Bought a Whirlpool Cabrio Washer Dryer combination on 4-5-2009, had it delivered on 4-20-2009, was very excited to get this set as it was like my first ever brand new washer dryer. I thought Id spend the money get something good and it would last for years and years. Was I ever wrong. I bought the set and the extended warranty from Lowes and my total with delivery was 2579.00. 20 days after the extended warranty expires (that I never used) the bearings on my Washer go bad. This thing in spin cycle sounds like a jet engine. I called to see if Lowes would still honor my warranty because I never used it and they said no. I called Whirlpool and checked to see if there was a recall and they said no. I checked to see if there is anything they could do at all because this is a huge known issue and of course they said no. (Just look on YouTube for Whirlpool bearing replacement and the amount of views should indicate the amount of troubled users.)Called a repair scheduled through Whirlpools website to come look at it for a 75 dollar assessment and they said it would be about 500-550 to replace the outer tub - largely due to the fact its labor intensive and the bearings are packed in the outer tub from the factory. I was like are you ** kidding me? I paid 1029 for the unit brand new in 2009 and 550 to fix? I said thank you to the repair guy and escorted him nicely out. Upon that I called back Whirlpool to tell them how displeased I am and how I will not be another product of theirs ever and mostly due to the fact they know this is a huge issue and wont do anything about it. I will be going to Lowes to see if the guy who sold me this pile of crap will work me a deal on another unit or set of another brand after I show him my receipt and express my displeasure with that product. If they wont do anything I will go to another store and spend my money elsewhere - I have choices and others do too. So if you are thinking about buying anything in the Cabrio line, dont. Go Samsung or LG - 10 year warranty straight from the manufacturer and costs 200-300 less than I paid for my washer dryer 5 years ago. The bearings are ** and shouldve lasted a lot longer for the amount I used this machine and for what I paid! Shame on you Whirlpool for using crappy parts to make your machines.

I bought my Whirlpool Convection oven in mid August 2019 from Lowes. I have had to call no less than 5 times about my NEW oven which I am extremely remorseful of buying. I am so unhappy with my experience mostly due to my expectation that my new oven would have been able to meet my demanding needs baking and cooking. I would have thought that it would have lasted longer than 4-5 months. The bottom left hinge is faulty which I am told is an undocumented problem for this particular oven. I noticed that it was having a problem when the oven wasn’t quite making a seal. Slowly it got worse until now it makes an initial click then I can open it about 5 to 6 inches and then have to lift it up so that I can open it without making a horrible noise and a dent in the frame.The first time I called was on Saturday Jan 4th. It took me 1 hour to get through to speak to a person. I asked why I couldn’t get a new door to the oven and they told me the hinges have to be installed separately because this model is made to be able to take the door off for cleaning purposes. They set me up for service on Wed Jan 8th between 12 and 4p. I wasn’t as unhappy at this point. I even got a text saying that the appliance company would be coming between 12 and 2. At 12 when I woke up after working nights, I got a message saying that they hadn’t received the part yet and that there would be no point in them coming. I called Whirlpool again and they told me that the part was on backorder and that in fact the part had to be fabricated and it may take up to 10 business days but that they would have the part sent directly to my house. By this stage I am very unhappy.I called back this morning and told the person that I would rather have a new oven or my money back and that my less expensive and less decorative oven that came with my house lasted me 20 yrs. I get a lot of “I’m sorry” and “I apologize” but that doesn’t fix my problem. I also told them that now the frame of the oven is being dented so I am going to have a less than perfect appliance which is no fault of my own. The only info the person could give me is the tracking number of the part they were able to locate which would be coming Fedex.I tracked it and it was due to come no later than Tuesday night. So I called the original service company in my area who told me to call to set up the service time when the part came in. I figured I would get a jump on it and call. They told me that they were all booked up this week and I would have to wait until next week. Do you think that this is how your customers should be treated? I feel as though I am being punished by choosing to buy an appliance from Whirlpool. I then tried calling back to set up an appt with a new company but the wait time was too long. I had just worked nights and needed to get some sleep. I called back this afternoon and again had to explain the whole situation AGAIN. I was able to set up an appt with a different company for Monday between 12 and 4 which happens to be on Martin Luther King day…so I am hoping it is not a mistake.Do you think this is fair treatment for a customer who just bought a brand new oven less than 5 months ago? Would you like this type of service? Would this give you any confidence to buy products from Whirlpool? I don’t believe that I would be able to recommend Whirlpool in good faith. The people who I have talked to have never been rude or disrespectful however, I feel as though my unhappiness is just par for the course. I feel as though it is just my tough luck and “oh well so sorry” instead of the attitude that you want to make everything right as quickly as possible. I ask myself if the problem was the store I chose to buy from? If I should have gone to Sears and bought one of their products or where I went wrong.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

Two months ago, I bought a Whirlpool duet washer and the computer went out, two days after the warranty was up. It went bad that I disconnected the detergent mechanism, which made it work, for now.

My Duet Sport washer drum is damaged due to the poor quality of the bearings. I replaced the Whirlpool Duet Front Loader Washer Bearing & Seal Kit W10253866, W10253856 but because the bearings were damaged the drum is also damaged. When I opened the rear panel of the washer the bearings had literally come apart and bearings fell out. All of the floor and the oil/grease was everywhere. I replaced the bearings but it didnt matter because the drum is warped. Priced the drum and it is nearly $400.00 to replace the assembly. The cost of the drum assembly is about half the cost of a new washer. I will never buy another Whirlpool product again. Just a shame that the cost of a replacement drum is so high. What caused the bearings to just explode and damage the drum. What did I do to cause this? Absolutely nothing. I have since discovered that this is has happened to scores of people with this same washer.

Whirlpool Cabrio washer w103386894 - I have had nothing but problems with this piece of crap washing machine. Either the clothes come out soaked at the end of the spin cycle, or it gets stuck in a cycle and repeats. It makes so much noise you can hear it through the whole house. It is less than three years old and now it is leaking water. I had a base model Sears Kenmore that I had for over 12 years and it died from old age. This Whirlpool is pure crap, do not buy.

I purchases a Whirlpool 32 Cubic foot 3 door refrigerator in stainless model WRF992FIFM back on November 29, 2016 from Costco. I noticed that it was not making ice and that the refrigerator was around 50 degrees. This was on October 21, 2017. I called Costco and they contacted Whirlpool who sent out a service person on October 25. I am still without a working refrigerator and it is November 9, 2017 as I am told that a circuit board needs to be located.I have called both Costco and Whirlpool and no one seems to be worried about it. I was told by Whirlpool that if a part is not available by end of day Friday November 10 that I will be considered for a replacement. Considered really? I have never experienced such deplorable customer service on both Costco and Whirlpools part. It appears that this model is a lemon as there are large numbers of complaints on numerous websites. I asked for a refund due to the bad reviews and lack of parts and was denied. I will call on Friday for an update.

We purchased 2 whirlpool commercial coin operated washer machines and both computer boards had to be replaced twice each - model CAE2743bqo and CAE27438qd.

Very unhappy all the way around with Whirlpool. The first refrigerator shipped had to be replaced, I do not remember the original problem, just the ordeal involved. The replacement had to have the computer board replaced twice, the icemaker stopped working after a few months, the freezer door does not seal properly. And now, after less than 3 years, the drain is clogged. After researching, come to find out this is a common problem and has resulted in many water damaged wood floors, including my own. Never Whirlpool again. There are much better brands on the market today with better price points. I highly recommend staying away from Whirlpool.

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

Whirlpool Cabrio - Clothes come out of the washer wrinkled, twisted and soap stained. I use the exact soap products they recommend in the proper amounts. Bought them in September of 2014. Wish I could return them. Too low of a water level that cannot be adjusted. Not fully rinsing the soap out of the clothes. Washing takes twice as long as with my former 25 year old washer. Dryer is new technology and energy efficient yet wont remove wrinkles from permanent press clothes.Uses hardly any water so clothes must be rinsed at least one or two times to get the soap spots off. Clothes always come out extremely wrinkled. Not all items can be put in the dryer so ironing is back in my life again. Some items come out so twisted and wrinkled that ironing wont even help. Dryer isnt much better at all and shirts and pants always have some wrinkles. Have had to bring some items to the dry cleaners to bring them back to a non wrinkled state. Whatever is saved in water and energy is more than made up by ironing and dry cleaning. The company representatives have sent service people out twice and they both said that the machines are performing as they were intended to. I do smaller washes and wash more often to try to get better results. I dont. Even though it is extra large capacity items such as blankets must be washed more than once as the water does not wet the entire blanket.

Before a year was up after purchasing 4 Whirlpool appliances for our kitchen, our refrigerator needed a new compressor. Of course, they covered the cost because it wasnt a year old yet. After much complaining, they gave me a whopping extra 3 months coverage, until Jan. 2014. Now we have water leaking on the floor and ice collecting on the bottom of the freezer drawer. What a piece of junk! I had sent an e-mail to Whirlpool after the compressor situation telling them that I would never buy from them again and would have nothing good to say about them. No one responded. Goes to show that Whirlpool could care less about their customers satisfaction. Never again will I buy anything Whirlpool makes. By the way, our old frig is in our mud room working absolutely fine.

Ive always had good luck with Whirlpool. They last longer & dont have as many repairs. Ive had to have a lot of repairs with Maytag washers. The dryers didnt give any trouble. I recommend Whirlpool.

I bought a Whirlpool refrigerator (model number model ised5lvaxwq00) about 14 months ago. The icemaker would not work when delivered. I had it fixed. Several months later, it quit working. It cost $200.00 to have it repaired. The ice door stopped working. I called Alabama Power to repair the icemaker. He advised that it would cost around $300.00 to repair. We are on a fixed income and cannot afford to have it repaired. On investigation, I found hundreds of complaints about the same issue with the icemaker flap. I would appreciate you trying to eliminate this problem.

Clothes come out of washer are soaking wet. Despite multiple repairs within the warranty period (1 year), the problem was not fixed. Each time a separate part was replaced. I would consider this as a manufacturer defective product. Despite multiple complaints to Whirlpool customer service, they would not replace the unit. Problem continues and now the warranty period is over and I am paying for fixing the same problem. I would not buy a WP washer again.

After getting a suite of Whirlpool appliances from Home Depot, I found that they were a little below standard to previous Whirlpool we’ve owned. I found the top of the Electric stove could be easily scratched and the refrigerator was noisy. The stainless steel seemed not as heavy as our other ones. The Whirlpool insignia on the refrigerator came lose and I needed to glue it back on. I’ve always had good luck with Whirlpool and we’ll see how this goes. Just to be safe we bought an extended warranty on the fridge.

I purchased a Whirlpool Microwave on 9/21/10 from Hamilton-Bryan in Wichita Falls, Texas. I had a small fire in my microwave on 9/19/11, due to a faulty mica board. This was replaced by Mr. Bobs in Wichita Falls, TX, under the warranty. Then on 1/9/12, the microwave would not warm anything. I called Mr. Bobs again, and they said the transformer was out. I called Whirlpool, and was told by Yvonne that Whirlpool would replace the part only, with no labor, but Mr. Bobs was closed, and to call back in the morning, so this authorization could be set up with Mr. Bobs. I called back and there was no record of my call with Yvonne. I talked to a supervisor Rachel in Tennessee. She put me on hold for a while and finally said she found Yvonnes note to authorize the part. I explained to each person I talked to that I was dissatisfied with Whirlpool. I believe I have a defective microwave. I would like my money back, or a new microwave. I believe the defective mica board is related to the defective transformer. I am a very dissatisfied customer. I have used Whirlpool most of my adult life. I have used them since the 1970s. I currently have a Whirlpool refrigerator, washer, and dryer. A similar situation like this occurred when I bought a Samsung washer. I was dissatisfied, and Samsung refunded my money, and I bought a Whirlpool washer to replace Samsung. I will not be satisfied with this situation, until the microwave is replaced. Thank you for your concern and attention to this matter.

If you are thinking of buying any Whirlpool products, please think twice. We had a dishwasher, lasted 2 years; range with cook-top, within 2 years computer had to be replaced and again in another 2 years. Needless to say we did not replace either one with a Whirlpool. Over the range Microwave Oven Magnetron blows in 5 years. 3 months over the warranty. In a call to Whirlpool we were told we are sorry you have had all this trouble, we will send a repair man out and he can replace the parts needed. Thanks, but no thanks and went out and purchased a Samsung model, probably cheaper than the repairs would have cost us. There are so many good appliances to choose from. Please stay away from any Whirlpool products, no need for additional aggravation.

Have a warranty with them to get reimbursed for repairs for a year. Have had to use it twice now for the same part. Customer service told me itd take two weeks to get a certified repairman of their choosing to be reimbursed. Two weeks to go without a fridge is their solution and they have no other repairmen working. So I ask to speak to a supervisor and the representative tells me she wont transfer me out because thats the way it is. Paid out of pocket to get it fixed immediately instead of waiting.

We have a large family so when we needed a new refrigerator we found this very large unit (Whirlpool 32 cu). About this unit, its not really all that wide, but it is very deep. Lowes didnt have a model on the floor but we went by photos. Also the salesman showed us a smaller version of this unit and we were impressed with the design. However unlike the unit we saw the shelves arent adjustable. They are preset. Also the ice maker on top is very small and makes ice very slowly. The freezer section ice maker is much larger. The main complaint I have with that is unless you push the tray all the way to the back ice can drop behind the tray and fall down causing the freezer door not to always close properly, leaving you with semi defrosted food. Whoever designed this refrigerator was an idiot. All issues are really related to design flaws. This is a very expensive refrigerator. I expected a great unit and got a piece of crap instead. Stay away from this model at all cost. It would be smarter to buy 2 refrigerators instead if you have the room. This model will give you nothing but a headache and grief.This is our story about our experience. This all took place within 1 year. We bought it at Lowes. They were wonderful when it came to taking care of us when it was within the stores’ warranty. They really tried to help us. Once their warranty ran out they put us in touch with our new repairmen. Lowes did tell us that one other man bought the same unit and he was up to refrigerator # 15. Like I said, this unit is crap. Our first unit was delivered with a huge dent in the door. They took it back (lucky for us we have 2 other refrigerators).Second unit arrived in store also badly dented. They didnt bother to deliver that unit. Third unit arrives at store but back area around motor all dented up. They order a 4th unit. This unit wasnt dented up so they delivered it. However doors were very off and wouldnt line up so it didnt close properly. A 5th unit was ordered and same issue with the doors. A 6th unit ordered and they called telling me that it was all dented up and needed to order a new unit. Our 7th unit arrived and in 3 days started making funny sounds. Dual ice makers stopped working and inside refrigerator is was very warm. Lowes ordered #8. This unit the freezer doors werent lining up so #9 was ordered. This time everything seemed to line up, no dents however by the third month it started making a funny sound. Dual ice makers stopped working. Warm inside the refrigerator section. Lowes sent out a repair man. He explained a design flaw was not enough insulation around the fan so it was icing up. That was replaced and it was working nicely for 4 months. Same issues with fan icing up, the noise and no ice. The repair man came out again and mentioned what was kind of a recall with the unit. The control panel in the back of the refrigerator was wrong and needed the correct one to be put in. That was done. He told us that we shouldnt have any more issues with it.Same thing again. Same symptoms, same results...we had to throw out hundreds of dollars worth of food. (I just put in an entire prime filet mignon I planned for a special dinner and had to throw it out. OUCH!) Awaiting for the repair man, again. He will be out in 5 more days. Im sure it will be a new issue, a new brand new fix and it will work for a few weeks to months and we will be calling him again.

When you first get the washer it looks like it can get the job done. Its the brand name and you trust to get the best clean from the washer. After a couple of months I dont see them clean. It washes with a couple of shakes back and forth and when my clothes are ready they seem like they were dipped in water. Not clean. It has all these fancy buttons for all different types of cycles and loads and they all seem to wash the same. As a mother of 3 kids I want my kids to put on CLEAN clothes. Not clothes that look like they have just been dipped in the water with detergent. I feel a good on cleaning board and my hands do a lot more than these high priced washers.

The microwave keypad is worn down after 10 uses making it difficult to read the pad. I just discovered the microwave was missing the front leg and they do not have a replacement part so I am stuck with a virtually new microwave that will not balance. It took 4 phone calls to their customer service department to try and sort out the problem. Poor product and extremely weak customer service department.

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

I bought my Whirlpool Cabrio Top Loading HE washing machine and dryer duo in February 2009. I carried an additional extra extended warranty for an extra 3 years. Now, at the dispenser where you add the bleach, it has rusted. The rust has gotten so bad the lid has detached from the body of the machine. I cant understand how a machine less than 4 years old could rust so badly. I called Whirlpool to complain and they suggested I get it repaired and my cost. A car that sits outside in rain, sun, snow and hail does not rust in 3 years. I bought the machines from Home Depot. The way Whirlpool has handled this, I will never buy another Whirlpool.

Bought these Whirlpool Cabrio Platinum combo about three years ago, nothing but junk from the get go! Washer never gets clothes clean, towels always come out smelling mildew and sour no matter what liquid soap you use Tide, Gain, whatever same results. Plus always mold coming from inside tub and yes we use refresh weekly and wash it out on refresh setting. I’m so tired of our towels smelling sour but can’t afford to buy new washer and dryer living on fixed income. If I could these would be in the recycling yard now. From everything I’m reading all new H e machines are crap and energy efficient my foot. I wish for my old style washer and dryer. WHIRLPOOL YOU HAVE LOST A LONG TIME CUSTOMER!

Four months after purchasing an $1,800 stainless French door fridge it began to not cool even though it was running. I called and was on hold for 45 minutes, then transferred to a different service company that could only come 3 days later. They were here a total of 3 times and each time they could not fix it. It would run for a few days or weeks then die again. Each time I lost a few hundred dollars in food. Each time I was on the phone for almost an hour, and each time it was days later before they would come. Whirlpool refused to refund or swap out the unit. I would have been stuck if it were not for Home Depot finally agreeing to exchange it for an LG.I have never been so upset with any companies customer service in my 45 yrs. The only reason that I am writing this is because my Sony 65 TV died the other day. It was 6 months old and I called Sony. They answered within four minutes and quickly decided to exchange it for a new one and extend my warranty for 2 additional years. There are still decent companies out there. I will never buy another Whirlpool product again.

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

Bought this machine in Feb 2007 as a pair Whirlpool Cabrio. I loved it for almost two years. The control board went out, Whirlpool replaced it. A couple of weeks later, the F-1 codes started then the F-51 codes. On July of 10, it was code after code. It sounded like a jet taking off and constant unbalanced load. I called repairman and was told to go buy new machine as repairs would start at $500 and since I live in a rural area, no one wanted to waste their time. Two repair techs told me point blank they wouldnt even touch it. We paid $1000 for this machine and we live pay check to pay check. I spent four months trying to get Whirlpool to do something. I kept getting told I should have bought extended warranty. Machine has been sitting under stairs for over year waiting to see if class action or recall can be done. Also when control board was replaced, the repair man told me it was rusting away from the inside out. My husband had to find us a used washer and this thing has done nothing but cost us money. So much for efficiency. Everyone posting here also needs to go to Whirlpools Facebook page and post there.

Our refrigerator had ice maker problems from the beginning. After 6-7 trips (with a warranty extension) they got it fixed. Then randomly the ice melted, made a puddle in fridge and on the floor, the freezer thawed. Then it would begin running after several days. Finally Whirlpool recommended we replace the computer brain for $1000 PLUS. The refrigerator is 4 years old. We are having a Bosch delivered today, even though the ice and freezer turned back on after being off for 3 days. Customer satisfaction stinks.

We purchased the gas slide in range with gas oven. Immediately the temperature would hold a consistent heat, therefore it continually reset with a start sound (swoosh) every 5 minutes. The manual says it will do this, but clearly this is not normal. Then, the oven stopped working, showing an error message FBE0, that the cooling fan is not at high enough speeds! It sounds as though, along with hundreds of other people, we have all been ripped off! If anyone can please tell me what can be done about these defective stoves, I would appreciate it, thanks very much!

I purchased a Whirlpool washer 7 months ago, and a month ago, it broke. I have been without my washer for 1 month, and it has been repaired 4 times in that month. It is still not working. All I get is that, its under warranty, and there isnt anything they can do, but to keep trying to fix it. I have been having to take my clothes to a laundromat, and pay to have them washed. I have asked for them to deem it defective, but they refuse.

We purchased it from Best Buy. It was a good thing we got the extended warranty. They completely rebuilt it two times. In the 6 years we have had the washer. The motherboard went out. The bearings went out. The only thing nice I can say is that it’s a top loader and doesn’t get smelly like the front loaders do.

I bought the Whirlpool gas water heater less than 1 year ago from Home Depot. It does not work. The pilot light will not spark to ignite the gas. Customer service is never available when you call, you get a message machine. Going forward, I will never buy a Whirlpool product and I will recommend friends and family to boycott Whirlpool. The 6-year warranty is worthless. You cant rely on the warranty. You cant rely on the water heater. You cant rely on Whirlpool to stand behind their product. The water heater is junk.

Purchased a Whirlpool hot water tank from Lowes 5/12 and have had NOTHING but problems with it since day 2. The tank I replaced was around 20 years old, never a drip, never a problem, it just finally rusted through.. Well this piece of JUNK I had installed is just that JUNK.. I have been in contact with this company many times, they ALWAYS have a new story. I replaced my old thermal expansion tank 3 months after buying this JUNK because I was told it could be that. Well that didnt fix anything and cost me $60.00, then it was pressure relief valve, ok, another $20.00, nope not that. Well back on the phone and emailing this company, now they tell me I am not vented correctly, because with all the repairs being done on this tank, my Son noticed the top plastic pieces melting. Well back on the phone I go, and of course Whirlpool tells me, its me again.. Had piles going into my chimney replaced, no help, replaced thermal expansion tank again, no help, replaced pressure relief valve, no help. So sick of cleaning up water I want to throw up. Well I now know why they say, do not return to store where you purchased it, because it is bad business to have Lowes parking lot, looking like a Whirlpool graveyard for their product. .

Whirlpool Cabrio washer - Its very expensive and it quit after 3 years. Repairman said computer component went out and it would cost $450-$520 to repair and it wasnt worth it. He also told me I should have read reviews first. Whirlpool said I should have bought extended warranty. No more Whirlpool appliances will be bought for our homes or business.

We purchased a Whirlpool Energy Smart Electric Hot Water Heater with a 12-year warranty from Lowes on August 30, 2010. The water heater stopped working and the green light was flashing three times. We contacted Whirlpool since it was less than two years old and they were very rude to us. They told us it was the sensors and we would have to change them out. We waited while they sent the sensors to us. We installed them and it still would not work. It continued to flash three times just as before. We contacted Lowes where we purchased it and they were extremely apologetic and said they would be glad to replace it if we could get an RA number from Whirlpool, but that many others have been having a hard time dealing with Whirlpool. We contacted the rude people at Whirlpool again. They said they were not surprised that the sensors did not fix it. We asked for an RA number so we could get a replacement (after all, it did have a 12-year warranty). Now we were days later with still no hot water. Now this rude technician said it was probably the control board. I asked him if we were going to have to be without hot water until we changed every part on the unit. At this point, we just took the hot water heater out, put it on the curb, and went and purchased a different brand. Whirlpool has lost us as customers for life. If their other products are as horrible as that hot water heater, I wouldnt take any if they paid me to. They were by far the rudest and most hateful people we have ever dealt with and life is too short to be treated that way. I predict they will be out of business in no time with the garbage they are putting out.

My oven is less than 2 years old. The blue enamel has had cracks for over a year & was told its cosmetic & theres nothing that they can do about that. Now its starting to pop off. I found a few slivers in a vegetable dish! Now I cant even use the top oven because of this! It seems to only affect the bottom of the top oven. I feel that the temp may be getting too hot for the blue enamel which is another safety concern. I have contacted Whirlpool/KitchenAid to be told that if they send out a repair person he would just use a marker on chips. I was told they would give me an employee discount from $3000 to $1800 to replace but I would have to act right away for that price! Really? My oven is only 1 & a half old.When I started researching this problem I am having I found many complaints of people having the same problem! As a consumer I feel so mad & frustrated that they are not doing anything about this since its an ongoing complaint from so many dissatisfied consumers. I do believe it is a safety & health risk now that its showing up in the food that has been cooked in that oven. I would urge anyone thinking of buying a Whirlpool/KitchenAid cobalt blue enamel oven not to! They will not stand behind their product & you will have to replace at your own expense. Shame on you Whirlpool!

I originally purchased a Whirlpool hot water heater in 2005. After numerous problems Whirlpool agreed to replace January 2010. With the new hot water heater, everything was fine for the first two years. Now about every 6 months, we are having the thermocouple and the igniter. Each time you order the part, the part is free but you have to pay $30.00 for shipping. I am tired of dealing with this. We have decided even though we still have a warranty left on the hot water tank we are going to purchase a different one and never ever buy another Whirlpool product. They do not stand behind their products.

Bought expensive fridge 2009. Now (2015) random very loud rat-tat-tat sounds lasting 5-10 seconds. Very loud. Paid for repairman to evaluate. He said it was probably compressor spring and other springs would probably soon break and would shut down fridge. Said it is very expensive to repair and it would be best to dump the fridge and buy a new one. I called the 800 number located inside the fridge. Jacob at Whirlpool listened to my story and said, Yep, it sounds like the compressor spring and the other springs will likely break. He said he can make me a one-time offer of a full repair of the compressor for only $359.65. We pay Whirlpool and they will have a local guy here come and fix it. We paid by visa.And, via email we get a document that shows we just bought a service contract. This is a surprise to us as we were told were paying to have the compressor repaired. In a few days, a call comes from local repair shop. Guy says, he will come out and check out the noise and see if he can repair our unit. We tell him the noise is intermittent and we cant predict when the noise will occur. We also tell him Jacob from Whirlpool said it was the compressor and that we paid to have it repaired. He says it doesnt sound like it is the compressor and that he cant diagnose the problem if he cant hear the noise. We tell Maytag/Whirlpool via phone we are faxing formal request for refund of our $359.65. Lady from Whirlpool says we, should get a refund in 4-6 weeks. Well, we will see.We are very disappointed in the the short life of our very expensive fridge and we are disgusted with the false and misleading comments made by Jacob of Whirlpool. He told us we were paying for the repair of our compressor and instead we get a stupid service contract. We are in the process of buying a new fridge. And no... It will NOT be a Maytag/Whirlpool!

I bought my 50 gallon gas water heater in December 2015. When kicks on it rumbling. I called warranty and they said We will send tech out but I will have pay the labor. Why do I want pay for a tech if the quality issue is the water heater. Need pay $180 for person come out say its defective. No sense to me. Then when they tell me need new water heater pay them for install. You can check my accounts I used to shop Lowes and will no longer do it because of this service.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

Love my new fridge, not in love with the icemaker though. Every couple of days I have to reach in and scoop the ice off the little shelf in the back, or else it will quit making ice. The ice cubes block the arm from coming back down to trigger a refill.

I bought a brand new Whirlpool fridge early June with the extended warranty to have it shipped on my moving day on June 18. The team delivered and installed the fridge and told me to wait 3 hours before plugging it. I went and spent over 300$ in groceries only to find out the fridge does not work. I waited 24 hours, still not working. I had to wait until Monday to call the customer service because it is closed on weekends. I had to throw out all my food and order food all weekend which incurred an extra 200$. I called Whirlpool on Monday and was told a technician would only come on June 30th. 8 DAYS LATER!!!!I did some research and found a certified whirlpool technician myself who was able to come the next day only to find out the fridge has no gas and this is an assembly defect - WHIRLPOOLS FAULT. Whirlpool would have to send me a brand new fridge (These fridges are NOT TESTED?!). I was asked to call to arrange the exchange, I asked for compensation as I have already spent over 500$ and now would have to wait another week with no fridge and they refused to compensate....They told me I would get a call in the next 48 hours to let me know when I would get the new fridge and 3rd day later, still no call.I received a call on Friday to tell me they approved the exchange...Really now and would have to wait another week. That is over 2 weeks with no fridge, I sent a private message last week to Whirlpool, no answer, I spoke to customer service twice, they cant help me and do not want to compensate me. I have never been so frustrated and mistreated by a supposedly « reputable » company? WORST PRODUCT AND CUSTOMER SERVICE!!! DO NOT BUY!!!!

My brand new Whirlpool washing machine has been nothing but trouble from the day we first used it. We are now reaching out to try to contact the warranty department. Weve tried email and phone both and are having ZERO luck even getting a human to talk to about the problems. No response. Took forever to even find what we thought was accurate contact info. Lowes doesnt stand behind it. Now Whirlpool has a crap warranty department. We were warned and should have never bought it to start with. It is a total waste of money.

Found after care service as bad as oven performance. Phoned for advice and told need to get used to new oven. My advice would be do not buy whirlpool ovens.

I purchased a Whirlpool refrigerator in 2012 and now it does not work and Whirlpool says a 1300.00 refrigerator only has a one year warranty. Please do not purchase a Whirlpool brand because they do not live up to their brand name.

Purchased Cabrio washer in June 2011; in May of 2014 repairman said tub seal was leaking and new bearings were needed at a cost of $400. The washer was still working, but sounded like a freight train, very loud. My trusted repairman said to purchase a replacement, this time with an agitator (the Cabrio has no agitator). 2 additional points : the Cabrio took 63 minutes to wash sheets; other loads required similar long cycles, something they dont mention with new efficient washers. Also, agitators will no longer be manufactured in washing machines within the next 2 years. : (

After 22 years, I replaced my Whirlpool, electric, 50 gallon water heater, due to age and it was still working well. Went to Lowe's and they do not carry Whirlpool any longer, so I purchased and installed an A.O. Smith water heater, electric, 50 gallon water heater, model ES12-50R55DV110. Hoping for as good a product now, as I had from my Whirlpool. Also, I installed myself.

Our daughter has a Whirlpool Duet front loader washer & dryer combination which is less than 3 years old. The washer shows fault code 71 and will not run or release the door lock. The first repairman said the interface board and/or a computer will need to be replaced. Cost is $600 to $1,000. I called Whirlpool. They recommended their trained tech be called out. He looked at the broken machine and determined the interface board was bad, and he put a temporary repair on the washer and said Its okay to use for now. He will return in 2 weeks with the replacement part. We tried the machine with a load of clothes. The machine filled up with water then quit, and the door was locked. We called to get a tech to open the door so we could retrieve our clothes. No one is available for 1 1/2 week. I called Whirlpool and was told a claim form would be mailed to me so we could be compensated for the damaged clothes. The letter arrived. I was appalled when I read it. First, it came from their Legal dept. The intent was to scare us into getting a lawyer or just use our homeowners insurance for the damaged clothes claim. I called Whirlpool back several times and was told too bad, so sad. Whirlpool might make a good machine; they cant prove it by me but their support rates a big zero.

Cabrio Washer - Absolutely the worst thing I have ever bought... everyone told me to stay away from this brand. Bought in 2011... large tub... nothing but problems. My last washer was great... full tub with water, could soak or pre-wash. This one does nothing except create some kind of lint all over my clothes no matter what setting... I dont care about water usage (mine is free) but I do care it takes 50 mins to do a load where my other was exactly 20 mins (and it lasted me over 30 yrs!). This really sucks. I have seen other complaints but never a recall!!! NEVER EVER AGAIN!

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

I’ve been struggling with this new washer since I bought it a year ago. It’s sold as a water saver machine, but it continually leaves white residue and lint on my dark clothes that will only come off if rewashed with no soap and no other clothes. The technician who came out ran a cleaner through the machine and that was it. It’s recommended that the cleaner be used once a month, but it doesn’t seem to do any good. Per the appliance dealer I’ve reduced the amount of detergent I use to a tablespoon. I still get the residue. Definitely not a water saver and a crummy washing machine. Don’t buy Whirlpool!

I bought it on 11-24 13. I called Whirlpool on 1-29-13 and got no response. I called 3 or 4 times and still havent heard from them. Its now 4-1-13 and still nothing. I tried many times and got the runaround from them. They owe me money for repairs to the heater. I will not ever buy from them again. Just thought you all should know about this.

My Whirlpool Gold, Model # G16FDRXxQ06, has failed four (4) separate times. In each case I lost thousands of dollars, mostly in high-quality frozen foods. A Sears repair service representative came and repaired the refrigerator. In less than a year, after each repair, I had to call again. Three of these failures resulted in the loss of my food because the refrigerator simply stopped running. Unfortunately, I had been away from home for more than a week. One failure was caused by water leaking. This was apparently caused by a frozen pipe under the refrigerator. The repairman said that this was a routine failure for this Whirlpool model. I would like to recover my financial loss from Whirlpool. Is there a process to claim my loss? Is there a better, more reliable refrigerator?

Just like many other reviews about this brand - our microwave went bad after only 14 months of using it. Initially the door sensor would register - it wont operate even if the door is closed. Or it will keep going even if the door is open. I contacted BBB and the Whirlpool corporation regarding this safety issue. I pointed out that the safety mechanism is faulty and they should recall all of those models that have similar issue with door sensor. This is extremely dangerous for households with kids. There is a reason why this safety mechanism is mandatory in all microwaves! Whirlpool pointed out to me that I should not try to operate microwave with open door and refused to take any responsibility. Ive owned probably 10 different microwaves over the years and NEVER had micro go bad after only one year, yet alone have completely faulty safety mechanism. Consumer beware!

This washer is 5 years old and the top is rusting out on the inner rim. I have city water that has been tested and found to be totally safe to use and drink. Neighbors using the same water and owning different brand washers have no rust problems. Does anyone else have the same problem with their Cabrio washer?

We have had a Whirlpool Refrigerator since 2004. We have only had minor issues with the ice maker within the last 3 years. We have had no major problems with this refrigerator. The other minor problems have been the quality of the drawers. After 15 years the plastic started to crack on them.

Handle needs smarter design. I purchased model #WRT311FZDM00 in November of 2015, didnt install in my new home till December. I am a single senior female, so there is little wear on the fridge, unlike a family of several people and with kids. The door handle actually broke just behind the screws that hold it in place, the plastic part of it broke into a couple of pieces. The cost to replace this handle is approximately $80, which is ridiculous in my opinion. Please start making things of quality materials instead of cheap plastic, especially at a stress point of a part. Even I know better than that. All 4 of my major kitchen appliances are Whirlpool, as well as my washer/dryer. I thought I was buying quality products. Hopefully things will hold up better with the other ones.

I purchased Whirlpool dishwasher, model DU930PWSTO, in 9/2007. It quit working in 5/2012. I expected an appliance made by a reputable manufacturer (Whirlpool) to last longer than five years. It seems like a manufacturing racket where they build these things only to be replaced a short time later. With service calls and parts replacement, its cheaper to buy a new unit. Talk about a circle jerk! And who the heck puts anything else but SS screws in a water soaked appliance? Duh. Rust! Im disgusted and dissatisfied with the whole company. Im still waiting on their response to my complaint email; at the time, the machine quit working. Whatever happened to pride in American made products? Or, did this get company bail and were now slaves to the Chinese junk once again? Ill never buy another Whirlpool appliance again. Does anyone have anything good to say about this company? I wish I would have read this blog before purchase.

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

Bought Whirlpool 30 gal propane water heater in Feb, it lasted until May before the unit died. Paid for the extended plan warranty (NEVER do that!). Called support and they said they could send someone out in a little over a week (week with no hot water). The week goes by and on the day it was suppose to be repaired the guy calls and says his van broke down (this was a Friday, getting that early weekend). The earliest they can reschedule is in another week (over 2 weeks no hot water). Called Lowes to see if I can just return it (extended plan and all), no, you need a return code from the whirlpool customer support. Call the Whirlpool number again to ask for a return code, no, it is a repairable problem (even though no one will come repair it). Lesson learned, will never buy Whirlpool or anything over $50 from Lowes again.

Purchased over range microwave WMH31017AW-2 from Best Buy Mar. 12, 2015 and after installing it noticed code Door appeared and that there also was a dent on side. They replaced on Mar. 19 and we had the same Door code problem. Called Whirlpool and they sent out a Tucson repair tech and he ended up coming out at least six times changing 3 switches, 2 cams, 2 brackets, control board, and line filter. Still had problems and Whirlpool requested he call their tech and he did and they told him to make the same changes and he told them he already did all that and there still was a problem. Then Whirlpool told him to switch some wires on control board which did not solve anything. Then second thing they told him was to file and clean door brackets which also did not solve the problem. We called back to Whirlpool to tell them we did not want this defective microwave any longer as all these repair trips were not solving anything. They wouldnt give us a answer right then and said they would call us back 24 to 48 hrs and we are still waiting. We will never recommend Whirlpool to anyone nor ever buy from them again.

After 7 calls to Whirlpool and 3 service calls, we still have white detergent stains on all our clothes. Today Whirlpool told us we needed to put one item at a time into the machine. Not only that, but pants needed to be loaded waist band up and gently placed; Shirts, collars up; socks toes down, etc. etc. Are these folks at Whirlpool serious?? So today, we called them back - still streaks. The folks at Whirlpool want us to take and send them pictures of our clothes. This is ridiculous.

Whirlpool side by side. When the compressor cycles, there is a loud knocking noise. Called Whirlpool when under warranty with no results. They could not tell me the cause of the knocking. Sort of live with it attitude. The funny part is when we have someone visiting and the knocking starts, they are puzzled as to why we are not answering the door. Sounds like someone knocking on the front door. We have been whirlpool customers for 30 years. Probably will not be so in the future. Too bad that a great company has go the way of the Nash and Studebaker automobile.

I purchased a (second) Whirlpool washer (WFW87HEDW0) in October 2014. Since purchasing (and to this day), I manually dried the rubber gasket after completing my daily washes, knowing that mold growth was possible. I wash one to two loads of clothes about three to four days per week. During the first year, I did not notice any mold in this area and was confident that the manual drying and cleaning with Affresh was preventing mold growth. However, at the beginning of this year I discovered a little mold growth, which has slowly been increasing, in the inside lower lip of the rubber gasket. The image attached reflects mold in its current state. I was very surprise to see this happening since my diligent cleaning has been thorough and never ending. I even remove the soap dispenser tray to clean and air dry it outside of the washer and leave the washer door open at the end of the daily washes for extra fresh air circulation. This is my first official complaint about a Whirlpool front loader washer, even though I previously owned another (GHW9200LQ0) before this one and had mold growing on the rubber door gasket but, unfortunately, never officially complained about that old machine. Now, I dont qualify for the $500 compensation because I never officially complained three times within the first five years of owning the old washer. To my dismay, I did not immediately realize I had mold growth in the old washer. It was only until years later that a repairman told me that I had mold growth in it. In addition to telling me the price of replacing the rubber part and replacing a broken water pump plus labor would cost as much as buying a new washer. Before purchasing a new washer, I researched and read many reviews about Whirlpool and other brands before deciding on this new Whirlpool. I decided to give Whirlpool another chance and to follow their recommendations on the proper cleaning of the machine. Once again, I am disappointed and angry with Whirlpool and, now, have to figure out what to do with my current situation.

Bought this washer in 2013 for close to $800. About a year and half old it got real loud sounds like a freight train. Asked whirlpool repairman about it, and was told it is a main bearing going out. He said it would cost over $500 to fix it. Whirlpool warranty sucks - only one year. Called whirlpool, told them the problem and asked if this is a problem with this washer. Got told no they have no problems with it. Found out later not only do they have this problem with it they change design because of it. Repairman said his own daughter had same problem and he had many service calls on this model all with same problem. WHIRLPOOL WILL NOT REPAIR OR REPLACE PRODUCT WHICH IS A MANUFACTURE DEFAULT. It sets in our house unusable. I will never buy a whirlpool product again. Sad because that use to be all I would buy.

We purchased the model WFC7500VW, 24” washer and accompanying dryer in June of 2015. Within a couple of months, the water pump went; also we continually had to take the front panel off and clean out the filter when we get an A11 code! Now we experienced an F06 code... This code means the washer can’t go into high speed. The repairman (Whirlpool recommended), told us that a new tachometer motor, etc would run $500-$800 with labor! He also said that the noise the drum made was bad. My dryer works fine (only complaint is the grinding noise it makes, which Whirlpool told me is normal)... I would like to purchase a new washer, but don’t know what will fit under the dryer. I do not want ANY Whirlpool product!

This is our second Whirlpool refrigerator that has the same defrost water drainage problem. I was told this newer model had updated technology, not so, actually it is worse. My older refrigerator went about 8 years before I started noticing water on the floor and this newer model is 4 years old and it started having water overflow at 3 1/2 years. Then in April we replaced the water filter and the ice-maker stopped working. My freezer also stinks like stale water (my reason for replacing the old refrigerator plus the water on the floor). I followed a YouTube video for defrosting the drainpipe, it was very tedious, labor intensive, and time consuming and worked for 3 weeks. This is very upsetting. After spending $2500 to have such problems and my expensive $150 4-year extended warranty expired just weeks before the ice-maker went out. This is obviously a design problem that Whirlpool refuses to address since my other model was a year 2000 model and my 2013 has the exact same problem. VERY POOR customer care in addressing these design failures of both the defrost drainage (just make a larger drain port!!!) and the ice-maker.

We had purchased matching Whirlpool Cabrio HE washer and gas dryer. Both appliances were worthless. Same problems as everyone else. Clothes did not come clean. Had to put it on bulky items just to clean the clothes due to lack of water. Funny how all the older machines that actually put water into the machine cleaned clothes. Went through a motherboard (computer) for both the washer and dryer at $250 each. Washer had repairman out at least 12 times over 3 years. Never again would I purchase a Whirlpool. We went to our local appliance dealer and purchased a Speed Queen. These are like the older ones. THEY WORK! They use the correct amount of water and wash your clothes in half the time. 22 minutes per load! You can open the lid while the water is running in and load your clothes. Gee, what a concept. Only company still making them in Wisconsin, United States. Go Wisconsin! They back their product with a 20 year warranty. What?? Who does that anymore? Companies who stand behind their product. We love our new Speed Queen.

Clothes dont always come out clean. If there is anything more than 2 sheets in the washer, it becomes unbalanced and then goes through a rinse until the water is up to the top! You have to watch any heavy load for this! Today there were 3 sheets in the washer and sure enough it kept rinsing until I physically reached in and rearranged the sheets. Then when it was done and I pulled the sheets out to put in the dryer, they were SOAKING wet! I hate this machine and will NEVER get an HE washer again.

Whirlpool Cabrio Model WTW6500 - I ask all of you to stay away from the Whirlpool Cabrio sets. I have spent hundreds of dollars trying to fix my washer. I just spent $260 for a computer board. Now it stays on rinse cycle. So now I need the motor sensor harness which is another $90. Service call $80 x 2. So, now I am going to take the computer board back and get my 260 dollars back. For the cost of $400 to fix this washer. You can go and buy a new one for around $400. Then, Im going to the lawyers to file a class action suit against Whirlpool. So, owners; be looking in your mailboxes for a class action suit against Whirlpool for those who own the cabrio set. Im tired of having to deal with whirlpool customer service. Maybe, whirlpool should think of having their laundry made back in America.

I purchased the Whirlpool Cabrio, Model no. WTW5640XW2, on March 3, 2012. I have tried every setting and water temperature and am totally dissatisfied with the washer. It does not clean clothes, tangles them into a twisted mess which requires that they be vigorously shaken out, destroys anything with a draw string. I had an online chat with a representative and was told she was sorry. I posted to Facebook and did receive a call from a repairman, which I will return; however, I do not anticipate receiving any satisfaction. The machine is worthless for washing clothes. I was better off with my 12-year old agitator Whirlpool washer. I do not understand how this machine can be allowed to stay on the market. Id be better off at the river beating my clothes against rocks. I hope someone will get on Whirlpool to give consumer refunds. I have been brought to tears by this machine and I am one tough cookie. Please help!

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

I went from an HE front loader to an HE top loader (Whirlpool Cabrio WTW7000DW0) due to the risk of mildew with the front loader. Im not the only one doing laundry and if someone else does it, it always seems that they shut the door when empty, contributing to moisture and mold that needed to be cleaned out of the gaskets. I am so unhappy with my top loader HE washer. When I stop the machine and look, I always see my laundry half covered with dingy water, sometimes part of it still dry at the top and it is disgusting. I frequently have to rewash loads due to detergent getting trapped in folds or pockets created that hold on to dirt and lint, even being careful with the detergent amount. I run the washer now every time with settings of deep water, extra rinse, heavy load and presoak with instructions, with settings taped to the top for others.At almost 1 1/2 hours each load, we just cant keep up. The laundry still forms pockets and sheets form a giant tent over the entire load that has to be unraveled at the end of the cycle and wound so tight it had no chance of rinsing. I had to get a repair person out because it got out of balance and he had a small hand-held computer to enter a code to rebalance it. When we discussed the issues I was having, he was ready for everything I was doing wrong. He told me I can not wash blankets or large items (I thought I was buying large capacity with such an enormous drum). He told me they have caught people adding water with a bucket during cycles and that the washer software can tell them if people are trying to work around the system which voids the warranty.Apparently, this is a common complaint he blames on the government wanting high efficiency so they make the numbers look good, sacrificing the ability of the washer to perform at what a consumer expects. I have never seen the water in my drum higher than a couple inches and the drum is HUGE, but never used to capacity. He told me his wife demanded they get a commercial washer because she was so angry about how poorly it cleaned. I feel so scammed and I wish I could have my old agitator back. $100 for the repair call, $150 for the code to be put in and Im on warning that they will see if I try to add water, run out of balance or dont comply with any reason they can void the warranty by just checking the data the washer is collecting on us.

I bought YMFE330W0AW0 Whirlpool on sale less than a year ago and I have been angry since almost the beginning. This is a cheaply made product which angers me because Whirlpool is supposed to be a quality product. The clock cannot be set because we have to press really hard and that part of the stove head is broken now. I knew this would happen after only a few weeks but was wishing it would not. There is a lot of heat that leaks out of the oven continuously when trying to bake something. The top is horrible. This stove top does not keep an equal heating element so if you put it on low, it actually turns off for a few minutes and becomes red again for a moment or so. It is impossible to cook anything evenly. I HATE and DETEST this stove. The worst product I have ever known. If it is on sale...BEWARE.

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

I bought my first Cabrio set in 2008 to replace Maytags that lasted forever but looked their age on the outside. No problem with cleaning and drying, just wanted something new. What a mistake! I looked in Consumer Report Guide to pick and found the Cabrio set. Had problems after the first 4 months - UL uneven load codes flashing up, and had to replace suspensions and bearings, boards, etc. Unfortunately within that 4 months I bought another Cabrio set to put in my vacation home. Started with the same issues and really hard to get a service technician to come out because of where we were located. Customer service with Whirlpool sucks as well as Sears service. It is AMAZING to me that Whirlpool will NOT stand behind this product. I am writing this as I see an F1 code flashing on my washer here at my second home. I have a load of towels in it and house guests arriving in the morning! I will be trashing this washer and dryer and finding something old school and reliable. I want no bells and whistles, just clean and dry clothes. Whirlpool, you should be ashamed.

We have had our catalytic oven explode into millions of hot pieces again for the 3rd time. Contacting them they sold me an extended warranty which Im trying to cancel and have been trying since 30th Mar to contact on ALL of their lines. It is permanently on hold or engaged. This company should be avoided at all costs. If you work for this disgusting company DONT!! You will be out of work soon! It is unbelievable how bad they are at responding to their (now ex) customers. What the hell are we in the EU for when a supposed UK co is Italian and they never respond (AKA 1940). Ludicrous! Incompetent! Stupid! Totally without comprehension. Do NOT buy ANY INDESIT or HOTPOINT products EVER!!! They are dangerous and you will NOT get any help to put them right.

Whirlpool duet steam front loader - The rubber gasket ripped about a year ago and cost over $400 to have a tech come and repair. Then the water level switch got bad and cost another couple hundred. A year later, the rubber gasket ripped again. What a junk washer. I am ready for a lawsuit because Whirlpool will not replace it.

I bought my Whirlpool water heater from Lowe’s in 2010 and now 2 years later, the pilot light keeps going out. When I tried to buy replacement parts from Lowe’s, they stock parts for other brands but no parts for the brand they sell. The water heater is junk and Lowe’s is no help. I will not buy from Lowe’s again.

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

I like the dishwasher. It cleans pretty well. Some time it soap doesnt open and the dishes don’t get cleaned. But when it’s working good the dishes get cleaned very well.

I purchased a Cabrio high efficiency washer in 2011 and have had the glass top lid crack twice. The hinge is rusted, shedding rust all over the corner of the washer. It is a design flaw, for I see others have had the same problem with this particular year. I have also looked at the newer versions of the Cabrio and the lids have been redesigned. This lid should be recalled and replaced with a newer version, because this lid will always rust and crack with use.

3 months after I got the fridge, the ice maker went out. 3 months later it started to work again. Replace the water filters 2 times per yr. It is noisy when it makes ice.

Does not clean clothes as well as I was told it would. Very dissatisfied with the price and performance and would not recommend this brand to family members as well as friends. With the way the current economy is, companies like Whirlpool should reduce their prices!

Standard looking dishwasher. Quiet and efficient. Best value for the money. Highly recommend. Chose this brand over more expensive options and made a great decision!!! I dont have a single complaint.

The worst washing machine ever. First off you cannot turn the water on to let it fill and add clothes as its filling. Secondly the Normal setting will not allow you to spin on low, your choice is high or no spin. High tangles your pants, slacks, shirts, etc. No spin leaves them soaking wet. Also its a water safer but never, never, never covers the clothes in water, and sometimes they dont come out smelling so clean. I dont save water if I have to rewash two or three times. Absolutely hate this washing machine. When I get enough money I am going back to the old agitator model and not any Whirlpool either. Oh and the other thing, you cant just throw you clothes in the washer, you must arrange then to the outside of the center itty bitty agitator. Hate it.

Warranty services are trouble. For one (1) simple washer part its taking over 2 months. They state its on back order...while my food is wasting away. Whirlpool didnt even know what he was doing, and to the top it off, forgot to put back the part he took off!

We have a Whirlpool with freezer on top, nothing fancy in the apartment we rent. Twice the lines have clogged up with ice, causing the water to pool in the bottom of the fridge and then leak onto the floor. The maintenance man said this was a common problem in the complex with the refrigerators. Tonight, I heard noise coming out of the fridge. It was so loud it scared the cat. I went to check on it and a juice bottle had exploded in the fridge. It cannot keep an appropriate temperature. Things up front are barely cool and things at the back freeze. We are moving and unfortunately, the house we are buying has Whirlpool as well. When it comes time to replacing the refrigerator, it will not be a Whirlpool!

We purchased a Whirlpool Cabrio washer and dryer set in 2013. In 11 months we have made at least 6 calls concerning the same issues machine leaving white residue on clothes. It has been one thing after another. Today the manager told me that my warranty only covered parts and not a replacement machine. I am washing my clothes two or three times to get them so we can wear them. First this is not saving water, energy, time and most of all CLOTHES. We are wearing our clothes out washing them. This is unacceptable. With this many complaints, the company has to know they have a machine with issues. I will never purchase Whirlpool again. I think we should all band together and file an action against Whirlpool. These machine cost too much money to be crappy.

The control knob broke off the washer when it was only two years old. I contacted Whirlpool by email about what happened with the dryer. The control panel is held tight to the dryer now with duct tape and the knob is held on also with duct tape. The knob doesnt work. It is stuck on timed dry so I can at least use it and adjust the time. I cannot use any other setting. It would cost about the amount of the dryer to have it repaired. The customer representative informed me that sometimes things dont last. Im glad for his profound wisdom, but Im stuck with a dryer held together with duct tape. I was offered an extended warranty, but the cost of repair will be nearly the amount of a new dryer. I will seek a different brand in the future.

2 loads of clothes and it is broke. I tried to call Whirlpool to no avail. So I called Costco where I bought this machine. They at least talked to me. Promise to get a hold of me tomorrow. Brand new (2 days old) and this happened. Didnt even finish the second load.

We bought the Cabrio washer and dryer on June 2008, and it wasnt very long after that, that we had to have a repair done. Then, it started twisting the clothes and the sheets into a big knot. Two king size sheets and 2 pillow cases got so twisted that they are no bigger than a watermelon, and believe me, they are very hard to untangle when they are soaking wet. The machine in the drying cycle sounds like a commercial jet taking off. We can hardly talk above the roar of that thing. I hate it with a passion. Whirlpool used to be all we bought, but that is going to change.Linda

Whirlpool Cabrio - 6 Big Problems: I dont write bad reviews on anything but in this case, I feel I have to warn potential buyers. Ive owned this washer for more than 4 years. Here are the problems: 1) This washer TEARS HOLES in my towels; 2) It SHREDS some clothes; 3) Loads are UNBALANCED every time I use it, regardless of load type or size; 4) Very LOUD when running. My neighbors can hear it and they are 150 feet behind us. It sounds like someone is pounding on the walls of my house. BOOM! BOOM! BOOM! I havent seen it, but I believe it might actually be jumping off the floor; 5) Its NOT High Capacity as advertised. Sure, the drum is big, but you cant put much more than a tiny load in it. If you try a larger load, the clothes dont get cleaned; and 6) Whirlpool wont do a darn thing about it. They dont care about the buyer or their own reputation.Our family grew and I thought we needed a larger washer. I foolishly replaced a ten-year old, $300 standard top-loading GE washer that never had a problem, with this expensive **. The GE had a drum that was about 1/2 the size and it washed MORE clothes! The GE never damaged any clothes and it wasnt ridiculously loud like this one. I regret ever buying this expensive washer and I will never again buy a Whirlpool product.

Bought the hot water heater, installed it. It leaked from bottom. Whirlpool warranties it. Replace it with new heater. It too leaks. I Google problems with Whirlpool hot water heaters. Found over 1500 complaints.

We purchased the Cabrio Whirlpool washer from ABC Warehouse October 18, 2014. They said if we purchased a washer of higher quality it would last longer. We have bought Whirlpool washers for over 40 years. When our last one only lasted for three years they convinced us to spend more money over 1000.00 witha purchase of a 5 year warranty 6 days over the warranty. It is junk. The bearing went out costing 600.00. They graciously offered to sell me another washer. WOW, everyone is sorry that we have this problem BUT you are out of luck. Are they kidding? I will never buy another Whirlpool. They use to be the top of the line but now I feel we are in a throw away world and talk about consumer rip off. FLEECING OF AMERICA AT WORK!!!!

I had the bearing go bad in the tub after a few years of service. It cost hundreds of dollars. As an engineer, I look at this and it is a design made to fail. The seal design is inferior compared to old washers that had a shaft seal made to be on a spinning shaft. This is a rubber lip seal that is going to wear because it is using washer as a very bad lubricant! When the seal goes bad, and it will, the water runs down to the bearings and destroys them, and you have the replace the whole tub as a $300 part!

We have had every issue with our Cabrio model 6600 SB2 that Kimber of Salem, VA has had. Thankfully, we purchased an extended warranty at time of purchase(1-31-07) from Lowes or repair costs would have totaled more that the price of the washer, which was $900.00.It is now making a loud noise during spin cycle that sounds like a bearing going out. It is 1 month from being out of the 4 year extended warranty and today, 12-26-11, the repairman has told me that the washer needs to be rebuilt. The washer itself, does not clean that well and the clothes are so wrinkled when they come out, that the dryer cannot get the wrinkles out, so everything needs to be ironed. What a pain!We bought this washer because Consumer Reports magazine listed it as a best buy. This is not the first recommendation Ive chosen because of their magazine that I was disappointed with. I have lost faith in them. I would not recommend this washer to anyone. The matching dryer, however, has been trouble free.

I purchased the original Whirlpool water heater from Lowes in April 2008 for $372, and an installation charge of $443, grand total - $815. In February 2012 the tank leaked profusely, enough to ruin a section of hardwood floor in the room behind the garage where it was installed. Whirlpool provided me with return authorization, and Lowes provided me with a replacement water heater. So far so good. Since the original installation was done through Lowes, the replacement had to be as well, according to Whirlpool, but now they charged $500 with tax to install the replacement water heater! Grand total now is $1315. Fast forward to May, 2014 and the replacement water heater, just barely 2 years old, shuts off with a code of Bad gas control valve/thermostat. I call Whirlpool and an extremely rude 20-something staffer tells me the unit is out of warranty by one month! The replacement unit has no warranty at all - nada - only the original one does... Is this unbelievable or what?! BUT, they would be glad to send me the replacement of the defective part for $200 PLUS overnight shipping charges, and I would be responsible for all labor charges to install it. Had I opted for this my original $372 water heater would have wound up costing me in the neighborhood of $1800!! I told her in no uncertain terms what she could do with the repair part, and now I am going to go shopping for a water heater that will last me more than 2-4 years, and you can bet it wont be a Whirlpool, and it wont come from Lowes.

Ive had the WDF510PAY dishwasher for 3 years and the circulation pump broke. To be more specific the impeller inside the circulation pump warped and then basically got lodged because it became oblong and then it wouldnt pump water to the spray arms etc. I bought a new pump because the warranty only last a year. The pump cost around 90 bucks. After not even 1 full year this factory replacement pump failed again. I reviewed other Whirlpool dishwashers more expensive and I found they all have this same junky circulation pump. Im not sure of a better dishwasher but I would never recommend a Whirlpool dishwasher again. They also use the same circulation pump in Maytag and many other brands. Whirlpool or whoever designed and sold this pump to Whirlpool should be tracked down and beaten. Simple products like dishwashers should last more than 3 years. The technology is nothing new. A product should last 10 years at least.