Having spent over RS 40000 on a so-called quality product one does not expect to spend nearly 20000 within the first two years of the purchase. 1. As soon as the warranty got over the PCB (costing 3000) broke down. 2. This replacement had a 3 MONTH warranty. Exactly after 9 months again the PCB breaks down along with leakage of gas. The service team asks us to buy a stabilizer to ensure that no such issues occur as they attribute these breakdowns to voltage fluctuations which are not of any precedence in Delhi. Also the product I am using was sold to me as a stabilizer-free working. 3. I made the suggested investments 4 months later the fan and motor of the freezer stop working. Imagine so much repair work on a new equipment. I have been writing to them yet all that they say in response is we are looking into the matter. NO ONE SHOULD BUY WHIRLPOOL REFRIGERATORS.

I am also disappointed with this manufacturer. I recently purchased an over-the-range microwave oven model KHMS2056S. Within 45 days of use, it quit heating. I initially established a service call through Kitchenaids web site, with the first available weekend appointment approximately 2 weeks away. When the contracted service represented arrived (A&E), he asked me for a cup of water and placed it in the microwave, along with a temperature meter. After running the microwave for 45 seconds, he informed me that microwave was not heating. This was the extent of his troubleshooting, only to confirm what I had already reported in my initial service appointment description. The next step was to order parts and wait another 10-20 days for a new service appointment. When I challenged the technician on this, he stated that they were required to verify the problem and check the model/serial number of the appliance. But these were also provided through the automated service appointment system. Thanks to Lowes who allowed me to return the item, even though the purchase date was outside the 30-day window. It seemed obvious to me this warranty contractor was simply creating multiple service calls to inflate the repair costs. And ultimately the consumer pays this.

Bought a Whirlpool range in Nov. Within a month the large burners fell apart and the reflector bowls discolored from normal use. Call Whirlpool and they sent out replacements. Within a month the first replacement fell apart and the new bowls discolored from heat again. I held off calling until the second burner fell apart and this time when I called I was told I would have to stay home to wait for a service call to have burners replaced which I could do myself and that the bowls arent covered and that it normal for them to discolor with normal use. They said I should wrap them in foil to protect them.They appear to prefer wasting time and money rather making a good product. The burner bowls from my old GE stove are still shiny after many years of use but Whirlpools cant hold the finish for a month. Please note I was an appliance tech and ran an appliance repair business for 18 years. These failures are not normal or acceptable. I will never buy Whirlpool again.

I Purchased a Whirlpool range with self cleaning. I do not recommend anyone to purchase these ranges. The self-cleaning does not work at all. Like numerous reviews that said you can run them several times to do the self cleaning and they do not clean at all. Save your money. Do not purchase a whirlpool appliance!

We bought our new Whirlpool Cabrio Washer & Dryer combo from Lowes on the north side of San Antonio, TX, for delivery when our new home was completed in Blanco, TX. Delivery & setup went smoothly. But it wasnt long before we both noticed something wrong with the washer. What was supposed to be one of the quietest washers on the market was far from it! -- loud grinding & thumping noises when the spin cycle would kick in. Whirlpool service dept was called and a repair tech was dispatched - 4 TIMES! The tech from Appliance Science spends most of his time on his phone talking to tech support, and has pretty much changed out parts at will! The motherboard, the pump, the clutch, the splutch have all been changed, to no use!We still experience problems with the washer NOT spinning, or only spinning for a short time, and the clothes still soaking wet! Its a good thing the dryer works well, because the washer is a dud, and we cant do a damn thing about it! Weve been told by Whirlpool service that since we have a repair warranty, we cannot get a replacement washer because we dont have a replacement warranty. Ive never heard something so ridiculous! Color us highly dissatisfied in TX!

My Whirlpool Gold, French door refrigerator is 3 years old and just died. The most frustrating part was trying first to go through Whirlpool.com to have them schedule a repair service call. It seems that when I added my zip code and address, their program automatically changed the zip code. So an appointment was scheduled for a repair company that is 4 hours away from me. In calling Whirlpool back (another 30 minutes on hold), they again attempted to insert my address and zip code only to find the program changed it again. I got NO assistance. I finally did find someone (through Thumbtack.com) who found that one of the 3 circuit boards that tell the compressor to cool, was bad. Its going to be 10 days before I will have a refrigerator again and after spending 2K on it, makes me angry. I will never buy Whirlpool again.

I bought my fridge 6 years ago. 13 months after purchase I had to replace the compressor. Last month I had to replace the water drip pan. Now the fridge is knocking and hissing again and warm inside. Compressor needs to be replaced. I contacted Whirlpool and they said 6 years is old for an appliance. Seriously!?? What about 13 months when the compressor went? They obviously dont stand behind their products. They are unable to admit I got a dud. Im so disappointed and frustrated. Stay clear!!!

Whirlpool and their extended warranty is a ripoff! I bought a Whirlpool refrigerator not even two years ago. It has stopped working 4 or 5 times, causing us to lose all our food. When it is working, it makes an awful noise. I have renewed my contract with A&E due to the fact that the frig is a lemon; which A&E is a joke as well. I contacted them 2 weeks ago about the frig not working again. They stated they could not come until Sept 18th, a month later. Come on. Really. They are a ripoff as well as Whirlpool appliances. False advertising is against the law. I also contacted the merchant where the frig was purchased in Hazlehurst GA, who does not care one way or the other. If whirlpool was as great as they seem to think their appliances are, they would replace this lemon in my kitchen. We are elderly and are not able to keep dealing with this issue. I would never ever recommend a Whirlpool appliance to anyone. As a matter of fact, I will tell everyone I know not to purchase one; due to the way your company has treated me and my wife.

I made the mistake of buying a whirlpool product and was wondering if there is a support group for angry unsatisfied customers? I have owned a duet washer and after 2.5 years is giving F1E2 error and is junk.

I bought the Whirlpool model e2h50rd045v electric water heater to replace my failing gas water heater on July 21, 2014, and had it installed a couple of weeks later after a little over 3 years of use. The water heater is still working with no issues or major problems. I'm happy with the decision to purchase this water heater.

I just wanted to post a quick response to a problem that so many people are having with their Whirlpool FG1H5040T3NOV Hot Water Heater. The biggest problem is the Pilot Light Wont Stay Lit. Ive had this water heater for many years now (since 2005) and two days ago we didnt have any hot water. I checked the heater and found that the pilot light was out and that when I lit the pilot light with the igniter, it wouldnt stay light. This could have been a number of problems causing this issue but heres what I did to get it fixed. I looked around on the internet and saw that many people had this same problem and several years ago Whirlpool gave out warranty replacement upgrade kits to fix it. I called Whirlpool support, gave them my serial number and mentioned the upgraded kit. Unfortunately, my 9-year warranty expired a few months ago and I am no longer able to get the upgrade kit for free. Apparently this upgrade kit was part of a settlement for this water heater that was sold through Lowes. The upgrade kit has a few enhancements including an adapter to allow the use of a standard right hand threaded thermocouple as well as a larger pilot light window and added safety thermal switch. This is definitely an improvement over the old.Anyway, I looked at Lowes website for this upgrade kit and their description and internal part number is slightly different but it is the same thing as confirmed by Whirlpool. Whirlpools part number is 6910813 for the conversion kit. Lowes calls this part American Water Heater Company Gas Enhancement Kit 5040T NG. This kit is only $35 which isnt bad. So, I went to Lowes, purchased the kit. The instructions are included and are even good for a novice. It took me about an hour to complete the changeover. Youll need to remove the old burner and orifice to use them on the new kit. I then checked for gas leaks. I lit the pilot and when I turned on the heater, the burner lit right up. All is good now!

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

I purchased a Whirlpool dishwasher and refrigerator/freezer from Home Depot. Within weeks the stainless steel on both products began rusting. They sent a third party repair service to look at both products and determined that, in fact, the stainless steel was rusting. Our technician said that both the dishwasher panes and the freezer doors would be ordered and replaced the following week. This was on September 4, 2015. After several promised arrival dates, the parts never arrived. I called both the third party repair company and Whirlpool on several occasions only to be told they were on back order. Finally, in late November, the new dishwasher panel arrived and was installed. It is now December 17, 2015 and our freezer door is still on back order. When asked what my options are, the Whirlpool representative simply said we have to wait. I said that because I have been so terribly inconvenienced that they should just come and pick up this piece of junk and replace it with a new one. Evidently, that is not an option. I will NEVER purchase a Whirlpool product again as they do not back their warranty. I now have a $2,000 rusted refrigerator freezer to adorn our beautiful Christmas kitchen. Thanks, Whirlpool. Youve certainly made this a Merry Christmas. (Yes, sarcasm in play.)

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

I purchased a Whirlpool Cabrio washing machine in October of 2016. This has to be the worst purchase ever. I agree with most of all complaints I have read. I am using more water, electricity and time to get one load half clean. How can this be efficient? The only problem I dont have is the noise; very quiet as if it goes to sleep. Seems to me the company has misrepresented this machine in its claim of being high efficient, washing (cleaning) machine. I too say Do Not Buy this Machine!

This washer was purchased on 12/21/2007. It was in a vacation home that was rarely occupied, therefore washer not used much. On 7/23/2008 the cycle switch was replaced. On 7/20/09 the same problem occurred. The washer may have been used 5 times during the year. The handle and rim also needed to be replaced. On 8/31/09 the switch and handle were replaced again. On 2/5/13 the door latch was BROKEN AGAIN. Now on 7/10/15 the door latch, start switch and cycle switch are broken again... DO not buy WHIRLPOOL products.

If there had been a choice for no stars I would have given it none. I bought the Cabrio washer and dryer 2 years ago and been dissatisfied from the beginning. It was recommended to me by the repairman who gave me the bad news that my old Whirlpool was not repairable. I suspect that his recommendation came from the fact that it has a good record with regard to repairs and not that it did a good job cleaning clothes.I thought that perhaps there was a learning curve and I would figure it out. Not so. This washer leaves stains, sometimes even not getting something thoroughly wet. The washer does not get clothes clean, especially whites. I have replaced two sets of white towels because they were never entirely clean and eventually became so dingy that I donated them to the Humane Society. I tried using Oxy Clean and even bleach, but nothing works in this washer. Any workout or sports clothes I soak first in the sink because not doing so results in smelly cleaned laundry that has to be repeatedly washed to remove any sweat odors. The final straw came when I washed a small fleece dog pad and it came out of the washer with one third of it not ever having touched water. I tried explaining these issues to Whirlpool customer service agents, who blithely informed me that Whirlpool can do nothing to help. So, I will donate this heap of metal to anyone who is willing to take it on and never purchase another Whirlpool product. Incidentally, I submitted this review to the whirlpool review site and they refused to publish it.

As very happy owners of a previous model of this fridge freezer when ours needed replacing, we went direct to Whirlpool and bought the latest model. What a mistake! Other comments on this site are so accurate if only we had seen them before. A kitchen floor covered in ice mush (cubes seem out of the question) and tepid water from the water dispenser whereas on the previous model it was chilled. Basic functions that the previous model excelled at. Sadly it is also badly designed inside the fridge. We raised these issues with Whirlpool within our first year who merely said sorry you are unhappy and thanks for your comments. Be very wary of Whirlpool products and service.

I had purchased a hot water heater on Saturday and installed it myself. I filled the tank and waited about twenty minutes before turning the power on. I waited a couple of hours before testing the water temperature and it was cold. I checked the temperature setting and it was set at one twenty five, I went to Lowes and informed the service person and was told there was nothing they could do about it, I had to call the number on the tank for Whirlpool. I called the number and was told they could come out to check it but we would be responsible for the labor charges. I didnt understand why because it was under warranty and we had also purchased the extended warranty. I informed my wife so she could deal with Whirlpool because I was going to work. My wife called a number of times and was getting transferred from one person to another and getting no help at all. She was told by one person that it was maybe a problem with the wiring in our home or maybe the plumbing. One person told her that it was not their problem. We had to finally pay an electrician to come out to look at it and had to pay him to replace a heating element. The cost of the electrician and the part came to an extra two seventy five dollars. The only real help that we received was from Lowes managers that were willing to take the water heater back if we could get an authorization number to return the water which Whirlpool claimed they did not have any type of a number. Our 400 dollar water heater turned into an almost 700 dollar water heater. We had also purchased a refrigerator from Lowes that was the Whirlpool brand that quit working after about four months and we had to pay to have it fixed. Needless to say, we will never again purchase any Whirlpool products or recommend them to anyone. The service was very very poor and we are not happy with Whirlpool.

My 5-year-old Cabrio started coming up with error codes, and not draining and spinning the clothes. I called a week ago, they offered me 2 options, one being put $339 on a credit card and that would cover all parts, labor, and a 1 year extended warranty. They charged the credit card immediately for the biggest piece of crap washing machine. Someone came out 2 days later and told me he has worked on a lot of Cabrios but never one in quite that condition. I was led to believe that after charging the credit card, boxes would be arriving with parts to fix it. I called 2 days later to find out the status of when it would be repaired and they told me they already put a credit thru on the credit card because to fix it would be equal to the price of 2 brand new washing machines, and they will do nothing to honor that agreement. So I now have a piece of ** in my laundry room and takes me two days to do a load of laundry. DO NOT BUY THE CABRIO! In fact Im not going with a Whirlpool ever again!

The ice maker only makes enough ice for two small glasses. I wish Whirlpool would buy it back and let me buy a new side-by-side. I have to buy bags of ice because of this. I truly am very unhappy with this Whirlpool with the freezer at the bottom. For what I paid for it, this refrigerator is not worth the money. The model is G165DRXY07.

I bought a Whirlpool over the stove microwave. It was to replace a GE that was over nine years old. 40 days after purchase and installation the plastic started chipping and peeling. I contacted Whirlpool customer service and was told that it was a cosmetic problem and my warranty stated that I had thirty days of warranty on cosmetic problems. This was a problem because chipping and cracking didnt happen within 30 days. The chipping and cracking continued to get worse. I again called customer service because the warranty stated that workmanship and bad parts were covered up to one year. I was told that because it was over my stove that this was to be expected. I thought this was a dumb answer because had I known that an over the stove microwave would have problems from cooking I would have installed it in my living room over the television. I called customer service several times. One of the times I called I talked to a representative who actually acted as if she wanted to help me. She suggested sending an e-mail with pictures and gave me an e-mail address. I did this and got no response. I was getting close to the warranty expiration date. I called again and was told that pictures wouldnt work; I would have to pay to have a serviceman come out and write a statement saying that it was not cosmetic. The cracking and chipping is so bad that I cant clean parts of the door because the cloth or sponges catch on the cracks. The door on the GE microwave did not look as bad after nine years of use as the Whirlpool does after 1 year and 8 days of use. I am not the smartest person in the world but I know the difference between poor quality material and workmanship as opposed to cosmetic problems. Im pretty sure that if my wife put her makeup on and pieces of her face started cracking and falling off she wouldnt want to hear that it is not a real problem its only cosmetic. Bottom line is I am very dissatisfied with the poor customer service and warranty problems I have experienced. I will not buy another Whirlpool product and would strongly suggest to others to buy any brand but Whirlpool.

This has been our second Whirlpool Hot Water Tank in our home in the past 14 years. The first was installed by the builder, when it went out we purchased a larger capacity one from Lowes. It was professionally installed and now, after the extended warranty coverage period is expired, its expired as well. I would think you should be able to get more than 7 years out of not one, but two Whirlpool hot water tanks. No wonder they are no longer manufacturing hot water tanks - they sucked at it. Also, if you do have one, you have to get parts from Whirlpool and pay $30 shipping. No thanks, for the cost of parts to replace everything youre better off getting a whole new unit.

I purchased a Whirlpool 4.3-cu ft top load washer with a stain steel basket, in March 2020. Machine is able accommodate comforters, automatic water level adjust to loads. Washer has an extra rinse and spin feature. Low noise when operating. I would purchase washer again.

I purchased for over a thousand dollars a whirlpool propane hot water tank. Three months later the safety heat thing that turns it off is defective yet I have to pay for shipping on this. Then again every three months. Its been a year and a half and the damn thing just blew up and almost took my house with it. I paid for a product that works not one that needs replaced yearly. But do they care? Nope. 2 weeks before someone can even look at it. I plan on reviewing until whirlpool isnt purchased by anyone again. This is a brand that was supposed to be quality, instead its just a scam!

I purchased a Whirlpool duet front load washer 1/2013 new from Lowes. In 5 yrs it is my 2nd washer of Whirlpool. After 2 1/2 yrs, the bearings have gone out, also every time I run the cleaning cycle, water leaks out under the washer. My boyfriend looked the parts to fix the washer, since I called Lowes concerning the warranty and its out. Cost to repair, just in parts would be around $400, I paid a lot of money for a product to last only 2 1/2 yrs. Such a lack of quality in workmanship. With these price, there should be better quality. Do not purchase a whirlpool. 2 washers for them in 5 yrs is not a great track record.

I purchased this Whirlpool dishwasher from Sears on 3/25/2010. Then on 8/11/2012 the dishwasher completely failed to operate. I called for service and they checked it out and they found out that the control board had failed due to moisture getting into the electronic components. They replaced the control board & control panel and the dishwasher has worked until today (2/08/2014) - 17 months, and now exhibits the same problem. The original repair costs including labor was over $400. Not really acceptable and demonstrates very poor quality control and design @ Whirlpool. As of now, I am considering whether to purchase a new machine (obviously neither a Whirlpool or Sears product). As part of the original service the soap dispenser also failed and had to be replaced. I believe Whirlpool should be responsible for some of the repair costs.

So far this washing machine has been perfect. Its a top load not front load which I prefer. Im not a big fan of how it locks and I cant throw other stuff in once it started. Other than that Im very satisfied.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

When you first get the washer it looks like it can get the job done. Its the brand name and you trust to get the best clean from the washer. After a couple of months I dont see them clean. It washes with a couple of shakes back and forth and when my clothes are ready they seem like they were dipped in water. Not clean. It has all these fancy buttons for all different types of cycles and loads and they all seem to wash the same. As a mother of 3 kids I want my kids to put on CLEAN clothes. Not clothes that look like they have just been dipped in the water with detergent. I feel a good on cleaning board and my hands do a lot more than these high priced washers.

I purchased a Whirlpool Microwave on 9/21/10 from Hamilton-Bryan in Wichita Falls, Texas. I had a small fire in my microwave on 9/19/11, due to a faulty mica board. This was replaced by Mr. Bobs in Wichita Falls, TX, under the warranty. Then on 1/9/12, the microwave would not warm anything. I called Mr. Bobs again, and they said the transformer was out. I called Whirlpool, and was told by Yvonne that Whirlpool would replace the part only, with no labor, but Mr. Bobs was closed, and to call back in the morning, so this authorization could be set up with Mr. Bobs. I called back and there was no record of my call with Yvonne. I talked to a supervisor Rachel in Tennessee. She put me on hold for a while and finally said she found Yvonnes note to authorize the part. I explained to each person I talked to that I was dissatisfied with Whirlpool. I believe I have a defective microwave. I would like my money back, or a new microwave. I believe the defective mica board is related to the defective transformer. I am a very dissatisfied customer. I have used Whirlpool most of my adult life. I have used them since the 1970s. I currently have a Whirlpool refrigerator, washer, and dryer. A similar situation like this occurred when I bought a Samsung washer. I was dissatisfied, and Samsung refunded my money, and I bought a Whirlpool washer to replace Samsung. I will not be satisfied with this situation, until the microwave is replaced. Thank you for your concern and attention to this matter.

The washer (Cabrio WTW7800XWO) was less than 2 years old and we had a motor go out, so we paid a repairman to come out and repair the machine. The total cost was over $300. Now 2 months later, we get another code on the machine and Whirlpool says, We are sorry but there is nothing we can do, but if you would like to pay $219, we can get a repairman out there to check out the machine and repair it. Theyre also giving the machine an additional year warranty. Shortly after that, I noticed the lid was not staying up when I opened to put clothes in it to wash. So since I was wondering what was happening, I looked at the lid and to my surprise, the springs that hold the door up when open are built into the plastic lid cover that has a see-through glass on it. Right where the springs are located, it must be a stress point and the plastic lid has since cracked and is almost about to break off. I am now in the process of ordering another lid and Whirlpool offered to sell me a lid for $226 but I think I shall buy it from someone else as I dont want to put any more money into Whirlpools pockets. We paid over $1000 when we bought this machine. Now it is about 2.5 years old. I hope there is a class action lawsuit on Whirlpool as I will definitely join in if there is. This company needs to go out of business if they continue to sell machines like this that have so many problems especially when they are less than 2.5 years old. Goodbye Whirlpool. You have lost many more customers as I shall be letting everyone I know about all the problems and complaints about this machine.

Whirlpool hot water heater - The water coming from the faucets when it is hot is red. Therefore, I contacted Whirlpool and was informed that the anode has failed. The anode is not covered because, according to this company, it is not considered a working part. It baffles me that the anode is not a working part since it keeps the tank from rotting. I have only had the hot water tank for three years and this part has failed causing my hot water to be red. Since this company contradicts itself, I either have to live with red hot water (rust) or replace the part on my own. Unlike your company, Lowes has customer service. They apologized and will be paying for half of the expense for the part. Unfortunately, I still must pay for an employee to replace the part. This whole situation is absolutely ridiculous. I will never be purchasing another item from your company and in addition to that, I will tell everyone I know to avoid this company at all costs. You should strongly consider revising this policy before you lose all of your customers.

Ice maker has stopped making ice on several occasions. Also when you try to get ice out of the door dispenser, it will continues to release ice but will not go down the chute and when you open refrigerator door it spills out all over the place. Getting ice other than from the door is no easy task. I have taken to putting a bowl under the ice dispenser. Interior of refrigerator is not user friendly for positioning items. Bought in a hurry back in 2017 and have regretted it ever since.

I am so thankful that there are others who are having the same problems with their washers. Since 2006, my husband and I have had words regarding who is not loading the washer right, why are the clothes still dirty, and why does the dryer have so much lint. The excessive amount of lint ruined my dryer. I get UL codes all the time! Before the UL flashes, it sounds like someones trying to break in. It is 2011. Despite the problems, it has not died yet. I am selling it and will never purchase another from them again. I have the dryer and it went out 2 years ago. It has problems with the motor. You can guess I did not buy a Whirlpool.

My silverware, when it is washed, a piece or two comes through one of the openings in the basket and I have to work it out before I can lift it out of the dishwasher (MOD WDP320PAD50 Serial #F4432749) to put the pieces away. Please update your dishwasher by making the openings smaller for the silverware so I can stop cussing. Send me a new basket when you do. The dishwasher was in a new home I bought.

I havent had my Whirlpool Cabrio washer for even 5 years and I have had to replace the glass lid and now the tub bearings need to be replaced... I have read countless complaints for the same issue. I feel like Whirlpool should at least send out free replacement bearings and the $85.00 bearing press tool that you will need if youre handy enough to fix the problem yourself. PS to all of the poor victims of Whirlpool bearings, go to Amazon and you can buy the bearings and the tool for about $150.00. You will need to order bearings part #10435302 and the bearing driver tool #w10447783... And as far as my matching dryer - knock on wood - it still runs great.

Updated on 03/15/2020: We bought this eight years ago to replace a 20-year-old Maytag that had finally developed a rust-related leak after serving us faithfully and needing only one almost trivial repair ($10 DIY lid switch replacement) over that period. I have replaced the water pump, the gear case, rotating seal (3 times), the lid switch striker (3 times), and the replacement gear case is making noises indicating incipient bearing failure. In its finite wisdom, Whirlpool decided to make the failure-prone main bearing irreplaceable, which means you have to replace the entire gear case, at a best-case cost of $120 and a worst-case cost of $300, plus labor, unless you do the work yourself, as I do. The secondary issue is mold and a musty odor. The most effective way to eliminate this is to pull the drum (non-trivial, requires a car jack, a 2x4, and a special spanner/wrench) and swab down the inside of the tub with disinfectant. (Been there ... done that three times over 8 years.)Original Review: I am in the process of replacing the bottom seal on my 6-year-old Whirlpool Cabrio (WTW5500XW2) washer. This will be the fourth major repair I have done on it. Fortunately, I can do the work myself and know how to find the best price on parts, but it is still discouraging that a lightly-used washer would have so many problems in such as short time. (It replaced a 20-year-old Maytag that finally rusted out.) Repairs to date: 1) replaced drain pump motor; 2) replaced lid switch; 3) removed basket twice to clean outer tub, due to mold and odors; 4) replaced suspension rods due to excessive spin vibration; 5) out of commission awaiting a new bottom seal. Total cost of parts (labor was on me) is well over $100.

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

My wife and I purchased a brand new dishwasher less than a month ago. It stopped working after less than a month. After waiting hours on hold, the service company they sent out, went out of business before the appointment. Now after 3 months of nothing but frustration. I have written many emails and none have been replied back to. Worst customer service ever!! Not not buy Whirlpool or Kitchenaid (same company).

The inside glass of the oven door shattered. I have not used the oven for months. Only the the top cooking burners have been used. Its a mystery to me!! I have read complaints where the glass shattered while the oven was in use or being cleaned, but have found none where this happened to a cold oven. The large front burner is too hot. Even on the lowest setting everything burns. You cannot simmer, only boil. The control knobs have (in my opinion) no safety mechanism. I thought that the control knobs on stoves needed to be child proofed, hard for a child to turn on. My last stove you had to push down quite hard then turn to the setting. Not this stove. I have to be so careful when Im cleaning the area around the knobs. The slightest pressure and the knob turns. When I first purchased the stove while cleaning it, I unknowingly turned the knob and the kitchen filled with gas before I realized what had happened. I called Whirlpool thinking something was broken. They sent out a repairman. Nothing was broken. That is the way it is made. Customer Service said they had had no other complaints about the knobs. I find that hard to believe. My toddler grandchild can turn on the stove with ease. Im sure other concerned parents etc. have had this complaint. To sum it up... I will probably never purchase a Whirlpool product again.

The door handle is cracking on my Whirlpool microwave. This is a poor experience with Sears. My original door was smoked up from a kitchen fire. I replaced the door and handle in June. My boyfriend does all the cooking, so I did not notice the handle until November. It is cracking on the side. We contacted Sears, and they said it was past the warranty. This problem is due to a defective product. I have seen several similar complaints online.

Whoever came up with the idea of this AquaLift oven cleaning method should be fired! This method does not work. Ive barely used my oven but had some cheese pizza drip on it so thought I should clean before using again. What a JOB! The spill did not come off the bottom entirely and using the non-scratch scrubbing sponge was a joke. There is some soil on the sides and back of the oven that I will have to use elbow grease to get off and Im going to have to crawl into the oven to see if they can be remove. Welcome back to the old days before self-cleaning ovens!

Mind you, Whirlpool products that we have purchased in the past have been satisfactory, but gas hot water heaters, no! About four years ago we purchased a Whirlpool hot water heater that went out in a little over a year. After spending many calls and time, we found out that the HWH was on soft recall. Whirlpool credited our account, but this was to purchase another Whirlpool, which we did. We paid for installation. About 2 years later, it has gone out. Same problem. Lowes says not their problem. Whirlpool says it will pay for the part only. Plumber will cost 150-200 dollars. All the plumbers I have talked to will not repair them, then they are held responsible when it goes out! As a disabled Vet I cannot afford to throw 400-600 dollars away. And, Whirlpool tells me that if they give me an RA number to replace the HWH, it will have to be a Whirlpool from Lowes. Great! Whirlpool quarterly report looks very good. Mine doesnt look as good. What can be done about a poor working product? Or is this too big to fail? Let me know.

The reason for the call was to find out how to file a claim after replacing the ice maker and paying for it the 3rd time, they were very argumentative and would not listen to me about the design flaw in the wire harness that burns up the motor for the ice maker. I found out about the design flaw from talking to the repairman that replace the ice maker who works for Dick Kearsley Clearfield UT. He told me that Whirlpool knows about the problem for the 22 cubic foot and 25 cubic foot refrigerator and that is why they have 2 different new wire harnesses in the box for replacement of the old wiring harness.

I have had a plumbing company work on my Whirlpool water heater three times in the last two months. On the third visit, he told me all the problems customers have had with Whirlpool water heaters. I decided to call Whirlpool for warranty purposes. The unit is three years old. I was told that it was the gas valve, and I was given a free one from Lowes. After installing the new valve, it still did not work properly. After troubleshooting with a technician, I was told it was the orifice. I have had to do all the labor myself, and I dont know how long this is going to go on. I have heard Whirlpool will continue to give you the runaround (from the plumbing company and Lowes salesmen) and will continue to give you the runaround and not replace the unit. They are wearing me down. I have been without hot water for three weeks with no end in sight. I am ready to give up and just buy another water heater but certainly not a Whirlpool.

We bought our Terrorpool Whirlpool refrigerator in 2006. We have had problems with the ice dispenser, bad motor replacement, and now we have cracks all down the right inside wall. I had bought an extended warranty of four years at the time of purchase which covered the cost of the previous problems. But it has now expired, and I was told it would be my expense for repair. What happened to reliable appliances that our parents and grandparents had? What happened to the name Whirlpool? I will never buy a Whirlpool product again, not to mention the customer service (which I wont mention). If you have model # ED5PHEXRQ00, please write about any problems you have had and help someone else not make the same mistake.

Cabrio Whirlpool Washer - Bought this washer from HHGregg in Orange Park, Florida. This washing machine is horrible!! It does not fill the tub with water enough to even cover the clothes. Some of the clothes are not even wet. They just sit in dirty water, no agitation. Then it refills with water and the rinse water is dirty, there is no agitation or movement during the wash cycle. My clothes are stained and dried food and dirt are still on the clothes. My white clothes are now gray. This is the worst machine. I have tried everything. I am now hand washing the clothes and trying to add water to at least cover the clothes but the sensor just drains the extra water out. This machine is less than a year old. There should be a class action lawsuit against Whirlpool. I am not the only one; everyone that has this machine says it is a nightmare.

I purchased a Whirlpool Refrigerator Model # WRF990SLAM00 in May of 2013. My wife started noticing ice build up on the ice maker in the refrigerator section of this French Door model. We had it serviced for the same problem 4 times and the problem still existed. At this point, Whirlpool offer to give us our money back, and here is where things got interesting. My wife spoke with a Sheila who was to issue a check to a third party company who would then pick up the refrigerator and give us the check. Sounds simple enough, huh? The company was to get the check in 7-10 business days so we bought a new refrigerator, a Samsung this time, and scheduled its delivery for the time frame we were told the non-functioning fridge would be picked up. My wife could not get in touch with Sheila, which was always a problem, and we talked to a Beth who told us that this whole process had not even been started yet. Well, we are having our new fridge delivered and still waiting on our check and for someone to come and pick up this American-made piece of crap! We wanted to buy American, but this is what we got, a piece of crap!!

The lower door closing cam has been replaced at least twice. The door continues to make a very loud noise when opening and closing. The refrigerator, a 2007 model came with the house I purchased in 2012. The refrigerator works very good, but the loud noise from opening and closing will wake a hibernating bear. The last repairman (from Sears) told me that the doors had been recalled, but I dont know who to contact or how to go about getting the replacement doors and getting them installed.I have a Home Warranty, and they sent Sears out twice to repair them, but after opening and closing 2-3 times, they go back to the loud noise. I have no idea where the refrigerator was purchased. I dont really want to rate my experience since I think the repairmen did all they could. I simply think this is a bad manufactured door problem, and I just want them replaced. The refrigerator works good, and I cant afford to purchase another just because of the doors.

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

My whirlpool Cabrio washer top load had the rust problems, bearing problems, support arms replaced along with the complete drive assembly motor bearings and all the parts. My bearings have failed 3 times since 2009. This machine is junk. Customer service at Whirlpool is a joke. They treat you as if you have had to do something wrong. Finally I spoke with a salesman who said speak with the warranty company. I have the extended warranty which I advise everyone who purchases an appliance to get one. So I spoke with them and they sent me a check for a new machine. I must say our warranty company has been very helpful. So THIS IS MY WARNING TO ALL. PLEASE DO NOT BUY FROM WHIRLPOOL. IF YOU DO YOU DESERVE WHAT YOU GET, SORRY TO SAY... Have a great day.

My new fridge is extremely hard to open. The technician that was sent out told me that there is too much suction building up inside the fridge and freezer and that is why it has to be yanked to open. This is not only annoying it means the fridge is constantly being pulled forward out of place. Technicians solution was to deactive the castors under the fridge. At the time he was here I did not realize that I could then no longer move the fridge out of its place to clean. I called Whirlpool and complained and was told that they could do nothing more for me because the fridge is in good working order. I hardly would call this good working order. They also informed me that if I wished to clean under the fridge or the coils at the back it would require a service call to move the fridge and I WOULD BE CHARGED EACH TIME. Needless to say I AM VERY, VERY UNHAPPY WITH THE WHOLE SITUATION.

Have a warranty with them to get reimbursed for repairs for a year. Have had to use it twice now for the same part. Customer service told me itd take two weeks to get a certified repairman of their choosing to be reimbursed. Two weeks to go without a fridge is their solution and they have no other repairmen working. So I ask to speak to a supervisor and the representative tells me she wont transfer me out because thats the way it is. Paid out of pocket to get it fixed immediately instead of waiting.

From day one I was not happy with the new auto fill washer, I was told I just needed to get used to it! Well I have tried every cycle available and no matter what I try cloths don’t come out clean, using the deepwash cycle Sheets on top were still dry once cycle was completed!! Give me back my old washer! Washed much much better.

I’ve had this washer since October 2018. Worst purchase ever. It does not clean the clothes nor does it put enough water in it. I’ve tried the deep water option too and it’s for sure still not enough. I don’t understand how they even thought that this was perfectly fine to sell. If I could’ve taken it back a month after having it, I for sure would. And no one will buy it because they’ve read reviews of how it’s terrible. I wasted $900 on this washer. I have the dryer also which works amazing. The washer just sucks something terrible. My husbands military uniforms always look dirty and a lot of the clothes aren’t ever wet. I’ve finally seen a picture of how you’re supposed to have clothes in there. Why in the world would you only allow barely a layer of clothes at the very bottom to be cleaned by the agitator? Why would you have this huge drum only to put not even a load in there? This was such a waste Whirlpool and I’m glad I’m not the only person who has the same issue. I will never purchase another Whirlpool washer, it’s upsetting I can’t currently get rid of this crap washer I have now.

I was searching online and stumbled across this site. Funny that there were so many complaints about the console on the ovens, considering that my issue was with the console on a dryer I purchased. I have only had the dryer a year, and it stopped working. There is nothing else wrong with it, no codes, no problems with the lights, or anything else. A technician came out and found that it was a small plastic and metal button piece that helps the press here: spot on the dryer panel to connect to the start button on the console. The little arm had broken and the switch no longer worked.Figured we would have to purchase a new button. NOPE, apparently we were told that we had to purchase a new console (over $200 dollars, close to $300 with shipping)???!!! We were also told that wear and tear can cause the issue. Wear and tear?? On a dryer thats maybe run once a week for about a year? Try again, I think I need my boots because it sounds like horse** to me. I think I will pass this information along to people I know that are technicians so that they can let people know not to purchase from this company because they obviously arent going to address the situation. I think I might also utilize social media to let people know so that they dont have to go through this much aggravation. I certainly dont know what we are going to do, since it took me a year to pay that dryer off, I cant afford another dryer at this time. So unfortunately with a new baby on the way, you wont get any sympathy from me if your company takes a character hit.

Kitchen Aid is Whirlpool - Buyer Beware. 1.5 year old dishwasher Model #KUDS35FXSS8 lost power, repairman came and confirmed it to be the panel control and the part is back ordered 4 weeks out. Expected to come day before Thanksgiving, repairman cannot schedule until part arrives thus no guarantee date of fix. Found part online from AppliancePartsPro.com. They shipped it one day later - fixed dishwasher. Whirlpool will not stand behind part because it did not come from them. I have all the proof that it is a Whirlpool Certified Part from a Appliance Parts Pro. Appears Whirlpool would rather have a broken machine in a home rather than help the customer fix it.

Our $2000+ Whirlpool Gold just had the control board fail. After calling Whirlpool, local services and all national parts suppliers we were told each time the part is on back order until June. If this is Whirlpools way of generating new fridge sales, it does not work. No Whirlpool, Kenmore, Frigidaire or KitchenAid, all made by the same company will ever enter my home. The control board runs the fridge. Which executive thinks a family can live without a fridge for 4 months? What terrible service. GE always has parts and service. Go with GE everyone.

Whirlpool Cabrio Model WTW6500 - I ask all of you to stay away from the Whirlpool Cabrio sets. I have spent hundreds of dollars trying to fix my washer. I just spent $260 for a computer board. Now it stays on rinse cycle. So now I need the motor sensor harness which is another $90. Service call $80 x 2. So, now I am going to take the computer board back and get my 260 dollars back. For the cost of $400 to fix this washer. You can go and buy a new one for around $400. Then, Im going to the lawyers to file a class action suit against Whirlpool. So, owners; be looking in your mailboxes for a class action suit against Whirlpool for those who own the cabrio set. Im tired of having to deal with whirlpool customer service. Maybe, whirlpool should think of having their laundry made back in America.

Whirlpool Duet $1300, in the past we had great service from other Whirlpool products. Just a more modern look and knowing it was a company we had used in the past with very little or no problems so we expected the same only with energy and water savings. We are energy aware and believe in conserving energy and water where we can. My wife wanted to stick with the brand that gave us good service in the past and chose one of their most conservative units on the market (I believe it was based mainly on looks). What burns me the most about this unit is its constant consumption of clothing, the repair guy found nothing askew with the unit and suggested smaller loads. So we reduced the load size smaller and smaller till we were washing each outfit separately and guess what, it still ate clothes, just chews them up.We lose about a hundred dollars a month in clothing. This washer tears holes and shreds clothing on almost every load, I have to put shirts and lighter clothes to the back of the washer then load the heavier blue jeans and such toward the front and hope they finish in the same position or something is ruined. The fabric becomes distressed, stretched, shredded or has holes, or any combination of the above. We have taken to going to a laundromat or sending clothes to the cleaners. These units are three years old and we are now looking for a replacement for the washer because the local service guy won’t even come out any more. This problem surfaced within a week of the first use of the machine and has remained steady, as we are retired and travel a lot we are not always using them so they are what I would term very lightly used.

My new fridge is leaking large amounts of water on the floor, but it is not from the ice maker, as it is not hooked up. I have a Whirlpool refrigerator, model number GB2FHDXWS04, purchased in August of 2010. It was with good faith that I chose what I thought was a high-quality product, as well as, it was chosen because it was made in the USA and would be supporting US families, not China.Within one year, just as soon as the one-year warranty expired it began leaking water daily, all over my wooden kitchen floor, causing the floor boards to begin buckling. It is not from the ice maker, as it is not hooked up. Not only is my floor being ruined, but my one-year old refrigerator is not working up to standards, for which I chose the Whirlpool brand. My refrigerator has been maintained and operated by all instructions provided for this product.I assume that this company no longer wants to be in good standing with its customers, and refuses to make good on a major problem, for which a large amount of money was spent on a high quality serviceable item, by paying for the repair or replacement of obviously defective parts, or by the replacement of the entire refrigerator.

Whirlpool Washing Cabrio machine model WTW5500XW0 - I purchased this machine five years ago. After about a year I started having problems where the clothes were not coming out clean. I contacted Whirlpool and was referred for a repair. The repair man told me these newer machines need the Affresh product to clean out the machine so this doesnt happen. I bought the Affresh product and there is still a problem. Every load of wash has to be put back in for another rinse cycle, sometimes two rinse cycles. Its ironic because the cover of the booklet for the machine says low-water washer which was the selling point to buying this machine. Instead of using less water, Im using DOUBLE the water.

The shelves in freezer don’t lock into anything so if you don’t balance the food right on the shelf it will tip over. I had to replace the fan motor in freezer. The refrigerator is only 4 years old. The little tray under the water and ice outside of door if you shut the freezer door too quick water from tray goes everywhere. The water filter cost $50.00. If you have bad water you will need to change it twice a month.

Just about three years old our washing machine started making a horrible noise and soon after a horrible smell. Won’t complete spin and dry. The bearing inside the drum has failed. The pump is making an unusual noise. I see a lot of reviews about this product. I find it strange that it appears to have a good rating at all the advertisers but in reality it’s really a horrible machine. Shame on Whirlpool for our landfills, dumps and recycle bins with absolute garbage plastic and metal Has to be recycled. We have only disposable garbage for appliances.

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

I purchased a Whirlpool washer and dryer from Sears in April of this year. Here, to date, I had to call four Toms to have this unit repaired. I contacted Sears to have the unit replaced. I believe this particular unit needs to be recalled. Sears informed me that the unit must be assessed by one of their qualified/certified technicians before a request to be valid. I have concerns about this statement. Employees will not go against their company in fear of retaliation. In addition, I paid cash for the unit and now cannot get my money back. I’m dissatisfied with Sears and their values.

I purchased a Whirlpool Duet washer and dryer set in 2008. The washer control panel lasted 3 years. Because I did not have an extended warranty, Whirlpool would not do anything to accommodate me, despite the exorbitant cost of this machine. I told them that I would never buy another Whirlpool product. It is now 2017, and I have not purchased any other product made by Whirlpool. I want to make sure that a company manufacturing expensive machines designed to break within only a few years of normal use, goes out of business. Spread the Word to everyone you know about Whirlpools garbage machines. Maybe if enough consumers purchase products from other manufacturers, Whirlpool will get the message that they need to manufacture quality, long lasting machines. Try Speed Queen instead.

We bought a brand new Whirlpool dishwasher around 2 years ago. Within 13 months it stopped drying dishes, silverware etc. I called customer service told the person what’s going on. Of course the warranty was up, a month prior. She said she would send a service technician out to see why it wasn’t drying. They charge 75$ a hour plus a service fee for coming out. I told her no. She said she would drop the service fee since it was only 13 months old. I asked how long he would be here, she had no idea. I didn’t make the appointment because I felt I shouldn’t have to pay anything because it was only 13 months old.She didn’t agree. Since then it has gotten worse, it doesn’t dry anything, maybe the dishes. I have to put the silverware rack on a towel by and dry the silverware or put it away wet. I’ve bought jet dry a few different ones and no luck. I would not recommend anything from Whirlpool, especially a dishwasher. We have new wood cabinets. The cabinets will get soaked if I don’t put paper towels under them. This is the worst dishwasher I ever owned. Don’t waste your money!!

The machine was great and handled large amounts of laundry. It was very expensive but my wife was happy with its performance. A year and a half into owning it, the electrical code F70 comes up and it stopped working. When I checked online, I found it is a common problem. I contacted whirlpool customer service and they could not do anything. Spoke to the manager, Kiesha and she refused to help me even though I bought both the washer and dryer for a lot of money. Customer service is not a priority evidently. She denies that there is an on-going problem when both the internet and my service tech say differently.

Whirlpool Cabrio Platinum top loader 2014 model - This washer is an over engineered piece of junk. It takes forever to wash anything and it never gets anything clean. I wish I would of just bought the repair parts for my old machine which I had for twenty-three years.

Ive always had a Whirlpool washing machine and it has been extremely dependable. I have not had any problems with my Whirlpool washer. A Whirlpool has came a long ways with their pricing. It was very affordable for somebody like me and I cant afford a lot but I could afford this. I was very pleased with my purchase and with the product. They havent let me down so far.

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

This is my second Maytag French door refrigerator. 1st died after 5years. Bought the same again but bought an extended warranty. After 3 years, a month of service calls I still do not have a running refrigerator. Had to rent one from rent a center while Whirlpool sends more repairman. Try calling their customer service is where they got their name. They give you such a runaround they create a whirlpool. Product is junk.

Whirlpool owned or bought out Maytag. My Maytag Washer (purchased a dryer also) was a disaster from day one. The previous set I owned (Maytag) was 20 years old when I decided to replace it. From day one, the washer literally walked across the floor while turned on (Maytag Performa). I had to sit there and virtually hold it down if I wanted to get my wash done. I called and called and they would eventually come out only to tell me that this was a substandard product from Maytag and I had better buy the extended warranty. After only 7 years, the washer completely stopped working and the dryer (Maytag) is falling apart. I purchased new Samsung washer and dryer and I absolutely love them. So you whine all you want about Samsung underselling you. I contacted you several times and all I received was lip service. I will never purchase a Maytag or Whirlpool washer and dryer and I’ll let all of my friends know about your terrible customer service!

We purchase a Whirlpool washer model # WTW5000DWI, SERIAL #C842 43102 ON 10/30/2019 and it has been nothing but a disappointment. We are senior citizens living on a very limit income with several health problems, and cannot go to a washeteria to wash our clothes. We had a washer that lasted over 19 years and when the motor failed I figured it was more practical to purchase a new washer versus repairing this old one. We had a very reputable Whirlpool dealer here and was very helpful and recommended this washer and the price was in our budget! Was that a big mistake, it does not clean the clothes, does not rinse the clothes with using the 2 rinse cycle and still, does not rinse a load of sheets. I bought a large capacity washer so we could wash 2 sheets at a time. Wrong! You cannot get more than a couple inch of water on the Deepwater cycle, so its like washing clothes on a riverbank on rocks, it rubs clothes together. On my wifes good clothes it will cause little balls of fabrics on them, clothes does not smell clean, and if its real dirty clothes, it will not clean or take the stains out. Its water efficient alright, it does not use any water!Its for sale, and I have talked to a lawyer. Whirlpool customer service was no help at all/All they want was to send a dealer to check it out, the only problem if there is nothing wrong with it that will cost me min. of $125.00. Warranty will cover a manufacturing defect, not a design problem which is what this is. I will just go to small claims courts and get my money back and be done with Whirlpool, hell they dont care! I would buy any washer that is cheaper and has an agitator, without a water efficient features and is top loaded model. It does not pay in this world where large manufacturing companies dont care.

We have had our dishwasher for over ten years and have had no problems. Its been very reliable. Its a free standing unit on wheels with a butcher block top as we dont have room in the cabinets for a built in. All you have to do is roll it over to the sink and plug it in and hook up the water line which has a quick disconnect. The male half always stays on the faucet.

Model: Whirlpool Professional FF 32 Elite. Purchase date: 06/2009. Problem: Temperature maintenance issue. The basic need of refrigerator - unable to set/maintain temperature. The cooling system is not working! Poor customer service: Representative charged for visit. The representative is unable to find the root cause! Approximate expense of 4-5k with no guarantee of problem being fixed. Better go for other brands like LG, Samsung.

On July 30, 2009, we purchased a Whirlpool Gold French door refrigerator with the freezer drawer on the bottom. It was delivered on August 1, 2009. On August 3, 2009, the ice maker and water dispenser stopped working. After three unsuccessful service calls and the installation of various replacement parts, Whirlpool gave up the effort to fix the ice maker and water dispenser and delivered a new replacement refrigerator on October 15, 2009. Todays date is April 14, 2012 and here we go again, the ice maker and water dispenser stopped working. Luckily, I purchased a five year warranty on the unit. However, after reading all of the posts about fire hazard issues and other various issues with Whirlpool refrigerators, well probably go out and buy a new refrigerator and write-off the $2,500 that we spent for this refrigerator as a bad investment. We purchased a Whirlpool refrigerator based upon their reputation of providing sound products. However, based upon this experience, I can guarantee the folks at Whirlpool that our next refrigerator purchase will not be a Whirlpool product or a product of any subsidiary of Whirlpool.

I have a Whirlpool Cabrio washer and dryer combo. Recently, I have learned that the washer has a very common problem with the water pump. I have read amazing amount of complaints about this problem and apparently the company has nothing to say about this. The cost for parts and labor for replacing this pump is about $400.00, almost half the cost of the unit. This is unreal!

I purchased a washer model# wtw560xw, serial# c04830040 on 1/11/11. This product has never properly washed clothes. I have had 3 technicians come out and press buttons on my machine. The most recent supervisor I spoke w is Niki id# **. She said that the machine washes but is not supposed to clean clothes. I am getting blown off and aggravated. I filed a complaint with BBB that went nowhere. Someone from the corporate office named Amanda called me and told me she would look into it and a week and a half later, not return my call. I had to track her down for her to tell me she can do nothing! The hold times are always extended. I have a pile of ruined clothes and a pile that I am attempting to hand wash. I am beyond frustrated and need a machine that will wash my clothes. I am not in the 1800s. I should not be hand washing when I paid hundreds of dollars for this useless machine. I am ready to file a class action suit. I can be contacted at ** **.

NU40T61-403 have had problems since day one. First problem was while heating up would make loud humming noise. Whirlpool sent out plumber. He adjusted plate under tank. That worked for about 2 months. Then pilot started going out. They send same plumber out again, also sent replacement part. Problem was fixed however about 2 months after that started leaking and flooding our garage. Called company again, was told that is no longer under warranty and stated we need a thermal expansion tank. I stated “why would we need this? This unit is only a little over a year old. Im not going to purchase another tank. A water heater should not overheat like this.” Long story short my husband has been burnt severely from the pressure build up as he was out in our garage walking past the tank when it decided to release pressure even though no water was being used at that time. He ended up at the ER with 2nd-3rd degree burns. I called Whirlpool again and was only told we need to install the expansion tank. Im so unhappy with this product I will never buy anything made by whirlpool again.....

I have a model FG1F4034T3NOV water heater that was a problem since day one. The pilot will not stay lit, and apparently, there was some sort of class action lawsuit due to a defective part that I missed out on because I didnt know about it. The telephone representative is quick to point out that it is out of warranty due to the date of manufacture and that it needs about $200 in parts because I cant find the receipt from 4 years ago, when I bought it from Lowes. The company flat out refused to do a courtesy replacement for parts or discount them.

Machine just will not clean clothes. Model Cabrio W10560169A. Company offered NO support. This washer retails for around $1,000 and just does not work!

I waited years to buy this machine. I hate it!!! I agree with the other bad reviews. It destroys clothes. There is barely enough water in it to cover the bottom of the machine much less the laundry. Even deep water is a joke. It does not clean. I put it on the hottest water temp and I can put my hand in there and it is barely warm (it is not my hot water heater). My lightweight comforters come out all tacky and grungy in the middle. The softener dispenser (I use vinegar) dumps in the laundry (no it is not over full) (no I do not slam it shut). I can not let anything soak because the machine will drain after a few minutes and all my detergent, scent crystals etc. are all wasted. I feel like I have to take a survey and complete a questionnaire every time I do laundry. Can someone tell me how to put a comforter in there and leave that little middle eye open? They say the water saver is government regulated? Yup I need the government to do my laundry... I believe in saving water. I have a water saver toilet, shower, faucets. However I can not clean dirty jeans in a gallon of water. My clothes do not even get wet. How does whirlpool get away with advertising this machine can do king size comforter? The gentle cycle will tear apart anything I might put in there because there is no water and that blooming thing just twist and turns so it tears anything delicate. This is the 21st century. I think I should not have to babysit my washing machine. Why should I have to readjust everything in hopes it might be almost clean??? Place this here and that there, wipe the lint out before doing dark laundry. This machine belongs in the dark ages. It is so complicated yet it achieves nothing. A big rip off. I so tired of crying over this purchase. I hate this machine!!!

If you are in the market for a new washing machine, steer clear of the Whirlpool Cabrio (or any Whirlpool for that matter). We have had issues with ours from the beginning. We had Whirlpool techs come out and were continually unable to fix the issues. Eventually they told them that it was not broken, even though one tech told us it definitely was. After four service calls they just stopped sending out techs and told us too bad. Now after less than two years it is leaking from the bottom. Yeah, Whirlpool, theres no problem with it. Save yourself the potential headache and get something else. Anything else.

My wife and I purchased our new home in November 2014. The house was a foreclosure and therefore owned by a title company who gutted the home and installed all new appliances. Less than a year of ownership, the ice maker on the side by side fridge broke after normal use. Not having proof of purchase, I appealed to Whirlpool given the nature of my situation. They did NOTHING but try and sell me a new service agreement they offer to have it fixed. They cared little about my brand loyalty, situation or circumstances - all they wanted was to make more money off of the consumer. What ever happened to companies being accountable for the products they produce? What ever happened to companies wanting to do the right thing in order to retain loyal customers and increase satisfied word of mouth? Stay clear of Whirlpool... Theyre only out for themselves.

Purchased our Whirlpool Gold Oven in October of 2013 from Best Buy. The oven works fine, but using the oven to make pizza on March 30th of 2014, a fire started in the drawer under the oven. The oven was set at 400 degrees. Several oven mitts were stacked in the drawer. There was no major damage done to the range, other than a bit of discoloration to the white trim, but we will never put anything in the drawer under the oven and would advise others to do the same.

I have always had a whirlpool dishwasher and have always been please until my last dishwasher. The part that holds the soap and liquid stuff has broken and also the part that holds the silverware. Been really disappointed in this product.

I purchased this washer model WTW4950XW0 new. Within 6 months, it stopped spinning and was repaired under warranty. The spin actuator was defective. Great. A few months later, it stopped spinning, repaired under warranty and the spin actuator was bad. A few months later it stopped spinning, repaired under warranty, and the actuator was bad. Great. Another few months it stopped spinning again. This time, Whirlpool sent someone to repair it, another bad spin actuator. This time we had to pay for the part. So now that we are completely on our own, it stopped spinning yet again. Let me guess. The spin actuator is bad!!! Incredible. What a piece of crap. This washer was never used heavily.

This washer is less than a year old. From the start it was horrible. I was told to call a repairman who came and charged me $200 and still the thing doesnt work. I have never hated an inanimate object like I hate this machine. Oh, and the dishwasher also made by Whirlpool and also new, leaks! I will never ever ever buy anything made by this company. It should be a crime punishable by imprisonment to sell such garbage. But they keep offering me service contracts for $395 to come take a look. Thieves.

I bought the washer and dryer. I had problems right away. The glass lid has broken and replaced 4x at the hingeless. YES 4 times – 1 time under warranty. I complain, they gave me 1 extra year of a warranty. Big deal... Was told its not a recalled item because it didnt cause of fire. The dryer has caught fire 2x as the bottom fills up with lint. I messaged and sent picture and they did nothing. Said it was up to me to clean the unit. I am not able to take the dryer apart to clean it. The lint cannot be reached without removing the top and back of dryer and taking out the drum and the belt off. Nothing but grief. Giant expense to maintain all the broken parts not to mention labor fees… Very very unsatisfied. And they do not care!!!! They will never get another penny of my money!!!!! Im not sure how they get away with this!!! I spent $2000 to buy a good set that would last and all I got was junk. Not to mention the awful smell always having to bleach or cleaning it all the time.

I purchased the original Whirlpool refrigerator in August of 2013. That was replaced in October of 2013 due to a factory defect that left the ice maker unusable. In April of 2014, we now have a factory defect that has resulted in the entire unit unable to keep the fridge below 70 degrees F. It has been 2 weeks since the fridge died and Whirlpool has informed me it will be another 2 weeks until a replacement fridge will be delivered. I have spoken with countless customer service reps and 2 customer service managers, as well as 1 executive from the executive office in Michigan. Several times Whirlpool has dropped the ball in this process. The original repair appointments were booked and had to be rebooked because the repair company could not accommodate the appointment times Whirlpool booked. It took over a week to get the fridge declared dead. Then another week just to process the request through tech support... After speaking with 2 customer service managers and being told it was being rushed, I spoke with an executive who said the claim had never been submitted and it would take another 24 to 48 hours to process. I spoke with the executive after the 48 hours and he said the fridge will be delivered in 2 weeks! 4 weeks without refrigeration for a second factory defect. I have explained that I have a newborn (6 weeks old when this started) and a 2 year old, and we have had up to 9 people staying in the house (to visit with the baby) over this period and that I need a fridge to keep my breast milk cold. I was told I would receive a $75 gift card and a $125 check to help with food and costs associated with the loss of our fridge... Neither have arrived. We are spending quite a bit on ice just to be able to keep food and milk cold to temp. so we dont have to spend money on eating out (too expensive for us). I am shocked by Whirlpool’s poor customer service. The first time the fridge was replaced I dealt with one person and didnt have to call the customer service line every day. I wish I had her number still.

I love my glass top stove and glad I purchased it, so much easier to clean, I think they should all be made self-clean on any stove, I did not notice that some dont come with it and some dont. Remember not to start cleaning the top of the stove until you can touch it with your hand.

Have had it replaced. It is not a great value. Need one with freezer on the bottom. Will buy another brand. Not 2 years old making noise and it sounds like someone pounding on the side after the doors are open. This is a side by side fridge and has space but I question when this will go out.

I had a perfectly good Kenmore range, but I didnt like the color. I purchased a Whirlpool 30-inch gas range at Lowes. I had problems immediately! The repairmen were at my house 6 times within the first year. My warranty expired and they wanted me to pay for an extended warranty. I refused to pay any more for this piece of junk! I fought with Whirlpool and demanded they either replace the range or reimburse me the full cost. They finally agreed, after many heated conversations, to replace or reimburse me as long as I promised not to purchase a Whirlpool product again. What kind of company would say that? A company that knows their product is defective and has poor customer service. I opted to take the new range that they promised wouldnt have the same problems. It is having the same issues as the original one. It shuts off in the middle of cooking and it is infuriating to say the least. I can promise Whirlpool I will never purchase a product from them ever again!

Bought a French door whirlpool gold, wanted a good long lasting fridge. Bought in late 2011. After having it a couple of weeks we noticed the ice maker would take days to make ice. So we called to have it looked at. The repairman said if it is slow, switch it to fast ice. It made ice even slower, but the repair company said if it is making ice, and he comes out, we would be charged. So we lived with it. In 2014 it stopped making ice at all. We called they sent someone out and said it was a control board. They had to order it, and came back a week later to put it in. They left and said we would have ice soon. Never did!!!So we call again, they come out and said no power to ice maker. He called Whirlpool and they said wires in the freezer door were worn and broke. Well the door is non-serviceable and the cost of the door will exceed the price of the fridge! What kind of crap is that!! Long story short I will never buy another whirlpool again, and when I hear of someone buying new appliances I warn them to stay away from whirlpool!!! Run!!!

Whirpool Part #WPW10564292 refrigerator handle - I am a property manager who has 264 units. We have only been open for 1.5 years and have had to replace 30-40 door handles because they crack at the top where screws are. We tried calling Whirlpool Customer Service because obviously this is a defect and she said they looked in the system and didnt see any recall or issues. We also asked for a representative from Whirlpool to stop out so we could show them the issues and she said we have nobody in the area. We have 9 service requests outstanding that need a new refrigerator handle. On July 19th, we ordered 3 handles from our distributor and we were told theyre on back order until September 6th. When I called at the end of August to make sure we were on schedule with delivery, I was informed they are now on back order until November 5th. I just called our part rep. this morning and now they said the current part number does not exists and gave me the new part # W11026870, and they are on back order until mid or end of November. I am not going to keep quiet about this issue. We have paid $79.89 per handle on a refrigerator that is only a 1 to 2 years old appliance. I am requesting a returned call or email on what you are going to be able to do for us. This is not right or fair to a company that spent a large amount of money to have your appliances in 264 units.

The refrigerator is about 2 years old. Has worked great. Stainless steel finish looks great. Was a good price at Lowes, with free delivery and removal of old refrigerator. I bought a simple model. Did not need a water connection.

I bought a glass top stove model number W10221843A. My son dropped a plastic cup on the top of the stove. It put a hole and shattered it. Now remind you, it was plastic. I barely use this side of the stove, so not like it was weak. I paid a lot of money for this product just for a plastic cup to destroy it. Is there any recall on this stove? Any help will be appreciated. Thank you.