8 cu. ft. Cabrio® High-Efficiency Top Load Washer with Steam - I bought a new washer. It did a poor job rinsing and spinning dry. Whirlpool customer threatened me that a service charge may be charge if the repairman came out and found nothing wrong. After calling three times I ordered a repairman out. The repairman explained that only way to prevent soap residue on your clean clothes is to use the bulky and deep water options. Also dont use high spin or when it spins your clothes dry, it leaves them in a tangled mess that requires ironing to remove the wrinkles. This washer is not ready for the market and must be removed until they can perfect it. It cost me $200 to return and exchange this model for the Front Load Duet, which works excellent. Whirlpool should be ashamed to have ever put this machine on the market.

I purchased all new Whirlpool appliances for my kitchen from Lowes about 5 years ago. The dishwasher was leaking water onto my hardwood floors after about a year. I figured out that the seal was pulling away on the lower left corner. I fixed that myself. It cleaned pretty well for about 3 years. Now its not cleaning at all. I took the lower spray arm off to try to clean it. Almost all of the holes are clogged with debris. (I clean the filter at least once a week.) I went ahead and ordered a new sprayer arm, maybe that will help.As for the rest of the appliances... After about 6 months, the freezer started filling up with water that then froze on the bottom and allowed water to pour onto the floor. The microwave handled broke after about a month. (They did send me a replacement handle.) The knobs on the stove are starting to peel. One of the knobs wont stay on, so I keep it in the drawer next to the stove. Overall, I am very disappointed in all of the appliances. This will be the last time I buy Whirlpool.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

Worst company for home appliance... I got my fridge repaired from an authorized service person and next day it again stopped functioning. Upon calling the service center again, they said that few more things needs to be repaired once again and for that fridge needs to be moved to their workshop and for that they will be charging 1600 Rs again. Upon asking for the refund for the useless spare part, the rude service person said ek din k liye to chale tha na fridge, fir kis baat ka refund... Such a ** company is Whirlpool that they are not entertaining any complaint on their all India customer care number...

I live in a new community, and this French Door refrigerator with bottom freezer was offered as an upgrade. Two of my neighbors and I have had the compressor break right after the refrigerator warranty expired. Luckily for us, the builder purchased and extended warranty, so we were all covered. I have NEVER had a compressor go out in ONE year.

This is a good size fridge/freezer with double doors 25.4 cu ft, its given us good service for 13 yrs without any problems. My only complaint that I wish it was more quiet. (Whirlpool brand) double doors, ice maker w/ water and lights.

Whirlpool - good price for pair. I have had this pair for over 10 years and they work good and are reliable even though they were not the top of the line models. Large capacity is a must - energy efficient is also a must. Discounts are nice to get but if not available I will go with a name brand. I want a washer with an agitator not one of the new ones that dont have one. Reliability is the most important factor so repairs are not needed. I want a full size washer with several cycles and all cycles have a cold rinse to save energy. Having a center agitator is a must - cant stand the newer ones.

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

Weve had this Whirlpool 5000DW1 machine since June 2017. Never fills with enough water no matter what cycle you pick! Clothes come out with DRY areas on them! Obviously not clean. Who would design a washer that you put soap in and clothes right on top of that! Seriously, how ridiculous. I will forfeit the money spend on this junk if its possible to find something built today that cleans clothes.

I bought my Whirlpool refrigerator model #ed5fvgxws07 in Oct. 2011. One year seven months later, I am experiencing my 1st breakdown. The refrigerator side is failing to cool. I have replaced the temp control thermostat and I am waiting to see if this fixes the problem. I have researched and checked the other possible problems and it is unlikely that it is a defrost fail as there is no frost build-up in the freezer section. And, I checked the heater element and there is continuity through the element. If this does not fix the problem, I believe that there is one other possible solution. I dont have $300.00 to give to an appliance repairman. Maybe I should give it a rap on the side as one other customer said a repair person did to make it work for a few more weeks.

Ive had this dishwasher for 1 yr and 4 months. Its been used properly and kept clean. The motor quit. A dishwasher that only lasted a little over a year. Cheap piece of junk. I spent over $800.00 with installation. I will never buy a Whirlpool dishwasher again. Try and call Whirlpool and someone in India will politely read from a manual and waste your time. Useless!!!

Problem resolved - This is an update to my previous complaint... The repair man arrived this morning and after resetting the thermostat, the water heater started up again. He explained to me that these new water heaters are super sensitive because of the new designs and systems that are required by the State of California. He said that all brands have to have the same system. He said that the new water heaters dont breathe as well as the old ones. In our case, he suspected that after being installed, there were probably some air bubbles in the pipes which tricked the computer into telling it that there was not enough ventilation, when in fact our ventilation was fine, but that triggered a total shut down! In my previous written complaint, I was really upset because I have not had a shower in 3 days and thought this problem water heater would not be fixed until next week. I was furious! My understanding is that basically the way the new water heaters are designed is not very well and there is nothing we can do because about it they are all the same, unless we want to go to a tankless water heater system which plumbing included would cost $4000.00... so we are stuck and hope this will not happen again!

We have owned refrigerators for over 40 years. Never had one as bad as this. Three ice maker replacements lasting maybe from 6 months to 2 years. Cap that off with customer service people who by voice and tone could not give a rats ** about helping the customer. Today it took me from 3:10 pm to 5:30 pm to get a real person on the phone. When I did the attitude is so reminiscent of a fast food hamburger joint with arches. Yes they know the refrig and ice maker are and have been a problem but they don’t care cause we have no option. Whirlpool will NEVER SEE ANOTHER penny of my money. Time to look at real appliance makers. Horrible.

Cabrio top loading washer - I have had this set for 3 years. The first 8 months it was fine, then came all the rust. I had to go to the BBB and file a complaint as everyone at Whirlpool would not help. Last year they finally replaced the top, and now, its rust yet again. I rinse and dry the machine when I am done using it. The repair man said it was because manufacturers are not using primer and just one coat of cheap paint. What now? Ill see if I can get the lid off and sand it and use rust preventer on it. Never again, I should just junk this piece of crap and Whirlpool should shut down if they cant make anything worth our hard earned money.

I am in construction and have had to deal with failed motherboards on new Whirlpool fridges that we put in some rental properties. Knowing that, when I went to buy a fridge for my own house, I went to a very reputable appliance company and talked openly about getting a fridge that wasnt going to be a problem. My sales agent and I go back always and he was very open about the problems with the more gadgeted Whirlpools so we picked a low bells and whistles French door fridge to avoid that. It stopped cooling at about the same age as all the rental units did and had a control panel fail. The sales guy and I laughed about how even knowing about the issues I didnt avoid it. Their company came out and fixed it for just short of 300 bucks.Two months later, it stopped cooling again. The service tech came out and this time hit the side of the fridge with his hand and opened a relay getting it to work, at least for another week. The tech told his boss that I must not have shut the freezer causing it to go into defrost mode. The third time it failed, we were out of town and lost all our perishables. We had the same tech come out and replace the board he got to work the last time with a whack to the side of the unit. That board should have been under a parts warranty for 90 days but I may have missed that with the slap repair working for the additional 2 weeks.Im trying to put this behind me but Whirlpool sent me an Extended Warranty Plan opportunity. I can now buy a plan on an almost 3-year old fridge. I am wondering if they are trying to give me the hook up on a bad product or just hoping to prey off my fears and cash in. The company I bought the appliance from has been first rate but their hands are tied by Whirlpool who has virtually no support for their vendors. Before buying a Whirlpool, consider a Sub-Zero. After you figure in the repairs, they arent too far apart in price.

Model #wfw70hebw Duet washer. Lasted 18 months, replaced one sensor and then find out computer board is toast. Seems this was an issue as I was told there is a CORE deposit on the old board so it can be repaired and resold. WTF? New board (repaired) is almost $300. That is a bunch of bull.

I purchased a Whirlpool gas top range from Lowes in Somerset Ky September 2013. Model number WFG524SLAB1. The surface is showing bubbles. I contacted Whirlpool and they gave some kind of story. In other words I am stuck with it. Still under warranty but they wont send someone out to look at it. Lowes told us that it could be a paint defect when it was made. If the top starts peeling, it will be a real mess. I have never used anything abrasive on the stove top. As of right now I am not happy with Whirlpool at all and if they dont do something about this, I will never buy another one of their appliances.

We bought a Whirlpool washing machine, and what a mistake! I just got off the phone with their customer we dont care department. It spins everything into a tight ball so when the clothes come out of the washing machine everything needs ironed, even permanent press. It also changes the water temperature. I like to wash some clothes in cold water, but the representative at Whirlpool told me it will sometimes add hot water to make the water warm. I am hoping this review will save others from purchasing a Whirlpool washing machine. We will stay clear of all of Whirlpool appliances due to the problem with this washer and Whirlpools lack of concern of an inferior product!

Purchased a new French door Whirlpool fridge May. It replaced a Whirlpool that was here when we purchased the home. Ten days after purchase the fridge went to 21 degrees and began freezing over food and drinks. Yesterday a tech replaced parts to repair the fridge. Today the fridge is once again at 21 degrees and freezing food and drinks. We live in a relatively rural area. Tech cant come back until six days from now. Very disappointed. Wish we considered another brand.

My whirlpool duet was extremely quiet the first few times I used it and seemed to work well. Then I noticed that it randomly drained the clothes but didnt spin them, it did it on different cycles, and I would have to run the load again on spin and drain, another 19 minutes of run time. After a week it began to make metal scrapping sounds on the spin cycle and vibrated to the point that it moved the pictures on my walls. I called Whirlpool customer service and they authorized a service call. In short, the service man was very confrontational told me there was nothing wrong and charged me $72. It still vibrates and randomly doesnt spin. But now after he took it apart it sounds like a jet engine when it does spin. Whirlpoolss response after repeated calls? Not a new machine, but another service call......

Whirlpool cabrio top load washing machine sounded like a jet engine taking off on spin cycle then started spewing grease on the floor. Called hotline with make mod ser #. Repairman came out 5 days later. OOPS! Whirlpool made a mistake, repairs not covered. Please pay repairman $450. Should have had him make the repairs then threw him out of my house.

We had Lowes install a Whirlpool model Nu40T121-403 natural gas water heater early October 2012. The temp controller went out in October of 2014. I replaced the controller myself at a cost of $30 for overnight UPS from the manufacturer, American Water Heater. The controller went out again almost exactly one year later and I again replaced it for the $30 shipping charge. In both instances the customer service person told me the malfunction was probably due to my not flushing the heater annually, causing a sediment buildup. The water to the heater not only flushed annually, but is filtered through a water softener and there was absolutely no evidence of sediment in the drain water or on the part of the control that is in the tank. Now it has stopped working a third time. I called Lowes about replacing it, but they only carry Whirlpool, so wont be buying a replacement from them.

Whirlpool Wash-And-Go washer and dryer - I purchased these new November 2016. Since week two, they have been a constant problem (i.e. not enough water to even get clothes wet, forget about clean; gulping soap from the dispenser; rubbing holes in clothing; putting rust on washed items). The dryer NEVER gets the clothes dry; no matter what setting they always come out damp, even after Ive put them through for two cycles.Three separate repairmen have come to work on the washer replacing sensors and the entire control board. It worked fine for two weeks, now its back to guzzling soap. (It is supposed to do up to 12 loads on one refill of detergent. I get two per refill. Ridiculous! Soap isnt cheap!) And, today it ruined brand new bathroom mats with rust all over them that I had to hand wash to try and remove without much success. At this point I would advise anyone looking for new appliances to try any other major brand and NOT Whirlpool. As soon as I can get the money, these are being junked and Im NEVER buying Whirlpool anything again!

EveryDay Care? Every day I hope the part needed to make my new Whirlpool refrigerator work again is delivered so it can be repaired. I bought it in December and since then the WRF992FIFM has had the ice maker fail and need replacement and the fan unit in the refrigerator went out 2 days later. It has been nearly a week now and I am using dry ice to keep my refrigerator cold enough to store some food. The authorized repair service did not have the part and Whirlpool is shipping it directly to me but I do not know when. No tracking info, nothing. Three days and no delivery. Then I must call the repair service back to schedule yet another appointment to install it. Meanwhile, I am paying $13.00 to $20.00 per day for dry ice, not to mention the time I had to take off of work for three service calls - for an appliance I took delivery of on December 21st! Less than 2 months. I am finding out quickly that Whirlpool is very generous with apologies and stingy with results. I should have checked the Whirlpool FB page before making my purchase. But they sure are quick to try and sell you the extended warranty. I am developing a whopping case of buyers remorse.

I placed a service call for a high pitch sound that emanates from our new Whirlpool refrigerator MD#WRF990SALM00. It is hardly perceptible although hurts my wife and Is ears. The technician was courteous and efficient although said that the sound was typical of this model. He did find another issue with condensation forming at the top and returned with the repair part in a timely manner. I placed another call to Whirlpool whom suggested that I order a different authorized service company to investigate although if the results of the call was that it is a typical sound of this model that there would be a service call charge. I will most likely order this service call in the future although I will wait to see if there are any similar issues that arise. If you experience the same problem with your Whirlpool Appliance please leave your experience. Thank you.

The warranty on Whirlpool is totally useless!!! I purchased a new refrigerator from Lowes in September 2015. I have had to call 3 times because the ice maker quits working. (It has been replaced 2 times so far.) This time I have been without my icemaker for 6 weeks. When I called today - they informed me they would contact another repair company, but they could not come out for 1 month. They acted like I was bothering them - when I called again today - I did not buy a new appliance to have it break down every 3 months. They only use A & E Repair and Tri-County Appliances, and they must be so busy fixing other Whirlpool appliances that break down - that you have to wait 4- 6 weeks for a repair. Ridiculous!!

The dishwasher is noisy and the latch which holds the soap, at times sticks. When we think it is done and ready to unload we need to run it again because the latch that holds the soap DID NOT open. Not good.

I am questioning my loyalty because the last two Whirlpool fridges have been repair prone, and have bad design issues for ice dispensing. The dispenser door doesn’t close reliably and lets the ice maker warm up and melts the ice. This supports my rating.

Bought on 9/11/2014 and installed by Lowes installers on the 15th. It quit heating two days later. Called Lowes and they said I would have to call Whirlpool. I did. WP had me metering with a multi-meter until found OTC button was tripped. Then they suggested I troubleshoot the elements and sent me a video. I called Lowes and they said they would replace. Later they called back and said WP would not give them a RA number and for me to call them. I did and the rep after much arguing directed me to call their factory authorized service, A & E. I did and they said it would be 33 days before they could come out. I hung up and called Lowes who called back later and wanted me to call WP again. This time they said they did not have a repair service close enough to come, but I could try buying the lower heating element and replacing it to see if that worked. I said no, the heater was brand new and they needed to fix it. Their next solution was have me contact a local plumber and arrange to troubleshoot, me pay the plumber and then send them the bill. They would reimburse me up to $100.00. Not acceptable and now the button has to be reset every few hours and the water gets scalding hot while it is heating. I called Lowes and they said they would get back to me, but I have little hope of a resolution. Product number is ** SN is ** Model is E2F50HD045V. Bought at Lowes, Lindale, TX.

Bought top of the line KitchenAid refrigerator $4500... Completely stopped working in 3 months. Cannot get ahold of anyone at Whirlpool & their phone system is ineffective. Appliance technician came out, cannot get the parts he needs from Whirlpool!?! He said that if he cant get parts in 21 business days then Whirlpool may consider replacing the fridge. Is this a joke?!!! I have a 1970s Frigidaire still working!

I purchased my whirlpool washer on 01/24/2011 and I purchased a 5 yr extended warranty at the time of purchase. My washer broke down. I called the whirlpool co. After 5 mins getting through the phone prompts and another 30 mins on hold I finally spoke with a rep name Ashley who state that there was no account or record of my warranty. She connected me to another department where I spoke with Eva. I was advised that since the company that sold me the warranty was out of business whirlpool would set up an account for me if I faxed the information documenting my original purchase. I faxed the information, waited three days without a response. I called today went through the phone prompts and could not reach the reps I spoke with before. The reps today were not helpful and refused to even try to get me to the reps I spoke with before. I was advised that the previous reps provided inaccurate information.If an appliance comes with a one year warranty and a consumer purchases a 5 yr extended warranty should it be added to the 1 yr or is the first year included in the 5yrs? Wouldnt it only be a 4 yr extended warranty if that were the case? I am very disappointed in the lack of quality of my washer and misrepresentation that was communicated by whirlpool reps. At the very least they should answer the phone promptly and honor the commitment to repair products. This is the case number (**) I was provided the first time I called, but it is not recognized by the reps I spoke with the 2nd time. I was provided 866.368.6478 as a contact# and a fax#. I faxed my receipts to that number as instructed.

The wash machine is JUNK. We paid $2500.00 for our washer & dryer at lowes in 2012. I HATE IT from the start. It has destroyed most of my clothes. I hate doing my clothes. The water does not get my clothes wet, they dont get them clean AND the washer dont even get them wet. THEY need to do a recall or get us a lawyer. ALL the money I have put in this washer. The price we paid for them is a SHAME. IT is WRONG they are telling people that this washer is the best. They lie. I HATE HATE THEM.

I had a Whirlpool washer that was 31 years old so when the motor went out I bought a Whilpool Cabrio. I HATE it!!! First, it takes at least an hour for 1 small load to finish. Then the clothes are not even clean and rinsed all the way. Dry patches on clothes and where the soap did reach the clothes there is white soap scum all over. I tried using the extra rinse function and still soap everywhere. Im hardly using any soap to begin with. I have to wash some things twice to get the soap off. Thought I was doing good by buying HE. What a waste of money. I cant wait til it breaks which should be soon according to all the previous comments. I have only had it 4 weeks. Dont buy this machine!

I have read the reviews and agree with all negative comments. There is no point in investing in a high efficiency machine when I have to rewash many dark items several times in spite of always adding the extra rinse cycle. The clothes appear cleaner if I do not add liquid fabric softener, but as I prefer to use my clothes line when possible, I am unable to use fabric softener. Also, although it is supposed to be a high capacity machine, I only fill the tub about one third of its capacity, hoping this will increase the cleanliness of your clothes. It doesnt seem to help.I have contacted Whirlpool several times and the final suggestion was that pay for a technicians visit, approx. $100, plus extra for repairs. I have decided not to throw good money after bad and to buy another brand of washer. This is the WORST appliance I have ever owned even though it is supposedly high-end. PLEASE do not buy a Whirlpool appliance. If the Cabrio washing machine is an indication of the quality of their appliances, you will be wasting your money.

Whirlpool Calibri washing machine - I have the washer for 4 years and have replaced four computer boards to the tune of nearly $300 each. When Whirlpool was told of my experience, they said they were sorry. Obviously, I am too and will not buy again. You would think they would give me one board at no cost, but I guess words are cheap.

Four years ago, my wife and I also purchased a Whirlpool washer and dryer set, washer model no. WTW6600SB2. Within the first year we had to replace both pumps twice, user interface, and control board. (I think that’s what it was called). Of course, that was all covered under warranty. But I to had to wait a week for the part and then another week for the repairman to make it. The user interface and control board had to be replaced because moisture got into the control panel and caused corrosion on the circuit boards which caused them to short out. Then it wasn’t long after warranty ran out, the whole wash tub and drum just dropped to the floor with a full load in it. I don’t remember exactly what was the cause of it, but I do remember it cost me $580 to fix it. Then it wasnt more than two weeks later, the repairman had to come again and replace the control board again. There went another $600 for the parts, labor and service call because this time they had to come from 40 miles away and it’s a minimum fee of $89 just for them to drive up here and another $60 for diagnostics, and then the part and their time to install new board. I paid for this machine twice in the first year and a half. Then after all of that, it was finally working like it should and worked great for about 6 months, then came the UL,LD, and Lid Lock codes over and over unplug, plug in, unplug, plug in. That lasted for about a month, and then all of a sudden, it straightened out. And we only got the occasional UL code. Now in the last year, I have had to replace the drain pump twice and then the drum and motor dropped on the shaft allowing any loose change or other items if accidentally missed during pocket searches to fall into the outer wash tub and get sucked into the drain pump and causing a quarter to be shoot through the drain pump making a hole and caused my laundry room to flood. Well, I decided I wasn’t going to buy another part so I used a plastic repair kit to fix the hole and got it up and running. A week later, the washer won’t wash. It will fill and that’s it. So upon my own diagnostic, I came to the conclusion that it was the user interface that went out due to corrosion I found on it. So for another $120 I can fix it, but I’m not sticking another dime into the washer, nor will I ever buy another Whirlpool appliance. Once all of my Whirlpool appliances die, I will replace them one at a time with LG. I to contacted Whirlpool about my problems and all they did for me was send me an extended warranty offer for 50% off, really that’s it, that’s all I get is a big GFY after all the money I have stuck into this piece of scrap-metal. Well, never again will you have my business as long as I live. Whirlpool, you need to take your hoo-ya and do something about all of these complaints.

Our Whirlpool Cabrio Washer is barely over one year old, and its getting increasingly louder (I cant hear the TV in the other room). I researched this issue and found this is a common problem with the upper and lower bearings. Check it out on YouTube; its easy to find. Whirlpool should buy these back! Is anyone aware of a class action lawsuit against Whirlpool regarding these pieces of junk?

Im no longer buying Whirlpool products. They do not all up and are made like crap. My Cabrio washer being the most recent problem. Hinges broke on the lid and the drum spring broke. Out the door it goes! Im having my American made Speed Queen delivered tomorrow, the last Speed Queen I owned last over 30 years.

Thermal couple went out and nobody has one. You have to get it from whirlpool. This could be a easy fix with buying a $6.00 thermal couple but the one on mine has left handed threads. I took it to several parts places and they all said you have to buy it from whirlpool so you have to call the 1 800 number and they ask you how soon do you want it, 5 to 6 days to take a shower for $10 shipping, or $20 for 3 to 4 days without a shower or $32 for overnight? This ** should be free if they are the only ones that have it. I never heard of this crap before. The funny thing is they told me I should replace my water heater since the warranty is expired. Dont worry I will buy a new one someday and it will be anything but a whirlpool. I will never buy anything whirlpool again and make sure my family never buys whirlpool.

I like Whirlpool, but the ice maker never worked right. Now l have to clean the ice off the dispenser about every three days. Other than that has been good. This is my third Whirlpool refrigerator.

I bought this piece of junk Whirlpool Cabrio washer two years ago and it’s been nothing but junk. Just like everyone else, this thing has never gotten my clothes clean no matter what I do. Anything with a drawstring or straps gets ripped up or stretched out. It’s loud and shakes, even though it’s leveled. Now, to top it off, it’s leaking water from the basket seal. I called Whirlpool and they couldnt give a damn. Since it’s out of warranty, it’s my problem, even though she said they know this machine has a lot of problems. So now Im stuck either fixing this thing or buying a new washer. Every appliance in my house is a Whirlpool and Ive had nothing but problems with several of them. I thought when I bought the brand it was a good brand and they stood behind their stuff. Boy, was I wrong! I will never buy Whirlpool again! They should recall this washer!

Ive had my Whirlpool Gold for over a decade and absolutely love the quality and performance of the unit. No maintenance issues whatsoever throughout the years. I recommend this washer to everyone I know and continue to enjoy the performance and reliability of Whirlpool. I will continue to buy this brand every time as needed.

We bought a gas Whirlpool Stove from Lowes. We noticed it was not heating like our last stove and thought maybe because it was new. No the stove does not heat properly at all. I cooked a pork loin for 40 minutes at 350 and it was still raw in the middle. I have had to cook everything on 375 which makes the door handles and knobs very hot. I called Lowes and they patched me into Whirlpool after a 45 minute wait. The rep from Whirlpool said, you can look at the manual and figure out how to calibrate it. No I cant. I have a warranty that is what it is suppose to cover. Then I was on hold for another 20 minutes. Really no one should tell you to read a manual to fix a gas stove. I will not buy another Whirlpool item. Poor customer service and that make you feel you are bothering them.

I bought the Whirlpool model e2h50rd045v electric water heater to replace my failing gas water heater on July 21, 2014, and had it installed a couple of weeks later after a little over 3 years of use. The water heater is still working with no issues or major problems. I'm happy with the decision to purchase this water heater.

I was going to write a negative review after our Whirlpool stove oven stopped working. We only had it for three years. Technician’s visit today was $70 for the information that we would be better off buying a new one because the motherboard is gone. However, after reading all the horror stories which are already here, I realize that we are relatively lucky - at least, our stove worked for 3 years... Still very disappointed and unhappy. No more Whirlpool products!

Overall the stove works well but it is horrible to clean. You have to use a lot of muscle to get the spills up from around the burners. It is hard to get around the burners to get all the spots off. The gas burners work well & cook evenly.

I just bought a Whirlpool Gas Range from Home Depot on 11/11/2014 and I am having problems with the oven. It is still under warranty and have five year protection plan. I called to have the problem fixed. Two technicians and the oven still doesnt work.

In April of 2009, I bought a Whirlpool over the range microwave, model # MH2175XSB-5. In September 2011, a small piece of the door fell off at the hinge. Pieces have continuously fallen off and now the door is splitting, rendering the item useless. It was purchased at Lowes and I had them installed the item. Two years of service plus installation come to big bucks for a piece of trash.

Stainless steel side-by-side refrigerator (4 yrs. old) - I have to continually clean the rust stains. Ive used the products Whirlpool has suggested and the rust continues to appear. Lowes extended warranty does not cover this problem because it is cosmetic; Whirlpool reps say its due to the coastal area where I live and that they cant do anything about it! I understand that there are many customers experiencing the same problems with Whirlpool products. Their customer service is worthless and is their warranty to stand behind their products!

I cannot adequately express my dissatisfaction with the Cabrio washer and dryer that I purchased couple years ago. I will never buy a Whirlpool product again. That includes Maytag; Kenmore; or Amana products. I have had nothing but problems from the start. The washer sounds like jet engine taking off in the spin cycle. I found out the washer needs new tub bearings ~ $200. The washer is tearing up towels during the wash cycle not sure what the cause is.My washer will only wash clothes in certain cycles (bulk). I keep getting error codes in normal or other cycles. The washer takes long time to fill so it times out during fill cycle. I replaced fill lines and checked for blockage, everything was clear. The washer probably needs either new motherboard or water inlet valve. Not sure which, maybe both? It is impossible to wash a load of clothes without getting the UL unbalanced load indicator. I also have problems balancing the load. I have taken wet clothes out and put them back in with no luck. It takes hours for a load to finally wash.The dryer has had its problems. I just replaced the belt tensioner on the dryer because it was making a terrible screeching sound. The noise was very annoying. I am very disappointed with quality of Whirlpool products. However, don’t worry about improving customer relations because I will never buy a Whirlpool product again. P. S. How come you have not issued product recall? There are 1,000s of similar complaints concerning the Cabrio washer. Frustrated customer.

I have use Whirlpool washers and dryer for years. I had Washer and dryer that lasted me 20 years, even when I thought they were going out I had purchased another set maybe two years before and they were still running so I left them in the house I sold, I would recommend Whirlpool to my friends and family.

Purchased this set in January of this year 2016. The loudness of this machine struck me first along with the constant banging of the pipes in the basement when filling with warm water. The agitator is very loud. Thought I was trading up from a 10 year old Whirlpool front loader set. There is hardly any water in the washer when running a full load. I take clothes out that are not only a twisted tight mess but in some spots are not even wet!!! The dark clothes inevitably need to be rewashed because there is white residue on them!!! I have used the pods and liquid and it doesnt seem to matter, happens with both. Customer service has no answers and say theyve never heard this before.How can this washer wash clothes when there is no water and little if any movement of clothes??? And how is it that we are all saying the same exact things and Whirlpool is not being held accountable??? I DONATED my working fine set to a dog rescue and am now stuck with a brand new machine that works PERFECTLY HORRIBLY. So who is watching you Whirlpool???

Our countertop Whirlpool microwave oven is just over two years old and one of the led lights in the clock display just went out. The push-button opening mechanism is very hard to work and quite loud when the door is shut. When the timer is set but the start button is not activated for a few minutes, the door warning goes on and you have to reset the timer. There are five beeps that indicate when cooking is done and they continue even when the door is opened. The only way to stop them is to push the stop button and there is no way to adjust the noise level or number of beeps.

Ive bought two (2) whirlpool dishwashers in approximately two years. Both dishwashers stopped draining shortly after one year. I checked the filter, removed parts at bottom of appliance and checked the drain hose and my home drain to make sure that none were clogged. After testing the draining system a burning motor smell started to occur. At that point I disconnected and threw away the appliance. I dont know for sure but I think this is a recurring and known defect.

Remember the old movie classic Network, with the line, Im mad as hell and Im not going to take it anymore? Well, that is me and my new self-cleaning Whirlpool ranges that requires a manual cleaning kit (provided by Whirlpool after my purchase). I am angry enough that I have approached an attorney and I hope that if you have your own story about an AquaLift fail, you will include it on my website **. Thanks...

The exhaust fan for the gas range runs when using the microwave. The noise is loud and very aggravating and there is no way to turn it off. From what I can find the older models there was an option to turn it off. On the new models Whirlpool cut costs by not putting a small (QUIET) fan in the microwave but used the range fan for a dual purpose.

After replacing our competent GE dishwasher with a Samsung dishwasher and having to replace it immediately due to the terrible job it did, we bought a Whirlpool Gold Series (stainless tub) for just under $400. I realize this is the bottom of the stainless tub price point, but we have been so disappointed! The silverware container sites outside the regular tub, and rarely cleans even easy substances to remove, if there are more than a few items in each container. Dishes on the other levels are very hit or miss -- each and every load has to be examined for dirty dishes. Id pull this one out and return it too if it werent such a hassle. Dont buy this product.

Ive had it with Whirlpool products. I am now getting rid of my third Whirlpool microwave in just eight years. Every one of them had the same exact problem and Whirlpool continues to deny there is a manufacturing defect. Each of them developed a hairline crack extending through the bottom screw of the door handle to the glass on one side and the outside door frame on the other. They will do nothing about it and claim it is just a coincidence. No more Whirlpool ever!

I brought a whirlpool dishwasher in 2013. It never did clean dishes, had to wash them by hand before putting them in dishwasher. Had someone come out and check it. He told me I was using wrong type of soap, so I changed. That didn’t do a thing. Now I have mold growing in the dishwasher because the tub is cracked all around the inside. Called whirlpool, of course they couldn’t do anything about it. Have never heard of dishwasher cracking. So today, Lowes came out and took picture of crack that is where I brought it. So am waiting to find out what is going to happen. Will not ever buy whirlpool again and will tell all my friends.

In March 04 2014, I purchased a Whirlpool washing machine. After having had a Whirlpool for 17 years without any problems with it, I purchased another one. This last one is a piece of junk. I dont even want to talk about the noise, I think it is expiring or on its last leg. They should fire the engineers that invented this model and bring back the other engineers that invented the one I had for such a long time, they far surpassed these space scientists that they now have. On August 8, I called Whirlpool, they sent me someone from Dinos appliances. This man tells me that there is nothing wrong with this machine and that he re-calibrated it. Whatever that means, it is still not wringing the clothes properly. There are only 2 people in my household, so my loads are not very large. I even tried this Drain & Spin cycle after the wash was completed and the clothes still came out too wet. I also have a Whirlpool Dryer and I will not replace it with the same brand. I also will never buy a Whirlpool product again and will make sure that I will share my experience with everyone I know.

Phone calls took too long (30-45 mins each). Connection was bad. WHIRLPOOL APPLIANCES ARE **. Whirlpool appliance was poor quality, broke down and not fixable. Unable to find replacement dryer ANYWHERE that will match my existing washer stacking kit. The loyalty program discount is a joke.

My Duet Sport washer drum is damaged due to the poor quality of the bearings. I replaced the Whirlpool Duet Front Loader Washer Bearing & Seal Kit W10253866, W10253856 but because the bearings were damaged the drum is also damaged. When I opened the rear panel of the washer the bearings had literally come apart and bearings fell out. All of the floor and the oil/grease was everywhere. I replaced the bearings but it didnt matter because the drum is warped. Priced the drum and it is nearly $400.00 to replace the assembly. The cost of the drum assembly is about half the cost of a new washer. I will never buy another Whirlpool product again. Just a shame that the cost of a replacement drum is so high. What caused the bearings to just explode and damage the drum. What did I do to cause this? Absolutely nothing. I have since discovered that this is has happened to scores of people with this same washer.

My wife and I spent about $2500 on a new Whirlpool Dutch Door fridge five years ago. 18 months later the evaporator went out and the warranty was only good for one year! We bought an extended warranty, got it fixed and the other evaporator went out less than a year later after that! Next, the circuit board control on the crisper went out. Then, the water filter would not disengage and a repairman had to take the fridge apart just to put in a new filter! And now, the ice-maker has gone out and the fan is icing up like another evaporator is going... Insane! Our warranty is up next year. Once the warranty ends we will start shopping for another unit - and it wont be a Whirlpool - thats for sure. I have never owned anything this unreliable in my entire life! Also, I would say most of the time we have owned this piece of you-know-what it has made a loud disturbing fan noise... What a waste of good money! Run! Run far, far away!!!

I have the same issue with cooking time on my Whirlpool wall oven (WFE54OHOES). Bought it in January and have not yet had a single recipe come out cooked. Outside is crisp, inside uncooked, after twice the amount of time it used to take. Its still under warranty. Service came out and told me to bake differently. Thats an answer for you. I am going to pursue this issue with Best Buy where we purchased it.

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

I purchased a Cabrio top-loading high efficiency low water washer thinking I was doing something for the environment by saving on water and electricity. After about a month, I noticed that my clothes especially those with stretchable fabric were getting larger. My husband kept telling me I was imagining it. Then the clothes would get all tangled especially the pants with ties on the waistband. At the end of the cycle, the clothes are stuck on the sides of the washer and I have to pull them apart. Even after drying, I have to iron everything even my pillowcases which look like they have shrunk they are so wrinkled. I recently bought some 100% cotton outfits and they are even more wrinkled and are starting to lose their shape. I am now noticing that the stains on the clothing are not coming out even when I use a spot remover and put them through a second time.Now I started to notice an odor coming from the machine and my towels and wash clothes have a sour smell. I paid $600 for this machine and after reading the reviews, I just want to replace it. I am now waiting for it to break down. My husband kept insisting I must be doing something wrong. When it goes into the spin cycle, it bounces all around and I have to push it back in place when it is done. I do not think the clothes are getting rinsed enough so now I put them through a second rinse and always put it on low spin. It doesnt see to matter, it sounds like a rocket ready to take off. Is it even worth it to go back to Lowes where I buy all my appliances?

I like my dishwasher very much. Because we have hard well water I use Lemi Shine to cut down on any deposits. The top shelf is adjustable so that helps with large pans getting clean.

I purchased a Whirlpool High Efficiency washer and dryer (Model WED4900XWO) from Lowes in March 2013. This washer has performed miserably. I dread each day when I have to use it. The groaning sound is annoying. My husband and I try to leave the house when the washer is being used. We have tried all cycles and combinations of cleaning detergents to get clothes to come out clean. On a regular basis white clothes will come out with spots or discolored to the point the clothes have to be thrown in trash. This is the worst washing machine I have ever used. I will never buy another Whirlpool product.

Im going to add my 2 cents to the already poor reviews of this dishwasher. Ive been disgruntled about it since it was first installed. The silverware rack will not stay shut, so when you go to shut the door all the silverware falls into the bottom of the washer. And its totally rusting. All the pins in the carriage are literally rusting away. This is a faulty washer and Whirlpool needs to find a way to repay their customers. Ill never buy a Whirlpool product again.

Ice maker stopped making ice. This side by side Whirlpool refrigerator was purchased 4 years ago. We called Whirlpool. An authorized repair man identified the problem. At the bottom hinge of the freezer door two of the wires have been broken. A defective design, but no recall from Whirlpool. The solution is to replace the entire freezer door for a cost of $1200. Ridiculous that a replacement door cost more than the purchase price from Lowes. It would appear that these 2 wires could be reconnected, but Whirlpools only solution is an entire new door. Automakers stand behind their products with recalls, but its not the same with Whirlpool. Love my Whirlpool range, washer and dryer, but this counter depth side by side is a real loser.

We bought the dishwasher on 12/28/11. It broke 4 weeks later. I had the company come out to fix it. 6 months later, it broke again, needed a whole new control board. 3 months later, it broke again, they came out and did some type of repair. 7 months later, it broke again and it needed a whole new control board. They wanted to charge us $250.00 for this, but after some major arguing in regards to how New this was and the warranty now out, they waived the fee. 3 weeks later, the same problem as before! I am so angry about this lemon of a dishwasher! They are coming out again today! I am quite sure they will need to replace the control board again! I will never buy another Whirlpool product.

I bought a Whirlpool dishwasher from lowest in May of 2011 and it stopped draining, serial # f11601686. I was told it was under warranty and you sent someone out. But surprise, I got a $129 service bill and it couldnt be fixed, computer board gone and drain motor shot. I was told its cheaper to buy a new one. After 10 months of use, we need a new one. I think you should replace my dishwasher and pay for a service call. Oh, the reason they said it wasnt covered is because they sold me a 2007 model.

I earlier filed a complaint about the Whirlpool Gold microwave arcing within a minute of cooking frozen green beans and causing burn holes in the food. We contacted Whirlpool’s customer service and were told that the machine was no longer under warranty, but we could have it serviced, repaired and have an additional year of warranty for $259. We took a pass on that. Further trial and error along with research helped us come to the realization that the arcing was caused by the high mineral content of the green beans. Whirlpool did not tell us this, but we found the information provided by others. We no longer cook the particular brand of green beans which seem to cause this event. The microwave is no longer arcing. You would think Whirlpool might be aware of this.

Whirlpool microwave 1163XVS - I purchased a new home and a Whirlpool microwave in May 2010. The microwave has all of a sudden stopped heating! Turns on, spins, counts down, lights up, etc., but will not heat. Found this site by trying on my own to detect a possible reason and Im shocked to see these many complaints of the exact problem. Unbelievable, should be class action suit maybe for continuing to take money from consumers for defective product that Whirlpool knows about and appears to not take responsibility. Ive read enough, not even going to call for repair. Im buying another brand and spending more wisely this time. Thanks for the heads up. Shame on Whirlpool.

We purchased Whirlpool Cabrio 8.8 cubic ft Electric Dryer with Steam Cycles (Chrome Shadow) Energy Star Model WED8500DC and Whirlpool Cabrio 5.3 cubic ft High-Efficiency Top-Load Washer with Steam Cycle Model WTW8500DC and have had no issues at all, only personal issues, such as me being 54 tall and cant reach the bottom of the washer tub to take out all my clothes, so my husband helps, he is 5 9 tall and can reach in it fine, so we do laundry together now! We have washed very small loads to large loads such as, bedding sets without any issues at all. We love the gorgeous look as well. We have only owned these since November 2015... so about 4 months now, but we are completely satisfied! We have always owned Whirlpool, our old set we bought in 1998 and they finally gave out in 2015! Whirlpool for life for us!

I am a single mother of a 5 year old and I take care of my mother as well. I purchased a whirlpool because I believed them to be reliable, boy was I mistaken! I am in the military and while on an 8-month deployment I got a message from my mother that the washing machine had stopped working. Here is my mother who cannot drive - with laundry bags and a 5 year old in tow walking to the laundromat to wash, only to carry wet laundry back to the house to dry. Thanks a lot Whirlpool! My cousin in Michigan tried to help my mother with the company and a repairman as much as possible from over the phone. Here is what I got:The washer repairman came this morning. He did the diagnosis but I did not approve the replacement parts and repairs. First of all, he said that the motor control board was bad. To replace it with a new board would be $503 and a refurbished one would be $490.03. If the motor control board was replaced, it might fix the problem with the user interface. If not, the cost to replace that would be $302.62.Apparently there are 4 boards that could have problems. He also said there was a problem with the start button. Anyway, we ended up paying for the service call ($129), but I thought the cost for the replacement parts was too much to justify when we could get a new one for about the same cost. He recommended that we get a Service Contract when buying something new because of the cost to replace the parts.While doing some research online, unless you purchase an extended warranty or have experience in 2M; you will be researching new washers every 2-4 yrs. What happened to built to last? It seems to me all this technology/circuit boards/computers to make things work have degraded the appliance quality.Im sorry for the bad news but I just wanted you to have all the info. Let me know what you think. I know the washer is only a little over 2 years.

I purchased a Whirlpool washer (WTW4800Q) in November 2011. Already, it has rust in the tub. The warranty does not cover this. I never really liked the thing since I have had it. It takes much too long. Lid locks and then starts over. Also, warranty is not good. I wouldnt ever buy their product again and suggest no one else should either. I loved Maytag before Whirlpool bought them out. Im putting this one on Craigslist and buying a real washer, a Speed Queen! Yes, Speed Queen has all metal parts and makes a home washer. Just have to find a local dealer. They are there.

I purchased a new gas water heater from Lowes and paid a plumber to install it. I have been having problems with it staying lit. Once I noticed the issue, I notified my plumber and the plumber was aware of this on-going issue with these water heaters. The plumber told me to call Whirlpool and have them send me a new thermocouple. Ive been putting it off until now, but realized today over the phone with Whirlpool Customer Service that the problem is with the vent. The manual that came with the water heater has a horizontal venting installation, yet Whirlpool claims that it should be vented through to the roof and they sent me, via email, the correct manual. When I asked Whirlpool how the plumber was supposed to know, she said that he should have known that it was not the correct manual (even though there is no model number written anywhere in the instructions manual) and that we should call to make sure that we have the right manual before installing my next product. So, I need to double check every purchase I make! Or is this only with Whirlpool products? After speaking with two different Whirlpool reps, I have concluded that I need to purchase a new water heater, but believe me, it will not be another Whirlpool!

We purchased this washer (Whirlpool Cambrio #WTW8000BWO) in December of 2014. It is now 3 1/2 years old and while the washer worked great til just recently, we now have to purchase a different one because this one will cost too much to repair. We did not get the extended warranty. I have since read that the Cambrio has had a lot of problems. Always check the long term owners and what they have to say about the item, would never have purchased this washer had I known what the problems were and that they even were having them they should have taken it off the market til they got the situation fixed.

Purchased on Nov 2010 at Lowes. Washer machine sounds like an airplane on the wash and worst on the spin cycles. Bearings are gone!! Customer service was no help. Basically was told I was ** out of luck. Have service bulletin addressing this issue, yet they refused to help. $1300 learning experience about Whirlpool. Social media here we come. Goal: to keep at least 1 million customers away from their scrap!!

Whirlpool refrigerators with bottom freezers have a major defect in a tiny drainage hole hidden inside the back panel. The hole easily gets blocked with bits of debris during manufacturing or with a few bread crumbs, then it freezes shut. Then water ends up all over your floor. You cannot fix it yourself as you have to take apart the whole freezer. The repair bill is huge. This will happen often. Check on the internet and YouTube to verify & you will see that this happens to everyone with a Whirlpool. Also your floor will be ruined if you dont mop it up every few days until the repairman arrives! Stay away from Whirlpool!!

I purchased a 50 gallon Whirlpool water heater, model FG1J5040T3, in November, 2005, and have had the same experience as reported by the hundreds of others, whose comments I have been reading. Basically, pilot wont stay lit. I called Whirlpool, relight the heater, when it doesnt relight, wait to receive repair parts, call a plumber, and pay to have them install it, then repeat same problems. Each time going for a week or so, without hot water.After relighting the heater 10 times in the past year, and service calls, Whirlpool authorized me yesterday to return it to Lowes, and get a replacement. I need to hire a plumber to unhook it, haul it to Lowes, get the new one, and install it. It cost me about $300 to $400. Will the replacement be any better? I am considering just replacing the heater with one made by Rheem.

I bought a new Whirlpool gas range a few years ago. I am now trying to purchase my 3rd control panel at a cost of $281.00. The oven will not bake or broil. The oven now a provides storage area until we can purchase a new range, which will not be a Whirlpool or any brand associated with Whirlpool. Very Dissatisfied.

Cabrio - In Dec 2013: Ran the Clean washer cycle and it would not cut off. I had to shut off manually. Called the company and they sent a technician, who said he fixed it and that everything was good. Fast forward to Feb 2015: Tried cleaning the washer again. When I left the house there were 10 minutes left in the cycle. When I arrived home 7 hrs later, the washer was still running and my hot water heater had cut off. I had to reset via the circuit breaker. This will be my last Whirlpool appliance for a long while.

I just finished reading multiple complaints that sound very similar to my experience in 2014. I bought a fridge for a rental unit in Oct. 2013. The freezer malfunctioned and froze up in back, 6/2014. Had multiple repairs with the problem going unfixed. After a couple of months with my renter without a fridge and laborious system requiring multiple phone calls on my part to get an exchange approved. The exchange went thru. It was delivered the am of Sept 11. Guess what? It was dented on the side. The delivery personnel thought is was prior reject and it was an attempt to get me to accept it as is with a small cost reduction off the original purchase price. NO thank you! So still no fridge from Whirlpool as of 9/13/14 that is functioning from Whirlpool and yet to have a call back from Whirlpool regarding the mishap. No apology, no remorse, just the way they do business. I will say that my local HOME DEPOT was willing to send me a loaner fridge for my renter for his garage. NOT ideal but better than nothing and quite nice of them and an example of what customer service should be! Thank You HOME DEPOT! SHAME ON WHIRLPOOL! Not sure how this will end but obviously is common them after reading the reviews. I am now concerned if they do replace it again with an undamaged fridge it will repeat the same dysfunction pattern and I will have to go this painful process all over again! EEEEK. Refrig WRT771REYBOO, VS33469859 BTW I had to pay for spoilage of food for my rent on multiple occasions because the repairs work for a week or so and my renter would stock up the fridge and it would go out and he would lose food. Whirlpool gave me a 50 food spoilage card after much complaining bc go figure the warranty does not cover food spoilage but apparently the extended does. Go figure?

I purchased a Whirlpool WTW6600SW in January 2010. I dont normally purchase an extended warranty, but it was a fairly expensive washer. So I did. In July 2011, water starts gushing all over the floor. After my first visit to see what is wrong, I ordered a part. I was out of a washer for 2 weeks. Then in August 2012 the same thing happened. This time the repairman didnt get the part on properly, so they had to come back a third time. I am out of a washer for about 3 weeks. Now, October 2012, it is doing the same thing again! Customer service tells me it has to be repaired for the same problem four times in the same 12 months in order to receive any replacement value. It will have to break two more times! This washer is a piece of junk!

The agitator is higher than any I have seen and when we washed aprons that have plastic buckles on them, they get stuck under the agitator. When complained their solution was to use laundry bags to wash 15 aprons in, they are long aprons. Paying a lot of money for the machine and it being commercial I didnt think we would not be able to use it. The whole machine shut down when three of the buckles got stuck. The washer is model # CAE2793BQ and I would suggest that no one purchase one of these machines.

We remodeled our kitchen and my wife liked Whirlpool, I didnt, but I went with her since she got a good deal with Lowes. We bought a microwave, dishwasher, stove, and fridge. I cant wait till all of it craps out! Going back to Sears! In less than a year I have replaced the stove and stove, the fridge sucks. The fridge already had a defect with a water leak, damaged my hardwood floors!!!! Still waiting on Whirlpool for my floors. The dishwasher never cleans, it always stinks. The stove does not self clean, the handles dont stay tight, shall I go on!

We got a french door Whirlpool refrigerator about 15 months ago. Model Wrf757sdem01. There were problems from day one. Serviced about 6 times by 3 different companies... Died again less than 2 weeks ago. Finally the store decided to replace it. Was under an extended warranty. We have been without a fridge for over 10 days. It has caused multiple problems for us as we are out in the country. We have to haul ice to 4 coolers... Wait on the new one (a Whirlpool). Plumber had to be called in and he has had 3 of this same model replaced! Years ago you could trust Whirlpool. Now apparently not. I hope we do not have to regret our replacement one which still is not installed! By the way the water filters have to be replaced to the tune of 100.00 a year. We are not going to use an icemaker or get water from the new one.

Two and 1/2 years prior we bought a new whirlpool range - W10201511 WHT. After one year we had to replace a computer module at the cost of $500.00. One year later we encountered the same problem. Today we went and bought a new Kenmore stove rather than keep putting good money after a bad Whirlpool product. Very disappointing.

Less than 3.5 years use on a 2015 Whirlpool dishwasher...total costs to repair would be $600. This just to let other know. Whirlpool did nothing for me when the same issue showed 15 months after purchase and again 18 months later. Absolutely horrible experience. I dont want them to contact me and I post this as a warning to others. They just want to sell you high priced service contracts. Terrible dishwasher and even worse customer service.

2010 upright Whirlpool freezer - Door is totally bubbled in rust. Warranty Plan not covered for this. Whirlpool Corp Serv. Dept said they are sorry but it is not a functional problem. Cost of repairs on 3-yr-old freezer that cost $600.00 would be $732.62. This freezer was rated CR Best Buy in Sept 2009 which was why I purchased it. I paid $81.00 for repair tech from Whirlpool today who could do nothing either. Whirlpool knows that this has been a problem as consumers have complained about this rust in Google, some saying they will never buy a Whirlpool product again. Same here!

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

The oven is a joke. It does not self-clean. I have to buy oven cleaner and clean the oven like in the distant past. They are lying about it being self-cleaning. Do yourself a favor and buy a real self-cleaning oven. NEVER WHIRLPOOL.

My Whirlpool stove works really well, and it is self cleaning. I have had my present oven/stove combo now for 5 years and had not had one single mishap at all. I am so confident that you will like it I am personally recommending it. It bakes beautifully and if there is a spill or overflow in the oven I just press a button & it cleans itself!

This is one of the best washers I have had 4 years now. The spin cycle is great. Feel almost dry when done. My daughter was going to order this set but cant get them anymore. I guess it is because it is too good of a washer.

I was very excited about the performance of the washer as far as reduced water usage and reduced electric usage. After about 6 months though, I couldnt figure out why a lot of clothes, sheets and drapes came out with streaks on them. Very expensive to replace! Of course, the business I bought them from tried to get me to buy all types of fixes that had nothing to do with the problem and therefore couldnt answer me why this was happening. I am not crazy about a lengthy lawsuit. I am crazy about hoping the washer dies so I can go back to a less fancy washer that did the job better than this expensive monster!

The dryer is okay but the washer is no good. Doesnt save water because clothes have to be washed twice. Sometimes thrice to get them clean. Cycles are longer therefore more energy used. More water, more time, more energy. Terrible design. Useless piece of junk.

What a disaster! Within one year we had to repair the stove twice, the dishwasher and the fridge! Almost three years later, we are experiencing problems with two burners and with the fridge! The company does not stand behind its products. Avoid them.

This is the worst washing machine Ive ever purchased. Bought 12/19. The water level never never goes up high enough, to cover the cloths. I have to add water no matter what setting. I hate that. The sensor isnt working. You arent able to adjust it yourself, its computerized. The water shuts off when you lift the lid so you cant rinse out the soap or fabric softener caps. I hate that. The lid locks when the rinse cycle starts so I have to unlock the lid to add fabric softener. Why lock the lid so soon, wait till its in spinning mode. Really really badly designed!!!! Will never buy anything by Whirlpool ever again!