A Whirlpool hot water heater in an apartment I own would not stay lit. A plumber came to service and told me I needed a part from Whirlpool and that no one in town carried them. I called Whirlpool and after providing all information about the unit, she informed me that she would not send me the part because the serial number was not registered in my name. I explained to her that I purchased the building and did not install the water heater that a prior owner had installed it. All I wanted was a repair part. The Whirlpool rep refused to sell me a part unless I could provide a bill of sale where I purchased the tank. The part cost $41 which I was more than happy to pay for regardless of any warranty coverage. I have an obligation to provide services to my tenants. Being unable to repair the tank for a problem which appears to be commonplace for this brand, I had to replace with a new tank at a cost of $1380.00.

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

Less than 3.5 years use on a 2015 Whirlpool dishwasher...total costs to repair would be $600. This just to let other know. Whirlpool did nothing for me when the same issue showed 15 months after purchase and again 18 months later. Absolutely horrible experience. I dont want them to contact me and I post this as a warning to others. They just want to sell you high priced service contracts. Terrible dishwasher and even worse customer service.

We bought model WRS571CID*** which has an in-door ice maker that has stopped working after exactly 3 years. An excellent authorized service rep advised that the wire harness from the freezer to the door was damaged by chafing from normal opening and closing the freezer door, which has caused the ice maker wires to break, thereby disabling the ice maker. The only remedy is replacing entire the door, which would cost $1700 according to Whirlpools published repair data, which he is obligated to charge. Apparently, the wiring harness is not a replaceable part, because I suspect the labor hours needed to disassemble and reassemble the door is prohibitive. Well, a new fridge costs about the repair. I spoke to the Whirlpool company about whether they acknowledge that the design is faulty and that the door should be replaced at their expense even out of warranty, and they declined.So I advise prospective buyers to be aware of this issue and watch other reviews. There are many customer reviews on various sites complaining about this very issue. Our workaround is to put ice trays into the freezer to make ice, and while the dispenser still works, pour the ice thus made into the ice dispenser manually - until the wire control that also becomes damaged and stops working. I would not recommend buying this model.

I will be brief. Bought Whirlpool ref. model #WRF560Smywo4 on April 15, 2016. The refrigerator quit work July 29, 2016. Called Whirlpool. They responded they had no repairman in our area. After several calls they scheduled a repairman. He came and put on a part. It did not work. Called Whirlpool again. They sent the same repairman. He stated it needed a new compressor. A week later he arrived with the part (August 12, 2016). As of now the refrigerator is working. Now this was two (2) weeks without a refrigerator. This has been a bad experience. I WILL NEVER BUY ANOTHER WHIRLPOOL APPLIANCE AND RECOMMEND THAT YOU DO NOT PURCHASE ONE.

Very similar experience with warranty issues as everyone else. I purchased a brand new $2k side by side stainless steel model in Dec of 2013. It began not cooling in August of 2014 and they have since had 8 repairs and still will not exchange the fridge/replace the fridge. We finally had to buy another fridge and put it in our garage in order to have food in our home (of 5 kids and 2 adults). Ridiculous customer service every phone call. Possibly the least educated, rudest individuals always. Never buy from Whirlpool - worst reputation ever.

I have a double door refrigerator with a bottom freezer. It is slightly over 2 years old and has been in use for only 7 months of that time. We just got off the phone with Whirlpool service. They will cover the cost of the control panel and defrost control. The other one I paid to replace was only one month old and it failed again. In the time between that I had to have an Icing kit put in as the Ice maker was causing ice to form inside the back wall of the refrigerator. My first call to Whirlpool was very unsatisfactory. I ended up paying for the part and the service call. The second call was about the ice-maker and they were aware of the problem and sent me a repair kit for the problem. I still had to pay for repair service. So far I have paid $561.62 for their defective parts and service calls. This time my wife called (while I was taking my frozen foods to my neighbors freezer for the second time) and went through 3 people before being told the part was still under warranty and they will send a new one. When we pushed for proper service we got it. We should never have had to go through all this. We also lost over $300.00 of frozen foods. Never buy a Whirlpool refrigerator!!!

On 3/31/2012, we purchased a Whirlpool refrigerator (model #ED5FVGXWS07, serial #HR14602963) from the electronic appliance store called SuperCo, located at 17523 Colima Road, City of Industry, CA. Within around a month, we noticed that things kept in the refrigerator all showed weird phenomena; raw eggs were frozen inside the shells and ice is frozen on food and utensils stored, not in the freezer, but on the fridge side. At the same time, all food kept in the refrigerator turned bad easily, especially during summer time. Cooked food went bad and had a bad smell within just three days of being kept in the fridge. Also, the ventilator-like part on top of the fridge (the part which released cold air) had ice frozen around it from time to time.Obviously, the fridge was not working, as the freezer was not cold enough and the side was either making food turn bad or causing ice to freeze on stuff kept inside. The temperature seemed to be extremely uneven inside. We then asked SuperCo for repairs or a replacement, but they refused and referred us back to the manufacturer, Whirlpool. Repair services have been called three times on 2012, according to the paperwork records I have: a) on 5/31/2012, bad damper was broken and replaced; b) on 6/7/2012, (according to paper records from SuperCo), replaced parts; and c) on 6/20/2012, turned ice maker off and cleaned (the hand writing was hard to read).Then, around December of 2012, after the services, we experienced another great problem with this fridge again. When ice cream was kept in the freezer, they appear to have melted and my brother suffered from diarrhea after eating the ice cream. The ventilator-like part on top of the fridge still had ice frozen around it. We then took pictures as fresh vegetables kept at the bottom drawer of the fridge had ice frozen on it, too. I finally emailed Whirlpool through their official website on 2/7/2013 and asked for a new fridge replacement based on the Lemon Rule. An e-solutions specialist, Judy, replied that the product was warranted for a specified time period for repairs, not the replacement of the product, and Whirlpool declined my request for a replacement.Repair service was then requested by me for the fourth time, through email. On 2/21/2013, this fourth repair company came and checked the fridge. After a detailed inspection, the technician concluded that some parts of the fridge needed to be replaced, one of the parts called the thermostat. Strangely, after he called his company, he changed all that he said before and claimed that the fridge was 100% working and that no repairs were needed at all. Even when we showed him the frozen vegetables from the fridge side that we got recently, he insisted that the fridge had no problems at all and left.The way Whirlpool responded to my request was extremely disappointing, with their refusal to replace the fridge after three complete repair visits, and the fourth visit changing the inspection conclusion with no reason. Of course, the disappointment is greatest with the extremely bad quality of this electronic appliance. As of this moment, my fridge could still not keep food well and is causing us bad health. I think the only way I could go to now is to take action against the company for the lemon refrigerator, for breach of warranty, and maybe fraud.

WE had a Kenmore dishwasher and it never got the food off without scrubbing the dishes first. We decided to get a new dishwasher after being very frustrated. We purchased a Whirlpool and noticed a difference instantly. It was quiet, got the dishes completely clean, (no pre-washing like before) and was overall a better fit for our family.

I purchased a Household refrigerator Model WRF535SMBM00 on November 2013 at Home Depot which was not used but until June 2014. Awaiting finishing details on new house closing. The first year in use, I started having problems with freezer frosting, light not working, seemed like the ice produced in it, burned the light bulb. Prior to that sometimes it worked, sometimes it didnt. I started to think that it had burned, changed the light bulb. It didnt worked. After 2 months, all of a sudden the light worked, but the ice maker stopped working. What would be the suggestion to fix it, may I asked. This is very disappointing. You have a new house, and new appliances and they just dont work. And we are expected to pay for the repair! I dont think so.

My wife and I purchased a new Whirlpool gas range (Model#WEG745H0FS0) almost 2 years ago. Woke up one night to the smell of heat and the oven had come on! Thank God we were home. Very dangerous! Repair is going to be expensive! Havent used the oven portion in about 3 months now. And Thanksgiving is just around the corner! Any assistance is greatly appreciated.

We originally became alarmed by an awful smell and noticed that our Whirlpool Conquest side-by-side refrigerator freezer/fridge was not keeping food items cold. Upon further inspection, we saw that the compressor starter in had started fire and melted. Our refrigerator model #GS6SHAXLS42 and serial #SM3832794.

The exterior look of the refrigerator (WRX735SDBM00) is impressive and the stainless steel does not show finger prints easily. It has two french doors on top, a middle drawer, and the freezer drawer on the bottom. The interior is 25 cf, but there isnt much space, even with reconfiguring the shelves, and the crisper/meat drawers are so small, that a large bell pepper wont fit. When one French door is closed it pops open the other door, which then does not close back tightly. Although there is an alarm system to warn a door is open, it only works if the doors are open and not just cracked. We have to constantly push on both doors to be sure they are closed tightly, even after washing down the gasket to get a better seal.

I bought Whirlpool Cabrio washer two months ago (Model number : WTW7300DW0). They indicate washer use less water and clean better, but that is not true. Some clothes on top of the load were not even getting wet and clothes smell bad after washing. Even worse is that clothes got holes in many places and some clothes were totally destroyed after washing. In just two months, I have to throw away many of my towels and clothes. I dont believe this kind of washer should be sold again. This should be a recall to give us a replacement ASAP and remove any products still in the market. There are many complaints online, I hope someone will stop this and do the right thing.

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

I had a Whirlpool oven for 14 years. It worked great and the control board burned up during the cleaning cycle. I purchased a new whirlpool oven that did not have an exposed bottom heating element. It takes way too long to preheat and if during baking, you need to change the temperature, it starts preheating again and the displayed temperature is lower than the original temperature that was set at the beginning; and it takes too long for the oven to reach the new temperature. This appears to be the result of the bottom heating element being hidden. Heating and maintaining a consistent temperature is far more important than being able to clean the bottom of the oven especially when this is a self-cleaning oven.Updated on October 20, 2015: This is an update on my last review. I was cooking a cake at 350 degrees and when the designated time was up, I opened the door to check for doneness. The cake needed to cook a little longer, so I closed the door and the temperature immediately went to 300 degrees and started preheating again which of course caused the oven to get too hot for the cake I was baking. Who is designing these ovens??? Certainly not a person that cooks on a day-to-day basis. I will never buy a Whirlpool oven again.

My two year old Whirlpool refrigerator died. The compressor went bad. $859 to replace it. I only paid $999 for the fridge. This was crazy. Two years old. Heard it was not uncommon and the technician said most refrigerators warranty the compressor for up to 5 years but not Whirlpool. Had to go buy a new refrigerator.

Self-cleaning oven system DOESNT WORK AT ALL! The company rep I talked with said the system only works on lightly soiled oven and doesnt clean at all on the oven top or sides. When I explained that my oven was less than lightly soiled (I rarely use it) and that I had run the cleaning cycle twice and none of the soil was affected. Apparently the company is aware of this problem and I believe customers should be made aware of it BEFORE purchasing. I was told there was nothing they could do because my appliance is out of warranty. I asked if they had received other complaints and was told they had. I am not surprised.

Right from the start of buying a new suite of Whirlpool appliances, the light over the range burnt out. We figured it was just a bad bulb so we replaced it. Soon it burnt out again, replaced it again, then again it burnt out. I finally called Whirlpool about the problem and found out it is the electronic panel that needs to be replaced... Of course at a full charge to me! I am so over WhirlPoo, (yes I spelled it that way on purpose) every single appliance has had issues. I have just lived without a light over my range because fixing it is more expensive than buying a whole new microwave. Never again will I buy any WhirlPoo appliance!

5 years and 11 months ago I bought a 50 gallon gas, Whirlpool hot water heater with a 6-year warranty from Lowes. The 2007 water heaters were on sale, so I paid $329 for it. Within 6 months, I replaced the gas valve, and a few months after that, the thermo-couple went out and I replace that. Each time I called Whirlpool and got return authorization numbers for the parts, I still ended up paying for the parts plus labor. A year after that, the igniter went out and I had that replaced. Last year (the day before Thanksgiving), the thermo-couple went out again and I had to have that replaced - and it cost me for the part plus the labor - even though I had a return authorization number. I also replaced the water line connections/hoses to the water heater at that time. The customer service rep for Whirlpool told me at that time if I had another problem with the water heater, they would replace it for free - and the warranty was good until Dec 31, 2013 (this year). NOTE: Every plumber that has come out to fix the water heater and replace the parts stated that they see a myriad of problems with Whirlpool water heaters. They said the parts like the thermo-couples, igniters, gas valves, etc are poorly built and they replace them all the time. On Christmas Eve 2013 (two days ago), the water heater started leaking from the top by the valves - and so much pressure had built up in the heater the new water hose connections burst, spewing water all over the heater closet. I called Whirlpool the day after Christmas (today). At first, they told me they would not replace the heater as it was not in warranty and then I told them what I was told by the service rep last year. She finally agreed that my heater is indeed under warranty and gave me a replacement authorization number but she told me my warranty did not cover labor. I called Lowes. At first, they told me I would have to remove the old hot water heater myself and bring it back to the store in order to get my replacement. I am a 59 year old woman and I take care of my brother, a disable veteran. Although I am in good shape and healthy, I dont have anyone to help me get the gas and water disconnected and help me lift it into my Suburban. The man at Lowes agreed to bring out the the replacement heater and pick up the old one at no charge, but I will still have to pay $299 plus the cost of new hoses to have it installed. By the time the replacement one is installed, I will have paid a little over $1200 for a $329 water heater. I could have installed a tankless one for that, but I cannot see spending that kind of money right after Christmas. If I have one issue with this replacement, I will install a tankless water heater - and it will not be made by Whirlpool or any of its affiliates. My recommendation would be to steer clear of Whirlpool and their products.

My Duet Sport washer drum is damaged due to the poor quality of the bearings. I replaced the Whirlpool Duet Front Loader Washer Bearing & Seal Kit W10253866, W10253856 but because the bearings were damaged the drum is also damaged. When I opened the rear panel of the washer the bearings had literally come apart and bearings fell out. All of the floor and the oil/grease was everywhere. I replaced the bearings but it didnt matter because the drum is warped. Priced the drum and it is nearly $400.00 to replace the assembly. The cost of the drum assembly is about half the cost of a new washer. I will never buy another Whirlpool product again. Just a shame that the cost of a replacement drum is so high. What caused the bearings to just explode and damage the drum. What did I do to cause this? Absolutely nothing. I have since discovered that this is has happened to scores of people with this same washer.

March 18, 2018. I was called today to inform me that the right front burner on my new stove Model # WEG745H0FS0 (ordered in early September and not delivered until mid-October from Menards) was not operating properly. The flame was noisy and yellow. I inspected it and found that the front burner base was substantially damaged by heat. See photo (Whirlpool stove part damage1). On inspection of the other front burner base, I discovered early signs of the same problem. (Note changes on burner base on the left of the photo.)In this photo (Whirlpool stove part damage2.JPG), you can see the damage to the burner base and also see some changes on the 3 to 5 O’clock position on the burner base on the left of the photo. This stove is less than 6 months old. The fact that the burner parts can be melted indicate poor design and danger to the owner/operator of the stove. Further, the operators manual for the stove I bought does not include any information on the model I have. It has pictures of the range top similar to mine but the model number is completely different. In addition to this, the Aqua-Lift Technology for cleaning the oven is completely ineffective. This is noted in several other reviews of this equipment. The problem noted by the other review became obvious the very first day I tried to use this range. A 2 cup pot spilled all over the cooktop as soon as I put it on the grate.

I purchased a Whirlpool cook ceramic cook top for our new kitchen. The very first time I made something (it was lentil soup) something stuck to the cook top. I have had a ceramic cook top before for 18 years - never had a problem until the whirlpool cook top. I cannot get it clean. I have tried everything! Such as stove top cleaner designed for whirlpool cook tops ($22), other cook top cleaners, the single edged razor, a scrubby sponge, steel wool, I even resorted to furniture stripper - NOTHING has removed this spot. I am ready to throw out this new stove top! What a huge disappointment this Whirlpool product is.

I was searching online and stumbled across this site. Funny that there were so many complaints about the console on the ovens, considering that my issue was with the console on a dryer I purchased. I have only had the dryer a year, and it stopped working. There is nothing else wrong with it, no codes, no problems with the lights, or anything else. A technician came out and found that it was a small plastic and metal button piece that helps the press here: spot on the dryer panel to connect to the start button on the console. The little arm had broken and the switch no longer worked.Figured we would have to purchase a new button. NOPE, apparently we were told that we had to purchase a new console (over $200 dollars, close to $300 with shipping)???!!! We were also told that wear and tear can cause the issue. Wear and tear?? On a dryer thats maybe run once a week for about a year? Try again, I think I need my boots because it sounds like horse** to me. I think I will pass this information along to people I know that are technicians so that they can let people know not to purchase from this company because they obviously arent going to address the situation. I think I might also utilize social media to let people know so that they dont have to go through this much aggravation. I certainly dont know what we are going to do, since it took me a year to pay that dryer off, I cant afford another dryer at this time. So unfortunately with a new baby on the way, you wont get any sympathy from me if your company takes a character hit.

After 7 attempts to fix my 6-year-old Whirlpool Front Load Washer (original price $991.00) I had to trash it. Then I stupidly bought another Whirlpool Front Loader (WFW75HEFW) Feb 2017. It has not worked properly since day 1. The clothes come out dripping wet. At first I thought I was doing something wrong. I tried every cycle, limited amount of clothing and ran additional spin cycles to no avail. Finally I gave up and called for service.Whirlpool is very much aware that a number of their machines came off the line with defective spin bearings but they wont admit to it. Instead I am expected to have it repaired! It involves the entire inside of the machine being rebuilt. Its a 2 man job that will take 3-4 hours.This is totally unacceptable and it is obvious Whirlpool does not make a quality product nor do they value customer satisfaction. DO NOT UNDER ANY CIRCUMSTANCES PURCHASE A WHIRLPOOL WASHER. They are difficult to work with and I for one will never purchase or recommend any of their products. I purchased this washer from Home Depot and now my only hope is that they will honor my intention of purchasing a non-defective product. If not, I guess Im in for another miserable experience with a Whirlpool product.

I got my water heater 3/13/12. Ive had to restart it now 4 times & have been totally out of hot water for two months! How can I get help from you or Lowes? This thing is supposed to work for 6 years & I havent been able to keep it going for 6 months! Help please! Can I get a different one? This one hates me! Being widowed & having a metal hip, it’s hard to get safely into the attic to restart it and not sure it will work longer than 2 or 3 weeks! Ive been bathing in the kitchen because thats where the stove is! Thats the only way I have of having hot water, is on the stove! Thanks for listening!

We have several Whirlpool products in our home currently and have been very satisfied with their performances. We have their fridge, stove/oven, microwave and dishwasher, all of various ages. We purchased them from a local big box building supply company and installed them our self. The installation directions are clear and simply for the average D-I-Yer. We would recommend Whirlpool to everyone shopping for these home appliances.

Since there is only two people in this home, we decided to go for the smaller front-loading machine. This was purchased in 2012, still running. It does a clean wash, however common sense does remind people to not over-load a front load washer. If one follows directions, it gets the job done, and ones machine lasts longer without problems. Thanks.

I purchased my whirlpool washer on 01/24/2011 and I purchased a 5 yr extended warranty at the time of purchase. My washer broke down. I called the whirlpool co. After 5 mins getting through the phone prompts and another 30 mins on hold I finally spoke with a rep name Ashley who state that there was no account or record of my warranty. She connected me to another department where I spoke with Eva. I was advised that since the company that sold me the warranty was out of business whirlpool would set up an account for me if I faxed the information documenting my original purchase. I faxed the information, waited three days without a response. I called today went through the phone prompts and could not reach the reps I spoke with before. The reps today were not helpful and refused to even try to get me to the reps I spoke with before. I was advised that the previous reps provided inaccurate information.If an appliance comes with a one year warranty and a consumer purchases a 5 yr extended warranty should it be added to the 1 yr or is the first year included in the 5yrs? Wouldnt it only be a 4 yr extended warranty if that were the case? I am very disappointed in the lack of quality of my washer and misrepresentation that was communicated by whirlpool reps. At the very least they should answer the phone promptly and honor the commitment to repair products. This is the case number (**) I was provided the first time I called, but it is not recognized by the reps I spoke with the 2nd time. I was provided 866.368.6478 as a contact# and a fax#. I faxed my receipts to that number as instructed.

Very dependable. We loved all of our appliances in the past as well as in the present. It has been a go to for us especially with bad experiences with other brands like OG and GE. We have gotten a washer and a good dryer and have worked. No complaints whatsoever.

Weve had our Whirlpool Cabrio washer and dryer just over a year. I like them both but then we are having problems with our lid. The first one cracked after 9 months and they replaced the lid. Two months later, the new one cracked and they replaced the hinges and lid again. I assure you we are very careful when lowering and lifting the lid. I do 80% and my husband does 20%, and we are very cautious of it especially after the second one broke. Now, I was just putting laundry in and the third one cracked while lifting the lid. There is obviously a problem, and Im wondering if anyone else is having the same issues. Eventually, it will crack all the way through which will cause the glass to pop up and the lid wont lock. I will not buy anything with a glass lid again!

I just contacted Whirlpool Co. by online chat concerning the workmanship of their microwave that is less than two years old. The interior top has begun to bubble and peel as well as rusting. This is the 2nd Whirlpool microwave where I am experiencing bubble and peeling paint as well as rusting. Whirlpool informed that the manufactory was 1 year warranty and to contact a technician at my expense. There is a real health issue here and I hope consumer complaints about this company is being monitored by someone who can help all of those with concerns.

Model ED5PVEXWS14/Whirlpool Stainless Steel side-by-side refrigerator purchased from Lowes: My wife and I purchased this refrigerator from Lowes as a part of a kitchen renovation project. It was delivered by Lowes and worked great. The shelving cracked at the back as other owners experienced, but I blamed that on kids and was fine with ordering replacement parts online. Fast forward to the present and a year later, everything is working fine. Out of the blue it quit cooling or freezing on 6/12/13. I thought it was a capacitor problem, but since we purchased the refrigerator on 4/28/12, we decided to have a repairman come out and check. When he accessed it, he found that the compressor was bad. He stated every once in while you get a fridge with a bad compressor. He also said I just happened to have the particular refrigerator he sees frequently. I normally buy all Whirlpool products - microwaves, washer and dryer, dishwasher, my old refrigerator (still working at my relatives house), and my daughters college fridge. This is the first time I have experienced something of this nature with a Whirlpool product and hope I can work out a resolution with them or Lowes.

I have had my Whirlpool side by side for over 12 years. The 2 minor problems it has had, the repairman replaced the parts and she’s working great. Hope I’m not cursing it. Whirlpool 19.8 cu ft. Model EDOGTK.

My first time with Whirlpool (Always had GE) but at the suggestion of our builder, we went with Whirlpool and the stainless steel is horrendous. Nothing will clean it or make it look STAINLESS. My refrigerator, dishwasher, double oven, tall vent all look terrible no matter what I use! I have never had this problem before. Im embarrassed to have anyone go into my kitchen...

My wife and I purchased a Whirlpool Duet washer and dryer 5 years 1 month ago. We purchased the front load style because they were supposed to be better made than the older style. Its just my wife and I no kids. We never overload the washer or dryer. Now the drum bearings in the washer have gone out. I feel that a washer should last longer than 5 years and 1 month. I dont think I will be buying another Whirlpool.

I purchased this Refrigerator Model #wrb322dmb, bottom freezer, 21cu ft. last year on July 3, 2015. In September I noticed rust spots on the top door. I called Home Depot where I purchased and they directed me to Whirlpool. I did purchase an extended warranty with Home Depot. Whirlpool did replace the top door. Thought that took care of it. Today one year and two weeks out of warranty, I again notice rust on both doors. Called Whirlpool. They said too bad out of warranty, not considering I had a previous report of this very same issue. So since I am very unsatisfied with this result and the fact that an expensive product is rusting, I decided to share to try to prevent someone getting stuck. Stainless steel is not supposed to rust which leads me to believe that it is not Stainless steel, but a Stainless Steel finish and not a very good one. So I am stuck with a rusting $1200.00 refrigerator only after one year. I have always purchased Whirlpool, but no more. They lost a 40-year customer. I have always bought American made but no wonder people are not buying American made any longer. TO SUM IT UP WHIRLPOOL STAINLESS STEEL APPLIANCES RUST! DO NOT BUY!

After 48 years of marriage, I had never had a new, matching washer/dryer set. I had had several new washers, but only used dryers. These all were very good units and served me well for years. So I was excited to buy a new, matching set. I have never been soooo dissatisfied with anything in my life. As I have read from other reviews, the washer uses very little water, sometimes hardly enough to get the load of clothes wet, very little soap, and in my opinion, does hardly any agitating. I dont feel my clothes have ever appeared clean. The only ones that look clean were the ones that started out looking clean when I put them in. I know this is all an ecology thing, water saving, government guidelines, etc., but please give me my old washer back. It did enough agitation to get clothes clean. And the dryer usually will not get the jeans dry on the first attempt. I have tried various settings, and they just dont get dry. In short, I HATE THIS WASHER/DRYER SET. I have heard others talk about the same thing. No one likes them, but we are stuck with them. Would like to have the government step in and see how dissatisfied everyone is with them and force Whirlpool to give us our money back, trash these units, and buy something that actually works. PLEASE, IF YOU ARE LOOKING FOR WASHERS AND DRYERS, DONT BUY THESE. I believe they are called Cabrio.

My contractor purchased a Whirlpool NU50T61-403 water heater at Lowes. After several months the gas valve stopped working. Whirlpool sent a replacement gas valve which stopped working after a month. When I complained they offered to send another replacement, which I declined. They also offered to have it repaired by 2 firms which were very poorly rated on Yelp. Whirlpool stubbornly refused any other remedy. As I needed to resolve this right away because tenants were depending on having hot water. I replaced it with another hot water heater. In summary I wasted $570 for 9 months of use.

My Whirlpool side-by-side refrigerator is just 4 years old. When they delivered it, they noticed damage on the bottom which required them to bring me a new refrigerator. The new one had issues with the ice maker that required multiple service calls to fix. The refrigerator door always seemed a bit misaligned as it was a bit lower than the freezer door, but it closed, so I never complained. I was just tired of all the issues! During the last six months, the door started to remain ajar instead of closing completely so that we had to always be sure to apply sufficient pressure to close it tightly. I considered calling in a repair, but it was still closing so I thought I might be overly critical. As it got worse, I realized the door was defective, but one day, it just fell off completely without warning as though the hinges were made of butter!After multiple service calls, a tech reattached the door, but I could see that it would not hold and sure enough, it is starting to remain ajar again. I have contacted the warranty company who is now saying the service tech claimed we were hanging on the door. This repair company the warranty company uses has an F rating with the BBB. Now, Im being told it may take a couple weeks to get another repair company to give them an opinion, but the issue is clear, the door was defective and it looks like they found a way to avoid having to make good on the warranty!

I purchased a #Whirlpool; 4.3 cu. ft. Mini Refrigerator Stainless Steel BC-127B from @Target. There was a delay putting it into service (6 mos), so the Target store warranty was expired. The unit remained in its factory shipped packaging until put in service, so nothing out of the ordinary there. After barely two weeks of use, the compressor died. I followed all instructions (including waiting 8-10 weeks) from Whirlpool, but still have not received a refund or been given any information beyond we escalated it to our warranty team but havent heard back yet. The unit was a poorly made piece of junk in other respects as well. There are dozens of complaints about precisely this - defective units - on any site. Do not be fooled by the dishonest way that #Targets website lists reviews. Dig deeper.

After reading all of these reviews, Im not surprised at the negative comments. My husband and I owned a Whirlpool washer and dryer for 25 years prior to them both dying the same summer four years ago. I absolutely would not purchase anything but another set of Whirlpool washer and dryer because of the longevity of our previous set.We bought the Cabrio set 4 years ago this summer. After two years, we discovered it had a slow leak at the back hot water valve and underneath it somewhere when it spun and it had slowly leaked under the wall into our living room which eventually caused our hardwood floors to buckle. We had to replace the flooring in that section at a cost I will not even say and had a repairman come out and fix the lid lock, leak where for some reason there wasnt a washer in the valve area, underneath and the problem with the spin cycle. This was at a cost of around $200.00. Of course our one year warranty had run out. The next year it did the SAME THING AGAIN!!! Although we caught it quicker, we STILL had to replace a small section of hardwood flooring and have the machine repaired yet again at the tune of approximately $200.00. Now, as I type, our machine has yet again flooded our laundry room one year later and I will have to call a repairman in the morning yet again! Its becoming an annual and costly thing!!!I came across this site while looking to see if by chance this machine had been recalled and we would be able to get another one at no cost since we have already paid a fortune for the errors it has caused. I will be reporting to the Better Business Bureau and writing YET ANOTHER letter to the Whirlpool company with the hopes that they will recall this machine!! If enough people protest and report this shoddy workmanship, maybe they will!!!

I have used Kenmore products for about 50 years, so when it came time to replace my old washer I looked at Kenmore/Whirlpool. I upgraded to the top of the line. I had been warned by 2 service techs (2 different companies) that had tried to keep my old Kenmore alive that the new ones are not up to par compared to the old ones. The first very small load that I tried, was not even thoroughly wet when I took it out to put in the dryer. 1st service call, tech suggested that I put machine on extra water.That helped sort of. A few weeks later, wash is not getting clean. Called Whirlpool, they suggested getting the washer cleaner and clean the washer. Went out and bought a special cleaner, $10-12 and two cleanings later using the extra water and extra wash water I now was getting cleaner clothes. They said I would need to clean the washer every 2 to 4 weeks. I have continued to use washer but frequently have to rewash about 1 in every 5 to 10 loads as it doesnt always clean everything in the load. Called the Co., they sent service out, they said its OK!In Jan. We went out of town for 2 weeks. The washer had not been used for 4 days before we left. Came home to water all over the floor which are hardwood. Needless to say our hardwood is all warped! Service came out, ran the washer for about 15 min. and said it was fine, nothing wrong! Called Whirlpool again! Washer is now out of warranty. They said call a local service, out of their hands as it is out of warranty! Nothing more than they can do.I have used Kenmore/Whirlpool Appliances all my life and they have been wonderful. The new ones are garbage as far as I can tell. I have a Refer that is now 3-4 years old and I have had problems with that, a new dishwasher that is 2ish and have had service out on that one, now my brand new washer top of the line and it is so bad I am afraid to use it unless I am sitting right in front of it watching it! Further if you have the rinse cycle on the clothes come out so wrinkled that you need to get out your iron out and iron everything including sheets and linens. Lucky that I did not replace my old dryer! Do I recommend Whirlpool anymore? Not on your life. I wish I knew what to replace them with!

The W/D combo-Cabrio is crap... Dont buy it. Salesperson @ Lowes told us all washers moving away from the agitator to ones like this so we bought it. The washers does not clean everything - does not use enough water to clean - leaves your delicates so wrinkled and clothes in general beat up. The dryer decides when it thinks your clothes are dry when they are actually still very wet... very noisy. Whirlpool must have sold out because quality integrity sure is gone.

I liked Whirlpool brand. I was excited about the convection option and the warming burner. Plus it was on sale. I really like the AquaLift self-cleaning option but guess what? It does not work well. It is very frustrating!!! I would not recommend buying a Whirlpool oven/range. Low quality construction, features that work poorly, and poor online reviews. Another deal breaker would be poor customer service and repair service. Over, the Whirlpool oven/range is fair. The electric glass top does a good job cooking but keeping the glass top clean is nearly impossible. The oven does a good job baking BUT, the AquaLift self-cleaning does not work. I would recommend that consumers pass on the Whirlpool.

Purchased this dishwasher in 2015. It has been horrible. The unit has never cleaned sufficiently on any cycle. I run the unit in the evening for the full cycle with heat. It takes almost 4 hours. The dishes are still soaking wet the next morning. We would be considered light use as a family of two. I hand wash any larger pans or cookware as the racks do not support anything of midrange weight or above.With the poor cleaning, I purchased a additional silverware rack and placed it more centrally to attempt better cleaning. It remains mediocre at best. The most recent irritation is the door latch has started pulling free from the unit and remains attached to the door! I have to take pliers and remove it from the door and reaffix it into the housing of the unit. Will never recommend this nor will I ever purchase anything from this company in the future. Sad to see the quality falter to the point of absolute failure.

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

I bought this machine in September of 2014. Six months later I HATE IT!! It does NOT get the clothes clean and dont even try to bleach white towels or socks, it doesnt pump the correct amount of hot water and things come out just as dirty as when they went in. It tangles everything together and frequently stops working because it unbalances the load with its lack of water. Ive always been proud of how my familys laundry looked and now Im just embarrassed. Im considering donating this to a human society for dog towels. Stay away from this washer, its horrible. Im going to the laundromat and shopping for a new machine ASAP!

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

In Feb. 2014 we moved into a new Condo and bought all new kitchen appliances, MAKING one mistake, a Whirlpool side by side refrigerator, Model WRS322FDAM 01. It had to be ordered and was received by Lowes on March 10th. Letters from Whirlpool told me that their service warranty had ended as of 2/1/15 which predated our receipt of the fridge. It is a bit noisy with the ice maker, and when it fills up with water, you can hear it, and yes, the ice does fly a bit when you put it into your glass.The worst thing about this piece of junk, is how cheaply it is made. The materials used must have come from the rejected pile of parts. Its just my husband and I, no grandchildren/children and very little company. So, the fridge received average use and then within 6 months, one of the drawers cracked at the back. I tried to glue it back together myself because I was told that it was not a covered item??? My repair lasted a few months and then came apart entirely. When I removed the broken shelf I noticed something around the LED light on the liner in the back of the fridge. I pulled out the meat drawer and found a crack that began at the bottom of the light and had moved about 3 inches to the left, and another one that began at the right of the light and that was about 4 inches or so.Life intervened and when I looked again, the right side crack had split and deepened and it had now crossed over to the rounded edging connecting the back liner to the side liner. The left side crack had also moved further to the left, and is now approaching the side corner. I spoke with Whirlpool and they sent out a repair company who e-mailed a photo of the cracks to them from our home. The company response was that they would cover the crack with 482395 liner tape. - this was their idea of a repair.I then spoke with a Lowes representative who agreed to send another repair firm out. Well, they came today and when they spoke with Whirlpool, they were told to order an Epoxy kit (# 8212572) - this was their version of a repair. I spoke with a supervisor and told her that they were not repairing the liner, they were just placing a bandage on top of the crack. I compared it to owning a new car but having cracks in the dashboard. In this case the dealer would place tapes over the cracks instead of just replacing the dash. Neither response from Whirlpool was a repair. All they were doing was hiding their piece of garbage. She disagreed and would offer nothing further. I told her that I was going to bring this to the attention of any consumer group that I could, and might even see if a class action suit could be brought to bear as there were many other reports of cracked liners. We are totally disgusted with the product and its manufacturer. Whirlpool used to have a good reputation, but after this, it is now at the bottom of the garbage barrel.

My Whirlpool refrigerator, model number ET8MHJKXM005, constantly leaks water into the bottom inside of the refrigerator. Its only 4 years old, for crying out loud! I have a repairman coming over in a few days who tells me the newer Whirlpool refrigerators are notorious for having the drain ice up. Why would Whirlpool design such garbage? They should all be recalled.

We bought a Cabrio washer model #WTW7300DW0 and are very unhappy. The clothes come out of the washer dirty, with chunks of soap, (yes we are using HE detergent) and patches of lint on them. The low water design is a joke. The clothes on the top of the load never get into the water. The lid needed repair from the first day we bought it. We have tried all the water settings and the clothes on the top barely move. Why hasnt Whirlpool figured out that this design is just not working? Our three month old washer is headed out of our house one way or another! Notice we didnt give it any stars!

I bought a Whirlpool refrigerator almost 10 days ago. They delivered a broken refrigerator and then the technician raised a replacement request. And then started the game of ignorance. Since 10 days I am calling hundreds of Whirlpool persons including Area manager, ware house, customer service, nobody is giving any date when I will be getting it. Moreover, they have stopped taking my call recently. Right now, I am at a loss how can I get a refrigerator or my money back... Last option is consumer forum. I really request you to never buy a Whirlpool refrigerator.

In November 2014, I purchased a Whirlpool 22 cu ft side by side refrigerator from my local appliance store. During that short time, there have been 4 instances where the ice clumps together and gets stuck, causing a large amount of ice to dump inside the freezer door. When the door is opened, the ice falls out onto the floor. I usually spend 10 minutes picking up ice and wiping up my kitchen floor. I have had the local store repairman over. He told me that was normal. Two things are seriously wrong with that statement. When I spend 1600.00 for a brand new appliance, I should be able to depend on the fact that it will function in at least a somewhat acceptable manner. Additionally, that statement by the repairman convinced me that he was not really interested in fixing the problem. I really dont think the normal operation of a new appliance is for it to make frequent, large messes for the owner to clean up. This appliance is junk and you would be foolish to purchase it. Spend a bit more money and buy a Samsung or LG. Save yourself the frustration and sense that you have been cheated and deceived by Whirlpool. I will never buy this brand again.

I have had this washer for about 7 years. I have not had any problems with it. I wish that it is stingy with rinse water. I see suds on the items before the rinse cycle and it doesnt seem to use enough water for a good rinse. Therefore I use the extra cycle.

Pulled a track home water heater out to replace with a Whirlpool 12 year smart heater. Well within 4 years with tank flush every year the water coming out of my hot water tap looks like mud. We have whole house water filters and when you drain the sink there is a layer of rust. I called and asked them what I should do and they told me to flush it with apple vinegar. Did this but a week later it was back. Called again and was told to do it three times with apple vinegar. There was nothing about this in the care manual about apple vinegar. I will never buy Whirlpool again NEVER!

Ice maker stopped making ice. This side by side Whirlpool refrigerator was purchased 4 years ago. We called Whirlpool. An authorized repair man identified the problem. At the bottom hinge of the freezer door two of the wires have been broken. A defective design, but no recall from Whirlpool. The solution is to replace the entire freezer door for a cost of $1200. Ridiculous that a replacement door cost more than the purchase price from Lowes. It would appear that these 2 wires could be reconnected, but Whirlpools only solution is an entire new door. Automakers stand behind their products with recalls, but its not the same with Whirlpool. Love my Whirlpool range, washer and dryer, but this counter depth side by side is a real loser.

I purchased this washer about a year ago and have been dissatisfied with its performance since Day One. It takes a long time to run a cycle and has not saved me any water or electricity. I always have to add a second rinse because it doesnt get the soap out (using the recommended detergent) with the regular cycles. Sometimes it doesnt get my clothes clean.Today it tore huge holes in the front and back of one of my very favorite T-shirts, which was a very meaningful gift from a very good friend. This was due to its tangling the clothes even more tightly than it usually does; the tangling process was what tore the material. I always take pains to load the machine in the manner instructed, to put the clothes in loose balls around the outside of the drum, but nevertheless it can take me several minutes to untangle my laundry before I put it in the dryer (also a Whirlpool -- just waiting to see how it disappoints). If I had read the reviews here before I selected my new machines, I would never have purchased the Whirlpool washer or dryer. I certainly never will purchase Whirlpool machines again.

My wife and I bought a Whirlpool Cabrio washer and dryer set less than three years ago. And so far the dryer has been ok, but our washer has had to have a new motherboard and now it smells like its burning. Our last washer and dryer set was a hand down and was over 15 years old and never had any issues like our new ones do. Ill never buy another Whirlpool product again.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

We bought our Duet washer in 2007 with a three-year warranty. In 2010, the washer started banging so we called it in for repair. It was determined that the bearing on the drum was bad, so the entire drum assembly was replaced because the poor design of integrating the bearing into the drum. Almost one year to the day, our washer started banging again. The washer is no longer under warranty. We were told the parts are around $400 plus and another $400 for labor.The repairman was from the store we bought the washer and he is a certified Whirlpool repairman. He related to us that this is a very common occurrence for Whirlpool washers because they are using cheap foreign made bearings. He services this problem on a weekly basis and Whirlpool will not do a recall because unless it is a safety hazard, it is not a concern to them if consumers have to pay out the nose for cheaply made parts. This repairman informed us that during training at a Whirlpool class, he learned that on the main board of the washers, they could put a 2 cent lamp that would indicate a bad board which would simplify diagnosis, expedite repair and reduce service time, but Whirlpool wont do it because it isnt cost effective. The repairman told us that we can call customer service until we are blue in the face, but Whirlpool wont give a ** because it is out of warranty. He sees this happen all the time with Whirlpool. My wife called Whirlpool Customer Service just to be told we are ** even though the cheap, crappy bearing that went bad was done under warranty, a year earlier.Well Whirlpool, I guess you lost another customer who will make sure that you lose a lot more customers. We are going to take our business elsewhere and we will make sure all our family, friends, neighbors and coworkers know how bad your customer service and poor attitude is toward consumers. If you cant back your products when you put cheap foreign garbage parts in your product, then you need to lose business and get out of the market.

My Whirlpool oven (Model WFG505M0BS0) stopped working - the bottom oven part (the top burners were OK), the display on top functioned normally, but no fire came on. I called Whirlpool, and then I accessed Whirlpool online and scheduled service with their official service representative - Flamingo Appliance Service ** for September 9, 2020. When the repairman arrived on 09-09-2020, he opened up the stove and checked it, and he told me that a computer part needs to be replaced, as well as the igniter, and the cost would be between $400.00 and $600.00 (I dont remember the exact amount), I told SEVERAL times, maybe its just the igniter (for which the cost would less than $100.00 AND already included in the $134.95), but he insisted that the computer needed to be replaced, I did not like the way he explained it to me, it did not make sense.After that I was planning to buy a new stove, as the repair was too high. But, I decided to try to change the igniter myself before getting rid of the stove (the igniter cost was $21.00). I just got the igniter recently, and installed it, with help from YouTube, and what do you? THE STOVE IS WORKING!!! This is fraud!!! FLAMINGO APPLIANCE SERVICE ARE THIEVES, AND BY ASSOCIATION, WHIRLPOOL, WHOM THEY REPRESENT ARE THIEVES ALSO. I shall publicize to the best of my abilities: NOT TO BUY WHIRLPOOL PRODUCTS!!! This was not a mistake!!! This is the way they rip people off!! Either by paying exorbitant amounts for unnecessary repairs, or by buying new appliances when the old ones are still good. Dont buy Whirlpool!!! Dont use Flamingo Appliance Service. Theyre both fraudsters.

I have owned a French-door Whirlpool/Kenmore refrigerator for less than 3 years & all the lights start flashing fast when you open the doors. Anyone that knows anything about seizures know this can set one off. Turns out its a common problem with the LED lights & you have to replace circuit board at over $100.00 for the part, plus you may have to have it installed. Best to stick with a $0.99 bulb you replace every 5 years.

I have a two year old Whirlpool dishwasher. The soap dispenser cover broke shortly after the warranty ran out. It cost 100.00 for repairs. A year later, it broke again. I sent a letter and the part to the CEO of Whirlpool. They sent a repairmen to fix it free of charge. When you have a problem with a Whirlpool product go to the head of the company. If they get enough calls they will make better parts. Call 1-269-759-6919. Write a letter, return request receipt. It takes a little effort, but it helps a lot of people.

On July 30, 2009, we purchased a Whirlpool Gold French door refrigerator with the freezer drawer on the bottom. It was delivered on August 1, 2009. On August 3, 2009, the ice maker and water dispenser stopped working. After three unsuccessful service calls and the installation of various replacement parts, Whirlpool gave up the effort to fix the ice maker and water dispenser and delivered a new replacement refrigerator on October 15, 2009. Todays date is April 14, 2012 and here we go again, the ice maker and water dispenser stopped working. Luckily, I purchased a five year warranty on the unit. However, after reading all of the posts about fire hazard issues and other various issues with Whirlpool refrigerators, well probably go out and buy a new refrigerator and write-off the $2,500 that we spent for this refrigerator as a bad investment. We purchased a Whirlpool refrigerator based upon their reputation of providing sound products. However, based upon this experience, I can guarantee the folks at Whirlpool that our next refrigerator purchase will not be a Whirlpool product or a product of any subsidiary of Whirlpool.

I purchased a Whirlpool Duet front-loading washing machine on September 27, 2010. By October of 2011, it was making a loud grinding noise during any spin cycle. I called for service and was told I needed new bearings which entailed rebuilding the machine. I had purchased a 5-year extended warranty. I was originally told by the warranty company they would replace the machine.After waiting two months, and after several contacts made by me to the retailers customer service, I was told the machine would not be replaced, but repaired. After the repair, on January 6, 2012, the machine now rattles and shakes so much during the final spin cycles. It is literally impossible to have a conversation with someone standing next to you in the same vicinity as the washer, it is that loud. I am sorely disappointed with the Whirlpool line of products and with the retailer who has been dragging their feet on customer satisfaction.

Found a crack under a freezer rack from sidewall to back wall. This has caused the refrigerator not to operate properly. Every appliance I own is whirlpool. Bought in 2005. Also bought another in 1994 that is working fine. What surprise me is having a crack in freezer wall. Nothing Whirlpool can or will do! Was a lifetime Whirlpool CUSTOMER. GUESS WHAT? FACEBOOK I GO. 3309 FACEBOOK FRIENDS.

My top loading Whirlpool washer model WTW57ESVW1 failed after just over two years. When I called my service man, he turned it on and immediately told me it was not worth fixing as the transmission was bad and this model was known for this issue. I contacted Whirlpool Corp. and the person on the phone stated she could do nothing for me. I asked for a supervisor and was told she would give me a discount on parts, but I had to find out just what part it would be before she would tell me what percentage of a discount she could give me and the service call was my responsibility. Due to this treatment, I will not buy another Whirlpool nor will I recommend it to any of my friends. I will also post on Facebook my experience with Whirlpool.

Whirlpool Cabrio Washer - After 15 months, washer bearing have gone out due to tub seal leaking. Repairs are $450 but repairman doesnt want to touch it due to he know it will go out again. Whirlpool said Im sorry. Lowes said these are coming off the shelves soon but there are still some for sale. DONT BUY!!!

How can Whirlpool deliver a new refrigerator/freezer and refuse to include a shelf in the freezer even though there are rails built in on the sidewalls to support a shelf??? Of course they will sell me one. The cheapness of todays manufacturers is appalling especially in light of the prices they charge.

Purchased washer Aug 2012 and has increasingly been leaving white residue after wash cycles. Have used the Extra Rinse function to no avail and use half the recommended amount of HE Tide. Now I have to run the Rinse, Drain, Spin function twice with darks to remove the residue. I have also been doing the monthly maintenance which has not helped at all. This machine seriously detracts from the Whirlpool name and if they are unwilling to fix the problem, it only publicly displays the companys integrity.

Bought a Whirlpool fridge at Lowes sale when the previous Samsung suddenly died before the Thanksgiving Day. Under the circumstances at the time, it was largely a price driven decision (for a fridge of a certain size with some non-negotiable characteristics, though.) I could not be happier with its performance in the two years since the purchase.

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

We bought a Whirlpool side by side refrigerator new. When the first one was delivered it had electronic problems. We sent that one back. The next one, same model, seemed to be alright for a few days then it developed electronic problems. My son discovered the problem was caused by a faulty door panel in the freezer. The panel would come loose and if you knocked it back in place the electronics would work until the panel came loose again. Whirlpool would do nothing about our complaint. Now the refrigerator section freezes things. We paid to have it fixed 2 months ago and now have the problem again. The repairman said he had brought up concerns in meetings about the same door problems and been blown off. Our food is freezing in the refrigerator again and Whirlpool has blown us off again. We will never buy Whirlpool again. I trusted Consumers Report when I bought the Whirlpool and that goes to show you that doesnt always work either.

Its a very good one, it kept my stuff cold, and fresh when my other fridge went on the Fritz, but only one problem, and that is, it has glass shelves and if you have kids, it’s hard to keep clean!

Our double oven was part of our new home purchase so we really didnt have a choice in product. Brand new. Hardly used. The control board replaced because it went bad 2 weeks after install. After one use it had it replaced and it went bad again. Used it once and again same thing. My mom unaware of the issue used the self cleaner as a favor. Well things went really bad. Because the temperature of the self cleaner was too much for the oven and explode and the inside glass shattered. This is not a product that you would want in your home or would recommend for anyone to buy. They do not stand by their product either. Please do not risk your familys life.

Its now Nov 8 and Ive been officially dealing with this issue since Sept 26. This washer was installed in a new home. After less than 10 loads, my washer stopped draining and I was left with a load of towel soup for over a week while waiting for a service call. I still have the same defective non functioning washer sitting in my home and have been unable to do laundry at home in all that time. So far Ive spoken with 2 customer service representatives. The first was incapable of scheduling a service call. She clearly did not understand how to operate the database used for scheduling. I was finally able to schedule appointment on my own but had to wait a week before the technician was able to come by. It was determined that either the latch mechanism or the mother board or both are defective from the factory.The second was just plain dismissive and completely unhelpful. I sat on hold for about an hour each time before getting to speak to a person. Ive also received two canned emails in response to my poor review of this washer on the Whirlpool website. They basically blame COVID for the delays and state the parts delivery should take 3-4 weeks. I was originally told 14 working days for delivery of the parts. We are already past both deadline with no end in sight. At this point, Id like the defective washer replaced rather than repaired. And for the record, this was a new washer (less that one month old) installed in a new house that now stinks to high heaven because slimy, scummy water that will not drain out has been there since September 26. Id really just like for someone at Whirlpool to honestly care about this and take a moment to address this issue.

I purchased Whirlpool Duet HT front-load washing machine with model #GHW9400PLO. After a year of owning the product, failure codes continued to appear. I have followed the direction under the troubleshooting page which said to cancel and unplug the unit. After doing this over and over, I finally took the top lid off to inspect the problem. A ribbon cable was torn due to the top lid rubbing against the lid and the drum. I called Whirlpool and this was not covered (go figure). I then asked for the ribbon cable and they said they cannot just supply the ribbon cable and that I would have to buy the user interface which is $191 plus a $35 core fee because they re-bill them. What a rip off. A ribbon cable from a computer store would only cost $10.00. After that repair the Micro Machine control went out which is code F11. Code F11 is all over the web because this is a defective part that Whirlpool should do a recall on but why do that when they can charge $310 plus, get this another $35 core charge because they re-bill them? If you are not mechanically inclined with these parts plus labor you could have bought 2 washing machines. But who in the world would buy 2 pieces of junk right?Bottom line is: do your research and buy from a company that will stand behind their product because Whirlpool will not! They know by the number of parts they ship out that that part should be recalled.

I bought a Whirlpool Cabrio Top Loader High-Efficiency Machine on March 20, 2013. 14 months later, it failed. When I called customer service I was informed the 1 year warranty had expired (I knew this already) and that all they could offer me was a $319 extended warranty to fix machine and guarantee covered future repairs. Luckily, I had the machine repaired at no cost to me after complaining to the sales people I bought the machine from the year earlier. They contacted their Whirlpool representative who had the repair covered. Now, 3 years and 11 days after purchasing it, it failed again. This time the machine would no longer spin out the water. Whirlpool offered nothing more than to give the website and special code for a discount on a new machine. After some haggling, they agreed to pay for 50% of the parts only, no labor. I argued this machine must be a lemon, as they have told me theyve heard no prior issues with this machine and that it would be reasonable to replace this machine. They refused any further assistance. So I threw this piece of junk away and instead, for $185, bought a simple rebuilt 15 year old Maytag washer with agitator, direct drive. Just a couple of knobs. No computer, fancy bells and whistles. I can say with absolute certainty that I will never purchase a Whirlpool product ever again. I also believe these machines are no longer meant to last like old washers (and dryers) used to.

I purchased a Whirlpool refrigerator in 2014. It is a side by side with ice maker in the door. About 8 month ago the ice machine stopped working. I called an appliance repair center and they diagnosed the problem as being the control board for the ice machine. After only 3 years this stopped working? I gave them to OK to fix it. A few days later I was informed that the part is on backorder for a few months. Well a few months has become 6 months and no part is available. I contacted Whirlpool and they called me and promised a solution, but then they never contacted me again. So it is almost 7 months later and I still have no ice. How can a relatively newer product break down and then not have a part available? Whirlpool absolutely does NOT care about their customers and does NOT back their products. Stay away at all costs.

We have been very satisfied with the way our dishwasher has performed over the years. It cleans the dishes well. It runs somewhat quietly. It doesnt seem to use too much detergent to get the dishes clean.

I submitted a complaint several days ago about my 3-year old Whirlpool Duet washer not working and costing $550 to fix. I decided to just replace it so my husband unhooked it this morning. We were going to to try to sell it on Craigslist as is. I pulled out the laundry detergent compartment to clean it because I had filled it with detergent and fabric softener the other day. The smell that came from inside the washer where the detergent is dispensed was awful. I looked inside and it was completely filled with mold. I had periodically run the clean cycle with bleach but apparently this did nothing. I am writing this second review to warn people about this. I am going to just trash the washer now and I hope this has not affected our health in any way. For those of you who are thinking about purchasing this washer or one similar, I strongly urge you to stick with the plain old top loader. That is what I am going back to.

I bought a Whirlpool Duet Washer and Dryer in September 2013 and washer is already broken. It leaks out the front of the front loading door (yes, I clean it as advised, including leaving door open to air dry etc). I am a retired senior citizen and my wife and I spend 6 months of the year in Florida so the washer has barely been used since we are barely home and its not like we are trying to wash load after load of heavily soiled items daily. I would not recommend this product at all!! The repair people said it would cost approximately $300 to fix and offered a plan to fix it for $350 with a 1 year warranty. Why should I bother to do either if I will have to do same after 1 year? This machine is barely used and broke?! The customer service people were not helpful and seemed only interested selling me the repair plan to fix what should not need fixing. So, to recap - I bought the machine in 9/13 then went to Florida from 10/13 to 4/14 (so it was used 1 month). Then, it was used from 4/14 until 10/14 (6 months). I returned from Florida this year in April 2015 and it started leaking in June 2015 (2 months). So, my machine has been used for a grand total of 9 months and it is already broken!!! Stay far away. Whirlpool should come and replace this machine for us for free if they care anything about customer service and senior citizens but clearly they do not. In Florida we have an old Sears Kenmore machine that has lasted for over 20 years!!

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

Safety issue with Dishwasher Model MDB6949SDH. Fire hazard! Strong electrical burning smell when using powerblast function. Waiting for some Whirlpool action but does not look to be too soon. Chat noted a report to be filed with safety department and will hear from them. No hear so far. Pick up phone Whirlpool.

Whirlpool Cabrio Washer - A total waste of money. My clothes are never clean. The low water system is rubbish. It doesnt work! Check out my pictures below. That is the result of a 63 minutes wash cycle. Dont buy this piece of crap.

I bought my Whirlpool Cabrio Washing Machine in 2010. I hate it 100%. I have never used bleach in the machine. I use liquid detergent only. 2 things happen every day: #1: When I wash a load of colors, I take them out when complete and there is dry white powder like substance over the black clothes. It looks dirty but it just got washed. #2 About once a week, I will pull something out of the washer and there is a bleach spot on it. The last item that this happened to was a $200 sweater. It went in the garbage. This should never of happened with an $800 washing machine.

Im so tired of the mold smell that never goes away, even after following their cleaning cycle many times over. I dont know what to do but I spent extra $ to purchase my washer and now this!

The home I bought a few years ago, had brand new Whirlpool appliances. The oven and range, work great, although it does take my oven seems like a long time to get to temperature. The size of the oven is great, has plenty of room to cook lots and/or large amounts. The range, works really good too. Its a glass top range. The glass is very durable, I find it does not scratch easily. Cleans up well by just using a good glass top cleaner. I do have one of the burners, does make a little noise if used but 4 years in, no issues out of the range or oven.

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

We purchased the Whirlpool Cabrio washer and dryer duet exclusive to Lowe’s in June 2011. I was immediately dissatisfied and went to Lowe’s. They told me I only had 7 days to return it. They dispatched a service man and he said it was working as it was intended to but I would never be satisfied. If I had dirty clothes from farming, construction, or mining, I should forget about it.” The washer is an eco-friendly model and all the clothes do not get wet. It wrings them out very tight and everything needs to be dried or ironed to get rid of the wrinkles. After 6 visits and lots of stress, I am returning the washer to Lowe’s and they will replace it with a different model. It definitely will not be a Whirlpool. I am very disappointed in the service and response I received from Lowes.

We purchased a Whirlpool Gas Water Heater (Model No. N40T61-343) from Lowes in the Summer of 2013. 2.5 years later, the water heater goes out as of 01/19/2016. Therefore, I contacted the telephone number on the side of the water heater in order to restart the water heater. We followed the instructions by pushing in the pilot button, as well the ignition button. To no avail, the water heater did not restart. I called customer service on Thursday (01/21/2016) to speak with a representative. She said that we needed another Thermopile and a Gas Valve replacement. So, who is going to put it on? It would cost as much as getting a whole new water heater. Therefore, we are going to Menards to purchase the Richmond Gas Water Heater. We had a Richmond once before; and it lasted from 1999 or 2000, until 2013.After reading all the reviews about this brand water heater (Whirlpool), no wonder people are complaining. Ladies and gentlemen, do yourselves a favor and not buy a Whirlpool Water Heater. The only thing that Whirlpool is good for is only their name. Their Water Heaters in particular are worthless pieces of junk. NEVER BUY A WHIRLPOOL GAS WATER HEATER AGAIN!!!

Whirlpool side by side refrigerator/freezer Model #GSF26C5EXB. LESS than five years old and the ice maker is not working! Bought at Lowes. Great service. Out of warranty now. Lowes sent a repairman and it has to be replaced. I called Whirlpool and they said sorry. THATS IT? Ice makers dont ever last five years now? Unreal!

It never seems to clean the dishes and it runs for 3 1/2 hrs. It is suppose to have all these Features but does a very bad cleaning job. I have used liquid soap, the cascade pods and the jet dry, still gives very poor results. Use to have a Kitchenaid that lasted almost 30 years - great appliance...

Awful customer service. We bought a washing machine in 2010 and it has shredded a ton of clothes over the years. I called customer service to see what they could do to help me with this problem. After about 45 minutes of trying to get more than a service that I would have to be responsible for, the supervisor offered me a new washer at a discounted price. I went online to compare and found out I could purchase the exact same washing machine at home depot & best buy for $50 cheaper. I called back to see if there was anything they could have done and they would not budge.Shame on you Whirlpool. You have lost a customer and I will make sure no one I know buys one of your products ever again. I cannot believe that you would not make any accommodations for us. We bought that washing machine with the intention of keeping it for 15 years. It has cost us countless amounts of blankets, shirts, pants, etc. I cant believe you wouldnt help us after all the money this piece of junk cost us.

Same as others, We purchased a Whirlpool Cabrio Washer and there is a bearing problem (which seems to be the common issue reported). The washer is unusable at less than 5 years of age. The repairman told us its a bearing problem and its common for this to happen to the Cabrio. How can an Whirlpool get away with selling a defective product?

I dont know who is the bigger idiot. The designer of this washer or me for not reading the countless bad reviews. I bought a Whirlpool 4.3 CU FT TL WTW5000DW machine on 7/19/2015. It does not come close to cleaning clothes. It now takes me three times longer to do laundry because I have to check every piece of clothing for any stains. These are minor stains mind you but, they will not come out unless I use something like Spray and Wash. My time is valuable, maybe I should drag my clothes to the river and beat them on a rock. Very disappointed.

In 2005, I purchased a Whirlpool front-loading automatic washer for $700 plus. The machine had to have repairs on it several times at my expense. Then in 2010, I had to replace it and spent another $700 plus on the same type of washing machine. Whirlpool would only discount $100 of the cost. The second machine three years later is now also needing repairs. I spent a total of over $1,400 in 7 years on two washing machines not including repairs and parts. It also took forever to find the parts, so I went without use of a washer for one month. I called customer service and said they couldnt do anything for me the second time around with them. I will never buy another Whirlpool ever! You would think a company would care about their customers but they dont. They make their stuff cheap and charge an outrageous price.

We purchased this washer and dryer new in 2011. Have repaired door to washer twice. New doors total cost $500.00 each time. Now it is cracked yet again and the dryer door has to be adjusted. The temp does not work right. Have to do minimum of 2 cycles for drying. Very unhappy. We may as well buy a new set of another make. Tired of the expensive repairs.