I paid ~$1200 for a new Whirlpool (French door top fridge and pull out freezer bottom) 7 years ago when I bought my house. I was so excited - and the appliance has been a problem from the beginning. It has always made a very loud knocking noise - even when it was new. I was told by the technician there was nothing he could do and Home Depot wouldnt help me with it either. My freezer has gone out three times - the last time was the day before Christmas Eve 2016 (a few days ago). I lost everything for my Christmas dinner that was in my fridge because that went first.Then when the service man came today, I was told it was the freezer that is causing the problem and everything had to be defrosted - plus they had to order a part that would take 3 to 5 days - so Im now going to lose everything in my freezer as well. All in all with the three service calls and the food I have lost probably amounts to around $800 - $900. I am so upset and cannot get any help from anyone. So, Im just warning you - NEVER buy a Whirlpool!

A disaster from start to finish. I would give it zero stars if possible. Purchased from Home Depot online in September, 2020. The first delivery was scheduled for October 11, 2020 at 7am on a Sunday. I spent hours on the phone trying to get the time changed. I was assured it would take place later. That didnt happen. The delivery service Temco called at 6:30a and refused to come back later. I had to make a new appointment. A week later they delivered the dishwasher, left it on the porch, refused to uncrate it or bring it inside the house, refused to haul away the old machine and stole the Dishwasher parts kit that I had paid for which delayed installing the dishwasher. After the machine was installed I discovered the machine did not come with a manual. I was told I had to download and print the manual.When I complained that I should not have to use my paper and ink to print a users manual after paying $800 for a dishwasher. I was promised a check to offset my costs. I was supposed to get a credit for my inconvenience but that never happened either. The first time I ran the machine using the one hour cycle water was all over the machine and I had to dry inside. I was told that I had to use a longer wash cycle so I did the second time. After 4 hours of washing, the glasses had a film on them, even though I rinse the dishes before putting them in the machine the dishes had some debris on them and water had still collected on the top of the glasses.Whirlpool sent a repair company out and the technician said motor pump and display control were faulty and it would probably be cheaper to replace the dishwasher rather than repair it. I was told I would get an email the next day telling me what would happen. I never got the email. During the week I called Whirlpool and Home Depot many times to complain about the faulty dishwasher, stolen parts and the promised refunds for my inconvenience as well as having to print the manual. Calling Whirlpool or Home Depot customer care will take hours and gets you nowhere. A week after the repair person came out I called the repair company to request a report as to what had been done and was told that they were coming back out the following Monday to fix the machine again. Monday, The repair technician came out and replaced the control panel but not the pump. The machine wont heat up to dry the dishes--the heating coil wasnt even warm after being on for 8 min. I am supposed to be contacted again for a 3rd visit!! I have a dishwasher that is faulty (read lemon) and Home Depot wont allow me to return it because their return policy is 48 hours after delivery. Whirlpool refuses to replace it unless the technician says it cant be fixed. Obviously, that will never happen. I should have repaired my old dishwasher rather than waste my money on this horrible machine. Whirlpool used to make fine products but those days are over. How does running a dishwasher for four hours saving energy? My old over 10 year old Whirlpool dishwasher was perfect until the pump broke. The dishes were always clean, dry and came out of the machine hot and sanitized. I am so disappointed in both Whirlpool and Home Depot.

Whirlpool refrigerators with bottom freezers have a major defect in a tiny drainage hole hidden inside the back panel. The hole easily gets blocked with bits of debris during manufacturing or with a few bread crumbs, then it freezes shut. Then water ends up all over your floor. You cannot fix it yourself as you have to take apart the whole freezer. The repair bill is huge. This will happen often. Check on the internet and YouTube to verify & you will see that this happens to everyone with a Whirlpool. Also your floor will be ruined if you dont mop it up every few days until the repairman arrives! Stay away from Whirlpool!!

I purchased this machine about a year ago and it is the biggest piece of garbage on the planet. The biggest problem is that it will not spin if the load is even slightly unbalanced. It does not clean the clothes. If you try to rebalance and spin the load, it adds more water and then gets stuck in a cycle where it drains and adds water forever. Do not buy one of these. I am finally surrendering and buying a different machine. A total waste of money.

We purchased a Whirlpool washer model WTW7500 in November of 2017. I found the clothes were not getting clean and also noticed that even after a full wash some parts of the clothing or sheets had dry spots! I checked all connections and called for service. As soon as the serviceman saw the machine he said, “yes, that’s a problem with those machines”. They are low water/water saving as per some American regulation and that’s what happens... you’re going to have to live with it. He also suggested running an extra rinse and using “deep water” function. I did this and it made very little difference except now a wash cycle for bedding is 104 minutes! Also, still had a big dry spot on my sheets!When I called again to Whirlpool they scheduled another repairman for a second opinion, turned out to be the same person with the same answers... I called Whirlpool again and was informed that my washing machine is working as designed! I argued that a washing machine is designed to wash and clean clothes so this one does not do what it is designed for... I spoke to the supervisor, she was actually just rude, also said I not had 30 days to make a complaint and I was outside of that, when I asked to speak to her supervisor she said there was no one above her although she denied being the owner of Whirlpool! (That’s my little joke). Anyway wish someone had warned me prior to this purchase.

I purchased all new Whirlpool appliances for my kitchen from Lowes about 5 years ago. The dishwasher was leaking water onto my hardwood floors after about a year. I figured out that the seal was pulling away on the lower left corner. I fixed that myself. It cleaned pretty well for about 3 years. Now its not cleaning at all. I took the lower spray arm off to try to clean it. Almost all of the holes are clogged with debris. (I clean the filter at least once a week.) I went ahead and ordered a new sprayer arm, maybe that will help.As for the rest of the appliances... After about 6 months, the freezer started filling up with water that then froze on the bottom and allowed water to pour onto the floor. The microwave handled broke after about a month. (They did send me a replacement handle.) The knobs on the stove are starting to peel. One of the knobs wont stay on, so I keep it in the drawer next to the stove. Overall, I am very disappointed in all of the appliances. This will be the last time I buy Whirlpool.

I got the works; the stove, dishwasher and refrigerator. I cannot believe all the BS you got to do to baby these appliances. If I had designed this mess... I would not be selling it. Every one of the appliances has a issue... the oven takes a long time just to cook toast. I would send them all back... but from what I have been told this is it. They all suck! I sure wish I had my older appliances back. I see the city dump in their future! I got the black stainless. Believe me I am not happy at all. The repair people have already had to fix or replace parts and I have not had this stuff for 30 days yet.

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

This microwave oven has worked well now for about six months and overall we have no complaints. My only complaint is that it has a cheap feel to it, especially when the door is closed...it creates a rattle type hollow noise....it just does not sound like it is well made. Time will tell I guess. The unit works well and heats fairly evenly. The cook options are plentiful but we rarely use most of them as we are usually merely re-heating food or coffee. The defrost cycle does work well for us.We purchased this microwave oven as well as a Whirlpool Range and Whirlpool French Door Refrigerator at the same time from a small Home Depot. Whereas that store had the microwave on display it did not have the other two on display and therefore we purchased them sight unseen....a BAD, BAD mistake. I have reviews for those two so I will say no more about them here. Thus, overall, we are very pleased with this Whirlpool Microwave Oven and would recommend it.

In the past 8 years, I have had to replace 2 Whirlpool Calypso washing machines and 1 Cabrio washing machine. All 3 washing machines worked great for the first 2 years. I purchased the Whirlpool extended warranty on all 3 washers. The first Calypso had 12 repairs done on it. Finally A&E repair service deemed the washer not repairable. Whirlpool replaced the Calypso with a new Calypso. Based on the problems with the first one, I again, purchased the extended warranty. Again, after the manufacturers warranty expired, I again had issues. After numerous repairs, A&E deemed the washer unrepairable. I contacted Whirpool warranty service and was told that they would reimburse me 75% of the cost of their choice of a Whirlpool washer! Since I have had 10 hand surgeries, I need a washer that does not have an agitator (hence the original Calypso purchase). The model that Whirpool warranty deemed as a replacement had an agitator and was also a much lower energy efficiency rating. I found that the Cabrio was a comparable replacement model and finally Whirlpool agreed to replace the washer at 75%. I was angry that they didnt cover the total replacement, but felt at least I got a totally new problem-free washer. I again purchased the extended warranty. I got the Cabrio in March of 2008. In April of 2011, the washer started getting rust around the bleach dispenser and also I would get UL code (Uneven Load). A&E tech came out and replaced a bearing. He said that the rust was not covered under the warranty. I asked how it was okay to have rust around the bleach dispenser if the washing machine is always wet with water. A month later, I was still having a UL code and the rust was getting worse. A&E came out again and said that even though I saw rust around the bleach dispenser, the rust was in fact underneath the tub and had eaten away at the parts. He called the warranty company to authorize repairs and the Whirlpool warranty company denied any more repairs on the washing machine.

Water heater model N40t61-343 - Why does a water heater fail after 4 years when there is a warranty for 6 years? Is this water heater an omen for Whirlpool? I have a wife who is terminal and I trusted the Whirlpool name for hot water. What are Whirlpool going to do about this water heater?

I will keep this brief because many of our issues on our 18-month-old washer are in other reviews. The anger I feel towards Whirlpool Customer Service and the logic they use in providing repairs on a “goodwill” basis are unbelievable. After a Whirlpool certified appliance repair person diagnosed our fairly new washer as requiring the entire guts to be replaced... transmission, bucket, etc., we were told the repair bill would be over $1,300! Are you kidding me... the washer only cost in the mid $500 range, and now Whirlpool is going to do us a big favor and cover that outrageous bill! I told the customer service supervisor to please give us a new washer and take away our broken washer and use it for parts (if there any good parts left in this miserable machine). His reply “thats not going to happen”. He used this phrase to us at least 20 times during our service call until I finally told him I thought his attitude was aggressive and demeaning. I refuse to be bullied by a major manufacturer for a substandard product.I can only warn you when considering Whirlpool (and every major appliance in our two homes are Whirlpool) that you should use due diligence in your selection. We paid extra to upgrade all our Whirlpool appliances in our homes and I will never make that mistake again. And don’t get me started on the white film that covers my dark clothes. They say I use too much detergent... not true. I am not stupid and understand the HE requirement to cut way back on soap.

My family has been without hot water for two weeks. We have the same water heater, we have been to Lowes where we were told the recalled parts were no longer available, unless we wanted to drive 3 1/2 hours to Arkansas to get it. Whirlpool wants to give me a free part for $36.00 worth of shipping and handling! All the local suppliers say I have to go through Lowes, or the manufacturer. I dont want to give whirlpool another dime. This has been a fiasco. How much more can a company disrespect their customer, than to make us pay for a faulty product replacement? It is unacceptable. This is ridiculous. It is December, and I have a family of 7, including a child in a wheelchair.

I have owned a French-door Whirlpool/Kenmore refrigerator for less than 3 years & all the lights start flashing fast when you open the doors. Anyone that knows anything about seizures know this can set one off. Turns out its a common problem with the LED lights & you have to replace circuit board at over $100.00 for the part, plus you may have to have it installed. Best to stick with a $0.99 bulb you replace every 5 years.

We bought a Whirlpool cook stove with a black top in 2009 and this year, in 2011, while cooking a pot of stew, the stove top burner began to make loud popping sounds. When I went to check it out, there was smoke coming out from under the pan and pieces of glass that had exploded out in small chunks. When calling the customer service line at Whirlpool, they told us that it was no longer under warranty and could not be of help. Their only explanation was that they would only cover a new stove top if it had cracked or broken this way when putting a cold pot on a hot burner. They said their technician could tell if this was why the shards of glass were exploded from the burner.

The appliances in my home range from a Kitchen Aid double wall oven, a DCS single wall oven (I have 2 Kitchens), 2 Kenmore dishwashers, a Fisher and Paykel refrigerator and 2 DCS counter-top stoves (all top of the line). No problems they are great appliances. On Dec.22, I bought a Whirlpool Duet. For 6 months, constant repairs and rebuilds were needed; new computer panels, pumps and new drums. They cant fix it. We have tried everything to get the Whirlpool Factory to fix it or replace it. So far, I have spent twice the original cost to fix the machine (but to no avail) and now you want me to spend another $500-$600 to try to fix it again? No more!

We bought the refrigerator end of November 2017 but didnt start using till February 2018. March/April stopped working completely. Since it was on warranty, we got repaired. End of December stopped working completely again. Few days after the warranty expired. We got few Whirlpool products with our order in November. Washer was already repaired too. We will never buy Whirlpool again!

Twice purchased washers Cabrio and both after 5 to 6 years break down showing f1, f2, UL codes. Shame on this company. They refuse to give us a particular time to fix it and have the nerve to charge us for the visit without fixing it first.

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

The washer is 5 years old and the dryer is about 12 years old. I have a Whirlpool Cabrio HE washer and a Kenmore Atlantis dryer. The dryer is relatively quiet and has 4 heat settings (including no heat) as well as multiple choices for the type of drying, i.e. wrinkle release, damp dry. The HE washer is noisy and a load of clothes does require a much longer time period than a standard washing machine. My guess is youll spend what you save on water usage for the electric power required to run this type of machine.

Whirlpool microwave oven a few months old stopped working. Customer service center not helpful with prolonged holds (>30 minutes), no response to email, and amazingly no response to live chat. The 800 number was busy at one point for over an hour. When I finally did get thru, there was no coordination with local repair men, and a factory delay on the parts. I am going on 6 weeks without a functioning microwave and 3 kids at home. Thanks Whirlpool.

Microwave model WMH73521CS-2: Microwave is approx 2.5 yrs old. This is the 2nd time we have had problems with door open and close msg appearing on display. We had to have door latches replaced once and again are having to have it serviced again. $100 for service to come out again, does not include cost of replacement parts. This seems to be a consistent problem with this model. We are not replacing the parts and are buying a different microwave. Definitely not Whirlpool. I called Whirlpool and was on hold for almost an hour and received no resolution to problem.

After owning the highly recommended Cabrio for only 2 years, I was told it would cost $300 for the motherboard!! I have always used Whirlpool but this machine is terrible. Water saving is not an option when washing clothes. Unless I use the bulky cycle, my clothes come out dry and smell dirty.

Sometimes, it doesnt get the dishes clean. I am not sure if it is the dishwasher or the detergent. I recently switched to Finish Quantum Max and it seems to be doing better. I always use the pots and pans cycle. Lots of features, most never used. For instance, china crystal, quick wash, rinse only. The size is ample but the interior design could be better. Solid black, looks good, Model GU1500XTL82.

Mine came new with the home I purchased 3 years ago and so far I have had no problems at all. The only drawback is that if it is on, you can hardly tell it is running so if you forget you might interrupt the wash cycle unintentionally. It does an excellent job on dishes and the stainless steel front is easy to keep clean since there are no mechanical knobs or switches, you can just wipe it down and be done in less than a minute.

Whirlpool Gold model WRS526SIAHOO - We purchased this refrigerator 10/2013 with all the matching appliances when we remodeled the kitchen. We moved our 1997 GE refrigerator into the garage. Now the computer board has gone out in the Whirlpool and we are back to using the 97 GE. The technician told me that he sees a lot of these boards going bad.

Whirlpool should be ashamed for making a terrible machine. It does not get the clothes clean and it is always breaking down. It is not worth the money. I have never ever had a washing machine act like this. I have been RIPPED OFF!!

I have a Whirlpool refrigerator and it is the 2nd one in 12 months. The first one the refrigerator was freezing food in the fridge part and thawing food in the freezer part. After several times a technician came to try to fix the problem and arguments with Whirlpool. They finally replaced the refrigerator. The new one is now doing the same thing. I am contacting Whirlpool tomorrow.

When I purchased my Whirlpool Cabrio washer and dry, I was told by the sales associate that this was the top of the line. I paid a higher price for what I thought was quality only to find out that this washing machine (WTW6600SW2) Serial number CU2973872 is in fact poor quality, made of components that are cheap, unreliable and made to last only as long as the initial warranty. Prior to buying Whirlpool, I owned Kenmore and had a washer and dry that raised four kids, now I own a Top of the line Cabrio that cant wash the clothes of two adults. I think it is funny that two days after the washer started sounding like a jet plane taking off during the spin cycle, I received your sign up for an extended warranty letter. Then I take the washer apart to locate the trouble and find it is a single bearing on the top of the drive shaft, but can I buy the bearing and replace it? No, I have to buy the entire outer tub and drive shaft. So a $10.00 bearing will now cost me $200.00. I am sure that helps your profit margins considering all you have to do is a search for Cabrio problems to find 350,000 hits, or to ask a professional technician and receive the reply that they are replacing 2-3 of these tub and drive shafts per week. I would recommend that Whirlpool tell its shareholders that you have compromised customer satisfaction to line their pockets with profits. If that was your intent then you have succeeded, however you need to also tell them to sell their shares now as you will have no return customers. Most corporations have core values that deal with safety first and then always followed by quality. I can say with confidence that your quality can be nowhere near the top five with this many problems with your top of the line product.

Oct 14th I walked down to our basement to find it flooded. Turns out the leak came from the solenoid that controls the water feed to our Whirlpool Gold Series refrigerator. Now, some $28,000 in damages later - floors/cabinets/walls/electronics - you name it. The repair company said that they replace these units a lot as it is simply a faulty design and Whirlpool knows this as this part is very difficult to obtain - too much demand. Well aside from the cost, the inconvenience, and the rise in our insurance rates the repair person said there was a good chance of the new part failing as well - it just cant take the water pressure as it is just cheap plastic. My advice - stay away from Whirlpool!

Beware to those who are in the market for a new washing machine. I am reviewing the product not the retailer. The lack of the agitator on the machine has left the consumer very agitated! I have called Whirlpool in the first year at least three times for them to come look at it and see the pictures of the clothes. It rips but the response basically is, “It cant be helped maam.” Here is what it does: When you do a load of shirts the sleeves tangle so much your clothes rip You can do approximately 3- towels or it won’t spin correctly. A load takes forever! Now I have been doing laundry for over 40 years so I know how to do a load and I have never been so disappointed in a product I could not return, why you ask because they say there is nothing wrong with the machine. Dont do it! So Whirlpool get a 0 star rating from me but I have to give it one for this review to move forward.

Whirlpool Cabrio - Our washing machine just started leaking water with oil underneath. This would be our third repair since purchasing this machine but it doesnt sound like a repair is possible or worth it. Its too bad we cant go back to the old models. They definitely lasted longer with no problems. Companies should make the older models bigger and forget about the front loaders and newer models without the agitators. Too much shaking in the machine causes too many repairs!

We purchased a Whirlpool refrigerator from Conns Appliances on 2/2/12. It worked fine until about 2 months ago. Then it started freezing food in the refrigerator. We called Conns, and they sent a technician to replace the thermostat. A couple of days later, it was still freezing food. So we called Conns again. They sent a second technician. He called Whirlpool tech support, and they told him to adjust the position of the thermostat sensor. A couple of more days went by, and food was still freezing. The problem had gotten even worse.I called the manager at Conns and suggested that we should consider replacement since the previous 2 technicians were unable to solve the problem. He sent a third technician. Tech #3 called Whirlpool tech support and re-adjusted the sensor. He said there wasnt a lot they could do and that if I wanted to get it replaced, I would need to call Whirlpool.I called Whirlpool Customer Service and explained everything that had happened. They told me they would need to send another technician. I asked why, since 3 technicians had already looked at it. She said there were different levels of service and they would have to send someone from their authorized service company, as if Conns is not authorized. I asked if this problem was common in this model of refrigerator. She said she could research that if I could hold, so I said ok. After being on hold for several minutes, she came back and said she couldnt find any record of this being a repetitive problem.I didnt have a thermometer, and I thought if I had more concrete evidence of the problem, then maybe they would replace the refrigerator. So I put a glass of water in the middle of the top shelf. Within 24 hours, it was frozen solid as an ice cube!Technician #4 came and called Whirlpool tech support. This time, they told him that this had been a problem ever since this model came out and they had a fix that had been on the books since day 1. So the customer service lady obviously lied to me. Technician #4 stuffed a piece of Styrofoam in the hole where the air comes from the freezer into the refrigerator and he re-adjusted the thermostat sensor. I asked if we could just replace the unit and be done with it, but he said we had to wait and see if his fix worked.I went to Ace Hardware and bought a refrigerator thermometer. Two days later, we had frozen strawberries, frozen lettuce, frozen milk, and even the meat and cheese were freezing. My thermometer said temperature was 32 degrees. I called Whirlpool back and insisted that they replace the refrigerator. They told me The unit was not authorized for replacement and they needed a 2nd opinion. I was very angry. I told them there had already been 4 opinions and a 5th wasnt necessary. I wasnt getting anywhere, so I asked for a supervisor. They transferred me to someone named Sue. Sue told me the same thing - not authorized, need a 2nd opinion. I told her that I work at The Mens Wearhouse and that if a customer spent that much money on a suit and had trouble with it, they certainly would not have to bring it back 5 times to have it re-tailored. I asked to speak to her supervisor. She said, Sir, my supervisor doesnt speak to consumers. I could not believe my ears. Where would they be without consumers? I was so mad I hung up on her.Later, I realized I had no options and called to request the 2nd opinion. I was told that the technician could authorize the unit for replacement. They also told me I couldnt get a technician for a week because their technicians were all booked up repairing their faulty products. I had no choice but to wait. I moved my thermometer to the bottom of the refrigerator to see if the temperature was the same there as on the top. The temperature there fluctuated between 28 and 34 degrees. I called Conns to tell them the story, thinking maybe they would go to bat for one of their customers. They told me this should never have happened and that the matter should be escalated to their home office and that a manager would contact me within 30 minutes. He never called.Two days after that phone call, I went to Conns to speak to the manager. I told him the whole story and told him that if Whirlpool would not replace the refrigerator, then I would have no choice but to contact Discover (my payment method for the original purchase) and dispute the charges. I pointed out that even though it should be Whirlpool paying for it, his store would take the hit if Discover reversed the charges. He called someone and told me a Conns service manager would contact me within 48 hours.More waiting. Technician #5 came. I told him he was to authorize the unit for replacement. He said he couldnt do that and that Whirlpool tells all their customers that just to get them off the phone. He re-adjusted the temperature sensor and left. I was livid. Now the problem went the other way. The temperature wouldnt go below 50 degrees. We filled an ice chest with food and ice and began living out of it. The Conns service manager called and said he would have to send a technician. This would be #6. I was very angry with the service manager and called Discover to dispute the charges. Discover opened an investigation, sent a letter to Conns (and maybe Whirlpool, Im not sure) and issued a credit to my credit card account.#6 came and re-adjusted the thermostat sensor. The next morning, he called to see how it was doing. The temperature was still around 50 degrees. He wanted to come and adjust it again. I told him to get the unit replaced! So he submitted paperwork to request a replacement. He called back and said that he felt sorry for us because he knew we had a 3-month-old baby in the house. Since the replacement had been requested, Conns wouldnt pay him to come again; but he said he would come on his own time, on his lunch break, and readjust the sensor in hopes that it would get us by while we waited for a replacement. He said it might take 3-4 days to get the replacement. I told him he could come, so this was technical visit #7. He adjusted the sensor. The next day, the temperature was still 50 degrees.I called the service manager at Conns to confirm that they had requested the replacement. He said the paperwork was submitted, that the home office would review it, make a decision, and that we should know something in a couple of days. That was on Wednesday. On Monday afternoon, I called him again. He said the paperwork wasnt submitted to home office until Saturday and that he was expecting to hear from them by end of day Tuesday. In the meantime, we were still living out of an ice chest.I had already determined that Whirlpool wasnt going to help me, and now, Conns was giving me the runaround. That afternoon, I was working on a project at work with a lady who was fairly new in our company. Turns out she used to work at the Conns home office and she knew people in high places there. She called a VP on my behalf. The next morning, I got a call from the VP telling me that I could get a replacement. I dont think I would have gotten my replacement if I hadnt bumped into the lady who used to work at Conns.I called Conns store, and they said a credit had been issued and I could come to the store and pick out whatever I wanted up to the amount of the credit. I knew I didnt want another Whirlpool. The selection was very limited, but I found a Frigidaire that I thought might work. Then they told me I would have to pay extra for an ice maker, even though I had bought the ice maker for the Whirlpool that was being replaced. I argued with the manager until finally he agreed to give me the ice maker, delivery, and installation.Yesterday, Conns called to tell me they were coming in the afternoon to install the refrigerator. They had the audacity to ask me what was the matter with the unit they were replacing! They did come and replace the unit. But wait...Thats not all! This morning, the ice maker had not made any ice, even after running all night long. Conns sent a technician today, and he said all of the parts were not installed and it was preventing proper water flow. He is coming back on Tuesday to install the missing parts. So we still arent done. I dont know if Im more angry with Whirlpool or with Conns. Whirlpool did not honor their warranty and Conns got stuck with it. But then Conns provided poor service too. I got stuck in the middle, and it still isnt fully resolved.

We bought this dishwasher only 18 months ago and its not worth the money we paid. We have had cheaper models that cleaned way better and didnt need as much maintenance as this one. We already had to spend another $410.00 in having the motor replaced in it!! When calling Whirlpool it only has a 1-year warranty and to have a technician come out just to look at it is $150.00. It is so hard to see in the part where you put the jet dry it doesnt tell you when its full or empty and no matter what it always leaves the dishes wet after. Our other dishwasher that was a way cheaper model always cleaned our dishes and never left any food on the dishes unlike this model and we even rinse the dishes beforehand! Look for another dishwasher to save yourself money in the long run!

I purchased a Whirlpool microwave at the end of November 2015. Since then it has needed repair 3 times. Now I am being told it is not repairable. Microwave is only 1.5 years old and Whirlpool would not stand behind its product and provide additional warranty service or even a discount toward a new one. When I asked to speak with a supervisor I was just left on hold, 20 minutes later I hung up! Poor customer service!

Bought a Whirlpool Gold stainless steel refrigerator and the thermostat didnt work after a couple months of use. Lost all the product in the refrigerator and freezer and whirlpool would not compensate us. They did pay for the $29 part because it was under warranty but still think it was completely their fault for putting a defective thermostat in it. Last night the relay on the circuit breaker stopped working and I again lost all my refrigerated food overnight. This time it is not under warranty because the warranty was only good for one year. So, I just paid $314.03 to have it repaired. So angry that I spent so much money on 4 Whirlpool Gold products when I remodeled my kitchen.

This microwave had been the best I have used for several reasons. One is the modern design that goes with our kitchen. Two: it heats the food very quietly and produced an even temperature through out the food. Three; The inside of the microwave is easy to clean out.

I love the French doors with the ease of seeing everything when you open the doors. The only thing I do not like about this unit is the ice maker. If there is more than one person in the household there is never enough ice. Also the ice gets hung up inside the ice maker often.

We bought this on sale but we're really glad we did. I was surprised how quiet it was while cleaning the dishes, insulation I guess makes it quiet. The wife also uses Cascade liquid dishwashing soap which seems to get the dishes really clean. Rinsing before we stick them in probably doesn't hurt, but overall, we are very pleased. The dishwasher has an adjustable rack which we've only used a few times and the start is easy enough for me to even figure out, sorry guys, but yes I do the dishes sometimes. Hope this helps. Good luck. Oh its model # is WDT730PAHVO.

I couldnt wait to get a front loader and hated it. As soon as I saved up enough money, I bought the water saver Whirlpool top loader. I love it! The clothes get cleaner and dont smell musty. Im very happy with whirlpool.

We purchased a Whirlpool Water Heater at Lowes - model no. FG15040T3NOV, serial no. 0434120861, product no. 0730267 & weve still been having issues keeping the pilot light lit. We purchased the bottom unit piece that Whirlpool said would fix the problem but weve still been having problems with the pilot light going out. The water heater isnt under warranty anymore, so last night was the last straw & we finally decided to get another water heater that wasnt a Whirlpool. Ive done a research on the internet and found out that a lot of consumers are still having this problem to this day.

I have a Whirlpool 33 inch wide Side by Side refrigerator. WRS311SDHM. This is the worst refrigerator I have ever had. Temperatures are inconsistent. It is less than a year old. Initially, I stored the big container of spring mix lettuce on the bottom shelf of the refrig as it wouldnt fit in the crisper draw. The temp setting in the refrigerator was set to ideal. Oddly though, in the freezer, ice cubes were melting and refreezing creating a massive frozen block. So, I raised the temperature in the refrigerator, but kept the freezer at coldest. However, I noticed that when I set the refrigerator to a warmer setting, ice cream became cold soup despite the coldest setting.I called Whirlpool and a service technician from Georges Appliance in New Providence, NJ came to my home (of course I had to take half a day off from work). He stuck a thermometer in the freezer and said, its working fine. While at my home he called Whirlpool who said that if lettuce isnt kept in the crisper drawer it will freeze (silly woman, dont you know that?) and ice cream will get soft in the freezer if the temp in the refridge is warmer than ideal. So, it seems I can have lettuce or ice cream, but not both. Okay, so I put the temp back to ideal, bought smaller packs of lettuce that would fit in the crisper draw and called it a day. Nope....lettuce and anything else in the crisper draw freezes too. Wilted, soggy lettuce is so nice in a salad and frozen baby carrots can break your teeth.I have been on the phone with Whirlpool executive dept several times. They offered to have another service company come out to look at the refrigerator. This repair company would not give me a 4 hr time frame until the day before the actual service call. This might be okay if you work from home or are retired, but this is not my case. I opted to not have them come. This is my last Whirlpool product. Since KitchenAid and Jenn Air are owned by Maytag/whirlpool, my other options are LG, Samsung, GE or Sub Zero.

I had a Whirlpool washer for three years that I bought at Sears and it started making a noise. I called Sears repair and they said it was the bearings. Would cost 600.00 dollars. The machine is still running making a noise are there more in a machine. I will never buy a Whirlpool product. I just lost my husband and I cannot find the bill but I am calling Sears tomorrow.

Dont buy. Purchased over the range microwave. Service order less than a week after install. Heats unevenly. Burns center of bacon consistently without fully cooking ends. Popcorn pops half the kernels yet Whirlpool says nothing wrong with product. Well within 1 year warranty but had to pay for service call cause Whirlpool determined microwave was operating as manufactured. Laughable! This company does not stand behind their product or their customers. Never again will I purchase a Whirlpool product.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

We have had a Whirlpool dishwasher for about 2.5 years and have been happy with how it cleans dishes. About a year ago we replaced our counter top and in the process had to adjust the bend in the mountain brackets that attach the dishwasher to the underside of the counter. This requires flexing the thin piece of aluminum at the perforated line. In the process, one of the brackets snapped. The other was barely still intact and broke several months later. I tried jerry-rigging them, but eventually decided to replace them and called Whirlpool customer service to ask for replacement parts.Unfortunately, Whirlpool wanted to charge me $10.50 apiece and another $9.00 for shipping and handling. These parts could not cost more than a few cents apiece. I was shocked that they would charge me $30.00 to replace these flawed parts. Never have I had such and experience with any customer service department. The three people I spoke with were all rude and unapologetic about my situation. Two blamed it on the install...Ive installed plenty of dishwashers and never had any problems in the past. Even if it was a failure on my behalf, the simple replacement of the parts for a reasonable charge would have been fine by me. I told them Id be happy to pay a few dollars and to pay the full shipping fee (which was also high, in my opinion), but they refused to meet me halfway. I can only think that this is part of their business plan...make dishwashers with sub-par parts, and then over charge for the replacement parts when they fail. Well, I re-upped my jerry-rigging efforts and have improved the engineering of the faulty part. Save my $30. But Whirlpool will never again get my business and Ill be sure to steer clients and friends away from this brand as well.

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

My model # is WTW4800BQO. Purchased 05/20/14 and, under warranty, had repair come several times and they finally supposedly replaced the brain of machine and said nothing further could be done. So all this time I operate the machine manually - timing everything from wash to spin. On all cycles I have to manually - actually turn off machine when first wash is completed and reset to rinse and spin otherwise it only partially fills and drops the water right away on the 1st rinse (besides also dropping water on 2nd rinse). Also I came home one day, after completing a wash load earlier, and found the machine filling up with water automatically so now I always have to be sure the machine is unplugged when washing is completed.

I wish I could give negative stars! My Cabrio Model #WTW6600SG2 sounds like a jet airplane on the spin cycle (this started 2 months ago). Now, Im getting the UL error, its not an an uneven load!

This ref model # wrf736Sdam13 is less than 6 months old. The doors have never lined up. At the top is a 3/4 gap and it is 1/4 at the bottom. This is a side by side. Sometimes the left door will open on its own. If you stand to the side and look across the front, the left door sets out about 1/2. My wife and I have contacted whirlpool many times and they will not do anything. I am ready to get another ref and get what I can for this piece of JUNK. We built a new home and purchased all whirlpool appliances and do not like any of them. Will never buy whirlpool again. Very dissatisfied with all – RANGE, DISHWASHER AND THE VENT HOOD. PS, the vent hood sounds like it is crushing ice when you cut it on. Very, very DISSATISFIED with all of them.

Bought the hot water heater, installed it. It leaked from bottom. Whirlpool warranties it. Replace it with new heater. It too leaks. I Google problems with Whirlpool hot water heaters. Found over 1500 complaints.

Whirlpool Gold microwave quit heating after little use. We moved in house one year ago, microwave 6 years old. Spoke with Timena customer service rep. She took my model, serial info and clearly explained this model had defects and they would replace for free even though 1 year warranty was up. Delivery staff would call within 24 business hours. After 4 days I call back and get Mia rep, she claims I was disapproved for new unit after all?? I spoke to 2 supervisors above her Karin in Tennessee, and another. They claim I was mistaken??? I said, “Look up the recorded call and you will see the message is clear... They acted shifty and claimed I should buy a new starting at $1399!!! They would consider small discount?? Their rep was clear at first then they failed to back her up. Terrible customer service. Lied etc. Never buy Whirlpool!!! They are cheap and don’t stand behind reps. Awful company!!!

After many phone calls and letters to Whirlpool about the AquaLift cleaning system in their new stoves, that does not work at all. I finally spoke to someone at the corporate office with a brain! I am happy because Whirlpool refunded my money and removed the stove. That was the outcome I was looking for as this new steam clean thing of theirs does not work on a dirty oven. Hopefully, they will work on improving these stoves and restore consumer confidence once again.

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

I just bought a house that has one of these ranges, and it was getting the F2 message. I found the problem. There is NO ventilation behind the electronic control so when the oven heats up, the control board gets too hot and throws the F2 code. That would indicate a bad temp sensor or bad board, but really its the heat shield on the back. Ive removed the metal plate from behind the control panel and it works fine now. Im considering drilling some vent holes and adding some insulation behind the control.

I was doing a routine refrigerator cleaning and the glass I was cleaning absolutely shattered all over my kitchen. Shards of glass are everywhere including my disposal. I called Whirlpool and talked to a customer service rep. Of course, this is not under warranty. So I asked to speak with a supervisor. All I could get from her is Sorry, youre disappointed. We can replace that part for $87.71. It has taken me over two hours to clean up all the glass. I wouldnt be upset if I had mishandled the glass, but it broke when I was drying it with a towel! I’m wondering if anyone elses glass shattered in the same fashion.

Very dependable. Like the steam clean function. Love that it is front loading. Like that the machine has windows. The functions for towels is a plus. Time remaining convenient. Machine is very good looking.. A big plus is the choices of many different functions, many that I have not yet used, but are available too.

When we bought our house the Matching set of Whirlpool Cabrio Platinums came with it as they were new. I decided to keep them and sell my LG Troms.Absolutely the worst mistake was keeping these Whirlpools. Who in their right mind would consider a washer with no agitator a washing machine? The clothes just sit and do nothing. They don’t get clean at all. Its a complete pile of useless junk and the person or persons who engineered it shouldn’t even be in charge of designing birdhouses.Whirlpool themselves should be ashamed to put out such a pile of garbage to the consumer. Our house came with all new Whirlpool appliances and we are going to replace them all and never give Whirlpool a look again. Whatever you do don’t fall for the shiny unit, slick salesmen. Because all youre going to get with Whirlpools washer is all talk and zero action. Thanks for the not so clean clothes Whirlpool. The local laundry mat thanks you when I need to actually clean my clothes.

My house was built in 2004, therefore the Whirlpool water heater was installed in June 2004. The water heater broke down (It flooded my garage) in 2007. I didnt have to pay for the water heater at Lowes (It was under Warranty), but I had to pay for the delivery and labor. Now, I had to call customer service, because the Whirlpool water heater installed in 2007 has problems too. The pilot light would not stay lit. I have to pay a certified technician $180, just to come to my house to fix this problem, when this is a recurring problem, with this Whirlpool water heater that was purchased at Lowes. (The heater has a six-year warranty. Not sure what this means if the product is defective to begin with). Im very disappointed with this product. It has too many problems, and I have to pay for a defective product. I would stay away from Whirlpool if I could.

I was a salesperson for GE for years and thought that they made the best washer for several reasons, but eventually had to purchase another washer which was a Whirlpool. Have been very pleased with my choice and would purchase a Whirlpool again. Washer is 14 years old.

I Bought the Whirlpool Duet Steam Mod#: WFW95HEDC0 in 2015. I have always wondered how a machine can get clothes clean with less water but liked the idea of the energy star and saving water. However, I found that I was right and the clothes do not get very clean. They do not even get all wet hence the dry feeling when they are done. I just recently got a little frustrated at having to rewash some things by hand afterwards. I started to pretreat and wash out stains by hand beforehand. That helped some. I finally stopped the machine after all the water was done filling it and it tumbled a bit. It looked like it was wet from the window but when I dug through the clothes I pulled out a t-shirt that was almost bone dry. Some of the other thicker clothes like jeans etc. had a lot of dry spots too. This is why the odors don’t come out and why spots and lines are left where the dry meets the wet. There just isn’t enough water get all the material wet. I then proceeded to pour a pail of water in to get all the clothes wet. When I started it back up, it drained some of the water and I still had the problem. So now I get all the clothes wet in the sink before I put them in the washer. It’s amazing how clean they got and they didn’t have the body odors either. I think this machine would be fine if it could be reprogrammed to add more water for cycles. I know that would change the “Energy Star” but this water saving idea is bogus if we have to rewash and add more water to the cycles. At this point I will be looking for a new machine that doesn’t have the energy star but allows me to adjust the water myself. I do not trust these machines anymore.

Six months after purchasing my Whirlpool Washer model number WTW5000DW0 I would hear what sounded like rocks in the bottom of spin drum during spin cycles. Then noticed it was taking longer for clothes to wash and sometimes the water did not completely drain. Called for Service under LOWES warranty (the worst people to deal with). Tech comes removes a penny and dime and tells me that is the problem. Leaves. 45 minutes after he leaves there is the noise again. Call and set up for this Service Company to come back. Even though they went out of business prior to the appointment Lowes Service would not listen to me and insisted I stay home ALL DAY for someone who did not show up. Repeated calls to the Service Company resulted in nothing - phone disconnected.So finally after much frustration I am given new appointment with new Service Company - PARRISH. Tech comes in here five minutes and wants to know the sound, I explain. He checks out the unit and tells me it is a major problem and the part and labor will be costly. Best if they just replace the machine. His added comment - I see a lot of this. So if this machine is such a problem why was it not recalled? I am getting a replacement as I have warranty and machine was not a year old when problem started. Lowes Service Contract is another problem but I will deal with that later.

Most dissatisfying experience with Whirlpool. In 2013 I bought a stackable Whirlpool washer and dryer. Everything worked well for two months, and then the washer started having problems. The washer memory board unit (MBU) needed to be replaced. This was done under warranty. One and half years later I started getting the error F07 which means an electrical problem. I called Whirlpool and they told me a technician would cost $85 for a service call. I delayed the call until today.The technician came, did a diagnostic and then advised me that I would need a new MBU. The cost plus labour amounts to almost the cost of a brand new washer. To add insult to injury, Whirlpool advised the service call would cost $89. (They upped the price since my last call.) You can imagine my shock when the technician told me that the $89 covers the first 15 minutes. I paid $133.34 for one half hour diagnostic testing and to be told I need a new MBU which is on back order for at least 6 months!!! My recommendation is - NEVER BUY any Whirlpool product ever.

The unit I live in is at **. They purchased it in Nov 2011. The washing machine worked for 2 months. Now, it has to be dismantled at my home and take a day off. I would like a replacement. The Dutchgate is still being developed. They purchased at least 60 at this point, there is no reason not to give me a new one instead of having two techs dismantle the machine in my new home for 4 hours and a day off of work. Model WFC7500VWl, serial CD13528709. Please try to assist me.

Wish I had done more homework before I purchased a Cabrio washer and dryer. The washer uses so little water that I sometimes find dry spots on clothing when I take it out. How can it possibly be clean if it doesnt even get entirely wet? I now pre-rinse all of my underwear before putting it in the machine. I know the instructions say not to put in wet clothing, but if it breaks sooner, Ill get to replace it sooner with a more traditional model. I always use the lowest spin speed - anything else makes my clothes hopelessly wrinkled. I like the large tub for washing blankets and comforters. Thats about the only advantage I can think of. The dryer sensor quite often goes off after about 2 minutes if I use any setting other than the delicate or timed features. Ive had the machines for 2 years and had the dryer repaired once under the extended warranty I purchased. Very disappointing purchase.

The washer has rust under the rim in the inside - also the paint is bubbling and peeling under the rim of the washer. I contacted Whirlpool and was told that is a cosmetic problem. There is no warranty for rust or peeling paint. I will never buy another Whirlpool washer. I paid over $700.00 for this washer and I dont think I should have a rust problem after 5 years.

WTW4950XW2 - I purchased My whirlpool washing machine wtw4950xw2 from best buy in 03/30 2013 and it just stop working after 3 yrs. The manufacture warranty was only good for 1 year. I think companies does that on purpose because they know these new equipments are not going to last. I think before they use to have at least a 3 yr or better warranty on appliances. First it started making this loud sound when on the spin cycle, so I had a repair guy come out. He told me that the bearings needed replaced so (how does bearings goes out in 3 yrs). I asked how much will it be to replace parts/labor. The Parts cost $250 and the labor is $200. I might as well buy a new washing machine. I am so disgusted with this machine. My previous Whirlpool, which was not the new modernized, I had for at least 12 years and also I bought a whirlpool dryer. My Dryer stills works after 15 yrs. Im going to try to hold on to the dryer until the long haul. I wish I just would have gotten my old washing machine fixed. Now Im looking for a new washer and I wont be doing a whirlpool or anything with a push to start - just a plain old agitator, no sensing mechanism, just basic.

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

This washer has no agitator. Drum will shake back and forth while load of clothes will stay in the same place sliding towards the opposite direction of the movement for 20 minutes. Clothes are not turning, no going up or down, just staying still and not getting washed as expected. Baseball cap and construction worker jeans didn’t washed as it should have been.

Whirlpool Washer WTW8700EC + Dryer WGD8700EC. Bought to replace a 35-year-old Whirlpool set that is still working and had no repairs in that 35 years of ownership. Gave to family member and its working well. Was not a cheap item but well worth the money. It performs beautifully. I chose Whirlpool. It is a proven brand with a long history of reliability. When I bought my last Whirlpool, I bought the top of the line model washer and dryer. They say you get what you pay for and that holds true in my case as has with many others who believe it! So this time I did the same thing and bought the best top loader they had. It has many options I still need to learn. I just use it like the old machine and dont need to worry about types of fabrics or making mistakes. Just follow the instructions for detergent and softeners and all is good. This machine cleans as great as the old one without beating the clothes to death. New agitator design keeps from paddling the clothes, so I dont need to use the gentle cycle or medium to preserve the clothes. The dryer I can say is most efficient as I noticed it took far less time to dry, and notice a small drop in my electric bill and gas bill. I think this will be my last machine ever needed. I do take care of my things and I do clean and polish my machines, they are an investment like a car or house. Front loaders have a lot of problems with leaks from the doors. Will stick with top load only!

After 7 attempts to fix my 6-year-old Whirlpool Front Load Washer (original price $991.00) I had to trash it. Then I stupidly bought another Whirlpool Front Loader (WFW75HEFW) Feb 2017. It has not worked properly since day 1. The clothes come out dripping wet. At first I thought I was doing something wrong. I tried every cycle, limited amount of clothing and ran additional spin cycles to no avail. Finally I gave up and called for service.Whirlpool is very much aware that a number of their machines came off the line with defective spin bearings but they wont admit to it. Instead I am expected to have it repaired! It involves the entire inside of the machine being rebuilt. Its a 2 man job that will take 3-4 hours.This is totally unacceptable and it is obvious Whirlpool does not make a quality product nor do they value customer satisfaction. DO NOT UNDER ANY CIRCUMSTANCES PURCHASE A WHIRLPOOL WASHER. They are difficult to work with and I for one will never purchase or recommend any of their products. I purchased this washer from Home Depot and now my only hope is that they will honor my intention of purchasing a non-defective product. If not, I guess Im in for another miserable experience with a Whirlpool product.

Whirlpool under-counter dishwasher (model DU1345XTVB0) was purchased 14 months ago. Upper rack plastic adjustable wheel rack is broken. Will not replace. Dishwasher has probable design flaw with wheel positions causing overhanging load to put extreme stress on outer two wheels. The design was done to save money instead of having telescoping rails as most dishwashers do. Explained this. They will not even send a part. Many other Whirlpool dishwashers use these parts. Probable class action suit material.

I have had my Whirlpool gold series dishwasher for approximately 10 years and it still does a great job washing my dishes. Recently, I found out if I forget to put a dish into it I would have to start the dishwasher all over again rather than it taking up where it left off. Also, the interior is badly stained and unable to clean it.

My Whirlpool Cabrio cannot wash sheets, blankets or any of this size. It balls up in the middle and form a bubble and only part of the items is washed and washing powders are trapped. I have purchased more sheets in the past 4 years than I have in the past 45 years of doing laundry, because the washing powders are not washed out. I wash on second rinse also, never fails and it still does not get all of it out. The clothing gets off balance if it was more than 3 small items. I have a leveling tool that I put on it often to make sure it is level. It’s something within the machine. I will never, never, never purchase any more Sears’ product. If anyone has jury-rigged this machine to work, please let me know. Sears has refused to help me, even today.

LEDs on control panel started going out in four months. It’s a 400$ part. Under warranty but what’s going to happen in another four months? The range I had from the eighties was still working. You don’t get what you pay for anymore. Just excuses.

I purchased a Whirlpool upright freezer from Sears 17 months ago and it stopped working. I find the warranty is only 12 months. I contacted Whirlpool and they left a message on my answering machine that they would not be allocating any funds for the repair of this 17 month old freezer. I spent in excess of $600.00 and I am highly disappointed. I would never buy another Whirlpool anything.

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

We have several Whirlpool products in our home currently and have been very satisfied with their performances. We have their fridge, stove/oven, microwave and dishwasher, all of various ages. We purchased them from a local big box building supply company and installed them our self. The installation directions are clear and simply for the average D-I-Yer. We would recommend Whirlpool to everyone shopping for these home appliances.

This is Whirlpool model MVWP835DC2. I bought brand new. Recently used about once a week. Got an alarm that indicated no communication to core unit. Talked to Whirlpool service and unit is out of warranty (20 months) and advised I should use authorized service company to come and diagnose. This took 2 weeks. Service man came, washer did not power up. He quoted that repairs would be $750 and not worth it, buy a new one. I went on internet and found YouTube videos that showed how to diagnose and fix. I called Whirlpool for new console, $350 and one month. Went to parts house and got part for $250. This fixed problem.I have a few problems with this machine and company. 1) This now turns out to be a known problem with these machines. The console fails. I am not sure how this is going to last 30 years. 2) Service man took nothing apart and could not diagnose problem with no power. He quoted $350 for the console and the balance for the core. He was guessing or pulling a scam. Take your choice.3) Part not available from Whirlpool because so many are failing.Thanks for making a great product.

I have used my new Whirlpool range (D-MGR865OES) about a dozen times and the damn thing is going to catch me on fire. I cannot reach the pans on the back burners without rubbing the knobs on the front and turning on the front INFERNO BURNERS AT MY ARM. I cant reach the matching microwave above either. The front inferno burners start on high then can be turned down. It happens every time I go near the thing. Either I inadvertently turn on the fire or just the gas a little and dont realize it until I smell the strong odor of natural gas. Tons of other problems, but this is the worst of all. I called the manufacturer and they call it Buyers remorse and wont give me a credit back. Tim at Freds Appliance just never returns my calls for a manager to call me. I WANT A DIFFERENT RANGE. Buyers remorse? You betcha!!! Never Freds Appliance or Whirlpool again. IF I GET BURNED I WILL PROVE IT IS DANGEROUS IN A CIVIL LAWSUIT. The manufacturer stated on 5/6/16 that there is nothing wrong with the design of this range. I do believe that the other comments are true and my salesman Tim at Freds Appliance lied when he said that the star score was not for the model I was purchasing. They will say anything to get your money and then disregard any further communication. I bought a full house of appliances at Freds Appliance. They know I wont be buying again for 10 years. How do they stay in business?

We bought Whirlpool Frontloader Washing Machine not over 1 month ago and it started to malfunction showing Ed1 error on its display. We contacted the service center and it was taking too long to have a visit from a technician. Then the technician, who also installed the unit came and checked the unit. He called someone from corporate office or from support team to ask what is error code Ed1 and overheard over the phone that this is a known issue on the brand. The technician said it is possible that unit will be replaced or only the motor. I contacted the brand support thru Messenger and requested to have the unit replaced, because again, the unit is not over 1mo old.I was advised it is not possible as replacement of unit is only applicable when the issue happened within seven days of delivery. STUPID ISNT? Policy is something unworthy for a product that is over 30k. And again, unit started to malfunction not over a month after it was first used. I would say we pretty much took care of the unit, we only use it twice a week. Placed it where it was perfect to put. Followed every advice given to us by the technician who installed it but still, it malfunctioned a few weeks after we started to use it. I am ashamed of the brand itself, we should have chosen Panasonic or Samsung instead not a dumb brand like Whirlpool. I certainly do not recommend the brand for a washing machine unit. Frontloader is a crap.

I purchased a Whirlpool Gas Range from hhgregg July, 2013 and the oven was non-operational within 4 months. Since then Ive had 4 repairs on this lemon of an oven. I purchased the extended warranty plan through Assurant and, fortunately, have not had to pay a dime for these repairs, but I should not need to keep repairing the same parts continuously. Either the replacement parts are bad or the service technician is terrible and doesnt know what hes doing or Whirlpool makes such poor products that they are not meant to last. There is NO lemon law for appliances and the decision to replace appliances is the decision of the Assurant Warranty Co & they won t replace it and even if they did it would be with a used refurbished gas range. Why would I want someone elses refurbished piece of junk when I already have a repaired piece of junk?!

I love this stove! It is nearly perfect. I wish it was easier to clean the glasstop, but I imagine that comes with any glasstop stove. The stove is easy to use, and I love the cooktime option. My only complaint is that the timer is very quiet, and when it is a timer while something is cooking, it only beeps once. If its a timer when nothing is cooking then it will go off repeatedly until you turn off the timer.

I bought this Whirlpool Cabrio washer three and 1/2 years ago and the assembly which is basically the transmission and the assembly which is the agitator is out! Needs replaced! This is complete crap! The new parts will costs over $500 bucks plus labor! Ridiculous! My last washer which was a Maytag lasted me 20 years! What a piece of junk! Now I have to. It a new washer! No thanks to you Whirlpool! I will never buy another Whirlpool appliance again! Neither will my family or friends!

I purchased a Whirlpool dishwasher in December of 2015. It has had very light use, and today I found out the motor needed to fix it (it does not wash the dishes) is going to cost almost $500. Whirlpool used to be a very reliable manufacturer. Obviously, those days are gone!

Its an IKEA double wall oven. Top oven is convection, bottom oven is regular. The cost was half of what a single wall oven was at other stores. It is very simple without a lot of fancy timers and extras. Its great for cooking a very large meal when you need two ovens or have recipes that need different temperatures. I was able to shop entirely online to the store in another city and have the wall oven delivered for minimal charge. I dont mind paying more for better quality, but it seems increasingly hard to find. I purchased my no-name double wall oven from IKEA in 2010 for around $1000. That was almost half the price of a name brand single wall oven. Apparently the oven is made by Whirlpool. Self clean option works well. You cant beat it for putting on a great big meal where items require cooking at different temperatures. Both ovens are full size so you could cook a giant turkey and a ham at same time. Never had a problem with it either.

I have the top load Whirlpool. Its very roomy for my covers, rugs & towels. It has a setting for me to just clean my washer or if I need to just rinse it. It has a cycle just for that. Or if I need a quick wash or a just cold water wash it has those cycle. When my cycles are done it makes a cute jingle sound to let me know its done.

I purchased a Whirlpool cook ceramic cook top for our new kitchen. The very first time I made something (it was lentil soup) something stuck to the cook top. I have had a ceramic cook top before for 18 years - never had a problem until the whirlpool cook top. I cannot get it clean. I have tried everything! Such as stove top cleaner designed for whirlpool cook tops ($22), other cook top cleaners, the single edged razor, a scrubby sponge, steel wool, I even resorted to furniture stripper - NOTHING has removed this spot. I am ready to throw out this new stove top! What a huge disappointment this Whirlpool product is.

In 2008 bought cheaper Whirlpool washer, had to return it to Lowes. ELLL DUMOH (me) buys yet another Whirlpool Washer from Lowes; a Cabrio. The Cabrio ONLY worked 3 years, and started having problems with not emptying or just continuing to drain and beep. The Whirlpool Customer Service lady is pitiful. Yeah... I can SELL you another set of shock absorbers... that might help. I can SELL you a recirculating pump or a drain pump... Pitiful, sorry attitude. Goodbye Whirlpool.

I bought all new Whirlpool appliances for my house. After three years, the dishwasher is now broken and the washing machine is now broken as well. The refrigerator has had service two times in the past three years. The only thing that works is the stove that I bought. Whirlpool is all junk.

Weve owned a Whirlpool Gold Series Dishwasher for about seven years. There has not been a year that has passed that we have not had to place a service call with a local service provider. (Each service call costs $85.85.) The upper tray has come off the tracks more than 10 times. The drainage mechanism broke the first time we used the dishwasher. The fuse box (which is amazingly a self-contained, enclosed, black box) has blown twice, has to be completely replaced, and costs over $180. The second time it broke, I ordered, paid for, and had delivered the replacement part only to find out that the broken part suddenly started working again. (I guess Ill have the $180 part for the next time it breaks.) To suggest that this product is junk is an understatement. It will be replaced very shortly.

I have been using Whirlpool products for quite sometime. I had bought a 3 door refrigerator (Protton) about 2 years back. However I am noticing that of late, the vegetable drawer does not cool to the appropriate temperature. The vegetables as a result are spoilt. I am unable to understand what to do. I have checked with the other temperature settings and they are all in the normal mode.

We have had a Whirlpool hot water heater for 4 years now. Every three months something has to be replaced on it. Customer service does nothing to help and when we called Monday about a replacement part they told us they could no longer sell parts for that specific heater due to it being in a double wide. I contacted several more people and found out that heater was fine; all we needed was the part. The customer service woman was very rude and not willing to help at all. I told them we don’t have the money to keep replacing their piece of **. I ended up having to order yet again another part that was just replaced 2 months ago from Lowes. So after being with no hot water since Monday, now on Friday it is fixed, I wonder for how long. We do not recommend Whirlpool for nothing and will never buy a piece of ** from them anymore. We have a Whirlpool refrigerator that is causing us problems. I hope to soon get different brands in here to replace what Whirlpool can’t seem to make accurate.

Love my new fridge, not in love with the icemaker though. Every couple of days I have to reach in and scoop the ice off the little shelf in the back, or else it will quit making ice. The ice cubes block the arm from coming back down to trigger a refill.

Whirlpool Cabrio Washing Machine F1 code - We have had this washing machine for over 6 years now, and ever since our 3 year warranty time was up, the washing machine will only stop, and display the F1 code as soon as the wash cycle has completed, with 23 minutes left. To start off, with this problem, it is causing me more water, and electricity that should not have to be wasted if the machine worked properly. I called the place where I got the machine, and was told to give Whirlpool a call. I did this, and was told that there was nothing that could be done, and if I would like to schedule an appointment for a tech to come out and work on it, they could do that. YES, I would have to pay for it. Needless to say, the washer has been doing this for over 6 years, and if there is a way to get it fixed WITHOUT having to pay for the repairs, that would be wonderful.

Cabrio poor design - My number one issue with Cabrio is that it is destroying blue jeans. About 7-8 pairs now. It simply rips a hole in the leg. Also, sometimes clothes arent wet, usually not clean.

I purchased this set in November 2013, it is now October 2014. I made the same mistake as many others have made (according to the reviews that I have read on this site). Because I have owned Whirlpool brand appliances before - including washers/dryers - I assumed this new HE machine set would be every bit as good + quality. Unfortunately, I did not do my homework!Everyone is right - this Cabrio HE washer/dryer combo is nothing more than expensive JUNK!. My complaints are all the same as everyone elses: the clothes do not get clean, soap residue remains on clothes, the clothes even have parts of the articles come out of the wash cycle dry not even having had the water touch the articles in areas! The dryer has been repaired once already for a dryer sensor problem & overheating, now both the washer & dryer are making some ridiculous hum-drum noises! Even with the extended warranty that I purchased, I can see the loop holes built into it; theyve got me over a barrel with the nonsense mumble-jumble tactics of having to qualify for adequate service repairs for replacement of parts (3x on each machine) they cant find, before even attempting to negotiate a buyout that will never happen. Never again, Whirlpool anything!!!

My French door refrigerator and freezer stopped cooling while under a 5 year warranty. The repairman came out 4 times to fix it over a couple months and I lost the ENTIRE CONTENTS of my refrigerator and freezer 3 separate times! I am a single mom working at a non-profit agency and I had to take 4 DAYS off of work to accommodate the repairman. Finally the repairman notified Whirlpool it could not be fixed and I was told by Whirlpool that it would be replaced under the warranty and I should wait for a call back, which never came. I called back after a few days to speak with the Exchange department and Mindy told me that I had to pay $1600 to get the exchange! When I asked to have the call escalated she flatly refused! What kind of corporation is Whirlpool that would treat customers this way? Never mind that the quality of their products gets worse with every passing year! Made to break so they can force you to buy a new one! Ive been without a refrigerator for 8 days already and cant feed my family properly with no place to store food!

I purchased a Whirlpool Cabrio washer and dryer. They work well but the washer underneath lid has rusted already. I did purchase the washer in Dec. 2011 and in June 2012 the inside lid to my surprise had rust on it. I called the Whirlpool company and was told that is considered cosmetic and not covered under warranty..

Whirlpool - good price for pair. I have had this pair for over 10 years and they work good and are reliable even though they were not the top of the line models. Large capacity is a must - energy efficient is also a must. Discounts are nice to get but if not available I will go with a name brand. I want a washer with an agitator not one of the new ones that dont have one. Reliability is the most important factor so repairs are not needed. I want a full size washer with several cycles and all cycles have a cold rinse to save energy. Having a center agitator is a must - cant stand the newer ones.