I purchased the model WDF530PAYM0 serial: F14106104 dishwasher. The foremost reason I purchased this was it had nylon racks. I have discovered that the racks are rusting! It is rusting on the ends where nothing can touch it. I am very disappointed that it is advertised having nylon racks and now it is rusting and deteriorating. This dishwasher states racks-nylon, not racks-nylon coated. I just took some pictures of the racks. I decided to look underneath the top rack where the upper spray arm is located. Now I am plain sick! Most of the underneath is rusting. This dishwasher was purchased and installed 2 years ago. I paid $600 and you would assume that something mechanical would quit after years of use on an average of 1 to 2 times per weeks. Not this one...rusting racks and hard telling what damage the rust flaking off during running is causing to the mechanical components. Lesson learned: Their definition of nylon and nylon coated has no difference.....I very much disagree!

Brought brand new. Had for ten years. Still going strong. Matter of fact all appliances are Whirlpool. Dishwasher, stove top, oven. I like the sharp clean look in my kitchen. Easy to clean!!

I initially purchased all new Whirlpool products as part of my new home purchase in a Pulte subdivision, June, 2011. My WP microwave failed to heat in 2012 and the replacement of the Magnetron and Inverter and service was covered under warranty (would have cost me $493.51). Sadly, the microwave again failed to heat in 2014. I was so disgusted with this second failure, I decided to live without a MW until January, 2016 when I paid for my second service call and learned, once again, I needed a replacement Magnetron and Inverter, to the tune of $400. Both servicemen told me the 2011 magnetron/ inverter mechanisms were new technology and did not last long. Again, sadly, when I contacted Whirlpool, they would not admit to their defective product line and indicated they could do nothing since I am out of warranty. It is unconscionable that a corporation is not liable for their defective products.

I have purchased all new Whirlpool appliances for our new home in March 2009. I have had trouble with the refrigerator door panel and will not switch between ice and water. Cost to replace over $100.00. Now its the range. When turning on the oven, my wife said she saw a flash of bright light and then I turned around and it was smoking up the house! I quickly pull the stove out and unplugged the stove. I then remove the back panel and found the right side of the control panel was burned. Had I not pulled the plug, a fire would have started. I have pictures to prove that! The cost to replace the control panel is $267.00 and that doesnt cover the repair man coming out to test if anything else is bad!

Front load is terrible. Doesnt wring clothes thoroughly. Runs for 1 hour on fastest cycle. A HUGE WASTE OF ENERGY! NOT A GOOD MACHINE!!! Our clothes are wet always after the spin cycle. It also doesnt do small throw rugs. Awful!

I have had my water heater for 5 years and the repair is going to be close to $300.00! Whirlpool offered to send me the part and if I want hot water tomorrow I can pay $30.00 for shipping! $10.00 for standard ground! My other water heater was builder grade and lasted 12 years! Go figure.

My husband AND I purchased our Whirlpool Cabrio washer and dryer from Lowes in 2011 (Model # WTW7800XW2). About 10 months after I purchased this I noticed a hairline crack on the right side of the frame that holds the glass top near the hinge. I didnt think to much of this. I figured it may have been screwed to tight when manufactured. A few days ago I noticed the lid wasnt sitting flat and saw the crack had gotten much worse. The Cabrio lid is made with a heavy piece of glass inside a plastic frame allowing you to see through the top. Its pretty obvious that the plastic frame is not durable enough to hold the heavy piece of glass.I called Lowes and they told me that because I didnt purchase their extended warranty that I should contact Whirlpool. I called Whirlpool and was told it was a cosmetic defect because the washer still works. They also told me my washer is outside of its warranty so they would schedule someone to fix it but I was 100% responsible for the repair costs (which I found out will be $400). Out of curiosity I googled this issue online and found numerous people complaining about this exact same issue. When I told this to the customer service agent at Whirlpool, she said there werent enough people to recall the product. Why should I spend $400 when it was a design flaw that caused this problem? I found out the year after my washer was made, the lid was redesigned with a much sturdier frame, Coincidence? I think not!I havent had any problems thus far with the dryer but with the experience Ive had with this washer will make me never by another Whirlpool product again. I cant believe they wont stand by their product! Obviously they know this has been a major complaint on this model from 2011 because it was changed the following year. I have purchased many Whirlpool appliances over the years but dealing with this issues has been frustrating. Im so disappointed in Whirlpool and their lack of integrity!

I love my washer and dryer but am a little disappointed in a few areas. First, my washer stopped spinning normally after a few years, I forget exactly why. Then my clothes were too wet when it was done. My dryer then did not get my clothes dry in one cycle. Also, it was going to cost $500 to fix my washer which wasnt worth it. But Whirlpool did send us a new tub and all the parts for free. Thankfully my husband is handy and after finding a YouTube video, replaced it all and now it works again. My dryer still doesnt always dry everything all the way. I often have to do 2-3 cycles in the dryer to get my clothes dry. I thought there was supposed to be a sensor that would keep the dryer going until there was no more moisture. Maybe that is broken too.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

I would not buy any Honeywell electronic water heater thermostat. Has failed two times. I have to pay for a new one to be mailed and for repair. A bad product from all the reviews. Honeywell is claiming they do not service it anymore and gave me a Sears telephone number. Servicemen have said it is a crap product and fails all the time.

I have a cabrio washer which is the worst washing machine I have ever seen. I can wash a small load of clothes and the ones on the bottom dont even get wet after being in the machine for 60 minutes. I have tried setting it to heavy loads, added water, stopped the machine and redistributed the clothes, it was a total waste of money. Dark colors come out looking worse than when they went in. If I save money on water I spend twice as much on electricity because I have to wash everything twice. The store where I bought it went out of business so I have no recourse.

I bought a new washer thinking I was upgrading. Wrong!! Well the new so called technology they put into these machines is overrated. They took a good thing and instead of advancing they have took two step backwards in time. I wish I had kept the old washer I had. I think I would rather use an old time wringer washer my great grandmother used. They are probably faster by hand. This new Whirlpool grabs every string on my hoodies and twist my clothes so tight in knots. I cant even remove my clothes until I fight and get mad enough to write a review. Whats up with these new washers?? Get rid of the slots on the Agitator!!

I purchased a Whirlpool French door refrigerator model # gx5fhdxvyo4 in June 2011. Four months ago, ice was forming on the bottom of the freezer. Repair person replaced a clogged plug leading to evaporation tray. Its March 2013 and repair person now has to replace evaporator motor part # W10128551. I contacted Whirlpool and was told the warranty has expired (one year). This repair will be around $175. How can I trust a Whirlpool product in the future?

I bought a Whirlpool wdf760sadmo. It was Oct 2014. It broke 31 days later. Lowes said they would not take it back. Called Whirlpool, they sent a repairman out a week later. They ordered parts and came back two weeks later. The parts were not the correct ones. Ordered more parts. This time back in a week. Ok about three weeks have gone by with a broken dishwasher sitting at my house. Got it fixed. A month later a different problem. Call Whirlpool, wait, on hold for about 20 or 30 minutes. They sent a repairman out who ordered more parts which will be in in two weeks. Meanwhile I am without a dishwasher again. I have had to take a day off work each time they have came to repair it. I have spent way too much time on this thing. I wont be buying another Whirlpool.

It is a really great microwave, but the door is falling off of it. We can still use it, but try to be careful about it. I honestly and truthfully love my whirlpool microwave as well as my whole set of whirl pool appliances. The door is trying to fall off, but we can still use the microwave. If we get another one we will probably get another whirlpool because I love it so much.

My 2010 Whirlpool refrigerator stopped working, due to a compressor issue. I need to purchase a new device ASAP.

I bought a Whirlpool washer in Aug. 2015. At the end of September I had to call and get a repair man to come out twice because my clothes got stuck way down under the agitator. Not only that, but it does not clean my clothes well at all. I am really dissatisfied with this washer!!

After being a faithful Whirlpool consumer for years... I no longer have any faith. I purchased an entire kitchen suite. The side by side refrigerator Nov 2013. The first refrigerator was delivered with the side cabinet deeply dented in several areas. Another was delivered 4 weeks later. Silly me... I thought, Okay, no big deal... what could go wrong? I didnt take time off work again to receive the replacement. My son took delivery (never looked at it). I get home... the front of both doors looked like they had been kicked in all the way across! To add, the cabinet sides were textured (not smooth like what I ordered) and the door handles didnt match the other appliances. So, I called HDepot & called Whirlpool (only to be on the phone an hour each time due to high call volume. Imagine?). Then Whirlpool reps are talking to me like I am some sort of idiot... saying that the refrigerator was EXACTLY the same... not possible that the handles or sides were different!!! Because it was damaged (and I mean ridiculous! ) another 8 weeks for a replacement. Frig #3 arrives and I take time off to receive it. Ah, the right refrigerator... but again ~ handles dont match. Not POSSIBLE.. Ms. _ _ _ _... it is the exact refrigerator, those are the same handles. Hours and hours on the phone to HDepot and Whirlpool. Finally, HDepot rep has a WP rep at the store when I call, and bingo! Oh yes, there are two styles of the Exact same model. The handles are ordered... 10 weeks later I finally have matching handles! But, wait... gets better. The fridge has been loud from the start, CONSTANTLY running but, not cooling some areas and freezing in others. Then when you open the freezer it is like a burst of winter wonderland is unleashed in your face. There are sheaths of ice building up on the top of the inside door. Hmm, I think what is going on? The Whirlpool designated repair company comes out. Ah, well here is part of your problem. When the refrigerator was being put together they left a few thicknesses of blue packing tape between the door and the rubber seal in the freezer. The rep tried to fix it to no avail because the door was also warped. First they were going to replace the door. Waiting for another 10 weeks. Nobody calls, whats going on? Oh, never mind, or rather... that was never happening. I have spoken to many reps with Whirlpool, I have been polite with all. In turn, from most I get curt hard ball back. The offers to resolve this from Whirlpool have been ridiculous. I am sorry for my loyalty to Whirlpool, as it has not been reciprocated. I have had two more deliveries - both the wrong unit! I never thought there were others out there. What a mess. They should recall.

The Whirlpool side-by-side had the space and durability we had hoped for in the price range we shopped in. It lasted longer than the refrigerator it replaced.

The duet washer is just over one year old and started showing F25 code on screen. It had been making a really loud noise in the spin cycle. Last week, a really loud noise and then the loads wouldnt be spun. There was a puddle of water on the floor near the machine. We had a repairman out today and he stated that theyre repairing these machines all the time. He stated it was the bearing and that theyd been told that Whirlpool had installed bad bearing from a different supplier. I called the Whirlpool experience and after 4 minutes and 19 seconds, I actually spoke with a service rep. She said since my machine is less than one month over the one year warranty, Id have to call the extended warranty people. I asked for a supervisor and after 2 minutes and 38 seconds, she came in line and wouldnt budge from her story. They also stated that there are no service issues with this model washer. Extremely poor attitude and Whirlpool is doing everyone, whoever purchased a duet washer, a terrible job on these washers. At least, Ive now found out that there are a lot of other folks out there with the same problem. We need to get some attorneys to start a class action just like the mold/smell customers did already. Sad, sad day for Whirlpool as Id been a customer all my life.

We bought the Whirlpool Duet set for $1,000 18 months ago. About four months ago, it started shredding our clothes. I would get them out with holes in them, but there was nothing sharp in the washer. Then the grey outside seal started deteriorating and getting tiny balls of rubber all over my clothes, ruining several white shirts. It always smells like mold. I just went to get my clothes out of it to find out it leaked water all over with that disintegrated rubber from the seal. The seal had completely ripped from the top to the bottom drain for no apparent reason. Now we are replacing the below. We JUST paid it off this month. It is crazy, it is already breaking!

First time owner of a Whirlpool range and will be the last time. Nothing but junk! I liked how the top grates were and electronic ignition. The knobs turn too easy and often when bumped will turn gas on without igniting. Very dangerous. The oven grates guides rusted almost immediately making it difficult to pull racks out. The oven light works sometimes. The glass on the oven door at the bottom came unglued. The bottom door under oven is a total waste. No use for it. In my adult life I have had different brands but this is the absolute worst and will never recommend this brand to anyone period.

I just bought a house with a Whirlpool Accubake wall oven and after I did a self-clean, the oven quit working. It goes through the motions of working but neither element heats up. After replacing the elements ($95), I am going to replace the thermal fuse to see if that cures the problem. Whirlpools automated Customer Service phone service sucks. You cant talk to anyone about troubleshooting any problems so you spend money until you eliminate all possibilities.

Whirlpool accubake slide in gas range - After using the auto clean button on the range, the digital panel will not work and the oven door will not open.

I am very very unhappy with Whirlpool gold series. We paid more thinking it was better and dont waste your money. I have had the whole package for 3 yrs and every one has broken down. First my dishwasher wasnt cleaning. I had to take the thing apart and clean all bars and still is not cleaning right. My ice maker quit working and then started leaking under fridge. I had to have the water intake valve replaced. And now my oven says its at 350 and wont bake anything. I think the element has gone bad. This is complete junk. I should have known better and got LG.

Avoid Whirlpool at all cost. I have had the GSS series, which was horrible. It was declared unfixable by service after 2 weeks of ownership. It was replaced with a similar WP model WS series and was told it was basically identical to the GSS series except for some cosmetic differences (They do look identical and yes, it’s just as horrible as the GSS.). The first one was defective from day 1. It was replaced and assured the next one would be thoroughly checked out prior to delivery. Obviously, nobody did this (was still in box and never opened). The fridge arrived and had the same exact defects as the previous units. Service literally said these were junk and they had nothing but issues with them that they simply cannot fix, and issues Whirlpool is obviously aware of but will not admit to, nor back up their products. Service literally told me to avoid WP at all cost or I will have nothing but non-stop issues and non-stop service calls and the fridge will still not be fixed. I purchased the extended 5 year warranty that clearly states that the fridge will be fixed or replaced if deemed non-repairable. Mine was! Yet, neither Whirlpool nor the retailer will do anything. I was literally told Take it to the dump and go buy a new fridge by both Whirlpool and the retailer. My purchase was less than a year ago. The 3rd fridge has only been here 3 months. They took my $1,500. They took my money for the extended warranty. It has been declared non-repairable, yet Whirlpool’s and the retailer’s response is Too bad, we are keeping your money, not honoring the warranty. We don’t care if it’s non-repairable. Take it to the dump and buy a new one.This is new! The money it cost, the money for extended warranty, the money for lost food, the money for lost wages due to having to be here for repeated service calls, the huge amount of time spent using hair dryers and everything else under the sun (this fridge must be baby sat and monitored pretty much 24/7 due to more issues than I can list). The fact this fridge has taken over my life, with freezer and fridge unusable (totally unusable, it has taken over my life, but I still can’t use it and spend a fortune getting take-out food) is just shocking, but more shocking is the fact neither WP or the retailer (the blue one that starts with an L, ends with an S and competes with HD the orange store) will stand behind the product or the warranty and instead is telling me to flush multi thousands of dollars down the drain and take my new, with extended warranty, to the dump and buy a new one. Calls to both companies only led to more wasted time and frustration.I don’t even see how this can be legal. They happily took my money. They fully explained how I needed the extended warranty in case something like this happens and assured me the extended warranty would protect me in case something goes wrong for 5 full years. They will replace it with a new one if un-repairable. Yet in less than a year, Ive gotten 3 defective ones with the last one only 3 months old with the first service call made on the day after delivery, but I’m supposed to throw all this money down the drain, take my new fully warranted fridge to the dump and buy a new one?!Shocking and not something I can afford to do. If I could afford it, I would get this thing out of my house in a heartbeat and buy something else, but I’m not made of money so this is not an option. Not sure what I can do other than to warn others to avoid Whirlpool and avoid the retailer (L---s). I’m just in shock and to say I’m upset would not even come close to describing my utter disappointment and frustration with both companies and this whole ordeal (never ending nightmare is more appropriate).

We started noticing pools of water on the floor on the left side of the freezer. We would then open up the drawer and it was covered in ice. The water was not noticed until the morning so it has caused damage to the floor and molding in our house that was built in 2012. I called the repair company that I used to have my Whirlpool oven fixed (broke twice). That is when the manager gave me the lowdown on what has been happening with this fridge. He told me to call Whirlpool and have them pay for the repair and part and to research online, that it is a design flaw with the freezer and the p-trap and draining under the ice maker being not efficient.I called Whirlpool and complained. All of my appliances are Whirlpool and I spoke to a Supervisor. They only would not agree to pay for the repair and only will pay for the part (which is only $27.00). This fridge is 15 months old and I am irate at the lack of customer loyalty from Whirlpool. They responded the exact same way when my oven broke a month out of warranty. I will never buy another Whirlpool appliance again, and would like buyers to be aware before they buy an almost $2,000 fridge.

Moved to new house with new Whirlpool appliances, including oven, in August, 2015. I did not cook in oven at all until Thanksgiving meal. Had something spill over in oven. Spillover caught fire. Oven at 350 degrees. Complained to Whirlpool. A supervisor told me that it is normal for spillover to catch fire. They sent out a tech to check oven, and said I would be responsible for paying tech. The tech explained that unlike conventional ovens, this oven has heating elements outside of oven, so to get to the temperature of 350 degrees, the heat at the bottom of oven can get to over 550 degrees. He could not get Whirlpool to replace oven. I didnt have to pay, but now I am afraid to use it. Some of the finish on the inside of the oven was burned away, so it is not like I can trade it in. I feel the oven has a defective design if spillovers are supposed to catch fire while you are cooking, and the finish gets damaged. I will never buy another Whirlpool appliance again, if I can help it.

I have had this Cabrio washer and dryer for two years now and I would do better washing my things by hand. Save water, sure there is none!! I have a glass lid and I actually stood there and watched a cycle and the clothes on top never even got wet!! My whites are now gray!! Called the company to get nowhere. I am going to buy an old-fashioned washer that actually uses water. I tried to be eco-friendly but I dont like dirty clothes!!

Whirlpool/Ikea Renlig dishwasher - Since installing this integrated dishwasher it has continuously destroyed the decorative panel door. On my model (they have recently changed in 2014) the steam exits at the top, this damages whatever it comes into contact with it. Today they are saying that it has not been installed correctly and that it should actually sit out from the countertop, i.e. jut out from the rest of the kitchen so that the steam can vent into the room. The panel should also be lower than the other doors of the kitchen cabinetry too. Hardly integrated and would be a bloody eyesore. I am about to call them back again and inform them that I will be making a scene about this in my local Ikea and with anyone else who cares to listen.

We bought our Cabrio set 2 yrs ago. They have worked fine, until about 4 weeks ago when we begun getting what looks like bleach stains on our dark and colored clothes. I blamed my wife for using bleach or splashing it accidentally. So today it happened again, and no bleach was used or even open near the machine. This was the third load today and the first one was towels, no damage, 2nd load whites and light underwear with some spotting, third load pair of pants and pair of shorts ruined. What is happening?

I had problems with the door closure on day 3 of my French Door Refrigerator Model # WRF560SEY. The flap on the left door that seals them fails to fold back if I open the right door first. Which didnt seem like a big deal until I tried to close them and have to remember to close the left door first or itll bang against the right door and Im afraid itll break that piece off then the refrigerator is worthless. The manufacturer drop shipped a new piece, after several attempts of adjusting the closure, and it still does not work. I have written Whirlpool and am told they have a new door on order but it will take 6-8 weeks, that was in March. Now when I contact Whirlpool no one ever returns my calls or emails. I have had the refrigerator only for 15 months and I have fought with either the store or Whirlpool since the third day of owning it. No one cares as long as the appliance is paid for. I will never buy another Whirlpool appliance.

We bought this 26 cu ft fridge from Nebraska Furniture Mart in April 2017. In November stopped making ice. Was repaired. Now it’s not working again. Multiple enquirers shows this is a common problem with this fridges. I’m debating whether it’s worth the effort to repair it or just put in junkyard. WORTHLESS piece of shiny metal.

Whirlpool Gold Fridge Model GR2SHWXP002 purchased on August 15, 2007 for $1,368.77. Only repair issue so far was water leaking from the Water Inlet Valve Item # 949403. I bought a new part on Aug 8, 2011 for $73.45 and replaced it myself. The plastics on the fridge door have yellowed. No smoking in the house so not sure why the plastic has changed colour??? Would I buy one again?? Yes I love the water through the door feature and the automatic ice maker. 10 years old now and no major problems.

Purchased a Cabrio Top Loading Washer and Dryer 3 years ago from Lowes and our clothes have NEVER even come close to coming clean without spending a ton on stain removing aids, which only work part time. So I approached the salesperson at Lowes and I was informed (after the fact) that the Cabrio top loaders had poor ratings due to the fact the basket only spun 30 times a minute whereas the front loaders spun 300 times a minute. So after 3 years Im forced to bite the bullet and purchase another washer. Ever since they purchased Maytag, their quality control has gone down the crapper. Now Im going back to the old reliable, the agitator washer. Newer is not better in this case.

Whirlpool has always been a quality product in my household. I had Whirlpool microwave prior to the one I recently purchased. It lasted 10 years and was used frequently and always on daily basis. It worked like a dream and I would never purchase any other brand!

My Whirlpool microwave heating plate is not rotating properly.

Whirlpool Gas Water heater purchased from Lowes in 2012. Have replaced two thermal couples and three gas control valves. Will not stay lit! Problems began within six months of purchase. Third gas control valve quit functioning today and Im on my way to Home Depot to purchase a Rheem...Im done with Whirlpool!

Front-loading does not do good job of rinsing. The Whirlpool Duet will not last longer than 2 years. Whirlpool recommends that owners purchase a new washer every 2 years. Whirlpool suggests owners purchase new clothes each week to avoid washing. Any owner would be required to quit their job in order to wash clothes. The Whirlpool Duet front-loader requires 12 hours per load. This means that only 2 loads can be washed in a 24-hour period. Each load requires 10 rinse cycles to remove suds.

Just bought Whirlpool refrigerator, stove, and dishwasher. So far, the icemaker doesnt work and so I have no water or ice in the fridge. After four visits from Lowes it is still not resolved. Going on since 11/16/18. After waiting three weeks, the dishwasher came, and lo and behold - it doesnt work. Now I have to wait for one to be ordered! TAKE A WORD OF ADVICE - WHIRLPOOL ISNT WHAT IT USED TO BE. DONT BUY IT!

I like the looks with brushed stainless steel and black. The most difficulty was getting someone to help get it and load it. But other than that, Ive had no problems with the dishwasher.

Good Morning. We recently built a home with Pule in Nexton, which is located in Summerville, SC. The appliances we chose came with the dishwasher, stove and microwave. Everything other than the dishwasher has been doing great, but as for the dishwasher I am extremely upset...we are newly weds and received two nice sets of glass and at least 12 of them have been broken in the dishwasher. Please advice.

Most dissatisfying experience with Whirlpool. In 2013 I bought a stackable Whirlpool washer and dryer. Everything worked well for two months, and then the washer started having problems. The washer memory board unit (MBU) needed to be replaced. This was done under warranty. One and half years later I started getting the error F07 which means an electrical problem. I called Whirlpool and they told me a technician would cost $85 for a service call. I delayed the call until today.The technician came, did a diagnostic and then advised me that I would need a new MBU. The cost plus labour amounts to almost the cost of a brand new washer. To add insult to injury, Whirlpool advised the service call would cost $89. (They upped the price since my last call.) You can imagine my shock when the technician told me that the $89 covers the first 15 minutes. I paid $133.34 for one half hour diagnostic testing and to be told I need a new MBU which is on back order for at least 6 months!!! My recommendation is - NEVER BUY any Whirlpool product ever.

Whirlpool front loader duet washer WF9400SW01 - I bought this washer brand new in 2007. The rubber ring by the door started to grow mold after 2 years, the washer collects water after wash. Water was dripping down to the drum and sit there. If I forget to check and drain it by turning on in the rinse cycle, it wets the entire floor. And it sounds like a freight train after 4 yrs when it spins. My last washer lasted 20 years and it was a whirlpool top loader. Thought I might get that with this one.. but NOT.

We bought our washer about 3 years ago brand new from Lowes. Like others, I have had problems with holes in clothing and spots that looked like grease. It worked well up until recently when we noticed some brown splatters on the floor. Shortly after it made a loud noise like a plane taking off and the load would become unbalanced. We researched and found many people were having issues with the bearings going bad. My husband was going to order parts to fix it but you have to have a special tool that is expensive to buy... It was going to be almost $200 to repair ourselves! He called a washing machine repair man and he said he doesnt even touch them because the repair wont last. I guess were going to be better off buying a new washer. There really needs to be a recall on this product!!!

This is an AMAZING dryer. Probably the best I've ever used. My husband & I live in a mobile home so our main reason for purchase is the fact it is VENTLESS & it's compact. The dryer is so quiet. You can hardly hear it with a tv going. It doesn't take any more time to dry than another modern dryer. The end result are damp clothes, however there is enough steam and heat left in the bin at the end of the cycle to where if you fluff the clothes they'll be dry in a matter of seconds. The dryer acts as a dehumidifier by capturing moisture from the air it uses. All the features are up to date and easy to figure out. It's worked extremely well since we've had it and I'm happy to say we LOVE IT!

We bought this Cabrio washer WTW6400SW2 several years ago. Immediately after having it delivered and installed, it started displaying an F1 fault code. The main control board was replaced under warranty. It happened again within six months. Another board was replaced. That board lasted another six months. The warranty was up by then, so I used the machine by hovering over it and restarting it every time it failed. After two years of this piece of junk, we put it in storage while we worked on the road. It was brought out on 10/01/11. I called a repairman (who came on 10/04/11) to come replace the board again. He told me that the last two times it had been replaced with the same defective board, that Whirlpool had never fixed the problem. He claimed he had the new improved board, which he replaced for about $350. Two days ago (361 days later), it went bad again. The same repair company came back and said it was the board again. I just tried chatting with a person working on the Whirlpool website. They (of course) said they would do nothing about the washer. They do not stand behind their product, obviously. Does anyone know of a class action lawsuit over these washers? It is a ridiculous amount of money to spend for a product that does not work. This is just wrong!

I bought a Whirlpool dishwasher in 2008 from Best Buy and purchased the extended warranty through Best Buy. First of all, my complaint is not with Best Buy (model # DU1145XTPBA). I have had nothing but trouble with the unit not filling with water, being noisy, and other problems. And then, my intelligence is insulted by these independent contractors, who are supposed to be appliance repair specialists. I found that far from the truth in most cases. They have a list of patented things that the consumer is doing wrong: not having a hot water heater next to the unit, using too much detergent, not loading it properly, and on and on. They must think we are idiots. I always would run the water from the sink till it got hot before filling. And I am a miser so I use less detergent than what the manufacturer or the detergent package says. Anyway to make a long tale short, it started leaking last week, so I assumed the door seal or some other such thing. But lo and behold, the door is rotted out at the bottom. The black finish has bubbled up and the metal is actually rotting away. I am from up north and it looks like my old Chevy 2 Nova rotted out. I called Whirlpool and spoke with several people and supposedly someone in management. They were, of course, sympathetic but offered no assistance or explanation. They offered to send a factory authorized repairman to replace the door at more than the cost of a new dishwasher. Are we that stupid? They never offered me a voucher for a discount on a new unit, which I am going to have to buy. I would not have accepted it anyway, as my last few experiences with Whirlpool have been dreadful. I will never buy another Whirlpool anything. The name used to stand for a quality product that you could depend on. But now it is like most things are offered to the consumer in this throw away society. And as long as we keep buying inferior products and only expecting them to last a few years, I am afraid that is what we will continue to get. Be vocal and let them know how you feel, even though they are probably yawning on the other side of the phone. They are without compassion and could not care any less. They are just looking for a paycheck and have probably heard a hundred complaints like mine, so its water off the proverbial ducks back. But when its their own job in jeopardy, perhaps they will start passing on these complaints to someone who will be willing to listen. Its a very bad experience and I will never buy Whirlpool again.

Two years ago, we bought a Whirlpool gas range, model WFG361LVQ2. The range-top grates were porcelain-coated, smooth and shiny. The range itself has worked flawlessly (Admittedly, it gets only light use in our elderly household, which consists of me and my wife). The only complaint I have is that the porcelain on the grates is failing. On one of the grates, its flaking off where the flame contacts with it during cooking (Photos attached). On another two, the porcelain has developed a surface roughness thats clearly a prelude to same type of damage as the first. The fourth grate still appears to be intact. The differences in damage is no doubt due to the different amount of use that each receives.When I called Whirlpool, a supervisor there told me that grates have no specific life expectancy, and that is true for plain metal grates as well has porcelain-coated grates. She also said that some chemicals can penetrate the porcelain and shorten its life. I told her we didnt use any chemicals on the grates, but only rarely used common kitchen scouring powder, and I cant imagine the powder or the chlorine in the powder could do that kind of damage.When I asked what it would cost to replace the four grates, she said $187. I told her the entire stove cost about $500, and it didnt make sense to pay almost $200 to buy grates every two years for the next thirty years. I told her that the grates on our previous (non-Whirlpool) range lasted the life of the range - about forty years. So I declined to purchase new grates, despite her offer of a one-time discount of 25%. Though the grates are becoming eyesores, theyre still perfectly usable. So Ill hang onto them until I can find some bare metal ones to replace them.

The oven steam cleans the oven but it only cleans the bottom, not the sides, back or door. They dont recommend oven cleaner so how do you clean it? My oven is a year old and looks like its never been cleaned. You would be better off with non cleaning oven and using oven cleaner. It would be less work. Horrible stove.

I purchased my Cabrio Whirlpool washer 4 years ago and have had problems every since I bought it! Thank goodness I bought the extended warranty! The last two repair bills were over $1000 each! My warranty just ran out and I had it repaired last two months ago! This is not my first complaint! When will they start listening to consumers? This is ridiculous! Now I am faced with the problem of just trashing this washer or spending another $1000 to repair it! Something needs to be done! I am warning all of my friends and family and will post again my problems with this washer on all my social networking sights! Whirlpool needs to take responsibility for their problems! I will never purchase any Whirlpool products ever again if they do not assume responsibility!

We purchased a new home in July of 2011 and we paid extra for the upgraded appliance package, which included a Whirlpool Microwave/Convection Hood Combination unit. We have Model # GH7208XRS3. We use the microwave a few times a week and only used the home 6 months each year during 2012, 2013 and 2014, for a total of approximately 18 months. From the very beginning, we had trouble with the microwave control panel turning itself on and the electronics going through various timing and programming functions independent of any human operator.During the combined two-year warranty period from July 2011 July 2013 (the Manufacturers Warranty lasted one year and the Developers extended Warranty lasted an additional year) we had 5 service calls on the same issue. The Authorized Repair Center repairman called the Whirlpool Tech Line while he was in our home and was told that there was a flaw in the design of this model. They replaced the door and then when it acted up again, they replaced the control panel. In Nov. 2012, after the repairman told us the door needed to be replaced again, we asked for a new appliance since we had the same issue repeatedly and they had already tried to fix it by replacing the door and it was still under warranty. We were told that Whirlpool would not replace the appliance until they had tried to fix it three times and we needed to get a new door again. We were told that because it was the same issue repeatedly, we would get a replacement if it still went bad after the warranty was up. So we had the door replaced again, which did not fix the problem.In late 2014, we again had the same issue with the control panel and made a call to Whirlpools Customer Experience Center. At that time, we were told that the warranty was no longer in effect and Whirlpool would do nothing to fix the issue. Even though it was the same issue that they had attempted and failed to fix while under warranty, the company would no longer stand behind the promise of customer satisfaction and told us they will not replace a 3-year-old microwave. When I asked the Customer Service Rep to speak to a Manager to escalate the issue, I was transferred to the Tennessee Office. When I got the same repeated run-around from the Supervisor, Melissa, I asked that Customer Service Supervisor to let me speak to a Manager and she told me she could not give me the name of anyone else to speak with and hung up on me.I am writing to you to express my extreme disappointment in Whirlpool and the products reliability, the way the company has handled fixing the problem and especially in the conduct of the Customer Service department. Whirlpool gave us nothing but a run-around for the years the warranty was in effect, knowing that this model has a design flaw and trying to do band-aid fixes until the warranty ran out. We were told that our only option now is to pay to have the same problem fixed a fourth time or purchase a new microwave.Whirlpool has trained their Customer Service people to be polite but ineffective and obstructionist on the phone and then hang up on the customer when they cannot resolve the customers issue. I believe that Whirlpool should be committed to customer satisfaction and making sure that their products work as intended and fix the problem that was reported while under warranty, even if it no longer in warranty. Whirlpool should be as disappointed as I am that after three attempts the problem is still not fixed and should be committed to customer satisfaction enough to replace the appliance after three failed attempts.

This WP stove is so easy to use a child could do it. We use the built in timer all the time, not only when using the oven but timing items on the top of stove as well. Speaking of the oven, the self clean not only cleans but it leaves the oven sparkling. We love it.

The tub mounts of my 6 years old Whirlpool washer are broken. It’s too expensive to replace. Seems like built in obsolescence! Ive also had mold/odor issues. Finally, I know how to fix that, now this. I just want to warn others, these machines are not designed for the long haul.

My husband and I purchased a new Maytag top load washing machine from Best Buy in May 2017. On June 19th, a month later, as I am washing, all of a sudden the machine dies down. I checked everything from the outlet, the plug to the circuit breaker, and nothing seemed to help get my washer to start up again. Unfortunately I had wet clothes inside and the lid is one of those that locks itself and it would not open. :( I called Whirlpool/Maytag to explain my situation and could not believe that they told me that they only have 1 authorized appliance repair dealer they work with in my area and that they didnt show any available appointments until 4 weeks from now? WHAT? Are you kidding me? I could not wait that long, especially since I had soaking wet clothes sitting inside the washer.I asked if I called someone else myself and have it repaired sooner, would they reimburse me for the expenses. They refused to do that and told me I need to wait for their own authorized repair dealers. Talk about bad customer service here :( My husband called them back and asked to speak to a supervisor at Whirlpool and was told that it shouldnt have to be that long for us to wait for repair so why was I told that in the first place? The supervisor proceeded to tell my husband that we will get a call back in 5 days? ARE YOU KIDDING ME? 5 days just for someone to CALL us? And then have to wait longer to get our service done? No way!We think that Whirlpool sold Best Buy a lemon and we are paying for it! Why cant they say that they will get in touch with Best Buy so they can deliver a new working machine and take this lemon back? We are not happy with their responses so we will be paying Best Buy a visit to see what else we can do. I already spent unnecessary money to go to a laundromat to wash clothes :( I would recommend that people stay away from Whirlpool products. Well see if we can exchange ours for another brand.

We have had our washer just over a year when the plastic hose that fills the detergent tray began leaking. The entire assembly is plastic and poor quality. Whirlpool customer service says since it is after 1 year, that I would need to pay for the parts & service ($489). I would not recommend this machine or anything Whirlpool.

Purchased above refrigerator (WRF736SDAM13) over a year ago and it has been nothing but trouble. Ive had service companies out 6 different times. The doors never lined up or closed properly from day one. The final and last attempt to fix was putting caulk in the seal of the doors!! Left door does not seal properly and moisture builds up on inside. I requested several times for a new one and Whirlpool refused. Also purchased microwave, stove and dishwasher. Microwave went out 6 months after using it. They had to replace a major part. At least they did this at no charge. Just the hassle of having to be home 2 times to meet service tech. WILL NEVER purchase Whirlpool appliances again. Ive been using them for in all my homes in the past. STAY AWAY from this model.

I bought a Whirlpool dishwasher from lowest in May of 2011 and it stopped draining, serial # f11601686. I was told it was under warranty and you sent someone out. But surprise, I got a $129 service bill and it couldnt be fixed, computer board gone and drain motor shot. I was told its cheaper to buy a new one. After 10 months of use, we need a new one. I think you should replace my dishwasher and pay for a service call. Oh, the reason they said it wasnt covered is because they sold me a 2007 model.

The felt drum gasket came off our 6 month old Whirlpool Cabrio dryer purchased through KB homes. When I contacted the helpline on the 16th of May I was promptly set up with an appointment on the 18th of May. On the 18th I called to confirm a time and the company that whirlpool subcontracts in San Antonio, said they had no appointment for that day and the soonest they could get out here was June 1. I contacted Whirlpool to let them know this wasnt acceptable and I received many apologies and I understand how you feels. I asked how is it you have one company in all of San Antonio to service our dryer? Again more apologies. Then I asked since when does only apologizing and saying, I understand your feeling, be the end all of your customer service? No reply to that so I called Sears who promptly had a repairman out to the tune of $200 bucks with my military discount. Never again Whirlpool.

We bought this double oven range and then find that two element cooktop sometime work and sometime do not even the indicator light is on. Please tell me how to fix it. It cause me headache.

Whirlpool model WRF560SMYB04 - We purchased this model Whirlpool in Dec 2015 after having a refrigerator for 18 years with no problems. We started having cooling issues in late 2017 and finally an intolerable fan noise in April 2018. Researched it and purchased a fan. Opened up the freezer panel and found that the unit was completely frosted up to the point where ice had formed around the freezer fan and was hitting the blades. Contacted a repairman who came out and called in the issue to the Whirlpool tech line. He was told that he should check continuity on a couple of wires. If these checked out, the problem was the user interface board at the top of the refrigerator. We purchased a new board for about $100 and installed same. No change. I was now $250 into repairs and no further. We became aware of Whirlpool Service Pointer W10875533A which described conditions that we were experiencing. The issue was a coil thermistor that would corrode (apparently within 2 years) and would not provide accurate signals. Whirlpool also issued an instruction sheet W10902213 Rev A describing how to relocate the thermistor and protect it with foil and tape. My repairman came out, confirmed the thermistor ($54) was bad, replaced same following the Instruction Sheet. We were now out over $300 on a $1000 refrigerator purchased 2 years earlier.Whirlpool issued the Service Pointer (not to consumers, but to repair shops) in Sept 2016 (within our warranty period). We received no notifications from Whirlpool of the defective design. Nor did we receive a recall notice. Moreover, Whirlpool tech group must have known about this issue, but instructed my repairman to replace the interface board. Whirlpool knows they have a defective product out there but are doing nothing to inform the consumer or stepping up to correct the problem. We have contacted Whirlpool to recover our expenses...will let you all know how that goes. Anybody interested in pursuing a class action?

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

I went to get ice from my Whirlpool Gold refrigerator, model GB2FHDXWS, and found it was melted. Light and fans were working. I had to throw out all that was in the freezer drawer. I called Lowes service and reported that our four-month old refrigerator wasnt working. They sent a food claim number and set up a service call. Then, the lady said to unplug it and plug it back in. We had since cleaned it out. I unplugged it and plugged after a minute and it came back on. The Ace service guy called to confirm his schedule. After hearing that it is running again, he said they are computer controlled and unplugging it and plugging it back in reboots it, as you might reboot locked up PC. He also said that since it is now running, Whirlpool wont stand behind a service call. He said wait until it does it again. Now thats just jim-dandy. We have an expensive new Whirlpool Gold refrigerator that has computer controlling that cant be trusted as the control may or may not lock up in the future spoiling the stored food.

Whirlpool appliance suite purchased May 2013. Whirlpool Gold French door refrigerator with bottom freezer, Model #GX5FHTXV. At the end of my kitchen remodel, I was excited to have my new Whirlpool appliances delivered by an authorized Whirlpool installer. When the refrigerator install was complete, I alerted the delivery people the French doors were not aligned properly. There was at least 1/4 difference at the top of the doors. They did their best to fix the problem to no avail.I called the Specialty Appliance store to complain and they had a repair man come a few short days later to examine the issue. He inspected the problem and had to order new door parts. A few long weeks later, the repair man came to install the new parts. Well, to my disgust, the new parts did not fix the problem. This next sentence only refers to the place I bought the darn thing. I then called Specialty Appliance to inquire about returning the appliance and of course they wouldnt take the appliance. Im stuck with it. The workman ship is cheap. The internal drawers are poor at best. I spent a good deal of money on what I thought would be a good product. My previous appliance suite was Whirlpool and I NEVER had issues the 13 years I had them.Whirlpool Gold freestanding double oven gas range, Model #GGG388LX. Problem: oven catches fire while self-cleaning oven. Big problem. Takes forever to get rid of the smell that leaves behind. The range itself has worked well. No issues with cooktop and its easy to clean. The grates dont stay black and look rusted in a couple of places. Oven cooks well as I know how to make adjustments as to not overcook meals.Following cleaning instructions provided by Whirlpool, I wipe out the oven (when cool) after spills if there are any. I thought I would run the self clean since Ive had the appliance over a year to properly maintain it. BAD IDEA. After running the self clean cycle for about 35 min, I noticed fire. Wanting to protect my $60K remodel investment, I quickly cancelled the clean cycle and watched smoke pour out of the top. Not a fun experience. It took about 15 minutes for the fire inside the bottom compartment to finally go out. Wont be self cleaning my self-clean oven again! By the way, I didnt clean the oven with chemicals because the owners manual states not to and I HATE using those chemical anyway. Again, stuck with an appliance I am not satisfied with. Lesson learned? Yes, I will NEVER buy a Whirlpool product again. Kinda wish I still had my old white ones...

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

My NEW Machine Top loader HUGE drum. Have problems with clothes not looking like they’ve even been washed, Spun so hard they are twisted all to heck. And white stuff - my oxy powder maybe? Not dissolved. My old machine was a Kenmore 30 yrs old. Thought I’d be able to trust whirlpool but not sure. Am I missing something in the loading process. Seems to read something bout not Covering the knob on the bottom. Is this true?

Whirlpool should be ashamed for making a terrible machine. It does not get the clothes clean and it is always breaking down. It is not worth the money. I have never ever had a washing machine act like this. I have been RIPPED OFF!!

Model WRS586FIEMO1, Serial # HR50801958. In December ice maker stopped dispensing due to cubes melting and clogging around the auger. After 3 service calls a new door was ordered with a delivery time of 4 o 6 weeks. Have spoken to and e-mailed several customer service people and am told it will be another 4 to 6 weeks. This has happened at least 3 times. In the meantime I must empty and clean the ice bin and surroundings every night or it freezes up and cannot be removed at all. Finally told them I no longer want a new door, I want a different model fridge. Was told they do not replace, only repair. It is now April and they have done neither. They did extend my warranty until December but at this rate that too will run out. Would never buy another Whirlpool appliance or any of the other brands that manufacture.

I am very sorry I bought this machine. CU rated it pretty good. Nope. 1 - It rarely dries everything completely. e.g., the collars of t-shirts or turtleneck shirts are damp after the load is finished. I have to run the machine again....Energy efficient? Energy schmefficient. and I havent even TRIED to use the low heat delicate cycle. 2 - The cute modern buttons are hard to push in. 3 - The top of the machine doesnt have a level lid... Its curved. Not very useful for setting anything on while you work at any part of your laundering process.

My refrigerator is about 7 years old. Has performed great. Good use of room inside. Easy to clean. Bought only Whirlpool products for years however since the last purchase of a range a couple years ago the quality was greatly diminished. May be changing brands now.

I purchased a Whirlpool range from Lowes for $750.00. After 13 months, the digital circuit board went out and cost $580.00 to repair. I thought this was odd since the range was fairly new. The service tech said the boards are a common problem. Two years later, when using the self-cleaning mode, the door was locked and the board was out again. So this must be the issue because that is the same problem that happened the first time. This must be a design flaw! The board cannot handle the heat generated in self-clean mode. Way to go Whirlpool, put the board near the oven door where it is subjected to extreme heat and melts!

Whirlpool washing machine has always been reliable for me. I have owned 2 and they lasted me many many years. Its easy to use, and cleans clothes perfectly. My family is also a fan of Whirlpool appliances.

I replaced our old Whirlpool washer that we had for 10 years with a new Whirlpool high-efficiency front load washer in August 2020 - it quit working on December 11, 2020. Got a repair person through Whirlpool on December 22nd who said I need a new motherboard. I am still waiting!!! 42 days with no washer and Whirlpool has no answers regarding the parts arrival and I can’t even sell the thing and get another brand because it doesn’t work! I’m beyond angry!!

So disappointed with my Whirlpool purchase. I will never purchase another Whirlpool product in my life. This is my second whirlpool oven to die in a short period of time. My most recent oven only made it two years. For there to be an internal wiring issue that is now costing me $500 to repair on top of waiting 30 days for them to be able to fix the oven. This is a terrible product. Unfortunately, I didnt realize the poor quality and poor reviews prior to purchasing from this company. PLEASE be advised.

I hate my Cabrio units. Dont waste your money on these machines. I stay frustrated because I have to work so hard doing my laundry. Clothes not clean, laundry liquid on clothes, parts of clothes not even wet, debris left on dark colors from spin cycle, lint all over dark clothes from dryer! Mad in Texas.

I purchased a replacement gas range (whirlpool) approximately 3 years ago. Its not the top of the line, no bells or whistles such as a self-cleaning oven or such. I did love the three huge grates on top, one which is interchangeable with a flat grill. If it only worked it would be a decent range. The center oblong burner struggled to ignite in full from the beginning. Often, I light the thing with a grill lighter. But the thing that pisses me off more than anything is the F2 error that appears 70% of the time on the control panel when I am preheating the freaking oven. I am NOT replacing the control panel on a $400.00 range. What I have discovered is I can hit off my power at the main, not once, but 2-3xs and reset or over ride the damn thing. I read this F2 code is a common occurrence so I got to thinking, why? My conclusion is the heat from the oven is vented up & directly on the control board panel. Really now, whos bright idea was it to expose a control board to repeated temps of 350+? Hate this appliance. Next range will NOT be a new one, Im looking to replace this junk with something mom or grandma had that lasted decades, not a couple years. Shame on you Whirlpool for producing such low quality, disposable products. By the way, I just went through this with a new fridge so theres much to be desired with new appliances. Theyre junk, designed to fail.

It gets the job done. Its no power washer, but the dishes get pretty clean and dry nicely. I have no idea how dirty the dishes can be and still get cleaned, since Im weird and pre-wash my dishes. Its stainless steel and black, and has quite a few wash and dry settings, including an option for heated or unheated dry. The utensil rack is attached to the door of the washer and cant be moved. Two levels, and pretty easy to do dish tetris with. No offense to most standard dishwashers – I need a washer about 3 times the normal size due to a passion for cooking. Its slick and matches my ultra-modern, borderline-Swedish interior.

I have purchased in the past all Whirlpool appliances all at the same time. Washer, dryer, dishwasher, refrigerator, stove, microwave and I have had issues with every product after the first year, from plastic parts failing. That should have been made out of metal, to motherboard replacement. I work Hard for my Money, and when I need to buy a new appliance, I want truth in advertisement of what I am spending MY MONEY on. I would like a product that is built to last!!! If whirlpool cannot offer this we need to COMPLAIN all over the Internet until whirlpool changes their design and uses better parts for their products. I as a consumer deserve this.

Does clean well but I notice that even on heat drying there is still water on the inside of the door when I open it. I have loaded it up and even the glass baking pans came out sparkling. I would recommend this middle of the road priced dishwasher.

I bought this washer (model WTW7800XW) on 12/23/2010. Never happy with its performance from the beginning. Within the first 18 months, the lid hinge completely rusted and broke. The repairman stated that the hinges and glass lid would need to be replaced at a cost of over $400. We paid $899 for the washer. Instead of paying that much, not knowing if it would only last another 18 months, we removed both hinges and removed the lid manually to use the washer. After complaining to Whirlpool about the problem, they thanked me for the info so they could use it for the future. The latest problem to arise is the light inside the washer. The mount for the light was made of steel and has completely rusted away, so the light is just hanging inside the washer. Whirlpool needs to step up and resolve the issue with an extended warranty for these machines.

We purchased a WRF989SDAM03 model French door refrigerator in September. A month later it began to make grinding noises when running. The noises got louder until it sounded like a car idling. We called for service, and the technician diagnosed a failing compressor. They replaced the compressor with some difficulty. Three days later we lost cooling. They replaced the compressor again. Now the refrigerator cools, but it runs 100% of the time. I dont mean frequently, I mean it NEVER. SHUTS. OFF. Its never not running. Today a technician came out, and after 1.5 hrs of diagnostics on the phone with a Whirlpool engineer, theyve declared that it works. Whirlpool refuses to honor their warranty and says that because the unit cools, I should accept that it runs 100% of the time. I can get no resolution from Whirlpool.

I purchased the refrigerator (WRT3L15ZYBOO) from a reputable store (Lowes) on 10/15/11. 15 months later it failed. The service tech diagnosed complete loss of refrigerant. Cost for repairs would be more than half the purchase price and the wait for parts would be weeks. Contact to Whirlpool customer rep (Brittany) said no assistance was available, even for obviously a defective product. Solution: I had the store remove the defective appliance and purchased a new fridge (not Whirlpool) at about the same price it would have cost to repair the defective one. With delivery within 3 days, I likely saved time and money over dealing with Whirlpool. I had purchased a Whirlpool stove at the same time and am feeling quite anxious about it. Consequences: I plan to purchase a washer/dryer in the next year. No Whirlpool products considered.

Ive had the WDF510PAY dishwasher for 3 years and the circulation pump broke. To be more specific the impeller inside the circulation pump warped and then basically got lodged because it became oblong and then it wouldnt pump water to the spray arms etc. I bought a new pump because the warranty only last a year. The pump cost around 90 bucks. After not even 1 full year this factory replacement pump failed again. I reviewed other Whirlpool dishwashers more expensive and I found they all have this same junky circulation pump. Im not sure of a better dishwasher but I would never recommend a Whirlpool dishwasher again. They also use the same circulation pump in Maytag and many other brands. Whirlpool or whoever designed and sold this pump to Whirlpool should be tracked down and beaten. Simple products like dishwashers should last more than 3 years. The technology is nothing new. A product should last 10 years at least.

Whirlpool W8RXEGMWQ01 leaks - It looks like the seal is not tight around the freezer box. They blamed it on my floor but I think its because the door sags. The door needs to be lifted about 1/2 to fit snugly into the freezer box opening. They came out three times but couldnt fix it, then they said it was my fault. Then I finally gave up.

Purchased a larger hot water heater after reviewing the offerings from the big box stores. Obtained a 40 gallon Lo-Nox type. No problem. Found that I did not have time to install and 3 months later had a company install for almost $300. Within the first month the pilot went out at least 5 times. Had the install company come out and take care of the problem. Worked OK for 2 months and now the pilot light goes out again. Watched the flames myself and find them to be yellow. OK, so try to see what the situation is, call the installer, then call technical support. I am in a basement, on a cell phone and the representative basically has zero patience, zero tolerance for questions, treats me like an idiot and probably has never looked at any of the guides but keeps harping on me.I asked 5 times for patience and guidance not to be treated like an idiot. As time went on it was clear that the representative has zero experience in front of the product or the information in the install guides. She kept calling it a manual and I tried at least 3 times to ensure that her manual is the install guide. She never did affirm. I stated I wanted my money back and she stated no. Whirlpool has a very skillful representative to keep consumers away.However this consumer is a small apt owner that purchases appliances, as well as hot water tanks microwaves etc. No longer will I purchase anything Whirlpool. Oh I will send a complaint about this rep, and she said thats fine send it to the PO box Total lack of product knowledge and not even skillful in a conversation asking for assistance. The installer also stated that this product has horrible reviews. I wish I had seen them before all of this. Total frustration and something unwarranted. I am out $900 and am replacing the tank with a Bradford white from the plumber. Lesson learned. Good bye Whirlpool, hope others stay away from Whirlpool everything. Choosing another brand is the only thing that makes businesses wake up and smell the money.

Less than 2 years after we purchased our whirlpool dishwasher, the rack started to rust. Now the tines are so soft they fall off. The last time we bought a dishwasher the Same thing happened, but after 15 years! They dont even have an option for that to be under warranty so it tells me they dont stand by their product. I will never buy whirlpool again.

Just bought the Whirlpool 3.5 cu ft, Top Load HE washer (model WTW4815EW), but of course, the sales person did not explain that HE meant LOW WATER USAGE. Wish I had done my homework. FIRST LOAD, clothes seem to be beaten to death, and must pour in detergent before you load clothes. So, Oxyclean detergent I always used in my regular (NOT HE) washer put a hole in one towel and discolored (faded out) the others. Also seems that the fast and hard agitator would not (logically) last very long. It seems to be working very hard. Im SO disappointed. Called Whirlpool to say I dont like it. They said to call Home Depot and see what they will do about an exchange. When I did, my sales person said that almost all the washers he sells are HE. I want the old type washer back that allows me to add more water if I want, change the cycle and water levels at my discretion, add detergent when I want to, and soak clothes if I wish.

I purchased a Whirlpool French Door refrigerator (G16FDRXXY07) from h.h.gregg appliances and electronics in Columbia, South Carolina, on August 3, 2012. It was delivered and installed on August 11, 2012. It functioned well for three weeks, and then temperature of refrigerator dropped to 25F. Vegetables and eggs got frozen. I made a service call to Sloan Appliance Service as soon as I was aware of the problem. In the 3rd visit, the thermometer was replaced after troubleshooting. After replacing the thermometer, the temperature of the whole refrigerator got higher than it was supposed to be. Refrigerator got around 53F, and freezer got 34F. All foods in the refrigerator got spoiled. In the past six weeks, the company sent technicians to my house to check the problem, and they tried to fix this refrigerator for 5 times. The situation got worse and worse. I have not had a functional refrigerator for 6 weeks. A technician came with a compressor on 10/22/2012 to see if replacing it could fix the problem. When he cut the copper pipe, he found that refrigerant was leaked out. There is no refrigerant at all. He refilled refrigerant without changing compressor. Because he thought the leak was slow, it should be caused by the evaporator. He thought it should work and last long enough when a technician comes back with evaporator replacement. It turned out what the technician thought was wrong. The temperature of both refrigerator and freezer did not drop to normal, 53F/34F. The problem persists. I called Whirlpool customer support line several times. The response I got was that Whirlpool would not replace for having manufactured a faulty appliance during manufacture warranty. They can only keep sending technician onsite to check and repair. For 6 weeks and 5 times onsite visits/repairs, this newly purchased refrigerator still does not function.

All of sudden, this expensive microwave stopped heating. Called whirlpool, they said they will charge $300 to fix it and $540 to replace. So much after paying new piece of garbage in 2-3 years.

In 2006, I paid $1,300 for above fridge and bought extended warranty. Within a year, I had four service calls for condensation in bins that causes freezing of lunchmeat, veggies, etc. and anything put in them. The A&E service company said to use plastic bags and then said I should keep the bin drawers open at an inch so air could flow. Next call said vacuuming underneath would solve it. Final call said again to use bags and suggested modifying the fridge by making a hole in the sidewall (which would nullify the warranty).Since I declined modifying the fridge, he contacted Whirlpool saying I declined service. I still have this problem, was going to call for service because I could really use the space the drawer provides but I have a feeling I will just be throwing money away. I was going to contact Whirlpool but Ive done that too. I feel totally ripped off on an item that should have quite a few years of service left.

I purchased a WhirlPool dishwasher in 2016. The primary motor had to be replaced in 2018. WP paid for the part; however, I had to cover the labor, which was expensive. In 2019 the drying element broke. Again, WP will replace the part but leave me to cover the labor. Ive decided to purchase a new dishwasher (none of the Whirlpool brands) with a 5 year warranty. I will never purchase another WP product and recommend everyone avoid all of their brands. Heres the list of brands you should avoid. https://www.whirlpoolcorp.com/brands-we-love/

Works fast and quietly. Easy to set up. Get the geek squad coverage and clean the filter at least monthly.

If I could give no stars I would. I own the Whirlpool Cabrio, which I bought only 2 years ago. Im on my 3rd service call. They replaced my board after only 1 year of owning it and now 2years later its the same error message (F6E2), the board again. Besides this problem the machine is horrible! Every load has to be done on the deep water mode or else your clothes will come out with dry areas. Forget about darks - they come out with lint and soap residue all over them. So for darks you have to use extra rinse cycle but still the clothes come out with lint all over them. Laundry has turned into a nightmare for me. And the clothes arent clean. If I dont spray and scrub any stains, the clothes come out with the stain still on them. Dirty white socks come out dirty, even with bleachI dont use warm water on my clothes because it shrinks them and I dont put all of my clothes in the dryer because it shrinks them. So I am constantly using lint rolls, like crazy on all my darks. And even though the machine is very large I was told to never put a lot of laundry in it because nothing will get clean. So now I have to do more loads of wash. Doing laundry has turned into a job, a horrible job that takes hours. So now I have to use deep water, extra rinse and smaller loads so how is this energy efficient - its NOT, its the opposite of efficient. I am doing more wash and using more water. I use liquid HE detergent like they said. I clean my washer when it lights up to clean it. I dont know what else to do. I just called whirlpool about all of this and my second board being broke within 2 yrs and they dont stand by their products. I have to just keep getting it fixed through my extended warranty company. Thank goodness I bought an extended warranty.I would never ever buy anything whirlpool again! Dont buy this washer if its still available, it is the worst. Even if cabrio isnt available (which I dont see on their site) I still wouldnt buy whirlpool. They should replace my machine with a different one at this point. Not that I want another whirlpool but at least I would have a machine that works. This machine completely stopped working after the error code so I have no machine for 4 days now. I waiting for my extended warranty to get back to me and then I have to make an appointment for the appliance company to come and fix it. This is crazy. All these days and I cant do laundry. This is not acceptable!

We bought a Whirlpool side by side at the end of August 2017. In March of 2018 - the day after I got the letter about extending my warranty - they had to replace the diffuser - it was making a horrid noise and freezing my eggs and milk. This part went again in July. I insisted they extend my warranty which they did - until March 2019. The part went again in November. I again demanded an extension - now it is guaranteed until June 2019. I asked about replacement and was told that as long as it was reparable they would not replace it. This part is dying every four months. The first few times I called, the hold recording touted a repair app - that did not give me much confidence in the company.

I have automatic Whirlpool washing machine since 3 1/2 years I am using. Now 2 times electronic board came problem so how many times can change like this? Why they are manufacturing if they cannot solve this problems? Should not sell in the market. This all not coming free and need to struggle. Whirlpool products all very bad appliances.

I bought a Whirlpool Cabrio 2 years ago and until last week it was fine. We got an error message that said we had to call for service so we called a local whirlpool repairman. The repair guy told us it was the control panel and it was going to cost between $400 to $500. He also said that he works on a lot of whirlpool washers and this is the first time he saw a machines control panel fail. He recommended that we call Whirlpool.I called Whirlpool customer service and after waiting on the phone for 40 minutes I was quickly transferred to customer resolution and was told that since I hadnt purchased the extended warranty there was nothing that they could do for me. I kept asking her, There is nothing that you can do to help me? And the consistent answer was no. I will never buy another Whirlpool appliance. This has been so frustrating to have an appliance that looks brand new and wont work. The manufacturer wont even try to help with fixing the problem. Amazing AWFUL CUSTOMER SERVICE.

I have a Cabrio washer displaying the F-1 error code. I called on Thursday, the 15th of Sept. I spoke to Vicky in the Cleveland, TN division. She told me that the F-1 code on my machine (model no. WTW6600SW2 and serial no. **) was covered under a recall at no cost, parts or labor (I specifically asked this question). She set up a service repair ticket with Freds Appliance at 888-453-7337 and gave me the date. I was home waiting when they called. The driver drove in the drive and asked if he was there for my Jenn-Air cook top! I said no, the F-1 error code on the washer. He explained that he had just used the last control board last week and he changes them frequently. I called Whirlpool. A very snotty Ashley proceeded to tell me that nothing was covered and I would have to pay. I asked for a supervisor and Ratna answered after a hold of 45 minutes on my cell. I explained the situation. After begging, she proceeded to tell me that she would pay for parts only. I explained that the tech did not have the parts, didnt even know the correct appliance, and now I have to take another day off work to meet him to have my washer fixed. I have not used the washer in two weeks. I used to only buy Whirlpool products. After reading all the complaints about the same error code from other consumers, I believe there are enough complaints that we as consumers should be protected.

These reviews re Whirlpool washer proves I can no longer trust Consumer review. This washer is junk. Does not clean, Takes over an hour to not clean your clothes. I have to add water to cover the clothes. They come out as dirty as they went in. Want an honest review? Check out the ones on Amazon.

March 1, 2016 I purchased a new Whirlpool dishwasher model WDF320PADW2. After just over 1 year of use, the unit quit. The pump only runs in the empty direction. It quit in the wash direction. Hums and smokes. This is not acceptable for a appliance to last just one month past warranty then totally quit.

We purchased our Whirlpool french door refrigerator with bottom freezer, model number WRF990SLAM02, from Lowes in August 2013. In November 2013 we noticed a pool of water on the floor, resulting from what looked like a leak coming from the ice maker. After contacting customer service, they sent a repair company to service the fridge. This rep stayed no longer than 5 minutes and barely looked at the appliance. He said this is a known issue by the company, they have since implemented a fix in the newer models, and it just needed one replacement part and would be good as new. It did NOT fix the problem, it continued to worsen to the point where the freezer is no longer working. I have a freezer full of defrosted food that is not safe to eat. Whirlpool finally agreed (after 3 months) to send another repair company to look at the fridge. This rep took over an hour thoroughly examining the appliance and concluded that it could not be repaired and would need to be replaced; otherwise, we could expect the same issue to keep recurring. Whirlpool did agree to replace the fridge, but has not been able to provide a timeframe. I was contacted by a representative from the product replacement line named Alisha, but she has never answered her phone I have returned her calls. I finally got a representative on the line who informed me I need to wait until I get a call letting me know the replacement product is in-stock. That was 3 weeks ago, and this morning I woke up to a huge water leak coming from the fridge. Whirlpool has deflected the issue off to Lowes, where I purchased it, and said they will have no further contact with me regarding the appliance. I will NEVER purchase another product from this company again. They seemingly left a faulty product on the market and failed to inform me about the known issue. Then they failed to quickly provide needed repair or replacement in a timely manner. They also refuse to reimburse me for the food loss, which would not have ever occurred had they handled the issue appropriately from the beginning. TERRIBLE company.