We purchased our Whirlpool dishwasher/Model no. WDT780SAEM in July 2016 and it was installed on August 3, 2016. Right away we noticed 2 problems. The top tray squeaks very loudly when being pulled out for loading and unloading. The usual temporary fix for this would be using a product like WD-40. Of course as soon as you run the dishwasher all of the product is washed away. This was our first complaint about this dishwasher. The more important problem was the white cloudy residue being left on all of our clear plastic cups and glasses. Weve always had hard water but our previous dishwashers were able to remove the residue if we used the high-temperature wash. After looking at all of the manuals and user guides that are included with the purchase we read that we should be using a rinse agent and a product such as Lemi Shine to deal with hard water deposits. We tried these items and nothing worked.Using the All Fresh tabs didnt help and our filter was clear and clean. So we made an appointment to have the Whirlpool factory serviceman come out to look into our problems. First of all the customer service representative I spoke with was rude and impatient. She kept cutting me off and asking me about hard water and suggesting that I use all of the products mentioned above before finding out that I already had used them to no avail. Because we had the dishwasher for just over 30 days I asked her about the Clean and Quiet Guarantee that I found out about by going to Whirlpools site. Her exact words were The clean and quiet what?? So I didnt have much hope for our service appointment. Our serviceman was asking all of the same questions about hard water and if we had tried all of the products I mentioned above.After his visit we found out and now (too late) know that because our new dishwasher does not have a heat booster or the ability to get the water temperature high enough to remove the hard water residue theres nothing Whirlpool will do for us. This is the case with all newer technology dishwashers UNLESS you purchase one with a heat booster. I sure wish this wouldve been made clear to us, the consumer before making our purchase. If we had known beforehand that new dishwashers no longer get the water up to 140 degrees which is what would be needed to remove the residue, we wouldve made sure our model included a heat booster. Now were stuck handwashing our plastic items if we want clear dishes. Its not the end of the world but its not good customer service or honest to the consumer in any way, shape or form.

We purchased a Whirlpool oven a year and a half ago. Today the interior glass exploded while cooking frozen French fries. Whirlpool customer service indicates that this is unusual. Whirlpool indicated that the only way they will repair it is if we pay $375. We declined to pay an additional cost for this product which failed to function safely. In a quick Google search, it appears that the oven glass fails more frequently than represented by Whirlpool. We are disappointed in this product and the companys customer support and lack willingness to correct a product safety issue.

Model #RF262LXSQ Serial #RT2031953 - I purchased this appliance from Lowes approximately 6 years ago. Last week, I was heating soup and about 5 minutes after I placed the pot on the stove on medium, I heard a large pop and then several cracking noises. When I entered my kitchen, I found the burner flaming red, and when I tried to remove the pot, it was stuck. I immediately turned the burner off and after a few minutes, when it began to cool, was able to remove the pot. What I found was the glass top had melted and blistered and was cracked from front to the back of the stove. Although Lowes was not able to help me, they suggested that I contact you as they had never heard of this happening before. Not only am I dissatisfied that a stove should last many years past this purchase, I am inconvenienced until another stove can be delivered. I believe this to be a factory malfunction of the stove and request a credit for my purchase.

Whirlpool contacted me today about a review I posted on their website about the washing machine I purchased from one of their distributors. It was not to say they were sorry for the washing machine ruining our floor or our clothing. It was to say that they will not post my review because the model number is not the same as the one I purchased. Unfortunately for me my model was manufacture discontinued and although they look alike this new model is significantly different than the previous model it replaced (I will believe that when I see it). So they obviously knew there were problems with the earlier machine. I am outraged that whirlpool would stoop to such low business tactics to sell their garbage to people and then treat them like dirt.

When we remodeled our kitchen after checking a lot of brands of oven we decided to buy the Whirlpool Self Cleaning stove/oven. Loved the look of it. When trying to clean the oven I followed the directions just as its said in the manual. After the cleaning was complete it didnt even look like it clean the oven. I called customer service and they told me I had to clean the oven with a little elbow grease before I put the self cleaning on? Really? I have to clean the self cleaning oven by hand beforehand? Why did I purchase a self cleaning oven then? And because it was just 2 weeks out of warranty they would not help at the 800 number. NEVER NEVER again will I ever purchase Whirlpool! How they treat their customers is disgusting!

I dont take pleasure in writing this review and to the readers, please know that this is the truth without bias. Before you buy from Whirlpool or purchase their extended warranty, you should know: I am writing this review based on my personal experience. I purchased the extended warranty in 2017 (approximate) for three years. In 11/2018, our Whirlpool dishwasher, model wdt920sadm2, which was purchased with our new home in 06/2016, began having issues and was not drying the dishes properly. I called Whirlpool warranty and requested service.Approximately 10 days later, a repairman from Convenience Appliances Service Inc. (repair tech) came and fixed that problem (wasnt drying). My wife turned on the dishwasher the very same day and we came back and the floor was flooded with water. We believe this was contributed to the initial repair and has never happened prior to that. Fast forward, approximately 5 service calls or more later (not embellishing), the dishwasher is still not repaired and the technician can’t figure out where the leak is coming from. On 02/25/2019, I received a phone call from Ms. **, Whirlpool/AIG care team (AIG is the underwriter) and was offered $540.75 and I would be required to complete a “proof of destruction affirmation” form.I accepted the offer and received an email the same day stating: Thank you for contacting Whirlpool Extended Service Plans Consumer Care Team. Per our conversation, I have attached the affirmation of destruction for your dishwasher. Please verify the information, sign, and return to us. Once we receive the affirmation of destruction back, we will start to process your prepaid debit card. That card takes 10 to 15 business days to process and will arrive to you by FedEx. If you have further questions or concerns regarding your Whirlpool appliances, please contact us directly by calling toll-free (866) 931-7390 to reach a representative for immediate addressing of these issues between 7 a.m. to 10 p.m. ET daily, or by emailing AIGservice@whirlpool.com whenever the need arises. Sincerely, Mable. U.S. AIG CARE TEAM.That same day, I received an emailed the affirmation of destruction form back to Whirlpool on 02/25/2019. I was impressed at the time that they reviewed the repair case history and made this fair offer. My wife and I began to look for a new dishwasher and canceled the future service appointment with Convenience Appliance Services because of the offer and acceptance. On 03/01/2019, I received a call from Convenience Appliance stating that Whirlpool contacted them and they are taking back their offer because their employee (Whirlpool) didn’t follow the terms of the contract. I called Whirlpool/AIG care team and spoke to ByonBera who stated that she was sorry to hear this complaint and would forward this to her manager for resolution. On 03/04/2019, I received an additional call from the Convenience Appliance Services Inc. and they stated that Whirlpool representative was not very nice to them and that they still wanted them to come out again to my residence on 03/11/2019. On 03/04/2019, I called Whirlpool/AIG care team again, and spoke to Tandy, who again apologized and read their company script and that they are sorry but still reneged on their offer. She then transferred me to John, who again read through his script/terms of the policy. I explained in detail that Whirlpool contacted (as per their email) me directly and they made the deal. I never called and asked. I completed the affirmation of destruction as requested and was promised $540.75 within 10 to 15 days by FedEx. John stated that he would have to kick this up to their resolution department above him to see if this can be rectified. John stated that this has never happened where the customer is involved (mistakes are normally caught before the customer is contacted) and that he could understand my complaint and frustrations. I received a call back from John on 03/04/2019 that Whirlpool will not keep their offer and that a repairman will go out as scheduled even though they made the offer without solicitation! Incredibly upsetting and disappointed!!! I have never experience anything even close to this from a major company like Whirlpool. It is evident that they don’t keep their word, that customer satisfaction doesn’t matter even if they are 100 percent wrong, and that their dealing are very deceitful! We since canceled our order for a new dishwasher and are now forced to wait for the next repair attempts again. If you get anything from this long-winded review, really think twice of making a Whirlpool purchase, or their extended warranty! Whirlpool really could care less of their customers and in addition, their warranty, in my opinion, is a scam. After this I, nor my family will ever purchase a Whirlpool brand appliance again. So please be careful and learn from my experience. Never again! Whirlpool should be ashamed of themselves.

Whirlpool Duet WFW94HEAW0 Washer - Bought the machine in Feb 2014 and was generally very pleased with it. However a few weeks ago we started getting oil/grease stains on clothing. Wasnt sure what was causing it but it has now got so bad that the machine cant be used. An internet search indicates it is possibly a ball racer ring and doesnt sound an uncommon issue. A call to Whirlpool resulted in a quote for circa $350 for a service call. Thats a 1/3rd of the original value (includes a 12 month warranty). And its just over a year old!!! We had a problem with the Maytag Neptune that ended in a class action suit and now this replacement machine seems to be even worse. I would recommend anyone to really consider what to buy and give this range a miss.

We bought this refrigerator because it was the only panel ready one we could find. When it was delivered the two doors did not line up. There was an adjustment that could be made but it required that Whirlpool had to do it. We made an appointment and was told it would cost $179 for the adjustment!! This for a refrigerator we had just purchased for several thousand dollars. The service person showed up and after working on the refrigerator he could not balance the doors. He blamed it on uneven floor, misaligned cabinets – anything he could say to shift the blame from Whirlpool. We called and complained again. They sent out another service person. He was just as useless as the first one. Told us to even out the doors we would need to shim the refrigerator which he would not do. Complained to Whirlpool with no results. Finally hired someone not affiliated with Whirlpool who was able to get the doors to be aligned. Never Never buy a Whirlpool/Kitchen Aid Appliance. They do not stand behind their products and do not care about their customers!!

I purchased a Whirlpool 12-gallon point-of-use water heater as a booster when I was going to get a tankless and when we decided that we didnt need a tankless, I tried to get an RA number through the manufacturer so that the store could give me credit, as it says directly on the water heater, Do not return to store. They said there is nothing that they will do and it cant be returned to the store. So, what am I supposed to do with this water heater now? Before I knew this was going to happen, I purchased a 50-gallon Whirlpool water heater as well. So now, I have the 50-gallon that I have had to replace the element for already and I have only had it for less than a month and a half, and the 12-gallon is just sitting in my garage. Im completely irritated with this company and do not recommend anyone to go with this company! This is the worst customer service!

I bought my Whirlpool gas stovetop in March of 2016. The burner knobs that connect to the stove is made of plastic and all 5 knobs broke within the first year. Each year I have replaced knobs and had issues with the knob breaking and then not being able to tell if the gas is off or on. I have called and talked to people at Whirlpool about this issue several times. Although they seemed concerned they will not replace the knobs and I have had to purchase them through Whirlpool. The gas stovetop obviously has a serious and extremely dangerous design flaw. I have kept some of the broken knobs just to tell others about this terrifying flaw. Again, last night the gas was on for several hours before we discovered it!! I called Whirlpool again and they were unconcerned. The Model is #WCG97US0DS00, Serial#D60509297. Beware and DO NOT PURCHASE this gas stovetop. I wish I had not bought mine.

Unfortunately, I can not rate this machine LESS than one star. I would rate it ZERO. We purchased the Whirlpool Cabrio washing machine model WTW7800XW0, 2 1/2 years ago in 2011. Since that time, we have had nothing but trouble from this machine. The machine basket gets off center when you have heavy items in there like jeans or a large load of towels and just stops working until you raise the lid and even out the clothing in the basket. If you wash something like a throw or a set of sheets in it, they get all twisted and wrapped around the thing in the center and end up in a big mound. We have had the glass top lid replaced on this machine TWO times over the last 2 years because the plastic frame on the lid around the glass cracked and broke and became warped in a raised position. This caused the machine to stop working because the machine will not wash clothing unless the door is locked down, and the door cant lock if the lid is cracked and warped and broken. So you have to set something heavy on top of the lid to get the lid to lock so you can wash a load of clothing! TWO times we have had repair people out to our home to replace the lid and now the lid is cracked and broken again, for the THIRD time! This is THREE broken lids in just over 2 years. Unacceptable!! The hinges on the lid that attach the lid to the machine are also rusted. This rusting has happened on all the lids that we have had replaced in the last 2 years. I will never, NEVER purchase another Whirlpool product again, EVER. Their products are inferior quality and JUNK. We have the Whirlpool dryer also to match the junk washing machine and the quality is just as bad but we are living with it because we have no choice right now. It takes 2 hours to get a load of clothing dry and forget drying jeans or towels; it takes forever! Whirlpool makes a dreadful product and their customer service is even more dreadful. =(

We purchased our refrigerator about five years ago and we have dealt with it freezing up constantly. The coals and vent are at the bottom of the refrigerator. I believe that is a lot of the problem. We have continuously blowed off the coals to keep it from freezing up but sometimes its still freezes up. I do not recommend the two-sided door Whirlpool refrigerator.

I have a Whirlpool stove. Theres nothing but problems with the oven sensor. This is the 3rd time we have to replace it. It had problems ever since I bought and thats been 11 years ago. My Magic Chef lasted 13 years with no problems. I have a Whirlpool microwave that had a recall on it. Never buy Whirlpool!

First Id like to start by saying anyone whom owns Whirlpool make sure to purchase every extra Warranty you can get your hands on right away. Two years ago my husband and I purchased the whole Whirlpool Appliance Kitchen Collection. The gas oven range has been my only real issue. Within a few months my oven wouldnt light. Its a good thing I noticed because there are no safety features that turn the gas off if it doesnt fire up and the gas builds up so so fast its scary. Our Warranty covered the broken igniter switch only for it to act up for over a year. We had to try several times before the oven would light until it just didnt again and it was repaired again under Warranty. Aqua Lift Technology is just something they made up to get us all to purchase it. I swear on my life it doesnt even work a tiny bit. Now, the bottom of my $800 oven is chipping away. I have not worked this out with them yet and I will repost to let others know how it works out. Liquid also gets in between glass oven door, cant ever clean it. Good luck.

I have purchased two Whirlpool microwaves since 2007. The first unit lasted 5-1/2 years, the second one lasted only 2-1/2 years. I used it at dinner but several hours later it was dead. After reading other reviews I have decided it would be cheaper and less stressful to get a new one. So Tomorrow I will be purchasing a new microwave which WILL NOT be Whirlpool. I no longer have confidence in any of their products.

Whirlpool Refrigerator 36 inch #WRF993FIF. We have owned refrigerator for 3 months and both ice makers went out. Worst customer service ever with Whirlpool and their appliance specialists. Ordered new ice maker, but still broken. Whirlpool is saying it needs a new door!!! I have asked for a new refrigerator, but cant get anyone to respond. I have called 6 times being on hold one time for over 30 minutes trying to get a scheduled appointment for a new door! This is by far the worst service that I have ever received from a company.

I have been unhappy with my Whirlpool Cabrio washer since I purchased it from Lowes. I should have looked online before I bought it and then I would not have made the mistake of buying it. The washer leaves soap deposits on the clothes and sometimes leaves a colored soil. It has ruined numerous clothing by tearing out hems of towels and wash cloths and tore a hole in a favorite sweater. I prefer an agitator in my washer. From what I read, I will soon begin to have other major problems and then I will replace it, but not with a Whirlpool.

Whirlpool Cabrio washing machine - We purchased the (best name brand) from Get It Now and all we ever had was problems. We will fill the washer 1/2 full of clothes and the clothes on top would not even get wet. So we have to do it again, to make sure the rest of the clothes were washed. Many times there was white smudge marks on the clothes, sorta like powder (we use only liquid soap that you recommend). Today I washed a child’s bedspread for the 4th time because the stains would not come out (from a cookie). I had to turn the bedspread twice just to get it wet. I used bulk load and heavy duty load and it doesnt work. Your product is a very big disappointment for the price a person has to pay. I will recommend that no one purchase this product. Your people need to do further research on who this machine cleans clothes.

Bought a new Cabrio, worked ok but in less than 2 yrs the bearing is bad. It will cost almost as much to repair as a new washer. Will never buy a Whirlpool product again. Would give negative rate!

I had my washing machine for about 10 days before it stopped working. I did about 4 loads of laundry. We have had 3 repair people come check it out, all referred by Whirlpool. They each had a different theory on why it wasnt working properly. Im now waiting for parts to be delivered and then service to be scheduled. When I contacted customer service, I was told (after waiting on hold for about 1 hour) that it was customer misuse. Ahem, first I heard that, and I think I know how to use a washing machine. I asked to speak with a supervisor. More waiting. Tina (#**) told me she will contact the service company about the parts. I told her to please conference me in on the call because I want to hear the outcome (and I dont want to wait another 1+ hour to reach customer service again). She put me on hold and then disconnected me! Really, all this time and 3 service people... Would be cheaper to just replace the machine altogether. What a headache!

I owned a Whirlpool refrigerator for over 16 years and never had a problem. Purchased a new one about 21/2 years ago only because I moved and the size didn’t fit. Love my Whirlpool refrigerator. No complaints.

Purchased Whirlpool Cabrio model WTW6400SW washer and dryer 1/7/2007. The matching dryer was dead on arrival and the second dryer motor died within a year. Washer: 1year 2 month the washer motor died. Whirlpool paid for the part and I paid the labor. The following year, the bearing went out and the outer tub was replaced (the bearing is inside the plastic outer tub - bad design. Whirlpool paid for the part and I paid the labor. Feb. 2011 had one of the F errors. Whirlpool repair tech came out as the tub would not drain and it was a wire that had come loose underneath washer - another service call charge. Dec. 20, 2011, I had an error F50. The Whirlpool repair tech came out, verified no clothes or money stuck in the machine. All clear. He called higher level whirlpool tech and they paid parts and labor to replace the main control board and the RPS Sensor. Im single and am not abusing this machine. Like everyone else who posted. I paid close to $1,000 for this washer (not including the dryer) and I have been a faithful Whirlpool customer for 3 generations, but if Whirlpool doesnt offer some kind of compensation/trade in credit to customers who purchased this (knowing that the design is bad/faulty) washer and discontinue this model. This will be my last Whirlpool. I will have lost all faith in Whirlpool. The Whirlpool service tech that I found is op notch. I will miss him if I have to switch brands. Im putting 1 star as I know this machine will not be operational for 9 years which is the minimum that I would expect. If it makes it to 6 years without another service call, it will be a miracle.

Just bought two new Whirlpool water heaters, $469 each. Not impressed. One of the MANY issues: water leaking from the top. Reason: before installing, if you look inside female threads, you may see a rubber gasket (heat loss valve). One of the two heaters of mine was missing one. This showed me what the quality of the joint was like under the gasket. I temporarily removed the other three (two heaters) to confirm what I saw: At the backside of the threads there should be a clean flat landing from which to the male nipple should tighten against (washer in-between). Instead, there is a disaster of a flimsey lip (washer-like) which is torn up and not anything close to flush. Bad Whirlpool! Bad quality control!

I bought my new ceramic top electric range/oven with convection, and the aqua-lift cleaning system in spring 2017. The aqualift cleaning function is a joke, so be prepared to be down on your hands and knees scrubbing. Im careful, and Ive not spilled anything yet, but the oven still gets splatters from roasting meats, etc. Id hate to see what Ill have to deal with when I actually let something spill. Today, as I was down on my hands and knees trying to clean it, I noticed that the enamel is chipping off where the oven racks slide in. Great. I have never had an oven where the enamel came off, much less within a year. I am struggling with heart failure, and I am not up to fighting with Whirlpool.

We bought an 80 gallon lifetime warranty electric water heater. We get about 20 minutes of hot water and then cold water. Weve had 2 plumbers out and checked our system and said it has to be the water heater, but they dont want to mess with it in case it voids the warranty. Fine. We called Whirlpool and since the alarm system isnt indicating an issue, they say its not the water heater. We now have to do a diagnostic ourselves to find out if it is the water heater. What? It has a warranty! We are not plumbers! How come Whirlpool doesnt think its their equipment? Weve already had ours checked and it isnt us! So frustrating and we will not buy another whirlpool product again! Not good customer service to promote repeat buyers. Whirlpool, shame on you.

I am the owner of a 4-year-old stainless steel Whirlpool refrigerator, Model GB9SHDXPS02. Yesterday morning, my 5-year-old daughter opened the fridge door to get a snack. The door came crashing down, hit the floor - missing my 21-month-old daughter by less than two feet - the drawer smashed off on impact and flew across the kitchen floor and the contents of the drawer (salad dressings, syrup, condiments, etc) went flying too. Miraculously, no one was hurt. My children were obviously upset and crying, and I was shaken. My laminate floor has a large dent and long scratch from the impact.My fridge door is broken. I cannot get through to Whirlpool Canadas corporate office to speak to anyone. The Whirlpool Canada call center is giving me the runaround. Yesterday I spoke to a supervisor at the call center who advised me that someone from the Corporate Safety Division would phone me within 24 hours - but I have not received a phone call and it has been more than 24 hours. I am noticing a complete disconnect between the gravity of the situation and an appropriate response from Whirlpool. I am a mother of 4 small children - two of which were very nearly killed/badly injured by a faulty refrigerator door. I cant even get a phone call in response. This is a serious safety issue. Im tired of apologies, some real action needs to be taken to ensure this never happens again to any consumer.

The broiler came on its own during the night. We went to bed at midnight. 4:30 in the morning woke up to a smell, the broiler was going wide open. It had melted the handle off the front of the drawer. There are cookie sheets in the broiler. We dont use it, we have never used it, it was so hot Teflon on the cookie sheets burnt off. The side of the stove was so hot I couldnt touch it to get behind to turn off the gas. It almost burnt my house down. The carpet and the wall are black in the back.

These are the worst washer and dryer I have had. I had them for 5 yr and have had repairman at my home 14 times. They still are not fixed. The dryer is so loud you cant hear the TV. Washer squeaks, gets off balance.

The Whirlpool washing machine came with our apartment. It is a top loader, which I like. The only difficulty is that no matter what I clean the interior with, I cannot seem to get it clean. It gets very dingy, even with HE detergents.

I purchased a (second) Whirlpool washer (WFW87HEDW0) in October 2014. Since purchasing (and to this day), I manually dried the rubber gasket after completing my daily washes, knowing that mold growth was possible. I wash one to two loads of clothes about three to four days per week. During the first year, I did not notice any mold in this area and was confident that the manual drying and cleaning with Affresh was preventing mold growth. However, at the beginning of this year I discovered a little mold growth, which has slowly been increasing, in the inside lower lip of the rubber gasket. The image attached reflects mold in its current state. I was very surprise to see this happening since my diligent cleaning has been thorough and never ending. I even remove the soap dispenser tray to clean and air dry it outside of the washer and leave the washer door open at the end of the daily washes for extra fresh air circulation. This is my first official complaint about a Whirlpool front loader washer, even though I previously owned another (GHW9200LQ0) before this one and had mold growing on the rubber door gasket but, unfortunately, never officially complained about that old machine. Now, I dont qualify for the $500 compensation because I never officially complained three times within the first five years of owning the old washer. To my dismay, I did not immediately realize I had mold growth in the old washer. It was only until years later that a repairman told me that I had mold growth in it. In addition to telling me the price of replacing the rubber part and replacing a broken water pump plus labor would cost as much as buying a new washer. Before purchasing a new washer, I researched and read many reviews about Whirlpool and other brands before deciding on this new Whirlpool. I decided to give Whirlpool another chance and to follow their recommendations on the proper cleaning of the machine. Once again, I am disappointed and angry with Whirlpool and, now, have to figure out what to do with my current situation.

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

I purchased the Whirlpool Cabrio washer and dryer about 5 years ago. I wanted to pay for a good pair to last a long time for the money. We have had a repair man out twice for the washer. They ended up replacing the computer board. It worked fine for a few years. Now, it keeps getting the unbalanced error code for almost every load of clothes that we start. Sometimes, it takes 20-30 minutes of rearranging the clothes to get it to finally work. I have had to manually set it to finish the loads on a number of occasions. It is so time consuming to do laundry due to having to play with the clothes to get the loads to finish. Plus, I dont know how many times it has woken up my grandkids because of the loud thumping noise it makes when it gets unbalanced. I have never had a washer do this. I would expect when you pay big bucks for an appliance that it should last a long long time. One usually gets what they pay for. I should have bought a cheaper pair. Then, they probably would have lasted 15 to 20 years.

I always seem to get Whirlpool washers. They are dependable but when they break down theyre down and usually its better to replace than to fix it....I would rather have a Samsung product because theyre more modern and have better styles to them.

I like my refrigerator however is smaller and simple. The performance is great. The value was too much for the size and simplicity of the refrigerator not satisfy on that. Overall is very good and for the size of my family does the work. Im happy with it but will be upgrading in a later time.

I have a brand new Whirlpool washer (Model WFW9640XW). It has been broken for 3 of the five weeks I have owned it. The Whirlpool cusotmer care cannot get me a working part in order to fix the machine. I am being told that I just have to wait until they find the part, with no end in sight. I am held hostage now that they have my money. I am told there is nobody I can talk to to break this impasse.

This washing machine is awful. It takes twice as long to wash clothes. My older washing machine did clothes in 30 minutes or less. This thing takes over and over stop go, stop go, stop go. Open lid it fills again and removes water, when spinning the lid locks and you cannot open it without unplugging and starting all over again. The wash doesnt even circulate to clean the clothes properly arggghhh. Annoying as all get up. The washer has no control for the water level. The clothes dont have enough water to clean or rinse. I spent over $500 on this and cant get rid of it as most people are selling these on local websites as they hate them as well. Whirlpool thank you for taking my money and producing this junk. Never ever again! I think the seller is also responsible for not telling me what to expect of this junk.

I bought a Whirlpool washing machine on 16 Feb 2011. I started having problems with it in June. It was making very loud noises when it was agitating and the clothes were still wet after the spin cycle. I called Nebraska Furniture Mart where I purchased it and they said that after 30 days, I had to call the manufacturer. I called Whirlpool and they sent A&E out to fix it. The technician that came out spent an hour trying to figure out what was wrong with it. When he was gone, I was left with two inches of water on my washroom floor and I had to pull the washer and dryer out myself to wipe it up. He ordered a part that came the next week and a different technician came out to put it in. After looking at the washer, the second technician said that the first technician diagnosed it wrong and he ordered a new transmission for it. About a week later, the transmission arrived at my house and a third technician came to install it. The washer worked for a few days and started acting up again and leaking water. I once again called Whirlpool and they sent yet another technician out. I told Whirlpool that I had lost faith in A&E so they sent All Appliances out. The technician from All Appliances said that it needed a transmission and he would have to order it in. A few days later, he came back to install it. It worked for a few loads. The leaking had stopped but now, it does not spin out the clothes. To make matters worse, it now releases the Downy at the wrong time and I now have blue spots all over my clothes. I have made repeated calls to Whirlpool and talked to two different managers. I asked the first manager for her direct number so I wouldnt have to go through the whole explanation again if I needed to call back. But she gave me her number without her 4-digit extension so, there was no way of finding her again. When I talked to the second manager (by this time, I have lost my patience), I told him my whole story and I told him that Whirlpool has spent $1,000.00 between parts and technician service on a $460.00 machine and it still doesnt work. It is a lemon and I deserve a voucher for the full price to purchase something different.After one and a half hours on the phone, Lukas informed me that the only thing he could do was to send yet another technician to my home. I have lost all faith in Whirlpool and I believe that they do not stand behind their product. They only push you until the warranty has expired! I will never buy another Whirlpool appliance again!

We owned a Whirlpool Duet washer that went out in late December 2011. We bought another Whirlpool Duet washer on January 8, 2012. On July 31, 2012, it stopped working with the error message F24. In WV, Whirlpool contracts their insurance/warranty through ACE Appliance. We scheduled with ACE the next day. They came out on August 6, 2012. The repairman told me it would be 7-10 days for the part. The part was on back-order, so in reality it took 17 days before they returned. It was repaired on August 23, 2012. Today, September 17, 2012, the washer stopped working again with the same error: F24. Whirlpool will do nothing to replace the washer, even though it is less than a year old and we paid $900 for the washer. This is the second Whirlpool we have owned that has crashed. I have two small children (4 and 2) and I am due with number 3 in 3 weeks. While the washer was broken, I spent nearly $80 at the laundromat for washing only - I carried baskets of wet laundry home to dry. And now I get to repeat the same exact struggle less than a month after it was fixed. When asked, the customer service rep told me that no matter how many times it broke, all they would do is send a repairman. They never ever replace appliances regardless of the problem. I am unbelievably frustrated and I want to tell everyone that I possibly can to stay away from Whirlpool appliances! Do not buy them new! Their manufacturers warranty is a joke!

We bought the Whirlpool duet washer & dryer in the winter 2011. The washer is absolutely awful. I have to keep it set on the Whitest White setting so every load gets a second rinse. In order for my clothes to smell CLEAN I use bleach in every load I can. With the loads I absolutely cant use bleach in, I have to be standing waiting to put the clothes in the dryer or I have to rewash the entire load because of the smell!! My towels are ruined from the bleach and my clothes are faded because of the multiple wash cycles. I have used the recommended Affresh numerous times and it does not help! Needless to say this washer was a total WASTE of money! We will be purchasing a new washer very soon! It will NOT be Whirlpool!!

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

I have a nice basic fridge, 2 side by side doors on top and a freezer on the bottom. Also has ice and water on the door. It does exactly what it should do, keep my food cold! Works great, lots of room and has adjustable shelves. No weird electronics to break. Had it for 3 years and I love it. Also, its American made which is important to me.

Brand new Whirlpool dishwasher letting steam out ruining cabinets. Whirlpool admitted this has happened before. ** sent 3 different service repair companies to my house and all 3 told me the parts they recommended from Whirlpool was not going to fix problem. They finally after 3 different repairmen agreed to refund dishwasher. I requested they hire someone to give estimate on my kitchen cabinets. It was their product that done damage and I live in rural area and no one wants the job of restaining. If the cabinet is replaced it is expensive. Granite counters have to be removed and placed back, sink etc. I requested 3000.00 or Whirlpool send someone to give estimate. This has been dragging on for 2 months and still cant use dishwasher. Is that too much to ask for? This has been a nightmare and Whirlpool should be embarrassed. So many emails and messages and most of the time they are unreturned

Water filtration unit was leaking only when someone got water. It pooled into the bottom of fridge and ran out under the fridge and because of the slope of the floor was running back towards the wall. We didnt notice until our laminate wood flooring was starting to swell up. It was probably leaking since the day we bought fridge brand new, but took us 4 months to notice. Whirlpool said they will not fix our flooring, only the fridge. We had to make a homeowners claim which we did. When the contractor moved the fridge back after replacing all flooring it starting leaking from the ice maker unit. Only when the ice tray filled it would gush out water. Our flooring is now ruined a 2nd time and Whirlpool will not fix the floor. Repairman said that Whirlpool used rigid parts in the water and ice maker units and tons of people are having the same problem. Since there is no flexibility in these parts they break when the fridge is moved. Whirlpool sucks and I am fighting with them and Lowes to get this fridge replaced with a non Whirlpool appliance. I will never buy Whirlpool again.

I purchased an Electric Whirlpool Aqualift convection range in November of 2012. This product is garbage! The oven doesnt work well (temperature is always off), the Agualift cleaning method doesnt work well. You have to self-clean to clean it. The most troubling problem is that just after a year of owning it, the finish on the control panel started to crackle. I called Whirlpool, and all they can do is send me a replacement part for which I have to pay for and have installed. My last GE range lasted over 15 years. This range is garbage from day 1. Hate to see what it will look like in another year or if it will be working at all. BEWARE - DO NOT BUY WHIRLPOOL PRODUCTS!

We purchased our Cabrio washer and dryer in 2012. In 2014 we had to replace the rollers in the dryer. Since then it makes a loud clunking sound and it has to go through at least 2 or 3 dry cycles to dry the clothes, sometimes more. The washer lid lock doesnt work very well anymore. Sometimes it wont lock so I cant get the clothes washed. It takes forever to get it to work. Ill never buy Whirlpool again.

Purchased a matching set, Whirlpool Cabrio Platinum Washing Machine and Dryer in November of 2012. After just over 2 years, Im stuck replacing the Washing Machine at my expense! The washing machine began leaking water out of the bottom of the unit and became extremely loud when operating it. The repair technician said it was a seal and bearing that needed replaced and the cost of repairing the unit would be cost prohibitive versus replacing the unit all together ($800+)! Originally paid over 2K to purchase these units and have them installed. I do not want to trust or rely on the Whirlpool brand again. I would appreciate any recommendation for a better quality, high capacity, HE washing machine brand to replace the Whirlpool unit with (Samsung, GE, LG)??

First the ice maker stopped making ice and then the freezer stopped freezing. The unit is 2 1/2 years old. Whirlpool wants $1800 to repair! No Way. Purchased a Samsung and hope I do better with this one. So little to be praised about this American brand.

Whirlpool Cabrio - This washer and dryer have been garbage since the beginning. It does not clean soiled clothes and the dryer (gas) has always taken forever to dry a load. I have always had GE prior to this. I will never purchase another Whirlpool product again. We even purchased the extended warranty and the repair guy was out yet again and said it is not repairable. Now we are without a washer for 5+ days and its going to be reviewed. Review? I want my money back. Theres a lemon law for cars, there should be one for these machines.

This series is a complete dud. We purchased a home in 2015 that had a Whirlpool Gold Series refrigerator. The home was built in 2013 and appliances were brand new. The majority of our neighbors, whose homes also contained this refrigerator, have had to repair or replace this model. None of the homes in my neighborhood are older than 4 years. We will not be purchasing anything Whirlpool associated in the future.

WRF989SDAF 29 Cu. Ft.. Weve had nothing but problems from this refrigerator. Water filter stopped working after 3 months. At one year, the left corner froze over and created a big bulge and repairman said it was a recall for a part and he had to completely dismantle the left side of the refrigerator. At one year 3 months, the ice maker started leaking water and all the ice melted and ruined our hardwood floors while we were on vacation. At one year 6 months, the freezer stopped working and we had to throw out hundreds of dollars in food. Along with the freezer stopping, the ice maker stopped as well and the water dispenser starting leaking again. What a nightmare this refrigerator has been!

Ive owned this Whirlpool, bottom freezer refrigerator for two and a half years now. About a year ago I began to notice water on the floor in front of it. I had the ice maker hooked up, which I never used, so I disconnected that. The problem continued. I discovered that the bottom of the freezer compartment would fill with ice and once full the next dose of water would flood the surrounding floor. I have cleared the ice out, on a weekly basis, but have still had the water flow onto my floor. Its a daily thing now as Ive gotten tired of pulling the unit out and removing the ice build-up on a weekly basis. My replacement refrigerator will not likely be a Whirlpool of any model.

Like hundreds of others, my Whirlpool double wall ovens circuit board stopped working after 5-7 years. Accubake s-xt3704215 m-rbd275prb00 Whirlpool double oven. If it is happening to all these people, the protectors of the US consumer need to do just that!

We have a Whirlpool French door refrigerator with freezer drawer in bottom that is 2 years old. It makes a loud buzzing noise and freezes up in back of the freezer, as in a defrost problem. We have had THREE repairmen here to fix the problem, and after $650 in parts and labor, the same problem exists. Finally we were told that this $170 beautiful Whirlpool refrigerator is deemed repairable and is junk. Whirlpool will not remedy the problem and three service techs cannot seem to repair it. I will NEVER purchase another Whirlpool product... EVER!

One year old Whirlpool gas oven/range w messed up control panel. Every brand new Whirlpool so far has broken or is messed up within first year of purchase. I am going to complain to BBB.

My new energy-saving Whirlpool washer sucks. Laundry comes out smelling as bad as it went in. Washcloths are as dirty as they were when they went in. I have to take my dogs bed blankets to my sons home to wash them because this new washer will not even clean blankets.UPDATED ON 08/21/2015 - I have had two Whirlpool washers in 38 years. They were great. I buy a new up to date energy-saving Whirlpool washer and it doesnt last a year and a half. Now it is costing me $433 to have it repaired. I am preparing a washer and I am very unhappy with to start with. I will never recommend these washers.

I bought Whirlpool dishwasher (silver, Golden Series), after one year it just stopped for nothing and the circuit controller failed with error code E2/F2. So it was expensive but turned out to be totally unreliable. I had to pay $200 to get extended warranty and still waiting for the parts!!! Worst experience ever (uh Golden Series, for me it is Plastic Series). Will never buy any product from this company again.

The technician that was here to repair my propane water heater called Whirlpool to get help with the problem. The pilot would not stay lit, they would not help him. I told him it was installed in a mobile home and he had to cap the gas to the heater, it was still under warranty. Later I found out there was a recall on this heater and that probably was the reason they told him that. I ordered a water heater just for mobiles and am in the process of getting it installed. I kept the old heater for now and will still pursue this issue under the warranty.

I bought fridge model WRS571CIDm02. The worse company in the world. Since I bought this fridge have a consistent problem with the evaporator fan. It makes noise. Geek Squad came 3 time in 3 years to replace the same part. Now the 4th time I ran out of warranty and Whirlpool dont care. On top of that the stainless steel is rusting. It is not stainless steel. It is a nightmare. Avoid at all cost. If there is zero I would give it to them.

Whirlpool is an awesome fridge. There was plenty of room for everything. I loved the freezer part too. I would love to have another one because mine was in a fire in 2015. You will like Whirlpool.

When the fridge is running and there is a power loss of about a second or so, the fridge shuts down and will not restart (even after hours). I have to unplug it for a minute or so then plug it back in; it runs fine until the next very short power failure. When we are out of town for a few days and that happens, we come home to a fridge of ruined food and a mess. I have contacted Whirlpool (2 times) and they were no help at all. It seems to me a software change could solve the problem, but they are unwilling to listen.

I purchased the Whirlpool Cabrio (wtw6600sw2) about five years ago. Last year, the motherboard had to be replaced. This year, it started to have load balance issues on the spin cycle; in other words, it wont spin without sounding like its going to tear itself apart. It cost $75 to have someone look at it, and to fix it will cost almost $400, and whats next? I spent a lot of money for this machine, and Whirlpools answer was to offer me a discount to purchase a new Whirlpool. I called Whirlpool and my model does not have a recall, but models with same problems have been recalled. I will never buy a Whirlpool again!!!

We bought all whirlpool appliances at our new home 4 months back. Our refrigerator has stopped working from the last month. We had 7 different service team people come in to check and they temporary resolve the issue (taking out a plastic piece from the top of the refrigerator, just re fixing the ice machine, or just walking out of our home doing nothing).Friday someone came and tried fixing it and took about 3 hours. The fridge completely Broke down after that in about 6 hours. Whirlpool customer care wants to send another technician in and want them to have them talk to their technician and maybe after that they can do something. This is the 8th time some technician will be coming home. And clearing these technicians curse whirlpool and dont call them. The customer team at whirlpool suck, there is no damn replacement or repair policy. All scheduling is after a week and whirlpool does not give a **. I really hope this company is sued for the emotional and mental stress and the harassment they cause to their customers. Very frustrated. Have no idea what to do.

Purchased this Whirlpool refrigerator WRT771REYM at Home Depot in June 2014. Within a few months of purchase, had to call for a repair tech because the water line had frozen. Tech unfroze it and told us not to block the air vents to avoid this happening again. The amount of care we have to take to load this fridge so as not to have the water line freeze is ridiculous. Its very picky. For a while, we were still having to unfreeze the line every couple of months. Then it became more and more frequent, to the point where we cant keep it unfrozen for more than a few hours. This seems like shoddy design to me. And of course, the warranty is expired so I am out of luck unless I want to pay for repairs out of pocket.Adding insult to injury, Whirlpool claims that this isnt a common issue. Not true - there are numerous reviews about this very issue on Amazon, Sears, Home Depot, etc. Just try googling the model #. Sad that Whirlpool does not stand behind its products. Yet another American company to stop building quality and rely on planned obsolescence to ensure revenue generation.

I purchased a Whirlpool dishwasher and refrigerator/freezer from Home Depot. Within weeks the stainless steel on both products began rusting. They sent a third party repair service to look at both products and determined that, in fact, the stainless steel was rusting. Our technician said that both the dishwasher panes and the freezer doors would be ordered and replaced the following week. This was on September 4, 2015. After several promised arrival dates, the parts never arrived. I called both the third party repair company and Whirlpool on several occasions only to be told they were on back order. Finally, in late November, the new dishwasher panel arrived and was installed. It is now December 17, 2015 and our freezer door is still on back order. When asked what my options are, the Whirlpool representative simply said we have to wait. I said that because I have been so terribly inconvenienced that they should just come and pick up this piece of junk and replace it with a new one. Evidently, that is not an option. I will NEVER purchase a Whirlpool product again as they do not back their warranty. I now have a $2,000 rusted refrigerator freezer to adorn our beautiful Christmas kitchen. Thanks, Whirlpool. Youve certainly made this a Merry Christmas. (Yes, sarcasm in play.)

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

Our just over 1 year old Whirlpool washer died completely last month (mid May). After calling them and being directed to the extended warranty dept (which we ended up purchasing), a repair guy came out and told us it was our main controller board. Three days later, he returned with the board and nothing. We were then told it was the user interface. They were on backorder until June 5, which means our machine would be out of commission for three weeks. I just received another call informing us the part was now on backorder until June 15. Whirlpool, on what planet is it acceptable for your appliances to be out of commission for six full weeks? Never again.

We have a Whirlpool double oven that is about 3 years old. Today we used the oven for lunch and about 2 hours later we heard a loud sound from the kitchen. When I went to see what had happened I found glass shards all over the kitchen, some as far as 10-12 feet away. The outside glass of the top oven was spider-webbed and had apparently exploded. Nothing had come into contact with the oven and nobody had been in the room with it for over an hour, it just randomly exploded. I am going to contact Whirlpool but judging by the other posts I dont expect much help from them.

My wife and I bought a Whirlpool water heater NU50T121-403, SER# 0733323 as we researched online the best efficient water heater for the money... which was actually more than we budgeted for. We purchased it from LOWES and our Plumber had to return the first heater due to a huge dent on the outside of the body once it was removed from the box. LOWES replaced it, no problem and he installed it. GREAT, HOT water for about six (6) months. Pilot light went out and has continued failing after relighting numerous times! Now we have the four (4) blinks indicating that the Honeywell gas control needs to be replaced only after 27 months of use. Whirlpool offers 12 year warranty on tank & parts, but come to find out, not this part. We were both raised on Whirlpool products and thought we based on our parents successes of various Whirlpool products, we were buying quality brand. We were soon disappointed and will never buy another Whirlpool manufactured Brand again!!

After reading many of the 1,500 +/- complaints about this inferior product, I guess I should consider myself lucky. Ours didnt fail until this past Saturday, March 22, 2014. We purchased this Whirlpool (American Water Heater Company) water heater FG1H4040T3NOV at Lowes, and had it professionally installed, in October 2004, and we have had no issues until this past Saturday when we woke up to no hot water. After checking for the obvious, and finding no apparent cause for the failure, I considered it a fluke and relighted the pilot. The pilot took a few attempts to light, but it lit, and the burners came on.Three days later, we woke to no hot water again. This time, we placed a service call to the company that did the initial install. The technician came out, and after his inspection he informed me that the thermocouple/burner assembly needed to be replaced. He also informed me that this is a well-known issue, and Whirlpool has been sending out free updated replacement parts. He called Whirlpool, only to be told that they are no longer offering free, updated parts. Whirlpool also cited that the water heater was out of warranty (by less than 5 months). He gave me Whirlpools number, so I could contact them myself.As I smelled a rat, I began to do some online research about this issue, and, to my chagrin, I found out that I was far from alone with this issue. As of this writing, 1,500+ consumer and professional complaints, a settled class-action lawsuit, etc., etc. I contacted Whirlpool, explained my situation to the support rep, and, he proceeded to tell me that he couldnt help me with free replacement parts, due to the warranty being expired (less than 5 months). I argued with him, stating that this is not a warranty issue, but is in-fact a design/manufacturing defect issue, that has resulted in a redesign/re-manufacture. I cited the myriad of online data and negative testimonials, and I reminded him about the settled class-action lawsuit on this very topic. He acknowledged all of the above, was unimpressed, and offered to sell me the parts.After 15 minutes of back and forth, I asked to be escalated to the next level. But, of course the supervisor was unavailable, and If Id care to leave my name and number... yeah, right. Bottom line, Im very angry! I paid good money to Lowes for Whirlpools product, with a nine-year warranty. I had it professionally installed, and we have no hot water due to poorly designed parts. And... I am being forced to purchase the redesigned parts. Its truly unsatisfying to be an American consumer these days!

We bought our Whirlpool washer and dryer set through a PX at Fort Hood, Texas. Took it home, plugged it in and... nothing. Called the service desk, and they sent a repairman right away. He replaced the panel and the water intake fuse (I think? It was a fuse that dealt with the water filling) and then we were off and running. I thought, Great! Now I can wash laundry! After about a couple months, the washer would be so stinking loud in the spin cycle, we would plan outside activities ha ha. Fast forward 2 years, the loud sound continues, but Ive not had any problems. Then, Im washing a load of bed sheets, and just happen to walk past the washer while its spinning... I smelled something HOT and BURNING! Sure enough, it was the washer! I hurried and stopped the spin and unplugged the machine. Opened the door to pull out my sheets, and white smoke comes pouring out of the machine. IT NEARLY STARTED A HOUSE FIRE. I was praising God I smelled the problem. Who knows what would have happened. So I call an appliance shop I trust. They send out a guy who tells me I might as well purchase a new machine because the bearing is bad, and the repair is going to cost $600+. Never again, Whirlpool. Never again. You dont endanger my familys safety in exchange for a quick buck on cheap parts. Ridiculous. And, now that I am reading all these reviews on this website about my washer, I am floored. How is there not a class action lawsuit against this company? Mold and fire-hazards are serious infractions, in my opinion.

Water heater model N40t61-343 - Why does a water heater fail after 4 years when there is a warranty for 6 years? Is this water heater an omen for Whirlpool? I have a wife who is terminal and I trusted the Whirlpool name for hot water. What are Whirlpool going to do about this water heater?

We bought our Whirlpool Cabrio 7 years ago and it was great at first. I have not had any trouble with it ripping clothing. The clothes are clean. Its constantly breaking down. First it was the drain pump. Then the main computer board went! I called Whirlpool and of course the lady says its not covered. I had back up though. Google is amazing! I asked why this wasnt a recall as all over the web, people had this same problem. I pushed and pushed and she put me on hold. Came back to say it was in fact covered. What? Really? What changed your mind? She wasnt allowed to tell me. Supposedly had something to do with the date of manufacture. So okay, they send the repair guy out, its fixed. Now tonight, the lid locks and nothing happens! This repair was about 6 months ago. Grrrrr. Its been one thing after another with this hunk of expensive junk. When I buy an appliance I expect it to be problem free for far longer than this. I am not getting a code or anything, just dead air. So frustrating with three kids not being able to do laundry when I need it randomly :( Has anyone else had this problem? The lid locks, then does nothing. I unplugged it, pressed off and restarted it. Changed settings. Nothing is working.

Mold in my dishwasher right after having washed the dishes!! This is the first time I have seen the mold on the racks (lots of it!). However, my neighbor also has a Whirlpool and complains of the mold all the time. Also, my dishes often do not come clean. I would not have purchased a Whirlpool, but it came with the house, three years ago. Therefore, I do not have a receipt for it.

Whirlpool Cabrio Top Load Washer Model: WTW7800XWO purchased at Lowes 8/26/2010. The lid was broken at the hinge in less than a year and was replaced under factory warranty. Lid falls down and pinches fingers. The second lid broke in the same location in less than a year. Lid falls down and strikes the eye. I’m speaking with repair technicians and researching complaints on this product. It appears to be a design defect that is not being addressed by the manufacturer.

Recently bought a 19-cubic ft French Door Whirlpool refrigerator. Seems to work fine at this point, but the compressor/cooling system has a fairly loud swishing noise it makes off and on during the cooling cycle. According to the owners manual, this is normal. If I had known this, I would not have bought this brand. Believe me, it is loud and you can hear it from all parts of my apartment. Also, once you examine the fridge up close, it really is cheaply made. Low-grade plastics for shelves and compartments. And this was not an inexpensive product to buy. We are talking out the door paying $2,000. Sad it is American made. My parents bought a Samsung last year and it is of much higher quality than the Whirlpool I have. But so far, it is keeping the food cold. Just wish it was quiet.

When doing any cooking on this range, there are ALWAYS brown or black marks on the white enamel. When I try to clean it using the methods recommended by Whirlpool, they will not come off and the top looks terrible. Using stronger things to clean it removes the finish. They state its not covered under warranty - I will not ever buy Whirlpool again... EVER! Buyer beware! Model #wfg510s0aw2.

I had purchased this washer from Lowes last September and had problems almost immediately. First of all the lid would lock and hold my clothes hostage till it decided to reopen which could be days. Finally it never opened again. Called customer service and sent someone out. It took almost a month to get it back to running. 1 week for him to show up then 2 more weeks for the part to come in 1 more week for him to grace me with his presence again. Had to call again because the mother board then went. Another month. Now just out of warranty I go to wash and its dead. No lights on nothing. This machine is the biggest pile of garbage and waste of money I ever spent. Barely made it 1 year.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

I bought a new computerized Whirlpool Cabrio top-loading washer and matching dryer 3 years ago. Bearings wore out under warranty, it was repaired. Just outside warranty, washer has broken down twice more. I contacted Whirlpool and received a high level of indifference to my concerns that they manufacture junk, and are not willing to stand behind it. Clearly, this is a faulty issue with the machine and should be repaired then and now at their cost. Do not buy Whirlpool products people.

Purchased Whirlpool washing machine two years ago but transformed into junk within two years. Fraud company only searching ways to loot the money of the innocent customers and manufacturing such appliances which greasing mentally.

We purchased the Whirlpool Cabrio washer a few months ago. When we wash the white cloths using the (white) setting and add bleach and the HE detergent, the washer does not clean the white cloths very good at all. Sometimes the white cloths come out looking worse than they did before they were put in the washer. We called the people at Whirlpool and they said there is nothing they can do as long as all the functions on the washer work the way they’re suppose to. I thought the function of the washer is to clean the clothes but, they say no, as long as everything on the washer is working. That is what their warranty covers.

This washer started out to be good. Its only 5 yrs old. We began to smell an odor. Went to Lowes, spoke with someone in appliance dept. Purchased something for washer. DID NOT WORK. We have tried bleach everything. Our clothes smell. I have skin rashes and I think it is related to mold and mildew. Called the service center. They said could be a sock stuck around the tub area. They need to recall this washer. We spent a lot of money and it has ruined everything. Cannot get the odor out. We cannot afford another one. There is black mold around the rubber lining when you open up the door.

Bought this washer in May of 2019: Whirlpool - Whirlpool - 4.5 Cu. Ft. 37-Cycle High-Efficiency Front-Loading Washer with Steam and Load & Go™ XL Dispenser - Chrome Shadow. Model: WFW6620HC. SKU: 6313774. Paid over $1,000.00 for it. FIRST TIME washing our sheets, we had snags & rips. I immediately called and was referred to Whirlpool and then referred to an outside repair company. They sent a technician out who said everything was functioning properly despite having ruined 3 sets of sheets (these were not all washed at the same time & I didn’t realize they were being snagged until making the beds).I continued to use the washer - clothes were fine, but yet again, MORE sheets and now comforters RUINED!!!! I called YET AGAIN after troubleshooting the problem myself and finding that the drain holes in the drum had metal pieces sticking up causing the items to snag & rip. Another day taken off work to stay home for the repair. The repair guy comes out, the part was broken. So now I’m left once again with a faulty washing machine AND no ETA on when the new part will arrive and be installed AND having to take yet another day off work.7 sheet sets, 3 comforters, multiple shirts, & multiple bathing suits RUINED & was told there was ‘nothing they could do!’ I will NEVER EVER AGAIN purchase anything with the Whirlpool logo. It’s JUNK! Just an FYI, this was initiated in May of 2019 and it is now the middle of September 2019 with no fix updates. Who can go months without doing laundry???? Once again, poor customer service and JUNK of a product!

This morning another chunk of our Whirlpool Microwave handle fell off while I was cooking breakfast. I got on the internet after breakfast and typed in whirlpool microwaves to see if anyone else had experienced problems with their microwave handles and found this site. We purchased a Whirlpool Microwave oven from Lowes in 2011 (over the range model). About two weeks after it was installed, I noticed a crack in the handle. Then a few days after that, a small chunk of glass/plastic fell off of the handle when I shut the microwave door. Since that time, the door handle has been steadily disintegrating. Sometimes chunks of plastic fall off when one shuts the door, even if you are very gentle. Chunks of plastic fall off nearly every time I clean the microwave door, even if I dont touch the handle. Sometimes chunks fall off randomly when Im not even using the microwave. Pieces of plastic have fallen into my cooking pots a few times. Perhaps the steam from the cooking food loosens the cheap glue holding the handle on? What an inferior product! I am very dissatisfied with Whirlpool and will not recommend their products to anyone.

Four years ago, my wife and I also purchased a Whirlpool washer and dryer set, washer model no. WTW6600SB2. Within the first year we had to replace both pumps twice, user interface, and control board. (I think that’s what it was called). Of course, that was all covered under warranty. But I to had to wait a week for the part and then another week for the repairman to make it. The user interface and control board had to be replaced because moisture got into the control panel and caused corrosion on the circuit boards which caused them to short out. Then it wasn’t long after warranty ran out, the whole wash tub and drum just dropped to the floor with a full load in it. I don’t remember exactly what was the cause of it, but I do remember it cost me $580 to fix it. Then it wasnt more than two weeks later, the repairman had to come again and replace the control board again. There went another $600 for the parts, labor and service call because this time they had to come from 40 miles away and it’s a minimum fee of $89 just for them to drive up here and another $60 for diagnostics, and then the part and their time to install new board. I paid for this machine twice in the first year and a half. Then after all of that, it was finally working like it should and worked great for about 6 months, then came the UL,LD, and Lid Lock codes over and over unplug, plug in, unplug, plug in. That lasted for about a month, and then all of a sudden, it straightened out. And we only got the occasional UL code. Now in the last year, I have had to replace the drain pump twice and then the drum and motor dropped on the shaft allowing any loose change or other items if accidentally missed during pocket searches to fall into the outer wash tub and get sucked into the drain pump and causing a quarter to be shoot through the drain pump making a hole and caused my laundry room to flood. Well, I decided I wasn’t going to buy another part so I used a plastic repair kit to fix the hole and got it up and running. A week later, the washer won’t wash. It will fill and that’s it. So upon my own diagnostic, I came to the conclusion that it was the user interface that went out due to corrosion I found on it. So for another $120 I can fix it, but I’m not sticking another dime into the washer, nor will I ever buy another Whirlpool appliance. Once all of my Whirlpool appliances die, I will replace them one at a time with LG. I to contacted Whirlpool about my problems and all they did for me was send me an extended warranty offer for 50% off, really that’s it, that’s all I get is a big GFY after all the money I have stuck into this piece of scrap-metal. Well, never again will you have my business as long as I live. Whirlpool, you need to take your hoo-ya and do something about all of these complaints.

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

The oven works well. My complaint is that the glass door is very difficult to clean. Some kind of liquid got in between the panels and I cannot clean the glass without removing the oven door. Im afraid to remove the door as I may not be able to get it back on the oven. I have dirty glass I cant clean and that makes me unhappy. Otherwise the oven works just fine.

We bought a new Whirlpool refrigerator about three years ago. Because of space, we had to purchase one with a top freezer and also with no ice maker. First of all we didnt realize it was much deeper than our old Kenmore so it stuck out further into the kitchen space. That was not that big of an issue. At first everything ran great including the top freezer compartment, or so we thought. Then we noticed that when we had ice cream in the freezer and put water in ice cube trays to freeze, the ice cream would get very very soft. This continued to the point that now anytime I put water in there to freeze ice cubes I have to turn up the temperature to keep the ice cream frozen. Once the ice cubes are froze, there is no problem, but they take at least six hours to freeze. Then one day when a young child slammed the refrigerator door closed, the freezer door popped open about an eighth of an inch and then closed again. So, I tried it. Anytime you close the refrigerator door a little too hard the freezer door pops open. I then tried the dollar bill test to check the strength of the seal. The bill pulled right out of the door with very little effort. So, is the problem bad seals, bad design, or bad quality control, or what. How can I be assured that the frozen foods in the freezer are being frozen as solid as they should be. I know they dont freeze solid enough in the freezer door. I will eventually dump this refrigerator and go get another Frigidaire. If we have to get one with a bottom freezer, we will just have to rearrange our kitchen to accommodate it. But, having to turn the temp up and down every day is ridiculous. I have had issues with food close to the walls in all refrigerators slightly freeze, but never had an issue with keeping things cold enough. I will never buy another Whirlpool refrigerator, stove, or anything else for that matter. I have always had good luck with Frigidaire, so I will stick with what I know works.

7 months ago we had a Whirlpool dishwasher installed into our home. While away on vacation the piece inside malfunctioned and caused major damage as water filled the home. Whirlpool claims, that because it’s a part that they contract out to another company, they “Whirlpool” are not responsible! If you purchase a product from Whirlpool and they put their name on that product, then Whirlpool should stand by its product. Well... beware, you’re not going to compensate from Whirlpool! We urge you, make sure of whom the parts of the product your buying from belong to, before you buy it FIRST! Never again!

I have a Whirlpool top-loading washing machine model 3LA5580XSW3. The timer switch is not working and I have been told that spares are not available. Is this true? Everything else works well. Please advise as I really need a new timer.

Our $2000+ Whirlpool Gold just had the control board fail. After calling Whirlpool, local services and all national parts suppliers we were told each time the part is on back order until June. If this is Whirlpools way of generating new fridge sales, it does not work. No Whirlpool, Kenmore, Frigidaire or KitchenAid, all made by the same company will ever enter my home. The control board runs the fridge. Which executive thinks a family can live without a fridge for 4 months? What terrible service. GE always has parts and service. Go with GE everyone.

Two-year old Whirlpool Cabrio top load washer; absolute piece of junk! Bearing on the drum howls like a train. Now the master board or some other sensor (under drum) is out. Serviced for the third time and the service repairman states its cheaper to replace than to repair. For a 2 person household, it is reasonable for us to expect more than 2 years from a washing machine. Same experience with Whirlpool 15 years ago. 1st time shame on you; second time shame on me.

We bought a Whirlpool model WFW5620HW front-load washer at Lowes. The unit shook so violently during part of the spin cycle that the Whirlpool-authorized service company technician said not to use it while parts were ordered. It seems the balance ring was not functioning. Parts ordered were shocks and tub assembly. The technician suggested trying to get a whole new unit, as the repair is so intensive he had only done one or two in his career.Whirlpool customer service said they would not replace the unit, and an escalated request had the same response. I think this is terrible customer service - when there is such intensive failure in the unit, they should provide a brand new machine. The work has not yet been done - we are without use of a washer for an unknown period of time, since the order of a tub assembly is so uncommon that they do not have a time estimate. Needless to say, we will never buy Whirlpool again, and suggest you do the same.

I have a Whirlpool Washer Duet 4.3 cu.ft. On 24/3/2011. It has lasted only 5 months. Now, the spinner makes a loud noise. On 29/9/2011, Whirlpool sent a service man out and he replaced the bearings. But the washer is no longer the same and it is still loud. I will not buy Whirlpool again.

I bought new and both have broken over and over. The oven takes forever to heat up. The fridges ice maker broke and then the defroster in the fridge side broke. Dont buy Whirlpool.

The machine cleans clothes okay but constantly gets out of balance and sometimes it take all day to complete an entire cycle. It is very frustrating to rearrange clothes, restart the washer, and then wonder how many times it is going to take. It is especially time consuming to wash a large item like a bedspread, not to mention the waste of water. I can expect to reset at least 3 times. The machine is less than a year old. I think it is a design flaw or else I just have a lemon.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

I purchased a front loader Whirlpool Cabrio washer/dryer in June of 2011. I was sold an extended warranty which ends June 30 of this year. I have made 4 calls to the Co which warranties the washer because it is making squeaking noises on the spin cycle. I was refused service because the customer service rep didnt “hear” anything. I finally had a local service Co check out the machine and was told the motor needs to be replaced and if under warranty I should demand it be replaced. I called again and still cannot get NSI to come out and see the problem.

I bought the french door refrigerator Sept 2014. Recently the change filter light came on so I bought the filter. I read the instructions and then when I went to install it, the filter door would only open about 10%. I called Whirlpool and explained it was obviously a manufacturing error. They didnt care. Out of warranty. Everyone can make a mistake but when you wont own up to it and take care of it, that defines your character or lack of it. I think I will video the whole thing and put it on YouTube.