Purchased a Whirlpool Cabrio Washer a few years back... Started getting F1 error message and just proceeded thru it like most did initially, but now has become pain in the rear just to do one load of laundry as we get the error 2-3 times when we start each load - then on every load w/ 21 minutes left on the cycle. From the looks of things online this is a chronic problem and should be fixed by manufacturer. I called Whirlpool customer service and first person I talked with said they understand it is an issue but no longer are any recalls or reworks on that machine. I asked to speak w/ supervisor and sat on hold until I got one. Was then informed they do know it was a problem but was not something they could do anything about other than schedule a service company to come take a look. I specifically asked if there was at one time a recall or if they were fixing this issue for a while. She said Yes, they took care of some of their customers but are no longer doing that for this model. So basically because I didnt call in at the right time I need to fix my machine myself. I said it will be the last Whirlpool or Whirlpool associated appliance I ever purchase if this is the kind of customer service I can expect... The supervisor just said she was sorry to hear that and to have a nice day. Hopefully enough people read these reviews as I wish I would have before purchasing my Cabrio and dont buy Whirlpool.

We purchased a new home in July of 2011 and we paid extra for the upgraded appliance package, which included a Whirlpool Microwave/Convection Hood Combination unit. We have Model # GH7208XRS3. We use the microwave a few times a week and only used the home 6 months each year during 2012, 2013 and 2014, for a total of approximately 18 months. From the very beginning, we had trouble with the microwave control panel turning itself on and the electronics going through various timing and programming functions independent of any human operator.During the combined two-year warranty period from July 2011 July 2013 (the Manufacturers Warranty lasted one year and the Developers extended Warranty lasted an additional year) we had 5 service calls on the same issue. The Authorized Repair Center repairman called the Whirlpool Tech Line while he was in our home and was told that there was a flaw in the design of this model. They replaced the door and then when it acted up again, they replaced the control panel. In Nov. 2012, after the repairman told us the door needed to be replaced again, we asked for a new appliance since we had the same issue repeatedly and they had already tried to fix it by replacing the door and it was still under warranty. We were told that Whirlpool would not replace the appliance until they had tried to fix it three times and we needed to get a new door again. We were told that because it was the same issue repeatedly, we would get a replacement if it still went bad after the warranty was up. So we had the door replaced again, which did not fix the problem.In late 2014, we again had the same issue with the control panel and made a call to Whirlpools Customer Experience Center. At that time, we were told that the warranty was no longer in effect and Whirlpool would do nothing to fix the issue. Even though it was the same issue that they had attempted and failed to fix while under warranty, the company would no longer stand behind the promise of customer satisfaction and told us they will not replace a 3-year-old microwave. When I asked the Customer Service Rep to speak to a Manager to escalate the issue, I was transferred to the Tennessee Office. When I got the same repeated run-around from the Supervisor, Melissa, I asked that Customer Service Supervisor to let me speak to a Manager and she told me she could not give me the name of anyone else to speak with and hung up on me.I am writing to you to express my extreme disappointment in Whirlpool and the products reliability, the way the company has handled fixing the problem and especially in the conduct of the Customer Service department. Whirlpool gave us nothing but a run-around for the years the warranty was in effect, knowing that this model has a design flaw and trying to do band-aid fixes until the warranty ran out. We were told that our only option now is to pay to have the same problem fixed a fourth time or purchase a new microwave.Whirlpool has trained their Customer Service people to be polite but ineffective and obstructionist on the phone and then hang up on the customer when they cannot resolve the customers issue. I believe that Whirlpool should be committed to customer satisfaction and making sure that their products work as intended and fix the problem that was reported while under warranty, even if it no longer in warranty. Whirlpool should be as disappointed as I am that after three attempts the problem is still not fixed and should be committed to customer satisfaction enough to replace the appliance after three failed attempts.

Whirlpool Cabrio 6600 SW2 - Somehow a coin or two (?) are under the tub. It is not a high pitched sound. Just sounds like the machine is rubbing against the tub or something when it is being used. It does an excellent job of washing and spin drying the clothes, but the noise irritates my wife, which then irritates me. I took the top piece off and can see a coin DOWN there, but cannot reach it. Must I turn the machine upside down and try to shake the coin(s) out?

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

We have had Whirlpool front loading washers for 15 years. The first had a bad bearing problem, that was eventually fixed, but still disappointing. The second doesnt is missing some features that the old one had. All and all I am happy with this washers and do not know of anything better, within my price range.

Bought new from menards. Doesnt work properly, doesnt wash right and cleans poorly. It too bad because I thought I was upgrading from my old Whirlpool washer that was 15 years old so I order the new cogs for the agitator on the old machine and now using it again. Works better than the new one. Sad that whirlpool wont stand behind the product. Might as well be made in china.

All I ever wanted was a nice refrigerator with the ability to get crushed ice from the door. We bought our refrigerator from Lowes several years ago and have had problems with the ice dispenser ever since. Lowes sent repairmen many times and even replaced the one we purchased with a newer model. Whirlpool refused to replace. The problem persisted and we had to continue calling repairmen. The last straw was when the repairman asked to borrow my hair dryer to help him melt the ice that continuously builds up in the door chute. I stopped going through Lowes and went directly to whirlpool for repairs. Since then I have been told that I should remove the ice box and clean out weekly, be nicer in order to get better help and that my husband should do the talking so that Whirlpool will be more helpful. I am so disappointed. Its been a couple of years since I last called for repairs even though we had the extended warranty. I have to clean the chute daily in order to get crushed ice from the door. Whirlpool knows that their engineers developed an ice dispenser with problems but will not admit it. Their customer service is the worst ever. I will never buy a whirlpool refrigerator again.

After having my Whirlpool side by side refrigerator ice maker replaced 4 TIMES in 10 years, I finally found a permanent fix for it: an Igloo counter top ice maker for around half the price of a replacement Whirlpool ice maker. Unlike the Whirlpool ice maker, it makes ice. I promptly removed the Whirlpool ice maker FOR THE LAST TIME, and sent it to the dump, where it belongs. Goodbye Whirlpool! If that is the best you can produce, you will not receive any more of my hard earned money!

Whirlpool Cabrio washer w103386894 - I have had nothing but problems with this piece of crap washing machine. Either the clothes come out soaked at the end of the spin cycle, or it gets stuck in a cycle and repeats. It makes so much noise you can hear it through the whole house. It is less than three years old and now it is leaking water. I had a base model Sears Kenmore that I had for over 12 years and it died from old age. This Whirlpool is pure crap, do not buy.

Bought this machine in Feb 2007 as a pair Whirlpool Cabrio. I loved it for almost two years. The control board went out, Whirlpool replaced it. A couple of weeks later, the F-1 codes started then the F-51 codes. On July of 10, it was code after code. It sounded like a jet taking off and constant unbalanced load. I called repairman and was told to go buy new machine as repairs would start at $500 and since I live in a rural area, no one wanted to waste their time. Two repair techs told me point blank they wouldnt even touch it. We paid $1000 for this machine and we live pay check to pay check. I spent four months trying to get Whirlpool to do something. I kept getting told I should have bought extended warranty. Machine has been sitting under stairs for over year waiting to see if class action or recall can be done. Also when control board was replaced, the repair man told me it was rusting away from the inside out. My husband had to find us a used washer and this thing has done nothing but cost us money. So much for efficiency. Everyone posting here also needs to go to Whirlpools Facebook page and post there.

My 2010 Whirlpool refrigerator stopped working, due to a compressor issue. I need to purchase a new device ASAP.

Whirlpool Cabrio washer Model WTW6500WW1 Ser C02670098 Type 580 is the worst appliance I have ever had. All the bad comments from people are all true! The washer leaves clothes wet. I get F1 error code or it just locks up and I have to unplug it and plug in again, twists clothes up and doesnt get clothes clean. I have always bought Whirlpool appliances because they were good but this washer has changed my mind about Whirlpool.

The washer has a convenient water level feature which enables conservation. The dryer also feature multiple heat/timing features, another conservation plus. Both are compact and easily loaded and unloaded. The multiple alerts at the ending of the dryer cycles are a convenience.

Just bought this washer, its making a lot of noise, sounds like something is grinding (metal, gears, etc). I thought Whirlpool was suppose to be good. I just had my Maytag go out after 18 years of service, thought about getting another Maytag but found out Whirlpool makes those. As many complaint as I see, seems there needs to be a class action lawsuit against Whirlpool for shoddy work.

My company purchased a lot of products in Whirlpool company. We thought the product is good, until the dryer machine didnt work all of a sudden. We call a customer service. After a week the maintenance came in our unit to check the dryer but he said that they need to purchase the other part of the dryer. That was happened last july. Were keep calling the customer service. We cant even count how many times we call them. But unfortunately even them they cant give us an exact date when they can fix the dryer machine. SLOW RESPONSE FROM WHIRLPOOL COMPANY!!! Shame on you guys.

I had purchased a Whirlpool Refrigerator Side-by-Side ED2KHAXVS in Jan. 2013, the fridge had stopped working in the last week in 2014. I am out of a fridge as of today 01/13/2015. I did not have an extended warranty, I have called Whirlpool in Michigan and inquire if there has been any complain about the fridge, my question was not answered! I had bought the refrigerator from Karls in Fairfield, NJ. I found out from the repair person that I needed a new starter and a new compressor, I was surprised to have learn that the major parts do not have any guarantee on them beyond the warranty. WHY IS THIS REFRIGERATOR IS NOT ON THE RECALL LIST?

I purchased a washer, dryer and refrigerator from Sears and it has been a terrible experience! The fridge broke twice, the dryer broke twice, and the washer broke around four times! I was told that since they fixed it last time for free, this repair was on me! If all the items didnt break numerous times, I would not be upset. But for all the items to break so many times, thats telling me that I shopped at the wrong store! The Whirlpool Cabrio sucks! So, I was told by Sears on 8/1/11 to ** it up!

The control knob broke off the washer when it was only two years old. I contacted Whirlpool by email about what happened with the dryer. The control panel is held tight to the dryer now with duct tape and the knob is held on also with duct tape. The knob doesnt work. It is stuck on timed dry so I can at least use it and adjust the time. I cannot use any other setting. It would cost about the amount of the dryer to have it repaired. The customer representative informed me that sometimes things dont last. Im glad for his profound wisdom, but Im stuck with a dryer held together with duct tape. I was offered an extended warranty, but the cost of repair will be nearly the amount of a new dryer. I will seek a different brand in the future.

I purchased (from Lowes) a Whirlpool water heater in 2010 unaware of the recall and problems a lot of customers were experiencing. I have changed (6) thermocouples the most recent yesterday 2-10-2014. The heater still does not work. Is there any compensation I can receive at this date. If Lowes were aware of the problems with the heaters, how can they still in honest sell these water heaters to the public.

Model no. WTW4950XW is a piece of pure junk. Bought this machine 2yrs, 4 months ago. I just replaced it and to be sure not with another Whirlpool. The machine went out. Just quit. Nothing on control panel (computer). Didnt call for service tech as this machine has been crap since I bought it. Tried to return it but couldnt after I first used it. It would only give hot water on 2 cycles and that was on bulk or delicate. The regular cycle would only give warm but actually it was cold. Not enough water for 6 pieces of small clothes on regular. More water on delicate. Didnt wash very well. Clothes were not really as clean as they should have been. I used to only buy Whirlpool appliances but have now switched. They are bilking the consumer with subpar machines.

We purchased the Cabrio Whirlpool washer from ABC Warehouse October 18, 2014. They said if we purchased a washer of higher quality it would last longer. We have bought Whirlpool washers for over 40 years. When our last one only lasted for three years they convinced us to spend more money over 1000.00 witha purchase of a 5 year warranty 6 days over the warranty. It is junk. The bearing went out costing 600.00. They graciously offered to sell me another washer. WOW, everyone is sorry that we have this problem BUT you are out of luck. Are they kidding? I will never buy another Whirlpool. They use to be the top of the line but now I feel we are in a throw away world and talk about consumer rip off. FLEECING OF AMERICA AT WORK!!!!

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

Bought the Whirlpool Cabrio washer (WTW7300DW) and dryer (WED7300DW1) about 8 months ago. The washer always leaves white debris on the dark clothes - looks like detergent. Except I use blue liquid detergent. It seems like the inside, bottom of the drum is deteriorating and sticking to the clothes, since there is nothing that is white in the washer. I have run it through the clean cycle several times with the recommended washer cleaning product (the brand that came as a sample with the washer). That did not help. Also, we have a dog, our old washer used to rinse out a lot of dog hair from the bottom of our socks, etc. My filter for my drain hose would always have dog hair in it. With this washer, there is no dog hair being rinsed out at all. Lint and dog hair is all through the clothes after the cycle is over. Makes me wonder where the dirt is going, then.The clothes are so twisted after washing. Anything with long sleeves get tied up around other clothes. This seems very rough to wash clothes this way. Also, if you dont use the deep water setting, its likely not to get parts of the clothes even wet. I had a gray hooded sweatshirt go through a whole wash cycle and there were spots all over it that never even got wet at all. The dryer power button is very temperamental. Sometimes I have to hit it 6 - 7 times, at different angles, until I hit it just right to get it to turn on. Other times it just turns right on. There are just 2 of us so I only do 10 - 12 loads of clothes a month. After reading all the awful reviews, I fear that these problems, which are becoming evident now, will only get worse. Yet I only have 4 more months until the warranty runs out.

I bought this Whirlpool America dishwasher because it was cheap. Even though Im Canadian, I like patriotism and I could get behind the American flag logo on the washer. Let me just say, if you like when food comes off your plates, and attaches to your cups, then this is the dishwasher for you. It is always a surprise when you open the door to discover which dishes have been cleaned, and which dishes have inherited the food particles from the now clean dishes. This appliance really helps you work on time management as you are required to wash all your dishes before you put them into the dishwasher. 0/10 would not recommend for anyone who wants clean dishes.

Over-the-range microwave hood combo - It is not that it does not work, it just wont shut off! Close the door, it turns on. Touch the side, it turns on. I have walked in the kitchen and found it on! I am afraid it will turn on when I am not home and burn down my house! After reading the poor customer service received by others, I will just replace it.

I have posted on here in the past about the problems with the Cabrio Washer from Whirlpool. Our third top load lid was just ordered since 2011. There is a design flaw where the plastic frame around the lid cracks and causes the lid to hump up. While shopping at a local appliance store recently, I saw a new Cabrio washer and the lid and hinge system has be re-designed. I wonder why?????

This refrigerator is a disaster. You will never be able to leave your home for any length of time for fear of a storm putting your electricity out which turns it off and if it DOES NOT TURN BACK ON WHEN THE POWER IS RESTORED. If you happen to be away for several days you will come back to a freezer that has defrosted all over your floor and your food in the refrigerator spoiled.

I love the brand. I just do not care for the lock lid on all the new washers. I could do without it. I do not have kids to worry about getting hurt. Im looking into finding a brand without a lock lid. I just replaced one before this one. For the lid breaking.

We purchased this washer in 2017, its the top loading Cabrio washer and it has been nothing but junk since day one. Purchased from RC Wiley in Boise and unfortunately did not buy the extended warranty because we trusted that this American company would make a washer that would last longer than 3 yrs. This washer barely washes clothes, leaves a residue on them since there is no agitator, also constantly gets unbalanced or gives and error of LF which means water supply issue when there isnt one. My 15 yr old about has a heart attack when he uses the quick setting and his clothes arent done in an hour and a half. Ive even resorted to turning the thing on to just rinse and spin so things get done sooner, still the stupid washer just sits. I would sell it but I dont want to pass on the pain, so its going to the dump to or to Goodwill cause its not worth the headache. Too bad you cant trust an American company to make a good product. Sad I really wanted to like this washer.

Whirlpool Cabrio platinum washer (JUNK. DO NOT BUY). As mentioned in other complaints, the Cabrio top loading washer is garbage. Sound during the spin cycle is VERY LOUD because of a bearing noise. The clothes dont even get clean, lint all over dark clothes. I am the only person in the household so the machine did not get used as much as a family would use it. DO NOT BUY THE CABRIO WASHERS.

We purchased our fridge February 2017. It stopped working September 2018. It wasn’t staying cold. Under manufacturers warranty a repairman was sent out to assess the problem. They had to order the part that went bad. A week later the came back and “fixed” it. Total time missed at work 1 day. It stopped working again April 2019. It wasn’t staying cold. Under our Lowe’s extended protection plan a different repairman was sent out to assess the problem. They had to order the part. A week later they came back and “fixed” it. Total time missed at work 1.5 days. Yesterday (July 2019) we noticed it wasn’t cold AGAIN. Called Lowe’s and was told they could call it a Lemon and replaced until the 4th time it needed repaired. They would need to send out a repairman and assess the issue and make a repair. Our 3 yr extended protection plan expires February 2020. So we’re probably not going to make it Lemon status within the warranty. The fridge is French Door Bottom Mount model. Do NOT buy this refrigerator!

After just 2 years, the electronic control board failed. The temperatures are stuck on the coldest/high mode for both the freezer and the refrigerator, spoiling some foods. The parts and repair are going to be $300. Whirlpool will not replace the defective part or pay for any repairs. Shame on Whirlpool! Model No. GB2FHDYWQ01.

Whirlpool Cabrio Top Load Washer Model: WTW7800XWO purchased at Lowes 8/26/2010. The lid was broken at the hinge in less than a year and was replaced under factory warranty. Lid falls down and pinches fingers. The second lid broke in the same location in less than a year. Lid falls down and strikes the eye. I’m speaking with repair technicians and researching complaints on this product. It appears to be a design defect that is not being addressed by the manufacturer.

I have a whirlpool water heater. This is the third or 4th time that the upper sensor failure code has come on. Our water heater turns off all the time and we have to fire it back up. In the past few months, it has started pouring water out from the long tube on the side of it anytime we turn it on for more then 10 minutes. The last time we called a plumber, I was trying to get a quote on a tankless water heater. Ive been so fed up with ours and I thought that would be a better route to go. The plumber explained the negative sides to a tankless water heater and explained that our water heater was a really nice, really expensive and fairly newer model. I told him that I had just gotten it about four years ago. He said he could just fix that one. So after looking at it, he acted as if he didnt know what an upper sensor was and told me it was under warranty and that I should call for the parts. Every time we have called for the parts, they send the same box thing on the front of the heater and every time, it doesnt fix it for long before it says the same thing. And now, like I said, the water heater has now added the problem of pouring water out of it. I need help. I dont know what to do. Im tired of not knowing if Ill have hot water or if the water heater is going to pour out water. Im pregnant and worried that if we cant get this fixed Ill continue to have this problem along with having a baby to take care of. Please help.

In 2008 I bought a Whirlpool range from Lowes. About a year ago I began to notice an electrical smell when I would use the oven. I called the repairman in October and he had to replace wires that had melted. The first time using the oven blew a fuse. Repairman came back replaced everything for free and it has worked fine since October. 2 days ago the fuse blew again. When I flipped the breaker in order to use the cooktop there was an arc flash which blew a hole through the back of the panel on the stove where the cord is hooked to the stove and a hole burned in my wall. After reading Whirlpools fan mail I see that there are severe issues with the quality of Whirlpool products. It is a sad day when the names we have come to trust are more concerned with the bottom dollar than with customer satisfaction with their product.

I bought the WP Cabrio washer on 10-18-16 from Lowes. It does not wash well, my dark clothing came out with white spots all over them even after I rewashed them x 3 and the lighter clothing you dont see the spots so you are wearing dirty clothes. Also, it is making a lot of noises while running. WP should pull this model off the market.

Our Whirlpool 40-gallon electric hot water heater, purchased in 2008, has performed fine, until today when it flooded our basement and, of course, did not provide hot water. As the paperwork says, it has a 12-year warranty. What options do we have for repair or replacement, preferably replacement?I was unable to contact anyone on the 877-817-6750 number due to the bad weather. The model # is EE3J40RD045V, the serial # is 0742130246, and the product # is **.

We purchased this one (Wall Mount Model # WMH76719CS) on July 30, 2015. About one month ago I started noticing that a simple large cup of water to make tea or instant coffee takes more than 2 minutes on power 10 to heat up enough. It used to take about 1 1/2 minutes. Now, Im no mathematician, but I believe thats about 25% power loss in 6 months. The same applied to any convection dinner Ive tried to cook lately. Im going to say that Im dissatisfied with the convection feature and would rather just bake the silly food in the regular oven as usual. Any planned-overs trying to re-heat is taking much longer as well as melting butter. I do not have much confidence in Whirlpool microwaves right now, and may never again.

Whirlpool Duet Washer Trouble. Im having the same issue as Tom in Oakville. The F35-Sud errors pointed to the pressure sensor - NOT. 2 parts, a technician visit, and $800 later, Im still waiting on a Main Board replacement that is on nationwide back order. Time frame unknown.

If you are on this website, keep reading. You will definitely find many people that have your same problem. We purchased our refrigerator 5 years ago. Since then we have had a leak inside of it which is gradually forming mold that I have to cleanup. The ice maker and water dispenser do not function for months at a time. I just purchased 2 drawers for the same reason as the review on May 5, 2016. The tabs break off of the front panels and the panel falls off of the drawers. Theres no way to pull them out. We paid over $200.00 for two drawers!I spoke with customer service at Whirlpool and read them the 2016 review. Their answer was that you should not believe everything you read. My answer was, How cant I? Its happening to the refrigerator I own. They just kept giving robotic answers. The conversation was that of someone that is in denial of having a problem. They dont care. Instead of at least offering a discount on the drawers, she offered me an over $400.00 one year warranty. Pathetic! Whirlpool has just lost another customer.

New Whirlpool Refrigerator makes roaring noise like a broken engine. Whirlpools 2 technicians listened and confirmed but said that as the refrigerator works they can do NOTHING about it. Whirlpool management would not respond to repeated requests. Dont even get near ANY Whirlpool products!!!

Bought this model #WTW8500DC from Lowes in 2015. Ever since had problems. Stopping in the middle, not starting, recently keeps running water, lid lock issues, had multiple service calls and multiple hardware changes, paid extra for extended warranty from Whirlpool hoping that within a year all problems would be gone after so many repairs. Boys I was wrong. After spending around $1200 between this machine and the extended warranty, three year later after the warranty expired now I am stuck with this non-functional piece of junk and looking for another washing machine. Would love to hear from Whirlpool if I stumbled upon a lemon, or three year is expected life of their $1000 plus machines.

A couple of years ago, we had 2 natural gas hot water heaters installed. We immediately had a service call to replace the thermostat on one of them. Then recently, the other one had to be replaced because of the leaky tank. It was still in warranty, and we had to pay $425 for the old one to be removed and the new one installed. Now, this one has a bad thermostat and the A & E Factory Service is coming tomorrow to install the new thermostat. We have been inconvenienced by this for a couple of weeks as we have no hot water in the master bath. We were just lucky that we had one hot water heater working in the other part of the house. I think that Whirlpool should have paid the $425 for the installation as the original hot water heater was in warranty. Now, I hope that tomorrows visit will be covered by the warranty. Next time we need an appliance, we will not be purchasing a Whirlpool.

I have owned a Whirlpool Cabrio model no. WTW7800XW2 washing machine for less than 3 years. The plastic frame for the top glass lid cracked (on the right next to the spring loaded hinge). After reading that other people have had a similar problem, I contacted Whirlpool about this and talked to its TN call center representative. I requested that Whirlpool repair the appliance free of charge since there is a known defect with it. She said Whirlpool would only offer me a 50% price reduction from the retail cost of the lid plus charge me shipping and taxes. I will not be buying another Whirlpool product as a result.

Whirlpool Gold french door refrigerator. Ice maker stopped working and freezer stopped freezing. 888 complaints on these and they deny a problem.

On 9/28/16 I purchased 4 new Whirlpool appliances from Orvilles Appliances in Buffalo NY. They were delivered on 11/9/16, the refrigerator was installed. The microwave, dishwasher, and range were not installed until Jan. as my kitchen was being remodeled. Both doors were dented; it took 3 months for Whirlpool to send new doors. After installation water began pouring all over, gallons of it; it took a month to get fixed. The microwave door has a large defect and the surface light does not work; it is still not fixed. Six months later it is still it fixed. I feel like I paid a lot of money for defective appliances. Whirlpool is truly a company that does not stand behind their products; they could care less about their customers. I will never ever do business with Whirlpool again. And Orvilles also refused to help; it was a mistake to shop there.

I came here to see if others have had problems with their Whirlpool Cabrio top load washers. I was amazed at how many others forked over nearly a grand ($1000 with tax and extended warranty) for such a heap of nothing. I have lived in the same house for over 35 years, same water supply with water softener. Over this time, I have raised my family and been lucky enough to only go through two washers until 2 years ago when I purchased this Whirlpool Cabrio machine at Lowes. As with others, clothes do not get cleaned. Residue is present and in the creases of the tightly spun and tangled load. After calling Whirlpool and Lowes on nearly day one of my original purchase, no concern was given. Instead, I received the What type of detergent or Could it be your water supply? or What degree of soil does your family have on their garments? A white terry cloth washcloth should not come out grey, even after bleach! My GE and Maytags of the past always did fantastic jobs. They just plain old wore out. As for my new energy efficient machine that takes 86 minutes to wash a load, with expensive HE detergent, an oxy clean pouch, special fabric softeners, I scratch my head wondering how can this be efficient? If a pair of jeans needs pre-soaking, it cant be done in this washer. Instead, I spray the jeans with pre-soak, add my HE products, then fill a mop bucket full of water and dump into the machine 5 minutes after the 86-minute session has started. What a joke! For two years plus, I have vented to my poor husband who thought he was buying me a new innovative state of the art machine to make my life easier. I only wish there was somewhere or someone that I could contact to get some satisfaction for my agony with this poor quality product! Yes, I am venting. I dont have another thousand dollars to spend for a new machine. Believe me, if there were to be a class action lawsuit for this lemon, I would be first to sign up!

The icemakers Whirlpool has been using for the last couple of years are a PITB. They have diamond shaped ice cubes which are great but, whenever the filter nears the end of its life, the icemaker fill tube freezes up. Occasional freezes up just because. Changing the filter, although the old one supposedly has some life left, may/may not solve the problem. Filling the ice tray with foreign ice for a few days thaws the fill tube and it will generally start up again - maybe. Complete waste of time and energy!

My 3 year old Whirlpool dishwasher (model GU3200XTXY3), broke down for the third time. Under extended warranty with my insurance company, a repair tech was sent out to diagnose the problem. He quickly found that the heater had been continuously running (not just during drying), which caused the machine to quit working. He also found that all the wiring inside the dishwasher was spliced together, those two things=fire hazard! Because the heater was always running, it was super heating all the water used to clean the dishes. The vent to release the steam is located on the top of the door (right under counter edge). The dishwasher was producing hotter and more steam which slowly ate away at the particle board under the cabinets. No, we dont have the most expensive countertops, but Whirlpool should be held responsible for producing a faulty product with a faulty design. I have contacted Whirlpool and they claim to have mailed a claim form 3 weeks ago. I have not received it. Posted on social media about it, and was told I must only speak with the person who sent me the form. I would love to, but since I havent actually received any contact from anyone (other than a fb post) I dont know who to contact, at what number, or email!

This is truly a piece of junk! My water heater is 2 1/2 years old and the pilot light will not stay on. Was told that I needed a thermal coupler and paid $30 for shipping. Installed it and still the pilot light will not stay on. Was told again that I needed to replace the main control. Another $30 for shipping. Had that installed and the pilot light stayed on but no hot water. The light was blinking 4x (temperature too hot). WHAT!!? ALL I GOT WAS COLD WATER! Now I was told I need to replace the temperature sensor and they wanted another $30! I told them to I was going to junk it and buy a different brand.

We purchased a Whirlpool Cabrio Platinum washer and dryer from HH Gregg and have had continuous issues with the washer. We have had the lid springs replaced two times since we purchased it and they are out again. I called our service company to ask why we have to continue to replace the springs very 6 months and they said it was a problem Whirlpool was having with this unit. I called Whirlpool and after being on the phone for 45 minutes, they told me there was not a recall, but I could buy the parts directly from them for 1/2 price. This amounts to about $20. The repair cost me about $200 every 6 months because it is a difficult installation. Whirlpool is a terrible company to deal with when you have a problem and they do not stand behind their products. I will never buy another Whirlpool product and will tell everyone I know the same.

There is almost NOTHING I like about my new $1000 Whirlpool Cabrio Platinum washing machine! The clothes dont get clean. Stains become PERMANENT because clothes are spun and matted so tightly together, the 2 inches of water allowed into the tub cant dissolve them. Fabric softener stays a gummy substance because it has to be SUCKED out of the dispenser, not sprinkled out with water. I pin socks together to keep them in pairs, but this machine rips them apart and the safety pin end up in the bottom. My bathroom rugs are shredded. You cant add an extra item if you need to, because the tiny portion of water leaks out. There were DRY spots still on the sheets at the end of a cycle. This machine is an engineering nightmare, sort of like the Edsel. The only action programmed to clean the clothes is a wiggling motion on the floor of the tub. The tub spins so much, energy goes through the roof. Man was given 3 survival elements to assure our existence on earth: water, air, and food. Why are engineers trying to faze out our use of water? This machine has dazzling looks, but NOTHING else. I am so sorry I didnt read all the reviews first. Who would ever think the environmentalists would inflict such pain on our basic domestic obligations! If I dont get my money back or a decent exchange at Sears where we bought it, Im taking the machine to their parking lot and commencing a show with a baseball bat.

2020 Maytag washing machine purchased Sept. 19 2020, never worked from day one. Agitator does not work, makes noise like the machine is struggling to work. Does not rinse detergent out of clothes. Water level is minimal. Went to the dealer Dufresne in Swan River, MB. They sent out a repairman which I paid for, I was informed many customers were complaining that these machines are nothing but garbage. I went back to Dufresne and confronted the sales woman, laughed in my face and told me to leave the store, I was totally taken aback by her rudeness, phoned Whirlpool, spoke to a woman who was very ignorant, I asked to speak to a supervisor who told me thats the way the machines are designed because they are made, DO NOT BUY WHIRLPOOL APPLIANCES, NEVER NEVER.

We bought my Whirlpool top loading washer and dryer back in 2005, and they have not disappointed. Apart from needing a heating element replaced due to poor ventilation one time, both machines are extremely dependable and wash our clothes quite clean!

I am posting to help anyone else avoid the purchase of this machine! The lid has cracked and now warped into a position where it wont stay down. Obviously a washer will not work without being in the locked position, so we have to put several heavy things on top of it just to run a load of laundry. This is not what we expect out of a washer that we paid $900 for only two years ago!!!! We contacted Whirlpool and they offered to fix it for $350. REALLY??? I SHOULD NOT have to pour money into a washer this expensive after two years!!!! I am so disappointed in Whirlpool, this was the entire reason we purchased Whirlpool products, to avoid stress of broken appliances. We wanted reliability for our busy family and instead we bought into more stress.

Right from the start of buying a new suite of Whirlpool appliances, the light over the range burnt out. We figured it was just a bad bulb so we replaced it. Soon it burnt out again, replaced it again, then again it burnt out. I finally called Whirlpool about the problem and found out it is the electronic panel that needs to be replaced... Of course at a full charge to me! I am so over WhirlPoo, (yes I spelled it that way on purpose) every single appliance has had issues. I have just lived without a light over my range because fixing it is more expensive than buying a whole new microwave. Never again will I buy any WhirlPoo appliance!

I was a salesperson for GE for years and thought that they made the best washer for several reasons, but eventually had to purchase another washer which was a Whirlpool. Have been very pleased with my choice and would purchase a Whirlpool again. Washer is 14 years old.

Whirlpool model N40T91 with FLAME LOCK - first failure was the controller valve only within 9 months of a new installation, replaced sort of free of charge, landlord had to pay ship charges. Days and days without hot water. About 6 months later, pilot failed to stay lit. Landlords maintenance man called Whirlpools Customer Service. They had him jump through hoops and finally told him to press a white reset button on the igniter. Okay, that worked. A few days later, pilot went out again, white button was reset, working again. Recently, and more frequent now, white igniter button keeps popping out, and we keep resetting it and relighting the heater, repeatedly, 4 times in one day.Maintenance man comes and calls Whirlpool Customer Service. They advise him to check this and check that. Everything seems to be in order. They say they will send out a qualified service person to diagnose a potential problem, a charge of $200.00. Maintenance man and landlord say, No thanks. Maintenance man goes to Lowes to buy a different brand model. Guess what? Envirotemp Hot Water Heaters have the same control device as the failing Whirlpool. He reboxed it and took it back and said, No thanks. Ill try to upload the images of the water heaters and controller you should stay away from purchasing. Meanwhile, maintenance man went to Menards and purchased a Richmond model, a well known, and reliable water heater manufacturer.

I purchased a Whirlpool Cabrio top loading machine approx 3 yrs. ago. When I first bought it, the machine was super quiet... loved it. I loved the capacity of it. About a yr ago I noticed it started making all kinds of noise, we cant have a conversation downstairs because its so loud. Turns out the bearings are broken. The technician was nice enough to explain to me that its a common problem with those machines. However, Whirlpool is not willing to stand by their product and repair it free of charge. Any other product would of been recalled and repaired. That goes for cars, baby products, and so on. But not Whirlpool, I called and spoke to Andrea in Michigan who told me that there is nothing that they are willing to do. After reading the other reviews and their terrible one star average rating it doesnt surprise me. Shame on me for not researching this product before buying. I hope this saves someone else from making the same mistake. In case your wondering, it cost me $117.00 to have the tech look at the machine. The labor would of cost $125.00 and the part is $251.00........

Whirlpool Energy Saver Dishwasher Model DU850SWPS3 was placed in our new home purchased in May of 2010. We just found that this dishwasher had a slow leak in the seal to the motor which has ruined our hardwood floor, subflooring and part of a laminate beam on the floor directly below the washer, plus molding from the water. The leak has been going on sometime it was not noticed until the floor became so soaked from use over a long period of time that we finally saw the leak, by accident, in the basement which we hardly access. The Whirlpool costumer service was no help and would not entertain repairing the dishwasher unless we paid due to the fact it is over the year warranty. This is clearly a defective part in their product and poor workmanship on their part. We should not have to check underneath our new appliances to determine if we have leaking problems because we cannot trust them from failing. I will never purchase another Whirlpool product and will not recommend their products to anyone.

I purchased this washer brand new just 2 years ago. It started making loud crackling noises approximately 3 mos ago. Yesterday it decided it did not want to spin or drain. Today a repairmen tells me its a wash. The computer screen has gone wacky and the cost to replace that will be well over $400, almost to the penny what I spent 2 years ago. This is not a good product Whirlpool and i trusted you since my previous washer lasted over 15 years. I need a refund and a new washer! Disgusted!

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

The agitator is higher than any I have seen and when we washed aprons that have plastic buckles on them, they get stuck under the agitator. When complained their solution was to use laundry bags to wash 15 aprons in, they are long aprons. Paying a lot of money for the machine and it being commercial I didnt think we would not be able to use it. The whole machine shut down when three of the buckles got stuck. The washer is model # CAE2793BQ and I would suggest that no one purchase one of these machines.

I purchased a Whirlpool washing machine (new) in 2004. From the beginning, I had problems with the spin cycle. I phoned Whirlpool. I paid for service with no reimbursement. With the costs I have had for service, I could have purchased 2 machines. I have had to go to Laundromat to do wash then come home to dry. I have for 30 years only purchased Whirlpool large appliance. My washer and dryer were always refurbished but they were Whirlpool. I have had a (refurbished) Whirlpool dryer since 1997 with one (1) service call. However, this wash machine, purchased new, has been a money pit and a piece of trash with Whirlpool only giving lip service when calling. Also, going to the Laundromat, I have been amazed at how many individuals I speak with are there doing wash because their Whirlpool washer, mostly even newer models than mine, do not work! And they have the same story. There’s no service when you call. Shameful Whirlpool! Buy your parts from us. Maybe your credibility could be restored. But I will never purchase your Whirlpool or other names under Whirlpool! When I do get another washer, yours will be put on my front lawn with a large sign of your disgraceful products and service!

We bought a Whirlpool Gold French Door refrigerator in 2010. Just when the warranty period passed, the refrigerator started leaking water from the bottom floor. Initially, it only leaked about once per month. But as time passed, the refrigerator started leaking more often, and now its leaking every 2-3 days. I saw many people complaining on the same problem and some of them even submitted since 2006. I dont know why Whirlpool doesnt resolve this issue in many years.

Purchased the fridge in 10/2014. 3 weeks later, condenser died and all our food spoiled. 1 year later, no more warranty, starter died, had it replaced for $280.00. Compressor died today 5/2019. Company refuse to do anything about it and will cost close to $1000 to replace compressor. Stay away from this company and their products.

It is a top of the line washing machine. I have had it for almost four years. It is the best washing machine I have ever had. I have really enjoyed it, because; I am able to wash my comforters in this washing machine.

Do not buy Whirlpool appliances! Save yourself the trouble. I have a Whirlpool free-standing gas range that I bought when I purchased my house in June 2008. Just the other day, the oven stopped working. When I went to turn the oven on, I can hear a clicking sound but the burners in the oven do not ignite. I called Whirlpool and they offered to send someone out to fix the problem. By the time someone comes out and charges me for parts, labor, etc, I will probably have paid half of what I paid for the range when it was new! I also had the same thing happen with a Frigidaire refrigerator last year! The bottom line is that brand name appliances are not built the way they used to be. I am actually looking at buying a Samsung or some other model and try my chances with them!

We had purchased matching Whirlpool Cabrio HE washer and gas dryer. Both appliances were worthless. Same problems as everyone else. Clothes did not come clean. Had to put it on bulky items just to clean the clothes due to lack of water. Funny how all the older machines that actually put water into the machine cleaned clothes. Went through a motherboard (computer) for both the washer and dryer at $250 each. Washer had repairman out at least 12 times over 3 years. Never again would I purchase a Whirlpool. We went to our local appliance dealer and purchased a Speed Queen. These are like the older ones. THEY WORK! They use the correct amount of water and wash your clothes in half the time. 22 minutes per load! You can open the lid while the water is running in and load your clothes. Gee, what a concept. Only company still making them in Wisconsin, United States. Go Wisconsin! They back their product with a 20 year warranty. What?? Who does that anymore? Companies who stand behind their product. We love our new Speed Queen.

The dishwasher is less than 2 years old, out of warranty, and will not start. The repairman said the problem is in the electronics. It would cost $500+ to repair.

The new? improved model with NO center agitator is the worst - clothes tangle badly and the load becomes very unbalanced, wobbly and noisy. How I got talked into this model by a Sears salespeople was a big mistake!!!

Bought new Whirlpool duet washer 4.0 couple years ago. Started making load noise. Started checking and its the rear bearing and sounds of it will cost more to replace than to buy a new one. Found this page and after reading review after review, I will not spend a dime to fix the junk product from Whirlpool. Going to put in the dumpster and never buy another Whirlpool product. I have never seen so many complaints about a product and many being the same bearing problem. Where is our recall process? Its ok to rip off people over and over with no consequence. And why do large chains keep their product? Guess theyre in on the rip off.

DO NOT BUY THIS MACHINE. Mine is less than 2 years old. First one month after warranty expired, the clear lid cracked...$350 to replace! Then a few days ago a rusted circuit board came apart and jammed up my washer. This should NEVER happen. I contacted customer service and they told me that they are not covering this problem and that the service call is $175 and cannot estimate the repair cost. They also could not send a repair person out for 5 days. The washer has not been repaired yet so I do not know the entire cost but it will be expensive!

I called Whirlpool to have my dishwasher and fridge fixed. I knew exactly what was wrong with my fridge. I asked how much it would cost and was told $129.99. I asked why so much. I was told that it included the labor and service charge. I asked if I would need to pay for both units if I did it the same day. She said that the company provided a 30-dollar discount. I decided to only service the fridge at this time. I spent the entire day today, waiting for the service person to come. And when he showed up, I told him that the fridge needed a computer board. He then started telling me that it would cost $200 for labor. I explain that I was told that it should be $129.99 for service call and labor. And he said, No lady, its $70 for the service call and labor is $200. I then called Whirlpool where I spoke to multiple people within a forty-minute call to explain that this is absolutely wrong and that I am not going to pay for the service call. I then spoke to a Niki (3544) who is supposed to be a manager, who basically said my problem now is with the service company, not with Whirlpool and that there is nothing they can do even if they misquoted me. I agreed to pay $129.99 for service and labor, not an $70 service plus labor. I am so upset because I have been a client of Whirlpool for ten years. I have called for service on multiple items in my home, and I have never had a problem. This is so outrageous. I absolutely expect Whirlpool to rectify this mistake. I am also going to report this matter to the BBB and to Fox News. Whirlpool representatives should be able to provide a quote for one thing, and then when the service comes to your home, its a different amount.

I’m a 69 year old married man who has probably owned about 8-10 clothes washers during my life. I purchased my first Whirlpool washer about 1 1/2 years ago (Cabrio - model WTW8500DC2). It began leaving sediment on my clothes immediately, even though I followed the specific washing instructions. Whirlpool sent 3 different repairmen to fix the problem, each indicated there had been problems with this machine. None were able to fix the problem. When I called Customer Service for the 4th time, they refused to discuss the problem. They said there was nothing wrong with the machine, it was my problem, I must have too much “lint” in my clothes. Haven’t had that problem for 69 years, but this was their way of handling the problem. They refused any further help. I would discourage everyone from buying a Whirlpool product. I absolutely do not back their products. You are on your own!!

Four years ago, my wife and I also purchased a Whirlpool washer and dryer set, washer model no. WTW6600SB2. Within the first year we had to replace both pumps twice, user interface, and control board. (I think that’s what it was called). Of course, that was all covered under warranty. But I to had to wait a week for the part and then another week for the repairman to make it. The user interface and control board had to be replaced because moisture got into the control panel and caused corrosion on the circuit boards which caused them to short out. Then it wasn’t long after warranty ran out, the whole wash tub and drum just dropped to the floor with a full load in it. I don’t remember exactly what was the cause of it, but I do remember it cost me $580 to fix it. Then it wasnt more than two weeks later, the repairman had to come again and replace the control board again. There went another $600 for the parts, labor and service call because this time they had to come from 40 miles away and it’s a minimum fee of $89 just for them to drive up here and another $60 for diagnostics, and then the part and their time to install new board. I paid for this machine twice in the first year and a half. Then after all of that, it was finally working like it should and worked great for about 6 months, then came the UL,LD, and Lid Lock codes over and over unplug, plug in, unplug, plug in. That lasted for about a month, and then all of a sudden, it straightened out. And we only got the occasional UL code. Now in the last year, I have had to replace the drain pump twice and then the drum and motor dropped on the shaft allowing any loose change or other items if accidentally missed during pocket searches to fall into the outer wash tub and get sucked into the drain pump and causing a quarter to be shoot through the drain pump making a hole and caused my laundry room to flood. Well, I decided I wasn’t going to buy another part so I used a plastic repair kit to fix the hole and got it up and running. A week later, the washer won’t wash. It will fill and that’s it. So upon my own diagnostic, I came to the conclusion that it was the user interface that went out due to corrosion I found on it. So for another $120 I can fix it, but I’m not sticking another dime into the washer, nor will I ever buy another Whirlpool appliance. Once all of my Whirlpool appliances die, I will replace them one at a time with LG. I to contacted Whirlpool about my problems and all they did for me was send me an extended warranty offer for 50% off, really that’s it, that’s all I get is a big GFY after all the money I have stuck into this piece of scrap-metal. Well, never again will you have my business as long as I live. Whirlpool, you need to take your hoo-ya and do something about all of these complaints.

Its an IKEA double wall oven. Top oven is convection, bottom oven is regular. The cost was half of what a single wall oven was at other stores. It is very simple without a lot of fancy timers and extras. Its great for cooking a very large meal when you need two ovens or have recipes that need different temperatures. I was able to shop entirely online to the store in another city and have the wall oven delivered for minimal charge. I dont mind paying more for better quality, but it seems increasingly hard to find. I purchased my no-name double wall oven from IKEA in 2010 for around $1000. That was almost half the price of a name brand single wall oven. Apparently the oven is made by Whirlpool. Self clean option works well. You cant beat it for putting on a great big meal where items require cooking at different temperatures. Both ovens are full size so you could cook a giant turkey and a ham at same time. Never had a problem with it either.

My complaint is basically the same as all the others. Clothes do not come clean in my brand new Whirlpool washer. Ive had two other Whirlpools, and they were fine. This one, however, is a piece of junk. One of the main problems is that the washer is designed to use only lukewarm water, even on the hot setting, it does not use hot water. Another problem is too little water. Another irritating factor is the constant locking of the lid. Another problem is the constant starting and stopping of the agitator. This cannot be good for the motor. Im at the point of giving away my new washer which Ive had for exactly one week. This is a totally inferior product, and I feel that I have been really ripped off.

I have been using this brand for many years. My first washer lasted for 30 years..so I will stick with what I know is reliable. It is a great machine. Very simple. I dont need anything fancy. 3 different cycles to choose from.

This Whirlpool top load washer has been an awesome product. I have had it for 9 years and havent had a bit of trouble. Its very quiet and very reliable. The only maintenance is running a cleaning tablet on the cleaning setting once per month, and it tells you when its due... No musty smell problems that I hear from people with front loaders. Its a great product.

Whirlpool Gold with bottom freezer, had it for about eight years and no problems. Great seal and great storage space. Also plenty of space in the freezer. We are a family of four. It is extremely quiet. There is flexibility as to how to mount the shelves and they are easy to clean. I have never had any spoilage.

Gas control not working. I have replaced the thermostat twice in three years. Now, the hot water tank pilot will not light. The igniter works; a new thermostat has been properly installed, and the pilot will not light. The gas is on, and the tank has functioned. I just want a new gas control.

My Whirlpool oven (Model WFG505M0BS0) stopped working - the bottom oven part (the top burners were OK), the display on top functioned normally, but no fire came on. I called Whirlpool, and then I accessed Whirlpool online and scheduled service with their official service representative - Flamingo Appliance Service ** for September 9, 2020. When the repairman arrived on 09-09-2020, he opened up the stove and checked it, and he told me that a computer part needs to be replaced, as well as the igniter, and the cost would be between $400.00 and $600.00 (I dont remember the exact amount), I told SEVERAL times, maybe its just the igniter (for which the cost would less than $100.00 AND already included in the $134.95), but he insisted that the computer needed to be replaced, I did not like the way he explained it to me, it did not make sense.After that I was planning to buy a new stove, as the repair was too high. But, I decided to try to change the igniter myself before getting rid of the stove (the igniter cost was $21.00). I just got the igniter recently, and installed it, with help from YouTube, and what do you? THE STOVE IS WORKING!!! This is fraud!!! FLAMINGO APPLIANCE SERVICE ARE THIEVES, AND BY ASSOCIATION, WHIRLPOOL, WHOM THEY REPRESENT ARE THIEVES ALSO. I shall publicize to the best of my abilities: NOT TO BUY WHIRLPOOL PRODUCTS!!! This was not a mistake!!! This is the way they rip people off!! Either by paying exorbitant amounts for unnecessary repairs, or by buying new appliances when the old ones are still good. Dont buy Whirlpool!!! Dont use Flamingo Appliance Service. Theyre both fraudsters.

These machines are designed to clean your clothes by rubbing them together which they attempt to do in a minute amount of water. They destroy the fabric, pull the seam out of shape, wrinkle them beyond the point of wearable, do not get them clean and do not get all the detergent out. I have had clothes come out partially dry. They also do not dilute the fabric softener, leaving unremovable stains on your clothes. In addition, they take forever to do a load of clothes even without the extra rinse you need if you want any hope of getting the clothes rinsed. The dryer is the slowest dryer I have ever had. The steam refresh that is supposed to get the hideous wrinkles out of your clothes does not put steam into the dryer. Instead, it sets the dryer to the highest heat so that those clothes you did not want on high heat are now getting it; then it shoots bursts, yes large bursts, of water on them. Your clothes come out a combination of still wrinkles and wet. If you hear of a class action suit, please contact me. These machines should be recalled.

Hello, Here is our story. We bought this refrigerator Whirlpool - 26.2 Cu. Ft. 4-Door French Door Refrigerator through a local reputable retailer. After 16 months we started to have problems with ice melting in the ice bin. We continued to have problems related to cooling/freezing within the refrigerator to the point where almost all the major parts were replaced. The good news is the dealer negotiated with Whirlpool to have all repair costs covered after the first visit. I asked about just getting us a new refrigerator and was told Whirlpool requires a part to be replaced 3 (THREE) TIMES before consideration.In summary, the refrigerator could not be fixed and was condemned in agreement with both Whirlpool and the Dealer. Here is the interesting news - since the refrigerator was out of warranty (12 months and now we are at 18 months), they are requiring we pay $600+ for the replacement. Buyer beware - either pay for the extended warranty or risk having to be inconvenienced by having your refrigerator unavailable for days or in our case, weeks!

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

I bought a Whirlpool washer (model wtw57esvw1) about 17 months ago. In that time, the same part has gone out three times. It happens every 5 to 6 months. The part runs 97 dollars plus labor. In the mean time, I am without the use of my washer. They say they are sorry, but they only cover their product for one year. After that, you have to buy their extended warranty so you can get it fixed by them. I feel that if I pay that much for a product I should expect at least 3 years without having to repair every 6 months! I have no washer. I am giving one star only because I have to.

When purchasing a new home, the almost new Whirlpool double-door ice-dispensing stainless steel refrigerator came with the kitchen. This beautiful-looking fridge worked well for close to three years, but gave up the ghost shortly after its warranty expired; designed obsolescence perhaps? Problem was, it would have cost almost as much to repair as it would have to purchase a new fridge with a warranty. So, thats what I did, via a local big-box store. I bought a single door floor model, with the Whirlpool ending up as scrap, the whole incident leaving a bad taste in my mouth. If you have your grandmothers old fridge that still runs, keep it!

Whirlpool contacted me today about a review I posted on their website about the washing machine I purchased from one of their distributors. It was not to say they were sorry for the washing machine ruining our floor or our clothing. It was to say that they will not post my review because the model number is not the same as the one I purchased. Unfortunately for me my model was manufacture discontinued and although they look alike this new model is significantly different than the previous model it replaced (I will believe that when I see it). So they obviously knew there were problems with the earlier machine. I am outraged that whirlpool would stoop to such low business tactics to sell their garbage to people and then treat them like dirt.

I purchased a Whirlpool refrigerator at Lowes after my 16-month-old $4000 Samsung died and Samsung didnt care. I thought I was purchasing a better product. Six months old and the Whirlpool died. Service tech came out, said he had to order parts. That was on 1/21/2020. It is now 3/5/2020 and I still have no refrigerator. After being told week after week after week that I had to wait for parts, 3 weeks ago they finally approved a replacement refrigerator. STILL WAITING FOR THAT. Have completely lost confidence in Whirlpool and would not recommend the brand to anyone. Lousy customer service and lousy product. So disappointed. No reimbursement offer for lost food, weeks of having to purchase take out, gas to store daily... HORRIBLE EXPERIENCE.

My $1800 French door refrigerator is only 20 months old and the ice maker has quit working. They sent out a repair person 5 times and replaced parts three of those times. Now they are saying it is unrepairable and are refunding my contract fee of $345 and leaving me with a broken ice maker. When the problem started it was making ice just not dumping it. Now it doesnt even get water. Throughout this all, two months, I have had to constantly call them to find out our next move. They say someone will call me in 2-3 days but they never do. One of The last people I talked to said, Well you can still keep food in it. I dont feel that is reasonable considering I bought a refrigerator with the ice maker in it. I finally called Whirlpool corporate instead of the service contract people to see if anything could be done and was told someone would call me back in 2-3 business days. Well its been a week and big surprise - have not heard from anyone. It is looking like we will have to purchase yet another refrigerator in less than two years. The service people I talked to were rude and really didnt seem to want to help at all. I believed when I purchased this Whirlpool product that they were a reputable company. Sorry to say that is not the case at all. I dont know if the refrigerator is really unrepairable or if they just gave up trying to find the issue. Seems hard to believe a basically new appliance cant be repaired.

Cabrio he washer wtw6400sw2 - I bought this washer about 6 years ago at the time we paid around $900. Now my bearings went bad and the repair person told me it would cost around $300 to $400 to replace the bearings and seal and shaft but that I should call Whirlpool and see if they could replace the part or give me some discount cause it is becoming an issue with all the Cabrio washers. So I called and spoke with a so called manager - as far as I know it could of been a cleaning person there. She told me that she could not do nothing about the issue. So if a lawyer would be nice to help me and the rest of the world that are having all these issues to file a suit against Whirlpool Corp.

I have had my Whirlpool dishwasher for 8 years..I cant use the top rack anymore as it doesnt clean dishes!! I bought a brand new one for my cabin..I hope it works longer (right now it cleans amazing).

I have purchased a Whirlpool Water Heater on May 21, 2005 from Lowes Model number FG1F4040S3NOV, Product number 0730261, Serial number 05181291061. It is one of the Flame Lock heaters that was part of a class action law suit. The lawsuit has been settled however. I have had three thermocouples to date installed and each time the heater has gone out after three to four days. The technicians I have contacted at Whirlpool all have stated something else is wrong with the heater even knowing that this model has been seriously defective from the beginning. They always tell me to do this and that to repair it. I do not have hot water as of the date of this writing. The original problem began June 19, 2011.

WRF989SDAB00 - Our house burnt down in April 2012. We purchased all Whirlpool products to be put back into our house. We had to purchase these items in November 2012 so the contractor could get them into our house because of the cabinets. We did not move into our house until the last week of December and could not use these items until then. In December of 2013, our freezer went out along with the ice maker. I had to fight for Whirlpool to pay for these repairs. They kept saying that it was over the one year warranty. They did accept responsibility and paid for A&E to come look at the frig. One guy came out the first time and thought he fixed it. No. A month later two guys came out. They said it was the condenser. They ordered the parts and came back a third time to replace it. A month and a half later, same problem. A&E came out a fourth time and thought they fixed it again. Nope. During this period, I purchased a extended service plan. I AM TELLING EVERYONE TO DO THIS NOW BECAUSE IT TAKES 60 DAYS FOR THIS PLAN TO TAKE EFFECT. Now the service plan people sent a different company out and he said it is going to cost a lot of money because the things that need to be replaced. The plan SHOULD cover all of this. I called both the service company and Whirlpool demanding that they send us a replacement frig. I believe sending someone out at least SIX TIMES to fix the same problem is ridiculous. Each company is blaming the other and each is saying its the others responsibility to replace the frig.

I purchased a Whirlpool Side by Side Stainless Refrigerator with Water and Ice Dispenser Model #GSF26CYEXY03 and Serial #HR22908384 for $1397 in October 2012 from Orvilles Home Appliance (GREAT COMPANY!!!). It had problems from day one. The handle wouldnt even attach on the one door so Orvilles graciously went back to their main store and took a handle off their display and put it on ours until the new one was delivered. Then there was a $100 rebate on the fridge. Unfortunately, we misplaced the paperwork and sent the rebate in a little late. We apologized for the delay. The end result was a declined rebate. That was one of the reasons that we chose this particular model in the first place.Next, both of our doors rusted. After Orvilles contacted Whirlpool and went back and forth with them, Whirlpool decided to replace both doors. So Orvilles came back to our house and changed them. The guys were baffled about the rust. Thank goodness that it was still under warranty for that. Next problem was the ice dispenser. It makes ice perfectly but dispensing it is another thing. For the last year we have had to take the ice bin out and empty it and start from square one over a dozen times. I contacted Whirlpool just the other day and was told Sorry. Its out of warranty! We can arrange for you to have the Repair + 1 for a total charge of $356 and then you will have a 1 year operational warranty with that. My thought was REALLY!!! While I was on the phone I mentioned the next problem with it.This problem is with all 3 storage drawers. The fronts of all of them have broken off and now I had to tape them. They all broke within a matter of a few months apart. When I talked to the girl from Whirlpool, I told her that I looked them up and the drawers cost about $54 each. Her answer was I know and I am sorry maam. Unfortunately there isnt anything we can do. Thats why I choose my appliances very carefully! I was shocked to hear that. Just to sum everything up... I am so glad that I spent $1400 to have so many problems and then was given the opportunity (which I declined) to spend another $356 to repair an appliance with icemaker problems and then be expected to spend another $150 to replace plastic drawers. This company is absolutely terrible!

My range was made after this date and needs this Service Bulletin part. Whirlpool refuses to ship at no cost. I have spent money on this already to discover they knew the issue in April 2004 yet sold the range in October 2005. Rena in service stated she is the highest authority at Whirlpool anyone can talk to!

We purchased a Whirlpool Cabrio for $1,100 because it was the largest capacity washer in our price range at the time. It has had very little use as I typically take my clothes to the laundry mat since it is anything but large capacity. I have always had problems with the buttons malfunctioning but I went to empty a load and the water was still standing in it - I got code ld and realized that the entire tub had broke off and dropped into the bottom of the machine. Where is the class-action law suit? I want to be the first name on it. I dont have $1,100 to waste on junk. Whirlpool should be ashamed.

Purchased this dishwasher in January 2012, and it stopped working in May 2015. We replaced thermal fuse a year ago and just had to replace the control panel. It worked for 1 day and through 2 wash cycles, but during the 3rd wash cycle, it failed to drain and no power again, which is the same problem we had before. We opted to also replace the control board, just to be safe. Lol. What a piece of junk! Whirlpool is a pathetic excuse for a company, and, judging from others experiences with the customer service department, we will not bother contacting these ** since they clearly have no interest in providing any service at all to their customers. I have had many other lower end dishwasher models, and all of them worked well past the 5 - 10 year mark and never stopped working or required any service. I WILL NEVER PURCHASE ANOTHER APPLIANCE FROM WHIRLPOOL AND HAVE SPREAD THE WORD TO EVERYONE I KNOW. Good luck, Whirlpool. I do not expect they will be around in 10 years. Lol. Do not give your hard earned money to these idiots for the junk that they peddle, and please let your local appliance dealer know why you wish to purchase any other brand BUT Whirlpool. Consumers are not stupid, Whirlpool! You are ignorant for banking on that and should be shut down for your unfair business practices, not to mention misrepresentation of your despicable products.