I called Whirlpool about the refrigerator that I purchased in June of this year and nothing was done about it. My situation is that the refrigerator scratches very easily. It seems that it gets scratch only by looking at it. This refrigerator is very expensive and I not even done paying for it and this appliance looks awful!! Susan the person that I was chatting with just told me that cosmetic doesnt cover and there is nothing that Whirlpool can do about. It bothers me that paying so much money for something that it is poor quality material.

The interior features such as turntable, etc are very cheaply made. As is the case with most Whirlpool appliances, this one is way over engineered to focus on appearance and gadgetry. This is not a good microwave for a serious cook who prefers that the design focus on functionality and ease of operation.

Bought a Whirlpool stove five years ago when I got my kitchen remodeled. In fact bought all whirlpool appliances stove, microwave, dishwasher, and refrigerator. The dishwasher and refrigerator have already had some issues which to me were because cheaply made. The microwave and stove are fine.

We purchased a Whirlpool Cabrio, top load washing machine WTW6600SW back in 11/07. Last week (todays date is 8/19/11), the machine sounded like a plane taking off when it spins out. When the local service technician came out this week, he said that the bearings are shot. Since the tub and bearings are all one part, we were told by the technician that the part and labor costs would be $379.99 to repair it. We originally paid $799.00 for the Cabrio, less than four years ago. Whirlpool would not even give us a concession of a new tub and bearing part as it was out of the 1 year warranty.

We purchased a Whirlpool hot water heater approximately 4-5 years ago and have had problems with the pilot staying lit. I contacted Whirlpool and their trouble shooting included doing a draft test (I am a teacher not a plumber) and removing the closet door that houses the unit. I am very frustrated by this entire ordeal and would like if they would replace the entire unit. At this point I dont want another Whirlpool product. The plumber made a service call at 12 noon and by 3:30 we had luke warm water and by 6:00 pm the water was ice cold! I will never recommend any Whirlpool products.

Whirlpool Gold Fridge Model GR2SHWXP002 purchased on August 15, 2007 for $1,368.77. Only repair issue so far was water leaking from the Water Inlet Valve Item # 949403. I bought a new part on Aug 8, 2011 for $73.45 and replaced it myself. The plastics on the fridge door have yellowed. No smoking in the house so not sure why the plastic has changed colour??? Would I buy one again?? Yes I love the water through the door feature and the automatic ice maker. 10 years old now and no major problems.

I closed on our new home in December 29, 2019! The first issue we experienced with our Whirlpool Oven was March 2020! The first technician who arrive in March 2020 was supposed to replaced two parts, but, one part in her possession was the wrong part that Whirlpool ordered for an electric oven, not a gas oven! Since March 2020, three additional technicians have been sent out from Texas Home Appliance Center, and accomplisnhed nothing! As a matter of fact, the third Technician, Edward, came out to service the oven and all he did was turn the oven on! He had no instruments and did not appear to check on any other issues! Three visits from Technicians later, I finally received a call from a Whirlpool Supervisor, today approximately, 1:47pm CST! Her explanation was the following: The documentation from the so-called professional technicians stated there was no issues with the oven! Even though the oven is still not operational according to its specs! Theres even one part that is missing where Whirlpool ordered the wrong part, ac cording to the Technician. And, we never heard from that Technician again with respect to the followup on the missing part! The Supervisor I spoke with today ~1:47pm today, Dec 9, 2020, stated I was welcome to call again to place a warranty work order, but, if they dont find anything wrong with the oven, I would have to pay for the visit! This is ridiculous on many levels. I will be writing other reviews to influence the public not to purchase Whirlpool Ovens if this is the kind of Customer Service Orientation they will received. This is unacceptable Customer Service Orientation! I have a Whirlpool oven, where 3 techncians have serviced it, and, it still doesnt perform correctly! It still takes 30 minutes to cook a can of biscuits, and, they still required more time in the oven! Whirlpool states if the documentation from the technicians states the oven is working properly, then, Whirlpool cannot do anything for us - even though the oven is still under warranty! UNACCEPTABLE! Ive purchased my last Whirlpool Oven!

Found a crack under a freezer rack from sidewall to back wall. This has caused the refrigerator not to operate properly. Every appliance I own is whirlpool. Bought in 2005. Also bought another in 1994 that is working fine. What surprise me is having a crack in freezer wall. Nothing Whirlpool can or will do! Was a lifetime Whirlpool CUSTOMER. GUESS WHAT? FACEBOOK I GO. 3309 FACEBOOK FRIENDS.

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

We bought this Whirlpool Cabrio washer 2 years ago and have hated it since the first load. It does not clean clothes, and the so-called large capacity will barely clean 5 regular towels. And if you wash diapers, do not buy this washer. If a load is really dirty, you have to wash it 2 or 3 times for clothes to be clean. Then, there is the awful mildewy, moldy smell after a few washes. How can a washer that gets so bacteria-laden be allowed to be sold on the market. Ive been washing laundry for 45 years, and Ive never had this kind of wash-related problems. This washer is an overpriced nightmare. I cannot wait until I can save enough to replace it. And I am watching and hoping a class action suit comes out to force Whirlpool to take these washers back, refund the money spent, and apologize to all the people who purchased one.

I purchased a Whirlpool washer (WTW4800Q) in November 2011. Already, it has rust in the tub. The warranty does not cover this. I never really liked the thing since I have had it. It takes much too long. Lid locks and then starts over. Also, warranty is not good. I wouldnt ever buy their product again and suggest no one else should either. I loved Maytag before Whirlpool bought them out. Im putting this one on Craigslist and buying a real washer, a Speed Queen! Yes, Speed Queen has all metal parts and makes a home washer. Just have to find a local dealer. They are there.

Our countertop Whirlpool microwave oven is just over two years old and one of the led lights in the clock display just went out. The push-button opening mechanism is very hard to work and quite loud when the door is shut. When the timer is set but the start button is not activated for a few minutes, the door warning goes on and you have to reset the timer. There are five beeps that indicate when cooking is done and they continue even when the door is opened. The only way to stop them is to push the stop button and there is no way to adjust the noise level or number of beeps.

Whirlpool Refrigerator WRS526SIAH00. Well we have always had a lot of trust in Whirlpool appliances over the years. Just about everything we have is Whirlpool brand including water heater. We remodeled our kitchen and bought a new refrigerator in July 2013 (just for the color/look change). We have had nothing but problems from day one with the water/ice dispenser water may or may not work. Now (AUG 2015) the refrigerator side started freezing our food, milk and tea gallon jugs frozen solid. Went down a self fix list on an appliance parts website using our fridge symptoms, said it was probably the bimetal defrost thermostat. Replaced that part. It didnt fix it.So I did my own troubleshooting and found the cold air was continuing to push from freezer into fridge area, found this cheaply made plastic damper broke and stuck open. Now that part will cost another $50+. Whirlpool knows about these cheaply made parts they have put in these appliances. You cant even get to this part without taking things apart. This is a cheap manufacturers plastic part and Whirlpool knows it. Its not the consumers fault. It was a joke when we received an extended warranty offer from Whirlpool for just $208 per year or $626 for 5 years - I wouldnt spend another dime with Whirlpool. The price is high because they know how many parts are breaking on these units. You shouldnt have any repairs for 10 years on a refrigerator. We are stuck with a lot of Whirlpool products now, but we are done with this brand. Dont waste your money.

Our over-the-range Whirlpool Microwave (Convection-Type) died 17 DAYS after one-year-warranty expired BUT theyre sending a local repair outlet out to fix it. I am very surprised... Thought Id be stuck with a $700 boat anchor. Thank you Whirlpool for standing-by your product. BTW... My research indicates these microwaves die quickly if you use the convection option very often... So now we know better.

I am a fan of Whirlpool and I think the issues I have with this Duet machine is more because of the style but who knows. This is a front loader with lower water usage. It would have never gotten my sons sports uniforms clean. Never. The gasket around the front loading window frequently clogs so water doesnt drain. And perhaps worse, the drawer where detergent goes stays wet so it had gotten moldy and I didnt realize it. Now I remove the drawer after every wash so it can dry and I leave the loading door open as well. That just seems like a major design flaw and health issue.

I bought my first refrig. on April 2, it was delivered on April 4 this year. Plugged it in---it didnt work. Home Depot took it right back. Delivered the second one on April7th-- plugged it in--- it worked but WAS missing shelves. Home Depot made sure we got the shelf. The fridge worked for 3 months. Died, it has been 7 weeks and a few days for Whirlpool to make up their minds if I am getting a new refrig or if they are going to try to fix this one. The repairman has been here at least 3 times - all of the working parts have been replaced at least once. The model is WRF989SDAmo3 SERIAL NUMBER **. Do not buy a WHIRLPOOL REFRIGERATOR. Whirlpool do not please their customers.

I purchased the Energy Smart Gas Water Heater about a year and a half ago, intending to install right away as part of our upgrades. Just now, I was able to install this replacement to our 30-year-old water heater that was showing problems. When trying to start the unit, I kept getting the response that the lower sensor unit failed. We contacted plumbing companies. We were told they would not work on any Whirlpool models purchased from Lowe’s, because they were the worst hot water heater ever made. I called Whirlpool support. They wouldnt put me through to a tech support person until I was registered in the system. I gave up trying after many minutes of frustration.

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.

I dont know how anybody could write a good review on this machine. It always requires deep water wash and sometimes two cycles to get clothes clean. On regular cycle, it doesnt get water on all clothes. Oh yes, it does save water... Ive pulled things out with dry areas on them.

I bought this washing machine in May 5, 2012 and delivered in July from Paddys Market. We do not use the machine that much because me and my wife and two kids living in the house. Yesterday I put my clothes in the machine and left it to wash it. When I went to get my clothes, water was all over the place in the basement and the machine was beeping and reading code LF. I turn off the machine and turned on back. Water started to fill and then suddenly water started to coming from the bottom of the machine. I removed the bottom panel and I could see the water was coming very fast from the bottom of the basket (the drum shape). I called the private company to repair it and waiting to find out.

Bought Model# wtw4800xq4 washer @ Lowes 9/01/13. Started having problems within months at our beach cottage unrented, our use only, no more than 4 small loads a month. Replaced circuit board, still same problem - stuck in rinse, never drains, wont spin. Another company came out, replaced solenoid. Thank God we bought year extended warranty. Quit again. Have to wring out clothes by hand, rinse out soap in sink. Another company comes, replaces shifter, breaks again. I go to Lowes, demand new unit. They send another company out, broke next day 1 load later. Got new washer from them same model. Within months problems start again. Now broken again. After new shifter 3 months ago, songs like rocks in coffee can. PIECE OF JUNK. CALLING again for service after Christmas. Absolutely disgusted with Whirlpool and the whole lack of admission of design flaws. NEVER WHIRLPOOL, new mantra here.

This machine always leaves me questioning if its going to finish the cycle. It goes thru all kinds of spastic sounds in order to advance to the next step. I learned I cannot presoak a load more than 10 minutes before the machine empties ON ITS OWN! I just dont trust the machine and would not buy again.

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

I purchased a #Whirlpool; 4.3 cu. ft. Mini Refrigerator Stainless Steel BC-127B from @Target. There was a delay putting it into service (6 mos), so the Target store warranty was expired. The unit remained in its factory shipped packaging until put in service, so nothing out of the ordinary there. After barely two weeks of use, the compressor died. I followed all instructions (including waiting 8-10 weeks) from Whirlpool, but still have not received a refund or been given any information beyond we escalated it to our warranty team but havent heard back yet. The unit was a poorly made piece of junk in other respects as well. There are dozens of complaints about precisely this - defective units - on any site. Do not be fooled by the dishonest way that #Targets website lists reviews. Dig deeper.

Yesterday morning I was in my bedroom when I heard a bang... I went in to the kitchen and looked around and couldnt see anything. Then I saw my cat sitting on the floor and looking up at the microwave... It was then I noticed that the glass on the front was all crazed and making a tinkling sound. Several pieces had fallen on the stove top underneath. I had to call the repair man who said he had never heard of this before. He had to remove the door. I could not use my stove with the danger of glass falling in to food. He had to order a new door and I had to spend $65 then. When he puts the door in, it will be another $200 or more.

I purchased the Whirlpool Gold series cook top range-stainless steel. It is of good quality and looks very nice. It is also easy to clean and for the price it has a self cleaning oven. I didnt think that I would like this range but over a period of time I truly love cooking on it.

Five years ago, I decided to splurge on a really nice (expensive) over-the-range microwave during a complete kitchen remodel and had the Whirlpool Gold Velos Microwave GH7208XRS installed, thinking Whirlpool would be a reliable brand to replace our 18+ year-old (still working) Kenmore countertop model that we had used previously. About 4 months ago, after a couple of mysterious cases of the control panel going haywire (turning on by itself in a different modes), it started pouring smoke out the top and service was called and the magnetron and inverter were replaced to the tune of $482.Fine, things happen. Yesterday, while opening the door, the handle snapped off and (upon closer inspection) I noticed cracks around all sides of the door frame - see photos. After reading about similar complaints about Whirlpool microwaves on this forum, I really feel that this is a defect in materials and should be recalled or at least addressed by the company if they want to maintain their reputation. Right now, I am waiting on their authorized repair service to see what my recourse will be.

Bought my 5 door refrigerator from Lowes in December 2016. Was delivered in January. Had a dent in the door so another new one was ordered that arrived in late January. From day one the dual ice makers have not made enough ice for our family. I called Lowes to have it checked out thru warranty. The repairman came out and said Its making ice. I cant fix something that is not broke. He suggest I buy a under the counter ice maker. What the heck! I pay over $3000.00 For dual ice makers and still dont have enough ice to supply my family. Cant believe Whirlpool puts out a dual ice maker in a refrigerator and it cant even supply a family of 5. The repairman said a normal family size is 3. I dont know where he came from but to me thats not normal. He was from Tutor Appliance Repair and was very rude until he realized he pissed me off then he blamed it on Whirlpool. The refrigerator is beautiful but Id rather have my old one. It made more ice than this new one does. Will I buy whirlpool again? No I wouldnt. If they cant stand behind their product and what its suppose to do then I dont need it. Bad thing I have to deal with this one for a while until I can purchase a new and better one. If you have this refrigerator dont plan on having guest or family dinners it will not hold up for ice tea. Not to mention after dinner drinks. Model # WRV986FDEM01. SeriAL # K63817128.

We have these appliances in our apartment. Its a gas range with a microwave over the hood. We did have the microwave replace a year ago, we have been here for 5.5 years. Its a good stove, we would consider buying one for ourselves.

On November 22, 2013 I loaded my Whirlpool Quiet Partner III dishwasher and set it to start. About a minute later I heard an odd noise coming from the machine. I went over to take a look and saw black smoke and flames coming from the little vent area at the lower right corner of the control panel. I opened the door to stop the machine but the washer kept going throwing water all over the floor. I shut the door and ran and turned off the breaker and then unplugged the cord from under the sink. Two different repair service companies said they would be hesitant to try and repair it due to possible unseen damages. I was lucky that I was home when it happened. I could have lost my house to a fire. There is a large consumer lawsuit already in play regarding this very thing.

Purchased a NEW Whirlpool side by side refrigerator (WRS965CIA) and it was delivered on 2-3-14 with a dent in the door. The retail store ordered a replacement door and this order was approved by Whirlpool. 4 months later, I still dont have the door. My 8 calls to the retail store say that Whirlpools Trade partner is not returning their calls or emails to get this resolved. My contact with Whirlpool was met with contact your Trade Partner. Vicious cycle and still no replacement door.

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

Purchased a whirlpool water heater 04/08/2005 and it worked for a short time. It had a 6 year warranty. I had to replace the thermocoupler assembly 1 time and it worked fine until last week. 09/02/1011, 4 months after warranty ran out, the unit started leaking severely from the top ? (Could of understood the bottom) here. After investigating further and being told to basically pound salt by the warranty number I called, I removed the top cove r(glued on by spray in insulation) and carved away the spray in insulation. All the bosses/threaded fittings for the inlet outlet and anode rod were all leaking under the insulation where it could not be seen! I know for a fact this unit was leaking long before the warranty expired! But because of the way it is built it is impossible to see it!. I strongly feel this was a manufacturing defect and there are hundreds if not thousands of these units in people houses all over the country!

Whirlpool Cabrio washer and dryer set bought 5/25/2012 - The washing machine started beeping during the drain cycle and I have to reset it. After messing with it for around 30 minutes I can finally get it to drain. Then last night the dyer started making a loud squeal. I called and it is not under warranty anymore, so I have to flip the bill. My last $75.00 set from a church sale lasted 15 years. I paid $1,331 and this is the worst piece of crap I have ever bought. Lowes will not fix the problem when there is 1000s of complaints. I would have never paid this much, if I knew it wasnt going to last!UPDATED ON 05/15/2015: Whirlpool sent out Appliance Hospital to diagnose the problems. The washing machine needs a new tub, seals, circuit boards, drain motor etc and the dryer needs everything + an idler pulley because the original one disintegrated. The part they want me to buy is the same one that already failed. The cost to fix it, is over the amount I paid. REALLY? Somebody needs to do something to help the consumers. Blogging doesnt seem to help. I am handicapped and I have to go to the laundry mat now because I cant afford another set. DONT BUY WHIRLPOOL.

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

Ive spent more repairing this washer than what I paid for it new!!! Its really ridiculous that Whirlpool isnt more responsible for their equipment that doesnt stand up to their name! Ive replaced more things than I want to type but just to start the computer board, pump, bearings just to name a few. Each time I had my repairman out it was a minimum of $300 to repair. Ive had my repairman out 5 times to repair things. Thinking each time its cheaper to fix it than buy another which I surely didnt think I would be repairing it several time! At this point Im just sick to death that a washer that is for a home of myself and my daughter has broken down so much. I cant imagine what a family would go through. Even after all the repairs it still isnt right but Im done sinking money into this sinking ship of a washer! Its loud constantly stops due to un level so I have to move the clothes around usually having to repeat this several times before I can get the load to finish!!! Then they come out wrinkled more than they went in and I have to iron clothes. A person should NOT need to iron! May as well wash them in the river on a rock. It would be easier!!! SO DISAPPOINTED!!!

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

We bought a new Whirlpool refrigerator about three years ago. Because of space, we had to purchase one with a top freezer and also with no ice maker. First of all we didnt realize it was much deeper than our old Kenmore so it stuck out further into the kitchen space. That was not that big of an issue. At first everything ran great including the top freezer compartment, or so we thought. Then we noticed that when we had ice cream in the freezer and put water in ice cube trays to freeze, the ice cream would get very very soft. This continued to the point that now anytime I put water in there to freeze ice cubes I have to turn up the temperature to keep the ice cream frozen. Once the ice cubes are froze, there is no problem, but they take at least six hours to freeze. Then one day when a young child slammed the refrigerator door closed, the freezer door popped open about an eighth of an inch and then closed again. So, I tried it. Anytime you close the refrigerator door a little too hard the freezer door pops open. I then tried the dollar bill test to check the strength of the seal. The bill pulled right out of the door with very little effort. So, is the problem bad seals, bad design, or bad quality control, or what. How can I be assured that the frozen foods in the freezer are being frozen as solid as they should be. I know they dont freeze solid enough in the freezer door. I will eventually dump this refrigerator and go get another Frigidaire. If we have to get one with a bottom freezer, we will just have to rearrange our kitchen to accommodate it. But, having to turn the temp up and down every day is ridiculous. I have had issues with food close to the walls in all refrigerators slightly freeze, but never had an issue with keeping things cold enough. I will never buy another Whirlpool refrigerator, stove, or anything else for that matter. I have always had good luck with Frigidaire, so I will stick with what I know works.

This machine has had so many repairs that whirlpool should of replaced it. Now the machine is making a clicking sound when you turn it on to do a load of wash. It clicks for a few minutes then tries to sense whats in the machine then starts clicking again. Clothes come out of machine half wet. Queen sheets are dry in the middle. Water NEVER even touch the middle of the machine drum. All around nightmare with this machine. Would not buy another whirlpool because the customer service that I was given was terrible.

Reading the many reviews of malfunctioning washers and other appliances, I wonder why organizations like Consumer Affairs and Consumer Reports do NOT help the many cheated customers form a class action lawsuit or boycott or some other means to effectively organize and force manufacturers to return the full cost of purchase, taxes, shipping, moving and repairs for 5 years for every product. The manufacturer have NO consequences for selling shoddy, malfunctioning but terribly expensive products. We are all being taken for fools by the corporations.I was stupidly brand loyal and bought a Whirlpool Duet front-load washer and dryer because we had to leave our perfectly good 28-yr-old Whirlpool washer when we sold our house. The first set of instruction is to pull the electric cord from a small hole in the back of the washer. No amount of pulling would budge the cord. Finally yanked with all my strength, heard a snapping sound and 12 of cord came out. Then no more pulling, yanking or tugging would produce another inch of cord. So I took off the top of the machine and found the cord tightly wedged in the fork of a plastic thing that looked like part of a stabilizer for the drum.A similar plastic thing on the other side was broken at the fork, the snapping sound I heard. Freed the cord with lots of effort, but it was still firmly stuck way down inside. Removed the back of the machine, found the cord stuck inside a circular thing with one tiny opening. Took lots of time and effort to free the cord from that, but it was still stuck. Finally managed to reach the plug, which was firmly anchored to the bottom of the frame with an orange lanyard. Cut the lanyard with a knife to finally free the cord. This had to be an act of sabotage by an assembly worker, as no way could the cord accidentally jam itself into 3 different places too small for the cord to slip in, and it certainly didnt tie itself to the bottom of the frame with a lanyard.The hour it took to free the cord was just the start of troubles with this machine. It did start and kind of tumbled clothes in an odd fashion, but when it went into spin cycle, it literally jumped all around the room, almost jumping out the door. The whole house shook and I feared the floor would collapse. That machine must weigh well over 100 lbs. even without water and clothes. Next load I tried delicate cycle which had a slow spin cycle.Same result, even worse. I had to wedge my body in the 10 space between washer and dryer and press down with all my 170 lbs. to keep the machine from doing serious damage to the dryer, walls and floor. I contacted seller, Lowes, and they said call Whirlpool. So I did, but no response. Before buying that machine, I read many horrible reviews of Whirlpool Duet machines, but I have only owned 2 washers since 1967, both Whirlpools, so I had strong but stupid brand loyalty.

I had a kitchen fire in 1999. All appliances were replaced with Stainless Steel Whirlpool. My old fridge was an 18 y.o. Whirlpool and still works fine in the garage. My old above range microwave was 12 y.o. and worked fine, I should have kept it. I had to replace my new Whirlpool Microwave after 4 years and 4 repairs. (Main Power Diode kept failing). Now my Whirlpool Gold fridge is not defrosting, even the freezer light switch is frozen. This French door freezer also seems to have less capacity than my old upright freezer. The retailer seemed sympathetic and pathetic. They would not budge on repairs. I told the contractor that did the rehab on my house what happened, he said he would stay away from Whirlpool and that retailer.

We bought a Whirlpool Range gas stainless steel five burners on top. We haven’t had it a year and the paint is chipping off of it. It’s starting to rust now. I know stainless steel ovens. You have to clean them specifically with certain chemicals which I do so there should be no reason why it’s rusting and the paint coming off of it. Hasn’t even been a year yet since we bought it.

I have the model FG1H5040T3NOV water heater and had found this message board. I called the number posted by Chris with American Water Heater and provided them with my serial number. They shipped me the replacement assembly next day and after about an hour, I had it installed and working again. Im not too happy with the fact that it failed, but it does appear they have their act together in getting the replacement parts distributed.Based on the discussion with the person on the phone, my only real gripe is this: the cause of the component failure was potentially caused by a dirty-flame trap that supposedly needs to be cleaned regularly. Since the trap is underneath the water heater and is in no way really accessible, relying on people to see the fine print in the manual (which hardly anyone reads) isnt sufficient. At an absolute minimum, a very clear and apparent sticker should be included on all water heaters indicating this needs to be cleaned and a clear description of how to clean it properly to prevent this sort of unnecessary headache in the future.

I purchased a Whirlpool Washer/Dryer set in June 2014. Yesterday, Sept 9, the motor stopped working. The machine was on but nothing happened. Called the repairman who said the motor burned out and had to be replaced at a cost of $180 plus $75 for his labor. I paid around $400 for it a little over a year ago and now I have to pay $255 to get it repaired which is ridiculous for a ONE YEAR OLD machine. I will never buy Whirlpool again. I should have read the reviews first before buying but I always thought this was a good brand. Lesson learned, never buy Whirlpool.

This WP stove is so easy to use a child could do it. We use the built in timer all the time, not only when using the oven but timing items on the top of stove as well. Speaking of the oven, the self clean not only cleans but it leaves the oven sparkling. We love it.

I purchased this washer (Whirlpool Cabrio Model #WTW8000DW) 10-25-17 from Best Buy & now it has no power to the panel at all. The power to the outlet is fine which I can plug a hair dryer in & the hair dryer works. Tried all the reset buttons & options with nothing on the panel working as well as unplugging. Still nothing. It is barely 4 months old & I am very dissatisfied for the amount of money I paid for a high efficiency top loading washer.

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

Ive had this dishwasher for 1 yr and 4 months. Its been used properly and kept clean. The motor quit. A dishwasher that only lasted a little over a year. Cheap piece of junk. I spent over $800.00 with installation. I will never buy a Whirlpool dishwasher again. Try and call Whirlpool and someone in India will politely read from a manual and waste your time. Useless!!!

This company has terrible, deceitful, and pass the buck practices. I purchased a Bravos MCT top loading Maytag washer from Home Depot. Maytag is now owned by or has been acquired by Whirlpool. First I was a little disappointed to learn that because I had previously purchased two Whirlpool made washers and got no more than six years of service out of both them. But from the day this washer was delivered it did not perform as it should. I called and texted with the hours provided for rejection of the washer and was told by a customer service representative that it would be replaced. The main problem was the spin cycle. With only a few clothes in it, it jumped all around and moved so much that it was sitting in the middle of the washroom. Thinking that occurrence was a one time thing, I stopped it; cancelled the cycle; and reset it. It finished the load. This occurrence was reported and simply fell on deaf ears. I was lied to and told a replacement would be made; it was not. I have sent numerous emails and have made several calls for more than a year now and I still have the same defective washer in my home. Each time I emailed, I received a different message from the customer service person. This company wants me to pay for a service call or buy an additional warranty for a defective machine they produced and refuse to honor their replacement policy— which they now say is the responsibility of Home Depot. Luckily I have kept every email and document I was provided. I am being forced to file a claim against this company to get their attention and to remedy this situation. The expense of the claim will be greater the cost of purchasing another machine, but it is this kind of behavior, on the part of A corporate giant, that is makes life tough for everyday people like me. Stay away from the Whirlpool name for washers—even a prior good name brand like Maytag.

Contacted Whirlpool - unit (Cabrio washer 7600xt) is out of 12-mo warranty. Spoke with manager, Tracy **. She said they would not help - out of warranty. Called local parts/service center - ea. hinge is $42 plus shipping and labor to install. Obviously this is a defective design. The lid is too heavy. I was having a difficult time deciding to spend 150-200 dollars every 2-3 years for hinges on a $700 washer and then I read all the other complaints about Whirlpool washers. I will sell it for scrap and buy a better brand.

Purchased double range ovens. Enamel is flaking off within 2 years. Whirlpool denies defect. They wont replace it. Any other folks with similar problems? What can I do to have it replaced? I remember the old ovens and how the enamel just stayed and stayed and stayed. Never a rust or flaking issue in those old time models. Any expertise on how the enameling process may be compromised in the newer manufacturing process (cutting corners or costs). Any options for a class action here if a commonly experienced occurrence? If similar experience drops comments/review below as a one liner - just state enamel defect. That way can figure out the number of folks with issues. Id like to take action if given the opportunity, and more so if this is a common occurrence. Lawyers are costly for one-off complaints, but there is power in numbers (think United Airlines).

I purchased a Whirlpool refrigerator with an ice maker exactly 2 years ago. It stopped making ice. I called a Whirlpool repairman and he said there was a leak in the freon tube. I should get a new one. I did, am trying a basic GE with icemaker.

I used their website to schedule an appointment for an estimate for a repair on my oven. I was never told they were sending an independent contractor to do the repair nor that there would be a charge for the estimate. I contacted Whirlpool and was told there is nothing on their website and I should have asked the service technician before he was at my door if there would be a charge. Therefore, it was my fault and I indeed had to pay the charge when I declined to have my oven repaired. I paid an independent contractor hired by Whirlpool for $129 to give me an estimate on the repair to my oven despite never being told of such a charge prior to the appointment.

I have a similar problem with my stainless steel Whirlpool bottom freezer refrigerator, model EB9FVHRWS01, purchased in May 2011 from Sears Canada. Exactly a year later, right after the warranty expired, I started getting ice forming on the floor under the bottom freezer. I have been cleaning it out on a weekly basis for the past just over a year. If I dont clean it out, then water seeps out onto the floor. I purchased an extended warranty for my new stove but didnt for my fridge.A co-worker had the exact same problem, with ice forming on the bottom freezer exactly a year later. He purchased the extended warranty and had the Sears repairman come in and replace a $50 part (box in back) ($150 labour). The repairman said this is a manufacturers defect in these fridges and theyve had many such cases. Apparently, the box in the back freezes up and water cant drain to where its supposed to go to be evaporated so it drips to the bottom of the freezer. I contacted Whirlpool and inquired, and they said there was no defect or noted problems with my model. Now Im contemplating whether or not I should spend the $200 and get the defective part replaced. Sigh.

Purchased 11-02-2016. This Whirlpool/Kenmore dishwasher is falling apart. Top rack wheels are totally broken, ordered parts 4 times, gave up. Now they are held together by gorilla glue. I have gone through 3 gray plastic end caps for the top rack runners. Now one is contained by a plastic slip tie. Last week it started leaking. Sears was totally useless. Whirlpool keeps sending me back to them. Now, I have to go buy another new dishwasher. It will not be a Whirlpool. Next time getting the extended warranty.

I purchased a Whirlpool Cabrio set about 5 1/2 years ago. Almost right away the washer made a horrible banging noise when In use... I had purchased a extended warranty so I had the service man out. He replaced something but the washer never acted right. I just about 2 months ago replaced it with a normal washer costing over half of what the Cabrio cost me... and now just a few days ago the dryer followed suit and died. The repair (out of warranty) was going to cost $150.00 and that was just for the part, I had service people out twice for the dryer since it came home with me also. This set was the biggest waste of money I have sadly wasted in my lifetime, is it just that they make things badly these days or the more crap that a machine has on it the crappier it is???

I purchased this Cabrio washing machine in December of 2016. I have had a huge amount of trouble with the soap not washing out along with it tangling my clothes. This has to be the worst machine I have ever purchased.

I paid big bucks for a five burner, convection stove. I had a pot of boiling water on and the steam melted the plastic cover over the controls. Whirlpool said I had to buy the whole electronic panel. Close to $175.00!

I purchase a WP Fridge only unit model WRF578 18D MOO in July 2016. I woke up 3 months later and my fridge was filled with rotten food, the internal temp was 16 C 60.8 F. I phoned Sears and they had me phone WP. They tried to repairman but he phoned and told me that he could not service my fridge as he was a 3 1/2 hr and one Ferry ride away from me - He was in Whistler and I live on the Sunshine Coast. I phoned WP again and they sent someone who actually lives here. He found and repaired a small freon leak. Four months later it happened again, the fridge was also making loud noises when the compressor started and stopped. I phoned WP again. They sent the same repairman, he ordered and installed a new compressor and topped up the freon. Sadly less than 3 months later it happened again. This time I was very firm with WP that I was unhappy, they extended my warranty for a further 6 months. The same repairman again came and topped up the freon. That brings us to this week. On Wednesday June 14 I woke up again for the fourth time to a fridge full of rotting food. The fridge was actually warmer than my Greenhouse that day! I phoned WP. They were unwilling to help so I asked for a supervisor. She offered to pay 1/2 of the service call as my warranty had expired Jan 26/17. I said that was unacceptable and asked to speak to her Supervisor. She stated that she was as high as I could speak to, so I asked for an e-mail address for her supervisor. She instead tried to tell that I had no warranty and that they had already fixed my fridge 3 times and given me an extra 6 months on my warranty and offered for me to BUY an extended warranty! I replied that if my fridge were fixed I would not need a service call and that in fact my fridge had never really been fixed. She transferred me to another person. He offered to pay for the service call. I accepted. He asked if I were happy, I said that I would wait and see after the service call on Monday. I Asked if it were the same Man, he said that violated his Privacy. I said I will see him Monday! Will he be wearing a disguise?! Kohuch (the Service guy is coming over this afternoon -Friday) my Husband left work early to be here.

Sounding like a broken record, this washer is such a disappointment! I had high hopes for this top loader and thought I did enough research. Bought a Cabrio in Oct 2016 and have never liked it. They will have you believe it’s your fault... the wrinkly clothes, the clothes not clean enough, the white marks over all your clothes... you can’t change your detergent or softener enough and change the amount enough... it will still be there. So disappointed??? Want my front loader back!

Refrigerator model WRF560SMYH purchased 22 months ago will not defrost automatically. When ice builds up on the back of the bottom mounted freezer, it creates a terrible noise. Only quiets when we manually defrost the ice with a hair dryer!! 4 service calls from the warranty company has failed to solve the problem.

My Whirlpool stove works really well, and it is self cleaning. I have had my present oven/stove combo now for 5 years and had not had one single mishap at all. I am so confident that you will like it I am personally recommending it. It bakes beautifully and if there is a spill or overflow in the oven I just press a button & it cleans itself!

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

The buttons that turns on the burners and oven turn on with a very light touch and start leaking gas and sometimes light. Its very dangerous and has done this since We got it new from Lowes. I wonder if there was a recall on this model or if lots of other customers have had the same trouble. Model #WFG524SLAS O Ser. # R20910336 We have had this stove about two years and My wife has kept after Me to report it , but I never realized how dangerous it really was until now. The previous stove We had you had to push in on the buttons and then turn them before they would light. Thank You.

We purchased this model in July of 2019 and have had nothing but problems with it since. The design is really bad - if you set the temperature on the ideal setting, everything on the top shelf freezes solid. If you reduce the setting to the one below ideal, your freezer doesnt get cold enough to keep ice cream hard. The ice cubes are a little more than half the size of our last Whirlpool refrigerator and the unit is noisy. Weve had Whirlpool out to work on it 4 or 5 times in the first 6 months and twice weve had to throw away food due to the unit not cycling on and off properly. One of the technicians told us he spends a lot of time working on this particular model - evidently, it has a lot of issues. We are now using our old garage refrigerator while we try to get Lowes to give us a refund on this piece of junk.

We purchased this Kitchen Aid stove December 7, 2016. I dont use the oven much, but have found that when it gets a little dirty and I use the Aqua Life function, it does not clean. Have tried by setting a pan of water in the bottom and raising the temperature to 300 degrees, but nothing cleans. We went with this feature to be more environmentally responsible. Leons, where we purchased the stove, claims that they have heard nothing of this issue and have not been informed of this by their head office.

Very unreliable oven. Oven temperature never seems to get to the proper setting. Do not buy any Whirlpool appliance. They do not stand behind their product. A stove should be relatively simple but Whirlpool managed to produce a product that is complicated & unreliable.

Hi Folks, so today I had the pleasure to speak to Whirlpool regarding a repair bill on our washing machine which now has a bearing failure and estimate to repair was 1279.00. Its 6.5 Yrs old, just out of extended warranty and cost me with the pedestal a total of 1250.00 when new. I explained that in the 6.5 since I have lived at this house where we spend all new Whirlpool Gold Appliances, half have now failed. Range Microwave, Dishwasher and now the 1250.00 front loader is dying a slow and agonizing death with a bearing failure. Just so everyone understands, the estimate is from an official Whirlpool repair service that was booked through the Whirlpool website. Other repair folks just would not bother to look at it when I told them I believe the bearing was going bad.The repair man that arrived was professional and on time. However, I had a hard time understanding how a 6.5 Yr old washing machine would be considered beyond economical repair by costing 1279.00 to repair. Labor was 250.00 which I thought was fair. Time, etc. But parts made up the difference in cost. So later in the day, I spoke to Whirlpool and they offered the equal new washer for what would seem an excellent price. About half off. Wow, I thought that sounded good. So I asked if my existing pedestal would work with the new washer and it did not and I would have to pay for one. Regardless if my old one was fine or not.So, they offered a discounted rate from new at another half off. Total approx 800.00. So, I asked the Whirlpool rep to hold on and I need to check with my wife if she wants the replacement. She uses it as much as I do and wanted her thoughts. She checked the model on the washer and pedestal and with the local Home improvement store, they have it on sale for both units (washer and pedestal) and its about 50.00 less?Consequently, I called Whirlpool back and explained that it does not move the needle to regain my trust as compensation on a 6 yr bearing failure, failed dishwasher and range microwave they offer what a distributor of their product can offer for less as a package? Really? I mean, the Home improvement store is not in the business to lose money. Now, I am having a hard time understanding my own failure to have trust in a brand I used to have with my previous house.My mom had an old Whirlpool washing machine that lasted 25 years before she and my dad gave it away. You know, the old white top loader they used to make back in the 70s. Sheet metal, made a racket and never broke? Oh yeah got the clothes clean too! I dont know what to make of it anymore. So, I will just wait till it dies and take my hard earned money and spend it on another brand in my next house which we are going to move to soon. Maybe I can feel nostalgic and find my moms old washer. Its probably washing someones rags right now and getting them clean. It must be 35 yrs old by now.I dont expect to get anything for free. Its out of warranty, so I need to deal with the consequences, but there are steps the other party can take to help remedy the situation. I think they tried and it was genuine but in my thoughts its just not enough when your local box store is offering the same. When you develop a brand to extend a message of trust in quality and value, you need to have quality and value all the time. I suggested they help with the costs on the parts. I would certainly pay for the labor. Parts cost little to the manufacturer. Unable to help that way. I thought it was cheaper for them too. Guess not. Its come to be a throw away washing machine at 6.5 yrs and I am Infinitely disappointed. I just want my washing machine to work as well as my mothers old one and have the possibility to fix once in a while when needed.

Inconsistent freezer and frig temperatures, with vegetables and fruits freezing in the fridge, even when temperature is properly set. Freezer control knob and vents too easily blocked. Unit is very noisy.

How can Whirlpool deliver a new refrigerator/freezer and refuse to include a shelf in the freezer even though there are rails built in on the sidewalls to support a shelf??? Of course they will sell me one. The cheapness of todays manufacturers is appalling especially in light of the prices they charge.

I’ve had the dishwasher for at least 3 yrs. if not longer. I have a long history with Whirlpool products and so far I haven’t had any problems with my past purchases. They normally wear out from age because if you take care of it normally they last for years.

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

We have a wtw5500xw2 washing machine we bought 03/2012. We can no longer use it. The machine would not spin or agitate so the clothes do not get clean or get the water out and after the cycle is done we have to wring them out after to be able to take them to the laundromat. So two repair companies and 3 months later we find out that it is the wiring harness that is the culprit. After a new motor and a shift actuator, we contacted Whirlpool only to be advised that the washing machine is out of warranty and that we are out of luck. If the company has a known issue about these wiring harness they should be looking into it and changing suppliers or offering to replace the wiring harness at a discount to its customers. I will not be buying a Whirlpool appliance ever again. I would recommend going with a Kenmore. I have had a Kenmore dryer that I got 19 yrs ago that we got used and only had to replace the heating element.

I purchased a whirlpool gold series microwave model #WMH76718AS one and a half years ago, paid $500.00 for it. It stopped heating. Everything else works on it so it looks like I paid $500.00 for a digital clock and a fancy bread box! I went online and read complaint after complaint that the same thing happened to other people. It appears that the magnetron is faulty. I called Whirlpool and asked their service rep how she would feel if she bought a microwave and after 1 1/2 years it wasnt working. She told me that it was man made and that I should EXPECT things to go wrong. She did offer to pay for parts... which did surprise me. But I have to pay for a $45.00 service call and all labor that it costs to fix it. I called the number she gave me and got a answering machine.... still waiting for them to call me back. I most likely will just throw this Whirlpool piece of junk in the garbage where it belongs. I dont want to spend hundreds of dollars to repair a lemon. I feel that Whirlpool knows there is a problem with their product... that is why they offer to pay for parts. But why should their mistake cost their customers money on top of all the inconvenience. Whirlpool does not back their products or care about their customers after they get your money. I will Never buy a whirlpool product again and that includes anything from their sister companies Maytag, Kitchenaid, Jenn-air, Amana and there are many more. So before you buy anything make sure you check to see who you are really buying it from!

The dryer is okay but the washer is no good. Doesnt save water because clothes have to be washed twice. Sometimes thrice to get them clean. Cycles are longer therefore more energy used. More water, more time, more energy. Terrible design. Useless piece of junk.

Washing Machine Model WTW4616FW - I purchased this machine at Home Depot after I had to return my Samsung Costco machine that was recalled due to the glass top flying off. I was attracted to it by its simplicity in design and price. I have had it almost a full year and love it. I like that it has the deep water wash for over-sized items and a full-sized agitator. I was shocked that it was actually Made in America. I highly recommend it and I hope they keep making this reliable machine that gets the clothes clean. Awesome machine without the bells and whistles that I dont expect to breakdown. Way to go Whirlpool!

We purchased our oven in February 2012. In April 2013, we began smelling gas. I called the gas company. They came within thirty minutes and determined the gas was coming from within the oven by using a gas detecting probe. The gas was turned off by the gas company. I contacted an appliance company who came out for $95.00 and used some type of spray looking device to check for leakage or bubbles to tell us we had no problem. Our warranty was only good for the one year. The appliance company ripped us off and Whirlpool was a bad deal. After reading of all the complaints of Whirlpool, I will not buy Whirlpool ever again. I will admit that the stove worked fine for the year. I was hoping for a longer life of this stove. Now, Im afraid to use it.

They stink. Major issues with most all of these Whirlpool water heaters. I have had issues with 3 different units. I own properties and these are pure junk. Cant find parts and have to pay for shipping on warranty parts! 2 years old units junked, Ridiculous... never buy Whirlpool!

Bought Sep. 2012. April 2016 stopped cooling. Four visits over 4 weeks, various parts replaced, coolant refilled. Stopped cooling again soon after first 3 visits. After 4th visit cooled moderately (42 degrees) for 5 weeks. June 24, renewed service contract for 1 year for $112. July 12, stopped cooling! Took 8 days for service person to arrive; 5 days for him to tell Whirlpool that repair needed 5 parts, one of which is no longer made! But they sold me a service contract?? 16 days after initial call, Whirlpool says my case is in adjudication, which will take 7-10 business days. So I wont know what they are offering till Aug. 8th-11th. Four weeks living out of a cooler. The product is rotten, and the service is worse.Just recently discovered that all this time when I thought I was talking to Whirlpool, it was actually sub-contracted to AIG. Yes, the AIG that needed a massive government bail-out. Whirlpool customer service refused to talk to me; referred me back to AIG. The only other all-refrigerator (no freezer - I have a 20-year-old Sears freezer in the kitchen that works just fine) I can find is an inch too tall for the space. But I plan to spend for my handyman to raise the cupboard floor above, rather than buy another Whirlpool! Most of May, four weeks in July/Aug without a fridge. Hours on hold. The first service firm they used was incompetent, couldnt find the cause. I wonder how much of my $1,353 purchase cost, and my $112 service contract theyll refund?

This is a defect due to the removal of the dispenser heater being removed. The insulation is inadequate behind the ice/water dispenser (@ 3 feet from the bottom of the door.) Replaced the line, thawed it out multiple times, added extra line under the fridge in the coils to try and warm up the water in the line between the 90 degree elbow connector and the dispenser... no luck. Since all the manufacturers models are being assembled in Mexico, using the same designs, other models are have the same issue. GE is backing theirs with a replacement freezer door. Well see if Whirlpool backs theirs. This whirlpool Gold is @ 3 years old and the issue started around a year ago.

I called and emailed Whirlpool because the water dispenser drips all over the front of the fridge and floor. They had the nerve to tell me to use a cup for the problem and there was nothing they could do. They were no help with this problem.

We purchased the Whirlpool Gold Series smooth top stove from Lowes in December of 2013. The stove is not even 2 years old and it doesnt work. Last September, I noticed a few times that while baking food in the oven, it was burnt after only 10 minutes, due to a runaway temperature. After that, the oven wouldnt heat up properly, it would take too long to bake anything because the temperature wouldnt reach the reading on the display. Then it just stopped baking or broiling all together with the error Feature unavailable. Weve had a serviceman out at least 3 times. Of course, the warrantys run out and its cost us close to $500 to keep fixing it, and two motherboards and a bottom element later, its still not fixed. They wanted to order 2 more parts at our expense, but we cant continue trying to fix this lemon. I will be shopping for another oven, and will never recommend Whirlpool to anyone.

We bought this washer from Sears with big hope. Within the first year, we had 14 service call covered by the warranty but required 2 to 3 weeks in doing without. Whirlpool replaced the washer at no charge but continued to have various issues over the years. The new one is the control module that Whirlpool knew was faulty but did not let their customers know. The control module went over the weekend but I repaired it myself and do not have any more issues. I literally went in and tightened all of the hardware, removed and install the pulleys, motors pumps and replaced a lot of keep components with better quality. Guess that year the CEO made only 20 million rather than 19 million. Being an American company I was disappointed by the consumer relations people but everything is a throw away nowadays. Will not buy a Maytag or Whirlpool product again. Where has American product pride gone?

I loved the Whirlpool Refrigerator! Nice size and always worked well. Had to replace it after condenser quit working. This current fridge is unhandy in many ways. No light in the freezer and size is too small. Had to fit into existing space, but does not have as much storage space as the KitchenAid that fit in the same space.

I have had my machines for years, and always buy Whirlpool. So far so good, had to replace my washer and dryer approx 11 years ago and still ok no problems yet. Wish I had the money to buy one of those bigger ones someday.

My Gold Series Whirlpool Electric Range is 3 years old. The main board for driving the burners, oven, etc burned up which caused my oven to go from the 200 degree setting to 450 in about 3 minutes burning everything that was in the oven. They want $400.00 + installation to replace it and that is if one can be found to actually install. The stove was purchased for $850.00 because of the Brand and now they want half that value to replace a board that will likely fry again in a year or two. I find there is no value for money and will not ever buy a Whirlpool brand again.

Cleans dishes very well, a bit noisy maybe that just the model I have. Exterior is very nice, interior there is plenty of space for the dishes and pans. There are no streaks on the glasses. No soap scum left on the dishes at all, very good unit.

We have a built in double oven and we had some early problems with the thermostat. And from time to time the clock resets to 12:00 oclock when there is no other power outage indications. Its also been a challenge understanding the instructions sometimes.

In 2013 my oven died. Upon doing some research my husband and I went to our local appliance stores in search of a new one for a good deal. We chose a Whirlpool electric range with convection oven. We have had it 2 1/2 yrs and have used it often... until today we had been very happy with it. While baking some French fries we heard a loud pop, almost like a shot, running to the kitchen to find the inside tempered glass shattered! Wow! Shocked to say the least we couldnt believe it. Called our Lowes store, to no avail our warranty had expired. They gave us Whirlpools number with no success. I am extremely disappointed and will probably never buy Whirlpool again!

Appliance repairman is coming tomorrow. Washer is less than 2 years old and will stop mid-cycle more than once (I re-start it)... At first when I thought the cycle was done I would get ready to move the clothes to the dryer and realize they were all soapy and sometimes they were just massively soaked so something is not working right. Sensor?? Hopefully not the computer panel as that will be too expensive to repair.

I purchased my Whirlpool washer on June 28, 2011. Within 4 months, I had to call for a repair. It is now going to be a year and I am on my seventh repair call. The repairs have been everything from loose pulleys, new belts, and new valves. When I called to complain, they said there is nothing they could do and I should take out the extended warranty. I have had washing machines last up to 15 years. Needless to say, they werent Whirlpools. I really would like to have it replaced. I dont think its fair to me that I should have to wait for a repairman to come out and tell me he doesnt have the part and has to come back. I did take out the extended warranty, which cost approximately $150.00 and that should not have to be.

We purchased a Whirlpool Cabrio washer model # WTW6400SW3 in 2009. There are only 2 of us so the machine is not overworked. You would think it is 20 years old. When it spins, the noise is unbelievable. The bleach dispenser always has liquid in it and the fabric softener gums up like crazy. We have stumbled upon other complaints and now we are really worried. I should have followed my past experience and bought a GE! This is all we need. In todays economy who has cash laying around to throw away like this?

We have the four-door model, french fridge part, drawer, and bottom freezer. Overall has been a good appliance. Icemaker burned out in third year. Icemaker replacement is very noisy, popping and groaning during drop-out and refill. Noise level otherwise is average.

Not real expensive but cleans almost perfect. Were happy. MUCH better than the beautiful and pricy Samsung. We returned it for this. Paid less than Samsung but always purchase extra warranty. So far so good. Pretty quiet. Nothing to complain about except be very careful how its loaded to get the best cleaning. Heat dries dishes really good. Looks great but not better than others.

My appliance is less than two years old, and it wont stop heating. I have to manually turn it up and down to heat water, which seems strange, since most or all of the complaints are because it wont stay lit. Mine stays lit (knock on wood). It wont shut off. A new thermostat costs $60.00 after two years? Please.

This microwave came with the apartment. Its the 2nd one we have had. The first one failed in our 3rd year here. We dont use all the functions, but what we have used, it works fine. Would I purchase this brand, no. I would choose GE, or Panasonic.

I purchased a Whirlpool Cabrio on October 27th, 2010. The Cabrio is always giving me the UL code, which indicates the load isnt in balance. Ive been doing laundry for 27 years. I know how to load dirty clothes into a washing machine evenly. Sometimes it will take me all day to do one load of laundry! Seven months after my purchase, my Whirlpool Cabrio washing machine started giving me the F51 error code. I called the phone number on my Lowes receipt for warranty work. Two weeks later, I finally had my washing machine running again. I was happy and thought Id only have to deal with the UL code. Boy was I wrong?!Now Im two weeks away from my warranty expiring. Im getting the F51 error code again! This washing machine is an $800 piece of junk! Hopefully, I can get the Cabrio repaired before my warranty expires in two weeks. I do a lot of laundry. We are a family of six. So, I know Im hard on washing machines but come on. Shouldnt an $800 washing machine last at least two years? Im not even a full year into owning this junky washer and Ive had two breakdowns! In my opinion, this washing machine needs to be recalled and people need a reliable replacement or refund.

First of all, I did not want to give a rating of one. Your system forced me to. They do not even rate one star.In summary of the below, I did not fail to communicate from the moment we received our appliance and Whirlpool in short intentionally wasted time to let the warranty run out to avoid replacing a lemon of a dryer. Please read details below.We bought our new dryer (model WED9400SZ) on 10/24/10 with a one year service & parts warranty from Appliance Smart in Apple Valley, MN. In March 2010, we called in to Whirlpool customer service to relay our issues & to arrange for service & repair after a few months of noticing holes in our clothing (at first thinking it was the new Whirlpool washer making the holes).Although we purchased the unit in late October, we didnt use it for the first time until late November (1 month later) as we just bought our home & took four weeks to paint the entire home before moving in. Then on December 29, 2010, we left for a three week vacation to Mexico & again hadnt used the dryer during that time. Returning home, we started to use the new washer & dryer (in late January 2011) but had thought it was perhaps the washer making the holes & it took us until to March for Whirlpools preferred service repair providers to determine that the holes were coming from the dryer. I do not have a reference number to refer to for the complaints to Whirlpool as I was not provided one.They only always asked for our delivery address which is: xxxxx ****, Lakeville, MN.The issue of the dryer making noticeable holes in our clothing and in one instance chopped a sock completely in half (both pieces found within the dryer drum not stuck behind the drum or sucked into another area of the dryer) has been consistently ongoing and to date has not been fixed. On several occasions, I expressed my concern to Whirlpool customer service as well as to managers (because the case had been elevated to where they had managers and review boards looking at the problem more closely) as we were getting closer and closer to the warranty expiration and the dryer had not been fixed. Routinely, I was told that regardless of the warranty expiring, if its the same issue that persists and had not been resolved while within the warranty date, they would continue to honor the warranty by continuing to try to fix the problem or replace the unit at no additional cost to me if necessary.Whirlpool had escalated this repair issue (multiple times) to their review board and determined that the dryer was indeed repairable and continued to send out Twin City Appliance to repair it. Finally, just 23 days out of warranty, Whirlpool deemed the dryer should be replaced, but at the cost of a new machine $370 to us (which they somehow prorated to get that figure). We paid $399.98 plus tax for our supposedly new dryer so clearly this is an unexcitable resolution. In speaking to Rhonda this morning, she further prorated the new dryer replacement cost to $260 to include installation and another one year warranty and gave us until December 21, 2011 to take advantage of.This product never worked from day one (a lemon) and has caused roughly $400 in damage to our clothing (all photographed for proof). This has further resulted in me missing work to let in repairmen & and taking great amount of time to lay out out wet clothing around our house to air dry (again, all photographed. ) This has caused extreme stress for me in spending hours and hours on the phone with Whirlpool and repair people (cell phone records of dates & conversation length as proof). I have also developed great anxiety attacks in using our dryer, scared at the outcome of which of our clothing will be ruined. After having two different service repair companies (A&E Factory Service and Twin City Appliance, both in MN) at Whirlpools insistence come to our home on more than 10 occasions within the year warranty to determine the cause & try and repair the faulty machine, this proposed resolution by Whirlpool is absolutely unacceptable. It is important to me as a consumer the this issue is formally filed with a reputable institution (BBB). I feel we have no choice at this point but to contact our lawyer and take this issue up in the courts. Resolution proposed:I am seeking a replacement of our dryer at the equivalent or greater value than the model we purchased and a letter of apology from the CEO or equivalent position in their corporation as I want to know that this poor level of customer service provided by their company was indeed brought to their attention. I am also asking for $400 to replace our damaged clothing. When this goes to court if not resolved via the BBB, I will ask for pain and suffering damages as well.This has been an unbearable chapter for our family this year, one that has weighed heavy on us and caused great stress, anxiety and loss of money and time. I am in shock that a worldwide corporation with the longevity and commercial history and quality service that Whirlpool was known for cannot admit that this lemon we purchased is a (most likely) rare instance and step up to the plate and demonstrate integrity and show value for their customers by doing the right thing. Time after time their customer service reps promised I had nothing to worry about and that if the machine could not be fixed even if it fell out of warranty, they would take care of the replacement of fixing it at no additional cost to me.