The stove is okay except it scratches on its glass surface fairly easy with the non-stick pans. Also wished it had a self-cleaning oven. Its not the easiest to clean on the inside of the oven. The knobs are easy to use but its hard to navigate knobs to low to keep food warm rather than cooking at a low temperature. It has strong exhaust fan that really does its job.

I have had the Whirlpool washer for almost a year. It has multiple settings for different types of laundry, i.e. towels, bedding/bulky, colors. It is intuitive. My husband is able to put laundry in and is able to figure out which cycle to use. The tub is roomy and holds large items well. The dryer I just purchased in the last month or so. It matches my washer and so far I love it. It has very similar settings that match the washer. The lint filter is very effective, cleaning after each load is highly recommended. It dries quickly and is quiet.

I recently purchased a Whirlpool over the range microwave. I especially appreciate the unit's strong exhaust fan. My previous microwave's exhaust fan was much less powerful. The unit's black glass and chrome trim look great! I am extremely pleased with the new microwave.

I purchased this dishwasher (whirlpool WDF330PAHW2) in February 2019. Really worked great until May 2020. Now doesnt drain on the last cycle, smells bad (even though cleaned) and door leaks under handle on front. Really too bad. I have been a Whirlpool champion for 25 years. Now not so much.

We purchased a Whirlpool front loading washer about three years ago. During our first year the machine worked OK, but three months after warranty expiration (12 month warranty), the sensors seems to go wonky and it no longer worked (at 15 months of age). We paid about $95 in the Minneapolis area for a service call. The repairman had to call Whirlpool from our home to inquire about the sequence of flashing lights on the sensor. After getting off the phone he told us he thought he knew the problem, but could not guarantee that the $200+ part he suggested ordering would solve the problem. The installation would require additional labor charges, of course. I reported the incident to the manager of the repair service and was told the repairman was expert in Whirlpools but this did not further inspire confidence. We were not willing to sink this amount into the machine, so ditched it and bought a top-loading inexpensive Roeper. The top-loading machine definitely appears harder on the clothes than the front loading Whirlpool, but it gets the clothes cleaner and has been problem-free so far.

I recently purchased a new Whirlpool propane water heater. Dependable name, dependable product, years of trusted service, right?! We have bought many Whirlpool products over the years but never again. Got it home and installed it. It sounded like a plane taking off, and that was in the garage. Next came the lack of hot water. Mind you, we replaced a 40-gallon tank with a 40-gallon tank and the last one we had lasted 18 years without a problem.Well, same showers as usual, and we were turning up the heat mid-shower and again and again during the shower. Even turning up the heat on the water heater didnt relieve the problem. We are not happy with the product. And, no, there is nothing mechanically wrong with it; its just sub-par. Our water heater from 18 years ago worked more efficiently than this newer model. We called customer service, and we were told that unless there was something mechanically wrong with it, such as a defect, there was nothing we could do. There’s simply no recourse.Shame on Whirlpool for not making a quality product and standing behind it. This was a very expensive purchase - over $500.00. We thought we were buying a quality appliance. Very disappointed, and I will be returning it. I’m never buying another Whirlpool product again. I can only hope that the company we bought it from has a better customer service policy. Very frustrated and disappointed.

Owner of 20 apartments, 16 of them have electric water heaters and 4 have natural gas units. Have replaced over the years all 20 water heaters. 19 of them were replaced with Whirlpool units bought at our local Lowes. It is my opinion that they are very unreliable. The tanks rust out in NO time. The electric units last just a little better than the gas units but still terrible. Of the 4 gas units so far I have had to replace 3 of them and the longest one lasted 6 years and 7 months!! One of them was just over 6 years and the other was 9 days away from warranty expiring. They replaced that one. If you have no other choice make sure to buy extended warranty if available. They just dont last!!

Thank you Michael of Castleton, NY, for the posting about re-setting the microwave when it stops heating. Even if I have to do it once a month, it beats having to go out and get another one. And when that day inevitably arrives, guess which brand Im steering clear of?

I am making my last payment on this junk ** washer and I cant wait to leave this one at the curb! Like the other reviewers...this machine leaves white deodorant on dark shirts, sheet sets either constantly off balance or parts of them still dry after wash cycle is finished! I changed detergents several times thinking that was the issue...but the bottom line is the sell of having no agitator and water saving features leave you with dirty clothes and off balance crazy shaking nonsense! DO NOT BUY THIS MACHINE!

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

My daughter bought a mobile home manufactured by sunshine mobile home co. in Red Bay al. The home is only 6 mo. old. In that home there is a Whirlpool microwave oven model # WMH2175XVB-1 Serial # TRY 20 23398. After 2 months my daughter microwave stopped working, Whirlpool sent a repair man out to fix it. He didnt have the parts to repair it so he left to order some parts that he thought might be the problem. When the repairman returned two weeks later with the parts, he replaced a door switch. The oven started to work. About 4 days later it quit working again. The repairman returned for the third time, tried repairing the oven and was unable. I had to help him remove the oven so he could take it home with him so he could try to repair it. At that time I was so angry that the Whirlpool co. would send a repair man out three times to repair something that was obviously junk. When I talked to the people at Whirlpool they told me all they were authorized to do was repair it. I explained the repairman has tried three times and couldnt and that they in good faith replace the unit. The answer I received had to come from a mentally challenged person. If this is the response of Whirlpool about their product, then I want no part of them in the future.

Less than 1 year ago, I bought a washer and dryer. From the beginning, we have had a water problem and the water only comes cold... no warm water in the normal cycle. They came 6 times to service the machine and they cannot fix it. They said there is nothing is wrong with the machine but it does not wash with warm water in the normal wash cycle. I advise not to buy this product anymore. It is under a warranty so they should fix it or replace it. I am sick and tired of talking to them. They said if we send the service guy then I have to pay for it which is not acceptable because it is under a warranty. If anyone is thinking about buying this product, I advise not to get it and waste money on it.

Purchased gas water heater from Lowes in 2012. Had no problems until July 2018. Its under warranty but have had to replace the control valve completely and the burner 5 times and it still is not fixed. Dont waste your money. Buy something else.

My Whirlpool water heater had to be replaced. I got a new water heater, and filed a complaint against Chris from your company. Talked to Chris, and he requested for paperwork on the old warranty. I tried to send it through fax number 1 800 999 9210, but got no response. Chris, please reply with the fax number so I can send the info you requested

I am posting to help anyone else avoid the purchase of this machine! The lid has cracked and now warped into a position where it wont stay down. Obviously a washer will not work without being in the locked position, so we have to put several heavy things on top of it just to run a load of laundry. This is not what we expect out of a washer that we paid $900 for only two years ago!!!! We contacted Whirlpool and they offered to fix it for $350. REALLY??? I SHOULD NOT have to pour money into a washer this expensive after two years!!!! I am so disappointed in Whirlpool, this was the entire reason we purchased Whirlpool products, to avoid stress of broken appliances. We wanted reliability for our busy family and instead we bought into more stress.

Without being too critical, I would not recommend this washer for medium to large loads or for throw blankets. I have to wash throw blankets 2 to 3 times to get the entire blanket wet even on deep water cycle. I would not buy this washer again.

This Whirlpool washing machine is incredibly annoying and slow in everything it does. First off when you press the START button it takes 2-3 minutes before it decides to do anything, like maybe add water (except click, click and more click). If you have pressed the start button and you want to stop it to add something... again you have to wait almost 2-3 minutes before the lock is released and you can open the door. I am at 2 hrs and 15 minutes as I write this on the LIGHT WASH cycle with extra rinse and its still going. I have never seen anything like it. Cant imagine how long a HEAVY CYCLE takes. Cannot even try to measure the time. I put the load in and go to work and hope its complete when Im done 8 hrs later.We had a Maytag for 15 years with no issues (other than a drain hose cracked and had to be replaced) and it was time for a new one with a move to a new place. The sales associate convinced us this was the best machine at the time... Well what a mistake that was. There are no complaints about the actual washing. Everything comes out clean but I suppose taking that long I cant imagine why it wouldnt. I certainly cant recommend a Whirlpool washer to a friend, because I dread the thought of doing laundry at this point.

Like everyone else here, I had to call a repairman to have a look at my washing machine after 4 years of limited use (only my husband and I). As soon as the repairman looked at it, he told me theyve had so many calls for this particular washer. He ordered a new part for it, but it did not fix the problem. Thankfully we purchased extended warranty and we were credited the full amount + tax. Today I picked up a brand new Maytag washer. Cant wait to try it. Thanks Leons for the great service.

Standard looking dishwasher. Quiet and efficient. Best value for the money. Highly recommend. Chose this brand over more expensive options and made a great decision!!! I dont have a single complaint.

As a busy mom with 11 children, I needed a refrigerator that could stand up to the demands of my family. This refrigerator is great and meets my needs, but could use a few improvements. The side refrigerator shelves are not on very sturdy. When my daughter removed a jar of mustard, the shelf came off the door, fell onto the floor and broke. This could be solved by improving the gripping strength (increase depth) of the refrigerator door shelf holders. Additionally, the sliding freezer shelf is always crooked and has to be manipulated into place. This is most problematic when the freezer shelf is full. The freezer is not smudge-proof, but clean up is easy with a damp towel.

I bought my washer machine because my other one died on me. I was nearly everyday so I needed a dependable machine but also good price. This machine is both and I would definitely recommend Whirlpool.

Six months after purchasing my Whirlpool Washer model number WTW5000DW0 I would hear what sounded like rocks in the bottom of spin drum during spin cycles. Then noticed it was taking longer for clothes to wash and sometimes the water did not completely drain. Called for Service under LOWES warranty (the worst people to deal with). Tech comes removes a penny and dime and tells me that is the problem. Leaves. 45 minutes after he leaves there is the noise again. Call and set up for this Service Company to come back. Even though they went out of business prior to the appointment Lowes Service would not listen to me and insisted I stay home ALL DAY for someone who did not show up. Repeated calls to the Service Company resulted in nothing - phone disconnected.So finally after much frustration I am given new appointment with new Service Company - PARRISH. Tech comes in here five minutes and wants to know the sound, I explain. He checks out the unit and tells me it is a major problem and the part and labor will be costly. Best if they just replace the machine. His added comment - I see a lot of this. So if this machine is such a problem why was it not recalled? I am getting a replacement as I have warranty and machine was not a year old when problem started. Lowes Service Contract is another problem but I will deal with that later.

It does not clean as well as I would like. I have to wash the dishes before I put them in the dishwasher. It is also much too noisy for my liking. It has the pot wash and the dish wash. It has several types of cycles, long - short and it has a drying mode. My next dishwasher will be bigger so I do not have to run it every day. My next will be stainless. This particular dishwasher is nothing special but I have my eye on one with the buttons in the top of the door so nothing is visible on the surface. My dishwasher is getting older and I will replace it soon.

Love the size. We got the 28 cu ft with the drawer. I love the drawer for cold drinks and lunch meat, cheese, etc. Unlike previous refrigerators I never seem to run out of room. The bottom freezer has 2 drawers and is easy to organize.

I went from an HE front loader to an HE top loader (Whirlpool Cabrio WTW7000DW0) due to the risk of mildew with the front loader. Im not the only one doing laundry and if someone else does it, it always seems that they shut the door when empty, contributing to moisture and mold that needed to be cleaned out of the gaskets. I am so unhappy with my top loader HE washer. When I stop the machine and look, I always see my laundry half covered with dingy water, sometimes part of it still dry at the top and it is disgusting. I frequently have to rewash loads due to detergent getting trapped in folds or pockets created that hold on to dirt and lint, even being careful with the detergent amount. I run the washer now every time with settings of deep water, extra rinse, heavy load and presoak with instructions, with settings taped to the top for others.At almost 1 1/2 hours each load, we just cant keep up. The laundry still forms pockets and sheets form a giant tent over the entire load that has to be unraveled at the end of the cycle and wound so tight it had no chance of rinsing. I had to get a repair person out because it got out of balance and he had a small hand-held computer to enter a code to rebalance it. When we discussed the issues I was having, he was ready for everything I was doing wrong. He told me I can not wash blankets or large items (I thought I was buying large capacity with such an enormous drum). He told me they have caught people adding water with a bucket during cycles and that the washer software can tell them if people are trying to work around the system which voids the warranty.Apparently, this is a common complaint he blames on the government wanting high efficiency so they make the numbers look good, sacrificing the ability of the washer to perform at what a consumer expects. I have never seen the water in my drum higher than a couple inches and the drum is HUGE, but never used to capacity. He told me his wife demanded they get a commercial washer because she was so angry about how poorly it cleaned. I feel so scammed and I wish I could have my old agitator back. $100 for the repair call, $150 for the code to be put in and Im on warning that they will see if I try to add water, run out of balance or dont comply with any reason they can void the warranty by just checking the data the washer is collecting on us.

My experience w/ Whirlpool has been disastrous. Whatever you do read the reviews on products before purchasing, do your homework first before purchasing any major appliance. Whirlpool company and its employees are a joke. We are paying consumers and spent our hard earned dollars to support a company that could care less about us and our problems with their products they sell to us which are a piece of crap. I purchased a refrigerator made by Whirlpool from hhgregg in Oct 2015, which took 2 months to get it delivered. The refrigerator is not a year old yet, and cannot get anyone to come out to repair it. I have called Whirlpool numerous times, and so have my husband to come and repair a refrigerator that is less than a year old.The ice maker stopped working. Then I came home and discovered that the refrigerator is not cool, and everything in the bottom freezer had almost thawed out, and a repairman was supposed to come on August 31, 2016. It has been hot as Hades, during August, Sept, in the high 90s and they had the nerve to call and say they had to order the icemaker and when it came in someone would be out to fix it. I called the company in Maryland to find out what part did they order because a technician hadnt been out at this point to determine what part needed to be replaced. I called Whirlpool, and yes was put on hold for 45 minutes each time, and when I asked to speak to a manager, I was told that the manager said I could call a repairman and they would reimburse me up to $150.00. I replied That that is not my job. Your job is to send a repairman to fix it.The name of the company that they gave me and the phone number is located in Maryland, I live in the state of Virginia past Richmond, 3 hours away. Then I was told by the company in Maryland that they dont have technicians to Repair Whirlpool Refrigerators. This is totally unacceptable. It is Sept 19, and since August no one from Whirlpool has been out to fix it, neither have they tried to rectify the problem. Bottom Line, DO NOT BUY A WHIRLPOOL PRODUCT, not from hhgregg, Sears, Home Depot, Lowes, anywhere because this is how they treat customers. I have an 88 year old Aunt that lives with us that were responsible for, and she cant even get a glass of ice cold water from a brand new refrigerator thats still under warranty. Whats wrong with this picture?

I had an addition added to my home in 9/2007, which included a new bathroom. A whirlpool hot water tank was added. This week, I woke up to no hot water, so I called the whirlpool customer number regarding the warranty on the model FG1F4034T3NOV. T hey told me the serial number shows its out of warranty, although I may have only had it since 2007. They also said there was a screen that needed to be clean under the bottom of, it that if not clean, would make it stop working. Since homeowners where not cleaning it, they have made a replacement door part that would fix it, and do away with the problem, but I would have to pay $35 for it. I asked them, since the serial number shows that the part has not been replaced on this unit, why not just send it to me, and I pay to have it put on. The person said no, you will have to pay for it if I wanted the part to fix it . Although my builder did not give me the receipt for it, thats just not right. If a manufacturer knows they are having problems with their product, which require a part replacement, and they have produced one, they should be willing to give the part to everyone with the product that request it. On top of that, this model has the left hand threaded thermocouple, which no one around seems to carry. I am totally disappointed with Whirlpool, and right now would not consider buying, or have any more of their products installed into my home.

Im happy with my 9 year old purchase. They are front loaders and they sit too low for my comfort. The available pedestals cost hundreds of dollars for a pair...that I do not want to spend. I have not had any repairs needed.

I purchased a Whirlpool 3 years ago. It was on the lower end for price so my expectations were not that high. It does an average job cleaning dishes so for the price I could give it 4/5. The pump and motor just went and had to be replaced. Almost the same cost as replacing the whole machine. The repair technician that did the work stated that this was a very common problem with Whirlpool in recent years. Of course this is not covered by warranty. So if you purchase a Whirlpool realize you are rolling the dice.

My wife and I bought a Whirlpool water heater NU50T121-403, SER# 0733323 as we researched online the best efficient water heater for the money... which was actually more than we budgeted for. We purchased it from LOWES and our Plumber had to return the first heater due to a huge dent on the outside of the body once it was removed from the box. LOWES replaced it, no problem and he installed it. GREAT, HOT water for about six (6) months. Pilot light went out and has continued failing after relighting numerous times! Now we have the four (4) blinks indicating that the Honeywell gas control needs to be replaced only after 27 months of use. Whirlpool offers 12 year warranty on tank & parts, but come to find out, not this part. We were both raised on Whirlpool products and thought we based on our parents successes of various Whirlpool products, we were buying quality brand. We were soon disappointed and will never buy another Whirlpool manufactured Brand again!!

I purchased a Whirlpool fridge in September of 2015. In March of 2016 I noticed the Fridge portion was getting too cold. By April 2016 the freezer stopped freezing and fridge started warming up. I reported the issue to Whirlpool and made an appointment. The day of the appointment the first company called and their tech couldnt make it because of a family emergency. They sent another company out instead. That company diagnosed the issue as a faulty chiller and ordered the part and told me they would be in touch. A week goes by with no working fridge and I call them. They say it will be another week for the parts. Two weeks go by - no call. I call them and they say they have the parts and I make an appointment.The day of the appointment I call them to find out what time they will be out and they tell me they dont have all the parts. And when I mention that I have been without a fridge and that I am frustrated that they arent calling me and that I am having to call them back the lady starts yelling at me asking me if I want to cancel my appointment. So I call Whirlpool and ask for another company. They send a company out that is not trained to be working on a sealed unit. So I call Whirlpool back again and they send an in house tech out three days later. This is over about a month without a fridge at this point. Their tech simply recharges the system and says that it should be fine.A week later the freezer stops freezing and the fridge warms up to the point that both are not usable. The tech comes out and diagnoses that there it is most likely the chiller because of a build up of frost in the freezer. Orders the part and a week and a bit later I call Whirlpool up to get an ETA on the parts. They say they have the parts now (no call??) and they schedule an appointment. The tech comes out and puts the part in almost a week later (2 months now) and says that it is still building up frost in an area that it shouldnt and calls tech support back and forth for the next two hours. He leaves saying give it some time to see if it works, but admits to me that it is likely it is leaking in an area that he cant access.So I call up Whirlpool and explain the situation and ask for a new Fridge. It has been two months and the tech by his own admission could not say he fixed the problem and thought the problem maybe somewhere else. After looking at my case and me being on hold back and forth for about a half hour the supervisor says that at this time I need to wait to see if it fails again. And that if it does I need to have a tech back on site to verify. So this will be the seventh time I took time off work, it will be the fourth time the fridge fails and that I will have to throw out groceries. When is enough enough. I am into this now for almost double what the fridge is worth in lost wages and groceries.Do yourself a favour and stay away from Whirlpool!!! If I have to guess the following will happen: five days from now the fridge will stop working again (when the Freon leaks out - same timeline as previously) and then I have to call for a tech (3-4 days) and the tech will come out, determine that it isnt working. I have another conversation with a supervisor asking for a new fridge and they miraculously agree (yeah I know). Then what two weeks, a month... before I get a new fridge. I anticipate that I will have been without a fridge for 3 months before it is all resolved. Ridiculous is all I can say. Whirlpool should be embarrassed.

I have owned this Whirlpool Refrigerator French Door MODEL WRF990SLAM01 for less than 10 months. The ice machine broke down completely a few weeks ago. We called Whirlpool and they sent a repairman out the following week. He left saying he had to order parts. About 8 days later, they called to let me know they have the part in and scheduled a time to fix it. They put the new part on and said ice should be coming out in the next 72 hours. It never happened!! Not only did the ice maker stop working, the freezer stopped working which was about $300 worth of frozen meat/goods down the drain. I called the appliance repair guy. He said, I was worried about that, this product is known to have these issues. I asked, Does Whirlpool know? He replied, Absolutely, they have a kit to fix this but its not 100% guaranteed to fix this issue. REALLY?!!! I called Whirlpool and they could have cared less. There were no apologies, no type of compensation (exchange/replace). It is now going on day 22 and we still have no ice or freezer. This fridge cost me $2500 and four requested days off so I could wait for the repairman. Whirlpool, you as a company should be ashamed and outraged. You are more concerned about the bottom line of recalling these lemons and forgetting the impact you are having on us consumers. How many people are going through this issue that will not under any circumstance purchase a Whirlpool product again? I am so happy I am not investing in this company as this will impact this company in the future. They may be selling quite a few now to new homes/builders but when the word gets out what type of product they are selling and not repairing prior to the sale and knowingly letting people buy these, it leaves quite a bit of culpability on their hands. IF you are going to sell crap product, then stand behind it and repair/replace it prior to selling it to retailers!! You are a pathetic company!! STAY AWAY FROM WHIRLPOOL PRODUCTS!!!

I have an oven hood Whirlpool Microwave. Even though its more of a basic model it has worked terrific so far at about 5 years old. Only draw back is the extremely loud 4 beep alarm upon completion of warming up food. I actually cringe when it is about to go off especially early in the morning. Ours doesnt have the handy options button to turn it off. I have tried other combos with the buttons to see if they have it set up different but to no avail. Does anyone know if you can shut it off. The people who design these things must not have babies because they would think of this at nap time Im sure. Truly the sound this thing emits could wake the dead! I also had the fancy Whirlpool before like some folks mentioned about the handle and door frame cracking and disintegrating. Guess what, so did my parents, sisters, aunts and my neighbors. Definitely a major design flaw or faulty materials. My sister, mom got new doors and they began cracking again within a year!

I have owned a Whirlpool Gold refrigerator since 2011. It has required two repair calls due to a water leak. The company did repair it free of charge on the second visit even though it was out of warranty. It is now leaking again which has caused damage to my wood floor and basement ceiling tiles. I am told that I have pay for the repairs this time even though it is the same problem. I was offered a modest discount to purchase a new refrigerator. I will never buy another Whirlpool product. This refrigerator should be recalled. I recommend GE products. They stand behind their products and they last a lot longer. Shame on Whirlpool! So many complaints with very little response .

I like the experience of the microwave. Especially because it’s mounted in the wall and easily accessible. User-friendly, easy to use, and pretty self-explanatory. It’s very easy to clean which is something my wife really loves knowing we both are working professionals.

I have purchased Protton 3 door (Protton 20142, S.N **) fridge in Mar 2016 and since purchase of the fridge I have facing cooling issue. Its take around 24 hours to make ice. After sales service is also pathetic because after raised request the service person came about 6 or 7 days later, and he did not check anything and recommend me to go to the service center. I am not sure why Whirlpool kept this type service person and service. My concern is if Whirlpool is not ready to provide home service then should mentioned in service commitment we dont provide home service. I am using first time Whirlpool product and I realized Whirlpool product are very bad and service is also too bad. I strongly recommend to everyone please dont buy the Whirlpool product and I also want to know either Whirlpool will provide service or this fridge product is useless for me.

I actually need help, we have had our over the stove microwave for two years, for the last 8 months it has inconsistently worked. We have to wait for the light to come on before it will come on and here lately, I have push on it to get it to work. This happens daily. Does anyone have any suggestions, I would hate to have to replace a two year old microwave.

Just bought Whirlpool refrigerator, stove, and dishwasher. So far, the icemaker doesnt work and so I have no water or ice in the fridge. After four visits from Lowes it is still not resolved. Going on since 11/16/18. After waiting three weeks, the dishwasher came, and lo and behold - it doesnt work. Now I have to wait for one to be ordered! TAKE A WORD OF ADVICE - WHIRLPOOL ISNT WHAT IT USED TO BE. DONT BUY IT!

I grew up with Whirlpool appliance and thought they were top of the line. I have the washer and dryer and both are horrible. No matter what settings my clothes are on and no matter how little I place to be washed the clothes still arent getting clean. Way too little water in the tub. All my get so twisted. Anything with strings and stripes are ruined. I have never been so disappoint in a product. I never knew Whirlpool was such poor quality. Never again, so disappointed!!

WHIRLPOOL REFRIGERATOR MODEL WRF532SMBM01 FRENCH DOOR - Gasket in refrigerator door totally cracked in bottom part and torn on the side only after 2 years and one month of use. I have another Whirlpool refrigerator for 7 years without gasket failure. My other 3 previous refrigerators which I have owned more than 10 years. Each also never had any problems.

Whirlpool duet - I have had this machine for 4 years and have gone through as many door gaskets. They rip in no time causing damage to clothing and with the leaking damaging my wood floors. A definite do not buy!!!

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

We bought a refrigerator Model# WSF26C2 EXB last June 2012, and it broke down! Our one-year manufacturer warranty did not cover for any food loss. We would not recommend Whirlpool refrigerator to anyone. We called at 12:30 pm and they could not send anybody out to repair the refrigerator until the following day. Bottom line is, there is no compensation with Whirlpool.

Four years ago, we remodeled our kitchen and purchased the Whirlpool Quiet Partner II dishwasher, with a one-year service warranty. To be fair, we have not had a problem with the operation of the dishwasher, but rather, the quality of the dishwasher. Within the first two years, the front panel of the dishwasher started turning brown and rusting through from the steam escaping the dishwasher. The labels on the operating buttons have peeled off, again, from the heat of the dishwasher. The upright spokes on bottom tray, that hold dishes and etc. in place, started rusting through and breaking off. Guides which allow top drawer to slide in and out and hold drawer in place, have weakened, so drawer is constantly dropping or sagging.I have had other dishwashers that have certainly lasted more than four years but was encouraged by a Home Depot salesman that this was a great machine for the price! I should have paid closer attention to that for the price part. In any event, I called Whirlpools customer service department, believing that in this day and age, SOMETHING could be done to help with these issues and was told, quite succinctly, that there was nothing Whirlpool could do. I asked about standing by the integrity of their product and got no response to that either.I am an associate with American Girl, a company that stands by the quality of its product FOR LIFE. To be told by a customer service rep from a much larger company, that there was nothing they could do to help me, completely blew me away. I have taken pictures that are pretty indicative of the quality of this dishwasher and will be going online to warn other consumers against purchasing Whirlpool products.

I replaced a 15 -year-old propane water heater with an electric on 02/01/14, due to the high propane prices, $6 a gallon, and because I felt the heater should be replaced. After installing the electric water heater I filled with water purged all the air out, powered it up, went thru diagnostics and heated water to 120. After an hour I turned on the hot water at the kitchen faucet, hot water was there but not for long, water got cold,.I troubleshot the problem back to the anti-scald valve installed 15 years ago when I had a professional install the first tank. By placing my hand on the hot water line coming out of the tank, I found the water was indeed hot before the anti-scald valve, after the valve the water was cold indicating to me the valve was not functioning properly. I went to Lowes bought the parts to bypass and removed the valve, went home and in another hour had the problem solved! I wondered why I had to turn the temp upon the old heater to get hot water! I am very happy with my electric water heater, not only did Lowes have the last one in stock, it was on sale $100 off regular price, it is a digital controller type with water temperature setting on the front. I checked the temp at the water faucet in the kitchen. I had it set to 120, the water temp out was 119.8 on my digital thermometer. Water was too hot so I lowered it to 110, perfect temp for a hot shower. Even if the thing uses more electric than it should I still save because the fact of propane is so high I couldnt see spending $600 for 28 days of propane, versus $400 on a new electric water heater. I would rather pay a higher electric bill than feel I am getting ripped off with the propane dealers! Also there is absolutely no residual heat loss. This is well insulated even comes with pipe insulation!

This Whirlpool top load washer has been an awesome product. I have had it for 9 years and havent had a bit of trouble. Its very quiet and very reliable. The only maintenance is running a cleaning tablet on the cleaning setting once per month, and it tells you when its due... No musty smell problems that I hear from people with front loaders. Its a great product.

I have owned a Whirlpool Cabrio model no. WTW7800XW2 washing machine for less than 3 years. The plastic frame for the top glass lid cracked (on the right next to the spring loaded hinge). After reading that other people have had a similar problem, I contacted Whirlpool about this and talked to its TN call center representative. I requested that Whirlpool repair the appliance free of charge since there is a known defect with it. She said Whirlpool would only offer me a 50% price reduction from the retail cost of the lid plus charge me shipping and taxes. I will not be buying another Whirlpool product as a result.

I have owned the Whirlpool Cabrio for one year now. I cannot express enough what a complete waste of money this machine is. It literally does not wash clothes in even the most basic interpretation of washing. Clothes are almost in the same position as when they were put in the machine. Dont even bother with stain removal, it just rubs stains in and makes them worse. Seriously beware. Very expensive and not worth one dime. Im replacing with the Maytag. I should have stayed with in the first place. I will NEVER buy Whirlpool again. Must have skipped the entire product development on this one. I wouldnt even give it a one star review but the submission wouldnt process without it. WASTE OF $$ DO NOT BUY.

WARNING: Do not get the warranty plan through Whirlpool if you have stackable washer and dryer, you will have to remove the dryer yourself before they come out to service your appliances. I was willing to pay extra to have them take it down, the contractor said I had to call the extended plan service, yet 6 telephone numbers later to include the complaints department to no avail... Whirlpool contracts out so get your own and you may save a few dollars!

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

We bought a Cabrio washer & dryer September 2010 for a room addition that wasnt completed yet. We didnt get moved in until the first of November. So the washer wasnt used until then. In January 2011 (15 months later) it stopped spinning so clothes were dripping wet. We called Whirlpool and were told that they would be happy to set us up for a service agreement for $322 for one year. We declined since we bought the washer for a little over $500. When we had a local Whirlpool service man come out and he determined that it was the control board which would cost $265 (Whirlpool only warrants parts 90 days). I sent an email to Whirlpool and was told too bad, so sad. We called their customer care line (that is really not the term for that phone center) and asked to talk to a supervisor, who essentially told me the same thing. Whirlpool is making equipment that is extremely poor quality. There is no incentive for them to produce a better quality product as they make money on the extended warranties that are necessary, or if you dont buy an extended warranty they charge an extraordinary huge price for their parts, which they dont warranty. We will never purchase anything made by Whirlpool. I am not sure where this useless piece of junk that I have will end up but I intend to let everyone I know what a terrible company Whirlpool is to deal with.

My washer is at least 15 years old. When we bought it we had two school aged children at home. My husband and I now have an empty-nest and we have not had any service calls or break downs since we purchased this machine. It still cleans our laundry very well and we are getting our moneys worth from this washer.

The AquaLift self clean is a joke! Doesnt clean at all! Has to be consumer fraud, calling it a self clean. Ive owned electric self clean ranges for 40 years, that did great jobs. This does zip for cleaning! Unbelievable! Should be a rating below 1 star!

The burners were very crooked and the pans got burned out right away. They were covered under warranty but since then, they had the same problem with them with the new items. They had the light bulb stuck and couldnt get it out, they came under warranty and now a new light bulb wont work in it. The control top indicator light didnt work so I had that fixed under the warranty, but now it has the same problem and I cant afford to get it fixed and it could be a real safety issue.When it was under warranty, I called about the brown in between the oven door and they said it was cosmetic. It gets worse every time we use the self-cleaning oven like the seal isnt tight. The outside of the door gets brown also when using the self-cleaning oven. We thought we would have this range for a long time as we had a Whirlpool range before which lasted 20 years. I will never buy a Whirlpool product again and we have had a lot of them. e cant afford to buy a new one so we are stuck with this one with all its problems. Whirlpool just gives you the runaround when you call. When they brought the range, the self-cleaning oven part wasnt even hooked up so they had to come back and fix it. I cant believe they dont have more recalls on these. I have only had this for 4 years.

Cabrio (h2low system) top load washer ..USA 120 volt - A true piece of crap... Bought 2010... Even when it does work, 5% of any load will NOT spin out... The damn thing will refill its tub with rinse water to redistribute load so as to get a spin out. SOMETIME month ago, thing just dies... nothing. Technician comes out for two hours its the shift sensor. Replace for 200+ bucks... done. Works for three weeks, dies, tech is back. 4 hrs... its a bad processor board. Ordered 140$ rebuild, comes in mail few days later. Tech is back, replaces board. We have smoke!! Looks like a bad motor part. I could go on... but why. Never ever buy one of these sorry pieces of dreck. Absolutely the worst. Poor quality even when it works. Horrible wash quality. Never again Cabrio. Remember it.

Bought a new side-by-side in 7/2020 from Lowes in Keller, Texas. Salesman won me over with the buy American pitch claiming if the need ever arises for parts I would be far better off than with LG which orders their parts from South Korea. I bit, and bought, and now regret. The refrigerator dispenses water randomly and I must keep a glass under the dispenser all the time and empty it when it gets full. Under warranty they say! Well here it is September and after being on hold for an hour each time (6 times as of today) I attempt to get help they tell me that the part W11293378 is not available and will not be made until after this month? BEWARE this brand. This is a poorly ran company and buyers would be better served to look elsewhere.

I have a Whirlpool stove. Theres nothing but problems with the oven sensor. This is the 3rd time we have to replace it. It had problems ever since I bought and thats been 11 years ago. My Magic Chef lasted 13 years with no problems. I have a Whirlpool microwave that had a recall on it. Never buy Whirlpool!

I purchased dishwasher model #GU2800XTVT0 in May of 2009. Today, it leaked water all over and damaged my floor. My husband pulled the dishwasher out of the cabinet and found that the motor had fallen off. It did not have a bracket to hold it in place and worked loose, which then disconnected a hose. I called the customer service but they wont do anything because it is beyond the 12 month warranty. It only lasted slightly more than two years. This is obviously a manufacturing defect and we were just unlucky enough that it failed after the warranty had expired. The most ironic thing is that my husband worked for Whirlpool for 20 years. There is no loyalty here.

I purchased a Whirlpool duet, model #wfw9550ww00, two years ago with added warranty. The machine stops mid-cycle. The time remaining flashes but no error code. Pressing start would begin the machine again. Sometimes, we could go several loads with no problems and other times it will stop three or four times in one load. Occasionally, pressing start would not work and the machine would require unplugging and restarting. We have had several service calls in. They have said it was the pump, then it was the motor, then it was the pressure switch, and yet the problem persists. They are due to come out again tomorrow for yet another examination to determine its cause. Its the third time in one month. Its a lemon.

We purchased our 5 door/drawer frig in April. We have experienced two glitches when it failed to make ice for 24-48 hour periods. Now the freezer has stopped cooling. The first time the repairman came out he refused to move the refrigerator because the wheels would not roll properly. We had to purchase a sheet of thin plywood to put under the wheels so he could roll it. (We have vinyl flooring - the wheels just dont lift the unit enough to clear the floor.) When he returned 6 days later, he said the compressor was leaking and was not able to send enough Freon to the freezer section to cool it. The compressor is on back order and we have not been given a timeframe for its availability.

I cant begin to tell you what a pile of crap my Whirlpool range with Aqua Lift cleaning is! We purchased it brand-new and it is the slowest oven on the planet! If I want to cook a pizza I have to call home 30 minutes in advance so the oven will be 1/2 heated up. The Aqua Lift has never worked and the company has the most abhorrent customer DIS-service Ive ever had the misfortune to deal with! I hope these scumbags go bankrupt!!! AVOID anything Whirlpool! There is a class-action suit in the U.S. over what a slime bag bunch of crooks they are and how their Aqua Lift technology has NEVER worked!!

Bought this new in Oct 2012. A week back stopped working. After a week found out it needs new compressor and will cost 1,096.00. Paid 2,100 for this new and now need to buy another fridge but not this make.

Two Whirlpool washers in six years that the barren in back of tub goes out. When the first one went out in the same month the warranty expired, I was told by a repair man that it was not worth repairing because of the cost. I purchased a brand new Whirlpool and only months later, the same parts are broken on this new front loader. How cheap is the Whirlpool app. made? Whirlpool wants to only send me a tech. to fix washer instead of replacing unit altogether. After all, the unit is only a few months old. I cannot believe I have to deal with this again.

I purchased a washer 6 months ago and it was starting by itself so I called to get a technician out and it took them 3 days to tell me that they did not service in our area. Long story short I was out of a washer for 2 weeks talking back & forth with Whirlpool which was absolutely a nightmare. Kept me on hold forever and hung up on me several times so they didnt have to deal with the situation. Absolutely no customer service at all. When it came down to it they were going to issue me a new washing machine and I had to go to the store to get it and when I got to the store they told me I had a $415.00 credit to spend. Thats less than what I had paid for the washing machine and then I am having to spend an extra $200.00 out of pocket to get another washing machine.My warning to you is not to purchase any Whirlpool appliances unless you want to go thru pure hell. These people do not care about anyone after the product is sold. Their customer service sucks, their appliances suck and Whirlpool just sucks all the way around!! Worst experience I have ever had and I hope they never sell another appliance again!!

Im so disappointed with this product. Its only a couple of years old, which seems fairly new as my old washer was over 20 years old when I finally got rid of it because of the noise it was making! First, the Cabrio stopped draining and spinning, even though the display showed that the cycle was done. Phoned Whirlpool, and the best they could do was send out a repairman - at our cost, of course! We refused, and kept using the machine - put it on for an extra drain and spin. Then, it stopped working completely! My husband hauled it out to a repair shop and was told it needs a new motherboard at a cost of $400 plus labor! This was an expensive washing machine, and I feel Whirlpool should offer its customers better service! I guess we need to buy a new machine - definitely not Whirlpool!!

My Whirlpool has been in use about three years. It was purchased on sale at a very reasonable price. My only complaint is the heat dry function which somewhat fulfills its purpose, but I usually have to hand dry some dishes. Overall, it is an average dishwasher that gets the job done. The best feature is that it is very quiet; you barely notice that it is running.

I am a very unhappy owner of a Whirlpool Cabrio Model: wtw5640xw0 & matching Dryer. About 4 years ago, my husband chose to replace our 11 year-old Maytag Performa Washer & Dryer instead of fixing a part that needed to be replaced in the Washer. I was upset with the very first load of laundry in the Cabrio and I was extra upset that my husband had junked my perfectly awesome working Performa Dryer. )-: First of all, the Cabrio set is Extremely LOUD! Secondly, I often have to wash loads more than once because they do not get clean the first time. Next, the Washer is Always knocked off balance. Ive resorted to using the settings on the Washer with the low spin every time, no matter how light the load. And, now there is something wrong with the lid lock mechanism (which has always sucked anyway), but this is a new problem... I was just checking on the internet to try to figure it out when I stopped to write this review. The lid will not lock & the lid lock light wont go off, so the Washer wont do anything at all! I can not express enough what a piece of junk this Washer is & Im never going to allow my husband (who doesnt even do the laundry) to choose my Washer & Dryer again!

I purchased model #GI7FVCXWY01, SERIAL #KY4234335, and it arrived in Jan 2010. It is now going in the trash! Two repair companies came out and both told me the ice maker had issued a recall, but in reality, Whirlpool told me to buy the replacement part for $348.73 to fix their poor design! I called the 1-866-698-2538 customer service and so sorry is all you get! By the way, neither of the repair were willing to install the replacement part, as it takes too long to install and these compressors are never the same after the ice maker has these issues! Both repairmen said to trash the refrigerator. How sad that a $2500 refrigerator only last from Jan 2010 until June 1, 2014!!! I will never buy a Whirlpool anything!

I bought a 50 Gallon Whirlpool Gas Water Heater with an extended warranty from Lowes, it has not been delivering hot water as it should. I checked with Lowes and they told me I needed to call Whirlpool first and get a number from them before they could do anything. I called Whirlpool and they had me do a water volume and a hot water time test. By their own time test guide, my water temperature fell 30 degrees in 13 minutes and 52 seconds, when it should not have dropped 30 degrees until 18 minutes. When I reported this to Whirlpool I was told that there was nothing wrong with the water heater. I then lodged a complaint with the representative but it sounds as if nothing was going to be done.So I am out $999 for a faulty water heater and an extended warranty. Will update if anything changes. One of the reasons we bought this product was it said: MADE IN AMERICA. We wont buy any product made by Whirlpool again, We feel they dont stand behind their product.

My husband and I purchased a Gold Series, French Door refrigerator/freezer in 2012. Everything was fine until our icemaker took a dump a few weeks ago. It had to be replaced. Taking time off from work to meet the repairman with that repair was an inconvenience but it was only magnified when we were told he would call us an hour before the repair, which never happened. We were given the usual 4 to 5 hour window in which we could expect a service call, which is the standard these days. But I had to rush home when he called because we never got that courtesy call an hour before. The repair, as frustrating as the situation was, was made and we thought that would be end of that for a while.Things were fine until today when I discovered puddles of water on our wood floor as I was leaving for work. While mopping things up with a paper towel and trying to determine what the problem was, I discovered a frozen puddle of ice on the floor of the freezer when I pulled it out. This situation, obviously, was more urgent than the last one we had a few weeks prior so we were hoping for a bit more than the Well have someone come out on the 20th response I was given. It was only after jumping through hoops like a trained monkey at the circus and raising my voice a few times out of frustration, did we get a call from the actual repairman who said he would be out within a couple of hours.By his own admission, the small rubber seal the repairman replaced somewhere in the refrigerator, was known by the manufacturer to be an inferior part. He told us they are well aware of the problems caused by this inferior seal and that they eventually need to be replaced with one that is of better quality. Apparently, its cheaper for them to use the inferior one, and they choose to disregard the inconvenience, not to mention the potential damage that could be caused to a persons home because of it.We have a great many concerns on a great many levels surrounding this product and the way we were treated as paying, extended warranty consumers. This refrigerator was a major purchase for us. We placed our confidence in a company and a product we thought we could trust; not to mention making the assumption that if we paid good money for an extended warranty, a problem like this most recent one would meet with more of an eager attempt at getting us the help we needed without having to become as insistent and frustrated as we were forced to be.How disappointing to discover that spending over $2,000 on a major purchase like this and then being told we would have to wait 3 to 5 days for a repair. Having to take time off from work, or being told to wait for up to 5 days for any sort of help to replace a small rubber seal, known to be of inferior quality, that was replaced in 10 minutes is absurd. Think twice before spending hard-earned money on this product!! The tragic lesson, however, in all of this is the verbal confirmation by the repairman that just about all manufacturers are the same when it comes to corporations trying to save $$$ and blowing off the inconvenience and expense of their customers.

I have the same lid closure issue expressed by many consumers and whirlpool refuses to acknowledge this as an issue, only recommends purchasing a new lid at $225. Lid design is flawed, metal L bracket connects to plastic housing/trim/side of lid, causing glass to pop out and stress cracks between screws. New models of same washer have redesigned lid, no cross reference part number or dimensions listed to determine if new lid will fit.

I had my Whirlpool Quiet Partner 11 Portable Dishwasher for less than a year when it started leaving dirt, food particles, and white cloudy film on my glasses and dishes in the top basket. It got so bad that we started to wash the dishes twice but it would not clean the dishes. We called a repairman out to see what the problem could be. He checked everything and told us nothing was wrong with the dishwasher and to clean it with CLR. We cleaned it with CLR twice and the dishes looked better with the first wash. The next wash was the same with leaving grit and dried food particles on the glasses. I am now washing my dishes by hand if I want to clean dishes. Can anyone tell me what is wrong with my dishwasher? I am ready to buy a new one but not a Whirlpool.

They sold me a washer that did not work. First load failed and the machine locked closed. Error E1 F9. Took 7 days for technicians to open the machine. The laundry was rancid by then. Needed a new drain pump motor, which was installed 37 days later. Whirlpool offered $150 for my loss of clothing. Ridiculous. Value $900, I asked for $500. Awful.

I purchased the Energy Smart Gas Water Heater about a year and a half ago, intending to install right away as part of our upgrades. Just now, I was able to install this replacement to our 30-year-old water heater that was showing problems. When trying to start the unit, I kept getting the response that the lower sensor unit failed. We contacted plumbing companies. We were told they would not work on any Whirlpool models purchased from Lowe’s, because they were the worst hot water heater ever made. I called Whirlpool support. They wouldnt put me through to a tech support person until I was registered in the system. I gave up trying after many minutes of frustration.

I bought a Cabrio washer in late 2015. All Ive had is trouble with this joke of a product. After three years it wont do any cycle, the people at Whirlpool dont care. Please dont buy any Whirlpool product.

I like my refrigerator however is smaller and simple. The performance is great. The value was too much for the size and simplicity of the refrigerator not satisfy on that. Overall is very good and for the size of my family does the work. Im happy with it but will be upgrading in a later time.

On Saturday afternoon, March 31 at 4:30 PM Eastern Time, my roper washer that was purchased on April 17, 2011 overflowed from the top. Water went into the air ducts and completely fried my security system. My husband was out of town at this time on business. The water went into the terrace level of my house and ruined the carpet, walls and ceiling. The restoration and insurance companies came immediately and were a tremendous help. I felt very safe with them even though they were in my house until 1:00 AM Sunday morning. My husband and I visited our Lowe’s store where we had purchased the washer. They told us to contact Whirlpool which we did on Monday, April 2. We were assured by Whirlpool that we would have a Whirlpool employee in our home to fix the washer. We were also told that we could not move the washer. After speaking with a Whirlpool representative, we received an email confirming the repair person would be in our home on Wednesday to repair the washer. During this time, I had to go to the laundry to wash clothes. This cost me $26.00. On Wednesday afternoon when no one had shown up to repair the washer, my husband had to call Whirlpool only to be told that the repairman would not be coming but he would be there on Thursday between 10:00 and 1:00. He arrived at 12:45 and the nightmare began. He had an “I dont care” attitude and if my husband had not been at home, I would have been very uncomfortable. After looking at the washer, he said a part would have to be ordered and it would be the next week before he could fix it. I asked him what I was to do about clothes to be washed. He replied go to the laundry, he was just the repairman. He also said I could use the washer but not to put a full load. On Tuesday night, April 8th, I was washing and I had the washer on medium load and the washer started leaking from the bottom. We still have not heard from the repairman, today is Thursday. Also, my husband and I work outside the home. It would have been so much easier to have the washer replaced but instead we have to wait. We had a washer to be delivered on Tuesday, April 2nd, but we are still waiting on them. Most of the restoration work other than the washer has been completed. Thank you.

If you are searching for a top freezer refrigerator that works and keeps the food cold, do not buy this brand. I recently ordered a brand new refrigerator from Home Depot, the Whirlpool brand. It was set to standard factory settings, and I let it sit plugged in for 24 hours as required. The fridge was remaining in between 45 to 50°F, and I let it run for another 24 hours after filing a complaint and talking to the people at Whirlpool. The fridge still cannot get beneath 40°F, though the freezer seems to be okay. I spent almost $1000 on the refrigerator, and I’m very disappointed in the quality that this supposedly good brand produces. I went on Facebook marketplace, found an old 1995 Kenmore and bought it for $50. It works so much better than this brand new, fancy looking refrigerator, because back decades ago is when they actually took the time to make quality products, and didn’t make the crap that they do now that breaks down instantly or after only a few years. Unfortunately, and my researching has confirmed this, appliance manufacturers today create bad quality products that break down shortly in order that you will have to purchase more of their products after only a few years. Refrigerators used to last decades, now you’d be lucky if they lasted maybe 8 to 10 years. Trust me on this, don’t waste your time on this brand. A refrigerator should have no problem on factory settings getting at or below 40°F within 24 hours. DON’T BUY THIS JUNK!

We purchased a Whirlpool AccuBake oven in 2005. I think we used the self-cleaning feature about 3 times. The reason I mention this is it may be a possible cause to the frightening experience we had on August 15, 2012. My wife was cooking on the stove top when suddenly we heard loud electrical explosions coming from the back of the oven. We soon saw long arcing bolts of sparks shooting out the back, and my wife was terrified and didnt know what to do. I told her and my son to stay away from it. I ran to the circuit breaker box and turned off the breaker. We then looked in the back of the oven and it was on fire. I ran around looking for a fire extinguisher but my son managed to put the fire out. We called Whirlpool up and explained what had happened. They immediately sent someone out to look at it.I was very impressed at how fast they got someone out there. Whirlpool sent two technicians to look at the damage. After they were done inspecting, they told my wife that the problem is loose connections on Whirlpools side and not the feed and it had a damaged control board and that this is the fault of Whirlpool. He was very polite to us and apologized for any inconvenience. After a week had passed, no one called us, so my wife called and talked to some woman representative at Whirlpool. She told my wife that the report she got said that the oven had loose connection on the feed side from where we bought the oven and we should deal with them. My wife couldnt believe her ears and said, No, thats not what the technician told us, and the woman continued to talk and my wife said, Wait, slow down. The woman replied, Oh, am I going too fast for you? Well, I guess I have to talk slower then, in a sarcastic tone. My wife then called the technician who wrote the report and explained what the representative had told her, and his reply was, I cant believe she said that. I am not happy about this, that is not what I wrote in my report. Dont worry, I will personally take care of this. Again, the technician was civil and polite. After two days passed, my wife talked to the same woman again but this time she changed her story. She never apologized and said, It looks like in this report that the connections were loose to the control board. Since the oven is 7 years old and accounting for depreciation, Whirlpool is offering to you a total of $59. My wife said, Really, $59? How long is the life expectancy of these ovens? She told her, 10 years. My wife said, 10 years? Well, ours only lasted 7 and you are giving us $59 after we were almost killed and my home could have burnt down to the ground? She said, That is our offer.I called Whirlpool back and asked to talk with the safety supervisor and it was a woman again. Was it the same woman? It could have been the same woman my wife talked to, I was not sure. I asked her, When is it appropriate to issue a recall on a product? Our oven was defective at purchase. She said, You are the only complaint we had on this oven, so no recall is necessary. Yes, I said, but since it has been proven this is the fault of Whirlpool, I would expect at least a working oven from Whirlpool. I also told her the technician told my wife that Whirlpool should be bending over backwards for you, and she said, I apologize for the technicians remarks. I told her that I was dissatisfied and she will be hearing from me in the future. I did some looking on the internet and I found that KitchenAid which is made from Whirlpool had issues with a particular oven which was found that when the self-cleaning feature was used, it would heat up the control board, and since most people dont use the self-cleaning feature that often, it would take a very long time to develop. I thought that loose connections and heat are a bad recipe for disaster, and that quality control negligence and inferior components are to blame. Considering the past history and track record of class action lawsuits and appliance malfunctions such as the control board on their dishwashers, I believe it is all connected and related to my problem. Sorry but $59 isnt going to buy me a decent toaster oven, let alone a real oven. That oven should have lasted over 10 years and considering the possible damage and deaths that could have occurred, you would think that it would be in Whirlpools best interest to address this problem and bend over backwards for anyone who had the misfortune of purchasing this mickey-moused nightmare of a disaster-waiting-to-happen problem. Its not so much the money. What if a small child touches an oven as it conducts 220 volts then shocks into a childs heart to ground? What a ticking time bomb this oven is. As far as I am concerned, I dont want a dangerous oven like this in my home and Whirlpool needs to take some lessons in public relations.

Whirlpool® Gold® 5.8CuFt Capacity | GAS Stainless - This was not an inexpensive stove. The self cleaning oven function is a total failure. You are not supposed to use oven cleaner on the glass, it now has obscured the view into the oven. The top of the stove is very difficult or impossible to clean. The knobs are a dangerous issue. They will fall off at the slightest touch and the stainless markers around the knob are just a stick on label. The oven temperature is not accurate. The bottom drawer is completely rust spots on the inside. What more can I say. Oh I know. Whirlpool your quality is a disgrace and I want a refund.

We purchased the Whirlpool Cabrio washing machine around January 2006, and from the start weve had nothing but problems with this appliance. Within the first year, water was leaking under the washer which was coming from a crack in the plastic housing of the water pump. I replaced the pump myself to save on labor. No big deal. The very next year, I started getting the F51 code and there was no way for me to get around calling a service company to have it repaired. $350 and one circuit board later, it was repaired. It remained working without fail until recently when it began giving the same F51 code. Let me guess, another $350 for better repair? I have to assume that the new circuit board that was installed wasnt any better than the original one that was replaced. I wouldnt put another $1 into this hunk of junk and Whirlpool should be ashamed to have this product on the market. I will never buy another Whirlpool product.

I bought my Whirlpool gas stovetop in March of 2016. The burner knobs that connect to the stove is made of plastic and all 5 knobs broke within the first year. Each year I have replaced knobs and had issues with the knob breaking and then not being able to tell if the gas is off or on. I have called and talked to people at Whirlpool about this issue several times. Although they seemed concerned they will not replace the knobs and I have had to purchase them through Whirlpool. The gas stovetop obviously has a serious and extremely dangerous design flaw. I have kept some of the broken knobs just to tell others about this terrifying flaw. Again, last night the gas was on for several hours before we discovered it!! I called Whirlpool again and they were unconcerned. The Model is #WCG97US0DS00, Serial#D60509297. Beware and DO NOT PURCHASE this gas stovetop. I wish I had not bought mine.

Have a Whirlpool side by side about a year and a half old. Fridge started getting warm, so when I contacted the Whirlpool co, they informed me and sold me a year warranty to cover what the problem is and anything that would go wrong in the next year. The warranty is through Assurant. After contacting them, I found out they could not have a repairman out for another week. Wasnt happy, but nothing I could do. They found out the compressor was bad, ordered the part which showed up the next day, but could not come out to install it for another week. Getting more upset. Put it in and my fridge was hotter than before. Called and they could not have anyone out for (you got it) another week. The new compressor was bad. Ordered a second one, came the next day, and they put a rush on the repair so I only had to wait 4 days this time. Guess what, it still does not work. Had to wait another 4 days for someone to come out. So tomorrow is the day. We shall see will it be another compressor and another week to put it in? I never heard of any company stretching a repair over a months time. I am so angry with Whirlpool, Assurant and A&E repair company; you just dont know. I would not recommend buying or going through these companies. This is very unprofessional.

I purchased a Whirlpool Dishwasher, model DU1010XTXB1, 13 months ago and now it wont drain nor come on. Interestingly enough, the company claims no fault and wants to charge $129 just to diagnose it. This product has never worked properly, happens to have recalls for the exact same model number, yet wont acknowledge or expand its serial # coverage despite that it is the same exact problems! Do not buy from Whirlpool!

Our new home came with brand new appliances. I love our Whirlpool microwave. Its reliable, quick & has lots of great pre-programmed features to assist with regular. The independent timer is a total bonus too.

The washing machine (WFS10055CD) was working fine until two months after the warranty period...It worked the night before, but in the morning, there were no lights. I emailed Whirlpool, but I received no reply. So, I called their number to ask if they would honor their faulty product JUST out of warranty...They wouldnt accept this...I live in an area with no service agents for them so I would also require freight costs of 1,000 km away...I have had an electrician examine the unit to find it may be the control panel/mother board...seems funny many issues with Whirlpool machines JUST out of warranty!!!

I purchased the Whirlpool Gold OTC microwave model #GMH6185XVQ on November 29, 2010, and it was installed on December 26, 2010. After 18 months, the Magnatron went out. Its just me and my husband, and we eat out most of the time. So, it wasnt used a lot. I called Whirlpool, and Sherrie could only say that she feels my frustration. No, she doesnt. She has no idea. I just purchased $4000 worth of Whirlpool appliances, and now, I have no idea if they are going to last. It is a piece of junk that I paid good money for. In this day and time, we have to watch what we spend. I think Whirlpool should be a stand-up company and admit to taking our hard-earned money for a piece of junk. Dont they realize that its going to hurt their business.

We purchased a Whirlpool 5 top burner gas range in 2008. The oven stopped working. It would click 2-3 times, heat to 100 degrees then stop. Luckily, the range was still in the 1 year warranty. WP sent a tech out who eventually deemed it non-repairable. WP replaced the range. We were sent a letter offering an extended warranty plan May/June 2012. We took advantage considering our troubles with the first range. In October 2012, we noticed the oven started the same problem (2-3 clicks and would not ignite). In addition, the top burner clicks on its own to the point to having to unplug it. Since then, we have not plugged it back in for we feel it’s not safe! We have been working with WP Extended Service Plan (ESP). The obligor is the Federal Warranty Service Corp. for 2 months, ruining our Thanksgiving and now a few weeks till Christmas, our family is still without a range/oven. The ESP claims the damage is from chewed wiring from rodents. We live near fields that have just been cut; mice are coming into our home. However, when the tech came out, finally, he claims there are no chewed wires and the part he has to fix the oven is not worth putting in and will contact the ESP claims department to deem the range/oven non-repairable. This is the second range/oven - its doing the exact same problem as the first but ESP refuses to help us. The last supervisor would not do anything. We requested his ID# and he hung up on us. I contacted WP directly and waiting to if they can help.

I have always used Whirlpool products and have grown up with them. From washing machines to dishwashers. Not only is it made in the USA but its reliable. The only problem is space and it can do with more freezer space. Other than that its a great refrigerator.

We got what was a top-of-the-line Whirlpool Refrigerator about 10 years ago. It is still running, BUT all of the drawers have broken at least once and the door shelves no longer work. The replacement cost for each item is ridiculous especially considering how flimsy the items are. We decided to look at Whirlpool Refrigerators since the one we have is still running. They have changed absolutely nothing in the drawer or door design. It is all still very flimsy especially compared to the competition. I would strongly advise anyone looking for a fridge to look elsewhere, since, obviously, the quality of the interior is not a priority at Whirlpool. Avoid Whirlpool Refrigerators. The drawers and drawer shelves will ALL break since they have put no effort into fixing obvious defects.

We have a Whirlpool with freezer on top, nothing fancy in the apartment we rent. Twice the lines have clogged up with ice, causing the water to pool in the bottom of the fridge and then leak onto the floor. The maintenance man said this was a common problem in the complex with the refrigerators. Tonight, I heard noise coming out of the fridge. It was so loud it scared the cat. I went to check on it and a juice bottle had exploded in the fridge. It cannot keep an appropriate temperature. Things up front are barely cool and things at the back freeze. We are moving and unfortunately, the house we are buying has Whirlpool as well. When it comes time to replacing the refrigerator, it will not be a Whirlpool!

I have had this unit less than a year and started having pilot problems. I would just relight and ask family members to take shorter showers or not run the washing machine or dishwasher at the same time. I would have to relight the pilot 3-4 times a year and would just tolerate. Now the water heater fails on a daily basis. In the last four weeks, my wife would say NO HOT WATER AGAIN. I am so tired of dealing with this, so last night, I called Whirlpool and associate was polite but gave me a lot of things that I should do (43 yrs a pipefitter). Before all was said and done, he is shipping me a new gas valve (at my expense) that I will gladly install to get rid of this problem. Will not EVER buy a hot water heater from Whirpool or Lowes ever again. Whirpool should stick to washing machines!

I purchased a Whirlpool wash machine and dryer from Home Depot 3 years ago. From the outset we had problems with both units. Wash machine spin cycle does not work properly, and that causes a problem with getting clothes dry. Some soiled clothes will not clean properly and have to be hand washed. Dryer rarely works on one cycle, towels and bed sheets have to be run through a second cycle. These are NOT energy savers. Garbage product, I will never buy Whirlpool again.

I have been given a runaround for over a month to get my refrigerator fixed. They gave me a defected piece and it broke down in less than a year. I have been calling them up every day and they put me on hold forever-then they ask for all the details and direct me to another company. As of right now I have not received any help-My family is really frustrated as we have no fridge all this time. I dont know what to do.

This new Whirlpool washer hasnt worked from day one and the company wont do anything, they wont even answer me, I will never buy one again, all the same problems everyone else is having, Im just waiting for a lawsuit.

When you purchase a Cabrio high efficiency washer dont expect clean clothes! But, you can expect holes, torn and, smelly clothes. It takes a ridiculous amount of time to wash. The machine I purchased has a glass top but its dark and you cant see into the machine so that was a waste of money! If you wash clothes in 1/4 depth of water, nothing gets clean. Who even designed this disaster? I had enough common sense to know it was going to be bad but the salesman at Lowes informed me that ALL washers were high-efficiency and getting a tub full of water days are over. I wish we wouldve just paid for repair and kept my old washer. I hate doing laundry with this machine! I use to be able to wash my blankets, pillows, curtains, throw rugs, even car mats with no problems. Not anymore! This machine couldnt handle it. You ought to see my sheets and shirts when theyre done. They come out twisted up so tight I have to untangle them before they go to dryer. What a horrible nightmare of a machine! If we were not out so much money Id send this machine to the junkyard and get a real washer with realistic amounts of water! How are you saving anything when clothes require 2 times to get somewhat clean??? If youre reading this and considering a high-efficiency washing machine, DONT DO IT!! You will regret it. Im counting the days when I can junk mine!

My dishwasher was a $300ish model from Lowes. It is over 5 years old and has been reliable for a single persons use. It is run about once a week on average. Early on I had problem with it not cleaning well but that was the fault of one of those no leak supply hoses that restricted flow...fixed that. Would I buy again? Yes.

I like my machine even though there is no agitator. It is a top loader so it does not smell. It is a water saver which, when I first got it, I thought that it could never clean the clothes in that small amt of water...but it does clean the clothes very well.

We purchased a front loader Duet in August of 2011. It is now January 2013 and we had to have a service person come out. We did not buy the extended warranty because a washer should last longer than 1 year 5 months, but not ours! We need to have the drum replaced at $600. Are you kidding me! I will never buy another Whirlpool product.

GS6SHEXNB02 Whirlpool Gold Refrigerator - Bad ice maker module. Ice maker valve is bad. Its gone out 3 times a year since I got it. We order a replacement, it goes bad again. Its not the ice maker itself, its a bad valve. Signs its going out, ice maker stops making ice or the ice cubes are small or the refrigerator water will start pulsing coming out (start and stop). Whirlpool made a bad product and they know about. Several complaints online about the ice maker no longer making ice. Bad product.