This machine needs to go back to the engineering dept. There are too many engineering defects to mention. My Cabrio washer and dryer was delivered October 11th of 2017. It is just my husband and myself so laundry was scarce. I have been unhappy with the washer since the beginning and just recently decided to try and solve the problem. I contacted Whirlpool first and was told these machines have great reviews and nothing is wrong with them. When I started describing the flaws, there was one excuse after another and the person from Whirlpool blew me off. The flaws... all begin with not cleaning which is caused by design. The water level, even with the deep water setting, does not even cover the amount of clothes in a small load; the agitator is so small, there is no effect on agitating the clothes; even with using a SMALL amount of HD detergent, there is always soap residue on the clothes because of the lack of water; and last issue but not final is the load going off balance. The machine will walk all over and error codes according to the repairman need to be cleared so must call if it happened again. Well, the very next load it went off balance again. I did not call because I would have the repairman living with us and I am not willing to set up a bedroom for him or feed him. So, Whirlpool does not care if their product needs redesigning, they only care about selling their product and then the consumer is on their own. Basically the same train of thought from Best Buy where we purchased the machines. Best Buy would be happy to sell me another laundry set... per the store manager but that is all he could do. Will I purchase from Best Buy again... I think you know the answer to that. If they cannot stand behind a product they sell, then they can keep everything they sell, no more money coming from my checkbook to them ever again. Someone, whether the manufacturer or the retailer, should be willing to stand behind their product. But, no one cares. Bottomline, do not believe the ratings on the Cabrio washer. This machine has design flaws that cannot be corrected.

I purchased Whirlpool front load washing machine (Sport 1072 CB) in March 2013 and since then it has been my worst nightmare. Buying a Whirlpool washing machine was one of the worst decisions I took. The problems started to come from the first month itself. Many parts have changed and are still being done. I am continuously requesting them to replace the machine but they have decided not to listen. The after sale service of Whirlpool is the worst in the industry.

August 26th 2014 purchased a NG (NO GOOD actually natural gas) Whirlpool water heater from Lowes. Model No. N40561-403. Installed it and everything was fine until this morning August 29th 2014. The indicator light was out and so was the pilot. Tried to light it without success. Called Whirlpool and they are sending me a new controller that now needs to be installed. Called Lowes and they will not take it back. Wish I would have found this site prior to this costly fiasco. Waiting on part now and I will keep you informed as to my progress. I have a feeling this is going to be 2 days wasted and $367.00.

I bought a Whirlpool washing machine last year. Exactly after one year the bearing problem and noise starts from it. So I do not recommend this machine to anybody because of this bad experience and also high service cost.

Weve had this Whirlpool 5000DW1 machine since June 2017. Never fills with enough water no matter what cycle you pick! Clothes come out with DRY areas on them! Obviously not clean. Who would design a washer that you put soap in and clothes right on top of that! Seriously, how ridiculous. I will forfeit the money spend on this junk if its possible to find something built today that cleans clothes.

I bought a Whirlpool gas range in March of 2015. Three months later the control module went out on it. It was still covered under warranty through Whirlpool, so they send a technician out to fix it. Its now a little over a year later and the control module is out again. I call Whirlpool and ask them if it was still under warranty and if they can it fix it so they say, you want me to send a technician out. Why? I just assumed since theyre sending a technician out but there were going to cover it. Well the technician gets here and its not covered under warranty. And I now I have to pay a $90 service charge fee for the guy to tell me that the control modules out on it which I already knew. Hes going to charge me more than the stove was worth to fix it so I declined to get it fixed.

We bought a Whirlpool Gold French Door refrigerator in 2010. Just when the warranty period passed, the refrigerator started leaking water from the bottom floor. Initially, it only leaked about once per month. But as time passed, the refrigerator started leaking more often, and now its leaking every 2-3 days. I saw many people complaining on the same problem and some of them even submitted since 2006. I dont know why Whirlpool doesnt resolve this issue in many years.

When received there was a black dot on freezer door. It was replaced. Door handle on doors did not line up. Tried to tell repairman and he wouldn’t listen until the third handle on the refrigerator was replaced. Plastic handle broke three times when under warranty. Now freezer handle has broken! Plastic where screws attach handle is stupid. I’m extremely disappointed in product.

Whirlpool Cabrio - Our washing machine just started leaking water with oil underneath. This would be our third repair since purchasing this machine but it doesnt sound like a repair is possible or worth it. Its too bad we cant go back to the old models. They definitely lasted longer with no problems. Companies should make the older models bigger and forget about the front loaders and newer models without the agitators. Too much shaking in the machine causes too many repairs!

This dishwasher (model #WDT710PAYM5) leaked water after having it for 9 months. Service man came out to look at it and said it wasnt level. The very next day when I use it the water came out again on my wooden floor. Now the wood floor looks like it has water damage. Sadly this floor was just installed.

The refrigerator has worked OK except for occasional freezing towards the back. However the vegetable bins have both broken starting with various parts of the handles in front. We eventually replaced them. A brand new one arrive already broken. Same cheap brittle plastic. No alternative available. The company denies any problems or complaints about the bins. Feels like a small profit center for them.

We bought a Whirlpool washer and dryer set (Cabrio WED7300XWO) 2 years ago. Within that time, the door seal fell off and needed to be replaced. The drive belt pulley became detached, and now the drum seal has fallen out and had wrapped into the clothes. I have never experienced such a substandard product. We would trade back this one for our 15-year old set we had replaced it with at the drop of a hat. We are retired and have a summer home, and only use this product 4-5 months a year. Never again, Whirlpool!

Horrible stove. Bought online. Get set up and its worst design ever. Have to lay down on floor to watch broiler. Cant even slide out. The stove top is difficult to clean. The cast iron grates are very heavy and have to move one side at a time. I Cant control low heat. Have to use back burner only. Then Crap builds up on back console. The oven grates are too wide apart, Have To supplement with racks from my other stove oven.

I have a washer, dryer, dishwasher, hood vent, stove top, and oven, all Whirlpool. I cant say enough how pleased I am with this product. My old washer and dryer was over 23 years old when I needed to replace them. Thank you Whirlpool for making such a quality product.

This product is very noisy. This product looks good, works okay, size is good but is very loud and overpriced. Probably would not buy again if I had to purchase another refrigerator.

I am concerned that Whirlpool microwaves installed over the stove have extremely faulty doors. I have two homes in which I have Whirlpool microwaves, and both have huge cracks in the door and small pieces inside the doors beginning to fall out. It deeply concerns me that it will cost more to replace the doors than to replace the microwaves. I have always believed in Whirlpool appliances but now feel that I will have to change brands. My question is “What in the world is wrong with your doors that they crack so easily and the company holds no responsibility with such faulty work?” I would simply think that this was just a faulty door on my microwave, but I have two that are cracked! This definitely means you have a faulty product.

You cannot control anything on this machine. You cannot pre-fill to dilute detergent- you cannot choose temp because what you choose is changed by the machine (manual). You cannot choose your own combinations of temp, water volume, and timing. Once the ** thing starts you cant change anything, like the setting you wish to use. Do NOT BELIEVE THIS IS ENERGY EFFICIENT. There is a REASON that this machine has a 2nd rinse. It is because so little water is used that it does not allow soap, lint or dirt to have anywhere to go but back into your clothes. YOU have to trick it out to get enough water to actually get some loads truly wet. EVER! You stand there like an idiot opening and closing the lid just to get enough water to dilute the detergent. You cant pre fill and then add your detergent because, it needs to sense your clothes load. Wont fill with the lid open. You cant rinse the detergent cup out. You only get to do what Whirlpool already knows about your needs. Oh & lets not forget the spin cycle. When you open the lid, large items like sheets will look like a pancake made from one of the sheets. However underneath will be a tangle of the rest of your wash worthy of a Gordian knot. You can yank your shoulders out trying to dislodge the clothes. Spin yes, I guess it did, I just didnt need permanent press wrinkles. And thats if you CAN actually open the lid. For some idiopathic reason the lid may be on lock. Good luck with that. Most often, youll find no reason that you can discern like an unbalanced load or as the booklet suggests, you havent figured out how to load a machine. I hate the design of this so much that I called the company and they said that they would send a repair man out to see if its working. Whats he going to do? Run a couple of washes and say hey thats how they design these things? They will not replace it. They do not stand behind their products. You are stuck with bad design period.Describe Yourself: Frequent User. Service/Delivery: It came with a big dent in the dryer we bought with it. Installer dudes crossed the hot with the cold. Whirlpool will not stand behind the products they make & they make lots of the brand names. So they figure they can just do exactly what they want and youre screwed because even under warranty, theyll only fix the mess of engineering they designed in the first place. Bottom Line: No, I would not recommend this to a friend.

My 3 door fridge is roomy, well lighted and well organized. I love the fact that when I open the doors, I can see everything at a glance. The freezer section is also well organized and holds plenty. Being able to get filtered water and ice in the door is convenient. The main reason I picked Whirlpool is that it is made in the USA! I want to support American manufacturers that employ my fellow citizens.

We purchased the largest Whirlpool Cabrio Washer (over $1100 value) 3.5 years ago, and had nothing but trouble out of it. The drum has had to be replaced twice, the motor once, and then supposedly a bolt kept coming off on the drum as well, that had to be tightened twice. Now, we dont know what is wrong with it - we suspect suspension imbalance or something, because this extra large capacity washer is constantly unbalanced even with 6 articles of fabric in it now, and I dont even think about putting even what would be considered a medium-large load in it, because it flat up will not wash. You can put a level on it, and it shows leveled, but it still wont operate worth anything. My wife is so put out by it at this point that she has even talked about getting an old ringer washer (seriously). Sears keeps coming out here because we had purchased the extended warranty and truly if they had simply replaced the washer after the 2nd trip to the house, they would have more than paid for the replacement washer even. Instead, they keep coming, looking at it, then having to order parts, and then come back a couple weeks later to put the shipped parts (which sit around our house), back in to repair it each time. All the while, we go without a washer or barely can wash any clothes. We have even taken clothes to the laundromat during one of the repair instances, because we cant just have mounds of clothes piled up for their month-long service. It is ridiculous how little it seems that Sears and Whirlpool care about their customers. I have gone to Whirlpool and Sears Home Services sites and complained at both. I have called both of their 800 lines in the past and again, this yielded nothing to truly depict either company cares. It just goes to prove that customer satisfaction is far less valuable to either of these companies than the bottom dollar profits in our opinion. I dont know where else to post our concerns/frustrations, so anyone can see how put out these two companies have caused us and dont care, but if anyone knows of anywhere else I can post blogged concerns, please let me know.I have complained previously about a dishwasher that we had purchased that we had numerous issues with. Those complaints fell on deaf ears to Whirlpool and really Sears as well. I dont think all the washers are duds, but this one has been nothing but trouble, and Sears wont just replace it, Whirlpool dont care. I have been given the runaround that it is because there arent three (3) service calls in a 12-month period for the exact same issue. Well, I am sorry that it doesnt appear to be just one thing! I have had it with these services calls, parts having to be ordered, only to hit the crazy repeat button again every time! This is far from good customer service, in my opinion, but rather a way to ensure the most profit is achieved! Thanks.Sears and Whirlpool have the worst customer service ever!

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

Mold in my dishwasher right after having washed the dishes!! This is the first time I have seen the mold on the racks (lots of it!). However, my neighbor also has a Whirlpool and complains of the mold all the time. Also, my dishes often do not come clean. I would not have purchased a Whirlpool, but it came with the house, three years ago. Therefore, I do not have a receipt for it.

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

I bought my fridge in late 2008 and I am already experiencing potentially expensive repairs due to what I believe is a defective design system, of which, consumers are having to bare the consequences for those who collected our hard-earned cash and delivered a lousy product! I saw so many similar complaints about the ice system on this fridge that I am almost positive that it qualifies for a class action suit and settlement. How about a collaborative approach to this since we have all suffered needlessly? Tell me what you think and if you are in on it.

I have spent more money in the last year to fix this piece of crap. So very disappointed!!! I have lost $$ of food because fridge does not cool.. Ice maker is a joke... I am going to call someone out for the 4th time... Costing me a fortune... Very disgusted with this product.

My dishwasher was a $300ish model from Lowes. It is over 5 years old and has been reliable for a single persons use. It is run about once a week on average. Early on I had problem with it not cleaning well but that was the fault of one of those no leak supply hoses that restricted flow...fixed that. Would I buy again? Yes.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

We bought our washer in on 2011. Within a few months, the washers behind the screws on the top began to rust. Now less than two years after purchasing this high efficiency and expensive washer, not only are all the washers rusted on the plastic lid but behind the the lid and the side of the washer is rusted. Very disappointed and recommend that you do not purchase this machine.

I purchased it in 2011 for $1100 Canadian. Smooth glass top and true convection. The controls were easy to use, and understand. What bothered me was that it stopped working just after the warranty ran out. I did my research, and found that the newer ranges that have the controls on top at the back have issues with the motherboard overheating, and causing this problem. I did speak to Whirlpool customer service, and managed to convince them to supply the replacement part at no cost. I paid my local dealer to install it. This repair lasted for just over 1 year. Same problem again.This time I could not convince Whirlpool to supply the part. FYI The part in question is the controller. Essentially a motherboard. All the controls are operated through this small computer. It is the only replacement part that costs over $100. Last I checked it was around $450 Canadian. The reason for the fault is overheating. According to the tech that fixed it the first time, it is the most common problem with this style of range. I find this concerning considering the only thing a range does is create heat!Keep in mind that you are virtually held over a barrel. There are only two companies that market their products under multiple names adding up to over 80% of the appliances on the market. They battle for that market by offering more bells and whistles, and less quality. The Range I replaced four years ago was 20 years old. I just replaced my Whirlpool 3 months ago. I went outside of the 80%, and bought a Samsung. Im rolling the dice, and went with induction top. My theory is it will produce less heat because it just heats the pot, not the stove top.Low quality drives me nuts. I want fewer bells and whistles, and more long lasting reliability. I should be able to go my lifetime and only buy two or three ranges. We really like the induction top. It works fast, and doesnt produce too much excess heat. Dual zone oven is a good idea. We werent looking for it, but there was a deal on. The dual zone induction range was only $50 more than the regular one beside it. Now my wife uses it all the time. She will have cookies in one zone, and a casserole for supper in the other. True convection is the other must have. It does a great job cooking everything evenly.

This washing machine is terrible. It barely cleans my clothes and frequently gets off balance. I am now on my second repair call in less than 3 years. (I bought the unit in the summer of 2013. It is now the winter of 2016.) The last repair guy tried to blame me, suggesting that I was filling it too much and with heavy materials. Last night, I washed 5 or 6 doggie towels. Not even large, bath sized towels. And the whole thing just stopped. It wont spin and wont unlock. What a piece of crap.

We purchased a Whirlpool Gold self-cleaning oven three months ago and have had nothing but problems with it. First of all, the new aqua clean system is a joke. I ended up scouring the inside with cleanser and a scouring pad for over 30 minutes to get all the baked-on food that the aqua clean system did not get off. Now Im not wanting to use the oven to cook anything that splatters. Secondly, the oven does not cook when using the convection mode. I thought convection was suppose to cook quicker but in my case, I have to cook the food longer. Thirdly, the bulb burnt out in the oven after only three months. Im glad we are trying to sell the house because I could not live with all the problems very much longer.

I purchased a Whirlpool washer (WTW4800Q) in November 2011. Already, it has rust in the tub. The warranty does not cover this. I never really liked the thing since I have had it. It takes much too long. Lid locks and then starts over. Also, warranty is not good. I wouldnt ever buy their product again and suggest no one else should either. I loved Maytag before Whirlpool bought them out. Im putting this one on Craigslist and buying a real washer, a Speed Queen! Yes, Speed Queen has all metal parts and makes a home washer. Just have to find a local dealer. They are there.

When I first got my energy eff washer it would not fill up with water. Only about 7 inches or so. Then I read that is you wet some clothes first it goes on wait before it starts. Works excellent with the agitator. Have done clothes without detergent and everything comes out clean. My beef is there is no lint trap so rely on the dryer to get rid of it.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

WTW4950XW2 - I purchased My whirlpool washing machine wtw4950xw2 from best buy in 03/30 2013 and it just stop working after 3 yrs. The manufacture warranty was only good for 1 year. I think companies does that on purpose because they know these new equipments are not going to last. I think before they use to have at least a 3 yr or better warranty on appliances. First it started making this loud sound when on the spin cycle, so I had a repair guy come out. He told me that the bearings needed replaced so (how does bearings goes out in 3 yrs). I asked how much will it be to replace parts/labor. The Parts cost $250 and the labor is $200. I might as well buy a new washing machine. I am so disgusted with this machine. My previous Whirlpool, which was not the new modernized, I had for at least 12 years and also I bought a whirlpool dryer. My Dryer stills works after 15 yrs. Im going to try to hold on to the dryer until the long haul. I wish I just would have gotten my old washing machine fixed. Now Im looking for a new washer and I wont be doing a whirlpool or anything with a push to start - just a plain old agitator, no sensing mechanism, just basic.

I have been buying Whirlpool appliances most of my married life. Our most recent washing purchase is the worst machine I ever owned. I have ruined more clothes, rugs, sheets and towels, etc. than I ever have in my 45 years of doing my own laundry. In fact, I do not EVER remember a washing machine destroying any of my articles. I just pulled 2 almost new rugs out of the washer only to find they have been destroyed! I am pretty sure it is the extremely fast spin cycle that is destroying my items. I know it cant be the agitator because it doesnt move fast enough to even clean the clothes. And the stupid load sensor is absolutely worthless! It does not dispense enough water to even cover the clothes let alone clean them. Go back to the old machines that did their job without destroying anything and actually cleaned the clothes with an amount of water that I chose. I ABSOLUTELY HATE this machine.

Tried for several days to schedule service call for my leaking whirlpool ref/freezer. Waiting on hold to speak to a rep... transferred to another dept. - on hold again listening to a recording advising me of the unusual high volume of calls to call back at a later time (should have been my clue of all the problems with their product). I had three different Whirlpool phone numbers given to me from the reps I spoke with. I would like a refund for my extended warranty. I have called an independent service company and will pay for the repair. I will not buy or recommend Whirlpool or their products.

Immediately after purchasing an entire kitchen of Gold Series kitchen appliances including the refrigerator with bottom freezer in 2/2013 from Lowes we began having issues with the refrigerator. I am not an engineer and dont profess to be, but even I can figure out that the whole thing is a problem based on a design issue. The top drips water consistently and has from the first, which has been addressed numerous times. Ice maker replaced trying to fix the situation two times. The freezer guides were messed up and off from the beginning, and had to be ordered-waited for, then installed. In total a repair person has been here, an inconvenience on our part - 7 or 8 times and we still dont have a refrigerator that works properly!The last time we had someone look at it, there was a part that had to be ordered from, yes, Mexico and we had to wait a week or so and they told us they could rent us a loaner!!! Are you kidding me?? I should have kept the old 26 yr old fridge in my garage that is still working that was built in America! After buying $8000 in appliances and supposedly a top of the line brand name that in the past has shown integrity to their products... I pay my bill each month, because if I didnt someone would put it on my credit. But who puts it on Whirlpools credit? Who is going to hold them accountable and how many complaints must there be in order for someone in the government to step up and do something to a company that is taking tax dollars from our US and sending it to other countries but selling less quality products to those who do pay the taxes? I am ready to sign a petition! I should have gone with the other brand! Any other brand would have given me a better shot than this of having less of an issue! Terrible experience and certainly NOT GOLD! Shame on YOU Whirlpool!

When washing towels or a blanket or quilt, anything substantial it wont spin the water out of the laundry. This washer is only 5 months old.

I purchased a Whirlpool microwave model #WHM3205XVS1 on October 2, 2011. The handle broke off in little pieces and was repaired in March 2012. Handle broke off again in little pieces in September 2012. This will be the 3rd handle that will continue to break in little pieces every 6 months. According to both repair men that were here, this is their comment: No customer abuse, this is a very common problem with this model. After to speaking to 3 people at Whirlpool, I was told by everyone, This is cosmetic problem and we will not fix after the 1 year manufacturers warranty is up. I started with the the first person, went to her supervisor, then went to her supervisor. I am now waiting for a call from a manager although I was told I will continue to get the same answer no matter how far up the chain of command I go. So, I was told that it is okay to have 2 screws sticking out holding the remaining part of the handle that is left, because it is a cosmetic, not a functional problem. I will never stop with Whirlpool. I will call 4 times a day if necessary. I will never purchase another Whirlpool product again! I will tell everyone I know not to purchase one of their products. Be careful. They manufacture products for many other companies, i.e., Sears, Amana, Jenn-Air, and many, many more.

We purchased our refrigerator new in 2014. After only 4 years and taking meticulous care of our Whirlpool Top Mount Refrigerator, the temperature regulator stopped working - and the condenser fan rang constantly. The refrigerator couldnt get below 50, and the freezer vacillated between 17 and 30 degrees. We live in a somewhat remote area and could not find an appliance repair person to look at it. So we had to purchase a new appliance. Needless to say we did not choose Whirlpool!

We purchased a stackable electric washer/dryer unit and received in October. Had issues from the start. Called Whirlpool in Dec 2018 and they sent out their contracted service company. Told us they were ordering parts. Never heard from anyone. Called service contractor and they said never received parts. Called January. WP told us that because it was a new model, they didnt have the parts. We asked them to replace the unit. WP called us and said they would replace the unit and it would arrive in late January. NO CALL. Called 2/22 and said, no similar units available. Ask them to upgrade me if there were units available. Said they would and the inventory of the upgraded unit was promising. Would get a call from delivery company for a 3/6 delivery and install. 3/2: Called because hadnt heard from anyone and called WP. Today Katrina ID # ** tells me they are making the new upgraded unit with an anticipated delivery of MID MARCH. I just about flipped my lid. I asked for a supervisor of which she said she was a SR support specialist. I asked that this be escalated and I get a call regarding status. She advised that she would inquire and call me back. Likely shouldnt hold my breath or try to call back because you are on hold for up to 1-2 hours. Just to clarify, have never had an issue with Whirlpool. Every appliance we have in our home is Whirlpool. I just cant believe this experience. I am going to the media on my next stop.

I purchased A Whirlpool washer model WTW4816FWD some six months ago and it is worse than my 13 y/o washer I got rid of. When wringing clothes it seems be out of balance as it bangs like crazy even when clothes are adjusted. I thought it was the feet but no dice and the auto sensing levels allows for the washer to fill completely with only three items in it? The noise it makes while washing can be heard throughout the whole house too. The cycle takes three times as long of any Ive ever used! I hate this thing.

My first time with Whirlpool (Always had GE) but at the suggestion of our builder, we went with Whirlpool and the stainless steel is horrendous. Nothing will clean it or make it look STAINLESS. My refrigerator, dishwasher, double oven, tall vent all look terrible no matter what I use! I have never had this problem before. Im embarrassed to have anyone go into my kitchen...

We had the Whirlpool electric range delivered yesterday. The clock light is too bright! Keeps the house lit all night! Do I really need to pay the cost of burning this? Additionally, it’s so annoying that we will not be keeping the range. If I needed a nightlight, I would buy one. Very poor design. The lights on the other appliances go out when not in use, one would think the range would have been designed to do so as well. I have NEVER had a problem with a stove light being too bright. This is ridiculous.

Whirlpool cabrio washing machine is 3 years old and the bottom leaks heavy bearing oil everywhere. I now see it is a common complaint and the seal was incorrectly installed by the manufacturing plant. They should be forced to offer a recall and they should stand behind their product. I will never buy whirlpool again. I see thousands of complaints online.

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

Whirlpool has a terrible customer service! I have an almost new washer broken and I had it repaired. The company is having the same issues in another model and yet, they would not offer to even refund the repair.

I am so disappointed with this washer. I totally dread doing laundry. The following are the complaints: Every load comes out totally twisted and wrinkled!! The soap/fabric dispenser holds water after each load (I have to take paper towels and get the dispenser empty!!!). There is not enough water to properly clean the clothes. I have never noticed a reduction in my water bill and have had this piece of junk since 4-25-13. There is NO short cycle on this junk machine. There is an odor to my towels - like they are musty - after I dry them and use them. I use Tide HE detergent and clean the washer with Affresh (you shouldnt have to clean a washer). I should have taken the time to write a review much sooner, but decided today was the day after doing laundry. DO NOT BUY THIS WASHER.

We bought this Whirlpool Cabrio washer 2 years ago and have hated it since the first load. It does not clean clothes, and the so-called large capacity will barely clean 5 regular towels. And if you wash diapers, do not buy this washer. If a load is really dirty, you have to wash it 2 or 3 times for clothes to be clean. Then, there is the awful mildewy, moldy smell after a few washes. How can a washer that gets so bacteria-laden be allowed to be sold on the market. Ive been washing laundry for 45 years, and Ive never had this kind of wash-related problems. This washer is an overpriced nightmare. I cannot wait until I can save enough to replace it. And I am watching and hoping a class action suit comes out to force Whirlpool to take these washers back, refund the money spent, and apologize to all the people who purchased one.

I purchased this model 2 years ago. I absolutely hate the fact that there is not enough water dispensed to clean my clothes. Part of my clothes dont even get wet, therefore, I have to press pause and add 2 to 3 gallons of water during the wash and rinse cycles. I do like the spin cycle as long as it does not get unbalanced.Wished I had never purchased it.

My Whirlpool Cabro washer does not get clothes clean. When I contacted the manufacturer, I was told that it is water saving. What kind of water-saving is it if it does not clean my clothes. I would think cleaning clothes require water. If this feature renders the product ineffective, this product should not be in the market.

Problem resolved - This is an update to my previous complaint... The repair man arrived this morning and after resetting the thermostat, the water heater started up again. He explained to me that these new water heaters are super sensitive because of the new designs and systems that are required by the State of California. He said that all brands have to have the same system. He said that the new water heaters dont breathe as well as the old ones. In our case, he suspected that after being installed, there were probably some air bubbles in the pipes which tricked the computer into telling it that there was not enough ventilation, when in fact our ventilation was fine, but that triggered a total shut down! In my previous written complaint, I was really upset because I have not had a shower in 3 days and thought this problem water heater would not be fixed until next week. I was furious! My understanding is that basically the way the new water heaters are designed is not very well and there is nothing we can do because about it they are all the same, unless we want to go to a tankless water heater system which plumbing included would cost $4000.00... so we are stuck and hope this will not happen again!

I purchased a 30 gallon gas hot water heater from Lowes in 2013. Within the first 3 months, it went out. I contacted whirlpool who troubleshot the heater 4 different times. Final contact was in early 2014, I requested a tech to look at the heater. Was informed it is now over a year old, it would be at my cost. Replacement parts $30. Shipping the water heater is great if you like cold showers. After a little searching, I find they know this water heater is junk as does Lowes but dont care.

This washing machine has been the worst machine I have ever owned - I have called Paddys Market on several occasions to have a repairman come out and take a look at this machine, which they did - but the machine never got any better - it has never ever washed my clothes properly its a piece of garbage - clothes come out dirtier than when they went in and sometimes come out dry. Its so busy trying to save water - it doesnt use hardly any - and forget doing bigger loads - I WILL NEVER BUY ANOTHER WHIRLPOOL product again.

I bought this Whirlpool Cabrio Washer 3 years ago. Yesterday will be my last repair. I installed a new tub (bearing failed have to buy a full tub to replace), new suspension rods and a new stator and rotor (cracked). Last year I replaced a drain pump twice, and a computer board. All of these repairs since I purchased this washer have cost me well over $900 for a $1400 machine. I dont mind replacing a pump every few years but these larger failures are unacceptable. We have moved back to Kenmore on some new appliances we purchased this year as result of trouble with Whirlpool. Whirlpool should send out a recall on the suspension rods; the existing ones seize at the top and stop functioning causing the tub to shake excessively. This led to the cracked motor (rotor cracked).

Ours is a glass top & has 2 dual burners & we are very pleased with that feature. The oven however takes quite long to preheat & the alert sounds are so weak you can barely hear them. It was a rapid purchase on a sale item. I wish we had shopped a bit more.

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

We just remodeled our kitchen and bought a Whirlpool kitchen suite in May of 2016. The refrigerator is absolutely terrible. I have had a repairman come out and fix the same repair/problem 5 times, a sheet of ice forms beneath the vegetable drawer (We have only owned the refrigerator for 5 months). Each time the repair person has come out it costs me a day of work due to having to wait all day for the repair service that Whirlpool hires out, well be there between 9am and 4pm. This morning I decided to check to see if the sheet of ice is forming again, it is. So I call Whirlpool again.Again, I call Whirlpool and ask if I can just get a new unit; 5 repairs in 5 months on a brand new refrigerator. The reply I get from Whirlpool is always well send someone out to fix it. The unit has to be deemed irreparable or a part has to be replaced multiple times. No parts are being replaced... no one knows how to fix it. I dont understand why a large company like Whirlpool would want people to write bad reviews for their products and customer service. Im extremely irritated with how I have been treated. I just want a refrigerator that works!! DO NOT BUY A WHIRLPOOL REFRIGERATOR!!

My two-year old Whirlpool Duet Front Load washing machine is ripping my familys clothes. When I went online and saw all the other customers with the same issue, I contacted Whirlpool. Although the contact said that he knew I was frustrated, he could do nothing but send a repairman at a cost of $129 for me and then I would also have to pay for parts. I informed him that the online sites are saying that this is just a temporary fix. He pleaded ignorance and could offer me no other alternative. This is the last Whirlpool or Maytag product we will ever buy... and letting others know about the lack of cooperation.

I have purchased a Whirlpool refrigerator and it has passed only 1.5 years and I have repaired it twice. The cost of repairing is also very high. Service charge is very high so I called a local party to solve the issue. They checked and found that a capacitor and a compressor relay is not working. They replaced the two and debited a cost of Rs.1500.

I purchased my Cabrio Whirlpool washer five years ago. In the past two months I have had three service calls for repairs. I had water leaking out from underneath the machine which was the result of a failed drum seal. Now I get a ul message (there was one blouse being washed on delicate) and the washer is making a terrible banging sound. I dont think it is spinning. I have not been happy with this washer. My previous washer was 30 years old.

Oven was purchased new from Home Depot. Right off, the top black glass surface got scratched. Not sure how it happened. Seems to scratch easily. Then, the oven temperature for baking was found to not hold consistent. While pre-heating the oven for 350 F, the temperature goes up to 375 F, then well into the baking time, can drop to 100 degrees less (275 F). Oven feature is called accu bake. It ruined the baking and seems to be anything but.

I had this same refrigerator in another home and had no issues, this particular one now I have nothing but issues with it. It seems that the quality is not consistent. First the ice maker was not working, then the freezer light burned out and now there is extensive frost build up in the freezer. The refrigerator is only 2 years old!

I paid over $1,000.00 for a washer based upon previous experience with Whirlpool appliances. I am single, over 65, and use this machine infrequently, as compared to when I had children. The only thing Whirlpool is offering is another of their machines at a discounted price. I value principles more than dollars. I refuse to give them another $600+ as a reward for making junk which apparently should have been recalled. The part I need is not available any place Ive found online. And it completely controls the power to the machine. You cannot open the door, you cannot turn it on. I had two service calls to discover this part is not available.

The control knob broke off the washer when it was only two years old. I contacted Whirlpool by email about what happened with the dryer. The control panel is held tight to the dryer now with duct tape and the knob is held on also with duct tape. The knob doesnt work. It is stuck on timed dry so I can at least use it and adjust the time. I cannot use any other setting. It would cost about the amount of the dryer to have it repaired. The customer representative informed me that sometimes things dont last. Im glad for his profound wisdom, but Im stuck with a dryer held together with duct tape. I was offered an extended warranty, but the cost of repair will be nearly the amount of a new dryer. I will seek a different brand in the future.

We bought all new appliances, and within a year, the range and microwave are not working correctly and the refrigerator has rust on the doors. We called about the rust on the doors and were told that it is not stainless steel as advertised and rust is not covered. Fortunately, we purchased an extended warranty, which will cover the repairs to the oven and microwave. Well see how it goes. Stainless steel appliances really arent stainless steel, so they are misrepresenting their products to many people.

We replaced our 20+ year old washer and dryer with a Cabrio set. I read the instruction booklet twice to make certain I did everything correctly. Ive washed two loads. Both times, the clothes were in a ball at the bottom of the washer. Everything was horribly wrinkled. DO NOT BUY this WASHING MACHINE UNLESS YOU want your CLOTHES to COME OUT in a WRINKLED BALL.

I purchased a Whirlpool Refrigerator from Lowes. 21 months later I need to replace the compressor. Whirlpool has been kind enough to cover parts and labor, but it has been 24 days and no service call yet. After multiple calls to their service department, who keep telling me there is not another dealer in my area, I am forced to wait. Living out of coolers for the past 21 days is very frustrating. I wanted to rent a fridge and send them the bill, but they would not cover that. I will never purchase another Whirlpool product in my life and will advise family and friends on the reliability and service I have received.

My glass stove top broke for the second time. The first time Whirlpool accused me of dropping something on it and chipping it. I didnt but paid the $400 glass replacement. Today while cooking, I put cold from the fridge not freezer, sausage into a warming fry pan. I heard the same pop I heard 2 years previously...sure enough the glass stove top broke. After a phone call to whirlpool, and hearing they were sorry but theres nothing they can do, I will write as many letters I can so others dont buy whirlpool.

Bought new dishwasher on 11/29/2013. Model #WDT710PAYM. The top rack cannot hold much weight. It keeps collapsing. One side keeps falling out of the track. Had man in for repair, still doing it. They sent me a new rack and rollers, still doing it. Having repair man come back again in a few days. I am so disappointed with Whirlpool. I cant believe they went so cheap in building these machines. I gave away a whirlpool gold that was 20 yrs old and it is still going strong with no problems. I just wanted to update up kitchen with stainless steel appliances. I will never buy whirlpool again!! This cannot be fixed. It just doesnt fit tight. Im stuck with a bad dishwasher and shouldnt be.

I bought a compact washing machine and 4 months later it broke, needed a CCU board. To make a long story short now the machine is 7 months old and still broke. Whirlpool cant locate a part for it nor do they want to replace it. I think its time to get a Lawyer involved. Ive been calling for weeks now and have gotten nothing but the run around from all very Rude employees. Im turning this over to a lawyer. Im done dealing with Whirlpool. For a large corp Im very aggravated and severely disappointed with them. Wish I never bought their appliances. NEVER AGAIN.

We have several Whirlpool products in our home currently and have been very satisfied with their performances. We have their fridge, stove/oven, microwave and dishwasher, all of various ages. We purchased them from a local big box building supply company and installed them our self. The installation directions are clear and simply for the average D-I-Yer. We would recommend Whirlpool to everyone shopping for these home appliances.

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

Dont even consider a Cabrio top loading washer. Wastes your time, money and insults your intelligence. I never use the deep water cycle but boy the machine does! Ive had loads that have taken hours to finish on the quick setting! Thanks Whirlpool.

Im happy with my 9 year old purchase. They are front loaders and they sit too low for my comfort. The available pedestals cost hundreds of dollars for a pair...that I do not want to spend. I have not had any repairs needed.

I redid my kitchen two years ago. Put in Whirlpool appliances because they matched my refrigerator. I have been very happy with all aspects. It looks good, it’s easy to clean and cooks well. It doesn’t have a lot of special settings. Less to go wrong.

My Whirlpool refrigerator is about 13 months old and the paint is peeling off. I was told my an associate at whirlpool that I could have a service person come replace it for approximately $500. And this is only for one door not both.

I just bought my stove four years ago. Every time I want to bake something, I have to run a fan on my stove because it overheats and shows an F2 error message. I then have to unplug it, leave it unplugged for 20 or so minutes. Once it cools down, I can plug it back in and use it. I have to go through this every time I use the oven. Its annoying and I lose a lot of food because sometimes, it just wont work. Idk what to do!

My new Whirlpool Stove, has two grill like tops, heavy duty and awesome looking. It has a special burner to keep food warm, a stainless steel front and bottom drawer for broiler storage. Broiler is also on top in oven, broiler flame.

I lodged a complaint of Microwave problem on 05/11/2011, and up to this date (18/11/2011), I am still waiting for the problem to be solved. I have a 1 year old baby. We cook food for him in it. Due to the microwave not working, he is suffering.

We bought this on sale but we're really glad we did. I was surprised how quiet it was while cleaning the dishes, insulation I guess makes it quiet. The wife also uses Cascade liquid dishwashing soap which seems to get the dishes really clean. Rinsing before we stick them in probably doesn't hurt, but overall, we are very pleased. The dishwasher has an adjustable rack which we've only used a few times and the start is easy enough for me to even figure out, sorry guys, but yes I do the dishes sometimes. Hope this helps. Good luck. Oh its model # is WDT730PAHVO.

This Maytag dishwasher is awful. The parent company is Whirlpool and their customer service is as bad as their products. I bought this dishwasher and less than a week later the pump isnt working and stagnant water is sitting in the machine. It took Whirlpool 3 weeks to replace the machine and they sent over another defective machine. This time it lasted less than 2 days. The Whirlpool customer reps are rude and vindictive and antagonize the customer with their lack of service. Called corporate office with no help from Cust. Service and was told to leave a message with the operator and await a callback. With this fiasco I wouldnt buy another Whirlpool or Maytag product again. BTW. Im still awaiting my callback from the corporate office... Im not holding my breath. I called the company that I bought the dishwasher from to see if they can help me unload this machine and get a different brand...

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

The machine works well but it is extremely noisy. Large loads need to be washed twice otherwise they seem to not be washed. This machine washes small loads better. Given an option next time I will buy a front loader.

I Purchased a Whirlpool range with self cleaning. I do not recommend anyone to purchase these ranges. The self-cleaning does not work at all. Like numerous reviews that said you can run them several times to do the self cleaning and they do not clean at all. Save your money. Do not purchase a whirlpool appliance!

Most dissatisfying experience with Whirlpool. In 2013 I bought a stackable Whirlpool washer and dryer. Everything worked well for two months, and then the washer started having problems. The washer memory board unit (MBU) needed to be replaced. This was done under warranty. One and half years later I started getting the error F07 which means an electrical problem. I called Whirlpool and they told me a technician would cost $85 for a service call. I delayed the call until today.The technician came, did a diagnostic and then advised me that I would need a new MBU. The cost plus labour amounts to almost the cost of a brand new washer. To add insult to injury, Whirlpool advised the service call would cost $89. (They upped the price since my last call.) You can imagine my shock when the technician told me that the $89 covers the first 15 minutes. I paid $133.34 for one half hour diagnostic testing and to be told I need a new MBU which is on back order for at least 6 months!!! My recommendation is - NEVER BUY any Whirlpool product ever.

Bought a Whirlpool refrigerator at Home Depot in 2018. It has been a $3,000 piece of junk!! Customer service is garbage!!! They refuse to address a persistent problem since the day we bought it. Do yourself a favor and buy another brand!!

I purchased this Whirlpool washing machine model# WTW4950XW2 and after 10 months of use, it broke down. The repairman fixed it (gear box) and said that the motors and the control boards went bad. I didnt get a weeks use out of it because the motor went bad. He came and fixed the motor and it didnt work once after that. I called Whirlpool up and they sent their serviceman out twice and they didnt do much but reprogram it and both times it didnt do one full cycle. Now they (Whirlpool) are going to put a new control board in and hope it works. Whirlpool wants me to get another years warranty on the machine & charge me $100 and not do anything about all the money I spent going to the laundromat (2 months worth) while this machine was not working. There should be a recall on this machine for replacement & reimbursement of all the time and money lost.

Cleans dishes very well, a bit noisy maybe that just the model I have. Exterior is very nice, interior there is plenty of space for the dishes and pans. There are no streaks on the glasses. No soap scum left on the dishes at all, very good unit.

We purchased a Whirlpool refrigerator in December 2017. Since July 19 we have had the same problem with the refrigerator three times. The technicians don’t know how to fix it and Whirlpool refuses to replace it. The customer service rep was ignorant on the phone and could care less about a problem. Even though there is a lemon law they refuse to replace the refrigerator. We have to defrost the refrigerator every 2 to 3 weeks so will cool down again. Whirlpool is the worst company we have ever dealt with customer service wise. Lowes will not do anything about it because it’s within the first year.

Purchased washer 01/20/2012 after prior bad experience with washer, purchased from Sears. The washer is two years old and began making an awful noise and quit spinning the clothes dry. I too have had problems with getting service and cant see spending $500.00 for repairs on a washer that cost me $653.81 to purchase. Whirlpool and Sears better take their head out of their bum before the completely decimate their customer base. Why arent these problems being fairly addressed? It says a lot that your original warranty is only a year and any additional warranty is cost prohibiting. Save yourself some money and frustration and buy the old fashioned top loaders with standard agitation. AND WHIRLPOOL CAN AND SHOULD BUY A VOWEL AND REALIZE THAT IF IT DOESNT WORK IT ISNT MORE EFFICIENT!!!

I am very disappointed with my purchase of the Whirlpool Refrigerator Model # WRF535SMB. As soon as the warranty ran out, it began having problems with ice build up in the bottom of the freezer. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 3 1/2 years old. Other complaints - impossible to clean the freezer. Mold build up on the seals. Glass plate shattered in a thousand pieces when I very gently set it on the counter.French doors, white, freezer at the bottom.

Model CAE2745FQ0, Serial #C72680766 - Purchased this coin op clothes washer 2/2/2018 at Brandsmart, Deerfield Beach FL. Would not empty or spin correctly; 1st service call 2/28/2018. (Less than 30 days from purchase date). 3/21/2018 called Whirlpool again as same problem continues (as listed above). Washer is not being overloaded. Whirlpool repair visit scheduled again for 3/23/2018. This is the 2nd repair time since we purchased the washer on 2/28/2018. Purchased the same model 2 years ago, and experienced repeated problems to the point where we got rid of that machine and purchased the most current model referenced here. We are looking for a full refund of the purchase price as it appears that this recently purchased machine is on its way to be a repeat performance of the 1st machine that we got rid of (that was purchased 2 years ago). Again, we want the full purchase price refunded, which is $900.88. This machine is not even 2 months old. Thank you.

Bought Whirlpool Gold refrigerator, microwave, and stove. The bottom where the freezer is located leaks if you dont slam the drawer shut - many times leaking regardless. The microwave needs to be unplugged/reset about once a month or so because the power dies - light comes on, food rotates, no heat. And the small stove light indicating the burner is on for the front left burner suddenly doesnt light up. 0 for 3 on satisfaction. Appliances are 2-3 years old. Did not get extended warranty. Everyone tries to get you to buy but didnt realize I was buying junk. Will not recommend or buy this brand again.

We purchased a Whirlpool Water Heater at Lowes - model no. FG15040T3NOV, serial no. 0434120861, product no. 0730267 & weve still been having issues keeping the pilot light lit. We purchased the bottom unit piece that Whirlpool said would fix the problem but weve still been having problems with the pilot light going out. The water heater isnt under warranty anymore, so last night was the last straw & we finally decided to get another water heater that wasnt a Whirlpool. Ive done a research on the internet and found out that a lot of consumers are still having this problem to this day.

Re: wdf7payw6. I purchased this unit last February. It has never washed properly. In the last month 2 separate warranty service reps have been out. The first one told me that I have not been doing a good enough job of prewashing the dishes so the arms were clogged. While cleaning them, he broke the top arm. When he came back to replace the top arm, he added that the dishes were not drying because I didnt use enough jet dry so I would have to dry by hand, and that the arms were clogging because I didnt prewash well enough. I told him to leave and never come back. I called customer service and they sent out a new company.The rep today told me that even on time delay or overnight settings I must run the hot water prior to starting the unit. And that since the water wasnt hot enough; the undissolved detergent was clogging the spray arms. This was confirmed by your phone support person who told me that for best results thats what I had to do. The result I want is for the thing to wash dishes. It doesnt do that. The current rep ordered a heater, motor pump and spray arms. My previous dishwasher operated perfectly (until the pump failed) for the 18 years I have lived in this house plus however long it was here before I moved in. I will never buy a Whirlpool product or anything built by subsidiaries or parent AGAIN.

After just 2 years, the electronic control board failed. The temperatures are stuck on the coldest/high mode for both the freezer and the refrigerator, spoiling some foods. The parts and repair are going to be $300. Whirlpool will not replace the defective part or pay for any repairs. Shame on Whirlpool! Model No. GB2FHDYWQ01.

I purchased this machine about a year ago and it is the biggest piece of garbage on the planet. The biggest problem is that it will not spin if the load is even slightly unbalanced. It does not clean the clothes. If you try to rebalance and spin the load, it adds more water and then gets stuck in a cycle where it drains and adds water forever. Do not buy one of these. I am finally surrendering and buying a different machine. A total waste of money.