I brought a whirlpool dishwasher in 2013. It never did clean dishes, had to wash them by hand before putting them in dishwasher. Had someone come out and check it. He told me I was using wrong type of soap, so I changed. That didn’t do a thing. Now I have mold growing in the dishwasher because the tub is cracked all around the inside. Called whirlpool, of course they couldn’t do anything about it. Have never heard of dishwasher cracking. So today, Lowes came out and took picture of crack that is where I brought it. So am waiting to find out what is going to happen. Will not ever buy whirlpool again and will tell all my friends.

We have been having white plastic pieces shoot out with our ice the past two days. We have only had this fridge for about 15 months. After reading these reviews; I am assuming when I call the service will be terrible as well as any fees for them to fix it. I sure hope it is under warranty; or I will never purchase Whirlpool products again.

We’ve had problems with our fridge where after we had it for about 2 months a crack formed on the inside, the repairman came and put a piece of tape, tape on a new fridge I wasn’t happy. Then we had our stove for about a month and the front right element went it was replaced but to this day it works when it wants to and I brought this to the repairmans attention when he came to replace an element in the oven and he didn’t even offer to take a look at it. We called Whirlpool on the 27th of December to get service on the oven and was told nobody could get here until the 2nd of January. This ruined New Years Eve Plans, New Years Day Plans and our turkey which should have taken a max 5 hours on Christmas Day took 11 hours putting our dinner off until 8:00 pm. We purchased the extended warranty ($700.00) to protect us from high bills for repair and this oven issue ended up costing us about $800.00 for meals out. I asked at the time of my call if there was some kind of rebate to cover our meals and the inconvenience over the holidays and they told me no, that’s pretty bad for such a huge company. Our dishwasher which is also Whirlpool hasn’t worked since day one, we had a repairman out and all he said was, run your hot water before you use it and use Cascade, it’s no longer under warranty and there’s pieces falling off and I have to wash my dishes before I put them through the dishwasher so what’s the use of having one. We purchased all Whirlpool because of the reputation but well never buy Whirlpool again or recommend them.

We too have nothing but problems with our supposedly top of the line convection/microwave oven. Purchased in 2010 in February for new kitchen. From start, original microwave installed did not work, would not cook or heat. Dealer replaced. One year later, same problem, but now out of warranty. Had to pay labor, costs, and parts to get fixed. Fast forward 13 months, again magnetron needs replaced, microwave will not work. What a hunk of junk for our money. I will never buy any Whirlpool appliances again, and I will tell everyone I know the same. When you call customer service, they are nice but only say “too bad, out of warranty”. What a joke for a major appliance company to tell customers. It is obvious that this microwave is faulty from the get go, and they just keep on making them the same way and not trying to fix the problem.

I bought a complete kitchen set of the Whirlpool Gold Series Appliance from Brand-Smart in 2/2013. The first problem I had was the compressor on the refrigerator. It started making a noise & stopped cooling in 04/2014. I called Whirlpool and they said there was only a year warranty on parts and service. I was not notified that I could get an ext. warranty. Therefore I will have to pay for the repair. I called a service tech out and he said I needed a new compressor, total cost 255.00. Then in 11/2014 it started making the same noise & stopped cooling another $255.00. Now its doing the same thing. It needs another compressor, will cost me $255.00 more! A total of $765.00!! And I have only had the refrigerator 2 years 2/2015.

I have had two Gold Series dishwashers before but the model number I used had been discontinued so I purchased the W10491035A about a year ago in 2013. It has to be the worst dishwashers I have ever had and we have used them for forty years. Its loud. It won’t dry the dishes, and unless you wash I dont mean rinse, most of dishes are not clean, and that is with the recommended detergent. Whatever you do I would suggest not buying this dishwasher. I dont even know why they would offer a machine such as this.

Everyone has been impressed with how quiet my Whirlpool Gold Series dishwasher was and how clean the dishes came out, but that didnt last but 3 short years. In the life of a dishwasher, 3 years should be less than a third of the life expediency. I purchased a 3 year protection plan from Sears only to find out that it included the year you get the new appliance, so it just added 2 years. Just my luck. I have bragged and bragged and bragged on this dishwasher because it was quiet and cleaned so well, but now I know that was premature because it should have last much longer. I sure didnt get my moneys worth.

I just bought a Whirlpool Cabrio Washer WTW8800YC1 yesterday (1/19/14) delivered today. First load never finished, kept getting error of F51, which I looked up and its a sensor. I looked up the review on this washer and it seems to be the census that this washer is POS. Im having the store pick it up and refunding my money. My old washer is 20 years old and never had an issue with it. We just wanted a more efficient washer. Thank Goodness I didnt have the store haul it away.

I bought my Whirlpool refrigerator model #ed5fvgxws07 in Oct. 2011. One year seven months later, I am experiencing my 1st breakdown. The refrigerator side is failing to cool. I have replaced the temp control thermostat and I am waiting to see if this fixes the problem. I have researched and checked the other possible problems and it is unlikely that it is a defrost fail as there is no frost build-up in the freezer section. And, I checked the heater element and there is continuity through the element. If this does not fix the problem, I believe that there is one other possible solution. I dont have $300.00 to give to an appliance repairman. Maybe I should give it a rap on the side as one other customer said a repair person did to make it work for a few more weeks.

We purchased a Whirlpool Gold French Door refrigerator with a bottom freezer in Dec 2009. We discovered a leak dripping onto the finished basement ceiling. We discovered after several attempts that the plastic evaporation tray was broken (since day one). Previous defrosting had obviously evaporated into the hardwood until now. This item, although obviously broken when installed, was not fixed as the warranty had run out.Boo to Corbiel and to Whirlpool. They are financially not worth a lawsuit.

I purchased my new Whirlpool Cabrio Top Load washer to replace a Maytag that had finally given out in the summer of 2012. I wish I did more due diligence, but with a toddler and a newborn, I needed a washer asap. I severely regret my $800 purchase from Sears. It is now February 2013 and the machine basically only runs on two cycles - Casual and Normal. All the others stop in mid-cycle. Sometimes, the items are still dry or partially wet so I need to switch to another cycle to complete the wash. This is not good for Delicates or when I wash Whites, Heavy Duty or Bulky items which is one of the reasons I purchased the model. The cycle stops when the items are soaked with massive amounts of water. So I then have to turn it to the Drain cycle and start over. After a day of washing one load, I couldve done it the old-fashioned way in my utility basin sink and hung it out to dry ... I dont have the time for this. I am going to make a formal complaint to Whirlpool and to Sears. I cannot keep spending nearly $1,000 for items that break within a year. These companies should be ashamed of their lack of quality. I shouldve gone with the Electrolux and just dealt with the price tag - I wouldve been much happier.

Our range emits smoke and a toxic odor spontaneously when not in use. We feel it could be a potential fire hazard. We have had repair people and fire department out. We have contacted the manufacturer numerous times and they do not return our calls.

I updated appliances in new house, but didnt realize the builder would choose the smaller side by side frigidaire. Could use a larger freezer space, also would like a ice maker that cut off when bucket is full. Overall I love Whirlpool appliances.

My gas hot water heater failed. The pilot went out and could not be relit. The Whirlpool water heater has a 12 year warranty and we are in year 5. Sears said they could not send anyone to repair it because there was no service in our area. We live 30 minutes from Dallas/Ft. Worth, Texas. They offered to replace it even though I had a plumber on standby, ready to replace it. They said they could not let me do that if they had one in stock. After waiting a week for the delivery, they called at 4:45 pm to claim that the delivery truck would not start. They would not put it on another truck or help in any way. Then they said it would be another week before they could deliver it. All this time we are going without hot water, trying to cook, clean, take baths, do laundry etc. They had no sympathy and refused to provide compensation so I could proceed with installing a new water heater. I could have done this if I knew a check was in the mail but they refused to allow me to do this. This happened to me at another big box store years ago and they sent a check immediately. The customer support in the hot water heater dept at Sears was terrible. If they cant send someone to repair and they cant provide a replacement within a few days, it is only reasonable to offer payment so that the customer and move forward with repairs. I will never buy another appliance from Sears after this nightmare. On December 4th Im supposed to get the delayed hot water heater but if the truck doesnt start, who knows how long I will have to wait. I am reasonable and flexible but lack of hot water is something a customer should not have to wait two weeks to get resolved.

Whirlpool gold model GI6FDRXXQ06 - This fridge is 3 years old and we are about to put the fifth ice maker in it. Vegetables freeze in the vegetable drawer (yes, its set correctly). Our repairman even says the design is faulty but since the warranty is out, we have to keep replacing the units!

Cabrio washing machine WTW8600YW0 - Had this washer for 3 years. Its been repaired a few times, but this last time theyve replaced the bearings 3 times and it only lasts less than 1 week. This $1000 washer is now going on the trash. I tried to get help from WP, to no avail. There is a reason these are only warranted 1 year. One thing I liked about it: the fast spin speed gets clothes drier. Every other aspect is crap. Cleans very poorly. You cant make it use enough water. The tub looks huge because it doesnt have a conventional agitator. But if you put much in there you will end up rewashing in small loads because then it REALLY cleans poorly. I bought this because my trusted appliance store owner buddy said he owned one. When I asked him lately he doesnt talk much except admits that yes they have had a LOT of trouble with these machines. The life is very short on them. The wonderful fast spin speed destroys the light bearings quickly. And it gets worse the more its worked on. Its a disposable $1000 piece of trash. Im an engineer, and whoever designed this should have his degree revoked. The type of agitator it has and the extreme low water is very hard on your clothes. One zipper left loose will shred your clothes. I wanted to love the thing, but I have to hate it because it is unrepairable. If you could control the water and if it lasted at least 5 years without having to rebuild it several times at greater cost than it was purchased for, I might be less than rabidly angry at WP. They know they are junk but dont care. You have few choices as they now own most brands, and they know this. I have a Speed Queen on order. Just a plain old simple washer.

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

I have a Whirlpool Cabrio washer (Model: wtw6400sw2 / Serial Number: cu0271913) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool and I will contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

Uses little soap. Not sure on clean. Don’t think front loader clean as well as top loaders. Would recommend top loaders with no agitation. Also would recommend white as a standard color. I am unhappy with the way a front loader works. I am happier with a top loader, cleans better.

This is a Whirlpool dishwasher that has been functioning for 25 years! Much better than any of my 4 newer appliances. It has never had a problem. It is easy to load and unload. The dishes are always clean. Dread getting a new one.

I purchased a gas range with JDR8895 last 09/06/2007 at Home Depot in Metro Denver for approximately $1700.00. I will make my final payment on my Home Depot account next month. I was preparing dinner last September 10, 2011. I had the pans on the cooktop, one on the right rear and one on the left front burners. This was the set up because the right front burner has stopped working some time ago. Both burners were on a low setting as I was simmering pasta sauce and just warming water as I was later going to boil it for the noodles. I was in my living room when I started to smell something odd. When I approached my kitchen, there was a fire coming from the rear of the cooktop and beneath the three burner knobs. It smelled like an electrical fire. I immediately turned off the burners with my hand wrapped in a towel and started putting out the fire by hitting it with the towel and blowing. The towel caught on fire. I grabbed my fire extinguisher and was ready to spray when finally, it looked like it burned out. The smell in my home is terrible, when I tried to test the lower burner it looked like it was catching on fire underneath the knob as well, so i immediately turned it off and batted it with a towel. Im not sure what happened here. I will make my final payment on this range next month and had the previous range in here since 1977 and that still worked fine. I spent a small fortune on this Jenn-Air, only to have it catch on fire that could have potentially burned my house down.On various web sites including consumer affairs, JDR8895 has many reports of fires. If this is a known problem, why has it not been addressed as a recall? My 9-year old was making soup the day before while I was in the living room. This could of easily happened to her! It is a very dangerous situation to put your consumers in!Whirlpool Corporation contacted the appliance repair company, Columbine Appliances, to inform them that they would only be covering the cost of their visit and not the cost of the parts to be replaced in the range (the ones that caught on fire). Through Columbine Appliance, Whirlpool wanted to inform me that this is not a safety hazard and that it was my fault as I got water in the control knobs. This is not true. If I did, I was not aware and was unable to find any literature about that being a safety hazard or that it could cause a fire. I have found and have forwarded to the CPSC many instances of this exact problem, often when the range was not even in use and are happening to other consumers. I am working on combining the data, contacting the other consumers and have since refused service on the range by Columbine Appliances. Whirlpool only tried to contact me after I left them a message regarding the status of the range and that I had no interest in paying for what I viewed as a defect in their range and a safety hazard. I found a news story of this range going up in flames. Its unbelievable that this company continues to stand behind this product and blame these fires on the consumers actions. I am disabled and have an oxygen machine in my home. I have no desire to have this unit catch on fire again and potentially die, especially since water does, on occasion, end up on cooktops. Thank you for your time and attention to this matter.

I purchased the Whirlpool Cabrio washer in 2011. It has been nothing but trouble since. I have had repair people out here several times, because the machine twists and tangles the clothes, doesnt get the clothes clean. Sometimes the clothes come out dry without even getting them wet. There are lots of soap scum too. I would NEVER buy another one of these. SO DISAPPOINTED.

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

As part of a new home purchase from Pulte, the combo oven/microwave can with the house. After one year of usage, the oven liner started the pile and crack. We have a two year Whirlpool warranty through Pulte our builder. When we called the dedicated line for Whirlpool-Pulte to report the issue, we were told that Whirlpool must send a technician to take pictures and see what is going on. The technician shows up and declares that the oven is damaged and repairable. But Whirlpool reject to replace the unit claiming that this is a cosmetic issue and it must have been reported to them within 30 days from buying the home, as this is their policy for cosmetic issues.We did some research on our own and we found out that Blue color liner ovens have a well known issue, but Whirlpool keeps putting these into their products. Our builder is not able to get them to replace the unit as well. I will not ever buy any of Whirlpool products. Be aware if you want to purchase any Whirlpool appliances, warranty to them means nothing, even when they know that they are shipping products that have faulty into consumers.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

I am very happy with my Whirlpool appliance- oven. Ive had it for almost 5 years, with hardly any issues. -Its very user-friendly when I need to program any cooking instructions. Both the elements & the actual oven cook everything to a perfect.

My Whirlpool Dishwasher Model# DU980QPDP, just quit a few days ago after 21 1/2 years. We paid $554.04 for it back in 1995. It was the top of the line. Quiet, with 4 fold down shelves on the top rack. Silverware basket on the door. Also a separate knife basket on the door. It came with extra interchangeable door panels. When the white ones got dented we changed to the black ones. The racks are still in good condition. Never had one repair on this dishwasher, though I used it every day, sometimes twice a day. It had a 4 year warranty on the control panel and a 20 year warranty on the tub and door. We would have it repaired, but cant get the part.

I have owned Craftmaster 30-gallon hot water heater and the only things reliable about it is trouble and aggravation. I purchased this in 2004. I have had to replace the controls, valves, wires, etc. three times in 10 years. And Im now looking at doing it a fourth time. The design of these parts are utter crap! Cheap plastic! After replacing these parts, this hot water heater works great for a few years, then invariably starts acting up. The pilot light goes out when the heater is supposed to kick on instead. Getting the pilot light lit again, is an exercise in futility! The red reset button once released, immediately extinguishes the ignition flame. Supposedly, after holding it down for 1-2 minutes allowing gas to build up, it should light the coils... and if it doesnt, youre supposed to wait 10 minutes to try relighting again. You can repeat this process for 12 hours, and if you finally do get this temperamental piece of junk to light, youre lucky. Customer Service has been useless in assistance. All they want to do is send you e-mail, and get you off the phone. Not to mention, Ive been told by many a rep that the hot water heater extinguishes itself, if water is overheated, and that it must be my fault for setting the temp too hot. Baloney... Ive been told that the underside vent must be cleaned every few months, so that air flow is accurate. Makes no difference one way or the other. And recently, Ive been told by a rep, that my 40-yr-old house likely doesnt vent exhaust out through the roof properly. This product is inferior and unpredictable. Its great when it works, and the pilot light stays lit. God forbid it ever goes out though! It is next to impossible to relight. I have spent more money on service technicians attempting to repair/replace parts, than it would have cost to simply by a new hot water heater. I miss the old days, when it was easy to light a hot water heater: Strike a match, turn the gas on, and instant hot water. No muss, no fuss. Having owned many properties w/ hot water heaters over the years, I have never encountered such repeat problems, as with this product. Its simply not reliable, and not worth the $$$. Never again, will I buy a Craftmaster Product. And I had no clue that there was a Class Action Suit filed, and a settlement involved in these faulty units. Whirlpool/Craftmaster should have notified everyone, who purchased one of their units. Now Im stuck w/ a constantly broken unit, and zero recourse. I will never buy anything Whirlpool/Craftmaster again, as a result.

I have owned a French-door Whirlpool/Kenmore refrigerator for less than 3 years & all the lights start flashing fast when you open the doors. Anyone that knows anything about seizures know this can set one off. Turns out its a common problem with the LED lights & you have to replace circuit board at over $100.00 for the part, plus you may have to have it installed. Best to stick with a $0.99 bulb you replace every 5 years.

Brought a five burner Whirlpool range on June 9, 2018. On Christmas Eve the door fell off and I had a house of 20 guest. Couldn’t cook at all, and cook Christmas either. Call them immediately on December 26, 2018. They set up a schedule for the following week on Monday. The man showed up. Could not believe how this could happen is that he had ordered me a whole new. Dealer said it will be back on Thursday or Friday that week. The serviceman still hasn’t called and it’s Friday. Called the serviceman no answer so here I go another week or two with no oven. The oven door fell when I opened it to take food out and fell in my legs. Have a nice black and blue. Maybe I should think of suing them instead of getting it fixed.

I bought a glass top stove model number W10221843A. My son dropped a plastic cup on the top of the stove. It put a hole and shattered it. Now remind you, it was plastic. I barely use this side of the stove, so not like it was weak. I paid a lot of money for this product just for a plastic cup to destroy it. Is there any recall on this stove? Any help will be appreciated. Thank you.

I have a Whirlpool washing machine that have problem in dryer and drainage. I have registered my problem on 17 December and my SR number is DL 1211015017, but to date, the problem will not shout out. Its poorest response from your side. My machine is in warranty period.

Washer does not clean clothes period. Darks come out covered with white soap residue and smell dirty regardless of how little soap is used or with using extra rinse, which takes 84 minutes by the way. Whites only seem slightly cleaner since hot water is used and you cant see the soap residue. If you wash more than 5 or 5 items at a time some do not even get completely wet. Just waiting for it to break down next according to the other reviews. I spent a lot of money to get a nice washer and dryer and ended up with junk. Id rather have an old 1970 washer, probably designed better and most likely would clean better.

I had this washer (WTW7990XGO) 5 years and finally had to replace it. It started with the touchscreen. No matter how often it was calibrated it was very frustrating to get it to respond. It would start dinging and going thru all the cycles at random times. Then there was the error code for the door lock. The door lock wasnt the problem, the surround was slightly warped and the door wasnt catching. Warped Im sure from having to literally climb into the machine to retrieve the clothes! Then a few months later it was another error code - the machine wasnt draining fast enough. It didnt drain at all. We had to use a water hose to drain it. After the second time with that, I went and bought a new washer - different brand, dials - no touch screen, and it has an agitator. Unfortunately, I ran into other customers in the appliance department who were having the same issues from 2 other brands of electronic washers. We all went back to as old school as was available.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

Dont buy this washing machine. All of my clothes are dingy and gray. I paid $1,751.96 for this set. What a big waste of money. Sometimes the clothes come out with dry spots and then some come out with lint like they have gone through the dryer and yet they are coming out of the wash. Often they are in a very tight large ball in the center of the machine. I distribute evenly around the machine and I dont overload. The brilliant engineer that decided the machine did not need a soak cycle is a person that has never washed clothes. Wish I would have taken pictures of some of the soil still left on my clothes.

After one of the door shelves in our new refrigerator cracked, I ordered a new shelf from our local agent Neuman Appliance repair in Ashmore, in July of this year (2014). I was told that it would take a while as Whirlpool were notorious for poor service; however, it is now the middle of September, and we are still waiting!When we ordered a new part for our dishwasher from Fisher and Paykel, we received the part in just 3 days. I mention this to give an idea of what good service should be.

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

I have a Whirlpool built-in double oven. It is 7 years old. The top oven has overheated 3 times with food in it and it locks the door. The oven beeps and says, Too hot, and locks the door. Luckily I was in the kitchen when it overheated, so I could turn the oven off. After turning the oven off, the oven has to cool off before the door will unlock and the food can be taken out. By then, the food is really burnt.I called Whirlpool to see if there is a recall and they said, No recall, and the oven was out of warranty. So I called the repair shop. They said it was the control board and they were not sure they could get a new control board. I may have to find someone that can rebuild this control board. They said not to use the oven. It could cause a fire. I would think that they should recall these ovens. They should have a safety switch that shuts the oven off if it overheats like mine has done.

I have had this range for approximately 4-5 years with no problems. The design and efficiency are great!! I would recommend this brand to anyone and would purchase it again myself. It has an extra burner just for warming which I love.

I am very unhappy with the Whirlpool Cabrio washing machine that I purchased. Dark clothing comes out with lint deposits that will not come off. I have to rewash them at least one more time and then it does not always come out. I dont know if it is because the water level is too low or that it has no lint filter but I will never purchase another Whirlpool product again.

Doesnt wash clothes properly - often some items of clothing just dont get wet. After 3 years the whole main bearing in it failed, causing unbelievable noise and constant overload faults. All Whirlpool top load washers have this critical design fault where water leaks into the main bearing (the bearing is an unsealed type with a cheap grommet seal) and then after a year or 2 the bearing starts to cease and the machine overloads itself trying to operate. Replacing the bearing means pulling the whole machine apart - and with a cheap press-fit bearing like this, special tools are needed and it will never operate smoothly again anyhow. In any case in 2 years, the faulty bearing seal design will let water destroy the bearing again. Effectively it is not repairable. Sounds like class action to me. So, it became an $1000 paperweight and I bought a new Samsung unit. I assume the Koreans know how to design bearings and seals...

FRUSTRATION!!! It is unbelievable that even appliances have become DISPOSABLE! Where are the days of when our parents bought well made appliances that LASTED 20 years with NO problems??? There was satisfaction knowing that a purchase of an appliance was $$ well spent! These days it costs MORE to replace parts than IF you purchased a brand new machine! We purchased BRAND NEW Whirlpool Duet Sport Washer AND dryer in 2007. The washer has been repaired a total of 5 times and the dryer 3 times!!! IN A SPAN OF 10 YEARS! Are you serious?! With the $$ spent on warranties/ labor/ parts: WE could have purchased new appliances. What is WRONG with this picture? IT IS ALL about making money on REPLACING PARTS/WARRANTIES/LABOR!!! Forget the consumer that is spending THEIR hard earned money to buy the appliances initially. Short of going to a laundromat, the consumer needs to purchase a washer & dryer. So I guess it is a vicious cycle of REPAIRS/REPAIRS AND MORE REPAIRS!!!

I have owned an Accubake gas range since April 2012. The range is 3 months out of warranty, and the oven will not light... just a clicking sound and gas pouring into the oven. I have also had problems with the burners being turned on by brushing against against the knobs. I have a note by the stove to remind myself to check that the knobs are in the OFF position. My 1 year old grandson turned the burner on just by touching the knob... NO SAFETY FEATURES!!! I havent checked to see what a repair is going to cost me, but if it is several hundred dollars, I will just replace this piece of junk. It is very sad that a costly brand new appliance only comes with a one year warranty. I will never ever buy another Whirlpool appliance!!

I purchased my new washing machine in September 2011. When I removed the clothes from the washer after the first wash, I noticed that there was soap on several of the items. I ran them through another rinse and spin cycle, and there was still soap on several items. In an effort to avoid this problem, I no longer use the soap dispenser tray, and use the bulky cycle to get more water in the tub. Like most of the others, the clothes are tangled and stretched from one side of the tub to the other. Also, it takes 1 hour and 36 minutes to run a complete cycle. The manager of Sears tells me, that because of government regulations, that in a few years, you will not be able to buy any other type of washer. I purchased this machine, because it was highly recommended by Consumers Report magazine. I filed a complaint with them eight days ago, but have not had a response.

We purchased a Whirlpool Cabrio washer in 2009. It makes awful sounds during the draining and spinning cycles, has started leaking in the past month and now, several error codes and will not finish a load of laundry. We have a family of eight and thought that we had bought a very dependable product for what we need. Boy, we were wrong!

KitchenAid double oven glass exploded during the self-clean cycle. The oven was purchased on 9-20-11 and the glass exploded on 11-30-11 during the first-use of the self-cleaning cycle. The cavity was damaged with dents and shards of glass from the explosion. Unfortunately, the warranty for KitchenAid is replacement of parts and repair only. Nicole, supervisor at Whirlpool, offered to extend the warranty 6 months. Then I was somehow disconnected from the call.

I purchased a Top load Whirlpool washing machine, replacing my old Whirlpool. I am so unhappy with this new one. I noticed that the water level are low...I had the tech here twice and they said that if here isnt any lights on the dash that the machine is working. I called the head tech, same answer. When I put the clothes in the washer I make sure that the clothes are evenly placed in the tub. The clothes comes out tangled and some not clean. Tonight I noticed that a pair of pant at the bottom of the load had white smudges/ I am so unhappy with this piece of junk/ I cant afford to buy another washer, so I am stuck with this.. I have tried all the different controls, still bad. I know the new machine are different than the old ones. I still believe that the water levels controls are not working. I have used my sister new washers and the clothes are not tangled and they are all clean.

Hi team, I have to lodge this complaint after because of getting continuous problems I have suffered with my Whirlpool fully automatic washing machine top load 11 kg bloom wash 360 degree. I purchased the abovesaid brand new washing machine on 1st Jan 2017. Since the purchase I am struggling with this machine. I raised the fault in the beginning itself and the service was done on 5th of Feb. Jobs sheets enclosed here with.Similar issues kept on arising and whenever I raised those issues with the whirlpool team, they mentioned that company policy is to repair the faulty part if it’s in warranty and they will not replace. They suggested me to go for the AMC and to be on the safer side, I also took AMC under warranty period only. (AMC card - My cheque dates and service details all are mentioned onto it.) Recently I faced another issue on 26th Feb for which ticket was raised. Engineer visited on 27th Feb and advised us to replace the motor part. On 3rd March they replaced motor mechanism and ball-bearings. Then engineer advised us to check the working by giving a trial wash.I started the machine to wash clothes and after 20 mins machine started making abnormal noise. (I have made video of it, audio of the video captured the noise). I again called up the service engineer immediately and informed him about the voice coming out of machine and he gave a lame answer by saying “It is normal sound”. Then I again called Whirlpool and requested senior engineer visit to resolve the issue. Senior engineer visited and told us that one of motor screw wasn’t tighten properly. It opened while running the machine which completely damaged the motor.After that I am continuously calling to service centre to get the updates on my machine motor replacement. Finally they mentioned that they dont have motor part available with them due to company ceased this model productivity. When I raised this issue with the Whirlpool team they mentioned that they can only pay 40% of the machine value, because I had AMC. However, I did mention that this damage is caused by the negligence of their service engineer, but they didn’t discuss anything about it.When I continuously chased them they dropped me an email to refund only the 40% of the machine value. I feel cheated and harassed!! When I bought the machine they gave us 10 years warranty now they mention that motor is not available as it’s a 5 years old model. My grievance is that since I had already taken the AMC and the damage was also caused by their engineer, why I have to bear the loss. I have already struggled a lot with this machine since last 5 years from the day I bought this machine and now I am losing my hard earned money. Kindly do the needful. Documents attached as follows: 1. Serial number of this machine 2. Bill/ Invoice copy from dealer 3. Job sheets4. AMC card (with 3 years extended warranty) Thanks,Pratibha

I have had my refrigerator for eight years. Only had one prior repair which cost me $85. I have had a wonderful experience with this particular product. I am pleased with the liability and hope to replace with an equal or better appliance.

Within a few months after I purchased my gas hotwater heater, I started having problems with it not wanting to stay lit. It was purchased in 2004. I see that this is an ongoing thing with Whirlpool. Every time I would call them, they would give me stupid answers on what it could be. One lady got hateful with me. I have replaced every part several times and Im having problems. About every two to three months, Im replacing thermal couple. As of right now, Ive been without hot water for eight days. I called and he told me about a trip button that is in the little white thing that has wires going to the thermal couple. I push in on it and then tried to start my heater and it worked. They have never offered to replace it or even give me a discount on a new one. No one should be having so much trouble out of your hotwater tank. This is not normal. These are defective and should be recalled. This company is ripping the consumers off and we need to stick together on this and do something about it. Im afraid to buy another heater because I can see that the new ones are still junk. What do you do?

AquaLift Self-cleaning does not do the job as advertised. It does very little to clean the oven. Sitting-on-the-floor-in-front-of-the-oven scrubbing is what is needed to clean the oven.

Whirlpool Cabrio Washer model # WTW6800WW1. Bought it July 2009 and it broke Jan 2017... 7.5 years old. Cost to repair $715.00. The technician recommended that I just go ahead and buy a new one... not worth the while to fix. I paid $900 for this machine in 2009. This is an expensive machine, not a cheap ass one. Shame on Whirlpool for selling products that dont last and for making it unaffordable to fix.

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

After only 6 months of use, the cooktop light bulb burned out. When I tried to replace it, the glass part of the bulb separated from the base. The bulb is screwed in so that the base faces away from the front of the microwave. With the small cavity and the backward installation, it will be impossible to remove. Now I have no light and dread how much a service call will be. The unit was installed by a contractor prior to our purchase of the house and it is now out of warranty.

Once again I am disappointed in a product that I felt was of the utmost quality. However after buying in 2010 and not being installed until 2011, the over the oven microwave has a crack on the outside of the door. Two pieces have fallen off from under the plastic rim on the inside of the door, two pieces of the door one on the top right side and the other on the bottom right side have fallen off. All I have to say is the two Whirlpool products I bought at Lowes has been a huge disappointment especially since the other two bought from the same stores are Frigidaires and work beautifully...

The worst washing machine ever. First off you cannot turn the water on to let it fill and add clothes as its filling. Secondly the Normal setting will not allow you to spin on low, your choice is high or no spin. High tangles your pants, slacks, shirts, etc. No spin leaves them soaking wet. Also its a water safer but never, never, never covers the clothes in water, and sometimes they dont come out smelling so clean. I dont save water if I have to rewash two or three times. Absolutely hate this washing machine. When I get enough money I am going back to the old agitator model and not any Whirlpool either. Oh and the other thing, you cant just throw you clothes in the washer, you must arrange then to the outside of the center itty bitty agitator. Hate it.

We have our stove for over five years and we have had no problems with it over the years. It has a black top and this seems like it is a little harder to clean, but other from that we have had no problems with either stove or oven.

I purchased my Whirlpool Cabrio Washer (WWT5640xw0) at Lowes in East Orlando in 2009. It has worked without issue (other than a slight odor) from then until today, 5-1-12. It has now refused to agitate or spin any clothing, it emits a slight burning smell from the basket, and the basket, when it does decide to spin, spins about as fast as a merry-go-round, banging into the sides of the washer (causing the metal on the sides to bulge out every time it strikes them). It is self-destructing.I called Whirlpool, and they simply refused to address any questions, once I told them that I did not have an extended service plan and that my unit was older than 12 months. I informed them that I refused to pay for an ESP, because I refuse to pay additional monies in order for the product to perform as advertised. They were rude. I said bad words. The call ended.$600 was gone. And I now have to run out and buy another washer, and I can promise you it will not be a Whirlpool. I am a local law enforcement officer. I would love to speak with an attorney about this if a class action suit is pending. I am beyond pissed. My moms chartreuse-colored Maytag still works after almost 30 years of service to our family. It required a new drive belt at somewhere around year 17. The belt cost $45.The Whirlpool CS rep informed me in a surprisingly snarky fashion that it would probably cost over $360 for the total cost of repair and that the only way to know exactly how much is to schedule a service call. I was also told that I would be on the hook for $100 for the service call even if I declined the repair.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

I purchased a house with Whirlpool products installed. The refrigerator wasnt too cold but working for the first 2 months. Then the ice maker stopped working, the freezer stopped working and now nothing works. I have been through 4 service calls, I repaired that took almost 2 hours and the refrigerator is still not working. I have spoken with numerous Whirlpool representatives and they were like robots with respect to their response. There is a chain that they adhere to and once you have spoken to an executive at their corporate office, no one else can help you. Now I am trying to reach that executive and there hasnt been a response. I havent been able to have food in my refrigerator for over 3 weeks and counting. Imagine, eating out for breakfast, lunch and dinner for this length of time. Christmas - no refrigerator, New Year - no refrigerator. A consumer who makes a purchase in good faith should not be put to this kind of agony while trying to remedy the situation. I dont know what happened to their customer service but it is nil. From my own personal experience and in my opinion, Whirlpool is not a company that cares about their customers, just their profits. I am at a loss . What are my options as a consumer?

We bought a Whirlpool freezer-bottom 18.5 cu ft. fridge from Lowes. The compressor broke in less than three months of regular use. I called Whirlpool who sent A&E to check it out. The technician didnt even file a report and lied to me about what was wrong with the fridge. They sent a different company to come look at it and they confirmed that the compressor is broken. I called Whirlpool customer service and was told that the warranty only covers repairs not replacement even though I paid over $1,000 for a defective product. The excuse: Its a man-made product so we cant guarantee it! So what used to be a 3-5 year warranty not too long ago is now what? A one-year warranty is virtually useless. I can see a future not too far off where there is no warranty at all. Where is the protection for the buyer? If I wanted to purchase a second-hand fridge, I would have. I will never buy Whirlpool again.

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

This is the second time since I have bought my Whirlpool top loading washing machine, which was January 1, 2011. During a power outage, I was washing clothes and my machine lid would not unlock after our power came back on. I called the warranty service and they made arrangement for a repair man to come out to repair it, but the appointment was in two days. Meanwhile, I had clothes in the machine I needed and was afraid they would become molded and no good. So my husband opened the lid and I removed the clothes. When the repair man came, he was not going to repair the machine because we opened the lid. He was very rude, but after doing some talking he repaired the lid. Now, once again we had a power outage while I was washing clothes and the lid is locked on the washing machine and will not open. This happened Friday, March 16, 2012; my appointment for the repairman to come is Tuesday, March 20, 2012. Meanwhile, my clothes are sitting in the machine wet because we were told not to try to open the lid and wait for the repair service to come. I am very concerned my clothes will be molded and I will be unable to use them. I would never buy another washing machine like this one. Model number is WTW4800X, Standard/Ordinaire VOXr8ENA(3B). Date of purchase: January1, 2011.

Whirpool Cabrio Washer - Do not buy this washer. Clothes are not clean. They are twisted with residue still trapped in the wadded up mess. Even if you select deep water clean, your clothes will still have the same dirty marks on them as when they went in. Also, there is no spin cycle. If youve got a bunch of wet towels you just want to spin the water out, you can forget it. You will have to do a complete wash. And the 1 star is not even appropriate but there is no choice of a big fat zero. Wasted a lot of money on this when Ive had great luck with Kenmore.

I bought a new home from DR Horton with Whirlpool appliances. All of the kitchen appliances were Whirlpool which came with a 1 year warranty. After closing on the house and getting in, started the dishwasher for the first time, it started leaking water instantly from the bottom of the unit and spilled all over the floor. Tried to contact the builder/inspector who asked us to contact Whirlpool. Called Whirlpool and I was kept on hold for over an hour before someone answered. The rep was so adamant talking all unrelated things and said that she cannot do anything for another 15 days. After escalating to the supervisor, it was the same response. The service at customer care is so bad with no fix in sight. I am not sure what they are going to do with the appliance and not sure whether they come and fix it or keep me waiting. Very unethical, the way they talk to the customers.

My refrigerator & dishwasher were purchased less than a year ago. Ive already had all the doors replaced on the fridge and the new ones are rusting. Discovered same issue with the dishwasher. The company doesnt seem to be overly concerned with remedying the issue. No sense of urgency or concern for the customer.

I purchased the original Whirlpool refrigerator in August of 2013. That was replaced in October of 2013 due to a factory defect that left the ice maker unusable. In April of 2014, we now have a factory defect that has resulted in the entire unit unable to keep the fridge below 70 degrees F. It has been 2 weeks since the fridge died and Whirlpool has informed me it will be another 2 weeks until a replacement fridge will be delivered. I have spoken with countless customer service reps and 2 customer service managers, as well as 1 executive from the executive office in Michigan. Several times Whirlpool has dropped the ball in this process. The original repair appointments were booked and had to be rebooked because the repair company could not accommodate the appointment times Whirlpool booked. It took over a week to get the fridge declared dead. Then another week just to process the request through tech support... After speaking with 2 customer service managers and being told it was being rushed, I spoke with an executive who said the claim had never been submitted and it would take another 24 to 48 hours to process. I spoke with the executive after the 48 hours and he said the fridge will be delivered in 2 weeks! 4 weeks without refrigeration for a second factory defect. I have explained that I have a newborn (6 weeks old when this started) and a 2 year old, and we have had up to 9 people staying in the house (to visit with the baby) over this period and that I need a fridge to keep my breast milk cold. I was told I would receive a $75 gift card and a $125 check to help with food and costs associated with the loss of our fridge... Neither have arrived. We are spending quite a bit on ice just to be able to keep food and milk cold to temp. so we dont have to spend money on eating out (too expensive for us). I am shocked by Whirlpool’s poor customer service. The first time the fridge was replaced I dealt with one person and didnt have to call the customer service line every day. I wish I had her number still.

I absolutely hate my Whirlpool refrigerator! The first day I had it, the cover to the deli drawer fell off and cracked because it wouldnt stay on. I called the company and they sent me a new one but it immediately fell off and broke also. It is just a terrible design. The plastic slots dont fit correctly and it just doesnt stay on.Then, a few months after owning the fridge, I notice rust spots on the bottom drawer. I called the company and a rep told me to buy dishwasher cleaner and a magic eraser and use that to scrub the rust off. She insisted that it must be near humidity. I explained that my GE stove and dishwasher, along with other stainless steel in my kitchen have never rusted. The Whirlpool company provided no help whatsoever and does not back up their warranty. I would never purchase another Whirlpool appliance after this experience. Now I am stuck with a fridge that has rust stains and a broken door.

I love my dishwasher, have had no problems and it does a great job. Stainless steel interior is a plus. Give it a try, you will be satisfied with the performance.

Purchased this dishwasher in January 2012, and it stopped working in May 2015. We replaced thermal fuse a year ago and just had to replace the control panel. It worked for 1 day and through 2 wash cycles, but during the 3rd wash cycle, it failed to drain and no power again, which is the same problem we had before. We opted to also replace the control board, just to be safe. Lol. What a piece of junk! Whirlpool is a pathetic excuse for a company, and, judging from others experiences with the customer service department, we will not bother contacting these ** since they clearly have no interest in providing any service at all to their customers. I have had many other lower end dishwasher models, and all of them worked well past the 5 - 10 year mark and never stopped working or required any service. I WILL NEVER PURCHASE ANOTHER APPLIANCE FROM WHIRLPOOL AND HAVE SPREAD THE WORD TO EVERYONE I KNOW. Good luck, Whirlpool. I do not expect they will be around in 10 years. Lol. Do not give your hard earned money to these idiots for the junk that they peddle, and please let your local appliance dealer know why you wish to purchase any other brand BUT Whirlpool. Consumers are not stupid, Whirlpool! You are ignorant for banking on that and should be shut down for your unfair business practices, not to mention misrepresentation of your despicable products.

I bought a new washer thinking I was upgrading. Wrong!! Well the new so called technology they put into these machines is overrated. They took a good thing and instead of advancing they have took two step backwards in time. I wish I had kept the old washer I had. I think I would rather use an old time wringer washer my great grandmother used. They are probably faster by hand. This new Whirlpool grabs every string on my hoodies and twist my clothes so tight in knots. I cant even remove my clothes until I fight and get mad enough to write a review. Whats up with these new washers?? Get rid of the slots on the Agitator!!

We bought this pair, the washer and dryer, not even two months ago. I have not liked it since day 1. My clothes do NOT clean well at all. I had to wash the same load THREE times and still there is dirt on them! Just regular dirt. No oil, grease stains or anything... dirt. I even went and purchased POD detergent to make sure I was using the correct amount of detergent... Came home and washed the load again... DIRTY. Customer service says theyll send out a technician, but if they find nothing wrong, itll cost me... I wish I had read the reviews before I purchase this junk! DO NOT BUY!!!!!

I feel Whirlpool has a terrific portable dishwasher. I really like the way it is set up and it is a very nice looking unit. They could improve on their customer service towards their customers. My dishwasher got a crack in it at the top of the door where you open it and they would not send anyone out to fix it for me. I paid a pretty penny for this dishwasher and felt they should have fixed it for me. This happened in the 1 year warranty period. Otherwise I am very happy with it. I had previously had another one that lasted me 14 years.

Have read several reviews on Whirlpool refrigerator. Short and sick. I had my refrigerator less than a month. Broke down, been getting NO satisfaction from Whirlpool whatsoever. I WILL NEVER BUY A WHIRLPOOL APPLIANCES AGAIN. Service is terrible. Months have gone by, and its still sitting in my kitchen broken. They are taking their sweet time fixing it. Garbage. DONT BUY WHIRLPOOL, save yourself the hassles.

I purchased a new Whirlpool Cabrio washer/dryer set 2 1/2 years ago (Jan. 2009). I have 4 kids and do lots of laundry. This is THE WORST appliance, namely washer, I have ever owned! I so wish I had researched this product more. I ditto everything that has been said about this washer. It tore up so many items of clothing, I lost count and does a horrible job of getting stains out. I contacted Whirlpool on several occasions only to be told that they would send a technician out to see if there was something wrong. The technician would report that the washer was working properly and Whirlpool would then tell me, sorry, we cant do anything about it. I asked them if a washer was supposed to clean your clothes and unravel them? Yes, it is supposed to clean them. Well, its not doing that. No, it is not supposed to unravel and destroy them but well, it IS doing that! Therefore, the washer is not working properly. Just because a technician can not physically find something wrong with it, doesnt mean it is a poor functioning washer. This company should better learn very soon that you must stand behind the QUALITY of your products or you will soon be out of business. I will never purchase Whirlpool products ever again nor would I recommend it to anyone!

We have a Whirlpool Cabrio mod. WTW5600 XW2, ser. C12830447 he... H2O.. low wash system. Less than two years old. It does not get clothes or towels clean. I put 2 jackets in on bulky items and part of one of the jackets was still dry. They were two small childrens jackets. My husband and I wash as long as possible and on hot wash (which is not hot!). Should not take 70+ minutes to try & get normal clothes clean!Now the softener is draining into the wash with the detergent. Another service call. Learned you can only fill the softened bin half full or less. WHAT??? Our extended warranty is up soon and not sure what to do. We would like to get rid of this pile of junk but cant afford another washer bill. Also wouldnt want anyone else to get stuck with it. Its a shame a company cant put out #1 good product and #2 stand behind it. Bring all of the company production back to the USA or put out a better product and stop worshiping the almighty dollar. Im done with Whirlpool (which was the product to buy), but stuck with this washer for now until we are sure that the brand we buy performs as it should. What happened to the PRIDE in & RESPONSIBILITY of making a good product and standing by what youve made. As my hubby has said, if you have to buy an extended warranty, whats wrong with your product! Again worshiping the almighty dollar or is it you just dont care about the people who buy your product or its quality. Maybe both.P.S. Have contact you before without a response.

My old GE was better. I have to clean my Whirlpools filter once a month due to hard water - was wondering why my plastic cups had a white film - that was why. I have to put the knives and forks with the points facing up. My old dishwasher I could put the silverware in any way I wanted in the silverware compartment. My old one was quiet/my whirlpool I can hear it from the bedroom????

Error f1e2 error. Washer less than 2 years old.

I had a Whirlpool oven for 14 years. It worked great and the control board burned up during the cleaning cycle. I purchased a new whirlpool oven that did not have an exposed bottom heating element. It takes way too long to preheat and if during baking, you need to change the temperature, it starts preheating again and the displayed temperature is lower than the original temperature that was set at the beginning; and it takes too long for the oven to reach the new temperature. This appears to be the result of the bottom heating element being hidden. Heating and maintaining a consistent temperature is far more important than being able to clean the bottom of the oven especially when this is a self-cleaning oven.Updated on October 20, 2015: This is an update on my last review. I was cooking a cake at 350 degrees and when the designated time was up, I opened the door to check for doneness. The cake needed to cook a little longer, so I closed the door and the temperature immediately went to 300 degrees and started preheating again which of course caused the oven to get too hot for the cake I was baking. Who is designing these ovens??? Certainly not a person that cooks on a day-to-day basis. I will never buy a Whirlpool oven again.

First of all, I did not want to give a rating of one. Your system forced me to. They do not even rate one star.In summary of the below, I did not fail to communicate from the moment we received our appliance and Whirlpool in short intentionally wasted time to let the warranty run out to avoid replacing a lemon of a dryer. Please read details below.We bought our new dryer (model WED9400SZ) on 10/24/10 with a one year service & parts warranty from Appliance Smart in Apple Valley, MN. In March 2010, we called in to Whirlpool customer service to relay our issues & to arrange for service & repair after a few months of noticing holes in our clothing (at first thinking it was the new Whirlpool washer making the holes).Although we purchased the unit in late October, we didnt use it for the first time until late November (1 month later) as we just bought our home & took four weeks to paint the entire home before moving in. Then on December 29, 2010, we left for a three week vacation to Mexico & again hadnt used the dryer during that time. Returning home, we started to use the new washer & dryer (in late January 2011) but had thought it was perhaps the washer making the holes & it took us until to March for Whirlpools preferred service repair providers to determine that the holes were coming from the dryer. I do not have a reference number to refer to for the complaints to Whirlpool as I was not provided one.They only always asked for our delivery address which is: xxxxx ****, Lakeville, MN.The issue of the dryer making noticeable holes in our clothing and in one instance chopped a sock completely in half (both pieces found within the dryer drum not stuck behind the drum or sucked into another area of the dryer) has been consistently ongoing and to date has not been fixed. On several occasions, I expressed my concern to Whirlpool customer service as well as to managers (because the case had been elevated to where they had managers and review boards looking at the problem more closely) as we were getting closer and closer to the warranty expiration and the dryer had not been fixed. Routinely, I was told that regardless of the warranty expiring, if its the same issue that persists and had not been resolved while within the warranty date, they would continue to honor the warranty by continuing to try to fix the problem or replace the unit at no additional cost to me if necessary.Whirlpool had escalated this repair issue (multiple times) to their review board and determined that the dryer was indeed repairable and continued to send out Twin City Appliance to repair it. Finally, just 23 days out of warranty, Whirlpool deemed the dryer should be replaced, but at the cost of a new machine $370 to us (which they somehow prorated to get that figure). We paid $399.98 plus tax for our supposedly new dryer so clearly this is an unexcitable resolution. In speaking to Rhonda this morning, she further prorated the new dryer replacement cost to $260 to include installation and another one year warranty and gave us until December 21, 2011 to take advantage of.This product never worked from day one (a lemon) and has caused roughly $400 in damage to our clothing (all photographed for proof). This has further resulted in me missing work to let in repairmen & and taking great amount of time to lay out out wet clothing around our house to air dry (again, all photographed. ) This has caused extreme stress for me in spending hours and hours on the phone with Whirlpool and repair people (cell phone records of dates & conversation length as proof). I have also developed great anxiety attacks in using our dryer, scared at the outcome of which of our clothing will be ruined. After having two different service repair companies (A&E Factory Service and Twin City Appliance, both in MN) at Whirlpools insistence come to our home on more than 10 occasions within the year warranty to determine the cause & try and repair the faulty machine, this proposed resolution by Whirlpool is absolutely unacceptable. It is important to me as a consumer the this issue is formally filed with a reputable institution (BBB). I feel we have no choice at this point but to contact our lawyer and take this issue up in the courts. Resolution proposed:I am seeking a replacement of our dryer at the equivalent or greater value than the model we purchased and a letter of apology from the CEO or equivalent position in their corporation as I want to know that this poor level of customer service provided by their company was indeed brought to their attention. I am also asking for $400 to replace our damaged clothing. When this goes to court if not resolved via the BBB, I will ask for pain and suffering damages as well.This has been an unbearable chapter for our family this year, one that has weighed heavy on us and caused great stress, anxiety and loss of money and time. I am in shock that a worldwide corporation with the longevity and commercial history and quality service that Whirlpool was known for cannot admit that this lemon we purchased is a (most likely) rare instance and step up to the plate and demonstrate integrity and show value for their customers by doing the right thing. Time after time their customer service reps promised I had nothing to worry about and that if the machine could not be fixed even if it fell out of warranty, they would take care of the replacement of fixing it at no additional cost to me.

Whirlpool Gold (Model No. GX5FHDXVY04), expensive French-Door style refrigerator , with bottom freezer pull-out drawer, purchased in 2010, has drain line that repeatedly blocks, causing frozen sheet of water on bottom of freezer and consequent leaking of water onto wood flooring (ruining said flooring). To add insult to injury, 5-year extended repair warranty I purchased specifically EXCLUDES drain lines, leading me to believe that this is a well-known problem that is costly to repair which is true because the drain line and pan on this particular model is nigh impossible to access without upending the unit (two people required) and accessing the bottom panel of the unit. This appears to me to be a design defect that Whirlpool should correct -- at its expense, not mine. I am currently reviewing possible courses of action, to include, but not limited to, BBB complaint and litigation.

Whirlpool Cabrio washer - Its very expensive and it quit after 3 years. Repairman said computer component went out and it would cost $450-$520 to repair and it wasnt worth it. He also told me I should have read reviews first. Whirlpool said I should have bought extended warranty. No more Whirlpool appliances will be bought for our homes or business.

My not yet 3yr old ($2100.00) Whirlpool refrigerator started having problems. I thought it was related to the ice maker. When the repairman came out, he said it had leaked the Freon, so I thought it should have been a simple fix. Boy was I wrong. It turns out it has a sealed system so no one can access this to fix it. It is now junk and I have to buy a new one. I will never purchase Whirlpool anything ever again and I will also tell anyone who will listen about my experience. My repairman said this happens all the time, and 7 or 8 yrs ago Whirlpool went from being one of the top models to being junk.

After 2-1/2 years we started having trouble with the spin cycle on our Maytag washer. We live in an area with no repairman. Whirlpool want us to pay just to talk to us. Now the timings off. It will not spin out.

Our Whirlpool dryer broke less than 3 months after we bought it. We called Whirlpool and spent more than 2 hours on the phone. They sent someone out and that person told us he couldnt fix the part that was broken. He gave us a phone number to call and we called and spent another hour on the phone after which we were told to call Whirlpool back. We called them on 3 separate days and spent hours on the phone trying to contact real people. After another week (during which time the dryer went out of warranty) we had to call someone to fix it. After that we spend a month calling and emailing Whirlpool to get reimbursed for the almost $400 we spent fixing it. No luck. We were told that it was out of warranty and we didnt use a Whirlpool technician. I was hung up on, given the runaround through phone menus, continually told it wasnt the correct department, and finally that Whirlpool doesnt cover it. Bottom line is...never buy Whirlpool.

My stainless steel french door refrigerators compressor quit working and needed replaced after 3 years and 10 months. I had to buy a replacement kit and it cost 400.00. The repairman cost 175.00. I tried to buy an extended warranty but they do not sell them. You get a 1 year warranty. The repairman told me you will be very lucky if you get 4 years out of the replacement. He said all of the new compressors are really junk. Remember when refrigerators used to last 30 to 40 years. Not anymore. It is a money racket. Do not buy anything Energy Star, it is all junk. I have gone through 5 washing machines in 18 years, and I live here by myself.

HORRIBLE! I purchased a Convection Oven Microwave in Oct. 2010 and 3 months later, the microwave stopped heating! I called customer service and they replaced the magnetron and two other parts. Two months later, the appliance broke again with the same problem. They serviced it again. Today, it was broken again and the service technician stated that its the magnetron again. I called to get it replaced and they said Whirlpool doesnt replace appliances, they just keep servicing it. **! How can they get away with this!

I purchased A Whirlpool washer model WTW4816FWD some six months ago and it is worse than my 13 y/o washer I got rid of. When wringing clothes it seems be out of balance as it bangs like crazy even when clothes are adjusted. I thought it was the feet but no dice and the auto sensing levels allows for the washer to fill completely with only three items in it? The noise it makes while washing can be heard throughout the whole house too. The cycle takes three times as long of any Ive ever used! I hate this thing.

A 12 year old built in double convection oven that has a retail cost of $4500.00 has its control pad discontinued. I cannot repair my investment. I spoke to the executive offices & they arrogantly told me that they only have to make parts for the length of the warranty. Suppose you had a 12 year old Honda that they discontinued a critical part would you feel swindled, I asked. We dont make cars was the response from the executive customer care agent. ARROGANCE How to destroy a company one customer at a time.

Our Duet Whirlpool washing machine is less than 3 years old. It would not always turn on when we would start it, or it would start and then it would give me an F70 error. If we pushed the start button again, it would continue to go through the wash cycle. There was nothing in the manual about that error. I called the service department and they could not tell me what an F70 error was either. The service department wanted to schedule a service call right away and offered me an extended warranty for $345.00, for one year. Since it was less than 3 years, and it didnt seem too serious (since the wash cycle would complete after pushing start again), I figured that it wouldnt be that much of a repair bill, so I declined. Also, I might add, that my previous 25 year old washer had only had one repair bill for a total of $200.00.When the service tech left, he handed me a repair bill for $741.00! I nearly fainted! He put in a new board. I immediately called the service department back and they said, Sorry, the extended warranty was a one-time offer and no assistance was offered when I asked. I could have bought a brand new washing machine for that price. Bottom line is, I would not buy a Whirlpool appliance again, and I would never contact Whirlpool for a problem. I would contact someone local. Had I known that a repair bill could have remotely cost over $300.00 on a new washing machine, I would have waited until it completely died and then bought a new one, and not a Whirlpool!

All I ever wanted was a nice refrigerator with the ability to get crushed ice from the door. We bought our refrigerator from Lowes several years ago and have had problems with the ice dispenser ever since. Lowes sent repairmen many times and even replaced the one we purchased with a newer model. Whirlpool refused to replace. The problem persisted and we had to continue calling repairmen. The last straw was when the repairman asked to borrow my hair dryer to help him melt the ice that continuously builds up in the door chute. I stopped going through Lowes and went directly to whirlpool for repairs. Since then I have been told that I should remove the ice box and clean out weekly, be nicer in order to get better help and that my husband should do the talking so that Whirlpool will be more helpful. I am so disappointed. Its been a couple of years since I last called for repairs even though we had the extended warranty. I have to clean the chute daily in order to get crushed ice from the door. Whirlpool knows that their engineers developed an ice dispenser with problems but will not admit it. Their customer service is the worst ever. I will never buy a whirlpool refrigerator again.

The board manufacturer number W10312659 went out. They replaced the board. The oven was 6 months old, luckily was still under warranty. We didnt purchase a extended one because mostly it had a good name and brand. Well after a year and a half the board went out again. It gives error code H5P which there is no error H5P. So the boards out. It is very costly and thats with you doing your own service. Never will I buy another Whirlpool stove.

The washer was 5 months old and broke. Three service appointments and multiple phone calls, it still wasn’t fixed. Whirlpool sent rusty parts out to my home and that was the second excuse for not fixing the washer. The poor service guy must have been 70 years old. Hello, how do washer parts get rusty when they are not even used and are kept in a box?

Purchased a Whirlpool Cabrio Washer a few years back... Started getting F1 error message and just proceeded thru it like most did initially, but now has become pain in the rear just to do one load of laundry as we get the error 2-3 times when we start each load - then on every load w/ 21 minutes left on the cycle. From the looks of things online this is a chronic problem and should be fixed by manufacturer. I called Whirlpool customer service and first person I talked with said they understand it is an issue but no longer are any recalls or reworks on that machine. I asked to speak w/ supervisor and sat on hold until I got one. Was then informed they do know it was a problem but was not something they could do anything about other than schedule a service company to come take a look. I specifically asked if there was at one time a recall or if they were fixing this issue for a while. She said Yes, they took care of some of their customers but are no longer doing that for this model. So basically because I didnt call in at the right time I need to fix my machine myself. I said it will be the last Whirlpool or Whirlpool associated appliance I ever purchase if this is the kind of customer service I can expect... The supervisor just said she was sorry to hear that and to have a nice day. Hopefully enough people read these reviews as I wish I would have before purchasing my Cabrio and dont buy Whirlpool.

My elderly parents had everything they own destroyed in Hurricane Sandy. After rebuilding their home, the new Whirlpool washing machine was broken. Whirlpool refused to disconnect and remove the machine that was obviously broken before it arrived. This is something that no one should have to go through. It is appalling and bad business. Through the kindness of friends, we had several male friends help with the removal. Truly shocking, that this is how Whirlpool handled this situation.

Whirlpool Duet Sport W & D purchased from Costco in mid 2007 for $1600. Costco gives an additional one year warranty, totaling three years. Both have worked exceptionally, I must say -- clothes come much much cleaner, keep their color, and last much longer vs. top loaders (Im sure the water softener helps). Two separate techs just confirmed the circuit boards went on the washer ($450 with labor) to replace. Washer looks brand new, but now will be going to the curb.