My washing machine stopped working. I called customer service and got through to Tonya, in the Benton Harbor, Michigan call center. She was wonderful! Living is SW Florida, were having a difficult time right now dealing with the aftermath of Irma. Tonya is an angel during this trying time! Thank you Whirlpool for have exceptional customer service reps! Ill continue to purchase your products as a result.

Fridge was purchased in Feb 2012 from one of the home improvement store chains - along with an extended warranty. It worked flawlessly for about two years, at which point it began draining into the freezer compartment and eventually onto the floor (up to a quart or more at a time). Initially this was a rarer occurrence, happening once every few weeks - but has recently become more and more commonplace.The extended warranty purchased with the appliance covered direct repairs, but am told it will not cover the associated damage to the hardwoods. The local technician contracted for repairs was familiar with the root cause and was able to diagnose immediately upon viewing the brand and style of fridge. As was explained, the drain systems are of extremely poor design leading to icing and blockage of the drain itself during defrost cycles. The only fix at that point is to essentially turn the refrigerator completely off (remove power) and manually defrost the entire thing. The repairs were conducted same day as this review, and as such I am unable to say whether or not the fix is a lasting one.As a note, Ive not experienced any other mechanical or electrical failures or shortcomings with this model. It cools effectively and properly and has not had any history of trouble with making ice - as some other reviewers have experienced. The door containing the ice dispenser (left side) however, does not stay open, swinging shut from full open in a little over 4 seconds. Im still awaiting a complete estimate on the floor, but an initial value on damages is in excess of $1,000. Given current knowledge and the opportunity to choose again, I would select another manufacturer.

Just bought a Whirlpool stove (WFE540H0ES) from Home Depot. Oven gave off so much heat around the handle that I burned myself opening the door... Tech came out said it wasnt supposed to do that. Called into Whirlpool to get clearance for a replacement and corporate says no to the replacement because that is normal. Thats BS! If that is normal DONT BUY A WHIRLPOOL!! BTW... They are owned by Maytag.

I purchased my Whirlpool gas range about 5 yrs ago as brand new. Two and a half years after purchase, I started getting the F2 error and always had to pull the breaker to stop the oven. Whirlpool would not do a thing, they wouldnt even listen to me. So I bought a new control panel. Now once again here it is the holidays and Ive started getting the F2 error when I try to use the oven. So needless to say this is my last Whirlpool appliance. And the Service Officer wont even listen to me when I say I have to buy a new oven.

I bought Whirlpool water heater model #FG1H5040T3NOV about 5 years ago. Burner assembly was replaced two years ago and now, thermocouple was replaced yesterday.

I have an oven hood Whirlpool Microwave. Even though its more of a basic model it has worked terrific so far at about 5 years old. Only draw back is the extremely loud 4 beep alarm upon completion of warming up food. I actually cringe when it is about to go off especially early in the morning. Ours doesnt have the handy options button to turn it off. I have tried other combos with the buttons to see if they have it set up different but to no avail. Does anyone know if you can shut it off. The people who design these things must not have babies because they would think of this at nap time Im sure. Truly the sound this thing emits could wake the dead! I also had the fancy Whirlpool before like some folks mentioned about the handle and door frame cracking and disintegrating. Guess what, so did my parents, sisters, aunts and my neighbors. Definitely a major design flaw or faulty materials. My sister, mom got new doors and they began cracking again within a year!

I bought the stackable Whirlpool Duet. Piece of garbage (model # WFW9150WW). From day one the washer never worked. Error lights/bells kept going on before the second spin cycle. First repair guy couldnt figure it out. And the manual says just unplug and plug the power cable back in. Sure--every time I use it? I called Whirlpool service and they said a new control board was needed without even seeing the machine, which tells me this is a manufacturing flaw. I waited 2 months for the board. When it came, the repair guy put it in and then the machine would not stop filling. So another switch and hose are being ordered. Whirlpool customer service is completely useless. And no one will even discuss replacement. Now Im stuck. $700 out on the first machine and $200 on the extended warranty, which will be useless because Im going to dump the machine. And additional $800 on another new machine which probably wont work either. Oh, yeah, and you have to use special soap, which Ive tried, and got down to using only 1/2 a teaspoon because the suds never cleared. Please tell all your customers never to buy Whirlpool!

I have a 1 year old Whirlpool washing machine (Model: WFW94HEXSW Serial:C04151969). The grease from the drum is found to be the cause of clothes being ruined during the wash cycle. I waited over 3 months for a replacement. The drum arrived broken. I ordered again, and it was then said to be on back order. The water shut off developed a slow leak, causing the water to fill, and flow out the front door, causing carpet damage. We have been forced to throw away good clothes, and pay to have our clothes washed, at a not so local laundromat. We feel it would be more than reasonable to have our washer replaced, and professionally installed immediately.

Ive had my Whirlpool water heater for almost 4 years now and for the last year and a half, I had to have the pilot light lit at least 5 times. I finally got so frustrated around the 3 times and called the company. They gave me instructions on how to light it and to ensure no draft was around the tank. A couple of weeks ago, it went out again and I called. This time I was told to replace the thermocouple. I did that and guess what? Still no hot water. Im a single parent with 2 kids and weve been boiling water just to bath.A service tech came out and told me I need to replace the tank altogether. I called Whirlpool service and they told me it was nothing they can do. Like many of you, I got this tank from Lowes and they will not do anything about it either. Its hurtful and stressful that doing a holiday season, I have to decide to either buy a hot water tank or give my kids a good Christmas. I know several friends and family who has had their tanks a lot longer with no problem. My problem is its a crappy Whirlpool brand with poor customer service.

I purchased a Whirlpool classic range model number rf263LXTS0 on January 2010. We had some hang-ups on the kitchen renovation and were not able to install the appliances until May of 2011.I used the cooktop that evening and was very pleased. I then went to use the oven 2 weeks later and it did not heat up. I asked the contractor to check things out (maybe it was something minor that he could fix). He checked the things that he installed and everything on his end was working fine, so he told me to call Whirlpool.A service technician came out and, within 10 minutes, said that the oven controls were defective.I paid $450.00 for the oven originally. The service technician charged me $136.74 for 10 minutes to tell me that the oven control needed to be replaced (that is the major part of the oven) and that it would cost me $318.41 to replace the part.I called Whirlpool and explained my circumstance and Paula, the supervisor from Tennessee, said that there was nothing she could do. I told her that even if I installed the oven back in January of 2010, the major part of the oven should last more than 1 and 1/2 years.What terrible craftsmanship and crappy customer service. It is sad that customer service cant stand by their product and Whirlpool has to rely on making their money on repairing defectives products. I now have to go out and buy a new oven. I also buy a lot of appliances in my business and I will never buy a Whirlpool again.

This is the information I tried to send to Whirlpool only to get a message that it was undeliverable: I purchased a set of whirlpool cabrio washer and dryer on 10-23-2013 (model numbers WTW8540BW, and WED8500BW). On 01-25-15 the washing machine failed to power up just over 2 months out of the standard warranty. This wasnt the low end cheap models. With cash discounts we paid over $1600.00 for the set. After a $70.00 dollar charge to the repairman we are told that the unit has a bad electric control board (part # W10761026). And unfortunately the part is on back order until March 1st, 2015 as of right now. So if and when the repairman gets the part and installs it, I get to pay him an additional $260.00. My family has always been such a dedicated Whirlpool appliance purchaser but this is wrong.Oh I almost forget, now I have to rent a washing machine at a cost of $55.00 per month until mine is repaired. I believed I was purchasing Whirlpool quality. The type of quality that doesnt need an extended warranty because Whirlpool is made to last correct? Please assist me in making this situation right and restore my faith in the quality I was raised with in Whirlpool products.

Purchased a WDF530PLYM3 Whirlpool dishwasher at Lowes in 2013. Now Ive paid $96.00 to Whirlpools authorized repairman to tell me it needs over $400.00 worth of parts (user interface and control board). He informed me with new digital controls, you MUST purchase extended warranty because they are not built to last and repairs are ridiculously expensive.

My three month old $2,000 combination microwave-oven works a fine, its the just the details that stink. For example: There is no way to turn off the turntable. Yes! a crappy $40 microwave can do this, but not this one. Liquid got into the middle of the door window. You cant open it up to clean, they want to send a technician to clean that up so you can actually see through the window. How much? $150. How was it possible that Whirlpool did not adequately seal the glass? They dont care, and dont care about how it looks.

Whirlpool WFE720H0AS0 - I tried to use the self cleaning oven feature and it cleaned the bottom of the stove but did nothing for the sides, back and door of stove. The top of the stove is impossible to keep clean. Maintaining this appliance is a full-time job. Very bad choice.

I have a Cabrio washing machine and the circuit board has gone bad. I understand from Whirlpools customer service that if your machine was made before 2005, they are fixing the issue. Mine was made after 2006. Even though the problem is the same, Whirlpool will not correct the problem. I was told it was fixed in the new machines. The circuit board goes bad and you have to start and stop the machine at least three times before it will start your cycle, then it stops again at the 17 minute mark and you have to cancel and start the machine again for it to finish its cycle. The error is F1. Customer service acknowledged that this is a known problem for the Whirlpool machines built before 2005 but deny any claim that is is happening to the machines after 2005. Looking at all the other complaints, it is still a problem. I am disappointed in Whirlpool for their customer service attitude and for them not standing behind their product and fixing a known problem. I have always bought Whirlpool products but going forward will be switching to a better company. Shame on you Whirlpool. For a machine I spent $1000 on, the part is going to cost $300 to fix.

My Whirlpool Cabrio washer (WTW6600SG2) is a money pit! After reading all of the nightmare stories concerning this washer one would think Whirlpool would offer a recall and try to correct their wrong doing. Do not buy a Whirlpool Cabrio. It was the worst decision I have ever made! Whirlpool does not stand behind their products. I cant believe they can get away with treating their customers so unfairly, taking their hard earned money for crap like this, then not offering to help after so many have had issues. The Cabrio is loud, doesnt get clothes clean, and is always flashing UL for uneven load (when it works at all). My local repairman has made many trips to fix my problem Cabrio. This time he is at a loss. Ill be buying a new washer and it will not be made by Whirlpool! Please, if you are reading this be forewarned!! You will regret your purchase if you buy a Whirlpool Cabrio.

I know that appliances are made to be disposable, but throwing away a $40 toaster after 18 months is easier to live with than throwing away a $350-$400 dishwasher. We bought a new dishwasher at Lowes on October 15, 2015. It is now May 11, 2016. The manufacturers warranty was for a year. It has been about a year and half since it was installed. Not very long for an appliance that one would assume would last at least 5-10 years. When we called Whirlpool to see about a repair visit, we were told that the trip to the house would cost $105, and the parts could go as high as $250-$300. So if you weigh the original price to the repair price, having it repaired is not rational, but neither is throwing away a dishwasher thats almost new. Its still clean inside. No soap residue or anything in the tub. In the past, by the time we were in the market for a new dishwasher, our old dishwasher looked like it had been through the war. It just breaks my heart to know that a company is so slipshod at making appliances that they wear out in less than two years. There doesnt seem to be any recourse but to dump a perfectly good, relatively new dishwasher in the landfill. We are leaving a very big footprint by doing this.

A factory authorized technician came out this morning and repaired the washing machine. The bolt had come off of the pulley, which then fell off and burned through the guard, and then burned into the insulating on the bottom. The technician said this happens frequently. All that needs to happen is to have a Loctite bolt holding the pulley rather than a plain bolt which comes loose with the vibration. All Whirlpool had to do was spend a couple cents more for the proper part which would avoid potential fire! I should not have needed to have had my home put at risk, needed this service call or pay all that extra money because of their poor workmanship and design failure. This should be a recall item, and all costs incurred by the consumer should be covered by Whirlpool.

I bought this Cabrio Washing Machine just over a year ago and it never drained water when I was doing towels and bed sheets. Life got in the way, and I managed to run smaller loads in the regular settings. Now, the machine is just over a year old and it will not spin unless I put it on the rinse and spin issue. It takes well over 2 hours to wash a load of laundry. From looking at other reviews, this is a big problem. I would not recommend this washer to anyone. It cost a ton of money and was the worst washing machine I have ever used.

I purchased this model 2 years ago. I absolutely hate the fact that there is not enough water dispensed to clean my clothes. Part of my clothes dont even get wet, therefore, I have to press pause and add 2 to 3 gallons of water during the wash and rinse cycles. I do like the spin cycle as long as it does not get unbalanced.Wished I had never purchased it.

After 2.5 years seal around door melted on microwave. Whirlpool Corp sent a repairman to do a safety check. Said unit was ok to use. Plastic seal on for area totally melted about 2 inches wide. Co. Had a recall about a similar problem but our serial number was not included???? Did not want to give them any stars.

IM single, and my current refrigerator meets my basic needs quite well. One drawback -- it has an ice making machine which I never use. Therefore, that takes up room in the freezer which could be used for frozen foods.

When I bought my new retirement home, a Whirlpool dishwasher Model No. DU1055XTVS1 had been installed. After only three years of use, the dishwasher would not complete a cycle except to drain and cancel. The repairman replaced a computer board and when the parts cost and the service cost were combined, they amounted to about half the cost of the dishwasher. I have a PC that is twice the age of the dishwasher and it is still running.

Was weary due to not a name associated with furnaces, but we installed a 100,000 Btu unit 2 stage and have not had any issues thus far.

My Whirlpool electric range has been a nightmare! I bought this thing 5 years ago and I am having it replaced on Saturday! It had a cleaning thing where I put in distilled water and 20 minutes later I could just wipe it out. Not true. I had to use oven off??? Next the oven would not work. Learned if I turned off the power it would reboot itself! The next thing it did was all on its own it turned the temp. from 250 degrees to a full BROIL. The oven now will not heat up to 350 degrees! I just blew $1200.00! On the other hand I did buy a Whirlpool fridge. It has been awesome!

We purchased Whirlpool Cabrio 8.8 cubic ft Electric Dryer with Steam Cycles (Chrome Shadow) Energy Star Model WED8500DC and Whirlpool Cabrio 5.3 cubic ft High-Efficiency Top-Load Washer with Steam Cycle Model WTW8500DC and have had no issues at all, only personal issues, such as me being 54 tall and cant reach the bottom of the washer tub to take out all my clothes, so my husband helps, he is 5 9 tall and can reach in it fine, so we do laundry together now! We have washed very small loads to large loads such as, bedding sets without any issues at all. We love the gorgeous look as well. We have only owned these since November 2015... so about 4 months now, but we are completely satisfied! We have always owned Whirlpool, our old set we bought in 1998 and they finally gave out in 2015! Whirlpool for life for us!

I had my kitchen remodeled and purchased a Whirlpool built in electric microwave and lower oven combo (Models WOC54E and WOC95E). I selected this product because it had the right dimensions for my kitchen and I thought Whirlpool was a quality brand. Well I was completely incorrect about the latter point. Within just a few months, I noticed a drip line in the microwave door, between the outer and inner panel that could not be accessed to clean. I barely used the appliance and had no explosions in the unit that would account for this unsightly stain. When I called Whirlpool, they told me that cleaning and resealing the microwave door was not covered by warranty, and if I fixed the problem, then I would invalidate the warranty on the appliance. I had no choice but to live with this drip line, which has now been joined by others. I can think only that this is caused by condensation and that the door is permeable to moisture.Then there is the oven: When it is in use and for at least 30 min after, the fan on the unit is deafening. Not just a little noisy, but really loud. This is my first experience with Whirlpool and its products, and I would NEVER purchase others. They are not inexpensive and are clearly of substandard quality. The fact that Whirlpool is prepared to put a defective product on the market and then not be prepared to fix problems with the unit is appalling. DO NOT BUY WHIRLPOOL.

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

I have read the reviews and agree with all negative comments. There is no point in investing in a high efficiency machine when I have to rewash many dark items several times in spite of always adding the extra rinse cycle. The clothes appear cleaner if I do not add liquid fabric softener, but as I prefer to use my clothes line when possible, I am unable to use fabric softener. Also, although it is supposed to be a high capacity machine, I only fill the tub about one third of its capacity, hoping this will increase the cleanliness of your clothes. It doesnt seem to help.I have contacted Whirlpool several times and the final suggestion was that pay for a technicians visit, approx. $100, plus extra for repairs. I have decided not to throw good money after bad and to buy another brand of washer. This is the WORST appliance I have ever owned even though it is supposedly high-end. PLEASE do not buy a Whirlpool appliance. If the Cabrio washing machine is an indication of the quality of their appliances, you will be wasting your money.

2 TOP of the line fridges in 3 years!!! First replaced by company CO after I contacted him with outrage as fridge was nonrepairable at 1.2 years of life. Second diagnosed with similar same issue less than 2 years later on same model fridge. This is a rip-off from the company, absolute nonsense that fridge lasts on average 1.5 years with the price sticker over 2500$... Someone should put them out of business!!! This is scam not fridge!!! Stay away from this company, they are not what they use to be, NAME AND QUALITY IS GONE.

Whirlpool Gold Microwave Hood Combo GH5184XPS4 purchased new on 12/2009. The plastic vent cracked where clip attached by factory installed screw. The vent fell off microwave on 10/2011. I spoke with Whirlpool customer service. It is out of warranty and recommended to buy new vent part ($40.00). The new vent broke once again on 12/2011, clip attachment location. Now, the plastic door handle is cracking. The customer service is sorry and recommends to buy replacement parts as long as they remain available. There are many reports of similar instances noted online. I live in a newly constructed condominium where multiple owners have had the same problems with their Whirlpool Gold Microwave Hood Combo GH5184XPS4.

We have had this washer for a little over three years. We are a family of 2 so it gets only light use. The agitator stopped working and the repair was going to be $370! The repair person suggested we contact the manufacturer but they refused to even pay a portion of the repair. Goodbye Whirlpool! And yes, it left white streaks on our clothes as well.

We have been having white plastic pieces shoot out with our ice the past two days. We have only had this fridge for about 15 months. After reading these reviews; I am assuming when I call the service will be terrible as well as any fees for them to fix it. I sure hope it is under warranty; or I will never purchase Whirlpool products again.

I’ve had my washer and dryer for a long time and it has been okay and it’s time to update. It has had its up and down and I may get another just after a while they are outdated and better appliances come along. Smarter people are making smarter things.

Ive had the WDF510PAY dishwasher for 3 years and the circulation pump broke. To be more specific the impeller inside the circulation pump warped and then basically got lodged because it became oblong and then it wouldnt pump water to the spray arms etc. I bought a new pump because the warranty only last a year. The pump cost around 90 bucks. After not even 1 full year this factory replacement pump failed again. I reviewed other Whirlpool dishwashers more expensive and I found they all have this same junky circulation pump. Im not sure of a better dishwasher but I would never recommend a Whirlpool dishwasher again. They also use the same circulation pump in Maytag and many other brands. Whirlpool or whoever designed and sold this pump to Whirlpool should be tracked down and beaten. Simple products like dishwashers should last more than 3 years. The technology is nothing new. A product should last 10 years at least.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

Rust started forming early on our washer and spread quickly. Our house is air conditioned and not near the ocean. There was no reason for the rust. Poor quality finishing is the only explanation. When I called to complain I got nowhere. I wish I could show a photo on this website. It would dissuade anyone from ever buying a whirlpool.

I purchased a Whirlpool 40 gallon gas water heater from Lowes approximately 4 years ago. As of yesterday, the pilot will not light. I assume the t-couple is bad. But in the process of doing some research, I could not help but see that there is a quality problem with heaters manufactured around the time mine was. I dont have the model number with me at the moment. I would like to know what the permanent fix is for these heaters.

The Whirlpool duet model wfw9150ww01 washing machine is a piece junk. After using it for two years, the bearing has gone out on it and it sounds like a freight train. It will cost $600 to repair it. We only paid $575 for it. What a rip off. Whirlpool makes junk only. Buy something else.

We purchased a new stainless steel Whirlpool refrigerator in February 2015. Within the first few days the fridge door handle broke off. Not that we have super human strength in our 60s but the handle connection is a very thin plastic. We put it down to the possibility that the warehouse or shippers may have banged it and perhaps we just didnt notice the initial crack. The handle was out of stock so it took 8 weeks before the new one arrived. This week the freezer door handle cracked! Same problem - cheap plastic handle connector doesnt withstand the vacuum seal. Whirlpools handle connection to the door is comprised of a 1/8th inch thick by 1/4 inch square piece of brittle plastic. This is screwed onto the door. In reality this needs to be metal. Enough said… Check out the handle connection before you buy this appliance. You will wait months for replacement parts as they cannot seem to keep enough of them in stock.

First three months, the main water gasket broke. Thank you for lots of water all over the kitchen. I pulled the washer out to inspect the cause, wanted to see if it was house plumbing or dishwasher. The hose was hanging off the bottom of the machine. During the 45-minute call, I got in my car and drove to plumbing supply and applied a new hose clamp. The next day, a free service call, the repairman said it was the second one this week, Thats just what I would have done, but would not put the machine back. (void the warranty, finish work, etc...not sure how he would have serviced the machine if I did not pull it out for him). A few months later the wheels on the top shelves give way/fall off the rack, so we have those replaced. As soon as one is replaced, the other side falls off... Now, approximately 14 months into installation, the dishwasher does not work. The control panel is flashing and will not start. What a runaround with KitchenAid. We were told there was a recall on the hose clamp (we never got one). We cannot have the control panel worked on until the hose clamp is certified... That will take a week. Then we can call back... What a hassle. We bought this expensive product on good reviews. We are most disappointed. There is very little concern for making the product good. Its incredible that so much can go wrong in such a short time of limited use. Once/day... The hose clamp is just poor engineering. The rest is terrible quality and support

The lower door closing cam has been replaced at least twice. The door continues to make a very loud noise when opening and closing. The refrigerator, a 2007 model came with the house I purchased in 2012. The refrigerator works very good, but the loud noise from opening and closing will wake a hibernating bear. The last repairman (from Sears) told me that the doors had been recalled, but I dont know who to contact or how to go about getting the replacement doors and getting them installed.I have a Home Warranty, and they sent Sears out twice to repair them, but after opening and closing 2-3 times, they go back to the loud noise. I have no idea where the refrigerator was purchased. I dont really want to rate my experience since I think the repairmen did all they could. I simply think this is a bad manufactured door problem, and I just want them replaced. The refrigerator works good, and I cant afford to purchase another just because of the doors.

Purchased 2 years ago from Lowes with the matching dryer. This machine (Model #WTW8540BW0) has more problems than the Bosch front load that I replaced. All of my white clothing gets small rust colored lines on it. I am sure this is because the top of the bleach dispenser is lined with rust. I have never owned a washer that rusts (screws are also rusty). I will NEVER purchase another Whirlpool product.

When you purchase a Cabrio high efficiency washer dont expect clean clothes! But, you can expect holes, torn and, smelly clothes. It takes a ridiculous amount of time to wash. The machine I purchased has a glass top but its dark and you cant see into the machine so that was a waste of money! If you wash clothes in 1/4 depth of water, nothing gets clean. Who even designed this disaster? I had enough common sense to know it was going to be bad but the salesman at Lowes informed me that ALL washers were high-efficiency and getting a tub full of water days are over. I wish we wouldve just paid for repair and kept my old washer. I hate doing laundry with this machine! I use to be able to wash my blankets, pillows, curtains, throw rugs, even car mats with no problems. Not anymore! This machine couldnt handle it. You ought to see my sheets and shirts when theyre done. They come out twisted up so tight I have to untangle them before they go to dryer. What a horrible nightmare of a machine! If we were not out so much money Id send this machine to the junkyard and get a real washer with realistic amounts of water! How are you saving anything when clothes require 2 times to get somewhat clean??? If youre reading this and considering a high-efficiency washing machine, DONT DO IT!! You will regret it. Im counting the days when I can junk mine!

What a piece of expensive junk! Do not buy it, does not clean clothes well, lid broke, lock broke, now it just wont start. Parts are super expensive. Next one I buy will be a basic washer, forget all the bells and whistles!!

Our Cabrio washer often ties clothes into (unwashed/still dirty) knots. They are so bad that it takes several minutes to untangle and then the load has to be rewashed. It also has to be set for hot water when you want cold, and vice-versa. I am unable to do that for the rinse cycle, so all our clothes are rinsed in hot water. It doesnt even get the clothes clean, when it doesnt tie them up. Ive gotten used to it sounding like the space shuttle taking off and managed to shut off most of the annoying beeps. The dryer is almost as bad, it seems to take a long time to dry clothes, and they come out very wrinkled, even on the wrinkle guard. The finish isnt even good on either one. It scratches very easily, and scratches start to rust almost immediately. This is quite possibly the worst piece of junk my family has ever owned, except maybe for an unfortunate experience with a 77 Dodge Aspen. We bought this set thinking we were paying enough that we were getting the best. Never again!

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

I am very sorry I bought this machine. CU rated it pretty good. Nope. 1 - It rarely dries everything completely. e.g., the collars of t-shirts or turtleneck shirts are damp after the load is finished. I have to run the machine again....Energy efficient? Energy schmefficient. and I havent even TRIED to use the low heat delicate cycle. 2 - The cute modern buttons are hard to push in. 3 - The top of the machine doesnt have a level lid... Its curved. Not very useful for setting anything on while you work at any part of your laundering process.

The company I work for bought a new washing machine a couple of months ago to make it easier for those that do the laundry here. The washer was suppose to be this great washing machine which has turned out to be the biggest piece of trash on the property!! Every couple of loads you have to turn it off and hopefully the computer in this Whirlpool cabriolet will reset so you can wash a load of clothes. You have a 50/50 chance it will work. DO NOT PURCHASE THIS MACHINE. IT IS THE WORST WASHING MACHINE IVE EVER USED!!

I am so frustrated with my Whirlpool Gold Wall oven with Accubake system. It has been on for 12 hours in clean mode. The door is locked. My home is full of smoke and even though I turned off the breaker so no power would go to it, it is still locked and hot two hours later. This is the second time this has happened. Not only is it a fire hazard, my walls are hot to the touch. It is frustrating. There is no override of the clean mode. BTW, I was baking when the inside light switched on and off and the door locked down. I was nowhere near it and it was the second batch I was baking so I did not touch the clean button. It did it itself.

I purchased a Whirlpool refrigerator, model # ED2FHAX005, serial #SW1126490, two years ago. I have nothing but trouble with the ice maker. It keeps jamming up with frozen cube. While under warranty, I had it fixed but since then, it has happened twice more. The repairman who fixed it said there was a part missing and a part of the unit was melted. Not only that, but the plastic is coming off on the handle. Nobody at Whirlpool will help me. Too bad, there is no warranty anymore. This refrigerator is a lemon. I am so sorry that I purchased it.

Both are Whirlpool Commercial quality. I got them free from my Co-Op. They didnt cost me anything. They have been here for years - at least 18 years. They have performed flawlessly. I would look for anything discounted. I do not have a problem buying scratch and dent items or last years models. I am not big into brand names and their claims. My sister has gone thru several Maytag appliances in just a few short years. I will not buy any front loading washer, its top load only for me. The dryer has to be electric because we do not have gas in my Co-Op complex. I have been lucky to have only two washer and dryer combos since I was a kid. My family bought a Kenmore washer dryer combo in the 70s that lasted maintenance free into the 90s when I got the Whirlpool set that I have now. I only need the basics side by side set ups. Even though I live alone I do a lot of laundry. Since I have had these commercial grade machines I am more leaning toward another set of commercial grade machines. They seem to be able to take more abuse/over loading than the fancy expensive machines.

Why do I have to select a star? This product deserves none. My experience with a brand new washer has been horrible. I purchased the washer/dryer Whirlpool set from Lowes on 7/1/17. The washer does not agitate and it makes a zooming noise for hours, I have to eventually shut it off and take my clothes to the laundromat. Technicians have come out 4-5 times to “fix” it and replace parts and it is still not working. I called Whirlpool today again and they want to send a technician out again. I told them I cant keep missing work to wait for a technician which is costing me money. But they don’t care. They should be ashamed of selling these manufacturer defected products and then simply refuse to take them back. I wasted around $1700/set on their defected washer and I hope they make it last as they will not sell another product it depends on me purchasing it.I am livid to see how cowardly these big corporations get away with treating the little guy so poorly. But, that is ok, Im in tears right now as I lost my hard earn money and will now have to buy a new washer/dryer set as yours simply don’t work. You just want to continue doing patchwork instead of taking the appliance back and researching what you did wrong to avoid selling these defected products to consumers. Very unfortunate. So if you are reading this review, please don’t buy their products. And big stores like Lowes and HD should stop selling this brand. I’m more angry at the way I’ve been treated by Whirlpool. Rita the resolution specialist made it sound like its my fault the machine wont work. Here is their # 1800-253-1301. If you want to ask any questions about their repair warranty.

I dont know how anybody could write a good review on this machine. It always requires deep water wash and sometimes two cycles to get clothes clean. On regular cycle, it doesnt get water on all clothes. Oh yes, it does save water... Ive pulled things out with dry areas on them.

Purchased Refrigerator (WhirlPool Refrigerator WRX988SIBM03) 16 months ago and noticed the drawer with glass that house the drawers had a crack on the right side. Couldnt believe it was cracked after such little use with just two adults living in the home. Removed it and noticed this was such shoddy design. There is a heavy metal bar in the back with a piece of flimsy plastic that attaches to the heavy metal bar with only a screw attaching the plastic to the metal.I made attempt to glue it since it was only cracked but then the plastic just started crumbling into pieces like a broken cookie. Truly there is something wrong with the quality of the product as well as the design of having this heavy metal bar attached to this flimsy plastic. The quality of this part only leads me to believe what is next with this refrigerator. I am sure there is more to come.I contacted Whirlpool to see if they would replace but of course this is at my cost. Ive had inner parts of refrigerators break over years of use and they get old and busted up over time but this is a new refrigerator and once I inspected the part, I was disappointed with myself for not removing these inner parts and inspecting prior to purchasing. I would have picked up on the poor quality right away. Taken by the outside of this unit and its beauty, and not truly looking at whether or not the shelf can hold a couple gallons of milk. I am here to tell you there is no way this would have withstood the test of time with only a gallon of milk sitting on this unit. Poor design, poor quality and metal attached to raw plastic as it is a disaster.

I have a refrigerator model wrs325fdam. Its not a year old and I cant believe the runaround that I am getting from Whirlpool customer service. Come one day everything in freezer melting. Call a repair person. He come out, diagnose the problems, orders $825 worth of parts for a $899 refrigerator, puts the parts in. On the temperature in the freezer reads 80 degrees. No its order $200 more parts for this scrap metal pile. At what point do the people give a damn at the consumer, its not like anybody has common sense. Im going on two weeks without a ten-month-old refrigerator and four days waiting for them to figure this out. Would not recommend Whirlpool to anyone who cares about fair treatment.

Re: wdf7payw6. I purchased this unit last February. It has never washed properly. In the last month 2 separate warranty service reps have been out. The first one told me that I have not been doing a good enough job of prewashing the dishes so the arms were clogged. While cleaning them, he broke the top arm. When he came back to replace the top arm, he added that the dishes were not drying because I didnt use enough jet dry so I would have to dry by hand, and that the arms were clogging because I didnt prewash well enough. I told him to leave and never come back. I called customer service and they sent out a new company.The rep today told me that even on time delay or overnight settings I must run the hot water prior to starting the unit. And that since the water wasnt hot enough; the undissolved detergent was clogging the spray arms. This was confirmed by your phone support person who told me that for best results thats what I had to do. The result I want is for the thing to wash dishes. It doesnt do that. The current rep ordered a heater, motor pump and spray arms. My previous dishwasher operated perfectly (until the pump failed) for the 18 years I have lived in this house plus however long it was here before I moved in. I will never buy a Whirlpool product or anything built by subsidiaries or parent AGAIN.

We moved into a new home in December. We purchased the home too late to choose our appliances or upgrade over what they install. From the start the oven has been aggravating in both the noise that it emits and the variance in actual temperature. We have had the Appliance Service out twice for these ovens. We are told that the noise which sounds like a wind tunnel is normal. It is there to keep the circuit board cool especially during the cleaning process. The noise is quite aggravating and is amplified throughout our open floor plan to all parts of the house.The temperature variance has been calibrated to be more accurate, but Im not convinced it is on the right temperature yet. I continue to give it a try, but Im not sure if the noise of the fan in the oven is making me feel negative towards using the oven at any time. We hate to have to replace these new units with another set of double ovens, but I doubt if I can continue with this noise much longer. It will definitely not be a Whirlpool or KitchenAid double oven of any sort.

Bought expensive fridge 2009. Now (2015) random very loud rat-tat-tat sounds lasting 5-10 seconds. Very loud. Paid for repairman to evaluate. He said it was probably compressor spring and other springs would probably soon break and would shut down fridge. Said it is very expensive to repair and it would be best to dump the fridge and buy a new one. I called the 800 number located inside the fridge. Jacob at Whirlpool listened to my story and said, Yep, it sounds like the compressor spring and the other springs will likely break. He said he can make me a one-time offer of a full repair of the compressor for only $359.65. We pay Whirlpool and they will have a local guy here come and fix it. We paid by visa.And, via email we get a document that shows we just bought a service contract. This is a surprise to us as we were told were paying to have the compressor repaired. In a few days, a call comes from local repair shop. Guy says, he will come out and check out the noise and see if he can repair our unit. We tell him the noise is intermittent and we cant predict when the noise will occur. We also tell him Jacob from Whirlpool said it was the compressor and that we paid to have it repaired. He says it doesnt sound like it is the compressor and that he cant diagnose the problem if he cant hear the noise. We tell Maytag/Whirlpool via phone we are faxing formal request for refund of our $359.65. Lady from Whirlpool says we, should get a refund in 4-6 weeks. Well, we will see.We are very disappointed in the the short life of our very expensive fridge and we are disgusted with the false and misleading comments made by Jacob of Whirlpool. He told us we were paying for the repair of our compressor and instead we get a stupid service contract. We are in the process of buying a new fridge. And no... It will NOT be a Maytag/Whirlpool!

Whirlpool Electric Convection Range - We purchased a Whirlpool fridge, range and microwave, I am finally sending my review after another of many frustrations with the AquaLift self cleaning oven. NEVER, NEVER buy one unless you love cleaning your oven. The temperature goes to 160 for 40 minutes, it does nothing to clean your oven. I called the co. we bought it from. The fellow said, Oh you should clean your oven weekly, really there are 2 of us and I use the oven maybe 2-3 times a week without spillovers. When I do have spillovers I use the AquaLift waste of time, then have to spray it down with Affresh Spray the co. I bought the range from recommended, still have to scrub hard to remove built on spills. Save yourself the money and frustration. Buy anything but a range with AquaLift self cleaning.

My dishwasher is 4 months old and is having some electrical issues. I have had to call into customer service 3 time to try to get a service call. Two of the service calls did not show up. To this Whirlpool said it was not their responsibility. From my experience Whirlpool does not care that the service calls are weeks out, or that the dishwasher does not work.

Oh what a tangled mess you weave! Inappropriate water usage and bad agitator. The brain is not flexible. Most of all it locks me into a contract of this is it, do or die, you have no other options but to start again. It puts my clothes in abused mode! I say no more, taxes will bring me to buy your competitor. It is very large and way too heavy to move anywhere. No!!! I will never buy another. To the point with all required letters involved, No I will not recommend this (Cabrio washing machine) to anyone, or give it to a friend!

I purchased a Whirlpool Cabrio washer in 2007 and had to replace the control panel for $300 each time twice.

I waited years to buy this machine. I hate it!!! I agree with the other bad reviews. It destroys clothes. There is barely enough water in it to cover the bottom of the machine much less the laundry. Even deep water is a joke. It does not clean. I put it on the hottest water temp and I can put my hand in there and it is barely warm (it is not my hot water heater). My lightweight comforters come out all tacky and grungy in the middle. The softener dispenser (I use vinegar) dumps in the laundry (no it is not over full) (no I do not slam it shut). I can not let anything soak because the machine will drain after a few minutes and all my detergent, scent crystals etc. are all wasted. I feel like I have to take a survey and complete a questionnaire every time I do laundry. Can someone tell me how to put a comforter in there and leave that little middle eye open? They say the water saver is government regulated? Yup I need the government to do my laundry... I believe in saving water. I have a water saver toilet, shower, faucets. However I can not clean dirty jeans in a gallon of water. My clothes do not even get wet. How does whirlpool get away with advertising this machine can do king size comforter? The gentle cycle will tear apart anything I might put in there because there is no water and that blooming thing just twist and turns so it tears anything delicate. This is the 21st century. I think I should not have to babysit my washing machine. Why should I have to readjust everything in hopes it might be almost clean??? Place this here and that there, wipe the lint out before doing dark laundry. This machine belongs in the dark ages. It is so complicated yet it achieves nothing. A big rip off. I so tired of crying over this purchase. I hate this machine!!!

I have a two-year-old top of the line Whirlpool Duet Steam washer. Cleaning performance is adequate at best, but my biggest complaint is about the visible mold buildup that collects on the water dispensing plate as well as on the detergent, bleach and softener dispenser and rubber lining of the washer opening. I have cleaned the removable detergent dispenser weekly since purchasing. The water dispensing plate has a continuous buildup of thick black mold that can only be removed with a tooth brush and bleach and only a small portion of those openings are reachable. I have cleaned the machine with Affresh as recommended and exactly as the manufacturer recommends. Nothing changes! I contacted Whirlpool and was told this was normal for all washers in which some moisture always remains and that I should continue to clean and leave the door and dispenser drawer open to allow the areas to air dry. So, I have done all of those things for the past year and nothing has changed! I received notification that a class action suit had been filed against Whirlpool for this mold issue but have not been contacted in any other way. Not only is this mold visibly disgusting but certainly is worrisome from a health perspective. When I contacted the company a second time, I was told there was nothing that could be done and it was in no way a design flaw on the part of Whirlpool.

I purchased a high dollar built in side by side fridge with custom panels in 4/2005 and had my first service call in 5/2005. Since 2005 we have had 11 service call mostly for defrost failures and over temp. readings. From 2011-11/20/2013 we were issue free then the fridge over temp alarm sounded and we could not hear the fan motor. We had the certified tech come out to evaluate and found that the main control board needed to be replaced. Kitchen Aid/Whirlpool no longer make this item and forwarded us to Core Centric solutions to have a new one built. After speaking with the certified tech who had been out to service our fridge 11 times he informed us that these boards in his experience have never lasted more than a year. We spoke with a customer service rep a Kitchen Aid and asked about a prorated discount on a new built in fridge and she said it seemed reasonable but after checking for authorization informed me I needed to have the board rebuilt at my own cost and that even though this typically takes about 4 weeks to build the fact that our family would be without a fridge is not Kitchen Aids problem. 6/20/2005-over temp/not cooling call (replaced defrost thermostat) 9/2005-over temp/freezer iced over in bottom (freezer decided and drain unclogged) 10/05-over temp/not cooling (replaced fan motor) 9/06-over temp/freezer iced over in bottom (drain line decided, kitchen aid had no advice on how to fix) 10/06-over temp/not cooling, ice build up (whirlpool recommended replace heat kit and bimetal) 11/7-over temp and ice buildup in freezer with leakage (adj to drain pump and defrost drain basin made) 11/07- over temp and freezer icing over (whirlpool sent out a new heater probe) 6/08-over temp and ice buildup (bimetal and foam block replaced) 10/09-over temp, lights and motor shutting on and off (replaced defective board) 10/09- fan making excessive noise (ice buildup found on evaporator fan)11/13-over temp ice buildup in freezer, burning smell from fridge and no air movement or cooling in either compartment (need board rebuilt as on 10/09)Board no longer available from whirlpool, must be custom built at owners expense and will take up to 4 weeks. D/t continuing issues and whirlpool not willing to help the customer with replacement I would highly suggest no one buy a Kitchen Aid fridge.

Sometimes, it doesnt get the dishes clean. I am not sure if it is the dishwasher or the detergent. I recently switched to Finish Quantum Max and it seems to be doing better. I always use the pots and pans cycle. Lots of features, most never used. For instance, china crystal, quick wash, rinse only. The size is ample but the interior design could be better. Solid black, looks good, Model GU1500XTL82.

Purchased Whirlpool Cabrio top loading washing machine yesterday. When wash load is finished (dark load) white marks are visible on the clothing. It appears to be laundry detergent that has not dissolved. I am not happy with this washer and will be returning it.

We bought a Whirlpool Range gas stainless steel five burners on top. We haven’t had it a year and the paint is chipping off of it. It’s starting to rust now. I know stainless steel ovens. You have to clean them specifically with certain chemicals which I do so there should be no reason why it’s rusting and the paint coming off of it. Hasn’t even been a year yet since we bought it.

I have the top load Whirlpool. Its very roomy for my covers, rugs & towels. It has a setting for me to just clean my washer or if I need to just rinse it. It has a cycle just for that. Or if I need a quick wash or a just cold water wash it has those cycle. When my cycles are done it makes a cute jingle sound to let me know its done.

Replaced an old water heater with new Whirlpool 40 gal. short natural gas water heater N40561-403. Good instruction, very clear directions. Also purchased at Lowes was a Utilitech universal gas water heater installation kit. The nipples provided in the kit screwed very loosely into cold water inlet and hot water outlet. I used teflon tape and finished the installation. When I turned the water on both fittings leaked. I couldnt tighten the nipples any further so I shut the water off and drained the tank a bit and reinstalled the nipples with at least 8-9 wraps of teflon tape. Im not sure if that is normal or if nipples were under size or if the cold water inlet and hot water outlet were larger dia. than normal. FYI.

Love the dishwasher, except the racking which has some top rack channels which are too small to be used by glasses, mugs, etc. The Power On/Off should automatically power down when the cycle is finished. Too often when someone leans against the dishwasher while opening the overhead cupboard, the dishwasher will start up because the unit was not powered down.

I Bought the Whirlpool Duet Steam Mod#: WFW95HEDC0 in 2015. I have always wondered how a machine can get clothes clean with less water but liked the idea of the energy star and saving water. However, I found that I was right and the clothes do not get very clean. They do not even get all wet hence the dry feeling when they are done. I just recently got a little frustrated at having to rewash some things by hand afterwards. I started to pretreat and wash out stains by hand beforehand. That helped some. I finally stopped the machine after all the water was done filling it and it tumbled a bit. It looked like it was wet from the window but when I dug through the clothes I pulled out a t-shirt that was almost bone dry. Some of the other thicker clothes like jeans etc. had a lot of dry spots too. This is why the odors don’t come out and why spots and lines are left where the dry meets the wet. There just isn’t enough water get all the material wet. I then proceeded to pour a pail of water in to get all the clothes wet. When I started it back up, it drained some of the water and I still had the problem. So now I get all the clothes wet in the sink before I put them in the washer. It’s amazing how clean they got and they didn’t have the body odors either. I think this machine would be fine if it could be reprogrammed to add more water for cycles. I know that would change the “Energy Star” but this water saving idea is bogus if we have to rewash and add more water to the cycles. At this point I will be looking for a new machine that doesn’t have the energy star but allows me to adjust the water myself. I do not trust these machines anymore.

I own a Cabrio Whirlpool washer. It already had several repairs and never got my wash clean. I complained to the company, no results. This washer is not even a year old. Why will they not stand behind their products?

3/16/2019 washed a load of bed sheets, on the white clothes cycle, put the wash in at 9:21am. Left the house at 12:41pm. Wash still not finished! It was finished by the time I arrived back home, I was gone about 11/2 hrs. I have yet to complete a wash cycle in less than 1hr 15mins. I hate that I have no control over water level, that I have to put detergent in the bottom of the tub, and the damn lid locks! My clothes dont feel clean. Why does big brother get to decide how my wash should be done, when they dont pay my water or electric bills?

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

I just bought a Whirlpool Gas Range from Home Depot on 11/11/2014 and I am having problems with the oven. It is still under warranty and have five year protection plan. I called to have the problem fixed. Two technicians and the oven still doesnt work.

Weve had the 3 door model (side by side fridge with chilled water inside and full width deli drawer, freezer on bottom w/ Icemaker) for 13 months now with absolutely no problems. Chilled water inside frees up door for more storage.

Like everyone else here, I had to call a repairman to have a look at my washing machine after 4 years of limited use (only my husband and I). As soon as the repairman looked at it, he told me theyve had so many calls for this particular washer. He ordered a new part for it, but it did not fix the problem. Thankfully we purchased extended warranty and we were credited the full amount + tax. Today I picked up a brand new Maytag washer. Cant wait to try it. Thanks Leons for the great service.

Purchased this dishwasher in 2015. It has been horrible. The unit has never cleaned sufficiently on any cycle. I run the unit in the evening for the full cycle with heat. It takes almost 4 hours. The dishes are still soaking wet the next morning. We would be considered light use as a family of two. I hand wash any larger pans or cookware as the racks do not support anything of midrange weight or above.With the poor cleaning, I purchased a additional silverware rack and placed it more centrally to attempt better cleaning. It remains mediocre at best. The most recent irritation is the door latch has started pulling free from the unit and remains attached to the door! I have to take pliers and remove it from the door and reaffix it into the housing of the unit. Will never recommend this nor will I ever purchase anything from this company in the future. Sad to see the quality falter to the point of absolute failure.

Bought brand new stove, had issues from day 1, called them after TWO different repair companies came looked at it and said it was a melon, Whirlpool wanted to send a third repair company. Started dealing with this in September, its now end of December and Im still waiting for replacement stove.

Purchased washer 8/2015. Washer quit working 12/2015. Would not drain or do anything. Repairman dispatched and came 3 business days later. (They dont work weekends.) Repairman looked at old receptacle cover and immediately stated, Problem with polarity of plug. No prior problems with plug running appliances. Plugged into it for over 8 years. When I advised him of that then he started troubleshooting circuit board. He cleaned out the machine and got it to work. (Still under warranty) 4 days from repair, and machine quits. Same problem. Wont drain and wont do anything. Call for service again on Weds. morning and given following Tues for service call. Online consumer reports complaints #ered at over 1,7000. Same machine, same problems. Call Whirlpool directly, given runaround. Talk to Whirlpool mgr. (Robert) complaint # **. He states, Have to wait for service. But calls Brandt Melb., FL to try to get sooner service. Brandt calls me stating they have ordered a lid lock and CCU board for machine and will be out Monday. How would they know to order these parts if it is not a constant issue? Im thinking class action suit for shoddy product... LOWES Indian Harbour Beach, FL. Transaction #**.

This dishwasher was a mere 2.2 years old, installed by Lowes-hired technician and the part will cost $168 through Whirlpool, plus labor on both first visit and installation visit. I would not advise to purchase this or similar product from Whirlpool. What really makes me upset is that I learned from customer service that this unit was made in the USA.

I purchased a brand new Whirlpool washing machine only 2 yrs ago. Rather than lasting upward of 10 yrs with normal use as advertised, the machine is nothing more than a giant wash tub. It doesnt Drain and Spin properly. The clothes are still wet at the end of the cycle and I have to either attempt to wring all items by hand or set the machine to Drain and Spin for a second time. Now, it no longer agitates the clothes during either the wash or the rinse. I am SO disappointed in this and very angry that I trusted this well known brand with my hard-earned money. I am also angry at myself for not reviewing internet posts as I am hearing the exact same experiences by others time and again.

I purchased a Whirlpool fridge (model GX2SHBXVQOO) on November 27, 2010 and it leaks water on my floor. I have to keep a towel there or it runs all over. I also purchased a Whirlpool range (model YGFE461LVQ) and the convection fan went on it a month after we bought it. The manufactures warranty does not allow repair people to travel any further than 100 km to repair, something that we had to take the stove in to be repaired. We got the stove back the same day and brought it home. Low and behold, after a short period of time it started to rattle again and got steadily worse. Also, now my one burner on high does not stay on high; it keeps going out then coming back on.I have called the place we purchased these pieces of junk from and they said there is nothing they can do. I also sent e-mails to Whirlpool and they said they will look into it and get back to me. That was months ago. I called Whirlpool and was basically told that there was nothing they can do, that I was to call the repairman. Never, never, ever buy a Whirlpool product.

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

After less than 3 years it was the bearings, of course. Then, being handy and not stupid enough to pay the $500 for the whole piece of crap Whirlpool/Maytag tub, we bought bearings from the PartsDr. We just didnt dig deep enough to know that the strators on these things are made out of the cheapest Chinese plastic and are cracked in the SAME TWO PLACES EVERYONE ELSES IS!!! Imagine that? Will scrub my clothes in a river on rocks before I ever buy a Whirlpool/Maytag Chinese again. All front load seem to have the same problems but at least some other companies admit it and are trying to correct it. Will research and as with everything else stay away from the USA/Chinese rusty, corroded junk.

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

Whirlpool tells its technicians that the front molding piece on their dryers is a disposable part . Basically, it has to be removed to examine the console and removing it will break it 90% of the time. Therefore, the customer will have to replace a $100.00 part simply to diagnose any problems. I now have a dryer with no front panel simply because I wanted to know why a button was sticking.

We bought this Whirlpool two door side by side refrigerator freezer at Lowes at what seem like a good deal, until the problems start. On the refrigerator side everything freezes just as solid as the freezer side. We get to looking and find there is no air filter/damper installed. Try to call Whirlpool and you can forget it. 37 Minutes wait time, then a recording comes back and says now your wait time is 47 minutes, long story short you just get put on hold. No help what so ever. Lowes did give us an air filter. But we still got rock solid fresh eggs in the refrigerator. So it was not such a great deal after all. My wife has one big headache and mad as a hornet at Whirlpool. Bet we dont buy another Fridge from them. If I were you Id stay away from Whirlpool products. Have a great day.

Whirlpool refrigerator model GX5F-IDXVB07; S/N K23918029; 24.8 cu ft purchased for almost $2,000 on 1/7/2014. Before it was four months old I had spoken with store about it frosting up the freezer drawer several times. Finally found it wasnt level and drawer was hanging. Ok figured it was ok, even though I had other issues with it. I took the cosmetic issue of false height on door, which made it seem larger and drastically size reduced produce drawers which made it necessary it actually cut off celery two inches to fit in drawer and door nooks being so narrow that they only fit 3 small condiments in them on the left door and its a trick to fit thing in the right, but since they are deeper can fit a little more. Ok thats my fault for not actually measuring. But who takes condiment jars shopping?The killer is that a leak in the ice maker, lets water/ice to build up under the ice maker on floor of freezer drawer. It then freezes there and if we dont take out the drawer and remove the ice chunks by hand it thaws and runs out in the floor about once a week. The leak began to be worse in August 2014. I understand it will need repair. What makes me really upset is the refrigerator is supposedly a very good brand and I have had so many issues with it that I curse it regularly. A two thousand dollar fridge with this many issues and I am stuck with it. I guess I should have contacted company before warranty went out, but we would get it past a problem for a while, then it would come back. I am just sick that I ever bought it in the first place! I hate it and will never buy or advise anyone else to buy from Whirlpool again. Quality is awful. Looks good on surface, stinks for quality.

The Whirlpool Cabrio washer was extremely expensive to purchase but is rusting out and the circuit board is going out. We have had cheap washers last longer than this one and just to purchase the circuit board will be more expensive than another cheap washer. These boards go out right after the warranty goes out and I think that they are timed to go out. (The exact same thing happened with our dishwasher and after the board was replaced, it has lasted many years). Whirlpool should replace these for free since they do not last that long and are very expensive.

Water heater failed to maintain temperature. ** heads (more than 2) sent out by Whirlpool couldnt fix it! Calling the company was a waste of time! They run you in circles. Will never waste my money on a Whirlpool product again!!!! This was not my first problem with this company, but it is my last!

Brand new dishwasher and first time I started it I noticed the timer showed the cycle taking over 3 hours. When done I opened the door and there was some water in the bottom and the door was very wet. Dishes had not been washed. A glass that had turned upright had no water in it. The soap pod was still intact. I started over again and the same thing happened - two more times. The silverware is not clean either. Its going back!!! Im sure there will be resistance but we will deal with it.

I have had almost all the same issues everyone else who reviews the Cabrio WTW7800XWO washer. Now, the spring loaded lid wont stay up, so we have to use the Downy bottle to load the clothes. Thankfully, I have not had the lid crack... yet. We have had it serviced once while under warranty, that tech told us it wasnt good to wash small items, like socks. Are you kidding me? Now, the heavy lid falls on you while you are loading. I also have the Cabrio dryer, and we have fixed that more than the washer. DO NOT BUY A WHIRLPOOL CABRIO. We bought it because it was the largest unit in the store, but it is junk.

I bought this Whirlpool Cabrio Top Load Washing Machine in December and have hated it ever since. The energy efficiency this item claims means that you will spend a ridiculous amount of time waiting for your load to finish. My family hates this machine and I regularly have to hear about how long the load is taking because the timer adjusts continually. Put in a QUICK load and it said 38 minutes, came back in 30 and it said 24 minutes. It is so frustrating!!! We are afraid to put anything on a heavy soil setting or anything other than quick, because it can take 2-3 hours to complete. I have to schedule a day to wash my bedding and there isnt any convenience in doing a quick load. I am going to have to sell this one and purchase another washer. What a loss!! This machine has been a time and money waster! I will NEVER BUY WHIRLPOOL again!!! I bought this machine through Best Buy.

My Whirlpool Microwave is cracked all around the door handle and the frame with the insulation foam hanging out of the cracks. Dishwasher also having issues. Completely dissatisfied with Whirlpool Appliances. No longer under warranty.

I had purchased a microwave oven on 18 April 11 and they delivered it to me without accessories. As I was a first time user, I didnt have any idea that the accessories are available with the oven. However, when I came to know after 5 months, I asked them about it and they did not respond to me properly. Even when a Whirlpool engineer visited my residence, he did not ask for the accessories for the demo purpose.The warranty paper has not been filled out by the dealer or the engineer; it is still blank. I tried to put a complaint through the customer care number but they did not respond to me properly.

I bought a Whirlpool front loading washing machine 5 years ago, which has given me constant trouble. The computer on the machine is not working. When it is fixed, the machines makes extremely loud grinding noises and frequently the spinner does not work properly, leaving you with heavy sodden wet clothes. Whirlpools guarantee is very limited and customer service is unhelpful except to apologize for your horrible experience. You will have to pay for a technician to diagnose the problem. I will have to replace this costly machine after just 5 years of unreliable service. I would never buy a Whirlpool product again.

Do not purchase (Whirlpool products). Discuss guarantees with salespeople when purchasing! They are total sham and in fact borderline fraud! Purchased $5,000 dollar KitchenAid fridge only to have it breakdown after only 8 months. What they dont tell you is instead of recalling a product they give their repair personnel whats called a notice which means they know there are issues with their products!After much discussion and trying to return the product to no avail, I was told very adamantly my fridge would need to break down another additional 2 times before my fridge would be replaced with a new fridge. Forget about the cost of your food inside the fridge, they dont care! Just beware that their warranties and parts and labour are a complete and utter joke! My advice after much research if you can afford it buy Miele or Subzero product. Its more expensive but a lot less headaches in the long run! Ive eaten the cost of my KitchenAid appliance and went with a Subzero fridge. Dont believe the higher pressure sales pitch from salesman. Youre best to call a repairman and ask what hes fixing more often than not and 9/10 times he will tell you Whirlpool product! Customer service is a complete circus and gong show. Youll get further ahead talking to a donkey!!! Buyer beware! Whirlpool Canada/USA is a joke!!! Dont say I didnt warn ya!!!