Im no longer buying Whirlpool products. They do not all up and are made like crap. My Cabrio washer being the most recent problem. Hinges broke on the lid and the drum spring broke. Out the door it goes! Im having my American made Speed Queen delivered tomorrow, the last Speed Queen I owned last over 30 years.

I purchase almost four thousand dollars on WHIRLPOOL appliances this month. From: HOME DEPOT 114 FEDERAL RD DANBURY CT. Received the items a week and a half ago 9/15/18. I was told to exam item no scratches, dents etc. I did that and had them put in place. I didnt get a chance to use washer until the fourth day. At which time realized it didnt work. Went over to store and they gave me Whirlpool repair phone number. Called and was told they only repair Mon - Fri 8am-4pm. I work every day until 5pm and off weekends. Told Whirlpool repair just that. THEN I TOLD by girl I was speaking to (Whirlpool repair) I COULD JUST RETURN THE WASHER TO THE STORE (Home Depot) MYSELF. I WAS FIT TO BE TIED. I told her, What should I do? Carry it on my back? I have never been treated so poorly. I just moved here from Florida, started a new job. I cant take a day off to have the washer that should have worked fixed. I will never purchase anything else from Home Depot if this is how Im treated, and Whirlpool their customer service stinks!!! So now Im stuck with a washer that doesnt work and a company (Whirlpool) wont accommodate their customer. (Whats wrong with this picture???)

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

Aqualift is a Joke. We recently remodeled our kitchen and purchased a new Whirlpool range model #WFE710HOAE. It came with a feature called Aqualift Technology to clean the oven. The button you push to start it says Aqualift Self-Cleaning. I followed the simple directions and when it was finished I was surprised to find that nothing was clean. I tried it again with the same results. I had to then clean some of it with the enclosed scrubbing pad. You cannot use any cleaners except one that they also send a small sample of. In short, it was like the old days cleaning my mothers oven with a scrub pad and a lot of elbow grease. I spent 30 minutes getting it somewhat clean. I am so disappointed and mad that Whirlpool can just blatantly mislead consumers this way. No one wants to buy an expensive product such as this and have to clean it by hand. You get as good a result if you do not even use Aqualift. My last range lasted 20 years and all you had to do was take a wet cloth and wipe out the residue. Whirlpool is at best incompetent and at worse criminal and purposely misleading with this and other similar models and should recall or be forced to recall and replace these with a working technology. I am surprised that the Federal Government has not stepped in. I would be very supportive and would participate in a class action lawsuit on this matter. As I stated in the beginning, this product is a joke.

I purchased the Cabrio washer during the black Friday sale. The washer was a pretty slate gray. I loved the color and the fact it was a Whirlpool, which I thought meant quality. It was expensive but we were updating our appliances as our 10 year plus washer needed replacing. Big mistake. This washer is terrible. It keeps me stressed. There is not enough water to clean the clothes, my husbands white underwear is always dingy and dirty looking. The sheets are dirty and smells. I try putting bleach on whites before washing and the whites still come out with underarm stains. I tried all the recommendations to no avail. This machine is awful. This was a big financial mistake. As soon as I am able this machine is gone. Will go back to the agitator in the middle, and NOT a Whirlpool. I DO NOT recommend this machine unless you want something pretty because this is NOT a washing machine.

After getting a suite of Whirlpool appliances from Home Depot, I found that they were a little below standard to previous Whirlpool we’ve owned. I found the top of the Electric stove could be easily scratched and the refrigerator was noisy. The stainless steel seemed not as heavy as our other ones. The Whirlpool insignia on the refrigerator came lose and I needed to glue it back on. I’ve always had good luck with Whirlpool and we’ll see how this goes. Just to be safe we bought an extended warranty on the fridge.

Electrolux dishwasher model EI24ID50QS - My husband picked this dishwasher after reading all the good reviews. However, after having issues with it, I tried to post my review and it would not post. I think Electrolux is somehow only posting good reviews and leaving out the bad. I had a technician come out to see why it took 6 hours to go through the cycle along with not cleaning the dishes well. He said I needed to run hot water before starting the cycle and that I needed to prewash my dishes before loading.In other words, its not a dishwasher but a sanitizer. Keep in mind that I rinse my dishes before loading, so I dont have food particles stuck dry on my dishes. So, I used his method of running hot water before cycle is started. It works ok when you dont use your kitchen faucet during the dishwashing cycle. However, the minute you use your faucet, the dishwasher runs for 6 hours! This is the worst dishwasher ever! Not to mention, the control panel is so sensitive that if you accidentally touch a cycle to start, you cant get it to cancel. It is ridiculous. Dont buy! It will be your biggest mistake.

Whirlpool Dryers: I have 2 Duet Dryers and the user interface has gone bad with both several times. I called whirlpool several times to repair. The last time, they refused to repair the dryer. I started having problems with my dryers within the first 6 months of owning them. The repair guy that they sent out the first time said this repair was a major problem with the duets but the company chooses to not acknowledge the problem. They should be required to have a recall. Never by this dryer, you will regret it!

We bought Cabrio washer & dryer a year & half ago, and I hate, hate, hate the washing machine. Every load, it goes off balance. And you have to stop your other work, unlock & wait awhile on that, and rearrange your load of clothes. I called the repairman when I first had it, and he said, Oh yeah that happens, nothings wrong. OMG! How I wish I had returned it. If you dont rearrange the load when the cycle is done, your clothes are still soaked. So you have to re-drain & spin. Total waste of money & a lot of my time. Very very dissatisfied and will never buy another Whirlpool product.

We purchased an over-the-stove Whirlpool microwave in January 2011, when we remodeled our kitchen. In May 2014 after a loud pop, the microwave stopped working. This was Model # GMH6185XVS-1. Of course, the warranty is no longer in effect. I feel a high-end appliance that cost $500 should last longer than 3 years. I will not purchase another Whirlpool product.

My wife and I purchased a new Whirlpool Cabrio Washer / Dryer set approximately three years ago and have had nothing but problem after problem with these units. Weve had multiple service calls, multiple parts replaced, and after dumping hundreds of dollars into repairs and service calls (even called Whirlpool and asked for some help with parts cost but was given the cold shoulder and was told, We cant help you), we are dumping these machines where they belong - scrap heap. I will never purchase another Whirlpool product and will tell anyone who will listen what garbage Whirlpool manufacturers are and absolutely pathetic excuse for customer service and the poorest of quality product. Whirlpool will never be in my familys home again and will never see another cent of my monies.

This double door ice in door refrigerator works fine, my dissatisfaction is on the stainless doors. I am VERY particular on any smudges or points and I do not LIKE the stainless steel environment appliances promo!

Every appliance Ive ever owned has been a Whirlpool product. I am on my second set of Cabrio washers and dryers. I havent had any issues with the dryers, but the washers are a different story. My first washer, bought in 2008, started throwing water and oil underneath while spinning. A service technician came out... I had to have the entire tub replaced seeing as how the bearings that went bad were in the motor/spinning assembly that was built into the tub. I moved in 2011 and needed another washer and dryer. I was told the problem had been addressed. Now Im having the same problem... the washer is so loud when spinning, you can hear it on the opposite end of the house with doors closed! So the bearing problem has NOT BEEN ADDRESSED!!! Whirlpool will not stand by this product!! Loyalty is not a factor in their assistance... Only profit!!!

I stumbled across this page on another mission and had to stop to add my exp. Perhaps I got lucky and got a good set but Im on my 3rd year and my washer and dryer are my friends. I dont have hot water connected to my washer and my husband is a shingle roofer so I often have to wash his clothes twice but my dogs beds come out beautiful and the sanitizer on the dryer removes odors very well. My water bill went down, I can wash my rugs and large comforters at home now. Plus they are so pretty. Im sorry you are all having so much trouble but I love mine sooo much I just had to stop a moment to throw in a little positive.

About three months ago the freezer iced up. Tech showed up stating that the motherboard went out, needs to be replaced, had to wait 6 days for part to show. Was replaced. Two weeks later freezer iced up and refrigerator got hot, lost a lot of food. Again motherboard went out again, had to wait another six days. Part came in Tech replaced the motherboard and installed a heater defroster. Worked for 2 weeks and now the freezer is icing up again. What a pain in the ass.

Purchased on 04-26, professionally installed on 04-29 into a clean, large, well-ventilated area within the garage. Has turned itself off every day since then. Flashes code 10, screen is dirty... Pull the burner and the screen is clean. Called Whirlpool. They tell me to clean it again, so I do. This goes on for weeks... I can now pull the screen and clean it with my eyes closed. I get up a half hour early every morning to complete my water heater re-lighting procedure so my family can take a warm shower!!! Whirlpool gives me a phone number to a repair company. They tell me the repair person will have parts on the truck. I wait four days, guy comes out and says, You need a control valve.... did they send it to you? So I had to call Whirlpool back and order the valve... three more days... Very next day after repair, the thing shuts itself off again! I call Whirlpool and they try and push me off to the repair company, saying they are now responsible for the repair, but in the same sentence the tech says the heater needs a burner assembly. Okay, so you know it needs a burner assembly, but you ask me to contact the repair company to come out and fix it knowing they DO NOT have the parts on the truck? Only after I change my tone and raise my voice does she offer to send the part ahead of the repair appointment! In my opinion, Whirlpool has reached the top of a list shared by other mega companies like Bank of America and Time Warner Cable... Too bad the accolade is for the worst product and customer service. DO NOT BUY Whirlpool.

Brought brand new. Had for ten years. Still going strong. Matter of fact all appliances are Whirlpool. Dishwasher, stove top, oven. I like the sharp clean look in my kitchen. Easy to clean!!

Im very satisfied with the looks and performance of my Whirlpool dishwasher, it is quiet enough that I put it on to wash before going to bed. It is that quiet. Im not happy about the way it was installed, but that is no fault of the dishwasher or Whirlpool, it works great even though it sits kind of crooked in the cabinet. The dishes are always sparkling clean and dry when it is done washing.

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

I have a Whirlpool GoldSeries dishwasher and I wish I had never bought it. I’ll start with the cons because I don’t think any other dishwasher on the market matches this: After 3.5 years either the motherboard or the motor is trash. It will cost so much to fix it that buying a new dishwasher is a better option. I paid more than $800 for the dishwasher + $200 for the install + $75 for the service call to find out it is garbage. I used it about 2-3 times per week, which adds up to about 455 uses total for the time I used it. This shows that the cost of this dishwasher, without operational cost considered, is $2.36 per load (or $307.14 per year if you prefer). No other appliance I have ever owned was as expensive, over its lifetime, as this dishwasher.Whirlpool customer service was difficult to get a hold of and then obstinate and useless. The dishwasher would stink if it was not cleaned regularly. Pros: It is quiet and it cleans the dishes well. Recommendation: Do not waste your money on this. Many other dishwashers are quiet and clean dishes but not many will be this big or expensive. A disappointment over their lifespan.

I am a single mother of a 5 year old and I take care of my mother as well. I purchased a whirlpool because I believed them to be reliable, boy was I mistaken! I am in the military and while on an 8-month deployment I got a message from my mother that the washing machine had stopped working. Here is my mother who cannot drive - with laundry bags and a 5 year old in tow walking to the laundromat to wash, only to carry wet laundry back to the house to dry. Thanks a lot Whirlpool! My cousin in Michigan tried to help my mother with the company and a repairman as much as possible from over the phone. Here is what I got:The washer repairman came this morning. He did the diagnosis but I did not approve the replacement parts and repairs. First of all, he said that the motor control board was bad. To replace it with a new board would be $503 and a refurbished one would be $490.03. If the motor control board was replaced, it might fix the problem with the user interface. If not, the cost to replace that would be $302.62.Apparently there are 4 boards that could have problems. He also said there was a problem with the start button. Anyway, we ended up paying for the service call ($129), but I thought the cost for the replacement parts was too much to justify when we could get a new one for about the same cost. He recommended that we get a Service Contract when buying something new because of the cost to replace the parts.While doing some research online, unless you purchase an extended warranty or have experience in 2M; you will be researching new washers every 2-4 yrs. What happened to built to last? It seems to me all this technology/circuit boards/computers to make things work have degraded the appliance quality.Im sorry for the bad news but I just wanted you to have all the info. Let me know what you think. I know the washer is only a little over 2 years.

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

We got our Whirlpool french door refrigerator with freezer on the bottom (Model: GX5FHDXVY04) in June 2010. In the past six months, the refrigerator portion loses cooling and temperatures go to the 60s or 70s. We found out that by turning the unit off until it defrosts, it will work again for awhile. Weve had water overflow on our wood floor. When this happened the third time, I called Whirlpool to send a repair person.The person I talked to said it could be over $400 to repair and that it would be more economical to get an extended warranty for about $314, which I did. I did not receive the contract via email (it may have gotten lost in spam). The repair man came and said yes, this was a common problem due to a design flaw and that it needed a $6 part to make the water drain smaller - so that too much air didnt get in.It was May 1st before the repair could return to install it. This was done and we thought - expensive but its taken care of. Today, May 5th, the same problem happened and I have to throw away food again. Its the weekend and there is not a repair person available for two weeks - I got an order number and may request that the repair come sooner. To add insult to injury, I found out that the extended warranty is good only up to $450 and not good for any repair that might be needed in a year. Most of the repair goes to travel to get to Fairfield and labor and we have used most of the warranty already.

I knew I couldnt be the only one with these problems. The reviews confirmed it. I bought my Cabrio washer in 2012. Energy efficient, no agitator to catch on clothes, Great. It took me a while to figure out that the machine was eating my clothes and not cleaning them at all. Oh, they smelled fresh. That HE detergent smells nasty. The machine ate the edges off my good towels, T-shirts, jeans. Brand new underwear (thick elastic) was stretched all the way out and pulled. Normal stains and dirt do not come out even with pretreating. I started running my clothes on the delicate cycle, prewashing stains in a bucket by hand and then putting clothes in mesh bag before running the load. They still came out dirty and ruined. When I run the loads, it still registers as not being that energy efficient on the controls. Id gladly trade it back for my old washer. I feel like I have stepped back in time to a time where you washed everything in a tub or bucket. What a waste of time.

No response from Whirlpool, but I did find out what the rust was. Instead of using stainless steel or plastic or rubber, the inside light frame is made of a cheap metal that has rusted and is literally falling apart, sharp and very rusty pieces were falling into the washer tub. No wonder I find holes in the clothes that werent there before washing. I removed what I could, including the part it should hold, a plastic plate that covers the light, protecting it from moisture. My husband covered it with electrical tape to prevent injury and possible electrocution. I contacted Whirlpool, but they have ignored my questions and have not answered. They do not have a replacement part for it (stated on their parts website) They give you no solutions to a problematic appliance that should have been recalled and taken off the market due to safety issues that have caused injury and possibly worse.

I purchased my Whirlpool refrigerator 8 months ago model # WRF560SEXM which is less than a year old and already Im experiencing problems already. I have owned several refrigerators in the past which were older models and less sophisticated, and all of them lasted well over 10 years with no major issues, so to buy a new refrigerator through Whirlpool and have it malfunction in less than a year is unacceptable. Customers deserves better than this especially at these prices.My malfunction occurred when my ice maker stopped working and the internal temperature stopped working altogether, which caused all my food to spoil which had to replaced which was very expensive which infuriated me more and because my service appointment was a week away. I LITERALLY had to order out for food and purchase ice. And if this happens again I will have replace food and order food out again. WHIRLPOOL dont realize the impact this has on its customers. I would definitely not recommend their refrigerators EVER!!!

The freezer has never been able to produce ice cubes, so, took the ice cube maker out, and bought plastic ice cube trays. Not what I paid for, but it’s cheaper than having to buy another fridge.

I bought this washer less than 2 months ago and I am devastated to say the least as they are not even remotely cheap. Appears that is doesnt come close to using enough water or enough agitation to get even 2 pieces of clothing clean. What good is 5.8cu (largest size tub) if you cant even wash a load sized for non HE washer. I am forced to wash a 1/4 of the amount of clothing now vs my previous standard washer, if I even want half cleaned clothing. I have tried every cycle with no difference.Doesnt use enough water but appears to spend most of the cycle time, filling with water. I know that sounds contradictory, but there isnt really any other way to explain it. Might as well not even have an (agitator), I use that word lightly here, as it does nothing to help clean the clothing inside. Pre-programmed cycles are not enough to do what you need it to do. Because of the pre-programmed cycles, unable to place clothing inside, fill with water, agitate a little and then stop or pause long enough to let contents soak for a while. I really miss being able to do this with my previous Whirlpool washer.It doesnt matter how little or how much detergent you use, the results are always the same, clothing comes out partially dry and dirty. Usually requires 2 or more wash cycles to remotely obtain clean items. Most items never even go under the water, no matter how much water it decides to fill with. I am so disappointed with Whirlpool with this fiasco they call a washer, with their name on it and they should be also. I have never owned any other brand than Whirlpool, so I didnt hesitate to buy this set, as I had wanted them for several years and finally made the decision to purchase and what a mistake this was. Will never make this mistake again. Whirlpool needs to correct this for every customer that has purchased these washers or risk ruining their reputation.

We bought a Whirlpool freezer-bottom 18.5 cu ft. fridge from Lowes. The compressor broke in less than three months of regular use. I called Whirlpool who sent A&E to check it out. The technician didnt even file a report and lied to me about what was wrong with the fridge. They sent a different company to come look at it and they confirmed that the compressor is broken. I called Whirlpool customer service and was told that the warranty only covers repairs not replacement even though I paid over $1,000 for a defective product. The excuse: Its a man-made product so we cant guarantee it! So what used to be a 3-5 year warranty not too long ago is now what? A one-year warranty is virtually useless. I can see a future not too far off where there is no warranty at all. Where is the protection for the buyer? If I wanted to purchase a second-hand fridge, I would have. I will never buy Whirlpool again.

I have had this machine (Indesit IWDE126 Washer/Dryer) for a very short time; the washer is great. It does a 20 minute daily wash which is good however the dryer part screws up everything you put into it and ironing, even with steam, makes no difference at all. The WORST part is the organisation DONT CARE. I wrote to the Chief Executive, Jeff Fettig, who neither acknowledged my complaint or responded to it. I made this complaint in October 2016 and STILL do not know what the outcome is. If you are reading this review I honestly would look elsewhere for a better machine. Try MIELE. They are expensive but 2000% better.

We bought a Cabrio washer & dryer September 2010 for a room addition that wasnt completed yet. We didnt get moved in until the first of November. So the washer wasnt used until then. In January 2011 (15 months later) it stopped spinning so clothes were dripping wet. We called Whirlpool and were told that they would be happy to set us up for a service agreement for $322 for one year. We declined since we bought the washer for a little over $500. When we had a local Whirlpool service man come out and he determined that it was the control board which would cost $265 (Whirlpool only warrants parts 90 days). I sent an email to Whirlpool and was told too bad, so sad. We called their customer care line (that is really not the term for that phone center) and asked to talk to a supervisor, who essentially told me the same thing. Whirlpool is making equipment that is extremely poor quality. There is no incentive for them to produce a better quality product as they make money on the extended warranties that are necessary, or if you dont buy an extended warranty they charge an extraordinary huge price for their parts, which they dont warranty. We will never purchase anything made by Whirlpool. I am not sure where this useless piece of junk that I have will end up but I intend to let everyone I know what a terrible company Whirlpool is to deal with.

I bought the Cabrio Platinum Set approximately 3 yrs ago. These is the worst products I have bought ever. The dryer didnt dry properly since day 1 w/the energy saver setting. I have always had to run a time dry in order to get properly dried clothing. Sometimes things still come out damp. The washer well the washer as I said the WORST product EVER. Approximately 3 yrs old and it leaks all over my laundry room unless surrounded by towels to suck up the water. During the wash it has the worst smell ever. And while spinning it jumps around and is so loud, you can hear it all through my 3 story home. We have complained we have written, emailed, called and have been offered nothing. I can honestly say I will NEVER buy another Whirlpool product again ever.The least they could do is stand by their product. For the price of this set it should have lasted much much longer. I had a Kenmore washer and dryer set that we bought it was not even top of the line I would say probably a cheaper model of theirs that lasted 10+ yrs we bought it brand new and my friend bought it when I changed to a front loader which by the way was one of the cheaper ones but was still better than this piece of **. It started breaking about 1 yr after we bought it. We have already fixed a few things but will not spend another dime on it. Now its not even cleaning. I now have to buy yet another washer. From what I have read either Whirlpool needs to up their game or just go out of business.

Purchased this refrigerator in 7/2017. I cant stand it. Its pretty and works, but the NOISE!! I bought a white noise machine and placed it on the countertop next to the refrigerator just to drown out the noise (very high pitched sound). Repairmen came out twice. A part was replaced, but nothing changed. Said have to live with it. Dont buy Whirlpool or youll go crazy listening to this all day, especially with an open concept home. You can hear it everywhere!

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

Wish I had done more homework before I purchased a Cabrio washer and dryer. The washer uses so little water that I sometimes find dry spots on clothing when I take it out. How can it possibly be clean if it doesnt even get entirely wet? I now pre-rinse all of my underwear before putting it in the machine. I know the instructions say not to put in wet clothing, but if it breaks sooner, Ill get to replace it sooner with a more traditional model. I always use the lowest spin speed - anything else makes my clothes hopelessly wrinkled. I like the large tub for washing blankets and comforters. Thats about the only advantage I can think of. The dryer sensor quite often goes off after about 2 minutes if I use any setting other than the delicate or timed features. Ive had the machines for 2 years and had the dryer repaired once under the extended warranty I purchased. Very disappointing purchase.

I have had my Whirlpool dishwasher for 8 years..I cant use the top rack anymore as it doesnt clean dishes!! I bought a brand new one for my cabin..I hope it works longer (right now it cleans amazing).

On December 21, it became clear that I needed to replace our 13-year old Rheem water heater. We decided to buy one from Lowes, 36 miles away and have a handy man install it. He installed the new Whirlpool 50 gal gas water heater with a 12-year warranty on Friday, the 22nd, but could not get it to stay lit. He called Whirlpool to troubleshoot. They said it could be one of two parts and that they would ship the parts on the Monday after Christmas. He asked who would install and they recommended a local plumber. He called that plumber but they indicated they did not do Whirlpool warranty work and would have to charge.On Monday, I called Whirlpool and was assured the parts would be shipped that day for overnight delivery. I confronted them about the local plumber not doing their warranty work so they set up an appointment with a company called A&E for Wednesday morning. On Tuesday morning, I called Whirlpool to get the tracking number on the parts and was told that they did not get shipped on Monday as promised but would be shipped that day, arriving by the end of the day Wednesday, too late for the appointment for installation.By Tuesday night, my wife got on this site and was appalled to read the numerous identical complaints. I decided that Wednesday morning that I would hire a plumber to remove the Whirlpool and install another so we would not have a lifetime of problems from Whirlpool. The plumber installed a different water heater. It started right up and we have had no problems since. I got an R or RA number from Whirlpool which I think they only gave me because the parts had not arrived on time and I returned the piece of ** to Lowes for a refund. Lowes has a seven-day return policy of these.

We bought the Whirlpool Duet set for $1,000 18 months ago. About four months ago, it started shredding our clothes. I would get them out with holes in them, but there was nothing sharp in the washer. Then the grey outside seal started deteriorating and getting tiny balls of rubber all over my clothes, ruining several white shirts. It always smells like mold. I just went to get my clothes out of it to find out it leaked water all over with that disintegrated rubber from the seal. The seal had completely ripped from the top to the bottom drain for no apparent reason. Now we are replacing the below. We JUST paid it off this month. It is crazy, it is already breaking!

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

I bought model #W4TXNWFWQ at Lowes in February 2013. It had a one-year warranty. Five months after the warranty expired, the defrost timer went out. It cost $100 to fix the $400 refrigerator. Planned obsolescence or coincidence? Either way, its poor quality.

My Whirlpool dishwasher is not old. It has hardly been used, and the board is bad. My washing machine, a duet, is not old, and the knob to turn it on broke. I am returning the knob to Whirlpool. Perhaps they can duct tape it and make it work on another machine and make big dollars on someone else that buys their junk. This is the LAST piece of junk that I will ever buy with a Whirpool name on it.

Whirlpool Gold Series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two upfront is way too hot for regular cooking, even on lowest setting. Was going to use spray cleaner but cannot on convection ovens. In a bind what to do except scrub with Brillo. Anyone used Brillo?

My new washer quit working properly. It does not spin or wash properly.

I bought a new computerized Whirlpool Cabrio top-loading washer and matching dryer 3 years ago. Bearings wore out under warranty, it was repaired. Just outside warranty, washer has broken down twice more. I contacted Whirlpool and received a high level of indifference to my concerns that they manufacture junk, and are not willing to stand behind it. Clearly, this is a faulty issue with the machine and should be repaired then and now at their cost. Do not buy Whirlpool products people.

This is the second time since I have had the fridge in September 2011. I had to have a new compressor installed about two months ago, and now, it is doing the same thing again. I had lost all my food before and its happening again. Last time, it took over three weeks before the fridge got fixed.

What is the brilliant idea of a mode dial on a washing machine that needs to be pushed in or pulled out to engage its function??? In other words, why is there a free-spin mode of THE DIAL itself? Okay. IN OTHER WORDS, why not just let the handle part of the dial stay affixed to the red line mark, so that they continuously turn together at ALL times???

Purchase a brand new Whirlpool fridge at the Fry’s Electronic in 2017. Broke down in 2018 almost 1 year after. Called Whirlpool company for replacing a new one. They didn’t replace before they had sent out a certified technician for fixing 3 times. It took forever to fix it, and still had the same problem after months. Finally, they agreed to replace a new one. Now I still have the same problem with a newer one which they replaced it over a year ago (including fixing and placing time). Just called to the Whirlpool company today for fixing or replacing, spoke to rep Sara, she said that it’s no longer under warranty because it’s more than 1 year. I told her that because the company didn’t replace right away; therefore, it has been more than 1 year; but from the time they replaced it, it hasn’t been 1 year. Ill never buy any Whirlpool products again.

The only reason I am giving it one star is because it looks good in my kitchen. This dishwasher does not clean the dishes. I’ve had it serviced twice, both having to wait for parts, I am very disappointed. Having to run the dishwasher two times to find myself hand washing... Is annoying. Dissatisfied. I don’t put certain dishes in and run very scant loads. Family of six is not happy!

Why does your AquaLift self-clean feature not work? Tried numerous times & have been scrubbing all afternoon... Horrible!!! My last oven (Maytag) self-cleaning feature worked awesome, just had to vacuum out ashes & wipe down with regular soap & water. Have no idea what to do to get this oven cleaned!!! Very frustrated...

I love Whirpool products. They work well, even under hard water conditions. Ive had my Whirlpool washer/dryer for 12 years now without one single problem. Even with the hard water problem in my house, the clothes still come out clean, the dryer works well, I do clean my vent each and every time after each dry. I also have to clean the area where I put my detergent in due to the hard water and the machines are still working great.

I have a Cabrio washer displaying the F-1 error code. I called on Thursday, the 15th of Sept. I spoke to Vicky in the Cleveland, TN division. She told me that the F-1 code on my machine (model no. WTW6600SW2 and serial no. **) was covered under a recall at no cost, parts or labor (I specifically asked this question). She set up a service repair ticket with Freds Appliance at 888-453-7337 and gave me the date. I was home waiting when they called. The driver drove in the drive and asked if he was there for my Jenn-Air cook top! I said no, the F-1 error code on the washer. He explained that he had just used the last control board last week and he changes them frequently. I called Whirlpool. A very snotty Ashley proceeded to tell me that nothing was covered and I would have to pay. I asked for a supervisor and Ratna answered after a hold of 45 minutes on my cell. I explained the situation. After begging, she proceeded to tell me that she would pay for parts only. I explained that the tech did not have the parts, didnt even know the correct appliance, and now I have to take another day off work to meet him to have my washer fixed. I have not used the washer in two weeks. I used to only buy Whirlpool products. After reading all the complaints about the same error code from other consumers, I believe there are enough complaints that we as consumers should be protected.

I have hated this Cabrio washer and dryer set since the day they were delivered brand new by Best Buy a couple of years ago. The washer does not clean well, often does not spin dry, and leaves some clothes dry after a full wash cycle!!! I have to wash small loads on the deep water cycle to even have a chance at cleaning the clothes. The clothes are so dreadfully compacted and tangled that it takes great effort to birth them out of the washer, unfurl them, shake them, and put them into the next torture machine- the dryer. It is as if Whirlpool intended to build a machine to twist clothing so tight that it requires a bodybuilder to untangle the clothing. Then the items are so incredibly crumpled that ironing has found its way back into my already busy life. Ironing is a massive challenge to the degree of wrinkles in the clothing. The slanted tops are icing on the cake. Cant even pull the clothes out of the dryer to the top of it because they slide right off. Cool.

I purchased a Whirlpool 3-door refrigerator with the freezer on the bottom on 8/17/12. Within 4 days, the ice maker stopped working. It took two days for the repairman to come out and fix it. So all is well with that. Less than 2 weeks later, the refrigerator isnt cooling. Several days later, the repairman came and determined it was the evaporator fan motor and clutch. The parts were back-ordered for 10 days. Parts came in 2 more days before he can come out and install them. He realized they sent the wrong parts. Another week went by, then he came and replaced the fan motor, which is now making an ear-piercing buzzing sound. He came back a week later and said it needed a gasket, which is back-ordered. In the meantime, he put some stick on insulation around the unit. Not much help. Another week went by, and the gasket showed up. It is still making a high-pitched whining sound. He said it was the compressor. Whatever! I hate the refrigerator. The sound is one that just grates on your nerves and you can hear it in all the rooms surrounding the kitchen! A repairman has to deem it unrepairable before they will even consider replacing it. They consider it fixed. What about my bleeding ears! I just want it gone! I am so disappointed. I thought Whirlpool was a good product with a solid reputation. I have a $2300 noise maker! Is there a class action lawsuit?!

I bought a brand new washer from Home Depot, Whirlpool 4.3 cu High Efficiency Top Load Washer to be exact. It hasnt even been 90 days and it started to make the loud, horrible noise so we had someone come and look at it. Apparently the transmission blew and the oil leaked all over my tile floor. I work full time and I do laundry only on the weekends and there is only two people living in the house so you can imagine we do not use it that much. I went to Home Depot first and since it was past 30 days we had to called Whirlpool direct. The customer service is horrible. I thought since the transmission blew, they would replace the entire machine since that is the brain of it. NOPE! They said to replace the entire machine and give us a new one, it would have to break 3 times. Are you kidding me? They did not offer to reimburse the tile damage or the amount of money I had to spend at the laundromat. Not to mention its been over a week and the guy still has not come out and fixed the transmission. It would not be a big deal to me if the hose broke or something simple, but imagine if you bought a BRAND NEW car and the transmission broke 60 days after you bought it. You would take it back to get a new car. The customer service line could not care less about the issue. I spent over 2 grand in appliances from Whirlpool and I will never buy their product again because of the customer service and the fact they did not want to make the situation right. I just bought the machine brand new for a reason!

My son bought a Mastermind 250-L refrigerator on 09.09.2009 (invoice no. **) from the Good Morning store in Alleppey (phone no. 0477-23253809). The cooling effect was lost with a loud sound. I requested customer care. Three times, four people came and they gave a receipt of RS 890. After they left, it is in the same condition. I requested so many times, but there’s no reaction. Before I could go for legal proceedings, I would like to make you aware of the conditions prevailing in Kerala in sales and services. The young trainees who dont know to repair have broken down the entire system and it is fully collapsed. The franchise office washed their hands. This will spoil the entire name and fame of the company. Kindly look in to the matter and do the needful immediately.

I bought a whirlpool washer from Whirlpool on February 27, 2011. Since then, they have come out and repaired the washer for 5 times. They have even taken the whole motor out, and replaced it. The last time they came, they said I would have to pay for the next time. Now, it has broken again, and I have to pay for a washer repair that is less than a year old. We bought the Whirlpool washer at Sears, and neither Sears, nor Whirlpool will stick by their product. We cannot afford another new washer, and to pay for repairs is a stretch too. Is there anything you can do?

We originally became alarmed by an awful smell and noticed that our Whirlpool Conquest side-by-side refrigerator freezer/fridge was not keeping food items cold. Upon further inspection, we saw that the compressor starter in had started fire and melted. Our refrigerator model #GS6SHAXLS42 and serial #SM3832794.

My Whirlpool washer would start up but would not add any water. It sat there doing absolutely nothing. Then it showed a code on the screen. It said to disconnect the power for 1 minute and plug it back in, which I did. I repeated that process several times. Still nothing. It also said to call Whirlpool, which I did. They wanted the Model # WFW97HEXLO and Serial #, I gave it to the gal on the phone at Whirlpool. I was told it would be a week before they could get someone out there to take a look at it. Really!! I work 80 hours a week and live in the country. I dont have a week. When I asked where the service man was coming from, he was coming from another town. I asked if there was someone closer. She gave me another appliance stores phone number. They showed up 2 business days later, looked at my washer, verified the code along with the Model and Serial #s, telling me it was the control panel. I gave that information to them on a Friday, they showed up on a Tuesday. They knew what that code was and what it meant for that make and model washer, but there just had to be a service call in there. The part was ordered on that Tuesday... here it is the following Saturday and the part still isnt here. I do not understand what takes Whirlpool so long to ship the part. Do they not care that in this hustle bustle life we live in, we dont have time to wait for a part that may or may not show up. Ship it overnight. That is an option. Making the parts accessible to the service people in a timely manner would make great customer-service. Better yet, how about going back to the old-style washers. This high-efficiency non-sense is highly expensive.

Off balance, wont wash correctly. Familiar stories online. Wasted money on a washer that is not very old. Wont buy another one ever again.

My Whirlpool refrigerator is more than a year old but have been complaining forever it seems. The serial # is 21142009, model WRT777REYWOO. All bottom cords etc. is out and 3 times I had people come out to fix and it never changed. The lettuce drawers freeze and in the freezer leaves ice cream pretty soft. I am so upset about this, and cannot afford a different one, no matter what brand because I paid around $1,000 for it and I am low income (my ss), 73, and disabled. But Whirlpool refrigerators are not worth buying if this is the standard policy to ignore their responsibility here. It leaks water from freezer to meat compartment, and I could go on but seems hopeless. My sister in Oregon had the same one and they took hers out finally so she could apply that amount to a different brand which has no problems.

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

My brother bought my 80-year-old mom this range so that she could bake all her delicious desserts with ease in a new beautiful oven. I was at her house visiting and saw that she was down on her hands and knees cleaning her SELF-CLEANING OVEN. She tried several times using the useless AQUALIFT FEATURE but to no avail. In this day and age with self-cleaning technology, WHY would Whirlpool install this unbelievable bad AQUALIFT cleaning feature? To see my poor mother scrubbing the inside of the oven like she did back in the 50s & 60s just completely appalling!! PLUS the top surface enamel is bubbling up with rust and the oven is only 2-3 years old. So we are trying to contact Best Buy to see if we can get a refund on this HORRIBLE appliance.

After much frustration and disappointment, as well as 2 huge repair bills with my front loading washing machine I sent it off to the scrap yard, still looking brand new, and went back to a top loading machine. I purchased a Whirlpool top loading, high efficiency, low water machine. I have had it for almost 2 years now and am extremely happy with it. I would highly recommend it. Fairly quiet and easy to use and takes very little detergent. It does not have an agitator so it is gentle on clothes. I know some users have complained about tangled clothes but, in my opinion, if it is loaded correctly this should not be a problem.

Last week dishwasher leaked. Set up repair with our local gas company that has service plus. Came today. Repairman showed me there is a hole in the bottom of the tub. Upon closer inspection it looks like the manufacturer drilled a hole that wasnt needed so they routed out a depression in the tub and must have put in some sort of plug or filler of some kind which now came out. I called Whirlpool and explained to lady about the defective tub. She said well if it had a plug of some sort put into the tub it would have fallen out before this. I said Well it didnt it just must have happened as it never leaked before. She said it is no longer in warranty. I told her this is a defect to me as if you drill a hole in the tub that wasnt necessary and then the plug failed that you put in to hide the extra hole. It is a defect not a warranty issue. Upshot is she wouldnt do anything about it. I told her I have always bought Whirlpool but if this is their policy its the last time I buy anything made by Whirlpool. After reading all the complaints registered here about Whirlpool I guess I am more than fortunate as my dishwasher (bought in 2006) had run great until their plug fell out (Great except for all the rinse aid that has leaked out for several years.).

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

Our new Whirlpool Side-by-Side Refrigerator is very versatile as it serves the needs of a busy, family kitchen. It is heavily used storing cold foodstuffs to feed our family of four, plus two active grandsons. Being able to re-configure the shelving space enables us to adjust the main compartment accommodating items of different sizes (think a thawing turkey or a 24-can case of soft drinks!) to ensure our most functional usage. The same can be said of its freezer space - it too features built-in slots to reposition shelving for varied size packages and boxes. Convenient in-door water and ice dispensers round out the beneficial features of this attractive appliance.

3 months after I got the fridge, the ice maker went out. 3 months later it started to work again. Replace the water filters 2 times per yr. It is noisy when it makes ice.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

I bought a Cabrio 2 yrs. ago and I wish I had my old washer back. I read reviews and checked out a lot of literature and thought I was getting a quality machine. What a waste of hard earned money. I cant get clothes clean, its loud, and it leaves soap residue even after an extra rinse. Whirlpool products arent what they claim to be. I had a freezer I bought because I bought a half a steer and it quit running and I lost all my beef - $700.00 worth. From now on I will stay away from any Whirlpool products!!

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

The repairman said the shaft, which of course is one piece with the outer drum, is corroded. Really? Did we not expect water in our washing machine? The repair is $500. After reading all the bazillion complaints on this model (on the internet), I have decided not to repair the piece of junk!

Whirlpool gold model GI6FDRXXQ06 - This fridge is 3 years old and we are about to put the fifth ice maker in it. Vegetables freeze in the vegetable drawer (yes, its set correctly). Our repairman even says the design is faulty but since the warranty is out, we have to keep replacing the units!

I called the dealers repair department, which said they had not seen this before and it looks defective. I have used the oven less than a dozen times. It is virtually new. They submitted pictures to Whirlpool. The oven surround is not replaceable, so the request is to get a new oven. Whirlpool responded with, This is normal... when the cracks break through, then there is a problem. What?! I have been cooking for over 50 years and have never had this experience before. This product is under warranty. By the time it cracks through, it will be too late to do anything about it. Since when is crazing on the oven bottom natural, especially after only a very few times used? This is defective and Whirlpool is shirking their warranty. I am very dissatisfied.

Cleans dishes very well, a bit noisy maybe that just the model I have. Exterior is very nice, interior there is plenty of space for the dishes and pans. There are no streaks on the glasses. No soap scum left on the dishes at all, very good unit.

Our washing machine - as part of a stackable set - is two weeks beyond the one year warranty. Washer breaks down, I order the replacement part to find out - after waiting two months for the part - that the washer is now being discontinued so the ETA on the part is NEVER. Ask what Whirlpool will do about this and am advised that they will offer me a discount on a washing machine that does not fit on the stackable dryer. Or I can purchase a new washing machine at more than the original cost of the stackable set.This is a totally unacceptable situation. The washer is just out of the one year warranty period and it is already being discontinued??? Is Whirlpool making disposable appliances now so that after the one year warranty we just toss the appliance in landfill? Really? Unable even to purchase replacement parts to repair a one year old appliance? I will think long and hard about ever purchasing another Whirlpool appliance again.

We hate the matching Cabrio washer dryer bought in 2011: Dryer lower blower went out after 18 months in service. The day it went out whirlpool sent me the extended warranty offer. Warranty had expired 6 months prior. I renewed for 12 months and promptly called for a repair. Cost was approximately $450.00, all covered under the newly paid for warranty. I dodged a bullet there. Washer has the splintering fiberglass around the top. Lower bearing is out and sounds like a freight train coming out of the laundry room. Not going to have it repaired. Looking for new units not manufactured by whirlpool. Shameful ROI. No more whirlpool products in our house.

Had the washer 3 years. After 1st year had to replace motherboard and lid locking mechanism. Beginning of year 3 the basket came loose, the machine wouldnt spin the water out of the clothes completely and then it quit cycling into the next cycle, ie, the tub filled up with water for the wash cycle but then would not begin agitating. The water sat in the tub until the wash cycle was done and then would drain but would not spin. Each cycle had to be manually started by pressing the pause button, raising the washer lid, and then pressing the pause button again. I called a repair person who ran a diagnostic on the machine and said it needed a new pump, new motherboard again and something else to make it spin properly. Sorry I dont remember what the something is. The estimate to repair was approximately $759 so I am now shopping for a new machine thats not a Whirlpool.

3/16/2019 washed a load of bed sheets, on the white clothes cycle, put the wash in at 9:21am. Left the house at 12:41pm. Wash still not finished! It was finished by the time I arrived back home, I was gone about 11/2 hrs. I have yet to complete a wash cycle in less than 1hr 15mins. I hate that I have no control over water level, that I have to put detergent in the bottom of the tub, and the damn lid locks! My clothes dont feel clean. Why does big brother get to decide how my wash should be done, when they dont pay my water or electric bills?

I bought a Whirlpool Dryer after reading an excellent review in Consumer Reports, despite it costing more than I wanted to spend. The first thing I noticed was a thump, thump, thump with every rotation of the drum. Then I realized that it took twice as long to dry my laundry as my 45 yr. old GE dryer, which only needed a belt, but which wasnt available anymore. I was disappointed in the Whirlpools performance, but that was only the beginning. One night when the dryer was less than 3 months old, I was in bed for the night and I heard the familiar thump of the dryer running. I went downstairs and could not stop it as it did not respond to anything on the digital control panel. I finally unplugged it. I called Whirlpool and they sent a new control panel, but I had to pay the service man.Not too long after that, the dryer heated up, but the drum would not turn. The serviceman said that it had come off track and he reset it. Shortly after, the door would not stay closed as the clamp that held it shut had fallen inside when I pushed the door closed. I replaced that. Then the drum continued to come disengaged because it was out-of-round. But, of course, the dryer was out of the 90 day warranty period too and a drum replacement would have cost more than the piece of junk was worth. So, I had it put back on for what I told myself would be the last time. Well, it was the last because the control panel went bonkers again and would go on by itself and only ran on one cycle if I plugged it in and unplugged it when it was done. I finally gave up and bought an inexpensive analog GE dryer which I never had any trouble with and dried the clothes in less time with less noise.

I bought this fridge in July of 2017. In December the Ice Maker quit, I called and they sent a tech out. The repair guy reset the ice maker and it made Ice. It functioned June and quit. They sent a new company that was a no-show, so I had to wait until July for the new company to come out. When they did, they replaced the ice maker. It worked for 10 days and quit. Same thing, replace the ice maker and this time quit about 30 days later. I called August 27th because the 4th Ice maker quit again. I was told by a supervisor that because they have used the same claim number it counts as one claim and does not fall under the Lemon Law. I did get the supervisor to admit that there are 2 claims in the system while under Warranty, but now it is on the extended warranty. Whirlpool is Garbage and I am here to tell everyone to STAY AWAY!

I bought a heater from Lowes in south lebanon ohio in feb. 2013. Gas valve is bad. Whirlpool will not replace it because it was put in a utility room with a toilet in. What a bunch of crap. Their service dept. is joke.

I just finished reading multiple complaints that sound very similar to my experience in 2014. I bought a fridge for a rental unit in Oct. 2013. The freezer malfunctioned and froze up in back, 6/2014. Had multiple repairs with the problem going unfixed. After a couple of months with my renter without a fridge and laborious system requiring multiple phone calls on my part to get an exchange approved. The exchange went thru. It was delivered the am of Sept 11. Guess what? It was dented on the side. The delivery personnel thought is was prior reject and it was an attempt to get me to accept it as is with a small cost reduction off the original purchase price. NO thank you! So still no fridge from Whirlpool as of 9/13/14 that is functioning from Whirlpool and yet to have a call back from Whirlpool regarding the mishap. No apology, no remorse, just the way they do business. I will say that my local HOME DEPOT was willing to send me a loaner fridge for my renter for his garage. NOT ideal but better than nothing and quite nice of them and an example of what customer service should be! Thank You HOME DEPOT! SHAME ON WHIRLPOOL! Not sure how this will end but obviously is common them after reading the reviews. I am now concerned if they do replace it again with an undamaged fridge it will repeat the same dysfunction pattern and I will have to go this painful process all over again! EEEEK. Refrig WRT771REYBOO, VS33469859 BTW I had to pay for spoilage of food for my rent on multiple occasions because the repairs work for a week or so and my renter would stock up the fridge and it would go out and he would lose food. Whirlpool gave me a 50 food spoilage card after much complaining bc go figure the warranty does not cover food spoilage but apparently the extended does. Go figure?

Another reviewer complained about a knocking sound upon startup. My Brand New fridge has been doing that and I have just ignored it. Maybe I shouldnt. Compared to our original Beaumark fridge, the Whirlpool is VERY NOISY.. Since the actual workings seem fine, I am not complaining but rather quite concerned.Especially after reading the numerous Negative Reviews.

I have the same issue with cooking time on my Whirlpool wall oven (WFE54OHOES). Bought it in January and have not yet had a single recipe come out cooked. Outside is crisp, inside uncooked, after twice the amount of time it used to take. Its still under warranty. Service came out and told me to bake differently. Thats an answer for you. I am going to pursue this issue with Best Buy where we purchased it.

I had my range installed in January of 2015. The very first week, using a new Farberware non-stick skillet, the cooking surface became permanently scratched. Could not polish it out, and polishing - it must be done every time you cook on it! In early September the cooling fan for the electrical panel went out. Also, the convection oven would not maintain heat. Had the cooling fan replaced last week. Its out again, along with the convection oven not maintaining a regulated temperature. Also, 3 months ago, my grandson put a ceramic casserole on the stove top. After he took it out of the oven, it permanently scratched the paint off the control panel. Im very disappointed in the fragility (painted plastic surrounds top of control panel) and unreliability of this product, a total lemon.

DONT BUY WHIRLPOOL! I bought a Whirlpool refrigerator 5 years ago. In June I had to have a new thermostat put in because the refrigerator would not stay cold. The food in the freezer would defrost and then freeze, defrost and then freeze. I had to throw all of the food out. Two weeks ago the refrigerator was making a groaning noise so I looked in the freezer and the temperature was up to 30 degrees. The ice cream was soft, the bread and buns that I had in the freezer were defrosting and small things like crab cakes had also started to defrost. Eventually the temperature went back down to zero.So I called out the repairman AGAIN! He told me this is normal that the freezer goes up to 30 degrees to defrost the freezer and the groaning noise I heard had to do with the Freon. It cannot be normal for food to freeze, defrost and freeze again. I called their customer service and their representative, Jasmine, basically told me all she could do for me was to schedule a service call. Really? I just had the repairman out the day before. I am concerned about food safety with a refrigerator that fails to keep food at the proper temperature.

Microwave Hood Combination...moisture sensor failed...potato caught on fire. Service company Whirlpool sent failed to show (Whirlpool selected a repair shop over 100 miles away). 2nd service company told me sensor failed and they would return with new part (ignoring the fact the white microwave was not gray and black) in a few days. If I wanted a new microwave without the dust and ash, I had to call Whirlpool. Whirlpool is ALWAYS experiencing a high volume of calls.Whirlpool states 7 - 14 days (unit on back order of course) for the microwave will arrive. 21 days later..no microwave. More high volume of calls... Whirpool state a repair center has received the microwave on July 31st and should have called me. Said repair center has no record of this transaction. Whirlpool reps claim to have records of my claim...but... they keep asking did we tell you it had been handled? I say read my file... Customer rep says my file is hard to understand (i.e. it is long). But they assure me they are empowered to help me. Maybe they should look up that word.Today...it is not Whirlpool customer service fault! No... It is being handled by a Product Replacement Specialist... Sadly they cannot provide me with any contact info for that Specialist. Empowered but not informed! Lesson: Whirlpool dont buy or if you do... and it catches on fire...just buy a new one... They make it impossible to get a replacement.

I bought a Cabrio from Costo less than 2 years ago. Dryer so far so good (big barrel with hair dryer so what could go wrong?). Washing machine is HORRIBLE. Lid latch broke (couple hundred to repair). Now out of the blue I get an F2 error & machine is completely inoperable. I am only user & very careful with it. There should be a recall on this expensive junk. NEVER buy Cabrio or maybe any Whirlpool appliances again. Ive never written a bad review btw.

The buttons that turns on the burners and oven turn on with a very light touch and start leaking gas and sometimes light. Its very dangerous and has done this since We got it new from Lowes. I wonder if there was a recall on this model or if lots of other customers have had the same trouble. Model #WFG524SLAS O Ser. # R20910336 We have had this stove about two years and My wife has kept after Me to report it , but I never realized how dangerous it really was until now. The previous stove We had you had to push in on the buttons and then turn them before they would light. Thank You.

Purchased the Sears Oasis (made by Whirlpool) washer and dryer almost 4 years ago and I have worked on these machines more than the Maytag machine and dryer I used for over 22 years. Electronic and mechanical problems. One recurring problem is loose change working its way into the drain pump on the washer and it knocks a hole in the side of the housing. You later discover it when you go down to the basement and find about 50 gallons on water on the floor. Very poor design! Never happened the first time with the Maytag.

2007 we purchase a Whirlpool Casio washing machine. Rusted out in three years. 2008 we purchase Whirlpool gold dishwasher. In two years the front panel rusted out. We replaced this panel and now the second one has rusted out. According to Whirlpool they do not cover rust. When we replace the washer it was with a Samsung. NO SIGNS OR RUST IN THE LAST THREE YEARS. When we replace the dishwasher it will not be a Whirlpool. As far as I am concerned, Whirlpool products are junk.

Washer has rusted out after only four years. I bought my set from Sears, and thought I would get good use out of it for many years; but I am experiencing rust falling from around the rim of the washer. Very dissatisfied with the product, I will never buy another appliance from Sears again. I have always used Sears appliances but after this experience I would not recommend Sears to anyone. I was told that the warranty was for one year, and the rust would not have been covered anyway. Very Dissatisfied Consumer. I thought Sears would stand behind their products. Yea, right.

Broke within a year, company wouldnt back its product. Went out for another range, chose a different brand. Make sure you know the companys policy in case of breakdown. Sometimes, even though it might be an off brand, might turn out to be the option. Think outside your norm, listen to employee, other consumers. Just because its on sale doesnt mean it actually does its job.

Worst customer service I have ever seen. I have been waiting on a part for my dishwasher since before Thanksgiving. I have sat on hold for 2 or more hours. They cannot connect you to a supervisor, you just continue to wait on hold. They cannot give an eta for the part that has supposedly been in production since before Thanksgiving. I get told one thing, then when I call back for an update 2 weeks later that person has no idea what Im talking about. I will tell you one thing, if you do not want a headache, I suggest you buy another product!! I can guarantee, I will let everyone I know and never purchase Whirlpool again if this is not resolved this week! After doing my research, this part should be recalled. It is a big issue with this very expensive dishwasher.

Whirlpool Cabrio WTW5600XW - Bought the washer/dryer set on May 13, 2011. The dryer has not given me any trouble. The washer on the other hand has been awful! From the very beginning, I noticed the washer was not getting my familys clothes clean! If one of my children had gotten anything at all on their clothes, I would have to wash about 5 items of clothing to even have a chance to get it clean! Doing this did not always work! I usually send my really dirty clothes to my mother for her to wash in her old style washing machine with an actual agitator! They always came out clean when she washed them! Also, please do not attempt to wash comforters, sheets or any bedding in this washing machine. It does not clean them! When you take them out, they smell worse than when you washed them and have wet and dry spots all over! Oh, and they are still dirty! It is now May 8, 2013 and my washing machine does not wash or agitate anymore! I called Whirlpool and they can only offer 2 options. A repairman for Whirlpool in my area will come out for $129 to diagnose what is wrong. This price does not include parts or labor! My other option is a flat $300 where this will pay for everything along with a 1 year extended warranty. So with the $300 option, this will put me paying about $1,000 for my washing machine! This is ridiculous. My washing machine is only 2 years old. I should not have to be repairing already! Do not buy this washing machine. If you do, definitely purchase the extended warranty and be ready to use it!

My Whirlpool microwave has been serving me for over 20 years. Never a problem. It performs well at all settings. Size is convenient for mounting over range. I recommend highly because of reliability and performance.

Our new Maytag (i.e. owned by Whirlpool) oven/range is a stainless steel pile of junk. It takes FOREVER to pre-heat. The range elements take FOREVER to heat up. And like others on here, the Aqua Lift cleaning simply does not work. We put the oven through 3 back-to-back cycles and only the bottom gets a little clean. What a scam.

The wash machine is JUNK. We paid $2500.00 for our washer & dryer at lowes in 2012. I HATE IT from the start. It has destroyed most of my clothes. I hate doing my clothes. The water does not get my clothes wet, they dont get them clean AND the washer dont even get them wet. THEY need to do a recall or get us a lawyer. ALL the money I have put in this washer. The price we paid for them is a SHAME. IT is WRONG they are telling people that this washer is the best. They lie. I HATE HATE THEM.

The one star is just for the oven, which is still working. I have a microwave and oven combo and the microwave is used occasionally for popcorn or to reheat the food. Soon, it stopped warming up. I called the service, which is one of the worse experiences I ever had, and was fixed.Soon after, the same part got broken. But I ran out of the warranty. I bought the extended warranty and all the problems started. I was told by one of the Whirlpool representatives that before my warranty will become effective, I have to fix my microwave on my own expense. But in the Whirlpool terms and conditions, it stated clearly that they do not cover if the repairs are made by anyone other than a participating service provider or those recommended.I decided to cancel the warranty after paying the first rate but before it become effective. I fixed the microwave on my own expense with a different repair service, since the one that was recommended by Whirlpool charged almost a half of the amount as I paid for the whole unit.Within the month, the some part got broken again. I called Whirlpool to find out if this is a manufacture problem and is listed as recall. However, Whirlpool did not respond.

Model ED5PVEXWS14/Whirlpool Stainless Steel side-by-side refrigerator purchased from Lowes: My wife and I purchased this refrigerator from Lowes as a part of a kitchen renovation project. It was delivered by Lowes and worked great. The shelving cracked at the back as other owners experienced, but I blamed that on kids and was fine with ordering replacement parts online. Fast forward to the present and a year later, everything is working fine. Out of the blue it quit cooling or freezing on 6/12/13. I thought it was a capacitor problem, but since we purchased the refrigerator on 4/28/12, we decided to have a repairman come out and check. When he accessed it, he found that the compressor was bad. He stated every once in while you get a fridge with a bad compressor. He also said I just happened to have the particular refrigerator he sees frequently. I normally buy all Whirlpool products - microwaves, washer and dryer, dishwasher, my old refrigerator (still working at my relatives house), and my daughters college fridge. This is the first time I have experienced something of this nature with a Whirlpool product and hope I can work out a resolution with them or Lowes.