I bought a Whirlpool Cabrio 2 years ago and until last week it was fine. We got an error message that said we had to call for service so we called a local whirlpool repairman. The repair guy told us it was the control panel and it was going to cost between $400 to $500. He also said that he works on a lot of whirlpool washers and this is the first time he saw a machines control panel fail. He recommended that we call Whirlpool.I called Whirlpool customer service and after waiting on the phone for 40 minutes I was quickly transferred to customer resolution and was told that since I hadnt purchased the extended warranty there was nothing that they could do for me. I kept asking her, There is nothing that you can do to help me? And the consistent answer was no. I will never buy another Whirlpool appliance. This has been so frustrating to have an appliance that looks brand new and wont work. The manufacturer wont even try to help with fixing the problem. Amazing AWFUL CUSTOMER SERVICE.

Purchased a Whirlpool double door refrigerator and within a year the freezer and refrigerator doors were severely out of line. Called repairman who said the risers were broken, they were plastic and needed to be replaced. We did that. The doors were again out of line so badly that you had to push the refrigerator door side hard to get it to close. Repairman came today and stated he would recommend ditching the refrigerator as the risers in the bottom of the refrigerator are made of plastic and will continue to break. He leveled the doors but stated that they will continue to become out of line again.The repairman stated that this is a design defect in the Whirlpool refrigerator and he has replaced the risers in many of the refrigerators repeatedly. As if the refrigerator isnt enough, we own a Whirlpool Duet Washer and Dryer. Within 3 1/2 yrs the motherboard went bad in the washer and we had to replace it. The part and labor was almost $400. Whirlpool considered us a valued customer and offered us a comparable washer for $500 and they would take ours away for $20 extra. Only problem is that our original washer was $1,000 and the comparable was not as large as the one we had and did not have the stainless ours had.All I can say is if were valued customers I would wonder how they treat their less valued customers. All of this is to say that I will no longer purchase any Whirlpool products. Not only are the products below par but the customer service is non existent. They really do not care if they lose customers or not. They dont want to hear your woes about their appliances.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

Another reviewer complained about a knocking sound upon startup. My Brand New fridge has been doing that and I have just ignored it. Maybe I shouldnt. Compared to our original Beaumark fridge, the Whirlpool is VERY NOISY.. Since the actual workings seem fine, I am not complaining but rather quite concerned.Especially after reading the numerous Negative Reviews.

Our over-the-range Whirlpool Microwave (Convection-Type) died 17 DAYS after one-year-warranty expired BUT theyre sending a local repair outlet out to fix it. I am very surprised... Thought Id be stuck with a $700 boat anchor. Thank you Whirlpool for standing-by your product. BTW... My research indicates these microwaves die quickly if you use the convection option very often... So now we know better.

Purchased a Whirlpool range. Shopped around for several weeks before I found what I thought was a good price and with a rebate! Ive owned the stove for 2 months and 7 days... guess what? The stove broke. The burners popped. I called to have it serviced and remember that it had a rebate. I never received any paperwork on the rebate but figured its Whirlpool, good company. Wrong... its not that I didnt have the rebate paperwork but the rebate has expired... even though I didnt get any paperwork nor was there any mentioned of a time frame. Dont get me wrong if it had been 1 year or even 6 months... really 2 months!!! So not only did I not get the rebate of $100.00 I have a broken stove! So tired of being ripped off!

I waited years to buy this machine. I hate it!!! I agree with the other bad reviews. It destroys clothes. There is barely enough water in it to cover the bottom of the machine much less the laundry. Even deep water is a joke. It does not clean. I put it on the hottest water temp and I can put my hand in there and it is barely warm (it is not my hot water heater). My lightweight comforters come out all tacky and grungy in the middle. The softener dispenser (I use vinegar) dumps in the laundry (no it is not over full) (no I do not slam it shut). I can not let anything soak because the machine will drain after a few minutes and all my detergent, scent crystals etc. are all wasted. I feel like I have to take a survey and complete a questionnaire every time I do laundry. Can someone tell me how to put a comforter in there and leave that little middle eye open? They say the water saver is government regulated? Yup I need the government to do my laundry... I believe in saving water. I have a water saver toilet, shower, faucets. However I can not clean dirty jeans in a gallon of water. My clothes do not even get wet. How does whirlpool get away with advertising this machine can do king size comforter? The gentle cycle will tear apart anything I might put in there because there is no water and that blooming thing just twist and turns so it tears anything delicate. This is the 21st century. I think I should not have to babysit my washing machine. Why should I have to readjust everything in hopes it might be almost clean??? Place this here and that there, wipe the lint out before doing dark laundry. This machine belongs in the dark ages. It is so complicated yet it achieves nothing. A big rip off. I so tired of crying over this purchase. I hate this machine!!!

I had a Whirlpool Natural Gas Water Heater professionally installed on 2-27-2107. This unit came with a Honeywell controller and thermopile assembly. Today is 05-18-2019 and the unit is not inoperative. The pilot is lit but the burner wont light. Here are the issues that I have come across so far: When I go to the Whirlpool site there is no direct link to Whirlpool water heaters, just kitchen appliances and washer/dryers. When I click on parts and accessories link it gives links to washers, dryers or pedestals. Again... No information about water heaters. I scroll down to the bottom of this page and I see a link to All Replacement Parts When I click that it takes me to another site managed by RepairClinic. When I enter the model number for the water heater it says Not Found. I entered the part number for the thermopile on the tag on the orange wire #321165-002 and 100078039 and again it returns as Part Not Found.Its obvious that Whirlpool is putting little effort into supporting their water heaters or their customers. I called their support line and they were able to order the thermopile assembly for $55 plus $27.95 in shipping to get it here by Tuesday. Today is Saturday. So that means almost 4 days without hot water. And since this water heater was a warranty replacement for a previous one that went bad they will not cover the cost of replacement parts for the thermopile. Lesson learned: No more Whirlpool purchases for any of their appliances.

I am extremely disappointed in my new Whirlpool washer dryer matched set. My washer started to leak at less than 6 months of age, and my clothes are extremely wrinkled due to excessive spin and smell absolutely foul. I have adjusted the spin cycle to the lowest setting to prevent wrinkling as suggested in the product materials. I have cleaned the washer with the recommended product on the clean washer setting, although now with the leak, that means a good floor mopping too!I have contacted customer service about the leak since the machine is still under warranty - and they gave me a 4-hour window on a specified day for the service. I took the time off work and the technician failed to show. I called twice to follow up on his whereabouts and ETA. They did nothing except tell me to keep waiting. 45 minutes after the outside hour of arrival had passed, I called again. The customer service offered to make me another appointment so I could take another half day off work and hope he would show up the next time. When I asked for a preferential booking (with a real time) to minimize taking more time off work, the manager said all she could do was give me another 4-hour window. I said that was really bad service and she hung up on me! Another rep did do a little better - he sent me a name and number and said I could try to book an appointment directly and hopefully minimize the additional time off. Its the last Whirlpool appliance Ill buy - with that kind of customer service, Id rather be out pounding my laundry on a rock.

Bought this Whirlpool Cabrio washing machine 4 years ago not knowing it was a low level water washing machine. A man would have had to design this piece of crap. Not only does it not clean the clothes because the agitation on it is as slow as sloth. On top of that the clothes tie themselves in a knot when finished. If you don’t want the frustration of clothes washing, I would highly recommend you not buy this type, if you enjoy cussing then this machine is for you.

I have had my Whirlpool electric oven for so many years that I don’t even remember when I purchased it. I also have a Whirlpool stove top & the same with it. Zero trouble for many years. I highly recommend Whirlpool range tops & ovens.

Cabrio top loading washer - I have had this set for 3 years. The first 8 months it was fine, then came all the rust. I had to go to the BBB and file a complaint as everyone at Whirlpool would not help. Last year they finally replaced the top, and now, its rust yet again. I rinse and dry the machine when I am done using it. The repair man said it was because manufacturers are not using primer and just one coat of cheap paint. What now? Ill see if I can get the lid off and sand it and use rust preventer on it. Never again, I should just junk this piece of crap and Whirlpool should shut down if they cant make anything worth our hard earned money.

This dishwasher is noisy, it does not get the dishes clean, and anything that is remotely lightweight gets thrown all over. This must be one of Whirlpools cheapest models as I have had other Whirlpool products and they were fine.

I purchased a Whirlpool Gold refrigerator in May 2012 and about 8 months ago, ice started to form in the freezer. The ice melts and water drains out, so when you come in the kitchen all of the sudden you step in a puddle of water. I called CS and they told me the best they could do was authorize part(s) and the labor and service call would be my responsibility. Everyone knows service cost way more than parts.

I purchased a Whirlpool refrigerator in 2014. It is a side by side with ice maker in the door. About 8 month ago the ice machine stopped working. I called an appliance repair center and they diagnosed the problem as being the control board for the ice machine. After only 3 years this stopped working? I gave them to OK to fix it. A few days later I was informed that the part is on backorder for a few months. Well a few months has become 6 months and no part is available. I contacted Whirlpool and they called me and promised a solution, but then they never contacted me again. So it is almost 7 months later and I still have no ice. How can a relatively newer product break down and then not have a part available? Whirlpool absolutely does NOT care about their customers and does NOT back their products. Stay away at all costs.

Steam cleaning DOES NOT work! I have complained to Home Depot and Whirlpool since my purchase 9/2018. They sent 2 different repair men and both times I was told there was nothing they can do. I got one phone call from Whirlpool (Maytag) and they sent me a cleaner (wish is just for the stovetop). No other return emails or calls have been acknowledged. My stove looks like it hasnt been cleaned EVER! I was also told to use elbow grease. I am so disgusted and at my wits end. Any suggestions, besides court?

Model WTW4850OXQO. Purchased this washer in Nov. 2011. Two months ago the washer began making a loud grinding noise in the wash cycle, so loud it can be heard throughout the house. Called the dealer whose serviceman said it was the gearbox and it would need to be replaced. Cost of the gearbox $235.00 plus $165.00 service. Called Whirlpool in TN and was told that I didnt purchase their 1 yr warranty. What the hell is a 1 year warranty but me paying Whirlpool to fix their defective piece of crap in case it breaks in the 1st year. I owned a Kenmore that lasted 11 years, an RCA that lasted 12 years, and a Maytag that lasted 10 years. Never a problem til they died of old age. This piece of ** is breaking down after 3 1/2 years. NEVER buy Whirlpool! Also, the inside of the machine SMELLS. My wife has to use bleach or cleanser to get the smell out. Once again a company in the USA thats too big to care about its customers!

We purchased a new Cabrio top loading washer in June of 2011 to replace a Maytag Neptune (thinking at the time that wed gone as low as possible). We didnt abuse the machine. In fact, because it had a tempered glass lid (in a plastic frame), we were careful with the lid on the machine. It broke during a wash cycle. Because its heavy, the lid has spring supports on both sides; these are stronger than the plastic frame and over time the frame will break, rendering the machine inoperable. The discounted price for a new lid is over $200, and Maytag (I mean Whirlpool) tells us that it lasted through the 365 day warranty, so the bill is on us. It may be green when it works, but taking 18 month appliances to the landfill is not very green. And others on the web report say that the lid only lasts a year or so. The ratings scale needs to have negative values. Id give this appliance a -5.

Bought a Whirlpool refrigerator from Lowes 5 months ago. Already had a repairman out two times. The refrigerator is defrosting out on the floor. We are constantly having to change towels to catch the water. The last repairman said it could be fixed and started the procedure to get an exchange since it was still under warranty, but now Whirlpool is saying they still want to fix it even after we were told we were getting an exchange. These people are crooks and put out low quality merchandise, then dont back it up. I have seen complaint after complaint on the reviews. Whirlpool needs to be put out of business.

We have had our range for over one year. The main problem is that the large burners are in the front and the small burners are in the back. This means that when we are using the two front burners we cannot access the rear burners safely. (What country provided the engineering design for this?) One minor problem is that we cannot get used to the burner control arrangement. The outside controls control the front burners and the inside controls control the back burners. Our old range was the right control for the back burner and the left was for the front burner. Another small problem is that there is no back to the pan drawer. So, with the drawer full if a pan move when the drawer is shut it will be scraped off the drawer and fall into the back and becomes hard to reach to remove.

I HATE, HATE, HATE the aqua lift clean feature. Its awful. The bottom came somewhat clean but cook bacon and the sides and top are filthy and the aqua lift cant clean that. I dont know how this ever made it past the thought process stage to become a thing but it needs to go away. Im quite cranky right now as Ive just spent two hours scrubbing my oven while reaching past the oven door that doesnt come off because its a self-clean oven. This is what I have to look forward to for the next 10 years until it dies and I can get a new oven? What a joke!!

Very similar experience with warranty issues as everyone else. I purchased a brand new $2k side by side stainless steel model in Dec of 2013. It began not cooling in August of 2014 and they have since had 8 repairs and still will not exchange the fridge/replace the fridge. We finally had to buy another fridge and put it in our garage in order to have food in our home (of 5 kids and 2 adults). Ridiculous customer service every phone call. Possibly the least educated, rudest individuals always. Never buy from Whirlpool - worst reputation ever.

I bought a house 2 years ago that came equipped with all new Whirlpool kitchen appliances (refrigerator/freezer, stove top and dishwasher). A few months ago, the damper door in our refrigerator broke causing food in the refrigerator to freeze. Just the other day my Whirlpool dishwasher stopped draining properly. Both instances a repairman was needed and were now out over $400 for repairs and parts. I would definitely not recommend purchasing any Whirlpool appliances and I am deeply frustrated that Im having to deal with these repairs and costs for appliances less than 2 years old.

Got a fridge Friday night setup, and was not cooling as of Sunday still. Called Best Buy who we got it through and they sent someone out first thing Monday AM to look at it. Per the Whirlpool agreement, the first year has to get serviced through them. Finally got a hold of their service support to get someone scheduled to come on site. 11 days later was the earliest appointment, and they just expected me to deal with no refrigerator for 11 days. I asked of other options, what wait times would be after Whirlpool comes out in 11 days to deem it broken and they repeatedly said I cant give you any what if answers for anything. Were no help at all and just expected me to figure out things for at least 11 days on a brand new 3 day old machine that is broken. The absolute WORST customer experience ever and refuse to buy from them again. Thankfully, Best Buy has a return window so were completely returning it and going with a different brand.

I bought my Whirlpool Cabrio (washer and dryer) in August 2007 ($1800 for the pair). I love these machines. I have only had one problem with it (I had to have a valve replaced - about $380, the machine made a screeching noise when it filled with water). Otherwise, I have never experienced any of the problems listed above. I bought this machine because I was pregnant and chose to do cloth diapers. I was doing nearly 20 loads a week at one point. Now, I do about 4 loads a week (would be about 8 loads in a normal machine). I love that the tub is HUGE and I can fit 2 sets of double sheets plus towels in one load. My clothes always come out clean and near dry.I wash everything in it - even dry clean only using the hand wash cycle. Prior to this purchase, my clothes were not clean. I could still smell deodorant in all my t-shirts and blouses. Not any more. Its the best purchase I ever made. Although, Ive always wondered why you have to clean a washing machine monthly when... well, its cleaning clothes anyway.

Whirlpool is not what it was before. I got this set with new house... They are very poor construction. They are not even close what I have before the LG. After 6 months I begin to have problems with the dryer... Technician come two time to fix the problems. Quality of washing is OK though... That going to be the last time I got Whirlpool products. For sure.

Purchased this fridge just over a year ago WRF555sdfz for over 2K. The stainless steel is starting to come OFF. Advertised as stainless Steel. Must be fake! Called customer service. I was told they could do NOTHING because it was a cosmetic issue. Remodeled our entire new kitchen. Thank god other stainless steel appliance are made by other manufacturers with no “COSMETIC” ISSUES. Will never buy another Whirlpool product and I will tell everyone I know.

I bought a new house 2.5 years ago with all new whirlpool appliances. This week Im told the washer transmission is defective. Unbelievable! I only wash 4 average loads per week. This is a problem I would expect in 8-10 years. I am going to replace the unit with another brand.

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

Whirlpool stove, product ID WFG540HOES. I purchased a whirlpool gas stove in 2014 for a lake house. Came to my lake house to find the temperature was 90 degrees inside and the oven was running full blast. The oven had turned itself on. Whirlpool appears to be having a problem with this type of issue. Called their customer care department and was transferred to the appliance safety line which was only a line to leave a voicemail. Very bad customer service. My kitchen countertops and kitchen floor will need to be replaced, also cannot get rid of the burnt smell in my house. Do not recommend purchasing Whirlpool appliances.

Our new home came with brand new appliances. I love our Whirlpool microwave. Its reliable, quick & has lots of great pre-programmed features to assist with regular. The independent timer is a total bonus too.

My Whirlpool dishwasher washes dishes well, when it drain but it will not drain. I purchased insurance repair service from AIG. AIG is a total rip off. I paid them over $300. I have called many many times. They promise someone will call but not one ever has. I would never work with AIG or Whirlpool ever again.

Don’t ever buy Whirlpool smaller (apartment) size front loader washer and dryer - from Home Depot or anywhere else. Beware of rules in warranty plans. I am very dissatisfied with them. I have had several service calls.

Purchased a Whirlpool Cabrio washer with the glass lid. This is not a good washer to buy! The clothes do not get clean. Have to set it to bulk to get enough water to even cover clothes. Biggest issue is the lid. I have had to order a new one as it cracked on both sides back by control panel. I took the old lid off and discovered why the lid cracked. I have read many complaints about this same issue and everyone said Whirlpool would do nothing about it or even acknowledge there was a problem.Here is the problem. On each side there is a spring to hold the lid up while in the open position. The lid is plastic. When I tried to push those lid pins down with the lid off they would not go down. The springs are too strong for the plastic. When the lid is down the springs are trying to hold the lid up, so they are pushing against the plastic. Given time the springs win out against the plastic and the lid cracks and breaks. I am just a simple housewife and I figured this out! I hope that every manufacturer that is making glass top lids STOPS making them out of plastic, uses metal instead, uses a spring that is not as strong, or foregoes the current design and comes up with something that is better. It is for certain that I will never buy another Whirlpool appliance!

I purchased my Whirlpool Duet in 2007. I have since paid more than what the washer costs in repairs. Now, the metal that braces the basket has corroded and fallen apart. Ive read that this has happened to many people and since then the company has changed the part. However, they are unwilling to send a new part to me. I will never buy a whirlpool appliance again.

Whirlpool Cabrio top loader washer - I am writing to really complain about a washer I bought there at Metro. The people were great BUT this washer has been a REAL DISAPPOINTMENT!!! It is only 4 years old and I have had to have them come and replace the top of the machine. It has rusted around where you put the bleach, the soap. It leaks underneath the machine, its rusting on the bottom of the machine horribly. SO DISAPPOINTED!!! We bought all WHIRLPOOL products - washer and dryer, stove, microwave, dishwasher.What is it with these things? They rust so easy. I had a washer before this one for 14 years and it never did this. I guess things are not made with the same quality as years ago, but I will not ever spend my hard earned money on WHIRLPOOL AGAIN!!! I guess I will have to put up with this machine till I can afford to buy something else. VERY DISAPPOINTED CUSTOMER!!!

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.

I have been having a problem when washing my jeans in the Whirlpool Cabrio that I have never had before with my old washer. When I wash my jeans, there are always a few pair, never the same ones, that have an odor like dirty dishrags on them. I always hang my jeans to dry so I do not think it is this. I have tried to add a freshener to the wash cycle, it does not work. I have tried to dry them in the dryer with a scented dryer sheet, it does not work. I am assuming after reading these past complaints from other consumers that it is not getting all of the clothes clean because of the lack of water. I always use the deep water cycle, but maybe it is not enough water as previously suggested. I have had an issue with blankets and other heavy items not getting clean and/or not even wet. Thoroughly disgusted with this appliance!! I love all of my Whirlpool kitchen appliances though!

Stainless steel fingerprints and rusting are terrible. The storage doors in the freezer have an open bottom which allows items to slip out which is annoying. The fridge has ample space for all my items without being overly huge for no reason. Great for 1-3 people. The rest is perfectly fine.

Rust around the inside of the top of the washer. They do not use stainless for this part of the washer. It is some sort of cheap tin material that will rust in less than the first year. They have gone cheap on building but still think their products are worth the expensive price they ask. Do yourself a favor, pop the lid and look under what they do best to hide and also they removed the pop down door on the dryers so you cannot vacuum out the excess lint build up. Tragic lint gets hot and starts to burn in the gas models and stink. They should be ashamed of themselves. They have bought up most of their competition and now they have gone cheap on product production but not on price.

Our first Whirlpool washer barely lasted 1 1/2 years. They replaced it with another one that broke within 9 months. When it worked, it was great... When it didnt, it either overflowed or did not wring clothes tightly on the second rinse.

I bought this Cabrio Washing Machine just over a year ago and it never drained water when I was doing towels and bed sheets. Life got in the way, and I managed to run smaller loads in the regular settings. Now, the machine is just over a year old and it will not spin unless I put it on the rinse and spin issue. It takes well over 2 hours to wash a load of laundry. From looking at other reviews, this is a big problem. I would not recommend this washer to anyone. It cost a ton of money and was the worst washing machine I have ever used.

Aqua clean does not work. I purchased this range this year not knowing aqua clean was different than a standard self cleaning. I had not use the range since its delivery in June until Thanksgiving. One meal in the oven and the turkey had created staining on the sides and the bottom. I have run the self clean cycle so far four times and scrubbed till I’m blue in the face. The greasy stuff does not lift off and the warranty voids if you use anything else. Have already contacted the dealer to see if I can return this!

I bought a brand new Whirlpool fridge 3 years ago and it went out completely while on vacation. I lost 5 black bags of food. The compressor went bad due to it leaking Freon or whatever it is called. This is a recall on most models but they say not on my model so nothing is being done. So I will never buy another thing made by Whirlpool again.

I bought a Duet front load washer and dryer set in January 2009 from our local Lowes. Spin cycle noise progressively got louder over time to the point we contacted our locally owned service company to check it out in June 2011. Cause is defective shell and spin tub, total repair cost $750. This was about the original cost of the washer! I contacted Whirlpool via e-mail (wait time via their phone is outrageous), they wont do anything. Out of warranty. Up until now, Whirlpool has had a good name with me. Not anymore. I will never buy anything Whirlpool manufactured ever again. (Maytag, Kenmore, maybe more brands.)American companys insensitivity such as this is what gives some of American industry a bad name and drives consumers away to quality foreign brands made in Europe: German, Swiss, Italian, Swedish,etc.Im going to take a hard look at Bosch washers to replace this Whirlpool piece of junk.

I purchased a washer from Whirlpool through Home Depot on August 7, 2014 and on Dec 31st, 2014 the washer broke. I called Home Depot and was told to call Whirlpool since I was still under a year warranty. After numerous calls I was referred to Advantage |Appliances, a company that provides repair services for Whirlpool. After a week the technician showed up and briefly inspects the machine to conclude that there were two problems with the machine: The controller is defective and there might be another problem since the water is not draining. An order was placed for the part and another week went by with still no part. I called the corporate office only to hear that it might take 5 to 7 days to receive it. In the meantime I had laundry piling up. I was forced to go to the laundromat with one arm in a cast and a painful lower back. I finally received the part on Friday and the technician arrived on Saturday to install the part and then announces that she was willing to fix the water pump but had to get paid in cash since this was not included in the warranty. Now mind you! This woman knew about the problem from her last visit but made believe that it wasnt a problem. Advantage Appliance makes money by extorting their customers out of money. This young lady stood there without blinking asking me to pay her $89.50 to do the job she was suppose to do in the first place. I purchased an extended warranty from Home Depot only to find out that they would not be able to do anything since I was still under warranty. I have never been so angry and want Whirlpool to take responsibility. I am sitting with a washer half full with water and no one is stepping up to do something! Whirlpool is disgusting! The corporate office was not friendly or nice about this situation. They dont care! Why do businesses like Whirlpool get away with this? This is not acceptable.

I have had this front loader for 5 or 6 years. My clothes absolutely stick, I cant stand the smell of them. I have used Affresh, the recommended cleaner 3 days in a row, multiple cycles, no improvement. I did the vinegar treatment, leave the door open etc. What is upsetting is I have read Whirlpool has been aware of the mold and mildew problems of front loaders yet continue to manufacture them. The gasket in the front enclosure pockets at least a cup of water and other gunk from the wash. A waste of money!!!

Purchased from Home Depot and self-installed. That part was not too big a deal but after installing this stove we started a journey of irritation, aggravation and general dissatisfaction. This stove has the standard layout for burners that seem to be common to most low-end stoves. Two huge burners in the front, a simmer burner at the right rear and a general purpose burner at the left rear. Thats all wrong for me and our set up. I want a large burner at the left rear and general purpose every place else. Can you alter the standard configuration? NO! Not without some major alterations to the stove top.Next are the grills or cast cooktops (2 each). They are a bit cumbersome when cleaning the stove but doable. The real problem with the grills are Whirlpool decided to save money by skimping on this feature. The grills are not a stable cooking platform for smaller pans and it turns out Whirlpool recommends square pans for this stove. SAY WHAT? I have pans and skillets from my grandparents and they are ALL round. Thats how that stuff is made. ROUND! The grills design is unstable for any round pot, pan or skillet, if its diameter, is 6 or less. Kiss that excellent saucepan goodbye if you have this stove. My current solution is a piece of light expanded steel over the burner areas.Keeping in mind we use Propane as our heating gas. The adjustment of the flame temp on the four burners is non-existent. They all are either on high, medium or low. There seems to be no fine tuning with these burners. At the end of the day go look for something that is NOT a Whirlpool, LP gas range Model #: WFG515S0EW. You will be better served and less irritable with almost anything else. Even a campfire in the yard is a better choice.

The oven has not worked correctly from day one. I have to use a thermometer plus after the correct temp is indicated I still have to wait another 15 minutes for the oven to reach the desired temp. Also have to set the temp for 25 degrees higher than the one I want. The burner that supposedly has two sizes in one is basically useless. Temps are not correct and sizes are misleading. There is a tiny groove around the outside edge of the stove top that gathers crumbs which are hard to clean out.

Without being too critical, I would not recommend this washer for medium to large loads or for throw blankets. I have to wash throw blankets 2 to 3 times to get the entire blanket wet even on deep water cycle. I would not buy this washer again.

I purchased by first Whirlpool Cabrio washer in 2007 with an extended warranty (my husband did not want me to buy). Thank goodness I did. The machine had repeated issues to the point that the service repairman and I were on first name basis. Finally, the mother board went out. The rust on the sides was excessive and of course my expensive sheets and towels were being shredded. Lowe’s extended warranty plan did honor this and replaced my machine with a new Cabrio washer (big mistake!). The new machine; receipt for this was over $1,600.00, including the new extended warranty that ends in 2014, was bought on 3-25-09. It now requires a new drum and bearings which are being replaced today (9-19-12); however, the corrosion is just as bad and my clothes are still being shredded. Oh, also the lid no longer locks and to get the machine to actually run. I have to physically hold down the lid until the lid locks. The repairman said that there is nothing he can do as the company will not repair this or replace the machine again under warranty! The joints where the lid attaches have rusted through and that is why the lid cant lock. The whole lid needs to be replaced and the company says it would cost about the same as a new machine about $690.00. What a rip-off this company is for the consumer! I will never, ever deal with Whirlpool again and I mean never, ever again! (sans Taylor Swift)!

I purchased my stove in June 2020. I had no idea it was to be connected to the internet, but no big deal. Had I known of all the other quirks I would have thought twice. 1: A red light comes on to tell you a burner is on but not which one. 2: A red light appears when a burner is hot but it doesnt show which one. 3: Only 3 burners out of 5 can be used for cooking the other 2 are warming and melting ONLY. 4: The stove updates its software whenever it feels like it and shuts off the oven and burners. 5: Periodically I have the oven on and it just turns itself off!6: The touch controls for the oven are in a bad spot because if you accidentally touch them when the oven is on the oven will shut off.Not sure if it has any serious problems just the inconveniences listed.

May 4 I ordered a washer and it was to be delivered on the 21st and on the 20th a salesperson calls me to say my ordered washer is out of stock and she gives me a substitution washer that wont ship to me until june 20th a month away even though I already had been waiting a month, I was very upset and said, I wont accept it but let me think about it, I thought there must not be anything sooner (BIG MISTAKE). So I called back and accepted but after getting off the phone looked online and found a washer that would be delivered on May 28th and it was just delivered no problem but now no one at WHIRLPOOL can find the subbed order to cancel and give me my refund from the out of stock washer... So I have paid for 2 washers and every time I try to get help I have an hour wait to get a person. I am a 65 yr old woman who has been put thru so much stress and it is not good for my health. All I want to do is cry.

I bought a Whirlpool water heater not even 3 years ago, and I am already replacing parts; thermostat,thermocouple, and as of yet, no fix. We contacted Whirlpool, and they said that everything has been tried, and if the thermocouple doesnt fix it, well have to hire a plumber at our expense. Its kinda ridiculous. The water heater that we replaced, had been in the home for almost 17 years.This one didnt even make it to 4.

My 2 year old refrigerator died. I called Whirlpool and their customer service is horrible. Finally after weeks was able to purchase another refrigerator from them directly at a discounted price and they sent the wrong one. I kept it because I could no longer live without a refrigerator. Horrible company, terrible customer service and even worse product.

I bought the Cabrio Platinum Set approximately 3 yrs ago. These is the worst products I have bought ever. The dryer didnt dry properly since day 1 w/the energy saver setting. I have always had to run a time dry in order to get properly dried clothing. Sometimes things still come out damp. The washer well the washer as I said the WORST product EVER. Approximately 3 yrs old and it leaks all over my laundry room unless surrounded by towels to suck up the water. During the wash it has the worst smell ever. And while spinning it jumps around and is so loud, you can hear it all through my 3 story home. We have complained we have written, emailed, called and have been offered nothing. I can honestly say I will NEVER buy another Whirlpool product again ever.The least they could do is stand by their product. For the price of this set it should have lasted much much longer. I had a Kenmore washer and dryer set that we bought it was not even top of the line I would say probably a cheaper model of theirs that lasted 10+ yrs we bought it brand new and my friend bought it when I changed to a front loader which by the way was one of the cheaper ones but was still better than this piece of **. It started breaking about 1 yr after we bought it. We have already fixed a few things but will not spend another dime on it. Now its not even cleaning. I now have to buy yet another washer. From what I have read either Whirlpool needs to up their game or just go out of business.

I bought a model (W10632082 A) dishwasher, and the top shelf is very flimsy, the dishes and glasses do not get clean, even after I fully removing any food soil from them. The dryer does not work. The dishes come out wet and with water spots. It is very noisy, and the water cycles are programmed to run upwards to three hours!!! The basket for the silverware is designed to be hung on the door, this basket falls off easy, and you cant use the left side because the normal size of the spoons or forks, get in the way of the dish washing soap reservoir, making it difficult to close the door. Do not buy this product. Horrible!!!

I would not give this any stars! I purchased a Whirlpool gas range (model #WFG371LVB1) just 2 years ago at Lowe’s. The oven heats up to 475 no matter what temperature it is set at. The Whirlpool authorized service agent said it needed a control board which would cost $650 to install. The repair company found one for less--only $300. After reading all of the other complaints about these ranges, weve decided not to repair it and will probably have to replace it soon. We have been Whirlpool customers for years and will not purchase another Whirlpool product. There should be a recall on any of their products that have these continual problems. The oven cannot be safely used for normal baking.

I absolutely hate this expensive piece of junk. I have tried everything, and my clothes are not clean. It is only myself, and my husband, and our clothes dont get very dirty. I would like to send this junk to the junkyard, but I spent a lot to get the dryer with steam that went with the washer. This experience has soured me on Whirlpool appliances, and now I learn they also make appliances for Maytag!

Whirlpool 29 cu ft French Door Refrigerator WRF989SDAM - We purchased this refrigerator September 2013 for our new home. We moved in November 18, 2013. The refrigerator made a very loud buzzing/humming noise from the beginning and did not make enough ice. The shop we bought it from came on 2 occasions to work on the ice maker and finally totally replaced it. Then the rack on the bottom of the left door fell out and contained glass jars of pickled vegetables. They broke and made a big mess and etched our travertine tile floor. We called the shop and they sent their son out who put the rack in with duct tape which of course did not work so we took it out and put it in the cabinet. We had to pay to have the tile polished to remove the etching. On the weekend of November 15, 2014 the humming noise was so loud that we called the repair person again and they came out on November 17, 2014. At first they thought it was a fan motor but the freezer started making a loud noise and the owner came and said the compressor was going out. Our food was beginning to thaw and we asked if they could at least loan us a refrigerator to use. They brought us an old small fridge which was put in the garage. We took all our food out there. They came November 25 and picked up the fridge to be repaired. We had been told the warranty was out but after calling your company they were told Whirlpool would cover parts and labor. Today is Thanksgiving Day and we can not cook a big meal due to the small fridge and freezer and we are buying bags of ice every day. We have family visiting and must go out for dinner. We have no idea of when our refrigerator will be returned to us. This has been an expensive and disappointing experience. I would never recommend your refrigerator to anyone due to this experience. I really feel we should have been offered a new refrigerator at a discount. We bought all our appliances from Dons Appliances in Okeechobee, FL 34974 and they are all Whirlpool. This refrigerator cost $2299 and our total order was $9,642.84. We would appreciate a response from your company.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

We bought a new side-by-side refrigerator (GSF26C5EXB00 26cf) with water and ice in the door. We have had to replace the built-in water filter every two months at $30+ per filter. This is unacceptable. We just want to know what to do to fix this problem. There is only one person who uses the ice maker, and no one uses the water in the door.

August 26th 2014 purchased a NG (NO GOOD actually natural gas) Whirlpool water heater from Lowes. Model No. N40561-403. Installed it and everything was fine until this morning August 29th 2014. The indicator light was out and so was the pilot. Tried to light it without success. Called Whirlpool and they are sending me a new controller that now needs to be installed. Called Lowes and they will not take it back. Wish I would have found this site prior to this costly fiasco. Waiting on part now and I will keep you informed as to my progress. I have a feeling this is going to be 2 days wasted and $367.00.

My dishwasher was only 18 months old when the rack adjuster broke causing the top rack to collapse. I researched and was able to order the replacement part which now comes only in metal. (The original Whirlpool piece was cheap plastic.) I spent $40 for the new part and spent several hours installing it without any help from Whirlpool. Then when I tried to use my dishwasher it wouldn’t run. Repair person came out and diagnosed it with a pump assembly failure. Part alone was $222 and it was on back order. Extremely disappointed. I have tried to contact Whirlpool to see if they would at least offer me a discount on the part. Their customer service number is never available. On hold for so long I finally gave up. Maybe I just got a lemon but I will not go with any Whirlpool product again.

After a days work Old Grumpy around 7:00 PM drags to sink, fills pan with hot water & soap; starts scrubbing forks, spoons & occasional cereal bowl. I prewash everything placing it in the dishwasher, it takes it a week to reach 3/4 full: use for sanitation.

We bought a WRS325FDAM02 Side by Side Whirlpool Refrigerator and from day 1 we have been having problems with rust buildup on both doors. Bought it in July 2014 and have had the service people over to figure out the problem many times. They finally decided to replace the doors which didnt help because the replacement doors are doing the same thing. We have bought everything they told us to buy to clean and try and prevent the rust from coming back but nothing helps. Our warranty was ready to expire so we bought the extended warranty only to find out that cosmetic issues are not covered under the extended warranty plan... Stay away from this model refrigerator... Not only that we were then told the doors are not really Stainless Steel just some fake crap that looks like Stainless Steel. We paid good money for this refrigerator and have to deal with cleaning rust off the doors day after day.

We bought a Whirlpool Cabrio 6300 washer based off the salesmans recommendation (not very happy about this). After the warranty ran out, every time in the spin cycle, it makes a sound similar to a piece of metal banging around inside the cylinder during the cycle. Our friends have told us they had a similar experience and for their machine, they found out the bearings were going out. Weve had this machine a total of 3 years. I doubt we ever buy another item from HH Gregg plus will do our investigation on Consumer Buyers digest before we toss any more money out for a washing machine.

My whirlpool refrigerator relay switch caught on fire and customer service told me that my model wasnt on their list of problems refrigerators, but they know there are a lot of units out with the chance that it could start a fire if anyone has a whirlpool product refrigerator. I would call 1-888-923-8502 and check to see if it is on there list to replace the switch.

I bought my washer duet (model WFW94HEXL2) in Sept. 2011. Today is Jan. 2013 and it has been a year and four months since I got the washer. I decided not to buy an extended warranty. Its only my husband and I at the house so we take really good care of our appliances. The washer stopped working and is giving me a code F-6/E3/E1. Basically, I need to change the central control unit ($350), door latch ($120) and labor ($180), for a total of $656.13. Really? I paid $1,105.00 for the washer. Im really upset. I called Whirlpool and they said the item is out the warranty and there is nothing they can do. I am really upset.

Within 5 months my 850$ dishwasher broke. 2 months to repair and 15 plus hours on the phone. Warranty is cryptic. You must allow them 30 business days from when they order parts. Buy Bosch, wish I did!

Whirlpool Gas Water heater purchased from Lowes in 2012. Have replaced two thermal couples and three gas control valves. Will not stay lit! Problems began within six months of purchase. Third gas control valve quit functioning today and Im on my way to Home Depot to purchase a Rheem...Im done with Whirlpool!

The worst washing machine ever. First off you cannot turn the water on to let it fill and add clothes as its filling. Secondly the Normal setting will not allow you to spin on low, your choice is high or no spin. High tangles your pants, slacks, shirts, etc. No spin leaves them soaking wet. Also its a water safer but never, never, never covers the clothes in water, and sometimes they dont come out smelling so clean. I dont save water if I have to rewash two or three times. Absolutely hate this washing machine. When I get enough money I am going back to the old agitator model and not any Whirlpool either. Oh and the other thing, you cant just throw you clothes in the washer, you must arrange then to the outside of the center itty bitty agitator. Hate it.

I have a refrigerator model WRT359SFYM00 that is 4 months old. It suddenly just stopped getting cold. Trying to contact Whirlpool warranty/service department has been a nightmare. Once I did get them they spent almost a week trying to locate someone in my area to service it. I was in constant contact with the phone support person, but they kept telling me its out of my hands a special unit was making calls to find a repair person. After almost a week they informed me they could not find anyone but if I could find someone to service it they would reimburse me (max $250 labor). I spent 5 minutes and 1 phone call and I found someone.They wasted a week bumbling around with wanton disregard for their customer. Their service after the sale is deplorable. They are staffed by people who answer calls but have no ability or authority to fix a problem. Worse yet, they kept telling me it was out of their hands. If not in their hands, then whose? I assure you I will never buy another Whirlpool appliance simply based on this warranty experience. What a horrible way to treat your customers. Shame on Whirlpool!

Whirlpool 500galaxy gas water heater - First week ran great. Now Im lighting every day. Called Whirlpool and just getting run around. Had it a month today, still lighting every day. Cant afford to buy another.

Bought in October 2014. Died December 2015. The previous Whirlpool microwave this unit replaced was 10 years old and carried a 5 year warranty on the magnetron. Imagine my dismay to find out this unit carried only a 1 year warranty on the magnetron. So 2 months past warranty expiration Im left with a dead unit. I performed elementary troubleshooting. The unit has a fuse on the 120 Volt input. But the unit must be disassembled to gain access to the fuse. So what SHOULD be a five minute job turned into an hour and a half. The fuse wasnt the problem - replacement fuses blew like popcorn. Fuse placement within the unit without regard for service considerations is a poor design.To their credit, Whirlpool agreed to cover the cost of repairs if I would pay for labor. I agreed. A tech came out and looked at the unit. He said that he would have to order a bunch of parts and that he would be back in contact by the end of the week. Three weeks went by. There was no call from the tech; my messages on his voicemail generated no response. So a couple of days later I purchased a replacement from a competing manufacturer.

Bought this unit for our daughter that lives in a apartment building. She loves it and keeping her cool at night.

We purchased a top loader Whirlpool Cabrio Platinum Washer and within a few short months noticed a mildew-like smell emanating from it. This is DESPITE the fact that we leave the top up the entire time that the machine is not in use, we use hydrogen peroxide and ammonia in our loads of laundry in order to kill any mold present and my husband painstakingly hand dries the interior of the drum after each load of laundry. He also puts hydrogen peroxide in the fabric softener dispenser in an effort to kill the mold/mildew. None of this has helped to mitigate the ongoing mildew/mold odor. We have run across other online reviews which suggest that the Cabrio does not fully drain the water in the washer leading to the potential for the development of mold and mildew. This is very upsetting as we paid a lot of money for the Cabrio and had high hopes for it.

The washing machine does not wash the clothes. It does not clean the clothes and goes off balance all the time. I have had it 9 months and waited to write the review to make sure I using it properly and giving it a chance but to no avail. It is awful. It leaves white lines on the dark clothes and does not take makeup stains out of the white towels. Those are just a few examples. The clothes have to be washed sometimes twice to feel they are clean enough. So it is not cost effective and uses more water which is counter productive to the HE.

I purchased this heater in 2009. I have had so much problems with the pilot staying lit or the thermocouple. Had to have that changed, have to clean under heater monthly. I have called Whirlpool numerous times because the pilot light goes out. Now I have a problem with it staying lit. Whirlpool tells me I have to pay for service labor. They sent out a technician who broke the igniter and I am being told I have to pay labor cost to have this fixed. THEIR TECHNICIAN BROKE THE IGNITER BUT THEY WANT ME TO PAY THE LABOR COST TO FIX WHAT HE BROKE. I have had it with Whirlpool. This heater is a piece of garbage as far as I am concerned. I am tired of having no hot water.

What a POS. Havent even used the thing to cook a meal yet and already some chunk of metal fell out from the port at the top left inside the oven (behind the vent). It was clearly cheap pot metal. What else is this thing made out of?

My wife and I bought a Whirlpool water heater NU50T121-403, SER# 0733323 as we researched online the best efficient water heater for the money... which was actually more than we budgeted for. We purchased it from LOWES and our Plumber had to return the first heater due to a huge dent on the outside of the body once it was removed from the box. LOWES replaced it, no problem and he installed it. GREAT, HOT water for about six (6) months. Pilot light went out and has continued failing after relighting numerous times! Now we have the four (4) blinks indicating that the Honeywell gas control needs to be replaced only after 27 months of use. Whirlpool offers 12 year warranty on tank & parts, but come to find out, not this part. We were both raised on Whirlpool products and thought we based on our parents successes of various Whirlpool products, we were buying quality brand. We were soon disappointed and will never buy another Whirlpool manufactured Brand again!!

We bought this washing machine in 2013 from Plass, an appliance store in Chicago that is now out of business. The top loading plastic lid that holds the glass piece snapped and broke. I called the company, and they said that there is not a recall but that I could order parts. They put me on hold, and 10 minutes later, I was on the phone with a company in Missouri that wanted to sell me a lid for $219.38 plus tax and shipping. I am surprised to see that others are having the same problem and that there are no recalls from Whirlpool!

I stumbled across this page on another mission and had to stop to add my exp. Perhaps I got lucky and got a good set but Im on my 3rd year and my washer and dryer are my friends. I dont have hot water connected to my washer and my husband is a shingle roofer so I often have to wash his clothes twice but my dogs beds come out beautiful and the sanitizer on the dryer removes odors very well. My water bill went down, I can wash my rugs and large comforters at home now. Plus they are so pretty. Im sorry you are all having so much trouble but I love mine sooo much I just had to stop a moment to throw in a little positive.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

This refrigerator well paid for itself. I had over 25 years and it was still in good working condition. I had to leave it behind. I moved to a place where fridge was already. I hated to leave it behind. ‘twas offered to Goodwill but they never answered the phone for it. I surely hope someone got it.

Uses little soap. Not sure on clean. Don’t think front loader clean as well as top loaders. Would recommend top loaders with no agitation. Also would recommend white as a standard color. I am unhappy with the way a front loader works. I am happier with a top loader, cleans better.

Bought a Whirlpool Cabrio Washer, which I see has MANY complaints. I had a problem with the F1 issue during the first year. Same issue and I was also told Whirlpool knows it was bad design yet they refuse to help the consumer in anyway. Maybe 50% a new WP washer. Upon my call they will fix it for 389.00 and give a 1 year warranty again. Im no longer confident in WP products.

I have the model FG1H5040T3NOV water heater and had found this message board. I called the number posted by Chris with American Water Heater and provided them with my serial number. They shipped me the replacement assembly next day and after about an hour, I had it installed and working again. Im not too happy with the fact that it failed, but it does appear they have their act together in getting the replacement parts distributed.Based on the discussion with the person on the phone, my only real gripe is this: the cause of the component failure was potentially caused by a dirty-flame trap that supposedly needs to be cleaned regularly. Since the trap is underneath the water heater and is in no way really accessible, relying on people to see the fine print in the manual (which hardly anyone reads) isnt sufficient. At an absolute minimum, a very clear and apparent sticker should be included on all water heaters indicating this needs to be cleaned and a clear description of how to clean it properly to prevent this sort of unnecessary headache in the future.

I bought my refrigerator side by side on April 16th 2010 at Lowes. Not even six months, the liner inside started to get cracked. I called and they send serviceman. He just put a tape to cover the cracks. I called Whirpool corp and they told me its cosmetics issue so our warranty does not cover cosmetic problem for as long it works and cools. I will never purchase Whirpool brands. Lesson learned.

In 2010 we had to purchase a new hot water heater. Went to our local Lowes store to see what they offered. We decided to buy a Whirlpool energy smart electric water heater. It was large, 50 gallon. We have a large family and didnt like running out of hot water so we thought this would be great. Worked fine until yesterday when I kept smelling an odor like something melting. Could not figure out where the smell was coming from until this morning I got in the shower and had very little hot water. Went downstairs and seen the water heater was not working. Got the user guide out to see if we could pinpoint what was wrong. It said no power to control board. I checked the breaker box and found no problems. I got a flashlight to look at the control board and discovered it had overheated and melt the top of it. Have been on phone with Whirlpool nonstop with just a recording. The heater has a lifetime warranty so Im trying to get the replacement part for it that will cost me $115 plus shipping. I am really concerned that with this overheating it did not trip the breaker. Grateful it did not start a fire and worried if we repair it will this happen again and possibly not be as fortunate. I have seen on this site of another complaint with the same problem. Shocked there hasnt been a recall issued. Be careful!

I purchased a brand new fridge in July of 2014 (model wrf990slam00) hoping refrigeration repairs were now behind me. They were not. The ice machine did not work from day one and they knew it was defective when I called so they had someone come out to replace it. Just over a year later it is not working again and my freezer will not freeze either. They tell me I am now out of warranty and any repairs going forward will be out of pocket. Congratulations Whirlpool. You make products that last a whole year. Do not buy Whirlpool. They could care less about you or the quality of their products.

I have had my washer dryer set for only 3 years and have all the problems that have already been posted. Whirlpool has no recall on this washer (Cabrio) and does not plan on helping out anybody in any way. Their solution is pay for everything out of pocket or buy their one year warranty for ironically the price of what a new motor, and any of the other common items that are breaking would cost. And this is only good for ONE year. With the history of this company I would expect this to last at least ten years or longer before we start discussing replacing anything. I also had a Maytag that I had a problem with and did not get anywhere with that either. Whirlpool/Maytag, you need to stand behind your product. Your name is not going to get you anywhere nowadays. This blog has a spot about legal representation. If you can help me, please contact me.

Purchased Black Ice French Door refrigerator in December 6, 2012. Used warranty first year due to loud noise & replaced whole back panel in top part. They seemed to know it was a design flaw. Thought all would be well. Purchased extended warranty for second year and did not need so did not extend again. Now it has been 2 years and 7 months and the ice maker had to be shut off due to water running down outside. The refrigerator is no longer cold enough--60 Degrees (too warm) and freezer door would not close all the way (had to duct tape it shut). I certainly expected it to last longer than that for a $2300 fridge. The old Kenmore was 15 years old and still worked. After reading all these reviews it is time for a class action lawsuit! We have to buy another now but it wont be Whirlpool!

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

I bought my Cabrio washer about 3.5 years ago. Little after the year, I had to replace the lid because the hinge broke. Then came the F1 code, which I noticed if you turn the machine off for a couple of minutes, it resets itself. About a week ago, it started making a grinding noise and staining the clothes with oil or grease. Transmission problems. I was told by the seller it had a 10 year warranty. I called them up and now I got to foot the bill for a technician to come to my house and tell me what I already know plus labor. Might as well buy a new one. Beware because I believe Kenmore is manufactured by the same company.

I bought a new house in Hattiesburg with a Whirlpool dishwasher that is loud. It runs normally but when you open it the dishes are just as dirty as when you put them in if not worse since it will spray any residue from the bottom to the top shelf. I have taken it out and inspected all lines and such but can find nothing wrong to the naked eye. Thus I’ve got dirty dishes that must soak since the drying cycle retakes grime back on and then be rewashed.

I have purchased two Whirlpool microwaves since 2007. The first unit lasted 5-1/2 years, the second one lasted only 2-1/2 years. I used it at dinner but several hours later it was dead. After reading other reviews I have decided it would be cheaper and less stressful to get a new one. So Tomorrow I will be purchasing a new microwave which WILL NOT be Whirlpool. I no longer have confidence in any of their products.

Sad that I have to file this review! After reading multiple other reviews on all brands available to American citizens, I have come to the realization that cheap labor and materials are creating massive appliance garbage in our country as well as financial rip off for us all. It needs to STOP! What has happened to doing things right!! What company is going to be the first to produce good refrigerators! Paid over $2000 for my side by side and it is only 5 years old and has a freon leak that cant be fixed. Repairman said will have to buy a new refrigerator. Pathetic!! Cheap manufacturing in foreign countries is killing our economy and our household finances. Be prepared to buy NOTHING that works! Yeah, thats what I work hard for and look forward to. Americans better wake up.

I bought a Whirlpool Cabrio Top Loader High-Efficiency Machine on March 20, 2013. 14 months later, it failed. When I called customer service I was informed the 1 year warranty had expired (I knew this already) and that all they could offer me was a $319 extended warranty to fix machine and guarantee covered future repairs. Luckily, I had the machine repaired at no cost to me after complaining to the sales people I bought the machine from the year earlier. They contacted their Whirlpool representative who had the repair covered. Now, 3 years and 11 days after purchasing it, it failed again. This time the machine would no longer spin out the water. Whirlpool offered nothing more than to give the website and special code for a discount on a new machine. After some haggling, they agreed to pay for 50% of the parts only, no labor. I argued this machine must be a lemon, as they have told me theyve heard no prior issues with this machine and that it would be reasonable to replace this machine. They refused any further assistance. So I threw this piece of junk away and instead, for $185, bought a simple rebuilt 15 year old Maytag washer with agitator, direct drive. Just a couple of knobs. No computer, fancy bells and whistles. I can say with absolute certainty that I will never purchase a Whirlpool product ever again. I also believe these machines are no longer meant to last like old washers (and dryers) used to.

Whirlpool Dishwasher MOD#WDT970SAHZ0. I have to wash the dish before it goes in otherwise it doesn’t get food or anything off. It DOES NOT DRY at all. Even when I add the heat extended dry button. The normal setting takes 3 hrs & 12min to run & again, doesnt really wash & for sure doesnt dry. I have added jet dry. I called and they keep telling me it should have more jet dry! Ugh! I now have rust happening because it doesn’t dry. DO NOT BUY THIS MODEL.