Bought new Whirlpool duet washer 4.0 couple years ago. Started making load noise. Started checking and its the rear bearing and sounds of it will cost more to replace than to buy a new one. Found this page and after reading review after review, I will not spend a dime to fix the junk product from Whirlpool. Going to put in the dumpster and never buy another Whirlpool product. I have never seen so many complaints about a product and many being the same bearing problem. Where is our recall process? Its ok to rip off people over and over with no consequence. And why do large chains keep their product? Guess theyre in on the rip off.

On April 10, I bought a Whirlpool washing machine with a sensor. My clothes do not come clean. The dirty spots are still visible. I had three technicians come to check it out and after they just made the machine start, make the water run, and make the water empty, they confirmed that it was working normally. I have insisted on having someone come and just do a small wash and they did not agree because they are not there to wash clothes. I went back to Leon’s where I bought it and the saleslady told me that she could not do anything about it. I have been dealing with the customer service and the person has tried three times to get someone to come and check the washer properly and was insisting in front of me that I wasnt at all satisfied with the performance of the washer and still confirmed that the washer was working fine. They keep saying that there are no parts that need to be fixed or exchanged, so that means there is nothing wrong with the washer. I have tried all different kind of soaps. They were suggesting that I use Tide, which was the best performing soap. I used Tide or Purex - I even tried half a bottle of bleach - and it would not clean my clothes. The problem is the clothes are not turning, they just hardly moved with water that just keeps the clothes humid. I tried putting in more water with a bucket and when I push the start button, it would drain out all the water that it did not put itself. Ive called the consumer protection and they have advised me to take legal actions against the company and the store that sold it to me. They confirmed that whatever we buy, the article has to do the work it was made for; so the performance of a washing machine is to wash clothes. I even took a three-year prolonged warranty and the store told me that once the one-year warranty with the company has expired, then they could help me with sending their technicians and see what the problem was and they would take it from there. I have an account with the store and I have eighteen months to pay it off. So I was wondering if the saleslady did sell me an appliance saying that it was very good and that I should not have any problems with it. Can I take steps going against her for false advertisement? It’s a month now that my clothes are not washed properly and I need to rewash them by hand before putting them out to dry. The consumer protection office has been telling me that the store should be the one to finalize the problem with the company, but it seems that not even they can come to an agreement. Whatever steps I will take against the company and the store, what are my chances of getting my washer replaced? Whirlpool has been advised about me taking them to court and I got permission to do so. Actually, they invited me to go ahead and do what I thought was right. I do not have the money or time to waste on something that maybe I will have no chance to get anywhere. All I want is to have it replaced with another washer that would be more performing. If anyone has had the same problem and had their case solved, maybe it will give me hope to go on. Please, what is the best and fastest way for me to get this problem resolved? I do need a washing machine. I do need to wear clean clothes. Thank you for your patience and understanding.

We live in Hawaii, so the price for our stacking closet size unit was exorbitant. It was over $1,000.00. It is small so the size of loads are small too. We bought one that is supposed to sense the load size and deliver the correct amount of water. It does NOT do this. Reviews online show complaints of this same nature. It does clean well but we have to do very small loads to get that.

I bought this washer (model WTW7800XW) on 12/23/2010. Never happy with its performance from the beginning. Within the first 18 months, the lid hinge completely rusted and broke. The repairman stated that the hinges and glass lid would need to be replaced at a cost of over $400. We paid $899 for the washer. Instead of paying that much, not knowing if it would only last another 18 months, we removed both hinges and removed the lid manually to use the washer. After complaining to Whirlpool about the problem, they thanked me for the info so they could use it for the future. The latest problem to arise is the light inside the washer. The mount for the light was made of steel and has completely rusted away, so the light is just hanging inside the washer. Whirlpool needs to step up and resolve the issue with an extended warranty for these machines.

Four years old and only used by a 2 family home. No kids overloading it. Probably wash 3 loads a week on average. After 4 years, it has started the grease flying out of the bottom and now leaking water. My appliance repair man told me to scrap it and buy a new one. The repair and the parts are too expensive and in the end it is still junk. I realize things wont last 30 years like they used to but can I get 7 years out of a major appliance?

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

Piece of crap! Approximately 18 months of aggravation. Clothes don’t come clean, leaves residue on them. Just absolutely the worst experience I have had in six plus decades of doing laundry. When next I get a washer...it won’t be a Whirlpool or anything made by the company. There should be recalls on these washers.

It’s a great stove. I love the glass top. Only dislike about mine is that it doesn’t have the self-cleaning option. I’m very weak in arms and have back injury so bending over to clean it myself is not possible.

My Whirlpool Microwave is cracked all around the door handle and the frame with the insulation foam hanging out of the cracks. Dishwasher also having issues. Completely dissatisfied with Whirlpool Appliances. No longer under warranty.

55 Gal Electric New in 2003 / Limited Lifetime Warranty - I paid quite a bit more initially at Lowes for this unit. Its stainless lined. I have had numerous problems since purchase. I had to replace the sensing element in the Smart Box in 2006. Then the lights started flashing again making a humming sound in the box. I took each piece apart in smart box and cleaned them, which seemed to help. Then the upper element that is also stainless that requires a special wrench to replace went bad according to the blinking lights. Lights stopped after several resets. Now, the water is boiling out of the top of heater and they tell me its the seal in the element that I never replaced. The cover for the element is off. Water cannot possibly build up and force out the top of the cover of tank. I am not an idiot, yet they tell me that is most likely the problem. They didnt listen to me long enough to properly assess my concern. Every plumber I talk to says its the separation of the liner inside the heater. Nonetheless, I have a water problem now in the basement and have never heard back from Whirlpool as promised with troubleshooting guide on an email. I am sick of calling and getting the runaround with every issue. The warranty is horrible for the consumer. Sure, you have a limited lifetime warranty, but when you cant get proper information when you need it, what good is it? Made in America is why I bought the product. I also need a new washer but will not be searching in the Whirlpool line due to their lack of care with an important issue with my heater.

This is truly a piece of junk! My water heater is 2 1/2 years old and the pilot light will not stay on. Was told that I needed a thermal coupler and paid $30 for shipping. Installed it and still the pilot light will not stay on. Was told again that I needed to replace the main control. Another $30 for shipping. Had that installed and the pilot light stayed on but no hot water. The light was blinking 4x (temperature too hot). WHAT!!? ALL I GOT WAS COLD WATER! Now I was told I need to replace the temperature sensor and they wanted another $30! I told them to I was going to junk it and buy a different brand.

The door can be slightly open on the model GSC25C4EYY02, and the alarm will not register. Ive come home on too many occasions to find the food no longer at a desirable temperature. Im very bummed about this refrigerator choice. The refrigerator door open alarm is useless.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

Really pretty fridge... wish it was just a little smaller. Also wish matching appliances had grey sides like the fridge does. So far it has been a winner.

Whirlpool cabrio top loader is junk from the first month. My washer has had way too many repairs. A&E repair has been a frequent at my home. Now Im getting ready to repair it again! Hub gasket or pump not sure this time. All has been replaced previously. Never ending - always something wrong with it!!!

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

Purchase at 2014 and still working and nowadays, they dont make refrigerators, washer or dryers to last more than 3 to 4 years. The quality of appliances, really such since the manufacturers are greedy. And after the 5 year Warranty expires, only Lowes buys back the the appliances and Home Depot. Their Warranty specifies that you have to purchase from them to replacement of an appliances if purchased from them!??? Therefore I would not buy any appliance from them. A refrigerator, washer or dryer, you can take parts from each one and build a whole new appliance, which is very disappointing! TO ME THIS IS BAD BUSINESS FOR AMERICANS, not all people know this by experiencing this yourself and I let people know about my experiencing this myself, manufacturers should make products in The United States of America???

Whirlpool Cabrio Purchased 12-7-2012 - what a piece of junk. Does not get clothes clean, rarely does she even spin out properly. Called because it kept walking across the basement floor. Informed that was the owners responsibility, not the store (Feidens in Latham). Always had good luck with them, bought all my appliances from them. Now I heard a loud bang and she threw up - water everywhere. What a mess.Had purchased special patio block at Home Depot to even her out and every time I used it which was not too often, it acted like the space shuttle ready to head down the runway! Not too happy with Feidens attitude with regard to this purchase. Not going to call them to fix it. Not an ready to pay to listen to their guff again. Expensive machine never worked well since it got here. I always wished for a Whirlpool, be careful what you wish for! Junk, nothing but junk. Only 3 years old and I only do laundry about every 3 or 4 weeks. Live alone, so she certainly was not overworked.

I paid for an extended warranty. Dishwasher not functioning properly- it stops mid-cycle. Had a tech out twice who insisted nothing was wrong. Extended Warranty customer service refused to honor my claim. Will never buy another Whirlpool product again. And buy an extended warranty! SAVE YOUR MONEY!

Do not bother purchasing Whirlpool refrigerators. Bought mine new in November. The paint on the exterior has been chipping. They inform me that its a cosmetic issue and that they are not going to repair it. They told me to use touch up paint. The paint has chipped more than once and Im afraid this is going to be an ongoing issue. Its obviously a product defect (my last fridge lasted 27 years without incident). I dont do business with companies who dont stand behind the products they manufacture. These days its all about get their money and the hell with them once we do. Last time I purchase anything Whirlpool.

This is NOT a true review of the oven as I have not used it for baking yet. I just wanted to make a comment about my new oven which was installed this morning. I turned it on as instructed and heated at the high temperature to rid it of the odours. When it is turned completely off the cooling down process begins, which blows the hot air from the oven into the room, causing some annoyance from the hot air, as well as the noise. Not sure I am going to be so happy in summer. I am certain it is a wonderful product for baking results, but with this annoying feature, I am not feeling so happy about it.

Whirlpool’s WFG505M0BS is a reliable gas range. It doesn’t have a lot of bells and whistles (no self-cleaning mode or convection oven), but it’s also not priced as such. If you’re looking for an appliance that’s sleek, smartly designed, and quick to heat up, it won’t disappoint.

Our Neptune washing machine is 15 yrs. old. Minimal problems, which I could fix myself. The door gasket needs constant attention to prevent mold. It is a front loader. I have replaced the gasket once. The belt transiently slips.

We purchased a $3000 WRF990SLAM00 / K22019120 refrigerator in 2013. Within the first two and a half years we have already put over $700 in repairs. We were told today the coolant for the ice maker has a leak (either a slow leak or a fast leak, they arent sure). But from here on out we will have to put coolant in it to keep the ice maker working. A week ago we spent another $300 to repair the water dispenser. This is the worst fridge we have ever owned. Whirlpool could care less and we are basically out right at $4,000! DONT BUY WHIRLPOOL.

I purchased my Whirlpool Duet washer about 14 months ago. After about 8 months, I noticed that it had started leaking. It was under warranty and the seal was replaced no problem. I then started to notice that my clothes were getting small tears in them. Around January (13 months after purchase), I got tired of finding new clothes and jackets with rips and tears in them. I finally found that the plastic piece around the entrance to the washer was rough and jagged. I called Whirlpool and they told me they could send out a service tech to file down the jagged edges. They told me this was a common problem caused by the zippers on jackets hitting the plastic and causing it to become rough. Because it was one month out of warranty, I would have to pay for the service call. The lady told me I could try filing it down myself. I feel like I should not have to file down anything 14 months after purchasing a new washer. I feel like I should not have to worry that my clothes are ruined every time I wash them. If this is a common problem as the lady told me, it appears to me to be a design flaw and should have a recall. I have lost several outfits and jackets due to this machine and I am very frustrated that Whirlpool would not stand behind their product.

I purchased a Whirlpool French door refrigerator model # gx5fhdxvyo4 in June 2011. Four months ago, ice was forming on the bottom of the freezer. Repair person replaced a clogged plug leading to evaporation tray. Its March 2013 and repair person now has to replace evaporator motor part # W10128551. I contacted Whirlpool and was told the warranty has expired (one year). This repair will be around $175. How can I trust a Whirlpool product in the future?

This is the worst washer Ive ever owned. It consistently gets off balance, doesnt clean the clothes, and is a perfect example of poor design. I have owned the washer for approximately 9 months, and hate it. Im getting rid of it as soon as possible.

I bought a Cabrio Washer and Dryer around January 2015 at Lowes. After going through the worse service imaginable, the washer was like pouring salt in the wound. I like the dryer fine, but months later, Im still unhappy with the washer. While it washes OK, it takes forever to wash a load. Most of the time, it does not spin the clothes out enough. There is no way to just spin again. You have to go through a rinse/spin cycle and you may or may not get lucky with a sufficient spinning. Why cant they just have a spin cycle and why does it have to take so long to wash a simple load of clothes? I have bought many Whirlpool appliances, but this is my last ever.

I bought a whirlpool Washer in 2011 which I bought an extended warranty. Thank Goodness! It has broken every year. At first I was ok since they always fixed it. It is very inefficient and the clothes are not clean. But today I am so ticked. It broke in Sept. and they have come out twice and cant fix it. Now they say it will be Dec. before they can fix it as part is backordered. REALLY!!! Im expected to not have a washer from Sept. to Dec. with no compensation! I have called both Whirlpool and the warranty company and they say thats just the way it is. I WILL NEVER BUY A WHIRLPOOL AGAIN. The warranty service is through Federal Warranty Service.

Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

Our home is only 8 years old. Our neighbors and double ovens have all gone out! I mean it just quit working and the parts and repairs are crazy expensive! We have already spent $400 on a control board and now we need a control panel which is another $300! Its ridiculous spending $700 on repair of an oven that should have lasted a lot longer! Another thing is that our ovens are white and now the panels only come in black! I will never ever buy Whirlpool appliances again and I am spreading the word to everyone I know!

I purchased the Whirlpool Cabrio Top Load Washer in 2009. It stopped working and I found that it needs a new control panel and recirculating pump which will cost $390, including labor (plus the cost of the service call to diagnose the problem). I would not have expected to have this type of problem with a washer within 3 years of purchase. I cannot recommend this machine.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

I have been extremely dissatisfied with the Whirlpool Cabrio washing machine!!! I tried to take it back and Lowes would not let me return it because I had had it for 6 months. It doesnt put enough water in the machine to get all of the clothes wet. It doesnt get the clothes clean and it leaves some kind of lint residue all over dark clothes. I am only able to put in 1/4 of the clothes I put in my Maytag washer which I loved, but it wore out. I am also short and it is so deep I have to use a stool to get up on to reach into so i can reach the bottom of the machine. Even though it is a huge tub, I can only put a few pieces of clothes in it to get it to clean the clothes. It is a very poor design and needs to be recalled!

The washer was 5 months old and broke. Three service appointments and multiple phone calls, it still wasn’t fixed. Whirlpool sent rusty parts out to my home and that was the second excuse for not fixing the washer. The poor service guy must have been 70 years old. Hello, how do washer parts get rusty when they are not even used and are kept in a box?

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

After months of careful research and comparison, I finally bought a pricey (over $2K) Whirlpool refrigerator with a bottom freezer and French doors with water dispenser on top. I really did not want any fancy features, just narrow doors because of my small kitchen, and a fridge on top because of my back pain. Since the date of purchase in May, 2014, I have had 4 service calls. The first was covered under warranty, but no cause of the sheet of ice collection and underside water leakage was identified; I did, however, receive a somewhat patronizing lecture on the importance of thorough reading and comprehension of the owners manual, and a statement that most of my service calls are for customer education. A follow-up service call, a few weeks later and also covered under warranty, identified the cause of the ice collection and water leakage: a faulty duck bill little piece of plastic in the drainage system that is a problem well known to Whirlpool. In mid-June of 2015, the ice maker had to be replaced, to the tune of $360.00. Today, I had a service call ($103.00) and received an estimate of $405.50 to replace the broken freezer drawer slides, which prevent the freezer drawer from fully closing. I will be applying that $405.50 to the purchase of the simplest model, non-Whirlpool refrigerator available, and have the Whirlpool hauled away. Besides the problems noted above, the center of the refrigerator freezes the food, while the freezer compartment arbitrarily defrosts. There are alarm icons that go from blue to red to alert you of the need to replace the (expensive) ice and water filter, refrigerator air filter and crisper freshener. Alarm bells ring to inform you that the doors have been open too long, but nothing alerts you to the fact that the freezer door is not completely shut, or that the freezer has gone into defrost mode because someone inadvertently brushed up against the control panel and changed the settings, or that water is pouring freely out from underneath the appliance. I have had to change my buying habits because fridge holds at least 15% less food, even though it is the same cubic footage as my previous (top freezer) one. Freezer contents easily slip down behind the top freezer drawer and jam the door open. I have to take most frozen boxed items out of their original containers and pack them flat in freezer bags to get enough storage. Some tall bottles do not fit anywhere in the refrigerator compartment, and have to get put in sideways. Even in the absence of mechanical problems, using this refrigerator is like packing and unpacking a suitcase many times a day. While Whirlpool customer service personnel were not overtly rude, there were dismissive and condescending overtones in some of the questions and directives I received from them, and another insinuation that service calls would not be covered under warranty if they end up being for the purpose of customer education. The extended wait (7+ days) for appointments with a Whirlpool-certified appliance repair company, along with the customer education exclusion, were absolute deterrents to the purchase of the extended warranty. Besides my personal disappointment and disgust with the purchase of this appliance, I am sad to see that the Whirlpool brand has slipped so far in product design, quality and customer support.

We have had this Refrigerator for 3 years in December of 2016. To date, we have had to call a repairman (in February 2016) to replace a circuit board on the back of the refrigerator. That took 4 days, as the company sent the repairman the wrong parts. After that $300 repair, which we got at a discount because, the repairman felt bad that the company actually sent the wrong part. Since then we have taken it apart ourselves for several reasons: The freezer compartment filled up with a layer of ice and started to melt all over the floor, shutting the refrigerator off, (which then forced us to borrow coolers to store the food) until it could be repaired. The drain tube was completely blocked and in order to fix this problem, the tube had to be taken out and modified, according to the Internet videos we then watched. In order to make all of these repairs, the door, the shelves and baskets have to be removed, which is definitely not an easy thing to do at all.There are so many hidden screws and tabs that must be manipulated with tools and by hand to remove the doors, shelves and trays just to get where you need to be in order to make these repairs. With each repair, the ice maker and water dispenser started having problems, because, each time the refrigerator has to be shut down, it takes hours for it to re-set itself. Luckily my husband had the tools necessary, with videos on the Internet to assist us. However, once the first problem started, it was a snowball effect, literally. ALL of these problems have been identified by the manufacturer, however, nothing has been done. VERY POOR DESIGN!

We bought a new Whirlpool dishwasher with a kitchen reno. It cost over $1000. One month out of warranty the pump died. As this is apparently a common thing with these dishwashers the company sent a new pump, free of charge, but we still had to pay $150 for the install. Now, less than 2 years after purchase, the dishwasher refuses to drain. I wrote to the company, they are not interested. Dont buy Whirlpool, you are only throwing money away.

My Whirlpool refrigerator, model number ET8MHJKXM005, constantly leaks water into the bottom inside of the refrigerator. Its only 4 years old, for crying out loud! I have a repairman coming over in a few days who tells me the newer Whirlpool refrigerators are notorious for having the drain ice up. Why would Whirlpool design such garbage? They should all be recalled.

Weve been in our new home less than a year and a half and our brand new Whirlpool French door fridge is dead. Service is a week away. Updates to follow.

Cabrio Top Load Washer model WTW6800WW1 - Although we were very happy with the vendor where this was purchased and happy with the majority of the washer function; there is a problem with the cabinet & lid connectors rusting. Specifically, the lid connector on the left side totally rusted out, and also around the bleach cup, rust. There are also rust spots where the seam of the top section of the washer meets the bottom part. The washer was purchased in 2009. We have had it serviced in the past, prob 5 years ago, it needed a new motor and the rust was beginning to show then, while under warranty. I recently called Whirlpool and the associate told me that she had never received a call with regard to this type of problem. She did give me names and phone numbers of appliance repair in my area. I find it odd that Whirlpool would not make their associates aware of issues like this. I searched online and saw more than a few complaints about rust. So on it goes, no recourse, and as I read about the problem from others reporting this; it was mentioned that the vapors from the bleach cup etc, contribute to the rust. Additionally, even if it was under warranty, I was told that this is considered cosmetic and it would not be covered. Until... and I can only suppose, that until the lid possibly falls off while lifting, the cosmetic ruling may then turn into a function problem. Now there is also a squeaking sound, so off to call the appliance repair, check the cost and next time... buyer beware. I guess a lesson in science as well, hopefully this design flaw will be corrected for the next models in process.

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

After proudly bringing home a new Whirlpool gas hot water heater NU40T61-403 day 2 no hot water. Wait 10 min and reset. This became a 3 times a week habit and now it will not relight. The repairman they sent out wanted us to rebuild our house to conform to code. Our old heater worked fine in this location. After talking to their tech, they sent us new parts overnight. Still cannot get this thing to light. All we want is hot water!!! Calls to the tech line end one way, it has to be your fault. I worked for The Gas Company!

Im no longer buying Whirlpool products. They do not all up and are made like crap. My Cabrio washer being the most recent problem. Hinges broke on the lid and the drum spring broke. Out the door it goes! Im having my American made Speed Queen delivered tomorrow, the last Speed Queen I owned last over 30 years.

I will be happy to provide exact details soon but wanted to share I have had most of our clothes and household items-sheets, rugs, towels etc. ruined by this machine. And it is under warranty and Lowes in Dallas, Texas where I purchased it has seen the evidence. I rolled in with a suitcase full of different examples of ruined items and some photos. The repair person Whirlpool sent out was nice but not willing to document clothes and said the machine is fine after a few diagnostics digital checks. He did not run a load of clothes! And it takes forever to set up. My wait was over 3 weeks. etc. Lowes has been incredibly wonderful but states the warranty is Whirlpools decision and all Lowes needs is a RA (return authorization from Whirlpool) and Lowes is happy for me to buy whatever ever washer I like and even are willing to give me a discount as they know how horribly Whirlpool has treated me.The manager stayed on speaker phone with me for over an hour. My husband is a lawyer and I will further pursue this situation as Whirlpool hopes I will just drop it by March when my Whirlpool warranty runs out or give up from protocol internal exhaustion. As they have insulted me in every way... Even suggesting I sell the defective machine to someone else... And I said, How in good faith and having a conscience could I do that? Anyway after spending a lifetime it seems trying my best to get this resolved with a cauliflower ear from being on the phone for so many hours with their resolution leaders and specialists etc. It is obvious I am about to have to go on social media and do everything I can to Save others from this time waster, Save their laundry, etc. and Did I mention at times it leaks a little bit of water out the front. As it was the least of my worries as I was showing nice tech my expensive ruined 900.00 ski pants, ruined shirts etc. I think the machine cost around a 1,000 to 1,200 so... Will get back to you for an update. I have a whole file folder on documentation now and it is not about the money or the fact I cannot wash clothes. It is down to principle... On my third top-level resolution leader in MI. -Jim- basically had me read between the lines that I was dealing with a Fortune 500 company and would never win. He is underestimating the level of frustration and lengths I will go to not be taken advantage of as a woman, a career girl, a wife and a yoga teacher. I will be in Yoga warrior mode and this is disheartening as all I want to do is wash my clothes. Did I mention all my Lulu Lemon pants are ruined and I never put them in the dryer! Only delicate cold etc. Have them remain intact etc. really simple here but Whirlpool not standing by their warranties. And my whole home is outfitted with Jen-air, Kitchen-Aid, Maytag etc. which are all owned by the same company so I have been a very loyal customer who possibly just got a lemon. Or standards at the company have severely changed. More later on developments hopefully. Sad in Dallas.

I have had an extremely frustrating experience with Whirlpool refrigerator WRT311. It broke after 6 months. So far it has been diagnosed twice with a faulty compressor and leaking coolant. Whirlpool will (seemingly) never replace an appliance--even if it makes no sense to keep trying to fix it. This is a $600 refrigerator! I cant imagine how much they have spent in repair costs. They simply send a service tech time after time, jerking the consumer around with no regard for what we have to go through to arrange 6 tech visits, some of them multiple hours long. Yes, we have had six tech visits, for a total of 10+ hours, and six weeks living with a broken refrigerator. As well as 30+ phone calls, hours on hold, etc.The refrigerator is loudly throbbing away after being refilled with coolant twice, and is still leaking coolant. Are they hoping the customer just gives up and buys a new appliance on their own? I wonder about the many positive reviews of their appliances: Are they fake? Are they churned out by Whirlpool? I have no confidence in this company. They are inept, if not crooked, and I would advise buyers to beware of poor quality and extremely poor warranty and consumer service.

We have purchased 4 refrigerators in the past 20 years. The first three were not Whirlpool and were a constant issue for us. Once we purchased the Whirlpool, we no longer had issues. We have the side by side with a freezer at the bottom. This model has performed exceptionally well for us and hasnt presented any issues for us. I would highly recommend it to family and friends, thus the rating of a five.

Whirlpool Refrigerator Freezer WRF560SEYB01. Purchased the Whirlpool Refrigerator Freezer in 2012 at Sears. Ran okay for 2 years. Bottom freezer door came off the track. Called Sears. Sent out repairman for $200 to replace the door. He did not check the ice buildup on back of freezer. Next problem, severe ice buildup, loud noise. Used hair dryer to melt ice and took the blower fan out of freezer. Solid ice on all the blowing fans and found a chunk of solid ice. Freezer no longer made the noise until the ice built up again. Now, it continues to build up and we have to use the hair dryer every two weeks. A refrigerator should last at least 10 years. This model doesnt even warrant a rating of any kind.

I purchased my Whirlpool Cabrio H2Low from Sears 6 years ago. After numerous problems with clothes not getting clean (soap spots, stain transfers, etc) I learned the only setting I could use that actually cleaned was bulky with an extra rinse (so much for the energy efficiency). My first major repair was in the first year. Weve since had 3 more and the darn thing died again this morning. First the motherboard died and needed replacement, the drain pump failed, the door lock failed, and twice now it stopped spinning. At first I thought maybe I was just unlucky and bought a defective machine but repair sites are filled with reports of similar problems with these machines. I will never buy another Whirlpool product again.

I bought a Maytag front load washer on October 24, 2010. I have not been able to use it because it came damaged by the manufacturers. I contacted them by phone several times and it took them three months to send someone (A and E sears repair). Two months passed and I did not get the parts necessary or a replacement washer. I kept calling and finally they sent someone again in May 2011. They said they where going to order the parts because the new company was not going to replace the machine, even though it was already damaged. They said I would get the parts between three-five business days. I only got one part. A and E sent a repair guy again on the 22nd of June. This one said they needed the entire machine in parts and that he would order the parts. I called A and E one week later and they said they were waiting for the on manufacturer to send the parts (Whirlpool). The 26th and the 27th of July, I got the parts. On the 22nd of July, another repairman came and said we needed more parts. Today, August 16, 2011, I called Whirlpool and A and E and now they said the parts wont be here till after October 26, which by then I would have to pay for the parts and labor if I wanted it fixed because by then the one-year warranty would have expired. So here I am with a $700 washer, which was never used and they refused to fix/replace. They sold me a lemon!

2 years of use the wash plate went. $150 later, one year later wash plate went again (the wash plate is all plastic, the motor spline in metal total stripes the plastic teeth in the wash plate) I replace myself. 3 weeks later the shift actuator failed which cost another $60 which I replaced. Now the bearing is going. There are only 3 people living in the house. I would stay away from the top loader washers from Whirlpool h2 low series. Huge disappointment.

I purchased a very expensive Cabrio top-loading washer thinking I would never have to worry because supposedly it’s the top of the line, right? Well, I have it a few years; the first week they replaced the basket because it was ruining my clothes. And then I had to replace the pump because of a coin getting caught and putting a hole in the pump. Really? What the heck? Now the basket is all shredded at the top. Obviously that isn’t right, so what do I do now? Replace the basket again? Who gives them the right to charge so much for a piece of junk? Plus, it’s supposed to save on water, but I feel that the clothes don’t really clean well. They hardly feel wet coming out of the machine.

This microwave usually has great reviews but I think I just got a dud. I purchased this model (WMH53520CS-0) as part of my new home build. After 9 months the door sensor broke and anytime we would go to run the microwave, it would tell you to open/close the door. Whirlpool sent out a certified factory dealer to fix the problem. They found it to be a faulty control panel and replaced it. After that was replaced, the exhaust fan broke. Whirlpool sent out that dealer again with the new part, and everything was working perfectly. Flash forward a whole 24 hours later, and the microwave would make the loudest sound ever and shut off after 3 seconds and blow the fuse. Turns out the turntable motor had broke and the NEW control panel was already faulty.The turntable motor part was on back order for a month and I am still currently waiting for it to be shipped to me while I have a microwave shut off collecting dust. As most anyone would be, I was extremely frustrated knowing that Whirlpool has spent at least 4 times more sending out certified dealers and replacing parts, than if they were to just order me a new microwave. They stood firm on their policy even if it meant a customer without a working microwave for over a month. Whirlpool did offer me a nice $75 debit card that took 4 weeks to arrive to help pay for a temporary microwave, but they would not work with me when I asked for the warranty to be extended 3 or 6 months. I wanted that peace of mind and its frustrating that for 2 of my 12 month warranty, the microwave was completely broken.Overall, its a nice microwave when its working but with all I have had to go through, I wouldnt recommend this model nor any Whirlpool appliances...

We purchased the washing machine on February 2, 2013 and initially noticed that some of the clothes were still dry when the complete load was over. Meaning that I am not saving water cost because I then have to rewash the clothes and pre-scrub the clothes. Then a little over a year later, the machine is making this extremely loud piercing noise when spinning. The cost to replace the part is $250.00+ the repairmans fee. Whirlpool says there is nothing they will do. From reading the other reviews, this is really sad because of the numerous people having the same issueS with a capital S. I definitely would support a class action suit.

I purchased my refrigerator from a home improvement store in October 2013. We paid around $2,600 for it. About a week ago we had a power outage and the refrigerator never came back on. I called Whirlpool repair since it was still under warranty. The said it would be 9-2-14 before they could come out. Today they came, did not have the part but said it would be here in 10 days. We will be without a refrigerator for 3 weeks. This is totally unacceptable but what can I do?

I have a two-year-old top of the line Whirlpool Duet Steam washer. Cleaning performance is adequate at best, but my biggest complaint is about the visible mold buildup that collects on the water dispensing plate as well as on the detergent, bleach and softener dispenser and rubber lining of the washer opening. I have cleaned the removable detergent dispenser weekly since purchasing. The water dispensing plate has a continuous buildup of thick black mold that can only be removed with a tooth brush and bleach and only a small portion of those openings are reachable. I have cleaned the machine with Affresh as recommended and exactly as the manufacturer recommends. Nothing changes! I contacted Whirlpool and was told this was normal for all washers in which some moisture always remains and that I should continue to clean and leave the door and dispenser drawer open to allow the areas to air dry. So, I have done all of those things for the past year and nothing has changed! I received notification that a class action suit had been filed against Whirlpool for this mold issue but have not been contacted in any other way. Not only is this mold visibly disgusting but certainly is worrisome from a health perspective. When I contacted the company a second time, I was told there was nothing that could be done and it was in no way a design flaw on the part of Whirlpool.

My new Tridel Condo came with a brand new Whirlpool washer and dryer and the washer has not been working well since the beginning. After several service calls the repairman finally gave up and now were getting a new replacement. However its been a nightmare working with them trying to get this washer replaced. The Whirlpool delivery team and the service team cant seem to coordinate a time together for the replacement. We had to make a first appointment for the service guy to uninstall the old unit, the second appt for the delivery guy to drop off the new unit and pick up the old and a 3rd appt to install the new unit. Each appt has a 4 hour wait window. This is their standard procedure, which is totally inconvenient to customers. To make matter worse, the delivery guy came too early for a condo delivery (before 9 AM) and told us he will be back the next day. And he didnt show up. It looks like now we actually have to have 5 appts (including the 2 missed appts by their delivery guy) to have the washer replaced. All the time I wasted waiting for this delivery is worth more than the washer itself. What would be 4 hours X 5 appts = 20 hours. This is the worst customer experience ever. After 3 months of constantly calling Whirlpool and still no washer. Whirlpool needs to hire some competent people who actually care about servicing their customers.

Me and my wife bought a Whirlpool top load washer June 2011. Two months later the motor locked up and they repaired it; then the transmission started whining the next month. It was repaired. Now a bearing is going out all in the first seven months of ownership and they will not exchange washers, they just want to keep fixing this one until the warranty runs out. Whirlpool washers are a piece of junk and I will tell everybody not to buy anything Whirlpool.

Washer does great job and happy with the results, very well. Appearance of dishes are good and leaving dishes very clean as well, would recommend this dishwasher to anybody. The color is also great and matches up with my stove and refrigerator, making the kitchen look very nice and great approach for other appliances to match.

DO NOT BUY THIS MACHINE. Mine is less than 2 years old. First one month after warranty expired, the clear lid cracked...$350 to replace! Then a few days ago a rusted circuit board came apart and jammed up my washer. This should NEVER happen. I contacted customer service and they told me that they are not covering this problem and that the service call is $175 and cannot estimate the repair cost. They also could not send a repair person out for 5 days. The washer has not been repaired yet so I do not know the entire cost but it will be expensive!

We purchased 2 whirlpool commercial coin operated washer machines and both computer boards had to be replaced twice each - model CAE2743bqo and CAE27438qd.

This dishwasher (model #WDT710PAYM5) leaked water after having it for 9 months. Service man came out to look at it and said it wasnt level. The very next day when I use it the water came out again on my wooden floor. Now the wood floor looks like it has water damage. Sadly this floor was just installed.

It shows handprints, smudges, the door swings open and slams into stove. I did purchase extended warranty which I intend to pursue, not enough space, door issue, junk. Dissatisfied, dislike, low quality - that should say enough.

I bought a Cabrio washer. Since we bought it, I have had to fix it. The machine is a piece of junk. It looks nice though. After 5 technicians later, our piece of junk is still having problems. We are a poor family with 3 kids who struggle to make ends meet. I feel that this company has taken advantage of the people who put their trust in the so called American company Whirlpool.

We bought a Whirlpool refrigerator/freezer from Lowes 4 years and 11 months ago. It apparently sprang a freon leak somewhere... repair person cannot tell until they take it into their workshop which will cost $300 - 400 just to find! And then there is a strong possibility that the compressor is toast. I called the company and they were not willing to help out at all. Why should a refrigerator only last 5 years (technically less)? I am not buying another Whirlpool and am looking for refrigerators that have a longer warranty on their compressors - LG which has 10 years! Whirlpool cant do that????

We bought our first Whirlpool 4 door about 4 years ago. Within the first 3 or 4 months the ice maker stopped working which was repaired. Then at 3 years the compressor went out and of course no cooling or freezing. Since we had bought this at Lowe’s they loaned us a fridge until ours was taken care of and told us to call whirlpool. When we called they said they would do nothing for us. Between them and Lowe’s we were finally able to get the refrigerator replaced by paying another $1,000. We have had the new fridge for a little under a year and the ice maker stopped working. While trying to get it working by their service repair people the cooling and freezer stopped working. The service people said the compressor is bad. We called whirlpool again they will not replace the refrigerator and said it will have to be repaired. The service company says compressors are on back order and don’t know when they will have one. All of this has been going on for 3 weeks at this time and who knows how much longer. I had to throw all of the food in my freezer away and as well as most of what was in the refrigerator. I am now buying ice every other day to keep some foods cool so we can have something to eat. We are 82 years old with a very limited income and find this very difficult to deal with. Whirlpool’s reply is sorry but they will not do anything since the fridge is under warranty.

I purchased Whirlpool washer in Dec.2017 and used it in winter months only (Nov to March). It kept leaking and had to get appliance repair service for $50 and was told that machine is defective and whirlpool should repair it or replace it. I phoned whirlpool and they told me I have to use their appliance repair shop to evaluate the machine for cost of $130. The inlet valve was leaking and needed replacement for a cost of $253.55 and whirlpool shirked all and any responsibility. Dont buy whirlpool as it is not a good product and service is poor.

This machine (Cabrio) is a piece of junk. It does not fill up with enough water to cover the clothes, even on deep wash and your detergent will still be sitting on top at end of wash and clothes are not clean. It was a $900.00 machine. We need to file a class action law suit. Worthless waste of money. Anyone know of any remedies to get a new machine from Whirlpool or of any class action suits?

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

My Calypso washer is broken AGAIN. I have spent more in repairs than the machine cost originally. After more than a dozen emails to customer service they have still not answered me even once. Its obvious they put as much pride in their customer service as they put into the assembly of their products.

Like many others Im experiencing the same sensor problem with my 4-year old Whirlpool oven. It wont start even after opening and closing the door multiple times as directed. I installed this oven to replace the original Whirlpool model when it died after about seven years. Im absolutely done with this thing. How frustrating when you find out that your guest isnt able to a forgotten cup of coffee that went cold. I thought to call a repairman but after reading all the reviews, I feel its better to switch brands.

We purchased a number of Whirlpool appliances (dishwasher, double door refrigerator, Duet stackable washer and dryer). After 14 months, the ice maker broke. $200 later, it was repaired with an upgraded kit.Last week, the washer error coded and the door locked so we could not get out the wet clothes. Called customer (no) service and they advised that we needed to call a service tech because he has a special tool to unlock the door. I stopped by our local appliance store and the counter person told me how to open the door. Had the tech come out for $70 and it could be the lock mechanism or the control panel. It turns out to be the control panel, which costs $250 + labor and would total to around $500, give or take a little. We are in our 60s, my wife does not take in laundry and the ice dispenser was seldom used because I can sneeze ice faster than this can dispense it so I open the freezer door to get my ice.The tech and the store clerk said that these were common problems with these machines. This was a major expense when purchased. So far, the dish washer has not had any problems, but tonight might be the night. The reason we bought Whirlpool is because of the Maytag connection, now that is in the same toilet.

Whirlpool Gold French Door refrigerator freezer on bottom - I purchased my refrigerator at Lowe’s on 9/26/12 and it cooled OK for the first 3-4 months but it was very noisy along with water dripping from the ice maker door. Then sometime in Feb. my freezer started to warm so I contacted Lowe’s service and they scheduled Tech. to come the following week. He found that freezer evaporator was freezing - suspected a leak and ordered one. Replaced that, and a short time later it was warm again. To make a long story short they have been to my house approx a dozen times replacing the freezer evaporator, control boards, adding refrigerate, and replace the reversing valve, and no time at all it was warm in the freezer again. Tech could not find anything wrong with it and added a little refrigerate and the problem was solved... I thought! Two months later the freezer was warming again. Now they say it’s the evaporator on the cold food side has a leak and needs replacing. Been waiting two weeks now on parts. Talked with Whirlpool and Lowe’s about replacement with a new unit but they tell me they only cover parts and labor. Needless to say this is my last Whirlpool appliance!!

Bought a new $899 dishwasher 7/2020 and it stopped working 10/2020 And it’s been weeks and now I’ve been told it will be another 21 before they can replace it if at all! #whirlpoolusa #whirlpoolcorp Customer service lady was rude with an attitude.

I hate hate hate this Whirlpool Washer WTW5000DW1! To put it nicely. This is my first washer without traditional agitator and the sensing feature. I will never again buy a High Efficiency Washer with these features. It constantly gets stuck on sensing! We rearrange the load over and over and it still does not want to work. I have researched the online videos and this is a common problem. I wish I had researched prior to buying this type of machine.

On 5/3/16 I purchased an Amana high-efficiency, low water, top loading washer. What a joke, it is a piece of junk. There is no water so clothes dont come clean, and if you leave money in the pockets no worries. As it will be right there after the clothes are washed and dried (got matching dyer also). They dont even smell clean after two washing. And now you are to purchase a cleaner to clean your washing machine. This is truly not an efficient machine in any way.

We purchased our Cabrio washer and dryer in 2012. In 2014 we had to replace the rollers in the dryer. Since then it makes a loud clunking sound and it has to go through at least 2 or 3 dry cycles to dry the clothes, sometimes more. The washer lid lock doesnt work very well anymore. Sometimes it wont lock so I cant get the clothes washed. It takes forever to get it to work. Ill never buy Whirlpool again.

We've had a of Whirlpool washer and dryer for well over 8 years now. The only thing we've had done to it during that time was to give it a "tune up". That was done by a friend and only took a half hour or so. I don't know exactly what he did to it but the "tune up" didn't require any parts. In fact, when my friend was finished with his version of a tune up, it was as if it were turbo-charged and our clothes came out cleaner than ever. The washer runs quietly, as far as washers go, and the capacity, washing options, etc. are perfect for a washer that gets a ton of usage.

My husband and I purchased this washer in August of 2011. Within 2 years the lid broke because of it a cheap plastic frame on a heavy glass lid. At that time I researched it and found many people with the same complaint. Whirlpool would not do anything for us but the company that we purchased it from did agree to supply the part if we paid the labor. We did this and replaced the lid. Well here it is just right at 2 years again and the lid is completely broken and the washer is unusable. There is no way to bypass the lid issue which makes the washer completely useless.I called Whirlpool again and was told there was nothing that could be done and that because there was not a recall on the product, they would not be able to do anything for me. We have purchased a new Samsung washer that received excellent reviews from Consumer reports and we will NEVER buy another Whirlpool product again. I cannot believe a company that old and as large as Whirlpool will not stand behind a faulty design and faulty made piece of equipment. It is very disappointing.

In 2008 bought cheaper Whirlpool washer, had to return it to Lowes. ELLL DUMOH (me) buys yet another Whirlpool Washer from Lowes; a Cabrio. The Cabrio ONLY worked 3 years, and started having problems with not emptying or just continuing to drain and beep. The Whirlpool Customer Service lady is pitiful. Yeah... I can SELL you another set of shock absorbers... that might help. I can SELL you a recirculating pump or a drain pump... Pitiful, sorry attitude. Goodbye Whirlpool.

Some years ago I bought a whirlpool water heater from Lowes and the thermocouple went out. No big deal, so I thought. I went to Lowes, picked up a new one and tried to replace it. It wouldnt thread even though the package stated it was for my model. I went back to Lowes and they gave me another one, same problem. So I called Whirlpool, they said it was a left handed thread and they discontinued it, but they could send me a conversion kit at my cost. So at that point I was 2 wks out so I paid for the kit. I received the same thing I bought from Lowes. I was so frustrated I ripped the thing out and got a new one. That was 2 yrs ago and now I am having the same problem. I called whirlpool and they want me to pay for the replacement part. Mind you, the heater has a 6-yr warranty. I went to Lowes and they wont replace it. They sell items that they dont stand behind. I will never buy another whirlpool item and I will never shop at Lowes again.

I took the time to read the owners manual, and then ran machine (washer wtw5000dw0). Using an affordable HE approved detergent (Xtra), I had no problems. If the washer doesnt fill or drain correctly, look up how to recalibrate it, was easy to do because I did that after transporting it. My clothes are cleaner, and I am using LESS detergent!

Whirlpool model EVLl201NXRQOO, serial no. EWT2423236 - Defective paint on the back of the freezer that caused rust to form and paint to peel off. Whirlpool does not warrant manufacturing defects on the paint. Guess I was lucky for it to be on the back and not the front.

Purchased first water heater in 2008 with 6 year warranty. In 2011, pilot light would not stay lit. Whirlpool told me to go to Lowes and get a new one at no cost. But I had to pay for service to identify the problem and installation of new one, costing $250.00. A year and a half later on a six year warranty, the same issue the pilot light not staying lit. They send a pilot light assembly and we pay the shipping and installation cost of $130.00.Two years later, the same issue begins again. Calling tech support, they determine it needs a third pilot assembly at $30.00 for shipping and $265.00 service installation fee by a certified Whirlpool technician. Worked one day! Im so done with this company!!!! I was promised a call from a supervisor with Whirlpool which Im still waiting on days later. Probably for the best at this point. I think I would feel better if I could beat the crap out of a Whirlpool CEO with it! Im cutting my losses and going with a different provider. I will NEVER again purchase another Whirlpool product!

In March 04 2014, I purchased a Whirlpool washing machine. After having had a Whirlpool for 17 years without any problems with it, I purchased another one. This last one is a piece of junk. I dont even want to talk about the noise, I think it is expiring or on its last leg. They should fire the engineers that invented this model and bring back the other engineers that invented the one I had for such a long time, they far surpassed these space scientists that they now have. On August 8, I called Whirlpool, they sent me someone from Dinos appliances. This man tells me that there is nothing wrong with this machine and that he re-calibrated it. Whatever that means, it is still not wringing the clothes properly. There are only 2 people in my household, so my loads are not very large. I even tried this Drain & Spin cycle after the wash was completed and the clothes still came out too wet. I also have a Whirlpool Dryer and I will not replace it with the same brand. I also will never buy a Whirlpool product again and will make sure that I will share my experience with everyone I know.

My two year old Whirlpool refrigerator died. The compressor went bad. $859 to replace it. I only paid $999 for the fridge. This was crazy. Two years old. Heard it was not uncommon and the technician said most refrigerators warranty the compressor for up to 5 years but not Whirlpool. Had to go buy a new refrigerator.

When renovating my kitchen I went with all Whirlpool appliance. I have nothing but trouble with my fridge. About a year old we had to replace the motherboard at our expense. After having that done, about 6 months later I had to defrost it so it would work again. Now it has to be done every month. All they say we can book another service call at my expense again. All I say thank goodness I kept my old Frigidaire. It saved me more than once. So my advice is stay away from Whirlpool. They dont stand behind their products from my experience.

Does not get your clothes clean. They come out of washer smelling due to lack of water. Darks have Detergent Residue on them. My t-shirts have holes in them. Bought this machine in 2010. Just purchased a Whirlpool top load with a Agitator and I am very pleased with the results. We never had any problems with Whirlpool products but this Cabrio should be taken off the market, faulty advertising. Talked to a Whirlpool rep and she told me to bunch up clothes and place around outside edges of machine for best results but did not see any difference. Do not buy this washer. You will be wasting your money and you will be buying a old traditional washer, with an Agitator is your best bet so you can control the amount of water you use. I hope this helps one that is thinking of buying the new technology top load Cabrio with HE.

It was obviously designed by someone who has never had to clean a refrigerator. There are grooves in the door gaskets seemingly making their sole purpose to collect crumbs and mold with no obvious way to keep them clean (No, Q-tips dont do it). A layer of ice forms below the basket in the freezer (bottom freezer) which, when it melts, soaks the kitchen floor. Ice must be chipped out at least every two weeks to avoid flooding.

We purchased a Whirlpool refrigerator in 2010, model #ED2KHAXVB01, side by side with ice maker. Fortunately, we purchased a 5-year service contract at the same time because the ice maker has broken twice. Unfortunately, I have had to replace the shelves while still under warranty quite a few times. The sides of these glass shelves are made of poor quality plastic and crack constantly. The drawers are the same way. The refrigerator is no longer under the warranty and Whirlpool wants $109 per shelf. I told them I would pay for replacement shelves only if they could send shelves that were made with better quality materials. Otherwise, I might be spending $1000 per year replacing shelves. The Whirlpool representative told me there is nothing that they can do. I see many people with this problem posting complaints on the internet. Do not buy a Whirlpool refrigerator. I have been married for 37 years and never had to replace one shelf in any refrigerator and still have a 40-year old refrigerator in my basement with no broken shelves!

I purchased Whirlpool french door refrigerator wrf535smbm00 at the beginning of this year and it has really made my house an unpleasant place to be. My main complaint is that it is very, very loud, and seems to vibrate through the whole house. It runs most of the time at a level of 60 dB, which might be considered a low noise level for a mechanical appliance that runs occasionally like a dishwasher, but is quite loud for an appliance that, according to their own specs, runs at least 40% of the time. Nobody wants to notice their refrigerator. They just want it to work.Which brings me to my second complaint, the temperature control is all over the place, generally ranging from 25-50 F. I find it difficult to believe that the government, which always seems overly concerned about the temperature of restaurant food, or the pasteurization of cheeses doesnt care that an appliance nearly every American household has doesnt necessarily do its job, and isnt required to display internal temperature. The old-fashioned set this dial to an arbitrary number and hope its cool enough is not charming.Finally, though the finish is listed as stainless steel, mine started sporting tiny rust spots after only three months. Whirlpool states that Cosmetic issues are covered by the manufacturers warranty for the first 30 days of ownership only. After the first 30 days any repairs for cosmetic issues are the consumers responsibility. It seems as though they know theyve used a low grade of stainless steel.

We purchased a stackable electric washer/dryer unit and received in October. Had issues from the start. Called Whirlpool in Dec 2018 and they sent out their contracted service company. Told us they were ordering parts. Never heard from anyone. Called service contractor and they said never received parts. Called January. WP told us that because it was a new model, they didnt have the parts. We asked them to replace the unit. WP called us and said they would replace the unit and it would arrive in late January. NO CALL. Called 2/22 and said, no similar units available. Ask them to upgrade me if there were units available. Said they would and the inventory of the upgraded unit was promising. Would get a call from delivery company for a 3/6 delivery and install. 3/2: Called because hadnt heard from anyone and called WP. Today Katrina ID # ** tells me they are making the new upgraded unit with an anticipated delivery of MID MARCH. I just about flipped my lid. I asked for a supervisor of which she said she was a SR support specialist. I asked that this be escalated and I get a call regarding status. She advised that she would inquire and call me back. Likely shouldnt hold my breath or try to call back because you are on hold for up to 1-2 hours. Just to clarify, have never had an issue with Whirlpool. Every appliance we have in our home is Whirlpool. I just cant believe this experience. I am going to the media on my next stop.

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

My son purchased a Whirlpool Cabrio washing machine about two years ago and now it doesnt work. It was an almost $1,000 machine. You would expect a higher quality product. I always bought Whirlpool products because they were so dependable so I recommended my son to go with Whirlpool. Big mistake, the panel lights up but when you press the power button, nothing happens. I do not recommend this machine to anyone. Im wondering if anyone else that has purchased this has had the same trouble.

Whirlpool 70328 215 IMFRESH ROY 5S purchased on 14th Feb. 2016. It has stopped cooling on 11th April 2016. Complaint lodged on 12 April. No serviceman attended and not connecting toll-free number. Never, never go for a Whirlpool refrigerator.

Purchased from Home Depot and self-installed. That part was not too big a deal but after installing this stove we started a journey of irritation, aggravation and general dissatisfaction. This stove has the standard layout for burners that seem to be common to most low-end stoves. Two huge burners in the front, a simmer burner at the right rear and a general purpose burner at the left rear. Thats all wrong for me and our set up. I want a large burner at the left rear and general purpose every place else. Can you alter the standard configuration? NO! Not without some major alterations to the stove top.Next are the grills or cast cooktops (2 each). They are a bit cumbersome when cleaning the stove but doable. The real problem with the grills are Whirlpool decided to save money by skimping on this feature. The grills are not a stable cooking platform for smaller pans and it turns out Whirlpool recommends square pans for this stove. SAY WHAT? I have pans and skillets from my grandparents and they are ALL round. Thats how that stuff is made. ROUND! The grills design is unstable for any round pot, pan or skillet, if its diameter, is 6 or less. Kiss that excellent saucepan goodbye if you have this stove. My current solution is a piece of light expanded steel over the burner areas.Keeping in mind we use Propane as our heating gas. The adjustment of the flame temp on the four burners is non-existent. They all are either on high, medium or low. There seems to be no fine tuning with these burners. At the end of the day go look for something that is NOT a Whirlpool, LP gas range Model #: WFG515S0EW. You will be better served and less irritable with almost anything else. Even a campfire in the yard is a better choice.

I really like my new 5 burner gas double oven gas range made by Whirlpool. Except for 1 minor flaw where the backsplash panel warped at the beginning and was promptly replaced by whirlpool I have had no problems with my range, love having 5 burners and a double oven. Plus the left front burner has a much bigger burner with higher btu which helps water come to a boil way faster than any other ranger I have ever had. That is a real nice feature and I really like having 2 ovens, When cooking on an average day for my small family there is no need to heat up the big oven and the little oven is just the perfect size to bake 1 or 2 dishes. And on holidays when I am cooking for more people or many more dishes I have the capacity to cook more items.

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

We bought the Whirlpool Gold series side-by-side about 2 years ago with an ice maker in the door and with this design, the ice bucket is on the inside of the door, which we thought was a very clever design, taking up less freezer space. Well, to remove the ice bucket, we had to use a blow dryer because even though you press the button which is supposed to disengage the bucket from the door, it has always been frozen onto the base.Then we started having issues of water leaking from the ice maker. It turns out, that the lever that controls the chute was broken. We called a certified Whirlpool technician to come out to fix the ice maker dispenser lever. Well as it turns out, it cannot be fixed. It is a sealed in the door unit and to fix it, we have to replace the door, a repair estimate for door and labor is approximately $800. That is absurd.I contacted Whirlpool and was told that my refrigerator is out of warranty and that there is not an option to repair the dispenser. There is nothing we can do. I said that according to the repairman, we are not the first to report this problem. When I contacted Whirlpool I was told there is no recall for this item. We purchased the Whirlpool based on the reputation that it has had in the past and the good product we have in a Maytag (which is associated with Whirlpool) dishwasher. Well, never again are we going to purchase a Whirlpool or any of its subsidiaries products. I have read so many unhappy customers here that I cannot believe that Whirlpool continues to make such inferior products or designs.