We purchased the WRX988SIBM00, delivered 6-26-14. Immediately upon plugging it in, we noticed a seemingly loud hum to it. Thought maybe it would go away once the fridge cooled off, but the hum continues. SO sad because I love the features.

We purchased a Whirlpool Cabrio Washer and Dryer in 2007. The washer sounded like it was going to take off and started leaking water. Two repair techs later, we found out it was the center bearing. They actually laughed and said they saw it all the time. It could be replaced (you need to replace the whole drum) for $300-$500, but I was told it would never be the same. I spoke with Whirlpool numerous times and they said they would do nothing, and I should have purchased the extended warranty. All I ask is for a company to stand behind their product. Im very disappointed.

We had refrigerator 2 years and compressor went out. Whirlpool would not repair. I will not buy Whirlpool again.

Have had this refrigerator for about four years and its broken down twice. It has rust and stains on the outside which are hard to remove. I have had other refrigerators that have lasted longer and were in better shape.

The price expensive for the quality of the Whirlpool Refrigerator. In some parts looks like unfinished and you can see the glue and inside foam. The space is limited for big containers like milk and the fridge gets full with two bags of chicken breast.

After getting a suite of Whirlpool appliances from Home Depot, I found that they were a little below standard to previous Whirlpool we’ve owned. I found the top of the Electric stove could be easily scratched and the refrigerator was noisy. The stainless steel seemed not as heavy as our other ones. The Whirlpool insignia on the refrigerator came lose and I needed to glue it back on. I’ve always had good luck with Whirlpool and we’ll see how this goes. Just to be safe we bought an extended warranty on the fridge.

Model CAE2745FQ0, Serial #C72680766 - Purchased this coin op clothes washer 2/2/2018 at Brandsmart, Deerfield Beach FL. Would not empty or spin correctly; 1st service call 2/28/2018. (Less than 30 days from purchase date). 3/21/2018 called Whirlpool again as same problem continues (as listed above). Washer is not being overloaded. Whirlpool repair visit scheduled again for 3/23/2018. This is the 2nd repair time since we purchased the washer on 2/28/2018. Purchased the same model 2 years ago, and experienced repeated problems to the point where we got rid of that machine and purchased the most current model referenced here. We are looking for a full refund of the purchase price as it appears that this recently purchased machine is on its way to be a repeat performance of the 1st machine that we got rid of (that was purchased 2 years ago). Again, we want the full purchase price refunded, which is $900.88. This machine is not even 2 months old. Thank you.

I purchased this machine about a year ago and it is the biggest piece of garbage on the planet. The biggest problem is that it will not spin if the load is even slightly unbalanced. It does not clean the clothes. If you try to rebalance and spin the load, it adds more water and then gets stuck in a cycle where it drains and adds water forever. Do not buy one of these. I am finally surrendering and buying a different machine. A total waste of money.

The pilot of my Whirlpool hot water heater (model FG1H5040T3NOV) suddenly went out and I called in a plumber to check it out. He managed to restart the pilot and we had hot water again, but it went out again within 12 hours. He mentioned that I would most likely need a part called a thermo coupling and I should start looking for it. Well, I found this site and read one of the positive reviews that provided the WP toll free number, so I called. Talk about great customer service! Ben was amazing – he took down all my info and was very helpful. Even though the warranty expired years ago, he overnighted me the replacement parts I needed at no charge. And there’s no charge for shipping either! My plumber is completely anti-Whirlpool HWHs and now he will change his mind when I tell him how efficient they are. I also hope he doesnt charge me a bundle to install the replacement part.

My wife and I purchased a new Whirlpool Cabrio Washer / Dryer set approximately three years ago and have had nothing but problem after problem with these units. Weve had multiple service calls, multiple parts replaced, and after dumping hundreds of dollars into repairs and service calls (even called Whirlpool and asked for some help with parts cost but was given the cold shoulder and was told, We cant help you), we are dumping these machines where they belong - scrap heap. I will never purchase another Whirlpool product and will tell anyone who will listen what garbage Whirlpool manufacturers are and absolutely pathetic excuse for customer service and the poorest of quality product. Whirlpool will never be in my familys home again and will never see another cent of my monies.

I purchased a replacement gas range (whirlpool) approximately 3 years ago. Its not the top of the line, no bells or whistles such as a self-cleaning oven or such. I did love the three huge grates on top, one which is interchangeable with a flat grill. If it only worked it would be a decent range. The center oblong burner struggled to ignite in full from the beginning. Often, I light the thing with a grill lighter. But the thing that pisses me off more than anything is the F2 error that appears 70% of the time on the control panel when I am preheating the freaking oven. I am NOT replacing the control panel on a $400.00 range. What I have discovered is I can hit off my power at the main, not once, but 2-3xs and reset or over ride the damn thing. I read this F2 code is a common occurrence so I got to thinking, why? My conclusion is the heat from the oven is vented up & directly on the control board panel. Really now, whos bright idea was it to expose a control board to repeated temps of 350+? Hate this appliance. Next range will NOT be a new one, Im looking to replace this junk with something mom or grandma had that lasted decades, not a couple years. Shame on you Whirlpool for producing such low quality, disposable products. By the way, I just went through this with a new fridge so theres much to be desired with new appliances. Theyre junk, designed to fail.

Ive had this microwave for about a year and a half. Like some others I get the door sign frequently. I open the door and cant turn it on until the light goes on, which can take a minute to two. I have NEVER had problems with any microwave other than this one. I had a problem with the Whirlpool refrigerator too, which was fortunately still under warranty. I bought the fridge, oven and microwave as a deal. Trust me, there is no deal here. I will never buy this brand again. Lesson learned. Given other reviews, I might just buy another brand of microwave. Worth not having the hassle.

I purchased a Whirlpool Washing Machine in November, 2015 and today, I had a repair person out who said the bearing had ruptured and the washing machine cannot be repaired - 2 1/2 years later. Contacted Whirlpool Customer Service who would do nothing other than try to explain to me that I should have purchased an extended warranty as they could not stand behind the machine past the one year. Would not even offer sending a tech out on their dime to confirm what my repairman had said that this is a failed production process of these machines - it was nothing that I had done caused this issue. But yet they wanted to sell me another machine. It will be a cold day before I purchase another Whirlpool product.I was shocked at the lack of customer service to assist with a situation that both the location I purchased it from and my own repair tech said that they are seeing so often with these machines. I would never purchase another item from Whirlpool again nor would I recommend any of their items. I will go to great lengths to give others the background on how Whirlpool will not stand behind their products, lack of customer service to resolve a situation or can work outside of what is given to them to correct a situation - this is not OK!

Have used washer since 2005. Still runs today. Minor repairs done. Is reliable brand. Whirlpool gold model washer purchased at navy exchange. Will buy another whirlpool again. Have bought other brands which lasted 7yrs and then needed replacing. This whirlpool is the best. Lasted 15 yrs and still working fine doing 5 loads a week.

Whirlpool Gold Series Dishwasher - I wish I had discovered this website BEFORE I bought this piece of trash last year to replace our antique Maytag that ran like a champ for 10 years. But after 10 year the gaskets wore out and it started leaking. Even at ten years old that Maytag cleaned and dried better than this brand new Whirlpool. My complaints are the same as everybody else here. Doesnt clean even slightly soiled dishes and then it doesnt dry any of the silverware, or plastic pieces like measuring cups and tupperware. All are totally wet and need to be hand dried. So, why am I cleaning the dishes beforehand and drying them after??? The only good thing I can say about this unit, is that it is quiet. But, as my husband said, so is a brick, and a brick would be just about as good at washing and drying our dishes. Buyers Beware!!! This is a terrible product. Turned me against Whirlpool appliances forever.

My dishwasher was only 18 months old when the rack adjuster broke causing the top rack to collapse. I researched and was able to order the replacement part which now comes only in metal. (The original Whirlpool piece was cheap plastic.) I spent $40 for the new part and spent several hours installing it without any help from Whirlpool. Then when I tried to use my dishwasher it wouldn’t run. Repair person came out and diagnosed it with a pump assembly failure. Part alone was $222 and it was on back order. Extremely disappointed. I have tried to contact Whirlpool to see if they would at least offer me a discount on the part. Their customer service number is never available. On hold for so long I finally gave up. Maybe I just got a lemon but I will not go with any Whirlpool product again.

We thought we were going to love it. It has two bottom freezers so the capacity is fabulous, but the ice maker location subtracts shelf space. Love the French doors, but we can never find anything quickly. The biggest issue is the popping noises it makes that are sleep stealing in the night.

We bought all new Whirlpool Gold appliances for new house. Fridge stopped cooling within 8 months, placed warranty call, couldnt get to us for a couple weeks (this is in July). Was told everyone was having problems...so sent us a brand new fridge...happy!! Little over a year later started having problems with this one and was told no warranty, didnt transfer to new fridge and no one offered to sell us a new one at the time, so repairs were out of our pocket. Had new condenser installed, still no ice, had circuit board installed, got ice but refrigerator section isnt cooling after almost $700 out of pocket...dont waste your money on a Whirlpool. So disappointed.

Purchased Whirlpool Dishwasher 1 year ago. I use the Dishwasher once a week. When the Dishwasher was originally installed, immediately I noticed when dishes were placed the racks, there is an annoying squeaking sound. I am not exaggerating but the noise can be heard from my sidewalk outside! I called Whirlpool and a technician was sent to my residence. There is nothing wrong with your Dishwasher. I was told to Grease the racks. One year later I still have the same issue! I placed the phone near the Dishwasher to have the Customer Service Rep hear the Loud Squeaking and to no avail. I will never ever buy another product from Whirlpool. Now the latch will not close to the door! I rarely use this appliance, only placing dishes and utensils. No Pots and Pans!!!!! This is going to be another huge bill I will be responsible for paying and I dont feel it is of my own doing. It seems to be apparent that Whirlpool does not stand by their products!!!! I am sure they are aware of all these issues, customers are complaining and nothing seems to be done from reading some of these posts. I am wondering why they are still in business.

We purchased the Whirlpool Duet (front loader) washer and dryer in 2005 from Best Buy. We had many problems with the washer leaking around the front door. After several visits, Best Buy (in 2007) said we could pick out a new washer. We picked out the Whirlpool Cabrio. About 2 years later the mother board had to be replaced on the Cabrio. We are constantly getting F codes and have to unplug the washer several times for it to reset. It also sounds like a plane getting ready to take off and from what I read that repair is very costly. It has been leaking as well. I contacted Whirlpool today and they informed me that there was no recall on the machine and when I told them that there were many complaints for the same issues online, they said they do not base their recalls on blogs and to fix the problem, I would have to incur the cost. This machine is the biggest piece of junk that I have ever owned. I will be sure not purchase a Whirlpool in the future!

We have had a Whirlpool dishwasher for about 2.5 years and have been happy with how it cleans dishes. About a year ago we replaced our counter top and in the process had to adjust the bend in the mountain brackets that attach the dishwasher to the underside of the counter. This requires flexing the thin piece of aluminum at the perforated line. In the process, one of the brackets snapped. The other was barely still intact and broke several months later. I tried jerry-rigging them, but eventually decided to replace them and called Whirlpool customer service to ask for replacement parts.Unfortunately, Whirlpool wanted to charge me $10.50 apiece and another $9.00 for shipping and handling. These parts could not cost more than a few cents apiece. I was shocked that they would charge me $30.00 to replace these flawed parts. Never have I had such and experience with any customer service department. The three people I spoke with were all rude and unapologetic about my situation. Two blamed it on the install...Ive installed plenty of dishwashers and never had any problems in the past. Even if it was a failure on my behalf, the simple replacement of the parts for a reasonable charge would have been fine by me. I told them Id be happy to pay a few dollars and to pay the full shipping fee (which was also high, in my opinion), but they refused to meet me halfway. I can only think that this is part of their business plan...make dishwashers with sub-par parts, and then over charge for the replacement parts when they fail. Well, I re-upped my jerry-rigging efforts and have improved the engineering of the faulty part. Save my $30. But Whirlpool will never again get my business and Ill be sure to steer clients and friends away from this brand as well.

Our Whirlpool refrigerator has been an extraordinary kitchen appliance, it may even be 28 years old. The ice maker worked until just four years ago and thats amazing. Its never been serviced and never needed a repair. I dont know what one can say about something thats worked so flawlessly. This seems a little bit trivial when considering the cost of a new appliance, but the plastic veneer on the handle had fallen off and needed glued back on, but thats about it as far as maintenance and repairs go. Overall its been an ideal purchase and I wish wholeheartedly all my purchases were as good as our whirlpool refrigerator.

The Whirlpool duet model wfw9150ww01 washing machine is a piece junk. After using it for two years, the bearing has gone out on it and it sounds like a freight train. It will cost $600 to repair it. We only paid $575 for it. What a rip off. Whirlpool makes junk only. Buy something else.

I have a small condo and this dryer fit into the appliance closet with a few inches around it. Every home needs a laundry system. I bought the washer and dryer in this model. Whirlpool is great!

Four months after purchasing an $1,800 stainless French door fridge it began to not cool even though it was running. I called and was on hold for 45 minutes, then transferred to a different service company that could only come 3 days later. They were here a total of 3 times and each time they could not fix it. It would run for a few days or weeks then die again. Each time I lost a few hundred dollars in food. Each time I was on the phone for almost an hour, and each time it was days later before they would come. Whirlpool refused to refund or swap out the unit. I would have been stuck if it were not for Home Depot finally agreeing to exchange it for an LG.I have never been so upset with any companies customer service in my 45 yrs. The only reason that I am writing this is because my Sony 65 TV died the other day. It was 6 months old and I called Sony. They answered within four minutes and quickly decided to exchange it for a new one and extend my warranty for 2 additional years. There are still decent companies out there. I will never buy another Whirlpool product again.

Bought it less than 2 months ago. It doesnt wash. It doesnt spend. It works every 2-3 hours if Im lucky. Its the worst product ever. Its not like it was refurbished. It was brand new. Smh. I thought it would save me money by buying a washer. Off to the laundromat I go. I do not recommend this product especially to someone who has a family and on a budget.

My silverware, when it is washed, a piece or two comes through one of the openings in the basket and I have to work it out before I can lift it out of the dishwasher (MOD WDP320PAD50 Serial #F4432749) to put the pieces away. Please update your dishwasher by making the openings smaller for the silverware so I can stop cussing. Send me a new basket when you do. The dishwasher was in a new home I bought.

I have owned a Whirlpool Gold refrigerator since 2011. It has required two repair calls due to a water leak. The company did repair it free of charge on the second visit even though it was out of warranty. It is now leaking again which has caused damage to my wood floor and basement ceiling tiles. I am told that I have pay for the repairs this time even though it is the same problem. I was offered a modest discount to purchase a new refrigerator. I will never buy another Whirlpool product. This refrigerator should be recalled. I recommend GE products. They stand behind their products and they last a lot longer. Shame on Whirlpool! So many complaints with very little response .

Whirlpool washing machine has always been reliable for me. I have owned 2 and they lasted me many many years. Its easy to use, and cleans clothes perfectly. My family is also a fan of Whirlpool appliances.

Whirlpool Cabrio Elite - I wanted this washer and dryer set to be the best one I ever owned. =( It’s the most I ever spent on a set. I am truly very disappointed. The washer, it is twisting the clothes and sheets so bad. My clothes are falling apart a little bit each time I wash them. I tried so hard to load the washer the way they asked never putting in a full load. The dryer leaves things still wet around the corners and edges. Because everything gets so twisted I had to buy a iron and ironing board just to get the wrinkled out. I hate to iron.

I have had my water heater for 5 years and the repair is going to be close to $300.00! Whirlpool offered to send me the part and if I want hot water tomorrow I can pay $30.00 for shipping! $10.00 for standard ground! My other water heater was builder grade and lasted 12 years! Go figure.

We purchased a brand new Cabrio Washer and Dryer in 2008 from Lowes. The salesman at the time suggested I purchase the extended warranty. It was because of the state of the art controls in the machines that could cost plenty if they had to be replaced. I was a bit skeptical at first. After several weeks, I returned to the store and purchased a 4-year extended warranty. This was probably the best money I expended in some time. In less than three years of ownership, I have had to use the warranty twice for the same faulty part (water control valve) that the repairperson told me was problematic. Then after reading the horror stories that consumers submitted to this website, I felt compelled to voice my opinion as well. I have been a die hard Whirpool product fan my entire life because they used to manufacture quality, long lasting products. I am moving soon. And I will have to purchase new appliances for the kitchen. But they will not be manufactured by any Whirlpool company. Shame on you Whirlpool!

I bought a new Whirlpool Top Load Washer four years ago and the paint was peeling off. I called Whirlpool and they offered to sell me a touch-up paint because it was out of warranty. I will never buy one of their products again.

I always seem to get Whirlpool washers. They are dependable but when they break down theyre down and usually its better to replace than to fix it....I would rather have a Samsung product because theyre more modern and have better styles to them.

Bought the model before this just over 2 years. Conveniently it broke just after the warranty expired. I chose not to buy a extended warranty as my last fridge from KitchenAid is over 20 years old and never had a single problem with and still operates like NEW. I can’t say that for my Whirlpool which was very expensive. It has been with an issue within the ice maker for over 8 months. Every computer board has been replaced twice with no fix. Then tried to replace the cooling fan within the ice maker unit seven times. Whirlpool could not find the right part, as the wiring had changed mid model and have no record of when it was changed and what models affected.Certified Whirlpool technician was great and so apologetic. I had taken 7 Mondays off to meet him to only have the wrong part time and time again. Whirlpool support tech line basically said he was wrong, yet I witnessed all visits and my 3 plug fan unit did not match Whirlpools newer part that was 2 plugs. I was not happy missing so much work because Whirlpool is incompetent. Finally my tech ordered a whole new ice maker, including the cooling fan. Lo and behold, Eighth time, parts did not match. He again called Whirlpool tech support and reordered another set one final time. Another Monday to find that this time the parts did fit, but cooling fan still did not work. He called Whirlpool tech support again. They started to trace wires one by one.Whirlpool tech support said it was a bad or broken wire somewhere in the cavity of the fridge buried in insulation and was not replaceable. In other words I have a $3000+ refrigerator that is useless. Whirlpool said they would replace the unit. But when I called, they said since I didnt have an extended warranty, they would prorate it and it’s going to cost me over $1000 of my money to to replace due to a manufacturer wiring defect after only 2 years. What the Heck, I was willing to pay to fix it, but Whirlpool can’t fix it. Don’t buy a Whirlpool product as they are Junk and do not stand behind their BRAND!!! No matter who I talked to, they kept falling back to their word track of it’s my fault I didn’t get an expensive extended warranty, yet they can’t fix a wire they installed incorrectly.Wires don’t just break after 2 years. You get longer warranties for cars for the Love of God. I asked them to just send me the money they were willing to put towards a new Whirlpool fridge, so I could buy a Real Brand that stands behind their products like KitchenAid. Of course the answer was NO. Buyer Beware, don’t buy a Whirlpool anything. Did I mention my Whirlpool certified technician was having a Whirlpool dishwasher issue that Whirlpool can’t fix and that’s his profession. Same type of response. Don’t Buy Whirlpool Products, they are Junk and you will get No support from Whirlpool!!!

I have a Whirlpool refrigerator model number wrx735sdhz and its been a lemon since I bought it. The ice machine totally backs up and the Chute overflows and Im always scooping ice out. Had another technician out today. He saw my frozen sour cream download Frozen pickles and everything else Frozen. Then because I had to have the ice maker replaced in March and it did nothing for the unit he reports back to A Plus Appliance that theres nothing to be done and he says his diagnostic tests come back that it is fine. Im going to post a very negative review about them. Lowes told me that if he would have reported differently they would have given me a voucher and refunded my money. So have another Appliance repairman come in tomorrow.I bought the extended warranty and so far its gotten me nowhere. As many times as Ive had to unclog it and throw away food I could have had technicians out here hundreds of times for this defective refrigerator. Plus on the two service calls I had they said that there has been numerous complaints about this model and the ice maker and freezing over. I have thrown thousands of dollars of food away over the last 2 years. Lowes extended warranty has got me nowhere.

My company purchased a lot of products in Whirlpool company. We thought the product is good, until the dryer machine didnt work all of a sudden. We call a customer service. After a week the maintenance came in our unit to check the dryer but he said that they need to purchase the other part of the dryer. That was happened last july. Were keep calling the customer service. We cant even count how many times we call them. But unfortunately even them they cant give us an exact date when they can fix the dryer machine. SLOW RESPONSE FROM WHIRLPOOL COMPANY!!! Shame on you guys.

I purchased the Whirlpool Cabrio (wtw6600sw2) about five years ago. Last year, the motherboard had to be replaced. This year, it started to have load balance issues on the spin cycle; in other words, it wont spin without sounding like its going to tear itself apart. It cost $75 to have someone look at it, and to fix it will cost almost $400, and whats next? I spent a lot of money for this machine, and Whirlpools answer was to offer me a discount to purchase a new Whirlpool. I called Whirlpool and my model does not have a recall, but models with same problems have been recalled. I will never buy a Whirlpool again!!!

Our recently purchased stove top is an average appliance. The surface is easily scratched just from paper towels when cleaning. Today for no apparent reason the igniters all started firing and continued for a good hour....I would definitely investigate other brands before purchasing again.

I purchased the Whirlpool Cabrio washer and dryer in 2007. They have been the biggest pieces of junk. One year after my purchase, the water pump broke and had to be replaced for $100 and that is with my husband doing it. Then the dryer broke twice. Now, the washer is not spinning. He took it apart and I purchased $80 in parts. It still doesnt spin. He thinks the motor went and it gives a p50 code. This washer does make holes in your clothes. So many of my summer tops were ruined because of this washer. A friend has the same washer and she started getting the holes in the clothes, so that is how we figured it out. Today, I went and picked up a washer at my rental home, a GE that is 10 years old. My clothes never felt cleaner and it runs like a charm. That Cabrio always smelled like mildew because it seemed like all the water didnt drain out of it and it would sit in the bottom. What a shame. Its only 6 years old and I paid $800 for it and for parts. My husband cant wait to put it on the curb on garbage day. My friend warrantied hers and when the guy couldnt fix the problem, they gave her partial money back. At least she got something. These should be recalled and we should get partial money back depending on how old it is. I will tell everyone not buy these. They are the biggest pieces of junk!

WTW8800YWO Whirlpool Cabrio washer, 4 yrs old! Replaced!!! Its a poor quality washer -- the bearings go out. I purchased this washer and matching dryer at Lowes following a house fire. I initially thought the water saver was a good feature. Unfortunately, my clothes were not clean and were covered with lint following each wash. I have had to replace the ring inside the washer due to shifting and causing water damage to the new flooring. I soon became disappointed with my purchase, but until the noise became so loud in the spin cycle and the repair exceeded the initial costs, I kept the washer. I am another consumer who would NEVER purchase nor recommend a Whirlpool W/D. The repairman said, If you want a washer built to last, buy a Speed Queen!

Purchased a new Whirlpool washer and dryer at HH Gregg about 4 months ago. We complained to HH Gregg that the low water washer wasnt working correctly. It will only get about an inch of water in it causing buttons to be torn off... just beating up wet clothes. HH Gregg told us to try a few things. When we went back to HH Gregg with the same complaints they told us it was too late and call Whirlpool. Serviceman came out and said everything was fine with the machine, we just need to load more clothes! We are only 2 people, one of us wear a uniform and needs washed when we may not have a full load. Called Whirlpool to complain again and they said there wasnt anything they would do except send out another service person for a second opinion, which just means taking more time off of work. HH Gregg talked us in to this type of low level washer. We are still making payments on it!!!!

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

We purchase Whirlpool fridge less than a year ago. Its still under guaranteed. 2 months ago we notice the fridge part heating up and food was going off. I went back to the shop where we purchase the fridge. They said we had to contact Whirlpool direct so we did had to wait 3 weeks for someone to come and look at it. Fridge is not repairable. Fella who came out did not report back to Whirlpool. I was waiting and waiting to hear word. I rang to see what was the story on it and eventually they said O we will exchanged your fridge and we will ring you on delivery date. Now Im over 2 month waiting on a fridge. Whirlpool is a joke. The company should be put out of business for what they do to honest people buying their stuff, and people who are in the same boat as me should go to the high court and sue them for all the stress they put people through. Shame on you Whirlpool. Disgrace.

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

Cabrio Washer WTW6600SW1 - We purchased this washing machine back in January of 2007 and have had nothing but issues with it. We thought Whirlpool was an upstanding brand and weve found out otherwise. They havent stood behind their product or the issues we have had along with all the other people. There has been a Facebook page about the Famous F1 error code. We have had numerous other error codes we have had to pay to have someone come out to fix. We paid almost $700 for this machine and have had to pay out several hundred more dollars just in repairs. Not worth the money and the company doesnt deserve to be in business if they dont back their product. I get buying a warranty, but if they are same problem with so many machines, it sounds like a manufacturing defect to me.

I purchased a new Whirlpool Cabrio washer and it has been nothing but a headache. The machine constantly rips our clothes and stretches them beyond repair. Now, the washer keeps showing an F1 error code and I have to restart the machine three times to get it to start. It also stops in the middle of the cycle and I have to restart it. What a piece of garbage! I called Whirlpool several times and they do not stand behind their products. Do not buy Whirlpool. I filed a complaint with the Attorney General and I suggest anyone else having the same problems should do so. Maybe we can get this machine recalled.

We bought a brand new Whirlpool dishwasher around 2 years ago. Within 13 months it stopped drying dishes, silverware etc. I called customer service told the person what’s going on. Of course the warranty was up, a month prior. She said she would send a service technician out to see why it wasn’t drying. They charge 75$ a hour plus a service fee for coming out. I told her no. She said she would drop the service fee since it was only 13 months old. I asked how long he would be here, she had no idea. I didn’t make the appointment because I felt I shouldn’t have to pay anything because it was only 13 months old.She didn’t agree. Since then it has gotten worse, it doesn’t dry anything, maybe the dishes. I have to put the silverware rack on a towel by and dry the silverware or put it away wet. I’ve bought jet dry a few different ones and no luck. I would not recommend anything from Whirlpool, especially a dishwasher. We have new wood cabinets. The cabinets will get soaked if I don’t put paper towels under them. This is the worst dishwasher I ever owned. Don’t waste your money!!

Burners always needed replacing and now do not work anymore - Whirlpool range looks nice, but very expensive to maintain. The burners constantly needed replacing, they do not heat up. I got a repair technician to look at it. He replaced the parts that the burners hook into. Now they do not heat up at all. Well, one of four barely boils water. The oven still works, oh great. The thing is only 7 years old. I have had ovens that lasted 20+ years at my dads house or 15 years at another house I lived in. With all the negative comments and the repair guy who tried to fix it, I think it is time to get the kids Easy-Bake Ovens out of the storage or buy a new range. Obviously, it will not be a Whirlpool. So many negative comments people left, my useless top burners seem mild comparatively.

I have had my washer & dryer about 12 yrs. It has given me great service; however the spin mechanism on the washer stopped one month ago. It was replaced thru my home appliance warranty. I need the front loader style because Im disabled now, and cant take clothes out of washer. My previous set was Kenmore & it lasted 20 years. Looking to purchase in 2 months.

I purchased this washer (Whirlpool Cabrio Model #WTW8000DW) 10-25-17 from Best Buy & now it has no power to the panel at all. The power to the outlet is fine which I can plug a hair dryer in & the hair dryer works. Tried all the reset buttons & options with nothing on the panel working as well as unplugging. Still nothing. It is barely 4 months old & I am very dissatisfied for the amount of money I paid for a high efficiency top loading washer.

I bought an American US Craftmaster water heater in October 2006. I have paid a plumber 3 different times to work on this and the pilot light will not stay lite. I used the replacement parts they sent, followed their technicians directions over the phone, etc. Nothing seems to work. Christmas was not pleasant at my house this year. I’m still taking cold showers.

Purchased Whirlpool clothes washer Cabrio Platinum about one year ago. Never sufficient water to clean items. Appears that there is no way to add additional water to ensure that items are cleaned. Many items come out dry and still soiled.

I have the same problems that all the consumers are complaining about. I have a Whirlpool refrigerator with the freezer on the bottom. I have it for 2 years to date, and it doesnt keep my food cold. I loved the roomy space it had; thats what sold me the refrigerator. If I would know what I know now, I wouldnt have bought it. I will never blame the business that I bought it from; I will blame Whirlpool. Hearing all what the consumers did to try to fix the problem, it sounds like a waste of time and money. Im sorry to hear what you went through, but also I want to thank you for your complaints so I dont have to deal with it. Whirlpool sounds like a piece of junk. I’m going back to a GE.

Whirlpool Gold (Model No. GX5FHDXVY04), expensive French-Door style refrigerator , with bottom freezer pull-out drawer, purchased in 2010, has drain line that repeatedly blocks, causing frozen sheet of water on bottom of freezer and consequent leaking of water onto wood flooring (ruining said flooring). To add insult to injury, 5-year extended repair warranty I purchased specifically EXCLUDES drain lines, leading me to believe that this is a well-known problem that is costly to repair which is true because the drain line and pan on this particular model is nigh impossible to access without upending the unit (two people required) and accessing the bottom panel of the unit. This appears to me to be a design defect that Whirlpool should correct -- at its expense, not mine. I am currently reviewing possible courses of action, to include, but not limited to, BBB complaint and litigation.

Its a front loader and has lots of cycles and temperature to choose from. Its setting on a pedestal so its not too low. I dont like the way the soap is dispensed.. If you still have the door open when you pour it in the dispenser it almost comes out on you. It also knots your clothes up and makes them hard to get out. The rest is good.

Whirlpool Cabrio drain problem - I never had a washing machine that lets so much through to the drain pump. I replaced pump three times already. First of all, if you put anything with buttons in this machine, you can kiss it goodbye. This machine destroys clothes then lets buttons and coins and whatever through to destroy the fins on the discharge pump. When is the BBB going to do something about this consumer ripoff?

Product: Whirlpool Gold Series, Model WRX988SIBM01: Purchased 2014 at Lowes. 2nd day after delivery, called Whirlpool, refrigerator not working properly, freezer drawer will not close, condensation on outside. Sent person that delivered the refrigerator to fix problem, freezer had frozen ice behind each drawer approximately 2 inches that would not allow drawers to close. Delivery person used hair dryer to melt ice and adjusted drawers. Still periodically have to physically remove ice build up to allow drawers in freezer to seal properly. Ice maker stopped working, makes no ice at all, ice comes from inside refrigerator not from freezer, bad design.Today woke up to freezer drawers completely thawed and had to throw away all food, panel shows temperature at -2*. All food thawed and unable to be cooked/used. Called Whirlpool could not send someone until next Tuesday (4 days). We are a family of 5 and cannot wait that long. Unfortunately have called 3 other appliance companies only to find that refrigerator has to be repaired by special technicians! This is our first Whirlpool, bought because made in America, have been very disappointed with our $2500.00 purchase. Not sure that we will ever purchase another Whirlpool product, our inclination will be to buy less expensive product and choose to replace as opposed to paying recurring service calls + parts and labor.

I bought a new Whirlpool refrigerator at Home Depot for about $700. Six months later, suddenly, it starts making an intermittent but constant loud grinding noise and then the squeaking started. I called Home Depot first because I bought the protection plan. They referred me to Whirlpool who said the protection plan doesn’t kick in until another year after the warranty ends. It makes these noises whenever it runs, which seems to be more often (that it is running). Whirlpool may still charge $120 just for someone to come look at it even though it is under warranty. I asked another repair place and they said it might void my warranty for them to look at it instead. Whirlpool said it wouldn’t void the warranty but they would only work on it after the first repair person was finished. I’m waiting for the repair guy to come and see why it is making these loud noises. Another person with more knowledge of fridges than I have listened to the noises and said it sounds like friction in a motor. I read a review of the fridge that said the reviewer had problems after only 6 months and I thought that must be a fluke. Apparently not.

After being a faithful Whirlpool consumer for years... I no longer have any faith. I purchased an entire kitchen suite. The side by side refrigerator Nov 2013. The first refrigerator was delivered with the side cabinet deeply dented in several areas. Another was delivered 4 weeks later. Silly me... I thought, Okay, no big deal... what could go wrong? I didnt take time off work again to receive the replacement. My son took delivery (never looked at it). I get home... the front of both doors looked like they had been kicked in all the way across! To add, the cabinet sides were textured (not smooth like what I ordered) and the door handles didnt match the other appliances. So, I called HDepot & called Whirlpool (only to be on the phone an hour each time due to high call volume. Imagine?). Then Whirlpool reps are talking to me like I am some sort of idiot... saying that the refrigerator was EXACTLY the same... not possible that the handles or sides were different!!! Because it was damaged (and I mean ridiculous! ) another 8 weeks for a replacement. Frig #3 arrives and I take time off to receive it. Ah, the right refrigerator... but again ~ handles dont match. Not POSSIBLE.. Ms. _ _ _ _... it is the exact refrigerator, those are the same handles. Hours and hours on the phone to HDepot and Whirlpool. Finally, HDepot rep has a WP rep at the store when I call, and bingo! Oh yes, there are two styles of the Exact same model. The handles are ordered... 10 weeks later I finally have matching handles! But, wait... gets better. The fridge has been loud from the start, CONSTANTLY running but, not cooling some areas and freezing in others. Then when you open the freezer it is like a burst of winter wonderland is unleashed in your face. There are sheaths of ice building up on the top of the inside door. Hmm, I think what is going on? The Whirlpool designated repair company comes out. Ah, well here is part of your problem. When the refrigerator was being put together they left a few thicknesses of blue packing tape between the door and the rubber seal in the freezer. The rep tried to fix it to no avail because the door was also warped. First they were going to replace the door. Waiting for another 10 weeks. Nobody calls, whats going on? Oh, never mind, or rather... that was never happening. I have spoken to many reps with Whirlpool, I have been polite with all. In turn, from most I get curt hard ball back. The offers to resolve this from Whirlpool have been ridiculous. I am sorry for my loyalty to Whirlpool, as it has not been reciprocated. I have had two more deliveries - both the wrong unit! I never thought there were others out there. What a mess. They should recall.

Purchased a Whirlpool double door refrigerator and within a year the freezer and refrigerator doors were severely out of line. Called repairman who said the risers were broken, they were plastic and needed to be replaced. We did that. The doors were again out of line so badly that you had to push the refrigerator door side hard to get it to close. Repairman came today and stated he would recommend ditching the refrigerator as the risers in the bottom of the refrigerator are made of plastic and will continue to break. He leveled the doors but stated that they will continue to become out of line again.The repairman stated that this is a design defect in the Whirlpool refrigerator and he has replaced the risers in many of the refrigerators repeatedly. As if the refrigerator isnt enough, we own a Whirlpool Duet Washer and Dryer. Within 3 1/2 yrs the motherboard went bad in the washer and we had to replace it. The part and labor was almost $400. Whirlpool considered us a valued customer and offered us a comparable washer for $500 and they would take ours away for $20 extra. Only problem is that our original washer was $1,000 and the comparable was not as large as the one we had and did not have the stainless ours had.All I can say is if were valued customers I would wonder how they treat their less valued customers. All of this is to say that I will no longer purchase any Whirlpool products. Not only are the products below par but the customer service is non existent. They really do not care if they lose customers or not. They dont want to hear your woes about their appliances.

I have spent 30 minutes trying to change light bulb under the oven and get the cover plate back on. I watched the film on how to do it, it was amusing to watch the struggle to get it on. It was amusing to say the least. Whirlpool watching it??? I do not believe whoever designed this worthless time consuming light cover never tested it one time, or it would had been more user friendly. It amazes me what kind of trash they can build for us consumers to have to deal with at times. Tomorrow this overhead piece of junk is coming out and being replaced by a non Whirlpool one. I am going to get a tractor and smash it into little pieces and put on side of street with a note saying this is what happens when you try for an hour to change the bulb.

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

I bought this fridge 2 years ago. I had multiple repairs already. Now the side panel makes noise when you shut the door. Repairman told me it is the foam separating from the side panel. There is nothing that can be done. I also have extended warranty.

My refrigerator will be 3 years old in September. It stopped working two months after my warranty ended, in November Thanksgiving Day. I was so thankful that I had snow on my deck to keep everything cold. I had several family members in my house and watching my husband defrost a frost-free frig? This was a nightmare. Then a few weeks later, my husband company refrigerators did the same thing: freeze up and stop working. He defrosted theirs as well.I know that lots of consumers have had the same issue with any of the bottom freezer refrigerator doing the same thing. I think we, consumers, should make these company recall these lemons. Why should we have to pay more and buy more our parents had their appliances last for years. He had done this approximately 3 times since my warranty ended in September of last year. The problem is the food goes bad, the freezer ices up, causing the refrigerator to ice up and stop the air flow.I contacted the company and this is what they told me: I had to pay $295.12 to get the repair completed. It was the DEF control board. I guess others have the compressor go out and that cost over $600 to fix. Why is it our fault as a consumer buying their products promised and concern for 1 year, not 10 years. It is no wonder why America is broke? My question to the Whirlpool was, how on earth can this be the consumers fault? Here is their reply:According to the model and serial number provided, we do not indicate that there are any known recalls with this particular model. A recall requires that a product poses a threat to a persons life or health. Since this is not the case in this instance, we do not have a recall. Once a product warranty has expired, any costs for maintenance, service, or component replacements are then within the owners time frame of responsibility. Taking this into consideration, I regret to inform you that due to the age of the product, we will be unable to assist with the cost of the repair. If you have purchased an extended warranty, we would recommend contacting your extended warranty provider directly to discuss the options they provide.Oh, they sent me a postcard asking if the repair service I received was good... Yes, the company who came out did a fantastic job. I think I may have to call them back; it is acting up again. I have 90 day warranty....

I bought a 40-gallon hot water heater in November 2007. First problem I had with it was in 2009 when the pilot wouldnt stay lit. They sent me a requisition number to take to Lowe’s to pick up the part (igniter) and gave me a service number to give to the plumber to fix it. Plumber actually told me these heaters were junk and this wasnt the last problem Id have. Last Sunday (January 2012)--here we go again. Pilot went out and wont stay lit. Whirlpool is telling me its because I have a draft. Yeppers, that must be it because after they had me (arthritic 53-year old) and my disabled husband performing circus acts trying to relight it, then it was the filter on the bottom, then it was a draft. Last time I tried to light, which really someone as blind and disabled as me shouldnt be doing anyway, I about blew up. I hate getting ** by big corps. I filed a complaint with state Attorney General. If that doesnt work, hell, I think Ill take both Whirlpool and Lowe’s to small claims court. What do I have to lose? $35? Their fancy-schmancy lawyers will probably charge them a couple grand for their efforts. Im sick and tired of getting the short end of the stick. Since when is a hot water tank supposed to last a mere 4 years? Oh, by the way, Whirlpool says it’s all on me now--well see about that. First of all, both of these chumps just lost a customer and I Facebooked by friends about this pleasant experience plus included a link to this page. Consequences are all mine, I guess. Its pretty swell bathing in a sink full of water that you heated on the stove. I dont have any money because Im too busy giving it all to big insurance and big pharma right now. What a country!

We installed this furnace along with a matching 4ton a/c unit over four years ago. It was installed with a 3 zone computer controlled damper system to separately condition the three floors of our home. This furnace was ideal because it has a dual stage combustion chamber depending on how much demand there is. So besides being 95% efficient, the furnace can run at 70% or 100% heating capacity which saves on utility bills when the whole house doesn't need heat at the same time. It also had a variable speed blower which made start ups and shut downs almost unnoticeable. The blower actually ramps up to speed discreetly and adjusts itself according to the amount of back-pressure it senses. This allows it to respond to varying conditions as each of the 3 thermostats are calling for heating or cooling at different times. And yes here in St. Louis we have had days that require heat on the first floor and a/c on the third floor at the same time. The controller cycles between the two every 15 mintutes. All of these features make it ideal for our 2200sq ft three story brick home(four including the basement where it is installed). This furnace and control system along with new ductwork and dampers were able to replace the two old furnaces and a/c units originally in the home. We haven't had a single problem with it in over four years and would recommend Whirlpool Gold products to anyone I know. If I ever had to do this again in another house I would do exactly the same thing with exactly the same products.

Multiple issues with this two-year-old refrigerator. Do not buy! The exterior stainless steel doors rust in sporadic locations. According to a quick google search, it is a widely known issue that Whirlpool has not addressed. We have never used abrasive cleaners, only wipes that are made for stainless appliances. We use them on all of our stainless appliances. The fridge is the only one that now has 10+ areas of pitting rust. It continues to spread! What the heck?Secondly, the ice maker stopped working at 16 months. First it was just the auger that stopped turning. Which was inconvenient but not the end of the world. It still produced ice, but we had to open the door and pull ice out instead of having it dispensed. Now it has stopped producing ice altogether. We had the repair guy out today. Apparently, the motor for the auger and the actual ice maker are not receiving power any longer. The certified tech said it was either the main control board or bad wiring somewhere from the control board to the ice maker.For a small fortune, we can try putting in a new board. If the new board doesnt work, we will then know it is a wiring issue. If it is a wiring issue, we will have paid for a new board that was not needed, and we are out of luck completely on the wiring issue. Part of the wiring is sealed within the freezer door. A new freezer door costs nearly as much as the fridge. Part of the wiring is sealed in the back of the fridge. It is impossible to open the seal without breaking the fridge, because the back is a sealed system. But it does keep our food cold. Just dont put anything the top shelf of the fridge because it will freeze. Thanks for the 1 year warranty Whirlpool! You timed it perfectly! What a joke.

I have had this Cabrio washer and dryer for two years now and I would do better washing my things by hand. Save water, sure there is none!! I have a glass lid and I actually stood there and watched a cycle and the clothes on top never even got wet!! My whites are now gray!! Called the company to get nowhere. I am going to buy an old-fashioned washer that actually uses water. I tried to be eco-friendly but I dont like dirty clothes!!

Whirlpool Cabrio Platinum Washer - The seal on the top of the drum is breaking down. It is cracking at the bleach and soap dispenser. Somewhere in the washer drum or plate is causing holes and cuts in the clothes. The machine is only 2 years old.

I earlier filed a complaint about the Whirlpool Gold microwave arcing within a minute of cooking frozen green beans and causing burn holes in the food. We contacted Whirlpool’s customer service and were told that the machine was no longer under warranty, but we could have it serviced, repaired and have an additional year of warranty for $259. We took a pass on that. Further trial and error along with research helped us come to the realization that the arcing was caused by the high mineral content of the green beans. Whirlpool did not tell us this, but we found the information provided by others. We no longer cook the particular brand of green beans which seem to cause this event. The microwave is no longer arcing. You would think Whirlpool might be aware of this.

I bought my fridge 6 years ago. 13 months after purchase I had to replace the compressor. Last month I had to replace the water drip pan. Now the fridge is knocking and hissing again and warm inside. Compressor needs to be replaced. I contacted Whirlpool and they said 6 years is old for an appliance. Seriously!?? What about 13 months when the compressor went? They obviously dont stand behind their products. They are unable to admit I got a dud. Im so disappointed and frustrated. Stay clear!!!

This refrigerator is less than 1 yr. Old and this repair will be the FOURTH. The severe lack of craftsmanship and customer service is shocking! Most states do not have lemon laws for appliances, however something needs to be done to compensate me for THE TIME and inconvenience this caused my family. I needed to purchase a second compact refrigerator because I knew that it would break down again!

This washer is only a year old and out of warranty. At first I was getting white stains on dark clothes and now I am getting unremovable oil stains on all of my clothes. With the white stains I cut back on dry detergent and went to liquid. It did not help. On black stains I sorted clothes very carefully so that nothing dark or black was in with other color or white clothes, still the same stains. Brand new capri pants ruined with first washing. I have tried cleaning the machine with bleach as recommended, did not work. Whirlpool and Sears deny they have ever had a complaint. Yet there are hundreds of the same complaints on the internet. Is there anything that can be done.

I love this stove! It is nearly perfect. I wish it was easier to clean the glasstop, but I imagine that comes with any glasstop stove. The stove is easy to use, and I love the cooktime option. My only complaint is that the timer is very quiet, and when it is a timer while something is cooking, it only beeps once. If its a timer when nothing is cooking then it will go off repeatedly until you turn off the timer.

I am a Licensed Plumber in Oklahoma, have been for 25 years. Our company will no longer work on Whirlpool water heaters, heres why. I diagnosed a water heater that the pilot would not stay lit, the thermocouple was bad. Whirlpool Tech Support told me to go to Lowes and buy the parts and send them the receipt and they would reimburse me. The customer was furious that I charged them for the part and I told them when I got reimbursed, I would send them the money. Well, I not only never got any money from Whirlpool but I never got paid from the homeowner who was mad at me and I didn’t even sell it to them. Beware, buy Rheem.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

I bought my new ceramic top electric range/oven with convection, and the aqua-lift cleaning system in spring 2017. The aqualift cleaning function is a joke, so be prepared to be down on your hands and knees scrubbing. Im careful, and Ive not spilled anything yet, but the oven still gets splatters from roasting meats, etc. Id hate to see what Ill have to deal with when I actually let something spill. Today, as I was down on my hands and knees trying to clean it, I noticed that the enamel is chipping off where the oven racks slide in. Great. I have never had an oven where the enamel came off, much less within a year. I am struggling with heart failure, and I am not up to fighting with Whirlpool.

We purchased this washer (Whirlpool Cambrio #WTW8000BWO) in December of 2014. It is now 3 1/2 years old and while the washer worked great til just recently, we now have to purchase a different one because this one will cost too much to repair. We did not get the extended warranty. I have since read that the Cambrio has had a lot of problems. Always check the long term owners and what they have to say about the item, would never have purchased this washer had I known what the problems were and that they even were having them they should have taken it off the market til they got the situation fixed.

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

I bought a Whirlpool water heater in 2009. I paid $588.46 at Lowes. Turns out it is in a class action lawsuit for faulty thermocouple. I was given a coupon from Whirlpool for 2 new thermocouples as part of the class action lawsuit. The thermocouple goes out on it every 1-3 months. You never know when youre going to have a cold shower getting ready for work in the morning. I literally could have bought a new water heater for what Ive spent on thermocouples the last few years. The last two times it went out, I had to replace it twice within 1 day. Im sick of replacing it and have decided to install a new hot water heater. I am disgusted with Whirlpool and tried to contact them about it but have gotten no response. I will never buy another Whirlpool product and would not recommend them to anyone!

Purchased Duet Washer and Dryer just over a year ago. Recently liquid detergent has been seeping into the tumbler and damaging clothes if theyre not removed immediately after wash in complete. The precision dispenser cartridge is the culprit in my opinion. Its suppose to dispense detergent as needed however it doesnt stop dispensing. Called Whirlpool and received no satisfaction. I would not recommend the Duet washer as a new purchase. I have to pay the price for Whirlpools experimental dispensing device and I dont think its fair. Its a flawed device and they should fix it.

Purchased this Whirlpool Duet washer WFW920ww00 in 2011. 6 service calls while under 1 year warranty. The mother board was replaced..... after I smelled smoke and burning. Had trouble draining.... error codes F9E2 and F9E1 and SD (suds) and low flow were the usual. At times took 4-6 runs to get it through to point where I could open door. Often need to unplug for 20 minutes in order for it to progress. Clothes would not ring out... or be floating in water. Lately had to run on medium spin just to get it to work at all. The odor/smell was horrible and the rubber ring was black with mold after the 1st year. Completely stopped working this week, no power to panel. The repair shop said to not bother.... he has had customers replace 2 or 3 major parts in these and still keep getting the annoying error codes and difficulty making it through a complete wash. Moving on and buying something else.

I recently purchased the Whirlpool Cabrio washer and it is the worst product ever!! It does not wash the clothes, it tangles it in knots and has ruined all of my clothes because it leaves holes in the clothing. I have had multiple service calls and all of the diagnostics check out. It is a horrible product that should be recalled and Whirlpool customer service does not stand by their product. Their supervisors and customer service is very rude and I will never purchase another Whirlpool product!!! I plan on posting my complaint everywhere possible.

Recently had a Whirlpool gas water heater installed. Would smell gas every time the heater kicked on. I inspected the vent, all the new fittings, with no luck. Leaving the windows open didnt help. Finally found the problem: the factory-installed line from the gas control valve to the tank was leaking. Should have kept my old heater. It was still working flawlessly after 20 years. You would think a new heater would at least be inspected before hitting the market.

lD and UL codes are displaying. The UL code displays when the load is even and also displays UL load when I take all clothes out of washer. How could the load be uneven if there are no clothes in? I have had four different issues with this washer. I have started use on this washer in Aug. 2008 and there have been already three major repairs. I am a very dissatisfied customer. I dont know if I should spend more money on washer repairs or just buy a new washer. Please help.

My Duet Sport washer drum is damaged due to the poor quality of the bearings. I replaced the Whirlpool Duet Front Loader Washer Bearing & Seal Kit W10253866, W10253856 but because the bearings were damaged the drum is also damaged. When I opened the rear panel of the washer the bearings had literally come apart and bearings fell out. All of the floor and the oil/grease was everywhere. I replaced the bearings but it didnt matter because the drum is warped. Priced the drum and it is nearly $400.00 to replace the assembly. The cost of the drum assembly is about half the cost of a new washer. I will never buy another Whirlpool product again. Just a shame that the cost of a replacement drum is so high. What caused the bearings to just explode and damage the drum. What did I do to cause this? Absolutely nothing. I have since discovered that this is has happened to scores of people with this same washer.

Purchased this beautiful sleek Cabrio washer in May 2012 from Appliance Smart, with its modern looking glass top, it looked so nice. The washer itself works ok for now, but it does unbalance a lot, thats not main issue. We deal with that. The poor design of holding that sleek glass top in is the problem. After a little over two years, it started cracking at the hinge that is just mounted in Plastic which holds the whole lid down, including the heavy glass. The glass started raising up, causing steam to escape. The lid is rubbing and very difficult to open. Appliance Smart is gone now.. We called the service repair person about 6 months ago, he looked at it, said its a problem that is not covered on our warranty and it would be approx $350.00 to repair!! So today, tomorrow or next week it will stop working because the lid is popping off! Its a terrible design, dont be fooled by its sleek look. The manufacturer takes no responsibility for this major design flaw. Beware, the very thing you need to be fixed wont be covered under warranty, lemon law, or just good customer service. We have owned several Whirlpool appliances and doubt that we will own one again, due to the way this issue was handled by Whirlpool.

I bought a Whirlpool CABRIO washing machine. I was assured it would do large & bulky. I didnt realize that being so called energy efficient meant that it didnt put enough water in to get my clothes saturated! On large loads or bulky items when I put in my laundry detergent only to find out I had to try to wash them again. Parts of the clothes would still be unwashed & dry after going through a whole cycle! After washing the clothes that did get clean comes out looking like I took them to a stream and washed them on rocks. After taking care of my clothes so they didnt look as old as they were, they are now faded & old looking. I hate this washing machine!

My Whirlpool range, was purchased 14 years ago. It was fine until 2 months ago. I was preparing a meal for a dinner party and the oven went from low baking into Clean mode. (This cant be done by accident, it is many step process to go into clean mode) Locking the door! When I realized what was happening I immediately turned the breaker off but we still could not open the range door. Since the oven had my potato casserole and my Teflon coated cookie sheets inside it started to emit a toxic smell choking all of us inside the house. The unit was too hot to touch so my husband and brother-in-law finally donned gloves and got the range outside. I called Whirlpool the next morning and got the run around as to what type of range it was Kenmore/Whirlpool. Whirlpool finally sent someone out to look at the range and their determination was it caught on fire and melted! The company will not do anything about the unit or all the damage it cause because the range is over 10 years old. But they did not tell me this until I had spent weeks getting estimates and gathering information for them. I TOLD THEM DURING THE INITIAL CALL THE RANGE WAS 14 YEARS OLD. I TOLD THEM THE EXACT DATE IT WAS PURCHASED. Whirlpool sent me a letter from their Claims Resolution Department saying my DISHWASHER will not be covered and misspelling my last name. I have tried to call the person ** at least 25 times and she never answers the phone, only get her voicemail. I just wanted to tell them I was a little concerned about their accuracy with the typing of the name and product..... How complete could the investigation have been if they didnt even get the product correct.The smoke/smell ruined my microwave and ceiling fan. We had to paint the ceiling, redo wallpaper and professionally clean all the carpets and drapes on my first floor (we had just remodeled our kitchen last May so this was an expensive redo not in the budget. Not to mention the cost of a new range). I will NEVER buy a Whirlpool again. And I want to spread the word about the possibility of your range having the same problem.

This washer is an extremely poor choice if you wash clothes. It has so little water it does not dissolve HE detergent, Clorox 2, or OXI Clean. After even one wash it does not clean your laundry. If you choose to wash your sheets (even though there is a sheets and deep washer setting) its a joke. I could do better by washing things in the tub. I realize its a low usage water washer but you cannot even add more water unless you put it in with a bucket.

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

I purchased a Whirlpool Duet HE front end loading washing machine. Less than two years after purchase, the machines tub and bearings failed amounting to a repair bill of $1035.00. Fortunately for me, or so I thought, I purchased an extended warranty for the machine. However, even though the complaint department was aware of the failure, the amount of the repair and the fact that I declined repair and was opting for the $500 reimbursement option, I was told that the claim, as it was called, would take 2-3 business days to process and if I was awarded (his words) the reimbursement, I could only use this money on a new machine at a Sears store and not on any new, but previous year model, or at a Sears outlet. None of these things were related to me when they took my $214.00 for the warranty. In all, my original washing machine of 22 months will have cost me $1414.00. My new washing machine, if awarded one, will cost approximately $400. The total cost to wash clothes for 10 months will exceed $1,800.00. Do not purchase Whirlpool front end loaders because the drum bearings will break (that is why they exclude them from extended warranties) and do not buy extended warranties as Sears makes out in the end.

As a busy mom with 11 children, I needed a refrigerator that could stand up to the demands of my family. This refrigerator is great and meets my needs, but could use a few improvements. The side refrigerator shelves are not on very sturdy. When my daughter removed a jar of mustard, the shelf came off the door, fell onto the floor and broke. This could be solved by improving the gripping strength (increase depth) of the refrigerator door shelf holders. Additionally, the sliding freezer shelf is always crooked and has to be manipulated into place. This is most problematic when the freezer shelf is full. The freezer is not smudge-proof, but clean up is easy with a damp towel.

Purchased the oven in summer 2015. Very disappointed in the AquaLift Self-Cleaning oven. Absolutely useless. Does absolutely nothing and I end up cleaning the oven by hand. As a senior citizen, this is uncomfortable; I have injured my leg in the process and now feel I must wipe the oven down after each use. I was so looking forward to having a nice clean oven at all times and its not happening. This is of no value to me.

Bought a new set of Whirlpool Cabrio Platinum tin replace my Maytag that had finally died. I believe this is the worst set Ive ever owned. It wasnt inexpensive but its cheaply built. Cant wash a set of sheets without it getting out of balance, even if you carefully place them in the washer as they recommend. They knock up no matter what you do. The dryer is gas and my clothes still have to be turned back on for more time that should take. We are talking about over an hour. Ive had them just a few months but Ive had it. I want my washer and dryer to just do their jobs like you expect. Im selling them or donating them but whichever they are out of here. Whirlpool, I am ashamed of you. Putting out such a poorly made washer and dryer. Instead of the name Platinum. They should be named Salvage. Never again Whirlpool. Never Again!!!

We have had our Whirlpool oven for 3 years now. They make top of the line products and the oven cooks very well. I have cooked a lot of cakes and cupcakes in my Whirlpool oven. If I had to buy another oven it would be a Whirlpool.

Chris from Whirlpool contacted me the same day that I filed my complaint. He offered to replace our water heater at no charge. We will pick up our new water heater this weekend and install it. Hopefully, it is designed better than our current water heater.

1st item - ice pooling at bottom of freezer, now repaired at a cost of $100. 2nd item - 1 day later fridge/freezer keeps shutting off and on irregularly. Cant contact anyone one from Whirlpool on a weekend and Trail Appliances doesnt have anyone available to come and look at it and if they did it would cost us another $100+ with no guarantee and we were told by Trail the Whirlpool will not touch it if someone else does. From what I have read seems we now a victim of Whirlpool. P.s. for those who dont know yet Whirlpool not only now owns Bastemp, they also are the makers of Kenmore and those fridges have experience the same ice issues.