I bought a Whirlpool microwave oven last year.The last one year, it has worked fine. The day after the warranty period was over, the microwave oven is not working .The rotating part is not rotating, so I called your customer care center. They sent one guy to trouble hoot, he said that the rotating part is faulty and I need to spend around Rs. 3,500.00 to rectify the problem .The cost of the microwave oven is Rs. 6,500.00.How can I spend Rs. 3,500.00 to rectify the problem? That too, how it happened the day next to the warranty period. Now, I have a doubt that as I purchased the article in Saravana Store T Nagar/Jayachandran stores in T Nagar, whether I am getting such kind of problem. Because when I purchased, they gave me a lot of gifts. That time itself I suspected.I trusted Whirlpool Company. I heard that Whirlpool Company is good so I purchased a double door fridge 5 years ago. The same problem I had when I purchased the fridge, the day next to my fridge’s warranty period, it happened to me. That time, I did not think like that. But now, the same problem happened to my microwave oven. So, I am suspecting about the genuinity of the Whirlpool Company. I am totally dissatisfied about the product of the Whirlpool. I will give you my microwave oven. You take it freely. You can use my microwave oven for your demo purpose. So that in the future no customers will have problem which I had. Do reply to this mail and let me know when you are going to come and collect the article.

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

In 2008, we also bought a Whirlpool 40 gallon gas hot water heater with flame lock, Model #BFG14040T3NOV. We too purchased from Lowes. The plumber was here yesterday to replace the thermostat for the third time in 4 years. We also suffered through cold showers, warming water for dishes and sponge baths. We are in our 60s and are worn out arguing with these people. If there should be a class action law suit, you can count us in. It is not right to have such a faulty product out there by Whirlpool. This is still America, right?

Whirlpool Cabrio Washer - A total waste of money. My clothes are never clean. The low water system is rubbish. It doesnt work! Check out my pictures below. That is the result of a 63 minutes wash cycle. Dont buy this piece of crap.

Dont buy. Purchased over the range microwave. Service order less than a week after install. Heats unevenly. Burns center of bacon consistently without fully cooking ends. Popcorn pops half the kernels yet Whirlpool says nothing wrong with product. Well within 1 year warranty but had to pay for service call cause Whirlpool determined microwave was operating as manufactured. Laughable! This company does not stand behind their product or their customers. Never again will I purchase a Whirlpool product.

Clothes come out of washer are soaking wet. Despite multiple repairs within the warranty period (1 year), the problem was not fixed. Each time a separate part was replaced. I would consider this as a manufacturer defective product. Despite multiple complaints to Whirlpool customer service, they would not replace the unit. Problem continues and now the warranty period is over and I am paying for fixing the same problem. I would not buy a WP washer again.

I purchased this washer about a year ago and have been dissatisfied with its performance since Day One. It takes a long time to run a cycle and has not saved me any water or electricity. I always have to add a second rinse because it doesnt get the soap out (using the recommended detergent) with the regular cycles. Sometimes it doesnt get my clothes clean.Today it tore huge holes in the front and back of one of my very favorite T-shirts, which was a very meaningful gift from a very good friend. This was due to its tangling the clothes even more tightly than it usually does; the tangling process was what tore the material. I always take pains to load the machine in the manner instructed, to put the clothes in loose balls around the outside of the drum, but nevertheless it can take me several minutes to untangle my laundry before I put it in the dryer (also a Whirlpool -- just waiting to see how it disappoints). If I had read the reviews here before I selected my new machines, I would never have purchased the Whirlpool washer or dryer. I certainly never will purchase Whirlpool machines again.

Sounds crazy, but the outside of my stainless steel door is all dented. I live alone and one day noticed that it looks like someone body slammed my fridge. Is there air in the door panels that could be escaping or something like that? Anyone hear of this?

Works fast and quietly. Easy to set up. Get the geek squad coverage and clean the filter at least monthly.

Bought a Whirlpool fridge in a package from Home Depot three years ago. The fridge has already stopped working. It started having issues about 1 1/2 years in to owning the fridge and finally died 2 weeks ago.

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

We purchased a Whirlpool Accubake Drop-in Stove (Model # RS675PXG015) on 10/21/2006 from Lowes Companies, which cost $1,100.00. In 11/2012, we had an error message E1-F2, and we tried everything to get it to clear - all suggestions given by electrical repairman who does repair for Lowes Cos. The stove is porcelain, which also has problems of staining that cant be cleaned. We were told the repair would cost $200 for the panel, and if that doesnt work, another $400 for the other panel. In reviewing other complaints for this Whirlpool stove, there are enough complaints to recall this item or at least give deep cuts for the parts to repair this stove. We have purchased other Whirlpool items, and this one is not well made and too costly to repair. It should last at least 15 years or more. Cant Whirlpool do something about this obvious problem?

This washing machine was already in the house when we purchased the house two years ago. In those two years, it has performed well for the most part. It has many different cleaning options, the clothes come out clean, it saves on the amount of water it uses, it’s quiet and I like the fact that it is a front loading washer.

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

The door broke down twice and taking months to repair. We bought the model WMH53520cb in 2017 April and since then we had issues with the door. Even the door is closed the microwave doesn’t turn on. The latest issue happened on Jan 2018 and still not been repaired. Seems like they are waiting for my one year warranty to expire.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

This Maytag dishwasher is awful. The parent company is Whirlpool and their customer service is as bad as their products. I bought this dishwasher and less than a week later the pump isnt working and stagnant water is sitting in the machine. It took Whirlpool 3 weeks to replace the machine and they sent over another defective machine. This time it lasted less than 2 days. The Whirlpool customer reps are rude and vindictive and antagonize the customer with their lack of service. Called corporate office with no help from Cust. Service and was told to leave a message with the operator and await a callback. With this fiasco I wouldnt buy another Whirlpool or Maytag product again. BTW. Im still awaiting my callback from the corporate office... Im not holding my breath. I called the company that I bought the dishwasher from to see if they can help me unload this machine and get a different brand...

GFG461LVT2 - In October of 2010 I purchased a Whirlpool Gold Fridge and Stove. Its been about 3.5 years and two of the caps that go on top of the range burners are chipped. All of the caps are badly stained and despite the manual instructions to wash them in mild soapy water, they do not come clean. They dont come clean using heavy duty Easy Off cleaner. In addition, the seal on the oven door has apparently failed because the glass is foggy on the inside. Today I phoned Whirlpool after going to their website. I first spoke to a parts representative who advised that I would have to pay $47.00 per cap or $115.00 for all five burner caps. I was transferred to another department as I thought I should get the appliance parts and door fixed for free. The appliance is only 3.5 years old. I was told that the appliance is only guaranteed for 1 year and I would have to pay dearly to remedy the two problems. This appliance is Whirlpools Gold series. It supposed to be top-of-the-line - the price tag was certainly top of the line. Im very disappointed in American workmanship and the companys lack of integrity. Not too long ago I purchased a Whirlpool (aka Maytag) front loading washer. I now own a Samsung. The point is that designed obsolescence will force consumers to purchase products made outside of the US because some of us cannot afford to buy or repair appliances, cars, etc., every couple of years.

BFG2F4040T3NIV IS HORRIBLE. This water heater is JUNK. The release valve has released and flooded my basement 3 times in the past 2 years and the recovery time on water is terrible. Whirlpool needs to step up to the plate and refund everyone who purchased one of these. Every review on this unit is horrible. DO NOT PURCHASE a WHIRLPOOL water heater!

The silverware comes out all spotty and water stays inside cups and on dishes. I am going to have to replace all my utensils. They are so spotted that they look filthy. Knives, forks, spoons and all serving utensils. I have used this brand new Whirlpool dishwasher from August, 12, 2016 to today Oct. 21, 2016. I am very upset.

I purchased a Whirlpool Duet washer from a local appliance store in May 2009. I also purchased a 60-month extended warranty covering the washer until May 2015. I was shocked when I tried to use the washer today (May 16, 2012) and it would not turn on. I called the repair facility the appliance store supplied as the warranty repair facility, only to be shocked again. I was told the appliance store suddenly went out of business and my ($130) extended warranty was no longer in effect and I would have to pay for repair out of my pocket. I then called Whirlpool knowing they would stand behind their faulty $740, 3-year old washer. They told me there was nothing they could do because the one year warranty they offered was over. I had a repair person look at the washer and he told me a control board had to be replaced and the repair would cost at least $550. I told him I was just going to buy a new washer. I had not been happy with the washer from day one and was very sorry I had purchased it. It did not wash the clothes very well. Also, I had a musty/moldy smell in my basement that would not go away no matter how much I cleaned. The repairman told me today that the smell is coming from the washer. I just cant believe I am out almost $1,000 and there is nothing I can do about it. After reading the many reviews on this website about Whirlpool appliances, I am sure they will not be in business much longer. They should be ashamed of themselves for what they are doing to consumers like myself especially in todays economy. Is there anything that can be done about this?

I have been extremely dissatisfied with the Whirlpool Cabrio washing machine!!! I tried to take it back and Lowes would not let me return it because I had had it for 6 months. It doesnt put enough water in the machine to get all of the clothes wet. It doesnt get the clothes clean and it leaves some kind of lint residue all over dark clothes. I am only able to put in 1/4 of the clothes I put in my Maytag washer which I loved, but it wore out. I am also short and it is so deep I have to use a stool to get up on to reach into so i can reach the bottom of the machine. Even though it is a huge tub, I can only put a few pieces of clothes in it to get it to clean the clothes. It is a very poor design and needs to be recalled!

Whirlpool Cabrio - Worst washing machine I have ever had. Unbalanced when washing sheets, towels. It does not matter if one sheet or two. I will never buy another one like this again. I would be better off having a twin tub for the amount of time I spend in the laundry to fix this machine when it bangs, bangs because it is unbalanced. HATE, HATE, HATE it.

We bought the dishwasher as part of our major kitchen remodel. After 1 year, 10 months of successful operation, the wash motor failed. We are now faced with paying about 1/3 of the cost of a new unit, after less than 2 years. I dont expect new appliances to last forever, but less than 2 years is ridiculous. I would definitely not recommend this product to anyone.

Washing clothes is a nightmare. I am constantly removing clothing from the washing machine that have been torn and left with holes. I am utterly frustrated. Because the machine is more than three years old, there has been no solution to my problem. I have now replaced clothing items in excess of $2,000. I am always here that they will send a repairman and yet there is still the problem. This machine is costing me too much money. The newer machines have fixed the problem. There is no gap between the drum and the doorway or rubber piece. I want that piece to stop this nightmare. This machine has taken a dream of mine and demolished the experience. I hate washing clothes but more so having a machine at home and then going to the laundromat to stop the chaos with doing laundry at home.

Whirlpool French Door 32 Cu. Refrigerator - Purchased refrigerator Nov 2016. Never worked, never cooled. Called Sears and was told to call Whirpool. Had to then wait 1 week for repair company to send out service tech. He determined it was unrepairable. A replacement was delivered. The replacement started flooding the interior down the back, filling underneath the bottom drawer and down into the freezer (ruining everything in the freezer) and out onto the floor. Called Whirlpool and had to wait another week for a tech. They assessed the problem and left. I was told it would be fixed within the week, that theyd call when the parts arrived. 3 weeks later, no word. Called Whirlpool, the parts were on backorder with no ETA. Two weeks later the parts were expedited, after I called again crying, and a tech came out again to fix the flooding. Two weeks ago the fan started to make a very loud noise and the internal temperature started to fluctuate and finally settled between 55-60+. Everything was ruined, again. This refrigerator is defective. Whirlpools customer service is deplorable. DO NOT BUY ANYTHING FROM WHIRLPOOL!!! They dont care that they make and sell defective crap. They dont care about how much money and time youve lost because of their defective merchandise. You have to have a service repair person come out at least 3 times before theyll even consider a replacement unless the repair tech considers it unrepairable even if it never really works or if the parts take weeks to be delivered. They DONT CARE about anything. Worst part is that I have no power or recourse. No one will help me. I was told today by the Sears Customer Relations to hire a lawyer. :( This is so wrong.

2010 upright Whirlpool freezer - Door is totally bubbled in rust. Warranty Plan not covered for this. Whirlpool Corp Serv. Dept said they are sorry but it is not a functional problem. Cost of repairs on 3-yr-old freezer that cost $600.00 would be $732.62. This freezer was rated CR Best Buy in Sept 2009 which was why I purchased it. I paid $81.00 for repair tech from Whirlpool today who could do nothing either. Whirlpool knows that this has been a problem as consumers have complained about this rust in Google, some saying they will never buy a Whirlpool product again. Same here!

I was so excited for this stove top and oven - Whirlpool Gold AccuBake (especially at the price we paid for it!). Weve owned it for 13 years now, and in that 13 years, we have had to have the computer replaced 6 times now. The latest replacement being last week (Friday). The oven is still making clicking noises like the igniter wants to start and it is frustrating and annoying. It will do this for a 3-hour stretch numerous times throughout the day and night. Had a repairman here last week and he replaced the computer AGAIN! But the igniter clicking noise continues.

First of all, I did not want to give a rating of one. Your system forced me to. They do not even rate one star.In summary of the below, I did not fail to communicate from the moment we received our appliance and Whirlpool in short intentionally wasted time to let the warranty run out to avoid replacing a lemon of a dryer. Please read details below.We bought our new dryer (model WED9400SZ) on 10/24/10 with a one year service & parts warranty from Appliance Smart in Apple Valley, MN. In March 2010, we called in to Whirlpool customer service to relay our issues & to arrange for service & repair after a few months of noticing holes in our clothing (at first thinking it was the new Whirlpool washer making the holes).Although we purchased the unit in late October, we didnt use it for the first time until late November (1 month later) as we just bought our home & took four weeks to paint the entire home before moving in. Then on December 29, 2010, we left for a three week vacation to Mexico & again hadnt used the dryer during that time. Returning home, we started to use the new washer & dryer (in late January 2011) but had thought it was perhaps the washer making the holes & it took us until to March for Whirlpools preferred service repair providers to determine that the holes were coming from the dryer. I do not have a reference number to refer to for the complaints to Whirlpool as I was not provided one.They only always asked for our delivery address which is: xxxxx ****, Lakeville, MN.The issue of the dryer making noticeable holes in our clothing and in one instance chopped a sock completely in half (both pieces found within the dryer drum not stuck behind the drum or sucked into another area of the dryer) has been consistently ongoing and to date has not been fixed. On several occasions, I expressed my concern to Whirlpool customer service as well as to managers (because the case had been elevated to where they had managers and review boards looking at the problem more closely) as we were getting closer and closer to the warranty expiration and the dryer had not been fixed. Routinely, I was told that regardless of the warranty expiring, if its the same issue that persists and had not been resolved while within the warranty date, they would continue to honor the warranty by continuing to try to fix the problem or replace the unit at no additional cost to me if necessary.Whirlpool had escalated this repair issue (multiple times) to their review board and determined that the dryer was indeed repairable and continued to send out Twin City Appliance to repair it. Finally, just 23 days out of warranty, Whirlpool deemed the dryer should be replaced, but at the cost of a new machine $370 to us (which they somehow prorated to get that figure). We paid $399.98 plus tax for our supposedly new dryer so clearly this is an unexcitable resolution. In speaking to Rhonda this morning, she further prorated the new dryer replacement cost to $260 to include installation and another one year warranty and gave us until December 21, 2011 to take advantage of.This product never worked from day one (a lemon) and has caused roughly $400 in damage to our clothing (all photographed for proof). This has further resulted in me missing work to let in repairmen & and taking great amount of time to lay out out wet clothing around our house to air dry (again, all photographed. ) This has caused extreme stress for me in spending hours and hours on the phone with Whirlpool and repair people (cell phone records of dates & conversation length as proof). I have also developed great anxiety attacks in using our dryer, scared at the outcome of which of our clothing will be ruined. After having two different service repair companies (A&E Factory Service and Twin City Appliance, both in MN) at Whirlpools insistence come to our home on more than 10 occasions within the year warranty to determine the cause & try and repair the faulty machine, this proposed resolution by Whirlpool is absolutely unacceptable. It is important to me as a consumer the this issue is formally filed with a reputable institution (BBB). I feel we have no choice at this point but to contact our lawyer and take this issue up in the courts. Resolution proposed:I am seeking a replacement of our dryer at the equivalent or greater value than the model we purchased and a letter of apology from the CEO or equivalent position in their corporation as I want to know that this poor level of customer service provided by their company was indeed brought to their attention. I am also asking for $400 to replace our damaged clothing. When this goes to court if not resolved via the BBB, I will ask for pain and suffering damages as well.This has been an unbearable chapter for our family this year, one that has weighed heavy on us and caused great stress, anxiety and loss of money and time. I am in shock that a worldwide corporation with the longevity and commercial history and quality service that Whirlpool was known for cannot admit that this lemon we purchased is a (most likely) rare instance and step up to the plate and demonstrate integrity and show value for their customers by doing the right thing. Time after time their customer service reps promised I had nothing to worry about and that if the machine could not be fixed even if it fell out of warranty, they would take care of the replacement of fixing it at no additional cost to me.

I like the looks with brushed stainless steel and black. The most difficulty was getting someone to help get it and load it. But other than that, Ive had no problems with the dishwasher.

We purchased the Whirlpool refrigerator on July 9, 2012. Refrigerator was replaced on August 23, 2012. Since then there have been many, many service calls. I wish I had kept records to be able to tell you exactly how many times, but we purchased an extended warranty. From memory, I can tell you the ice maker has been replaced twice, new doors have been installed for refrigerator and freezer (replacing ice maker a third time), then within the last three months the freezer door was again replaced (replacing ice maker a fourth time). The gasket on the freezer door has been replaced. At one point the refrigerator was colder and freezing and the freezer was not freezing. Parts and pieces have been repaired on several occasions. The inside of the freezer door next to the ice maker is still frosting up and yet again the ice maker is not functioning and needs to be replaced a fifth time. In other words this Whirlpool refrigerator has been a lemon for us. Finally, we figured it out. There is a fairly large gap at the top of the freezer door between the case and the gasket. If you run your hand across the area where the gap is, there is definitely a dip in the face of the refrigerator case where you can see the top of the ice maker. A picture showing the gap is attached. I am not sure that our purchasing a store extended warranty was fortunate or not. My husband has insisted on repairing this thing over and over and over because of the extended warranty. I think repairing it is futile and the only people being punished by all the repair calls is us because we frequently do not have ice, we are losing food because of freezing or not freezing or cooling or not cooling as the case may be. Thank God, the warranty expires in July and we can repair this Whirlpool by replacing it with another brand -- not in any way associated with Whirlpool. If you Google Whirlpool, you will find that Whirlpool is affiliated with almost every other brand of refrigerator and really limits your choices. Based on my experience with this Whirlpool refrigerator, I will never purchase another Whirlpool or any other brand associated with the Whirlpool brand. The myriad of repair persons in my home probably find a Whirlpool refrigerator is job security for them.

I bought a Whirlpool refrigerator water filter from the Marcone distributor. This distributor, whose name I received from calling the 800 number in your manual, did not send instructions on installation. I called Whirlpool and they did not have instructions on installation. The product is 4392949. In talking with your customer service department filters, I learned that the young man knew nothing about filters. He told me that the filter that I purchased was the wrong one. Its interesting that he tried to convince me without knowing my refrigerator model number. I asked if he wanted the model number and he said, yes, please. It was very sad how I had to do a song and dance with an idiot. I had no help from your company. I will return this water filter because I was not provided instructions for installation. Neither can your people produce them. For this reason, I will never purchase Whirlpool again.

I have owned a Whirlpool Gold Series Refrigerator for one year and 9 months. During that time I have had 7 repair issues. Each of the past ones took at least two weeks to repair. This past repair has to be redone because the new parts are also bad. The part is now on factory backorder. It will be at least two months for this to be repaired. Whirlpool says its too bad, we just have to deal with being without a working refrigerator for months. Do not buy this product!!! The warranty only means that you are forced to wait months for repairs. They will not replace, refund, or even extend the warranty for all this downtime. You have no recourse with the company.

I bought the new Whirlpool aqua clean last year - they guaranteed me at the store it would clean as I explained having a clean oven at all times was extremely important to me. They assured me I would be pleased with the results. I have never disliked an oven as much as I do this one. The tech came to the house and checked the temperature of the oven as I also complained it was baking uneven (the back was overcooked while the front was underbaked) but the temperature was right on so nothing can be done. As far as the cleaning goes all I can get is a new bottom pan for the oven as I have four years of insurance. Not happy as I would like to have a different stove. I WOULD NEVER RECOMMEND THIS OVEN TO ANYONE.

I purchased this Whirlpool Aqualift oven at now bankrupt HH Gregg so my recourse is limited. I loved the look of the slide in range and the salesman raved about the quality of this appliance. First the ceramic top is a nightmare to keep clean, not mentioned at purchase. The Aqualift feature is totally useless. I use my oven on a very limited basis. Putting water in the bottom of oven does absolutely nothing to clean oven and even less on sides and oven door. I spent a substantial amount of money on this so called self clean oven and I am so disappointed in results. It does not get off even a minimum of spots, I would hate to have something actually spill over. Aqualift does not work and then you are advised to not use anything else to clean it, so what now?

This is the worst washing machine I have ever owned. I have had the Whirlpool Cabrio for less than three years, (4 people I use it for), and it is so loud when it is in the spin cycle, you think a jet airplane is taking off inside your house! Apparently the bearings go out of these machines when you use them! I called the company and all they want to do is sell me an extended warranty for over $300.00 for another year! Not doing that! I paid over $1,000.00 for this machine. I thought it would last a long time! Wrong! Please save your money and get a simple old fashioned one! I sure wish I had! Whirlpool doesnt care about their customers, or they would stand behind their products!

I purchased a Whirlpool 4.3-cu ft top load washer with a stain steel basket, in March 2020. Machine is able accommodate comforters, automatic water level adjust to loads. Washer has an extra rinse and spin feature. Low noise when operating. I would purchase washer again.

We bought a Whirlpool gas range about a year and half ago. The oven started giving lighting problems we had to light with a match every once in a while. Then the broiler igniter started giving same problems so I replaced the igniter, still did not work. Then I tried the control panel, still nothing. The igniters were about 45.00 each. The control panel was 250.00. Then I replaced the spark module and it is now working. Some models the spark module dont control oven and broiler but mine does. That was 200.00. The best thing was the part place I was ordering from would exchange the parts that you try and they also can answer questions either online or by phone, Appliancepartspros.com. My oven model # is wfg371lvs3.

Purchased WRF989SDAM00 French Door refrigerator in 2013, and 33 months later it is not cooling (fridge 45/freezer 36 degrees). Service call diagnosis is a leak in the sealed component area. Since it out of the 1 year warranty period, nothing is covered. This is the first of Whirlpools dual evaporator models, and is technically challenging according to the service technician. Most likely one or both evaporators are defective, and this type of failure comes with a recommendation to change out the compressor as well as it is moisture compromised.As my previous Kitchen Aids had 10 year sealed component warranties, and the Whirlpool is the same base mechanism as the Kitchen Aid, I contacted Whirlpool to see if they would extend my warranty coverage to these sealed components. Website submission - never got an answer. Called the customer service line - they politely told me they were sorry but there is nothing they can offer me. Even the extended service plan would not cover me as this refrigerator has a preexisting problem and it must be 100% operational to begin an extended service contract.Im extremely disappointed in this fridge only lasting 33 months, in comparison to my previous Whirlpool/Kitchen Aid refrigerators. Of course the internet just allows me to see that Im not alone is purchasing a short lived appliance. So here is my contribution to the internet of things: Do not purchase Whirlpool refrigerators expecting them to last much beyond the warranty period. Buyer beware.

I bought a Whirlpool Duet Front Load Washer in 2008 and it began showing F71 and F70 error code in 2011. I paid approximately $1,000 for the machine. The washer wont finish the cycles and often wont start. When I press the power button, I hear the 3 beeps and after a while, shows the F71 error over and over. The information I gathered online indicates that many people have the same problem. The repair cost is at least $550 to replace the user interface circuit board and is no guarantee. This is ridiculous.How could GE sell consumers this kind of junk that fails to work only after 2 years. I had a top loader for 12 years with no problems, not a single repair call. My wife and I are extremely frustrated with piles of dirty clothes and no washer to clean them. I want GE to refund the cost of the washer on a 10-year prorated basis. This is only fair.

The exterior look of the refrigerator (WRX735SDBM00) is impressive and the stainless steel does not show finger prints easily. It has two french doors on top, a middle drawer, and the freezer drawer on the bottom. The interior is 25 cf, but there isnt much space, even with reconfiguring the shelves, and the crisper/meat drawers are so small, that a large bell pepper wont fit. When one French door is closed it pops open the other door, which then does not close back tightly. Although there is an alarm system to warn a door is open, it only works if the doors are open and not just cracked. We have to constantly push on both doors to be sure they are closed tightly, even after washing down the gasket to get a better seal.

I recently purchased a Whirlpool over the range microwave. I especially appreciate the unit's strong exhaust fan. My previous microwave's exhaust fan was much less powerful. The unit's black glass and chrome trim look great! I am extremely pleased with the new microwave.

Model: Whirlpool Professional FF 32 Elite. Purchase date: 06/2009. Problem: Temperature maintenance issue. The basic need of refrigerator - unable to set/maintain temperature. The cooling system is not working! Poor customer service: Representative charged for visit. The representative is unable to find the root cause! Approximate expense of 4-5k with no guarantee of problem being fixed. Better go for other brands like LG, Samsung.

Whirlpool is one of the best appliances I have ever used. They last for years and the self clean ovens come in handy. I’m not to big on the electric stoves, but they are also amazing. Almost everyone in my family use Whirlpool, and we all love the stove and refrigerator. It is definitely a wonderful product.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

Whirlpool Cabrio Platinum Washer - The seal on the top of the drum is breaking down. It is cracking at the bleach and soap dispenser. Somewhere in the washer drum or plate is causing holes and cuts in the clothes. The machine is only 2 years old.

We purchased the Whirlpool double oven with convection to go into our new home 18 months ago. I used the self-cleaning cycle on the bottom oven for the first time last weekend. Halfway through the cycle the control panel went blank. Basically both ovens died, and the bottom oven door is locked. After researching online I learned that this has been an issue with the self-cleaning feature on Whirlpool ovens for some time now. So buyer beware, if you decide to purchase, dont use the self-cleaning feature.

Whirlpool Refrigerator WRF736sdam13. Purchased from Lowe’s June 2015... freezing started in April 2019. Freezer bottom is not draining correctly and the bottom keeps freezing making it difficult to push door close. I have the extended warranty. This will be the 5th time on Monday, July 29 repair person will come out.I talked to Whirlpool and Lowe’s. The product cannot be considered a lemon because the problem continues to be “fixable” as stated from answering service when I reported the problem again. Customer service has been amazing up to this point. Anyone else have an issue with this model with the bottom freezing solid? Any suggestions?

Here is my TERRIBLE experience: After only eight months it started to fail intermittently. Within weeks, it failed completely. I pay someone to come out and look. We get a part from Whirlpool. Pay extra to express ship it. 2 days later, pay to have it installed. Still doesnt work. Express ship another part. 2 days later, pay again to have it installed. STILL doesnt work. Express ship ANOTHER part. 3 days later - it STILL DOESNT WORK!!!!! Then they closed - wait another day. Now they authorize a complete replacement. Wait till Monday to PAY to have this one uninstalled. Haul it upstairs, into my car, back to Lowes, so I can get a new one. Haul it home. Pay AGAIN to have it installed.I was without hot water for 10 days and paid about 4 time the cost of the heater in labor to get through this MESS. I talked with Customer Service to get some help with how terribly unfair this was. Warranty Only Covers parts - should have bought the extra warranty... Silly me - I thought Whirlpool was a reputable and reliable brand. Boy was I WRONG!!! DO NOT PAY EXTRA FOR THE NAME - NOT WORTH IT!!!!!! I also dont recommend paying extra for the Energy Efficient. Its added electronics that just give it more to go wrong. Plain and simple is the lesson for the day!!! And after the hours of frustration with their customer service - Ill NEVER buy another Whirlpool product as long as I live!!!

I am very disappointed in my purchase of Whirlpool High-Efficiency washer and dryer. It does not clean my clothes! I have white towels in my bathrooms, I have them for years. They have always come out perfectly white with the regular washer I had for years. Not any more! They now come out with yellow spots all over them. Dark clothes come out with a white residue on them that looks like there has been a napkin in the wash. I talked to Sears where I purchased it, they said I might be using too much detergent, so I have tried using less to no avail! I hate my washer!

We bought all new appliances, and within a year, the range and microwave are not working correctly and the refrigerator has rust on the doors. We called about the rust on the doors and were told that it is not stainless steel as advertised and rust is not covered. Fortunately, we purchased an extended warranty, which will cover the repairs to the oven and microwave. Well see how it goes. Stainless steel appliances really arent stainless steel, so they are misrepresenting their products to many people.

I bought my Whirlpool Cabrio (washer and dryer) in August 2007 ($1800 for the pair). I love these machines. I have only had one problem with it (I had to have a valve replaced - about $380, the machine made a screeching noise when it filled with water). Otherwise, I have never experienced any of the problems listed above. I bought this machine because I was pregnant and chose to do cloth diapers. I was doing nearly 20 loads a week at one point. Now, I do about 4 loads a week (would be about 8 loads in a normal machine). I love that the tub is HUGE and I can fit 2 sets of double sheets plus towels in one load. My clothes always come out clean and near dry.I wash everything in it - even dry clean only using the hand wash cycle. Prior to this purchase, my clothes were not clean. I could still smell deodorant in all my t-shirts and blouses. Not any more. Its the best purchase I ever made. Although, Ive always wondered why you have to clean a washing machine monthly when... well, its cleaning clothes anyway.

Very reliable. Handle large large loads of laundry. Do not have to prewash any clothes. I will always use this brand.. My parents used this brand while I was growing up. There is no other brand I will use. Thank you Whirlpool!

Whirlpool Cabrio Washer and Dryer - I have had all of the problems that all of the other 900 people have complained about! The washer does not wash anything properly. I have even experienced having something such as a bit of cereal stuck to a dishcloth and it was still on there after a full wash cycle. All of my whites are now grey and stained. All of the sheets end up with a huge dirty ring the size of the tub in the middle of them. Everything comes out in a tangled mess of knots! Very frustrating! Everything comes out smelly as if its been sitting in the washer for days. Nothing smells fresh and clean like it should. Energy wise, we are using two and three times the amount of energy as I am washing and drying things for two or three times over, which brings me to the dryer. I put one single load in and it takes two or three cycles to dry it properly. This is unacceptable and I cannot believe that we cannot get some satisfaction from someone in this regard! We bought our set from Sears and I feel that they obviously know of this problem and still continue to sell Whirlpool products! Weve all been taken for a ride and Whirlpool should be held accountable for ripping people off this way. Someone please help!

The refrigerator is about 2 years old. Has worked great. Stainless steel finish looks great. Was a good price at Lowes, with free delivery and removal of old refrigerator. I bought a simple model. Did not need a water connection.

We have had our Whirlpool oven for 3 years now. They make top of the line products and the oven cooks very well. I have cooked a lot of cakes and cupcakes in my Whirlpool oven. If I had to buy another oven it would be a Whirlpool.

I bought this washer on 2-28-09. By 3-12 the thing took a crap. The whole counter balance broke off away from the drum. This washer lasted 3 years and 1 month. What a piece of garbage. I expected this front loader to last a lot longer than 3 years! Of course when I called Whirlpool they said, “Well its not under warranty so you can buy the 1-yr warranty for $300.00,” and theyll come out and fix it for me. If Im going to pay $300, I might as well buy a new machine! I only paid $600 for it and to last 3 years is pitiful. This is defect in workmanship if the machine breaks in only 3 years. I told her that something should be covered because it should last longer than that. She basically said “oh well”. Oh well, I guess I wont be buying another Whirlpool again. Steer clear of this Duet Sport machine!

l will never buy Whirlpool appliances again, nor do I recommend to anyone. My wall over was 1 1/2 yrs old with a worthless 1 yr limited Warranty. I had Total Appliance from Cleveland do the repair, the only ones I found at the time that would work on this type over with a Digital panel. I think the engineers think we all live in Silicon Valley. Unfortunately the cost to repair after I cleaned the oven for the first time was $384.00 to unlock the door and 2 trips and he had to remove the door to replace 2 fuses so the door and panel would work! Im afraid to clean them oven again..I called Whirlpool and the first wait time was 70 Mins... I put the phone on speaker, finally I talked to 2 Customer Service men to no avail. He basically said my Warranty was up and nothing they could do! I said I was going to complain on Social Media and he didnt care! Go to Consumers Digest before you buy any new appliance! PS, I also went on YOUTUBE and you can see all the TROUBLESHOOTING ON MANY APPLIANCES!

I purchased a washing machine and dryer 1 year ago. Since then it has started to get spots on the control panel where you select size, temperature, etc. I also purchased an extended warranty through Home Depot and is still under warranty for 3 years. I was told for a few more days is still under man warranty. I contacted Whirlpool and they said it is not their problem and sounds cosmetic - I think this is unfair being that I spent a lot of money and it has started appearing on the washer and dryer. No one wants to be responsible. I am a consumer who is very careful and have not had any spills or cleaned it with anything.

I bought a Whirlpool/Fridge Freezer Model WRF560SMYM 01, less that two years ago. Two months ago it started making a terrible noise. Apparently the freezer was iced up and a mechanic defrosted it. It happened twice more and he left saying he could not fix it. Another arrived and took the model number and he disappeared. A third the same. Now I have an empty freezer, just an ice maker. It seems to not freeze up so quickly with the moisture control on. Over $2,000 down the drain unless somebody can fix it. Oh and the fridge gets very cold! Does anyone have any ideas apart from throwing it out and buying another? Never another Whirlpool!

My Whirlpool microwave broke. Im not sure how or why so today I purchased another 2 actually. Both were too big. The model I purchased is discontinued. I had to remove part of my Marble Backsplash - the turntable is tiny however mic is huge. Work on making microwave for smaller areas. Stick to get or Samsung for a nice size microwave not a Mongo mega oven above your oven.

We bought a new Whirlpool just 3 years ago. The first year under warranty, we made several calls for repairs on the water and ice dispenser. The water was never cold and never fixed. Just after the warranty expired, the water stopped dispensing completely and now the ice will not dispense. We bought this refrigerator to have cold water and ice at ease, but it never happened.

When we moved into our home this past year there was a Whirlpool gas stove model number W10406473A. We have the plastic knobs on the front of the stove which need to be pushed and turned in order to turn on the gas. I recently ran into a serious problem where my cat walked across the knob area and pushed and turned the knob causing the gas to come on the stove. This is a problem due to the fact that a child could have also have easily turned on this stove. This is a definite fire hazard as well as a carbon dioxide problem. I warn anyone with this stove to replace it with another make or model immediately. Im in the beginning mode of looking to see if a recall has ever been made on this model.

WE had a Kenmore dishwasher and it never got the food off without scrubbing the dishes first. We decided to get a new dishwasher after being very frustrated. We purchased a Whirlpool and noticed a difference instantly. It was quiet, got the dishes completely clean, (no pre-washing like before) and was overall a better fit for our family.

My wife dropped a liter of pop 12 inches and broke the plastic shelf on pantry door. When I called Whirlpool, I was told its under use and abuse and they wont pay for the repair. It is an electronic component because of the pantry door. I asked to speak with a supervisor who would only apologize... I asked for the phone number to Corporate and was told there is no number, no email, just a street address to send a letter. How 1950s of them. Owned fridge for 4 months paid for the extended warranty and now I can pay $200 plus or look at a cracked shelf.

My not yet 3yr old ($2100.00) Whirlpool refrigerator started having problems. I thought it was related to the ice maker. When the repairman came out, he said it had leaked the Freon, so I thought it should have been a simple fix. Boy was I wrong. It turns out it has a sealed system so no one can access this to fix it. It is now junk and I have to buy a new one. I will never purchase Whirlpool anything ever again and I will also tell anyone who will listen about my experience. My repairman said this happens all the time, and 7 or 8 yrs ago Whirlpool went from being one of the top models to being junk.

Bought a model wdt730pahz in Nov 2017. Up until recently it ran fine and we were very happy. Some folks have reported that the soap dispenser door gets stuck. Same here. In our case we found, when using those detergent pods, to make sure that they are pushed all the way into the dispenser before you close the lid, or the lid jams. Other than that, the dishwasher got the dishes nice and clean. However, after just two years of using it maybe 3 times a week (there are only 2 of us) the motor died. Youd think a new motor ought to survive at least 500 cycles. Anyway, parts and labor was quoted at nearly $400. Debating whether to fix or replace the dishwasher. Might try ordering a motor and pump and replacing it myself.

We bought this unit (Whirlpool fridge #WRF555SDF201) in November 2016. Was so excited! The fridge looks great, love the French doors, and the freezer. Its the ice maker! It spews crushed ice all over every time it is used. Its like the setting is stuck in-between crushed and cubed. Every time it is used ice goes on floor and I have to clean it up. If a small child uses it they get ice in their face and down their shirts. I have been told from Whirlpool and Lowes that it is in the design and they will not even try to fix it. They will definitely not replace it. Lowes claims they know about the way Whirlpool designs their ice makers and that they mention it to prospective buyers, but I know they did not tell me of this design flaw in the product before we bought it. I now simply have to deal with it. It is less than a year old and I burn with disappointment every time I use the ice maker. I am even more disappointed in the lack of concern for me, the customer. We bought 6 Whirlpool appliances at the same time from Lowes about 6 months ago. It will take awhile but they will NOT be replace with Whirlpool or purchased at Lowes.

I have a Whirlpool gas water heater that failed after only three years of operation. My previous water heater in the same spot lasted 18 years. The problem is a defective thermo coupler design that burns out if a filter you cant access isnt cleaned every three months.

I purchased this fridge in February 2015. In August, the handle on the fridge door broke. I called for a replacement on 8/7, on 9/14/15 I received it. It broke on 10/3/15 and had a replacement on 10/13/15. It broke again on 12/26/15. I called for a replacement. I should get it in 10 days. Obviously, there is a flaw in their design. What bothers me is that no one seems to care. I will hope I never have to buy a Whirlpool product again. And I will certainly discourage anyone I know who is thinking about buying their products. I purchased this product at Lowes and they did not care when I went to them.

The washer has rust under the rim in the inside - also the paint is bubbling and peeling under the rim of the washer. I contacted Whirlpool and was told that is a cosmetic problem. There is no warranty for rust or peeling paint. I will never buy another Whirlpool washer. I paid over $700.00 for this washer and I dont think I should have a rust problem after 5 years.

Exterior metal reaches temperatures that cause minor burns on an adult finger and could be potentially more dangerous for a child. The self-clean feature has crashed the oven on two out of three uses of this function and overheats handle.

My oven was a lemon from day one. The light bulb would not light, the oven would not come on. Had the repairman in cause it was under warranty, he replaced the gas valve. A month later the same thing happened, the oven did not light. Have been putting up with this for a little over a year, it is finally off warranty. Same thing happens, you go to cook something and it will not light, then the oven door broke! We had to pay to have a new hinge installed. Whoever heard of a oven door breaking? I have had ovens 40 years old and they still work and the door doesnt break. Needless to say, my oven is still doing the same thing, lights sometimes and other times does not. Called Whirlpool several times, they are nasty and wont stand behind anything. Customer service says there is no lemon law for stoves. I will not ever buy another Whirlpool anything and that is not a threat but a PROMISE.

I bought front-loader WFW8540FW1 in November 2017 from Lowes. I keep having problems with the washer not turning on. I am waiting for the repairman to come. Had repair done in March, May, and now June. I have gotten new electronics for replacement from Whirlpool each time. Obviously something is defective. Is there a lemon law for washers? Hope so. Never buy Whirlpool Washer again!

I bought a Whirlpool fridge 4/23/2013. Thanksgiving it went out. I had a repair company come look at it to see how much it would be to repair. He said the compressor was out, it has a freon leak, and the electric board has a relay that is acting up. Basically it would cost $600 or more to fix. I only paid $750, mind you. Whirlpool customer service said if we pay to have it fixed then send them the paid receipt. They would then give me a 6 month service plan for future repairs if needed. Please tell me how that helps me now? A voucher for $200 or offer something to help me now. Not a happy customer. Thanks for nothing Whirlpool.

May 16 - July 25, 2014. Took almost nine weeks to get the replacement. Numerous service calls. Their tech said self-clean feature should never be used. In addition, I heard that the techs are only paid for one service call, no matter how many times they come. And, they cant fix this oven. It has to be replaced. Nightmare and very dangerous. Most American families cannot wait nine weeks for a new oven to be fixed/replaced.

I’m getting the run around with service. No one comes to our area to check our new Whirlpool hot water heater. The hot water heater has not worked right since I installed it. I need a service tech to come to my house at Whirlpool’s expense and check the damn thing and get me taken care of. Does Whirlpool want to retain a customer or not? Its that simple. My cell phone number is **.

This series is a complete dud. We purchased a home in 2015 that had a Whirlpool Gold Series refrigerator. The home was built in 2013 and appliances were brand new. The majority of our neighbors, whose homes also contained this refrigerator, have had to repair or replace this model. None of the homes in my neighborhood are older than 4 years. We will not be purchasing anything Whirlpool associated in the future.

This dishwasher, compared to my old one, is very quiet but does a very poor job of cleaning. I now have to prerinse most all items. The silverware rack leaves many dirty items such as peanut butter off a knife. I probably waste more water on prerinse than what is saved by the washer.

Model # WMH 1163XVQ-1 manufactured 2010 however I purchased and installed it in July 2011. Noticed a small crack at the base of the handle about a year later. Within the past couple of weeks cracks are appearing everywhere including around the handle, the entire exterior frame as well as interior frame of the door. Neither my wife nor I slam the door or mishandle it to cause this damage. Called Whirlpool this week. Bottom line is that it would cost nearly as much to get a new door as to buy another microwave. This is an over the stove model. My previous microwave was GE and lasted over 15 years. Wont buy Whirlpool again.

We purchased a Whirlpool dishwasher in August of 2014 (Model #WDT710PAYM6) and it broke for the first time in the summertime of 2015, so it was still under warranty. The manufacturer set us up with a local company to fix it. First of all, the guy comes out to look at it and has no parts with him whatsoever to fix it once he figures out the problem. So we ended up waiting for over a month before our dishwasher was fixed. That is a long time to have to hand wash dishes, especially with the amount that we go through each day. I know that ranting about having to hand wash dishes is such a first world problem thing to complain about, but my gosh...if I buy a brand new dishwasher for a good amount of money, I shouldnt have to hand wash my stupid dishes!!It has now broken AGAIN and it is no longer under warranty. We called Whirlpool to see what they could do because it should not be breaking this often. They told us we could either spend $250 for a years worth of maintenance on it, or just pay out of pocket. So you want me to pay $250 or more to fix a dishwasher that we spent over $400 on that has broken twice in a year??? Ive been looking on their website for this model to leave a review and cannot find it, so that leads me to believe that it is discontinued. So thank you, Whirlpool for the piece-of-crap dishwasher. I can see you really take care of your customers when they call about their concerns too. I will NEVER buy any Whirlpool appliance again, and I will be sure to let all of my friends know they shouldnt either. If I could rate this with negative stars I would. So now we have to go out and purchase another dishwasher. Thank God Cyber Monday is here. So I cannot say it enough, do not, do not, do not buy a Whirlpool. If you do, youll find its actually a Whirl-poo, because its a POS.

Our burners broke down just 3 months after having purchased a new Whirlpool stove. Then a week later the oven broke also. I want my money back now. Do not purchase any Whirlpool products. Theyre garbage.

Weve owned this refrigerator for about 6 weeks now. It is a 23 cu. ft. model with a bottom freezer. It is working great, and we have no problems with temperature control in either the refrigerator or freezer sections.

I have had this machine (Indesit IWDE126 Washer/Dryer) for a very short time; the washer is great. It does a 20 minute daily wash which is good however the dryer part screws up everything you put into it and ironing, even with steam, makes no difference at all. The WORST part is the organisation DONT CARE. I wrote to the Chief Executive, Jeff Fettig, who neither acknowledged my complaint or responded to it. I made this complaint in October 2016 and STILL do not know what the outcome is. If you are reading this review I honestly would look elsewhere for a better machine. Try MIELE. They are expensive but 2000% better.

We purchased a new stainless steel Whirlpool refrigerator in February 2015. Within the first few days the fridge door handle broke off. Not that we have super human strength in our 60s but the handle connection is a very thin plastic. We put it down to the possibility that the warehouse or shippers may have banged it and perhaps we just didnt notice the initial crack. The handle was out of stock so it took 8 weeks before the new one arrived. This week the freezer door handle cracked! Same problem - cheap plastic handle connector doesnt withstand the vacuum seal. Whirlpools handle connection to the door is comprised of a 1/8th inch thick by 1/4 inch square piece of brittle plastic. This is screwed onto the door. In reality this needs to be metal. Enough said… Check out the handle connection before you buy this appliance. You will wait months for replacement parts as they cannot seem to keep enough of them in stock.

Its just okay. It doesnt clean as well as I expected to regardless of which dishwasher cleaning brand or type I use. It frequently leaves full residue even if the dishes have been pre-soaked. Even though I have it set to see to it, I feel it leaves too much water on the dishes. It doesnt have a rinse and hold setting. This dishwasher doesnt have any extraordinary features. It just has the features you would expect to find on any dishwasher. The size is average but it handles the amount of dishes I have as a one-person household. Its unobtrusive; nothing sticks out, there is no faux metal on it. Those are all features I like. Its not as quiet as it makes itself out to be. On the whole, I feel this is a very average dishwasher.

Whirlpool Cabrio WTW5600XW - Bought the washer/dryer set on May 13, 2011. The dryer has not given me any trouble. The washer on the other hand has been awful! From the very beginning, I noticed the washer was not getting my familys clothes clean! If one of my children had gotten anything at all on their clothes, I would have to wash about 5 items of clothing to even have a chance to get it clean! Doing this did not always work! I usually send my really dirty clothes to my mother for her to wash in her old style washing machine with an actual agitator! They always came out clean when she washed them! Also, please do not attempt to wash comforters, sheets or any bedding in this washing machine. It does not clean them! When you take them out, they smell worse than when you washed them and have wet and dry spots all over! Oh, and they are still dirty! It is now May 8, 2013 and my washing machine does not wash or agitate anymore! I called Whirlpool and they can only offer 2 options. A repairman for Whirlpool in my area will come out for $129 to diagnose what is wrong. This price does not include parts or labor! My other option is a flat $300 where this will pay for everything along with a 1 year extended warranty. So with the $300 option, this will put me paying about $1,000 for my washing machine! This is ridiculous. My washing machine is only 2 years old. I should not have to be repairing already! Do not buy this washing machine. If you do, definitely purchase the extended warranty and be ready to use it!

Whirlpool fridge with ice and water dispenser that broke down within days of install. The water dispenser stopped working after the first flush and Whirlpool were notified. They engaged a useless repair company who have been unable to resolve the problem and will not communicate updates. Whirlpool have been fully informed of the problem with their brand new product which was defective practically from the start and have washed their hands of any involvement in resolving the problem with their appliance. They defer defective product as a warranty issue and leave the consumer to chase after people to get a repair done. For a brand new $3,700 fridge that doesnt work within a week of install I just cannot believe they would sell a defective item and make their consumer suffer for it.What consumer would knowingly choose to purchase a defective appliance? If you end up getting a defect, the company should make it right....right away. Im at 2 months now without a functioning water dispenser on a fridge that is only 2 months old. Just disgusting.

I purchased a Whirlpool induction cooktop Aqualift self cleaning oven Nov.1/12. The oven has never been easy to clean you always have to scrub it, now I boiled some pies over in Oct/13, the syrup burned into the bottom of the oven before the pies were finished baking. My oven is now pitted, warped, and bakes very unevenly, have contacted the merchant, Saskatoon Appliance, Whirlpool, and Excelsior Insurance (extra warranty) Insurance guarantees 24-48 hr service but to no avail. We still have no service 1 month later.

I just finished a call with Sears Repair. I informed them that this was the 5th service call since purchasing this Whirlpool Cabrio washer two years ago. The washer simply does not work. It fails to complete its cycle; fails to spin; fails to drain; fails to fill; leaves clothes streaked and dirty, smelly, and dripping wet for me to wring out by hand. I purchased it because of my faith in Sears and its Energy Saver label. I often have to wash the same load 2 or even 3 times to get it clean; no more than 6 towels at a time. (It is a large capacity washer, but acts up most often when washing towels or jeans.)Im a retired teacher; and in my best teacher voice – calm but serious – said that I would like Sears to come and take it away, issue me a credit or refund, or I would proceed to file with the Small Claims Court. His immediate response was, I dont appreciate the threat. I carefully (teacher voice) explained that it was not a threat... it was information. Yes, Im angry. But more than that, I am so disappointed in Sears, a company that I have always been loyal to – no more. Time to leave childhood behind and wake up to the reality that this is not the same Sears Ive dealt with for the last sixty years. Now, I’m to drive 25 miles of country roads to a Laundromat.

Big bang for your buck. I have used Whirlpool for years without any needed repairs. Typically you may see brands began to fade as you use them. However, the Whirlpool brand microwave always seem to stay true to its form. As long as you keep the inside clean the microwave should last a long time.

Reading the reviews on this I figured I would chime in. Same problem with the top rack, its unfathomable how cheap this was constructed, since I have had old school dishwashers 15 years old without even close to a similar problem. Bought in 2012/2013 and have had this problem on and off the entire time. Looking at a new one definitely not a Whirlpool!

I purchased a Whirlpool Electric Water Heater in September of 2008. The unit had a 12-year warranty on the tank and on December 24th 2011, I discovered that the water heater sprung a leak somewhere in the tank shell; not the pressure relief or thermostat or anode port. The tank was never abused and operated well within its design limits. It is simply a piece of junk that lasted about 27% of its expressed life. I purchased the tank at Lowes and went for the longest tank warranty to reduce replacement intervals. I shall never purchase anything with a Whirlpool affiliation. The model number is EE3J40RDO45V with serial number 0741106580.

I’ve had my washer and dryer for a long time and it has been okay and it’s time to update. It has had its up and down and I may get another just after a while they are outdated and better appliances come along. Smarter people are making smarter things.

My first time with Whirlpool (Always had GE) but at the suggestion of our builder, we went with Whirlpool and the stainless steel is horrendous. Nothing will clean it or make it look STAINLESS. My refrigerator, dishwasher, double oven, tall vent all look terrible no matter what I use! I have never had this problem before. Im embarrassed to have anyone go into my kitchen...

Just purchased a new Whirlpool Counter Depth, French Door, Freezer on bottom, Refrigerator from Lowes. Delivered Sept 1, missing the flap that makes the seal between the two doors. Shelves can be seen inside the fridge with doors closed. Exposed wires on the side of the door in a port with no cover. The fridge is unusable. Cold air flows out between the doors, temperature will not go lower than 45º. Moisture build up on the top and dripping down through the fridge. Frost build up on the back. Refrigerator runs continually. Had to shut it down. Called Whirlpool Sept 2. They will not replace the defective product. I must wait for a repair. The promise was within 24 hours for a technician to call. Called them Sept 2. Local family operated appliance repair company did not receive the request until Sept 4. They do not have the part nor does the parts supply company they deal with. Its on back order. Whirlpool has the part but long weekend and it will not be here until Sept 8 at the earliest. Whirlpool has advised Lowes that the issue is dealt with. I will see the technician on Sunday (Sept 6). Small family Business does not operate on Sunday or holiday, Monday, and have advised Whirlpool of this multiple times. Whirlpool doesnt care. I paid $2700 and do not have a working refrigerator. I will never purchase another Whirlpool Appliance.

The washing machine is making inviolable noise. I had purchase a semi-auto Whirlpool washing machine from Lotus Koh-e-fiza, Bhopal two months ago. Initially, the company sent a man for demonstration, and at that time, the machine was making a sound and the mechanic removed his back plate and his components and saw that the plate of heating rod is unscrewed. He temporarily tightened that plate with normal screw, and after two months, the same sound is coming again.At present, we are not using the product for the past 5 days and launched a complaint to customer care. The call attender said that the problem will be solved in 20 hours but no one came within 4 days. Today, 21 September 2011, I called to customer care. He was telling me that the complaint has been attended by our attender and at present, no complaint is pending. The washing machine is in warranty period and I am not satisfied with the service of Whirlpool. At present, I am using the product of Godrej and LG, and the service of both company is very good then Whirlpool.

We bought this washer on 9/05/09. Recently, it sprung a leak due to a worn out seal that the repairman said would cost more to fix than just getting another washer. You would think this might be cause for distress, but I literally jumped in the air and clicked my heels with joy! This washer has been nothing but a pain. First of all, I have to pre-soak every load before washing or the clothes come out just as dirty as they went in. I would set the timer on my stove to let me know when the 40 min soak cycle ended so I could change it to wash. Then I reset the timer for another 40 minutes. I also learned the hard way, that using any kind of heavy duty setting would turn towels into a pile of yarn. This washer cost $998, and guilt is the only reason I didnt replace it years ago. Ding Dong the washer is DEAD!!!

We bought a Whirlpool washer in 2010. It started making a loud noise on the rinse cycle in 2012. We called Whirlpool. They sent out a repairman from A and E Repair. Was told tub bearing shot, repair over $700.00. Contacted Whirlpool, was told machine out of warranty. After talking to them, they agreed to send parts if we paid labor. Machine lasted less than a year making the same sound again. A and E sent out same thing, bearing gone. Repair cost $997.17, charged us $136.74 service call after 2 minutes to shake the drum and saying same problem. Was told by Whirlpool, no warranty, tough luck.