I bought a Whirlpool WFW9470 Front Loader Washing Machine 11 months ago. The washer appears to complete a wash cycle but leaves the washing wet and with no error message or light. Whirlpool says the machine is not designed for light loads. The technician says washing on a light load will damage the bearing. We had the spin bearing replaced after 8 months. But still, the washing remains wet and the bearing wears out prematurely.

We purchased a WRS576FIDM refrigerator from HHGregg in August 2015 and immediately had problems with ice maker and door having condensation on it. I contacted Whirlpool who had a tech come to my house and verify problems. Whirlpool replaced it with a new refrigerator in November 2015 and w/in a week it had awful condensation on the outside of the door, dripping onto the floor and pooling water. A tech responded to our house again and confirmed the problem with Whirlpool. Whirlpool advised they would be sending out two new doors for our side to side refrigerator and said we should receive them within 4 to 6 weeks from late November 2015. I asked Whirlpool to send us a different model because this is the second refrigerator of the same model that has the same issues. Whirlpool refused. I have spent countless hours on the phone with Whirlpool, HHGregg, and waiting for service appointments and my patience is getting thin. I just contacted them today 2-9-16 to inquire about my doors since it has been well over the 4 to 6 weeks Whirlpool said it should take to receive them. The Whirlpool rep on the phone had no information about the status of the doors and said that they would have to contact the service company to inquire more about the status of the doors. He also said that under special circumstances, it may take an additional two weeks for certain door orders. I once again requested a different model of refrigerator or a refund.I tried to get HHGregg to allow me to return the 2nd refrigerator just days after I received it since I was having the same issues as the original one I purchased. HHGregg said they could not since the 2nd refrigerator did not come from them. HHGregg said that they did not know why Whirlpool sent me a replacement refrigerator directly and added that normally the returns go through them. I feel like I tried to do the right thing by contacting Whirlpool for warranty work, but I feel that if I would have called HHGregg I would have been able to get a different brand refrigerator which is what I really desire after all these problems with the Whirlpool brand. I did purchase an entire Whirlpool kitchen set from HHGregg. The only problems I am having is with this refrigerator.

Purchased this French door fridge with the freezer on the bottom in September 2017. Started having problems shortly after with the freezer not auto defrosting/ice damming on the evaporator unit in the freezer unit, which caused the fridge to warm up and food to spoil. Service came out several times and ultimately replaced the Jazz board 3 times, 2 harnesses in freezer, 1 Heater and the evaporator fan motor, with the same problem happening after a few weeks. Requested a replacement after the 3rd visit, but Whirlpool refused to back up their product. Sent service a few more times to no avail. Demanded a replacement once again. They sent a new service company out 15 months after our original purchase and they FINALLY deemed it non-repairable and are FINALLY going to replace it (turned out to be a broken wire inside the walls of the fridge, likely was like that upon delivery). So now we will have been put out for a total of 16 months for a fridge that cost >$1000. If Im spending that on an appliance I expect it to work properly or else be fixed/replaced in a TIMELY fashion. And the best part: they refuse to compensate us for any of the food that was lost due to a faulty product and very poor customer service! That was a lot of money lost because of their incompetence. If they had just replaced the broken appliance in the first place I would have been satisfied. But since they refused to do anything beneficial to remedy the situation, I will NEVER buy another Whirlpool appliance again. And add in the inconvenience of scheduling a time to be home for multiple visits to greet the repairman. Oh yeah, plus our time wasted defrosting our frost-free fridge with a blow dryer to buy us time until it got repaired. Buyer beware!

I dont know how anybody could write a good review on this machine. It always requires deep water wash and sometimes two cycles to get clothes clean. On regular cycle, it doesnt get water on all clothes. Oh yes, it does save water... Ive pulled things out with dry areas on them.

I have bought and used other dishwashers (different brands). They lacked quality, quiet operation and efficiently and effectively cleaning dishes, pots and silverware! My Whirlpool dishwasher is far better than all of them. It cleans and makes my dishes sparkle. I would not buy anything but Whirlpool in the future.

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

I bought a Whirlpool Cabrio washing and dryer in 2011. I have replaced the lid on the washer 3 times. It comes apart in the back of the lid and it will not lock in place so it will perform. I have called the manufacturer several times. They have not been of help as to why this happened. Im upset. They have no suggestions. I have owned Whirlpool appliances for years and this is the 1st time this has happened with no resolution. I just want it fix or explain why its happening.

I bought my new Whirlpool Duet washer and dryer in November 2011. Washer was loud from day one, but I never owned a front loader and thought that is how it was. Then someone told me that meant the bearings were bad, so I called. While still under warranty, they did replace; and I had to wait 6 weeks. Then a few months later, it started leaking. I had the extended warranty, and A & E came out and told me the bearings failed again. And now, I get a check for $750. But the machine cost more than that. Do not buy any Whirlpool, Maytag, or Kenmore. They are all made by Whirlpool.

Greetings: I purchased a Whirlpool refrigerator on July 3, 2014. And the supports for the door to open and closed have grinded and worn out - not allowing the door to close properly, requiring being lifted up, and pushed close as much as possible. Not the quality I expected with the purchase of a Whirlpool product. I want this door repaired or replaced at the expense of Whirlpool. Having paid over $600.00 for the product, I didnt expect no problems like this at all, poor design. The weight of the door is too heavy to support a hinge mount in plastic, its ridiculous. Now cooling is being wasted, runs constantly, and just not the quality I expected nor received.

Had them come out numerous times and last guy changed out entire motherboard to no avail. Freezer side freezes and then thaws. Now it is just a two sided refrigerator. Before Thanksgiving I was promised new refrigerator and none arrive after phone calls. No refrigerator for thanksgiving. None for Christmas. Finally today at 7:00 this evening January 17 2020 it arrives. I am suppose to be in bed. I have two terminal illnesses. I moved out boxes of stuff out of refrigerator. Installer came in and said I had to move stuff on the porch that they are not allowed to. I get all done, finally sit down and he comes in and says there’s a big ding in bottom of refrigerator. No idea when another refrigerator would come. Who is going to put all my furniture back? Who is going to put my food back in my refrigerator. I bought the entire Whirlpool package Made In America. I should have went cheaper and bought from China. Now there’s trouble with dishwasher and they have been out once already for that. I could worry about taking care of my health if I didn’t spend all my time dealing with whirlpool. Maybe they can bury me in the refrigerator and my daughter won’t have to buy a coffin. I make 1000 a month on disability and get 16 dollars in food stamps. I have thrown 1000s of dollars away after motherboard was fixed. I went and my friend helped and bought new groceries. One day took out a frozen burrito and as I was putting it in microwave I noticed it had mold all over it. Another food dump. Whirlpool pool answering phone says whirlpool cares. Well they don’t care about me.

I purchased a Whirlpool Water Heater Model # ND50T122-403 on March 4, 2011 from Lowes. I had it installed by Lowes and it included a 12 YEAR Manufacturers (WHIRLPOOL) WARRANTY, plus I purchased an additional 11 YEAR EPP (Extended Protection Plan) WARRANTY. About 3 weeks ago I had no hot water so I went down to my basement to check the water heater and it displayed 7 single blinks followed by a 3 second pause, which is a flammable vapor sensor lock-out code. I made sure there was no flammable vapor in the area, turned off the gas and pulled out the plug then called Lowes since I have an active warranty with them. They said I had to wait 3 business days for them to call back to set-up an appointment to have it repaired. I waited 3 business days including the weekend and no one called me back by the end of the 3 business days, so I called Lowes back and they set-up an appointment for a video store owner with a plumbing license to come over and try to fix it. Finally I thought I would have hot water after over 2 weeks without it, but the plumber started taking it apart and about an hour later said he needed to order a part and he would be back another day when he gets the part. He came back 2 days later to install the part and fix it, but he could not fix it. He called Whirlpool to report the issue and Whirlpool told him they would not honor the warranty because my basement was not safe. He then told me he would call Lowes to let them know about Whirlpools position and call me back. So when he called me back he said Lowes said the current warranty was under Whirlpool and their warranty was only effective after the initial 12 year manufacturers warranty was up, so they would not help any further. So after only 4 1/2 years with a 12 year manufacturers warranty and an additional 11 year extended protection warranty that I purchased from Lowes, Whirlpool will not honor the warranty that came with this water heater. I am going to take this to small claims court. Whirlpool and Lowes have terrible customer service policies. I will NEVER purchase another Whirlpool product and I will NEVER again shop at Lowes. Please do NOT EVER buy a Whirlpool water heater! TAKE YOUR CLAIM TO SMALL CLAIMS COURT FOR SATISFACTION! Maybe an attorney will put in another class action suit against Whirlpool and/or Lowes.

I brought a Whirlpool refrigerator on 2/15/2020, French doors. Bottom freezer. I have had issues with the bottom freezer from day 1!! Ive had gaps in the gasket seal and air was coming from the freezer. This happened 3x. Now there is a build up of frost and ice. STAY AWAY!! Ive never had any issues with Whirlpool until I purchased this updated refrigerator. I should have stuck with my regular top freezer refrigerator. No issues!!

Long story short, we replaced a very old Whirlpool water heater with a new one a couple of years ago... We have had nothing but trouble. First, pilot light wouldnt stay lit. Found out that it was defective.... Whirlpool DID offer a no cost conversion kit. Had to pay shipping and installation costs. Have had the plumber out four more times to try to ANYTHING to keep it lit.... No luck. He even spoke to a Whirlpool tech on the phone and followed his advice. I have filed an online complaint with Whirlpool and the site stated that I would hear back within three working days. Guess what.... no reply. I have four other Whirlpool appliances that I love, BUT as they wear out, I will NOT consider Whirlpool.

Whirlpool washer Model WGD4815EW1. Bought this washer just about 4 months ago and right away I hated it but was told by people that all the machines had gone to the lid lock and that the government had mandated the energy saving devices on the machines so the machine will only put just a little water in the machine. I have been VERY VERY unhappy with this machine. My husband figured out a way to bypass the lid lock mechanism. Then after washing clothes many times I found out in order to get my clothes clean I had to just set the dial to Bulky every time OR I had to wash the clothes 2 times to get clean if I didnt. Once we bypassed the lid lock and then I figured out where to put the knob so the clothes would come clean I was fine until last week the machine just would NOT wash or do anything... it filled with water and just sat there until my husband got the water out. I located a Speed Queen from an appliance store and I am much happier. It does not have the CRAZY lid lock on it. I realize that some children are apt to mess with the washers. But I dont have children anymore and when I did I had a laundry room with a lock up high on the door so they could not play in the laundry room. I dont understand why this so called mandate could not have been done in a way as to allow those with kids to have the option on the machine with a built in code device to set the machine so the lid will lock and those of us without children in the house to opt out of the code to set the lid lock. NO REASON why we cant have a CHOICE. As far as I see it is a way for the government to try control more where they need to keep out. The cars have been designed with safety locks for children to keep them safe, but it is up to you to choose to use them. Same principle! Now for the mechanism to make it so the machine will only put so much water in the machine to wash. Youre NOT SAVING any ENERGY or WATER if you have to wash the loads twice!! This whole mandated business with the newer washer machines is a huge JOKE on everyone. I will be searching out used machines and having them rebuilt because I dont EVER plan on buying another one of these newer machines. If enough people stop buying them the manufacturing companies can raise some cane with the government to get the mandate lifted. NO I will not buy another Whirlpool washer. I encourage some of you out there who LOVE a challenge to figure a way to change the stupid motherboards on the newer machines and create a great business for yourself because if someone else can create it you can recreate it.

First of all, I did not want to give a rating of one. Your system forced me to. They do not even rate one star.In summary of the below, I did not fail to communicate from the moment we received our appliance and Whirlpool in short intentionally wasted time to let the warranty run out to avoid replacing a lemon of a dryer. Please read details below.We bought our new dryer (model WED9400SZ) on 10/24/10 with a one year service & parts warranty from Appliance Smart in Apple Valley, MN. In March 2010, we called in to Whirlpool customer service to relay our issues & to arrange for service & repair after a few months of noticing holes in our clothing (at first thinking it was the new Whirlpool washer making the holes).Although we purchased the unit in late October, we didnt use it for the first time until late November (1 month later) as we just bought our home & took four weeks to paint the entire home before moving in. Then on December 29, 2010, we left for a three week vacation to Mexico & again hadnt used the dryer during that time. Returning home, we started to use the new washer & dryer (in late January 2011) but had thought it was perhaps the washer making the holes & it took us until to March for Whirlpools preferred service repair providers to determine that the holes were coming from the dryer. I do not have a reference number to refer to for the complaints to Whirlpool as I was not provided one.They only always asked for our delivery address which is: xxxxx ****, Lakeville, MN.The issue of the dryer making noticeable holes in our clothing and in one instance chopped a sock completely in half (both pieces found within the dryer drum not stuck behind the drum or sucked into another area of the dryer) has been consistently ongoing and to date has not been fixed. On several occasions, I expressed my concern to Whirlpool customer service as well as to managers (because the case had been elevated to where they had managers and review boards looking at the problem more closely) as we were getting closer and closer to the warranty expiration and the dryer had not been fixed. Routinely, I was told that regardless of the warranty expiring, if its the same issue that persists and had not been resolved while within the warranty date, they would continue to honor the warranty by continuing to try to fix the problem or replace the unit at no additional cost to me if necessary.Whirlpool had escalated this repair issue (multiple times) to their review board and determined that the dryer was indeed repairable and continued to send out Twin City Appliance to repair it. Finally, just 23 days out of warranty, Whirlpool deemed the dryer should be replaced, but at the cost of a new machine $370 to us (which they somehow prorated to get that figure). We paid $399.98 plus tax for our supposedly new dryer so clearly this is an unexcitable resolution. In speaking to Rhonda this morning, she further prorated the new dryer replacement cost to $260 to include installation and another one year warranty and gave us until December 21, 2011 to take advantage of.This product never worked from day one (a lemon) and has caused roughly $400 in damage to our clothing (all photographed for proof). This has further resulted in me missing work to let in repairmen & and taking great amount of time to lay out out wet clothing around our house to air dry (again, all photographed. ) This has caused extreme stress for me in spending hours and hours on the phone with Whirlpool and repair people (cell phone records of dates & conversation length as proof). I have also developed great anxiety attacks in using our dryer, scared at the outcome of which of our clothing will be ruined. After having two different service repair companies (A&E Factory Service and Twin City Appliance, both in MN) at Whirlpools insistence come to our home on more than 10 occasions within the year warranty to determine the cause & try and repair the faulty machine, this proposed resolution by Whirlpool is absolutely unacceptable. It is important to me as a consumer the this issue is formally filed with a reputable institution (BBB). I feel we have no choice at this point but to contact our lawyer and take this issue up in the courts. Resolution proposed:I am seeking a replacement of our dryer at the equivalent or greater value than the model we purchased and a letter of apology from the CEO or equivalent position in their corporation as I want to know that this poor level of customer service provided by their company was indeed brought to their attention. I am also asking for $400 to replace our damaged clothing. When this goes to court if not resolved via the BBB, I will ask for pain and suffering damages as well.This has been an unbearable chapter for our family this year, one that has weighed heavy on us and caused great stress, anxiety and loss of money and time. I am in shock that a worldwide corporation with the longevity and commercial history and quality service that Whirlpool was known for cannot admit that this lemon we purchased is a (most likely) rare instance and step up to the plate and demonstrate integrity and show value for their customers by doing the right thing. Time after time their customer service reps promised I had nothing to worry about and that if the machine could not be fixed even if it fell out of warranty, they would take care of the replacement of fixing it at no additional cost to me.

Only problem is you have to open door to access functions. 30 second increments and stop are on outside. Beautiful to look at and inside is easy to clean. 4 fan levels, vent inside or outside. 2 light settings. Nice and bright. Low profile over stove but big enough to hold large casseroles.

We bought our Duet washer in 2007 with a three-year warranty. In 2010, the washer started banging so we called it in for repair. It was determined that the bearing on the drum was bad, so the entire drum assembly was replaced because the poor design of integrating the bearing into the drum. Almost one year to the day, our washer started banging again. The washer is no longer under warranty. We were told the parts are around $400 plus and another $400 for labor.The repairman was from the store we bought the washer and he is a certified Whirlpool repairman. He related to us that this is a very common occurrence for Whirlpool washers because they are using cheap foreign made bearings. He services this problem on a weekly basis and Whirlpool will not do a recall because unless it is a safety hazard, it is not a concern to them if consumers have to pay out the nose for cheaply made parts. This repairman informed us that during training at a Whirlpool class, he learned that on the main board of the washers, they could put a 2 cent lamp that would indicate a bad board which would simplify diagnosis, expedite repair and reduce service time, but Whirlpool wont do it because it isnt cost effective. The repairman told us that we can call customer service until we are blue in the face, but Whirlpool wont give a ** because it is out of warranty. He sees this happen all the time with Whirlpool. My wife called Whirlpool Customer Service just to be told we are ** even though the cheap, crappy bearing that went bad was done under warranty, a year earlier.Well Whirlpool, I guess you lost another customer who will make sure that you lose a lot more customers. We are going to take our business elsewhere and we will make sure all our family, friends, neighbors and coworkers know how bad your customer service and poor attitude is toward consumers. If you cant back your products when you put cheap foreign garbage parts in your product, then you need to lose business and get out of the market.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

After the second year, everything stated to fail. The pump, the main control, even the mounting straps all failed. We are very glad we got the extended warranty. Parts alone have exceeded $400.00. Right now we are dealing with the loads not drying.

If I could give no stars I would. I own the Whirlpool Cabrio, which I bought only 2 years ago. Im on my 3rd service call. They replaced my board after only 1 year of owning it and now 2years later its the same error message (F6E2), the board again. Besides this problem the machine is horrible! Every load has to be done on the deep water mode or else your clothes will come out with dry areas. Forget about darks - they come out with lint and soap residue all over them. So for darks you have to use extra rinse cycle but still the clothes come out with lint all over them. Laundry has turned into a nightmare for me. And the clothes arent clean. If I dont spray and scrub any stains, the clothes come out with the stain still on them. Dirty white socks come out dirty, even with bleachI dont use warm water on my clothes because it shrinks them and I dont put all of my clothes in the dryer because it shrinks them. So I am constantly using lint rolls, like crazy on all my darks. And even though the machine is very large I was told to never put a lot of laundry in it because nothing will get clean. So now I have to do more loads of wash. Doing laundry has turned into a job, a horrible job that takes hours. So now I have to use deep water, extra rinse and smaller loads so how is this energy efficient - its NOT, its the opposite of efficient. I am doing more wash and using more water. I use liquid HE detergent like they said. I clean my washer when it lights up to clean it. I dont know what else to do. I just called whirlpool about all of this and my second board being broke within 2 yrs and they dont stand by their products. I have to just keep getting it fixed through my extended warranty company. Thank goodness I bought an extended warranty.I would never ever buy anything whirlpool again! Dont buy this washer if its still available, it is the worst. Even if cabrio isnt available (which I dont see on their site) I still wouldnt buy whirlpool. They should replace my machine with a different one at this point. Not that I want another whirlpool but at least I would have a machine that works. This machine completely stopped working after the error code so I have no machine for 4 days now. I waiting for my extended warranty to get back to me and then I have to make an appointment for the appliance company to come and fix it. This is crazy. All these days and I cant do laundry. This is not acceptable!

My Duet Sport washer drum is damaged due to the poor quality of the bearings. I replaced the Whirlpool Duet Front Loader Washer Bearing & Seal Kit W10253866, W10253856 but because the bearings were damaged the drum is also damaged. When I opened the rear panel of the washer the bearings had literally come apart and bearings fell out. All of the floor and the oil/grease was everywhere. I replaced the bearings but it didnt matter because the drum is warped. Priced the drum and it is nearly $400.00 to replace the assembly. The cost of the drum assembly is about half the cost of a new washer. I will never buy another Whirlpool product again. Just a shame that the cost of a replacement drum is so high. What caused the bearings to just explode and damage the drum. What did I do to cause this? Absolutely nothing. I have since discovered that this is has happened to scores of people with this same washer.

Water heater model N40t61-343 - Why does a water heater fail after 4 years when there is a warranty for 6 years? Is this water heater an omen for Whirlpool? I have a wife who is terminal and I trusted the Whirlpool name for hot water. What are Whirlpool going to do about this water heater?

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

We ordered the Whirlpool 6.4 CuFt Electric Slide-in Range WEE745HOFS from Costco on 1/3/2017. It was delivered 2 weeks later. The FIRST time we turned on the oven the top heating element caught fire during the preheat and damaged the interior of the oven! The interior paint was completely burned off above the fire, exposing the raw metal. Costco called Whirlpool for us to ask for a replacement oven. Whirlpool refused. We called too. Whirlpool sent out a repairman who replaced the element and PAINTED the damage on the top of the interior.For weeks, every time we turned on the oven, the house filled with smokey paint fumes. I have a chronic lung disease (sarcoidosis) so the paint fumes were a serious problem. We stopped using the oven. Weve hardly used the oven since that time because we have a nice, large countertop oven. I turned on the Whirlpool oven again in January of 2018. The top element burned out AGAIN after less than a dozen uses! I was 2-3 days past the purchase date and again Costco tried to advocate for us but Whirlpool refused to help in any way.My next door neighbor purchased this exact oven two months before we did and she has had the SAME problems (and worse!) with NO help from Whirlpool! I have HATED this oven even though we mostly use the cooktop. A $1300 oven should NOT burn up an element in less than a dozen uses! The cooktop is very difficult to clean, scratches and stains easily. The trim and panel also scratch very easily. Yes, I did purchase the Whirlpool cleaning kit and follow all directions carefully. My next door neighbor says dont bother trying the Whirlpool Aqualift cleaning feature because it DOESNT WORK! She hates this oven too. By the way, ALL of my appliances are new Whirlpool appliances! So far the dishwasher is doing ok but the microwave is 4 months old and the door is not closing completely, so it has to be adjusted often or it clicks rather than cooking. VERY DISAPPOINTED IN WHIRLPOOL!

I was so excited when my husband bought me this as a gift this past year as we are a family of 6 which means lots of laundry. The first few months I assumed it was operator error trying to learn how the new one worked. Well here we are months later googling why it makes my clothes dirtier coming out than they were going. It leaves black linty looking streaks on all my white clothes, both inside and out and leaves white linty looking streaks on my darks, also both inside and outside. It DOES NOT REMOVE PET HAIR AT ALL! If you purchase one, and have long haired pets that shed, expect to invest in some lint remover. Im on my third type in an attempt to save me time. I will say OxiClean laundry detergent seems to be the only detergent that actually cleaned the clothes. Sadly, stores around here stopped selling.And whatever you do, DO NOT USE LAUNDRY PODS. It DOES NOT DISSOLVE THE HOUSING AND LEAVES SLIMY RESIDUE ALL OVER YOUR CLOTHES. I believe this is due to the fact that despite the setting, it uses little no hot water. Which would be great if it actually cleaned your clothes. I could run my clothes under a faucet with no soap and they would cleaner than this pos. Bottom line. Dont waste your money and if you do keep your expectations very low!

I had sold appliance for ten years. I purchase a Whirlpool Cabrio 2010. After two years started rusting. It is rusting on the outside and now on the inside, that I cannot wash delicates or whites. I so disappointed. I had lots of confidence in Whirlpool. The model is wtw7300xwo... I call talk to whirlpool but got no help. Now I going to need to purchase a new washer. It will not be a Whirlpool.

I purchased a Whirlpool microwave oven from American Furniture/TV in Fenton, Missouri on 11-13-2010. It had a Whirlpool 1 year warranty and a Performance Guarantee for five years. I noticed recently that the plastic on the door had hairline cracks near the handle and now is beginning to crack around the glass on the front door. I called American when I noticed the cracks by the handle and was told that it was cosmetic and not covered. Now the cracks around the glass may be a bigger problem if they let fumes out from the microwave. I am waiting for a second answer from American. I feel like the problem is with the plastic itself.

This range is easy to clean, easy to use, multi functional burners, easy to use oven and very nice looking. We use propane instead of natural gas and the conversion was quick and efficient. We absolutely love the griddle.

A top loading washing machine with an agitator in my opinion, gets my clothes 100xs cleaner than one without. Ive owned front loaders and top without agitators. Never again. Top with agitator is my personal preference from now on. Also Whirlpool has never failed me unlike other brands.

We purchased a whirlpool gas dryer 30 years ago this past February. Its still going strong with 30 years of continuous use!! The only service ever required was a belt change I did myself 18 years ago. Not too bad whirlpool!!

I purchased the Whirlpool Cabrio with the touch panel and top loader. The absolute worst. The machine leaves white marks all over dark clothes even when the extra rinse feature is used. Ive tried multiple detergents, skipping fabric softener completely, using very little detergent, and even tried different water temperatures. Nothing works. And should one have to go through such extremes to not have white streaks left on dark clothes? Absolutely not especially for the money spent.The machine wrinkles clothes like I have never see before. The dryer usually gets them out but not always. They are mangled after washing. Using the first or second spin speed helps reduce some but they are wetter going into the dryer that way. If I wash bed clothes, the tight fitting sheet that fits snugly around the mattress must be washed alone. If not, all the other items end up encased in it as if youve intentionally packed it that way to carry everything around. This leaves everything absolutely soaked. I have also had shirts come out with dry spots on them. How does a piece of clothing come out of a washer with more than one dry spot on it? And no I did not over pack the machine.I have had no problems with the dryer. It does its job so no complaints on that. I would not recommend the Whirlpool Cabrio to my worst enemy. Complete waste of time, money, and water!!! Very disappointed and will never buy from this company again and will prevent anyone else from doing so the rest of my life. Did the company do zero testing on this machine before selling it? Because I see a lot of repetitive reviews. Or the company was well aware and did not care and just wanted to make money? Either way is unacceptable. Garbage!!!

I am following up on a review I submitted on April 22, 2015 about a Whirlpool refrigerator with french doors and bottom refrigerator. At the time, paint was falling off from the door as pictured in the previous review. This another chapter on this story and probably the closing chapter. A few months after the paint event which I could have lived for a while, the right door hinge literally disintegrated leaving the door without support. The door seals material is of such poor quality that they have disintegrated and the water condenses inside. The bottom photo shows hinge components that came off the door hinge on the kitchen floor. The second photo from the bottom up photo shows how the door scraped the plastic of the freezer door top trim if the door is not lifted to clear it. The second photo from top to bottom shows the door over the hinge pin if I am not careful lifting the door to clear the freezer door.The first photo from top to bottom shows how the door remains open if not lifted so that the door magnetic seal keeps it in place. It is very hard for me to believe that a country like the United States of America treats its customers with no respect. I met my obligation to pay the amount on the price tag of this appliance but I cannot say that Whirlpool did its part of providing a basic quality product. There is no consumer protection agency in this country to protect consumers from corporate predators that have no sense of a fair deal with a customer. So here we are, being abused by United Corporations of America. I hope the future brings a different understanding of the american people on these matters. Thank you for the opportunity to express myself on this matter. Next step... buy a foreign made appliance that will support another country work force... sounds familiar.

Within 5 months my 850$ dishwasher broke. 2 months to repair and 15 plus hours on the phone. Warranty is cryptic. You must allow them 30 business days from when they order parts. Buy Bosch, wish I did!

I purchased a range top from Lowes and a month and half my burners go out. I call Whirlpool and a service technician came out. Said that he cant repair the stove because a bug had burned out the burners and he cant repair the stove. I call Whirlpool and they told me that voids my warranty with them even though my stove is not even two months old that will not repair it and I will have to pay for it to be repaired. I asked Lowes and they told me that they only take back big appliances back before 30 days. Now I am stuck with a stove that I paid 700.00 for that does not work and I have 4 children to feed. I am sickened on how Whirlpool can do this to a hard working family that just wants a good stove. I hope this helps another hard working family. Do your research before buying from Whirlpool. I wish I would have.

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

In 2009 I bought 2 (yes 2) machines (one was for our daughter). I also took out 5 year warranties on both (good job I did). Within the first month on our machine the paddles flew off and after a bit of a debate with the insurers we had another machine (same model). Within a short period from date of purchase both machines had a number of faults - circuit boards, weights that came loose! and bearings going. There are other bits but too extensive to list. To be fair to the insurers they were no trouble (it really is the inconvenience of being without a washer and having to schedule time to get it sorted out). I will never ever buy a Whirlpool as all of these (3 in total) have been a nightmare and ours is sounding noisy again (it only had a new drum 12 months ago for bearings - yes you need a new drum for that £200 in all!!) so I am really glad that we have the insurance. When that runs out and the machine is dead (whichever comes first) I think we will will be buying either a Beko or a Samsung that are getting really high ratings. Anyone reading this might wonder why did we buy these in the first place. Well a colleague of mine at work had one and said it was fantastic (she had children so used hers a lot) hence me buying them (and they were not cheap by any means, so thought we were getting a cracking pair of machines....cracking, yes they might as well be as a chocolate fireguard has more reliability...WARNING DO NOT BUY A WHIRLPOOL WASHING MACHINE - IT COULD DAMAGE YOUR SANITY! AND FAITH IN HUMAN BEINGS TOO!!!!!

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

Whirlpool washing machine M# wtw7340xw2 / S# c14270996 - Bought in 11/26/2012. Never was real satisfied with the way the clothes were washed. They never came out real clean and smelled like there was still soap in the clothes. It has been less than two years and now it will not run. Turn the unit on and all it wants to do is turn on the pump to drain the tub. Im a refrigeration technician and know how to run a diagnostic test Whirlpool has for this machine. I get an LF code which is water long fill so I checked out the water tube which is ok. So the problem is in the circuit board not sensing the water level. To replace this board is around $350 dollars and if I had someone else do the work I would be looking at over $550 dollars. I only paid around $500 dollar for the washer so it does not make any sense to put a new solid state board into this washer which cost as much as the washer. Our old GE washer lasted us for over 20 years and did a better job washing our clothes. There should be a better warranty on these machines than one year. I did not buy the extended warranty because of the cost and I expect that the product should last at least 10 years or more.

Surprised my daughter with a Whirlpool washer and dryer computerized, never again you have to stand at the washer half the time resetting it over and over. It takes all day to wash. Went to Lowes. They said yes you have to start it three times. What a pain. Never will buy one again.

We paid $6,000 over and above my homes purchase price for double ovens that are defective. Whirlpool will not address the problem! When you bake a pie or a turkey, the bottom and center are raw, and the top burns, because the bottom element is hidden under the bottom of the oven, instead of on top of the interior floor area of the oven. Whirlpools new design is defective! The service technician says the oven is performing as designed therefore there is a design defect! However, Whirlpool will not take any action, because the parts are not broken and they send us back to the extended service plan people. It is ridiculous for the consumer to be caught in the middle. Whirlpool does not want to stand by their product.The builder of our home, Coleman Homes in Middleton, ID, purchased the ovens from Whirlpool originally. Therefore Whirlpool says we are not the original purchaser of the product, Coleman Homes are, and Whirlpool cannot do anything because we did not buy the ovens directly from Whirlpool ourselves, Coleman Homes did. The Whirlpool Warranty (waste of money) says they cannot do anything because it is not a parts issue. Coleman Homes says they cannot do anything because the warranty was given to us when we purchased the home. Whirlpool needs to replace the hidden element with a true baking element so the ovens will bake properly!!! Model Number: WOD51EC0AS Serial Number: D52208658

The electric Whirlpool double oven range seemed like a good choice for a single person. I bought it in 2016 around the same time I had some personal setbacks. After finding my emotional equilibrium I decided to return to my much loved baking. While I have no other complaints on this range the ovens are a problem for baking. The digital oven temperature readout doesnt reflect temperature fluctuations in the ovens. Once you enter your desired baking temp the readout never changes even after you open and close the oven door say to take out cookies. Given some of my poor results I suspect even when Im not opening and closing the oven door the temperature is not maintained. I was going to get an oven thermometer but the user manual says it wont reflect an accurate temperature due to way the elements cycle to provide a consistent temperature. Ha! If you want to bake this is not the range for you. My inconsistent results and too often wasted ingredients frustrate me no end.

Purchased this Whirlpool refrigerator WRT771REYM at Home Depot in June 2014. Within a few months of purchase, had to call for a repair tech because the water line had frozen. Tech unfroze it and told us not to block the air vents to avoid this happening again. The amount of care we have to take to load this fridge so as not to have the water line freeze is ridiculous. Its very picky. For a while, we were still having to unfreeze the line every couple of months. Then it became more and more frequent, to the point where we cant keep it unfrozen for more than a few hours. This seems like shoddy design to me. And of course, the warranty is expired so I am out of luck unless I want to pay for repairs out of pocket.Adding insult to injury, Whirlpool claims that this isnt a common issue. Not true - there are numerous reviews about this very issue on Amazon, Sears, Home Depot, etc. Just try googling the model #. Sad that Whirlpool does not stand behind its products. Yet another American company to stop building quality and rely on planned obsolescence to ensure revenue generation.

I purchased my range, model #WEG730H0DW0 in April 2016. I am extremely dissatisfied with the product and the Whirlpool service. I guess its comforting to know that Im not alone. Ive had two problems so far. The first is with the broiler that clicks on and off. It took several visits and a new electrical board for the service person and me to figure out that the door has to be closed to broil. Not sure about all of you but I am used to keeping the door cracked open to be able to keep an eye on the food being broiled. Apparently there is a thermostat at the front of the oven designed to keep the electrical controls from getting overheated or from melting so when the door is cracked open the heat from the broiler hits that thermostat and the broiler is shut off.The people at Whirlpool are awful and rude. I made so many calls and described the problem in so many ways and not one person knew about this newly placed thermostat or thought to ask about keeping the door closed. It took me and my service tech over an hour of troubleshooting on his SECOND visit to figure it out. He looked up the specs and we figured it out. I wonder how many new electrical boards have been replaced when the solution is as simple as keeping the door closed. A stupid design. Also having the same problems with the knobs. They turn so easily that twice I have smelled gas and realized one of the knobs was turned ever so slightly (before the clicking sound to ignite the stove).Then the third time could have been deadly. I had friends come pick me up and we stood in the kitchen for a bit before we left for the entire day. When we returned the whole house smelled of gas. Someone inadvertently must have brushed up against the stove and the knob turned. My dog, thankfully is still alive and so are we. THIS IS NOT ONLY A STUPID DESIGN BUT A POTENTIALLY DEADLY ONE!! I am forwarding this message directly to Whirlpool in the hopes of getting my money back. I am replacing the range immediately and will never purchase a Whirlpool product again!

Sent an e-mail to Whirlpool. They responded with apology. Sent a second e-mail telling them they should be paying the $300 for circuit board in a two-year-old range. No response. Also, sent e-mail to Geniers. No response. The impression I get is that neither are the least bit interested in the problem. Once they sold the $1260 range, they were done. We will never buy another Whirlpool from any store and we wont buy anything from Geniers in the future.

I have owned my Cabrios for over a year. They have given me no problems at all! I keep them cleaned with Affresh, even though Ive never ever had a smell in them. Also, I have never ever had my washer or dryer not do its job!! My clothes are fresh as a daisy and clean. I bought my Cabrios because my father purchased his first set and raved about them. So, I used his to try them out. Absolutely wonderful machines!! You get more area without those crappy agitators in the way for one thing. Always fresh water, not washing in the same filthy water, yuck! It wasnt but maybe 4 months later for our new house that we got our Cabrios. I insisted on them! LOVE LOVE LOVE my Cabrios!!!

Whirlpool 5.3 Cabrio. This was the worst experience ever with a washing machine. My first cabrio did not work at all. My second one gave out after 2 weeks. It would not spin. I got my money back and would not recommend this washer.

I would not buy any Honeywell electronic water heater thermostat. Has failed two times. I have to pay for a new one to be mailed and for repair. A bad product from all the reviews. Honeywell is claiming they do not service it anymore and gave me a Sears telephone number. Servicemen have said it is a crap product and fails all the time.

Extremely disappointed!! We purchased this water heater about 4 years ago and for the past year we have to manually turn on the burner. Its been a nightmare! We called Lowes to purchase the parts, but they do not sell the parts. There was a nine year warranty. Our last water heater lasted about 11 years. Its such a shame that this one is giving us problems just after 3 years. Im really considering just buying another one. I dont want to continue struggling with this one. Its been a bad purchase and coming to find out that Im not the only one with this problem. If its a defect Whirlpool should at least replace them for the inconvenience. They should take responsibility for selling defective products.

My old 25 yr old Whirlpool died and was shopping for a new one. I saw the Cabrio and was really impressed by the features and large capacity interior. I can say that I thought my clothes were getting clean until I looked closely. I have never been so disappointed with this washer. I wish I had my old one back! Clothes arent clean, they are so twisted when I take them out and theres a horrible smell, like oil burning when it runs. The machine would fill up and when it would start to wash, it wouldnt, it would stop. And a loud humming noise was coming from the back.I shut it off and turned it back on and it wouldnt clear. I had to unplug it and plug it back in to clear it and start over. The bearings are gone now and I was going to have a repairman come and look at it, but now I wont bother! After reading everyones comments this Cabrio is a piece of junk and Im sorry I ever bought it! So now Ill be shopping for a new one tomorrow with an agitator!!! Im not impressed with the HE appliances!!! Ive owned this POS for not quite 6 yrs. Expensive to purchase and I will not recommend Whirlpool to anyone! Its sad that companies today make cheap products!! Built to last... ha!! Well never see those again!!

I bought Whirlpool Cabrio washer two months ago (Model number : WTW7300DW0). They indicate washer use less water and clean better, but that is not true. Some clothes on top of the load were not even getting wet and clothes smell bad after washing. Even worse is that clothes got holes in many places and some clothes were totally destroyed after washing. In just two months, I have to throw away many of my towels and clothes. I dont believe this kind of washer should be sold again. This should be a recall to give us a replacement ASAP and remove any products still in the market. There are many complaints online, I hope someone will stop this and do the right thing.

I purchased a Whirlpool Gold French door with the bottom freezer in October 2013. I had one repair done while it was still under the 1 year warranty, but by the time it was 18 months old, it began leaking refrigerant. I was told by the technician that the cost to repair it would be more than the value of the refrigerator, and the chances of the repair lasting more than 6 months were minimal. I had to buy a brand new refrigerator (not a whirlpool this time). I contacted Whirlpool customer service but they were non-sympathetic. Do Not Buy Whirlpool Products - Poor quality and high prices.

I purchased a Whirlpool Duet front-loading washing machine on September 27, 2010. By October of 2011, it was making a loud grinding noise during any spin cycle. I called for service and was told I needed new bearings which entailed rebuilding the machine. I had purchased a 5-year extended warranty. I was originally told by the warranty company they would replace the machine.After waiting two months, and after several contacts made by me to the retailers customer service, I was told the machine would not be replaced, but repaired. After the repair, on January 6, 2012, the machine now rattles and shakes so much during the final spin cycles. It is literally impossible to have a conversation with someone standing next to you in the same vicinity as the washer, it is that loud. I am sorely disappointed with the Whirlpool line of products and with the retailer who has been dragging their feet on customer satisfaction.

We bought the Whirlpool Cabrio set from Sears in February 2010, for our second home. We counted up the weeks we have actually been here since then, it is about 10 weeks. We figure we used the washer about three times per week. So, we have gotten about 30 wash loads from this washer and it dies mid-cycle. We assume the motherboard crashed. It kicked the breaker. Lid was locked and we couldnt get it open. The washer would not power up. Repairman arrived three days later, got the latch opened but couldnt figure out what was wrong with it. He said it is probably a board and it might be better for us to replace. He wants to pick it up tomorrow to take to his shop. I called Whirlpool to complain. I know the one year warranty is up but to get 30 uses out of this expensive piece of junk and not get any consideration from the manufacturer is not right. I wish I had seen all these complaints before I bought it. No Whirlpool ever!

I purchased a Whirlpool water heater on 9/30/2011. It is leaking at the point of cold water entry and is spewing a brown colored watery substance, leaking on the floor.

Whirlpool Cabrio Top Load, Short Agitator to protect clothing, cost reasonable, on sale $800.00 both (Aug. 2013) - Sears credit no interest. Moved, and had to sell after a year, but I anticipated a long life r/t rating/reviews online. One Problem: no setting to soak clothing that may need it. I bought the largest Whirlpool Cabrio to make sure my Queen bedspread (heavy blanket type fur on one side) would fit. Because of the short agitator I could have bought the smaller one I discovered. I could fit 6 regular side and 4 beach heavy beach size towels in it easily, or two Queen quilts in at a time. I rarely needed an Xlg water setting. The dryer had a steam only setting but I never tried it because it was set up in the apartment when I arrived and the delivery people were not very bright. Put the Dryer farthest from the vent, washer farthest from faucets, and put hot and cold hoses on opposite spigots. I did not want to chance they set up the steam section wrong, as well. I moved across country 1 year later, but have trust the W/D would do well. My last Sears brand (made by Whirlpool) only had one minor problem (on warranty) and lasted a good 8-10 years before moving and selling them to another couple. They were still in wonderful working order (front loader).

In 2012 we bought three new Whirlpool kitchen appliance back in 2012. The refrigerator has needed a drain pan replacement, and two air diffuser replacements. Of course, both air diffuser issues occurred just outside the one year warranty. Then the range oven has required two spark modulator replacements – again just outside the one year warranty. Whirlpool’s solution: buy another 1 year warranty to get it fixed; or buy a new Whirlpool appliance at a discounted price.

Every one of the knobs cracked where they engage the gas valve. One gas valve came loose from the manifold creating a gas leak discovered by the propane company on a system leak test. Screws came loose that hold the tracks to the base for the slide out bottom drawer. The AquaLift cleaning system is useless. Better buy some oven cleaner and rubber gloves. Very disappointed! One star because 0 isn’t an option.

This is a great choice if you like a drawer for a freezer. It’s double door. The racks are easily moved. There’s are drawers for beverages and cheeses and vegetables. One downfall is replacing water filter cartridge every couple months and freezer could be set up a little better so you don’t have to pack things on top of each other.

We wanted the ease of use and longevity of a top loader WITHOUT a full touch screen. Whirlpool has such units in a choice of price levels to accommodate most everybody. The agitator free design and automatic water level feature is amazing. Clothes are nice and clean and uses about the same amount of water as flushing a toilet.

My daughter bought a mobile home manufactured by sunshine mobile home co. in Red Bay al. The home is only 6 mo. old. In that home there is a Whirlpool microwave oven model # WMH2175XVB-1 Serial # TRY 20 23398. After 2 months my daughter microwave stopped working, Whirlpool sent a repair man out to fix it. He didnt have the parts to repair it so he left to order some parts that he thought might be the problem. When the repairman returned two weeks later with the parts, he replaced a door switch. The oven started to work. About 4 days later it quit working again. The repairman returned for the third time, tried repairing the oven and was unable. I had to help him remove the oven so he could take it home with him so he could try to repair it. At that time I was so angry that the Whirlpool co. would send a repair man out three times to repair something that was obviously junk. When I talked to the people at Whirlpool they told me all they were authorized to do was repair it. I explained the repairman has tried three times and couldnt and that they in good faith replace the unit. The answer I received had to come from a mentally challenged person. If this is the response of Whirlpool about their product, then I want no part of them in the future.

When I first purchased the dishwasher I had to call Whirlpool to come out because although I was using a drying agent as Cascade, the dishwasher lower door remained wet causing water onto the utensils. Whirlpool came out and said it would take a few washes until the inner part of the D/W would acclimate to the drying agent. Well the lower door where the utensils basket sits does not dry in its entirety so its a defect, not the drying agent. Also, the decibel 55 is quite loud we cant run the dishwasher during the day, its too noisy and distracting.

I have had this Cabrio washer and dryer for two years now and I would do better washing my things by hand. Save water, sure there is none!! I have a glass lid and I actually stood there and watched a cycle and the clothes on top never even got wet!! My whites are now gray!! Called the company to get nowhere. I am going to buy an old-fashioned washer that actually uses water. I tried to be eco-friendly but I dont like dirty clothes!!

My new Whirlpool Stove, has two grill like tops, heavy duty and awesome looking. It has a special burner to keep food warm, a stainless steel front and bottom drawer for broiler storage. Broiler is also on top in oven, broiler flame.

Self-cleaning oven system DOESNT WORK AT ALL! The company rep I talked with said the system only works on lightly soiled oven and doesnt clean at all on the oven top or sides. When I explained that my oven was less than lightly soiled (I rarely use it) and that I had run the cleaning cycle twice and none of the soil was affected. Apparently the company is aware of this problem and I believe customers should be made aware of it BEFORE purchasing. I was told there was nothing they could do because my appliance is out of warranty. I asked if they had received other complaints and was told they had. I am not surprised.

Whirlpool Cabrio, H2 washer system type 588 01, serial # c0303 10 - We have been in our condo 5 years. The washer & dryer was here and new when we moved in. I have been displeased with it from the start. It takes forever to wash through a load, and the clothes are just as dirty after being washed as before. I soaked some whites in Clorox overnight and ran through using Tide and Downy. Then the stains and dirt were still there. I ran them again it was not any better. I had a professional from Hagadorn come. They could not find anything wrong. It cost us about $100.00. Others in our area have the same complaint. I have never been satisfied with this wash. It just does not get the clothes clean. Please help!!!

In October 2009, I purchased a Whirlpool Energy smart gas water heater with flame lock safety system.$509.00 I had it installed on 5/4/2009 by Westmoreland Affordable Plumbing, $218.00. On 10/15 called Whirlpool stating that the upper thermistor was coding as a failure. They sent me another one to replace it on 10/19/2009. On 10/19/2009, 1 and 1/2 hours later, the tank was coding a bad gas valve, called back and told Whirlpool what had happened and that I smelled gas. I shut off the gas to the water heater and waited for a valve replacement to arrive. On 10/21/2009 I had E.H. Plumbing to install the new gas valve to the water heater, $150.00. On 10/28/2009 the new gas valve went bad. I contacted Whirlpool and argued with them until I had them replace the hot water tank. With their approval I went to Lowes and tried to get the same water tank but they no longer sold that model anymore. I was given their equivalent to the one I had purchased earlier. I had it installed on 10/29/2009, $150.00. I now see a class action suit was filed against Whirlpool for the model in 2008. They were still selling this model after the lawsuit???? I spent $1027.00 for a $509 hot water tank and a lot a days without any hot water. I have all my receipts and returned codes for this transaction. Is it possible to get my $300.00 back (for two extra installations) as a result of this problem? I also kept the old gas valve thermostat.

I love my Whirlpool. Were a family of 3 with a pet dog. Its handle one childs work uniforms and the others sports uniforms (yuck). And then theres my work/weekend clothes. Its very reliable and it gets the job done. We have no complaints.

When you shell out the money for a new water heater you expect it to work the first time. Mine did not. Luke warm water was all that we could achieve. After going through the troubleshooting steps we could not clearly define the problem. So they ordered me the parts and sent them to me. The parts were for the old model control unit and does not mate up with the wiring that is in the unit. The representative was put back in that they had no idea how that happened. And, no wrench came with the thermostat just another thing to spend money on. I told them I have had it. Then they say that this is a manufacturers defect and they can provide me with a list of repair technicians in the area. I gave them one star because I could not give them zero. They should have lead off with the service technician. Still not repaired. I will keep you updated.

I purchased cash for our new house and we notice a couple of times the freezer would start to thaw and the light bulb would freeze up. It has been ok for a while now.

Thirty minutes into running the oven self cleaning cycle for the first time, the middle pane of glass exploded! Weve had this range two years 4 months, and didnt buy the extended warranty. I contacted Whirlpool and they acted like this was the first theyve heard of this. I inquired on the class action law suit in New York from 2012, the year we bought ours, and they had no comment. They were willing to sell us an extended one year warranty and we pay for the service call for only $332! I declined and will never buy a Whirlpool product again.

We bought a new refrigerator when we bought our house in Dec. 2008. On the third of July 2015 my Whirlpool Gold stopped being cold. In fact it was a bit warm. Had a repairman out here today. Warranty expired and the compressor has failed. Wow! Im not happy.

Every appliance Ive ever owned has been a Whirlpool product. I am on my second set of Cabrio washers and dryers. I havent had any issues with the dryers, but the washers are a different story. My first washer, bought in 2008, started throwing water and oil underneath while spinning. A service technician came out... I had to have the entire tub replaced seeing as how the bearings that went bad were in the motor/spinning assembly that was built into the tub. I moved in 2011 and needed another washer and dryer. I was told the problem had been addressed. Now Im having the same problem... the washer is so loud when spinning, you can hear it on the opposite end of the house with doors closed! So the bearing problem has NOT BEEN ADDRESSED!!! Whirlpool will not stand by this product!! Loyalty is not a factor in their assistance... Only profit!!!

Very sad appliance company. I purchased a Standard Pacific Home in June 30, 2015 and moved in Aug 1, 2015. Use my Whirlpool Dishwasher for the first time back in Oct and it was not working properly. Whirlpool scheduled an appointment with Accord Appliance in Temecula Ca and the company was a no show. Called Whirlpool back and Rep Emma was very rude and had to call supervisor to schedule another appointment to repair dishwasher. Whirlpool have sad employees and sad appliance.

The washer and dryer leaves the clothes heavy and wet, the balancing does not work, therefore the spin cycle just bangs against the machine, I tried emailing the support but no response, can somebody reach out.

We purchased a Duet washer in Feb 2011. On Nov 2011, it started making a very loud noise when it would spin. We contacted the warranty company, not realizing it was still under the manufacturers warranty. The warranty company came out and took a look and claimed it would be about $1500.00 in parts to repair. We contacted whirlpool and they also sent a service person that claimed the same thing. Both service people claimed that the other did something to the machine and it was the others responsibility to fix it. We have contacted whirlpool and the parts have been ordered. We were informed today that they are on backorder and will not be available until some time the middle to the end of January. When asked why they just dont replace the washer, the answer we received was that was not the policy.

Whirlpool gold series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two up front is way too hot for regular cooking, even on lowest setting; oven cuts out while cooking -- unexplainable how this happens but you really have to watch the oven while cooking to make sure its still on. Pros: large oven so you can cook ginormous turkeys or prime ribs.

This ref model # wrf736Sdam13 is less than 6 months old. The doors have never lined up. At the top is a 3/4 gap and it is 1/4 at the bottom. This is a side by side. Sometimes the left door will open on its own. If you stand to the side and look across the front, the left door sets out about 1/2. My wife and I have contacted whirlpool many times and they will not do anything. I am ready to get another ref and get what I can for this piece of JUNK. We built a new home and purchased all whirlpool appliances and do not like any of them. Will never buy whirlpool again. Very dissatisfied with all – RANGE, DISHWASHER AND THE VENT HOOD. PS, the vent hood sounds like it is crushing ice when you cut it on. Very, very DISSATISFIED with all of them.

Bought this set for its basic functions. We dont need a lot of bells and whistles. The washer is rated as a water saver but it seems to use more water than our 10-year-old model. The only issue we had was with the electronics. Even though it has few features, it one day decided to not function at all. A call to support recommended just unplugging it for a few minutes so it could reset itself. For once this seemingly crazy idea worked and the unit has been normal ever since. I recommend buying from the outlet store as a scratch and dent. This saves lots of money and if the unit is not on display, who cares about the minor dent.

I was going to write a negative review after our Whirlpool stove oven stopped working. We only had it for three years. Technician’s visit today was $70 for the information that we would be better off buying a new one because the motherboard is gone. However, after reading all the horror stories which are already here, I realize that we are relatively lucky - at least, our stove worked for 3 years... Still very disappointed and unhappy. No more Whirlpool products!

I bought a HD Whirlpool in April 2011 and I hate the machine. It does not use enough water to wash clothes. I open the lid every wash and cannot believe Whirlpool can label this as a washing machine; it spits a little water now and then. I am demanding Lowes and Whirlpool to replace the washer. I have used two Kenmore washer for 45 years and I never had any problems. I use hot water to kill germs -- well there is not enough water to drown a fly. How can these manufacturers sell such product and then give the consumer such a hard time when they ask for help. Dark clothes have white residue stuff all over them. I have to hand-wash a lot of my clothes. I have never in 45 years had to do this. I am so mad that Whirlpool is taking everyone for suckers. Now I am sure that there are a lot of people who just never take the time to complain; too much trouble and just go buy another brand of machine. We consumers need to demand that manufacturers sell quality products.

Whirlpool Platinum Cabrio Washer wtw8240 - Ive owned this washer for two years. Worst two years of my life. Its leaked since day one. They have attempted to repair the leaking on 5 different repair visits (told me the nozzle that puts the water in the tub doesnt stop in time and it overflows on my floor). Finally it seemed to be somewhat fixed and then it started to sound like a freight train coming through my house. They determined the bearings were worn on my tub and had to replace the whole tub unit. Seven visits. I got one month out of it and it’s leaking again. I am now out of the extended warranty I purchased. This is ridiculous. Isnt there a lemon law on appliances? I know if a dealer attempts 4 or more repairs on your car for the same problem unsuccessfully, it qualifies for the lemon law. $800 for a washing machine that dumps water all over my floor and no one can seem to fix it. Well Im done, Whirlpool. Next time I will purchase a plain washer with no bells or whistles and it wont be made by Whirlpool!

We have had Whirlpool front loading washers for 15 years. The first had a bad bearing problem, that was eventually fixed, but still disappointing. The second doesnt is missing some features that the old one had. All and all I am happy with this washers and do not know of anything better, within my price range.

We relied on consumer reports as the primary source for a recommendation on this washer. Just under two years old, it started making a noise, which suddenly went away. Then one day the machine would not spin and drain, and we could not decipher the error code into anything useful. I turned the machine over to find that the drive belt was half-on/half off the pulley on the drive motor. This caused the belt to ride against the belt guard and wear right through it. I removed the belt and determined that the cause of the problem was that the large pulley on the drum was loose. For some reason the nut which holds that pulley on was slightly loose, causing the pulley to wobble. Not sure why they didnt use some Loctite on that nut. I put everything back together and tightened the nut. No problems and I checked it a month later, everything was still good. Fast forward to last week, when the machine was not yet 3 years old. Same thing, washer would not spin and drain. Tipped machine over to find that the belt had fallen off, the drum pulley was again loose. But this time the belt had damaged the pulley on the motor. I figured, no problem, just order a new pulley. Well you can buy just the pulley on the drum, but the pulley on the motor is part of the motor, it cannot be ordered by itself. The cheapest I could find the motor online was $250. We decided to cut our losses and buy a new machine. We will NEVER buy another Whirlpool appliance (or anyone elses by the same manufacturer, i.e. Maytag). Our last Kenmore washer lasted 23 years. Oh but it had an agitator and wasnt listed as HE (High Efficiency), so I suppose the environmentalists would get the dry heaves thinking about the impact of that washer on the environment. But it was useful for 23 years. Now this High Efficiency Whirlpool is headed for the recycling pile. Sorry, I think this hurts the environment more than an appliance which just works year after year. Yep, they took a design that worked and now we have energy/water efficient washers that dont last very long and are so expensive to repair that the solution is to just buy a new one.

Top loading HE machine. Washer does not clean. I have tried all manufacture recommendations, changed detergents and tried laundry boosters, all to no avail. Tshirts, pants and socks routinely come out of the wash dirty and must be re-washed. This negates any energy savings. Also, the noise from the spin cycle is very loud - the washer is on the second floor but I was told by sales person that this would not be an issue with top loader. Overall, very disappointed and after all these years, I have finally given up on this washer and will junk it.

Cabrio Washer mod# wtw6700yw1 - Washer and Dryer purchased 2011. Now washer will not complete entire wash cycle. Shut off after 3 mins lets all the water out. Now affects all levels of wash. Contact Whirlpool customer service. Sent repairman. Claims sensor board needs to be replaced. Costs $285.00 + $55.00 for labor + $79.00 service call total cost $419.00. Needless to say I declined the repair and now after reading all other complaints glad I did. This sounds like a money pit, just keep repairing and never being fix. Repairman suggested Speed Queen washer so now shopping around for new unit. Dryer so far still working.

Whirlpool Gold Microwave Hood Combo GH5184XPS4 purchased new on 12/2009. The plastic vent cracked where clip attached by factory installed screw. The vent fell off microwave on 10/2011. I spoke with Whirlpool customer service. It is out of warranty and recommended to buy new vent part ($40.00). The new vent broke once again on 12/2011, clip attachment location. Now, the plastic door handle is cracking. The customer service is sorry and recommends to buy replacement parts as long as they remain available. There are many reports of similar instances noted online. I live in a newly constructed condominium where multiple owners have had the same problems with their Whirlpool Gold Microwave Hood Combo GH5184XPS4.

This washing machine has not worked well from the time I bought it two years ago. It never fills to the amount of water required to clean clothes, it is always off balance, so I need to adjust the clothes at least five times per load. I end up wringing my load out by hand. The clothes come out smelly and not clean. After the cycle is done all the clothes smell like mildew. The other night while doing a load, it made such a loud noise in the motor and started to shake up and down, and then moved forward, like it was going to take off or explode. I tried to do another load, but after it filled and started to agitate, it started to make a loud grinding sound and there were 25 minutes left, then the timer showed 26 minutes left, like the computer in the machine is messed up. I had to empty the water out, wring out a load of clothes including towels, exhausting.The worst part is that the machine is finally paid off, I am a single mother on a disability and I am stuck with this piece of junk. I felt desperate so I looked up Cabrio washing machines to try to figure out what could be wrong, and then I find all these negative reviews, and these owners all have the same issues. Why has there not been a recall, or a class act, who can afford to replace a $700.00 washing machine every three years. I also purchased the Cabrio dryer which cost over $700.00. I do not trust that it will be any better in the long run.I cannot rate this machine as it has been a nightmare from the start. White socks seemed to come out with more dirt than when I put them in, and I am sick of using bleach all the time, the fumes make me feel ill. This is not acceptable, obviously this item is defective, and a prominent company such as Whirlpool should take the loss, not all the victims that paid too much in the first place trusting that Whirlpool was a reputable company, I will never give them my trust or business again. I hope to hear from you, and if there has been a recall or class act legal actions, please let me know as I want to be involved.

I had the first microwave for 6 years. My husband messed it up so got a new one, same over the stove type. It has lots of programs. Its a rather large microwave, plus it has a steamer which cooks vegetables with steam while I am doing the rest of the meal and whats more important is its quiet. The site is fantastic not just in width but in depth. The best thing about this microwave too is that it has a frozen cycle which does not partially cook the food like most microwaves and the defrost is the same, it does not partially cook it actually defrosts completely without cooking it. This is by far the best microwave I have ever had, and I wouldnt want any other brand. It might cost a little more than the usual brands but its worth it. I also have a mini Whirlpool on my Countertop for my grandchild to use so he keeps away from stovetop at all times.

Whirlpool Gold model WRS526SIAHOO - We purchased this refrigerator 10/2013 with all the matching appliances when we remodeled the kitchen. We moved our 1997 GE refrigerator into the garage. Now the computer board has gone out in the Whirlpool and we are back to using the 97 GE. The technician told me that he sees a lot of these boards going bad.

I purchased Duet washer 3 years ago, but it wasnt installed until a little over a year and a half ago. Machine started making loud noise during spin cycle, and eventually would not spin the water out of the machine. I contacted Whirlpool and was told there was a defect in that particular WP model and if it was confirmed by a provided tech, WP would provide the parts for the repair. The tech confirmed the problem, and I was told the repair would still cost over $450, even with the free parts. When I approached WP and asked them to fix the machine since it was a known defect, it was denied that there was a defect.

I am so bummed that this fridge died. It was perfect in size and function and appearance. I didnt use the ice maker. Within the first year, the temps were erratic, freezing in the fridge area at the rec. setting and too warm when I lowered it. Finally the compressor gave in at 19 months. Of course, out of warranty. HOWEVER, my credit card, VISA, added a year of warranty and is paying the full amt for replacement. Now I have no idea what to get. Every brand, American or Japanese is not made to last. I regret getting rid of my old dependable avocado fridge, thats how hard it is to feel confident to make a good next purchase. Formerly reliable names are only that, OLD NAMES WITH SHINY LOOKS AND JUNK INSIDE.

I purchased Whirlpool Washer WTW4815EW on December 29, 2015 for my tenants apartment and by October 7, 2016 it was not working. I called Whirlpool for service since the product is under warranty. The closest appointment was more than 2 weeks out. On the appointment date the technician called me and said he was on his way to my house which is more than 30 miles from my tenants apartment. The technician said he could not service the tenant area as that was a different group, so we rescheduled for a week later. A week later no one shows up, so I rescheduled yet again for November 3rd and drove myself to wait for the service person who was supposed to be there between 8 am to 12 PM. At 11:40 I saw there was a 10:36 am Whirlpool attempt to call me but no message was left. When I called back they told me the technician called in sick and they called at 7:30 (my iPhone indicated 10:36 am). Now they say someone will come on Saturday November 5th. It will be one month on November 8th with no working washer. While it is bad enough the washer stopped working in less than one year their service support is even worse than the product.

The control knob broke off the washer when it was only two years old. I contacted Whirlpool by email about what happened with the dryer. The control panel is held tight to the dryer now with duct tape and the knob is held on also with duct tape. The knob doesnt work. It is stuck on timed dry so I can at least use it and adjust the time. I cannot use any other setting. It would cost about the amount of the dryer to have it repaired. The customer representative informed me that sometimes things dont last. Im glad for his profound wisdom, but Im stuck with a dryer held together with duct tape. I was offered an extended warranty, but the cost of repair will be nearly the amount of a new dryer. I will seek a different brand in the future.

My water heater burner went out after just over 3 years caused the pilot to go out. I was worried that although all parts were covered for 12 years and labor for only 3 and the labor would be very expensive. When I called and told them about the problem they said the part was covered and would ship it next day air but 10 minutes later another rep called and said they would cover the labor as well and to check a nearby service company as they might have the part in stock. Long story short without having to scream and yell my problem was corrected within 8 hours and all I have to do is drop off the new burner at the service company when it arrives. I have been lucky and haven't had many warranty problems in my life but none that I have had have been resolved so painlessly. I will never buy anything but Whirlpool from this day forward. Thank you Whirlpool.

I purchased a new Whirlpool 3.6-cu ft Top-Load Washer (White-On-White) Model #: WTW4800BQ from Lowes on 11/1/14, which was only 3 ½ years ago. The washer began making noise during the spin cycle so we called for service. The technician claimed that the bearing pack needed to be replaced and the repair would cost $400. This amount is $20 higher than the amount I paid to purchase the washer. Because the warranty is only one year, I contacted Whirlpool today and spoke with a representative. The representative said they could repair it under the warranty. When I asked how to proceed, she then asked me if I had an extended warranty. When I replied that if I had an extended warranty, I would be using it. She declined any assistance. I now have to purchase a new washer after only 3 and ½ years. I own 10 rentals. I promise that none of them will ever include a Whirpool product again.

Bought a Whirlpool Cabrio Washer Dryer combination on 4-5-2009, had it delivered on 4-20-2009, was very excited to get this set as it was like my first ever brand new washer dryer. I thought Id spend the money get something good and it would last for years and years. Was I ever wrong. I bought the set and the extended warranty from Lowes and my total with delivery was 2579.00. 20 days after the extended warranty expires (that I never used) the bearings on my Washer go bad. This thing in spin cycle sounds like a jet engine. I called to see if Lowes would still honor my warranty because I never used it and they said no. I called Whirlpool and checked to see if there was a recall and they said no. I checked to see if there is anything they could do at all because this is a huge known issue and of course they said no. (Just look on YouTube for Whirlpool bearing replacement and the amount of views should indicate the amount of troubled users.)Called a repair scheduled through Whirlpools website to come look at it for a 75 dollar assessment and they said it would be about 500-550 to replace the outer tub - largely due to the fact its labor intensive and the bearings are packed in the outer tub from the factory. I was like are you ** kidding me? I paid 1029 for the unit brand new in 2009 and 550 to fix? I said thank you to the repair guy and escorted him nicely out. Upon that I called back Whirlpool to tell them how displeased I am and how I will not be another product of theirs ever and mostly due to the fact they know this is a huge issue and wont do anything about it. I will be going to Lowes to see if the guy who sold me this pile of crap will work me a deal on another unit or set of another brand after I show him my receipt and express my displeasure with that product. If they wont do anything I will go to another store and spend my money elsewhere - I have choices and others do too. So if you are thinking about buying anything in the Cabrio line, dont. Go Samsung or LG - 10 year warranty straight from the manufacturer and costs 200-300 less than I paid for my washer dryer 5 years ago. The bearings are ** and shouldve lasted a lot longer for the amount I used this machine and for what I paid! Shame on you Whirlpool for using crappy parts to make your machines.

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

After yet another frustrating round of laundry I have to write this. This has been the worst purchase (Cabrio 6800 Washer and Dryer) Ive ever made. Like other reviewers, I thought I was buying a high-end (high priced) product that has performed miserably from day one. Clothes do NOT come clean and for some reason, towels and dishcloths get ripped and shredded. All cycles (except sheets/towels) do not dispense enough water. Of course the one that does, results in the ripped and shredded problem. A little more than a year after purchase, we got an error code indicating the computer board was bad. Code would come up during initial cycle start and again at the start of the rinse cycle. Whirlpool basically said tough luck but shortly after, we started receiving offers in the mail to purchase an extended warranty for $175. Out of principle, I did not do this. Instead we discovered that we could push pause/start/pause/start multiple times and it would eventually keep going. We are still doing that on EVERY load of laundry (start and rinse cycles). I am not far from just biting the bullet and buying a new washer. It will not be a Whirlpool. One positive note is that the dryer has performed well, unlike some of the other reviewer experiences!

WTW5640X The machine is tearing up clothes of many including mine. I gave them the benefit of the doubt and thought I had over-loaded the machine. Not so. There has been nothing run through the machine other than clothes and bedding. When I called for service 1 1/2 months after warranty is out of date I am told I can have a service call including parts and labor and another year warranty for almost $400. If it werent for the numerous reports online of the machine doing the same to others I might have gone for it. Shame on you Whirlpool. Are you the next GM?

I purchased a new Whirlpool Cabrio washer and it has been nothing but a headache. The machine constantly rips our clothes and stretches them beyond repair. Now, the washer keeps showing an F1 error code and I have to restart the machine three times to get it to start. It also stops in the middle of the cycle and I have to restart it. What a piece of garbage! I called Whirlpool several times and they do not stand behind their products. Do not buy Whirlpool. I filed a complaint with the Attorney General and I suggest anyone else having the same problems should do so. Maybe we can get this machine recalled.