Reliability. I have bought Whirlpool used and new and they have been the best washers that last so much longer than other brands. They also have more than enough settings to truly take care of everything in your home that can be washed.

Do not ever buy a Whirlpool refrigerator. Sloppy construction, bins dont close, doors dont seal well and a brand new fridge doesnt cool to a safe food zone. When we call for service, I got the run around for almost 2 hours. They wont be sending anyone to service a brand new unit for an entire week... And thats 2 days before Thanksgiving! I have never had an appliance made this poorly. We dont have the space for a bigger unit, so thats why we bought this model. Size shouldnt impact quality!

The trim on the front the my Whirlpool electric range has rubbed off. This is where the knobs for the burners are located. It was replaced once during the Whirlpool 1 year warranty (so it obviously happened with the first year!) and again during the second year we have had it. We have an extended warranty but have been told that it is not covered. It is ecstatically unacceptable. We have not used any type of harsh cleansers on it - simply a sponge to remove any spills yet it keeps on disappearing. I strongly recommend against buying any range from Whirlpool as it is quite obvious that they do not stand behind their products beyond the first year.

When out of town power lost, fridge did not start back up... Everything lost in fridge! If you do not lock it will not restart on power on! I found this out on my own. Not even mentioned when I called cust. service. They were stuck on telling me act of God --- not covered! Would never purchase again!

Worst washing machine ever, I should’ve kept my 12-year-old washer that leaked, it worked better and actually washed my clothes... This washer, the Cabrio 5.3 leaves clothes DIRTY, can’t use fabric softener because it doesn’t wash it out even with the extra rinse and deep water wash, leaves white ** on everything!!! I have to wash everything TWICE! I hate this washer! I hate Whirlpool! Piece of **, I want my money back or I want a different washer that actually works as it should! Wasted money on this piece of **! BUYER BEWARE. DO NOT BUY!!! Bought from Best Buy and boy did they sell it to me, told me it was the best washer out and will save me money! SMH.

My wife and I purchased a new Whirlpool gas range (Model#WEG745H0FS0) almost 2 years ago. Woke up one night to the smell of heat and the oven had come on! Thank God we were home. Very dangerous! Repair is going to be expensive! Havent used the oven portion in about 3 months now. And Thanksgiving is just around the corner! Any assistance is greatly appreciated.

We purchased the Cabrio Washer and Dryer from Lowes during a Black Friday sale, November 2016. The items were delivered when we closed on a new home. Thus, we didnt start using the washer and dryer until 3 months after purchase. One month after usage we had our first service call. To the point, what the other reviews say are the exact experience that we are having. Unfortunately, we did not do our research before buying. The washer: Clothes come out wrinkled, littered with lint, and the wash cycles are excessively long. The dryer: Clothes take a long time to dry, and most times we run the dry cycle twice because, after the first cycle, the clothes are still damp.Even though the washer and dryer can accommodate larger loads, we are forced to break out the laundry into smaller loads to get better results. Still, doing the laundry is negative experience with the Cabrio. Recently, it took nine hours to fully complete 5 loads of wash. That included the dryer cycle. The repairman said that he is well familiar with the issue. It is the new technology. The software is incredibly sensitive and can fault easily. This leads to another negative feature. The software is restrictive leaving the user with little control over how they want the wash and dry cycles to perform.Going back to the conversation we had with the repairman. He said he had a Whirlpool washer and dryer at home that was over 10 years old. The old fashion kind with the dials and less complicated technology; and he has never had an issue. I have to agree with that. Our second home has the Whirlpool Duet (washer and dryer) that are 13 years old. Never had a problem technically and with washing and drying clothing. We plan to try to contact Whirlpool about their return policy. Not a quality product. Definitely cannot recommend this washer and dryer. We truly purchased junk.

I purchased a new high-efficiency front load Duet HT Whirlpool washing machine (WFW9200SQ02) in January of 2008 for nearly $1000. I dealt with the mold issues and permeating smell for all these years, but the machine failed catastrophically this month - after just over 3 years - on a $1000 machine! The rear bearing went out. The parts alone are nearly $500 and the labor is estimated to take 3-4 hours by a trained technician. We are talking about an $800 repair --more than a new machine would cost. The most disconcerting part is to see how often this is happening. It is commonplace. The bearings go out on these things, sometimes after only a year or two, sometimes after 3 or 4; but it is very rare to have any machine go longer than 6-7 years. Whirlpool wont do anything. The best chance is forcing a recall related to the class action lawsuits pending about the mold issues, but by that time, how many people will still have their machines?

My KitchenAid side by side refrigerator/freezer is a beautiful thing, shiny steel surface, gleaming white inside. However, its made poorly. The ice cube maker compartment broke and the replacement came without any installation instructions. It was hard to figure out and I broke it. Now, everything in the refrigerator is freezing and changing the temperature on the digital panel makes no difference. McKinneys appliance, where I bought it, no longer has a refrigeration technician and they referred me to Whirlpools 1-800 number where I supplied some information and sat in my chair on hold listening to music for a half hour before hanging up.The recording on the phone suggested their online chat where I was asked the same sorts of questions and was told I would get the answers I wanted by paying $5.00. I had no idea what I was getting into but I didnt pay, just terminated that inquiry. Feeling cheated by the company whose product I had mistakenly purchased. Im now running the risk of a technician visit, sometime between 8 am and 4 pm a couple of days from now. I have to be prepared to wait around all day for somebody to look at my refrigerator, charge me a lot of money and, from what Ive read online, potentially see the problem return in a very short space of time.

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

We purchased our suite of appliances from Home Depot, this was a great experience. Unfortunately that is were it stopped. Our 1st refrigerator caught on fire in the electrical within the unit. We got a 2nd refrigerator sent to us and it came damaged. Then they sent us a 3rd refrigerator and it caught on fire in the electrical as well. Weve been dealing with this all since August 27th 2019 and here its now October 14th 2019. At this point I feel this model of Whirlpool is truly unsafe.

We moved into our house about 5 years ago. We didnt know how old the heater was so 2 years after moving in, we replaced it with a Whirlpool Electric Water Heater. (2009) Last August, (2 1/2 years after installation) we found our carpet soaked in the room adjacent to the water heater and discovered it had been leaking into my finished basement for who knows how long. We contacted Whirlpool and they said they would replace the heater but I had to pay for the install because it was over a year. Mind you I had just paid 300 bucks 2 1/2 years before to put that one in. So I paid another 300 bucks to have a plumber come out and install this one. I had extensive damage to my basement, rug, walls with mildew and possible mold from the water. I went through my homeowners insurance and had almost $5000.00 worth of damage.So about a week ago my husband calls me downstairs and guess what, my brand new rug that I had replaced 11 months ago due to a leaking Whirlpool Water Heater was soaked again. This heater, 11 months old, leaked yet again!!! Needless to say Im beside myself, especially when I call Whirlpool and they will replace it, again, but who the hell wants to have damage to their finished basement every year??? When I called and asked them to pay for the damage this time because I cant possibly put another claim in with my insurance in less than a year for the same thing, they just say that they will have the labor charges dismissed as a courtesy. As a courtesy??? I said its been less than a year so they owe me the labor charges; she said no that it goes by the original warranty from 2009. What??? Thats utterly ridiculous and how is it possible that they can get away with this. That has to be against some state statue or law, to use the previous warranty on a defective product. So now Im left with about $2000.00 worth of damages this time to my brand new refinished basement all at the hands of Whirlpool. I had to get another one of their heaters because they wouldnt even give me the money for the heater so I could buy a different kind. I will NEVER buy a Whirlpool product again and Id advise to anyone who will listen to spend a little extra to avoid this hassle!

AquaLift Self-cleaning does not do the job as advertised. It does very little to clean the oven. Sitting-on-the-floor-in-front-of-the-oven scrubbing is what is needed to clean the oven.

I purchased a Gold Star Whirlpool Refrigerator from Sears which was installed on July 1, 2010. The freezer was icing up along seams, so sealant was used. However, now I noticed after 14 months that the interior refrigerators lining is fracturing throughout the sides and bottom of the refrigerator. Not at seams but all over fractures, spanning 10 to 3 to 2 on the bottom and side of the interior lining of the refrigerator.Sears answer is more sealant, and Whirlpool does not take any responsibility in designing a defective liner since it is pass the one year time frame. This causes your refrigerator to be on more often, because of the cracks. Unfortunately, the consumer loses out. Both representatives were nasty and when I asked for a supervisor from Whirlpool, an incident report was written, however I will not ever be able to get a copy of it. It will be considered an internal document. It is a great setup between Whirlpool and Sears having defective appliances made to last a year, and Sears to win with warranty agreements for the life of your appliance of $250, for one year coverage. When you buy the warranty and have a lemon, Sears doesnt replace it, My suggestion to consumers is to buy a tube of sealant.

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

Whirlpool Gold French Door - I purchased this fridge in Aug. 2009 (model GX2FHDXVQ00 22cu. ft. French door with bottom freezer). Paid 1800.00. The fridge stopped working after 5 years, but the freezer works fine. A fridge should last at least 10 years. I wont buy another Whirlpool appliance! JUNK!

I feel that at the end of the day I do owe Whirlpool a good feedback. Our top load washer stopped rinsing so I checked the clutch, agitator dogs and coupler which all looked brand new. So I thought Id take the trans apart and after pulling the plastic agitator out I noticed the tub had completely rusted in half! The tub dropped down about an inch. The agitator would spin but the tub just sat there. Now came the difficult part. I told them I was quite sure about my diagnostic that it needed a new tub and told them I could send them a video (I even posted a video on Facebook and Twitter). But they said they would have to send a man out at $180 to make sure! After several days of back and forth conversations, someone at Whirlpool finally saw the video and agreed to send us a new tub. I havent gotten it yet but have heard through the grapevine that these tubs were supposed to be replaced if rusted because of the quality of metal used? So other than pulling a few teeth and needing to replace the tub, our washer has been a pretty good machine.

This Whirlpool washing machine is over 5 years old and very reliable, I use it several times a week and have had no problems with it. Next time I will purchase a larger capacity machine so I can wash comforters and spreads easier.

I purchased the Whirlpool Cabrio about five years ago. Last year, the motherboard had to be replaced. This year, it started load balance issues on the spin cycle; in other words, it wont spin without sounding like its going to tear itself apart. It cost $100 to have someone look at it, and was going to cost almost $400 to repair, and whats next? I spent a lot of money for this machine, and Whirlpools answer was to offer me a discount to purchase a new Whirlpool. Do I have Stupid tattooed on my forehead? I will never buy a Whirlpool again!!!

Very unhappy all the way around with Whirlpool. The first refrigerator shipped had to be replaced, I do not remember the original problem, just the ordeal involved. The replacement had to have the computer board replaced twice, the icemaker stopped working after a few months, the freezer door does not seal properly. And now, after less than 3 years, the drain is clogged. After researching, come to find out this is a common problem and has resulted in many water damaged wood floors, including my own. Never Whirlpool again. There are much better brands on the market today with better price points. I highly recommend staying away from Whirlpool.

Ive bought a new home and I purchased a brand new Whirlpool black oven range. First, a piece of metallic on top of the oven broke. I couldnt believe it. And the biggest problem is that whatever I do to clean the top surface, it always leaves a stain. After a few months, the oven looked like 10 years old piece. I called whirlpool and talked to a customer service rep, he told me that I needed to clean the surface immediately after something spill on it. To make sure if I understood it right, I asked him You mean when I am cooking some rice and some water spill out, do I have to remove the pot and clean the surface and repeat that all along while I am cooking? BELIEVE OR NOT, THE ANSWER WAS yes. I cant believe the bad quality of this product and worst, its customer service defensive attitude. Dont buy this product.

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

We purchased our oven from Sears, and less than two years later, the oven would not cook a chicken. We do not use the oven very often. We grill out and use the top burners often. We had the oven repaired through our home warranty program, and now 8 months later, it seems to be occurring again.

My whirlpool duet was extremely quiet the first few times I used it and seemed to work well. Then I noticed that it randomly drained the clothes but didnt spin them, it did it on different cycles, and I would have to run the load again on spin and drain, another 19 minutes of run time. After a week it began to make metal scrapping sounds on the spin cycle and vibrated to the point that it moved the pictures on my walls. I called Whirlpool customer service and they authorized a service call. In short, the service man was very confrontational told me there was nothing wrong and charged me $72. It still vibrates and randomly doesnt spin. But now after he took it apart it sounds like a jet engine when it does spin. Whirlpoolss response after repeated calls? Not a new machine, but another service call......

My mother-in-law purchased a Whirlpool refrigerator in 7/2010. It broke down the first time in August then consistently after that. We have had repair people out multiple times and the issue continues. I called Whirlpool and they said since it was purchased more than a year ago, it is not their problem. You would think that in all that time they would have found a way to repair or replace it. To make matters worse, we have had to call hospice in to care for my mother-in-law, all she wants is to get ice and water out of the door.

My husband and I purchased a Whirlpool over the range microwave in 2005, model number MIX155XHPT-1 and serial number TR S 30 32419. At first the top vent broke then the opening side broke off. Then the whole side of the closing door broke off. Now the whole door wants to fall off. I would have never expected this from Whirlpool, but it happened.

I bought my Whirlpool dishwasher, model #WDF560SAFMO in Nov 2016 with a 2 year extended warranty. In Jan. 2021 it quit working, was told by repairman that the dishwasher needed a new pump. Of course, it is no longer under warranty. To replace the pump will cost almost as much as a new dishwasher.

We purchased a Whirlpool Gold Dishwasher about 8 months ago. Immediately called for service as dishes did not clean after running over 3 hrs. Was told it is operating as designed. I followed all the tips and it still continues to not clean. Plastic wear and cups stay wet, plates arent clean. We have changed detergents pods as well. We may junk it and buy something else. Recently purchased clothes washer and did not buy Whirlpool. Very, very disappointed. I should have kept my 12 yr. old GE Dishwasher that wasted water... But cleaned my dishes. Not happy with Whirlpool!

I bought a commercial coin operator washer (Whirlpool washer model CAE2743BQ) for $800 and after using it for 4 months the washer stop working. The main board panel lights turned all and the washer did not start. Called Whirlpool several times and nobody could help me and told me to look online for a distribution center to get parts. The customer service only knew about regular washers not coin operator. The washer had only 3 months warranty from Home Depot and I was supposed to pay for all the repairs and Whirlpool would pay for parts. So far I spend $400 in repairs and the certified technicians could not repair the washer. They replaced the actuator shift, the main board etc, etc and nothing. The technicians reset the washer at least 10 times, calling Whirlpool tech support and the washer worked for one load and the main board lights stayed on all over again, the start button did not work. I sent a letter to the warranty department that I got online and they told me to call the same 1800 that I had called at least 50 times in the past year. Now it has been more than one year and the machine is defective. Technician said could be the soap that my tenants are using, or overloading the washer or an electric problem that they cannot identify. I gave up... I will not buy a coin operator heavy duty washer from them again. I requested a return authorization for a defective product and I did not get anywhere. Thanks.

I have been extremely dissatisfied with the Whirlpool Cabrio washing machine!!! I tried to take it back and Lowes would not let me return it because I had had it for 6 months. It doesnt put enough water in the machine to get all of the clothes wet. It doesnt get the clothes clean and it leaves some kind of lint residue all over dark clothes. I am only able to put in 1/4 of the clothes I put in my Maytag washer which I loved, but it wore out. I am also short and it is so deep I have to use a stool to get up on to reach into so i can reach the bottom of the machine. Even though it is a huge tub, I can only put a few pieces of clothes in it to get it to clean the clothes. It is a very poor design and needs to be recalled!

Whirlpool Cabrio Washer - Sucks. I purchased it when I purchased my house. After having the washer for a year and a half it stopped draining and wouldnt spin. I paid $75.00 for the service call from my home warranty and thought that I was good to go for a while. But here I am a year with the same problem. I will never buy another Whirlpool again.

We purchased our Whirlpool refrigerator Model # WRT138TFYW on March 2012. We first started noticing that the eggs and the milk started to get icy. We lowered the setting from the normal setting to the lower setting. This seemed to work for about 5 months then things started to get icy again and this time it started making a loud noise. Then in August, we called Whirlpool, told them what it was doing as it was still under warranty. They sent out A&E, the biggest crooks I have ever dealt with as well as rude people. The service guy said it was probably the Frost board. He ordered the part and put it in. Afterwards, we asked him why it was still making such a ruckus. He told us this was normal. Now we arent a professional and dont know about Appliances so we took the technician for his word. Then this past December, the refrigerator wasnt cooling as good. The next day we noticed that things in the freezer wasnt freezing either. We called Whirlpool, told them what was going on and that they needed to get someone to fix it. This was when we found out that the refrigerator only has a one year warranty. I got them to agree to pay for parts and labor after getting down to the fact that this problem went back to the very first time while it was still under warranty. They sent out A&E Factory Service, again the biggest crooks there is. They checked the refrigerator and told us that the compressor and evaporator was bad. They ordered the parts and that was the last we saw of them. We got Whirlpool to send someone else. Now up to this point, I have to give them credit because they have been really nice. Then when the other technician from Americus Appliance (Very good guy, would recommend to everyone) asked why both parts were ordered, we told him that the technician from A&E said it needed them. He then installed the Compressor and told us that there was nothing wrong with the Evaporator that he could tell. He then filled it with Refrigerant and the freezer was getting very cold. Then about an hour I went to check to see if the refrigerator part was getting cold and it wasnt. I checked the freezer at this time and noticed that the freezer was getting warmer. We then called the service guy and he checked the refrigerator. This was when he told us that there was a leak in the wall of the unit and it couldnt be fixed. We called Whirlpool and told them what the technician said and asked them what they were going to do. They then said they would send everything to the exchange team and go from there. Now we are waiting to see if they will replace the refrigerator. Personally after having to replace a Brand New Washer a year and 2 months after the purchase and possibly now a refrigerator that is less than 2 years old. Buyer Beware. Check out the warranty on a GE. They have a better warranty on their refrigerators than Whirlpool does.

We purchased this Whirlpool Cabrio washing machine from Sears about four, maybe five years ago and have complained repeatedly. We have had repairmen out numerous times. Of course, they have had to order parts. My clothes are not getting clean and they now have an odor to them. The machine is getting noisier and noisier and it is rocking like crazy (I had to put plyboard underneath to protect the floor) during the rinse cycle. The water sprays out erratically and sprays even slower for cold water, then warm water, which was weird! Thankfully, I still have it under warranty (I got the extended warranty). I am now getting ready to call them again. I will never buy this brand again.

I purchased a Whirlpool refrigerator in Aug 2012 model G16FARXXF05 and in July 2016 the compressor died. I researched refrigerators before purchasing and was told by every store I visited that Whirlpool was probably the best and with the least problems. Unfortunately, for me that was not the case. I guess anyone can get a lemon!!!

My new ACCU-BAKE oven was not baking properly. Always uneven results. Finally called for service, just in time before the warranty expired. The service rep informed me that I had not bought a convection oven. Well, duh! Of course, I knew that! He tested the temperature levels inside the oven and found a variance of 10 degrees Celsius, which he reported by phone to the company. He advised me to reach into the oven half-way through any baking process to turn my cake around, and it would bake evenly. I asked him if he had ever tried that himself. No, he said, he was not a baker. That was the end of the service call. No follow-up, no service. Today I learned that the company actually has this exchange in its records, but if I want to get the oven to work properly Ill have to pay for service, as the warranty has expired. I wonder what would happen if I ever tried the self-clean or Sabbath mode features on this oven.

Pilot light will not lit. I called Whirlpool. They said they could ship me a replacement for $34 or I could go to Lowes and get one for free. Lowes said they were out of type C kits and they have not received replacement kits for 6 months. Lowes informed me about the recall for this part. If its a defective part, Whirlpool should be sending this to me for free. I will not be buying a Whirlpool water heater next time.

I purchased a house with Whirlpool products installed. The refrigerator wasnt too cold but working for the first 2 months. Then the ice maker stopped working, the freezer stopped working and now nothing works. I have been through 4 service calls, I repaired that took almost 2 hours and the refrigerator is still not working. I have spoken with numerous Whirlpool representatives and they were like robots with respect to their response. There is a chain that they adhere to and once you have spoken to an executive at their corporate office, no one else can help you. Now I am trying to reach that executive and there hasnt been a response. I havent been able to have food in my refrigerator for over 3 weeks and counting. Imagine, eating out for breakfast, lunch and dinner for this length of time. Christmas - no refrigerator, New Year - no refrigerator. A consumer who makes a purchase in good faith should not be put to this kind of agony while trying to remedy the situation. I dont know what happened to their customer service but it is nil. From my own personal experience and in my opinion, Whirlpool is not a company that cares about their customers, just their profits. I am at a loss . What are my options as a consumer?

We purchased a Cabrio washer in August 2013, in early August 2014 we noticed that it was not getting all of the detergent out of the clothes (noticed it on the dark clothes after drying). We use less than the recommended amount of HE detergent and dilute it in the dispenser, also always use the extra rinse. We just had a Sears service man out at a $100 cost only to find out that he gets these calls all of the time and the machine is operating at the factory settings.After reporting the problem to Whirlpool all I got was we are sorry and a link to how to operate the washer. In the demonstration video it clearly shows that the water level never covers the clothes. I know Im old school but in my opinion the water should cover the clothes so it can properly wet and agitate the items in the washer. To say I am less than satisfied is a gross understatement. Im out the cost of the washer plus an additional $100 and after a year of ownership and contacting Whirlpool less than a week after the factory warranty ran out all I get is an Im sorry you do not know how to operate a washer.

My 3 year old Whirlpool dishwasher (model GU3200XTXY3), broke down for the third time. Under extended warranty with my insurance company, a repair tech was sent out to diagnose the problem. He quickly found that the heater had been continuously running (not just during drying), which caused the machine to quit working. He also found that all the wiring inside the dishwasher was spliced together, those two things=fire hazard! Because the heater was always running, it was super heating all the water used to clean the dishes. The vent to release the steam is located on the top of the door (right under counter edge). The dishwasher was producing hotter and more steam which slowly ate away at the particle board under the cabinets. No, we dont have the most expensive countertops, but Whirlpool should be held responsible for producing a faulty product with a faulty design. I have contacted Whirlpool and they claim to have mailed a claim form 3 weeks ago. I have not received it. Posted on social media about it, and was told I must only speak with the person who sent me the form. I would love to, but since I havent actually received any contact from anyone (other than a fb post) I dont know who to contact, at what number, or email!

We have had a Whirlpool hot water heater for 6 years and 14 days. Note the 14 days. It has been nothing but trouble and we have called the company repeatedly for help. It finally stopped working altogether 14 days after the warranty ran out. Thank you Whirlpool for nothing! It had a filter on the bottom of the heater that constantly had to be cleaned which was next to impossible. We had to buy a special brush to try to reach it. My husband had to take it apart several times a year and clean it to keep it running. Whirlpool should have replaced it within the first year but instead offered many suggestions about cleaning and etc. so they would not have to replace. Today it is out of my house for good and I would advise anyone reading this to beware! Horrible product!!!

Whirlpool Duet WFW94HEAW0 Washer - Bought the machine in Feb 2014 and was generally very pleased with it. However a few weeks ago we started getting oil/grease stains on clothing. Wasnt sure what was causing it but it has now got so bad that the machine cant be used. An internet search indicates it is possibly a ball racer ring and doesnt sound an uncommon issue. A call to Whirlpool resulted in a quote for circa $350 for a service call. Thats a 1/3rd of the original value (includes a 12 month warranty). And its just over a year old!!! We had a problem with the Maytag Neptune that ended in a class action suit and now this replacement machine seems to be even worse. I would recommend anyone to really consider what to buy and give this range a miss.

Purchased new home with Whirlpool appliances installed Aug 21/17. Six months ago, I noticed that when I opened the door to the microwave over my range, the light flickered. A few months ago, intermittently, stopped working, now, not working. After reading the reviews, I am having the same problems other consumers are having. DEFECTIVE PRODUCTS! DONT BUY!

The Whirlpool microwave stopped working 14 months after purchase. The technician, who was a complete moron, said that he couldn’t find the problem, but took 129 dollars in service fee, which was extortion. Their appliances are ** and so are the ramrods that they hire to service them.

My wife and I bought a Whirlpool Cabrio washer and dryer set in 2011 and now the washer has an error code of F7 E5. I spoke with an appliance guy and he says that it is going to cost up to $450 to repair it. The wash cycle does nothing, it just sits there and then it goes to the next cycle. I have grown up in a household that had washing machines that lasted many years. This is a joke. Why am I having to buy a new washer in 3 years? I dont understand. Whirlpool knows that this is a problem and they should step up and do a recall or some kind of discount towards a new machine. This is ridiculous.

We purchased a high end KitchenAid Refrigerator Dec 2018. Rust developed on water dispenser door in less than year. They would not honor warranty. Since March we have had ongoing cooling problems with 5 service calls and 4 different fixes and unit still doesnt work. Local authorized service company, Fields, in Jacksonville FL is incompetent. Whirlpool doesnt return calls. The products value is not consistent with the high cost. Here are the gory details. Ref: Setzers, Jacksonville FL (sold unit). Fields Jacksonville FL (factory authorized service company).Less than 1 year in, it began to rust. We called for a Warranty check. Fields Appliance (their factory authorized service company) came out and agreed all 5 doors needed to be replaced. A month rocked on, finally we called to find out where the doors were, and were told Whirlpool (Makers of Kitchenaid) denied the claim. Citing that we lived near the coast! Well, our other appliances arent rusting and the refrigerator doesnt sit outside! They sent us a 6 oz bottle of rust cleaner. A few months later, this refrigerator stops cooling! This was in March, 3 months out of 1 yr warranty. The refrigerant system is warranted for 5 yrs. This was also right at the beginning of Covid 19 shutdown. Fields could not give us a appointment, due to shutdowns. So, I called a local company to fix it out of pocket. He discovered a leak in the coolant lines, fixed the leak and replaced the coolant ($453.61 on 4/9/20). Great, it works! About 3 weeks later, it stops cooling again. Called local service repairman out once more to see whats going on. He replaces a thermal bi metal sensor and well ahh! It works again ($100 on 4/28/2020).About 3 weeks after that, it stops working again! We are thinking by now, its a problem for Setzers, Whirlpool, and Fields. We call the local service repairman out to confirm and he states that the evaporator fan motor will need to be replaced, and that part replaces all sensors as well ($59.99 5/28/2020 service call). We call Setzers and schedule an appointment with Fields. First appointment we could get was 6/16/2020. Guy comes out, and cited a factory defect, per a technical bulletin he had, and relocated a sensor. Simple as that, he assured us it was fixed! Even though I pointed out it felt no cooler when he packed his things to leave. It did nothing! In the background Setzers (when they would call back) were supposedly working with Whirlpool to help fix the problem! Whirlpools reply was that since our repairman was not factory authorized, it completely voided our warranty! Explaining we had no choice, since Fields wouldnt come out and by now we are without a working refrigerator for 3 months, they could care less! Feeling totally frustrated, we call Fields again! On 6/19/2020, they send out another repairman. This guy came in, opened up the back, and immediately stated the refrigerant was overfilled. Didnt do any diagnostics, just told us that we were **, and walked away, without even putting the refrigerator back in place! Neither Fields rep hooked up a diagnostic tool to confirm any real issue, I guess they just knew! Total incompetence! So... As of now we have paid the local repairman ($448.33 on 6/26/2020) to order the evaporation fan motor and install it this coming Monday (7/20/2020). Total amount out of pocket at this point, $1053.90. It took that long to get here! Wish us luck! Setzers wiped their hands clean of the issue and told us to call Whirlpool. We did have not ever received callback.

We bought my Whirlpool top loading washer and dryer back in 2005, and they have not disappointed. Apart from needing a heating element replaced due to poor ventilation one time, both machines are extremely dependable and wash our clothes quite clean!

My dishwasher quit drying and washing in hot water at Thanksgiving 2021. I could not get someone to look at it because the repair company (for Whirlpool) could not get to it until January 2022. The repair tech said it was it could be three different things. He was going to order all three parts. Three weeks later, they came to repair it. It still didn’t work and I hate to wait two different days (all day) for service. First day, he didn’t make it so had to schedule for next week. He replaced the other two parts. It now works by still doesn’t dry like it should. Not thrilled with performance at all!

Our Whirlpool Cabrio Washer is barely over one year old, and its getting increasingly louder (I cant hear the TV in the other room). I researched this issue and found this is a common problem with the upper and lower bearings. Check it out on YouTube; its easy to find. Whirlpool should buy these back! Is anyone aware of a class action lawsuit against Whirlpool regarding these pieces of junk?

We purchased a Whirlpool Cabrio, top load washing machine WTW6600SW back in 11/07. Last week (todays date is 8/19/11), the machine sounded like a plane taking off when it spins out. When the local service technician came out this week, he said that the bearings are shot. Since the tub and bearings are all one part, we were told by the technician that the part and labor costs would be $379.99 to repair it. We originally paid $799.00 for the Cabrio, less than four years ago. Whirlpool would not even give us a concession of a new tub and bearing part as it was out of the 1 year warranty.

My old Whirlpool stopped working so I purchased a new one 2 weeks ago. I have had 3 items ruined since using this machine. It is leaving blotchy spots on the clothes and they will not come out. I do not use bleach but the spots look like bleached spots or stains. After reading other reviews I would like to know what the manufacturers are going to do. It is not very economical if we have to rewash everything or replace clothes the new washers are ruining. I have just spent hundreds of dollars for something that does not do its job and would like to know what the solution is. Is there a model washing Machine out there that still cleans clothes? Since mine is only 2 weeks old can I trade it in (Lowes)?

Whirlpool WRF 990SLAM00 - Im 62, I have owned, and my family has owned a number of refrigerators and never have had any problems. I have been used to my refrigerators and major appliances lasting 15 plus years without any problems. I mostly bought Maytag washers and GE kitchen appliances. I had trouble with a GE dishwasher, out of warranty, but GE was very nice about it and came out and fixed it at no charge, then replaced it for free when it failed again. (No new problems in 4 yrs.). Then I made the big mistake of going with Whirlpool products in my new house in Florida, where I live half the year. What a mistake. First there was the Cabrio washer. After 1 yr and a week, It would not go to the spin cycle. I called Whirlpool, they said, Sorry, out of warranty. I told them, I only live in this place for half the year, so I have hardly used the machine. The Whirlpool person said, Sorry out of warranty. I asked for a supervisor and they were worse than the first person. The attitude was screw you, you should have bought the extended warranty. I called a repairman who fixed it for 150 dollars. During the spin cycle it gets really loud, but at least it works. Then the refrigerator. I arrived back in FL and the 1.5 year old refrigerator was not cooling. I called Whirlpool and said I needed a repairman. They said, Out of warranty, you can buy an extended warranty for 345 dollars. I said, No, a refrigerator should not fail at 1.5 years, send a repair man. He was great, but said the unit had a Freon leak somewhere in the box that was un-repairable. He told me, You need a new refrigerator. I will now call Whirlpool and see what they will do for me, but I expect little based on my experience with the washer, and others comments above. I will go back to all GE products after this as at least they seem to stand behind their products. Oh, and since Whirlpool now owns Maytag, as Whirlpool owns them now. Sad.

The door handle is cracking on my Whirlpool microwave. This is a poor experience with Sears. My original door was smoked up from a kitchen fire. I replaced the door and handle in June. My boyfriend does all the cooking, so I did not notice the handle until November. It is cracking on the side. We contacted Sears, and they said it was past the warranty. This problem is due to a defective product. I have seen several similar complaints online.

Our slide in range had a burned out element. After waiting a week for the part the range still did not heat. The real problem was the control panel at a cost of $300 plus labor. We were so discussed with the problem we purchased a different brand range. Who should be purchasing a new range after 18 months???? Cost of service call twice, part cost of element, and new range all total another $600.00. Do not purchase this product!!!

After getting a suite of Whirlpool appliances from Home Depot, I found that they were a little below standard to previous Whirlpool we’ve owned. I found the top of the Electric stove could be easily scratched and the refrigerator was noisy. The stainless steel seemed not as heavy as our other ones. The Whirlpool insignia on the refrigerator came lose and I needed to glue it back on. I’ve always had good luck with Whirlpool and we’ll see how this goes. Just to be safe we bought an extended warranty on the fridge.

My 5-year-old Cabrio started coming up with error codes, and not draining and spinning the clothes. I called a week ago, they offered me 2 options, one being put $339 on a credit card and that would cover all parts, labor, and a 1 year extended warranty. They charged the credit card immediately for the biggest piece of crap washing machine. Someone came out 2 days later and told me he has worked on a lot of Cabrios but never one in quite that condition. I was led to believe that after charging the credit card, boxes would be arriving with parts to fix it. I called 2 days later to find out the status of when it would be repaired and they told me they already put a credit thru on the credit card because to fix it would be equal to the price of 2 brand new washing machines, and they will do nothing to honor that agreement. So I now have a piece of ** in my laundry room and takes me two days to do a load of laundry. DO NOT BUY THE CABRIO! In fact Im not going with a Whirlpool ever again!

Bought Whirlpool Gold 21.9 bottom freezer (stainless) Jan. 2013. When it was 19 mo. old I noticed the freezer door was pitting. I have the Lowes protection plan. Not their problem, door is a accessory not a part. Whirlpool said no quality issues with the material. Very disappointed Whirlpool did not stand behind a product they sell. From past posts I am glad we did not hook up the ice maker.

We purchased a Whirlpool French Door Refrigerator WRF989SDAHOO less than two years ago. The refrigerator runs constantly and has gotten louder by the day. It is so loud you can hear it when you are in another room. The temperature on the refrigerator is too cold and freezes fruit when I put it in. I contact Whirlpool online and they said it seems fine to them and also there is no temperature control that I can change myself. I am afraid I am going to come home one day to a dead refrigerator and spoiled food. I was not happy with their response and I WOULD NOT PURCHASE this again. The other problem is, we bought as a set, matching stove, refrigerator, microwave and dishwasher. So if I have to get a new fridge it wont match.

We purchased a Whirlpool Duet machine in September 2010. About a year ago, I started noticing tears and stains on clothing. Luckily, it was always on a washcloth or blanket, nothing special. Last week, it tore a 3-inch hole in my good jacket. I was not happy! My husband and I checked inside the drum and all around the seal. Neither of us found any rough edges. I thought if I called Whirlpool, they might have had a recall. They assured they had never heard of this problem. REALLY!!! Just look at all these e-mail complaints. Back to the old top loading - basic wash machine. Definitely not a Whirlpool!!!

I purchased Whirlpool french door refrigerator wrf535smbm00 at the beginning of this year and it has really made my house an unpleasant place to be. My main complaint is that it is very, very loud, and seems to vibrate through the whole house. It runs most of the time at a level of 60 dB, which might be considered a low noise level for a mechanical appliance that runs occasionally like a dishwasher, but is quite loud for an appliance that, according to their own specs, runs at least 40% of the time. Nobody wants to notice their refrigerator. They just want it to work.Which brings me to my second complaint, the temperature control is all over the place, generally ranging from 25-50 F. I find it difficult to believe that the government, which always seems overly concerned about the temperature of restaurant food, or the pasteurization of cheeses doesnt care that an appliance nearly every American household has doesnt necessarily do its job, and isnt required to display internal temperature. The old-fashioned set this dial to an arbitrary number and hope its cool enough is not charming.Finally, though the finish is listed as stainless steel, mine started sporting tiny rust spots after only three months. Whirlpool states that Cosmetic issues are covered by the manufacturers warranty for the first 30 days of ownership only. After the first 30 days any repairs for cosmetic issues are the consumers responsibility. It seems as though they know theyve used a low grade of stainless steel.

Whirlpool, shame on you! I purchased my Whirlpool Cabrio pair from Best Buy in 2008. Ive had repair technician after repair technician out over 7 times! The washing machine must have been designed by a 3-year-old! Whirlpool, youre getting greedy and youre making your products CHEAP! I know this is fact, I have a 15-year-old side by side in my garage made by Whirlpool and it works great! Fire your 3-year-old designer! I will NEVER buy Whirlpool again! After all said and done, this pair has cost me total purchase and repairs over $4,000! And Now my bearings are bad! Thank God for YouTube! Im fixing it myself this time!

Hot water heater model #0833T402747 purchased late 2008 - Several service calls had to be made to a plumber, due to this unit not working. The door assembly was shipped to me by Whirlpool. I had to pay again for the plumber to install this part. Hes been here 3-4 times since I bought the unit. Last Wednesday, May 2, 2012, no hot water again. The same plumber came out and said the door assembly had again gone bad. Whirlpool was contacted on Thursday morning and would not agree to do anything. They were given my plumbers name and number and I never heard back from them. I contacted Lowes in Acworth, GA and they agreed to replace the hot water heater. So now Im forced to pay for another install. I requested that Whirlpool pay this expense, and their representative, **, said no. I intend to sue them for all monies spent on this lemon and due to this lemon, I will never buy another Whirlpool product of any kind. I have told family and friends and theyve agreed that due to the bad product and worse customer service, they will also stay away from purchasing anything made by this company. Whirlpool certainly wont be hurt by me and me alone. But Ill make sure that anyone I run into at Lowes or anywhere else is even looking at a Whirlpool product will get an earful from me. This is the type of customer service that consumers dont have to put up with anymore. There are many resources on the internet to get the word out and I intend to spend a great deal of my time doing just that.

Exterior metal reaches temperatures that cause minor burns on an adult finger and could be potentially more dangerous for a child. The self-clean feature has crashed the oven on two out of three uses of this function and overheats handle.

Shortly after the warranty expired my refrigerator started building ice on the floor of the freezer. With the build-up of ice the freezer started leaking on the bottom. Sometimes it gets so bad I have a hard time closing the freezer door properly. The Model# GB9FHDXWS06, Serial# K31505096 of my Whirlpool refrigerator. I do not recommend any Whirlpool product. Do your research before you buy any Whirlpool product.

We bought a 20.5 cubic ft Whirlpool refrigerator. 2 months later it started cutting off, and on in a constant repeated cycle then run normal for a while. We had 2 Whirlpool repair appointments. The first guy said he couldnt come fix it unless it was acting up while he was here which was a intermittent issue. Refrigerators dont perform on cue. The 2nd guy came out after the first guy messed around long enough for the warranty to expire. We went ahead, and replaced the startup relay (most common problem). He replaced the control board, and wire harness. He said if that didnt fix it he didnt know what else to do. 2 hours after he left the fridge was right back to doing the same thing. He failed to report back to Whirlpool that the fridge couldnt be repaired. We contacted customer service, and their resolution was to get another repairman to come out, and replace the control board which had already been replaced. In the end they bailed on us, and left us stuck with a broke refrigerator, and we had to buy a new one ourselves. I might add it was not a Whirlpool. They spent $471 trying to fix a broken fridge, and wanted to send another repairman (another $100) to fix a $629 refrigerator how does that make any sense. It was a very disappointing experience, and Whirlpool should be ashamed.

Bought microwave two years ago, almost immediately when stove area got warm, the microwave would not work properly. It would beep, the info keypad would cycle, then freeze up. After unplugging and letting it sit for a while, it would work fine for a time. Now it doesnt work properly at all. We keep it unplugged until we need it then it may or may not work. I have had a service company look at it and the only thing they could figure was that was an electronic failure from the heat. I am concerned that it is a fire hazard and leave it unplugged. Not what I expected from a $1000 appliance. I wish there was a class action suit that I could join.

I purchased this Whirlpool Gold Series Refrigerator WRF990SLAMCO in 2012 and it cost me $2400.00 from Lowes. Worst purchase I ever made!!! I will never again purchase or recommend a Whirlpool product. I paid for extended service agreement from Lowes. Before the first year was over, ice was forming on the inside roof of the refrigerator and the whole cooling system/grid needed to be replaced. Then the cooling system went out, followed by the ice maker (PS the ice bucket container was rusted within the first year), then the whole electrical panel on the front of the refrigerator where the ice/water dispenser is.For the last three weeks I have had water leaking out of the top of the refrigerator adjacent to the water filter. My home warranty wont cover. It is a $400.00 repair to replace the circuit that attaches from the water filter. I called Whirlpool 2/14/2017 to complain about the product. She tells me that there havent been any complaints logged about the refrigerator. Seriously??? Read your reviews! The gal on the phone offered a discount to purchase a NEW PRODUCT! Are you serious??? Take my advice. DO NOT BUY WHIRLPOOL. They do not care about their customers or creating a well made USA product. Ill buy foreign next time!

Long story short, we replaced a very old Whirlpool water heater with a new one a couple of years ago... We have had nothing but trouble. First, pilot light wouldnt stay lit. Found out that it was defective.... Whirlpool DID offer a no cost conversion kit. Had to pay shipping and installation costs. Have had the plumber out four more times to try to ANYTHING to keep it lit.... No luck. He even spoke to a Whirlpool tech on the phone and followed his advice. I have filed an online complaint with Whirlpool and the site stated that I would hear back within three working days. Guess what.... no reply. I have four other Whirlpool appliances that I love, BUT as they wear out, I will NOT consider Whirlpool.

I will keep this brief because many of our issues on our 18-month-old washer are in other reviews. The anger I feel towards Whirlpool Customer Service and the logic they use in providing repairs on a “goodwill” basis are unbelievable. After a Whirlpool certified appliance repair person diagnosed our fairly new washer as requiring the entire guts to be replaced... transmission, bucket, etc., we were told the repair bill would be over $1,300! Are you kidding me... the washer only cost in the mid $500 range, and now Whirlpool is going to do us a big favor and cover that outrageous bill! I told the customer service supervisor to please give us a new washer and take away our broken washer and use it for parts (if there any good parts left in this miserable machine). His reply “thats not going to happen”. He used this phrase to us at least 20 times during our service call until I finally told him I thought his attitude was aggressive and demeaning. I refuse to be bullied by a major manufacturer for a substandard product.I can only warn you when considering Whirlpool (and every major appliance in our two homes are Whirlpool) that you should use due diligence in your selection. We paid extra to upgrade all our Whirlpool appliances in our homes and I will never make that mistake again. And don’t get me started on the white film that covers my dark clothes. They say I use too much detergent... not true. I am not stupid and understand the HE requirement to cut way back on soap.

Bought a Whirlpool Cabrio HE washer over a year ago. Recently, the spin and drain cycle stopped working. Went to find a repair person only to learn that many dont work on this model because of all of its problems. Did find a company who replaced a part ($100). Now sounds like a thrashing machine when it spins. However, now the machine wont even go through a regular cycle. Dont buy this brand!

Whirlpool gold series bottom freezer unit - We have had numerous problems with this refrigerator. We have had several repairs done on it and have still not solved the problem. The defroster does not work right and we have to unplug it so it will unthaw, then the refrigerator gets cold again. The freezer when it is acting up freezes food and ice cream so hard it is inedible. We have just purchased a different refrigerator. This Whirlpool model has also been discontinued from what I can find. No doubt because of a design flaw. Why are they not responsible for this? We bought this appliance in good faith.

Very dependable. Like the steam clean function. Love that it is front loading. Like that the machine has windows. The functions for towels is a plus. Time remaining convenient. Machine is very good looking.. A big plus is the choices of many different functions, many that I have not yet used, but are available too.

Problem of refrigerator is working good for a few days, then the freezer is all melted down for a few days, then back to working good again. Model: FD2560HES. Serviced on and by: 7/16/2015 - ** - told me the controller board is bad, need to order part. 7/23/2015 - ** - replaced the controller board. Resulting same problem. NOTE, which means my old controller board is as good as the new one. 7/30/2015 - ** - opened the freezer, back of refrigerator, told me the compressor is no good, gave me an estimate of total cost $817.86. I did not accept the proposal, and I did not agree the compressor is no good. I called and scheduled for service after and scheduled to have service on 8/4/2015. Then got called from the office, said, Cant come on 8/4/2015 and told me I have to pay the $95.00 first visit. So I called and spoke to the manager, then scheduled for next service.8/13/2015 - ** - when he came, the refrigerator is working fine. He said, Cant diagnosis the refrigerator, told me to call for service when it is not working. He said the compressor is good. 8/15/2015, early morning the freezer is all melted. I called, been told cant service the same day. 8/17/2015 I called the office (1-888-717-9322), requested to talk to the manager, promised to call me back. By this date 8/28/2015, still no call back from the manager. They are located in Michigan. I was told the local office address is: 9582 Katella Ave., Anaheim, CA 92804.

I have a 1 year old Whirlpool washing machine (Model: WFW94HEXSW Serial:C04151969). The grease from the drum is found to be the cause of clothes being ruined during the wash cycle. I waited over 3 months for a replacement. The drum arrived broken. I ordered again, and it was then said to be on back order. The water shut off developed a slow leak, causing the water to fill, and flow out the front door, causing carpet damage. We have been forced to throw away good clothes, and pay to have our clothes washed, at a not so local laundromat. We feel it would be more than reasonable to have our washer replaced, and professionally installed immediately.

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

Here in Brazil, we use to have a very good brand of durable and reliable refrigerators and home appliances called Brastemp, and I was a very happy, fidelized customer of theirs. The time came for me to move to my new house. I gave my old appliances away to friends and modeled my new kitchen with Brastemp products. What I didnt know then is that Whirlpool bought the brand in 2000 and was selling their appliances over the Brastemp brand since.Whirlpool is clearly selling disposable appliances here. My vacuum cleaner failed after a week. My brand new refrigerator and laundry machines failed weeks after the one-year warranty and the dishwasher sometimes heats up and tips the 20A circuit breaker (suggested by the manufacturer), which is only for the dishwasher. For my complete surprise, my old appliances are still functional in my friends house. I got my old dishwasher back and I had absolutely no problems since.The vacuum cleaner failed again, this time 5 months out of warranty. In all fail cases, the price to fix it was about 70% of the price of a new one, which I took as a sign to replace them for something else. Good job, Whirlpool! You bought a nice brand, trashed it and gave the finger to fidelized customers you acquired with the new brand by replacing quality products with built-in obsolescence others. What do you plan to do next? Whatever it is, dont count on me as a customer ever again.

I bought a Whirlpool model # WRF757SDEM. It has failed twice in 7 months. The tops temperature hovers at 54 degrees Fahrenheit. The freezer works fine. I had a whirlpool fridge for 10 years before I bought this one and never had trouble with it. This particular model seems to have a design flaws according to other reviews I saw on this site that read similar to mine. We are waiting on parts. This is the second time in 6-7 weeks that it breaks down.

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

I have not had any problems with my Whirlpool refrigerator. It is four years old and has had two owners, including myself. It has the stainless steel look and has top to bottom french doors, one side is the freezer and the other the refrigerator. Both sides are equally the same size. It has a filtered water dispenser and ice maker in the door. Id say for the price it is a really good value.

I am waiting for the third repair on my front-load washer. I purchased them a year ago and was very satisfied with the ease of use. But in April of this year, the E2F3 started flashing up after I put in a load of clothes. I called the repair line and they sent a guy to check it. Determining it was a sensor, I waited three days for the repair. Then, almost two months later, now, it did this again. He called WP and they said to replace the sensor again. I waited two days for the repair. Before he left, he started the washer to run through the cycle - no problem. I then put in a small load of clothes, and almost immediately, the washer stopped and the E2F3 was flashing again. I called for a repair, and am again waiting (without a washer) for the repairman to come back on Tuesday!!!Today is Friday. I have been four weeks almost without a washer this year. Thats also the $20 I have spent this last week to wash clothes at the laundromat, not to mention the frustration of waiting for the warranty line to pick up and the hassle of having someone here when the repairman comes. I am glad I purchased an extended warranty for this product, but Whirlpool should make their products to last!

I purchased the Whirlpool Cabrio, Model no. WTW5640XW2, on March 3, 2012. I have tried every setting and water temperature and am totally dissatisfied with the washer. It does not clean clothes, tangles them into a twisted mess which requires that they be vigorously shaken out, destroys anything with a draw string. I had an online chat with a representative and was told she was sorry. I posted to Facebook and did receive a call from a repairman, which I will return; however, I do not anticipate receiving any satisfaction. The machine is worthless for washing clothes. I was better off with my 12-year old agitator Whirlpool washer. I do not understand how this machine can be allowed to stay on the market. Id be better off at the river beating my clothes against rocks. I hope someone will get on Whirlpool to give consumer refunds. I have been brought to tears by this machine and I am one tough cookie. Please help!

Outstanding, however our location has a hard water rating and as such we have to use a deodorizer to balance this out. A wide range of variables which are a fit for my purposes. Interior dimensions and layout are more than perfect for my uses. This particular dishwasher is built in so blends aesthetically into the design of the kitchen seamlessly. The product has a drying system which successfully blows air over the top tray to eliminate wet areas within depressions of crockery, glass, and so forth, its excellent. There is also a light steam setting which removes tough deposits from surfaces.

We purchased the 36 inch Wide 4 Door Refrigerator with Exterior Drawer about three years ago and it broke down twice in that time frame. Then yesterday the freezer part and ice maker have stopped working AGAIN!! We probably have spent $2000 on repairs. Complete disaster of a fridge!! Do not purchase one!!

After 22 years, I replaced my Whirlpool, electric, 50 gallon water heater, due to age and it was still working well. Went to Lowe's and they do not carry Whirlpool any longer, so I purchased and installed an A.O. Smith water heater, electric, 50 gallon water heater, model ES12-50R55DV110. Hoping for as good a product now, as I had from my Whirlpool. Also, I installed myself.

Havent even had the Cabrio washer for three years & Ive hated it since day one!!! First, our clothes dont come out clean OR come out with white streaks (changed soap, still happened!). Washing bedding is a nightmare! They are sopping wet & I have to wring it out. Finally broke down today & the repairman quoted over $600 to fix (paid $800). Take this piece of junk away!!! It cost me less to replace than get fixed; way to help the environment!

IM single, and my current refrigerator meets my basic needs quite well. One drawback -- it has an ice making machine which I never use. Therefore, that takes up room in the freezer which could be used for frozen foods.

We have had a GX5fhdxvy 07 Whirlpool Gold French door fridge with bottom freezer that is approximately 4 years old. Since the first 6 months of use, so 3.5 years now, we have had continual problems with a flat sheet of ice on the bottom of the freezer which then builds up and leaks all over our floor. Twice I have slipped, once banged my big toe to the point of cracking my big toenail and bleeding profusely, and the second time I slipped on my butt and really hurt my back. This is of real concern as one of my children has Cerebral Palsy and autism and could really hurt himself in our kitchen. We originally called while it was still under warranty and the technician said that we will need to learn how to defrost the tube that seems to be getting built up with ice. Thats the only way to fix it. We thought it meant fix it for a long period of time. After several months of this re-occurring problem, we realized that this is something you need to do very frequently, meaning several times a week. We have had no help from Whirlpool, they tell us that essentially it is our problem. They didnt even offer to provide parts. They were not interested in our problems and just asked us if we wanted to pay for a service call, and that was it. Now but what kind of service is this?? Clearly, after researching these products, this is a design flaw and a lot of consumers have complained about the the same issues. You would think that Whirlpool would have the decency and the business smarts to create a recall to solve consumers issues.Unfortunately, I am not able to purchase a new unit. This was an expensive purchase as it was… and we have absolutely no resolution to the problem. I have to say that after our injuries in our household, eventually someone will slip and do some serious permanent damage to their body or even worse, fall and sustain a head injury and perhaps even die. And although this may seem like a far fetched comment, it really isnt out of the realm of possibility at all! How long does it take for a manufacturer to respond to a flaw in their design??

Purchased a new home in Florida. Builder used Whirlpool appliances. For a year opening the refrigerator door has caused breakers to trip off. No matter what builder and Whirlpool do, breakers keep tripping. Cannot sell house with this issue. If someone was counting on electricity for a medical device they could die when refrigerator causes power to go out. Unfortunately, it looks like legal action is the only thing that will save our investment in the house.

I am on my second Whirlpool hot water heater within 7 years and both had a 9-year supposed warranty. Upon replacing the pop-off valve (at my expense), I paid $98 to replace the gas valve (part was issued by Whirlpool). Still having problems with pop valve and now the pilot light wont stay lit. Upon calling the number (877 817-6750) I was finally told they would replace the heater. When I stated that I did not want another faulty Whirlpool heater and that I would take the faulty heater back to place of purchase but that I wanted a local plumber to install their own heater, I was told that I had to have a thermal expansion tank or they basically would not do anything. Why would I want a third Whirlpool product? The second one is ruining my tiled basement floor as it is. So after spending over $600 for the faulty heater, now I have to spend $700 to replace it.

Bought the hot water heater, installed it. It leaked from bottom. Whirlpool warranties it. Replace it with new heater. It too leaks. I Google problems with Whirlpool hot water heaters. Found over 1500 complaints.

Purchased Whirlpool side by side June 2010. Within a few months realized major problem with ice maker. Reservoir on door would leak and freeze inside the door. Service man out at least twice, advised to maintain service contract as would continue to have issues. It still leaks, freezes up and does not dispense properly. Now the inside liner of the refrigerator is cracking and neither the warranty company nor the WHIRLPOOL Manufacture Co. will stand by their product. It is my intent to warn as many people as possible, so they will not have the same bad experiences.

Yesterday, my DC premier refrigerator purchased on 22.12.2011 suddenly stopped working for a long time, and the inside light automatically went off. All food, vegetables, and others are damaged and rotten. Now we are scared to keep anything inside this for huge loss and health problem. Kindly rectify this, and do the needful at the earliest.

First time owner of a Whirlpool range and will be the last time. Nothing but junk! I liked how the top grates were and electronic ignition. The knobs turn too easy and often when bumped will turn gas on without igniting. Very dangerous. The oven grates guides rusted almost immediately making it difficult to pull racks out. The oven light works sometimes. The glass on the oven door at the bottom came unglued. The bottom door under oven is a total waste. No use for it. In my adult life I have had different brands but this is the absolute worst and will never recommend this brand to anyone period.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

Bought this washer NEW 4 yrs ago. Now sounds like a freight train in the house when in use. Whirlpool customer service is absolutely USELESS!!! They do not stand behind their product and refuse to acknowledge what is a common issue. PISS POOR and will NOT give me a number to a higher up. Absolute disgrace!!!UPDATED ON 10/28/2015: This is an update to my previous review. 1st, I contacted Whirlpool who was absolutely NO help whatsoever and the person I spoke to refused to put me through to higher ups on the food chain. I was wrong in my previous review when I stated that we purchased the washer & dryer 4 yrs ago. It was purchased in January 2012. Started making noise in 2014 and has progressively turned into the sound of a freight train. I also failed to mention the stench that comes from this machine. It has also got to the point where it quits with 10 minutes to go in every wash. Whirlpool did send out a Whirlpool certified technician, which they paid for, who stated this has been a common issue with these and other models of Whirlpool Cabrio wash machines. Says in his 3 yrs with the company he has seen and diagnosed over 30 machines with basically the same issues (bearings are SHOT) and Whirlpool refuses to accept any responsibility for the defective design and that, in his opinion, they shouldve never been released. He gave me an estimate of $257.13 to repair. We decided to go ahead with the repair and technician came out only to tell me that there has been a re-work in the design of the replacement parts as Whirlpool realized they were faulty. So I now have to wait for the NEW designed replacement parts to come in as they are back ordered. WTF does that mean??? Shouldnt there be a RE-CALL and shouldnt they accept responsibility for this??? This has been, without a doubt, the most disappointment weve had with any purchase of a NEW appliance or, anything else for that matter, in our lives. After reading through some of these same complaints Im wondering if this machine is nothing, but a money pit and whats going to go wrong next. We also purchased the Cabrio dryer at the same time and have had no issues with it as of this time, but I assure you, I wait with baited breath. Their customer service department is piss poor AT BEST!! Please, stay away from ALL Whirlpool appliances in the future.