We bought this Cabrio washer WTW6400SW2 several years ago. Immediately after having it delivered and installed, it started displaying an F1 fault code. The main control board was replaced under warranty. It happened again within six months. Another board was replaced. That board lasted another six months. The warranty was up by then, so I used the machine by hovering over it and restarting it every time it failed. After two years of this piece of junk, we put it in storage while we worked on the road. It was brought out on 10/01/11. I called a repairman (who came on 10/04/11) to come replace the board again. He told me that the last two times it had been replaced with the same defective board, that Whirlpool had never fixed the problem. He claimed he had the new improved board, which he replaced for about $350. Two days ago (361 days later), it went bad again. The same repair company came back and said it was the board again. I just tried chatting with a person working on the Whirlpool website. They (of course) said they would do nothing about the washer. They do not stand behind their product, obviously. Does anyone know of a class action lawsuit over these washers? It is a ridiculous amount of money to spend for a product that does not work. This is just wrong!

Bought a new set of Whirlpool Cabrio Platinum tin replace my Maytag that had finally died. I believe this is the worst set Ive ever owned. It wasnt inexpensive but its cheaply built. Cant wash a set of sheets without it getting out of balance, even if you carefully place them in the washer as they recommend. They knock up no matter what you do. The dryer is gas and my clothes still have to be turned back on for more time that should take. We are talking about over an hour. Ive had them just a few months but Ive had it. I want my washer and dryer to just do their jobs like you expect. Im selling them or donating them but whichever they are out of here. Whirlpool, I am ashamed of you. Putting out such a poorly made washer and dryer. Instead of the name Platinum. They should be named Salvage. Never again Whirlpool. Never Again!!!

This is the worst product (Whirlpool Cabrio Washer) I have ever purchased. I paid $999 for it new. I had to have it repaired at the cost of $500 at just two years old. My sister bought and had the exact same repair needed. I used to trust Whirlpool but not anymore. I wont buy Maytag either since it is a Whirlpool product as well.

Whirlpool Gas Range model GW397LXUB1 is a lemon. We bought our house new in 2008, and it came with Whirlpool Gold package appliances. Within a year, the console buttons quit working for the oven, and we had our warranty fix the console. Within another year, it happened again, and then again last November and now again this week. This range is obviously defective, yet the only solution was to buy for $350, a one-year warranty from Whirlpool. I asked if they had any sort of redress or rebate if we bought another unit, which they reported no. So I looked online for other people who have had similar issues, and counted at least 75. So this company knows they sold defective units, but wont stand behind them without substantial cost. All this simply assures me is that Whirlpool is NOT a stand-up company, and I can assure you that Ill never purchase any product from them again.

Outstanding, however our location has a hard water rating and as such we have to use a deodorizer to balance this out. A wide range of variables which are a fit for my purposes. Interior dimensions and layout are more than perfect for my uses. This particular dishwasher is built in so blends aesthetically into the design of the kitchen seamlessly. The product has a drying system which successfully blows air over the top tray to eliminate wet areas within depressions of crockery, glass, and so forth, its excellent. There is also a light steam setting which removes tough deposits from surfaces.

Just wondered if anyone else has had a problem with the paint bubbling up and peeling off their washer and/or dryer. My washer and dryer are in my laundry room off the kitchen with a heat and air vent in the room and I dont understand why my paint is doing this. They are about 5 years old and have always been in this room, never in a garage or basement. My dryer was rusting on the outside about 3 years ago and even though I bought the extended warranty, Whirlpool said it was only cosmetic and they wouldnt do anything about it. I bought them at Lowes and they were good enough to give me a new one to replace it. Both of the machines now have the paint bubbling up and peeling off and there is nothing that can be done. Anybody else have this problem and if so what can be done to repair the paint? This is my 3rd set of Whirlpool washer and dryers over the past 44 years and I will purchase another brand next time.

Having serious health issues with both our washer and dryer. I believe there should be an urgency and more serious resolution. Our washing machine is getting clothes trapped and producing friction causing excessive and heavy smoke from the drum. Our dryer has a random bolt/screw in the drum that catches and tears clothes. Although this doesnt happen on every cycle. It happens enough that it should be investigated, repaired and reported to Health Canada. I contacted Whirlpool on September 15th 2015 with my concerns. Nothing is being done! Ridiculous. WASHER Serial: HL23299429, DRYER Serial: M24507313.

My Whirlpool dishwasher washes dishes well, when it drain but it will not drain. I purchased insurance repair service from AIG. AIG is a total rip off. I paid them over $300. I have called many many times. They promise someone will call but not one ever has. I would never work with AIG or Whirlpool ever again.

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

We bought a Whirlpool range. The same day we got it the burner exploded and my electricity went off. I called the customer service to request a replace, they told me a technician had to go and look at it. They did. I had to miss a day of work as they come between 9 to 5 pm (will not tell you what time). The guy say the range is defective (really!??) and will need to request parts. I called them again (after 15 times you wait minimum 30 min each time). They told me they can replace the parts. I said I bought a new appliance not an use one. Money back. Told me somebody will contact me. Week later nobody contact me and still waiting 30 min each time. I called nobody answer my calls. I wonder I may get somebody if I wait hours? No idea. Please do not buy from this guys... They are bad in all the way.

I purchased A Whirlpool washer model WTW4816FWD some six months ago and it is worse than my 13 y/o washer I got rid of. When wringing clothes it seems be out of balance as it bangs like crazy even when clothes are adjusted. I thought it was the feet but no dice and the auto sensing levels allows for the washer to fill completely with only three items in it? The noise it makes while washing can be heard throughout the whole house too. The cycle takes three times as long of any Ive ever used! I hate this thing.

I purchased a Gas Stove from Home Depot on 11/23 and it was delivered on December 3rd. My God, Im having a dinner party tonight and the stove doesnt heat up past 170.. Unbelievable!! Need a replacement gas range. Tried to chat and call Whirlpool unsuccessfully. I am very one disappointed customer right now!

There is a melted hole in my Whirlpool microwave. The model WMH53520CS is on the recall list for this but not my serial number. Other have posted this and theirs was not covered. This should never happen. I have never had a microwave do this. If I have to replace it I won’t buy Whirlpool ever again.

Whirlpool N50T61-403 - I bought this thing today 8.21.14 from Lowes. It is a Whirlpool 50-Gal water heater (6th sense) and was going to have it installed by their installer, but elected after seeing it was very similar to lining up with my old unit. I got it in and then filled it. After filling, I lit the pilot light per the instructions then turned the knob for heating it up. Success, the flame spread across the burners...then went out. The steady blink changed to the 2 blink code indicating a bad thermopile. It did not work - right out of the box. No plumber near me carries the part. Whirlpool has thus been pretty good about it offering to have someone come out at their cost... But if no one has the parts, that is no good. I am moving from this house so if we can get it to work, its the problem for the next owner. If not - Ill have to get an RMA and go back to Lowes... Then try the Rheem from Home Depot. Will see if they will overnight a part tomorrow. I found the other reviews - and I dont like it that this thing appears to have difficulty right out of the box.

We bought the Whirlpool water heater and not long after, it quit heating. After many phone calls, we finally got a response and were told to get the replacement thermocouple. We did this and it was the wrong part. We found out that we had to have a right hand thread thermocouple. Now, the heater is out of warranty and we cannot keep it lit at all. It takes at least 3-4 times before it will light once and then it goes out every time the hot water is used.

We owned our Whirlpool Gold refrigerator GS6SHEXNL00 for 23 months when our electronic control board went out resulting in the light and interior temp display to go out. I called Whirlpool and they told me the control board was not under warranty. I subsequently replaced the board at cost of $156. This morning, 7 years from when I bought the fridge, the control board went bad again. Amazon now has a replacement board W10135090 for $67. There are thousands of complaints regarding the Whirlpool electronic control board, which Whirlpool just ignores. This should be a recall item. I will not buy another Whirlpool product.

Purchased a black Whirlpool refrigerator, Gold Series, Model GB2FHDX WB 22 cu ft. with bottom freezer from hhgregg. Within one month I had water on my floor, ice buildup on bottom freezer floor. I had previously reviewed fridge and noise was a concern but I thought I could live with that. I contacted hhgregg. They would do NOTHING, told me to contact Whirlpool. The 1st repairman said it was the ice-maker. I DO NOT have an ice maker. He fixed a duckbill. 2nd call 6 months later, same problem with water, serviceman replaced duckbill. Next year, 2011 same problem with water on floor and ice buildup on freezer bottom floor. After numerous repairmen I contacted Corporate Office of Whirlpool. They sent another repairman at their expense. We are now 6 years later and I am having the same problem. Dont buy a Whirlpool Gold & dont buy from hhgregg.

After reading all reviews online on the lid of the Whirlpool Cabrio Washer, it upsets me that there has not been a recall on this. Our lid has snapped & has to be held down until the lock light comes on. Often times during the cycle it must sense the lid is broken & thinks it is not locked & sets the load off line. I have to pause the load & then reset the load & hold the lid down tight until it restarts.

Since May 3, 2016, five servicemen have failed to repair my Whirlpool refrigerator (WRF560SEYM), which is less than 2 yrs old. One trainee from A&E Factory Service had the nerve to reinstall broken parts. I have been completely without refrigeration for the past 48 hrs only to learn that the repairman scheduled for tomorrow has been cancelled because AIG warranty has not approved his visit. Further investigation reveals that the parts were never ordered, pending approval from AIG. Whirlpool cant help me because AIG has not declared the appliance unfixable. Hhgregg cannot help. I have spent countless hours on the phone on hold & wasted hundreds of dollars on spoiled food. Dont trust Whirlpool. Theyre not the company they once were. Their warranties arent worth the paper theyre printed on. Buyer beware!

I went from an HE front loader to an HE top loader (Whirlpool Cabrio WTW7000DW0) due to the risk of mildew with the front loader. Im not the only one doing laundry and if someone else does it, it always seems that they shut the door when empty, contributing to moisture and mold that needed to be cleaned out of the gaskets. I am so unhappy with my top loader HE washer. When I stop the machine and look, I always see my laundry half covered with dingy water, sometimes part of it still dry at the top and it is disgusting. I frequently have to rewash loads due to detergent getting trapped in folds or pockets created that hold on to dirt and lint, even being careful with the detergent amount. I run the washer now every time with settings of deep water, extra rinse, heavy load and presoak with instructions, with settings taped to the top for others.At almost 1 1/2 hours each load, we just cant keep up. The laundry still forms pockets and sheets form a giant tent over the entire load that has to be unraveled at the end of the cycle and wound so tight it had no chance of rinsing. I had to get a repair person out because it got out of balance and he had a small hand-held computer to enter a code to rebalance it. When we discussed the issues I was having, he was ready for everything I was doing wrong. He told me I can not wash blankets or large items (I thought I was buying large capacity with such an enormous drum). He told me they have caught people adding water with a bucket during cycles and that the washer software can tell them if people are trying to work around the system which voids the warranty.Apparently, this is a common complaint he blames on the government wanting high efficiency so they make the numbers look good, sacrificing the ability of the washer to perform at what a consumer expects. I have never seen the water in my drum higher than a couple inches and the drum is HUGE, but never used to capacity. He told me his wife demanded they get a commercial washer because she was so angry about how poorly it cleaned. I feel so scammed and I wish I could have my old agitator back. $100 for the repair call, $150 for the code to be put in and Im on warning that they will see if I try to add water, run out of balance or dont comply with any reason they can void the warranty by just checking the data the washer is collecting on us.

Bought this washer in May of 2019: Whirlpool - Whirlpool - 4.5 Cu. Ft. 37-Cycle High-Efficiency Front-Loading Washer with Steam and Load & Go™ XL Dispenser - Chrome Shadow. Model: WFW6620HC. SKU: 6313774. Paid over $1,000.00 for it. FIRST TIME washing our sheets, we had snags & rips. I immediately called and was referred to Whirlpool and then referred to an outside repair company. They sent a technician out who said everything was functioning properly despite having ruined 3 sets of sheets (these were not all washed at the same time & I didn’t realize they were being snagged until making the beds).I continued to use the washer - clothes were fine, but yet again, MORE sheets and now comforters RUINED!!!! I called YET AGAIN after troubleshooting the problem myself and finding that the drain holes in the drum had metal pieces sticking up causing the items to snag & rip. Another day taken off work to stay home for the repair. The repair guy comes out, the part was broken. So now I’m left once again with a faulty washing machine AND no ETA on when the new part will arrive and be installed AND having to take yet another day off work.7 sheet sets, 3 comforters, multiple shirts, & multiple bathing suits RUINED & was told there was ‘nothing they could do!’ I will NEVER EVER AGAIN purchase anything with the Whirlpool logo. It’s JUNK! Just an FYI, this was initiated in May of 2019 and it is now the middle of September 2019 with no fix updates. Who can go months without doing laundry???? Once again, poor customer service and JUNK of a product!

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

Recently bought a 19-cubic ft French Door Whirlpool refrigerator. Seems to work fine at this point, but the compressor/cooling system has a fairly loud swishing noise it makes off and on during the cooling cycle. According to the owners manual, this is normal. If I had known this, I would not have bought this brand. Believe me, it is loud and you can hear it from all parts of my apartment. Also, once you examine the fridge up close, it really is cheaply made. Low-grade plastics for shelves and compartments. And this was not an inexpensive product to buy. We are talking out the door paying $2,000. Sad it is American made. My parents bought a Samsung last year and it is of much higher quality than the Whirlpool I have. But so far, it is keeping the food cold. Just wish it was quiet.

Whirlpool appliance suite purchased May 2013. Whirlpool Gold French door refrigerator with bottom freezer, Model #GX5FHTXV. At the end of my kitchen remodel, I was excited to have my new Whirlpool appliances delivered by an authorized Whirlpool installer. When the refrigerator install was complete, I alerted the delivery people the French doors were not aligned properly. There was at least 1/4 difference at the top of the doors. They did their best to fix the problem to no avail.I called the Specialty Appliance store to complain and they had a repair man come a few short days later to examine the issue. He inspected the problem and had to order new door parts. A few long weeks later, the repair man came to install the new parts. Well, to my disgust, the new parts did not fix the problem. This next sentence only refers to the place I bought the darn thing. I then called Specialty Appliance to inquire about returning the appliance and of course they wouldnt take the appliance. Im stuck with it. The workman ship is cheap. The internal drawers are poor at best. I spent a good deal of money on what I thought would be a good product. My previous appliance suite was Whirlpool and I NEVER had issues the 13 years I had them.Whirlpool Gold freestanding double oven gas range, Model #GGG388LX. Problem: oven catches fire while self-cleaning oven. Big problem. Takes forever to get rid of the smell that leaves behind. The range itself has worked well. No issues with cooktop and its easy to clean. The grates dont stay black and look rusted in a couple of places. Oven cooks well as I know how to make adjustments as to not overcook meals.Following cleaning instructions provided by Whirlpool, I wipe out the oven (when cool) after spills if there are any. I thought I would run the self clean since Ive had the appliance over a year to properly maintain it. BAD IDEA. After running the self clean cycle for about 35 min, I noticed fire. Wanting to protect my $60K remodel investment, I quickly cancelled the clean cycle and watched smoke pour out of the top. Not a fun experience. It took about 15 minutes for the fire inside the bottom compartment to finally go out. Wont be self cleaning my self-clean oven again! By the way, I didnt clean the oven with chemicals because the owners manual states not to and I HATE using those chemical anyway. Again, stuck with an appliance I am not satisfied with. Lesson learned? Yes, I will NEVER buy a Whirlpool product again. Kinda wish I still had my old white ones...

Its just a plain refrigerator. No bells and whistles. It could have more space in the bottom and well as a ice machine or ice maker. Nothing special about it. Just a place to keep food. The light in top could be higher so food does not touch it.

When you shell out the money for a new water heater you expect it to work the first time. Mine did not. Luke warm water was all that we could achieve. After going through the troubleshooting steps we could not clearly define the problem. So they ordered me the parts and sent them to me. The parts were for the old model control unit and does not mate up with the wiring that is in the unit. The representative was put back in that they had no idea how that happened. And, no wrench came with the thermostat just another thing to spend money on. I told them I have had it. Then they say that this is a manufacturers defect and they can provide me with a list of repair technicians in the area. I gave them one star because I could not give them zero. They should have lead off with the service technician. Still not repaired. I will keep you updated.

Refrigerator caught fire - I own a 2003 Whirlpool Gold side-by-side refrigerator that I bought new from Lowes in 2003. On Friday, July 13, 2012, I woke up to the smell of burning wires. I called 911 and they sent out a fire engine. While waiting for the firemen to arrive, my neighbor came to help me determine where the smell was coming from. Within seconds, we heard loud clicks and a huge cloud of gray smoke came out from behind the refrigerator. The firemen arrived, entered the house, unplugged the refrigerator and told me that the smoke and smell was coming from behind the fridge.

I like Whirlpool, but the ice maker never worked right. Now l have to clean the ice off the dispenser about every three days. Other than that has been good. This is my third Whirlpool refrigerator.

I purchased the hot water tank from Lowes 3 years for over $500.00 within the first year, I experienced issues. I have the same pilot light problems as everybody else. I have hired a plumber four or 5 times to clean and blow everything out as instructed by Whirlpool. The hot water heater will not stay lit. The plumber has replaced every part possible two times. Customer service continues to inform me to do this and that and everything has already been done. I am without hot water again with children in the house. Once again, we are boiling hot water so that we can bathe--total inconvenience. This product is defective, and has cost me money to hire a plumber each time. I would never recommend this product to anyone!

My gas range doesnt work all that well. Sometimes the flame catches and lights, sometimes it doesnt. Oven seems to be less than steady in cooking. It is ok, but I wouldnt buy again.

Electric hot water heater model E40H6-45-100 - Purchased at Lowes. Husband installed, tank filled, no hot water coming through house lines. Called support center several times after trying each recommendation that did not work. They kept saying it was a plumbing problem. My husband is very smart when it comes to electrical and plumbing. He has done numerous repairs to our homes over the last 30 years we have been married. He knows what he is talking about and told the support tech that he believed it was a faulty water heater. She immediately said the units are all tested before they leave the factory. The final step was to remove the nipple that the hot water flows through out of the tank and remove the two black bellows. Now my husband can see directly through the piece but also decides to put his finger through the the open whole on the top of the tank and cannot get his finger through - it is blocked. He gets a flashlight and a screw driver. Puts the screw driver through a thin plate that was blocking where the water should be coming through. He can now actually see the water in the tank. This was the whole problem! So they could not have tested this tank. They did give us a ref number to take parts back to store to replace parts we already bought and cannot use. Its the time and energy on whats suppose to be an easy job that counts. Will not recommend Whirlpool products to anyone and probably will not purchase any in the future. Ours was not as bad as most of the other reviews I read but wanted to advise others who may think about what brand to purchase.

Updated on 07/30/2021: On 5/4/21 a tree took out a neutral on the power line to my home and after inspection by my electrician, he said my Whirlpool refrigerator was done. Not even 1 year old. When attempting to get Whirlpool to replace the refrigerator, they said they have to try and repair it before considering any other options. As they do not cover damage by acts of God their warranty would not cover replacement. Mind you I paid around $1500 for my refrigerator and it was not even 1 year old. 5/17/21 (2 weeks from when the refrig got fried and I had to get and I had to purchase a used refrig until then) serviceman said he had to order parts. 6/1/21 - Motor-Cond $158.20, Fan Blade $13.97, CNTRL Elec $60 CORE [PI] $497.45 and Evap Fan Motor $183.91. Did not fix the problem and had to order more parts. 6/8/21 - Evap Fan Motor $183.91 (first one did not work), Rail $34.76. Service tech said to wait a bit before moving the frig back to make sure it was cooling properly. Finally moved it back on 7/7/21 and hooked up the water line. Few days later noticed water leaking from the top of the freezer door and a lot of water on my floor. Heard a funny sound and found water spurting from the top 2 corners of the freezer door. Called whirlpool warranty and was told they would contact me. Next I get a notice that I have a service appointment in August. Was able to get it moved with a follow up appointment with a part that was broken during the last repair for 7/28/21.7/28/21 - Fill tube heater for icemaker was open and frozen - now tech ordered Rail $34.76, Freezer Door $1,525.84 and Valve $124.23. 6-8 weeks custom order. So we also have to added 5 service calls to the cost - Approx. $500++. Total Replacement Parts = $2,758.81 with a final total cost to repair of $3258.81+ vs just replacing or reimbursing me for the appliance of approximately $1800. Someone needs to review their model because not only am I without a working refrig for 4-5 months, but the repairs cost them $1500 more and now they have a customer who will not longer invest in Whirlpool appliances because of bad business practices and inconvenience.Original: I purchased a Whirlpool side by side refrigerator in July 2020. Earlier this month I had a tree pull down a power line and disconnect the neutral, allowing a full surge of power to go through my house. It fried the exhaust hood, literally melting the components. It also fried my refrigerator. The electrician who reconnected my home signed an affidavit that the refrigerator was permanently damaged due to the surge. When contacting Whirlpool to file a claim, I was on hold over an hour before getting a person. This happens every time you attempt to contact them, so patience is required. I was not able to get a service call on my refrigerator for 2 weeks (5/17/21) so that left me without a refrigerator. The service company showed up early and I had no choice but to leave my job or reschedule another 2 weeks out. The tech said he could only repair and made an attempt to contact Whirlpool to get the unit replaced and he was on hold for over 30 minutes. They declined and said because it was an act of God they could not replace it. I was already having issues with the unit before the surge of a constant defrost that was causing food to spoil due to melting then refreezing causing freezer burn. I also lost over $500 worth of food. They dont cover. It also caused the icemaker to constantly freeze up. Now it will take at least another 2 weeks for the replacement part to fix and a refrigerator is not something you can go without that long. I had a concern this would happen. When speaking with customer I service, they said they just needed the tech to confirm it was damaged to replace it. At this point he said he does not know if the piece (on 2 weeks backorder) will fix it. They can only tell after the fact. He said Whirlpool only fixes and does not replace, which is not what Home Depot informed me when inquiring into the warranty with Whirlpool. They said Power Surges are covered. So with this in mind, I would seriously consider buying from Whirlpool. Things break, situations happen and no one should have to go without a refrigerator for over a month because they may be able to fix it. Then there is the concern if something is melted/destroyed inside, if it could cause a fire in the future. Will never buy another Whirlpool appliance again. They cant stand behind their products, the products are worthless. And yes, I am very upset. Again - just had Whirlpool tell me its not covered as it is an act of God! ARGH -

I bought a Whirlpool 5-burner gas range with double oven at a cost of $1700. Almost immediately, the finish above the oven started cracking and now is starting to chip off. When I contacted them, they stated cosmetics were only good for 30 days. We had just moved and were getting settled so we didnt use the range much for the first 30 days. I am very unhappy with this product and also unhappy with Sears for their lack of effort.

On its 1st year, the water pump went out. It cost $200.00 to replace it. On its 2nd year, the circuit board went out, and it took $300.00+ to replace it. On its 5th year, the bearings went out and cost $250.00 to replace it. I bought this for $900.00, and I already have paid $750.00 plus the price of purchase which makes this washer $1,600.00. Whirlpool should compensate all of us who have worked hard and have purchased this product! I will never purchase from Whirlpool again. I can’t afford them. I should get a refund from Whirlpool. Don’t they care? Email me for these problems at **. I am so dissatisfied with this product.

The company I work for bought a new washing machine a couple of months ago to make it easier for those that do the laundry here. The washer was suppose to be this great washing machine which has turned out to be the biggest piece of trash on the property!! Every couple of loads you have to turn it off and hopefully the computer in this Whirlpool cabriolet will reset so you can wash a load of clothes. You have a 50/50 chance it will work. DO NOT PURCHASE THIS MACHINE. IT IS THE WORST WASHING MACHINE IVE EVER USED!!

After replacing our competent GE dishwasher with a Samsung dishwasher and having to replace it immediately due to the terrible job it did, we bought a Whirlpool Gold Series (stainless tub) for just under $400. I realize this is the bottom of the stainless tub price point, but we have been so disappointed! The silverware container sites outside the regular tub, and rarely cleans even easy substances to remove, if there are more than a few items in each container. Dishes on the other levels are very hit or miss -- each and every load has to be examined for dirty dishes. Id pull this one out and return it too if it werent such a hassle. Dont buy this product.

The Cabrio top load washing machine is a piece of junk, an expensive piece of junk. The only way someone could give this machine a good review is if they work for Whirlpool or they think beating clothes up against a rock in the filthy Ganges River makes them clean.We purchased the HE top loader because we were told that all the problems of the front loaders had been worked out in the new top loaders. What a joke. At least the front loader I had, cleaned the clothes. Since we got the glass top model, I made a movie that shows several items of clothes just sitting on top, not getting wet, not getting moved around, not getting rinsed; therefore, not getting clean.After the wash cycle spins down, the clothes are pinned up against the side and the rinse barely touches them before its final spin. We have several items that had stains left from the soap - yes, we used HE soap, Im not stupid. Never again will I waste my money on a Whirlpool product or anything from Best Buy.

This microwave oven has worked well now for about six months and overall we have no complaints. My only complaint is that it has a cheap feel to it, especially when the door is closed...it creates a rattle type hollow noise....it just does not sound like it is well made. Time will tell I guess. The unit works well and heats fairly evenly. The cook options are plentiful but we rarely use most of them as we are usually merely re-heating food or coffee. The defrost cycle does work well for us.We purchased this microwave oven as well as a Whirlpool Range and Whirlpool French Door Refrigerator at the same time from a small Home Depot. Whereas that store had the microwave on display it did not have the other two on display and therefore we purchased them sight unseen....a BAD, BAD mistake. I have reviews for those two so I will say no more about them here. Thus, overall, we are very pleased with this Whirlpool Microwave Oven and would recommend it.

I just purchased this washer Whirlpool Cabrio. Im experiencing the worst with it because it seems to take forever for it to wash. I came to look at reviews to see if other people were having problems like me. My issue is when I put it on quick wash it seems to say 41min then to 56min then goes down again and up again. I feel like its using more water as many times I hear it filling and washing. I didnt see anyone complain on that part but for the price its a big headache and upsetting because I spent that much thinking you get what you pay but I rather have the old washer I had than this. If anyone has had this issue please let me know and was it an ongoing thing. Not sure if you can comment back to reviews but shame on them to see all these unhappy people and not trying to make things better for them. I wish I read reviews before getting it. Yes it looks good on the outside but is crap.

I have a Whirlpool refrigerator and it is the 2nd one in 12 months. The first one the refrigerator was freezing food in the fridge part and thawing food in the freezer part. After several times a technician came to try to fix the problem and arguments with Whirlpool. They finally replaced the refrigerator. The new one is now doing the same thing. I am contacting Whirlpool tomorrow.

I have had my Maytag (Whirlpool) Centennial Commercial machine for 10 years and it has not required any repairs or have given me any issues. I love the water level sensor that doesnt require me to select a load size. I would highly recommend the Whirlpool brand to consumers.

My washing machine quit working with one month left on the warranty. In trying to schedule repair I was never able to talk to a live person. Via chat and online scheduling they could not or would not come out for 10 days. Also they would not approve use of a local repairman who was willing to work on it in 2 days. Waiting 10 days for service on a washing machine is crazy.

Weve had this microwave (WMH31017AW-2) for 2 1/2 yrs and the door is falling apart. It started with one crack and now the middle glass of the door is falling out! I took the door off so the the glass wouldnt fall on the stove and the plastic around the door literally crumbled apart. So disappointed since that was the same reason we took the other one back that was in this house when we bought it. The microwave is now discontinued and when I did find a door online it costs as much as the microwave! Whirlpool doesnt distribute the dependable products that were, back in the day, associated with the name WHIRLPOOL. Shame on the greedy people who have taken over and cut back on quality material and labor to put an extra penny in their pocket!

We bought the washer and dryer set almost three years ago. Great sales pitch! Energy saver, extra capacity, low water usage, Whirlpool name and I thought we were getting great quality! Three years later I am disgusted, disappointed and am junking the washer. The dryer has a new heating element that we proudly fixed ourselves after the repairmen told us that these were meant to be throwaways. We just thought he did not want to work on it. After watching several YouTube videos we had it apart and found the issue was a cracked heating element. We ordered a new one for 100$ and spent another 4 hours putting it back together. If we had to pay a repairmen to do all that the bill would have been the price of a cheap new one. Fast forward three weeks and now the washer quit and it can be one of at least 15 problems. After reading all these reviews we have decided to toss it as junk. It took forever to was a load of clothes negating any energy saving! Whirlpool should be ashamed of themselves for ripping off all of us hardworking Americans selling us junk. At one time the Whirlpool name meant you could count on a quality product! If Whirlpool really wanted to do the right thing, they would stop selling these immediately and give customers a credit toward the purchase of new washers and dryers!

Purchased a Jenn-Air single wall oven model JJW2427WS after seeing it displayed in an appliance store. Oven was installed as directed. Upon viewing the panel, I discovered that it does not light up. You cannot read the function or numbers, never mind start and cancel without a flashlight. I have been a Jenn-Air customer for over 20 years. This is the first time I have been disappointed. Also, has this model been discontinued or recalled?I wrote to the CEO of Whirlpool and explained my problem. I was told that this is not a functional problem, but perhaps a design dissatisfaction. I cannot believe that there are other consumers who are not having difficulty using their appliance without additional lighting in their kitchens.

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

This is my first electric range. It’s amazing! It cooks evenly and at the exact temperature! The stovetop has size adjusted burners, again at the precise temperature. And the look is very sleek & modern, perfect for a new kitchen! I am so very pleased.

Everything Whirlpool that I buy is junk these days! Whirlpool used to be one of the best brands, now, cheap China GARBAGE! My dishwasher will not fill enough to clean the dishes without setting it on pots and pans. Then it runs for hours and uses a ton of electricity! I tested the water fill cut off, after it fills it is not even close to lifting it and the switch works fine. I returned the Whirlpool dehumidifier I bought recently, it was junk as well!

I purchased a new Whirlpool stainless steel smooth top range model #WEE745H0FS and it was installed the day before Thanksgiving, 11/22/17. The oven door handle was broken on inside by installers. I called Whirlpool warranty on 11/24/17 and requested a repair. A repairman came the following week two days late. He said he needed to order a part. After calling the “Whirlpool approved” repair shop multiple times over the next two weeks, I was told the part was backordered. Finally, yesterday, 12/13/17 the repairman showed up an hour later than appt. time. He took the oven door apart again and the new part didn’t fit my oven door. He had carelessly ordered the wrong part. I was told he’d put a rush on the correct part and that it would be here 12/18/17. I will never buy another appliance from Kelley Appliance in Augusta GA nor another Whirlpool product. I have had to use duct tape on my brand NEW oven just to use the oven so it doesn’t fall apart when opening.

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

I bought a Whirlpool fridge in 2014 and started having problems a year later. It was making really loud noises and the fridge part wasnt working. All the food was warm. Of course there is no warranty on it after one year. I called a repairman and he said that the doors dont seal properly so the warm air is getting in causing condensation which freezes the engine/fan which is the cause of the loud noise. The reason why the upper fridge is warm is because the fan pushes the cold air up from the freezer, which of course wasnt working. Then I noticed that the frame at the bottom of the fridge is bending causing the freezer not to seal properly which would be the reason for warm air getting inside the fridge.

I actually need help, we have had our over the stove microwave for two years, for the last 8 months it has inconsistently worked. We have to wait for the light to come on before it will come on and here lately, I have push on it to get it to work. This happens daily. Does anyone have any suggestions, I would hate to have to replace a two year old microwave.

I bought a portable Whirlpool dishwasher on Jan.16 2016. We didnt buy extended warranty. After all, it was suppose to be new, should outlive us. It wont drain, my husband took the top off to see if he could fix it since I was told by Sears that no repair person is available in our area. I am only 10 Km from Saint John N.B. He found he couldnt take the front or back off, its all one piece, he is 84 years old. Under the top, it shows different colored screws, which tells us it was a used one or had been re-conditioned. I am very disappointed in Sears, have been a customer for many years. Everything in my house is Kenmore except for the dishwasher, only because they had no Kenmore. I might add that it wasnt used much. Its just two elderly people and only used when we have company. I cant afford another one. I bought this one from 1,000.00 I won on Lotto Max. I am so upset about this. Appliances should last longer. My Kenmores have.

Our new refrigerator was delivered on March 28, 2015. On May 31 as I was opening the door, the top of the bottom door handle broke. I was finally able to get a door handle shipped to my home and I replaced the handle. On July 21, I am opening the door and the 2nd handle breaks in exactly the same place again. Two broken handles in less than four months. Terrible design flaw in this door handle. Now, I am being told by a service representative that the handles are only warrantied for 30 days because handles are cosmetic.

I bought a Whirlpool refrigerator in 2007 from a recommendation from my repairman. He told me that most refrigerators last about five years. I cant believe after five years I will have to buy another refrigerator. I know someone that has a refrigerator that is 50 years old. Cant any refrigerator makers make any appliances that last? With all the technology we have nowadays, it seems like you could. You just want the public to spend more money on repairs or a appliances. Hope you buy the product you sell! Looking forward for a reply.

I purchased this Whirlpool Cabrio Platinum washer on 12/1/12. I started getting an F1 fault and all the lights on the machine light up like a Christmas tree during cycles now. I thought I would research Google to see if others were having the same problem. I was VERY disappointed to see all of the same issues others were having with this high end washer. Without even calling a repairman, I know that this motherboard fix is $400+ based on all of the negative feedback. We have a large Whirlpool plant in my hometown, and I hate to see the lack of resolve by Whirlpool.

I purchased this dishwasher (whirlpool WDF330PAHW2) in February 2019. Really worked great until May 2020. Now doesnt drain on the last cycle, smells bad (even though cleaned) and door leaks under handle on front. Really too bad. I have been a Whirlpool champion for 25 years. Now not so much.

Ive had the WDF510PAY dishwasher for 3 years and the circulation pump broke. To be more specific the impeller inside the circulation pump warped and then basically got lodged because it became oblong and then it wouldnt pump water to the spray arms etc. I bought a new pump because the warranty only last a year. The pump cost around 90 bucks. After not even 1 full year this factory replacement pump failed again. I reviewed other Whirlpool dishwashers more expensive and I found they all have this same junky circulation pump. Im not sure of a better dishwasher but I would never recommend a Whirlpool dishwasher again. They also use the same circulation pump in Maytag and many other brands. Whirlpool or whoever designed and sold this pump to Whirlpool should be tracked down and beaten. Simple products like dishwashers should last more than 3 years. The technology is nothing new. A product should last 10 years at least.

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

I am very unhappy with this Whirlpool refrigerator model# GX5FHDXVQ 04. I bought this model in October 2011. You have to push the left door to close it and if you dont then the fridge will stay open. I had a Whirlpool tech come to fix this door problem so this is what he told me: 1) You have to push the door in order to close it properly; 2) Before closing the left door, I should first open the right door (losing energy); 3) The gasket will break very fast; 4) Buy a three-year protection plan because you will have to use it; 5) The freezer is very uncomfortable. In the bottom drawer, you have to fit your stuff. If you put your freezer stuff in a drop higher, then you cant close the drawer, so I am losing space; 6) Sometimes when I fill up the fridge, I move the temperature to #5. After a day, the top shelf back stuff will freeze and the front stuff will stay on fridge temperature. Yesterday, 4-18-2012, for the second time, the freezer gets a sheet of ice. Repairman will repair it but who knows. This fridge looks to me like a lemon. The height is 70 but listed as. I rate this fridge with a CCC.

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.

My new Washing machine was to be energy efficient. Yes, It uses less water to wash a load of clothes. Problem is, it takes twice as long to wash a load of clothes as older models. If it uses twice as much electricity, In what universe can this be considered energy efficient?

We bought Cabrio washer & dryer a year & half ago, and I hate, hate, hate the washing machine. Every load, it goes off balance. And you have to stop your other work, unlock & wait awhile on that, and rearrange your load of clothes. I called the repairman when I first had it, and he said, Oh yeah that happens, nothings wrong. OMG! How I wish I had returned it. If you dont rearrange the load when the cycle is done, your clothes are still soaked. So you have to re-drain & spin. Total waste of money & a lot of my time. Very very dissatisfied and will never buy another Whirlpool product.

Doesnt wash clothes properly - often some items of clothing just dont get wet. After 3 years the whole main bearing in it failed, causing unbelievable noise and constant overload faults. All Whirlpool top load washers have this critical design fault where water leaks into the main bearing (the bearing is an unsealed type with a cheap grommet seal) and then after a year or 2 the bearing starts to cease and the machine overloads itself trying to operate. Replacing the bearing means pulling the whole machine apart - and with a cheap press-fit bearing like this, special tools are needed and it will never operate smoothly again anyhow. In any case in 2 years, the faulty bearing seal design will let water destroy the bearing again. Effectively it is not repairable. Sounds like class action to me. So, it became an $1000 paperweight and I bought a new Samsung unit. I assume the Koreans know how to design bearings and seals...

The dryer is okay but the washer is no good. Doesnt save water because clothes have to be washed twice. Sometimes thrice to get them clean. Cycles are longer therefore more energy used. More water, more time, more energy. Terrible design. Useless piece of junk.

We purchased a Whirlpool water heater at Lowes for $1100.00. Four years later it isnt working. There are no parts to fix it available at any store in Dallas, TX. We had to call the company. They made us pay the overnight shipping fee for the part. Then the part didnt show up. When we called to find out why isnt the part at my house, they said they found out FedEx doesnt deliver on Saturdays. No one ever called to notify us of this, instead the response was that they would use it as a coaching lesson for not notify the customer. We have now been without hot water in the middle of winter for 5 days. We have no idea when the part will arrive and if it will even fix my defective water heater. We will never buy another Whirlpool product and I strongly encourage anyone who reads this to not buy Whirlpool. They dont stand by their product and have horrible customer service.

No response from Whirlpool, but I did find out what the rust was. Instead of using stainless steel or plastic or rubber, the inside light frame is made of a cheap metal that has rusted and is literally falling apart, sharp and very rusty pieces were falling into the washer tub. No wonder I find holes in the clothes that werent there before washing. I removed what I could, including the part it should hold, a plastic plate that covers the light, protecting it from moisture. My husband covered it with electrical tape to prevent injury and possible electrocution. I contacted Whirlpool, but they have ignored my questions and have not answered. They do not have a replacement part for it (stated on their parts website) They give you no solutions to a problematic appliance that should have been recalled and taken off the market due to safety issues that have caused injury and possibly worse.

Whirlpool provides free replacement parts to repair this design problem but wont pay the service charges to repair their design problem. I purchased a KitchenAid french door style refrigerator (KBFS25EWMS10, SN K31902118) and it leaks water on the kitchen floor. At first I just mopped it up but later discovered they have a design problem in their drain system and water backs up into the freezer dept and eventually on to the floor. Customer Service provides free improved replacement parts for this design problem but wont pay the service charges to have the parts replaced. Simply put, Whirlpool/KitchenAid do not stand behind their product quality, instead they pass the problem and service charge cost for their design problem on to the consumer. Beware of this appliance supplier!

We bought a Whirlpool microwave model # GH7208XRY4 at the Habitat For Humanity store. It was brand new still in the unopened box with the warranty card in the box. The box was undamaged and in perfect shape. We loved this microwave until six months later, it started to throw a code F6 and wouldnt work - it wouldnt turn on or off and we couldnt use it at all. Since this is an under the cabinet model, it was a little hard to uninstall it as its a built-in. I called the customer service center and they dont cover it because the ordinal purchase date was 2012, we bought it in Oct 2014. I guess someone bought it in 2012. They say that since the ordinal purchase date was 2012, they dont warranty. They also said because I had bought it from the ReStore, it was a donated item and would cover it. I told them the box was unopened and it worked for several months, so their stand was it might have been damaged when I bought it. Again I told them it worked for 6 months, so how could it have been damaged when I bought it? They were very unhelpful.

After 1 1/2 years, My new Cabrio washer lid hinge started to come apart and wont latch, so machine wont run. After a day or so it completely popped up and out of align. The lid has PLASTIC hinge. This is obviously a problem. We have been in touch with Whirlpool, but they say they cant help?? This should be a recall. We have been waiting on back order for a replacement Lid at OUR OWN EXPENSE since Sept. 20, 2015. I want to get this fixed and use my Machine again. We are Senior Citizens and this machine is used 3-4 times a week. Not abused.

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

My dishwasher quit drying and washing in hot water at Thanksgiving 2021. I could not get someone to look at it because the repair company (for Whirlpool) could not get to it until January 2022. The repair tech said it was it could be three different things. He was going to order all three parts. Three weeks later, they came to repair it. It still didn’t work and I hate to wait two different days (all day) for service. First day, he didn’t make it so had to schedule for next week. He replaced the other two parts. It now works by still doesn’t dry like it should. Not thrilled with performance at all!

I purchased a new home in 2005 and equipped the kitchen with Whirlpool appliances. Every single appliance has broken at least once. The refrigerator ice-maker has been repaired once and replaced twice. Some of the control panel buttons on the dishwasher work some of the time. Other times we have to strike the panel to make them work. Weve had to replace the handle on the microwave door twice at nearly $50 a pop. And the motherboard on the dual-oven has been replaced once. I will NEVER purchase another Whirlpool appliance for as long as I live.

I thank the folks at Whirlpool for building a washer (Cabrio tub bearing failure) that lasted 22 days just shy of four years, better than the Whirlpool Duet that lasted 14 months, tub bearing failure also. Now I have high confidence that Whirlpool pre-engineers failure into every washer they build.

I purchased a Whirlpool Microwave on 9/21/10 from Hamilton-Bryan in Wichita Falls, Texas. I had a small fire in my microwave on 9/19/11, due to a faulty mica board. This was replaced by Mr. Bobs in Wichita Falls, TX, under the warranty. Then on 1/9/12, the microwave would not warm anything. I called Mr. Bobs again, and they said the transformer was out. I called Whirlpool, and was told by Yvonne that Whirlpool would replace the part only, with no labor, but Mr. Bobs was closed, and to call back in the morning, so this authorization could be set up with Mr. Bobs. I called back and there was no record of my call with Yvonne. I talked to a supervisor Rachel in Tennessee. She put me on hold for a while and finally said she found Yvonnes note to authorize the part. I explained to each person I talked to that I was dissatisfied with Whirlpool. I believe I have a defective microwave. I would like my money back, or a new microwave. I believe the defective mica board is related to the defective transformer. I am a very dissatisfied customer. I have used Whirlpool most of my adult life. I have used them since the 1970s. I currently have a Whirlpool refrigerator, washer, and dryer. A similar situation like this occurred when I bought a Samsung washer. I was dissatisfied, and Samsung refunded my money, and I bought a Whirlpool washer to replace Samsung. I will not be satisfied with this situation, until the microwave is replaced. Thank you for your concern and attention to this matter.

Five years ago, I decided to splurge on a really nice (expensive) over-the-range microwave during a complete kitchen remodel and had the Whirlpool Gold Velos Microwave GH7208XRS installed, thinking Whirlpool would be a reliable brand to replace our 18+ year-old (still working) Kenmore countertop model that we had used previously. About 4 months ago, after a couple of mysterious cases of the control panel going haywire (turning on by itself in a different modes), it started pouring smoke out the top and service was called and the magnetron and inverter were replaced to the tune of $482.Fine, things happen. Yesterday, while opening the door, the handle snapped off and (upon closer inspection) I noticed cracks around all sides of the door frame - see photos. After reading about similar complaints about Whirlpool microwaves on this forum, I really feel that this is a defect in materials and should be recalled or at least addressed by the company if they want to maintain their reputation. Right now, I am waiting on their authorized repair service to see what my recourse will be.

I have owned a Whirlpool Cabrio model no. WTW7800XW2 washing machine for less than 3 years. The plastic frame for the top glass lid cracked (on the right next to the spring loaded hinge). After reading that other people have had a similar problem, I contacted Whirlpool about this and talked to its TN call center representative. I requested that Whirlpool repair the appliance free of charge since there is a known defect with it. She said Whirlpool would only offer me a 50% price reduction from the retail cost of the lid plus charge me shipping and taxes. I will not be buying another Whirlpool product as a result.

I purchased a Whirlpool over the range microwave (model #YWMH31017AS-1) in April 2013, and had it installed in August of same year. It worked fine up until November 2014 - just over one year later. Everything on it works, except for the most important feature - IT DOESNT HEAT ANYTHING UP. Doesnt matter how long you set the timer for - the contents come out stone cold! I called Whirlpools 1-800 number and was told that because I did not purchase the extended warranty, I was responsible for all parts and labor costs. I find this completely unacceptable! I have had cheap $70 microwaves that have lasted 15-20 years. I will never buy another Whirlpool product, and am telling everyone I know to do the same!

Our Fridge has totally died at 16 months. The warranty was only one year. The customer service folks said online they might help, but we did not receive any response after two emails sending the make and model and serial number. An expensive fridge should last longer than this!

I purchased an extended warranty with my product purchase and only a year and a half into using this brand washer the lid broke on one side at the hinge, it looked really rusty and like others I thought I was making a very decent purchase because all of my previous appliances were Whirlpool so figured Id keep up with the brand. Sad to say that was the worst decision I could have ever made for 13/1400 dollars for a washer with a light inside. Never again. They wouldnt even keep up the warranty because they said it was too expensive to repair it. Whirlpool is very bad for business...

As part of a new home purchase from Pulte, the combo oven/microwave can with the house. After one year of usage, the oven liner started the pile and crack. We have a two year Whirlpool warranty through Pulte our builder. When we called the dedicated line for Whirlpool-Pulte to report the issue, we were told that Whirlpool must send a technician to take pictures and see what is going on. The technician shows up and declares that the oven is damaged and repairable. But Whirlpool reject to replace the unit claiming that this is a cosmetic issue and it must have been reported to them within 30 days from buying the home, as this is their policy for cosmetic issues.We did some research on our own and we found out that Blue color liner ovens have a well known issue, but Whirlpool keeps putting these into their products. Our builder is not able to get them to replace the unit as well. I will not ever buy any of Whirlpool products. Be aware if you want to purchase any Whirlpool appliances, warranty to them means nothing, even when they know that they are shipping products that have faulty into consumers.

I purchased a Whirlpool Gold side-by-side Refrigerator on June 15, 2013. The freezer works fine but the refrigerator does not feel that cold and when I put a thermometer in there, it reads 42-43 deg although the refrigerator is set at 37 deg. The tech was just here and told me to put a thermometer in a glass of water and read it again. His thermometer read 46 deg when reading a bottle in the door although he explained that he had had the door opened for a while during his visit. He said his reading of the bottle upon opening the door was 36 deg. I do not believe that. I just measured some bottled water temperature and it was 48 deg. I have a hard time believing the temp went up 12 degrees and he has been gone for a half hour. My food is cold but not like you expect from a refrigerator. My bottled water and soda, etc., are not very cold. The worst is the water dispenser. That water is barely cooler than tap water. There is almost no difference. The water temperature has been in the 60s when Ive measured it. The tech says the first glass wont be cold (have never had that with any other refrigerator) but even if you get the second and third glasses of water, they arent any colder... maybe a couple of degrees. If anyone else is having this problem and Whirlpool will do nothing, then Im interested in legal action.

We purchased this Whirlpool washer 5640XW3 from Lowes. It doesnt clean the clothes. Even if I run them through a second wash cycle, the clothes are still not clean. Called Whirlpool and they said nothing is wrong with it. I use HE detergent and load clothes around the agitator as directed in the manual. Still, clothes are not clean.

I purchased a Cabrio washing machine and discovered multiple repair issues over the last few months. I have had to replace a pump for $85 and now the machine will not complete a cycle. I found out the the whole thing is rusted above the barrel which is causing a leak in the back and leaving our floors covered in rust shavings. From my research and reading others reviews and issues, they pay for a serviceman to come out and still it does not solve the problem. My husband is a student in college and we are living off student loans. We bought this machine because we trusted that a Whirlpool would last and be a good investment. I am very displeased on this machine and doubt I will ever put my trust in Whirlpool again. I called to complain and got the typical response I have read others got. I am not paying for a service call when it will not fix the washer in the end. I plan to file complaint after complaint and encourage any class action suit against Whirlpool for producing a poor washing machine and misadvertisement on this machine. I will move forward in this. I feel that as consumers we have a right and should have a sense of ease when you spend $900 on a product that it should work and not give out as it has so quickly. If there has been multiple people with common complaints, then there should be a recall on this washing machine.

I was so excited when my husband bought me this as a gift this past year as we are a family of 6 which means lots of laundry. The first few months I assumed it was operator error trying to learn how the new one worked. Well here we are months later googling why it makes my clothes dirtier coming out than they were going. It leaves black linty looking streaks on all my white clothes, both inside and out and leaves white linty looking streaks on my darks, also both inside and outside. It DOES NOT REMOVE PET HAIR AT ALL! If you purchase one, and have long haired pets that shed, expect to invest in some lint remover. Im on my third type in an attempt to save me time. I will say OxiClean laundry detergent seems to be the only detergent that actually cleaned the clothes. Sadly, stores around here stopped selling.And whatever you do, DO NOT USE LAUNDRY PODS. It DOES NOT DISSOLVE THE HOUSING AND LEAVES SLIMY RESIDUE ALL OVER YOUR CLOTHES. I believe this is due to the fact that despite the setting, it uses little no hot water. Which would be great if it actually cleaned your clothes. I could run my clothes under a faucet with no soap and they would cleaner than this pos. Bottom line. Dont waste your money and if you do keep your expectations very low!

Cleans average compared to previous dishwashers. Does not dry well even on high heat dry. Cycle takes about two hours and I have to run it during the day because it is too loud. The price was good, but I wish I would have bought a little higher grade.

I have had my Whirlpool gold series dishwasher for approximately 10 years and it still does a great job washing my dishes. Recently, I found out if I forget to put a dish into it I would have to start the dishwasher all over again rather than it taking up where it left off. Also, the interior is badly stained and unable to clean it.

Whirlpool Duet pair. Like Whirlpool products and have had good experience with them. Have had the pair for 3 years. Like the way they wash and dry. Clothes do not take a beating. Only dislike is the vibration on the washer. I look for capacity and extra features such as: steam option and extra cycles. Now I also look for noise and vibration. Would definitely like to stay with Whirlpool. Definately cost is important, but for the sake of a few dollars more the options and the brand are something to be considered. Having a steam cycle and wrinkle cycle are important in any dryer.

I purchased a side-by-side Whirlpool refrigerator less than three years ago, but about a year ago we discovered it was leaking from the freezer thats located on the bottom. Initially we thought that if we simply defrosted the sheet of ice that formed on the bottom of the freezer - it would stop the leaking. Its hard to keep up with - I checked into it on the Internet and discovered that there is a clogged drain hole that is causing the leaking.Apparently, a number of people are experiencing the same thing. I called Whirlpool (since our local repairman suggested we contact them because this is a chronic problem and is likely to happen again). The customer service person kept pushing me to buy the extended warranty with their repair that will cost nearly $400!!! Without it - it will cost nearly $200 that doesnt include any parts. Its a new refrigerator, very bad quality and theres damage to our kitchen floor, and then Whirlpool wants me to pay $400 to repair the mess they made! VERY UPSET...

I bought my Whirlpool dishwasher, model #WDF560SAFMO in Nov 2016 with a 2 year extended warranty. In Jan. 2021 it quit working, was told by repairman that the dishwasher needed a new pump. Of course, it is no longer under warranty. To replace the pump will cost almost as much as a new dishwasher.

Worst company for home appliance... I got my fridge repaired from an authorized service person and next day it again stopped functioning. Upon calling the service center again, they said that few more things needs to be repaired once again and for that fridge needs to be moved to their workshop and for that they will be charging 1600 Rs again. Upon asking for the refund for the useless spare part, the rude service person said ek din k liye to chale tha na fridge, fir kis baat ka refund... Such a ** company is Whirlpool that they are not entertaining any complaint on their all India customer care number...

I purchased a Whirlpool washer (WTW4800Q) in November 2011. Already, it has rust in the tub. The warranty does not cover this. I never really liked the thing since I have had it. It takes much too long. Lid locks and then starts over. Also, warranty is not good. I wouldnt ever buy their product again and suggest no one else should either. I loved Maytag before Whirlpool bought them out. Im putting this one on Craigslist and buying a real washer, a Speed Queen! Yes, Speed Queen has all metal parts and makes a home washer. Just have to find a local dealer. They are there.

This is one of the best washers I have had 4 years now. The spin cycle is great. Feel almost dry when done. My daughter was going to order this set but cant get them anymore. I guess it is because it is too good of a washer.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

After 32 years of marriage and nothing but Whirlpool (because my mother swore by Whirlpool), that is all we have used. I am so disappointed in the Cabrio washer/dryer set we purchased at Lowes. After 18 months, the dryer just quit. The best part is, we hang clothes out most of the time. It was used one winter, $1400 wasted. We put a cheap Admiral in our second home and spent $500 total and they work fine. I will never ever purchase Whirlpool anything or recommend to anyone. Again, you lost a family tradition.

We have never had problems with our old Kenmore appliances. Since we have had the Whirlpool complete set we have had problems with both the Refrigerator and now the Stove. The fridge had already been re-engineered by the time the repair man got here but the fix didnt work. We had a 50 degree refrigerator for over a month. Now the stove wont keep a constant temperature so we wait for the service man once again. They look beautiful but they are the worst we have owned over our 36 years. They obviously have engineering issues looking at all the other reviews. I dont see us purchasing another Whirlpool appliance in the future.

Im happy with my 9 year old purchase. They are front loaders and they sit too low for my comfort. The available pedestals cost hundreds of dollars for a pair...that I do not want to spend. I have not had any repairs needed.

I had the bearing go bad in the tub after a few years of service. It cost hundreds of dollars. As an engineer, I look at this and it is a design made to fail. The seal design is inferior compared to old washers that had a shaft seal made to be on a spinning shaft. This is a rubber lip seal that is going to wear because it is using washer as a very bad lubricant! When the seal goes bad, and it will, the water runs down to the bearings and destroys them, and you have the replace the whole tub as a $300 part!