I bought a range on 2/11/11. On 2/14/12, I cleaned the oven for the first time at high temperature and noticed burned grease marks which appeared at the inside of the glass in front of the oven. I called for service and the repairman took apart the door and cleaned it. He said it would probably happen again. There was a leakage somewhere and he couldnt repair it. I think it is a quality control problem at the manufacturing levels.

We bought a Whirlpool dishwasher and microwave from a reputable appliance store. The dishwasher top basket broke within 30 days. The microwave lost 100% power within 30 days. Both under warranty but parts had to be ordered. Couldnt use either appliance for over a month. What is going on Whirlpool? We need a refrigerator, but I no longer trust your brand. I dont want it to quit and then lose all of our food! Please get it together and make quality products again.

I recently had the bake sensor go bad on my Control Panel of our Whirlpool Gold AccuBake Oven with microwave. Not a problem correct? WRONG! While the Whirlpool people were very professional in helping me (a shout out to them), the part I received was the wrong color. It was white; they called it a biscuit color. My oven is black. I have no idea what Whirlpool actually calls that color. Anyway, in my visit with them, I was informed the black control panel has been discontinued. Am I the only person that has a black control panel? This $280.00 part is now going to cost approximately $3,000.00 to replace the entire unit. Is there anyone that can direct me to where I can find a black replacement control panel? Way to take care of your customers Whirlpool. Solve this and I will give you a great shout out.

This microwave is one of the best Ive ever used. Ive had several brands from generic on up and this one takes the cake. Its very reliable. It works excellent and heats up fast. Ive had no problems with it working to full capacity or any fear of it breaking down. Its pricey but well worth the cost if you want worry-free warming and cooking.

I am so disappointed with this washer. I totally dread doing laundry. The following are the complaints: Every load comes out totally twisted and wrinkled!! The soap/fabric dispenser holds water after each load (I have to take paper towels and get the dispenser empty!!!). There is not enough water to properly clean the clothes. I have never noticed a reduction in my water bill and have had this piece of junk since 4-25-13. There is NO short cycle on this junk machine. There is an odor to my towels - like they are musty - after I dry them and use them. I use Tide HE detergent and clean the washer with Affresh (you shouldnt have to clean a washer). I should have taken the time to write a review much sooner, but decided today was the day after doing laundry. DO NOT BUY THIS WASHER.

Agreeing with many. How disturbing to buy a Cabrio Whirlpool washing machine about 5 years ago. I might as well go down to the river and wash my clothes. The bearings went out which means I have to be the spin cycle. I am hanging out my clothes on the line - very wet - until my husband buys the part and fixes it himself. I had my maytag for 25 years. An awesome, dependable machine that we laid to rest because of rust. We should have gotten another drum instead of buying this machine. Where are the engineers that are making dependable appliances to last a LONG time? We have not gotten smarter. Or we only care about the all mighty dollar. Make something to last a short time so that you have to buy again. We will do some extensive research the next time we buy a washing machine. Do not buy this machine!

We bought my Whirlpool top loading washer and dryer back in 2005, and they have not disappointed. Apart from needing a heating element replaced due to poor ventilation one time, both machines are extremely dependable and wash our clothes quite clean!

Just like so many on this site Bought Whirlpool Model #WRF990SLAM02 refrigerator new in 7/2013. Just went on vacation for 2 weeks, I come back and the freezer and ice maker are not working. If what everyone on here are saying is true then it looks like I too will have to purchase a new refrigerator and you can bet it wont be a Whirlpool.

Ive read a lot of reviews on here for Whirlpool Cabrio Washer and Dryer saying horrible things and maybe I lucked out? We got our set at Lowes a couple of years ago and havent had issues. We use Gain HE liquid detergent in the washer and have no problems. We also do the recommended routine cleanings of the machine as the manual says. I pick the settings for what we have, clothing wise, and it washes appropriately and things are clean, no marks or other things people have mentioned. I will click on extra rinse and adjust the soil level if something is particularly yucky. The dryer is great as well as long as you select the proper type of wash you have going on. I tend to do more dry setting and things never come out wrinkled. Sorry for all those who have had bad experiences. Also, others have complained about the noise...our old machine had an agitator and was very loud. Our machines are in a closed room and most of the time we dont hear a thing until the bell rings. Maybe wed hear more if they were in an open area or garage where noise echoes?

My washing machine stopped working. I called customer service and got through to Tonya, in the Benton Harbor, Michigan call center. She was wonderful! Living is SW Florida, were having a difficult time right now dealing with the aftermath of Irma. Tonya is an angel during this trying time! Thank you Whirlpool for have exceptional customer service reps! Ill continue to purchase your products as a result.

Purchased at Lowes and within days of installation the water would heat up so hot that it would spit and spew out of kitchen sink (10 away) and be so hot you couldnt hold your hand under it. Returned to Lowes and they reluctantly replaced it. I should have bought a different brand but I felt confident that it was just a faulty thermostat. Second one did the same. Tested different settings and it seemed to work ok but a few days later it was scalding hot again. Tech support kept telling me that water heaters are intended to be used or they are like a kettle of water sitting on a flame. I told them they were crazy to think a small pilot light could heat 40 gallons to scalding temp.Guess what? I left the heater on the pilot setting and with 40 fresh cold gallons in it. I returned 24 hours later to find it scalding hot again. I got down and looked through the view window and I couldnt believe the size of the pilot light. It is the biggest pilot light I have ever seen. It blows like a mini blow torch! And there is no adjustment. This is a serious engineering flaw and extremely dangerous. This heater is at my father-in-laws house and he probably doesnt use 5 or 10 gallons a day but still, NO WATER HEATER SHOULD EVER HEAT WATER TO A SCALDING TEMPERATURE WITH ONLY A PILOT LIGHT!!!

I will make this short. If there was a part that could break on my Whirlpool fridge, it broke. Whirlpools 3rd party repair company (Flamingo Appliance Services, who are awful themselves) was at my home countless times. This last time, they were replacing the same malfunctioning part for the THIRD TIME. The Flamingo technician (Nicholas) insured me that the issues were not related, despite the same exact part being replaced 3 times. I told him that I believed that was a dishonest statement, and he left the fridge un-repaired. Now Whirlpool nor Flamingo will help, and I am stuck with a non-functional fridge, and small children at home. Whirlpool and Flamingo represent everything I despise, have zero integrity, and are a reading on the barometer of where our country is headed.

Bought Cabrio 3 years ago, started getting ul code and f1 code. We leveled machine, but cycle kept getting stuck mid-cycle. Called repair guy, they say it is going to cost between 6 to 800.00 to fix???? Really. Its three bloody years old. Very disappointed. Do I now get it fixed or break down and buy another washer. I would not buy Whirlpool again. Very pissed.UPDATED ON 02/05/2015: We called an appliance repair company and initially paid $440.00. After installing a motherboard computer system, it still did not work. We were then told that the other part would be another $120.00. We were already soaked for $440.00 so we decided to pay. After that was repaired the washing machine was still stalling mid cycle. We were then told that it has something to do with the wiring and it would cost another $120.00-$140.00. Needless to say, we declined. Complained to whirlpool that machine was three years old. We are pissed and $570.00 out of pocket. Just bought a lg front loader and paid for a 5 year warranty!!

Bought the Cabrio washer dryer set back on 1-12-13 for my new home and thought it was a good purchase. Well now its March on 2017 and the washer has been slowly getting louder during spin cycle to the point where yup you guessed it the bearing is bad because on a cheap seal that suppose to keep water out. It just cost me just under $600 to get the repair done and from reading other reviews and the fact that I have worked on cars and machines at my employment this will happen again. I wanted to save money on water for the city that I live in charges gold prices per cubic units of water but for the price of repairs to the water saved I am in the red. So once it goes again going back to conventional unit and will never buy anything from this company again. I work in the second largest printing company in the world for 28 years on press and know a bit about quality workmanship. Its really sort of typical on how over the years some good manufacturers cut quality and design in planned obsolescence into their product just to make money for the useless corporate bloat that has taken over. I made the mistake in buying what I thought was a good product from a great company but they just proved me wrong. People do not buy any products from this manufacture and find out what other unit they make and steer away from them too.

We purchased a Whirlpool Cabrio washer brand new from Lowes. It did great for about 6 months when a terrible grinding noise started. Then it also would not spin dry the clothes - they would come out completely soaked. Repair guy came out and fixed it. Lasted for about 1 year - same thing again. Lasted about 1.5 years this time and now the loud grinding is back and my wife - who Ive heard cuss just a couple times in 20+ years - said, This ** thing sucks. The clothes are soaked. I cant stand this washing machine. So, Off we go to buy a new machine. Definitely not a Whirlpool though. Id give this machine 1 star because it does a decent job for a while but major repairs 3 times in five years is not what I deem an acceptable appliance.

I bought on 14/4/12 a Model-205 Orchid Wine refrigerator. The defrost knob was replaced by service last month, as it was not working. For the past four days, there are lots of water formation on the freezer door and vegetables are getting spoiled due to water formation. I request them to replace the refrigerator.

We purchased this dishwasher in June 2014 while putting home back together following fading of our home. Within 6 months of purchase the dishwasher was doing dry washes, and getting very hot touch. Whirlpool sent out repairman who replaced parts that had melted inside dishwasher and the control panel. This same thing happened 2 more times. A repairman came and repaired and replaced parts. In May 2016 it once again was running so hot that it burned hand when opened. Once again repaired but this time it started leaking from front dishwasher. When we talked to whirlpool they sent out repairman and assured us they would pay for any and all damage it had caused. They also replaced dishwasher with Maytag of our choice which they covered all cost. When installers pulled out the unit we learned the dishwasher had most likely been leaking the entire time, water damage up entire wall, cabinets ruined, countertops had been bubbling and separating from wall, floors ruined. We followed all instructions and had three contractors come to do estimates that were from 27,500-30,680. Whirlpool then sent outside adjuster because of cost. We have now received offer of 6700 and told we could take this or submit to our insurance company. Also we now have Mold in kitchen which they are aware of and we think the flooring is now rotting and breaking.

I bought my new Whirlpool Duet washer and dryer in November 2011. Washer was loud from day one, but I never owned a front loader and thought that is how it was. Then someone told me that meant the bearings were bad, so I called. While still under warranty, they did replace; and I had to wait 6 weeks. Then a few months later, it started leaking. I had the extended warranty, and A & E came out and told me the bearings failed again. And now, I get a check for $750. But the machine cost more than that. Do not buy any Whirlpool, Maytag, or Kenmore. They are all made by Whirlpool.

Refrigerator is good, keeps food at a good temperature, freezer keeps even ice cream solid. Only fault is draw in freezer does not hold as much as the old bottom freezer with separate unit for a draw. The refrigerator is nice looking and does the job. It just seems that manufacturers are always trying to make things better, but usually features were fine in older models.

Mtf18 defective refrigerator - The unit is 2 yrs old and about 6 months prior to 2014 I could not keep ice in the refrigerators ice (freezer) and the appliance compressor ran 24 hrs. a day without recycling or stop. I did not purchase an extended warranty, after all, Maytag the dependable company. The lonely Maytag repairman. Right!! The unit cost $$700. and is now an anchor. You cannot repair the compressor, only replace it...

Whirlpool gas range Model#wfg10h0ah1 with aqua lift technology. This is the biggest ripoff that was ever done to me. It say self clean, not it cleans and then you clean. This is fraud plain and simple. I am handicapped and made it very clear to the salesperson that it had to be self cleaning. 4 times I did the clean cycle and I was in shock, I called repair, I thought the self clean was broken. However this is the line they give you over and over, that its not broken. This is working the way it was designed to work. So they made a range that is self cleaning, but no it doesnt do that. For 899.99, I did not deserve to get duped like this.

We bought a Cabrio washer & dryer September 2010 for a room addition that wasnt completed yet. We didnt get moved in until the first of November. So the washer wasnt used until then. In January 2011 (15 months later) it stopped spinning so clothes were dripping wet. We called Whirlpool and were told that they would be happy to set us up for a service agreement for $322 for one year. We declined since we bought the washer for a little over $500. When we had a local Whirlpool service man come out and he determined that it was the control board which would cost $265 (Whirlpool only warrants parts 90 days). I sent an email to Whirlpool and was told too bad, so sad. We called their customer care line (that is really not the term for that phone center) and asked to talk to a supervisor, who essentially told me the same thing. Whirlpool is making equipment that is extremely poor quality. There is no incentive for them to produce a better quality product as they make money on the extended warranties that are necessary, or if you dont buy an extended warranty they charge an extraordinary huge price for their parts, which they dont warranty. We will never purchase anything made by Whirlpool. I am not sure where this useless piece of junk that I have will end up but I intend to let everyone I know what a terrible company Whirlpool is to deal with.

My Cabrio washing machine is a hunk of scrap metal after five years of lite use. Replaced the electronics first, then a year or so later replaced the motor. Now its leaking from the bottom. Repair man said it is not fixable. I did not buy a warranty because it was too expensive compared to the value of the washing machine. My recommendation to anyone buying a Whirlpool appliance is to buy the cheapest thing on the market, so that you can throw it away when it breaks because they are made to break so that they can sell you extended warranties.

I purchased my new Whirlpool Cabrio Top Load washer to replace a Maytag that had finally given out in the summer of 2012. I wish I did more due diligence, but with a toddler and a newborn, I needed a washer asap. I severely regret my $800 purchase from Sears. It is now February 2013 and the machine basically only runs on two cycles - Casual and Normal. All the others stop in mid-cycle. Sometimes, the items are still dry or partially wet so I need to switch to another cycle to complete the wash. This is not good for Delicates or when I wash Whites, Heavy Duty or Bulky items which is one of the reasons I purchased the model. The cycle stops when the items are soaked with massive amounts of water. So I then have to turn it to the Drain cycle and start over. After a day of washing one load, I couldve done it the old-fashioned way in my utility basin sink and hung it out to dry ... I dont have the time for this. I am going to make a formal complaint to Whirlpool and to Sears. I cannot keep spending nearly $1,000 for items that break within a year. These companies should be ashamed of their lack of quality. I shouldve gone with the Electrolux and just dealt with the price tag - I wouldve been much happier.

Whirlpool Duet Washer Trouble. Im having the same issue as Tom in Oakville. The F35-Sud errors pointed to the pressure sensor - NOT. 2 parts, a technician visit, and $800 later, Im still waiting on a Main Board replacement that is on nationwide back order. Time frame unknown.

Microwave model WMH73521CS-2: Microwave is approx 2.5 yrs old. This is the 2nd time we have had problems with door open and close msg appearing on display. We had to have door latches replaced once and again are having to have it serviced again. $100 for service to come out again, does not include cost of replacement parts. This seems to be a consistent problem with this model. We are not replacing the parts and are buying a different microwave. Definitely not Whirlpool. I called Whirlpool and was on hold for almost an hour and received no resolution to problem.

For the second time in 18 months, I have had to replace the top shelves on my refrigerator (Model #ED5VHEXVB01) because the cheap plastic borders have broken. The first time it was covered by the 1 year warranty, but this time (12/11) Ill have to pay $130 just for one shelf. Unless the quality of the product has improved, Ill probably expect to have to replace them again within the year. Needless to say, Ill never buy Whirlpool products again. Im out $130 because Whirlpool will not replace them for free because the product is no longer under warranty.

We bought all whirlpool appliances at our new home 4 months back. Our refrigerator has stopped working from the last month. We had 7 different service team people come in to check and they temporary resolve the issue (taking out a plastic piece from the top of the refrigerator, just re fixing the ice machine, or just walking out of our home doing nothing).Friday someone came and tried fixing it and took about 3 hours. The fridge completely Broke down after that in about 6 hours. Whirlpool customer care wants to send another technician in and want them to have them talk to their technician and maybe after that they can do something. This is the 8th time some technician will be coming home. And clearing these technicians curse whirlpool and dont call them. The customer team at whirlpool suck, there is no damn replacement or repair policy. All scheduling is after a week and whirlpool does not give a **. I really hope this company is sued for the emotional and mental stress and the harassment they cause to their customers. Very frustrated. Have no idea what to do.

It was not a good experience after I purchased a Whirlpool washer in Feb 2014. I have been going to Laundromat 5 months since I found the door did not able to secure. I reported in January 2015 and technicians from 3 different contractors made more than 10 visits for checking and replacing parts. Not only nothing gets done, I also missed work for all these days. Then I escalated to the Supervisor, ** and Miss ** in Executive Office of North American Region. Both of them are very nice that they understand the situation and how frustrate it is. Finally, ** said Whirlpool would replace it. ** told me that I should get phone call from H.H. Gregg within 48 hours. However, it has been two weeks and seems no one care. In this three days memorial weekend, I still need to go to Laundromat while they are enjoying BBQ with their friends and families. I dont know how long it take to replace it.

Never again will I purchase any Whirlpool product. I was seduced into purchasing a Whirlpool dehumidifier by the sale price at Canadian Tire. Big mistake! It worked as expected for four months before all the refrigerant leaked out - we found this out later. I contacted Whirlpool and was told I could take it to their authorized service depot (a 50 minute drive from here) for repairs. I did so and was charged $44.80 for them to troubleshoot the unit. Two weeks later they told me that the refrigerant had leaked out and it would cost $563 for repairs. For a $200 unit!! Get serious! I pointed out, according to my Canadian Tire receipt that the warranty was for 5 years on the compressor and sealed components. After further collaboration between the repair depot and Whirlpool, I was told that my warranty is not with Whirlpool but rather with the company that produced the unit for Whirlpool, namely Hisense and that the Whirlpool repair depot did not do warranty work for Hisense. I then had to fax the technician report to Hisense to get an authorization number for a replacement unit from Canadian Tire. Once armed with the authorization number, I had to visit my local Canadian Tire store and pick up the replacement. That unit worked well for about nine months before it failed. Considering service depot charges and all the driving involved, it cost me something like $100 for a warranty replacement (not including my time). No more fooling around with this junk. I just ordered a Kenmore dehumidifier. Hope that one is a better investment. I see now that Canadian Tire no longer sells these units. Maybe they figured it out. Judging from other Whirlpool reviews, it seems I am not alone in my views. My recommendation - stay away from Whirlpool!

Bought a whirlpool water heater less than two years ago and it has already failed. I could not find parts for it and was told by a lowes employee that I would have to call whirlpool on the 5th of July (three days away) to order any parts. I tried three plumbers in the Indianapolis area and they all told me that I would be better off replacing it with a different brand. I just put in a new rheem in its place. I will never buy another thing from whirlpool. They are no good.

We purchased a Whirlpool refrigerator from Conns Appliances on 2/2/12. It worked fine until about 2 months ago. Then it started freezing food in the refrigerator. We called Conns, and they sent a technician to replace the thermostat. A couple of days later, it was still freezing food. So we called Conns again. They sent a second technician. He called Whirlpool tech support, and they told him to adjust the position of the thermostat sensor. A couple of more days went by, and food was still freezing. The problem had gotten even worse.I called the manager at Conns and suggested that we should consider replacement since the previous 2 technicians were unable to solve the problem. He sent a third technician. Tech #3 called Whirlpool tech support and re-adjusted the sensor. He said there wasnt a lot they could do and that if I wanted to get it replaced, I would need to call Whirlpool.I called Whirlpool Customer Service and explained everything that had happened. They told me they would need to send another technician. I asked why, since 3 technicians had already looked at it. She said there were different levels of service and they would have to send someone from their authorized service company, as if Conns is not authorized. I asked if this problem was common in this model of refrigerator. She said she could research that if I could hold, so I said ok. After being on hold for several minutes, she came back and said she couldnt find any record of this being a repetitive problem.I didnt have a thermometer, and I thought if I had more concrete evidence of the problem, then maybe they would replace the refrigerator. So I put a glass of water in the middle of the top shelf. Within 24 hours, it was frozen solid as an ice cube!Technician #4 came and called Whirlpool tech support. This time, they told him that this had been a problem ever since this model came out and they had a fix that had been on the books since day 1. So the customer service lady obviously lied to me. Technician #4 stuffed a piece of Styrofoam in the hole where the air comes from the freezer into the refrigerator and he re-adjusted the thermostat sensor. I asked if we could just replace the unit and be done with it, but he said we had to wait and see if his fix worked.I went to Ace Hardware and bought a refrigerator thermometer. Two days later, we had frozen strawberries, frozen lettuce, frozen milk, and even the meat and cheese were freezing. My thermometer said temperature was 32 degrees. I called Whirlpool back and insisted that they replace the refrigerator. They told me The unit was not authorized for replacement and they needed a 2nd opinion. I was very angry. I told them there had already been 4 opinions and a 5th wasnt necessary. I wasnt getting anywhere, so I asked for a supervisor. They transferred me to someone named Sue. Sue told me the same thing - not authorized, need a 2nd opinion. I told her that I work at The Mens Wearhouse and that if a customer spent that much money on a suit and had trouble with it, they certainly would not have to bring it back 5 times to have it re-tailored. I asked to speak to her supervisor. She said, Sir, my supervisor doesnt speak to consumers. I could not believe my ears. Where would they be without consumers? I was so mad I hung up on her.Later, I realized I had no options and called to request the 2nd opinion. I was told that the technician could authorize the unit for replacement. They also told me I couldnt get a technician for a week because their technicians were all booked up repairing their faulty products. I had no choice but to wait. I moved my thermometer to the bottom of the refrigerator to see if the temperature was the same there as on the top. The temperature there fluctuated between 28 and 34 degrees. I called Conns to tell them the story, thinking maybe they would go to bat for one of their customers. They told me this should never have happened and that the matter should be escalated to their home office and that a manager would contact me within 30 minutes. He never called.Two days after that phone call, I went to Conns to speak to the manager. I told him the whole story and told him that if Whirlpool would not replace the refrigerator, then I would have no choice but to contact Discover (my payment method for the original purchase) and dispute the charges. I pointed out that even though it should be Whirlpool paying for it, his store would take the hit if Discover reversed the charges. He called someone and told me a Conns service manager would contact me within 48 hours.More waiting. Technician #5 came. I told him he was to authorize the unit for replacement. He said he couldnt do that and that Whirlpool tells all their customers that just to get them off the phone. He re-adjusted the temperature sensor and left. I was livid. Now the problem went the other way. The temperature wouldnt go below 50 degrees. We filled an ice chest with food and ice and began living out of it. The Conns service manager called and said he would have to send a technician. This would be #6. I was very angry with the service manager and called Discover to dispute the charges. Discover opened an investigation, sent a letter to Conns (and maybe Whirlpool, Im not sure) and issued a credit to my credit card account.#6 came and re-adjusted the thermostat sensor. The next morning, he called to see how it was doing. The temperature was still around 50 degrees. He wanted to come and adjust it again. I told him to get the unit replaced! So he submitted paperwork to request a replacement. He called back and said that he felt sorry for us because he knew we had a 3-month-old baby in the house. Since the replacement had been requested, Conns wouldnt pay him to come again; but he said he would come on his own time, on his lunch break, and readjust the sensor in hopes that it would get us by while we waited for a replacement. He said it might take 3-4 days to get the replacement. I told him he could come, so this was technical visit #7. He adjusted the sensor. The next day, the temperature was still 50 degrees.I called the service manager at Conns to confirm that they had requested the replacement. He said the paperwork was submitted, that the home office would review it, make a decision, and that we should know something in a couple of days. That was on Wednesday. On Monday afternoon, I called him again. He said the paperwork wasnt submitted to home office until Saturday and that he was expecting to hear from them by end of day Tuesday. In the meantime, we were still living out of an ice chest.I had already determined that Whirlpool wasnt going to help me, and now, Conns was giving me the runaround. That afternoon, I was working on a project at work with a lady who was fairly new in our company. Turns out she used to work at the Conns home office and she knew people in high places there. She called a VP on my behalf. The next morning, I got a call from the VP telling me that I could get a replacement. I dont think I would have gotten my replacement if I hadnt bumped into the lady who used to work at Conns.I called Conns store, and they said a credit had been issued and I could come to the store and pick out whatever I wanted up to the amount of the credit. I knew I didnt want another Whirlpool. The selection was very limited, but I found a Frigidaire that I thought might work. Then they told me I would have to pay extra for an ice maker, even though I had bought the ice maker for the Whirlpool that was being replaced. I argued with the manager until finally he agreed to give me the ice maker, delivery, and installation.Yesterday, Conns called to tell me they were coming in the afternoon to install the refrigerator. They had the audacity to ask me what was the matter with the unit they were replacing! They did come and replace the unit. But wait...Thats not all! This morning, the ice maker had not made any ice, even after running all night long. Conns sent a technician today, and he said all of the parts were not installed and it was preventing proper water flow. He is coming back on Tuesday to install the missing parts. So we still arent done. I dont know if Im more angry with Whirlpool or with Conns. Whirlpool did not honor their warranty and Conns got stuck with it. But then Conns provided poor service too. I got stuck in the middle, and it still isnt fully resolved.

I have purchased Whirlpool washing machine from A.K. Gandhi, Nagpur Vide. Invoice no. ** (JAYANT **-PURCHASER). Item detail - (LLP2187) WPL W/M STAINWASH DEEP CLEAN 65-GREY 10YMW 3110601162712159, Nagpur on 5th Sept 2016, since two days it was making noise, so I called service centre on 22nd Oct 2018 and he attended same, accordingly him gearbox has problem and needs to replace for which expenses would be around Rs. 6000. Its very surprised how can machine develop such big problems within two years of use. I have paid him Rs. 350 as service charge. Serviceman mobile no. **. You are requested to do needful and arrange to replace faulty part within early period as fault lies with company. How can company supply such machine, which develops problem within two years. This machine is in extended warranty period.

I purchased a Whirlpool Ref side by side 11-2013. I have had nothing but trouble. First the Ice maker leaked, was fixed. The door to the ref has had serviced 5 times. The tech after many times trying to fix hinge on door twice was told to order new door. This took 6-8 week to get. Came today 5-27-15 too but new door on. It is still not right, has big gap in the middle - still not level as should be. I have called Customer Service again today with no help. All they want you to do is spend more money on a contract. I THOUGHT WHIRLPOOL WAS SUPPOSED TO BE A GOOD PRODUCT......NOTTA....WILL NEVER BUY THIS PRODUCT AGAIN. SO IF YOU EVER BUY WHIRLPOOL PRODUCT BE SURE TO GET EXTENDED WARRANTY. YOU MIGHT NEED IT..........STILL NOT SATISFIED AND NO HELP IN SIGHT.

Love the chrome exterior and overall appearance of this side-by-side. The compartments and shelf spacing are well thought out & offer flexible adjustments. The outside components on the freezer (crushed ice, ice water, ice cubes, & light) I love, and most importantly the unit comes with a built-in replacement water filter.

We purchased the Whirlpool Duet (front loader) washer and dryer in 2005 from Best Buy. We had many problems with the washer leaking around the front door. After several visits, Best Buy (in 2007) said we could pick out a new washer. We picked out the Whirlpool Cabrio. About 2 years later the mother board had to be replaced on the Cabrio. We are constantly getting F codes and have to unplug the washer several times for it to reset. It also sounds like a plane getting ready to take off and from what I read that repair is very costly. It has been leaking as well. I contacted Whirlpool today and they informed me that there was no recall on the machine and when I told them that there were many complaints for the same issues online, they said they do not base their recalls on blogs and to fix the problem, I would have to incur the cost. This machine is the biggest piece of junk that I have ever owned. I will be sure not purchase a Whirlpool in the future!

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

I’ve purchased a front washer and dryer and storage units, directly from Whirlpool. When the delivery people installed the units, they did not install the rubber gaskets that are required between the units. I’ve purchased rubber pads from Lowe’s, but the washer still shakes uncontrollably. What do I do now?

Our Whirlpool Cabrio Washer is barely over one year old, and its getting increasingly louder (I cant hear the TV in the other room). I researched this issue and found this is a common problem with the upper and lower bearings. Check it out on YouTube; its easy to find. Whirlpool should buy these back! Is anyone aware of a class action lawsuit against Whirlpool regarding these pieces of junk?

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

After 32 years of marriage and nothing but Whirlpool (because my mother swore by Whirlpool), that is all we have used. I am so disappointed in the Cabrio washer/dryer set we purchased at Lowes. After 18 months, the dryer just quit. The best part is, we hang clothes out most of the time. It was used one winter, $1400 wasted. We put a cheap Admiral in our second home and spent $500 total and they work fine. I will never ever purchase Whirlpool anything or recommend to anyone. Again, you lost a family tradition.

I purchased a Whirlpool side-by-side refrigerator from Lowes for $1,100. It arrived missing a shelf. Last year, the warranty expired and the ice maker mysteriously failed. Next a drawer slide failed. Next the lights, both of them, failed. I was offered a service call, the estimate $300+. Next, the ice bucket bottom broke and filled the freezer with cubes. Next another drawer slide failed. Whirlpool makes an over-priced, poorly engineered, poorly made product and Lowes sells their products without any care for their customers. I will do my best to warn anybody who is interested that while Whirlpool used to be a good company, it has degraded into producing junk and trading on a once storied reputation. And Lowes touts these products without any interest in its consumers.

Had the entire kitchen remodeled. We bought a Whirlpool Gold French Door refrigerator from Sears, did not buy an extended service contract. The refrigerator has NEVER made an ice cube. The water dispenser in the left door sometimes works, mostly not. The fridge freezes the food inside, temp. set at 41°F. The entire ice maker has been replaced, several valves have been replaced, a service company rep. tore the back off the fridge, found some insulation misplaced, said he repaired that. We have been very patient. Three repair companies have been sent out by Whirlpool, two said the refrigerator CANNOT BE REPAIRED. Whirlpool told me the only resolution is repair.Whirlpools Customer Experience Center is a joke, they do nothing but try to schedule another repair call. Tell you how sorry they are about your problem but do nothing to solve the problem. Carefully trained to give you the BIG runaround and nothing else. You never get the same person twice or the same city twice. Patients exhausted. Calling my lawyer. I would strongly advise anyone needing a new refrigerator not to buy a Whirlpool product. You should also check the list of other brands they make, there are several. I wouldnt buy them either. Buy a fridge made in Japan by a Japanese company. They get it right and know the Quality Process.

I have been noticing my husbands shirts as well as my clothes continue to get what are spots of bleach and I do not use bleach on anything other than whites. This has been going on for quite some time and I noticed this morning another outfit is RUINED because of bleach spots. I decided to look up on the internet if this is a problem with this machine - AND IT IS! I am so disappointed I could cry. The clothes I have are donated to me. All my clothes are hand-me-downs - and my Whirlpool washing machine is ruining all my clothes and my husbands.

I purchased a Whirlpool microwave model #WHM3205XVS1 on October 2, 2011. The handle broke off in little pieces and was repaired in March 2012. Handle broke off again in little pieces in September 2012. This will be the 3rd handle that will continue to break in little pieces every 6 months. According to both repair men that were here, this is their comment: No customer abuse, this is a very common problem with this model. After to speaking to 3 people at Whirlpool, I was told by everyone, This is cosmetic problem and we will not fix after the 1 year manufacturers warranty is up. I started with the the first person, went to her supervisor, then went to her supervisor. I am now waiting for a call from a manager although I was told I will continue to get the same answer no matter how far up the chain of command I go. So, I was told that it is okay to have 2 screws sticking out holding the remaining part of the handle that is left, because it is a cosmetic, not a functional problem. I will never stop with Whirlpool. I will call 4 times a day if necessary. I will never purchase another Whirlpool product again! I will tell everyone I know not to purchase one of their products. Be careful. They manufacture products for many other companies, i.e., Sears, Amana, Jenn-Air, and many, many more.

I really enjoy the self cleaning option on this unit. It really cleans everything without chemicals and then you just vacuum up the dust. My dislike is the ceramic top though. The top scratches really easily and hard to clean up spills during cooking. Overall I would give this stove a b rating.

Stay away from all Whirlpool products. The appliances are terrible (broke twice for different reasons within 14 months of purchase). Customer service wait times are over 90 mins and the technicians take over 3 weeks to get to the house and they dont fix it, they order the part and that takes another 3 weeks for it to arrive and the technician comes back. We bought an extended warranty and when the fridge broke a second time, they canceled the warranty and said they had the right to cancel it as it was in the contract. Terrible, terrible company. I work in the service industry and I am in shock that this company can get away with treating customers like they have.

Ive been thru 2 new French door refrigerators with the icemakers in the door. Ive lost all of my food more than 6 times! There is a design flaw and they are no longer making the large models. I finally figured this out after reading multiple reviews from a lot of people with same/similar experiences. The compressor freezes then the loud noise all while the temp slowly lowers and ruining your food before you know whats happening. To add insult to injury... After ordering my THIRD replacement, their contracted installation company wont communicate with me to let me know when it will be delivered. Ive been without a fridge for 3 months! Calling them takes a full morning with hold times over an hour! I will never buy another product from them. I have a taboo LG French door with an ice maker in the door in my other home and it has been perfect for 7 years. Just be very careful and read reviews from people who have owned one for at least a year.

My water heater was installed in 2007 (model BFG2J5040T3NOV). It has required 3 repairs in 4 years because part failures make the pilot light shut off. The gas controller was replaced in 2008. The manifold/burner assembly was replaced in 2010. This month (August 2011), I have replaced the thermocouple, which did not fix the problem. Now I am having to replace the gas controller again. The part is failing, but not completely inoperable, so occasionally when on the phone with customer support, the pilot light would stay lit. When this happened, the tech would act as if the problem was solved and tell me to call back if the pilot light went out again. The next day, the pilot light would go out again. Thus, I have spent several hours on the phone with customer support running the same tests and answering the same questions over and over again.

My Whirlpool washer broke down on July 06, 2014. I contacted the local supplier (Unicomer Trinidad) on July 07, 2014. Their technician came on July 10, 2014. He said that he will have to check and see if they have the part that is needed to repair the machine, they will contact me the next day. No one contacted me. I called on July 14, 2014. I was told that they do not have the part and it has to be order. It will take about 2 weeks for it to reach them, no one contacted me since. I contacted them (Unicomer Trinidad) on August 04, 2014. I was told that they do not have the part and it will take 2-3 weeks to reach them. I did filled out a form on the Whirlpool support site about 2 weeks ago but no one contacted me. I contacting Whirlpool US HQ by telephone, they gave me a number for Whirlpool Florida. I was told that they are responsible for my area but when I try calling the number, it was out of service. When I contacted back Whirlpool US HQ, I was told that they cannot help me check the website for the local representative which I could not find. This washing machine is 10 months old plus I took the extended warranty. It is a Duet WFW94HEXL2 washer.

Our Model # WRF532SMBW refrigerator was purchased on 8/21/14. In the last several months, it has begun having problems with ice build up in the bottom of the freezer, as well as water puddling around the front legs on the floor. I called Whirlpool and they suggested it was our water line, but it does not leak onto the floor daily. They then suggested I have a serviceman come out for a $120.00 service call, plus whatever other expenses that occur. Or, I could just pay $322.00 and that would take care of the service call, parts and an additional one year warranty. We just bought this refrigerator 23 months ago and it cost $1618.92. Now I need to spend $322.00 additionally! What a rip off. Do not purchase a Whirlpool Refrigerator or any of their other appliances. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 2 years old.

Purchased this oven on 9/12 from Sears, did not purchase an extended warranty and didnt think it was necessary. Im a 64 year old widow and only use the oven on holidays, to date Ive used the over 5 times. With Easter coming, I decided to clean the oven. Followed the instructions, the door locked and the oven died. Im totally disappointed, now it would cost over 100.00 to repair, money I cannot afford. Called Sears and all I was told over and over again that they can send a repaid person and I would have to pay. I was also told that I should have purchased a Kenmore and I wouldnt have had a problem and finally I was told that they couldnt fix it and referred me to whirlpool customer service, who also told me it would cost over 100.00. A 19 month oven should not have died. It should have cleaned the oven and continue to work for many more years. Again, Im upset, angry and disappointed with sears & whirlpool. And dont know what to do. Does anyone else have this problem with the oven, is there a recall?

Whirlpool has always been known for quality products. But the range I haves burners are failing. It is eight years old. Think it should last longer than that. The oven works good, but the temperature varies as well. Lower oven door is designed bad, because grease gets trapped between the two glass doors and cant be cleaned.

Purchased a new Whirlpool washer and dryer at HH Gregg about 4 months ago. We complained to HH Gregg that the low water washer wasnt working correctly. It will only get about an inch of water in it causing buttons to be torn off... just beating up wet clothes. HH Gregg told us to try a few things. When we went back to HH Gregg with the same complaints they told us it was too late and call Whirlpool. Serviceman came out and said everything was fine with the machine, we just need to load more clothes! We are only 2 people, one of us wear a uniform and needs washed when we may not have a full load. Called Whirlpool to complain again and they said there wasnt anything they would do except send out another service person for a second opinion, which just means taking more time off of work. HH Gregg talked us in to this type of low level washer. We are still making payments on it!!!!

I have the Cabrio washer that is only four years old. It is leaking oil and is very loud during the spin cycle. I paid $800 for this washer and am extremely frustrated that it didnt last longer than this. I contacted Whirlpool customer service and had no luck since it is out of warranty. Due to the high number of complaints with the same issue, please consider a class action lawsuit. Thank you.

I had my entire kitchen re-modeled in May of 2013 and purchase all new Whirlpool appliances. I work for Standard Pacific Homes and purchase the identical appliances we provide in our homes. I am so disappointed in the refrigerator. Two months ago it stopped making ice and I was told to replace the filter and it would be OK. I did that and still no ice. I bought ice trays. A couple of days ago, I came home to find water on my kitchen floor coming from under the refrigerator. I called Whirlpool again and no real help.... Told me to call Lowes. I called Lowes and they gave me 3 more numbers to call for service. None of those service providers had any available appointments and told me to call Whirlpool. Meanwhile my refrigerator is standing in the middle of my kitchen so I can keep the water mopped up. The refrigerator was so difficult to move. Getting the feet moved up so the wheels could touch the floor took an hour and I ended up with bruised hands. My lesson in this is to buy a better brand next time and go top of the line. I sell these to our buyers at Standard Pacific Homes everyday..... Wish I could believe in the product.

We purchased a Whirlpool water heater from Lowes in 2011. Everything was fine up until June 2015. We got the dreaded 4 flashes. We called for service to come out, that costed us around $300. December 23rd of 15 it goes out again. We called Whirlpool instead of a service company and the part was under warranty. We paid for overnight shipping but because of the holiday it was not guaranteed. We told them we are fine with Sat. delivery. In the meantime we had to cancel a holiday party scheduled at our house the 24th. We waited around all day Sat. for the part to show and nothing. We called Whirlpool to get the tracking number and we find out that the other service rep didnt mark our package for Sat. delivery. I am very close to just buying a new heater. I am trying to tell everyone I can about how horrible Whirlpool is. I feel sorry for any suckers that buy based on the name and dont do their research.

Lu ** is a mgr. at Whirlpool customer service. Shame on you for the way you spoke to me. Then giving me a joke # to call... Karma sucks is all Ill say to you. I have to wait on the phone to speak to anyone is over 30 mins. Just to get pushed off to the side like I dont matter. Im trying to get help to have mine looked at to pass the time for another Whirlpool to come to me! Mind you mine didnt last 4 yrs. Yes I was trying to buy another Whirlpool but after this sloppy customer service. You dont need this stress... Stressful enough that these washers dont last anymore. Ya GE AND MAYTAG ARE LOOKING BETTER AND BETTER.

0 stars. The refrigerator coil keeps freezing. There seems to be no defrosting, there is no element to do this so it freezes every 5-6 months. No warranty. I bought it as is but seems to me a function it should have isn’t working. They should fix them. Ill guess it’s just business, hope theyre ok with St. Peter’s showing them the way down to hell while he’s saying it was just business.

We started noticing pools of water on the floor on the left side of the freezer. We would then open up the drawer and it was covered in ice. The water was not noticed until the morning so it has caused damage to the floor and molding in our house that was built in 2012. I called the repair company that I used to have my Whirlpool oven fixed (broke twice). That is when the manager gave me the lowdown on what has been happening with this fridge. He told me to call Whirlpool and have them pay for the repair and part and to research online, that it is a design flaw with the freezer and the p-trap and draining under the ice maker being not efficient.I called Whirlpool and complained. All of my appliances are Whirlpool and I spoke to a Supervisor. They only would not agree to pay for the repair and only will pay for the part (which is only $27.00). This fridge is 15 months old and I am irate at the lack of customer loyalty from Whirlpool. They responded the exact same way when my oven broke a month out of warranty. I will never buy another Whirlpool appliance again, and would like buyers to be aware before they buy an almost $2,000 fridge.

This has been the worst purchase I have ever made! Within 2 months of it going out of its one year warranty I called (Lowes) to have it repaired. Spent $300 on the first repair to get rid of the jet engine sound AND the oil splatter all over the floor then within one month from that repair it has a F code error and wont finish washing a load. It just stops. I have tried everything from unplugging it to restarting and it just wont work. Now have to wait 1 week for the repairman to come back out (hopefully that warranty of 90 days will be helpful). Do Not Buy this machine!!!

I have a Whirlpool built-in double oven. It is 7 years old. The top oven has overheated 3 times with food in it and it locks the door. The oven beeps and says, Too hot, and locks the door. Luckily I was in the kitchen when it overheated, so I could turn the oven off. After turning the oven off, the oven has to cool off before the door will unlock and the food can be taken out. By then, the food is really burnt.I called Whirlpool to see if there is a recall and they said, No recall, and the oven was out of warranty. So I called the repair shop. They said it was the control board and they were not sure they could get a new control board. I may have to find someone that can rebuild this control board. They said not to use the oven. It could cause a fire. I would think that they should recall these ovens. They should have a safety switch that shuts the oven off if it overheats like mine has done.

My wife and I bought a Whirlpool Cabrio washer and dryer set in 2011 and now the washer has an error code of F7 E5. I spoke with an appliance guy and he says that it is going to cost up to $450 to repair it. The wash cycle does nothing, it just sits there and then it goes to the next cycle. I have grown up in a household that had washing machines that lasted many years. This is a joke. Why am I having to buy a new washer in 3 years? I dont understand. Whirlpool knows that this is a problem and they should step up and do a recall or some kind of discount towards a new machine. This is ridiculous.

People should consider themselves lucky to get 2 yrs, 1yr, 6 mos out of these pieces of junk. Mine replaced an 8 year old Bradford White that was originally installed when the house was built. Funny thing, we had the exact same BW in our last house. Same problem after exactly 8 years - tank leaked. Anyway, this Whirlpool 40 gal gas was installed by a professional plumber ($200) and ran fine for 6 days before the pilot went out the 1st time. In the next 10 days it went out 9 more times until it wouldnt stay lit at all. I would light the pilot and it would be out in 5 min or less. I watched for the error code the last time - 2 flashes which indicated thermocouple low voltage. This is totally ridiculous. After research - which I should have done before I bought - it looks like a total bad design problem with associated customer service nightmares and much additional cost to the customer. AND EVERYONE WHO MAKES AND SELLS THESE THINGS KNOWS ABOUT IT. Attempting to fix this thing - even IF labor was included - looks like throwing good money after bad. When are these companies going to be held accountable for producing cheap poorly designed products and then let the consumer foot the cost of labor and/or replacement. You can say all you want about less government but this is just a small example of what you get when you have less government. Doing further research, it looks like NO manufacturer of gas water heaters can produce a reliable product now. So now, Im installing a Bradford White ELECTRIC water heater. Thats and extra $250 for the electrical service that needs to go in. AND additional for the actual install by a plumber. At least Lowes is not giving me a hard time about getting all my money back for the Whirlpool since its less than 30 days since the purchase. I guess I should consider myself lucky it malfunctioned almost immediately. Total out of pocket on the initial Whirlpool install: $560. Total out of pocket with reinstall of BW Electric: $1000. My time spent on this mess: priceless. At least we will have hot water, even though it will cost more per month in electricity to do it. Thanks Whirlpool - stay classy.

Purchased this fridge just over a year ago WRF555sdfz for over 2K. The stainless steel is starting to come OFF. Advertised as stainless Steel. Must be fake! Called customer service. I was told they could do NOTHING because it was a cosmetic issue. Remodeled our entire new kitchen. Thank god other stainless steel appliance are made by other manufacturers with no “COSMETIC” ISSUES. Will never buy another Whirlpool product and I will tell everyone I know.

I first want to begin by saying that we have been a Whirlpool family for years. I now own a Whirlpool microwave, hot water heater, washer/dryer, Jenn-Air stove and dishwasher. My problem now is with the Cabrio Washer purchased in 2008. I started having problems in 2011 and the same problem has raised its ugly head again. When I try to use the Clean cycle, it starts at a 60-minute cycle and goes down to a 2-minute cycle in 3 minutes without cleaning or even running water into the tub. This time, it made a terrible noise and stopped. The tub was replaced in July 2011 after having the same complaint as above. The repairman said that the mechanism on the tub to fit into the spinning cycle is made of plastic and is not holding up. Also, in March 2012, a new control board was installed. I spoke to Whirlpool Customer Service and they informed me that they did not have any other complaints about the Clean cycle and that I should call the repairman. Luckily, I purchased an extended warranty. I vote a thumbs down on the Cabrio washer.

This machine does not clean the clothes well, keeps an odor even after using Clorox (probably due to water inside that never leaves), and does not spin the clothes well. Every washing is longer than traditional washers and then I must use the spin-only cycle twice (adding another 30 minutes). I must also shake the inside of the tub to get the spin to work at all. The tech came out and re-calibrated, but to no advantage. Terrible machine and should be, as one viewer said, under recall, in my opinion. NOT WORTH THE MONEY -- and I am very disappointed in Whirlpool.

I bought the Cabrio Platinum Set approximately 3 yrs ago. These is the worst products I have bought ever. The dryer didnt dry properly since day 1 w/the energy saver setting. I have always had to run a time dry in order to get properly dried clothing. Sometimes things still come out damp. The washer well the washer as I said the WORST product EVER. Approximately 3 yrs old and it leaks all over my laundry room unless surrounded by towels to suck up the water. During the wash it has the worst smell ever. And while spinning it jumps around and is so loud, you can hear it all through my 3 story home. We have complained we have written, emailed, called and have been offered nothing. I can honestly say I will NEVER buy another Whirlpool product again ever.The least they could do is stand by their product. For the price of this set it should have lasted much much longer. I had a Kenmore washer and dryer set that we bought it was not even top of the line I would say probably a cheaper model of theirs that lasted 10+ yrs we bought it brand new and my friend bought it when I changed to a front loader which by the way was one of the cheaper ones but was still better than this piece of **. It started breaking about 1 yr after we bought it. We have already fixed a few things but will not spend another dime on it. Now its not even cleaning. I now have to buy yet another washer. From what I have read either Whirlpool needs to up their game or just go out of business.

For years, Whirlpool has had an outstanding reputation for quality, so I cannot understand why a refrigerator I have owned less than three years has to have all the shelves and bins replaced. Not the glass, just the plastic. They actually started breaking the first year. I have literally had to tape my shelves together. These are very expensive and yet they are very low quality and of course are not covered on the warranty.The plastic is not built to withstand the cold and/or weight of food products. They need to get rid of the plastic and replace it with metal. I dont want to replace them with the same low grade products. I own the model ED5JHEXTB00 serial # HRU4010107. Also, the ice maker has been replaced twice. What has happened to Whirlpool

The interior has an excellent layout and accommodates our oversized dishes. The racks operate with ease. The outside appearance is tastefully done and the noise level when in operation is very low compared to other brands we have owned. We are pleased with the overall operation of this unit and would recommend it to others.

I’ve had the dishwasher for at least 3 yrs. if not longer. I have a long history with Whirlpool products and so far I haven’t had any problems with my past purchases. They normally wear out from age because if you take care of it normally they last for years.

We purchased the Cabrio washer & dryer with 6th Sense technology in 6/2007. What a mistake it has been. We have had 3 F1 error codes that a repairman has had to come fix all about a year and half apart. It makes crazy loud sounds if it decides to actually spin in the final spin cycle. It normally does not spin. It just always flashes UL for unbalanced load. We are extremely dissatisfied with this set. The dryer heating element has gone out also. We just purchased a new part. Prior to this, we had a hand me down washer & dryer that worked excellent. We regret getting rid of them, and now need to purchase a new washer & dryer. Whirlpool ought to stand behind its products and get this fixed.

I bought a full kitchen appliance package 3 years ago, the gas range Clock LED started cutting off the line at the top of the numbers... when the range was about 1 1/2 old... Now 3 years later the range doesnt hold its oven temperature, the cost to fix it is $230 more than what I paid for the range. Whirlpool is unwilling to stand behind their product or provide a replacement part for a reasonable price. So now I will be buying a brand new range and the 3 year old Whirlpool will be taken to the dump. I will never buy a whirlpool appliance again. I thought Whirlpool was a good brand and a reputable company until now. Please beware when buying appliances, whirlpool is not reliable or reputable.

1st range arrived in June and would not heat to temperature. Sensor and control panel replaced. After 3 techs Whirlpool agreed to replace in September. 6 weeks later new range arrives. Protective film stuck to the lettering and when you try to remove it the lettering comes off. Chunk of enamel missing off inside oven door and defect in the glass cook top. Fast forward to today. THIRD range delivered. Same issue with the protective film and gouge in chalking around cooktop. Leons has been fantastic. They are replacing it with an entire new brand!

I absolutely hate this expensive piece of junk. I have tried everything, and my clothes are not clean. It is only myself, and my husband, and our clothes dont get very dirty. I would like to send this junk to the junkyard, but I spent a lot to get the dryer with steam that went with the washer. This experience has soured me on Whirlpool appliances, and now I learn they also make appliances for Maytag!

Microwave didnt even last 2 years. I bought all new Whirlpool Appliances less than 2 years ago & they were not cheap! The microwave wont work until the light comes on inside. Well for some reason now it takes almost 10 minutes for the light to come on & I have to leave the door open until then. Now today I cant shut it because the light wont shut off & if I try to shut it the fans runs constantly. So frustrating as they dont stand behind any of their products! I will never ever purchase anything Whirlpool again.

I had an electric 36 Whirlpool, smooth top cook top for 18 yrs. Worked great, cleaned with Windex and occasional scraper. Didnt show streaks or spots. I remodeled my kitchen 10/15 and bought a KitchenAid 36 glass smooth top vented cook top. What a piece of junk. Wish I had kept my Whirlpool. I can not get it cleaned. Every little fingerprint, mark, etc. shows. I thought KitchenAid was an upgrade to whirlpool but I was surely wrong. I am glad that I didnt change my built-in double oven. I did change out the Whirlpool quiet gold dishwasher for the KitchenAid. Again, wish I kept my Whirlpool. The KitchenAid is noisier, looks terrible with the stainless inside. Im embarrassed to open it with all the water stains. My Whirlpool was white inside and looked like new. I wish I had the money to change it back but I dont unfortunately. Moral of the story is if it aint broken dont fix it!

I purchased the fridge 2nd hand in 2013. It was 10 years old at the time. It is still going strong & I purchased it because it has a frost-free freezer that never needs de-frosting and I love the features & size - its the PERFECT FRIDGE. What I look for in a fridge is its colour - I like metal, steel grey colour. I go for reputation & quality. Frost free is the biggest factor that determines my purchases, long-term (10-year min.) warranty & guarantee, size.

Whirlpool Duet WFW94HEAW0 Washer - Bought the machine in Feb 2014 and was generally very pleased with it. However a few weeks ago we started getting oil/grease stains on clothing. Wasnt sure what was causing it but it has now got so bad that the machine cant be used. An internet search indicates it is possibly a ball racer ring and doesnt sound an uncommon issue. A call to Whirlpool resulted in a quote for circa $350 for a service call. Thats a 1/3rd of the original value (includes a 12 month warranty). And its just over a year old!!! We had a problem with the Maytag Neptune that ended in a class action suit and now this replacement machine seems to be even worse. I would recommend anyone to really consider what to buy and give this range a miss.

We have front loaders. Far, far less damaging to the clothing than a top loader with agitator, would never go back to top loader. That comes with a caveat though. There is a difference you may not realize between the two styles. With a front loader comes a little maintenance. You will need to clean the washer periodically. Most all the stores sell the cleaning tablets and no, not all cleaners are created equal. I will only use Affresh after testing most of them. With a front loader there is always some water in the bottom of the drum, even after the cycle ends and even when it looks empty. So if you wash real dirty or smelly things, you’ll want to run an empty cycle to rinse out that leftover water or run with cleaner.In between wash days you’ll need to leave the door open so it doesn’t mold or mildew. The door gasket/seals will show mold and mildew and or you’ll get a mildew smell in your clothing. The only issues we’ve had with these units were the learning curve on front loaders in general and with the dryer we had the water valve for the steam function stick open (after 5 years) but it was due to calcium build up from our well water, not a issue with the machine itself.The dryer lint screen could be better. It is vertical so as the lint builds up during a cycle it drops to the bottom and accumulated at the bottom falling off as you pull it out each time to clean it. The lint catches on a crazy amount of extrusions inside the lint trap which also makes it nearly impossible to get down in and effectively clean all the crap out. One last thing if youre changing from top to front loaders. Buy the peristalsis, they’re expensive but it’s a pain in the butt to get stuff out if you don’t have them. Overall we’ve been very happy with our Whirlpool front loaders and would confidently recommend them to you.

We purchased a gas range (Whirlpool AccuBake model # mfgxfg361lvt1 serial ry1810956) a few years ago and have been very unhappy with the gray grids that it came with. We wrote to you about how we should clean them and you recommended heavy-duty degreaser, pin31552a and gas grate & grill cleaner, pin3167a, which we purchased. Neither worked, even with heavy elbow grease. We are very upset. We have purchased Whirlpool products all of our life and would like an answer or some type of explanation. If possible, can we get the grids in black? We try our best to keep these things clean and this is a very bad patten.

The dishwasher racks in Whirlpool/Amana/Kitchen Aid/Maytag dishwashers do not last as long as the dishwasher does. The vinyl coating on the cheap metal tines wears off causing the metal underneath to corrode and rust. This rust will deposit on your flatware, stainless or otherwise. When the vinyl coating wears away at the base of the tines, the tines will break off, creating more opportunity for rust to deposit onto flatware. You can purchase new tips for the end of the tines, and more vinyl to paint onto the tines, but you cannot replace the tines themselves or paint the vinyl onto any rusty surfaces.Another option would be to buy a new rack. A new bottom rack costs almost half of what a new dishwasher costs and if you need both top and bottom racks, you will pay almost $400 for the pair. Whirlpool was not amenable to negotiating a better price on the racks, but they would sell me a new model at a price that was close to what it would cost to replace both racks! Now does that make sense? Does it make sense for appliance companies to cause consumers to have to throw out an entire appliance rather than fix it? No, and it is creating more waste and filling more landfills. My dishwasher has run great for 7 years and I refuse to buy into the rack racket! No more Whirlpool for me!

I had started the dishwasher and had gone to bed last night. I came downstairs ten minutes later to get a bottle of water. There was smoke throughout my downstairs levels. Our Whirlpool Gold Dishwashers control had dark, noxious smoke emitting from it. I tried to turn it off but it was too hot to touch. I went to the breaker box and shut it off there, turned on fans, and went back to bed. This morning, it turned the electricity back on. It started smoking again. I tried to cancel the cycle but it wouldnt cancel. I opened the door to stop the cycle and it continued spraying water and still wouldnt shut down. I had to shut it off at the breaker again. Next problem is my refrigerator, washer and dryer are all on the same breaker. UGH! This is the second Whirlpool I have had. The first one had a rusted tub that leaked into our basement. The repair guy said he had never seen that before...sure...why would you put something in a dishwasher that would rust out on you? Whirlpool, NEVER AGAIN. I WILL PASS THIS INFO ON TO EACH AND EVERY PERSON I EVER KNOW. COUNT ON IT.

I went from an HE front loader to an HE top loader (Whirlpool Cabrio WTW7000DW0) due to the risk of mildew with the front loader. Im not the only one doing laundry and if someone else does it, it always seems that they shut the door when empty, contributing to moisture and mold that needed to be cleaned out of the gaskets. I am so unhappy with my top loader HE washer. When I stop the machine and look, I always see my laundry half covered with dingy water, sometimes part of it still dry at the top and it is disgusting. I frequently have to rewash loads due to detergent getting trapped in folds or pockets created that hold on to dirt and lint, even being careful with the detergent amount. I run the washer now every time with settings of deep water, extra rinse, heavy load and presoak with instructions, with settings taped to the top for others.At almost 1 1/2 hours each load, we just cant keep up. The laundry still forms pockets and sheets form a giant tent over the entire load that has to be unraveled at the end of the cycle and wound so tight it had no chance of rinsing. I had to get a repair person out because it got out of balance and he had a small hand-held computer to enter a code to rebalance it. When we discussed the issues I was having, he was ready for everything I was doing wrong. He told me I can not wash blankets or large items (I thought I was buying large capacity with such an enormous drum). He told me they have caught people adding water with a bucket during cycles and that the washer software can tell them if people are trying to work around the system which voids the warranty.Apparently, this is a common complaint he blames on the government wanting high efficiency so they make the numbers look good, sacrificing the ability of the washer to perform at what a consumer expects. I have never seen the water in my drum higher than a couple inches and the drum is HUGE, but never used to capacity. He told me his wife demanded they get a commercial washer because she was so angry about how poorly it cleaned. I feel so scammed and I wish I could have my old agitator back. $100 for the repair call, $150 for the code to be put in and Im on warning that they will see if I try to add water, run out of balance or dont comply with any reason they can void the warranty by just checking the data the washer is collecting on us.

My washing machine quit working with one month left on the warranty. In trying to schedule repair I was never able to talk to a live person. Via chat and online scheduling they could not or would not come out for 10 days. Also they would not approve use of a local repairman who was willing to work on it in 2 days. Waiting 10 days for service on a washing machine is crazy.

I purchased a side-by-side Whirlpool refrigerator in May 17, 2010 from Lowes in Gilroy. After 17 months of service, the compressor went down this morning. I have called the service center and they cant give any help because it was over the 1-year limited warranty. More than $500 is good for just 17 months usage. Would it be worth it to have Whirlpool appliances? Do think about it before you choose a Whirlpool refrigerator.

I purchased this microwave in September 2010. It was installed in a vacation home, so it has actually been used for less than one year. It has now stopped heating food for the fourth time. The previous problems miraculously fixed themselves after flipping the fuse for a few minutes. I guess I should have been suspicious at that point, but I figured maybe I had overheated something. But this time, the problem has not corrected itself. The Whirlpool representative that I spoke to, while very polite and personable, only scheduled a service call that will cost me $89.95 PLUS parts and labor. I asked her if other people had reported this same problem, since it had happened to me several times. She told me NO. I decided to do some research myself (yes, I know; I should have done this BEFORE I spent $578 on a worthless product) and found that many others have had the same problem, and that this is obviously a defect in the design of this unit. Unfortunately, I purchased the entire Whirlpool package because of a special rebate available at the time. Now, I am wondering if my other appliances will begin to break down in the near future. After reading about the experiences of others, I am calling to cancel the service visit. I will be removing the microwave from my kitchen and purchasing a new one. Whirlpool has lost a customer. I will NEVER purchase a Whirlpool product again.

A few months ago our Whirlpool microwave just completely died. We had only been in our brand new home for about 18 months at the time, so I was very disappointed. I would have bought a different brand at that time, but didnt want it to look ridiculous, as it is mounted in the cabinet above the Whirlpool oven I was shocked to get a text from my wife a couple days ago, saying the same thing had happened to our oven. I thought that it must be a circuit breaker. My parents had Whirlpool appliances in my home growing up and we never had a problem with our oven. Well... I was wrong not a circuit breaker. The thing is just dead. Nice... Thanks Whirlpool! Thanks Century Communities for installing the absolute cheapest products in my home! Wonder what will be next? Probably the range top... Ill let you know.

One month ago the freezer quit working. Lowes sent out a repairman who told us it would cost over $1000 to fix. This fridge is only 18 months old. I called Lowes and the Whirlpool and they offered to supply the parts. Repairman came out yesterday and said the refrigerator cant be fixed. Am now waiting for Whirlpool to call us back and tell us what recourse we have. Very disappointed. Fridge is now sitting unplugged in my kitchen. Will never buy another Whirlpool product again. If there are so many issues, there should have been a recall on these items!

This washer is 5 years old and the top is rusting out on the inner rim. I have city water that has been tested and found to be totally safe to use and drink. Neighbors using the same water and owning different brand washers have no rust problems. Does anyone else have the same problem with their Cabrio washer?

I have Whirlpool Gold washer and dryer and microwave. All handles and grills and trays have broken. What a disappointment ! Their top of the line? We, at this house, will always avoid buying anything from crap pool gold!! Its a disgrace the way they make these things. And the support sucks!

I bought my Whirlpool Cabrio Washing Machine in 2010. I hate it 100%. I have never used bleach in the machine. I use liquid detergent only. 2 things happen every day: #1: When I wash a load of colors, I take them out when complete and there is dry white powder like substance over the black clothes. It looks dirty but it just got washed. #2 About once a week, I will pull something out of the washer and there is a bleach spot on it. The last item that this happened to was a $200 sweater. It went in the garbage. This should never of happened with an $800 washing machine.

I had this same refrigerator in another home and had no issues, this particular one now I have nothing but issues with it. It seems that the quality is not consistent. First the ice maker was not working, then the freezer light burned out and now there is extensive frost build up in the freezer. The refrigerator is only 2 years old!

First whirlpool 3 door with ice maker in door failed in less than a year. Took 6 months to resolve issue, several service calls, at least 30 calls to Lowes and Whirlpool with little or no response. Nobody wanted to take responsibility to do something about my broken fridge. Even the authorized repair guy didnt want to touch it, didnt want to ruin his reputation because they wont stay fixed. Another service guy wanted to take it to the shop to repair, of course I would be responsible for pickup and delivery charge. Found out the repair was an in home repair, so didnt use that guy, I felt like he was trying to rip me off.I finally got to the right people in whirlpool organization and they replaced the fridge, that took another two weeks. I found everything takes two weeks. The replacement was supposed to be same model with upgrade, this is gold series fridge Ive been talking about. New fridge has failed also, seems like same symptoms. It lasted 1 yr and 4 or 5 months. I guess not too bad for a top of the line refrigerator, made by Whirlpool. Gonna give them a chance to make it right or I am considering hauling it around in my truck with a sign on it. Not trying to punish the distributor, just Whirlpool. This product is so bad the government should step in and force Whirlpool to give money back.

I just bought a brand new Sterling steel refrigerator not even 2 months ago, and since I got it, noticed rusty spots coming out,and now has spread all over. I called customer care, and they said it wasnt cover under the guarantee,and to buy a special spray out of my pocket expensive to remove the rust. I am Very disappointed with the service I received, for its not even 2 months old refrigerator and it looks like it is old now. In addition, the company didnt offer to send someone to take a look, checking and make sure theres no future problems with my new purchase, and as a courtesy removing the rust free of charge.

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

Purchased a G16SDRXX07 three door Whirlpool refrigerator two years ago. Ever since new, when there is a very short power glitch the refrigerator shuts down and will not re-start without manual intervention. This happened at two months. Whirlpool replaced the boards. Still does it. Also when this happens the water dispenser will no longer dispense continuous water. It stops after three ounces. Now they want to charge me for a service call and parts to correct a problem that is obviously built into the unit. There should be a recall on this. Whirlpool should correct the problem free of charge as it is obviously an electronic design issue. Upgrade the necessary control board and replace it. If not, after being a loyal Whirlpool customer for 42 years, we will replace this unit with a different brand that Whirlpool does not build.

I purchased a Whirlpool 3 years ago. It was on the lower end for price so my expectations were not that high. It does an average job cleaning dishes so for the price I could give it 4/5. The pump and motor just went and had to be replaced. Almost the same cost as replacing the whole machine. The repair technician that did the work stated that this was a very common problem with Whirlpool in recent years. Of course this is not covered by warranty. So if you purchase a Whirlpool realize you are rolling the dice.

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

After having our refrigerator for a few months we noticed rust on every stainless steel panel on the front of the unit (6). After customer service sent a technician to look at the unit nothing more was done. I was just told to try and scrub the rust off.