Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

I bought my Whirlpool Cabrio Washing Machine in 2010. I hate it 100%. I have never used bleach in the machine. I use liquid detergent only. 2 things happen every day: #1: When I wash a load of colors, I take them out when complete and there is dry white powder like substance over the black clothes. It looks dirty but it just got washed. #2 About once a week, I will pull something out of the washer and there is a bleach spot on it. The last item that this happened to was a $200 sweater. It went in the garbage. This should never of happened with an $800 washing machine.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

I bought this Whirlpool Cabrio Washer 3 years ago. Yesterday will be my last repair. I installed a new tub (bearing failed have to buy a full tub to replace), new suspension rods and a new stator and rotor (cracked). Last year I replaced a drain pump twice, and a computer board. All of these repairs since I purchased this washer have cost me well over $900 for a $1400 machine. I dont mind replacing a pump every few years but these larger failures are unacceptable. We have moved back to Kenmore on some new appliances we purchased this year as result of trouble with Whirlpool. Whirlpool should send out a recall on the suspension rods; the existing ones seize at the top and stop functioning causing the tub to shake excessively. This led to the cracked motor (rotor cracked).

Purchased suite of appliances. 2 years later front burner will only operate on high (fire hazard). Fridge icemaker in door has never worked properly. No ice or shooting everywhere. Whirlpool offers no help because did not purchase pricey warranty & are nasty. Food freezes inside fridge & its my fault. Never Never buy whirlpool or any of their products KitchenAid Jenn-Air. There is a whole list!! They say made in USA. LIE. They are assembled in USA. Everything else is outsourced. No integrity from this company & definitely do not stand behind their products. Customer Service is non existent!

I purchased a washer from Whirlpool through Home Depot on August 7, 2014 and on Dec 31st, 2014 the washer broke. I called Home Depot and was told to call Whirlpool since I was still under a year warranty. After numerous calls I was referred to Advantage |Appliances, a company that provides repair services for Whirlpool. After a week the technician showed up and briefly inspects the machine to conclude that there were two problems with the machine: The controller is defective and there might be another problem since the water is not draining. An order was placed for the part and another week went by with still no part. I called the corporate office only to hear that it might take 5 to 7 days to receive it. In the meantime I had laundry piling up. I was forced to go to the laundromat with one arm in a cast and a painful lower back. I finally received the part on Friday and the technician arrived on Saturday to install the part and then announces that she was willing to fix the water pump but had to get paid in cash since this was not included in the warranty. Now mind you! This woman knew about the problem from her last visit but made believe that it wasnt a problem. Advantage Appliance makes money by extorting their customers out of money. This young lady stood there without blinking asking me to pay her $89.50 to do the job she was suppose to do in the first place. I purchased an extended warranty from Home Depot only to find out that they would not be able to do anything since I was still under warranty. I have never been so angry and want Whirlpool to take responsibility. I am sitting with a washer half full with water and no one is stepping up to do something! Whirlpool is disgusting! The corporate office was not friendly or nice about this situation. They dont care! Why do businesses like Whirlpool get away with this? This is not acceptable.

This oven/range (W10665261B) has a cleaning feature that DOES NOT WORK! Do not buy unless you want to hand scrub the oven without any cleaning products. No one at the company cares. I will discard the oven.

In the past 8 years, I have had to replace 2 Whirlpool Calypso washing machines and 1 Cabrio washing machine. All 3 washing machines worked great for the first 2 years. I purchased the Whirlpool extended warranty on all 3 washers. The first Calypso had 12 repairs done on it. Finally A&E repair service deemed the washer not repairable. Whirlpool replaced the Calypso with a new Calypso. Based on the problems with the first one, I again, purchased the extended warranty. Again, after the manufacturers warranty expired, I again had issues. After numerous repairs, A&E deemed the washer unrepairable. I contacted Whirpool warranty service and was told that they would reimburse me 75% of the cost of their choice of a Whirlpool washer! Since I have had 10 hand surgeries, I need a washer that does not have an agitator (hence the original Calypso purchase). The model that Whirpool warranty deemed as a replacement had an agitator and was also a much lower energy efficiency rating. I found that the Cabrio was a comparable replacement model and finally Whirlpool agreed to replace the washer at 75%. I was angry that they didnt cover the total replacement, but felt at least I got a totally new problem-free washer. I again purchased the extended warranty. I got the Cabrio in March of 2008. In April of 2011, the washer started getting rust around the bleach dispenser and also I would get UL code (Uneven Load). A&E tech came out and replaced a bearing. He said that the rust was not covered under the warranty. I asked how it was okay to have rust around the bleach dispenser if the washing machine is always wet with water. A month later, I was still having a UL code and the rust was getting worse. A&E came out again and said that even though I saw rust around the bleach dispenser, the rust was in fact underneath the tub and had eaten away at the parts. He called the warranty company to authorize repairs and the Whirlpool warranty company denied any more repairs on the washing machine.

We purchased a new home 6 weeks ago that was furnished with new Whirlpool appliances. The stove worked great however the oven never worked at any time. The appliance sales person advised that we had to go through Whirlpool for repair on a brand new appliance. To date we have had to stay home 2 days and the range is still not working and third service call is now scheduled. A call to Whirlpool ended with them advising that we do not qualify for a replacement range, even though it never worked. We have been without an oven for 6 weeks now which is totally unacceptable. I would never buy another Whirlpool product or recommend them based on this current experience. We paid for a new product that never worked and they will not replace it. Hopefully they can repair it on the third visit. Unfortunately I have lost faith in this product and this company.

I purchased my refrigerator four years ago from Lowes. From the second year ice would form in the bottom of the freezer weekly. This past week it stopped working totally. I had to call a repairman. He advised me the parts he had to replace were outdated and Whirlpool had made changes to the my refrigerator model two years ago. No recall. Just cheap parts that caused the refrigerator to not defrost. $400 later all is well and I am broke. I wrote to Whirlpool and their response was, Oh well, there was never a recall so youre SOL.

I have gallon Whirlpool hot water heater. After 2 1/2 years, the heater started indicating upper sensor failure. I have had servicemen out here every 3-4 weeks since June. I have replaced gas valves, a new sensor and a new gas meter. I have made several calls to Whirlpool, but cant keep this hot water heater going. I am going to have to find a new heater.

We bought a Whirlpool side by side at the end of August 2017. In March of 2018 - the day after I got the letter about extending my warranty - they had to replace the diffuser - it was making a horrid noise and freezing my eggs and milk. This part went again in July. I insisted they extend my warranty which they did - until March 2019. The part went again in November. I again demanded an extension - now it is guaranteed until June 2019. I asked about replacement and was told that as long as it was reparable they would not replace it. This part is dying every four months. The first few times I called, the hold recording touted a repair app - that did not give me much confidence in the company.

I installed my new water heater in 2012. Within 3 months, it was not producing hot water. When I called, a helpful person at the Whirlpool warranty line told me it was because there was too much cold water being mixed into the hot water coming from the tank. I hung up... Called again and was told that they would be able to get someone in 2 weeks out to my house to check it. I told them that was not acceptable. I hung up... I called Lowes, where I bought it. The person on the other line finally, after more than 1 hour, was able to get a repair person out there within 2 days. I had to pay the fee to have the guy come look at my hot water tank, and tell me that he hated Whirlpools. He called Whirlpool, 3 times; he was hung up on 2 times. He explained what had happened was I had a hot water leak, that it probably it was overloaded, the thermostat control everything else was fine. However, that I had installed the heater myself not a professional. Therefore it was not up to NATIONAL code; therefore, Whirlpool refused to honor the warranty. So, short version, in order to get the tank repaired, I was supposed to spend an additional $300-$400 to bring the heater up to code for them to honor the warranty. What you ask made my heater out of code? It is outside in my utility room, and the flue was cut to fit and the OUTSIDE vent pipe was not above the roofline. It didnt matter that it is not in an enclosed space, that this was nothing to do with the reasoning the thermocouple went out.I simply turned up the heat, so far so good. Will I ever buy another Whirlpool? No. I have a Whirlpool fridge bought before the hot water tank situation. The ice maker went out within 6 months of purchase. When I called to have it repaired, the service guy stated he hates Whirlpool. The piece he had to replace was plastic that was replaced with a metal piece that should have been metal to begin with.

So I have had the washer for a few years - bought it new or at least I thought. First came a clunking noise - fixed that. Next came the F1 code and installed a new pump $90 plus dollars. After installation, Im still getting F1 code and am now being told it is the ERC control board or water inlet valve either way a guessing game which in the end will have cost me over $400 to fix myself. I wish companies like this would stand behind their merchandise.

I bought a Whirlpool washer and drying matching set (model 6400sw3). I liked it because it was extra large without agitator in the middle. Ive had it for about 2-3 years and I have already replaced the drain pump, motor and barrens, it has cost me over 500.00. I thought now OK its working fine, but now its giving me a code every time I wash of LD. I am so fed up with this!! I should have bought a new washer but I felt as much as I put into it, I basically built a new one. And now this code comes up every time and I have to power it off. Im not sure if anyone else has had this problem but I just dont know what else could go wrong with this. I will never ever buy a piece of junk like this again!!

My glass stove top broke for the second time. The first time Whirlpool accused me of dropping something on it and chipping it. I didnt but paid the $400 glass replacement. Today while cooking, I put cold from the fridge not freezer, sausage into a warming fry pan. I heard the same pop I heard 2 years previously...sure enough the glass stove top broke. After a phone call to whirlpool, and hearing they were sorry but theres nothing they can do, I will write as many letters I can so others dont buy whirlpool.

I purchased a Whirlpool Cabrio washing machine April 2016. I was so excited to have a new washing machine. I thought the 1st couple times I used it I just didnt have settings right. It uses so little water it doesnt get all clothes wet. If they are not wet they cant be clean. So I started doing very small loads. Then clothes were not clean. They stink. So I have tried every detergent out there. Nothing helps. Another thing it takes an hour or longer per wash to get not so dirty clothes. Not to mention it puts holes in my towels. I tried reaching out to Lowes where we bought it only less than 4 months ago only to be told they would contact Whirlpool. Whirlpool wanted to send tech that I would have to pay for just to tell me that the piece of crap washing machine is doing everything the manufacturer made it to do. I told him I was not going to pay so. I think with all the problems people there should be a class action lawsuit. DO NOT BUY CABRIO!!!

I will keep this brief because many of our issues on our 18-month-old washer are in other reviews. The anger I feel towards Whirlpool Customer Service and the logic they use in providing repairs on a “goodwill” basis are unbelievable. After a Whirlpool certified appliance repair person diagnosed our fairly new washer as requiring the entire guts to be replaced... transmission, bucket, etc., we were told the repair bill would be over $1,300! Are you kidding me... the washer only cost in the mid $500 range, and now Whirlpool is going to do us a big favor and cover that outrageous bill! I told the customer service supervisor to please give us a new washer and take away our broken washer and use it for parts (if there any good parts left in this miserable machine). His reply “thats not going to happen”. He used this phrase to us at least 20 times during our service call until I finally told him I thought his attitude was aggressive and demeaning. I refuse to be bullied by a major manufacturer for a substandard product.I can only warn you when considering Whirlpool (and every major appliance in our two homes are Whirlpool) that you should use due diligence in your selection. We paid extra to upgrade all our Whirlpool appliances in our homes and I will never make that mistake again. And don’t get me started on the white film that covers my dark clothes. They say I use too much detergent... not true. I am not stupid and understand the HE requirement to cut way back on soap.

I purchased a Whirlpool washing machine from PC Richards in Lake Grove 15 months ago. I paid $590.00. I had to call PC Richards back because it sounded like the machine was not spinning right. The servicemen came back and said nothing was wrong. It was supposed to sound like that. Now the machine stopped draining and spinning. I went to the store and they handed me customer service numbers and said they could not help me. I contacted Whirlpool online and received a phone call from a woman that gave me a lesson on how to load the machine and put soap in it! She was a very polite woman, but, gee, that didn’t solve my problem.After 4 days I was able to get through by phone and was told to call service. I contacted Mahler Appliance. He looked at it and said he couldn’t fix it and took a check for $81.47. He told me to call Whirlpool. I called Whirlpool again and got their service people. The gentleman came and could not figure out what was wrong. He tried a few things and said it was probably the main board. He said to call Whirlpool, but they most likely won’t give me back my money. He could charge me $460.00 for a new board per his supervisor. I just paid $590.00 for the machine and another $87.00 to some guy who took advantage. He left with an $87.00 check and I still have a broken washer. He did tighten up a loose wire he said he found and told me to try it and good luck. So I tried it. I put clothes in and turned it on.I came back about 20 minutes later to see if it continued to run and I slipped and fell on the ceramic floor because water drained out from somewhere and went all over my floor. I have injured my back and elbow from hitting the hard floor. I also have water all over the place and finally a very broken defective washer. I am angry. I hurt myself and have spent close to $1000.00 and I still have no working washer and no way to buy another one. The washer is 15 months old. That’s brand new to me. There was obviously a problem from the beginning. Whirlpool has always had a quality name for years. I would hope that they would stand by their product and fix my washer for me. It is obviously defective.

I bought a Whirlpool front loading washing machine 5 years ago, which has given me constant trouble. The computer on the machine is not working. When it is fixed, the machines makes extremely loud grinding noises and frequently the spinner does not work properly, leaving you with heavy sodden wet clothes. Whirlpools guarantee is very limited and customer service is unhelpful except to apologize for your horrible experience. You will have to pay for a technician to diagnose the problem. I will have to replace this costly machine after just 5 years of unreliable service. I would never buy a Whirlpool product again.

I purchased a Fridge/Freezer just over 4 years ago. It was an expensive one. The gas is gone and they cannot re-gas it. If I was told this when I was purchasing it I certainly would not have spent this money. I rang the concessional team. They would give me nothing towards a replacement as they had not one in stock, POOR Service for a big company. I am in business and this is not the way I would treat my customers. This has certainly turned me away from purchasing Whirlpool Products, despite having a industrial washing machine and Dryer. For the record, I had 2 servicemen to check it and they were most pleasant. It was beyond repair.

I purchased a Whirlpool Cabrio and a one year extended warranty two years ago. As soon as my warranty ended, my washer started to malfunction. I recently started to receive the F-51 code and the washer shuts down at the spin cycle. I am angry because I spent just under 1200 dollars on a washer a little bit over two years ago and now, it is sitting in my laundry room taking up space. When I called Whirlpool, they told me I could purchase another repair warranty for $316.94, which would take the cost over 1500 dollars for this washer and there was no empathy nor compassion for what I was feeling as a consumer from the customer service rep. I spent my hard-earned money on major appliance purchase and I think that it is only fair that I get more than a two year usage out of machine that was designed to last at least six years according to their website. There is no way that this should just be my lost and cost me additional funds.

DONT BUY WHIRLPOOL! I bought a Whirlpool refrigerator 5 years ago. In June I had to have a new thermostat put in because the refrigerator would not stay cold. The food in the freezer would defrost and then freeze, defrost and then freeze. I had to throw all of the food out. Two weeks ago the refrigerator was making a groaning noise so I looked in the freezer and the temperature was up to 30 degrees. The ice cream was soft, the bread and buns that I had in the freezer were defrosting and small things like crab cakes had also started to defrost. Eventually the temperature went back down to zero.So I called out the repairman AGAIN! He told me this is normal that the freezer goes up to 30 degrees to defrost the freezer and the groaning noise I heard had to do with the Freon. It cannot be normal for food to freeze, defrost and freeze again. I called their customer service and their representative, Jasmine, basically told me all she could do for me was to schedule a service call. Really? I just had the repairman out the day before. I am concerned about food safety with a refrigerator that fails to keep food at the proper temperature.

Cabrio washer Model # wtw5840bw - I purchased this washer one year ago. It has a defect that comes along with it. You think your clothes are getting clean. But in reality they are not. This washer does not fill enough water to wash a small load of clothes. It has ruined three large bags of my clothes. Stained they smell in general they are not clean. Worst washer I have ever bought. General public Please be aware of this issue if you are going to purchase this washer. It is a big expense to be put out to the curb.

I have a model ED20PK. The doors are rusting on the outside.This refrigerator was purchased by my husband who has passed, I do not have the receipt and I dont know where he purchased it. The refrigerator worked perfect. It has been in my kitchen from day of purchase. My home is adequately heated in winter and air conditioned in the summer. I have an up-scale home. I dont see any reason to replace the refrigerator, but I cannot stand the deteriorating condition of the doors.If I replace it, I will not buy a Whirlpool or any brand made by Whirlpool.The rust is not just a discoloration, it is actually rough to the touch and is getting worse day by day. If you have any answers or help I would appreciate a phone call. I am not really in an economic position to just go and buy a new refrigerator.

I am a retiree after 35 years and 5 months, the last 20 plus years on salary. I purchased a new Whirlpool washer on April 18, 2012 at Lowes in Tiffin, Ohio. The clerk said to take the receipt to Clyde to apply for my rebate. I was informed by a receptionist that we only get a rebate if our purchase is from Sears. I only went to Lowes because of the urgency and was not aware of this change in your policy. I consider this a real slap in the face after all the years of what I consider excellent service to Whirlpool Corporation.

Very disheartening to know that an established company such as Whirlpool does not stand behind their products or acknowledge known product defects. Based on the quantity of complaints logged on this site alone, Id think a recall would be required. Identical to other consumer posts within, we purchased the Cabrio Platinum washer/dryer set (WTW8000BW0). Exactly 24 months to the purchase date, jet planes began flying through our home with the noise concentrated in the laundry room. The dryer has been fine; however, the washer is a whole other issue. The bearings are shot (as many users have cited) and the noise is deafening... even with the laundry door closed, TV on high, dogs barking and flurry of activity in the kitchen! We made a switch to the Whirlpool brand 2yrs ago due to reputation and longevity. Ooops. Lesson learned and $700 out the window. Back to GEs. If youre reading this and concur with our review, just remember... customers always have a choice! Unfortunately, Whirlpool will figure this out the hard way. Just like other iconic brands... Smith-Corona, Blockbuster, Polaroid, Nokia, Saturn, Pontiac/Oldsmobile, Sony and many others. There is typically a reason a company offers tremendous sales incentives (price cut, rebate, special financing) to unload products. We found out why. Thanks for the memories Whirlpool!

Model WMH1164XWS-3 Microwave - I purchased a brand new home in 2012 with all stainless appliances, within 3-5 months the outside door handle where it attaches at top and bottom of microwave has chipped, so that the screws are shown. I havent had the time to look up the replacement part until just now. Very disappointed in the amount of money a handle only cost.

I have purchased Protton 3 door (Protton 20142, S.N **) fridge in Mar 2016 and since purchase of the fridge I have facing cooling issue. Its take around 24 hours to make ice. After sales service is also pathetic because after raised request the service person came about 6 or 7 days later, and he did not check anything and recommend me to go to the service center. I am not sure why Whirlpool kept this type service person and service. My concern is if Whirlpool is not ready to provide home service then should mentioned in service commitment we dont provide home service. I am using first time Whirlpool product and I realized Whirlpool product are very bad and service is also too bad. I strongly recommend to everyone please dont buy the Whirlpool product and I also want to know either Whirlpool will provide service or this fridge product is useless for me.

We bought our washer, dryer, stove, microwave, and dishwasher in September of 2010. In 3 years we have had to replace our Whirlpool over the stove venting microwave, have spent over $550.00 on repairs on the Whirlpool refrigerator, and now have to replace our Whirlpool Cabrio washer. This of course does not include our time, effort & frustrations, especially with Whirlpool customer service. Will NEVER buy Whirlpool again. Were all for a class action lawsuit.

Bought a Whirlpool hot water heater from Lowes 1/08/12. In May of 2013, it would not work. I had to replace the Gas Control for around $100.00. It was 4 months off warranty! The same thing happens 3/2014. They sent me a new Gas Control Valve free and shipped it overnight. This is no fun to fix. I cannot believe that I need to flush the tank out with cider vinegar every 6 months. That is why I was told it keeps breaking.

Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

My refrigerator is a side by side and its freezer compartment is small (width). Whirlpool is always my brand of choice for household appliances. I personally would not choose the side by side design again but I would choose Whirlpool.

Whirlpool Cabrio Platinum Washer - I have a 2 1/2 year old washer that has been serviced twice. This week 10/2/14 the service technician informed me that we had a bad tub bearing. The bearing failure caused a leak which corroded the rotor & stator. It was more cost effective to buy a new washer than to repair our unit!!!! Ive never heard of a washing machine needing to be totally replaced after 2 1/2 years. Any ideas how to deal with Whirlpool?

Purchased the Cabrio top loading washer and dryer. Huge mistake. The clothes come out of the washer a tangled wrinkle mess. Have tried different cycles and water levels to no avail. Dark clothes have detergent streaks and lint. The dryer has a steam refresh cycle which Ive used to try and remove some of the wrinkles caused to no avail. Clothes come out with water spots. Ive only owned this dual for about 6 months. Take my advice and DO NOT PURCHASE!!!

Extremely unsatisfied with their customer care. I purchased a washer and dryer 18 months ago and did not choose to purchase an extended warranty. I currently need a main control board replaced after the machine stopped spinning and draining. I hired a wonderful handyman, who originally suspected the lid--locking mechanism was the problem. When that was replaced and the machine still wasnt functioning, he determined the main control board needed replacing. This is a manufacturer defect and costs approximately $300 for the part, not including labor. Of course, my machine is no longer covered under the extremely limited manufacturers warranty that only lasts for 12 months, so I am stuck picking up the bill. Once done with all the parts and labor, its cheaper to buy a new washing machine especially because they still wont add a warranty to it after its fixed. I think its absurd that a manufacturers defect isnt continually covered under warranty no matter how old the machine is. Customer service continued to tell me I should have wasted more money on a company that doesnt care about customer satisfaction and purchased an extended warranty originally. Horrible investment! Will never purchase Whirlpool appliances ever again!

Purchased this washer in 2009 from Lowes, believing the hype that it was efficient. Since we only needed a Washer at the time, we overpaid (it is more cost effective when you buy both washer and dryer). So we paid $1000.00 for this machine (we purchased the stand as well). After the 1st year, there seemed to be a significant decrease in how fast the washer spun, as the clothes were coming out wetter. I didnt pay much attention, but 2 years later, the machine has a weird problem where it couldnt complete the cycle, and by this time, every time it Spun, the noise was louder and louder.I contact Whirlpool, placed a service call and the Technician came out. $225.00 later, there was a hose that was pinched that was sending a wrong signal to the washer. He fixed that and told me I should get a contract on the machine through Whirlpool since I seemed to be having problems. I purchased the contract, for $300.00, and 2 1/2 weeks later placed another service call, as the noise from the machine was happening every time I did laundry. The service guy came out, indicated that it seemed to be the Agitator, and that he would need to order parts, and that they had a SPECIALIST who only does this type of repair, since they have many! He also indicated that the hose may have crimped due to the movement of the entire agitator!Well, after not hearing from ANYONE for 2 weeks, I called the repair company who told me WHIRLPOOL was supposed to call and let me know that they would NOT fix the machine, as the parts cost more than the Washer, which is now valued at $500.00! No one from WHIRLPOOL EVER CALLED, and I cant understand how a $1000.00 Washing machine touted to be so efficient and environmentally friendly has been THROWN OUT after 3 years!!! And now I am out the $225.00 repair, have no washing machine, $1000.00 down the drain (and I forgot to mention a year later we bought the matching WHIRLPOOL DRYER and OVERPAID) and now have to purchase another machine, which I assure you WONT BE WHIRLPOOL! As most of us have experienced, WASHING MACHINES last for many years! The washer I had before this was over 20 years!!!! So much for efficient and environmentally friendly... The only thing GREEN about this machine is how much of my $$$ has gone to Whirlpool!

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

Two years ago, we purchased a Whirlpool Cabrio Washing Machine from Sears. All of a sudden, it was making sounds in the spin cycle that sounded like a jet airplane taking off. It was terribly loud. We called repair technician, which cost $90, only to find out that the bearing is gone and its going to cost over $500 to fix it. This is absolutely ridiculous! We expected it to last several years, only to find out that we would have to spend almost as much as the washer originally cost in order to fix it. We paid $700 for this machine, two years ago, and I can say that Ive never been more disappointed with a product in my life. My previous washer lasted thirteen years, not to mention my dryer and stove fifteen years, with minimal repairs. I will never buy another Whirlpool appliance again. I have read some other complaints on this consumer affairs website, as well as other sites, regarding this same washer with the same problem on the bearing and cost to repair. If anything, I think Whirlpool should make good on this product and offer something regarding a recall or payment for repair in some form. As far as Im concerned, I will alert everyone I know about Whirlpool appliances and advise them not to purchase it. Now, I either have to pay over $500 to repair my washer or go buy another one. I do not even want this Whirlpool appliance in my house when I can get a washer for cheaper than the cost to repair it.

I purchased this Whirlpool WTW7800XW2 washer expecting it to last many years. As a senior citizen, I spent well over $700 on this model because of its large capacity and water saving feature. It has been in service for just over two years and has had limited use. Last week the glass top popped up and I notice that it broke at the hinge. This is definitely a design flaw. The washer has a lock feature and with the broken top, it is useless. I called Whirlpool and the customer service rep said she could sell me a new $250.00 lid at a 25% discount. Looking online, I found that hundreds of consumers have this same problem. Whirlpool refuses to acknowledge the defect. The customer service rep indicated that I should have bought an extended warranty. This is my last Whirlpool appliance ever!

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

The dishwasher chopper blade broke, and the check valve is gone. My over-the-stove microwave handle came off in my hand, and the top cover for the fan fell off in a pan of hot grease and almost burned me. What the hell is wrong with this picture? I paid a lot of money for inferior products, and I cant find replacement parts anywhere. And they are expensive when you can find them.I have tried to get this resolved before I talked to a rep, and your computers were down. I will never buy another Whirlpool again, and I am spreading the word. Dont buy Whirlpool. I am thinking of posting this on Facebook.

Whirlpool cabrio wtw7800xwo - During the 12th month of the use of this washer, the lid broke. I called Whirlpool to schedule a repair on it. I got someone here to repair it, and it was 7 days over the 1 year warranty. I don’t think this is fair when they sent the repair guy out too late when I scheduled this right before the 1 year was up. I came about looking this up online, and I find I’m not the only one with a 1 year lid. My next washer will be a 1980s built to last. This was the worst $1,100 I ever spent. I had to choose 1 star. Wish it had a choice of - ★★★★★.

Ive got a brand new house, with brand new appliances by Whirlpool. Within less than 6 months, my dishwasher, Model no. DU1015XTXB0 Serial no. F00702058, had its electronic board gone bad. Instead of replacing the dishwasher, Whirlpool replaced the part. Not even one year later the same part went bad. Now, the dishwasher is not even 18 months old and it will cost $255.00 to repair. It is just the two of us in our home and I bought Cascade packets 20ct x 5 at Sams. Im not even done with the packets, so I know 100% that we have run the dishwasher just 70 cycles in 18 months.

Whirlpool has always been known for quality products. But the range I haves burners are failing. It is eight years old. Think it should last longer than that. The oven works good, but the temperature varies as well. Lower oven door is designed bad, because grease gets trapped between the two glass doors and cant be cleaned.

My new Washing machine was to be energy efficient. Yes, It uses less water to wash a load of clothes. Problem is, it takes twice as long to wash a load of clothes as older models. If it uses twice as much electricity, In what universe can this be considered energy efficient?

The door handle is cracking on my Whirlpool microwave. This is a poor experience with Sears. My original door was smoked up from a kitchen fire. I replaced the door and handle in June. My boyfriend does all the cooking, so I did not notice the handle until November. It is cracking on the side. We contacted Sears, and they said it was past the warranty. This problem is due to a defective product. I have seen several similar complaints online.

I purchased a three door Whirlpool refrigerator in August of 2014. Today I am having it repaired for the third time, each time for a different reason. I either bought a lemon or Whirlpool products have really gone downhill. Either way I will never again purchase a Whirlpool product. Between the cost of the repairs and lost food, I am debating about dumping it and buying a new refrigerator.

When I purchased my Whirlpool Cabrio washer and dry, I was told by the sales associate that this was the top of the line. I paid a higher price for what I thought was quality only to find out that this washing machine (WTW6600SW2) Serial number CU2973872 is in fact poor quality, made of components that are cheap, unreliable and made to last only as long as the initial warranty. Prior to buying Whirlpool, I owned Kenmore and had a washer and dry that raised four kids, now I own a Top of the line Cabrio that cant wash the clothes of two adults. I think it is funny that two days after the washer started sounding like a jet plane taking off during the spin cycle, I received your sign up for an extended warranty letter. Then I take the washer apart to locate the trouble and find it is a single bearing on the top of the drive shaft, but can I buy the bearing and replace it? No, I have to buy the entire outer tub and drive shaft. So a $10.00 bearing will now cost me $200.00. I am sure that helps your profit margins considering all you have to do is a search for Cabrio problems to find 350,000 hits, or to ask a professional technician and receive the reply that they are replacing 2-3 of these tub and drive shafts per week. I would recommend that Whirlpool tell its shareholders that you have compromised customer satisfaction to line their pockets with profits. If that was your intent then you have succeeded, however you need to also tell them to sell their shares now as you will have no return customers. Most corporations have core values that deal with safety first and then always followed by quality. I can say with confidence that your quality can be nowhere near the top five with this many problems with your top of the line product.

I am so thankful that there are others who are having the same problems with their washers. Since 2006, my husband and I have had words regarding who is not loading the washer right, why are the clothes still dirty, and why does the dryer have so much lint. The excessive amount of lint ruined my dryer. I get UL codes all the time! Before the UL flashes, it sounds like someones trying to break in. It is 2011. Despite the problems, it has not died yet. I am selling it and will never purchase another from them again. I have the dryer and it went out 2 years ago. It has problems with the motor. You can guess I did not buy a Whirlpool.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

AquaLift cleaning system does not work. My oven was barely dirty and I had to scrub with the special sponge to remove baked on food after I did the cleaning system twice! Rust is also showing up on the drawer which they refuse to repair because it is ONLY COSMETIC! Stove is 16 months old.

The unit hasnt given me any trouble over the two (2) years we have used it. The bottom freezer works well and was a concern when buying, but has worked out well and convenient, but you must keep the refrigerant coils clean.

I paid big bucks for a five burner, convection stove. I had a pot of boiling water on and the steam melted the plastic cover over the controls. Whirlpool said I had to buy the whole electronic panel. Close to $175.00!

We bought a small refrigerator/freezer Model WRT112CZJZ for a guest house. When not in use it was turned off at the unit control panel with the doors left open. There was a power failure and when the power was restored the refrigerator turned itself back on. Needless to say it must have been running for 2 weeks with the doors open and the condensation filled the holding tank and then proceeded to overflow on the wood floor. The floor was ruined. There was no indication in the manual to warn of the unit restarting when power is restored so it must be unplugged or the circuit breaker turned off to avoid a similar problem.

The Whirlpool microwave has been very reliable and efficient. I like its multiple functions, from heating up leftovers to defrosting meat and poultry, baking potatoes. All the functions are easy to use.

We purchased the Cabrio washer and dryer set 2 years ago (7/22/15) from Lowes and have HATED them since day one. The first wash in the washing machine left clothes dirtier than when they went in. Our clothes have never gotten truly clean. The washer has a HUGE tub which is what I liked about it so I can wash my King sized comforters. What a joke that turned out to be. The comforters only get half wet even on the deep water setting. The machine even left dark stains on my light colored comforter and ruined it. Fast forward to 2 years later and the washing machine stops spinning and fills with water clear up to the top of the tub and wont drain. I had to put the machine on the rinse and spin option to get it to drain. Tried a different setting and it worked for a few months but started doing the same thing. The washer seems to be unbalanced no matter what size load I do. I am thoroughly disgusted with this machine and wish I would have never purchased from Whirlpool. The dryer has always worked fine until recently (2 years after purchase). It quit drying the clothes and leaves everything twisted up and wrinkled, even if I take them out of the washer and shake them out before I put them in the dryer. Doesnt matter what setting I put it on, the result is the same. So now it seems as though BOTH of my machines only lasted 2 years. Im not going to bother fixing them, these will be used as target practice. I will never buy another Whirlpool product again.

I bought a Whirlpool over the range microwave in 2015, after about 6 months in I noticed that the microwave door was starting to crack. I thought maybe I bought a cracked one. About a year in the microwave is cracked. Pieces of the microwave are starting to fall on the food I am cooking. The last straw was when my 4-year-old was gagging and then choking on a piece of the plastic that fell from my microwave.

Purchased a Whirlpool Cabrio 4 years ago. It worked fine until last October when I had to call a Repair Service as all the Digital Controls would not work. It was the Digital Board had to be replaced at a cost of $ 315.00. That was October 2016 and in October of this year 2017 it started doing the same thing again. I call the Repair Service and they told me not to waste any more money on this machine as it is a piece of junk. I guess he was right as when I read all the bad reviews it got today, I realize I will be better off to buy another machine. It will not be a Whirlpool product. I purchased a Sears Kenmore Washer & Dryer back in 1995 and the washer lasted 20 years and I still have the dryer. This is what you refer to as a good product.

My husband and I have been loyal Whirlpool consumers for over thirty years. When it came time to purchase a new refrigerator, we purchased the GC3SHAXVY00 model. It was quite expensive but we decided to splurge. This was the worst mistake. Let me also state that we have had the refrigerator now for maybe 5 years. Within the first 6 months, the door that is the central operating system for the appliance went out. The appliance was still under warranty at that time, so Whirlpool ordered a new door. The technician replaced the door and left. However, within 15 minutes of the new door being replaced, the entire refrigerator began to shut down, not just the freezer. Fortunately, we had the techs cell and we called him and he came back and put the old door on until he could order another new door. That made three doors in the first 6 months of us owning the appliance. Then, the ice maker started freezing up. We were told just to defrost the ice maker once a month, that this was a problem the company was experiencing with this 500-dollar refrigerator. Then, the water line started freezing so we would have to leave the freezer door open for about half an hour every week to get the line to thaw so that we could get the water to come out of the dispenser. Now, the ice maker has quit completely. Are we going to call a whirlpool tech? NO, what for?This refrigerator has been a true lemon from day one. I have three more Whirlpool appliances that have broken down within 6 weeks of purchasing them. It was time to replace our appliances so we thought we would support our local economy by purchasing Whirlpool. To say the least, that will never happen again. I will be replacing all my appliances with LG from this day forward.

We purchased a new Cabrio top loading washer in June of 2011 to replace a Maytag Neptune (thinking at the time that wed gone as low as possible). We didnt abuse the machine. In fact, because it had a tempered glass lid (in a plastic frame), we were careful with the lid on the machine. It broke during a wash cycle. Because its heavy, the lid has spring supports on both sides; these are stronger than the plastic frame and over time the frame will break, rendering the machine inoperable. The discounted price for a new lid is over $200, and Maytag (I mean Whirlpool) tells us that it lasted through the 365 day warranty, so the bill is on us. It may be green when it works, but taking 18 month appliances to the landfill is not very green. And others on the web report say that the lid only lasts a year or so. The ratings scale needs to have negative values. Id give this appliance a -5.

Purchased Whirlpool side by side June 2010. Within a few months realized major problem with ice maker. Reservoir on door would leak and freeze inside the door. Service man out at least twice, advised to maintain service contract as would continue to have issues. It still leaks, freezes up and does not dispense properly. Now the inside liner of the refrigerator is cracking and neither the warranty company nor the WHIRLPOOL Manufacture Co. will stand by their product. It is my intent to warn as many people as possible, so they will not have the same bad experiences.

I really like the microwave. It performs all the preset functions very well. I’m not that thrilled with the refrigerator and dishwasher though. I do live in an apartment and I’m sure they are cheaper models of these appliances.

In May of 2010, my husband and I purchased a Cabrio washing machine. By the fall of 2010, I had put in a call to Whirlpool due to the washing machine chewing holes into clothing and not cleaning the clothes. Some of the clothes would come out of the washing machine with dry spots on them. Whirlpool sent out two different servicemen and even though one of them replaced the agitator we have still had problems with it. One of the servicemen even tried to tell me it wasnt the machine but it was my detergent (I use HE Purex dye free). I was told by a service rep at Whirlpool that there was nothing more they could do and I would just have to deal with it. I understand that products go faulty but with good customer service these issues could be resolved. Whirlpool obviously has little regard for their customers. I have contacted the Better Business Bureau. Hopefully they can get results.

I purchased a new Whirlpool range and had it fitted for propane. I used the stove daily and within two weeks, the temperature started fluctuated constantly. Several things I tried to cook ended up burned. I called Whirlpool to ask them for a possible solution. They wanted to send a repair person. I live on an island and knew it would take forever to get someone here. My appliance person said it could be only two things - the temperature probe or the computer board. I purchased both things and had them shipped to my address at my expense. It cost $257.00 to get the items. My appliance man on the island installed the two new items. I was hoping that would fix the problem. I am sad to say it did not! The oven still fluctuates wildly. I set the temp for 350 degrees and it shoots up to 450 degrees. I turn the temp down to 325 and it settles in at 350 for a period of time. Then, without any warning, it will shoot back up to 500 degrees. I have to open the door and let the temp back down to 350. This is how I have to bake and cook with this disaster. Wish I never purchased a Whirlpool appliance!

Purchased a G16SDRXX07 three door Whirlpool refrigerator two years ago. Ever since new, when there is a very short power glitch the refrigerator shuts down and will not re-start without manual intervention. This happened at two months. Whirlpool replaced the boards. Still does it. Also when this happens the water dispenser will no longer dispense continuous water. It stops after three ounces. Now they want to charge me for a service call and parts to correct a problem that is obviously built into the unit. There should be a recall on this. Whirlpool should correct the problem free of charge as it is obviously an electronic design issue. Upgrade the necessary control board and replace it. If not, after being a loyal Whirlpool customer for 42 years, we will replace this unit with a different brand that Whirlpool does not build.

Model WTW4850OXQO. Purchased this washer in Nov. 2011. Two months ago the washer began making a loud grinding noise in the wash cycle, so loud it can be heard throughout the house. Called the dealer whose serviceman said it was the gearbox and it would need to be replaced. Cost of the gearbox $235.00 plus $165.00 service. Called Whirlpool in TN and was told that I didnt purchase their 1 yr warranty. What the hell is a 1 year warranty but me paying Whirlpool to fix their defective piece of crap in case it breaks in the 1st year. I owned a Kenmore that lasted 11 years, an RCA that lasted 12 years, and a Maytag that lasted 10 years. Never a problem til they died of old age. This piece of ** is breaking down after 3 1/2 years. NEVER buy Whirlpool! Also, the inside of the machine SMELLS. My wife has to use bleach or cleanser to get the smell out. Once again a company in the USA thats too big to care about its customers!

I purchased a brand-new, $4600 36 gas range online. They finally installed all appliances by 10:30 pm last Friday, July 8, 2011. On Saturday, July 9, 2011, I woke at 2 am to weird smell (gas). I opened all the windows and went back to bed not sure since we never had gas before. Gas company came out that day and determined that the burners were bypassing gas. Jenn-Air said it was normal for some gas to come out and that they have sent the repair technician out three times to not find any leaks. The gas company red-tagged the stove saying it was hazardous. Jenn-Air has terrible customer service. I was on the phone Monday to Friday this week, every day talking with safety managers to supervisors with no results. This will be the LAST Jenn-Air purchase EVER!

I bought the french door refrigerator Sept 2014. Recently the change filter light came on so I bought the filter. I read the instructions and then when I went to install it, the filter door would only open about 10%. I called Whirlpool and explained it was obviously a manufacturing error. They didnt care. Out of warranty. Everyone can make a mistake but when you wont own up to it and take care of it, that defines your character or lack of it. I think I will video the whole thing and put it on YouTube.

My wife and I purchased a Whirlpool Duet washer and dryer 5 years 1 month ago. We purchased the front load style because they were supposed to be better made than the older style. Its just my wife and I no kids. We never overload the washer or dryer. Now the drum bearings in the washer have gone out. I feel that a washer should last longer than 5 years and 1 month. I dont think I will be buying another Whirlpool.

Cabrio washer 2015 model - The worst washer in 40 years. Everytime I use it I ask myself why did you buy this? Sure it conserves the amount of water but I havent noticed a nickel in savings because you have to wash the same load a couple of times. Since the days of cleaning in a stream clothes have been beaten to remove soil. How in gods name was I fooled into thinking this washer would actually clean our clothes. I put a folded tablecloth in it and when I emptied it the tablecloth was still folded. IF YOU NEED A CLOTHES WASHER TO ACTUALLY CLEAN CLOTHES, DONT BUY THE KIND WITHOUT AN AGITATOR. (serial # C52242825)

GX5FHDXVY04 French door fridge. Ice maker backup issue - which cause water to build up and leak out of fridge. Fix was a known issue with a rubber grommet - $100.00. Fridge stopped blowing cold air - control board - $293. Fridge stopped blowing cold air again! Getting Nowhere with Customer service... Whirlpool used to be a great brand. They have lost me as a customer, and by the looks of this board, Facebook page, I am not alone!

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

I purchased a Whirlpool Refrigerator with French Doors, Model No. GX5SHDXVD03. Within 1 year and 4 months, I had to replace the defrost control board. I spoke to Whirlpools customer service, George ** said he was sorry for my inconvenience but that he refuses to help in any way because I missed the warranty period by 4 months. I spent $352.74 for the parts and labor and lost hundreds more in food. Do not purchase any Whirlpool products. I was told that the boards have been going out frequently.

They stink. Major issues with most all of these Whirlpool water heaters. I have had issues with 3 different units. I own properties and these are pure junk. Cant find parts and have to pay for shipping on warranty parts! 2 years old units junked, Ridiculous... never buy Whirlpool!

What can I say. Pretty much a generic refrigerator that is manufactured and sold under various brand names. Nothing special. Keeps food cold. Ice maker takes too much freezer space but thats typical. Interior LED lights failed after a few months. Flicker sometimes. Out other times. Internet research finds this to be a common problem. Zero quality in Whirlpool appliances. I bought four Whirlpool kitchen appliances and ALL have had problems. The only way to own them is with a 5 year extended warranty.

I completely forgot that I wrote a review on our Whirlpool hot water heater model FG1H5040T3 Nov in 2010 until I received an email telling me how many people read my post. Surprise, Surprise guess what we are having problems with again. You know how nice it is to have hot water anytime you need or want it. Well, not at my house. The hot water heater worked for about a year (Im probably being nice with the time here). Heres our problem now, once the water heats up the pilot goes out. It will not stay on. Ive noticed that if its full the pilot light will not come on, so we have to run some water to be able to light it. Well I called customer service, a waste of time. The guy told me that my heaters warranty expired last year and his suggestion is to go buy another heater. REALLY! All I wanted to do was order a part for it. He did send me an article with suggestion of things to check. Sorry, we already did everything in the article, another waste of time. It seems we are not the only ones (model #) with problems with Whirlpool. Whirlpool used to make good products but its not anymore. I will NEVER buy another Whirlpool product again.

I bought my Whirlpool gas stovetop in March of 2016. The burner knobs that connect to the stove is made of plastic and all 5 knobs broke within the first year. Each year I have replaced knobs and had issues with the knob breaking and then not being able to tell if the gas is off or on. I have called and talked to people at Whirlpool about this issue several times. Although they seemed concerned they will not replace the knobs and I have had to purchase them through Whirlpool. The gas stovetop obviously has a serious and extremely dangerous design flaw. I have kept some of the broken knobs just to tell others about this terrifying flaw. Again, last night the gas was on for several hours before we discovered it!! I called Whirlpool again and they were unconcerned. The Model is #WCG97US0DS00, Serial#D60509297. Beware and DO NOT PURCHASE this gas stovetop. I wish I had not bought mine.

I Wish I had reviewed this refrigerator sooner. I bought a Whirlpool side by side refrigerator with ice and water dispenser in the door in 2016. Problem #1: Water leaks from the water dispenser and dribbles down the front of the door. I am as vigilant as I can be about wiping up the spills, but over time it has left a water stain. Stainless steel is not stainless! Problem #2: The freezer is too narrow. Too many frozen items that come packaged in boxes have to be wedged into it or stood on end. Problem #3: Ice cubes sometimes randomly drop out of the dispenser and melt on my hardwood floor. Problem #4: Even though the water is filtered, mineral deposits have built upon the well that collects the drips and I have yet to find any product that cleans it. It looks horrible and filthy. If Id had any idea how awful this appliance would look after just a couple of years, I would have been in contact with Whirlpool immediately.

I purchased a range and refrigerator from Whirlpool and have had nothing but problems with them ever since. Ive only had the range for years and (2) of the top burners are no longer working. Again, the refrigerator is only 5 years old and its handle has broken 5 times. I have needed to replace the handle every year that Ive owned the refrigerator. Whirlpool only offered a (1) years warranty for these faulty appliances and then immediately started to bug me about purchasing an extended warranty. I guess they knew that their junk would hold up, so they started pushing a warranty. Finally, their customer service while apologetic, are very robotic and appeared to have heard my complaint before. So, SAVE YOURSELF SOME AGGRAVATION AND PURCHASE ANOTHER BRAND. For if you dont heed my warning just know that youve been warned.

If I could give them zero stars I would. NEVER BUY A WHIRLPOOL GAS WATER HEATER! Our Whirlpool water heater Is 4 years old. Pilot light wont stay lit. A reputable plumber came out and said that the control knob is bad and to call Whirlpool to get part because its still under warranty. So I call and get nothing but a hassle. They tried to tell me that it was installed in a room that the installation manual says it not to be in. (Background here. The house was built in 1960. It is on a cement slab and its a prefab house.) The manual says Do not install in bathrooms, bedrooms or any OCCUPIED room normally kept closed. Now let me tell you where it is at. It is in a 5 by 3 boxed area with cement floor and walls to the ceiling with access doors to it and to the furnace which is also in this area. The access door to water heater is on the back side of a bedroom closet, access door to furnace is in a hall. So Whirlpool tells me that they cant give me the part Even if I pay for it due to some national fuel and gas code. They wont even tell me where I could buy the part... They said the only way they can help me is if I relocate the water heater or put in a ventless water heater. Our water heater is vented thru the roof of house... It gets plenty of ventilation. They wouldnt let me talk to a supervisor to complain... So this is why I am on here writing this review. I might add this is not our first issue with Whirlpool. Had a brand new KitchenAid refrigerator with ice maker. The ice maker didnt work from first day. After 3 techs and 3 visits it still doesnt work. Then also the compressor went out. If you want a better product and want good customer service then dont buy Whirlpool.Oh and one more thing. Our plumber also doesnt like Whirlpool. He said he had problems every time when he has to deal with them. He said its to the point when someone calls for services and tells him its a Whirlpool he just cringes. Now thats pretty bad. I just spent 4 almost 5 hours of my morning upset to the point of tears. With no results. Another note. I called my gas company. They said our water heater is in a safe place. If it wasnt they wouldnt be supplying gas to us. Live and learn. Done with Whirlpool.

It works extremely well. My wife and I have had it for several several years and no problems with it and it cleans the dishes very well. We really like the silverware holder. The right size for a family. Recommend it to anyone.

Greetings: I purchased a Whirlpool refrigerator on July 3, 2014. And the supports for the door to open and closed have grinded and worn out - not allowing the door to close properly, requiring being lifted up, and pushed close as much as possible. Not the quality I expected with the purchase of a Whirlpool product. I want this door repaired or replaced at the expense of Whirlpool. Having paid over $600.00 for the product, I didnt expect no problems like this at all, poor design. The weight of the door is too heavy to support a hinge mount in plastic, its ridiculous. Now cooling is being wasted, runs constantly, and just not the quality I expected nor received.

This machine, like all other water sensor machines, will not let you wash a few items that are lightweight without filling the whole machine up almost all the way. The reason being is that if the items are light, they will float in the water above the water level and the sensor thinks it needs to put more water in and even with putting something in to weigh it down like a wet towel doesnt always work, nor should you have to do this. You will waste more water in the long run if you only have a few items to wash, ie baby clothes, underwear, rags, etc. I am so disappointed that I had no other choice but to get this machine.

I agree with all the unsatisfied customers with the Whirlpool Cabrio! Clothes do not come out clean! I called Whirlpool also and was told to be sure to place my clothes around the sides of the tub, which I always did. If Whirlpool was smart, they would take the complaints about the Cabrio and offer the customers a small amount of money towards purchasing another Whirlpool washer. I know I would have appreciated that. Instead Ill go out and buy another washer and not a Whirlpool. Even my kids dont want this washer and its practically new!

I purchased an OTH microwave model #WMH1163XVQ-1 around 12/2011 from Lowe’s. Within a year, the paint started peeling inside of the microwave on the bottom. A few weeks ago, I noticed flames in the microwave and realized it wasnt my food but the microwave itself was on fire. Im glad I was close by to immediately turn it off. I hate to think what would have happened otherwise. Does anyone have any idea of what I can do about this? Would this still be under warranty? This is the first and last Whirlpool product Ill be purchasing.

I have a Whirlpool double oven. When I attempted to use the self-clean feature according to manufacture instruction, the bottom oven stopped cleaning in the middle of the cycle. I had a repairman out and he replaced the thermal fuse in the back of the oven. It cost $85. I didnt attempt to clean it again for another few months since I dont use the bottom oven often. When I did attempt to use the self-clean feature according to manufacture instruction, the same thing happened. I called the repairman and he said that the thermal fuse would blow every time I tried to clean the oven, because of the way the oven was manufactured. I contacted Whirlpool and they were not at all helpful. I intend to contact them again.

In June of 2010, I purchased a new Whirlpool Estate EED4400WQ0 dryer (serial number M01156261) with an accompanying washing machine. It has been in a clean, climate-controlled environment and gently used by my family of four for just short of two years. Last week, I began to notice that the clothes coming out of the dryer were cool and damp and it quickly became apparent that the dryer was only heating intermittently. This morning, the service person from the dealer who sold me the washer and dryer set (and a Whirlpool dishwasher a few months later) told me that contacts on the timer unit were bad and that the entire switch would have to be replaced. This is no small portion of the machine and the part alone will cost me about $150. After labor, we are looking at an expense of approximately half of the original cost of the machine - in less than two years. I called the Whirlpool’s customer service line to ask if there was anything that could be done and the answer was: Sorry, we cant do anything for you.” It is not acceptable to me for an appliance to become that expensive that fast. If Whirlpool cant do anything for me about this, then I will not be purchasing anymore Whirlpool products.

We purchased a Whirlpool Accubake Drop-in Stove (Model # RS675PXG015) on 10/21/2006 from Lowes Companies, which cost $1,100.00. In 11/2012, we had an error message E1-F2, and we tried everything to get it to clear - all suggestions given by electrical repairman who does repair for Lowes Cos. The stove is porcelain, which also has problems of staining that cant be cleaned. We were told the repair would cost $200 for the panel, and if that doesnt work, another $400 for the other panel. In reviewing other complaints for this Whirlpool stove, there are enough complaints to recall this item or at least give deep cuts for the parts to repair this stove. We have purchased other Whirlpool items, and this one is not well made and too costly to repair. It should last at least 15 years or more. Cant Whirlpool do something about this obvious problem?

I bought my Whirlpool top loading washing machine 07-22-14. I so dislike the locking mechanism and will be certain to never, ever buy a machine with that feature again. It is so irritating to try to add something but cant because its locked so have to hold the button 3 seconds to unlock and start all over. If there was any way to get around it I would. I will stay away from Whirlpool products in the future and will be sure to check the next time I buy that the lid of the washer can be lifted when not spinning. Also, I do not like that it sticks on rinse sometimes and the only way to end a cycle is to hold the button and then start over with much wasted water.

I count myself as lucky... my Whirlpool 465 Accubake Ceramic Cooktop stove was given to me. I have used it for 3 years. One day, out of the blue, the oven, which was in use, started clanging loud and jumping up and down. I started screaming & tried to cut it off & it would not go off. I ran to the panel box & threw the breaker. It also burned my food that was cooking. It did it several times. Then I decided to not cut the light on or touch the button to raise the temp. It has not done it since. I bake everything on 350 degrees and immediately throw the breaker. I am scared of this stove and plan to replace it. I will NOT buy a Whirlpool, anything. (washer/dryer/fridge/aircon)....once bitten...

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

I just finished reading multiple complaints that sound very similar to my experience in 2014. I bought a fridge for a rental unit in Oct. 2013. The freezer malfunctioned and froze up in back, 6/2014. Had multiple repairs with the problem going unfixed. After a couple of months with my renter without a fridge and laborious system requiring multiple phone calls on my part to get an exchange approved. The exchange went thru. It was delivered the am of Sept 11. Guess what? It was dented on the side. The delivery personnel thought is was prior reject and it was an attempt to get me to accept it as is with a small cost reduction off the original purchase price. NO thank you! So still no fridge from Whirlpool as of 9/13/14 that is functioning from Whirlpool and yet to have a call back from Whirlpool regarding the mishap. No apology, no remorse, just the way they do business. I will say that my local HOME DEPOT was willing to send me a loaner fridge for my renter for his garage. NOT ideal but better than nothing and quite nice of them and an example of what customer service should be! Thank You HOME DEPOT! SHAME ON WHIRLPOOL! Not sure how this will end but obviously is common them after reading the reviews. I am now concerned if they do replace it again with an undamaged fridge it will repeat the same dysfunction pattern and I will have to go this painful process all over again! EEEEK. Refrig WRT771REYBOO, VS33469859 BTW I had to pay for spoilage of food for my rent on multiple occasions because the repairs work for a week or so and my renter would stock up the fridge and it would go out and he would lose food. Whirlpool gave me a 50 food spoilage card after much complaining bc go figure the warranty does not cover food spoilage but apparently the extended does. Go figure?

I purchased a Whirlpool washer and dryer from Sears in April of this year. Here, to date, I had to call four Toms to have this unit repaired. I contacted Sears to have the unit replaced. I believe this particular unit needs to be recalled. Sears informed me that the unit must be assessed by one of their qualified/certified technicians before a request to be valid. I have concerns about this statement. Employees will not go against their company in fear of retaliation. In addition, I paid cash for the unit and now cannot get my money back. I’m dissatisfied with Sears and their values.

We have had Whirlpool front loading washers for 15 years. The first had a bad bearing problem, that was eventually fixed, but still disappointing. The second doesnt is missing some features that the old one had. All and all I am happy with this washers and do not know of anything better, within my price range.

Bought Whirlpool refrigerator (Model # WRF560SEHZ00) December 2018. After 2.5 years, the door hinge failed and could not be replaced. $1,000 for new door. Dont buy! Too bad there wasnt a 0 option for the rating.

Whirlpool Gold Class Refrigerator is not quiet 4 years old. Starting at about a year old, I had to start defrosting the freezer periodically because the freezer coil would build up ice to the point where the fan would start rubbing on the ice and making a loud noise. Then about a year ago, it started leaking water from somewhere around the water filter. The water damaged my cabinets and flooring. Then the freezer slowly started to warm up. I had a technician look at it and he determined the compressor is bad. That would cost about $900 to fix, according to him. I thought it had a 5 year warranty on the compressor and associated parts. Whirlpool is claiming this is not true. The repair costs will not be covered. I paid almost $3,000 for this refrigerator! Didnt last 4 years and caused thousands of dollars in damage to my cabinets and flooring! I will never buy another Whirlpool appliance! Buyers beware. Stay away from Whirlpool at all costs!

I bought a new house in Hattiesburg with a Whirlpool dishwasher that is loud. It runs normally but when you open it the dishes are just as dirty as when you put them in if not worse since it will spray any residue from the bottom to the top shelf. I have taken it out and inspected all lines and such but can find nothing wrong to the naked eye. Thus I’ve got dirty dishes that must soak since the drying cycle retakes grime back on and then be rewashed.

Purchased gas water heater from Lowes in 2012. Had no problems until July 2018. Its under warranty but have had to replace the control valve completely and the burner 5 times and it still is not fixed. Dont waste your money. Buy something else.