Two years ago, we purchased a Whirlpool Cabrio Washing Machine from Sears. All of a sudden, it was making sounds in the spin cycle that sounded like a jet airplane taking off. It was terribly loud. We called repair technician, which cost $90, only to find out that the bearing is gone and its going to cost over $500 to fix it. This is absolutely ridiculous! We expected it to last several years, only to find out that we would have to spend almost as much as the washer originally cost in order to fix it. We paid $700 for this machine, two years ago, and I can say that Ive never been more disappointed with a product in my life. My previous washer lasted thirteen years, not to mention my dryer and stove fifteen years, with minimal repairs. I will never buy another Whirlpool appliance again. I have read some other complaints on this consumer affairs website, as well as other sites, regarding this same washer with the same problem on the bearing and cost to repair. If anything, I think Whirlpool should make good on this product and offer something regarding a recall or payment for repair in some form. As far as Im concerned, I will alert everyone I know about Whirlpool appliances and advise them not to purchase it. Now, I either have to pay over $500 to repair my washer or go buy another one. I do not even want this Whirlpool appliance in my house when I can get a washer for cheaper than the cost to repair it.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

We bought the set washer/ drier from Lowes in 2008. The first problem was that it wasnt rinsing well. After finishing the washing cycle, clothes were still dripping water. It took us to make several phones calls to get the problem solved. Also, the clothes were smelling bad and needed to be wash again. Now we are having another situation that it start the wash cycle but it wont finish and shows a code F35 or sud.

Cabrio Whirlpool washer - I hate this washer. Had it for about 3 years now and it will not spin out and does not give a code. Called a service tech out and they cannot find anything wrong with it. The water goes out but will not spin. It sits on 20 minutes and does nothing. Will not buy another Whirlpool washer. Wanted a good washer and got a piece of junk. Will not recommend it to anyone else. Think Im going back to the old style.

On its 1st year, the water pump went out. It cost $200.00 to replace it. On its 2nd year, the circuit board went out, and it took $300.00+ to replace it. On its 5th year, the bearings went out and cost $250.00 to replace it. I bought this for $900.00, and I already have paid $750.00 plus the price of purchase which makes this washer $1,600.00. Whirlpool should compensate all of us who have worked hard and have purchased this product! I will never purchase from Whirlpool again. I can’t afford them. I should get a refund from Whirlpool. Don’t they care? Email me for these problems at **. I am so dissatisfied with this product.

I had this stove for less than 3 months and the glass top broke after turning on the stove. Now I tried to find out how to purchase a replacement but it cost as much as a new stove....Ughhhh this is so aggravating.

Whirlpool Gold Fridge Model GR2SHWXP002 purchased on August 15, 2007 for $1,368.77. Only repair issue so far was water leaking from the Water Inlet Valve Item # 949403. I bought a new part on Aug 8, 2011 for $73.45 and replaced it myself. The plastics on the fridge door have yellowed. No smoking in the house so not sure why the plastic has changed colour??? Would I buy one again?? Yes I love the water through the door feature and the automatic ice maker. 10 years old now and no major problems.

Whirlpool built-in electric oven self-cleaning (model # GBS307PRS01) has a problem with self-cleaning. Every time you use the self-cleaning feature, the thermal fuse switch and thermostat burn up. This has happened on the two occasions when the self cleaning feature was used. The only thing that Whirlpool will tell you is that there is no recall on that model.

We bought a gas Whirlpool Stove from Lowes. We noticed it was not heating like our last stove and thought maybe because it was new. No the stove does not heat properly at all. I cooked a pork loin for 40 minutes at 350 and it was still raw in the middle. I have had to cook everything on 375 which makes the door handles and knobs very hot. I called Lowes and they patched me into Whirlpool after a 45 minute wait. The rep from Whirlpool said, you can look at the manual and figure out how to calibrate it. No I cant. I have a warranty that is what it is suppose to cover. Then I was on hold for another 20 minutes. Really no one should tell you to read a manual to fix a gas stove. I will not buy another Whirlpool item. Poor customer service and that make you feel you are bothering them.

We purchased our refrigerator about five years ago and we have dealt with it freezing up constantly. The coals and vent are at the bottom of the refrigerator. I believe that is a lot of the problem. We have continuously blowed off the coals to keep it from freezing up but sometimes its still freezes up. I do not recommend the two-sided door Whirlpool refrigerator.

Whirlpool Cabrio - Worst washing machine I have ever had. Unbalanced when washing sheets, towels. It does not matter if one sheet or two. I will never buy another one like this again. I would be better off having a twin tub for the amount of time I spend in the laundry to fix this machine when it bangs, bangs because it is unbalanced. HATE, HATE, HATE it.

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

In all of my 50 years of marriage and buying stoves, I have never had an oven breakdown. I live in Canada - I purchased three appliances, all Whirlpool 2 years ago. I had to have a service call on the fridge three weeks ago - a little rubber nipple was clogged up and water was running into my freezer. Bill $100.00 - two weeks ago, the broil element in my stove would not turn off when the bake cycle heated up. Actually, you did not have to press the fast heat button as the broil came on by itself. I have been waiting almost two weeks for the part - today I was told it would be another week. The part has to come from the US - what ever happened to Whirlpool Canada???? - I am told the bill will be $350.00 and maybe more plus the service call. I do not find this acceptable. What do you do when you have already invested the money in the product. Bring back the old Moffat stoves. I would like to be reimbursed for the money I have put out and will put out.

Whirlpool water heater FG1F5040T3NOV - I noticed that when I was taking a shower, my hot water wasnt working. I went downstairs and the pilot light on my water heater wasnt on. I tried to restart it. The pilot light wouldnt work or relight. I gave up and contacted a plumber. I dont feel I should have to pay for a plumber when its a product flaw!

From the very beginning the washing machine did not clean the load. It doesnt even get the load completely wet. The best you can hope for is to utilize lots of fabric softeners to at the least make your clothes smell clean because they surely wont be. Dont even get me started on the load lock feature because it serves no purpose other than to drive you batty. When your 15 year old son offers to give you money to buy a new washer after owning the one you just bought there is nothing I could say more profound than that. How Whirlpool stays in business befuddles the mind.

The AquaLift self clean is a joke! Doesnt clean at all! Has to be consumer fraud, calling it a self clean. Ive owned electric self clean ranges for 40 years, that did great jobs. This does zip for cleaning! Unbelievable! Should be a rating below 1 star!

I purchased this washer and at the same time had gotten a puppy, I only mention the puppy because she is the one who kept getting blamed for what was happening to my clothes. I NEVER thought that it was my washing machine that was ruining my clothing, until I finally opened the door one day and my shirt was hanging from the top of the washer opening, and suddenly it all made sense! I kept thinking that the puppy was chewing my clothes but it is actually the washer that is sucking my clothing into the opening of the washer and when it gets stuck and the rest of the garment keeps spinning, it creates a burn in the clothing. I found out the hard way that Whirlpool will just blame the consumer for not knowing how to properly follow washing instructions, or their instructions, and will not take any sort of responsibility for it being the washer itself! I wrote to them after my father passed away and I washed his sweater in the washer and it got caught in the washer and ruined it. They blamed me for it and basically said I did not follow the proper washing instructions. I have been washing clothes for over 20 years and I know how to do laundry. I have read every inch of the owners manual and NOTHING tells you that during the wash cycle, your clothes may become sucked into the opening and ruined! So I went online to see if this was happening to anyone else and I was amazed at how many people this is actually happening to! There should have been a recall on these washers and I am amazed there has not been some sort of class action lawsuit.

We have purchased 2 Whirlpool dishwashers in 4 years. The first one lasted almost three years and the second just past the warranty. The second one was a $500 dishwasher that we bought new. We filed a claim with Whirlpool and then had to set aside a whole day for the repair person to come. They spent about 10 minutes at our house, charged us $75 and didnt even attempt to look at the dishwasher or fix it. We have sunk almost $1000 into Whirlpool dishwashers since we bought our home 4 years ago. If you want to waste time and money go ahead and buy Whirlpool, otherwise learn from our mistake.

I am in construction and have had to deal with failed motherboards on new Whirlpool fridges that we put in some rental properties. Knowing that, when I went to buy a fridge for my own house, I went to a very reputable appliance company and talked openly about getting a fridge that wasnt going to be a problem. My sales agent and I go back always and he was very open about the problems with the more gadgeted Whirlpools so we picked a low bells and whistles French door fridge to avoid that. It stopped cooling at about the same age as all the rental units did and had a control panel fail. The sales guy and I laughed about how even knowing about the issues I didnt avoid it. Their company came out and fixed it for just short of 300 bucks.Two months later, it stopped cooling again. The service tech came out and this time hit the side of the fridge with his hand and opened a relay getting it to work, at least for another week. The tech told his boss that I must not have shut the freezer causing it to go into defrost mode. The third time it failed, we were out of town and lost all our perishables. We had the same tech come out and replace the board he got to work the last time with a whack to the side of the unit. That board should have been under a parts warranty for 90 days but I may have missed that with the slap repair working for the additional 2 weeks.Im trying to put this behind me but Whirlpool sent me an Extended Warranty Plan opportunity. I can now buy a plan on an almost 3-year old fridge. I am wondering if they are trying to give me the hook up on a bad product or just hoping to prey off my fears and cash in. The company I bought the appliance from has been first rate but their hands are tied by Whirlpool who has virtually no support for their vendors. Before buying a Whirlpool, consider a Sub-Zero. After you figure in the repairs, they arent too far apart in price.

Some years ago I bought a whirlpool water heater from Lowes and the thermocouple went out. No big deal, so I thought. I went to Lowes, picked up a new one and tried to replace it. It wouldnt thread even though the package stated it was for my model. I went back to Lowes and they gave me another one, same problem. So I called Whirlpool, they said it was a left handed thread and they discontinued it, but they could send me a conversion kit at my cost. So at that point I was 2 wks out so I paid for the kit. I received the same thing I bought from Lowes. I was so frustrated I ripped the thing out and got a new one. That was 2 yrs ago and now I am having the same problem. I called whirlpool and they want me to pay for the replacement part. Mind you, the heater has a 6-yr warranty. I went to Lowes and they wont replace it. They sell items that they dont stand behind. I will never buy another whirlpool item and I will never shop at Lowes again.

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

I purchased a washing machine in year 2002. It was working perfectly. Recently, its drive belt started slipping. I called local service center, S. R. Enterprises, with mobile number 9204792391.The technician came after 3 days and declared that the gear box is leaking and will have to be replaced. They had no gearbox in stock for model f45, top loading, fully automatic.After a wait, they took away the machine to their workshop on 30.09.2011 and returned it on 04.10.2011.They charged me Rs. 4,730. I will have to be replaced. I found that its LID, which was perfectly okay, is now making a terrible sound when opened and would fall down, not allowing to load the machine. I informed the service center immediately. After many reminders, a man turned up yesterday and declared that the LID will have to be replaced and I will have to pay Rs. 2,000 for that. I rang up the service center to say, Since it has been damaged in your workshop, you should replace it free of cost to me. Their reply was evasive and negative. I called your call center and they registered my complaint - customer number **, comp. number **. I was assured that the LID will be replaced within 24 hours.

We purchased our Cabrio washer and dryer in 2012. In 2014 we had to replace the rollers in the dryer. Since then it makes a loud clunking sound and it has to go through at least 2 or 3 dry cycles to dry the clothes, sometimes more. The washer lid lock doesnt work very well anymore. Sometimes it wont lock so I cant get the clothes washed. It takes forever to get it to work. Ill never buy Whirlpool again.

I find this to have perfect storage space both in the top for standard refrigerator and the bottom freezer. I would recommend this not for the style, the amount of room but also the quality. I have not been disappointed.

I have a Whirlpool suite. Stove is fine...refrigerator is awful. Froze all the food in fridge. Cost me 100’s to replace. Put in new thermostat. Now sounds like a freight train. Bought in April and the filter already needs to be replaced to the tune of $81.

The drip hose had to be replaced 6 months after I purchased the refrigerator. At that time the warranty covered the part but the technician told me that Whirlpool was aware of the problem. About 5 months after the warranty expired, the same problem again - ice built up on bottom of freezer and water leaking out from the left side leaving a puddle on the floor. I called Whirlpool and they said warranty is expired. I tried to tell them about the defective part but to no avail. Had to pay to have drip hose replaced again. One year after that the main CPU board went and had to be replaced ($350.00). I sent the part back to Whirlpool, registered mail, hoping they would respond with a yes, this was defective. Their response back to me was, “warranty is over.” For a main board to fail in a $1500.00 refrigerator in less than 3 years was uncalled for. Two days ago I noticed the puddle on the floor and had to call in a technician and ONCE again the drip hose had to be replaced ($160.0). He told me Whirlpool is well aware of the problem and there is a Service Pointer out on it and the code is S38211. Thanks for nothing Whirlpool. The refrigerator was a lemon and you did nothing about it. I wish I would have read these reviews first. No more Whirlpool products for me! PS. I was a dedicated fan of Whirlpool for 40 years!

We bought a new brand Whirlpool, ice berg, 2 door refrigerator in 2006. It worked fine for 6 months and then started giving all the problems. Until now, we have repaired it at least 10-15 times with company servicemen and also private repair shops. We are just so tired and frustrated will all that we have gone through because of this fridge. Today, the main door just came out and it is probably the 16th incident. We are hardworking people and take a lot pleasure and find lot of happiness in buying something new. It took us almost 2 years to save money for this new fridge with cost us about Rs. 20,000. But I should mention this that we have already more than Rs. 10,000 in repairs.I am sure this would just be another email in one of your inboxes but wanted to write this and convey the message that we are hurt. We do not want to take any legal actions as middle class men in India do not have the resources to do that. But I would surely not buy anything of your brand going forward and would not suggest anyone for it. Writing this in assumption that you understand the pain middle class men goes through to but something worth Rs. 20k and spends another Rs. 10k for repairs. We had high expectations from your product but that was not to be.Following were the problems we face in last 4 years: 1. Refrigerator not cooling (5-7 times); 2. Top door broken (1 time); 3. Main door broken (1 time); 4. Water leak problems (5-7 times). I hope someone will read this and forward it to concerned department.

Purchased a Whirlpool top loading washer. The agitation cycle is unreasonably loud. So loud you can hear it everywhere in my home and cannot have a conversation within about 30 feet of it. When I ran it for the first time I thought it was malfunctioning and when I called Whirlpool I thought they would send a technician to fix the problem but they told me that the sound was perfectly normal for high efficiency washers! My other high efficiency washers were very quiet. The fact that they think this type of noise is not only normal but quite acceptable makes me quite certain to never buy any of their products again. Very disappointed to see what once was a quality company to be so lame.

I purchased my washer about 1 month ago and I used daily. I went away for the weekend, and now it does not work. Washer will not wash, fill or spin, gives a LF error. All lines have been checked. I need to call service.

I’m getting the run around with service. No one comes to our area to check our new Whirlpool hot water heater. The hot water heater has not worked right since I installed it. I need a service tech to come to my house at Whirlpool’s expense and check the damn thing and get me taken care of. Does Whirlpool want to retain a customer or not? Its that simple. My cell phone number is **.

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

I purchased a new Whirlpool stove in Feb 2020. First off the oven was not calibrated right and Whirlpool wanted us to do all these tests to see what the problem was. Finally, after purchasing an oven thermometer I finally got my ducks in a row and called them back to which they finally sent out a repairman. Now after almost finishing supper last night the whole cooktop stopped working. It is going to take a week to get someone out to fix it. Also, we have to purchase an extended warranty for our Whirlpool refrigerator every year because it always needs something fixed. Our Whirlpool washer has been on the blink for quite some time (no warranty) and cant afford to get it fixed. When talking to someone at Whirlpool it appears they have no compassion. I guess it is because they are just paid employees. My recommendation is to look into other products before purchasing. Do your homework.

It never seems to clean the dishes and it runs for 3 1/2 hrs. It is suppose to have all these Features but does a very bad cleaning job. I have used liquid soap, the cascade pods and the jet dry, still gives very poor results. Use to have a Kitchenaid that lasted almost 30 years - great appliance...

Purchased a 450.00 Whirlpool over- the-range microwave oven in October 2015 and on January 4, 2017 it is not heating. Timer, light and turntable is working properly. I thought I was buying one of the best products. I was sadly mistaken. So I am a very disappointed senior citizen, is has a fixed income. I still have the receipt from my purchase from Lowes.

I had the junky gas water heater for two years and cant keep the thing lit. Calling Whirlpool does no good. They give you the runaround; the store cant do anything. They know they have a faulty product and keep selling it. Some companies are only out for the money. If that wasnt the case, they would discontinue the junk. They will send you replacement parts but if you know nothing about them, you have to put out more money for someone to come and fix it. I would love to send them the bill! I would not recommend this brand of anything to anyone.

I purchased a Whirlpool Duet HE front end loading washing machine. Less than two years after purchase, the machines tub and bearings failed amounting to a repair bill of $1035.00. Fortunately for me, or so I thought, I purchased an extended warranty for the machine. However, even though the complaint department was aware of the failure, the amount of the repair and the fact that I declined repair and was opting for the $500 reimbursement option, I was told that the claim, as it was called, would take 2-3 business days to process and if I was awarded (his words) the reimbursement, I could only use this money on a new machine at a Sears store and not on any new, but previous year model, or at a Sears outlet. None of these things were related to me when they took my $214.00 for the warranty. In all, my original washing machine of 22 months will have cost me $1414.00. My new washing machine, if awarded one, will cost approximately $400. The total cost to wash clothes for 10 months will exceed $1,800.00. Do not purchase Whirlpool front end loaders because the drum bearings will break (that is why they exclude them from extended warranties) and do not buy extended warranties as Sears makes out in the end.

I redid my kitchen two years ago. Put in Whirlpool appliances because they matched my refrigerator. I have been very happy with all aspects. It looks good, it’s easy to clean and cooks well. It doesn’t have a lot of special settings. Less to go wrong.

As very happy owners of a previous model of this fridge freezer when ours needed replacing, we went direct to Whirlpool and bought the latest model. What a mistake! Other comments on this site are so accurate if only we had seen them before. A kitchen floor covered in ice mush (cubes seem out of the question) and tepid water from the water dispenser whereas on the previous model it was chilled. Basic functions that the previous model excelled at. Sadly it is also badly designed inside the fridge. We raised these issues with Whirlpool within our first year who merely said sorry you are unhappy and thanks for your comments. Be very wary of Whirlpool products and service.

Whirpool Cabrio Washer - Do not buy this washer. Clothes are not clean. They are twisted with residue still trapped in the wadded up mess. Even if you select deep water clean, your clothes will still have the same dirty marks on them as when they went in. Also, there is no spin cycle. If youve got a bunch of wet towels you just want to spin the water out, you can forget it. You will have to do a complete wash. And the 1 star is not even appropriate but there is no choice of a big fat zero. Wasted a lot of money on this when Ive had great luck with Kenmore.

Purchased a Cabrio Top Loading Washer and Dryer 3 years ago from Lowes and our clothes have NEVER even come close to coming clean without spending a ton on stain removing aids, which only work part time. So I approached the salesperson at Lowes and I was informed (after the fact) that the Cabrio top loaders had poor ratings due to the fact the basket only spun 30 times a minute whereas the front loaders spun 300 times a minute. So after 3 years Im forced to bite the bullet and purchase another washer. Ever since they purchased Maytag, their quality control has gone down the crapper. Now Im going back to the old reliable, the agitator washer. Newer is not better in this case.

Aqualift Self Cleaning - JUNK! JUNK! JUNK! The oven does NOT heat properly and it is NOT self-cleaning. Whirlpool should be ashamed of itself. We ALL need a refund. Class Action suit looming. DO NOT BUY THIS PRODUCT!

I purchased Whirlpool dishwasher in March of 2011. In July of 2011, the stainless steel front started getting rust spots. Called Whirlpool and they sent a local repairman out. After 3 weeks, I called Whirlpool again and was told that the rust is cosmetic. I insisted that I have other appliances with stainless steel and they do not rust. Either they used a inferior grade of steel, or its not steel at all. They repeated it was cosmetic and they are unwilling to do anything about it.

We purchased the Whirlpool refrigerator on July 9, 2012. Refrigerator was replaced on August 23, 2012. Since then there have been many, many service calls. I wish I had kept records to be able to tell you exactly how many times, but we purchased an extended warranty. From memory, I can tell you the ice maker has been replaced twice, new doors have been installed for refrigerator and freezer (replacing ice maker a third time), then within the last three months the freezer door was again replaced (replacing ice maker a fourth time). The gasket on the freezer door has been replaced. At one point the refrigerator was colder and freezing and the freezer was not freezing. Parts and pieces have been repaired on several occasions. The inside of the freezer door next to the ice maker is still frosting up and yet again the ice maker is not functioning and needs to be replaced a fifth time. In other words this Whirlpool refrigerator has been a lemon for us. Finally, we figured it out. There is a fairly large gap at the top of the freezer door between the case and the gasket. If you run your hand across the area where the gap is, there is definitely a dip in the face of the refrigerator case where you can see the top of the ice maker. A picture showing the gap is attached. I am not sure that our purchasing a store extended warranty was fortunate or not. My husband has insisted on repairing this thing over and over and over because of the extended warranty. I think repairing it is futile and the only people being punished by all the repair calls is us because we frequently do not have ice, we are losing food because of freezing or not freezing or cooling or not cooling as the case may be. Thank God, the warranty expires in July and we can repair this Whirlpool by replacing it with another brand -- not in any way associated with Whirlpool. If you Google Whirlpool, you will find that Whirlpool is affiliated with almost every other brand of refrigerator and really limits your choices. Based on my experience with this Whirlpool refrigerator, I will never purchase another Whirlpool or any other brand associated with the Whirlpool brand. The myriad of repair persons in my home probably find a Whirlpool refrigerator is job security for them.

Rust started forming early on our washer and spread quickly. Our house is air conditioned and not near the ocean. There was no reason for the rust. Poor quality finishing is the only explanation. When I called to complain I got nowhere. I wish I could show a photo on this website. It would dissuade anyone from ever buying a whirlpool.

Whirlpool gold bottom freezer is 2 years old. This model has a design flaw. And due to this the drain is frozen in the bottom of the freezer. Water is leaking onto the floor. I called for service and whirlpool is charging me. To fix a problem that is their fault. This is unfair.

In open concept homes, manufacturers need to consider the refrigerator’s noise — ice makers included. We hear every single clink and buzz. We love (and prefer) the french door concept, but the freezer drawer, when it’s fully loaded, is difficult to open and close. Also, the stainless steel scratches WAY too easily.

DO NOT BUY THIS DISHWASHER (Whirlpool Gold Series dishwasher)!!! We bought a camp with this dishwasher in it brand new. It has been serviced three times in the past year because the dishes (especially utensils) do not dry. The service company first said it was because I needed to use jet dry. What a joke! I told them I was using jet dry so they sent a service man out. He had to read a manual in order to try and figure out what was wrong with it. He then decided the entire motherboard needed replacing and he would order the part. He came back, replaced the part and it still did not fix the problem.I called again to complain so they sent another service man out and he said the drying air vent may not be working. They came back out to replace it weeks later because the part was on back order. Wonder Why??? I still have to dry the utensils every time I run the dishwasher. The interior walls of the dishwasher are wet even after running through the drying cycle. Either this dishwasher is a lemon or Whirlpool is selling a dishwasher that does not dry to the consumers!!! So BEWARE!!!

I bought the front load washer 4 years ago. The tub bearing suddenly broke. We have 2 people in the house so the washer is not used more than 4 times a week. I was told it would cost $700.00 to repair. The washer was bought with a stackable dryer. Now Im told they no longer make a washer to go with the dryer. I called Whirlpool/Maytag and they could care less. The explanation I was given is that it is a man-made appliance. That is the worst customer service I have ever gotten. I would never recommend Maytag/Whirlpool. In fact I will highly discourage against it.

Purchased this washer in 2009 from Lowes, believing the hype that it was efficient. Since we only needed a Washer at the time, we overpaid (it is more cost effective when you buy both washer and dryer). So we paid $1000.00 for this machine (we purchased the stand as well). After the 1st year, there seemed to be a significant decrease in how fast the washer spun, as the clothes were coming out wetter. I didnt pay much attention, but 2 years later, the machine has a weird problem where it couldnt complete the cycle, and by this time, every time it Spun, the noise was louder and louder.I contact Whirlpool, placed a service call and the Technician came out. $225.00 later, there was a hose that was pinched that was sending a wrong signal to the washer. He fixed that and told me I should get a contract on the machine through Whirlpool since I seemed to be having problems. I purchased the contract, for $300.00, and 2 1/2 weeks later placed another service call, as the noise from the machine was happening every time I did laundry. The service guy came out, indicated that it seemed to be the Agitator, and that he would need to order parts, and that they had a SPECIALIST who only does this type of repair, since they have many! He also indicated that the hose may have crimped due to the movement of the entire agitator!Well, after not hearing from ANYONE for 2 weeks, I called the repair company who told me WHIRLPOOL was supposed to call and let me know that they would NOT fix the machine, as the parts cost more than the Washer, which is now valued at $500.00! No one from WHIRLPOOL EVER CALLED, and I cant understand how a $1000.00 Washing machine touted to be so efficient and environmentally friendly has been THROWN OUT after 3 years!!! And now I am out the $225.00 repair, have no washing machine, $1000.00 down the drain (and I forgot to mention a year later we bought the matching WHIRLPOOL DRYER and OVERPAID) and now have to purchase another machine, which I assure you WONT BE WHIRLPOOL! As most of us have experienced, WASHING MACHINES last for many years! The washer I had before this was over 20 years!!!! So much for efficient and environmentally friendly... The only thing GREEN about this machine is how much of my $$$ has gone to Whirlpool!

When you shell out the money for a new water heater you expect it to work the first time. Mine did not. Luke warm water was all that we could achieve. After going through the troubleshooting steps we could not clearly define the problem. So they ordered me the parts and sent them to me. The parts were for the old model control unit and does not mate up with the wiring that is in the unit. The representative was put back in that they had no idea how that happened. And, no wrench came with the thermostat just another thing to spend money on. I told them I have had it. Then they say that this is a manufacturers defect and they can provide me with a list of repair technicians in the area. I gave them one star because I could not give them zero. They should have lead off with the service technician. Still not repaired. I will keep you updated.

My front load washer doesn’t get my clothes clean. I have to rinse twice and still there is soap in my towels and they smell bad. I’ve followed all the tips without much luck. Now I use only Oxyclean and rinse with 1/4-1/8 c vinegar. The machine doesn’t pump all of the water out of the machine either. To me it is low-efficiency!

If I could give them zero stars I would. NEVER BUY A WHIRLPOOL GAS WATER HEATER! Our Whirlpool water heater Is 4 years old. Pilot light wont stay lit. A reputable plumber came out and said that the control knob is bad and to call Whirlpool to get part because its still under warranty. So I call and get nothing but a hassle. They tried to tell me that it was installed in a room that the installation manual says it not to be in. (Background here. The house was built in 1960. It is on a cement slab and its a prefab house.) The manual says Do not install in bathrooms, bedrooms or any OCCUPIED room normally kept closed. Now let me tell you where it is at. It is in a 5 by 3 boxed area with cement floor and walls to the ceiling with access doors to it and to the furnace which is also in this area. The access door to water heater is on the back side of a bedroom closet, access door to furnace is in a hall. So Whirlpool tells me that they cant give me the part Even if I pay for it due to some national fuel and gas code. They wont even tell me where I could buy the part... They said the only way they can help me is if I relocate the water heater or put in a ventless water heater. Our water heater is vented thru the roof of house... It gets plenty of ventilation. They wouldnt let me talk to a supervisor to complain... So this is why I am on here writing this review. I might add this is not our first issue with Whirlpool. Had a brand new KitchenAid refrigerator with ice maker. The ice maker didnt work from first day. After 3 techs and 3 visits it still doesnt work. Then also the compressor went out. If you want a better product and want good customer service then dont buy Whirlpool.Oh and one more thing. Our plumber also doesnt like Whirlpool. He said he had problems every time when he has to deal with them. He said its to the point when someone calls for services and tells him its a Whirlpool he just cringes. Now thats pretty bad. I just spent 4 almost 5 hours of my morning upset to the point of tears. With no results. Another note. I called my gas company. They said our water heater is in a safe place. If it wasnt they wouldnt be supplying gas to us. Live and learn. Done with Whirlpool.

Whirlpool Duet $1300, in the past we had great service from other Whirlpool products. Just a more modern look and knowing it was a company we had used in the past with very little or no problems so we expected the same only with energy and water savings. We are energy aware and believe in conserving energy and water where we can. My wife wanted to stick with the brand that gave us good service in the past and chose one of their most conservative units on the market (I believe it was based mainly on looks). What burns me the most about this unit is its constant consumption of clothing, the repair guy found nothing askew with the unit and suggested smaller loads. So we reduced the load size smaller and smaller till we were washing each outfit separately and guess what, it still ate clothes, just chews them up.We lose about a hundred dollars a month in clothing. This washer tears holes and shreds clothing on almost every load, I have to put shirts and lighter clothes to the back of the washer then load the heavier blue jeans and such toward the front and hope they finish in the same position or something is ruined. The fabric becomes distressed, stretched, shredded or has holes, or any combination of the above. We have taken to going to a laundromat or sending clothes to the cleaners. These units are three years old and we are now looking for a replacement for the washer because the local service guy won’t even come out any more. This problem surfaced within a week of the first use of the machine and has remained steady, as we are retired and travel a lot we are not always using them so they are what I would term very lightly used.

I bought this Whirlpool Cabrio washer three and 1/2 years ago and the assembly which is basically the transmission and the assembly which is the agitator is out! Needs replaced! This is complete crap! The new parts will costs over $500 bucks plus labor! Ridiculous! My last washer which was a Maytag lasted me 20 years! What a piece of junk! Now I have to. It a new washer! No thanks to you Whirlpool! I will never buy another Whirlpool appliance again! Neither will my family or friends!

In 2008, we also bought a Whirlpool 40 gallon gas hot water heater with flame lock, Model #BFG14040T3NOV. We too purchased from Lowes. The plumber was here yesterday to replace the thermostat for the third time in 4 years. We also suffered through cold showers, warming water for dishes and sponge baths. We are in our 60s and are worn out arguing with these people. If there should be a class action law suit, you can count us in. It is not right to have such a faulty product out there by Whirlpool. This is still America, right?

Refrigerator was purchased in March 2015. Icemaker filled the basket two times then never worked properly again. The water would enter the tray, freeze, but never drop the cubes. In order to drop the cubes, we had to unplug the refrigerator for a moment then we would have those few cubes. We used one service company sent by Whirlpool that came 3 times, adjusted temp, and replaced one electrical part. It didnt work. The repairman was going to call for support from Whirlpool to see if anyone else had had this problem. I didnt hear back from him until I called him 1 1/2 weeks later. He basically said there was nothing else he could do. Whirlpool sent out another service company. He replaced 2 electrical parts. They didnt work. We have no choice but to keep having service men come out and try to repair the refrigerator. What happens when the warranty has expired? They are trying to sell me an extended warranty. Give me a break. It would be nice to have a working refrigerator first. I wish I would have read these reviews before I ever bought a Whirlpool. Im 78 and Im still learning. Never again, Whirlpool. Ill spread the news as well because we all work too hard for our money to throw it away on poor products.

I bought at Lowes. The first one was sent back (doors stuck, suction cracked lining). Now the temps are not working in the fridge or freezer. All the food got dumped. Its sad. My old one lasted closer to 25 yrs. (and may I add up to ten children). This one has only been used by adults. I thought I could trust Whirlpool?! I sent info to local Lowes. We will see if theres any help.

I Purchased 9 year warranty, Whirlpool water heater and installed it. Started having problems in the first month. It started giving a water temp too high error code, yet water was barely warm. Called Whirlpool. They had me do a bunch of diagnostic checks. Determined it was a bad control module. Sent me a new one. I installed it. Within a week or two, same problem. Called Whirlpool. This time they sent a Tech out. Everything on water heater tested normal, nothing wrong with any part. The tech finally, found a TSB that indicated that you couldnt have any re-circulating valves or systems connected to the water heater. We had one to keep hot water at the taps. So I removed the re-circulating kit and water heater worked for a few months. Then same problems, it keeps going into error. Error code indicates water temp too high, but water is barely warm to cold. Call whirlpool several times, they send out another control module and heating elements and I replace them. All work temporarily. Finally replace control module again, and it works for several months. Then back to error codes. Not always the same code. Sometimes it is water temp too high, other times it is check one of the heating elements. We have lived with it like that for about 3 years. We get hot water by resetting the water heater several times a day. Well, about 3 months ago it started tripping the circuit breaker in the electrical panel. I called Whirlpool and explained what has been going on since I bought their piece of junk. They will not do anything unless I call and pay for a service tech to come diagnose and repair the problem. They will provide the parts for the repair. I am not a certified appliance repairman, but I do handy man repair work for a living and do appliance repairs quite regularly. I am capable of doing every test that the repairman will do, but Whirlpool insists that I pay to get their defective product repaired. Then if I have problems again in a couple of months, I will have to pay a service tech again. I have friend that had this same water heater. I replaced the control module on his once. I was telling him about my woes and he told me he got fed up with all the problems and ate the cost and got a new water heater, not a Whirlpool. I am going to call Whirlpool one more time and then I am sure I am going to do what my friend did and put the money I would spend on a service tech into a new water heater. It will not be a Whirlfool.

We have had this Refrigerator for 3 years in December of 2016. To date, we have had to call a repairman (in February 2016) to replace a circuit board on the back of the refrigerator. That took 4 days, as the company sent the repairman the wrong parts. After that $300 repair, which we got at a discount because, the repairman felt bad that the company actually sent the wrong part. Since then we have taken it apart ourselves for several reasons: The freezer compartment filled up with a layer of ice and started to melt all over the floor, shutting the refrigerator off, (which then forced us to borrow coolers to store the food) until it could be repaired. The drain tube was completely blocked and in order to fix this problem, the tube had to be taken out and modified, according to the Internet videos we then watched. In order to make all of these repairs, the door, the shelves and baskets have to be removed, which is definitely not an easy thing to do at all.There are so many hidden screws and tabs that must be manipulated with tools and by hand to remove the doors, shelves and trays just to get where you need to be in order to make these repairs. With each repair, the ice maker and water dispenser started having problems, because, each time the refrigerator has to be shut down, it takes hours for it to re-set itself. Luckily my husband had the tools necessary, with videos on the Internet to assist us. However, once the first problem started, it was a snowball effect, literally. ALL of these problems have been identified by the manufacturer, however, nothing has been done. VERY POOR DESIGN!

I was so excited when I bought this stove. It broke right outside the warranty. It shuts off in the middle of baking or just doesnt stay on at all. Bad, bad, bad. They told me it would cost $400 just for the part, not including installation. What a rip off. I called the tech and he said this is a known problem. He advised me to just toss it and buy Hotpoint which has a much better consumer report rating. Sad.

DOES NOT MEET CONSUMER NEEDS AS PROMISED. I wish I read the reviews. Very expensive machine I purchased specifically for the large drum for large loads. The machine cannot handle large loads (if you consider one blanket large load). I have to unplug the machine mid wash, as the load gets stuck on one side and moves my machine across the floor. The noise in the spin cycle with even small amount of laundry sounds like a helicopter is about to land. Then last night I noticed black oil splattered all over my floor. This is a $800.00 machine. Never ever met my exceptions as the machine promised to deliver. Theres very little water that enters the drum... Not even my towels come out clean. DO NOT BUY WHIRLPOOL... EVER EVER EVER.

Bought a brand new 40 gal water heater from Lowes. Installed it and it worked fine. Next day no hot water... After doing all the tests with tech support. This smart mouthed CSR explained to me how her uncle is a master plumber and she knows what shes talking about. Still couldnt tell me what was causing it to not work. Other than the reset being tripped. I have had good luck with Whirlpool products. But customer service has always been poor.

I purchased this washer brand new just 2 years ago. It started making loud crackling noises approximately 3 mos ago. Yesterday it decided it did not want to spin or drain. Today a repairmen tells me its a wash. The computer screen has gone wacky and the cost to replace that will be well over $400, almost to the penny what I spent 2 years ago. This is not a good product Whirlpool and i trusted you since my previous washer lasted over 15 years. I need a refund and a new washer! Disgusted!

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

This is one of the best washers I have had 4 years now. The spin cycle is great. Feel almost dry when done. My daughter was going to order this set but cant get them anymore. I guess it is because it is too good of a washer.

Exterior metal reaches temperatures that cause minor burns on an adult finger and could be potentially more dangerous for a child. The self-clean feature has crashed the oven on two out of three uses of this function and overheats handle.

We purchased commercial washing machines for our building, we discovered that the clothes were coming out of the machines with dry spots and partials of soap. When we asked the dealer about this they sent a tech. to check the machines. It seems that these machines do not allow a adequate amount of water into the tub to wash the clothes. Only 6 or 7 inches of water is not enough water to wash a full load. When asked how this can be fixed I was told it cant be fixed. I was told this is a energy saving machine, which means you can only wash very small loads!What is the point of running a machine for twice the amount of time to do what you used to do in one load? Had we known this before purchasing what we felt was a quality machine, we are now stuck with machine not capable of doing what is required of them. When asked if they would take the machine back, no is all they say. I would never buy any product made by Whirlpool or Maytag because of the way this problem of ours has been handled. We purchased these machines from Prestige appliance, they have been good, but with no support from Whirlpool.

I purchased a side by side Whirlpool refrigerator in December 2009. In one year’s time, all of the plastic shelving has completely broken. The repair man said that he felt like the plastic was substandard and to call Whirlpool but they said that we must have abused the shelving.I and my husband are senior citizens and the only ones using this refrigerator. How can all the plastic components break within one year? I had my last refrigerator for over 10 years and I gave it to my son. It is still running and all the plastic shelving is still intact.I feel Whirlpool should fix this problem but they do not care about their customers. Once they have your money, you are forgotten. In the end, they will be forgotten because I advise everyone I know not to buy from Whirlpool.

Since May 3, 2016, five servicemen have failed to repair my Whirlpool refrigerator (WRF560SEYM), which is less than 2 yrs old. One trainee from A&E Factory Service had the nerve to reinstall broken parts. I have been completely without refrigeration for the past 48 hrs only to learn that the repairman scheduled for tomorrow has been cancelled because AIG warranty has not approved his visit. Further investigation reveals that the parts were never ordered, pending approval from AIG. Whirlpool cant help me because AIG has not declared the appliance unfixable. Hhgregg cannot help. I have spent countless hours on the phone on hold & wasted hundreds of dollars on spoiled food. Dont trust Whirlpool. Theyre not the company they once were. Their warranties arent worth the paper theyre printed on. Buyer beware!

Whirlpool Cabrio Washer model WTW6400SW2, serial CU2372784 type 480: I have had this set for about 4 years now. First, I had to replace the motherboard. And now today, I found out that the center post seal was leaking and caused a lot of damage. I was told that it would cost around $300 plus to get it fixed. I have seen on sites that this washer is a lot of trouble and the makers need to fix these problems. Also, the washer sounds like a jet running. We need the makers of Cabrio to step up and fix these problems or refund us the money that we have paid out for this thing. We, the people who have bought these machines, need a lawyer and to start filing lawsuits against these people.

My wife and I were gifted a brand new washer (model: WTW7300DW0) and dryer set. We were very excited to try them out as we had just moved into our new home and had been without a W/D for about a week. We ran our first couple of loads and discovered that our clothing was, especially dark colors, covered in white stains. We didnt know what it was so, we did a little research and found out it was most likely soap residue. So, we reduced the amount of soap we were using... and it still happened. We tried every setting available on the touch screen... clothes still came out covered in soap. We eventually called Whirlpool and had a technician come check it out. He ran his tests, said everything was fine, and to use only a teaspoon of soap for every full load of laundry. This didnt sound right to me but we tried it out... stains... still... and I noticed our whites were not getting cleaned very well at all. Sweat stains from undergarments were hardly touched during the wash cycle. After several more phone calls to Whirlpool, were having another technician come out. I just want Whirlpool to take this POS off of our hands and exchange it for something that works. A washing machine that actually washes would be nice.

The trim on the front the my Whirlpool electric range has rubbed off. This is where the knobs for the burners are located. It was replaced once during the Whirlpool 1 year warranty (so it obviously happened with the first year!) and again during the second year we have had it. We have an extended warranty but have been told that it is not covered. It is ecstatically unacceptable. We have not used any type of harsh cleansers on it - simply a sponge to remove any spills yet it keeps on disappearing. I strongly recommend against buying any range from Whirlpool as it is quite obvious that they do not stand behind their products beyond the first year.

I bought the Whirlpool Cabrio washer 2 years ago. It started recently messing up and making a loud noise during spin cycle and gave me a UL code. I called the repairman and he is stating several things need replacing. Cost more than washer did at time of purchase. Bearings and 2 other items need replacing parts. 550.00 plus labor of 250. I will never buy another Whirpool. My previous washer lasted 10 years. I got rid of it for a matching washer and dryer by Whirpool. Worst mistake and Im out a lot of money. By reading all the poor reviews. Seems like Whirlpool would do something. Its a ongoing problem. Many people have reported. I have read many similar experiences and wished I knew before purchasing this set. If you are reading this do not buy this washer and dryer set.

I just purchased a brand new refrigerator from Whirpool and after 2 weeks been delivered I started having a lot of issues. They sent a technician twice to get it FIX but Im still having the same problem. And they dont want to replace the unit. They want to keep sending technicians to make the same repairs. Its a NIGHTMARE!! Please do yourself a big favor and buy a different brand. I dont recommend!! By the way this appliances are made in MEXICO!!

I bought my Whirlpool Convection oven in mid August 2019 from Lowes. I have had to call no less than 5 times about my NEW oven which I am extremely remorseful of buying. I am so unhappy with my experience mostly due to my expectation that my new oven would have been able to meet my demanding needs baking and cooking. I would have thought that it would have lasted longer than 4-5 months. The bottom left hinge is faulty which I am told is an undocumented problem for this particular oven. I noticed that it was having a problem when the oven wasn’t quite making a seal. Slowly it got worse until now it makes an initial click then I can open it about 5 to 6 inches and then have to lift it up so that I can open it without making a horrible noise and a dent in the frame.The first time I called was on Saturday Jan 4th. It took me 1 hour to get through to speak to a person. I asked why I couldn’t get a new door to the oven and they told me the hinges have to be installed separately because this model is made to be able to take the door off for cleaning purposes. They set me up for service on Wed Jan 8th between 12 and 4p. I wasn’t as unhappy at this point. I even got a text saying that the appliance company would be coming between 12 and 2. At 12 when I woke up after working nights, I got a message saying that they hadn’t received the part yet and that there would be no point in them coming. I called Whirlpool again and they told me that the part was on backorder and that in fact the part had to be fabricated and it may take up to 10 business days but that they would have the part sent directly to my house. By this stage I am very unhappy.I called back this morning and told the person that I would rather have a new oven or my money back and that my less expensive and less decorative oven that came with my house lasted me 20 yrs. I get a lot of “I’m sorry” and “I apologize” but that doesn’t fix my problem. I also told them that now the frame of the oven is being dented so I am going to have a less than perfect appliance which is no fault of my own. The only info the person could give me is the tracking number of the part they were able to locate which would be coming Fedex.I tracked it and it was due to come no later than Tuesday night. So I called the original service company in my area who told me to call to set up the service time when the part came in. I figured I would get a jump on it and call. They told me that they were all booked up this week and I would have to wait until next week. Do you think that this is how your customers should be treated? I feel as though I am being punished by choosing to buy an appliance from Whirlpool. I then tried calling back to set up an appt with a new company but the wait time was too long. I had just worked nights and needed to get some sleep. I called back this afternoon and again had to explain the whole situation AGAIN. I was able to set up an appt with a different company for Monday between 12 and 4 which happens to be on Martin Luther King day…so I am hoping it is not a mistake.Do you think this is fair treatment for a customer who just bought a brand new oven less than 5 months ago? Would you like this type of service? Would this give you any confidence to buy products from Whirlpool? I don’t believe that I would be able to recommend Whirlpool in good faith. The people who I have talked to have never been rude or disrespectful however, I feel as though my unhappiness is just par for the course. I feel as though it is just my tough luck and “oh well so sorry” instead of the attitude that you want to make everything right as quickly as possible. I ask myself if the problem was the store I chose to buy from? If I should have gone to Sears and bought one of their products or where I went wrong.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

Whirlpool washer is junk. Expired I. Less than 4 years. Cost to repair is more than new washer. DO NOT PURCHASE WHIRLPOOL PRODUCTS. Agitator motor burned up without notice. No troubleshooter problem. 2 repairmen suggested I buy new washer.

Microwave has melted a hole on the inside rectangular plastic cover. Model number is on recall list but not serial number. Opened microwave to find melted plastic on my popcorn bag that was dripping from the plastic up top. I will replace microwave but not with a Whirlpool again.

After 1 year and 5 months, my old side by side Whirlpool refrigerator stopped working. The melted ice caused floor damage and ceiling damage of the floor under.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

The refrigerator has excellent quality, low noise level, clean lines and enough room for produce and frozen foods. Would recommend this to friends. This replaces a Whirlpool refrigerator that was over 30 years old. The original unit still works extremely well and we gave it to a family that needed a refrigerator and they were very happy to receive it. It looked as new as the day I purchased it 30 years ago.

Bought a Whirlpool refrigerator and now it is dead after only 3 years - the gas is gone. The Dealer at Budget Appliance Surrey told us it was not a good fridge to begin with (but sold it to us for $900.00) and that Whirlpool had made a lot of fridges cheaply to begin with... So it was not their (Budgets) fault. When I contacted Whirlpool they were really too big to listen to my complaint and even though I had the receipt, they did not care to hear my complaint either. Never buy a Whirlpool fridge.

I just purchased this washer Whirlpool Cabrio. Im experiencing the worst with it because it seems to take forever for it to wash. I came to look at reviews to see if other people were having problems like me. My issue is when I put it on quick wash it seems to say 41min then to 56min then goes down again and up again. I feel like its using more water as many times I hear it filling and washing. I didnt see anyone complain on that part but for the price its a big headache and upsetting because I spent that much thinking you get what you pay but I rather have the old washer I had than this. If anyone has had this issue please let me know and was it an ongoing thing. Not sure if you can comment back to reviews but shame on them to see all these unhappy people and not trying to make things better for them. I wish I read reviews before getting it. Yes it looks good on the outside but is crap.

Bought the washer on November 2013. Today 1 August 2016 the driving motor broke. The cost of the motor is 650.00$. I will not buy another Whirlpool product ever.

Our gas stove (Whirlpool WFG714hLAS1) has been working fine and it looks great. However I just tried the self clean cycle to clean it up. I dont do a lot of cooking with only the two of us, but I like to keep things clean. I was very surprised after the first time - it didnt look much different than before I ran it! I was used to simply wiping down the oven following a cleaning, just removing the leftover ash. I havent had to scrub an oven for many years and it is very hard for me. I ran a second cleaning cycle and it didnt look any cleaner. We both had to kneel down and try a variety of non abrasive cleaners which finally got most of the grease spots, but not all. I guess we will just have to cover the roasts and try to keep aluminium foil on the bottom rack as much as possible. PLEASE re-consider buying any brand stove that has this awful feature, unless you like cleaning ovens by hand!

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

I bought my refrigerator side by side on April 16th 2010 at Lowes. Not even six months, the liner inside started to get cracked. I called and they send serviceman. He just put a tape to cover the cracks. I called Whirpool corp and they told me its cosmetics issue so our warranty does not cover cosmetic problem for as long it works and cools. I will never purchase Whirpool brands. Lesson learned.

I bought a new Cabrio washer in August of 2011, and by December of 2011, it sounds like a jet engine when washing or spinning. It is still under warranty, but it is the same issue reported by countless others as I have discovered. Whirlpool should recall and find out what the problem is so that every consumer does not have to experience this issue.I will never buy Whirlpool again and I am going to make sure I spread the word about this machine to keep others from this experience.

First, the storage drawer doesnt close properly aligned. When viewed from the side it looks off kilter. This is because the foot of the range interferes with it closing. Second, what is with the bright blue color of the time/temp on the computer screen? Everything else in the kitchen is green, but now I have bright blue(?).

In the last year, I have had to put in two sets of parts to my Whirlpool water heater (thermocouple) within three months in between each malfunction. Now the hot water is out again, and I need to have a plumber come and reapply new parts to the hot water heater. Whirlpool is refusing to send new parts to the less than a year old hot water heater until they speak with my plumber. It was purchased in December 2011. I am a disabled senior citizen, and we have not had hot water in over a week. Meanwhile, the weather is in the teens and has been snowing. I live alone and have not been able to wash dishes, take showers or mop my floor. Being a diabetic, cleanliness is very important to maintain good health. Living on Social Security, I cannot afford to replace my water heater parts every few months and my health cannot afford to not have hot water. Model number for this Whirlpool water heater is N30T61-303; the product number is 0733315.

Whirlpool Cabrio Platinum Washer - Worst purchase ever! Washer will NOT clean clothes. It leaves detergent residue on everything and I use liquid detergent. All of my husband’s dark police uniforms have grey powdery looking streaks on them after they come out of the machine. Does not matter how I load the clothes. The horrible results are the same. Even rewash and extra rinse, streaks are still there. This model, Cabrio Platinum was very expensive! Never buy a Whirlpool.

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

I have had the Whirlpool washer for almost a year. It has multiple settings for different types of laundry, i.e. towels, bedding/bulky, colors. It is intuitive. My husband is able to put laundry in and is able to figure out which cycle to use. The tub is roomy and holds large items well. The dryer I just purchased in the last month or so. It matches my washer and so far I love it. It has very similar settings that match the washer. The lint filter is very effective, cleaning after each load is highly recommended. It dries quickly and is quiet.

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

I am an apartment manager. We purchased a Whirlpool Refrigerator (Refrigerator FFHT1817LW8) for one of our apartments. When it arrived it was missing a shelf next to the butter dish, also two of the bars that were to go in front of the shelves were the wrong size. This was at the beginning of April, it is now the second week of July and I am still dealing with this issue. The 1st company that was sent out to take care of the problem, A&E appliance, dropped my call so many times I ended up refusing to deal with them anymore. They also sent techs out 2 different times, and both times the wrong parts were ordered. Finally a different company was sent out and they told me that there was nothing that they could do, the shelf did not exist, even though the paperwork that came with the fridge showed a shelf next to the butter dish. Finally Whirlpool offered to order a whole new door but this would take 6 to 8 weeks...I had already been dealing with this issue for over a month. Home Depot stepped up and replaced the fridge; however, when the new fridge arrived it had the exact same issue, no shelf next to the butter dish. That fridge was returned and we ended up getting a completely different model. I canceled the door order with Whirlpool twice! It was supposed to be sent to Home Depot; however, Whirlpool still shipped it to our complex, and to a completely different apartment! It has now been going on 2 weeks almost 3 and the door has not been picked up yet! Despite my repeated calls into the company... I have asked to speak with a supervisor and was told that I couldnt. I have asked to be transferred to and escalated department or complaint department, I was told that I couldnt. There was a phone number I could call to give a compliment to.... LOL!! I would compliment them on their ability to provide the worst service I have ever experienced in my life! I was told a supervisor would be contacting me within 48 business hours, they havent. I have been told that they sent an email in a RED folder to their escalation department and that is all that they can do.... still havent heard anything.... seriously? I have now advised my company to no longer purchase any Whirlpool products... and its funny because we are going to be remodeling all of our units soon and that includes appliances... I have also shared my horror story on Facebook. Maybe as they are going bankrupt they will start to care??? Somehow I doubt it!

We have had the Whirlpool Cabrio washer and dryer for 4 years now. Let me start off by saying the first 6 months was wonderful. Then after that, the machines were breaking down every time we turned around at the worst times. With 2 adults and 4 children, you see my point. We have had a repairman at our house to fix these machines 6 times and now, we are getting a code on our washer that is F1. Looking up codes online shows to be the computer system of the machine and a $400-$600 repair, might I add. Please save your money and buy a better and more dependable set than Whirlpool. Washers and dryers used to last 20-25 years, or so my parents and grandparents did. All of the manufacturers are building cheap junk so we can buy them more often.

I purchased a Cabrio top-loading high efficiency low water washer thinking I was doing something for the environment by saving on water and electricity. After about a month, I noticed that my clothes especially those with stretchable fabric were getting larger. My husband kept telling me I was imagining it. Then the clothes would get all tangled especially the pants with ties on the waistband. At the end of the cycle, the clothes are stuck on the sides of the washer and I have to pull them apart. Even after drying, I have to iron everything even my pillowcases which look like they have shrunk they are so wrinkled. I recently bought some 100% cotton outfits and they are even more wrinkled and are starting to lose their shape. I am now noticing that the stains on the clothing are not coming out even when I use a spot remover and put them through a second time.Now I started to notice an odor coming from the machine and my towels and wash clothes have a sour smell. I paid $600 for this machine and after reading the reviews, I just want to replace it. I am now waiting for it to break down. My husband kept insisting I must be doing something wrong. When it goes into the spin cycle, it bounces all around and I have to push it back in place when it is done. I do not think the clothes are getting rinsed enough so now I put them through a second rinse and always put it on low spin. It doesnt see to matter, it sounds like a rocket ready to take off. Is it even worth it to go back to Lowes where I buy all my appliances?

To be fair to Whirlpool, I have contacted them but have not given them time to respond. I feel so strongly about this issue that I want to get the message about this company product out. About 2 years ago, we purchased a Whirlpool fridge, stove, and dishwasher. I have had so many problems with the stove (WFG540H0AS0) that it has pissed me off, actually. First, the knobs that control the stove top melted. MELTED! We had to replace them to the tune of $30.00 each and there are 5. Why would anyone use knobs that cannot withstand heat on a stove?! News flash, I cook on my stove. Therefore, there will be heat used. Second, the oven keeps shutting off in the middle of cooking my holiday meal. Of course, this made my turkey take much longer than usual. Today, it shut off in the middle of cupcakes. Third, the oven does ignite without turning it on and off multiple times. So we called the repair person who told us to replace the ignition switch for it. This helped for about one month. Then the problem started again. I just emailed Whirlpool and I will call them next business day. I am so disappointed with Whirlpool. I thought they had a good reputation for quality products.

Have always loved Whirlpool. Like the silverware in the door. Doesnt take up space for other dishes. Cleans well and quiet. Trusted brand and would highly recommend Whirlpool. All of my appliances are Whirlpool, stove, refrigerator, washer and dryer. You might call me a diehard fan.

It has been a rude awakening, that Whirlpool is a substandard company. I have gone through 3 refrigerators under the label Kenmore, Whirlpool & 2 1/2 days ago Maytag. I purchased a Maytag 9 years ago and it is still working fine, and even cools a bit too much. Now mentioned labels are under Whirlpool; Since Whirlpool bought out Maytag in 2006, Whirlpool turned Maytag into a sub standard product company. They are spuming refrigerators with defective thermostats. Just think of it, I am one customer that have had the same issue with 3 REFRIGERATORS UNDER 3 LABELS MANUFACTURED THE WHIRLPOOL. I just called Maytag, and when I tried to make sense of the name of either Daren, Karen or Taren, ** hung up on me. I then called Home Depot online major appliances & ended transferring me to WHIRLPOOL!My Maytag refrigerator was delivered 07/25/17, after less than 24 hours, I had to move the settings to 4 from 3 for the refrigerator. She said that if the refrigerator cools enough at 4 then there is nothing wrong! Nothing wrong! To be substandard, in my book its plenty wrong. They have no business sense nor customer service sense. I will buy another refrigerator or appliance from any Whirlpool labels when hell freezes over! For them to accept substandard parts, probably foreign, it is not acceptable in CA nor the USA. Since; since this is a foreign owned company, I pray they will be a company not doing much business in the USA unless the measure up to our standards. Since; going forward we will make American and Buy American!