Six months after purchasing my Whirlpool Washer model number WTW5000DW0 I would hear what sounded like rocks in the bottom of spin drum during spin cycles. Then noticed it was taking longer for clothes to wash and sometimes the water did not completely drain. Called for Service under LOWES warranty (the worst people to deal with). Tech comes removes a penny and dime and tells me that is the problem. Leaves. 45 minutes after he leaves there is the noise again. Call and set up for this Service Company to come back. Even though they went out of business prior to the appointment Lowes Service would not listen to me and insisted I stay home ALL DAY for someone who did not show up. Repeated calls to the Service Company resulted in nothing - phone disconnected.So finally after much frustration I am given new appointment with new Service Company - PARRISH. Tech comes in here five minutes and wants to know the sound, I explain. He checks out the unit and tells me it is a major problem and the part and labor will be costly. Best if they just replace the machine. His added comment - I see a lot of this. So if this machine is such a problem why was it not recalled? I am getting a replacement as I have warranty and machine was not a year old when problem started. Lowes Service Contract is another problem but I will deal with that later.

Whirlpool model N40T91 with FLAME LOCK - first failure was the controller valve only within 9 months of a new installation, replaced sort of free of charge, landlord had to pay ship charges. Days and days without hot water. About 6 months later, pilot failed to stay lit. Landlords maintenance man called Whirlpools Customer Service. They had him jump through hoops and finally told him to press a white reset button on the igniter. Okay, that worked. A few days later, pilot went out again, white button was reset, working again. Recently, and more frequent now, white igniter button keeps popping out, and we keep resetting it and relighting the heater, repeatedly, 4 times in one day.Maintenance man comes and calls Whirlpool Customer Service. They advise him to check this and check that. Everything seems to be in order. They say they will send out a qualified service person to diagnose a potential problem, a charge of $200.00. Maintenance man and landlord say, No thanks. Maintenance man goes to Lowes to buy a different brand model. Guess what? Envirotemp Hot Water Heaters have the same control device as the failing Whirlpool. He reboxed it and took it back and said, No thanks. Ill try to upload the images of the water heaters and controller you should stay away from purchasing. Meanwhile, maintenance man went to Menards and purchased a Richmond model, a well known, and reliable water heater manufacturer.

I thank the folks at Whirlpool for building a washer (Cabrio tub bearing failure) that lasted 22 days just shy of four years, better than the Whirlpool Duet that lasted 14 months, tub bearing failure also. Now I have high confidence that Whirlpool pre-engineers failure into every washer they build.

I had a full set of kitchen appliances delivered to me on December 11. The delivery crew installed everything but the microwave because we needed to have wiring done. Three days later an electrician came and upon opening the microwave box it was severely damaged. Whirlpool won’t replace it because I called one day outside their 48 hour window. They delivered me a damaged product – period. It should be replaced without question. Instead they want to send a “cosmetic tech” out to see if it can be fixed. I can’t imagine that’s a more cost-effective method for them. Completely unacceptable. I will never buy Whirlpool again based on their lack of customer service and common sense.

I took a load out of my Cabrio washer and put it directly into the dryer. They had been on high spin. Now they are on medium heat. The clothes seem warm whenever I open the dryer to see if they are dry. They are warm... but not dry. There are no towels or jeans in the load either. T-shirts, underwear, etc. Ridiculous! The last load was jeans. Also 3 hours, but I thought maybe I had it on the wrong cycle. Now I think its the machine, not me.

We recently bought a home and our dishwasher came with the home. We saw our basement leaking and got 2 plumbers come over and check the pipes out, paying almost $600, only to realize that the leak was actually from the broken plastic in our dishwasher, and not any pipe. When we called the Customer Service to get it replaced as it comes with a 20 year warranty on the plastic body, they said they would replace the part, but I would have to pay $81 for the first 15 min & $19 every additional 15 min. for labor, which means I would end up paying at least close to $400 or more, depending on how long the technician takes to replace the fiber body. Neither their policy nor warranty make any sense to me. Its frustrating to see that in spite of being covered, I would be the one paying money out of my pocket.

My wife and I have had a Whirlpool Gold 5.8 cu ft gas range for just 5 months and have already begun to have intermittent trouble with it. She can use the oven to bake cookies in the afternoon and then try to bake dinner a couple of hours later and the oven will not preheat no matter how long she waits!! This has happened three times now and we are waiting for a service technician to come out.. Pretty sad when you buy a top of the line appliance and begin to have trouble so soon.

Disappointed with Whirlpool Gold bottom freezer GX2SHBXVY05. We purchase this refrigerator in December 2010 thinking we were buying a good quality french door fridge. It didnt take long before problems started with the freezer over freezing and the fridge not cooling. We also had a problem with water pooling on the bottom of the freezer then freezing into a solid piece of ice. Water eventually started pooling on the kitchen floor and living room carpet. We did not purchase the extended warranty believing we shouldnt have had to as we were believing a good name brand. After having a repair person in twice we were told we needed a new computer board and switch. Total cost for repair $350.00 plus previous charges, so far adding up to over $450.00. We called Whirlpool customer service, was a waste of time as they simply told me they could send out their own repair person to obtain the same diagnosis I already had. They told me I should have purchased the warranty. I told them I shouldnt have needed to. Whirlpool customer service refused to do anything for me as it was too long past the 1 year limited warranty. Doing my own research I found this to be a problem with a great many Whirlpool fridge owners and I mentioned this to their customer service and mentioned there should be a recall. I will no longer purchased another Whirlpool product as the company does not stand behind their product.

We purchased this washer and dryer new in 2011. Have repaired door to washer twice. New doors total cost $500.00 each time. Now it is cracked yet again and the dryer door has to be adjusted. The temp does not work right. Have to do minimum of 2 cycles for drying. Very unhappy. We may as well buy a new set of another make. Tired of the expensive repairs.

Talked to tech & checked the manual for testing the thermocouple on my natural gas water heater. Everything checked out fine but pilot wouldnt stay lit. Tested thermal switch.... everything. They said replace the valve/thermostat. Still no dice. Turns out the thermocouple was cracked on the inside near the burner assembly & would give passing readings on the voltmeter 9 out of 10 times. If you have any pilot problems, replace the thermocouple first. Was only 10 bucks. I keep a spare now. Dont forget to vacuum any dust from the fine mesh screen on the very bottom. Fresh air supply.

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

I have had repairman out on two separate occasions to look at the dishwasher. It leaks. It’s unpredictable. Unless you run a full three hour cycle the dishes come out with dish soap still on them. I am very unsatisfied with this dishwasher.

I bought a Whirlpool 5-burner gas range with double oven at a cost of $1700. Almost immediately, the finish above the oven started cracking and now is starting to chip off. When I contacted them, they stated cosmetics were only good for 30 days. We had just moved and were getting settled so we didnt use the range much for the first 30 days. I am very unhappy with this product and also unhappy with Sears for their lack of effort.

Purchased a Whirlpool Cabrio Washer a few years back... Started getting F1 error message and just proceeded thru it like most did initially, but now has become pain in the rear just to do one load of laundry as we get the error 2-3 times when we start each load - then on every load w/ 21 minutes left on the cycle. From the looks of things online this is a chronic problem and should be fixed by manufacturer. I called Whirlpool customer service and first person I talked with said they understand it is an issue but no longer are any recalls or reworks on that machine. I asked to speak w/ supervisor and sat on hold until I got one. Was then informed they do know it was a problem but was not something they could do anything about other than schedule a service company to come take a look. I specifically asked if there was at one time a recall or if they were fixing this issue for a while. She said Yes, they took care of some of their customers but are no longer doing that for this model. So basically because I didnt call in at the right time I need to fix my machine myself. I said it will be the last Whirlpool or Whirlpool associated appliance I ever purchase if this is the kind of customer service I can expect... The supervisor just said she was sorry to hear that and to have a nice day. Hopefully enough people read these reviews as I wish I would have before purchasing my Cabrio and dont buy Whirlpool.

I called Whirlpool to have my dishwasher and fridge fixed. I knew exactly what was wrong with my fridge. I asked how much it would cost and was told $129.99. I asked why so much. I was told that it included the labor and service charge. I asked if I would need to pay for both units if I did it the same day. She said that the company provided a 30-dollar discount. I decided to only service the fridge at this time. I spent the entire day today, waiting for the service person to come. And when he showed up, I told him that the fridge needed a computer board. He then started telling me that it would cost $200 for labor. I explain that I was told that it should be $129.99 for service call and labor. And he said, No lady, its $70 for the service call and labor is $200. I then called Whirlpool where I spoke to multiple people within a forty-minute call to explain that this is absolutely wrong and that I am not going to pay for the service call. I then spoke to a Niki (3544) who is supposed to be a manager, who basically said my problem now is with the service company, not with Whirlpool and that there is nothing they can do even if they misquoted me. I agreed to pay $129.99 for service and labor, not an $70 service plus labor. I am so upset because I have been a client of Whirlpool for ten years. I have called for service on multiple items in my home, and I have never had a problem. This is so outrageous. I absolutely expect Whirlpool to rectify this mistake. I am also going to report this matter to the BBB and to Fox News. Whirlpool representatives should be able to provide a quote for one thing, and then when the service comes to your home, its a different amount.

I purchased a Whirlpool microwave at the end of November 2015. Since then it has needed repair 3 times. Now I am being told it is not repairable. Microwave is only 1.5 years old and Whirlpool would not stand behind its product and provide additional warranty service or even a discount toward a new one. When I asked to speak with a supervisor I was just left on hold, 20 minutes later I hung up! Poor customer service!

My KitchenAid side by side refrigerator/freezer is a beautiful thing, shiny steel surface, gleaming white inside. However, its made poorly. The ice cube maker compartment broke and the replacement came without any installation instructions. It was hard to figure out and I broke it. Now, everything in the refrigerator is freezing and changing the temperature on the digital panel makes no difference. McKinneys appliance, where I bought it, no longer has a refrigeration technician and they referred me to Whirlpools 1-800 number where I supplied some information and sat in my chair on hold listening to music for a half hour before hanging up.The recording on the phone suggested their online chat where I was asked the same sorts of questions and was told I would get the answers I wanted by paying $5.00. I had no idea what I was getting into but I didnt pay, just terminated that inquiry. Feeling cheated by the company whose product I had mistakenly purchased. Im now running the risk of a technician visit, sometime between 8 am and 4 pm a couple of days from now. I have to be prepared to wait around all day for somebody to look at my refrigerator, charge me a lot of money and, from what Ive read online, potentially see the problem return in a very short space of time.

Front load washer Whirlpool Model# WFW9400SW02, only had this machine for about five years and the main interface control board has gone bad. This part cost 1/2 as much as buying a new machine. My parents had the same washing machine for almost 30 years and no problems. Whats wrong with this picture?

Without being too critical, I would not recommend this washer for medium to large loads or for throw blankets. I have to wash throw blankets 2 to 3 times to get the entire blanket wet even on deep water cycle. I would not buy this washer again.

This is not a new washer (Whirlpool Cabrio INTW6200VWO) and it works well BUT since we have owned it we have had rust at the bleach dispenser. I am seeing on the internet there are many complaints about this and there was a recall? But they have run out of replacement parts??? Never received any recall notice. We have online instructions on how to repair and have done this many times and the rust comes back. About a week ago we sanded, primed and enamel painted the area plus I have put NO BLEACH in the dispenser and the rust is coming back. I hate to replace a working machine but this rust can and will get on my clothing. Whirlpool was the absolutely best in the past but this one is a lemon.

Whirlpool gas range Model#wfg10h0ah1 with aqua lift technology. This is the biggest ripoff that was ever done to me. It say self clean, not it cleans and then you clean. This is fraud plain and simple. I am handicapped and made it very clear to the salesperson that it had to be self cleaning. 4 times I did the clean cycle and I was in shock, I called repair, I thought the self clean was broken. However this is the line they give you over and over, that its not broken. This is working the way it was designed to work. So they made a range that is self cleaning, but no it doesnt do that. For 899.99, I did not deserve to get duped like this.

Like many other reviews Ive read here this morning, I bought a Whirlpool Cabrio HE Top loading washer before I did my homework. I purchased approximately 2 years ago. While I dont seem to have the volume of complaints Ive read from others, I do have many intermittent complaints. As others have described, from day one I have gone from this uneasy feeling about how it is working to down right POd about the condition of my clothes after a load finishes.List of issues you will avoid by buying a different product: 1. Water levels SO low your clothes dont get clean. Yes Whirlpool, thank you for trying to save me $$ by lowering my water bill, but for goodness sake there should be enough water in the damn tub to cover the load. I literally watch dry clothing twist back and forth and NEVER go out (like they claim) to the edge of the tub and under then back up in the center. Instead they just sit there watching from the edge while the poor items of clothing in the center get twisted together.2. Powdered detergent, even if listed as HE will not dissolve in this low water level and will end up as white patches of film on your dark clothes. Suggestion to avoid this - dont use powdered detergent, but even if you use liquid HE detergent, you may still experience white patches of soap film on your clothes. It happens on all of them but shows up clearly on dark clothes. Setting the washer to always do a 2nd rinse cycle will improve the outcome. Not a perfect solution since the point of a low water washer is to use LESS water and not more by running a 2nd rinse on all your loads.3. No Consumer/User options to allow you to use the washer as you see fit. Since I paid a small fortune for this stupid washer and didnt realize that I would never again be able to dye fabric in my washer I am posting this as a warning to other crafty consumers. DONT BUY THIS WASHER if you ever want to dye fabric or an article of clothing larger than underwear. There is absolutely no setting on the washer cycles that will fill the tub with more than a few inches of water. The washer falsely has a mislabeled setting called Deep Water Soak. This is absolutely a LIE. Good thing I tested the cycle before putting my blanket in there to dye it. The cycle spins many times in the beginning pouring water into the clothes, then empties the tub and does it again. Then after 10 minutes into the cycle it begins to fill (if you want to call it that) the tub.After putting about 3 inches of water in the tub - not even enough to cover the top of the articles in the tub (I used 6 towels as my test subjects) it stops to soak. But stuff is still sticking up out of the water!!! OMG! So frustrating. This would not do for dyeing anything of value as you would not be able to agitate enough to ensure coverage of the fabric evenly with dye. Just dont buy this washer if you have, as I have in the past, enjoyed changing the color of linens and re-dyeing dark clothing that have faded! Whirlpool clearly didnt care about how consumers actually need to use the washer. I may try using this setting by pausing and filling it manually with buckets of hot water from my sink to get enough water in there to cover the fabric. Its just ridiculous that I even have to consider how to outsmart my washer!4. Smelly clothes. Seriously. I do the obligatory monthly Affresh cleanings, and I have learned to leave the lid open after the last load of clothes so the tub can air dry. However, I still from time to time pull a load out of the tub and it smells like mildew. And dont think for one second that the smell will go away when dried. I have opened the dryer and pulled clothes out, smelled the mildew and put them right back in the washer for a 2nd go round. Nothing worse than putting on a clean nightgown and smelling like mildew! Ewe!! With this awful washer you can NEVER leave a load of washed clothing sit for any length of time or you can look forward to smelly clothing. Hate it. Absolutely HATE it. Again, this defeats the purpose of using less water.Cant make myself spend more dollars that I dont have in the budget to replace this piece of crap. I have figured out all the workarounds for now, but as soon as I can replace it I will send it to the dump. Not going to resell or donate to anyone else as it would just be a burden for others. If there was ever a rightful need for a class action lawsuit to compensate consumers for false claims by a company - this is it! Hope this helps prevent anyone reading from making the poor purchase decision I have!

Bought a new Whirlpool range in 10/20. In 06/21 the control panel stopped working. Now they say the necessary part will not be available until 10/21! 5 months without a working range! Dont buy Whirlpool--shoddy products and terrible customer service.

I have Whirlpool fridge for a very long time since I own my house and for me is one of the best, is a great company and occasionally have to fix in a couple of times and afraid to buy another more modern and not last like this old fridge.

We bought a new Whirlpool side by side, model # WRS325FNAM00 in March 2014. In less than 48 hours, the freezer box was condensing and water was leaking on the bottom edge. The condensation got worse and worse. Five service calls later, Whirlpool replaced the freezer door--which took six weeks because it had to be manufactured.After the door was installed--no change. Whirlpool replaced the entire refrigerator in June. Guess what? The new one is doing exactly the same thing in exactly the same place. So far it has not gotten worse. Well see, we have only had it a week. But already the service rep has been out to the house and added the silicone gunk to the box in case there is a tiny air leak. Why would a brand new refrigerator have an air leak in the freezer box?

This Whirlpool Washer Mod # 4800XQ2 eats holes in all of my clothes, came from Lowes. I still have the sorry machine.

We bought the over-the-range Whirlpool microwave, model #WMH53520AH-1, about four years ago from Pacific Appliance Sales Kitchen and Home inside a Best Buy store in San Diego. The Magnetron and Diode have malfunctioned and been replaced. Now the plastic around the door is falling apart, cracking, and splitting. This is unacceptable, poor craftsmanship, and low quality for the price of this Whirlpool appliance. This needs to be reported to the company and properly addressed. Until then, were staying away from any Whirlpool related products. We also own Cabrio W/D. The washing machine has had problems from year one. Im submitting a separate review for this appliance. Consumer beware!

Whirlpool French Door Plus 3 drawers: This MSRP $3400 refrigerator has great features. Great ice makers. No issues up top. First 18 months were great. 4 repairs in the past 11 months. All freezer temp issues. We had noticed a number of ice sparkles forming on our unopened food. Frozen fruit was mushy. Temp usually read 0 degrees. One day I opened it and the temp was 40. Two hours later, it was close to 0. I started monitoring it closely. High temperatures occurred around noon. Zero degrees most of the time. After the third repair, service tech called Whirlpool and found part was redesigned. New part didn’t help. We understand the freezer has a heater in it, to defrost. The heater stays on too long. That explains why the freezer temp went as high as 50 degrees, while the fridge was perfect.I purchased this at Lowes. I always buy Lowes extended warranties. Thankfully, they bought back my 30 month old refrigerator. Kudos to Lowes warranty company. Never put on long holds. Fast response. I noticed the price for the warranty on refrigerators in this price range has increased by $100. Reflects a lot of repairs on refrigerator models. One thing though. I learned 3 repairs within a 30 day period is considered one repair, for purposes of their lemon policy. I will also add that the warranty company reimburses you 50% of the cost of filters. Simple process. I have read complaints that they make it too difficult to collect. That is just not true. Have been reimbursed $100 for filters to date. In 5 years, Even at the increased price, the savings will pay for the warranty. No brainer.

We have had this Cabrio washer/dryer pair for 8 years now. I didnt want to buy a front loader at the time since they were relatively new and was afraid to roll the dice. We saw the ads for this pair, the washer was the largest top loader at the time and didnt have the agitator (which I liked) so we bought them from Best Buy. I purchased the extended service plan (thank God) because we started having issues within the first month. First was the dryer, it was making a funny squeaking noise. We called to have it looked at and the tech said the drum was out of round. He ordered a new one and it showed up almost oblong. Returned it and got a second (same thing). We straightened it out and put it in. Two weeks later the control panel went out. Repaired it. Then the washer started. In the first 3 years of owning these we had called to repair the washer 4 times and the dryer 4 times. We could have got them replaced after the 5th call. Of course we had replaced all the faulty stuff and the pair settled down for 2 years.Now I have had to repair the washers control panel myself, the dryer sounds like it is coming apart and sometimes runs for hours, and now the washer cant wash in any cycle but delicate because the drum bangs around and cant self balance any more. What junk!!! I know people that have purchased low end machines and have had no issues for decades, maybe a random belt or something simple. I wouldnt buy another Whirlpool set if they were the last manufacturer on the planet. They should be ashamed that they didnt recall these things for all the problems they had.

My brand new top-loading, high efficiency washer has squealed like a banshee from day one. Whirlpool replaced the main agitator part, with no success. It still squeals so loud, you cant have a conversation in the same room. Now, Whirlpool says that it is normal. No, it is not normal for a washer to squeal so loud. I am still waiting on Whirlpool to replace the same part they replaced the last time. We are still not abe to hear each other over the squeal of our new Whirlpool washer. This is not normal.

On October 29, 2009, we bought a new Whirlpool 30 gallon gas hot water heater to replace a Rheem we had for 20 years. We immediately had problems with the relief valve leaking, so we ran at the local hardware store and bought another valve. Next, we had trouble lighting it (husband was a plumber years ago) but a call to the hotline and we were in business. Now just over 3 years later, the pilot light started to cut off at will. Troubleshooting solved nothing. We called the hotline again and were given a part number, an authorization number and told to go back to Lowes for a replacement part. Figuring how our luck runs, I called first and was told there was no such part number. Trip saved. Now after reading all of these reviews, we have decided to cut our losses and buy another Rheem. You can find the Whirlpool hot water heater sitting beside our 2-year-old Kenmore HE washing machine (also made by Whirlpool) on the garbage pile. No more Whirlpool!

Bought this refrigerator in June 2018. Had issues with freezer section and service technician came July 19. Issue was resolved but only temporarily. Had another technician come in Oct 3 and was told he had to order a new freezer drawer which should take 3 days. Now being told the drawer won’t arrive until Nov 15. You call that service? It would have taken less time to get a new refrigerator. I would never recommend buying Whirlpool products to anyone. What’s the point in buying a product that you can’t get proper service on.

Model CAE2745FQ0, Serial #C72680766 - Purchased this coin op clothes washer 2/2/2018 at Brandsmart, Deerfield Beach FL. Would not empty or spin correctly; 1st service call 2/28/2018. (Less than 30 days from purchase date). 3/21/2018 called Whirlpool again as same problem continues (as listed above). Washer is not being overloaded. Whirlpool repair visit scheduled again for 3/23/2018. This is the 2nd repair time since we purchased the washer on 2/28/2018. Purchased the same model 2 years ago, and experienced repeated problems to the point where we got rid of that machine and purchased the most current model referenced here. We are looking for a full refund of the purchase price as it appears that this recently purchased machine is on its way to be a repeat performance of the 1st machine that we got rid of (that was purchased 2 years ago). Again, we want the full purchase price refunded, which is $900.88. This machine is not even 2 months old. Thank you.

After only two and a half years, my Whirlpool bottom freezer refrigerator (GB2SHDXTQ0) was frosting over and the top food section stopped working altogether. I made a call to Lowe’s. It’s not their problem. I then called Whirlpool and he said I had a bad gasket. I had a 28-year-old refrigerator that was still working with the original gasket and it has no problem. After reading all the complaints with Whirlpool, I would never buy another one again. After cleaning out the refrigerator and freezer two times, carrying things to a friend’s house and having to pay $90 service calls just to walk into the door, I am ready to throw this one out. This refrigerator cost me $1200 and I am a single person living on $900 a month. Thanks for nothing, Whirlpool. There should be a class action suit.

Whirlpool Duet washer and dryers extremely silent and energy efficient. However the wash time can be reduced, it typically takes 40 mins for a full load to wash. The dryer filter lining is fragile and breaks quickly.

The refrigerator has worked OK except for occasional freezing towards the back. However the vegetable bins have both broken starting with various parts of the handles in front. We eventually replaced them. A brand new one arrive already broken. Same cheap brittle plastic. No alternative available. The company denies any problems or complaints about the bins. Feels like a small profit center for them.

We purchased a Whirlpool refrigerator on October 18, ‘11 in Viveks at Tambaram. Next day itself, 19th of October, 11, the door lock of the fridge is not working and the defrost light is also not working. Immediately we logged a complaint in Whirlpool customer care, which is in Chennai (mothers care). The engineer came and he removed the lock and he said, “Its a new model lock, we dont have any spare. We will raise an incident to Whirlpool and will replace with a week.” But almost one month over, today is the 21st of November, ‘11. We called the customer care office more than 10 times in this period, but we are not getting any response from them. Today, I spoke to one of the executive in the customer care Mr. R. and asked about the status. But he said we dont have that lock and he asked me the copy of the purchased bill of the refrigerator for replacing the unit. Really, its very poor customer service and I’m very much disappointed with Whirlpools product. We used Kelvinator for more than 11 years and we never had any problem. But with this Whirlpool product, within 2 days we faced these problems. Cooling coming out through the lock hole in the door of the refrigerator. Electricity consumption is more. No defrost happens automatically so far. Almost, it seems that the refrigerator may go down to critical condition. Request your intervention to resolve the issue as soon as possible.

This Cabrio washing machine is really frustrating....... It goes off balance all the time. It does not matter if you have a full load or partial load, I know it has a tendency to go off balance, so I try to put the clothes in evenly. BUT it doesnt matter, it goes off balance. When the washer is downstairs, it gets to be a pain. The lid lock is a pain also. If you forget to put something in the machine, you hit pause button then you have to wait forever until it unlocks, and wait forever to unlock when it goes off balance. When it doesnt go off balance, it washes everything just fine. But if I knew what I know now about it, I would have never bought it....... I would recommend a different washer and check the reviews, which I didnt do. :(

I originally brought this to the attention of Whirlpool on February 27, 2014, and they chose to ignore the matter I raised. I am appalled at their customer service, but then again, customer service has been dead in America for decades now. I purchased a KitchenaAid (Architect Series II, Model KERS807SSS02, Ser. XW4704146) oven in 2009, which included a 5-year extended warranty. The first time I had to use my extended warranty was the first time a pot overboiled and thus overflowed covering the top of my range. Since then, Ive had to have my oven serviced two other times, but resulting from a pot which overflowed on the range.The controls are located in the front, directly below the stove top. There is most definitively a flaw in the design of the model I purchased. It seems quite obvious to me that the design should have included protection from moisture reaching the controls. It is very common for pots to overboil, from time to time, and thus overflow, but this should not cause the controls to malfunction due to seepage. Had I purchased the model that had controls behind the range and controls above the cooking surface, moisture would never reach the controls when a pot overflows. It should not cost hundreds of dollars each time a pot overflows on a range. Had I known that the oven model I purchased had a design flaw that allows moisture to reach the computer controls of the oven, I would have purchased the oven with the controls above the cooking surface.I invested over $2K on this oven because having owned KitchenAid appliances in the past, the KitchenAid brand had historically proven reliable. KitchenAid (or now Whirlpool) can no longer take pride in the quality of their products, most likely relative to the loss of manufacturing jobs in the U.S. Whirlpool ignored me the first time I contacted them on this matter and most recently today when I was told that it was a use matter. Apparently they believe that an overflowed pot is not a common occurrence on a range. I wrote directly to Jeff Fettig, CEO of Whirlpool and he has chosen to ignore me.

These washers are known to rust terribly from underneath the bleach dispenser. Please note that if not detected within the 1st twelve months from purchase, then Whirlpool will not stand behind their product. I would highly recommend not purchasing the Cabrio top load washer. Extremely dissatisfied with this product and warranty.

We purchased a Whirlpool oven a year and a half ago. Today the interior glass exploded while cooking frozen French fries. Whirlpool customer service indicates that this is unusual. Whirlpool indicated that the only way they will repair it is if we pay $375. We declined to pay an additional cost for this product which failed to function safely. In a quick Google search, it appears that the oven glass fails more frequently than represented by Whirlpool. We are disappointed in this product and the companys customer support and lack willingness to correct a product safety issue.

Shortly after the warranty expired my refrigerator started building ice on the floor of the freezer. With the build-up of ice the freezer started leaking on the bottom. Sometimes it gets so bad I have a hard time closing the freezer door properly. The Model# GB9FHDXWS06, Serial# K31505096 of my Whirlpool refrigerator. I do not recommend any Whirlpool product. Do your research before you buy any Whirlpool product.

My Whirlpool range, was purchased 14 years ago. It was fine until 2 months ago. I was preparing a meal for a dinner party and the oven went from low baking into Clean mode. (This cant be done by accident, it is many step process to go into clean mode) Locking the door! When I realized what was happening I immediately turned the breaker off but we still could not open the range door. Since the oven had my potato casserole and my Teflon coated cookie sheets inside it started to emit a toxic smell choking all of us inside the house. The unit was too hot to touch so my husband and brother-in-law finally donned gloves and got the range outside. I called Whirlpool the next morning and got the run around as to what type of range it was Kenmore/Whirlpool. Whirlpool finally sent someone out to look at the range and their determination was it caught on fire and melted! The company will not do anything about the unit or all the damage it cause because the range is over 10 years old. But they did not tell me this until I had spent weeks getting estimates and gathering information for them. I TOLD THEM DURING THE INITIAL CALL THE RANGE WAS 14 YEARS OLD. I TOLD THEM THE EXACT DATE IT WAS PURCHASED. Whirlpool sent me a letter from their Claims Resolution Department saying my DISHWASHER will not be covered and misspelling my last name. I have tried to call the person ** at least 25 times and she never answers the phone, only get her voicemail. I just wanted to tell them I was a little concerned about their accuracy with the typing of the name and product..... How complete could the investigation have been if they didnt even get the product correct.The smoke/smell ruined my microwave and ceiling fan. We had to paint the ceiling, redo wallpaper and professionally clean all the carpets and drapes on my first floor (we had just remodeled our kitchen last May so this was an expensive redo not in the budget. Not to mention the cost of a new range). I will NEVER buy a Whirlpool again. And I want to spread the word about the possibility of your range having the same problem.

Absolute garbage!!! French door refrig/bottom freezer. Too much to go into. This is by far the worst product that I have EVER purchased in my life. If I was strong enough to lift this piece of ** over my head I would carry it into the corporate headquarters of these money grabbing dirt balls and throw it through the CEOs door. Amend that: I would locate customer service and consider them bowling pins. What a bummer; how far we have fallen!!!

I purchased a new gas water heater from Lowes and paid a plumber to install it. I have been having problems with it staying lit. Once I noticed the issue, I notified my plumber and the plumber was aware of this on-going issue with these water heaters. The plumber told me to call Whirlpool and have them send me a new thermocouple. Ive been putting it off until now, but realized today over the phone with Whirlpool Customer Service that the problem is with the vent. The manual that came with the water heater has a horizontal venting installation, yet Whirlpool claims that it should be vented through to the roof and they sent me, via email, the correct manual. When I asked Whirlpool how the plumber was supposed to know, she said that he should have known that it was not the correct manual (even though there is no model number written anywhere in the instructions manual) and that we should call to make sure that we have the right manual before installing my next product. So, I need to double check every purchase I make! Or is this only with Whirlpool products? After speaking with two different Whirlpool reps, I have concluded that I need to purchase a new water heater, but believe me, it will not be another Whirlpool!

This dishwasher (model #WDT710PAYM5) leaked water after having it for 9 months. Service man came out to look at it and said it wasnt level. The very next day when I use it the water came out again on my wooden floor. Now the wood floor looks like it has water damage. Sadly this floor was just installed.

The fridge had been leaking just a little for a while until the leak picked up and left a puddle. Turns out this plastic tube connector cracked. Seems a very poorly designed fit that caused the bend in the plastic to rupture. Now the whole tube and what I think is the water inlet valve will need to be replaced.

We purchased our oven on 12/06/15. I have called and complained about the AquaLift oven on more than one occasion. This technology does not work. I would have thought that there would have FINALLY been a recall on this oven. I am a senior who thought this stove would last me for the rest of my life. I have to stand on my head to try to clean it. NEVER, NEVER, NEVER would I have purchased this if I had read any of the reviews. Buyer beware!!!

Buyers beware! I have had the Cabrio top loader washing machine for less than 18 months and it is already giving me problems. During the wash cycle, it sounds as though the gears are grinding to the point it wakes my family up two floors up! The spin cycle is a joke. The washer sounds as though it is going to spin off into another room! When I called Whirlpool, they told me to shut the circuit breaker. That might reset the computer. No go which I figured as much. I have had washers that lasted 10 plus years with no problems. It is not worth your time or your money. Never again, Whirlpool!

Whirlpool Refrigerator Freezer WRF560SEYB01. Purchased the Whirlpool Refrigerator Freezer in 2012 at Sears. Ran okay for 2 years. Bottom freezer door came off the track. Called Sears. Sent out repairman for $200 to replace the door. He did not check the ice buildup on back of freezer. Next problem, severe ice buildup, loud noise. Used hair dryer to melt ice and took the blower fan out of freezer. Solid ice on all the blowing fans and found a chunk of solid ice. Freezer no longer made the noise until the ice built up again. Now, it continues to build up and we have to use the hair dryer every two weeks. A refrigerator should last at least 10 years. This model doesnt even warrant a rating of any kind.

I have had the washer for 3 years now and it started to make a loud noise during spin cycle. I made a service call and found out the bearings are damaged. Something that cost this much money should last a lot longer. I have researched on the internet and found this to be the problem for a lot of consumers and would like to see something happen.

We got a french door Whirlpool refrigerator about 15 months ago. Model Wrf757sdem01. There were problems from day one. Serviced about 6 times by 3 different companies... Died again less than 2 weeks ago. Finally the store decided to replace it. Was under an extended warranty. We have been without a fridge for over 10 days. It has caused multiple problems for us as we are out in the country. We have to haul ice to 4 coolers... Wait on the new one (a Whirlpool). Plumber had to be called in and he has had 3 of this same model replaced! Years ago you could trust Whirlpool. Now apparently not. I hope we do not have to regret our replacement one which still is not installed! By the way the water filters have to be replaced to the tune of 100.00 a year. We are not going to use an icemaker or get water from the new one.

Most dissatisfying experience with Whirlpool. In 2013 I bought a stackable Whirlpool washer and dryer. Everything worked well for two months, and then the washer started having problems. The washer memory board unit (MBU) needed to be replaced. This was done under warranty. One and half years later I started getting the error F07 which means an electrical problem. I called Whirlpool and they told me a technician would cost $85 for a service call. I delayed the call until today.The technician came, did a diagnostic and then advised me that I would need a new MBU. The cost plus labour amounts to almost the cost of a brand new washer. To add insult to injury, Whirlpool advised the service call would cost $89. (They upped the price since my last call.) You can imagine my shock when the technician told me that the $89 covers the first 15 minutes. I paid $133.34 for one half hour diagnostic testing and to be told I need a new MBU which is on back order for at least 6 months!!! My recommendation is - NEVER BUY any Whirlpool product ever.

After seven long years of one issue after another, about once a year replacing one part after another, draining the unit to replace parts, waking up to cold water, I finally gave up and replaced this Whirlpool water heater, model model # FD1H4040T3ENOV unit. Never to buy a Whirlpool unit again. Thanks for the memories.

Bought a new Cabrio, worked ok but in less than 2 yrs the bearing is bad. It will cost almost as much to repair as a new washer. Will never buy a Whirlpool product again. Would give negative rate!

The washer has rust under the rim in the inside - also the paint is bubbling and peeling under the rim of the washer. I contacted Whirlpool and was told that is a cosmetic problem. There is no warranty for rust or peeling paint. I will never buy another Whirlpool washer. I paid over $700.00 for this washer and I dont think I should have a rust problem after 5 years.

In May 2010, I purchased a Whirlpool WFW9750WW front load washing machine. In October 2010, the machine started making a strange noise and by December 2010, the machine sounded like a jet airplane. I called Whirlpool warranty and they sent out the appliance doctor. They looked at it and said that the bearings were shot and needed an inner basket, outer basket and one other item. They would order it and come back in a week or so. We were told not to use our machine. Ten days later, I called to check repair status and they said that the items were on back order until late January. I called Whirlpool and after several conversations and going to the second level of supervisor over a week time frame, they finally located the part and shipped it. However, it was not until the end of January 2011 (seven weeks after my call for service) that the part arrived and was installed. The sound was never right after the repair. The appliance doctor came out and told me that all washers are loud. In December 2011, the jet airplane sound returned. I called Whirlpool but I was now out of warranty. Luckily, I bought the extended warranty through Lowes. They sent out Night Owl on February 9th 2012. They diagnosed the same problem with the bearings and said they would order the parts. I called Night Owl on February 17th to check on status and they said that the parts were ordered. I called to check status again today and now the parts are on back order (same as last time) until sometime in March. Night Owl turned claim over to check on getting the machine replaced rather than repaired. I was told that this would be another five days. Its amazing how there are no parts available. I was told the repair cost for this item is over $450 as it takes two repairmen about two to three hours to complete. Issue is still not resolved. I highly recommend not buying a similar washing machine. Whirlpools product, warranty and customer service suck.

We purchased a new Whirlpool in June 2017. About 3 months ago it began making foul tasting ice cubes and now they are so bad we cannot use them. Called Whirlpool for help solving the problem and they basically told me there was no fix. It was my bad water. My water is wonderfully pure and good tasting. It only is bad from the ice in, what I consider a new fridge. They did want to make an appointment for a tech to come out and check it. I dont know why when they told me it cannot be fixed. So sorry we bought a Whirlpool and will never buy any of their products again. Hopefully this will help someone else.

We bought the washer and dryer set almost three years ago. Great sales pitch! Energy saver, extra capacity, low water usage, Whirlpool name and I thought we were getting great quality! Three years later I am disgusted, disappointed and am junking the washer. The dryer has a new heating element that we proudly fixed ourselves after the repairmen told us that these were meant to be throwaways. We just thought he did not want to work on it. After watching several YouTube videos we had it apart and found the issue was a cracked heating element. We ordered a new one for 100$ and spent another 4 hours putting it back together. If we had to pay a repairmen to do all that the bill would have been the price of a cheap new one. Fast forward three weeks and now the washer quit and it can be one of at least 15 problems. After reading all these reviews we have decided to toss it as junk. It took forever to was a load of clothes negating any energy saving! Whirlpool should be ashamed of themselves for ripping off all of us hardworking Americans selling us junk. At one time the Whirlpool name meant you could count on a quality product! If Whirlpool really wanted to do the right thing, they would stop selling these immediately and give customers a credit toward the purchase of new washers and dryers!

Whirlpool Calibri washing machine - I have the washer for 4 years and have replaced four computer boards to the tune of nearly $300 each. When Whirlpool was told of my experience, they said they were sorry. Obviously, I am too and will not buy again. You would think they would give me one board at no cost, but I guess words are cheap.

We bought the Whirlpool Gold Stainless Steel dishwasher around 4 years ago and the pump and motor assembly went out. We spent top dollar on this dishwasher and should of lasted a lot longer. I’m no longer going to buy anything Whirlpool makes.

I purchased a Whirlpool gas top range from Lowes in Somerset Ky September 2013. Model number WFG524SLAB1. The surface is showing bubbles. I contacted Whirlpool and they gave some kind of story. In other words I am stuck with it. Still under warranty but they wont send someone out to look at it. Lowes told us that it could be a paint defect when it was made. If the top starts peeling, it will be a real mess. I have never used anything abrasive on the stove top. As of right now I am not happy with Whirlpool at all and if they dont do something about this, I will never buy another one of their appliances.

We bought our washer in on 2011. Within a few months, the washers behind the screws on the top began to rust. Now less than two years after purchasing this high efficiency and expensive washer, not only are all the washers rusted on the plastic lid but behind the the lid and the side of the washer is rusted. Very disappointed and recommend that you do not purchase this machine.

We bought a Whirlpool dishwasher when we learned that my daughter and two children would be living with us for an extended time. We bought it a couple of months before they came. During that time I used it maybe four or five times as there are only two of us and didnt need to use it. Since they arrived in early June, the dishwasher malfunctioned almost immediately. Talking with their representative was useless and frustrating. The only words she seemed to know were circuit breaker. That is where the conversation started and ended despite my assurances that it had nothing to do with a circuit breaker. We wrangled round and round to no avail. This company used to be an American standard. Now it is a class A maker of junk.

I have a Whirlpool dishwasher that is under warranty. The dishwasher failed and Whirlpool service gave me a written report acknowledging their part had failed. It caused $20,000 worth of documented damage. Their adjuster came out after waiting for one month. I have a claim with them and no one contacts me. For a few weeks I was dealing with their legal dept and they said they were going to turn it over to the company that made the defect part. To which I advised them Whirlpool did the damage, I will deal only with them. Since then their legal dept has not answered one email. Whirlpool is trying to put the damage on another company rather than themselves. I have heard from NO ONE. I bought a Whirlpool dishwasher and their tech and their adjuster confirm the damage. Now here I sit one month later, cabinets destroyed, floor destroyed and garage ceiling as well as kitchen walls destroyed and at one point Whirlpool says maybe you should put it through your homeowners, they would pay you faster. I say Whirlpool dishwasher did the damage, Whirlpool should pay. WHIRLPOOL BUYER BEWARE!!!!! ANY QUESTIONS YOU MAY CONTACT ME AT **.

We bought a new Whirlpool Cabrio washer and dryer in January of 2012. We were setting ourselves up for retirement in a couple of years. Worst mistake ever! It cant get clothes clean especially dark colors. I wash my blacks at least twice, sometimes as often as 4 times just to get the detergent streaks out- simply rinsing a second time doesnt do the job. I guess I should be grateful that we have not needed to call a repairman. This is so disappointing as our last Whirlpool washer and dryer were over 25 years old???

Just like so many on this site Bought Whirlpool Model #WRF990SLAM02 refrigerator new in 7/2013. Just went on vacation for 2 weeks, I come back and the freezer and ice maker are not working. If what everyone on here are saying is true then it looks like I too will have to purchase a new refrigerator and you can bet it wont be a Whirlpool.

I love my glass top stove and glad I purchased it, so much easier to clean, I think they should all be made self-clean on any stove, I did not notice that some dont come with it and some dont. Remember not to start cleaning the top of the stove until you can touch it with your hand.

Within 5 months my 850$ dishwasher broke. 2 months to repair and 15 plus hours on the phone. Warranty is cryptic. You must allow them 30 business days from when they order parts. Buy Bosch, wish I did!

I purchase a suite of Whirlpool Kitchen Appliances April 2017. My range is the slide in model. The knobs are on the front of the stove top. I 4 months in I saw that the paint behind the plastic panel where the knobs are was chipping. Also, the gasket in the oven had some loose threads so I finally decided to call the warranty. Whirlpool paid for the gasket to be replaced but Customer service said the chipping was cosmetic and that only covered for 30 days. I am so disappointed in this range and Whirlpool. My stove looks very used after 10 months. I followed the instructions on what to clean it with and how to clean so I know its not me. The paint chipping is crazy! How as consumers do we deal with this? This Range was a cost over $2000! and they give me touch-up paint!I purchased Whirlpool because I researched prior to purchasing my appliances. I thought I was buying Quality, this is not quality! At Christmas I had a pot of potatoes boil over and the element circle on the glass top cam off with cleaning. This too is not covered because its cosmetic. Ironically, my old glass top Whirlpool range did the same thing. That why I got a new one! I guess it still works. Who cares how it looks... RIGHT? Well, I WAS a good Whirlpool customer. Not anymore! Do not purchase Whirlpool glass top ranges unless you want it to look worn out after less than one year. I have tried to post pictures but this wont let me paste them!

Whirlpool Cabrio. A little noisy, 2 or 3 years, do exactly what the manufacturer says they will do. Start them up, run them, go get the finished product... The previous set, same brand lasted us 15 years and then went on to help someone else. Still have the same dishwasher, Whirlpool, 11 years, no repairs, no breakdowns. Bought refrigerator, and micro-wave also, several years back. No problems, no service calls, no stops.

I have a Whirlpool built-in double oven. It is 7 years old. The top oven has overheated 3 times with food in it and it locks the door. The oven beeps and says, Too hot, and locks the door. Luckily I was in the kitchen when it overheated, so I could turn the oven off. After turning the oven off, the oven has to cool off before the door will unlock and the food can be taken out. By then, the food is really burnt.I called Whirlpool to see if there is a recall and they said, No recall, and the oven was out of warranty. So I called the repair shop. They said it was the control board and they were not sure they could get a new control board. I may have to find someone that can rebuild this control board. They said not to use the oven. It could cause a fire. I would think that they should recall these ovens. They should have a safety switch that shuts the oven off if it overheats like mine has done.

I purchase December 2019, I had my previous stove for 20 years and wanted a new fresh look. I purchased the stove during a Black Friday sale. Started having problems with the door not closing. Customer service hold time took days and hours of hold time. Took 3 weeks to repair. Now seeing and hearing sparking and its week before Thanksgiving NO STOVE AT ALL. DONT BUY!!!! What happens when warranty is over????

The refrigerator is a Whirlpool Model #GSC25C6EYW0. We purchased it on September 17, 2013. So far we had to fix the ice maker, the drawer broke, the refrigerator cools unevenly. They tried to fix it but cant. Therefore, I cannot put tall things on the top shelf. Now it is not cooling and I have to repair or replace it.

I bought this washing machine after having my Kenmore for 20 years. This washing machine is a nightmare. I have to wash my clothes 2 or 3 times, to get them clean. Everything has residue on them. Once a month, I do use a cleaning tablet, and between loads, I wipe the washer out too! This is the biggest piece of junk! Save your money. Buy an old school washing machine.

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

I had this washer (WTW7990XGO) 5 years and finally had to replace it. It started with the touchscreen. No matter how often it was calibrated it was very frustrating to get it to respond. It would start dinging and going thru all the cycles at random times. Then there was the error code for the door lock. The door lock wasnt the problem, the surround was slightly warped and the door wasnt catching. Warped Im sure from having to literally climb into the machine to retrieve the clothes! Then a few months later it was another error code - the machine wasnt draining fast enough. It didnt drain at all. We had to use a water hose to drain it. After the second time with that, I went and bought a new washer - different brand, dials - no touch screen, and it has an agitator. Unfortunately, I ran into other customers in the appliance department who were having the same issues from 2 other brands of electronic washers. We all went back to as old school as was available.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

Water filtration unit was leaking only when someone got water. It pooled into the bottom of fridge and ran out under the fridge and because of the slope of the floor was running back towards the wall. We didnt notice until our laminate wood flooring was starting to swell up. It was probably leaking since the day we bought fridge brand new, but took us 4 months to notice. Whirlpool said they will not fix our flooring, only the fridge. We had to make a homeowners claim which we did. When the contractor moved the fridge back after replacing all flooring it starting leaking from the ice maker unit. Only when the ice tray filled it would gush out water. Our flooring is now ruined a 2nd time and Whirlpool will not fix the floor. Repairman said that Whirlpool used rigid parts in the water and ice maker units and tons of people are having the same problem. Since there is no flexibility in these parts they break when the fridge is moved. Whirlpool sucks and I am fighting with them and Lowes to get this fridge replaced with a non Whirlpool appliance. I will never buy Whirlpool again.

I thought the new AquaLift cleaning would be the greatest. Boy, was I disappointed -- no thoroughly disgusted and very angry -- when I tried to use the self cleaning oven. I had cooked a prime rib roast and a lot of grease had spattered inside the oven. I wiped away the excess and did a cleaning cycle -- what a joke! There was still grease running down the door and walls. Nothing was changed after two cleaning cycles. Now I have to crawl inside the oven and scrub it manually. I was always pleased with the old self cleaning ovens which only left some ash and a little bit to clean up. The AquaLift technology doesnt work at all, didnt Whirlpool test it prior to selling it to the public? They will surely lose my business and I hope a lot of other peoples business as well. This technology was a huge mistake!!

Purchased Model # wtw5000DW0 Jan 3, 2015. Aug 15, 2015 started leaking water. Certified technician came to repair. Aug 17 - new transmission. Sept 3 replaced new transmission with another new transmission. Sept 8 called master technician at Whirlpool, needs new clutch assembly. Both technicians stated they dont know what is wrong with the machine. Sept 10 new clutch assembly and agitator replaced. The machine still makes a horrible grinding noise and is unusable. The technician has replaced everything but Whirlpool says it is still fixable. The Master technician has no idea what is wrong with my machine yet he refuses to call it broken. I have been without a washing machine for 3 1/2 weeks. They refuse to offer a return authorization number. I have spoken to a Supervisor on the phone. She states the warranty is for repair. They wont admit their product is a piece of garbage. They have lost a customer. She stated she will put my complaint in a file.

We purchased a Cabrio top loading washer WTW6400SW2 and 2 Cabrio Dryers WGD6200SW1 (one for our cabin) in 2007. Since day one the washer tied clothes in knots, never cleaned the clothes properly, and went out of balance several times each load. We purchased from Best Buy who did their best to service the dryer (black, rusted vents replaced inside dryer). But as for the washing machine, we were told there was nothing they could do. The repairmen stated Whirlpool was aware of this issue and doing nothing. When I called Whirlpool, they said no repairs were logged for the washer. No, of course not. The repairmen said there was nothing they could do! This went on and on until our machines went out of warranty. Now Whirlpool happily tells us with glee in their voice that its out of warranty and there is nothing they can do. They know there is nothing they can do. The design is faulty! The line needs to be pulled out of manufacturing! Whirlpool did say they would log a customer complaint on the design. Right. Im sure they dont have any of those yet. Whirlpool is defrauding the consumer with products they know are defective. Please people, do not purchase any Whirlpool products. Put them out of business where they belong.

I Bought the Whirlpool Duet Steam Mod#: WFW95HEDC0 in 2015. I have always wondered how a machine can get clothes clean with less water but liked the idea of the energy star and saving water. However, I found that I was right and the clothes do not get very clean. They do not even get all wet hence the dry feeling when they are done. I just recently got a little frustrated at having to rewash some things by hand afterwards. I started to pretreat and wash out stains by hand beforehand. That helped some. I finally stopped the machine after all the water was done filling it and it tumbled a bit. It looked like it was wet from the window but when I dug through the clothes I pulled out a t-shirt that was almost bone dry. Some of the other thicker clothes like jeans etc. had a lot of dry spots too. This is why the odors don’t come out and why spots and lines are left where the dry meets the wet. There just isn’t enough water get all the material wet. I then proceeded to pour a pail of water in to get all the clothes wet. When I started it back up, it drained some of the water and I still had the problem. So now I get all the clothes wet in the sink before I put them in the washer. It’s amazing how clean they got and they didn’t have the body odors either. I think this machine would be fine if it could be reprogrammed to add more water for cycles. I know that would change the “Energy Star” but this water saving idea is bogus if we have to rewash and add more water to the cycles. At this point I will be looking for a new machine that doesn’t have the energy star but allows me to adjust the water myself. I do not trust these machines anymore.

The gas water heater that we purchased has been a headache. Pilot went out several times. When we contacted Customer service they informed us that we would have to have a new kit put on it. We ordered that and it worked a while and then we started having the same problem. Just recently we had to purchase another part and once again we have cold water. Fed up.

WFW97HEDW, WGD95HEDW American made and equivalent to LG and Kenmore. Size fitted our space available. Price was a bit higher than the Korean models with similar or better features. We bought and returned three consecutive Whirlpool models from Sears. Though we never really got to put the dryers to the test, nor did they fail, the washers were of such a poor quality that they broke down within 1-2 weeks of installation. Eventually we switched to LG and have had no problems. When the Whirlpool fails it locks your clothes inside and to open and retrieve your clothes is just short of impossible. We really, really really wanted to buy the American made brand and we were willing to pay the premium to do so, but these washers were awful.

Whirlpool Duet - they are highly rated and are aesthetically pleasing. Highly rated, they are expensive, my last Duet w/d didnt last as long as expected. Ive had to repair both machines once since I purchased them. Good quality is of utmost importance, plenty of washing and drying options, front loading washing machine, full size extra large capacity, attractive machines, good reputation for quality and lack of repairs.

We had purchased Whirlpool Side Kick Refrigerator/Freezer 8 years ago for our new home and had custom cabinetry built to fit around them. Once we moved in we were CONSTANTLY calling for repairs on one or the other. They fix it then the other goes out. They fix it then the other goes out. After 7 years of this we finally said, lets get a new set. We bought the same product because once again the cabinetry is built around these. We were 8 months into having new ones and the refrigerator went out. They came out to repair it. That is a joke in itself because you dont have much to choose from since its under warranty and they dont have anyone in the area to come out. Finally when they come out and fix it now our freezer is out and a repairman is due to come out tomorrow. We WILL NOT buy ANY product of Whirlpool and DO NOT recommend their products!!! VERY unhappy especially since these purchased together are well over $3000+!!!

Just bought the Whirlpool 3.5 cu ft, Top Load HE washer (model WTW4815EW), but of course, the sales person did not explain that HE meant LOW WATER USAGE. Wish I had done my homework. FIRST LOAD, clothes seem to be beaten to death, and must pour in detergent before you load clothes. So, Oxyclean detergent I always used in my regular (NOT HE) washer put a hole in one towel and discolored (faded out) the others. Also seems that the fast and hard agitator would not (logically) last very long. It seems to be working very hard. Im SO disappointed. Called Whirlpool to say I dont like it. They said to call Home Depot and see what they will do about an exchange. When I did, my sales person said that almost all the washers he sells are HE. I want the old type washer back that allows me to add more water if I want, change the cycle and water levels at my discretion, add detergent when I want to, and soak clothes if I wish.

Whirlpool Duet pair. Like Whirlpool products and have had good experience with them. Have had the pair for 3 years. Like the way they wash and dry. Clothes do not take a beating. Only dislike is the vibration on the washer. I look for capacity and extra features such as: steam option and extra cycles. Now I also look for noise and vibration. Would definitely like to stay with Whirlpool. Definately cost is important, but for the sake of a few dollars more the options and the brand are something to be considered. Having a steam cycle and wrinkle cycle are important in any dryer.

I owned the Whirlpool washer for 13 months until it quit. Menards was no help with anything. I am going tomorrow to get to try my luck with Samsung.

It has needed a new motor, new tub assembly, and about six other repairs. Now the heavy duty tub just thumps around and I get an uneven load message, even when running empty. It is the worst single machine I have ever purchased, with the possible exception of the Whirlpool matching dryer, which lasted about three years.

I bought the WP Cabrio washer on 10-18-16 from Lowes. It does not wash well, my dark clothing came out with white spots all over them even after I rewashed them x 3 and the lighter clothing you dont see the spots so you are wearing dirty clothes. Also, it is making a lot of noises while running. WP should pull this model off the market.

Aqualift cleaning does not work. I am old with bad knees and do not need an oven that has to be cleaned manually. This technology is a joke and everyone who bought one should be reimbursed. One reviewer indicated that there should be a class action lawsuit for this situation. I agree!

We have had the washing machine about four months. When washing sheets, they twist up badly. The machine does not seem to get the clothes very clean. It seems that it does better when we put it on the bulky setting for all washing that we do. More water is needed I guess.

Bought a Whirlpool Refrigerator Gold Series on 11/04/2014. It stop working on 6/25/2014 when I called customer service to report the problem. Received the visit of 2 serviceman on 3 different occasions and still dont know when the refrigerator will be fixed. What should I do?

Bought this Whirlpool washer (WTW5000DW0) to save energy and water consumption. It has been awful from day 1. Clothes come out with detergent (white marks) all over them. Clothes aren’t spun out enough to dry them. It takes FOREVER for a load to finish, I can’t imagine that this is saving me anything on electric. Waste of money. Do not buy this!

I have spent 30 minutes trying to change light bulb under the oven and get the cover plate back on. I watched the film on how to do it, it was amusing to watch the struggle to get it on. It was amusing to say the least. Whirlpool watching it??? I do not believe whoever designed this worthless time consuming light cover never tested it one time, or it would had been more user friendly. It amazes me what kind of trash they can build for us consumers to have to deal with at times. Tomorrow this overhead piece of junk is coming out and being replaced by a non Whirlpool one. I am going to get a tractor and smash it into little pieces and put on side of street with a note saying this is what happens when you try for an hour to change the bulb.

2016 Cabrio Washer - I had an 11 year old Maytag washer that finally gave up so rather than go through the repair I decided to upgrade to a new washer dryer and went with the Whirlpool Cabrio W/D pair. I am shocked at the washers inability to clean even the most basic of stains. I have to pre-treat clothes like never before, have tried every type of wash cycle offered and cant believe the amount of time it takes to clean clothes. Over one hour??? My Maytag may have agitated the heck out of a load but in less than 30 minutes everything was clean. Ive had to re-wash load after load of the most basic everyday stains. I was hoping the larger drum would allow me to cut my laundry time down but that is not the case, and find myself putting a few things in at a time so they get washed. Im stuck with this piece of crap and have only had it for one month... Cant wait for it to start breaking down and dealing with repairs as so many of these comments mention. I miss my Maytag!!!

Purchased a Whirlpool Cabrio 4 years ago. It worked fine until last October when I had to call a Repair Service as all the Digital Controls would not work. It was the Digital Board had to be replaced at a cost of $ 315.00. That was October 2016 and in October of this year 2017 it started doing the same thing again. I call the Repair Service and they told me not to waste any more money on this machine as it is a piece of junk. I guess he was right as when I read all the bad reviews it got today, I realize I will be better off to buy another machine. It will not be a Whirlpool product. I purchased a Sears Kenmore Washer & Dryer back in 1995 and the washer lasted 20 years and I still have the dryer. This is what you refer to as a good product.

My dishwasher is very basic with no extra amenities, more features like an area on the rack that would wash the inside of small opening glasses and jars and I do not like the way my silverware holder just balances on the front of the bottom rack and does not attach to where it doesnt fall off every time its bumped.