I love my glass top stove and glad I purchased it, so much easier to clean, I think they should all be made self-clean on any stove, I did not notice that some dont come with it and some dont. Remember not to start cleaning the top of the stove until you can touch it with your hand.

I bought this washer thinking it would last me for a long time. And now it wont wring out my clothes and I just wanted to say I am disappointed in my Cabrio Washer.

It was on sale and the price was good for comparable refrigerators. The biggest problem is that instead of a simple dial to control temperature, you have to be a computer genius to figure out how to turn it to a different temp. even by the instructions. And the ice maker throws ice all over the floor even if you hold the glass up against the top. When I first got it, it made a very loud noise when it run, but that changed with time to a bearable volume. Everything seems to work well other than those few little things.

Whirlpool WRS965CIAM - Consumer beware is what weve learned. Whirlpool has apparently not monitored the hundreds of complaints about this particular refrigerator model. Its sleek and pretty and has a ton of features and I was very excited about purchasing it. We havent moved into our home yet, but turned the refrig on the next weekend after closing, started painting rooms, even had some nice ice water. I came back next day to a very large amount of water all over my hardwood floors. We are talking bath towels. Who would know you are supposed to call Whirlpool directly? We sure didnt. We called Hart Appliances, where we purchased it from. They gave us a number to call for service on Monday. The repair guy came, didnt have what he needed, so he came back later in the afternoon and fixed it, until we came back next morning and the floor was again flooded... Again, we are talking bath towels. I called them back and was told it needed a part, that took 4 days to come. Its here today but they are not coming until Monday to fix. Customer service at Whirlpool has no record of calling out a serviceman. They wont have info until problem is fixed. According to folks on the internet sites, that could be months or never! Okay, ladies... am I ever going to trust that this refrig will ever be fixed? I wont dare go away for a weekend without fear it will leak all over my floors and ruin them. We were going to purchase a chest freezer and small full fridge for drinks and overflow to keep in the garage. Instead, thats where this fridge will end up. Expensive lesson learned. Whirlpool doesnt replace brand new, out of the box, defective refrigerator. Whirlpool also doesnt admit there are complaints out there... Customer service person told me she had no record of complaints... I said when we get off the phone... GOOGLE WRS965CIAM and you will be amazed. My next complaint is going to Consumer Reports. We bought the magazine and followed the advice. Id like to think we just got a lemon, but there are too many complaints out there for that to be the case!

I purchased a Whirlpool WTW6600SW in January 2010. I dont normally purchase an extended warranty, but it was a fairly expensive washer. So I did. In July 2011, water starts gushing all over the floor. After my first visit to see what is wrong, I ordered a part. I was out of a washer for 2 weeks. Then in August 2012 the same thing happened. This time the repairman didnt get the part on properly, so they had to come back a third time. I am out of a washer for about 3 weeks. Now, October 2012, it is doing the same thing again! Customer service tells me it has to be repaired for the same problem four times in the same 12 months in order to receive any replacement value. It will have to break two more times! This washer is a piece of junk!

I bought a Whirlpool Cabrio Top Load washing machine September of 2012. It has never cleaned the clothes well. For the last month the machine has a very loud spin cycle. I am very unhappy with this purchase and it is 2 months out of warranty. I emailed WHIRLPOOL and was told that all appliances have problems and wear out. WOW! It is 14 months old and has been used with care. I will never buy another Whirlpool product.

Bought top of the line KitchenAid refrigerator $4500... Completely stopped working in 3 months. Cannot get ahold of anyone at Whirlpool & their phone system is ineffective. Appliance technician came out, cannot get the parts he needs from Whirlpool!?! He said that if he cant get parts in 21 business days then Whirlpool may consider replacing the fridge. Is this a joke?!!! I have a 1970s Frigidaire still working!

Originally, I loved my machine. At the one year mark, my washing machine began a f51 error code. I looked it up and it had a recall. The entire board had to be replaced. Now, I keep getting a ul code and it will not quit. Also, the inside of the top is rusting out so badly that chunks of rust fall into the washing machine and stain my clothes. I wish Whirlpool would fix these common errors. I see many other people complaining online that the same thing is happening over and over.

Smelled strange odor in laundry room area.. Noticed plastic panel to Whirlpool electric water heater controls was melting and immediately closed breaker to the heater.. After inspection of heater control panel, noticed all wiring damaged and burnt causing burning smell.

I have bought what I thought my dream washer and would never need to buy another one. I told people about it and could have sold many of them. That was in my first year. Now I am into our second year with them and it quits. It cost right at 500.00 and when I called Sears, the company I bought it from, they charged me a service call and says it will be $585.00 to fix. WHAT? This is a lemon. If I were to buy a car and have this sort of problem they would warranty it. Why not appliances? This is an outrage. This should be illegal to sell.

I purchased a Whirlpool fridge brand new. Not even a freaking yr old it went out!!!! Repairman came out and said it had leaked crap all over really. He said it would be too much to repair. Better off on purchasing a new one.

My elderly mother purchased a Whirlpool Cabrio washing machine in 2013 (Model Number WTW8600YW1). It never filled properly with water. It evolved to a sensor and circuit board issue that Whirlpool never totally remedied. Hence, the machine never worked properly. This 800 dollar purchase on an elderly persons limited budget had to be utilized minimally. Now fast forward in 2015, even with minimal usage and white glove handling, the machine is displaying an F51 error. You guessed it, Whirlpool will not remedy the issue, although it is well-documented to be a widespread complaint hence clearly a product defect. Shame on Whirlpool, their business practices, and what amounts to theft of an elderly womans finite income. I have advised my mother to trash the useless Whirlpool appliance and purchase a Kenmore washing machine, of which I have been the proud owner for 10 years, doing laundry for a family of 5.

We got a DEAL for this nightmare for nearly $700 back in 2014. Nothing but problems. Constantly finding plastic pieces at the bottom... some identifiable; others not. They are from the cheap parts within. The control board lights (all but 1 works) went just after the 1 yr mark. We are now having to replace the top Rack Adjuster (MORE CHEAP PLASTIC), as it has been barely hanging on for the last year and a half... constantly fighting it, as it would drop all the dishes if you moved it wrong.Now, the water is not draining at all... period. We clean this religiously - always rinse dishes completely, use rinse aid, never stuff dishes. Today we find a random plastic piece, which we are now trying to identify. NOTE: we dont put plastics in the dishwasher. So, today a new plastic piece and major drain problems. We are in the market and purchasing a new French Door Refrigerator and Front Load Washer. Will NOT be going with anything Whirlpool. Not much better these days, but this name has a big RED NO for us. Made it even worse when we contacted for help after that 1 yr mark. NO HELP AT ALL.

The capacity is small but it does a good job of washing and drying the dishes. I always check to make sure that all dishes are washed including silverware and they are. My dishwasher is quite old but it is still sufficient for our use.

I bought an American US Craftmaster water heater in October 2006. I have paid a plumber 3 different times to work on this and the pilot light will not stay lite. I used the replacement parts they sent, followed their technicians directions over the phone, etc. Nothing seems to work. Christmas was not pleasant at my house this year. I’m still taking cold showers.

We bought this on sale but we're really glad we did. I was surprised how quiet it was while cleaning the dishes, insulation I guess makes it quiet. The wife also uses Cascade liquid dishwashing soap which seems to get the dishes really clean. Rinsing before we stick them in probably doesn't hurt, but overall, we are very pleased. The dishwasher has an adjustable rack which we've only used a few times and the start is easy enough for me to even figure out, sorry guys, but yes I do the dishes sometimes. Hope this helps. Good luck. Oh its model # is WDT730PAHVO.

We had purchased a Whirlpool Duet Sport Washer and Dryer in 2007. Since that time we have had several repairs on the dryer, resulting in us having to purchase an entire new unit in 2011 (4 years old), along with mold that has accumulated in the washing machine on the tub and rubber seal that cannot be removed after several attempts utilizing several products that were recommended. The end result is our laundry that has been washed - comes out with a musty odor. Not happy at all with the top of the line, best possible machine to produce clean laundry as was sold to us! This has been a nightmare, and a totally dysfunctional appliance that should have lasted longer than 5 years!

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

My Cabrio was built in April 2016, its now Feb 2019, and its not working. Shows error code of LF, the inlet water value is bad. I bought a Sears protection plan, repairman comes out, tells me no-one has the part anywhere, its backordered and no way to know when it will deliver. Sounds like a scam so Sears doesnt have to fix it and Whirlpool makes little to none of the part so you have to buy a new machine. This machine also takes forever to wash clothes, sometimes part of the clothes come out dry because not enough water. Its a huge tub, but of no use because theres not enough water to clean properly therefore, you have to do small loads. I always put it on high water because the other features like, quick wash & normal do not give but only little streams of water! The first one I had delivered made a funny noise from day one so Sears replaced it the next day. This one has NOT even lasted 3 yrs. There needs to be new legislation placed upon these companies with regards to the products they make. It should be illegal to make such junk and be able to charge high dollar for it and it doesnt operate well or last very long. They are laughing all the way to the bank on everyones dollar, intentionally making products that last less than a few years! I Will NOT purchase Whirlpool or any of their products again! They owe me a new Cabrio and Im going to make sure I get it and get my moneys worth! DONT WASTE YOUR HARD EARNED MONEY ON THIS JUNKER! DONT BE FOOLED BY ITS PRETTY SLEEK LOOK.

My wife and I purchased a new Whirlpool gas range (Model#WEG745H0FS0) almost 2 years ago. Woke up one night to the smell of heat and the oven had come on! Thank God we were home. Very dangerous! Repair is going to be expensive! Havent used the oven portion in about 3 months now. And Thanksgiving is just around the corner! Any assistance is greatly appreciated.

On May 15, 2017, I purchased a new Whirlpool Water Heater, unknowingly made by American Water Heater Co., from Lowes (receipt attached). Model Number ES40R10-55 with a 10 year warranty. The water heater was installed using the directions in the owners manual. Upon turning on the current to the water heater after it was filled with water and all air removed from the plumbing, the module gave a code stating the top element was not working. Called the Technician Assistance Hotline and they gave me a RA number to get a new top element from Lowes. Got that on May 16 and had to call the plumber that is contracted by American Water Heater Co. to come to the house and inspect the heater to make sure it was installed correctly.The water heater worked once the new element was installed. On Oct. 3, 2017, had more issues with the module stating the top element was not working. Called the Tech. Assistance Hotline and they gave me another RA number to get another top element. On Oct. 4, got the top element and installed it. The water heater started working again. On Oct. 6, the module stated the bottom element was not working. Called the Tech. Assistant Hotline and had the plumber come out. He determined that he could not find out why it was doing this and also said that both elements were good along with the element that I removed on Oct. 4, which I still had. Since then, the module has been giving codes stating that both elements are bad and I have not had any hot water since Oct. 7. American Water Heater Co., Whirlpool, and Lowes all refuse to give me a refund for this piece of junk! All blame the other for the problems and none will take any responsibility for the water heater not working. I will never buy another appliance with the Whirlpool name and definitely will not buy anything made by American Water Heater Co. I also will never buy another appliance from Lowes as they are not willing to help me in this matter. If you do not want to experience the headache and frustration of owning a new appliance that does not work, I would suggest that you do the same!!!

Purchased a Side By Side refrigerator just 16 months back and this is the Third time the ice maker has failed. Who makes JUNK like this?? Is there not One company that can make anything to last at least three years. I am disgusted with the junk we bought that has Whirlpool on it. I should Sue Home Depot and Whirlpool for Fraud.

We purchased a WRS576FIDM refrigerator from HHGregg in August 2015 and immediately had problems with ice maker and door having condensation on it. I contacted Whirlpool who had a tech come to my house and verify problems. Whirlpool replaced it with a new refrigerator in November 2015 and w/in a week it had awful condensation on the outside of the door, dripping onto the floor and pooling water. A tech responded to our house again and confirmed the problem with Whirlpool. Whirlpool advised they would be sending out two new doors for our side to side refrigerator and said we should receive them within 4 to 6 weeks from late November 2015. I asked Whirlpool to send us a different model because this is the second refrigerator of the same model that has the same issues. Whirlpool refused. I have spent countless hours on the phone with Whirlpool, HHGregg, and waiting for service appointments and my patience is getting thin. I just contacted them today 2-9-16 to inquire about my doors since it has been well over the 4 to 6 weeks Whirlpool said it should take to receive them. The Whirlpool rep on the phone had no information about the status of the doors and said that they would have to contact the service company to inquire more about the status of the doors. He also said that under special circumstances, it may take an additional two weeks for certain door orders. I once again requested a different model of refrigerator or a refund.I tried to get HHGregg to allow me to return the 2nd refrigerator just days after I received it since I was having the same issues as the original one I purchased. HHGregg said they could not since the 2nd refrigerator did not come from them. HHGregg said that they did not know why Whirlpool sent me a replacement refrigerator directly and added that normally the returns go through them. I feel like I tried to do the right thing by contacting Whirlpool for warranty work, but I feel that if I would have called HHGregg I would have been able to get a different brand refrigerator which is what I really desire after all these problems with the Whirlpool brand. I did purchase an entire Whirlpool kitchen set from HHGregg. The only problems I am having is with this refrigerator.

I have Whirlpool 25 in. Side by side. I love the space freezer size is bigger than the old one I had. Makes ice as it should. Overall solid appliance that I trust. I purchased this refrigerator a year ago after research.

I recently purchased a new Whirlpool propane water heater. Dependable name, dependable product, years of trusted service, right?! We have bought many Whirlpool products over the years but never again. Got it home and installed it. It sounded like a plane taking off, and that was in the garage. Next came the lack of hot water. Mind you, we replaced a 40-gallon tank with a 40-gallon tank and the last one we had lasted 18 years without a problem.Well, same showers as usual, and we were turning up the heat mid-shower and again and again during the shower. Even turning up the heat on the water heater didnt relieve the problem. We are not happy with the product. And, no, there is nothing mechanically wrong with it; its just sub-par. Our water heater from 18 years ago worked more efficiently than this newer model. We called customer service, and we were told that unless there was something mechanically wrong with it, such as a defect, there was nothing we could do. There’s simply no recourse.Shame on Whirlpool for not making a quality product and standing behind it. This was a very expensive purchase - over $500.00. We thought we were buying a quality appliance. Very disappointed, and I will be returning it. I’m never buying another Whirlpool product again. I can only hope that the company we bought it from has a better customer service policy. Very frustrated and disappointed.

My husband and I purchased a Whirlpool Washing Machine & Dryer a year and a half ago. As of current, the machine has stopped working. The machine will turn on but will not agitate. It makes a horrible grinding noise. The type of washer we purchased was a WTW4900BW0. Whirlpool told us we should have purchased the extended warranty. But, I feel we should get more than a year and a half out of a machine that cost $650.

We purchased a Whirlpool dryer about two years ago. Unfortunately I havent had the time to compose a letter stating my dis-satisfaction until now. After much research and haggling we decided on the Whirlpool Cabrio Platinum model, a very efficient (we thought), and even attractive model. It has proven to cost us much more than we bargained for, as EVERY time I do a dark wash, which is usually two to three times a week I must re-wash the items once or twice after! All of the items come out of the wash with white spots all over. Thinking it is soap, I run the wash again on a rinse cycle: nothing changes. Then I redo the wash - this time not using soap. The result is a bit better, but I still have to take a wet washcloth and rub the areas out.I did voice a complaint one time to which I received a letter stating that I should read my manual, specifically the troubleshooting guide. I dont have time for this. Again, we purchased this machine for its cost and efficiency, yet its ending up costing much more than it should as for every load I do (of dark clothes), I have to do one or two additional. (No telling what is on the light or white clothes that I cannot see because of their color!) This machine has been a total waste of time and money; I will never purchase another Whirlpool machine as I am extremely dissatisfied with this product.

Bought a Whirlpool refrigerator and now it is dead after only 3 years - the gas is gone. The Dealer at Budget Appliance Surrey told us it was not a good fridge to begin with (but sold it to us for $900.00) and that Whirlpool had made a lot of fridges cheaply to begin with... So it was not their (Budgets) fault. When I contacted Whirlpool they were really too big to listen to my complaint and even though I had the receipt, they did not care to hear my complaint either. Never buy a Whirlpool fridge.

Whirlpool has been a well known brand for many years producing well made appliances. With strong customer support and appreciation. I myself have owned many appliances made by Whirlpool from Fridges to Washers and Dryers with no problems.

Im 61 so I have some experience. I personally know fridges that have lasted over 20 years. I just Googled it and found out the norm is 14 to 17 years. This hunk of crap lasted 4 years. As soon as I got it home and plugged it in (4 yrs ago) the most noticeable thing was the noise. It sounded like a tractor! I considered taking it back (wish I did). Then after a couple of years the pull handle came off! The whole time we had to be careful the door was closing properly. It was problematic. Ive owned (and re-sold) about a dozen fridges in my life. This the first one to fail on me. It was bad from day one!

I bought a Whirlpool water heater not even 3 years ago, and I am already replacing parts; thermostat,thermocouple, and as of yet, no fix. We contacted Whirlpool, and they said that everything has been tried, and if the thermocouple doesnt fix it, well have to hire a plumber at our expense. Its kinda ridiculous. The water heater that we replaced, had been in the home for almost 17 years.This one didnt even make it to 4.

11 months after purchasing my Whirlpool 40 Gal Gas Water Heater N40T61-343 I woke to cold water one morning and found the LED flashing 4 times - high temperature shutdown. Unable to find any reset I called Whirlpool and after a couple questions, was sent a replacement control unit. Happily it arrived 2 days later. I was told then that it was because I had residue in the tank. I had no idea how he determined that because none of his questions even touched on that. Anyway, I had hot water.Nearly a year later now to the day and again I have no hot water. This time the pilot burns very weakly when I try to light it and then goes out. After three attempts I get 7 flashes on the LED - Gas Control Valve Failure, part of the same unit I replaced a year ago. Am calling tomorrow since its too late to go through any tech support steps over the phone that Im reading about on this site and seeing on Youtube. Honestly, I didnt replace the last heater because I had nothing better to do than replace parts on this one annually. No, I will not purchase another Whirlpool unit especially after reading all of the similar if not identical issues others are having.

I bought the Whirlpool Cabrio 5.3 cubic foot washing machine to replace a Samsung equivalent machine. I am so extremely disappointed with it. As a mother of nine (seven of them boys) I need a quality machine. Unfortunately this is not one. The clothes come out of the machine just as dirty as they went in. The pants still have dirt on the knees. I think a rinse in the sink would yield better results. I use the highest soil setting, warmest water fabric will allow, and exclusively Tide detergent. I only fill the tub with half a load (completely voiding the value of large capacity) and yet still have to run clothes through twice.I really don’t have time for this. All the kids clothes have to be inspected before drying. I wish I could go back in time and keep my Samsung which was recalled. I would rather take the risk of an exploding machine than deal with this one any longer. Unfortunately, after spending over $1000 on the washer (and buying the matching dryer) I’m stuck with this useless machine. I hope others don’t make the same mistake I did.

My Whirlpool Cabrio Washer is less than one year old and quit working. Sears was supposed to come out and fix it (I even have the extended warranty till 2014). Service never showed up; when we called, they told us we had been rescheduled. Here it is the rescheduled day time slot and they still have not arrived. Im getting the runaround from them and I am supposed to be grateful because they gave me a $75 gift card for my inconvenience. Im on hold with Whirlpool because I just want them to take the washer back. I have been told by Sears since it is over 90 days, they cannot refund my money. I just have to wait for a repair which may or may not happen since they may not have the parts. This is unsatisfactory service from both Sears and Whirlpool. I have always bought my appliances through Sears and they have always been Whirlpool. I wish I would have read all these reviews before I purchased this model.

We purchased a Whirlpool Refrigerator Model Number WRS555SIHZ06 Serial Number HRA2506806 on July 15th 2021 from Lowes. First one from Lowes came off the truck damaged so working out of a cooler in the kitchen for 2 more weeks. Now 4 months later the compressor is out and all the food spoiled like $400 bucks gone and food is expensive these days. I called and Whirlpool said no food allowance and no replacement. Fridge can be brought over - so repairman will come out in 6 days and then say he has to order parts then I wait two more weeks then the repair. So 3 weeks without a fridge with the holidays coming up and people to feed and food to cook. This is going to be interesting. I hate Whirlpool Refrigerator - never again will I purchase one of this appliances. The GE I had for 12 years and no problem at all for 12 years. What is going on with these companies????

I purchased all new, upper end Whirlpool appliances for our newly built home just 6 months ago, to include a side by side refrigerator with ice maker and water dispenser, an over the stove microwave, a smooth cooktop oven/range, a dishwasher, a washing machine and a clothes dryer. We plugged in the new refrigerator, and after 24 hours of letting it sit and get cold, we bought $300.+ of groceries and filled our new refrigerator. We pulled the milk out hours later and it was warm, checked other food items and found them to be warm, too. I placed a thermometer in the refrigerator and it read 55 degrees. In disbelief, I placed a second thermometer in the refrigerator and it, too, read 55 degrees. Being brand new, only hours old, and clearly not working, I called for a replacement refrigerator. Our builder said we needed to call Whirlpool for a replacement. Whirlpool refused to send us a new refrigerator. Needless to say, we had to throw out all of our food for being dangerously off temperature, and we were less than happy about wasting $300.+ on food we could not safely eat, but glad we didnt have food poisoning. Not even the freezer could maintain a temperature below 55 degrees. While waiting on a repairman, we noticed that we were not hearing the refrigerators motor come on more than once every several hours. They sent a repairman out three days later, and he found nothing wrong other than a poorly fitting door, he said. He replaced the door hinge and told us our refrigerator would be cold in 3 - 5 hours. Well, it never did get below 55 degrees, set on the coldest setting. Whirlpool was called again and they couldnt seem to get another repairman out to fix my brand new refrigerator that could not perform its most basic function, which is to maintain food at proper temperature. Again, Whirlpool refused to send me a replacement refrigerator for this clearly defective refrigerator we were stuck with. We were told it would be 2-3 weeks before another repairman could come out, and then he would have to order parts after he diagnosed the refrigerator problem, taking another two weeks. We needed a refrigerator, like most people do, so we were forced to take this brand new refrigerator and stick it in the garage, not being able to sell a brand new refrigerator that wont get cold. Angry at Whirlpool for taking our money and leaving us with a refrigerator that never worked, we bought a Samsung refrigerator that we are very happy with - it works! After 2 months, our Whirlpool above the stove microwave has the motor turn on when we close the door, and it takes several opening and closing sequences to get it to shut off. We will be replacing this new microwave when we can afford to.Our ceramic/smooth top stove/oven, takes a very long time (at least 20 minutes) to preheat and the temperature in the oven is not accurate to the set temperature, according to my oven thermometer. The cooktop surface is inferior; it gets permanent water spots and it scratches very easily even though we use the correct pans and are very careful with it, and does not come clean easily. The surface feels rough, not slick like the GE Profile ceramic/smooth cooktop range that I had for 14 trouble-free years. I am using the same exact pans that I used with our GE, and we know how to be gentle with a smooth cooktop surface. After 14 years of owning the GE stove, the GE felt slick and smooth, cleaned easily, and did not have one single scratch on it. It looked as good as new when we moved, after 14 years of use. I will be replacing this inferior Whirlpool smooth cooktop range as soon as I can afford to, as well. Last month, right before Thanksgiving, our new Whirlpool dishwasher started making a really loud motor sound and quit working that day. It would fill water, drain the water and shut off. I once again called Whirlpool, and they were maddenly unhelpful. This time, they told me they would have a repairman call me in 5 working days to schedule an appointment to come and see my non working dishwasher. After 7 days, I called Whirlpool AGAIN, to ask why someone did not call me for an appointment. I was expecting a house full of people for Thanksgiving and I had no working dishwasher. I spent a lot of money buying these crappy Whirlpool appliances and am very frustrated. This time, Whirlpool told me that they could not find a service person in my area to service the unit. As if I live out in the middle of know-where?! I live 20 minutes from Austin, the state capitol of Texas! A 20 minute drive from the capitol building to my door! Whirlpool told me I could take my 5 month old, broken dishwasher to a repair shop and that the repair shop would need to call Whirlpool before they did any work, and that Whirlpool would only authorize a maximum of $150 to repair my dishwasher. They actually had the nerve to tell me that I would have to pay for the repair, and they would mail me a gift card in 6 - 8 weeks to reimburse me up to $150 on my new, broken dishwasher that is under warranty. I was furious!! Some warranty! The broken dishwasher is now sitting next to the broken refrigerator in my garage. I needed a dishwasher before Thanksgiving dinner, so I went and bought a Samsung.I realize that all makers can have a lemon, but all of my Whirlpool kitchen appliances are junk!! I will never own another Whirlpool product for as long as I live, and I will tell anyone who will listen about our abominable experience with Whirlpools customer service and the expensive, crappy appliances we unfortunately wasted a lot of our money on. Do yourself a huge favor, buy anything but Whirlpool! Thankfully, everything else about our new home has been great. Our new Whirlpool appliances will remain a very sore subject for year to come, I suspect.

My house was built in 2004, therefore the Whirlpool water heater was installed in June 2004. The water heater broke down (It flooded my garage) in 2007. I didnt have to pay for the water heater at Lowes (It was under Warranty), but I had to pay for the delivery and labor. Now, I had to call customer service, because the Whirlpool water heater installed in 2007 has problems too. The pilot light would not stay lit. I have to pay a certified technician $180, just to come to my house to fix this problem, when this is a recurring problem, with this Whirlpool water heater that was purchased at Lowes. (The heater has a six-year warranty. Not sure what this means if the product is defective to begin with). Im very disappointed with this product. It has too many problems, and I have to pay for a defective product. I would stay away from Whirlpool if I could.

The water dispenser tube cracked and split off near the dispensing end, making the dispenser unusable. Not a consumer repair, by any means. Refrigerator is only a year old. I had a similar parts quality issue with a Whirlpool dishwasher. I will never purchase another Whirlpool appliance, and will advise all to avoid as well.

Near 3 years ago we purchased this side by side going by how good Whirlpool products are supposed to be. Recently the bottom freezer started frosting up and not clearing. Tried all suggestions in the manual. Could not find any information online. The manual was useless. I went online to Whirlpool support 3 different times asking for help. Never got a reply. The racket it made was driving us crazy. It short cycled since it was frosting up. Set up an appointment online. They got that correct and responded quickly. Go figure. The tech came was very nice & professional. No warranty. Find out they only provide a one year warranty. That is absolutely nuts. A refrigerator should last 15 years with no major problems. Should not have needed a $500.00 extended warranty for a $1,300.00 refrigerator. Turned out 2 components needed replacing. Cost just over $400.00. Now were worried it is going to fail again in who knows how long. Whirlpool used to be a respected brand. Never again will we buy a Whirlpool product. 1 year warranty show you they know how cheap they are building their products.

I have owned a Whirlpool Cabrio HE WTW6400SW3 for two years and have had nothing but issues from the start. Control panel was replaced twice under warranty. Also the clothes (socks underwear) were under the tub blocking the drain. This is not covered under the warranty. I was told by the repairman that this is the usual issue. He told me they took the front loader design and just stood it up with no protection from garments and coins getting under the tub, through the under tub filter often and into the drain pump. You are kidding me? Almost $1000 for this washer and its so ill designed. I have read forums that this has been an ongoing issue for several years yet Whirlpool continues to build these. I dont vent to forums often but just now I finished removing the tub to remove 2 socks and 7 cents. Also, I had to remove the drain pump and found another 16 cents inside it. So far the pump has not been ruined but this time water is coming out from the machine so will probably be ordering another pump for it as well. The wife wants it out of the house tomorrow and not another cent spent on it. But it is only two years old. What do you do? If you are reading this because you are searching for a new washer do not purchase a Whirlpool! I have gotten nothing but grief and was put off by their customer service dept as well. I guess after fielding so many calls about the same thing they have been told to just put all the calls off as no big deal. I am sure Whirlpool is making a killing off the sales on this unit. The claims made during the sale convinced me. What a joke. Look around the internet and you will find hundreds if not thousands of the same issues.

Whirlpool customer service is non-existent. I have a Whirlpool microwave that burned up after two months of use, and they sent over a technician twice, in the past three weeks and it is still not working. Now, I am being told that it will take another two weeks before the correct part is found, and the technician is sent here again to fix the problem.I have no microwave now, for what is going to be about 5 weeks, and that is only if they get it right this time. Whirlpool wouldnt approve for me to have it traded a trade for a new one at HH Gregg where I purchased it in Aug of 2011. HH Gregg only has a 30-day return policy, and it went bad after 60 days.

Our gas stove (Whirlpool WFG714hLAS1) has been working fine and it looks great. However I just tried the self clean cycle to clean it up. I dont do a lot of cooking with only the two of us, but I like to keep things clean. I was very surprised after the first time - it didnt look much different than before I ran it! I was used to simply wiping down the oven following a cleaning, just removing the leftover ash. I havent had to scrub an oven for many years and it is very hard for me. I ran a second cleaning cycle and it didnt look any cleaner. We both had to kneel down and try a variety of non abrasive cleaners which finally got most of the grease spots, but not all. I guess we will just have to cover the roasts and try to keep aluminium foil on the bottom rack as much as possible. PLEASE re-consider buying any brand stove that has this awful feature, unless you like cleaning ovens by hand!

Whirlpool WRF989SDAM00. We bought this junk April 22, 2013. 7 visits from service guy throughout the entire year we have had this, problems began almost immediately. Whirlpool gave us a 3 month complimentary warranty (which is up at the end of June). Same problem is back (back left corner freezing up and I think it has also made our ice maker not work nearly as good as it should). We called a few weeks back to report problem yet again, the rep on the phone treated us very poorly. They said they have a new part that is currently on back order that is going to fix the problem once and for all to which my husband replied: I do not have much confidence this will fix the problem as you have sent 5 or 6 new and improved parts over the year and all has failed. He then asked, will you extend the warranty once more, and they said NO. We are stuck with a ($2,700) piece of crap that they just keep trying to find new parts to fix it! On a separate call we asked for a refrigerator replacement to which the rep basically laughed and said that will never happen!! What course of action can we take here?? This company is dead to me!

Last week dishwasher leaked. Set up repair with our local gas company that has service plus. Came today. Repairman showed me there is a hole in the bottom of the tub. Upon closer inspection it looks like the manufacturer drilled a hole that wasnt needed so they routed out a depression in the tub and must have put in some sort of plug or filler of some kind which now came out. I called Whirlpool and explained to lady about the defective tub. She said well if it had a plug of some sort put into the tub it would have fallen out before this. I said Well it didnt it just must have happened as it never leaked before. She said it is no longer in warranty. I told her this is a defect to me as if you drill a hole in the tub that wasnt necessary and then the plug failed that you put in to hide the extra hole. It is a defect not a warranty issue. Upshot is she wouldnt do anything about it. I told her I have always bought Whirlpool but if this is their policy its the last time I buy anything made by Whirlpool. After reading all the complaints registered here about Whirlpool I guess I am more than fortunate as my dishwasher (bought in 2006) had run great until their plug fell out (Great except for all the rinse aid that has leaked out for several years.).

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

Ive owned the microwave for 2 years, and recently the DOOR AJAR alarm goes off whenever I try using it. The appliance is now essentially unusable. I wish I knew about this known defect before purchasing. I spoke with Whirlpool Customer Care, and they want to charge me to have someone come fix a known defect. The charge is more than what I paid for the microwave. Please avoid Whirlpool at all costs!

We bought a new washer and dryer back in August. We have always bought Whirlpool. Whirlpool (or the government) now is trying to save the planet by regulating the water level in your washer. The water levels are so low your fabric softener & soap leave lines on dark clothes. IT SUCKS! It does not clean like our old washer. Very dissatisfied and would love to return it and get a washer where you can regulate your own water level. Its unbelievable that a manufacturer can make decisions for the consumer like this AND sell this feature which you PAY MORE FOR. TAKE IT BACK! Ill never recommend this product to anyone.

I purchased the washer and dryer set. My complaint is with the washing machine top loader that does not have the tall agitator not getting the clothing clean. All of my clothing come out of the dryer with dirty spots on them where they did not come out in the wash. Its a waste of water and energy because I have to wash them twice! I purchased the combo model numbers WED7300DWO and WTW7300DW0.

Whirlpool Cabrio washing machine is less than five years old. First repair was replacement of control panel (under warranty). Second, third and fourth attempts to fix the out-of-balance problem which continually caused the machine to shut down altogether (even a small load) left my repairman totally frustrated after replacing most of the parts, finally telling me it just cant be fixed! What? I paid over $1,000 for this machine in Oct. 2007 and expected it to last many, many years. My mother-in-law has a washing machine she bought used in 1979 and it is still working beautifully. Ive read the 14 pages of complaints on the Consumer Affairs website and agree with Diana in Kissimmee, Fl - I am sick to my stomach not only for Whirlpool not recalling the Cabrio, but for Lowes and Sears and any other supposedly family-friendly business for continuing to sell it! Someone please contact me if you know of a class action suit being filed.

The silverware comes out all spotty and water stays inside cups and on dishes. I am going to have to replace all my utensils. They are so spotted that they look filthy. Knives, forks, spoons and all serving utensils. I have used this brand new Whirlpool dishwasher from August, 12, 2016 to today Oct. 21, 2016. I am very upset.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

The reason for the call was to find out how to file a claim after replacing the ice maker and paying for it the 3rd time, they were very argumentative and would not listen to me about the design flaw in the wire harness that burns up the motor for the ice maker. I found out about the design flaw from talking to the repairman that replace the ice maker who works for Dick Kearsley Clearfield UT. He told me that Whirlpool knows about the problem for the 22 cubic foot and 25 cubic foot refrigerator and that is why they have 2 different new wire harnesses in the box for replacement of the old wiring harness.

I bought a washer from Lowe’s Home Improvement in September 2017, called a couple weeks after the purchase. They sent someone to repair machine. It is still not working. Called Lowe’s back. Was given an 800 number. Talked with someone at this number got nowhere. Was given another 800 number. I am waiting to find out what is going to be done. This is terrible customer service.

We bought a Whirlpool cook stove with a black top in 2009 and this year, in 2011, while cooking a pot of stew, the stove top burner began to make loud popping sounds. When I went to check it out, there was smoke coming out from under the pan and pieces of glass that had exploded out in small chunks. When calling the customer service line at Whirlpool, they told us that it was no longer under warranty and could not be of help. Their only explanation was that they would only cover a new stove top if it had cracked or broken this way when putting a cold pot on a hot burner. They said their technician could tell if this was why the shards of glass were exploded from the burner.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

I purchased this water heater (Model# E2F40RD045V, Serial# 1122T461615, Product# 0826354) 1 week ago (Oct. 17, 20011) and it has been installed only after 5 days (Oct 25, 2011). It has yet to heat the water more than warm. I called Lowes (Oct. 21, 2011) and tried to return it only to be told that I would have to get an authorization number from Whirlpool. I called and Whirlpool wanted me to trouble shoot the problem. I had to have an OHM meter and amp meter to do so, which means that I needed to have an electrician present to do these test because I dont own any of these things. I was then told that they could send someone to my house, but I may end up paying for this. I then asked to speak to a supervisor and was told that she would tell me the same thing. The call ended when I told them that I guess I would have to do the best I could because I was not getting any help from them. Out of desperation, I went back to Lowes and got a new heating element to try to fix this problem myself. I installed it and it still did not work. I called back the next day and still did not get any help, I was only told that I needed to have these meters on hand to trouble shoot the problem. Why is it that I have to do this? The lady did not seem to care that I did not have any way to handle this problem. I felt that this problem was my burden and not Whirlpools for putting out a defective product. I have in my home about 5 new Whirlpool major appliances and have been a loyal customer for many years but after this incident, never again. I will also be advising my friends how Whirlpool has treated me. I am very disappointed with your customer service or should I say lack of customer service. I was told that had I said that the water heater was leaking, I would have been given an authorization number immediately! I still do not have any hot water as I sit here typing this complaint. I am sure that Whirlpool is really concerned as you have my phone number and address and your representatives are aware that I am very upset but still no one has even tried to help me other than telling me that I have to trouble shoot the problem. As far as your rating go with me you get an F!

I have the model FG1H5040T3NOV water heater and had found this message board. I called the number posted by Chris with American Water Heater and provided them with my serial number. They shipped me the replacement assembly next day and after about an hour, I had it installed and working again. Im not too happy with the fact that it failed, but it does appear they have their act together in getting the replacement parts distributed.Based on the discussion with the person on the phone, my only real gripe is this: the cause of the component failure was potentially caused by a dirty-flame trap that supposedly needs to be cleaned regularly. Since the trap is underneath the water heater and is in no way really accessible, relying on people to see the fine print in the manual (which hardly anyone reads) isnt sufficient. At an absolute minimum, a very clear and apparent sticker should be included on all water heaters indicating this needs to be cleaned and a clear description of how to clean it properly to prevent this sort of unnecessary headache in the future.

Purchased water heater in 2005 with a lifetime warranty. We had our first problem May 30, 2013. Water would not heat above lukewarm. Called Whirlpool. Our plumber and Whirlpool determined that the temp sensor was defective. Plumber took it off and it appeared it had shorted out as the wires were black and plastic coating had slightly melted in one spot. We had replacement part in 24 hours. Licensed Plumber did repair (2 hours @ $75/hr = $150). Second problem occurred October 23, 2013. Not even 5 months later! No hot water. Hit reset button, turned temp up. No change. The diagnostic light on water heater indicated it was the same problem as before. Called Whirlpool. They sent out repair part which arrived in 24 hours. Licensed Plumber repaired (1.5 hours @ $75/hour = $112.50).I took a picture of the melted plastic caps where the wires screw into, of the housing around the wires, of the melted, charcoal crispy black of the Junction Box in the area that was directly above and covered the wires and sensor panel. It was much worse than last time. Plumber said that the part that screwed into the plastic cap had to be pried out and it broke off. You could see that this might be the spot where the problem started. We feel fortunate that we didnt have an electrical fire start from this problem. Something isnt right. Within less than 5 months, we have spent $262.50 to repair a water heater that has a lifetime warranty. Id like to give this 0 stars. Whirlpool owes us $262.50 and it might be more before this is all said and done.

I purchased my refrigerator four years ago from Lowes. From the second year ice would form in the bottom of the freezer weekly. This past week it stopped working totally. I had to call a repairman. He advised me the parts he had to replace were outdated and Whirlpool had made changes to the my refrigerator model two years ago. No recall. Just cheap parts that caused the refrigerator to not defrost. $400 later all is well and I am broke. I wrote to Whirlpool and their response was, Oh well, there was never a recall so youre SOL.

I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

Bought in 2009 brand new set washer and dryer together at Best Buy. The washing machine in 2011 started its never ending problems. I’ve paid for parts & labor for the door lock sensor mechanism multiple times where I learned to repair that myself even buying parts and installing on my own last time... Then a drain pump went bad. Replaced that. Now a code f51 sensor to a motor rotor not spinning issue. Horrible. All the money and time in this unreliable machine is so awful. This thing also isn’t that great when it works too. Goes unlevel way too much having to redistribute and restart cycles all the time... Wish it washed better for the price and all the trouble. It is the worst machine. Has to be! Everyone I know can’t believe the fight I’ve had through the years with this machine. The company doesnt help you. Costly headache Junk machine!

I live in Florida and in December 2012, purchased a Whirlpool upright freezer from my local Badcocks. About two months after the purchase it started making this weird loud sound. I contacted Whirlpool and they sent a local appliance company technician out to check it. The technician ripped my brand new Linoleum floor when pulling out the freezer. The result was, in his opinion, nothing was wrong with it, that the loud sound was normal. As it continued, another tech came out and his opinion was it needed a new compressor. So, it was replaced and lasted about a month. I was getting something out for dinner and noticed everything in my freezer was unthawed... all that money wasted a freezer full of food gone. So, Whirlpool once again sent the same appliance company out but a different technician. This one said it that he needed to order parts which he did, a different tech came out to install the parts and told us he didnt know what they were for and our freezer didnt need the parts the previous tech ordered. So this tech put dye in the lines and left. The dye leaked out from under my freezer all over the floor which is now stained because of the dye that leaked. This is the brand new floor they had already ripped during the first service call. So, now not only is my floor ripped but stained as well.Once again, about a month later, I find my freezer full of meat unthawed a third time. Once again I called and find out they have dropped the contract with the company that came out the first two times. So they refer me to another local appliance repair, and this new tech says that it needs a new compressor. This will be the second new one in less than 6 months. They order that part and repair the freezer; this fix lasted for about three months this time. On my fourth call to Whirlpool, I expressed my frustration with losing my food and the hassle of an inferior product purchased brand new under warranty. I definitely was not satisfied with the service and the customer service representative could not find my warranty record. He was also very rude and when he finally found my record, he told me I was no longer under Whirlpool warranty. This was wrong as I have my paperwork showing date of purchase AND the four-year extended warranty we purchased as well. I asked him what they would do for me since their inferior appliance and incompetent repair technicians cost me hundreds of dollars of ruined meat and other frozen food. He said they would do nothing except have another repair tech come out. Until the freezer is determined to be unrepairable that is all they can do.So I scheduled the tech to come out the fourth time and he found that some untrained tech had put oil in the line and the lines and compressor has to be replaced and flushed. I have already not had a freezer for a week waiting for tech to come out and now the parts are put on back order for another three weeks. The fourth repair tech called Whirlpool from my home, while I was standing there, and told them that it basically is beyond repair because of the price of parts and labor. He told Whirlpool it would be cheaper to replace the freezer but Whirlpool told the tech to replace the lines and compressor and flush everything out. So three weeks later, he comes back out on 10/13/2013 to make the repairs. I bought this freezer in December 2012 for $1200 and have been dealing with issues on and off since Feb. 2013 and now its 11/29/13 and once again my freezer has stopped working. I have lost all my food because Whirlpool sold me a defective appliance and would not make it right. I have asked them to replace it and they wouldnt. My husband and I have just purchased our second house and we were very excited about the remodel coming up in the kitchen. We were going to purchase stainless steel Whirlpool appliances, but after this company has treated me so badly, I will not buy anything with the Whirlpool name for our stove, dishwasher, microwave and refrigerator.We probably would have spent about $3500 on appliances, but we will purchase a different brand and give our $3500 to a company that will treat me better as a customer .I used to have trust in this company because it is well known for quality products, but I dont trust them anymore. I will advise any of my loved ones and friends not to purchase any Whirlpool appliance because of the inferior quality and lack of interest in making this situation right. I tried for almost a year and gave them 5 opportunities to do the right thing and now Im done. They dont care about the customer and that is a shame because they have lost a valued customer. As of now I have another tech coming Tuesday b/c my freezer is sitting not running again. Model #EV201NZTQ02.

A little over one year ago, I bought this model from Lowes. Shortly after installation, the ceramic coating on the floor of the bottom oven cracked and shattered. I contacted Lowes... No help whatsoever. I then fought with Whirlpool for weeks until they agreed to replace the unit. Seven months later, the floor of the bottom oven, once again, cracked and shattered. I am now in another dogfight with Whirlpool. This appliance is garbage and Whirlpool does not stand by their product. Do not buy any Double Ovens from Whirlpool. My next step is to organize a class action lawsuit.

We have a Whirlpool Cabrio mod. WTW5600 XW2, ser. C12830447 he... H2O.. low wash system. Less than two years old. It does not get clothes or towels clean. I put 2 jackets in on bulky items and part of one of the jackets was still dry. They were two small childrens jackets. My husband and I wash as long as possible and on hot wash (which is not hot!). Should not take 70+ minutes to try & get normal clothes clean!Now the softener is draining into the wash with the detergent. Another service call. Learned you can only fill the softened bin half full or less. WHAT??? Our extended warranty is up soon and not sure what to do. We would like to get rid of this pile of junk but cant afford another washer bill. Also wouldnt want anyone else to get stuck with it. Its a shame a company cant put out #1 good product and #2 stand behind it. Bring all of the company production back to the USA or put out a better product and stop worshiping the almighty dollar. Im done with Whirlpool (which was the product to buy), but stuck with this washer for now until we are sure that the brand we buy performs as it should. What happened to the PRIDE in & RESPONSIBILITY of making a good product and standing by what youve made. As my hubby has said, if you have to buy an extended warranty, whats wrong with your product! Again worshiping the almighty dollar or is it you just dont care about the people who buy your product or its quality. Maybe both.P.S. Have contact you before without a response.

We purchased a WRF989SDAM03 model French door refrigerator in September. A month later it began to make grinding noises when running. The noises got louder until it sounded like a car idling. We called for service, and the technician diagnosed a failing compressor. They replaced the compressor with some difficulty. Three days later we lost cooling. They replaced the compressor again. Now the refrigerator cools, but it runs 100% of the time. I dont mean frequently, I mean it NEVER. SHUTS. OFF. Its never not running. Today a technician came out, and after 1.5 hrs of diagnostics on the phone with a Whirlpool engineer, theyve declared that it works. Whirlpool refuses to honor their warranty and says that because the unit cools, I should accept that it runs 100% of the time. I can get no resolution from Whirlpool.

My top loading Whirlpool washer model WTW57ESVW1 failed after just over two years. When I called my service man, he turned it on and immediately told me it was not worth fixing as the transmission was bad and this model was known for this issue. I contacted Whirlpool Corp. and the person on the phone stated she could do nothing for me. I asked for a supervisor and was told she would give me a discount on parts, but I had to find out just what part it would be before she would tell me what percentage of a discount she could give me and the service call was my responsibility. Due to this treatment, I will not buy another Whirlpool nor will I recommend it to any of my friends. I will also post on Facebook my experience with Whirlpool.

We purchased a new Cabrio top loading washer in June of 2011 to replace a Maytag Neptune (thinking at the time that wed gone as low as possible). We didnt abuse the machine. In fact, because it had a tempered glass lid (in a plastic frame), we were careful with the lid on the machine. It broke during a wash cycle. Because its heavy, the lid has spring supports on both sides; these are stronger than the plastic frame and over time the frame will break, rendering the machine inoperable. The discounted price for a new lid is over $200, and Maytag (I mean Whirlpool) tells us that it lasted through the 365 day warranty, so the bill is on us. It may be green when it works, but taking 18 month appliances to the landfill is not very green. And others on the web report say that the lid only lasts a year or so. The ratings scale needs to have negative values. Id give this appliance a -5.

It has performed perfectly for the past eight or nine years. Only problem has been little plastic parts broke that held one big drawer that we may have overloaded. Door shelf plastic part holding it on... broke also.

November 4, 2017 we purchased a 2018 Tiffin RV with a Whirlpool 3-door refrigerator/freezer. We did not use the RV refrigerator until our first trip to Florida January 2018. Immediate problems with the freezer icing up on freezer door and icing up in the top 2 shelves of refrigerator. Milk, fruit, even cheese froze in the top of the refrigerator. Bottom freezer door froze so bad I had to yank on the drawer very hard to even get it open & chunks of ice would fall off the door on the floor outside once it opened. Called Whirlpool warranty service phone number two times 2/16/2018. I wont go into all the details but we were on hold for a 90 minutes and were transferred 7 times by the automated system. Talked to one person, Lindsey, who immediately transferred me again to RV Dept. No one ever answered. System kept saying, Please wait. Then just disconnected and another recording came on saying to call back. We did not after this fiasco! February 19, 2018 we called Tiffin MH & told them about the NO CUSTOMER SERVICE from Whirlpool. They told us to call Sears in Sebring, FL. We did. If we wanted Whirlpool service to bring the motorhome to them & the warranty only covered parts NOT labor or service calls. They did not want to work on it. March 13, 2018 We went to Tiffin MH Service in Red Bay, AL. Earl called Whirlpool tech, Steve, & tried to explain the problem. Steve told him he did not talk on speaker phone & told him very hatefully to put him on the private line. Steve just very angrily insisting that Earl had him on speaker phone. I do not understand Whirlpools Steve issue with being on speaker phone? Finally Earl got him to listen to our refrigerator problems as he stood there at the refrigerator going through each issue step-by-step. Steve said to put silicon in the seal & that Whirlpool WOULD NOT replace a 3 month old refrigerator that actually had only been used 2 months. We found out later Tiffin is going to replace the refrigerator.

I bought a Whirlpool larder fridge 18 months ago. It suddenly stopped working so we got a service engineer up who said there was no gas. He said it would cost 50.00, but with no guarantee it would work afterwards.

My first washer a Sears Kenmore lasted us 25 years before giving it to our son who used it for another 10 years. This machine is compatible with that one. Both are simple with a few of bells and whistles. That is remarkable in todays gotta have all of the fancy gadgets mindset. The Whirlpool machine does a very good job of washing clothing...period!

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

I purchased a Whirlpool refrigerator for my condo in February of 2012. During the past six months it started to freeze everything in the food compartment, and then during this past month the freezer started to slowly die. Ice cream became soup. After calling repair and examination it appears the fridge has basically died and it would have cost me over $500 to fix a $570 refrigerator. That type of lifespan is unacceptable. Before energy efficiency demands from the government, refrigerators lasted much longer. In the 50s, 60s, the refrigerator my parents owed lasted nearly 30 years. Am I expecting too much? Apparently so. I went out and purchased a Frigidaire this time. Hopefully, Ill get a few more years out of that one (Not happy).

Pulled a track home water heater out to replace with a Whirlpool 12 year smart heater. Well within 4 years with tank flush every year the water coming out of my hot water tap looks like mud. We have whole house water filters and when you drain the sink there is a layer of rust. I called and asked them what I should do and they told me to flush it with apple vinegar. Did this but a week later it was back. Called again and was told to do it three times with apple vinegar. There was nothing about this in the care manual about apple vinegar. I will never buy Whirlpool again NEVER!

I bought a front loading Whirlpool washer a few years ago after having my old top loading Kenmore for 25 years. It seemed okay, but I did always have to leave the front door open and it always smelled musty, which was of some concern. My clothes never smell totally fresh. The biggest current problem is that several months ago it started with a failure code, alternately would stop without draining, wouldnt fill, or wouldnt drain, and ultimately ended up flooding my basement. So we called for service and they replaced a sensor and said these machines seem to have a lot of service issues with sensors blowing and motors dying. So I paid them that time. Now its a month or two later, failure code again, calling for service one more time. But if it costs too much I will join the legions of dissatisfied Whirlpool customers and will switch to an upright competitors brand.

Bought this unit for our daughter that lives in a apartment building. She loves it and keeping her cool at night.

I love my Whirlpool Washing machine. Purchased it 2 yrs ago & have not had any issues. Its quiet, large capacity. Washes my clothes very clean. The various washing cycles makes it so convenient to wash as much or as little as I need on any occasion. I do recommend to anyone that you do the cleaning cycle on these new washers to ensure top performance when washing.

I purchased my Whirlpool Double-Oven one year ago and couldnt wait to use my new oven. I was told it was so efficient because I could use the top oven for quick baking instead of heating the entire oven (plus I could set it at different temperature settings). About a month in, I cooked 2 pizzas side by side. The first one burnt to a crisp and the one right beside it was doughy on top and burnt on the bottom. Not thinking, I blamed the pizzas! I also blamed myself, thinking it was me not being used to the stove.A few weeks later, I baked cupcakes. About 15 minutes in, I smelled burning and the cupcakes were raw on top and burnt black on the bottom. I called Whirlpool and they sent a technician out and he replaced the circuit board/clock. Worked for a couple of weeks and then the burning began again. Called Whirlpool again - another technician came out and adjusted the temperature. Here I am again, had to call Whirlpool again.This stove has been so inconsistent and Im so tired of wasting food because of this stove. My 4-year old Whirlpool dryer also went out last week so needless to say, Im not very fond of Whirlpool right now! If you are planning on buying a Whirlpool product, buyer beware and I hope you have a lot of patience...

Whirlpool Cabrio top load washer: nice job Whirlpool! You designed a washer that breaks if you accidentally wash a coin! For the second time in a few months, were fixing our washer because a coin was in a pocket. The coin gets sucked into the discharge pump and sounds like popcorn popping when it drains. It rattles around the inside of the machine’s pump until it breaks the plastic pump housing. You will know when this happens because there will be water on your floor. Did you ever consider a screen to prevent a coin from ruining the washer? God forbid someone leaves a coin in their pocket. Well, if you leave a coin in your pocket and wash your jeans, it will cost you a repair every time with this hunk of junk. This would be my last Whirlpool. It will actually be cheaper to throw this thing out and buy a new one, since it won’t be the last time a coin accidentally makes it into the washer.

Whirlpool model WRF560SMYB04 - We purchased this model Whirlpool in Dec 2015 after having a refrigerator for 18 years with no problems. We started having cooling issues in late 2017 and finally an intolerable fan noise in April 2018. Researched it and purchased a fan. Opened up the freezer panel and found that the unit was completely frosted up to the point where ice had formed around the freezer fan and was hitting the blades. Contacted a repairman who came out and called in the issue to the Whirlpool tech line. He was told that he should check continuity on a couple of wires. If these checked out, the problem was the user interface board at the top of the refrigerator. We purchased a new board for about $100 and installed same. No change. I was now $250 into repairs and no further. We became aware of Whirlpool Service Pointer W10875533A which described conditions that we were experiencing. The issue was a coil thermistor that would corrode (apparently within 2 years) and would not provide accurate signals. Whirlpool also issued an instruction sheet W10902213 Rev A describing how to relocate the thermistor and protect it with foil and tape. My repairman came out, confirmed the thermistor ($54) was bad, replaced same following the Instruction Sheet. We were now out over $300 on a $1000 refrigerator purchased 2 years earlier.Whirlpool issued the Service Pointer (not to consumers, but to repair shops) in Sept 2016 (within our warranty period). We received no notifications from Whirlpool of the defective design. Nor did we receive a recall notice. Moreover, Whirlpool tech group must have known about this issue, but instructed my repairman to replace the interface board. Whirlpool knows they have a defective product out there but are doing nothing to inform the consumer or stepping up to correct the problem. We have contacted Whirlpool to recover our expenses...will let you all know how that goes. Anybody interested in pursuing a class action?

My Whirlpool refrigerator, model number ET8MHJKXM005, constantly leaks water into the bottom inside of the refrigerator. Its only 4 years old, for crying out loud! I have a repairman coming over in a few days who tells me the newer Whirlpool refrigerators are notorious for having the drain ice up. Why would Whirlpool design such garbage? They should all be recalled.

I purchased dishwasher model #GU2800XTVT0 in May of 2009. Today, it leaked water all over and damaged my floor. My husband pulled the dishwasher out of the cabinet and found that the motor had fallen off. It did not have a bracket to hold it in place and worked loose, which then disconnected a hose. I called the customer service but they wont do anything because it is beyond the 12 month warranty. It only lasted slightly more than two years. This is obviously a manufacturing defect and we were just unlucky enough that it failed after the warranty had expired. The most ironic thing is that my husband worked for Whirlpool for 20 years. There is no loyalty here.

The washer began to start making noises as if coins were in it or plastic breaking every time I wash. Also, it does not wring clothes out good and clean well. I have Whirlpool Cabrio.

My Whirlpool French Door refrigerator will have its TWO year old birthday on September 15, 2015.. only if it lives that long! On August 8, one month and one week short of its 2nd birthday the compressor died. Of course the manufacturers warranty expired after one year. Thankfully, I purchased an extended warranty through the retailer. While this will cover my repairs, there is nothing that will cover the hundreds of dollars worth of spoiled frozen and refrigerated products which had to be discarded. I will NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT!

I will make this short. If there was a part that could break on my Whirlpool fridge, it broke. Whirlpools 3rd party repair company (Flamingo Appliance Services, who are awful themselves) was at my home countless times. This last time, they were replacing the same malfunctioning part for the THIRD TIME. The Flamingo technician (Nicholas) insured me that the issues were not related, despite the same exact part being replaced 3 times. I told him that I believed that was a dishonest statement, and he left the fridge un-repaired. Now Whirlpool nor Flamingo will help, and I am stuck with a non-functional fridge, and small children at home. Whirlpool and Flamingo represent everything I despise, have zero integrity, and are a reading on the barometer of where our country is headed.

I am thoroughly disgusted with Whirlpool. How dare they sell the garbage that they put out? I didnt buy the extended warranty when I bought my Whirlpool washer and dryer. Why should I when I put out all the money that I did? I havent had the product three years and had to have a repairman out to fix. And then the parts are so expensive, and they are cheap Chinese junk. I dont understand how something with a name like Whirlpool can put out such a disappointing product. Never again will I purchase your product. And I certainly will spread the word. Greed comes to mind for me. I see you have contributed much money to campaign (Republican). Have you ever thought about what you do to yourself? How absolutely disgusting you are.

I absolutely HATE my Cabrio washer/dryer. I cannot get the mold smell out of my clothes. The clothes come out dirty and smelly. I have no idea what to do about it. It was a huge sacrifice to purchase these and a complete waste of my money. Whirlpool - please stand behind your products and take it back! Worst purchase Ive made in years.

I also have the same water running into the refrigerator problem that so many people have reported. Im about to throw the Whirlpool out and start over. It is such poor business that whirlpool wont admit that the appliance has a major problem and fess up to correcting it for owners. I will never buy another Whirlpool appliance and will warn everyone to also steer clear of Whirlpool.

Whirlpool Cabria Washing Machine hold down switched failed in just 18 months of use. It took the Technician 5 days to serviced and repair our Whirlpool top loading washing machine. The washer is till acting up and stop working unless you put a weight on the top loader cover.

I purchased a Whirlpool washing machine from PC Richards in Lake Grove 15 months ago. I paid $590.00. I had to call PC Richards back because it sounded like the machine was not spinning right. The servicemen came back and said nothing was wrong. It was supposed to sound like that. Now the machine stopped draining and spinning. I went to the store and they handed me customer service numbers and said they could not help me. I contacted Whirlpool online and received a phone call from a woman that gave me a lesson on how to load the machine and put soap in it! She was a very polite woman, but, gee, that didn’t solve my problem.After 4 days I was able to get through by phone and was told to call service. I contacted Mahler Appliance. He looked at it and said he couldn’t fix it and took a check for $81.47. He told me to call Whirlpool. I called Whirlpool again and got their service people. The gentleman came and could not figure out what was wrong. He tried a few things and said it was probably the main board. He said to call Whirlpool, but they most likely won’t give me back my money. He could charge me $460.00 for a new board per his supervisor. I just paid $590.00 for the machine and another $87.00 to some guy who took advantage. He left with an $87.00 check and I still have a broken washer. He did tighten up a loose wire he said he found and told me to try it and good luck. So I tried it. I put clothes in and turned it on.I came back about 20 minutes later to see if it continued to run and I slipped and fell on the ceramic floor because water drained out from somewhere and went all over my floor. I have injured my back and elbow from hitting the hard floor. I also have water all over the place and finally a very broken defective washer. I am angry. I hurt myself and have spent close to $1000.00 and I still have no working washer and no way to buy another one. The washer is 15 months old. That’s brand new to me. There was obviously a problem from the beginning. Whirlpool has always had a quality name for years. I would hope that they would stand by their product and fix my washer for me. It is obviously defective.

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.

Do not buy a Whirlpool fridge unless you like the sound of knocking every time it starts up. This has been fixed twice to no avail. I read about this before buying but thought it was an exception when it happened. Not so, it will happen to you & their fix will not work. Beware & heed this advice from someone who didn’t & not has major regrets. There are many other brands, buy them.

No get this and the dryer used. Top of the line. I am having fun seeing all the choices. I would recommend because of the efficiency. Measures soap and softener depending on the load size. Like a miracle.

After just 2 years, the electronic control board failed. The temperatures are stuck on the coldest/high mode for both the freezer and the refrigerator, spoiling some foods. The parts and repair are going to be $300. Whirlpool will not replace the defective part or pay for any repairs. Shame on Whirlpool! Model No. GB2FHDYWQ01.

I purchased a Whirlpool gas top range from Lowes in Somerset Ky September 2013. Model number WFG524SLAB1. The surface is showing bubbles. I contacted Whirlpool and they gave some kind of story. In other words I am stuck with it. Still under warranty but they wont send someone out to look at it. Lowes told us that it could be a paint defect when it was made. If the top starts peeling, it will be a real mess. I have never used anything abrasive on the stove top. As of right now I am not happy with Whirlpool at all and if they dont do something about this, I will never buy another one of their appliances.

The Whirlpool Cabrio washer was extremely expensive to purchase but is rusting out and the circuit board is going out. We have had cheap washers last longer than this one and just to purchase the circuit board will be more expensive than another cheap washer. These boards go out right after the warranty goes out and I think that they are timed to go out. (The exact same thing happened with our dishwasher and after the board was replaced, it has lasted many years). Whirlpool should replace these for free since they do not last that long and are very expensive.

Bought a model WRT318FZDW02 (top freezer) refrigerator (new) about 3 1/2 years ago and its already failing. The temperature regulation has failed and food in the lower compartment freezes while the temperature in the freezer compartment varies wildly. Unfortunately typical repair costs these days will probably make this a throw away item. Ive owned several different refrigerators over the years and theyve all lasted well beyond 10 years. I definitely cant recommend buying anything from Whirlpool these days.

Had the washer 3 years. After 1st year had to replace motherboard and lid locking mechanism. Beginning of year 3 the basket came loose, the machine wouldnt spin the water out of the clothes completely and then it quit cycling into the next cycle, ie, the tub filled up with water for the wash cycle but then would not begin agitating. The water sat in the tub until the wash cycle was done and then would drain but would not spin. Each cycle had to be manually started by pressing the pause button, raising the washer lid, and then pressing the pause button again. I called a repair person who ran a diagnostic on the machine and said it needed a new pump, new motherboard again and something else to make it spin properly. Sorry I dont remember what the something is. The estimate to repair was approximately $759 so I am now shopping for a new machine thats not a Whirlpool.

My Whirlpool dishwasher is 11 years old and has performed satisfactorily throughout. The utensil container is in the door, saving room inside but making it a bit less convenient to remove. The results are satisfactory, but I carefully rinse everything before putting it in the dishwasher. I dont believe dishes with hardened food would come out clean without this step.

I purchased a Whirlpool Cabrio and a one year extended warranty two years ago. As soon as my warranty ended, my washer started to malfunction. I recently started to receive the F-51 code and the washer shuts down at the spin cycle. I am angry because I spent just under 1200 dollars on a washer a little bit over two years ago and now, it is sitting in my laundry room taking up space. When I called Whirlpool, they told me I could purchase another repair warranty for $316.94, which would take the cost over 1500 dollars for this washer and there was no empathy nor compassion for what I was feeling as a consumer from the customer service rep. I spent my hard-earned money on major appliance purchase and I think that it is only fair that I get more than a two year usage out of machine that was designed to last at least six years according to their website. There is no way that this should just be my lost and cost me additional funds.