Whirlpool customer service is non-existent. I have a Whirlpool microwave that burned up after two months of use, and they sent over a technician twice, in the past three weeks and it is still not working. Now, I am being told that it will take another two weeks before the correct part is found, and the technician is sent here again to fix the problem.I have no microwave now, for what is going to be about 5 weeks, and that is only if they get it right this time. Whirlpool wouldnt approve for me to have it traded a trade for a new one at HH Gregg where I purchased it in Aug of 2011. HH Gregg only has a 30-day return policy, and it went bad after 60 days.

On October 25, 2014, I lost my home, all of my belongings, and nearly lost my wife when my Whirlpool range model xfe371lvbo shorted out and caught fire. After spending thousands of dollars for an independent investigation to be conducted on the stove, it was determined that the control panel on the console shorted out, causing the fire. Since then, I havent had any response back from Whirlpool. I am in the process of meeting the required criteria for filing a claim, but have some questions, and everyone seems to be ignoring me. Please help.

Weve had this microwave (WMH31017AW-2) for 2 1/2 yrs and the door is falling apart. It started with one crack and now the middle glass of the door is falling out! I took the door off so the the glass wouldnt fall on the stove and the plastic around the door literally crumbled apart. So disappointed since that was the same reason we took the other one back that was in this house when we bought it. The microwave is now discontinued and when I did find a door online it costs as much as the microwave! Whirlpool doesnt distribute the dependable products that were, back in the day, associated with the name WHIRLPOOL. Shame on the greedy people who have taken over and cut back on quality material and labor to put an extra penny in their pocket!

The unit had all the features that we wanted and considered essential. The unit only weak issues is temperature(s) in both sections. The freezer is very poor with ice build up on the food stored for more than a couple of days. The manufacturer has been very weak in support as to how to solve this problem.

The double oven is the best! Doesn’t heat up the house like the older stoves! Very easy to clean. The range is all one level, so it is at easy to set your pit anywhere. Also the middle burner is amazing for a griddle!!

We have already filed a complaint but could not get any satisfactory reply. Our washing machine is not working properly & we are very angry with your service. It has created a lot of problem to us. Kindly do something regarding this.

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

Purchased this Whirlpool refrigerator WRT771REYM at Home Depot in June 2014. Within a few months of purchase, had to call for a repair tech because the water line had frozen. Tech unfroze it and told us not to block the air vents to avoid this happening again. The amount of care we have to take to load this fridge so as not to have the water line freeze is ridiculous. Its very picky. For a while, we were still having to unfreeze the line every couple of months. Then it became more and more frequent, to the point where we cant keep it unfrozen for more than a few hours. This seems like shoddy design to me. And of course, the warranty is expired so I am out of luck unless I want to pay for repairs out of pocket.Adding insult to injury, Whirlpool claims that this isnt a common issue. Not true - there are numerous reviews about this very issue on Amazon, Sears, Home Depot, etc. Just try googling the model #. Sad that Whirlpool does not stand behind its products. Yet another American company to stop building quality and rely on planned obsolescence to ensure revenue generation.

My Whirlpool Cabrio has been a real workhorse of a machine. It has been able to take large loads and small loads and get them equally clean and fresh. This was a more expensive model but it was worth the purchase price as I have used the various features provided. I also have appreciated that if you leave clothes on the washer overnight they are still fresh in the morning.

Whirlpool has been an absolute nightmare from day 1. We bought a brand new 50-gallon water heater from Lowes. It did not work. We went back to Lowes and were told to contact whirlpool. We contacted Whirlpool and were told to conduct a number of test and all test passed, so they said we needed a plumber to come look at it. Remind you that this water heater is brand new and has not worked since day 1. They said the plumber would cost $130 and they would pay for parts. Why am I having to pay when my water heater has never worked. Paid the money. Had them come. They replaced a part, did not work, replaced another and it did not work, so the plumber requested a new water heater. Whirlpool refused. What is the point of paying and they are not going to fix it.Whirlpool insisted it was our ventilation even though all test proved that was not the problem. So out of pocket again to fix the ventilation and it did not work. After 2 months of no hot water with a two-year old at home we had someone we know come look at it and fixed the main pipe. Whirlpool took my money and didnt fix my problem. HORRIBLE SERVICE.

Purchased my Whirlpool dishwasher in 2005 model number GU2500XTPQ3. So it worked for about 10 years and I am fairly happy with that but I have a warning, my control panel shorted out putting out thick black smoke and I was unable to turn off the dishwasher. I had to turn off the switch at the breaker box. If my wife had of been the only one home she would not have known how to turn it off and would have had to call the fire department. I dont know if the short would have led to an actual fire but with that much heat I have to believe it would have. Warning, dont run the dishwasher when no one is home. Hope this helps someone.

Whirlpool WRF990SLAM00 french door refrigerator - We purchased this refrigerator in February of 2013. On Christmas Day of 2014, (not even two years later) the freezer and icemaker started malfunctioning. We spent $2000 on this fridge. Luckily we purchased the extended warranty from Lowes. However, Im so disappointed that a fridge that isnt even two years old already has an issue, plus we had to get rid of over $85 worth of spoiled food from the freezer. Credibility fail for a supposed quality product.

I have no problem with Conns. My complaint is with Whirlpool for making such a terrible machine with the Cabrio Washer. Its a piece of junk.Fortunately, I bought the extended warranty – which was used many times to replace computer modules and pumps. Now that the warranty is out, once again the machine is doing the same thing. Bad codes, not filling, etc... Some cycles you cant use it at all. The cleaning cycle is never ended (literally). I am debating on having it fixed or just getting another machine.

Whirlpool duet - I have had this machine for 4 years and have gone through as many door gaskets. They rip in no time causing damage to clothing and with the leaking damaging my wood floors. A definite do not buy!!!

Seems to use very little water. When I take the clothes out, they are bone dry in places which means they havent even seen any water! Clean (?) clothes end up smelling musty and I end up having to wash them two or three times which completely goes against any eco argument! I am really disappointed with this product and would never buy Whirlpool again. I have just washed our dog blankets. The cycle finished so took them out, had to check that the detergent had been used as the blankets were almost completely dry. The blankets still completely smell of dog so have had to put them through another wash (with more detergent – waste of money) and with a pre-wash cycle. Rubbish! We also have a Whirlpool drier and that is no better. Washing never comes out completely dry. It always has to be fully aired, sometimes more than others. There is no consistency in how wet or dry the clothes come out. Avoid at all costs.

Whirlpool’s customer service is one of the worst I have encountered. They consider a 6-7 year old $1500.00 range to be old! I said to her, “Wow, if the population was to throw their Whirlpool appliances into the landfills after 7 years, this would be quite a horrendous situation.” I think its disgusting for a company to build appliances with a shelf life of 6-7 years and with only a 1-year warranty! What a horrible brand! I will never buy another Whirlpool brand product ever again. You spend $1500.00 on a range oven and then around 5 to 7 years the control board blows out and costs another $500.00 to replace plus a service agents fee to remove and install.I asked the Whirlpool agent if I could get the control board discounted and she refused and said, “I am sorry, we are unable to help you.” Pathetic! Their cost on these boards is around $120.00 or so. I was told by an appliance service rep they could discount that $500.00 board even half and still make a decent profit. Do not ever buy Whirlpool. Go with other brands instead. Their customer service policies are horrible. Your hard-earned money will be buying an appliance with a 6 to 7-year shelf life before major repairs.

I recently purchased a Whirlpool over the range microwave. I especially appreciate the unit's strong exhaust fan. My previous microwave's exhaust fan was much less powerful. The unit's black glass and chrome trim look great! I am extremely pleased with the new microwave.

We got a brand new bottom freezer french door Whirlpool refrigerator in our brand new apartment. Since we moved in last week the temperature control in the refrigerator box has failed three times. The freezer stays cold but the coils are frosted solid and no cooling gets up to the refrigerator box. We turned on moisture control but that didnt help. The users manual is completely useless and in fact doesnt even match the control panel. The numbers for temperature settings on the instructions dont match the numbers on the panel.We had to turn off and thaw out the unit completely three times already and this is just the first week! Last night the building maintenance guys came in and sprayed the back panel of the freezer with warm water. He said he talked to the GE tech, who suggested we also increase the freezer temperature settings to 4 and the refrigerator to 44. But this morning the temperature rose again. It sure sounds to me like the daily defrost cycle isnt running at all and nobody wants to consider that possibility. Thaw the unit several times a week is completely ridiculous. Our food has experienced so many temperature excursions who knows whether its any good now. I cant wait to get my first taste of salmonella. This is what you get when you combine junk with poor service.

This French Door refrigerator looked beautiful. There are only two of us in the home. We purchased it at the end of 2014 and it just keeps getting worse. The front of each shelving has cracked. They look like they are dried out plastic the way it cracks. The drawer tracks have seem to keep crumbling pieces off. This is not a cheap refrigerator by no means, this is the first time buying Whirlpool, and I believe the last time.

I have the same problems that all the consumers are complaining about. I have a Whirlpool refrigerator with the freezer on the bottom. I have it for 2 years to date, and it doesnt keep my food cold. I loved the roomy space it had; thats what sold me the refrigerator. If I would know what I know now, I wouldnt have bought it. I will never blame the business that I bought it from; I will blame Whirlpool. Hearing all what the consumers did to try to fix the problem, it sounds like a waste of time and money. Im sorry to hear what you went through, but also I want to thank you for your complaints so I dont have to deal with it. Whirlpool sounds like a piece of junk. I’m going back to a GE.

Thrilled with my first experience (9 years now) with my Whirlpool glass-top range/oven. Truly LOVE the modern look of glass cooking surface which cleans up like a dream! NO harsh abrasives needed, always WIPES shiny and beautiful. All-electric...no stinky gas fumes. Wonderful features... Computer controls, SELF-CLEANING OVEN. Now, if only it would do the prep-work.

Purchased the French door bottom freezer 29 cubic ft. refrigerator on Dec. 22, 2012. Ice maker broke Dec. 2, 2013 and it has been downhill since. Replaced it and it broke again on Jan 2, 2014. Been waiting ever since for replacement parts. In the meantime, the freezer went out. Compressor went out. Freezer is as cold as refrigerator at 40 degrees. Lost food out freezer and food molds in refrigerator after a few days. Repairman came to investigate and determined the refrigerator is a lemon and needs to be replaced. Thankfully for the 5-yr extended warranty, it will be replaced, but it has certainly been a headache. Everything shiny isnt gold...

We purchased a Whirlpool Cabrio washer & dryer in 2005. After CONTINUED issues with the washer during & after extended warranty, we decided to replace it in 2011. Im not a fan of mismatched sets, so we also replaced the the dryer. After researching the WP Cabrio, we assumed that model was a fluke and reluctantly replaced with the Whirlpool Duet Set. Nearing our warranty expiration, our new washer has stalled for the 3rd time. Sears customer service has been absolutely dreadful since day 1. Original delivery was scheduled incorrectly, so we ended up picking it up. We then spent the next 3 months trying to get our military discount credited back. They promised at time of purchase it would be credited automatically. After 2 hours wasted on the phone today, we are still without a working washer.. or even a date as to when it will be repaired. I was appalled at the condescending phone conversation I had with Sears rep. When service showed up last week, he knew immediately that 1 part was missing. He replaced the other 2 parts, and assured me hed rush the 3rd part and come back out today. Had I not called, we would be receiving a phone call on Friday to say our part was backordered and not available until June. After a long and frustrating conversation, I was told we could have a courtesy $25 max a week for laundry, with a max of $100 per year. I was also told that it wasnt Sears fault the part wasnt ordered when I called the 1st time, and so the 21 day wait period didnt start until the service man caught the mistake. If we hit 21 days from that date, they supposedly will do some sort of swap. I have confirmed with WP that the part is on back order, and frankly they didnt do anything either.. but the rep was much more apologetic. They couldnt do much because our warranty is through Sears and not them directly. My great niece is coming in 2 weeks for the 1st time since she was put on hospice, and I will be without a washer to clean her cloth diapers. She is on a very specific diet and has a feeding tube, so I will have to waste time hand washing clothes instead of savoring her visit. I will never shop at SEARS again. They have continued to go downhill with all the corporate changes. I left the corporate world a couple of years ago, and I can tell you that Sears doesnt take no or sorry from their vendors. Im very upset and intend to take this to another level, which I rarely do.

Our side by side refrigerator is 2 1/2 years old. The LED lights are not working. Had to call repair service because one cant get into the housing without a service tech No9 normal screw in light bulb to replace 2 burned out light bulbs AND pay for the service call is $475.00. THIS IS HIGHWAY ROBBERY. I would expect to pay for a major repair BUT A LIGHT BULB. DO NOT BUY A WHIRLPOOL REFRIGERATOR WITH LED lights. This is a major flaw in their manufacturing and If they go out again the fridge will go to the landfill.

I love my Whirlpool 4.7 cu. ft. top load washer because it has a pretreat station that is super handy for pretreating stains in a handy little place. The agitator is stronger than my old washer and really gets my clothes cleaner. Its also very quiet and easy to use all the buttons. The best feature is the deep water fill that you can select for more water.

I have a nice basic fridge, 2 side by side doors on top and a freezer on the bottom. Also has ice and water on the door. It does exactly what it should do, keep my food cold! Works great, lots of room and has adjustable shelves. No weird electronics to break. Had it for 3 years and I love it. Also, its American made which is important to me.

I purchased this Maytag clothes washer in 2007. So far Ive had to purchase and replace the front door 2 times. The current one now needs replacing. The plastic near the hinges disintegrates after about 2 years. This appears to be a manufacturing design defect. I have requested from Whirlpool to send me a replacement door for my washer. The part number is 34001178. The model number is MAH2400AWW. The Serial number is 14060452LE.I have spoke to four different levels of employees at Whirlpool after escalating the service request. Each time they have told me they are unable to send a replacement door to me, stating that the product is out of warranty. I realize that the washer is out of warranty but I believe this problem is a design flaw. The plastic near the top door hinge breaks down and cracks after 2 years of normal use. The last person I spoke with Michael (would not provide me with a last name) said to write to the Whirlpool corporate office with my complaint.

Purchased this oven on 9/12 from Sears, did not purchase an extended warranty and didnt think it was necessary. Im a 64 year old widow and only use the oven on holidays, to date Ive used the over 5 times. With Easter coming, I decided to clean the oven. Followed the instructions, the door locked and the oven died. Im totally disappointed, now it would cost over 100.00 to repair, money I cannot afford. Called Sears and all I was told over and over again that they can send a repaid person and I would have to pay. I was also told that I should have purchased a Kenmore and I wouldnt have had a problem and finally I was told that they couldnt fix it and referred me to whirlpool customer service, who also told me it would cost over 100.00. A 19 month oven should not have died. It should have cleaned the oven and continue to work for many more years. Again, Im upset, angry and disappointed with sears & whirlpool. And dont know what to do. Does anyone else have this problem with the oven, is there a recall?

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

Yesterday, my DC premier refrigerator purchased on 22.12.2011 suddenly stopped working for a long time, and the inside light automatically went off. All food, vegetables, and others are damaged and rotten. Now we are scared to keep anything inside this for huge loss and health problem. Kindly rectify this, and do the needful at the earliest.

We just remodeled our kitchen and bought a Whirlpool kitchen suite in May of 2016. The refrigerator is absolutely terrible. I have had a repairman come out and fix the same repair/problem 5 times, a sheet of ice forms beneath the vegetable drawer (We have only owned the refrigerator for 5 months). Each time the repair person has come out it costs me a day of work due to having to wait all day for the repair service that Whirlpool hires out, well be there between 9am and 4pm. This morning I decided to check to see if the sheet of ice is forming again, it is. So I call Whirlpool again.Again, I call Whirlpool and ask if I can just get a new unit; 5 repairs in 5 months on a brand new refrigerator. The reply I get from Whirlpool is always well send someone out to fix it. The unit has to be deemed irreparable or a part has to be replaced multiple times. No parts are being replaced... no one knows how to fix it. I dont understand why a large company like Whirlpool would want people to write bad reviews for their products and customer service. Im extremely irritated with how I have been treated. I just want a refrigerator that works!! DO NOT BUY A WHIRLPOOL REFRIGERATOR!!

Aqualift self clean oven??? I followed the directions on how to clean my oven. I wiped and scraped out spilled residue from the oven. Then started the cleaning process. The sides of the oven were not cleaned even when I wiped them with a damp cloth. Scrubbing and scraping with the tools that came with the oven helped somewhat. The bottom of the oven was not cleaned. I had to continually scrub and scrape to get it looking half clean and even then, there were still spots that would not clean away. I would have preferred an oven that uses oven cleaner, it gets the oven much cleaner and with less scrubbing on my part. All in all I am very dissatisfied with the oven and would never recommend it.

Bought the refrigerator in december 2017. Called them 2 times already and just called them again on sunday. They are coming out friday the 15th again to fixed a leaking problem. The first time was the freezer was freezing up a lot of ice which they claimed it was the rubber on the bottom door of the freezer was not sealing tight enough. Second time the refrigerator was leaking so much water I was literally drying up water everyday and have towels on the floor to prevent my new floor from damage. Leaking starts again same problem. Completely frustrated now. Going to contact Consumers Affairs to see what further action I can take.

I purchased this range in 2010 and needed to replace the control panel/switch membrane in 2011 and it was covered by the warranty. Then I purchased an extended warranty and needed to replace the same part again. Then I replaced it again in July 2016. This part cost $147 and you cannot operate the oven without it. There is something wrong with the range that is causing the failure and the cause of the failure should have been fixed when it was under warranty but now that it isnt under warranty, Whirlpool has refused to correct the problem or compensate me for the cost to replace the part.

We bought a Whirlpool Refrigerator - Model ES5FHAXS in 2006. Right off the bat, a line in the back of the refrigerator was leaking. We paid for the repair. Next after just one year, the refrigerator would be warm and the freezer part ran super cold. The settings did not work. After much haggling with Whirlpool, they paid for someone to come out and repair it. It worked for several weeks then the same problem came back again. We argued with Whirlpool again and someone from AES or AAA came out. The problem was fixed but once again came back again after a couple months. We called Whirlpool again. This time was much haggling and arguing but got them to come out a third time. Once again, the problem was fixed but came back again after several months. The repair company stated that if they found it was something other than what they fixed, we would be charged. I said either it was not fixed right or the refrigerator is a total lemon. I said you will probably just say it is something else to cover your costs. Whirlpool acted like they did enough, even though 3 repairs could not get it right. If we paid or each repair ourselves, it would have been nearly the cost of the refrigerator and it still would not have worked. We bought a refrigerator back in 1992 and never had any problems after 16 years when we moved. The refrigerator was not cheap but could not do what refrigerators are supposed to do - keep things cold all the time. What a disappointment.

My whirlpool refrigerator relay switch caught on fire and customer service told me that my model wasnt on their list of problems refrigerators, but they know there are a lot of units out with the chance that it could start a fire if anyone has a whirlpool product refrigerator. I would call 1-888-923-8502 and check to see if it is on there list to replace the switch.

We purchased a Whirlpool Cabrio about 3 years ago. Have never really like it. It doesnt add enough water to the wash cycle unless you use the bulky setting, which fills the tub up the entire way, so wastes water. It would have been nice to choose your water level like you could on the old machines. Now it wont drain completely and wont spin totally. Ive tried using the drain/spin cycle 2-3 times extra and it still wont spin all the water out. Ive noticed that there is still water in the drum, you can hear it slosh when you move the drum, so I wonder - has anyone ever been told there is a filter in there somewhere that might be clogged keeping it from draining completely? My husband thinks that maybe all the water in the bottom of the drum is not letting it spin because its throwing it off balance. And yes, it stops before the cycle is complete and just sits there and blinks and you have to unplug it to clear the cycle. What a pain. We will never again buy a Whirlpool and I absolutely do not recommend Whirlpool washers. I have a Maytag as well and have not yet had problems with it. Bought it at the same time we bought the Cabrio (2 households). At least the water levels in the Maytag are a little more normal. You can wash more than 1 pair of jeans and get them clean in the Maytag. For those of you with the problem of the clothes not smelling clean - try running the clean cycle with a cup of bleach about once a week. No clothes in it - just a cup of bleach in the bleach dispenser and nothing else. Works for us.

This machine (Cabrio) is a piece of junk. It does not fill up with enough water to cover the clothes, even on deep wash and your detergent will still be sitting on top at end of wash and clothes are not clean. It was a $900.00 machine. We need to file a class action law suit. Worthless waste of money. Anyone know of any remedies to get a new machine from Whirlpool or of any class action suits?

We got a DEAL for this nightmare for nearly $700 back in 2014. Nothing but problems. Constantly finding plastic pieces at the bottom... some identifiable; others not. They are from the cheap parts within. The control board lights (all but 1 works) went just after the 1 yr mark. We are now having to replace the top Rack Adjuster (MORE CHEAP PLASTIC), as it has been barely hanging on for the last year and a half... constantly fighting it, as it would drop all the dishes if you moved it wrong.Now, the water is not draining at all... period. We clean this religiously - always rinse dishes completely, use rinse aid, never stuff dishes. Today we find a random plastic piece, which we are now trying to identify. NOTE: we dont put plastics in the dishwasher. So, today a new plastic piece and major drain problems. We are in the market and purchasing a new French Door Refrigerator and Front Load Washer. Will NOT be going with anything Whirlpool. Not much better these days, but this name has a big RED NO for us. Made it even worse when we contacted for help after that 1 yr mark. NO HELP AT ALL.

We have always bought whirlpool appliances, and trusted the name. We can put a man on the moon but we cant build a reliable bottom freezer refrigerator. My previous refrigerator was whirlpool. 19 yrs old when it went out for a new whirlpool bottom freezer fridge, 2014 Jan. 14 months after purchase, no warranty. The temp in freezer and upper compartment would increase and stop making ice. At first, we thought it was the icemaker. Repairman NOT FACTORY TRAINED, THIS IS VERY IMPORTANT.. Came and looked at it said, yep, icemaker. Plugged it in after 4 days. Just like brand new - making ice, not the icemaker. About 4 days later same problem - temp increasing. Called the store where we purchased it, sent the same repairman. He said it was a cooling fan. This went on for 2 months trying to figure the problem. Well, we cant rebuild a refrigerator out of parts it doesnt need, so we called a FACTORY TRAINED TECH who diagnosed the thermostat and defroster in the bottom of fridge taking two screws out and pulling bottom freezer out. It was iced up. Cost to fix it - 522.00. So I called whirlpool corp., explained problem. They agreed to pay for parts if we paid labor, 100.00. This is doable. However, if we continue to have problems after this, we will purchase a top freezer fridge, no ice maker because they constantly break down.

If you are in the market for a new refrigerator, STAY AWAY from Whirlpool Top Freezer models. Mine just failed after only 5 years and Whirlpool will NOT do a thing about it, except ask, Did you buy the extended warranty? The compressor in my refrig was made in Mexico by a company called Embraco. I used to work for Whirlpool and these compressors were garbage then, and I guess still are, in my opinion.The 5 year sealed system warranty was removed from these refrig years ago and I can only assume this is why. If you want the 5 year SS warranty, buy a side by side or French door model. Just be sure it doesnt have an Embraco compressor on it! And while I am not a believer in them, planned obsolescence dictates you probably should buy the extended warranty/service plan for such a purchase. Dont rely on positive past experience, even for a company like Whirlpool. Their gold ring of promise emblem is very tarnished for me now.

Bought it May 2019 and till now 3 times it failed and every time it takes 3 weeks to fix. As someone mentioned the Technician never sent with the possible parts and it takes another week to get the part. Whirlpool refuses to replace the bad product. I will never recommend this product to anyone whom I know want to buy a washer.

I purchased a Whirlpool Duet front-loading washing machine on September 27, 2010. By October of 2011, it was making a loud grinding noise during any spin cycle. I called for service and was told I needed new bearings which entailed rebuilding the machine. I had purchased a 5-year extended warranty. I was originally told by the warranty company they would replace the machine.After waiting two months, and after several contacts made by me to the retailers customer service, I was told the machine would not be replaced, but repaired. After the repair, on January 6, 2012, the machine now rattles and shakes so much during the final spin cycles. It is literally impossible to have a conversation with someone standing next to you in the same vicinity as the washer, it is that loud. I am sorely disappointed with the Whirlpool line of products and with the retailer who has been dragging their feet on customer satisfaction.

I bought three Whirlpool appliances (fridge, gas dryer and washing machine) from Abt in June 2012, delivered in July 2012. The fridge has not cooled from the moment we plugged it in and because I am out of state from Abt (IL), I have to deal directly with Whirlpool. According to both the Whirlpool customer service rep and her supervisor, if a product is defective from the start, Whirlpools policy is to try and repair it until they determine it to be scrap and only then will they replace/refund. I find this policy appalling since I paid for a good working product, from a company Consumer Reports rates very highly, but was shipped a defective one. Now, I have had two service visits, the second because according to Whirlpool the first technician did not perform the correct service. I have been told not to put anything valuable into my freezer for 5-7 days because most likely I have a coolant leak and the fridge is bad. This is terrible customer service and instead of fixing their error which is the purpose of having customer service, they are quickly building a reputation for a terrible product and terrible service. Good customer service would be replacing the defective fridge as it is clearly their manufacturing issue, taking the item back to their warehouse, repairing it if possible and selling it as reconditioned for a discount. I am noting my suggestion in case any Whirlpool representatives read this website. Another interesting item to note is the gas dryers absorb air from the environment around them so if you do any painting (full room or touch ups), the clothes that come out of the dryer may have a burnt/gas smell for up to 7 days. I am still waiting to hear back from the Whirlpool technician as to my burnt smell problem/resolution, but was told this from a separate service representative so I thought I would pass it on.

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

Appliance repairman is coming tomorrow. Washer is less than 2 years old and will stop mid-cycle more than once (I re-start it)... At first when I thought the cycle was done I would get ready to move the clothes to the dryer and realize they were all soapy and sometimes they were just massively soaked so something is not working right. Sensor?? Hopefully not the computer panel as that will be too expensive to repair.

Our 2.5 year old Whirlpool top loading clothes washer started leaking from the bottom, enough to form a sizable puddle that ran under the dryer all the way to the wall. It was still under warranty so we called the company and they recommended a repair service. Guy came couldnt really identify the exact problem but said hed order parts to stop the leak. That was 6 weeks ago. He cant get the parts despite us calling about every week to see if the parts came in. So for the last month weve been taking our clothes to a laundromat. There seems to be no end in sight to this problem. Seems stuck between Whirlpool and the repair service and were the victims. And, oh yeah we got a note that says our warranty is ending soon.

I wouldn’t recommend buying Whirlpool appliances. Hot dishwasher in December used 1 month and the board went out. 3 month to get a new then they install it and they sent the wrong user interface. Wait another month. Still no call. No dishwasher. Everyone I know has issues with Whirlpool appliances that are branded as made in US yet if they truly had good components that were made in the US they would get more customers back.

I purchased a Duet several years ago and did not have a clue as to the problems everyone was having. Over the course of ownership I called the city to determine if we had a sewer leak. I had a plumber inspect our pipes. I felt really stupid that it took me this long to figure out it was the washer. I knew it smelled like mildew and have been using vinegar, afresh, Clorox until I am blue in the face. I didnt figure out that the sewers smell was also the same as the washers until I got on line and read about these machines. Finally, I lifted up the gasket around the door and it was completely black with mold. No amount of afresh was going to fix this problem. Do not purchase these front loaders. Feel like they should have been recalled and I really dont understand why they are still in circulation. I have also been having health/breathing issues and I cant help but think the mold is causing my illness.

We replaced our kitchen appliances and went with Whirlpool. The oven and Refrigerator havent had any issues yet but the dishwasher has been crap since it was installed. While it looks 10 times better than my old dirty dishwasher it replaced, its main function of washing dishes is 1/4 the of the quality after running two or three times. Not to mention the average cycle time is 4-8 hrs. Dishwashers by design, should be convenient and save time. Whirlpool managed to remove both of those traits from this Dishwasher and now their warranty service said they can send out a technician but I will have to pay for it if it’s not covered under warranty!

Our home came with an Asko dishwasher, theoretically a premium device though the experience was not the best. Anyways, had to replace it after a few years and decided to buy a Whirlpool under the assumption that if an Asko kind of sucks, being so expensive, it was not worth the money to spend big bucks on an expensive dishwasher. I could not have been more wrong! Bought a middle of the pack Whirlpool, I think we spend around $500. Complete junk. I had to use our Sears home warranty like 6 times. They replaced two times the computer board, all the sensors another couple of times, motor, you name it! Worst part is that all of the non essentials part that also broke off (wheels, and plastic pieces of the door) were not covered by Sears warranty so I had to end up using glue and all kind of contraptions to keep them together. Finally, when we decided to put our house in the market we replaced this junk with a Bosch. So far so good. Whirlpool actually never even washed properly, now with the Bosch we finally know what it means to have a dishwasher that really washes for real!

It seems the quality issue of the LED of the washer Whirlpool Cabrio. It was broken from the screw part of the glass and the plastic/alloy and the glass. They would charge me $416 to replace the LED but I rejected and was still required to pay $85 for labor fee. I called the company and they didnt admit that was a quality issue but I just found many consumers had the same problem. If someone would like to have a lawsuit, please contact me and I will join.

This washer is 5 years old and the top is rusting out on the inner rim. I have city water that has been tested and found to be totally safe to use and drink. Neighbors using the same water and owning different brand washers have no rust problems. Does anyone else have the same problem with their Cabrio washer?

We bought this Whirlpool he washer two months ago, and it is the most aggravatingly frustrating washer weve ever had the displeasure to use. There are times when it washes just fine, but I always have to put the mode on deep water wash because the normal mode uses very little water (like its supposed to) but it doesnt clean the clothes. However, most of the time it doesnt wash at all. All the lights will turn off and youll hear this sound and itll drain the water without having been in the wash cycle. Worthless piece of equipment! I prefer the old washer where I have more control. Whirlpool used to be such a good brand, What Is Happening? The new design for their washing machine nowadays generates a lot of complaints, and with good reason (because they suck).

On December 24, I was planning my annual Christmas Eve dinner when my oven just decided to quit working completely. This was the third time my oven broke down on me. I called Whirlpool and they pretty much told me theyll get to me when they can but it was the holiday. So I understood that it would be a few days. I had a technician come out to my house on December 27 and tell me that he needed to order a fuse. He called all over the state to find one but no one had one so he put it as an emergency. The technician did everything he could to accommodate me but could only do so much. So I waited and waited but heard nothing.Today, January 3, I called the department to see when my part was going to be here and they tell me January 10 - unacceptable. I called the management team and spoke with Tiffany who pretty much just told me, Sorry. You have to wait five business days to find out if the part is available. If not, then we can discuss sending new ovens. Why would we have to wait five business days from January 3 when it was ordered on December 27? Look, Im a very reasonable woman and this is the first time I have ever complained online about a company. But I have gone 10 days without an oven and I have a family that I cook for daily.My ovens are four months old so this should not be happening. And when it does, there should be parts to fix it or a replacement on hand because no family should have to go without an oven when they just paid a ** load of money for it. Customer Service should be a little more sympathetic and a little less about business because at the end of the day, theyre not the ones suffering, we are. Also if this part is on back order, that tells me that this probably happens often. Maybe Whirlpool should recall this oven model because whoever heard of an oven overheating? Get it together. I will spread the word of mouth about my experience!

This is a good size fridge/freezer with double doors 25.4 cu ft, its given us good service for 13 yrs without any problems. My only complaint that I wish it was more quiet. (Whirlpool brand) double doors, ice maker w/ water and lights.

I purchased a Whirlpool French Door refrigerator (G16FDRXXY07) from h.h.gregg appliances and electronics in Columbia, South Carolina, on August 3, 2012. It was delivered and installed on August 11, 2012. It functioned well for three weeks, and then temperature of refrigerator dropped to 25F. Vegetables and eggs got frozen. I made a service call to Sloan Appliance Service as soon as I was aware of the problem. In the 3rd visit, the thermometer was replaced after troubleshooting. After replacing the thermometer, the temperature of the whole refrigerator got higher than it was supposed to be. Refrigerator got around 53F, and freezer got 34F. All foods in the refrigerator got spoiled. In the past six weeks, the company sent technicians to my house to check the problem, and they tried to fix this refrigerator for 5 times. The situation got worse and worse. I have not had a functional refrigerator for 6 weeks. A technician came with a compressor on 10/22/2012 to see if replacing it could fix the problem. When he cut the copper pipe, he found that refrigerant was leaked out. There is no refrigerant at all. He refilled refrigerant without changing compressor. Because he thought the leak was slow, it should be caused by the evaporator. He thought it should work and last long enough when a technician comes back with evaporator replacement. It turned out what the technician thought was wrong. The temperature of both refrigerator and freezer did not drop to normal, 53F/34F. The problem persists. I called Whirlpool customer support line several times. The response I got was that Whirlpool would not replace for having manufactured a faulty appliance during manufacture warranty. They can only keep sending technician onsite to check and repair. For 6 weeks and 5 times onsite visits/repairs, this newly purchased refrigerator still does not function.

Whirlpool is an absolutely terrible company. I bought a stove and a microwave. The stoves lower drawer would fall off its track every time I opened it because it only had a single track at the front instead of one that went to the back to keep it stable. It scratched my baseboards horribly and was a huge pain. When I called to complain, they said they had no record of such a problem and were completely useless, despite the fact that the store I got it from acknowledged having the same problem and said that Whirlpool came out to fix it for them. Maybe Whirlpool only helps corporate customers so they can keep fooling people into buying their unbelievably ** products. The plastic casing around the microwave door handles started cracking (first the bottom cracked and a large piece fell off and now the second is cracking). I called to complain and was informed that because this was happening over a year after purchase (the microwave is 1 year and 2 months old) they couldnt do anything about it. The last time I checked, appliances are meant to last longer than a year before they literally fall apart. What a joke. I will never buy Whirlpool again and I will make a point of telling every single person I ever know whos buying a home to avoid their products as well. What an epic fail.

Have used washer since 2005. Still runs today. Minor repairs done. Is reliable brand. Whirlpool gold model washer purchased at navy exchange. Will buy another whirlpool again. Have bought other brands which lasted 7yrs and then needed replacing. This whirlpool is the best. Lasted 15 yrs and still working fine doing 5 loads a week.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

It started getting warm and wasnt getting any warmer. Model number ED2VHEXV001 22 cubic feet side by side. I read another review and it sounds just like mine, OMG. It better just need something, its less than three years old. I am not happy and I always bought Whirlpool, my first trouble with it.

We purchase a washer and dryer from Lowes in 2012 and a couple months ago I begin to notice that the Clorox and the softener draining spout is not working. The Clorox side is full of water, and the softener half of the time dont even drain all the way and not happy with that. The washer is beginning to rust on the inside by the dispensers, the lid area and the outside panels. I should have purchase GE. I would not recommend this brand to anyone.

Purchased on 7/9/18, was alerted of gas leak on 11/24/18, gas company had shut off gas to the unit. After finally getting through to their customer service in December, they scheduled an inspection with a local repair company they contract. It is now January 15, 2019 and I still have not had any resolve to this. Whirlpool is washing their hands of any responsibility, and doing nothing to help find a solution for a defective burned out piece in their oven, which the repair tech said he’s only seen in units over 10 years old. I do not feel confident or safe about this range. I bought this new from Best Buy, 4.5 months of having this in my home, after 1 oven use this happens.

I have a 4.5year old Cabrio washer. Ive replaced the water pump 3 times due to a weak plastic part which keeps blowing out due to pressure. Now, the unit is leaking rusty, black fluid from the bottom. I purchased it at HH Gregg in Indianapolis, In. Svs tech called. They have never seen this on such a new unit. Parts and labor will equal $400.00. Calling whirlpool customer care did nothing. I offered to pay the labor of $100, If they would be willing to pay for parts. Talked to a supervisor who offered to sell me an extended warranty costing $300.00. I am a stock owner in Whirlpool, no joy, dissatisfied with faulty product. They are unwilling to make this situation right. The unit is poorly made. I think a $800 unit should last longer than 4-5 years. In 2006, Whirlpool stopped offering a 5 year normal warranty on their units. Supervisor would not let me talk to anyone else.

I purchased the Whirlpool touchscreen gas convection range and I do not recommend this product at all. The oven cannot operate without using the touchscreen to set the temperature and it has a mind of its own. Woke up in the middle of the night and the oven turned itself on to 550 broil. I called Whirlpool, they sent a tech out who replaced the touchscreen and the same problem is happening. Not engineered very well. The range would have been fine without the touchscreen, if only it had an old fashioned knob to set the temp. I do not recommend buying this appliance.

The washer worked well the first year and has gone downhill since. There is mold on the rubber seal where the door closes. This was supposed to be a recall and was never sent the replacement part. We have to constantly use bleach to clean the rubber.

We bought a whirlpool water heater about two and a half years ago and started having problems with the pilot light going out. The gas company said that these have been recalled but he was wrong its the 2005 year. Sure we will have to buy a new water heater soon.

We purchased the Whirlpool refrigerator (model ED5LVAXVQ00) 4 years ago. The plastic around the top shelf cracked within two years but is not a warranty item. Now, all the plastic surrounding shelves have cracks and the slides for the pull out drawers are also broken. My wife and I are retired and have not overstressed the shelves. The cost for replacing the cracked plastic will be approximately $250 (hardly worth fixing)! We are very disappointed that a once reputable company would build and market such an inferior product. I hope this comment will warn prospective buyers to be careful when considering Whirlpool refrigerators. Very disappointed!

Whirlpool Water Heater bought May 2011: Water heater not heating. I called Whirlpool and they stated the equipment is under warranty but not the labor; $137.50 for 1st hour of service. Troubleshooting is a joke. It just doesnt heat. Waiting on the 3 plumbers to call me back. They are busy. Water heater went out Sat morning and Whirlpool doesnt open until Monday. Its Monday at 5pm and Im still waiting on a call back.

The oven is a joke. It does not self-clean. I have to buy oven cleaner and clean the oven like in the distant past. They are lying about it being self-cleaning. Do yourself a favor and buy a real self-cleaning oven. NEVER WHIRLPOOL.

I had purchased a hot water heater on Saturday and installed it myself. I filled the tank and waited about twenty minutes before turning the power on. I waited a couple of hours before testing the water temperature and it was cold. I checked the temperature setting and it was set at one twenty five, I went to Lowes and informed the service person and was told there was nothing they could do about it, I had to call the number on the tank for Whirlpool. I called the number and was told they could come out to check it but we would be responsible for the labor charges. I didnt understand why because it was under warranty and we had also purchased the extended warranty. I informed my wife so she could deal with Whirlpool because I was going to work. My wife called a number of times and was getting transferred from one person to another and getting no help at all. She was told by one person that it was maybe a problem with the wiring in our home or maybe the plumbing. One person told her that it was not their problem. We had to finally pay an electrician to come out to look at it and had to pay him to replace a heating element. The cost of the electrician and the part came to an extra two seventy five dollars. The only real help that we received was from Lowes managers that were willing to take the water heater back if we could get an authorization number to return the water which Whirlpool claimed they did not have any type of a number. Our 400 dollar water heater turned into an almost 700 dollar water heater. We had also purchased a refrigerator from Lowes that was the Whirlpool brand that quit working after about four months and we had to pay to have it fixed. Needless to say, we will never again purchase any Whirlpool products or recommend them to anyone. The service was very very poor and we are not happy with Whirlpool.

In August 2012 I purchased a side-by-side fridge with indoor water/ice dispenser. The appliance was purchased from Sears and delivered and installed by their employees or contractors. In November 2014 the refrigerator abruptly stopped making ice and began continuously cycling through the ice making process without creating ice cubes. Repairman told me the ice maker needs to be replaced for $300. He stated the control board went bad and the only recourse is an out of pocket replacement of the entire ice maker. A two year old fridge. The fridge has never been moved, abused, misused or dirty. It has only been used in a two adult home under normal household conditions. I would have thought an item that cost $1000 would last longer than two years!

Soon as warranty expired issues with product. This should not happen. Made in America, washer making too much noise. Products cost more but poor quality. What is this company going to produce? This is the world we live in.

We purchased a Whirlpool Energy Smart Electric Hot Water Heater with a 12-year warranty from Lowes on August 30, 2010. The water heater stopped working and the green light was flashing three times. We contacted Whirlpool since it was less than two years old and they were very rude to us. They told us it was the sensors and we would have to change them out. We waited while they sent the sensors to us. We installed them and it still would not work. It continued to flash three times just as before. We contacted Lowes where we purchased it and they were extremely apologetic and said they would be glad to replace it if we could get an RA number from Whirlpool, but that many others have been having a hard time dealing with Whirlpool. We contacted the rude people at Whirlpool again. They said they were not surprised that the sensors did not fix it. We asked for an RA number so we could get a replacement (after all, it did have a 12-year warranty). Now we were days later with still no hot water. Now this rude technician said it was probably the control board. I asked him if we were going to have to be without hot water until we changed every part on the unit. At this point, we just took the hot water heater out, put it on the curb, and went and purchased a different brand. Whirlpool has lost us as customers for life. If their other products are as horrible as that hot water heater, I wouldnt take any if they paid me to. They were by far the rudest and most hateful people we have ever dealt with and life is too short to be treated that way. I predict they will be out of business in no time with the garbage they are putting out.

My Whirlpool side-by-side refrigerator is just 4 years old. When they delivered it, they noticed damage on the bottom which required them to bring me a new refrigerator. The new one had issues with the ice maker that required multiple service calls to fix. The refrigerator door always seemed a bit misaligned as it was a bit lower than the freezer door, but it closed, so I never complained. I was just tired of all the issues! During the last six months, the door started to remain ajar instead of closing completely so that we had to always be sure to apply sufficient pressure to close it tightly. I considered calling in a repair, but it was still closing so I thought I might be overly critical. As it got worse, I realized the door was defective, but one day, it just fell off completely without warning as though the hinges were made of butter!After multiple service calls, a tech reattached the door, but I could see that it would not hold and sure enough, it is starting to remain ajar again. I have contacted the warranty company who is now saying the service tech claimed we were hanging on the door. This repair company the warranty company uses has an F rating with the BBB. Now, Im being told it may take a couple weeks to get another repair company to give them an opinion, but the issue is clear, the door was defective and it looks like they found a way to avoid having to make good on the warranty!

Purchased front load washer & dryer 2009 - have had issues with the washer ever since. The last episode has taken 3 visits from repairman - they cant figure out what the problem is - wont finish a cycle (any of them) and locks up. Cant open the door without turning it off and then back on. But the load wont spin dry - leaves clothes wet. Already had the harness replaced a couple of years ago and now they replaced the flywheel (it was warped) thinking that was the problem. Nope. Still wont work & the repair company said they cant figure it out & neither can Whirlpool. Im very angry after reading all of these posts about Whirlpool. Not a happy customer. But what can you do???

When my wife and I were planning our retirement, we made a to-do list before we officially stopped working. We are loyal Whirlpool users and over the next 3 years we purchased 4 major Whirlpool appliances in preparation of having 8-12 years of problem-free time as we go from a two-income working family to two people on fixed incomes. I retired in December of 2011 and unfortunately this did not pan out on 2 of the 4 appliances. The washing machine, in late February 2012, blew a transmission 23 months after purchase and 11 months after the warranty expired. Discussions with Whirlpool by phone were unsuccessful in getting the repair covered.Ultimately, this repair cost us $265.00. In late April, 9 months after the warranty expired, the refrigerator iced up and had to be manually defrosted, despite being equipped with ADS. My family and I did the defrosting because it was a weekend and tech support was not available. On Monday, the refrigerator was functioning, so I was told to run it and see what happens and call the tech if it happens again. I had done research online and found many folks were having trouble with this refrigerator model and the main problem was the control board”, a board that is used in many Whirlpool refrigerators. I ordered one after the initial problem and waited for it to ice up again. On Sunday, May 20, it repeated the same symptoms displayed and I put the board in myself and it solved the problem. This computer board cost me $95.81.I contacted Whirlpool about the two premature, post-warranty expiration issues in hopes of getting some reimbursement for the repairs. The Whirlpool rep told me that because there had not been a recall on either appliance, they could not reimburse me. They instead offered me a 6-month extension on the dishwasher I bought last July. I have been on several complaint websites and have seen the refrigerator control board repeatedly mentioned - all within the approximate 2-year timeline as my control board failed. My refrigerator was a GB9FHDXWQ01 model, but the control board is used in many of their refrigerators. If this has happened to you, please contact me at ** and, hopefully, together we can get enough data to get a recall and get proper treatment from Whirlpool. Please include your refrigerator’s model number so I can verify the board is the one in question. Thanks.

I purchased a Whirlpool Cabrio washer (WTW6500WW1) on 9/11/09 for approximately $800. Now three years later, it needs a new rotor and stator costing $470 in parts and labor. I called Whirlpool and was told I could get no help with the cost of parts because of the age of the machine! A simple Google search of the F51 error code that I am getting will show you that these machines are $800 pieces of junk! I am not repairing this machine. I am going to run it until it dies and simply buy a new washer. You can bet your sweet self it will not be a Whirlpool! I can only hope to inform enough buyers about this to keep them from the same fate.

It’s a great stove. I love the glass top. Only dislike about mine is that it doesn’t have the self-cleaning option. I’m very weak in arms and have back injury so bending over to clean it myself is not possible.

I just bought a Whirlpool 50-gallon water heater from Lowes because my old one took a turn for the worse. I brought it home, installed it just as the directions said, and immediately got an FVS fault detected code as soon as I plugged it in and tried to ignite it. This is by far the worst experience I have ever had with an appliance. And wouldnt you know it whirlpool service center is closed on weekends. What an absolute piece of trash. Im draining it and taking it back ASAP. Lowes and Whirlpool just lost my business for good.

Bought a whirlpool water heater less than two years ago and it has already failed. I could not find parts for it and was told by a lowes employee that I would have to call whirlpool on the 5th of July (three days away) to order any parts. I tried three plumbers in the Indianapolis area and they all told me that I would be better off replacing it with a different brand. I just put in a new rheem in its place. I will never buy another thing from whirlpool. They are no good.

Broke within a year, company wouldnt back its product. Went out for another range, chose a different brand. Make sure you know the companys policy in case of breakdown. Sometimes, even though it might be an off brand, might turn out to be the option. Think outside your norm, listen to employee, other consumers. Just because its on sale doesnt mean it actually does its job.

I have recently installed a Whirlpool water heater and was thankfully home when I heard a pop sound and my water heater had exploded inside. The heating element also caught fire. I called customer service and was not satisfied with the response from their customer service team.

Purchased Cabrio set last year. Worst set I have ever owned! Clothes do not come clean. Takes forever to wash. Must wash multiple times to get clothes clean, even on deep water settings. Does not spin water out of sheets and blankets. Dryer dries unevenly. Waiting on repairman because dryer will not come on.

Fridge is over 20 years old. Definitely got money worth. Need to replace all appliances soon??? Which model next. So many models to choose. Love one with freezer on bottom.

We purchased a Whirlpool Refrigerator Model Number WRS555SIHZ06 Serial Number HRA2506806 on July 15th 2021 from Lowes. First one from Lowes came off the truck damaged so working out of a cooler in the kitchen for 2 more weeks. Now 4 months later the compressor is out and all the food spoiled like $400 bucks gone and food is expensive these days. I called and Whirlpool said no food allowance and no replacement. Fridge can be brought over - so repairman will come out in 6 days and then say he has to order parts then I wait two more weeks then the repair. So 3 weeks without a fridge with the holidays coming up and people to feed and food to cook. This is going to be interesting. I hate Whirlpool Refrigerator - never again will I purchase one of this appliances. The GE I had for 12 years and no problem at all for 12 years. What is going on with these companies????

We purchased our Whirlpool french door refrigerator with bottom freezer from Lowes. A few months after purchasing, we noticed a pool of water on the floor, resulting from what looked like a leak coming from the ice maker. After contacting customer service, they sent a repair company to service the fridge. This rep stayed no longer than 5 minutes and barely looked at the appliance. He said my refrigerator was not under warranty, which was **, as I personally registered the refrigerator the day it was. My kitchen floor is ruined as a result. I will NEVER purchase another product from this company again. They seemingly left a faulty product on the market and failed to inform me about the known issue. Then they failed to quickly provide needed repair or replacement in a timely manner. They also refuse to reimburse me for the food loss, which would not have ever occurred had they handled the issue appropriately from the beginning. TERRIBLE company. In addition, since Lowes is aware of the reputation of this company and continue to sell their defective products... I will not be shopping at Lowes anymore! Both this companies should NOT be in business!!!

Self-cleaning oven system DOESNT WORK AT ALL! The company rep I talked with said the system only works on lightly soiled oven and doesnt clean at all on the oven top or sides. When I explained that my oven was less than lightly soiled (I rarely use it) and that I had run the cleaning cycle twice and none of the soil was affected. Apparently the company is aware of this problem and I believe customers should be made aware of it BEFORE purchasing. I was told there was nothing they could do because my appliance is out of warranty. I asked if they had received other complaints and was told they had. I am not surprised.

Whirlpool® Gold® 5.8CuFt Capacity | GAS Stainless - This was not an inexpensive stove. The self cleaning oven function is a total failure. You are not supposed to use oven cleaner on the glass, it now has obscured the view into the oven. The top of the stove is very difficult or impossible to clean. The knobs are a dangerous issue. They will fall off at the slightest touch and the stainless markers around the knob are just a stick on label. The oven temperature is not accurate. The bottom drawer is completely rust spots on the inside. What more can I say. Oh I know. Whirlpool your quality is a disgrace and I want a refund.

We have the four-door model, french fridge part, drawer, and bottom freezer. Overall has been a good appliance. Icemaker burned out in third year. Icemaker replacement is very noisy, popping and groaning during drop-out and refill. Noise level otherwise is average.

I originally brought this to the attention of Whirlpool on February 27, 2014, and they chose to ignore the matter I raised. I am appalled at their customer service, but then again, customer service has been dead in America for decades now. I purchased a KitchenaAid (Architect Series II, Model KERS807SSS02, Ser. XW4704146) oven in 2009, which included a 5-year extended warranty. The first time I had to use my extended warranty was the first time a pot overboiled and thus overflowed covering the top of my range. Since then, Ive had to have my oven serviced two other times, but resulting from a pot which overflowed on the range.The controls are located in the front, directly below the stove top. There is most definitively a flaw in the design of the model I purchased. It seems quite obvious to me that the design should have included protection from moisture reaching the controls. It is very common for pots to overboil, from time to time, and thus overflow, but this should not cause the controls to malfunction due to seepage. Had I purchased the model that had controls behind the range and controls above the cooking surface, moisture would never reach the controls when a pot overflows. It should not cost hundreds of dollars each time a pot overflows on a range. Had I known that the oven model I purchased had a design flaw that allows moisture to reach the computer controls of the oven, I would have purchased the oven with the controls above the cooking surface.I invested over $2K on this oven because having owned KitchenAid appliances in the past, the KitchenAid brand had historically proven reliable. KitchenAid (or now Whirlpool) can no longer take pride in the quality of their products, most likely relative to the loss of manufacturing jobs in the U.S. Whirlpool ignored me the first time I contacted them on this matter and most recently today when I was told that it was a use matter. Apparently they believe that an overflowed pot is not a common occurrence on a range. I wrote directly to Jeff Fettig, CEO of Whirlpool and he has chosen to ignore me.

Whirlpool White Ice gas range with aqualift technology. Whirlpool uses a self-cleaning technology called AquaLift to clean the oven. It does not work. It does not clean the oven no matter how many times you run the cycle. I have contacted Whirlpool 3 times and they did respond. They first suggested buying their oven cleaner. I purchased the oven cleaner and it did not work! They then said that aqualift will only clean the bottom of the oven (it does not). Who buys a brand new oven that does not have a self-cleaning feature? I read reviews online prior to buying this oven and unfortunately for me, there were no bad reviews. However, I just checked again and there are numerous reviews stating that aqualift technology did not work for them either. This oven bakes but it does not clean and Whirlpool will tell you not to use oven cleaners in your gas oven because they will damage the surface of the oven. I currently have a very dirty oven and no effective way to clean it! Do not buy this oven if you want a self-cleaning oven. This oven should be recalled and money refunded. I would never knowingly buy an oven that does not self-clean. This Whirlpool with Aqualift is not effective and the company had to test this before it was marketed. I do not know which brands to recommend at this point as I am stuck with a Whirlpool gas oven that does not self-clean. The oven is only 1.5 years old so I will be stuck with this oven for a few years. Do extensive research before you buy any appliance.

We bought a new Whirlpool just 3 years ago. The first year under warranty, we made several calls for repairs on the water and ice dispenser. The water was never cold and never fixed. Just after the warranty expired, the water stopped dispensing completely and now the ice will not dispense. We bought this refrigerator to have cold water and ice at ease, but it never happened.

Recently bought and had a Whirlpool Cabrio Washer (from Orvilles appliances) installed in my home. The very first day I hated it. Worst purchase I have ever made. I spent over an hour picking hair out of my clothes, and hair was also stuck in the crevices of the drum. This is the very worst machine and company I ever had to deal with. They told me, Too bad. Since there was no mechanical problem there is nothing they will do. I will never deal with either of these companies again. I cant wait to see what the hair build up will do to the machine itself, Had it less than a week.

I would like to share whirlpools lack of ownership for parts they knew were faulty that caused significant damage to my floor. Its absolutely horrendous that one would purchase the highest end dishwasher they offer (all highest end appliances in 3 homes so far) and the company is only willing to cover the replacement of the part. Its a horrible way to run a company. I hope that my review will warn prospective customers to stay away from a company who is only willing to take your cash at purchase (charging an arm and a leg no less) and not care about any repercussions after the fact. I hope they enjoy our 15k, because it will be the last penny they get from us.

On October 29, 2009, we bought a new Whirlpool 30 gallon gas hot water heater to replace a Rheem we had for 20 years. We immediately had problems with the relief valve leaking, so we ran at the local hardware store and bought another valve. Next, we had trouble lighting it (husband was a plumber years ago) but a call to the hotline and we were in business. Now just over 3 years later, the pilot light started to cut off at will. Troubleshooting solved nothing. We called the hotline again and were given a part number, an authorization number and told to go back to Lowes for a replacement part. Figuring how our luck runs, I called first and was told there was no such part number. Trip saved. Now after reading all of these reviews, we have decided to cut our losses and buy another Rheem. You can find the Whirlpool hot water heater sitting beside our 2-year-old Kenmore HE washing machine (also made by Whirlpool) on the garbage pile. No more Whirlpool!

After 3 short years, my dryer that cost me over $900 is not working and the part needed for the repair is no longer being manufactured. They did offer the parts for free, but that was useless since they arent available. They then offered me a new dryer which would cost me $800. I am currently waiting for the Product Exchange Team to contact me. Im not hopeful that will be of any use.

Very concerned. First the microwave broke. It seems that is burning on the inside. The model number is MH1150XMS-2, purchased in 2005. I have had to replace the plate. I have read of many recalls, because of the potential of fire. My model was not among the ones on the recall list.

Bought the Whirlpool Cabrio washer (WTW7300DW) and dryer (WED7300DW1) about 8 months ago. The washer always leaves white debris on the dark clothes - looks like detergent. Except I use blue liquid detergent. It seems like the inside, bottom of the drum is deteriorating and sticking to the clothes, since there is nothing that is white in the washer. I have run it through the clean cycle several times with the recommended washer cleaning product (the brand that came as a sample with the washer). That did not help. Also, we have a dog, our old washer used to rinse out a lot of dog hair from the bottom of our socks, etc. My filter for my drain hose would always have dog hair in it. With this washer, there is no dog hair being rinsed out at all. Lint and dog hair is all through the clothes after the cycle is over. Makes me wonder where the dirt is going, then.The clothes are so twisted after washing. Anything with long sleeves get tied up around other clothes. This seems very rough to wash clothes this way. Also, if you dont use the deep water setting, its likely not to get parts of the clothes even wet. I had a gray hooded sweatshirt go through a whole wash cycle and there were spots all over it that never even got wet at all. The dryer power button is very temperamental. Sometimes I have to hit it 6 - 7 times, at different angles, until I hit it just right to get it to turn on. Other times it just turns right on. There are just 2 of us so I only do 10 - 12 loads of clothes a month. After reading all the awful reviews, I fear that these problems, which are becoming evident now, will only get worse. Yet I only have 4 more months until the warranty runs out.

I purchased this washer about 3 years ago to replace a dishwasher which lasted 20 years. Within a year the racks began to rot, the front panel plastic started to peel off. Within two years half of the racks rods completely rotted away. 3 years later the washer is busted - most likely pump which was probably blocked by one of the pieces of the rack rods. I am replacing it with Bosch - German engineering. Needless to say I will NEVER buy a Whirlpool - formerly reputable company again. Good-riddance Whirlpool.